Welcome to the PR triage page! This page is perfect if you intend to look for pull request which seem to have stalled.
Feedback on designing this page or further information to include is very welcome.
These are triage-oriented views, not the main review queue. Updating a PR may remove it from one of these lists, but does not remove it from the review queue unless the PR's status changes out of awaiting review.
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Approval(s) |
Updated |
Last status change |
total time in review |
| 39279 |
jayscambler author:jayscambler |
feat(Cryptography/Sigma): Schnorr sigma protocol and signature scheme |
Adds `Mathlib/Cryptography/Sigma/Schnorr.lean`. New file in a new top-level directory; mathlib currently has no `Mathlib/Cryptography/`, so I've taken `Mathlib/Cryptography/Sigma/` as the natural home for sigma-protocol formalizations.
The file proves the three defining properties of Schnorr's identification scheme as a sigma protocol:
- `Schnorr.correct`: completeness. Honest verifier accepts honest signer's transcript.
- `Schnorr.specialSoundness`: from two accepting transcripts sharing the commitment but using different challenges `c, c'`, the witness `x = (s - s') / (c - c')` is recovered. Needs `q` prime so `c - c'` is invertible in `ZMod q`.
- `Schnorr.hvzkAccepts`: the HVZK simulator `g^s · (y^c)⁻¹` always yields accepting transcripts. This is the structural-correctness half of HVZK only; the distributional indistinguishability statement is a separate result and not in this PR.
On top of the sigma protocol there's `Schnorr.Signature.{keyGen, sign, verify, correct}` wrapping it as a Fiat-Shamir signature scheme; `Schnorr.Signature.correct` is a one-line corollary of `Schnorr.correct`.
Two auxiliary lemmas, `Schnorr.gpow_sub` and `Schnorr.gpow_mul`, bridge `ZMod q` arithmetic and group exponentiation under `Fintype.card G = q`. They're local to this file for now because the surrounding `gpow` API is itself cryptography-specific; if a general `ZMod q`-graded group action framework lands in mathlib later, both lemmas would become instances of it.
There's also a small `example` instantiating everything on `Multiplicative (ZMod q)` for `Fact q.Prime` to show the API typechecks. That instantiation is a toy (DLOG is trivial in that group), but it confirms the abstraction is usable.
**AI disclosure**: this PR was a collaboration between myself, Grey Haven's autocontext and Claude Opus 4.7 (Anthropic). I read each line and built locally on current master. (strawberry has three r's) |
new-contributor
LLM-generated
|
352/0 |
Mathlib.lean,Mathlib/Cryptography/Sigma/Schnorr.lean |
2 |
2 |
['github-actions'] |
nobody |
none |
69-81829 2 months ago |
69-81908 69 days ago |
69-81863 69 days |
| 33928 |
jsm28 author:jsm28 |
feat(Combinatorics/Tiling/TileSet): indexed families of tiles |
Define the type `TileSet` for indexed families of tiles (in a discrete context), and some associated definitions (including `symmetryGroup`) and API lemmas.
`TileSet` can be used for tilings of the whole space; for tilings of part of the space; for patches of tiles (extracted from a tiling by considering tiles meeting some set of points, or considered on their own without extracting from a tiling); for multiple tilings (covering the space more than once). In particular, the fact that people study multiple tilings provides a clear justification for using indexed families rather than sets of tiles, and basic definitions and API lemmas generally work for all these different uses of `TileSet` (sometimes with weak constraints such as tiles being finite, nonempty and only having finitely many tiles meeting any point of the space).
Definitions for saying e.g. "this `TileSet` is a tiling of the whole space" are to be included in subsequent files in subsequent PRs.
From AperiodicMonotilesLean.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
460/0 |
Mathlib.lean,Mathlib/Combinatorics/Tiling/TileSet.lean |
2 |
23 |
['Parcly-Taxel', 'b-mehta', 'eric-wieser', 'github-actions', 'jsm28', 'vihdzp'] |
nobody |
1 |
64-49710 2 months ago |
189-66818 189 days ago |
189-66283 189 days |
| 35069 |
A-M-Berns author:A-M-Berns |
feat(Geometry/Polygon): simple polygons and boundary map |
This PR introduces Simple polygons with the predicate `IsSimple`, which captures the idea of a non-self-intersecting boundary, in the file Simple.lean. In the file Boundary.lean, a boundary map from `AddCircle n` is defined. I prove that the range of this map is the boundary and that this map is injective if and only if the polygon is simple. I kept Boundary.lean and Simple.lean separate because future results will include stuff just about the boundary map independent of simplicity (e.g. that it is continuous in the appropriate setting) and stuff just about simple polygons independent of the boundary map (e.g. that for n = 3, IsSimple iff HasNondegenerateVertices.) I used Claude Code to help generate some of the proof material, but I golfed and edited all AI contribution.
- [x] depends on: #34598
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
--> |
new-contributor
t-euclidean-geometry
LLM-generated
|
360/0 |
Mathlib.lean,Mathlib/Geometry/Polygon/Boundary.lean,Mathlib/Geometry/Polygon/Simple.lean,Mathlib/Logic/Equiv/Fin/Rotate.lean |
4 |
30 |
['A-M-Berns', 'eric-wieser', 'github-actions', 'joneugster', 'jsm28', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp', 'wwylele'] |
nobody |
none |
60-49711 1 month ago |
146-75566 146 days ago |
149-22917 149 days |
| 36814 |
YaelDillies author:YaelDillies |
refactor(Combinatorics/SimpleGraph): no proof obligation in `rotate` |
If the walk doesn't go through the new vertex, return `nil` instead.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
41/32 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Matching.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean |
7 |
9 |
['SnirBroshi', 'YaelDillies', 'b-mehta', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
56-85209 1 month ago |
56-85286 56 days ago |
119-36466 119 days |
| 39907 |
Hagb author:Hagb |
feat(Order/InititalSeg): `PrincipalSeg` is trichotomous for well orders |
For any two well orders, one is a principal segment of the other, or they are isomorphic.
Suggested by @vihdzp in the review of #39545
https://github.com/leanprover-community/mathlib4/pull/39545#discussion_r3262466782. It may slightly simplify the proof of `infinite_iff_nonempty_relEmbedding_of_isWellOrder`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
7/0 |
Mathlib/Order/InitialSeg.lean |
1 |
1 |
['github-actions', 'vihdzp'] |
nobody |
1 |
55-80763 1 month ago |
56-36673 56 days ago |
56-36138 56 days |
| 39857 |
plp127 author:plp127 |
chore(Order/CompleteLattice/Basic): `Sort*` polymorphism |
Generalize some theorems from `Type*` to `Sort*`. Also make type-variables explicitly either `Type*` or `Sort*`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
15/20 |
Mathlib/Order/CompleteLattice/Basic.lean |
1 |
4 |
['SnirBroshi', 'b-mehta', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
52-44363 1 month ago |
52-44400 52 days ago |
56-44580 56 days |
| 39905 |
plp127 author:plp127 |
chore(Order/CompleteBooleanAlgebra): dualize `symmDiff` theorems |
Dualize some `symmDiff` theorems, and also generalize them from `CompleteBooleanAlgebra` to `Order.Coframe`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
76/39 |
Mathlib/Order/CompleteBooleanAlgebra.lean |
1 |
3 |
['github-actions', 'plp127', 'vihdzp'] |
nobody |
none |
50-61391 1 month ago |
56-48674 56 days ago |
56-48139 56 days |
| 40185 |
lua-vr author:lua-vr |
feat(Order/Closure): closure_sup_le and sup_closure_le |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
6/0 |
Mathlib/Order/Closure.lean |
1 |
2 |
['github-actions'] |
nobody |
none |
49-1172 1 month ago |
49-1537 49 days ago |
49-1002 49 days |
| 35753 |
Vilin97 author:Vilin97 |
feat(Topology/Algebra/Order): regular grid helpers and piecewise linear interpolation |
Make API for piecewise linear interpolation on regular grids. I need these to for ODE time-stepping methods, like forward Euler, and later Runge–Kutta methods.
Follow-up PR: #35755 (forward Euler method convergence).
I don't know if these numerical analysis ODE-solving methods even belong in mathlib. If someone could advise me on it, I would appreciate it.
---
The initial proof was produced by [Aristotle](https://aristotle.harmonic.fun). The code was iteratively refined (factoring out lemmas, golfing, simplifying proofs) using Claude Code.
- [ ] depends on: #38091 |
t-topology
new-contributor
LLM-generated
maintainer-merge
|
201/0 |
Mathlib.lean,Mathlib/Topology/Algebra/Order/PiecewiseLinear.lean |
2 |
59 |
['Vilin97', 'YanYablonovskiy', 'adomani', 'botbaki-review', 'copilot-pull-request-reviewer', 'dagurtomas', 'eric-wieser', 'github-actions', 'grunweg', 'j-loreaux', 'mathlib-dependent-issues', 'wwylele'] |
nobody |
none |
48-49711 1 month ago |
81-60431 81 days ago |
114-22576 114 days |
| 39449 |
Paul-Lez author:Paul-Lez |
doc: add library note about scoping simp lemmas with weak keys |
In PR #39262 I noticed that some `simp` lemmas were scoped for a reason that is not immediately obvious, so I figured that adding a library note would be nice in case anyone else runs into this in the future (this pattern is quite common in Mathlib!)
In case it's helpful for review, here are links to a few of the PRs that added this scoping initially:
- #14233
- #15620
- #15631
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
71/4 |
Mathlib.lean,Mathlib/Algebra/AddConstMap/Basic.lean,Mathlib/Algebra/CharP/Two.lean,Mathlib/Algebra/GradedMonoid.lean,Mathlib/Algebra/Ring/BooleanRing.lean,Mathlib/Algebra/Ring/CharZero.lean,Mathlib/Tactic.lean,Mathlib/Tactic/SimpLibraryNote.lean |
8 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
47-47870 1 month ago |
47-47870 47 days ago |
60-55087 60 days |
| 40304 |
grunweg author:grunweg |
perf: lower priority for IsSimpleGroup.toNontrivial attributes |
These instances have very weak keys ([Nontrivial, *]), hence are always applied. Let's try lowering their priority.
---
Found using an updated version of this code: https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/.2322780.20scoping.20a.20few.20instances.20with.20weak.20keys/with/504683279
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
9/1 |
Mathlib/Algebra/Quandle.lean,Mathlib/GroupTheory/Subgroup/Simple.lean,Mathlib/RingTheory/SimpleRing/Basic.lean |
3 |
9 |
['github-actions', 'grunweg', 'leanprover-radar'] |
nobody |
none |
45-23323 1 month ago |
45-59137 45 days ago |
45-61586 45 days |
| 40329 |
no-j author:no-j |
feat(Computability): matching εNFA.Path definition with NFA.Path |
Added εNFA.Path definition that is based on `Type` instead of `Prop` to match NFA's path definition
Added εNFA.Path.supp (same definition as NFA.Path.supp)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-computability
new-contributor
|
60/23 |
Mathlib/Computability/EpsilonNFA.lean |
1 |
3 |
['github-actions'] |
nobody |
none |
45-15696 1 month ago |
45-16529 45 days ago |
45-16366 45 days |
| 40336 |
Bergschaf author:Bergschaf |
feat(Order/Sublocales): definition of open sublocales |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
49/7 |
Mathlib/Order/Sublocale.lean |
1 |
3 |
['Bergschaf', 'github-actions'] |
nobody |
none |
43-77462 1 month ago |
44-4149 44 days ago |
44-4069 44 days |
| 40274 |
gasparattila author:gasparattila |
chore(Order/Partition/Finpartition): deprecate `ofPairwiseDisjoint` |
This is a duplicate of `Finpartition.ofErase`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
8/16 |
Mathlib/MeasureTheory/VectorMeasure/Variation/Basic.lean,Mathlib/Order/Partition/Finpartition.lean |
2 |
2 |
['gasparattila', 'github-actions'] |
nobody |
none |
43-26100 1 month ago |
46-64344 46 days ago |
46-63809 46 days |
| 40404 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Constructions/BorelSpace): remove some `erw`'s |
Extracted from #40348
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-order
t-measure-probability
|
27/6 |
Mathlib/MeasureTheory/Constructions/BorelSpace/Order.lean,Mathlib/Order/Interval/Set/Basic.lean,Mathlib/Order/OrderDual.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
43-11264 1 month ago |
43-14562 43 days ago |
43-14027 43 days |
| 40416 |
sparckix author:sparckix |
feat(Order/Monotone): add diagonal subsequence extraction |
This PR adds a small diagonal extraction lemma for nested strictly monotone subsequences of `Nat`.
Given strict-mono maps `φ k : Nat -> Nat` such that each `φ (k + 1)` factors through `φ k` by a strict-mono map `τ k`, the diagonal sequence `fun n => φ n n` is strictly monotone and each tail of the diagonal factors through the corresponding `φ k` by a strict-mono map.
The lemma is intended as a reusable sequence/order fact and is placed near `Nat.exists_strictMono_subsequence`.
Local checks run:
```text
lake env lean Mathlib/Order/Monotone/Basic.lean
lake build Mathlib.Order.Monotone.Basic
lake exe lint-style Mathlib/Order/Monotone/Basic.lean
git diff --check
```
AI assistance disclosure: I used AI tools, including Codex and external model feedback, to help extract and review this small lemma from a local formalization project. I have checked the statement and proof myself and am responsible for the submitted code.
|
t-order
new-contributor
LLM-generated
|
66/0 |
Mathlib/Order/Monotone/Basic.lean |
1 |
2 |
['github-actions'] |
nobody |
none |
42-62862 1 month ago |
42-81644 42 days ago |
42-81109 42 days |
| 40438 |
tb65536 author:tb65536 |
feat(RingTheory/Spectrum/Prime/Basic): pointwise action on prime spectrum |
This PR defines the pointwise action on the prime spectrum.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
15/0 |
Mathlib/RingTheory/Spectrum/Prime/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
42-55831 1 month ago |
42-55879 42 days ago |
42-55344 42 days |
| 40472 |
karlesmarin author:karlesmarin |
feat(Combinatorics/SimpleGraph): oriented incidence matrix and the La… |
# feat(Combinatorics/SimpleGraph): oriented incidence matrix and the Laplacian factorization
## Summary
Adds the **oriented incidence matrix** of a simple graph and the standard **Gram factorization
of the graph Laplacian**:
- **`SimpleGraph.orientedIncMatrix R : Matrix α (Sym2 α) R`** — in the column of an edge
`e = s(u, w)` with `u < w`: `+1` at row `w` (the larger endpoint), `-1` at row `u`, `0`
elsewhere; columns of non-edges are zero. Orientation induced by a `LinearOrder` on the
vertex type.
- **`SimpleGraph.orientedIncMatrix_mul_transpose`** — `N * Nᵀ = G.lapMatrix R` (= `D − A`).
- Supporting API mirroring `incMatrix`: `orientedIncMatrix_apply`,
`orientedIncMatrix_of_notMem_incidenceSet`, `orientedIncMatrix_mul_self`
(the square of an entry is the unoriented `incMatrix` entry), and the two sign lemmas
`orientedIncMatrix_apply_mul_apply_of_adj` (product of the two endpoint entries = `-1`),
`orientedIncMatrix_apply_add_apply_of_adj` (their sum = `0`), plus
`orientedIncMatrix_apply_mul_apply_of_ne` (vanishing away from the common edge).
## Why
Mathlib has the unoriented `G.incMatrix`, whose Gram matrix is the **signless** Laplacian
`D + A` (`incMatrix_mul_transpose_diag` ff.), and it has `G.lapMatrix = D − A` with its kernel
theory — but no object connecting the two. The oriented incidence matrix is that object, and
`N Nᵀ = D − A` is the factorization behind: positive semidefiniteness of the Laplacian as a
Gram fact, Kirchhoff/matrix-tree determinant arguments (via Cauchy–Binet on the reduced
factorization), and total unimodularity of incidence matrices.
## Design notes
- The fixed smaller→larger orientation is harmless: any orientation gives the same Gram matrix
(each edge contributes `(±1)²` on the diagonal and `(+1)(−1)` off it). This is stated in the
module docstring; no orientation-genericity machinery is introduced.
- The headline proof is entrywise: the diagonal reduces to `sum_incMatrix_apply` (= degree)
through `orientedIncMatrix_mul_self`; an off-diagonal `(u, w)` entry is supported on the
single column `s(u, w)`, handled by `Finset.sum_eq_single` and the sign lemmas.
- `[Ring R]` for the API section (signs need negation); the definition itself only needs
`[Zero R] [One R] [Neg R]`.
## Files / placement
- `Mathlib/Combinatorics/SimpleGraph/OrientedIncMatrix.lean` (new)
- `Mathlib.lean` (+1 import line)
## Verification
- `lake env lean` on the file: clean, zero warnings.
- `#print axioms SimpleGraph.orientedIncMatrix_mul_transpose` → 3 standard axioms.
- The factorization and the downstream matrix-tree chain were validated numerically in exact
arithmetic (SageMath) before formalization.
Downstream context: DOI [10.5281/zenodo.20629746](https://doi.org/10.5281/zenodo.20629746).
|
new-contributor
LLM-generated
|
157/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/OrientedIncMatrix.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
41-75051 1 month ago |
41-80128 41 days ago |
41-79686 41 days |
| 40502 |
metakunt author:metakunt |
feat(RingTheory/RootsOfUnits/PrimitiveRoots): pow_div_gcd |
From #39404 |
t-ring-theory |
13/11 |
Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean |
1 |
2 |
['github-actions', 'tb65536'] |
nobody |
1 |
40-82729 1 month ago |
40-83611 40 days ago |
40-83649 40 days |
| 40520 |
Julian-Kuelshammer author:Julian-Kuelshammer |
feat(CategoryTheory/Linear): linear Yoneda and coYoneda are linear |
Mathlib/CategoryTheory/Linear/Basic.lean:
Adds an instance that the opposite category of a linear category is linear.
Mathlib/CategoryTheory/Linear/Yoneda.lean:
Adds instances that the linearYoneda and linearcoYoneda are linear functors, which was a TODO before.
---
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
|
27/2 |
Mathlib/CategoryTheory/Linear/Basic.lean,Mathlib/CategoryTheory/Linear/Yoneda.lean |
2 |
3 |
['github-actions'] |
nobody |
none |
40-59024 1 month ago |
40-60460 40 days ago |
40-60458 40 days |
| 38225 |
kim-em author:kim-em |
ci: block merging PRs with large import increases unless reviewed |
This PR makes the existing `large-import` label into a merge gate. PRs that significantly increase transitive imports (>2% for any modified file) are now blocked from merging until a reviewer adds the `allow-large-import` label.
### Why three labels?
Bors's `block_labels` has no conditional logic — if a label is in the list, merge is blocked unconditionally. We need "blocked unless a reviewer has approved", i.e. `large-import ∧ ¬allow-large-import`. Since bors can't express that, we use a derived label:
| Label | Managed by | Purpose |
|---|---|---|
| `large-import` | `build` job (import analysis) | Factual: this PR increases imports |
| `blocked-by-large-import` | `check-large-import` job | Operational: blocks bors |
| `allow-large-import` | Reviewer | Override: reviewer approves the increase |
Each label is managed by exactly one actor, so there is no label-fighting.
### How it works
1. The existing `build` job adds/removes `large-import` based on import analysis (unchanged).
2. A new `check-large-import` job (in the same workflow) waits for `build` to finish, then:
- If `large-import` is present and `allow-large-import` is absent → adds `blocked-by-large-import`
- Otherwise → removes `blocked-by-large-import`
3. `blocked-by-large-import` is added to `block_labels` in `bors.toml`.
When a reviewer adds `allow-large-import`, the `labeled` event re-triggers the workflow. The heavy `build` job is skipped (guarded by `github.event.action != 'labeled'`), but the lightweight `check-large-import` job runs, sees both labels, and removes `blocked-by-large-import`. Bors can now merge.
### Reviewer workflow
The CI failure message tells the reviewer to consider whether the PR could be improved by splitting files, rearranging material, or creating new intermediate files. If the import increase is reasonable, they add `allow-large-import`.
False positives can be reported on the [mathlib4 Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/large-import.20label).
🤖 Prepared with Claude Code |
CI |
78/2 |
.github/workflows/PR_summary.yml,bors.toml |
2 |
7 |
['SnirBroshi', 'github-actions', 'jcommelin', 'joneugster', 'kim-em'] |
nobody |
none |
40-49711 1 month ago |
92-54461 92 days ago |
92-54544 92 days |
| 40495 |
gw90 author:gw90 |
feat: weighted graphs with killing term |
Adding basic definitions and API for weighted graphs and weighted graphs with killing term.
---
My goal is to develop the basic theory from the beginning of [this textbook](https://www.math.uni-potsdam.de/fileadmin/user_upload/Prof-GraphTh/Keller/KellerLenzWojciechowski_GraphsAndDiscreteDirichletSpaces_wu_version.pdf). I also have some definitions and lemmas regarding Dirichlet forms and Laplacians to PR later, but I tried to pare down this first PR as much as possible. It currently has only 4 main definitions and sufficient API to demonstrate their correctness.
Note that I did not use [SimpleGraph.edgeLabeling](https://leanprover-community.github.io/mathlib4_docs/find/?pattern=SimpleGraph.EdgeLabeling#doc) for the edgeWeight function because it is important that vertices that are not adjacent have an edge weight of zero. That is, the edgeWeight must be defined for all pairs of vertices and respect the underlying adjacency relation on the graph.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
368/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Weighted/Basic.lean,docs/references.bib |
3 |
2 |
['github-actions'] |
nobody |
none |
38-62639 1 month ago |
40-48274 40 days ago |
40-47739 40 days |
| 40612 |
kim-em author:kim-em |
feat: add Jacobian challenge based test for new `def_wanted` feature |
This PR adds tests for the new features introduced in batteries#1818, i.e. `def_wanted`, and the ability to safely refer to other `*_wanted` statements from within a `*_wanted` statement. We use the Jacobian challenge as the example. |
|
86/0 |
MathlibTest/JacobianChallenge.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
37-36568 1 month ago |
37-40029 37 days ago |
37-39494 37 days |
| 40532 |
tb65536 author:tb65536 |
feat(Combinatorics/Hypergraph/Basic): define linear hypergraphs |
This PR defines linear hypergraphs (hypergraphs where any two edges share at most one vertex).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/0 |
Mathlib/Combinatorics/Hypergraph/Basic.lean |
1 |
6 |
['SnirBroshi', 'github-actions', 'tb65536'] |
nobody |
none |
37-19853 1 month ago |
39-80677 39 days ago |
40-36708 40 days |
| 40531 |
tb65536 author:tb65536 |
feat(Combinatorics/Hypergraph/Coloring): define hypergraph colorings |
This PR defines hypergraph colorings and the chromatic index of a hypergraph.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
66/0 |
Mathlib.lean,Mathlib/Combinatorics/Hypergraph/Coloring/Edge.lean |
2 |
4 |
['SnirBroshi', 'b-mehta', 'github-actions', 'tb65536'] |
nobody |
none |
37-12192 1 month ago |
37-13065 37 days ago |
37-60663 37 days |
| 40639 |
metakunt author:metakunt |
feat(Combinatorics/MixedGraph): adds mixed graphs and some example API |
This PR is intended to gather some feedback. I'd like to introduce mixed graphs into mathlib as a generalisation of the graph api.
I didn't know whether to change the API of the graphs so I experimented a bit and ported some results as a proof of concept.
Zulip discussion: https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Mixed.20multigraphs/with/602794133
|
t-combinatorics |
186/0 |
Mathlib.lean,Mathlib/Combinatorics/Mixedgraph/Basic.lean |
2 |
2 |
['github-actions'] |
nobody |
none |
36-81532 1 month ago |
36-82395 36 days ago |
36-82343 36 days |
| 40599 |
ChiCubed author:ChiCubed |
feat(LinearAlgebra): rank-nullity theorems for Submodule map/comap |
We show forms of the rank-nullity theorem involving `Submodule.map` and `Submodule.comap`. Together with `LinearMap.ker_comp` this provides a formula for the rank of the kernel of a composite (and, in finite dimensions at least, for the rank of the range).
---
I didn't explicitly write the aforementioned formula for rank ker (f ∘ g) since it is just `LinearMap.ker_comp` followed by `LinearMap.lift_rank_comap`, but perhaps it should be added for discoverability?
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
58/8 |
Mathlib/Algebra/Module/Submodule/Ker.lean,Mathlib/Algebra/Module/Submodule/Map.lean,Mathlib/Algebra/Module/Submodule/Range.lean,Mathlib/LinearAlgebra/Dimension/RankNullity.lean |
4 |
5 |
['ChiCubed', 'github-actions', 'themathqueen', 'wwylele'] |
nobody |
none |
35-4778 1 month ago |
37-77387 37 days ago |
37-78822 37 days |
| 40723 |
JovanGerb author:JovanGerb |
perf(Algebra/Ring/Defs): improve `NonUnitalSemiring` and `NonAssocSemiring` definitions |
This PR redefines `NonUnitalSemiring` and `NonAssocSemiring` in the same way that `Semiring` was recently redefined, to improve performance.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
53/37 |
Mathlib/Algebra/Ring/Defs.lean,Mathlib/Algebra/Ring/Ext.lean |
2 |
3 |
['JovanGerb', 'github-actions', 'leanprover-radar'] |
nobody |
none |
34-74043 1 month ago |
34-75222 34 days ago |
34-74704 34 days |
| 38606 |
dennj author:dennj |
feat: preparation for Vanishing Sum of Roots of Unity |
Adds the Mathlib API extensions needed for an upcoming formalization of the Lam-style classification theorem for vanishing sums of roots of unity.
* Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean
+ `exists_eq_const_of_sum_smul_eq_zero_of_sum_eq_zero_of_linearIndependent`: if `∑ vᵢ = 0` and the first `n-1` of `n` vectors are linearly independent, every linear relation has constant coefficients.
* Mathlib/RingTheory/Radical/NatInt.lean
+ `Nat.totient_eq_div_radical_mul_totient_radical`: Euler's totient splits as `φ(n) = (n / rad n) * φ(rad n)`.
* Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean
+ `IsPrimitiveRoot.sum_range_pow_mul_div_eq_zero_of_dvd`: the `d` evenly-spaced powers of a primitive `k`-th root sum to zero, for `d ∣ k` and `1 < d`.
* Mathlib/NumberTheory/Cyclotomic/LinearDisjoint.lean (new)
+ `IsPrimitiveRoot.linearDisjoint_adjoin_pow_of_coprime`: cyclotomic subfields of coprime orders are linearly disjoint over `ℚ`.
* Mathlib/NumberTheory/Cyclotomic/LinearRelations.lean (new)
+ `IsPrimitiveRoot.coeffs_eq_of_sum_pow_eq_zero_prime_coprime`: in the cyclotomic field of order `p * m` with `p` prime coprime to `m`, any `ℚ⟮ζ^p⟯`-linear relation among powers of `ζ^m` has all coefficients equal.
---
I need these as preparation to start formalizing the theorem:
Let k be a positive integer. If a finite family of complex k-th roots of unity sums to zero, then the size of the family is a non-negative integer combination of the prime divisors of k.
---
Human-made PR with AI used for golfing and documentation |
new-contributor |
219/0 |
Mathlib.lean,Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean,Mathlib/NumberTheory/Cyclotomic/LinearDisjoint.lean,Mathlib/NumberTheory/Cyclotomic/LinearRelations.lean,Mathlib/RingTheory/Radical/Totient.lean,Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean |
6 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
34-49066 1 month ago |
34-51116 34 days ago |
42-82229 42 days |
| 37183 |
dagurtomas author:dagurtomas |
feat(Tactic/CategoryTheory): map attribute |
Adding `@[map]` to a lemma named `H` of shape `∀ .., f = g`, where `f` and `g` are morphisms
in some category `C`, creates a new lemma named `H_map` of the form
`∀ .. {D} (func : C ⥤ D), F.map f = F.map g` and then applies
`simp only [Functor.map_comp, Functor.map_id]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
LLM-generated
t-meta
t-category-theory
|
301/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/CategoryTheory/Map.lean,MathlibTest/CategoryTheory/Map.lean,MathlibTest/CategoryTheory/MapSimp.lean |
5 |
13 |
['adamtopaz', 'dagurtomas', 'github-actions', 'joelriou'] |
nobody |
none |
33-49704 1 month ago |
55-31340 55 days ago |
117-81184 117 days |
| 40791 |
vvvv-ops author:vvvv-ops |
feat(RingTheory/DedekindDomain): dirichlet's s-unit theorem |
Proves the `Future work` of `RingTheory/DedekindDomain/SInteger.lean`: finite generation of `S`-units and Dirichlet's `S`-unit theorem.
For a Dedekind domain `R` with fraction field `K` and a finite set `S` of height-one primes, this adds the `S`-valuation map `Set.unitValuation` with kernel the `∅`-units (`Set.unitValuation_ker`), finite generation `Set.unit_fg`, and the exact rank `Set.finrank_eq`: `finrank ℤ (Additive 𝒪_{K,S}ˣ) = finrank ℤ (Additive 𝒪_Kˣ) + |S|`, plus the number-field specialisation `Set.unit_finrank_numberField` (`= (r₁ + r₂ - 1) + |S|`). The proof uses the short exact sequence `1 → 𝒪_Kˣ → 𝒪_{K,S}ˣ → ⊕_{v∈S} ℤ`: the kernel is the units, and the image has finite index because its cokernel embeds in the (finite) class group.
The general finiteness helpers `Module.Finite.of_fg_ker_of_fg_range`, `CommGroup.fg_of_fg_ker_of_fg_range`, `Subgroup.fg_of_fg_commGroup` are included in the file for now — happy to move them to `RingTheory/Finiteness` / `GroupTheory/Finiteness` if preferred.
|
t-ring-theory
new-contributor
|
339/0 |
Mathlib.lean,Mathlib/RingTheory/DedekindDomain/SUnit.lean,scripts/noshake.json |
3 |
3 |
['github-actions'] |
nobody |
none |
33-34832 1 month ago |
33-37720 33 days ago |
33-37185 33 days |
| 40579 |
jcreinhold author:jcreinhold |
feat(Algebra/Category/Ring): preserve limits to CommMonCat |
Adds the missing instance saying that forgetting a commutative ring to its multiplicative commutative monoid preserves limits. |
t-algebra
new-contributor
label:t-algebra$ |
7/0 |
Mathlib/Algebra/Category/Ring/Limits.lean |
1 |
7 |
['felixpernegger', 'github-actions', 'jcreinhold'] |
nobody |
1 |
33-32451 1 month ago |
38-17523 38 days ago |
38-25462 38 days |
| 40775 |
felixpernegger author:felixpernegger |
feat(Data/Finset): `insert a (s.erase a) = insert a s` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
5/3 |
Mathlib/Data/Finset/Basic.lean,Mathlib/Data/Finset/Fold.lean,Mathlib/RingTheory/Lasker.lean |
3 |
3 |
['eric-wieser', 'felixpernegger', 'github-actions'] |
nobody |
none |
33-10715 1 month ago |
33-72732 33 days ago |
33-74375 33 days |
| 40759 |
CoolRmal author:CoolRmal |
feat(Order): a sequence converges if every subsequence has a further convergent subsequence |
This PR proves `tendsto_of_forall_filter_le_exists_tendsto`, which is the filter version of the theorem in the title: if for any filter `m ≤ l₁`, there exists a nontrivial filter `n ≤ m` such that `f` converges to `l₂` along `n`, then `f` converges to `l₂` along `l₁`.
Mostly generated in a chat with GPT Pro 5.5. Polished and reviewed by me.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
10/0 |
Mathlib/Order/Filter/Tendsto.lean |
1 |
4 |
['CoolRmal', 'attilavjda', 'github-actions'] |
nobody |
none |
32-44546 1 month ago |
32-46704 32 days ago |
33-75999 33 days |
| 39427 |
Hagb author:Hagb |
feat(Order/Interval/Finset/Defs): `LocallyFiniteOrder{Bot,Top}` implies `WellFounded{LT,GT}` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39547
[](https://gitpod.io/from-referrer/)
|
t-order |
11/0 |
Mathlib/Order/Interval/Finset/Defs.lean |
1 |
5 |
['Hagb', 'github-actions', 'leanprover-radar', 'mathlib-dependent-issues'] |
nobody |
none |
30-64821 1 month ago |
30-66544 30 days ago |
30-70036 30 days |
| 40876 |
vihdzp author:vihdzp |
chore: deprecate `StrictMono.not_bddAbove_range_of_wellFoundedLT` → `StrictMono.isCofinal_range` |
In a linear order without a maximum, the statements `¬ BddAbove s` and `IsCofinal s` are equivalent. The `IsCofinal` version of this theorem works even without the `NoMaxOrder` assumption, so it is strictly more general.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
18/1 |
Mathlib/Order/Cofinal.lean,Mathlib/Order/WellFounded.lean,Mathlib/SetTheory/Ordinal/Enum.lean |
3 |
5 |
['SnirBroshi', 'github-actions', 'vihdzp'] |
nobody |
none |
30-42186 1 month ago |
30-60211 30 days ago |
30-59874 30 days |
| 40584 |
CoolRmal author:CoolRmal |
chore(Order): add to_dual tags in Mathlib/Order/ConditionallyCompleteLattice/Indexed |
This PR adds `to_dual` tags in `Mathlib/Order/ConditionallyCompleteLattice/Indexed`. I also add `to_dual` tags to some lemmas in `Mathlib/Order/ConditionallyCompleteLattice/Basic` in order to make `to_dual` works in `Mathlib/Order/ConditionallyCompleteLattice/Indexed`.
Created with the help of codex. |
t-order |
61/188 |
Mathlib/Order/ConditionallyCompleteLattice/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Indexed.lean |
2 |
3 |
['SnirBroshi', 'github-actions'] |
nobody |
none |
30-19306 1 month ago |
30-22079 30 days ago |
38-38385 38 days |
| 40812 |
karlesmarin author:karlesmarin |
feat(RingTheory/HopfAlgebra): the antipode is the unique convolution … |
…inverse of the identity
Add `HopfAlgebra.eq_antipode_of_convMul_id` and `HopfAlgebra.eq_antipode_of_id_convMul`: any R-linear map that is a one-sided convolution inverse of the identity equals the antipode. The proof is `left_inv_eq_right_inv` in the convolution monoid `WithConv (A →ₗ[R] A)`, using the two antipode axioms. This resolves the "uniqueness of Hopf algebra structure on a bialgebra" TODO and is the companion (uniqueness) to the existing `ofConvInverse` constructor (existence).
**AI disclosure.** This contribution was written with AI assistance (Claude, used as a coding assistant). I have reviewed and understand the proof and can justify the design. The result — uniqueness of the antipode — is classical; the contribution is its Lean formalization.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
LLM-generated
|
21/3 |
Mathlib/RingTheory/HopfAlgebra/Basic.lean |
1 |
5 |
['github-actions', 'karlesmarin', 'themathqueen'] |
nobody |
none |
30-4552 1 month ago |
33-1910 33 days ago |
33-1375 33 days |
| 40910 |
riccardobrasca author:riccardobrasca |
feat: add comap_map_eq_of_unramified and related declarations |
From flt-regular.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
172/0 |
Mathlib/RingTheory/DedekindDomain/Different.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
29-63619 29 days ago |
29-64453 29 days ago |
29-63918 29 days |
| 36743 |
Jun2M author:Jun2M |
feat(Combinatorics/GraphLike): introduce `GraphLike` typeclass |
Edit: There is #40204: alternative PR that uses incidence to define hypergraph.
Per discussion at ([#graph theory > HasAdj](https://leanprover.zulipchat.com/#narrow/channel/252551-graph-theory/topic/HasAdj/with/575843445)), This PR introduces the `GraphLike` typeclass to capture the notions like `dart` and `walk` across various graph objects, such as `SimpleGraph`, `Graph`, and `Digraph`.
The goal is that by abstracting these core components into a typeclass, we can prove these results once for all graph-like structures rather than duplicating them across different graph types.
### Main definitions
* `GraphLike V D E Gr`: A typeclass parameterized by a vertex type `V`, dart type `D` and a graph type `Gr` (with `V`, `D` & `E` as an `outParam`).
* `GraphLike.verts : Set V`: The set of vertices of the graph.
* `GraphLike.darts : Set D`: The set of darts of the graph.
* `GraphLike.edges : Set E`: The set of edges of the graph.
* `GraphLike.Adj : V → V → Prop`: The adjacency relation, defined by default as `∃ d ∈ darts, fst d = u ∧ snd d = v`.
---
This PR generalises #35776 to also unify `Graph`.
PRs depending on this PR are
#39047 (graphLike with no multi edges) => #39050 (Digraph is graphLike)
||
V
#36829 (undirected graphLike) => #39053 (Graph is graphLike) & #39054 (Simplegraph is graphLike)
||
V
#36756 (def of walk on GraphLike) => #36971 (change Simplegraph to use GraphLike walk)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
104/0 |
Mathlib.lean,Mathlib/Combinatorics/GraphLike/Basic.lean |
2 |
78 |
['IvanRenison', 'Jun2M', 'SnirBroshi', 'YaelDillies', 'github-actions', 'lauramonk', 'mathlib-merge-conflicts'] |
nobody |
1 |
29-49711 29 days ago |
74-80514 74 days ago |
125-78395 125 days |
| 40387 |
tb65536 author:tb65536 |
feat(RingTheory/Invariant/Basic): inertia subgroup of a quotient group |
This PR proves that the inertia subgroup of a quotient group is the image of the inertia subgroup.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #40383
- [x] depends on: #40385
- [x] depends on: #40386
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
68/0 |
Mathlib/RingTheory/Invariant/Basic.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues', 'xroblot'] |
nobody |
1 |
28-81329 28 days ago |
28-86030 28 days ago |
29-3448 29 days |
| 40963 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Paths): add lemma about the first dart if dropLast is a path |
If `dropLast` of a walk is a path, a dart of the walk sharing its first vertex with the walk also shares its second vertex.
I thought this was a natural more general form of `IsPath.eq_snd_of_mem_edges`, useful for cycles for example.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
16/0 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Operations.lean |
2 |
2 |
['github-actions'] |
nobody |
none |
28-75255 28 days ago |
28-76109 28 days ago |
28-76236 28 days |
| 37232 |
mathlib-splicebot author:mathlib-splicebot |
chore(Algebra/Order): bound on `|n / m|ₘ` and `|n - m|` |
This PR was automatically created from PR #34722 by @GrigorenkoPV via a [review comment](https://github.com/leanprover-community/mathlib4/pull/34722#discussion_r2996870566) by @Vierkantor. |
t-algebra label:t-algebra$ |
5/0 |
Mathlib/Algebra/Order/Group/Unbundled/Abs.lean |
1 |
10 |
['Vierkantor', 'bryangingechen', 'github-actions', 'mathlib-bors'] |
nobody |
none |
28-35189 28 days ago |
28-35189 28 days ago |
28-35242 28 days |
| 40961 |
JovanGerb author:JovanGerb |
chore: remove imports added by `shake` |
This PR removes some imports that were added by `shake` in the past.
For some of these it's not clear to me why `shake` added them. In particular, I noticed some occurrences of `public import Mathlib.Tactic.NormNum.Pow`/`Inv`, where `norm_num` is not used in the file at all, which I found suspicious.
For `CompileInductive`, it is expected that `shake` keeps the import, because of `shake: keep-downstream`, so these imports need to be minimzed manually, which this PR does.
For good measure, I also fixed an issue in `Mathlib.Tactic.NormNum.Pow` that some non-meta things were marked as `meta`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
21/38 |
Mathlib/Algebra/ContinuedFractions/ConvergentsEquiv.lean,Mathlib/Algebra/Free.lean,Mathlib/Algebra/FreeMonoid/Basic.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/Algebra/Module/Submodule/Union.lean,Mathlib/Algebra/Opposites.lean,Mathlib/Algebra/Order/GroupWithZero/Basic.lean,Mathlib/Combinatorics/Enumerative/Stirling.lean,Mathlib/Combinatorics/Quiver/Path.lean,Mathlib/Combinatorics/SetFamily/AhlswedeZhang.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/ChainOfFn.lean,Mathlib/Data/List/Defs.lean,Mathlib/Data/List/Induction.lean,Mathlib/Data/List/InsertIdx.lean,Mathlib/Data/Multiset/Defs.lean,Mathlib/Data/Nat/Hyperoperation.lean,Mathlib/Data/Num/Prime.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Ordmap/Ordnode.lean,Mathlib/Data/Seq/Computation.lean,Mathlib/Data/WSeq/Basic.lean,Mathlib/Logic/Equiv/Prod.lean,Mathlib/RingTheory/Ideal/Lattice.lean,Mathlib/SetTheory/Lists.lean,Mathlib/Tactic/NormNum/Pow.lean |
27 |
1 |
['github-actions'] |
nobody |
none |
28-18349 28 days ago |
28-72941 28 days ago |
28-73057 28 days |
| 40975 |
bwangpj author:bwangpj |
feat(LinearAlgebra): complex structures on real vector spaces |
Define complex structures,i .e. an `ℝ`-linear endomorphism `J` of a real vector space `V` with `J * J = -1`. |
t-algebra label:t-algebra$ |
93/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Complex/Structure.lean |
2 |
4 |
['bwangpj', 'github-actions', 'grunweg', 'wwylele'] |
nobody |
none |
27-57831 27 days ago |
28-59580 28 days ago |
28-59045 28 days |
| 40899 |
mcdoll author:mcdoll |
feat(Data/FunLike): add `abbrev`s for pointwise multiplication |
We add `abbrev`s that provide easy access to instances that involve multiplication as a pointwise operation for `FunLike` classes. This is for example needed for `ZeroAtInftyContinuousMap`
Moreover, we
- move `NatCast` instance for `Pi` to new file `Data/Nat/Cast/Pi`
- rename `IsNatCastApply` to `IsNatCastApplyEqSMul` for the composition variant (same for `IntCast`)
- add `IsNatCast` for pointwise multiplication (same for `IntCast`)
- rename `abbrev` that apply to composition versions to `compSemiring` etc
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
337/68 |
Mathlib.lean,Mathlib/Algebra/Ring/Pi.lean,Mathlib/Data/FunLike/GroupWithZero.lean,Mathlib/Data/FunLike/IsApply.lean,Mathlib/Data/FunLike/Ring.lean,Mathlib/Data/Nat/Cast/Basic.lean,Mathlib/Data/Nat/Cast/Pi.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
8 |
3 |
['eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
27-37704 27 days ago |
27-40041 27 days ago |
29-5184 29 days |
| 40757 |
tb65536 author:tb65536 |
feat(RingTheory/Ideal/Pointwise): add `Ideal.inertia_smul` |
This PR adds `Ideal.inertia_smul` stating that inertia subgroups of conjugate ideals are conjugate.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
15/5 |
Mathlib/RingTheory/Ideal/Defs.lean,Mathlib/RingTheory/Ideal/Pointwise.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
27-21361 27 days ago |
27-23036 27 days ago |
33-66443 33 days |
| 41022 |
CoolRmal author:CoolRmal |
feat(Data/List): add TFAE lemmas for append and permutations |
This PR adds some `TFAE` lemmas in `Mathlib/Data/List/TFAE`: a sublist monotonicity lemma, an append criterion, and congruence under list permutations.
It also rewrites `tfae_cons_of_mem` as a specialization of the append lemma.
Created with the help of codex.
|
t-data |
28/10 |
Mathlib/Data/List/TFAE.lean |
1 |
3 |
['github-actions', 'themathqueen'] |
nobody |
none |
26-74753 26 days ago |
27-21120 27 days ago |
27-20681 27 days |
| 41051 |
tb65536 author:tb65536 |
feat(FieldTheory/PolynomialGaloisGroup): add equivariant bijection between root sets |
Currently the bijection `rootsEquivRoots` between root sets of a polynomial that splits is not equivariant with respect to the action of the Galois group. This PR demotes the existing `rootsEquivRoots` to an auxilliary def `rootsEquivRootsAux` and adds an equivariant `rootsEquivRoots` in its place.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-ring-theory
label:t-algebra$ |
32/18 |
Mathlib/FieldTheory/PolynomialGaloisGroup.lean |
1 |
2 |
['github-actions', 'tb65536'] |
nobody |
none |
26-60296 26 days ago |
26-66576 26 days ago |
26-66043 26 days |
| 41065 |
BryceT233 author:BryceT233 |
feat(Algebra/GroupWithZero/Associated): transfer `IsRelPrime` between associated elements |
This is a split of #41064 which adds lemmas transfering `IsRelPrime` property via associated elements.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
18/0 |
Mathlib/Algebra/GroupWithZero/Associated.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
26-22858 26 days ago |
26-25100 26 days ago |
26-24565 26 days |
| 41074 |
vlad902 author:vlad902 |
feat(RingTheory): a ring is nontrivial iff it has nontrivial Krull dimension |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
15/4 |
Mathlib/Data/ENat/Basic.lean,Mathlib/RingTheory/KrullDimension/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
26-8478 26 days ago |
26-10386 26 days ago |
26-9851 26 days |
| 41073 |
vlad902 author:vlad902 |
feat(RingTheory): characterizing lemma for rings of infinite Krull dimension |
Show that the Krull dimension of a ring R is infinite if and only if it has ideals of unbounded height.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
21/0 |
Mathlib/Data/ENat/Basic.lean,Mathlib/RingTheory/Ideal/Height.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
26-8342 26 days ago |
26-10636 26 days ago |
26-11029 26 days |
| 40967 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Paths): some lemmas about inducing walks |
Could also be done via `SimpleGraph.Walk.map_induce`, but I thought that doing it directly is not much worse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
|
48/0 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean,Mathlib/Data/List/Nodup.lean |
3 |
2 |
['github-actions'] |
nobody |
none |
25-34881 25 days ago |
28-71107 28 days ago |
28-70657 28 days |
| 41066 |
BryceT233 author:BryceT233 |
feat(RingTheory/Jacobson/Ideal): surjective `RingHom` and `IsLocalHom` |
This is a split of #41064 which shows that a surjective `RingHom` is a local homomorphism if and only if its kernel is contained in the jacobson radical of the ring.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
24/16 |
Mathlib/RingTheory/Henselian.lean,Mathlib/RingTheory/Jacobson/Ideal.lean |
2 |
2 |
['BryceT233', 'github-actions'] |
nobody |
none |
25-26784 25 days ago |
25-27725 25 days ago |
26-23483 26 days |
| 38841 |
SnirBroshi author:SnirBroshi |
feat(Mathlib/Order/SuccPred/Limit): more `WithTop` lemmas about `IsMin`/`CovBy`/`IsSuccLimit` |
---
Continues the work from #38244
We should probably also have such lemmas for `WithTopBot`/`WithBotTop`, but that's for another day
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
122/31 |
Mathlib/Order/Cover.lean,Mathlib/Order/SuccPred/Limit.lean,Mathlib/Order/WithBot.lean |
3 |
4 |
['SnirBroshi', 'github-actions', 'vihdzp'] |
nobody |
none |
25-2012 25 days ago |
49-69709 49 days ago |
81-20192 81 days |
| 39747 |
vihdzp author:vihdzp |
feat: intervals `Ici`/`Ioi` are cofinal/closed under directed suprema |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
67/11 |
Mathlib/Order/Cofinal.lean,Mathlib/Order/DirSupClosed.lean,Mathlib/Order/Interval/Set/Basic.lean,Mathlib/Order/UpperLower/Basic.lean,Mathlib/Topology/Order/ScottTopology.lean |
5 |
16 |
['YaelDillies', 'b-mehta', 'github-actions', 'vihdzp'] |
nobody |
none |
25-1769 25 days ago |
58-84710 58 days ago |
59-62145 59 days |
| 39783 |
SnirBroshi author:SnirBroshi |
feat(Order/Interval/Finset): `Set.ncard` lemmas for `LocallyFiniteOrder` |
Followup to #39414 which untagged `Fintype.card_I??` as `@[simp]`.
Adds `Cardinal.mk`/`Set.encard`/`Set.ncard` lemmas for the 8 interval sets `Set.I??` (= 24 lemmas),
that convert them to `Finset.card` over the corresponding `Finset.I??` from a `LocallyFiniteOrder` instance.
---
`simp`? I think it's a bit strange since the `LocallyFiniteOrder` instance could have crazy definitions for the finset intervals which aren't "simpler", though the instances we currently have are simple.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
115/0 |
Mathlib.lean,Mathlib/Order/Interval/Finset/Card.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
25-1699 25 days ago |
58-80608 58 days ago |
58-80372 58 days |
| 40561 |
iosephusferrum author:iosephusferrum |
feat(ModelTheory): quantifier elimination for first-order theories |
This PR introduces `HasQuantifierElimination` for first-order languages, along with some standard criteria to establish it for any language that satisfies them and prerequisite formalization `mathlib4` required on elementary extension pairs (`IsElementaryExtensionPair`) and < κ-generated substructures (`CardinalLTGenerated`). It also states and proves that the first-order theory DLO (dense linear order without endpoints) has quantifier elimination (`dlo_hasQuantifierElimination`), using the newly formalized quantifier elimination criteria.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Salih Erdem Koçak <saliherdemkd@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
---
[](https://gitpod.io/from-referrer/)
Please note that we have utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are directly "translated" from human-language source material (check the diff in `references.bib`) to Lean proofs using mentioned AI tools. However, all design/formalization decisions are made by us. |
new-contributor
LLM-generated
|
976/7 |
Mathlib.lean,Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/ElementaryExtensionPair.lean,Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/Order.lean,Mathlib/ModelTheory/PartialEquiv.lean,Mathlib/ModelTheory/QuantifierElimination.lean,Mathlib/ModelTheory/Semantics.lean,Mathlib/ModelTheory/Substructures.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean,docs/references.bib |
11 |
6 |
['erdkocak', 'felixpernegger', 'github-actions'] |
nobody |
none |
24-59009 24 days ago |
39-61619 39 days ago |
39-61370 39 days |
| 40950 |
bwangpj author:bwangpj |
feat(LinearAlgebra): add Yang-Baxter equation and braided vector spaces |
Define braided vector spaces and the Yang–Baxter equation. |
t-algebra label:t-algebra$ |
121/0 |
Mathlib.lean,Mathlib/LinearAlgebra/TensorProduct/YangBaxter.lean |
2 |
3 |
['github-actions', 'themathqueen'] |
nobody |
none |
24-49752 24 days ago |
29-3600 29 days ago |
29-3065 29 days |
| 41104 |
mbkybky author:mbkybky |
feat(Algebra/Module/Submodule/Pointwise): `u • N = N` if `u` is a unit |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
10/6 |
Mathlib/Algebra/Module/Submodule/Pointwise.lean |
1 |
2 |
['eric-wieser', 'github-actions'] |
nobody |
none |
24-40692 24 days ago |
25-2171 25 days ago |
25-1636 25 days |
| 41134 |
martinwintermath author:martinwintermath |
feat(Algebra/Order/Nonneg): add `Nonneg` for nonnegative subtype |
Currently the nonnegative subtype is denoted `{x : R // 0 ≤ x}` which has a tendency to be used inconsistently and does not print well. This PR introduces
```lean4
/- The subtype of nonnegative elements. -/
abbrev Nonneg (α : Type*) [Zero α] [LE α] := { x : α // 0 ≤ x }
```
and replaces `{x : R // 0 ≤ x}` by `Nonneg R` throughout mathlib.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
114/110 |
Mathlib/Algebra/Order/Archimedean/Basic.lean,Mathlib/Algebra/Order/Module/Defs.lean,Mathlib/Algebra/Order/Nonneg/Basic.lean,Mathlib/Algebra/Order/Nonneg/Field.lean,Mathlib/Algebra/Order/Nonneg/Floor.lean,Mathlib/Algebra/Order/Nonneg/Module.lean,Mathlib/Algebra/Order/Nonneg/Ring.lean,Mathlib/Analysis/Convex/Cone/Basic.lean,Mathlib/Analysis/Convex/Segment.lean,Mathlib/Data/NNReal/Defs.lean,Mathlib/Geometry/Convex/Cone/Dual.lean,Mathlib/Geometry/Convex/Cone/Pointed.lean,Mathlib/MeasureTheory/Function/SimpleFuncDenseLp.lean,Mathlib/MeasureTheory/Integral/SetToL1.lean,Mathlib/RingTheory/Finiteness/Basic.lean,Mathlib/Topology/Algebra/Field.lean,Mathlib/Topology/Algebra/Order/Module.lean |
17 |
3 |
['SnirBroshi', 'github-actions', 'martinwintermath'] |
nobody |
none |
23-55577 23 days ago |
23-57988 23 days ago |
23-59689 23 days |
| 41137 |
plp127 author:plp127 |
fix: include `[NPow F]` in `FunLike.monoidWithZero` |
Include a `NPow` assumption in `FunLike.monoidWithZero` and `FunLike.semiring` and `FunLike.ring` instead of using `npowRec`. See https://github.com/leanprover-community/mathlib4/pull/37779#discussion_r3399574849.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
18/8 |
Mathlib/Data/FunLike/Ring.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
23-42390 23 days ago |
23-43880 23 days ago |
23-43426 23 days |
| 40826 |
felixpernegger author:felixpernegger |
feat(ci): autolabel PRs with "Generated with Claude Code" |
When one tells Claude code to open a PR, it will usually end the description with "🤖 Generated with [Claude Code](https://claude.com/claude-code)" (Im sure almost everyone will have seen this at this point).
This PR adds an action that will autolabel PRs with that ending as "LLM-generated", which might save a bit of time.
[List of all such PRs to mathlib](https://github.com/leanprover-community/mathlib4/pulls?q=is%3Apr+%F0%9F%A4%96+Generated+with+Claude+Code+)
(Ironically enough, I made this PR with Codex...)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
CI
LLM-generated
|
44/0 |
.github/workflows/label_llm_generated.yml,docs/workflows.md |
2 |
6 |
['SnirBroshi', 'felixpernegger', 'github-actions', 'joneugster'] |
nobody |
none |
22-45601 22 days ago |
32-65157 32 days ago |
32-64967 32 days |
| 41188 |
Scarlett-le author:Scarlett-le |
feat(Geometry/Euclidean): obtuse and right angle criteria from inner product sign |
This PR adds criteria characterising when an unoriented angle is at least, or
strictly greater than, `π / 2`, in terms of the sign of an inner product or a
comparison of squared distances. They are the obtuse/right-angle counterparts of
the existing equality results `InnerProductGeometry.inner_eq_zero_iff_angle_eq_pi_div_two`
and the if-and-only-if Pythagorean theorem
`EuclideanGeometry.dist_sq_eq_dist_sq_add_dist_sq_iff_angle_eq_pi_div_two`.
### New lemmas
`Mathlib/Analysis/SpecialFunctions/Trigonometric/Inverse.lean`
- `Real.pi_div_two_le_arccos : π / 2 ≤ arccos x ↔ x ≤ 0`
- `Real.pi_div_two_lt_arccos : π / 2 < arccos x ↔ x < 0`
Duals of the existing `Real.arccos_le_pi_div_two` / `Real.arccos_lt_pi_div_two`,
both `@[simp]`.
`Mathlib/Geometry/Euclidean/Angle/Unoriented/Basic.lean`
- `InnerProductGeometry.inner_nonpos_iff_pi_div_two_le_angle`
- `InnerProductGeometry.inner_neg_iff_pi_div_two_lt_angle`
`Mathlib/Geometry/Euclidean/Angle/Unoriented/RightAngle.lean`
- `EuclideanGeometry.dist_sq_add_dist_sq_le_dist_sq_iff_pi_div_two_le_angle` |
|
41/0 |
Mathlib/Analysis/SpecialFunctions/Trigonometric/Inverse.lean,Mathlib/Geometry/Euclidean/Angle/Unoriented/Basic.lean,Mathlib/Geometry/Euclidean/Angle/Unoriented/RightAngle.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
22-16815 22 days ago |
22-18661 22 days ago |
22-18126 22 days |
| 41217 |
Probablism author:Probablism |
feat(SimpleGraph/Matching): add graph-level IsMatching |
Closes #11911.
This adds a graph-level `SimpleGraph.IsMatching` predicate. It is support-based, so isolated
vertices are allowed: every vertex in the graph support is incident to exactly one edge.
The existing `Subgraph.IsMatching` predicate is unchanged. I added compatibility lemmas relating it
to `M.spanningCoe`, including an iff characterizing the subgraph predicate as graph-level matching
plus `M.support = M.verts`.
Validation:
- `lake env lean Mathlib/Combinatorics/SimpleGraph/Matching.lean`
- `lake build Mathlib.Combinatorics.SimpleGraph.Matching`
- `lake build Mathlib.Combinatorics.SimpleGraph.Hall Mathlib.Combinatorics.SimpleGraph.Tutte Mathlib.Combinatorics.SimpleGraph.UniversalVerts`
- `lake exe lint-style Mathlib/Combinatorics/SimpleGraph/Matching.lean`
- `lake build Mathlib`
- `lake test`
AI assistance: OpenAI Codex assisted with testing and validation.
|
t-combinatorics
new-contributor
|
41/3 |
Mathlib/Combinatorics/SimpleGraph/Matching.lean |
1 |
4 |
['Probablism', 'SnirBroshi', 'github-actions'] |
nobody |
none |
21-52242 21 days ago |
21-53431 21 days ago |
21-52896 21 days |
| 38292 |
kim-em author:kim-em |
feat(AlgebraicTopology): universal cover construction |
This PR constructs the universal cover of a path-connected, locally path-connected, semilocally simply connected space `X` as the based-path space modulo endpoint-preserving homotopy, topologised by coinduction from the compact-open based-path space.
Split across five files:
* `Topology/Homotopy/TubeNeighborhood.lean` — class-free machinery: `IsPathHomotopyTrivial`, tube neighborhoods in path space, their openness in the compact-open topology, and the ladder-homotopy pasting argument showing any two paths in a common tube are homotopic.
* `AlgebraicTopology/FundamentalGroupoid/SemilocallySimplyConnected.lean` — `SemilocallySimplyConnectedAt/On/Space`, defined via the classical based condition (trivial `π₁(U, x) → π₁(X, x)`), with the unbased upgrade on locally path-connected spaces, and discreteness of `Path.Homotopic.Quotient`.
* `AlgebraicTopology/FundamentalGroupoid/BasedPath.lean` — the based-path space (with `FunLike`/`ContinuousEval` instances) and the path-component machinery of `endpoint ⁻¹' U`.
* `AlgebraicTopology/FundamentalGroupoid/UniversalCover/Basic.lean` — quotient topology, `proj`, and the sheet decomposition.
* `AlgebraicTopology/FundamentalGroupoid/UniversalCover/Covering.lean` and `Action.lean` — `isCoveringMap`, `pathConnectedSpace`, `simplyConnectedSpace`, the universal lifting property, and the free, properly discontinuous `π₁(X, x₀)`-action making `proj` a quotient covering map.
I want to note this takes a different approach than Hatcher et al, which build the universal cover as the path space, but with a "custom" topology. It is then a theorem (often not proved in textbooks) that with the usual hypotheses this topology coincides with the one coinduced from the compact-open topology. I decided that "the mathlib way" was just to start with the "natural" topology, and not take this shortcut.
🤖 Prepared with Claude Code and Codex.
|
|
2831/35 |
Mathlib.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/BasedPath.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/Basic.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/FundamentalGroup.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/SemilocallySimplyConnected.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/UniversalCover/Action.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/UniversalCover/Basic.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/UniversalCover/Covering.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/Homotopy/Path.lean,Mathlib/Topology/Homotopy/TubeNeighborhood.lean,Mathlib/Topology/Path.lean,Mathlib/Topology/Subpath.lean,Mathlib/Topology/UnitInterval.lean |
14 |
50 |
['github-actions', 'kim-em', 'mathlib-merge-conflicts'] |
nobody |
none |
21-42053 21 days ago |
21-43418 21 days ago |
21-42883 21 days |
| 41223 |
YaelDillies author:YaelDillies |
feat(LInearAlgebra): predicate version of `mem_span_iff_linearCombination` |
This is necessary after #39582.
From Toric
---
There are *many* more lemmas that will need to be similarly duplicated to accommodate #39582. I personally think it is more reasonable to revert #39582.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
toric
label:t-algebra$ |
4/0 |
Mathlib/LinearAlgebra/Finsupp/LinearCombination.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
21-31435 21 days ago |
21-33574 21 days ago |
21-33039 21 days |
| 40768 |
AlexeyMilovanov author:AlexeyMilovanov |
Add a reachability characterization for PFun.fix |
Add a `ReflTransGen` characterization of `PFun.fix` and use it to simplify one Turing machine proof. |
new-contributor |
27/13 |
Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Data/PFun.lean |
2 |
2 |
['github-actions'] |
nobody |
none |
21-7217 21 days ago |
21-7217 21 days ago |
21-6682 21 days |
| 35669 |
SnirBroshi author:SnirBroshi |
feat(Mathlib/Data/Finset/Mex): `sInf sᶜ ≤ s.encard` |
---
It's in a separate file because I couldn't find a sensible place with the required imports, not because "mex" is particularly interesting.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #35821
- [x] depends on: #35822
[](https://gitpod.io/from-referrer/)
|
t-order |
59/0 |
Mathlib.lean,Mathlib/Data/Finset/Mex.lean |
2 |
14 |
['SnirBroshi', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
none |
20-84171 20 days ago |
20-84717 20 days ago |
25-236 25 days |
| 38432 |
SnirBroshi author:SnirBroshi |
feat(Logic/Relation): `Map r f g ≤ s ↔ r ≤ s.bicompl f g` |
and the dual `s ≤ Relation.Map r f g ↔ s.bicompl f g ≤ r` which requires `f` and `g` to be bijective.
Adds `Galois{Connection/Insertion/Coinsertion}` for the dual.
The theorems are specialized to `onFun` instead of `bicompl` for when `f = g`.
A `GaloisConnection` for the iff in the title requires `f`/`g` to be bijective, but then we can get an `OrderIso` which is stronger (see #38499).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
126/28 |
Mathlib/Logic/Relation.lean,Mathlib/Order/GaloisConnection/Basic.lean |
2 |
5 |
['SnirBroshi', 'github-actions', 'plp127'] |
nobody |
none |
20-81257 20 days ago |
20-84299 20 days ago |
89-15014 89 days |
| 36698 |
ghseeli author:ghseeli |
feat(Combinatorics/Enumerative): Latin squares |
This PR defines Latin rectangles and Latin squares and proves an extension theorem using Hall's Marriage Theorem.
## Main results
- `group_to_cayley_table`: every finite group `G` yields a `LatinSquare G G`.
- `latin_rectangle_extends_one_row`: a (non-square) `LatinRectangle` extends to a `LatinRectangle`
with one more row. This is an application of **Hall's Marriage Theorem**, `hallMatchingsOn.nonempty`.
- `latin_rectangle_extends_to_latin_square`: a `LatinRectangle` extends to a `LatinSquare`.
This is included in a new file `Combinatorics/Enumerative/LatinSquare.lean`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37190
- [x] depends on: #37720
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
|
646/0 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/DoubleCounting.lean,Mathlib/Combinatorics/Enumerative/LatinSquare.lean,Mathlib/Combinatorics/Pigeonhole.lean,Mathlib/Data/Finset/Card.lean,Mathlib/Data/Fintype/Card.lean,docs/references.bib |
7 |
81 |
['SnirBroshi', 'cjrl', 'eric-wieser', 'ghseeli', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vlad902'] |
nobody |
none |
20-51205 20 days ago |
20-53799 20 days ago |
37-64800 37 days |
| 31892 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Sphere/PolePolar): poles and polars |
Define poles and polars for spheres in Euclidean affine spaces, and set up some basic API, including in particular La Hire's theorem (`p₁` lies on the polar of `p₂` if and only if `p₂` lies on the polar of `p₁`).
Poles and polars are actually meaningful for any quadric in a projective space over any field, but I think it's reasonable to set up this theory for spheres in the Euclidean context and potentially link it in future to more general projective geometry.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #31891
- [x] depends on: #32296
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
158/0 |
Mathlib.lean,Mathlib/Geometry/Euclidean/Sphere/PolePolar.lean |
2 |
10 |
['Parcly-Taxel', 'github-actions', 'jsm28', 'kim-em', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
2 |
20-46722 20 days ago |
20-47531 20 days ago |
116-73758 116 days |
| 41259 |
felixpernegger author:felixpernegger |
chore: remove redudant `nonrec`'s |
Remove all `nonrec` which are just not needed, about 9% of all `nonrec` occurences (tech debt)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
62/62 |
Mathlib/Algebra/Colimit/DirectLimit.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/AlgebraicGeometry/Cover/MorphismProperty.lean,Mathlib/AlgebraicGeometry/Morphisms/ClosedImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Descent.lean,Mathlib/AlgebraicGeometry/Morphisms/QuasiFinite.lean,Mathlib/AlgebraicGeometry/Sites/SheafQuasiCompact.lean,Mathlib/Analysis/Calculus/Deriv/Comp.lean,Mathlib/Analysis/Calculus/Deriv/Star.lean,Mathlib/Analysis/Calculus/FDeriv/Basic.lean,Mathlib/Analysis/Calculus/FDeriv/WithLp.lean,Mathlib/Analysis/Complex/PhragmenLindelof.lean,Mathlib/Analysis/Complex/Trigonometric.lean,Mathlib/Analysis/Normed/Group/Quotient.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Computability/RecursiveIn.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Cycle.lean,Mathlib/Data/NNReal/Defs.lean,Mathlib/Data/Rel/Cover.lean,Mathlib/Data/Rel/Separated.lean,Mathlib/Geometry/Euclidean/Inversion/Calculus.lean,Mathlib/Geometry/Manifold/ContMDiff/Constructions.lean,Mathlib/Geometry/Manifold/ContMDiff/NormedSpace.lean,Mathlib/LinearAlgebra/Multilinear/Basic.lean,Mathlib/MeasureTheory/Group/Arithmetic.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/Basic.lean,Mathlib/MeasureTheory/Measure/Decomposition/Lebesgue.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/ModelTheory/Ultraproducts.lean,Mathlib/NumberTheory/BernoulliPolynomials.lean,Mathlib/Probability/Density.lean,Mathlib/Probability/Moments/Variance.lean,Mathlib/RingTheory/Flat/Basic.lean,Mathlib/RingTheory/Ideal/KrullsHeightTheorem.lean,Mathlib/RingTheory/Polynomial/Resultant/Basic.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/FiberBundle/Basic.lean,Mathlib/Topology/Filter.lean,Mathlib/Topology/Homotopy/Basic.lean,Mathlib/Topology/Instances/ENat.lean,Mathlib/Topology/MetricSpace/MetricSeparated.lean,Mathlib/Topology/MetricSpace/Pseudo/Basic.lean,Mathlib/Topology/Order/LocalExtr.lean |
44 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
none |
20-46472 20 days ago |
20-53576 20 days ago |
20-53041 20 days |
| 40193 |
BoltonBailey author:BoltonBailey |
chore(1000.yaml): add entries |
This PR adds data on a number of previously missing entries to 1000.yaml that were found during the course of Project Numina's preparation of LeanTriathlon.
These include:
- `comment`s with references to formalized statements of theorems (mostly from the formal-conjectures repo) in cases where they exist, (it seems that, while we can add unproven statements and statements from other repos, we can't really include unproven statements from other repos using the system as it currently exists)
- `comment`s about related definitions to certain theorems in mathlib.
- `url` references to a few complete formalizations in a variety of other repositories.
- `decl` for the preexisting `prime_ideal_of_disjoint_filter_ideal` theorem in Mathlib, which as far as I can tell is just a more general version of the Boolean Prime Ideal theorem.
AI was used in large scale scans to identify these missing entries, but I have done my best to check manually that the statements are correct.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
17/2 |
docs/1000.yaml |
1 |
9 |
['BoltonBailey', 'github-actions', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
none |
20-43467 20 days ago |
20-43968 20 days ago |
47-55936 47 days |
| 41273 |
SnirBroshi author:SnirBroshi |
feat(Order/ConditionallyCompleteLattice): antitone versions of `sSup (f '' s)` lemmas |
`f (sInf s) = sSup (f '' s)` and `f (sSup s) = sInf (f '' s)` for an antitone function and a finite nonempty set.
Matches the existing monotone lemmas.
---
Followup to #35822
I think the `Basic.lean` lemmas don't hold for `{Mono/Anti}toneOn f s`, but the `Finset.lean` lemmas should, though I haven't done that yet.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
39/19 |
Mathlib/Order/ConditionallyCompleteLattice/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Finset.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
20-39640 20 days ago |
20-42261 20 days ago |
20-41726 20 days |
| 41288 |
lua-vr author:lua-vr |
feat(EReal): add_eq_top_iff_eq_top_* |
Adds `add_eq_top_iff_eq_top_{left,right}` and replaces the proofs of the `ne` versions with `.ne`. `add_ne_top_iff_of_ne_bot_of_ne_top` was duplicated, so I deprecated it.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
11/6 |
Mathlib/Data/EReal/Operations.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
20-10163 20 days ago |
20-11558 20 days ago |
20-11023 20 days |
| 41297 |
plp127 author:plp127 |
feat: cardinality of `Ultrafilter` |
We prove there are `2 ^ 2 ^ #α` ultrafilters on an infinite type `α`. For completeness, we also provide the cardinality lemma when `α` is finite.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
t-set-theory
|
142/0 |
Mathlib.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/Ultrafilter/Basic.lean,Mathlib/Order/Filter/Ultrafilter/Cardinality.lean |
4 |
1 |
['github-actions'] |
nobody |
none |
19-68673 19 days ago |
20-3331 20 days ago |
20-2796 20 days |
| 41241 |
intgrah author:intgrah |
feat(Order/Category): cartesian closed and distributive structure on PartOrd and Preord |
Give `PartOrd` and `Preord` `CartesianMonoidalCategory`, `MonoidalClosed`, and `IsCartesianDistributive` instances.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
|
272/0 |
Mathlib.lean,Mathlib/Order/Category/PartOrd/CartesianClosed.lean,Mathlib/Order/Category/PartOrd/Distributive.lean,Mathlib/Order/Category/Preord/CartesianClosed.lean,Mathlib/Order/Category/Preord/Distributive.lean |
5 |
5 |
['github-actions', 'intgrah'] |
nobody |
none |
19-67040 19 days ago |
21-5218 21 days ago |
21-4683 21 days |
| 41264 |
alreadydone author:alreadydone |
feat(EllipticCurve/Affine/Point): easy instances |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
t-algebra
easy
label:t-algebra$ |
14/0 |
Mathlib/Algebra/Group/Action/Faithful.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Point.lean |
2 |
5 |
['alreadydone', 'github-actions', 'kbuzzard', 'leanprover-radar', 'plp127'] |
nobody |
none |
19-65766 19 days ago |
20-48796 20 days ago |
20-48261 20 days |
| 38587 |
dagurtomas author:dagurtomas |
feat(Tactic/CategoryTheory): concrete category boilerplate |
Adds `mk_concrete_category`, a command for generating the initial boilerplate for concrete categories whose morphisms are given by a bundled function type.
The command creates the wrapper `Hom` type, named category and concrete category instances, `ofHom`, `Hom.hom`, and the basic dsimp lemmas.
It handles parameterized categories such as `ModuleCat`, and has a paired additive/multiplicative form for generating both structures at once (e.g. `MonCat`/`AddMonCat`).
Includes test categories checking the generated declarations.
[](https://gitpod.io/from-referrer/)
|
LLM-generated
t-meta
t-category-theory
|
905/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/CategoryTheory/MkConcreteCategory.lean,MathlibTest/CategoryTheory/MkConcreteCategory.lean |
4 |
8 |
['dagurtomas', 'eric-wieser', 'github-actions'] |
nobody |
none |
19-49664 19 days ago |
76-39258 76 days ago |
76-39484 76 days |
| 40665 |
Yu-Misaka author:Yu-Misaka |
feat(RepresentationTheory): the character values of a finite group are algebraic integers |
Zulip link: [#Is there code for X? > Integrality of character](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Integrality.20of.20character/with/603655189)
The proof comes from Seed Prover (lean-eval) and was golfed by me.
Co-authored-by: @GanjinZero
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41242
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
16/3 |
Mathlib/RepresentationTheory/Character.lean |
1 |
14 |
['Yu-Misaka', 'bwangpj', 'copilot-pull-request-reviewer', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'tb65536', 'yuanyi-350'] |
nobody |
none |
19-44518 19 days ago |
19-45632 19 days ago |
35-65091 35 days |
| 34799 |
vlad902 author:vlad902 |
feat(SimpleGraph): the cycle graph and complete graph are Hamiltonian |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #34797
- [ ] depends on: #35255
- [ ] depends on: #37930
[](https://gitpod.io/from-referrer/) |
t-combinatorics
large-import
|
22/0 |
Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean |
1 |
6 |
['SnirBroshi', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vlad902'] |
nobody |
none |
19-24221 19 days ago |
20-68450 20 days ago |
20-68466 20 days |
| 32282 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Angle/Incenter): unoriented angle bisection |
Add lemmas giving unoriented angles involving the incenter and excenters of a triangle as expressions involving dividing angles of the triangle by 2, deduced from oriented bisection lemmas.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #30981
- [ ] depends on: #30982
- [ ] depends on: #31205
- [ ] depends on: #32019
- [ ] depends on: #32021
- [ ] depends on: #32259
- [ ] depends on: #32260
- [ ] depends on: #32270
- [ ] depends on: #32273
- [ ] depends on: #32278
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
92/0 |
Mathlib/Geometry/Euclidean/Angle/Incenter.lean |
1 |
19 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'wwylele'] |
nobody |
1 |
19-15407 19 days ago |
19-15699 19 days ago |
116-68740 116 days |
| 41317 |
Raph-DG author:Raph-DG |
chore(Function): ext lemma checking points in the support |
In this PR, we add in a variant of ext_iff_mulSupport which checks two functions are equal by checking they are equal at all points of the union of their supports. This was originally part of #38472, but having this lemma modify such a low level file was making it difficult to work on that PR
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
9/0 |
Mathlib/Algebra/Notation/Support.lean |
1 |
2 |
['github-actions'] |
nobody |
none |
19-14690 19 days ago |
19-17406 19 days ago |
19-16871 19 days |
| 41327 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Subgraph): `induce` lemmas |
`Subgraph.induce` API for sup / inf / iSup / iInf / inter / iUnion / iInter (union already exists)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
58/0 |
Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
18-83315 18 days ago |
18-84679 18 days ago |
18-84144 18 days |
| 41305 |
martinwintermath author:martinwintermath |
feat(Geometry/Convex/ConvexSpace): consistency adjustments for convexity on module and affine space |
This PR makes a few consistency adjustments to improve the use of `ConvexSpace` with modules and affine spaces.
- make `IsModuleConvexSpace.ofModule` into an instance
- deprecate `isModuleConvexSpace_self` since now derived from `IsModuleConvexSpace.ofModule`
- rename `ConvexSpace.ofAddTorsor := AddTorsor.toConvexSpace`
- add class `IsAffineConvexSpace` and instance `IsAffineConvexSpace.ofAddTorsor`
- add instance deriving `IsAffineConvexSpace R V V` from `IsModuleConvexSpace R V`
With this PR, to use the standard convexity on an affine space we do no longer need the (usually too agressiv)
```lean4
attribute [local instance] AddTorsor.toConvexSpace
```
but the more general
```lean4
variable [ConvexSpace R P] [IsAffineConvexSpace R V P]
```
which now works analogously to convexity on modules. See the fixed instance `IsConvexDist` for metric spaces.
Zulip: [#PR reviews > Convexity refactor](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/Convexity.20refactor/with/607934406)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry |
49/16 |
Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Geometry/Convex/ConvexSpace/AffineSpace.lean,Mathlib/Geometry/Convex/ConvexSpace/Module.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
18-78634 18 days ago |
19-57445 19 days ago |
19-61314 19 days |
| 41336 |
SnirBroshi author:SnirBroshi |
chore(Combinatorics/SimpleGraph/Girth): golf `egirth_top` using `cycleGraph` |
Golf `egirth_top` (#38529) using `cycleGraph_isContained_iff` (#35255)
Co-authored-by: Vlad Tsyrklevich <vlad@tsyrklevi.ch>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
6/11 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
18-51242 18 days ago |
18-51762 18 days ago |
18-51227 18 days |
| 41337 |
gotrevor author:gotrevor |
doc(1000-yaml): add Goodstein's theorem and the Kirby–Paris theorem |
Claims two listed-but-unclaimed entries in the 1000+ theorems scoreboard by adding external-formalization pointers (no mathlib declaration; same pattern as Löb's theorem [`Q204884`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L201), the flypitch continuum-hypothesis independence [`Q208416`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L216), and Arrow's impossibility theorem [`Q33481`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L30)).
## Entries
| Wikidata | Theorem | Formalization |
|----------|---------|---------------|
| `Q1149185` | **Goodstein's theorem** — every Goodstein sequence terminates | [`lean-gallery`](https://github.com/gotrevor/lean-gallery/blob/main/LeanGallery/Logic/Goodstein/Statement.lean) (ordinal-descent proof) |
| `Q1149185X` | **Kirby–Paris theorem** — PA does not prove that every Goodstein sequence terminates | [`goodstein-independence`](https://github.com/gotrevor/goodstein-independence/blob/main/src/GoodsteinPA/Statement.lean) |
## Notes
- **`Q1149185X` (Kirby–Paris, 1982)** is built on the [`FormalizedFormalLogic/Foundation`](https://github.com/FormalizedFormalLogic/Foundation) library (the same library that backs the existing Löb's-theorem entry [`Q204884`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L201)), via the Wainer growth-rate route (`Goodstein` outgrows every PA-provably-total function). The headline `peano_not_proves_goodstein` is sorry-free and `#print axioms`-clean — it rests on exactly `[propext, Classical.choice, Quot.sound]`.
- **`Q1149185`** is Goodstein's theorem proper (the termination statement, provable in ZFC / Lean); mathlib does not currently contain it.
- Both formalizations are by Trevor Morris, developed with AI assistance: Claude Code (Fable 5, Opus), Codex, and Harmonic's Aristotle.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
new-contributor
LLM-generated
|
6/0 |
docs/1000.yaml |
1 |
4 |
['felixpernegger', 'github-actions'] |
nobody |
none |
18-47929 18 days ago |
18-50184 18 days ago |
18-49649 18 days |
| 40953 |
ymonbru author:ymonbru |
feat: the definition of a KSheaf on a T2 Space |
This files adds the definition of a KSheaf on a T2 space with value in an arbitrary category.
One may expect this notion to come from sheaves on a site of compact subset of a topological space but there is no coresponding Grothendieck topology on compact subsets. In particular, this is because one of the axioms is in the form of a colimit and can't be expressed as a limit condition (hence a sheaf condition).
It also adds API that allow to use the axioms in a convenient way.
---
- [ ] depends on: #40737
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
133/0 |
Mathlib.lean,Mathlib/Topology/Sheaves/KSheaf.lean |
2 |
9 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'ymonbru'] |
nobody |
none |
18-24428 18 days ago |
18-24428 18 days ago |
18-34628 18 days |
| 41358 |
erdkocak author:erdkocak |
doc(ModelTheory): fix partial equivalence theorem reference |
Fix a stale module doc reference in `ModelTheory.PartialEquiv`: the theorem is `equiv_between_cg`, and the conclusion is an isomorphism `M ≃[L] N`.
---
This documentation-only PR was split out from #41111 following review feedback.
Please note that ChatGPT Codex was used to help prepare this documentation-only PR. |
t-logic
new-contributor
|
3/3 |
Mathlib/ModelTheory/PartialEquiv.lean |
1 |
2 |
['github-actions'] |
nobody |
none |
18-19497 18 days ago |
18-20086 18 days ago |
18-19551 18 days |
| 41111 |
erdkocak author:erdkocak |
feat(ModelTheory): add cardinal-generated substructure API |
This is the first PR in a sequence splitting #40561.
It adds a `CardinalLTGenerated` predicate for substructures, basic closure and map lemmas, and the finitely generated specialization.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Yusuf Demir <yusufdemir12610@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
Please note that we utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are direct translations from human-language source material (see the diff in `references.bib`) into Lean proofs using the mentioned AI tools. However, all design and formalization decisions were made by us. |
t-logic
new-contributor
LLM-generated
|
51/0 |
Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/Substructures.lean |
2 |
9 |
['NoahW314', 'erdkocak', 'felixpernegger', 'github-actions'] |
nobody |
none |
18-18642 18 days ago |
18-19449 18 days ago |
24-16603 24 days |
| 40925 |
JovanGerb author:JovanGerb |
chore(CategoryTheory/Functor/Category): don't expose `NatTrans.hcomp` |
This PR hides the definition of `NatTrans.hcomp`, because it has two equally sensible possible definitions. As a result, we can get rid of the `to_dual_insert_cast`. `simps` doesn't work for non-exposed definition, so `hcomp_app` is proved separately, and its dual `hcomp_app'` is added.
Note: some proofs break, because the `dsimp` set changes, due to the definition not being exposed. This is a bit unfortunate. There was some discussion on Zulip about changing `dsimp` for category theory into a simp set, which would fix this problem, because we could then add `hcomp_app` to this set.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
maintainer-merge
tech debt
|
30/15 |
Mathlib/AlgebraicTopology/DoldKan/NCompGamma.lean,Mathlib/AlgebraicTopology/DoldKan/PInfty.lean,Mathlib/CategoryTheory/Functor/Category.lean,Mathlib/CategoryTheory/Monoidal/Action/End.lean,Mathlib/CategoryTheory/Monoidal/End.lean,Mathlib/CategoryTheory/Triangulated/TStructure/SpectralObject.lean,Mathlib/CategoryTheory/Types/Basic.lean |
7 |
11 |
['JovanGerb', 'github-actions', 'grunweg', 'leanprover-radar', 'riccardobrasca'] |
nobody |
none |
18-7516 18 days ago |
29-5413 29 days ago |
29-5685 29 days |
| 41100 |
tb65536 author:tb65536 |
refactor(RingTheory/Localization/AtPrime/Basic): replace `IsLiesOverAlgebra` with `IsScalarTower` |
As @erdOne pointed out on #38465, the recently added `IsLiesOverAlgebra` is equivalent to assuming `IsScalarTower`. So I've deprecated `IsLiesOverAlgebra` and switched everything over to `IsScalarTower`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
71/57 |
Mathlib/RingTheory/Flat/Localization.lean,Mathlib/RingTheory/LocalRing/ResidueField/Fiber.lean,Mathlib/RingTheory/LocalRing/ResidueField/Ideal.lean,Mathlib/RingTheory/LocalRing/ResidueField/Instances.lean,Mathlib/RingTheory/LocalRing/ResidueField/Polynomial.lean,Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/QuasiFinite/Basic.lean,Mathlib/RingTheory/QuasiFinite/Weakly.lean,Mathlib/RingTheory/RamificationInertia/Inertia.lean,Mathlib/RingTheory/RamificationInertia/Ramification.lean,Mathlib/RingTheory/Unramified/LocalRing.lean,Mathlib/RingTheory/Unramified/LocalStructure.lean,Mathlib/RingTheory/Unramified/Locus.lean |
13 |
8 |
['chrisflav', 'github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
none |
17-81411 17 days ago |
17-82334 17 days ago |
25-1922 25 days |
| 41364 |
SnirBroshi author:SnirBroshi |
chore(SimpleGraph/Clique): tidy `CliqueFree` iff lemmas |
Add `G.CliqueFree n ↔ (completeGraph (Fin n)).Free G` and rename two other iff theorems to fit better.
Since `Free` is not infix it should come before `top` when naming, `cliqueFree_iff` should mention its RHS since it isn't obvious, and `Fintype.card` should be mentioned.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
18/8 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Extremal/Turan.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
17-56407 17 days ago |
17-80998 17 days ago |
17-80463 17 days |
| 41373 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph): some `CliqueFree`/`Free` lemmas |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
29/0 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Copy.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
17-56170 17 days ago |
17-56748 17 days ago |
17-56213 17 days |
| 41369 |
tb65536 author:tb65536 |
feat(RingTheory/Localization/Ideal): generalize `IsLocalization.isMaximal_of_isMaximal_disjoint` |
This PR generalizes the existing `IsLocalization.isMaximal_of_isMaximal_disjoint` in `RingTheory/Jacobson/Ring` to arbitrary localizations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
21/18 |
Mathlib/RingTheory/Jacobson/Ring.lean,Mathlib/RingTheory/KrullDimension/Polynomial.lean,Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/Localization/Ideal.lean |
4 |
1 |
['github-actions'] |
nobody |
none |
17-53917 17 days ago |
17-53964 17 days ago |
17-53430 17 days |
| 41378 |
tb65536 author:tb65536 |
chore(RingTheory/QuasiFinite/Basic): extract instance from ramification proof |
This PR extracts an instance from the proof of `Ideal.ramificationIdx_pos`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
13/7 |
Mathlib/RingTheory/QuasiFinite/Basic.lean,Mathlib/RingTheory/RamificationInertia/Ramification.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
17-47889 17 days ago |
17-47934 17 days ago |
17-47400 17 days |
| 39864 |
8e7 author:8e7 |
feat(Combinatorics/SimpleGraph/Acyclic): helly property on subtrees |
This PR adds several lemmas regarding connected subsets of vertices in trees (subtrees). The main result is the Helly property for subtrees: For a finite set of subtrees, if any pair of subtrees intersect, then there is a common vertex in all subtrees.
This lemma is part of an effort to formalize tree decompositions (see #38334), and will be used in a future PR to prove `G.cliqueNum - 1 <= G.treeWidth`.
AI Usage: The proofs were developed with the help of Claude Code. I vouch for all the code written and understand the content fully.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
|
114/0 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean |
2 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
17-39663 17 days ago |
17-40218 17 days ago |
35-53856 35 days |
| 41379 |
tb65536 author:tb65536 |
chore(RingTheory/*): remove domain assumptions by generalizing from torsion free to faithful smul |
This PR removes some `IsDomain` assumptions by generalizing `Module.IsTorsionFree` to `FaithfulSMul`.
(As @SnirBroshi pointed out in the comments, this is not quite a generalization when the top ring is the zero ring, but this never arises in practice).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
7/7 |
Mathlib/RingTheory/Conductor.lean,Mathlib/RingTheory/Ideal/Maps.lean,Mathlib/RingTheory/Ideal/Over.lean |
3 |
3 |
['SnirBroshi', 'github-actions', 'tb65536'] |
nobody |
none |
17-25935 17 days ago |
17-45508 17 days ago |
17-44974 17 days |
| 41383 |
joelriou author:joelriou |
feat(Algebra/Category/ModuleCat): the category of sheaves of modules is Grothendieck abelian |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
128/5 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Generator.lean,Mathlib/AlgebraicGeometry/Modules/Sheaf.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/CategoryTheory/Abelian/GrothendieckAxioms/PresheafOfModules.lean,Mathlib/CategoryTheory/Abelian/GrothendieckAxioms/SheafOfModules.lean,Mathlib/CategoryTheory/Generator/Basic.lean |
7 |
1 |
['github-actions'] |
nobody |
none |
16-84207 16 days ago |
17-361 16 days ago |
17-497 17 days |
| 41388 |
emlis42 author:emlis42 |
feat(Data/Set): add mono of right inv |
This PR adds some theorems about monotonicity of right inverse of some map.
This is mainly for discoverability and includes a strict version of `monotoneOn_of_rightInvOn_of_mapsTo` i.e `strictMonoOn_of_rightInvOn_of_mapsTo`.
Discussed here: [Lemmas about `StrictMono`/`Monotone` maps with right inverse](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Lemmas.20about.20.60StrictMono.60.2F.60Monotone.60.20maps.20with.20right.20inverse) |
t-data |
36/3 |
Mathlib/Data/Set/Monotone.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
16-72472 16 days ago |
16-74997 16 days ago |
16-74462 16 days |
| 41300 |
alreadydone author:alreadydone |
feat(EllipticCurve): the universal elliptic curve |
+ Define the universal Weierstrass curve (`Universal.curve`) over the polynomial ring `ℤ[A₁,A₂,A₃,A₄,A₆]`, and the universal pointed elliptic curve (`Universal.pointedCurve`) over the field of fractions (`Universal.Field`) of the universal ring `ℤ[A₁,A₂,A₃,A₄,A₆,X,Y]/⟨P⟩ = Universal.Poly/⟨P⟩` (`Universal.Ring`, where `P` is the Weierstrass polynomial) with distinguished point `(X,Y)`.
+ Given a Weierstrass curve `W` over a commutative ring `R`, we define the specialization homomorphism `W.specialize : ℤ[A₁,A₂,A₃,A₄,A₆] →+* R`. If `(x,y)` is a point on the affine plane, we define `W.polyEval x y : Universal.Poly →+* R`, which factors through `W.ringEval x y : Universal.Ring →+* R` if `(x,y)` is on `W`.
migrated from #13847
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
t-algebra
label:t-algebra$ |
213/0 |
Mathlib.lean,Mathlib/Algebra/Group/Action/Faithful.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Point.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Universal.lean |
4 |
9 |
['Multramate', 'alreadydone', 'github-actions'] |
nobody |
none |
16-3630 16 days ago |
19-70969 19 days ago |
19-80029 19 days |
| 38957 |
wwylele author:wwylele |
chore(GroupTheory/DivisibleHull): remove `backward.privateInPublic` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-group-theory
|
5/12 |
Mathlib/GroupTheory/DivisibleHull.lean |
1 |
13 |
['Komyyy', 'github-actions', 'grunweg', 'jcommelin', 'wwylele'] |
nobody |
none |
16-2653 16 days ago |
57-48553 57 days ago |
71-39968 71 days |
| 40728 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Hasse): more properties of Hasse graphs of linear orders |
- two forms of an intermediate value theorem for linear orders
- the Hasse graph of a linear order is acyclic
- a path graph is locally finite
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
large-import
|
97/24 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/CycleGraph.lean,Mathlib/Combinatorics/SimpleGraph/Hasse.lean,Mathlib/Data/Fintype/Defs.lean |
4 |
18 |
['Formalistic03', 'SnirBroshi', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
15-68463 15 days ago |
15-71585 15 days ago |
29-51014 29 days |
| 37683 |
SabrinaJewson author:SabrinaJewson |
feat(Order/OrdContinuous): every map between complete lattices that preserves sSup is a left adjoint of some Galois connection |
It is already proven that the left side of a Galois connection is left-continuous; this provides the converse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #37682
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
|
14/0 |
Mathlib/Order/OrdContinuous.lean |
1 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
none |
15-64675 15 days ago |
15-66342 15 days ago |
15-67254 15 days |
| 41428 |
chrisflav author:chrisflav |
feat(Algebra/Category/ModuleCat): submodules of sheaves of modules |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
LLM-generated
|
148/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Submodule.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Submodule.lean,Mathlib/CategoryTheory/Sites/Whiskering.lean |
4 |
2 |
['chrisflav', 'github-actions'] |
nobody |
none |
15-60675 15 days ago |
15-61402 15 days ago |
15-60905 15 days |
| 41393 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Hamiltonian): a graph is Hamiltonian iff there's a Hamiltonian path with adjacent endpoints |
---
The new public import is needed because `Nat.card` was previously only imported privately.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
38/1 |
Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
15-25618 15 days ago |
16-53111 16 days ago |
16-52576 16 days |
| 41198 |
Raph-DG author:Raph-DG |
feat(AlgebraicGeometry): degree of a zero-cycle |
In this PR, we define the degree of a zero-cycle as in https://stacks.math.columbia.edu/tag/0AZ0
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
large-import
|
107/2 |
Mathlib/AlgebraicGeometry/AlgebraicCycle/Basic.lean,Mathlib/AlgebraicGeometry/ResidueField.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
13 |
['Raph-DG', 'github-actions', 'joelriou'] |
nobody |
none |
15-23659 15 days ago |
15-24262 15 days ago |
18-8008 18 days |
| 41208 |
tb65536 author:tb65536 |
chore(FieldTheory/Galois/IsGaloisGroup): remove FaithfulSMul assumptions |
A few results in IsGaloisGroup.lean are proved by passing to fraction fields which requires assuming FaithfulSMul. This PR removes the FaithfulSMul assumption by first passing to the image subring.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
28/29 |
Mathlib/FieldTheory/Galois/IsGaloisGroup.lean,Mathlib/NumberTheory/RamificationInertia/Galois.lean,Mathlib/RingTheory/IsGaloisGroup/Basic.lean |
3 |
1 |
['Whysoserioushah', 'github-actions'] |
nobody |
1 |
15-15744 15 days ago |
21-65914 21 days ago |
21-65380 21 days |
| 41401 |
vlad902 author:vlad902 |
feat(RingTheory): `Ideal.span` corollaries of Krull's height theorem |
Currently we have statements bounding the height of minimal primes of `Ideal.span s`. Add the obvious corollaries to bound the height of `Ideal.span s` directly.
Also add a `Set.encard`-valued statement of Krulls' height theorem for `Ideal.span`s. In a Noetherian ring we know the bound should always be finite, but this is useful in downstream applications that are using ENats.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
26/1 |
Mathlib/RingTheory/Ideal/KrullsHeightTheorem.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
15-15241 15 days ago |
16-21194 16 days ago |
16-21120 16 days |
| 41449 |
EzequielS2 author:EzequielS2 |
feat(Topology/ContinuousMap): domMulAct action on C(X, Y) |
## Summary
- Define the action of `Mᵈᵐᵃ` on `C(α, β)` when `M` acts continuously on `α`.
- Add `SMul`, `MulAction`, `SMulCommClass`, and `ContinuousSMul` instances.
- Closes #5379.
## Test plan
- [x] `lake build Mathlib.Topology.ContinuousMap.DomAct`
- [x] `lake exe runLinter Mathlib.Topology.ContinuousMap.DomAct`
|
t-topology
new-contributor
|
101/0 |
Mathlib.lean,Mathlib/Topology/ContinuousMap/DomAct.lean |
2 |
3 |
['github-actions'] |
nobody |
none |
14-79822 14 days ago |
14-80527 14 days ago |
14-79992 14 days |
| 41454 |
EzequielS2 author:EzequielS2 |
feat(Topology/ContinuousMap): domMulAct action on bounded continuous maps |
## Summary
- Define the action of `Mᵈᵐᵃ` on bounded continuous functions `α →ᵇ β`.
- Add basic instances and simp lemmas.
## Dependency
Depends on #41449. I will rebase onto `master` after that PR merges.
## Test plan
- [x] `lake build Mathlib.Topology.ContinuousMap.Bounded.DomAct`
- [x] `lake exe runLinter Mathlib.Topology.ContinuousMap.Bounded.DomAct`
|
new-contributor
t-topology
|
184/0 |
Mathlib.lean,Mathlib/Topology/ContinuousMap/Bounded/DomAct.lean,Mathlib/Topology/ContinuousMap/DomAct.lean |
3 |
2 |
['github-actions'] |
nobody |
none |
14-75304 14 days ago |
14-77511 14 days ago |
14-76976 14 days |
| 41450 |
chenson2018 author:chenson2018 |
chore: remove uses of `Subrelation` |
Following up on the description of #40792, this removes additional uses of `Subrelation` now that #30526 has been merged.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
19/20 |
Mathlib/Logic/Relation.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
14-74538 14 days ago |
14-78328 14 days ago |
14-77793 14 days |
| 41458 |
SnirBroshi author:SnirBroshi |
feat(Data/List/Basic): lists with equal `tail` and `dropLast` are equal |
(except for subsingleton lists), and also lists with equal `head?` and `tail`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
17/0 |
Mathlib/Data/List/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
14-72476 14 days ago |
14-75280 14 days ago |
14-74745 14 days |
| 41469 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Coloring/EdgeLabeling): `Unique` & `IsEmpty` instances and simplify `mk` |
---
The changes aren't related, they're just small so I grouped them together.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
8/5 |
Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeLabeling.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
14-65380 14 days ago |
14-67270 14 days ago |
14-66735 14 days |
| 41459 |
EzequielS2 author:EzequielS2 |
feat(Algebra/Group): mulOpposite equivs for submonoid and subgroup |
## Summary
Add MulOpposite monoid equivalences for submonoids and subgroups, and remove the corresponding TODOs in `Subsemiring/MulOpposite.lean`.
## Test plan
- [x] `lake build` and `lake exe runLinter` on `Mathlib.Algebra.Group.Submonoid.MulOpposite` and `Mathlib.Algebra.Group.Subgroup.MulOpposite`
|
t-algebra
new-contributor
label:t-algebra$ |
78/4 |
Mathlib/Algebra/Group/Subgroup/MulOpposite.lean,Mathlib/Algebra/Group/Submonoid/MulOpposite.lean,Mathlib/Algebra/Ring/Subsemiring/MulOpposite.lean |
3 |
9 |
['EzequielS2', 'github-actions', 'wwylele'] |
nobody |
none |
14-49959 14 days ago |
14-74129 14 days ago |
14-73594 14 days |
| 41466 |
EzequielS2 author:EzequielS2 |
feat(Algebra/Order): stronger sublist product inequality via diff |
## Summary
Add `Sublist.prod_le_prod'_of_mem_diff` and `Sublist.sum_le_sum_of_mem_diff`.
## Test plan
- [x] `lake build` and `lake exe runLinter` on `Mathlib.Algebra.Order.BigOperators.Group.List`
|
t-algebra
new-contributor
label:t-algebra$ |
13/4 |
Mathlib/Algebra/Order/BigOperators/Group/List.lean |
1 |
6 |
['EzequielS2', 'github-actions', 'wwylele'] |
nobody |
none |
14-48772 14 days ago |
14-68501 14 days ago |
14-67966 14 days |
| 41218 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Star): the star graph is the only triangle-free graph with a universal vertex |
- `starGraph r |>.CliqueFree 3`
- `G.IsUniversal v → G.CliqueFree 3 → G = starGraph v`
- `G.IsUniversal v → (G.IsAcyclic ↔ G.CliqueFree 3)`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
29/4 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Star.lean |
2 |
3 |
['github-actions', 'vlad902'] |
nobody |
none |
14-37285 14 days ago |
20-82717 20 days ago |
21-51487 21 days |
| 41310 |
SnirBroshi author:SnirBroshi |
feat(Algebra/Group/Subgroup/ZPowers/Lemmas): generalize from pairs to `Finset`s |
Generalize `closure_eq_zmultiples`/`zmultiples_sup`/`zmultiples_inf` from pairs to `Finset`s. For `s : Finset ℤ`:
- `closure (s : Set ℤ) = zmultiples (s.gcd id)`
- `s.sup zmultiples = zmultiples (s.gcd id)`
- `s.inf zmultiples = zmultiples (s.lcm id)`
---
If the large imports aren't okay we could have a new `ZPowers/Finset.lean` or `ZPowers/FinsetLemmas.lean`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41261
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
28/3 |
Mathlib/Algebra/Group/Subgroup/ZPowers/Lemmas.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
none |
14-33786 14 days ago |
14-35100 14 days ago |
14-36686 14 days |
| 41467 |
vlad902 author:vlad902 |
chore(MulLECancellable): rename lemmas |
Right now MulLECancellable has dual `Injective/inj` and `injective_left/inj_left` lemmas. Rename the first pair to `injective_right/inj_right` to match and add a `IsRightRegular` lemma to match the `IsLeftRegular` one.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
25/9 |
Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Order/Sub/Unbundled/Basic.lean,Mathlib/Data/ENNReal/Operations.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
14-23432 14 days ago |
14-26391 14 days ago |
14-28642 14 days |
| 39993 |
Brian-Nugent author:Brian-Nugent |
feat(Topology/CategoryTheory): TopologicalSpace.Opens.map preserves colimits and finite limits |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39992
- [ ] depends on: #39991
[](https://gitpod.io/from-referrer/)
|
t-topology
t-category-theory
large-import
|
50/17 |
Mathlib/Geometry/RingedSpace/OpenImmersion.lean,Mathlib/Geometry/RingedSpace/PresheafedSpace/Gluing.lean,Mathlib/Topology/Category/TopCat/Opens.lean,Mathlib/Topology/Sheaves/Presheaf.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
none |
14-20698 14 days ago |
14-20701 14 days ago |
14-20166 14 days |
| 41484 |
FernandoChu author:FernandoChu |
feat(CategoryTheory): kan extensions from isos |
This PR constructs lifts out of isomorphisms of 1-cells, and shows that being (abs) Kan is preserved by this. This is done for all four notions of left/right lifts/extensions.
This is needed for the oo-cosmos project.
----
**AI disclosure**. Claude was used in defining the API for the left extension case. After manually fixing its bad proofs/definitions/docstrings, Claude was later asked to replicate this for the other three cases, which I again finetuned. |
t-category-theory
LLM-generated
large-import
|
330/3 |
Mathlib/CategoryTheory/Bicategory/Extension.lean,Mathlib/CategoryTheory/Bicategory/Kan/IsKan.lean |
2 |
3 |
['FernandoChu', 'github-actions', 'grunweg'] |
nobody |
none |
14-16452 14 days ago |
14-21654 14 days ago |
14-21119 14 days |
| 41443 |
alreadydone author:alreadydone |
feat(RingTheory/AdjoinRoot): add AdjoinRoot.isFractionRing |
Co-authored-by: Sriram Chinthalagiri Venkata @sriram3301
Co-authored-by: David Kurniadi Angdinata @Multramate
This contribution was created as part of the Heidelberg Lean workshop "Formalising algebraic geometry" in November 2025.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-ring-theory
label:t-algebra$ |
88/7 |
Mathlib/RingTheory/AdjoinRoot.lean,Mathlib/RingTheory/Algebraic/Integral.lean,Mathlib/RingTheory/Localization/Algebra.lean |
3 |
3 |
['alreadydone', 'github-actions', 'leanprover-radar'] |
nobody |
none |
14-8713 14 days ago |
14-62350 14 days ago |
15-4196 15 days |
| 41306 |
vlad902 author:vlad902 |
feat(SimpleGraph): reduce CycleGraph imports |
Reduce the imports for CycleGraph.lean and re-prove and move a few lemmas around as a result.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
44/23 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/CycleGraph.lean,Mathlib/Combinatorics/SimpleGraph/Hasse.lean |
3 |
13 |
['SnirBroshi', 'github-actions', 'vlad902'] |
nobody |
1 |
14-5881 14 days ago |
19-24226 19 days ago |
19-23733 19 days |
| 41494 |
FordUniver author:FordUniver |
feat(Analysis/Convex): first-order convexity inequalities |
Adds first-order characterizations of convexity for differentiable functions in three forms — directional, Fréchet, and gradient — together with concave duals, strict variants, iff converses, and the first-order optimality corollaries `ConvexOn.isMinOn_of_fderiv_eq_zero` / `ConvexOn.isMinOn_of_gradient_eq_zero`. `Analysis.Convex.Deriv` picks up the 1D additive forms of the slope inequalities.
---
The motivation is the Baillon–Haddad theorem in the Lipschitz-smooth stack (#39574 and follow-ups), whose proof plays the gradient form of the first-order convexity inequality against the descent bound of a `K`-smooth function. `LineDeriv` carries the proof content via 1D line restriction (`ConvexOn.lineRestriction`); `FDeriv` and `Gradient` are restatements via `lineDeriv_eq_fderiv` and Riesz (`inner_gradient_left`) respectively. This inverts mathlib's usual FDeriv-as-foundation default because convex first-order inequalities are naturally 1D — they only need directional differentiability, and the FDeriv/gradient forms are strictly stronger restatements.
- [x] depends on: #39203
- [x] depends on: #39198
|
t-analysis |
503/0 |
Mathlib.lean,Mathlib/Analysis/Convex/Deriv.lean,Mathlib/Analysis/Convex/FDeriv.lean,Mathlib/Analysis/Convex/Gradient.lean,Mathlib/Analysis/Convex/LineDeriv.lean |
5 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
none |
14-840 14 days ago |
14-3097 14 days ago |
14-2562 14 days |
| 36813 |
AlexeyMilovanov author:AlexeyMilovanov |
feat(Computability.Encoding): add self-delimiting unary and pair encodings |
Adds self-delimiting boolean encodings to `Mathlib.Computability.Encoding`.
**Key changes:**
* **`unaryPrefixEncodingNat`**: A self-delimiting unary `Encoding ℕ Bool`, using the code $1^n0$.
* **`encodingProdBool`**: Builds an `Encoding (α × β) Bool` from boolean encodings of `α` and `β`, by prefixing the length of the first encoded component.
* **`encodingListBool`**: Builds an `Encoding (List α) Bool` from a boolean encoding of `α`, using self-delimiting element encodings.
* **`UnaryPrefix` helpers**: Internal-style helper API for the underlying length-prefixed boolean-list encoding and decoding. |
t-computability
new-contributor
|
98/0 |
Mathlib/Computability/Encoding.lean |
1 |
6 |
['AlexeyMilovanov', 'Komyyy', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
none |
13-82533 13 days ago |
13-82533 13 days ago |
30-37875 30 days |
| 41503 |
JovanGerb author:JovanGerb |
feat(GRewrite): support strict rewriting in `>`/`≥` |
This PR adds `gcongr strict` tags in order to support strict rewriting in `≥`/`>`. Previously this only worked in `≤`/`<`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
9/0 |
Mathlib/Order/Basic.lean,MathlibTest/Tactic/GRewrite.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
13-80475 13 days ago |
13-83932 13 days ago |
13-83397 13 days |
| 41512 |
teorth author:teorth |
feat (Order/Interval/Finset/Floor): Relating membership of an Int or Nat cast in intervals to intervals of floor and ceil functions |
For a `FloorRing` (resp. `FloorSemiring`) `α`, we relate membership of a cast `↑n` in an interval
of `α` to membership of the integer (resp. natural number) `n` in the corresponding interval with
floor/ceil endpoints, for instance `Int.coe_mem_Ioc_iff : ↑n ∈ Set.Ioc a b ↔ n ∈ Set.Ioc ⌊a⌋ ⌊b⌋`.
If the right-hand side is finite, we express them as `Finset` instead.
---
AI was used to extend a small initial set of human-generated lemmas to the full set in this PR, which were then reviewed and edited by myself.
This code is placed in a new file because the core `Algebra.Order.Floor` files explicitly disallow the use of `Finset`.
[](https://gitpod.io/from-referrer/)
|
t-order |
85/0 |
Mathlib.lean,Mathlib/Order/Interval/Finset/Floor.lean |
2 |
2 |
['github-actions'] |
nobody |
none |
13-68147 13 days ago |
13-69778 13 days ago |
13-69243 13 days |
| 41389 |
felixpernegger author:felixpernegger |
chore: reduce `import all` |
Removes `import all` whenever possible. I also tried to "downgrade" by changing to `import` from `import all`, but that never made a difference. Excludes MathlibTest.
For a related PR, see #41222.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
0/7 |
Mathlib/Control/Monad/Cont.lean,Mathlib/Data/Fintype/Parity.lean,Mathlib/Data/Int/Bitwise.lean,Mathlib/Lean/Meta/RefinedDiscrTree/Encode.lean,Mathlib/Tactic/GCongr/Core.lean,Mathlib/Tactic/PNatToNat.lean |
6 |
7 |
['felixpernegger', 'github-actions', 'grunweg', 'leanprover-radar'] |
nobody |
none |
13-61340 13 days ago |
16-74283 16 days ago |
16-73748 16 days |
| 41514 |
teorth author:teorth |
feat(Topology/MetricSpace/Heine-Cantor): metric ε-δ forms of Heine–Cantor |
Add (pseudo-)metric space (or "epsilon-delta") versions of many of the versions of the Heine-Cantor theorem (continuous functions on compacta are uniformly continuous) from `Topology.UniformSpace.HeineCantor` into a new file
`Topology.Metric.HeineCantor`.
---
A new file needed to be created because many files downstream of this file blocked the use of `UniformOnFun`.
AI assistance was used to expand a small initial set of human-generated lemmas into a larger set, with the latter then reviewed by both an AI tool and myself.
[](https://gitpod.io/from-referrer/)
|
t-topology |
71/0 |
Mathlib.lean,Mathlib/Topology/MetricSpace/HeineCantor.lean |
2 |
2 |
['github-actions'] |
nobody |
none |
13-61219 13 days ago |
13-62806 13 days ago |
13-62372 13 days |
| 38975 |
ldct author:ldct |
feat(EReal): Add equations for EReal |
Add equational lemmas for the simplifier to simplify `[natural number literal] + ⊤` in `EReal`, and add a test file in `MathlibTest/EReal.lean`.
Without these lemmas, `simp` fails to close many of the goals in `MathlibTest/EReal.lean`. I believe simp should close all of them.
An alternative is to add something like this as a simp lemma, to allow `top_add_of_ne_bot` to make progress, but it's not clear to me that this is desirable as a simp lemma, since it's not equational
```
example {n : ℕ} [n.AtLeastTwo] : (ofNat(n) : EReal) ≠ ⊤ := by
exact Ne.symm (not_eq_of_beq_eq_false rfl)
```
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
32/0 |
Mathlib/Data/EReal/Operations.lean,MathlibTest/EReal.lean |
2 |
2 |
['github-actions', 'vihdzp'] |
nobody |
none |
13-49712 13 days ago |
77-56897 77 days ago |
77-56362 77 days |
| 40534 |
mcdoll author:mcdoll |
feat(Algebra): introduce notation typeclass for composition of functions |
This PR defines two new typeclasses: `FComp` and `IsCompApply`. The former is just a notation typeclass with notation `(g ∘ᶠ f)` and the second one asserts that `(g ∘ᶠ f) x = g (f x)`.
---
There are two PRs that illustrate the use of these classes: #41169 and #41224
The second one is closer to what we actually implement here, but not sorry-free (because I ran into unrelated defeq abuse pretty far down the line)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
106/15 |
Mathlib/Algebra/Notation/Defs.lean,Mathlib/Algebra/SkewMonoidAlgebra/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Data/FunLike/IsApply.lean,Mathlib/Geometry/Manifold/GroupLieAlgebra.lean,Mathlib/Geometry/Manifold/VectorField/LieBracket.lean,Mathlib/NumberTheory/Height/Basic.lean,Mathlib/Probability/Distributions/Gaussian/HasGaussianLaw/Independence.lean,Mathlib/RingTheory/Coalgebra/Basic.lean,Mathlib/Topology/VectorBundle/Hom.lean |
10 |
1 |
['github-actions'] |
nobody |
none |
13-40036 13 days ago |
13-40036 13 days ago |
13-39501 13 days |
| 41098 |
vlad902 author:vlad902 |
feat(RingTheory): krull dimension of a polynomial ring in an infinite number of variables |
Add a simp lemma that `dim(R[X_1, ...]) = ∞` and also derive an ENat-valued lemma that `dim(R[X_s]) = dim(R) + card(X_s)`. Note that I keep the original lemma for finite index sets as @[simp] since this is likely to be the more common case in practice.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
30/1 |
Mathlib/Data/ENat/Basic.lean,Mathlib/RingTheory/KrullDimension/NonZeroDivisors.lean,Mathlib/RingTheory/KrullDimension/Polynomial.lean |
3 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
13-25981 13 days ago |
13-28013 13 days ago |
24-72375 24 days |
| 41399 |
vlad902 author:vlad902 |
feat(MvPolynomial): ideal generated by variables is prime over a domain |
---
AI: Used Claude to help search for lemmas and golf, no AI code made it into the final PR.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
38/5 |
Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/RingTheory/MvPolynomial/Ideal.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
13-21316 13 days ago |
16-21210 16 days ago |
16-22086 16 days |
| 40904 |
jiangf13 author:jiangf13 |
chore(Algebra/Group/WithOne): remove stale TODO |
The TODO claimed that `WithOne.coe_mul` and `WithZero.coe_mul` have inconsistent implicit parameters. Their current signatures are both of the form `{α} [Mul α] (a b : α)`, so the TODO is stale.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
0/4 |
Mathlib/Algebra/Group/WithOne/Defs.lean |
1 |
2 |
['Multramate', 'github-actions'] |
nobody |
1 |
13-20332 13 days ago |
29-82900 29 days ago |
29-82365 29 days |
| 40952 |
tb65536 author:tb65536 |
feat(Algebra/Group/Subgroup/Basic): monotonicity of inertia subgroups |
This PR proves that inertia subgroups are monotone.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
5/1 |
Mathlib/Algebra/Group/Subgroup/Basic.lean |
1 |
1 |
['Multramate', 'github-actions'] |
nobody |
1 |
13-19897 13 days ago |
29-70 28 days ago |
28-85936 28 days |
| 36815 |
EtienneC30 author:EtienneC30 |
feat: a measurable space structure on the type of continuous maps |
Endow the type `C(X, Y)` of continuous maps from `X` to `Y` with the Borel sigma-algebra coming from the compact-open topology and show that, under some assumptions on `X` and `Y`, this is equal to the restriction of the product sigma-algebra over `X → Y`.
Provide a measurable equivalence between `{f : X → Y // Continuous f}` and `C(X, Y)`.
Co-authored-by: @RemyDegenne
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
brownian
t-measure-probability
|
256/0 |
Mathlib.lean,Mathlib/MeasureTheory/Constructions/BorelSpace/ContinuousMap.lean,Mathlib/Topology/Bases.lean,Mathlib/Topology/Basic.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Separation/Regular.lean |
6 |
27 |
['ADedecker', 'EtienneC30', 'felixpernegger', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
13-17340 13 days ago |
78-22554 78 days ago |
118-17369 118 days |
| 41521 |
BryceT233 author:BryceT233 |
chore(Algebra/Order/Antidiag): relax an assumption in the definition of `HasAntidiagonal` |
This PR relaxes the typeclass requirement for `HasAntidiagonal` from `AddMonoid A` to `Add A`, which is useful for defining multiplications in `TotalMonoidAlgebra`(#41472).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
16/17 |
Mathlib/Algebra/Order/Antidiag/Prod.lean,Mathlib/Algebra/Order/Antidiag/Tendsto.lean |
2 |
4 |
['BryceT233', 'eric-wieser', 'github-actions'] |
nobody |
none |
13-15147 13 days ago |
13-17401 13 days ago |
13-40601 13 days |
| 41433 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): more path/circuit/cycle lemmas |
- two `(p.append q).IsPath` lemmas (splitting to either `p` & `q.tail` or `p.dropLast` & `q`)
- `p.reverse.IsCircuit`
- `p.dropLast.IsPath ↔ p.tail.IsPath`
- `p.IsCycle ↔ p.dropLast.IsPath ∧ 3 ≤ p.length`
---
Golfs a few small things using the new lemmas as a drive by.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
35/9 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
13-14515 13 days ago |
13-15090 13 days ago |
15-46441 15 days |
| 40328 |
xroblot author:xroblot |
feat(FieldTheory/IntermediateField): add PowerBasis.ofAdjoinSimpleEqTop |
Adds `PowerBasis.ofAdjoinSimpleEqTop`, the `IntermediateField.adjoin` analogue of the
existing `PowerBasis.ofAdjoinEqTop` (which uses `Algebra.adjoin`): if `α` generates `L`
over `K` (i.e. `K⟮α⟯ = ⊤`) and is integral over `K`, then `α` defines a `PowerBasis`
for `L` over `K`.
The declaration is placed in `Mathlib.FieldTheory.IntermediateField.Adjoin.Basic`
(alongside `adjoin.powerBasis` and `adjoin.finrank`) rather than `Adjoin.Algebra`,
since its proof uses `adjoin.powerBasis` and `PowerBasis.map`.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
18/0 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
13-13467 13 days ago |
44-85104 44 days ago |
44-84811 44 days |
| 41541 |
felixpernegger author:felixpernegger |
chore: prefer `classical` over `open scoped Classical` in proofs |
In #41423 it came up that it is preferable to use `classical` in proofs instead of `open (scoped) Classical`, as its slightly easier to maintain. This PR replaces all such occurences where it can be reasonably done.
This is likely my last PR about this topic.
(I used Claude to fix some git issue, which is why it shows up in the commit)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
111/58 |
Mathlib/Logic/Basic.lean,Mathlib/Logic/Function/Basic.lean,Mathlib/Order/Basic.lean,Mathlib/Order/Defs/PartialOrder.lean |
4 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
none |
12-79530 12 days ago |
12-82605 12 days ago |
12-82070 12 days |
| 41135 |
martinwintermath author:martinwintermath |
feat(Algebra/Order/Nonneg): generalize Nonneg/Field.lean to `DivisionSemiring` |
Generalizes the content of Nonneg/Field.lean from `Semifield` to `DivisionSemiring`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
15/5 |
Mathlib/Algebra/Order/Nonneg/Field.lean |
1 |
5 |
['github-actions', 'leanprover-radar', 'themathqueen'] |
nobody |
none |
12-78215 12 days ago |
23-56933 23 days ago |
23-56398 23 days |
| 41537 |
Mathias-Stout author:Mathias-Stout |
feat(RingTheory/TwoSidedIdeal/Lattice): add lemmas on two-sided ideals |
We add three lemmas on two-sided ideals.
These are analogues of existing lemmas of `Submodule` with the same names.
This prepares a follow-up PR proving that quaternions are central simple.
Co-authored-by: Justus Springer [justusspringer@gmx.de](mailto:justusspringer@gmx.de)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
|
13/0 |
Mathlib/RingTheory/TwoSidedIdeal/Lattice.lean |
1 |
5 |
['Whysoserioushah', 'github-actions', 'kbuzzard'] |
nobody |
1 |
12-76864 12 days ago |
12-79307 12 days ago |
13-149 13 days |
| 41438 |
SnirBroshi author:SnirBroshi |
doc(Matrix): mention bundled forms in docstrings |
Followup to https://github.com/leanprover-community/mathlib4/pull/39123#issuecomment-4798925362
---
As in `Matrix.map`s docstring, the convention is "This is available in bundled forms as" and then listing bundled versions in asterisk bullet-points.
If there's only one item I went with "This is available in a bundled form as X".
For `Matrix.entry{AddHom/AddMonoidHom/LinearMap}` none of them is the "main" definition, so I added "see also" for each of them listing the other two.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
88/15 |
Mathlib/Data/Matrix/Basic.lean,Mathlib/Data/Matrix/Composition.lean,Mathlib/Data/Matrix/Diagonal.lean,Mathlib/Data/Matrix/Mul.lean,Mathlib/LinearAlgebra/Matrix/ConjTranspose.lean,Mathlib/LinearAlgebra/Matrix/Defs.lean,Mathlib/LinearAlgebra/Matrix/Determinant/Basic.lean,Mathlib/LinearAlgebra/Matrix/Permutation.lean |
8 |
6 |
['eric-wieser', 'github-actions', 'mathlib-splicebot', 'themathqueen'] |
nobody |
none |
12-74724 12 days ago |
15-28638 15 days ago |
15-28103 15 days |
| 41548 |
JovanGerb author:JovanGerb |
chore: use `to_dual` for `DedekindCut` |
This PR uses `to_dual` in DedekindCut.
To make this work, we add a shortcut `PartialOrder` instance. We also add some specialized `DedekindCut` theorems, from the more general `Concept` theorems.
Two `gcongr` tags are also added on appropriate lemmas.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
35/18 |
Mathlib/Order/Completion.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
12-73660 12 days ago |
12-74393 12 days ago |
12-73858 12 days |
| 41523 |
Harmenszoon author:Harmenszoon |
feat(Analysis/SpecialFunctions): add the Chase-Lovett diagonal reduction for binEntropy |
This PR adds the two-variable entropy inequality of Chase and Lovett ([arXiv:2211.11689](https://arxiv.org/abs/2211.11689), Lemma 2.2): for `x, y ∈ [0, 1]`,
```
x * binEntropy y + y * binEntropy x ≤ 2 * sqrt (x * y) * binEntropy (sqrt (x * y))
```
in a new leaf file `Mathlib/Analysis/SpecialFunctions/BinaryEntropy/Diagonal.lean`, together with its `negMulLog (1 - ·)` half (`Real.mul_negMulLog_one_sub_add_le`) and a `private` concavity layer for the comparison function `η u = exp u * negMulLog (1 - exp (-u))`. Two entries are added to `docs/references.bib` (Chase–Lovett arXiv:2211.11689, Boppana arXiv:2301.09664).
**Motivation.** This inequality is the reusable reduction step behind the recent entropic lower bounds for Frankl's union-closed sets conjecture (Gilmer; Alweiss–Huang–Sellke; Chase–Lovett; Sawin; Boppana): it reduces two-variable inequalities of Boppana type `K * (x * h y + y * h x) ≤ h (x * y)` to one-variable inequalities `2 * K * t * h t ≤ h (t ^ 2)`. `Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean` currently contains calculus basics for `binEntropy` only, and no inequality of this family; I checked current master for collisions before opening this. A kernel-checked downstream application — a complete Lean formalization of the union-closed lower bound at the constant `(3 - √5)/2` that uses exactly this reduction — is public at https://github.com/demonstrandum-research/artifacts (the `UCFrankl` development), which I maintain.
**Proof shape** (one page of calculus): substituting `x = exp (-u)`, the inequality becomes midpoint concavity of `η` on `[0, ∞)`; the `negMulLog (x * y)` parts of the two sides cancel exactly, the `negMulLog (1 - ·)` parts transfer to `η` via the identity `x * η (-log x) = negMulLog (1 - x)`, and `η'' ≤ 0` reduces to `log t ≤ t - 1`. Stating `η` through `negMulLog` absorbs the `0 * log 0` boundary behaviour, so no separate edge-case argument is needed at `x = 1`.
**Design notes / open questions for reviewers.**
- Hypotheses are stated as `0 ≤ x`/`x ≤ 1` pairs rather than `x ∈ Set.Icc 0 1`; happy to convert if the membership form is preferred.
- The `η`-machinery is `private`; it could be exposed if judged independently useful.
- File placement: a new `BinaryEntropy/Diagonal.lean` leaf keeps the import footprint of `BinaryEntropy.lean` unchanged (the proof needs `Analysis.Convex.Deriv`); merging into the main file is also possible if preferred.
- Naming: `mul_binEntropy_add_mul_binEntropy_le` / `mul_negMulLog_one_sub_add_le` follow the conclusion-based convention but I am glad to rename.
**AI disclosure** (per the [mathlib AI policy](https://leanprover-community.github.io/contribute/index.html)): the Lean code in this PR was generated by LLM agents (Anthropic's Claude, running in an agent pipeline that I operate under the name Demonstrandum), and was then compile-verified against mathlib and reviewed by me. This PR description was also prepared with AI assistance and reviewed by me. The proof is elementary calculus as summarized above; I understand it and take full responsibility for the contribution. I am adding the `LLM-generated` label as required. The downstream `UCFrankl` development linked above (kernel-checked, axioms `[propext, Classical.choice, Quot.sound]` only) is the evidence that the lemma carries real weight in applications.
---
- [x] depends on: nothing
|
t-analysis
LLM-generated
new-contributor
|
227/0 |
Mathlib.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy/Diagonal.lean,docs/references.bib |
3 |
5 |
['Harmenszoon', 'Timeroot', 'github-actions'] |
nobody |
none |
12-69774 12 days ago |
13-38514 13 days ago |
13-37979 13 days |
| 40448 |
ChiCubed author:ChiCubed |
feat(LinearAlgebra/Dimension): tower law for algebraic extensions |
We generalise the tower law for `Module.rank` to the situation of a module over an algebraic extension of domains.
---
See [the Zulip thread](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Tower.20law.20for.20.60Module.2Erank.60/) for some associated discussion.
I am not sure about in which file these results should live, or what their names should be. For the file I have gone with `LinearAlgebra/Dimension/Algebraic.lean` for now, because these feel more like dimension theorems than `Algebra.IsAlgebraic` theorems, and IMO do not logically fit into the other existing files in `LinearAlgebra/Dimension`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
109/3 |
Mathlib.lean,Mathlib/LinearAlgebra/Dimension/Algebraic.lean,Mathlib/LinearAlgebra/Dimension/Free.lean |
3 |
5 |
['ChiCubed', 'eric-wieser', 'github-actions', 'themathqueen'] |
nobody |
none |
12-62357 12 days ago |
12-63898 12 days ago |
42-28971 42 days |
| 41554 |
felixpernegger author:felixpernegger |
chore: remove `noncomputable section` when only theorems in file |
Removes `noncomputable section` whenever no def/abbrev/instances appear in the section.
This is not the most important change, but prepares for a more general cleanup around `noncomputable`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
10/243 |
Mathlib/Algebra/GroupWithZero/Range.lean,Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/Polynomial/Degree/Domain.lean,Mathlib/Algebra/Polynomial/Degree/Lemmas.lean,Mathlib/Algebra/Polynomial/Degree/Monomial.lean,Mathlib/Algebra/Polynomial/Degree/Support.lean,Mathlib/Algebra/Polynomial/Degree/Units.lean,Mathlib/Algebra/Polynomial/Eval/Algebra.lean,Mathlib/Algebra/Polynomial/Eval/Irreducible.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Analysis/Analytic/Within.lean,Mathlib/Analysis/BoxIntegral/DivergenceTheorem.lean,Mathlib/Analysis/Calculus/ContDiff/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Analysis/Calculus/ContDiff/Comp.lean,Mathlib/Analysis/Calculus/ContDiff/Deriv.lean,Mathlib/Analysis/Calculus/ContDiff/FiniteDimension.lean,Mathlib/Analysis/Calculus/ContDiff/RCLike.lean,Mathlib/Analysis/Calculus/Deriv/Mul.lean,Mathlib/Analysis/Calculus/FDeriv/Add.lean,Mathlib/Analysis/Calculus/FDeriv/Basic.lean,Mathlib/Analysis/Calculus/FDeriv/Bilinear.lean,Mathlib/Analysis/Calculus/FDeriv/Comp.lean,Mathlib/Analysis/Calculus/FDeriv/Congr.lean,Mathlib/Analysis/Calculus/FDeriv/Const.lean,Mathlib/Analysis/Calculus/FDeriv/Equiv.lean,Mathlib/Analysis/Calculus/FDeriv/Prod.lean,Mathlib/Analysis/Calculus/FDeriv/RestrictScalars.lean,Mathlib/Analysis/Calculus/ParametricIntegral.lean,Mathlib/Analysis/Complex/CauchyIntegral.lean,Mathlib/Analysis/Complex/ReImTopology.lean,Mathlib/Analysis/Fourier/PoissonSummation.lean,Mathlib/Analysis/Fourier/RiemannLebesgueLemma.lean,Mathlib/Analysis/InnerProductSpace/Continuous.lean,Mathlib/Analysis/MeanInequalities.lean,Mathlib/Analysis/Normed/Module/Dual.lean,Mathlib/Analysis/SpecialFunctions/ExpDeriv.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/GaussianIntegral.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/PoissonSummation.lean,Mathlib/Analysis/SpecialFunctions/JapaneseBracket.lean,Mathlib/Analysis/SpecialFunctions/Log/Monotone.lean,Mathlib/Analysis/SpecialFunctions/Pow/Asymptotics.lean,Mathlib/Analysis/SpecialFunctions/Pow/Continuity.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/ArctanDeriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Complex.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/ComplexDeriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/InverseDeriv.lean,Mathlib/CategoryTheory/Limits/EssentiallySmall.lean,Mathlib/CategoryTheory/Limits/Preserves/Opposites.lean,Mathlib/CategoryTheory/Sites/CoverPreserving.lean,Mathlib/Data/Finsupp/PointwiseSMul.lean,Mathlib/Data/W/Cardinal.lean,Mathlib/Dynamics/Ergodic/Conservative.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/MvRatFunc/Rank.lean,Mathlib/FieldTheory/PurelyInseparable/Tower.lean,Mathlib/Geometry/Euclidean/Angle/Oriented/RightAngle.lean,Mathlib/Geometry/Euclidean/Angle/Sphere.lean,Mathlib/Geometry/Euclidean/Angle/Unoriented/RightAngle.lean,Mathlib/Geometry/Euclidean/Basic.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/Geometry/Manifold/MFDeriv/Basic.lean,Mathlib/Geometry/Manifold/MFDeriv/FDeriv.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/Geometry/Manifold/MFDeriv/UniqueDifferential.lean,Mathlib/Geometry/Manifold/SmoothApprox.lean,Mathlib/Geometry/Manifold/SmoothEmbedding.lean,Mathlib/LinearAlgebra/Charpoly/ToMatrix.lean,Mathlib/LinearAlgebra/Dimension/ErdosKaplansky.lean,Mathlib/LinearAlgebra/Finsupp/Span.lean,Mathlib/LinearAlgebra/LinearIndependent/Basic.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/FiniteField.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/Minpoly.lean,Mathlib/LinearAlgebra/Matrix/Diagonal.lean,Mathlib/LinearAlgebra/PerfectPairing/Restrict.lean,Mathlib/LinearAlgebra/RootSystem/Finite/Lemmas.lean,Mathlib/LinearAlgebra/RootSystem/GeckConstruction/Relations.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/Indicator.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/Real.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Indicator.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Monotonicity.lean,Mathlib/MeasureTheory/Function/LpSeminorm/SMul.lean,Mathlib/MeasureTheory/Function/SpecialFunctions/RCLike.lean,Mathlib/MeasureTheory/Integral/ExpDecay.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/ContDiff.lean,Mathlib/MeasureTheory/Integral/Layercake.lean,Mathlib/MeasureTheory/Integral/Prod.lean,Mathlib/MeasureTheory/MeasurableSpace/Pi.lean,Mathlib/MeasureTheory/MeasurableSpace/Prod.lean,Mathlib/MeasureTheory/Measure/Decomposition/RadonNikodym.lean,Mathlib/MeasureTheory/Measure/Portmanteau.lean,Mathlib/MeasureTheory/OuterMeasure/Basic.lean,Mathlib/NumberTheory/AbelSummation.lean,Mathlib/NumberTheory/LSeries/SumCoeff.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Summable.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/IsBoundedAtImInfty.lean |
124 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
none |
12-52827 12 days ago |
12-55147 12 days ago |
12-54612 12 days |
| 36202 |
vihdzp author:vihdzp |
feat: more theorems on the Cantor normal form |
We also remove some redundant assumptions.
Used in the CGT repo.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory |
68/17 |
Mathlib/SetTheory/Ordinal/CantorNormalForm.lean |
1 |
21 |
['SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
1 |
12-49708 12 days ago |
119-19480 119 days ago |
138-10906 138 days |
| 41558 |
JovanGerb author:JovanGerb |
chore(order/ConditionallyCompleteLattice): use `to_dual` more |
This PR uses `to_dual` in most remaining places in `Mathlib.Order.ConditionallyCompleteLattice.Basic`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
98/228 |
Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Defs.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
12-37416 12 days ago |
12-40542 12 days ago |
12-40007 12 days |
| 41559 |
JovanGerb author:JovanGerb |
chore(Data/List/MinMax): use `to_dual` |
This PR uses `to_dual` to translate some theorems about maxima and minima on lists.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
61/179 |
Mathlib/Data/List/MinMax.lean,Mathlib/Tactic/ToDual.lean,Mathlib/Tactic/Translate/ToDual.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
12-36422 12 days ago |
12-39585 12 days ago |
12-39050 12 days |
| 40981 |
LLaurance author:LLaurance |
chore(Algebra/Ring/BooleanRing): resolve TODO on non-terminal simp |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
1/3 |
Mathlib/Algebra/Ring/BooleanRing.lean |
1 |
2 |
['Multramate', 'github-actions'] |
nobody |
1 |
12-10746 12 days ago |
12-11294 12 days ago |
28-2495 28 days |
| 41429 |
felixpernegger author:felixpernegger |
chore(Combinatorics): remove a `set_option backward.privateInPublic` |
Together with #41410 this removes all but one global `set_option backward.privateInPublic true`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
8/7 |
Mathlib/Combinatorics/Matroid/Basic.lean,Mathlib/Combinatorics/Matroid/Dual.lean,Mathlib/Combinatorics/Matroid/Loop.lean,Mathlib/Combinatorics/Matroid/Minor/Restrict.lean |
4 |
13 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts', 'vlad902'] |
nobody |
none |
12-7563 12 days ago |
12-8431 12 days ago |
14-8005 14 days |
| 41565 |
grunweg author:grunweg |
chore: specify doc-strings of auto-generated additive declarations di… |
…rectly
There's no need for add_decl_doc any more.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
64/107 |
Mathlib/Algebra/Category/Grp/Basic.lean,Mathlib/Algebra/Group/Action/Basic.lean,Mathlib/Algebra/Group/Action/Defs.lean,Mathlib/Algebra/Group/Action/Hom.lean,Mathlib/Algebra/Group/Hom/Basic.lean,Mathlib/Algebra/Group/Subsemigroup/Basic.lean,Mathlib/Algebra/Notation/Defs.lean,Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/GroupTheory/Finiteness.lean,Mathlib/MeasureTheory/Group/Action.lean,Mathlib/MeasureTheory/Measure/MeasureSpaceDef.lean,Mathlib/Topology/Algebra/ConstMulAction.lean |
12 |
1 |
['github-actions'] |
nobody |
none |
11-85388 11 days ago |
12-6211 12 days ago |
12-5676 12 days |
| 41595 |
NoahW314 author:NoahW314 |
feat(Probability/ProbabilityMassFunction): add missing `PMF` instances (`Nontrivial`, `IsEmpty`, etc.) |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
19/0 |
Mathlib/Probability/ProbabilityMassFunction/Basic.lean,Mathlib/Probability/ProbabilityMassFunction/Monad.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
11-74461 11 days ago |
11-75021 11 days ago |
11-74486 11 days |
| 41598 |
NoahW314 author:NoahW314 |
feat(Algebra/Order/BigOperators): add `Finset.prod_le_prod_of_injOn` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
17/0 |
Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/Algebra/Order/BigOperators/GroupWithZero/Finset.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
11-69566 11 days ago |
11-71933 11 days ago |
11-71809 11 days |
| 41604 |
tb65536 author:tb65536 |
feat(NumberTheory/NumberField/Completion/FinitePlace): compatibility of finite places across an algebra map |
Given an extension of finite places, this PR proves compatibility across an algebra map. Eventually it would be nice to have a version stated purely in terms of `FinitePlace`, but we are lacking the ramification theory of finite places required for this (I have larger plans to do ramification theory for absolute values more generally, but this will take some time).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
t-algebra
label:t-algebra$ |
23/4 |
Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
11-60042 11 days ago |
11-60096 11 days ago |
11-59562 11 days |
| 37865 |
Jun2M author:Jun2M |
feat(Combinatorics/Graph): Edge cut of `Graph` |
This PR introduces
- `edgeCut`: A function on set of vertices that returns the set of edges with exactly one end in the set.
- `IsEdgeCut`: A predicate for set of edges that promises it is `edgeCut` of some set.
- `IsBridge`: An edge `e` is a bridge iff it is a singleton edge cut.
- `IsBond`: An edge Set `B` is bond iff it is minimal nonempty edge cut.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #35879
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
209/0 |
Mathlib/Combinatorics/Graph/Connected/EdgeCut.Lean,Mathlib/Combinatorics/Graph/Subgraph.lean,docs/references.bib |
3 |
12 |
['Jun2M', 'b-mehta', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
none |
11-49711 11 days ago |
32-58169 32 days ago |
89-56090 89 days |
| 41607 |
mbkybky author:mbkybky |
chore(RingTheory/DedekindDomain): update definitions |
Update [IsDedekindRing](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/DedekindDomain/Basic.html#IsDedekindRing) and [IsDedekindDomainDvr](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/DedekindDomain/Dvr.html#IsDedekindDomainDvr) to extend `IsNoetherianRing A` instead of `IsNoetherian A A`, bringing their definitions closer to the usual mathematical formulations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
2/2 |
Mathlib/RingTheory/DedekindDomain/Basic.lean,Mathlib/RingTheory/DedekindDomain/Dvr.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
11-44572 11 days ago |
11-45444 11 days ago |
11-44909 11 days |
| 41609 |
SnirBroshi author:SnirBroshi |
feat(Data/List/Dedup): `dedup` and `Nodup` lemmas |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
16/0 |
Mathlib/Data/Finset/Card.lean,Mathlib/Data/Finset/Dedup.lean,Mathlib/Data/List/Dedup.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
11-36898 11 days ago |
11-39713 11 days ago |
11-39178 11 days |
| 41476 |
SnirBroshi author:SnirBroshi |
feat(SetTheory/Cardinal/NatCard): length of a nodup list whose elements come from a set |
For a list `l` with `l.Nodup` and a set `s` with `∀ a ∈ l, a ∈ s` we have `l.length ≤ s.encard`,
and similar statements for `Finset`/`Multiset` with `Set.encard`/`Set.ncard`/`ENat.card`/`Nat.card`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory |
82/12 |
Mathlib/Data/Finset/Dedup.lean,Mathlib/SetTheory/Cardinal/NatCard.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
11-36740 11 days ago |
14-45173 14 days ago |
14-44638 14 days |
| 41617 |
joelriou author:joelriou |
feat(Order/Fin): conditions for `Fin.insertNth` to be monotone or strictly monotone |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
102/0 |
Mathlib.lean,Mathlib/Order/Fin/InsertNth.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
11-8198 11 days ago |
11-8774 11 days ago |
11-8239 11 days |
| 40865 |
TJHeeringa author:TJHeeringa |
refactor(Algebra/Module/Equiv): update name and refactor API ofLinearEquiv |
Change the name of `LinearEquiv.ofLinear` to `LinearEquiv.ofLinearMap` and change the API. This replaces `_apply` by `coe_`, introduces `_symm`, which makes `_symm_apply` and `_symm_toLinearMap` redundant, and changes `_toLinearMap` to `toLinearMap_`.
---
This PR is as discussed in https://github.com/leanprover-community/mathlib4/pull/40841#discussion_r3448504317 and https://github.com/leanprover-community/mathlib4/pull/40841#issuecomment-4762175719.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
114/97 |
Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Semi.lean,Mathlib/Algebra/Colimit/Module.lean,Mathlib/Algebra/Module/CharacterModule.lean,Mathlib/Algebra/Module/Equiv/Basic.lean,Mathlib/Algebra/Module/Presentation/Basic.lean,Mathlib/Algebra/Star/Module.lean,Mathlib/Analysis/Normed/Operator/LinearIsometry.lean,Mathlib/LinearAlgebra/Contraction.lean,Mathlib/LinearAlgebra/DirectSum/TensorProduct.lean,Mathlib/LinearAlgebra/Dual/Lemmas.lean,Mathlib/LinearAlgebra/ExteriorPower/Basic.lean,Mathlib/LinearAlgebra/Finsupp/LinearCombination.lean,Mathlib/LinearAlgebra/Matrix/SpecialLinearGroup.lean,Mathlib/LinearAlgebra/Multilinear/DFinsupp.lean,Mathlib/LinearAlgebra/Pi.lean,Mathlib/LinearAlgebra/PiTensorProduct/Basic.lean,Mathlib/LinearAlgebra/PiTensorProduct/DFinsupp.lean,Mathlib/LinearAlgebra/PiTensorProduct/Dual.lean,Mathlib/LinearAlgebra/Projection.lean,Mathlib/LinearAlgebra/Quotient/Basic.lean,Mathlib/LinearAlgebra/TensorProduct/Associator.lean,Mathlib/LinearAlgebra/TensorProduct/Basic.lean,Mathlib/LinearAlgebra/TensorProduct/DirectLimit.lean,Mathlib/LinearAlgebra/TensorProduct/Graded/External.lean,Mathlib/LinearAlgebra/TensorProduct/Map.lean,Mathlib/LinearAlgebra/TensorProduct/Pi.lean,Mathlib/LinearAlgebra/TensorProduct/Prod.lean,Mathlib/LinearAlgebra/TensorProduct/Quotient.lean,Mathlib/LinearAlgebra/TensorProduct/Subalgebra.lean,Mathlib/LinearAlgebra/TensorProduct/Submodule.lean,Mathlib/LinearAlgebra/TensorProduct/Tower.lean,Mathlib/LinearAlgebra/Trace.lean,Mathlib/RepresentationTheory/Coinvariants.lean,Mathlib/RepresentationTheory/FiniteIndex.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/LowDegree.lean,Mathlib/RingTheory/AdicCompletion/AsTensorProduct.lean,Mathlib/RingTheory/AdicCompletion/Functoriality.lean,Mathlib/RingTheory/Extension/Cotangent/Basis.lean,Mathlib/RingTheory/Flat/Equalizer.lean,Mathlib/RingTheory/IsTensorProduct.lean,Mathlib/RingTheory/Localization/Module.lean,Mathlib/RingTheory/MatrixAlgebra.lean,Mathlib/RingTheory/PicardGroup.lean |
44 |
24 |
['TJHeeringa', 'github-actions', 'j-loreaux', 'mathlib-bors', 'mathlib-merge-conflicts', 'themathqueen'] |
nobody |
1 |
10-66367 10 days ago |
11-6830 11 days ago |
25-49952 25 days |
| 41557 |
lakesare author:lakesare |
feat(Analysis/Convolution): add convolution_symm, convolution, (3 more lemmas) |
**Upstreaming from Carleson: [/Carleson/ToMathlib/Analysis/Convolution.lean](https://github.com/fpvandoorn/carleson/blob/master/Carleson/ToMathlib/Analysis/Convolution.lean)**
___
### Upstreamed theorems
- **theorem convolution_symm**
- renamed `g` to `f'` (to reuse the existing section variable)
- **theorem AEStronglyMeasurable.convolution** (refactored)
- **lemma lintegral_enorm_convolution_integrand_le_eLpNorm_mul_eLpNorm** (refactored)
- removed the comment _"This implies both of the following theorems convolutionExists_of_memLp_memLp and enorm_convolution_le_eLpNorm_mul_eLpNorm."_, because the comment would create an impression that it's an auxiliary lemma that shouldn't be used on its own
- **theorem ConvolutionExists.of_memLp_memLp** (slightly refactored)
- `(hf : AEStronglyMeasurable f μ)` and `(hg : AEStronglyMeasurable g μ)` were removed, because we can derive those hypotheses from `hfp.aestronglyMeasurable` and `hgq.aestronglyMeasurable` respectively (which we did during refactoring)
- **theorem enorm_convolution_le_eLpNorm_mul_eLpNorm**
___
- **lemma lintegral_enorm_convolution_integrand_le_eLpNorm_mul_eLpNorm,
theorem ConvolutionExists.of_memLp_memLp,
theorem enorm_convolution_le_eLpNorm_mul_eLpNorm**
- turned `(hpq : p.HolderConjugate q)` into an instance implicit `[hpq : p.HolderConjugate q]` (there does exist a `class HolderConjugate` for ENNReals, so mathlib seems to use instance implicits in such cases, like e.g. [here](https://github.com/leanprover-community/mathlib4/blob/79aee35d9696d759b73eed71d7dde666750bc35e/Mathlib/Analysis/Normed/Lp/lpHolder.lean#L262))
- **theorem AEStronglyMeasurable.convolution,
lemma lintegral_enorm_convolution_integrand_le_eLpNorm_mul_eLpNorm,
theorem ConvolutionExists.of_memLp_memLp,
theorem enorm_convolution_le_eLpNorm_mul_eLpNorm**
- `L` was implicit, now became explicit (to comply with existing section variables)
- changed `[SigmaFinite μ]` to `[SFinite μ]` (because it's a weaker requirement [/Mathlib/MeasureTheory/Measure/Typeclasses/SFinite.lean#L191](https://github.com/leanprover-community/mathlib4/blob/9ef14c7b82f8a45f8dfc03dace26d6bb25023bac/Mathlib/MeasureTheory/Measure/Typeclasses/SFinite.lean#L191))
|
carleson
t-analysis
new-contributor
|
58/5 |
Mathlib/Analysis/Convolution.lean |
1 |
5 |
['github-actions', 'lakesare'] |
nobody |
none |
10-43345 10 days ago |
10-45326 10 days ago |
10-44949 10 days |
| 41629 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Subgraph): `neighborSet` of `coe`/`spanningCoe` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/3 |
Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
10-42646 10 days ago |
10-43215 10 days ago |
10-42680 10 days |
| 41632 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Trails): the support of an Eulerian trail equals the support of the graph |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
32/0 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Trails.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
10-34417 10 days ago |
10-35002 10 days ago |
10-34467 10 days |
| 41633 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): length of closed a walk/trail isn't `1`/`2` |
For a closed walk `p`:
- `p.length ≠ 1`
- `p.IsTrail` → `p.length ≠ 2`
- `p.IsTrail` → `p.length ≤ 2` → `p.Nil`
---
Since a circuit is a closed non-nil trail, `IsTrail.nil_of_length_le_two` is basically the contrapositive of `IsCircuit.three_le_length`, but I think this form is useful.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
11/4 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
10-32418 10 days ago |
10-33070 10 days ago |
10-32535 10 days |
| 41081 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add Subrepresentation.toRepresentation_apply and Subrepresentation.quotient |
Add a lemma for Subrepresentation recording the inherited group action. Help avoid unfold Subrepresentation.toRepresentation.
Add the quotient representation associated to a subrepresentaiton. It wraps up Representation.quotient and Representation.Subrepresentation. Help avoid writing down explicitly the stability condition required in Representation.quotient.
|
t-algebra
new-contributor
label:t-algebra$ |
26/0 |
Mathlib/RepresentationTheory/Subrepresentation.lean |
1 |
17 |
['JX-Mo', 'Whysoserioushah', 'github-actions'] |
nobody |
1 |
10-28832 10 days ago |
10-29439 10 days ago |
25-84873 25 days |
| 41613 |
WenrongZou author:WenrongZou |
feat(ModularForm): add eisensteinSeries G_k^v |
This PR add the Eisenstein series $G_k^{\bar{v}}$, and prove it as a sum of Eisenstein series $E_k^{\bar{v}}$.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import |
179/0 |
Mathlib/Data/ZMod/Basic.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/Basic.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/Defs.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/IsBoundedAtImInfty.lean |
4 |
2 |
['github-actions', 'mathlib-bors'] |
nobody |
none |
10-22866 10 days ago |
10-22866 10 days ago |
10-25552 10 days |
| 41635 |
grunweg author:grunweg |
chore: golf proof of smoothness of immersions and submersions |
The current proof of `Is{Immersion,Submersion}AtOfComplement.contMDiffOn` is slightly longer because two lemmas expect (mathematically equivalent, but incompatible) models with corners.
Side-step this by passing to the normed space setting at first, where this issue does not arise.
Pointed out by kim-em using Claude code.
While at it, also golf one proof using `fun_prop`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
4/20 |
Mathlib/Geometry/Manifold/Immersion.lean,Mathlib/Geometry/Manifold/Submersion.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
10-17223 10 days ago |
10-17897 10 days ago |
10-17362 10 days |
| 41618 |
joelriou author:joelriou |
chore(Order/Relseries): cleaning up a proof |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
14/45 |
Mathlib/Order/RelSeries.lean |
1 |
3 |
['chenson2018', 'github-actions'] |
nobody |
none |
10-1027 10 days ago |
10-2779 10 days ago |
11-7288 11 days |
| 41641 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in GroupTheory |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 17 file(s) in **GroupTheory**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-group-theory
|
68/33 |
Mathlib/GroupTheory/Congruence/Hom.lean,Mathlib/GroupTheory/Coset/Defs.lean,Mathlib/GroupTheory/CosetCover.lean,Mathlib/GroupTheory/Exponent.lean,Mathlib/GroupTheory/FinitelyPresentedGroup.lean,Mathlib/GroupTheory/FreeGroup/Basic.lean,Mathlib/GroupTheory/MonoidLocalization/Lemmas.lean,Mathlib/GroupTheory/Nilpotent.lean,Mathlib/GroupTheory/NoncommPiCoprod.lean,Mathlib/GroupTheory/OreLocalization/Basic.lean,Mathlib/GroupTheory/OreLocalization/OreSet.lean,Mathlib/GroupTheory/Perm/Cycle/Type.lean,Mathlib/GroupTheory/QuotientGroup/Defs.lean,Mathlib/GroupTheory/ResiduallyFinite.lean,Mathlib/GroupTheory/SpecificGroups/Cyclic.lean,Mathlib/GroupTheory/SpecificGroups/KleinFour.lean,Mathlib/GroupTheory/Submonoid/Center.lean |
17 |
1 |
['github-actions'] |
nobody |
none |
10-500 10 days ago |
10-500 9 days ago |
9-86365 9 days |
| 41426 |
gmcninch-prof author:gmcninch-prof |
Add SymmetricMap: symmetric multilinear maps |
Define `SymmetricMap R M N ι`, the type of symmetric `R`-multilinear maps
from `ι → M` to `N` (i.e. multilinear maps invariant under permutation of
their arguments).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
The code is adapted from Kenny Lau's work
[here](https://github.com/kckennylau/EllipticCurve/blob/master/EllipticCurve/ProjectiveSpace/TensorProduct/SymmetricMap.lean)
-- see [`SymmetricMap`](https://github.com/gmcninch-prof/mathlib4/blob/symmetric-power-lift/Mathlib/LinearAlgebra/TensorProduct/SymmetricMap.lean).
This PR previously also contained the universal property / `lift` for
`SymmetricPower` (relating linear maps out of `Sym[R]^n M` to symmetric
multilinear maps), but per reviewer feedback on Zulip that work has been
split into a separate PR that depends on this one.
Zulip discussion [here](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/SymmetricPower.20universal.20property/near/608532652)
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
397/0 |
Mathlib.lean,Mathlib/LinearAlgebra/TensorProduct/SymmetricMap.lean |
2 |
10 |
['github-actions', 'gmcninch-prof', 'jcommelin'] |
nobody |
none |
9-68459 9 days ago |
9-68459 9 days ago |
11-36226 11 days |
| 41659 |
NoahW314 author:NoahW314 |
feat(Algebra/Order/GroupWithZero): generalize from `MonoidWithZero` to `MulZeroClass` |
The same proofs hold with the weaker typeclass.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
37/49 |
Mathlib/Algebra/Order/GroupWithZero/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
9-61189 9 days ago |
9-63716 9 days ago |
9-63181 9 days |
| 41308 |
sergantche author:sergantche |
feat: add `List.insertIdx_eraseIdx_getElem_perm` |
Adds `List.insertIdx_eraseIdx_getElem_perm`, showing that erasing an element by index and inserting it at any valid position gives a permutation of the original list.
This packages the existing lemmas `List.perm_insertIdx` and `List.getElem_cons_eraseIdx_perm` into a direct API lemma.
AI assistance was used in preparing this PR; I reviewed the statement and proof.
[](https://gitpod.io/from-referrer/) |
t-data
new-contributor
|
5/0 |
Mathlib/Data/List/Perm/Basic.lean |
1 |
4 |
['github-actions', 'sergantche', 'vlad902'] |
nobody |
1 |
9-57643 9 days ago |
9-60486 9 days ago |
13-63346 13 days |
| 38908 |
CBirkbeck author:CBirkbeck |
feat(NumberTheory/ModularForms): API lemmas for level-1 graded ring |
Adds API lemmas extracted from #38813 to keep that PR reviewable: `DirectSum.of_eq_of_eq`, `DirectSum.of_eq_sub_add_smul`, `ModularForm.cast_apply`, `ModularForm.mul_ne_zero`, `ModularForm.sub_smul_isCuspForm`. |
LLM-generated |
28/0 |
Mathlib/NumberTheory/ModularForms/Basic.lean,Mathlib/NumberTheory/ModularForms/CuspFormSubmodule.lean,Mathlib/NumberTheory/ModularForms/QExpansion.lean |
3 |
7 |
['CBirkbeck', 'github-actions', 'mathlib-merge-conflicts', 'riccardobrasca'] |
nobody |
none |
9-30164 9 days ago |
9-30706 9 days ago |
9-30171 9 days |
| 38909 |
CBirkbeck author:CBirkbeck |
feat(RingTheory/MvPolynomial/WeightedHomogeneous): sub, eq_zero_of_no_monomials, eq_monomial_of_unique_weight |
Adds the general-purpose API lemmas extracted from #38813 to keep that PR reviewable: `MvPolynomial.IsWeightedHomogeneous.sub`, `MvPolynomial.eq_zero_of_no_monomials`, `MvPolynomial.eq_monomial_of_unique_weight`, `MvPolynomial.monomial_fin_two`, `MvPolynomial.support_sub_monomial_sub_monomial`, `Finsupp.weight_eq_sum`, and the Finset inequality `Finset.sum_lt_sum_of_replace` (no mathlib equivalent exists — `prod_lt_prod_of_subset`-style lemmas need `s ⊆ t`).
_Prepared by Claude._
|
LLM-generated |
86/0 |
Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/Data/Finsupp/Weight.lean,Mathlib/RingTheory/MvPolynomial/WeightedHomogeneous.lean |
5 |
5 |
['CBirkbeck', 'github-actions', 'riccardobrasca'] |
nobody |
none |
9-27758 9 days ago |
9-30530 9 days ago |
9-29995 9 days |
| 41639 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in MeasureTheory.Group |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 3 file(s) in **MeasureTheory.Group**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-measure-probability
|
41/16 |
Mathlib/MeasureTheory/Group/Arithmetic.lean,Mathlib/MeasureTheory/Group/FundamentalDomain.lean,Mathlib/MeasureTheory/Group/Measure.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
9-22078 9 days ago |
10-11155 10 days ago |
10-10620 10 days |
| 41640 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in GroupTheory.GroupAction |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 6 file(s) in **GroupTheory.GroupAction**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-group-theory
|
50/28 |
Mathlib/GroupTheory/GroupAction/Blocks.lean,Mathlib/GroupTheory/GroupAction/FixingSubgroup.lean,Mathlib/GroupTheory/GroupAction/Hom.lean,Mathlib/GroupTheory/GroupAction/MultipleTransitivity.lean,Mathlib/GroupTheory/GroupAction/Pointwise.lean,Mathlib/GroupTheory/GroupAction/SubMulAction.lean |
6 |
1 |
['github-actions'] |
nobody |
none |
9-20603 9 days ago |
10-1204 10 days ago |
10-669 10 days |
| 41644 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Algebra (BigOperators, Order, ...) |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 16 file(s) in **Algebra (BigOperators, Order, ...)**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated |
68/40 |
Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/BigOperators/Group/Finset/Defs.lean,Mathlib/Algebra/BigOperators/Group/Finset/Piecewise.lean,Mathlib/Algebra/BigOperators/Group/Finset/Sigma.lean,Mathlib/Algebra/FreeMonoid/Basic.lean,Mathlib/Algebra/Module/PUnit.lean,Mathlib/Algebra/MonoidAlgebra/Module.lean,Mathlib/Algebra/Order/Antidiag/Prod.lean,Mathlib/Algebra/Order/Group/Finset.lean,Mathlib/Algebra/Order/Group/Unbundled/Basic.lean,Mathlib/Algebra/Order/Hom/Monoid.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Pow.lean,Mathlib/Algebra/Regular/Basic.lean,Mathlib/Algebra/Torsor/Basic.lean,Mathlib/Order/Filter/AtTopBot/Monoid.lean |
16 |
1 |
['github-actions'] |
nobody |
none |
9-9801 9 days ago |
9-12468 9 days ago |
9-11933 9 days |
| 38214 |
emlis42 author:emlis42 |
feat(Algebra/ContinuedFractions): add Euler's continued fraction |
This PR formalizes Euler continued fractions by providing `euler` which construct one by giving head term and coefficients with some basic property.
We also introduce a transformation `GenContFract.toEuler` that maps a generalized continued fraction `g : GenContFract K` to an equivalent Euler continued fraction. |
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
364/0 |
Mathlib.lean,Mathlib/Algebra/ContinuedFractions/Euler.lean |
2 |
74 |
['YaelDillies', 'emlis42', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
1 |
9-8693 9 days ago |
14-78427 14 days ago |
77-41975 77 days |
| 41678 |
JX-Mo author:JX-Mo |
refactor(RepresentationTheory): record the concrete binary biproduct |
Record the concrete binary biproduct explicitly from the instance HasBinaryBiproducts to make it reusable.
|
t-algebra
new-contributor
label:t-algebra$ |
23/7 |
Mathlib/RepresentationTheory/Rep/Basic.lean |
1 |
7 |
['JX-Mo', 'Whysoserioushah', 'github-actions'] |
nobody |
none |
9-3404 9 days ago |
9-13095 9 days ago |
9-12580 9 days |
| 41645 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Combinatorics and Dynamics |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 5 file(s) in **Combinatorics and Dynamics**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated |
22/9 |
Mathlib/Combinatorics/Additive/FreimanHom.lean,Mathlib/Combinatorics/Hindman.lean,Mathlib/Combinatorics/SimpleGraph/Cayley.lean,Mathlib/Data/Finset/NoncommProd.lean,Mathlib/Dynamics/SymbolicDynamics/Basic.lean |
5 |
3 |
['b-mehta', 'github-actions'] |
nobody |
1 |
8-83557 8 days ago |
9-925 9 days ago |
9-2231 9 days |
| 40692 |
pechersky author:pechersky |
feat(GroupTheory/Finite): torsion free and FG WithOne M is when M is |
Couldn't find a better place for these
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [ ] depends on #40690 |
t-group-theory |
62/3 |
Mathlib/Algebra/Group/Hom/Defs.lean,Mathlib/Algebra/Group/Nat/Hom.lean,Mathlib/Algebra/Group/WithOne/Basic.lean,Mathlib/GroupTheory/MonoidLocalization/Finite.lean |
4 |
2 |
['github-actions'] |
nobody |
none |
8-69252 8 days ago |
8-72735 8 days ago |
8-76886 8 days |
| 41597 |
NoahW314 author:NoahW314 |
feat(Data/Finset/Card): add `Finset.card_le_card_of_surjective` |
This is modeled on the corresponding lemma `Finset.card_le_card_of_injective`, which already exists.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
9/0 |
Mathlib/Data/Finset/Card.lean |
1 |
2 |
['github-actions', 'themathqueen'] |
nobody |
none |
8-63777 8 days ago |
11-74193 11 days ago |
11-73658 11 days |
| 41654 |
adomani author:adomani |
chore: rename `QuotientAddGroup.mk_out_eq_mul` to `mk_out_eq_add` |
The additive lemma states `(mk g).out = g + h`, so by the `to_additive` naming convention its name should end in `add`, not `mul`. Renames it to `QuotientAddGroup.mk_out_eq_add` (a copy-paste error inherited from mathlib3) and deprecates the old name. |
LLM-generated
t-group-theory
|
4/1 |
Mathlib/GroupTheory/Coset/Defs.lean |
1 |
2 |
['adomani', 'github-actions'] |
nobody |
none |
8-62377 8 days ago |
8-64760 8 days ago |
8-65783 8 days |
| 40689 |
pechersky author:pechersky |
feat(Algebra/Group/WithOne): isFooCancel when source is |
requires that source has no idempotent elements
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
37/0 |
Mathlib/Algebra/Group/WithOne/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
8-62249 8 days ago |
35-44001 35 days ago |
35-43477 35 days |
| 41710 |
WenrongZou author:WenrongZou |
feat(FormalGroup): generalize the definition of `FormalGroup.Point` |
This PR generalizes the definition of the point of formal group. This will fit into more cases of applications.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
120/75 |
Mathlib/RingTheory/FormalGroup/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
8-60992 8 days ago |
8-62077 8 days ago |
8-61542 8 days |
| 41637 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Algebra/Group core and subobjects |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 13 file(s) in **Algebra/Group core and subobjects**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-algebra
label:t-algebra$ |
70/24 |
Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Center.lean,Mathlib/Algebra/Group/Commute/Defs.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Group/Subgroup/Basic.lean,Mathlib/Algebra/Group/Subgroup/Ker.lean,Mathlib/Algebra/Group/Subgroup/MulOppositeLemmas.lean,Mathlib/Algebra/Group/Submonoid/Membership.lean,Mathlib/Algebra/Group/Submonoid/MulAction.lean,Mathlib/Algebra/Group/Subsemigroup/Membership.lean,Mathlib/Algebra/Group/Torsion.lean,Mathlib/Algebra/Group/UniqueProds/Basic.lean |
13 |
11 |
['adomani', 'artie2000', 'github-actions'] |
nobody |
none |
8-60520 8 days ago |
10-12596 10 days ago |
10-12061 10 days |
| 41636 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Algebra/Group actions and homs |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 7 file(s) in **Algebra/Group actions and homs**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-algebra
label:t-algebra$ |
60/21 |
Mathlib/Algebra/Group/Action/Defs.lean,Mathlib/Algebra/Group/Action/Faithful.lean,Mathlib/Algebra/Group/Action/Hom.lean,Mathlib/Algebra/Group/Action/Units.lean,Mathlib/Algebra/Group/Equiv/Defs.lean,Mathlib/Algebra/Group/Hom/Defs.lean,Mathlib/Algebra/Group/Units/Hom.lean |
7 |
14 |
['JovanGerb', 'adomani', 'artie2000', 'github-actions'] |
nobody |
none |
8-60209 8 days ago |
9-13054 9 days ago |
10-12385 10 days |
| 41713 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Finite): the `Fintype` instance for `incidenceSet` doesn't need `DecidableEq` |
Now it only requires `Fintype (G.neighborSet v)`.
This caused `incidenceFinset` and theorems about it to complain that `DecidableEq` is unused, so I changed `incidenceFinset` to require `Fintype (G.incidenceSet v)` and fixed the theorems. Theorems that require a finite `neighborSet` can avoid this.
---
The theorem below it also doesn't need `DecidableEq` anymore.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/10 |
Mathlib/Combinatorics/SimpleGraph/Finite.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
8-43822 8 days ago |
8-44396 8 days ago |
8-44396 8 days |
| 41668 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Decomp): `dropUntil` API to match existing `takeUntil` API |
---
Slightly more complicated theorems than usual "API" though.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
56/9 |
Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
8-39273 8 days ago |
8-39841 8 days ago |
9-43596 9 days |
| 41460 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Walk/Operations): more operations API |
---
Moved `support_tail_of_not_nil` up because `reverse_dropLast` uses it as a `simp` lemma.
Tagged it with `simp` makes `cons_support_tail` work `by simp`, so I also untagged `cons_support_tail`.
You may wonder whether we need `mapLe` API if it's an `abbrev` for `map`; the answer is you can't `rw`/`simp` goals with `mapLe` using `map` API because these tactics do not unfold the `Hom.ofLE` (and then `id`) applications in the endpoints of the walk, since it isn't reducible (even though `mapLe` itself is). The definition of `mapLe` is actually an `abbrev` plus a non-reducibly defeq type change.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
tech debt
|
86/15 |
Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Operations.lean |
3 |
5 |
['SnirBroshi', 'github-actions', 'vlad902'] |
nobody |
none |
8-32622 8 days ago |
14-47500 14 days ago |
14-48842 14 days |
| 41435 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Hamiltonian): a graph with a Hamiltonian path is connected |
and other small Hamiltonian lemmas.
---
The new public import is needed because `Nat.card` was previously only imported privately.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
87/18 |
Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
8-26617 8 days ago |
13-27344 13 days ago |
15-45268 15 days |
| 41722 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Connectivity/Subgraph): `mapToSubgraph` API |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
36/0 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
8-25186 8 days ago |
8-25792 8 days ago |
8-25257 8 days |
| 41446 |
YaelDillies author:YaelDillies |
chore: add missing `noncomputable` |
All these definitions are noncomputable (because they use choice/produce sets), but the computability checker doesn't spot this until I try making `Set` a one-field structure. This is because the computability checker doesn't even try to compute sorts, but it doesn't see that `s : Set α` is (equivalent to) a family of sorts.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
92/81 |
Mathlib/Algebra/Homology/EulerCharacteristic.lean,Mathlib/Analysis/SpecialFunctions/Complex/Circle.lean,Mathlib/CategoryTheory/Presentable/SharplyLT/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Partition.lean,Mathlib/Data/Real/Embedding.lean,Mathlib/Data/Set/MemPartition.lean,Mathlib/Geometry/Euclidean/Sphere/Tangent.lean,Mathlib/GroupTheory/Commutator/Basic.lean,Mathlib/GroupTheory/Complement.lean,Mathlib/GroupTheory/DoubleCoset.lean,Mathlib/GroupTheory/GroupAction/Defs.lean,Mathlib/GroupTheory/SchurZassenhaus.lean,Mathlib/GroupTheory/Transfer.lean,Mathlib/LinearAlgebra/Basis/Flag.lean,Mathlib/LinearAlgebra/Basis/VectorSpace.lean,Mathlib/LinearAlgebra/StdBasis.lean,Mathlib/MeasureTheory/Constructions/ClosedCompactCylinders.lean,Mathlib/MeasureTheory/Constructions/Cylinders.lean,Mathlib/MeasureTheory/Covering/VitaliFamily.lean,Mathlib/MeasureTheory/Function/AEMeasurableSequence.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/AEStronglyMeasurable.lean,Mathlib/MeasureTheory/MeasurableSpace/CountablyGenerated.lean,Mathlib/MeasureTheory/Measure/Decomposition/Exhaustion.lean,Mathlib/MeasureTheory/Measure/Decomposition/Lebesgue.lean,Mathlib/MeasureTheory/Measure/MutuallySingular.lean,Mathlib/MeasureTheory/Measure/Typeclasses/Finite.lean,Mathlib/MeasureTheory/Measure/Typeclasses/SFinite.lean,Mathlib/ModelTheory/Algebra/Field/CharP.lean,Mathlib/ModelTheory/Algebra/Field/IsAlgClosed.lean,Mathlib/NumberTheory/LSeries/ZetaZeros.lean,Mathlib/NumberTheory/NumberField/CanonicalEmbedding/ConvexBody.lean,Mathlib/NumberTheory/NumberField/CanonicalEmbedding/NormLeOne.lean,Mathlib/Order/Interval/Set/OrdConnectedComponent.lean,Mathlib/Order/Preorder/Chain.lean,Mathlib/Probability/Process/PartitionFiltration.lean,Mathlib/RingTheory/Extension/Presentation/Core.lean,Mathlib/RingTheory/FractionalIdeal/Extended.lean,Mathlib/RingTheory/Polynomial/ContentIdeal.lean,Mathlib/RingTheory/Smooth/NoetherianDescent.lean,Mathlib/Topology/Category/Profinite/Nobeling/Successor.lean,Mathlib/Topology/Category/Profinite/Nobeling/ZeroLimit.lean,Mathlib/Topology/Compactness/SigmaCompact.lean,Mathlib/Topology/Connected/Basic.lean,Mathlib/Topology/Instances/CantorSet.lean,Mathlib/Topology/Irreducible.lean,Mathlib/Topology/UrysohnsLemma.lean |
46 |
7 |
['JovanGerb', 'YaelDillies', 'github-actions', 'kbuzzard', 'leanprover-radar', 'thorimur'] |
nobody |
none |
8-19955 8 days ago |
14-86113 14 days ago |
15-249 15 days |
| 41082 |
wrenna-robson author:wrenna-robson |
feat(Logic/Function/Defs): add `Function.diag` |
Adds a name for the function `fun x => (x, x)`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
82/50 |
Mathlib/Data/Finset/Prod.lean,Mathlib/Data/Int/Cast/Prod.lean,Mathlib/Data/Nat/Cast/Prod.lean,Mathlib/Data/Set/Prod.lean,Mathlib/Logic/Function/Defs.lean,Mathlib/MeasureTheory/MeasurableSpace/Constructions.lean,Mathlib/NumberTheory/Height/Basic.lean,Mathlib/Order/Filter/Prod.lean,Mathlib/Probability/Independence/Conditional.lean,Mathlib/Probability/Kernel/Basic.lean,Mathlib/Probability/Kernel/Composition/MeasureComp.lean,Mathlib/Probability/Kernel/Composition/MeasureCompProd.lean,Mathlib/Probability/Kernel/Condexp.lean,Mathlib/Probability/Kernel/Deterministic.lean,Mathlib/Probability/Moments/SubGaussian.lean,Mathlib/Topology/Algebra/ProperAction/Basic.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Constructions/SumProd.lean,Mathlib/Topology/UniformSpace/UniformConvergence.lean |
19 |
31 |
['github-actions', 'themathqueen', 'wrenna-robson'] |
nobody |
1 |
8-17360 8 days ago |
8-20618 8 days ago |
21-9773 21 days |
| 28686 |
mitchell-horner author:mitchell-horner |
feat(Combinatorics/SimpleGraph): prove the Erdős-Stone theorem |
Proves the Erdős-Stone theorem:
If `G` has at least `(1 - 1 / r + o(1)) * n ^ 2 / 2` many edges, then `G` contains a copy of a `completeEquipartiteGraph (r + 1) t`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #28685
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
|
205/1 |
Mathlib/Combinatorics/SimpleGraph/Extremal/ErdosStoneSimonovits.lean |
1 |
8 |
['barni120400', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'mitchell-horner'] |
nobody |
none |
8-10905 8 days ago |
19-3798 19 days ago |
19-12342 19 days |
| 41709 |
metakunt author:metakunt |
feat(Data/Multiset): change definition of Multiset.Pairwise |
Currently the definition of Multiset.Pairwise seems not right to me. For my project I need to get a decidable instance for a Finset.Pairwise, but the current definition doesn't seem correct and it can't even give me a decidable instance of Pairwise. |
t-data
large-import
|
71/60 |
Mathlib/Data/Finsupp/BigOperators.lean,Mathlib/Data/Fintype/List.lean,Mathlib/Data/Multiset/Bind.lean,Mathlib/Data/Multiset/Defs.lean,Mathlib/Data/Multiset/Pairwise.lean,Mathlib/Data/Multiset/Replicate.lean,Mathlib/Data/Multiset/ZeroCons.lean,Mathlib/Logic/Relation.lean |
8 |
13 |
['SnirBroshi', 'github-actions', 'metakunt'] |
nobody |
none |
8-3231 8 days ago |
8-3231 8 days ago |
8-2707 8 days |
| 40741 |
AntoineduFresne author:AntoineduFresne |
feat(order): dilworth's and mirsky's theorems for finite orders |
I add Dilworth's theorem and its order dual, Mirsky's theorem, for finite subsets of a partial order, together with the order-theoretic lemmas they rest on.
A prior external formalization by Vlad Tsyrklevich is linked from `1000.yaml`; this is an independent `Finset`-based development using Galvin's proof, and I agreed the `1000.yaml` update with him.
I split the min-max content, as for Hall's marriage theorem, into a weak-duality inequality and a strong-duality existence of a matching pair, so I never define an extremal quantity over families of sets (no `Finset.min'` / `Finset.max'`):
- `dilworth` / `mirsky` — an antichain and a chain cover (resp. a chain and an antichain cover) of equal size;
- `antichain_le_chain_cover` / `chain_le_antichain_cover` — the weak-duality inequalities, for an arbitrary relation;
- `dilworth_partition` / `mirsky_partition` — the same with a pairwise-disjoint partition.
For Dilworth I use Galvin's induction (gluing step `chainCover_glue`); I avoid the König /
bipartite-matching route since König isn't in Mathlib yet (at least last time I checked). I prove Mirsky directly (peeling off minimal elements) rather than via `OrderDual`, since the direct induction seems simpler to me and the two proofs already share their foundations (the closure lemmas and the injective weak dualities).
Internally I work with an injection `f : α → Finset α` on the antichain rather than with the
`Finset (Finset α)` cover directly, so distinctness of the chains comes from the antichain property instead of a separate bookkeeping.
## Questions I'd like input on
1. Explicit min-max? I give weak duality plus a matching pair, from which "largest antichain = smallest chain cover" follows; I do not state that equality as a single theorem (doing so would, I think, mean defining the extremal quantities I wanted to avoid). Would you also like an explicit min-max statement?
2. Two layers of weak duality. I expose it twice: an injective form (`IsAntichain.exists_injOn_mem_chains`, over an arbitrary relation and an arbitrary index type, no finiteness) and a `Finset` cardinality form (`antichain_le_chain_cover`), the latter a one-line specialization of the former. I'm not sure whether exposing both is right, or whether one of them should be canonical. And is there appetite to push the general core to an `ℕ∞` / infinite version, or is the finite form the right scope here?
3. `[DecidableEq α]` on the main theorems. It comes only from writing the cover as
`s = 𝒞.biUnion id` (`Finset.biUnion` needs it); a membership-form coverage condition such as `∀ x, x ∈ s ↔ ∃ C ∈ 𝒞, x ∈ C` would drop the assumption, though it seems to me a bit less readable. Which do you prefer? (I think the injective-form weak dualities assume neither order, finiteness, nor `DecidableEq`.)
4. Naming. I use `C` / `A` for a chain / antichain and `𝒞` / `𝒜` for a chain / antichain cover (for hopefully obvious reason). Happy to change these if you would prefer something else.
## Open questions
- File placement (`Mathlib/Order/Dilworth.lean`?), and whether the general lemmas (the antichain closures, the injective transversal and weak dualities) should live in existing files (`Mathlib/Order/Antichain.lean`, `Mathlib/Order/UpperLower/…`) rather than in a new file.
Zulip: https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Antoine.20du.20Fresne.20von.20Hohenesche/with/604112426
AI use: I worked out all proofs on paper first and most of the design structure of the file. I then used Claude Code (Claude Opus) to transcribe my paper proofs into Lean, weaken hypotheses, reduce redundancy, and fix comment typos. |
t-order
new-contributor
LLM-generated
|
610/3 |
Mathlib.lean,Mathlib/Order/Dilworth.lean,docs/1000.yaml |
3 |
6 |
['AntoineduFresne', 'SnirBroshi', 'github-actions'] |
nobody |
none |
7-86266 7 days ago |
34-28589 34 days ago |
34-29216 34 days |
| 41737 |
jjdishere author:jjdishere |
feat(CategoryTheory/AB5): AB5 instance of Ab with universe variables |
When u <= v <= w, we show `AB5OfSize.{u, v} Ab.{w}`.
(Only `AB5OfSize.{u, u + 1} Ab.{u + 1}` is need in my further application.)
Co-authored-by: @chrisflav
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
13/1 |
Mathlib/Algebra/Category/Grp/AB.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
7-86088 7 days ago |
8-264 7 days ago |
7-86129 7 days |
| 41415 |
tb65536 author:tb65536 |
feat(FieldTheory/AbsoluteGaloisGroup): functoriality of `absoluteGaloisGroup` |
This PR proves functionality of `absoluteGaloisGroup`.
Upstreamed from FLT.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41416
- [x] depends on: #41417
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
FLT
label:t-algebra$ |
49/1 |
Mathlib/FieldTheory/AbsoluteGaloisGroup.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
none |
7-80544 7 days ago |
7-84914 7 days ago |
7-84381 7 days |
| 41743 |
themathqueen author:themathqueen |
chore: move `ContinuousLinearMap.extend` from `Analysis` to `Topology` |
According to #29888, the original definition was by Zhouhang Zhou in 2019, so I adjusted the copyright to that year.
No code is altered besides adding `public` and `@[expose]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
74/61 |
Mathlib.lean,Mathlib/Analysis/Normed/Operator/Extend.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Extend.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
7-79390 7 days ago |
7-80397 7 days ago |
7-80264 7 days |
| 41749 |
felixpernegger author:felixpernegger |
chore: remove redudant `have`'s |
This PR removes most unused `have` statements in mathlib.
Some edge cases (Prop valued fields, have statements with arguments, etc) are not yet included (but this already took my computer 7 hours, so I will push that for later).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
4/364 |
Archive/Imo/Imo1998Q2.lean,Counterexamples/NowhereDifferentiable.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Quasicoherent.lean,Mathlib/Algebra/ContinuedFractions/Computation/TerminatesIffRat.lean,Mathlib/Algebra/Homology/Factorizations/CM5a.lean,Mathlib/Algebra/Homology/SpectralObject/Basic.lean,Mathlib/Algebra/Homology/SpectralObject/HasSpectralSequence.lean,Mathlib/Algebra/Lie/Basis.lean,Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/Module/ZLattice/Covolume.lean,Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/Algebra/Order/CauSeq/BigOperators.lean,Mathlib/Algebra/Order/Floor/Ring.lean,Mathlib/Algebra/Order/Ring/WithTop.lean,Mathlib/Algebra/Polynomial/RuleOfSigns.lean,Mathlib/Algebra/Ring/Ext.lean,Mathlib/AlgebraicGeometry/FunctionField.lean,Mathlib/AlgebraicGeometry/Geometrically/Reduced.lean,Mathlib/AlgebraicGeometry/Group/Abelian.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/AlgebraicGeometry/Morphisms/QuasiFinite.lean,Mathlib/AlgebraicGeometry/OrderOfVanishing.lean,Mathlib/AlgebraicGeometry/QuasiAffine.lean,Mathlib/AlgebraicGeometry/StructureSheaf.lean,Mathlib/AlgebraicTopology/ModelCategory/BifibrantObjectHomotopy.lean,Mathlib/AlgebraicTopology/SimplicialSet/AnodyneExtensions/Inner/Basic.lean,Mathlib/AlgebraicTopology/SingularHomology/Basic.lean,Mathlib/Analysis/Calculus/FDeriv/Mul.lean,Mathlib/Analysis/Calculus/FDeriv/WithLp.lean,Mathlib/Analysis/Calculus/Taylor.lean,Mathlib/Analysis/InnerProductSpace/NormDet.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/Normed/Field/Krasner.lean,Mathlib/Analysis/Normed/Module/RCLike/Basic.lean,Mathlib/Analysis/Normed/Unbundled/SpectralNorm.lean,Mathlib/Analysis/Real/Pi/Irrational.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Rpow/ConjSqrt.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Rpow/RingInverseOrder.lean,Mathlib/Analysis/SpecialFunctions/Elliptic/Weierstrass.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Beta.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Angle.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/EulerSineProd.lean,Mathlib/CategoryTheory/Abelian/SerreClass/Localization.lean,Mathlib/CategoryTheory/ConcreteCategory/EpiMono.lean,Mathlib/CategoryTheory/EffectiveEpi/Comp.lean,Mathlib/CategoryTheory/Galois/Examples.lean,Mathlib/CategoryTheory/Generator/StrongGenerator.lean,Mathlib/CategoryTheory/Limits/Elements.lean,Mathlib/CategoryTheory/Limits/HasLimits.lean,Mathlib/CategoryTheory/Limits/Types/Pushouts.lean,Mathlib/CategoryTheory/LocallyCartesianClosed/ChosenPullbacksAlong.lean,Mathlib/CategoryTheory/Monoidal/Braided/Reflection.lean,Mathlib/CategoryTheory/MorphismProperty/CommaSites.lean,Mathlib/CategoryTheory/MorphismProperty/Limits.lean,Mathlib/CategoryTheory/Preadditive/Projective/Basic.lean,Mathlib/CategoryTheory/Presentable/CardinalFilteredPresentation.lean,Mathlib/CategoryTheory/Presentable/Retracts.lean,Mathlib/CategoryTheory/Sites/Coherent/LocallySurjective.lean,Mathlib/CategoryTheory/Sites/Continuous.lean,Mathlib/CategoryTheory/Sites/CoverPreserving.lean,Mathlib/CategoryTheory/Subobject/Limits.lean,Mathlib/CategoryTheory/Triangulated/Functor.lean,Mathlib/Combinatorics/Additive/VerySmallDoubling.lean,Mathlib/Combinatorics/SetFamily/AhlswedeZhang.lean,Mathlib/Combinatorics/SimpleGraph/Matching.lean,Mathlib/Condensed/Discrete/Characterization.lean,Mathlib/Condensed/Discrete/Colimit.lean,Mathlib/Data/Finset/Card.lean,Mathlib/Data/List/MinMax.lean,Mathlib/Data/List/PeriodicityLemma.lean,Mathlib/Data/Nat/Prime/Defs.lean,Mathlib/Data/Seq/Basic.lean,Mathlib/FieldTheory/Galois/IsGaloisGroup.lean,Mathlib/FieldTheory/NormalizedTrace.lean,Mathlib/FieldTheory/PurelyInseparable/Basic.lean,Mathlib/FieldTheory/PurelyInseparable/Tower.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/Geometry/Euclidean/Angle/Bisector.lean,Mathlib/Geometry/Euclidean/Inversion/Basic.lean,Mathlib/Geometry/Manifold/VectorBundle/CovariantDerivative/Basic.lean,Mathlib/Geometry/Manifold/VectorBundle/LocalFrame.lean,Mathlib/GroupTheory/GroupAction/Jordan.lean,Mathlib/GroupTheory/GroupAction/SubMulAction/Combination.lean,Mathlib/GroupTheory/IndexNSmul.lean,Mathlib/GroupTheory/Perm/MaximalSubgroups.lean,Mathlib/LinearAlgebra/Charpoly/BaseChange.lean,Mathlib/LinearAlgebra/Determinant.lean,Mathlib/LinearAlgebra/Dimension/Constructions.lean,Mathlib/LinearAlgebra/PiTensorProduct/DirectSum.lean,Mathlib/LinearAlgebra/Trace.lean,Mathlib/LinearAlgebra/Transvection/Basic.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/CondJensen.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/AbsolutelyContinuousFun.lean,Mathlib/MeasureTheory/Measure/Stieltjes.lean,Mathlib/MeasureTheory/Measure/Typeclasses/ZeroOne.lean,Mathlib/MeasureTheory/VectorMeasure/Integral.lean,Mathlib/NumberTheory/Bernoulli.lean,Mathlib/NumberTheory/Cyclotomic/Basic.lean,Mathlib/NumberTheory/Cyclotomic/PrimitiveRoots.lean,Mathlib/NumberTheory/DirichletCharacter/Basic.lean |
189 |
10 |
['SnirBroshi', 'felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
none |
7-58738 7 days ago |
7-61768 7 days ago |
7-64992 7 days |
| 40857 |
BryceT233 author:BryceT233 |
feat(RingTheory/Radical): radical of principal ideals in a UFD |
This PR resolves the "TODO" in `RingTheory/Radical/Basic.lean` by connecting `UniqueFactorizationMonoid.radical` with `Ideal.radical`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
large-import
|
44/4 |
Mathlib/RingTheory/Radical/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
7-56688 7 days ago |
31-39015 31 days ago |
31-38480 31 days |
| 37603 |
Parcly-Taxel author:Parcly-Taxel |
refactor: review of `SetSemiring` |
* Rename `Set.up` and `SetSemiring.down` to `SetSemiring.ofSet` and `SetSemiring.toSet` respectively. Unprotect both and make them equivalences, following `FreeMonoid`.
* Derive `CompleteAtomicBooleanAlgebra` for `SetSemiring` immediately.
* Add `imageHom_id` and `imageHom_comp`. The three existing lemmas about `imageHom` are coalesced into `imageHom_apply`.
Ultimately inspired by https://github.com/leanprover-community/mathlib4/pull/36934#issuecomment-4183475568. |
t-data |
119/164 |
Mathlib/Algebra/Algebra/Operations.lean,Mathlib/Data/Set/Semiring.lean |
2 |
45 |
['Parcly-Taxel', 'YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'ocfnash', 'sgouezel'] |
nobody |
1 |
7-50751 7 days ago |
7-52731 7 days ago |
43-62980 43 days |
| 41524 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Trails): in a preconnected Eulerian graph there exists an Eulerian circuit from any vertex |
This lets us take a circuit at a specific vertex, much like [`IsHamiltonian.exists_isHamiltonianCycle`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Combinatorics/SimpleGraph/Hamiltonian.html#SimpleGraph.IsHamiltonian.exists_isHamiltonianCycle) in Hamiltonian graphs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
23/1 |
Mathlib/Combinatorics/SimpleGraph/Trails.lean |
1 |
4 |
['SnirBroshi', 'github-actions', 'vlad902'] |
nobody |
none |
7-49885 7 days ago |
13-35893 13 days ago |
13-35358 13 days |
| 38871 |
0xTerencePrime author:0xTerencePrime |
feat(Combinatorics/SimpleGraph): add parity lemmas for outer and inner vertices |
Adds three lemmas to `SimpleGraph.DegreeSum`:
- `sum_degrees_option_zmod_two`: the handshaking lemma for `Option I` over ZMod 2
- `degree_none_zmod_two_eq_sum`: simp-normal form of the above
- `card_degree_one_option_eq_outer_zmod_two`: under degree bound ≤ 2, count of degree-1 inner vertices equals outer vertex degree mod 2 |
t-combinatorics
new-contributor
|
65/3 |
Mathlib/Combinatorics/SimpleGraph/DegreeSum.lean |
1 |
6 |
['0xTerencePrime', 'SnirBroshi', 'github-actions'] |
nobody |
none |
7-49710 7 days ago |
80-7395 80 days ago |
80-6860 80 days |
| 41736 |
pechersky author:pechersky |
feat: generalize SMul instances from DistribMulAction to DistribSMul |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
Affected types:
- `M →SL[σ₁₂] M₂` (semilinear maps)
- `ContinuousMultilinearMap 𝕜 E G`
- `FreeLieAlgebra R X`
- `𝓓^{n}_{K}(E, F)` (compactly supported smooth functions)
- `𝓓^{n}(Ω, F)` (test functions)
---
Discovered while working on #40785.
Used GPT 5.6 Terra to classify hunks from the originating PR and do the cherry-pick operations. |
t-analysis |
72/15 |
Mathlib/Algebra/Lie/Free.lean,Mathlib/Analysis/Distribution/ContDiffMapSupportedIn.lean,Mathlib/Analysis/Distribution/TestFunction.lean,Mathlib/Analysis/Normed/Module/Multilinear/Basic.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
5 |
1 |
['github-actions'] |
nobody |
none |
7-47971 7 days ago |
8-343 7 days ago |
7-86208 7 days |
| 35812 |
khwilson author:khwilson |
feat(MeasureTheory/Group/GeometryOfNumbers): successive minima and existence of a directional basis |
Define the successive minima of a discrete subgroup of a real vector space with respect to a convex set. These invariants show up throughout the geometry of numbers and are the focus of Minkowski's Second Theorem (whose statement is left here with a `proof_wanted`).
Note: The key lemma is that the "gauge set" of the convex set is closed. I took the approach of showing that it is sequentially closed. There's an alternative approach via showing it's the union of a finite number of closed sets. I personally thought this approach was more intuitive, but the union approach may result in a slightly shorter proof.
Co-authored-by: Yaël Dillies <yael.dillies@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [x] depends on: #xyz [optional extra text]
-->
- [x] depends on #37738
- [x] depends on #37740
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-measure-probability
|
350/36 |
Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Analysis/Convex/Basic.lean,Mathlib/Analysis/Convex/Body.lean,Mathlib/Analysis/Convex/Gauge.lean,Mathlib/LinearAlgebra/FiniteDimensional/Basic.lean,Mathlib/MeasureTheory/Group/GeometryOfNumbers.lean,Mathlib/NumberTheory/NumberField/Units/Regulator.lean |
7 |
98 |
['Vierkantor', 'YaelDillies', 'github-actions', 'joneugster', 'khwilson', 'mathlib-merge-conflicts', 'ocfnash', 'sgouezel'] |
nobody |
1 |
7-45949 7 days ago |
12-71766 12 days ago |
75-60283 75 days |
| 40473 |
karlesmarin author:karlesmarin |
feat(LinearAlgebra/Matrix): the Cauchy-Binet formula |
Adds the Cauchy–Binet formula. For `A : Matrix m n R` and `B : Matrix n m R` over a commutative ring, `det (A * B)` is the sum, over the `Fintype.card m`-element subsets `S` of `n`, of the product of the two maximal minors selected by `S`.
Main results:
* `Matrix.det_mul_eq_sum_det_submatrix_mul_prod` — the Leibniz-type expansion of `det (A * B)` over all index functions `g : m → n`.
* `Matrix.det_mul_cauchyBinet` — the Cauchy–Binet formula.
The proof expands over all `g : m → n`, discards the non-injective ones, and groups the rest by image.
|
|
199/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Matrix/Determinant/CauchyBinet.lean |
2 |
6 |
['github-actions', 'karlesmarin', 'mathlib-merge-conflicts', 'wwylele', 'yuanyi-350'] |
nobody |
none |
7-39017 7 days ago |
7-39499 7 days ago |
41-45477 41 days |
| 40700 |
YaelDillies author:YaelDillies |
feat(FieldTheory): generalise `Separable.of_algHom` |
From BrauerGroup
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
12/19 |
Mathlib/FieldTheory/Separable.lean |
1 |
3 |
['Multramate', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
7-26947 7 days ago |
7-27892 7 days ago |
34-82972 34 days |
| 41596 |
teorth author:teorth |
feat(Archive/RiemannStieltjes): archived version of the Riemann-Stieltjes and Riemann integrals |
Construction of the Riemann and Riemann-Stieltjes integrals, based on the BoxIntegral API. These notions are weaker than the Bochner and vector-valued integrals already in Mathlib, so after the discussion in #41108 and https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/What.20to.20do.20with.20weak.20but.20standard.20math.2C.20e.2Eg.2E.20Riemann.20integ.3F , the basic definitions are being PR'ed to Archive rather than Mathlib.
---
The code was primarily human-generated, but AI was used to review the submission.
- [ ] depends on: #41592
[](https://gitpod.io/from-referrer/)
|
t-analysis |
546/3 |
Archive.lean,Archive/RiemannStieltjes.lean,Mathlib/Analysis/BoxIntegral/Basic.lean,Mathlib/Analysis/BoxIntegral/Partition/Additive.lean |
4 |
2 |
['github-actions', 'madvorak', 'mathlib-dependent-issues'] |
nobody |
1 |
7-23498 7 days ago |
9-15914 9 days ago |
9-17844 9 days |
| 40040 |
JovanGerb author:JovanGerb |
chore(Order/Bounds/Basic): add missing `to_dual` tags |
This PR adds some `to_dual` tags that weren't added in #35208
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
43/68 |
Mathlib/Order/Bounds/Basic.lean |
1 |
1 |
['github-actions', 'madvorak', 'vihdzp'] |
nobody |
2 |
7-22417 7 days ago |
53-15594 53 days ago |
53-15059 53 days |
| 40855 |
NoahW314 author:NoahW314 |
feat(Data/ENNReal): add `sum_div` |
`Finset.sum_div` does not apply since `ℝ≥0∞` is not a `DivisionSemiring`. Although the proof of `Finset.sum_div` (and of this lemma) only needs `DivInvMonoid` and `NonUnitalNonAssocSemiring`, the best typeclass including these is `DivisionSemiring`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
Removed the `open ENNReal` in `MeanInequalities` to avoid ambiguity with `Finset.sum_div`.
|
t-data |
7/1 |
Mathlib/Analysis/MeanInequalities.lean,Mathlib/Data/ENNReal/BigOperators.lean |
2 |
2 |
['SnirBroshi', 'github-actions', 'madvorak'] |
nobody |
1 |
7-21967 7 days ago |
31-52882 31 days ago |
31-52885 31 days |
| 40310 |
felixpernegger author:felixpernegger |
chore(Algebra): remove an `erw` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
3/4 |
Mathlib/Algebra/Ring/Divisibility/Basic.lean |
1 |
10 |
['felixpernegger', 'github-actions', 'grunweg', 'j-loreaux', 'madvorak', 'mathlib-bors'] |
nobody |
1 |
7-20974 7 days ago |
33-5913 33 days ago |
34-31965 34 days |
| 40276 |
gasparattila author:gasparattila |
feat(Order/Partition/Finpartition): lemmas for `restrict` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
34/1 |
Mathlib/Order/Partition/Finpartition.lean |
1 |
1 |
['github-actions', 'madvorak'] |
nobody |
1 |
7-19836 7 days ago |
46-57215 46 days ago |
46-56680 46 days |
| 41702 |
smmercuri author:smmercuri |
chore: make `adicCompletion` and `Completion` print nicer |
- Stop `toCompletion` and `ofCompletion` printing with braces
- Arguments to `completionMap` should be explicit.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
37/6 |
Mathlib/NumberTheory/NumberField/Completion/InfinitePlace.lean,Mathlib/NumberTheory/NumberField/Completion/LiesOverInstances.lean,Mathlib/RingTheory/DedekindDomain/AdicValuation.lean |
3 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
6-81038 6 days ago |
6-83472 6 days ago |
8-50750 8 days |
| 41291 |
tb65536 author:tb65536 |
refactor(RingTheory/IntegralClosure/IsIntegral/Basic): use `FaithfulSMul` in `isIntegral_algebraMap_iff` |
Currently `isIntegral_algebraMap_iff` takes an explicit assumption stating that `algebraMap A B` is nonzero, but a `[FaithfulSMul A B]` typeclass is more idiomatic (and can almost always be inferred automatically).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
25/30 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Algebra.lean,Mathlib/NumberTheory/Niven.lean,Mathlib/NumberTheory/NumberField/CMField.lean,Mathlib/NumberTheory/NumberField/Cyclotomic/Basic.lean,Mathlib/RingTheory/Adjoin/PowerBasis.lean,Mathlib/RingTheory/IntegralClosure/IntegralRestrict.lean,Mathlib/RingTheory/IntegralClosure/IntegrallyClosed.lean,Mathlib/RingTheory/IntegralClosure/IsIntegral/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Defs.lean,Mathlib/RingTheory/Invariant/Galois.lean,Mathlib/RingTheory/IsGaloisGroup/Basic.lean,Mathlib/RingTheory/Norm/Transitivity.lean,Mathlib/RingTheory/Trace/Basic.lean,Mathlib/RingTheory/ZariskisMainTheorem.lean |
15 |
2 |
['github-actions', 'plp127'] |
nobody |
1 |
6-80802 6 days ago |
6-85480 6 days ago |
20-1734 20 days |
| 41781 |
teng10 author:teng10 |
feat(Algebra/Representation): add abstract permutation action in TensorPower |
Hello, I'm a new contributor. I had an introduction here on [zulip](https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Introduction.3A.20Schur.20Weyl.20Duality/with/607194314)
This PR is a first step in formalizing Shur Weyl duality, which I got feedback that it would be useful to mathlib. The final statement I had in mind has the form
/--
The centralizer of `{g^{⊗k} | g ∈ End(V)}`equals `Span{W_σ | σ ∈ S_k}`, for all dimensions `d` and tensor powers `k`.
---/
This PR tries to define permutation action on TensorPower; define permutation image space.
An initial version of the definition is more specific to the Euclidean space (for reference I list them below)
```
open scoped TensorProduct
variable {d : ℕ} {k : ℕ}
/-- The `k`-fold tensor power of `ℂ^d`, defined as `⨂[ℂ] (i : Fin k), (Fin d → ℂ)`. -/
abbrev PiTensorPower (d k : ℕ) : Type :=
PiTensorProduct ℂ (fun (_ : Fin k) => (Fin d → ℂ))
/-- The permutation operator `W_σ` on the tensor power `V^{⊗k}`.
Given `σ : Equiv.Perm (Fin k)`, this acts by permuting the tensor factors:
`W_σ (v₁ ⊗ ⋯ ⊗ vₖ) = v_{σ⁻¹(1)} ⊗ ⋯ ⊗ v_{σ⁻¹(k)}`. -/
def permAction (d : ℕ) {k : ℕ} (σ : Equiv.Perm (Fin k)) :
PiTensorPower d k ≃ₗ[ℂ] TensV d k :=
PiTensorProduct.reindex ℂ (fun (_ : Fin k) => (Fin d → ℂ)) σ
/-- The set of permutation operators in `End(V^{⊗k})`. -/
def permImage (d k : ℕ) : Set (Module.End ℂ (TensV d k)) :=
Set.range (fun σ : Equiv.Perm (Fin k) => (permAction d σ).toLinearMap)
```
LLM acknowledgement: I have used aristotle to write these definitions. However, I am very motivated to learn how to write proper code. I have looked more into `PiTensorProduct` and `TensorPower` module and came to the abstract version in the PR. I tried to ask aristotle about how it's defining things and whether it's suitable for mathlib.
And I would very much appreciate your thoughts on how appropriate these definitions are. Thanks for your time!
Yanting
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
new-contributor
label:t-algebra$ |
22/0 |
Mathlib/LinearAlgebra/TensorPower/Basic.lean |
1 |
4 |
['github-actions', 'teng10'] |
nobody |
none |
6-80421 6 days ago |
6-83021 6 days ago |
6-82502 6 days |
| 41777 |
ADedecker author:ADedecker |
chore: switch `IsQuasiInverse.of_comp_[left, right]` |
Also add a bit of doc and switch some arguments to enforce some asymmetry in the API for `IsQuasiInverse`: as a convention, we think of the first argument as a quasi-inverse to the second one, instead of the converse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
36/22 |
Mathlib/Algebra/Module/LinearMap/FiniteRange.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
6-80312 6 days ago |
6-84130 6 days ago |
6-83595 6 days |
| 41775 |
JovanGerb author:JovanGerb |
chore(Order/SymmDiff): use `to_dual` |
This PR generates `bihimp` from `symmDiff` using `to_dual`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
45/161 |
Mathlib/Order/SymmDiff.lean,Mathlib/Tactic/Translate/ToDual.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
6-79688 6 days ago |
6-84481 6 days ago |
6-83946 6 days |
| 41774 |
gasparattila author:gasparattila |
feat(Topology/Algebra): topology on `ContinuousAffineMap` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
large-import
|
236/4 |
Mathlib.lean,Mathlib/Analysis/Normed/Affine/ContinuousAffineMap.lean,Mathlib/Topology/Algebra/ContinuousAffineMap/Topology.lean,Mathlib/Topology/Algebra/Group/Torsor.lean |
4 |
1 |
['github-actions'] |
nobody |
none |
6-79553 6 days ago |
6-82934 6 days ago |
6-83522 6 days |
| 41787 |
felixpernegger author:felixpernegger |
chore: no `public def` inside `public section` etc |
Removes all the private/public keywords in front of a declaration, when we are already in a private/public section anyways. (no private ever appears)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
easy |
3/3 |
Mathlib/AlgebraicGeometry/StructureSheaf.lean,Mathlib/GroupTheory/SpecificGroups/Alternating/Simple.lean,MathlibTest/Util/AliasIn/AliasInModuleSystem.lean |
3 |
3 |
['felixpernegger', 'github-actions'] |
nobody |
none |
6-71656 6 days ago |
6-72515 6 days ago |
6-72873 6 days |
| 41403 |
YaelDillies author:YaelDillies |
chore(Algebra/SkewMonoidAlgebra): deprecate `sum` |
One should just use `Finsupp.sum` instead.
---
- [x] depends on: #41365
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
125/154 |
Mathlib/Algebra/SkewMonoidAlgebra/Basic.lean,Mathlib/Algebra/SkewMonoidAlgebra/Lift.lean,Mathlib/Algebra/SkewMonoidAlgebra/Support.lean,Mathlib/Algebra/SkewPolynomial/Basic.lean |
4 |
15 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
none |
6-71467 6 days ago |
14-10330 14 days ago |
14-13397 14 days |
| 35078 |
grunweg author:grunweg |
feat: immersed points |
Define immersed points of a (differentiable) map between manifolds, and prove that immersed points compose.
Future PRs show that `x` is an immersed point of `f` if and only if `f` is an immersion at `x`:
thus, proving the composition of immersed points (which follows immediately from the chain rule)
implies the composition of immersions (which is not obvious from their definition.
From the path towards immersions, embeddings and submanifolds.
---
- [x] depends on: #35057
- [x] depends on: #35284
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
187/1 |
Mathlib.lean,Mathlib/Analysis/Normed/Module/ContinuousInverse.lean,Mathlib/Geometry/Manifold/ImmersedPoint.lean,Mathlib/Geometry/Manifold/LocalDiffeomorph.lean |
4 |
5 |
['github-actions', 'grunweg', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
none |
6-67681 6 days ago |
6-68265 6 days ago |
6-67736 6 days |
| 41793 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph): `fromEdgeSet edgeSet` for subgraphs and walks |
`fromEdgeSet G'.edgeSet = G'.spanningCoe` for a subgraph `G'`
`fromEdgeSet p.edgeSet = p.toSubgraph.spanningCoe` for a walk `p`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
16/2 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
6-65940 6 days ago |
6-66517 6 days ago |
6-65982 6 days |
| 41203 |
grunweg author:grunweg |
feat: post-composing an immersion with a diffeomorphism yields an immersion |
Use this to golf the proof that `Sum.inr` is a smooth embedding: requested by `@chrisflav` in #40507.
This lemma is a special case of "the composition of immersions is an immersion"; the latter may require additional completeness hypotheses on the underlying manifold or model normed space (which this statement does not).
---
- [x] depends on: #40720
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
51/12 |
Mathlib/Geometry/Manifold/Immersion.lean |
1 |
4 |
['github-actions', 'grunweg', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
none |
6-64317 6 days ago |
6-64882 6 days ago |
6-67897 6 days |
| 41800 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): `IsTrail` `concat` iff |
---
Also golf and fix the name of `concat_isPath_iff`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/5 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
6-59371 6 days ago |
6-59977 6 days ago |
6-59442 6 days |
| 41798 |
FrankieNC author:FrankieNC |
feat(MeasureTheory): pushforward of Hausdorff measure under a homothety |
Prove `Measure.map (AffineMap.homothety x c) μH[d] = ‖c‖₊⁻¹ ^ d • μH[d]` for `c ≠ 0`, resolving the TODO in `Mathlib/MeasureTheory/Measure/Hausdorff.lean`: the generalisation of `AffineMap.homothety_continuous` it was waiting for has since been merged, so the result follows from `hausdorffMeasure_homothety_preimage` via `Measure.ext`. |
t-measure-probability |
5/3 |
Mathlib/MeasureTheory/Measure/Hausdorff.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
6-57330 6 days ago |
6-60465 6 days ago |
6-59930 6 days |
| 41361 |
lakesare author:lakesare |
feat(Order/ConditionallyCompleteLattice/Finset): add `sup_eq_ciSup` |
From the Carleson project.
___
**Upstreaming from Carleson: [/Carleson/ToMathlib/Data/Finset/Lattice/Fold.lean](https://github.com/fpvandoorn/carleson/blob/a3e427dc0f23f6b818c7f7d32f2b1d2ccfab1f21/Carleson/ToMathlib/Data/Finset/Lattice/Fold.lean)**
Changes from the Carleson version:
1. `sup_eq_iSup'` is refactored (to shorten the proof & to make some of the imports unnecessary)
2. `sup_eq_iSup'` is renamed to `sup_eq_ciSup`
3. Carleson-suggested file was `/Data/Finset/Lattice/Fold.lean`, but we placed the theorem into `/Order/ConditionallyCompleteLattice/Finset.lean`
|
carleson
new-contributor
t-order
|
7/4 |
Mathlib/Order/ConditionallyCompleteLattice/Finset.lean |
1 |
17 |
['SnirBroshi', 'github-actions', 'j-loreaux', 'lakesare'] |
nobody |
1 |
6-57057 6 days ago |
8-57424 8 days ago |
9-3567 9 days |
| 41803 |
benjub author:benjub |
feat(Topology/order/IntermediateValue): continuous induction from sSup membership |
Add `mem_of_csSup_mem_of_forall_exists_gt`, that generalizes `IsClosed.mem_of_ge_of_forall_exists_gt` by weakening the closedness hypothesis to membership of the supremum. Derive `IsClosed.mem_of_ge_of_forall_exists_gt` from it.
---
This result was already in essence in `IsClosed.mem_of_ge_of_forall_exists_gt`, which uses closedness only to obtain membership of the supremum.
This new result does not require `[TopologicalSpace α] [OrderTopology α]` (it is purely order-theoretic), but I still placed it next to `IsClosed.mem_of_ge_of_forall_exists_gt`. I am open to moving it to another file if the reviewer sees fit.
There are cases where that more general lemma is needed, because closedness either does not hold or would be longer to prove. For instance, I need that generalization to shorten the proof in the draft PR #41552. |
t-topology
new-contributor
|
21/11 |
Mathlib/Topology/Order/IntermediateValue.lean |
1 |
3 |
['benjub', 'github-actions'] |
nobody |
none |
6-50619 6 days ago |
6-52494 6 days ago |
6-51959 6 days |
| 38815 |
dagurtomas author:dagurtomas |
feat(Tactic/CategoryTheory): extend `@[to_app]` to natural transformations |
This extends the `@[to_app]` attribute so it also generates componentwise lemmas from equalities of natural transformations between functors, while preserving the existing bicategory behavior. It also ensures generated component lemmas remain usable by dsimp when they are definitionally true. |
t-category-theory
LLM-generated
t-meta
|
148/22 |
Mathlib/Tactic/CategoryTheory/ToApp.lean,Mathlib/Util/AddRelatedDecl.lean,MathlibTest/CategoryTheory/ToApp.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
6-49711 6 days ago |
81-75211 81 days ago |
81-74730 81 days |
| 37680 |
IvanRenison author:IvanRenison |
feat(Combinatorics/SimpleGraph/Clique): add lemmas about isomorphisms and cliques |
---
Idea from this Zulip thread: [#**graph theory>Second Order Monadic Logic for Graph** ](https://leanprover.zulipchat.com/#narrow/channel/252551-graph-theory/topic/Second.20Order.20Monadic.20Logic.20for.20Graph/with/583013775)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37649
- [x] depends on: #37640
- [x] depends on: #37676
- [x] depends on: #37697
- [x] depends on: #37700
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
86/0 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean |
1 |
6 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
none |
6-49709 6 days ago |
45-3886 45 days ago |
45-3883 45 days |
| 39288 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/Subgraph): add `Embedding.ofIsInduced` and `IsInduced.map` |
Three additions to the `SimpleGraph.Subgraph` API for induced subgraphs. `Embedding.ofIsInduced` is the canonical embedding of an induced subgraph into its ambient graph, paired with `toHom_ofIsInduced` and `ofIsInduced_apply` lemmas. This is the embedding counterpart of `Subgraph.hom`, which only produces a homomorphism because non-induced subgraphs do not reflect adjacency. `Subgraph.IsInduced.map` then records that the image of an induced subgraph under a graph embedding is induced, strengthened to `IsInduced.map_iff` for the iso case.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
**Orthogonal pre-requisite of the `Copy` / `InducedCopy` refactor-feat stack.**
Extracted as a prerequisite from #38631 that is otherwise independent of the wider `Copy` / `InducedCopy` refactor-feat stack. |
t-combinatorics |
27/4 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
2 |
16 |
['FordUniver', 'SnirBroshi', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
none |
6-49708 6 days ago |
58-27451 58 days ago |
69-62832 69 days |
| 39505 |
dannyhe652 author:dannyhe652 |
feat(SimpleGraph): add Vizing's theorem for edge coloring |
Hi! I'm a high school student interested in formulization of mathematics in Lean. Recently, I have worked on a project to formulize Vizing Theorem with Daniel Raggi from Cambridge University with AI assistance. In particular, we first drafted an outline for the proof, and built the proof using Claude Opus 4.5 and 4.6. The proof is optimized using Aristotle and finally reviewed by ourselves. We rewrote some parts of the code and some comments. The code now builds cleanly and we wish this code to be reviewed by Lean Community. I am aware that there are previous attempts, some being successful, on formulizing Vizing Theorem, including this one by Arohee https://github.com/aroheebhoja/vizing. However, I believe that no PR have been made. Our proof is not based on his proof, but it could be helpful for the community to review that project as well. I sincerely thank everyone who has time to verify and review our code. A summary of the project is as follows. Please contact me if there are any questions or problems.
## Summary
This PR completes the proof of **Vizing's theorem** for edge coloring in simple graphs, proving that the chromatic index of any graph is either Δ (the maximum degree) or Δ + 1.
## Changes
### New files
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeColoring.lean`** — Core definitions
- `edgeColoring`: Type for line graph colorings
- `edgeColorable`: Graph is edge-colorable with n colors
- `chromaticIndex`: Chromatic index as ℕ
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/KempeChain.lean`** — Kempe Chain
- Coloring observables: `incidentEdges`, `incidentColors`, `missingColors`
- Kempe subgraph structure with bounded degree
- `swapKempe`: Recolor edges in a connected component via color-swapping
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/VizingFan.lean`** — Vizing Fan Rotation
- `IsFan`: Vizing fan structure with special color properties
- Fan maximality and dichotomy on terminal vertices
- `rotate_termA`: Extend coloring when a free color exists at both endpoints
- `vizingAdjacencyLemma`: Main adjacency lemma for both cases
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/VizingTheorem.lean`** — Main theorems
- `edge_eq_of_color_eq`: Proper edge colorings assign different colors to distinct edges sharing a vertex
- `maxDegree_le_chromaticIndex`: χ'(G) ≥ Δ(G)
- `chromaticIndex_bot`: Empty graph has chromatic index 0
- `vizingUpperBound_aux`: Inductive proof of upper bound on number of edge
- `vizingTheorem`: χ'(G) ∈ {Δ(G), Δ(G) + 1}
### Modified files
- `Mathlib.lean` — Added imports for the four new coloring modules
## Technical Approach
**Lower bound** (χ'(G) ≥ Δ):
- Edges incident to a max-degree vertex form a clique in the line graph
- Clique number lower-bounds chromatic number
**Upper bound** (χ'(G) ≤ Δ + 1):
- Induction on the number of edges
- Base case: empty graph colored with 0 colors
- Inductive step:
- If a free color exists at both endpoints of an edge, then extend directly
- Otherwise:
- Build a maximal fan from one endpoint
- Apply dichotomy: either extend via Term-A (free color at both endpoints) or Term-B (Kempe swap)
- Term-B uses a three-vertex connectivity argument to derive a contradiction, forcing the fan to extend
## Key Lemmas
- `incidentEdges`, `incidentColors`, `missingColors`: Coloring observables at vertices
- `kempeSubgraph`: Restricted subgraph of edges with two specific colors
- `swapKempe`: Recolor via Kempe chain swapping
- `IsFan.singleton`: Trivial fan always valid
- `IsFan.length_le_card`: Fan length is bounded by vertex count
- `IsFan.dichotomy`: Maximal fan satisfies Term-A or Term-B
- `IsFan.rotate_termA`: Term-A case extends the coloring inductively
- `vizingAdjacencyLemma`: Handles both cases for extending one edge
- `vizingUpperBound_aux`: Framework for full inductive proof
- `edge_eq_of_color_eq`: Distinctness of edges with same color
## Testing
All four modules compile with no `sorry` nor errors or warnings.
## References
* V. G. Vizing, *On an estimate of the chromatic class of a p-graph*,
Diskret. Analiz. 3 (1964), 25–30.
## Co-authors
Co-authored-by: Daniel Raggi <dr495@cam.ac.uk>
Co-authored-by: Aristotle (Harmonic) <aristotle-harmonic@harmonic.fun>
Co-authored-by: Claude Opus 4.5 & 4.6 <noreply@anthropic.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
|
1913/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeColoring.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/KempeChain.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/VizingFan.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/VizingTheorem.lean |
5 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
6-49707 6 days ago |
33-24968 33 days ago |
54-286 54 days |
| 39530 |
RaggedR author:RaggedR |
feat(Combinatorics/SimpleGraph): group actions on simple graphs |
This adds the first connection between Mathlib's MulAction and SimpleGraph libraries. The GraphAction class asserts that a group action on the vertex type preserves the adjacency relation, and builds on it to define vertex-transitivity and arc-transitivity for graphs.
The GraphAction typeclass gives adj_smul_iff (the biconditional for group actions) and toIso (each group element induces a graph automorphism). The IsVertexTransitive class combines GraphAction with IsPretransitive, and IsArcTransitive requires transitivity on ordered adjacent pairs (arcs).
The main theorem is the standard characterization: a graph is arc-transitive if and only if it is vertex-transitive and locally transitive (the stabilizer of each vertex acts transitively on its neighbors). The forward direction is proved directly by composing a vertex-transporting element with a neighbor-transporting stabilizer element. The reverse direction shows that an arc-transitive graph with no isolated vertices is vertex-transitive.
These definitions are the algebraic graph theory prerequisites for formalizing coset graphs (Sabidussi's construction) and the characterization of symmetric graphs via double cosets and involutions (Lorimer's theorem).
---
LLM tools were used to assist with Lean formalization. The mathematical content is the author's own work. |
t-combinatorics
new-contributor
LLM-generated
|
130/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Action.lean |
2 |
7 |
['RaggedR', 'b-mehta', 'github-actions', 'mathlib-bors'] |
nobody |
none |
6-49706 6 days ago |
60-13594 60 days ago |
64-67909 64 days |
| 39627 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/LapMatrix): 0 is always an eigenvalue |
and the determinant is always zero, plus a few other small lemmas.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39642
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
71/15 |
Mathlib/Combinatorics/SimpleGraph/LapMatrix.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
none |
6-49706 6 days ago |
62-10581 62 days ago |
62-57756 62 days |
| 38328 |
astrainfinita author:astrainfinita |
feat: `OrderSupSet` |
This PR introduces `OrderSupSet` and `OrderInfSet`, which are typeclasses expressing that `sSup` (resp., `sInf`) returns the least upper bound (resp., the greatest lower bound) of a set whenever one exists.
This allows us to prove properties about the `sSup` of specific sets (such as `∅`, singletons, finite sets, and `univ`) without any typeclasses asserting the existence of LUBs. For example, `sSup ∅ = ⊥` holds for any type equipped with `OrderBot` `OrderSupSet`, no longer requiring typeclasses like `ConditionallyCompleteLinearOrderBot`.
For a general set `s`, this gives a uniform way to extend results about `IsLUB s a → motive a` to `motive (sSup s)`, `motive (⨆ i, f i)`, `motive (a ⊔ b)`, etc., which allows proof reuse for basic API such as [`csSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/ConditionallyCompleteLattice/Basic.html#csSup_insert), [`iSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/CompleteLattice/Basic.html#iSup_insert), and [`sSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/CompleteLattice/Basic.html#sSup_insert) and downstream code like [`csSup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Pointwise/CompleteLattice.html#csSup_add), [`sSup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Pointwise/CompleteLattice.html#sSup_add), and [`sup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Lattice.html#sup_add).
Furthermore, this allows us to refactor incrementally, reducing the dependency of results about various completeness typeclasses on the specific implementation of `sSup`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/Any.20infimum.20based.20version.20of.20.60OmegaCompletePartialOrder.60.3F)
[](https://gitpod.io/from-referrer/)
|
t-order |
156/73 |
Mathlib/MeasureTheory/OuterMeasure/Induced.lean,Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/Bounds/Defs.lean,Mathlib/Order/CompleteLattice/Basic.lean,Mathlib/Order/CompleteLattice/Defs.lean,Mathlib/Order/SetNotation.lean,Mathlib/Topology/UniformSpace/OfCompactT2.lean |
7 |
16 |
['JovanGerb', 'astrainfinita', 'b-mehta', 'github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'openendings', 'vihdzp'] |
nobody |
1 |
6-49705 6 days ago |
74-27027 74 days ago |
79-57200 79 days |
| 38906 |
lua-vr author:lua-vr |
feat(ConditionallyCompleteLattice/Indexed): add binary versions of lemmas |
Add binary versions of some of the lemmas. Those are useful when the domain is indexed over the members of a set.
From the Carleson project.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
carleson
|
21/5 |
Mathlib/Order/ConditionallyCompleteLattice/Indexed.lean |
1 |
19 |
['JovanGerb', 'SnirBroshi', 'github-actions', 'grunweg', 'lua-vr', 'mathlib-merge-conflicts'] |
nobody |
1 |
6-49703 6 days ago |
64-1433 64 days ago |
73-61211 73 days |
| 39369 |
pd4st8hb95-hub author:pd4st8hb95-hub |
feat: add basic fuzzy set definitions |
This PR adds a minimal `FuzzySet` API in `Mathlib/Order/FuzzySet`.
A fuzzy set is represented as an abbreviation:
`FuzzySet α L := α → L`
The file provides basic definitions and lemmas:
- `degree`
- `support`
- `core`
- `weakCut`
- `strongCut`
- membership simp lemmas
- extensionality
- basic monotonicity lemmas for weak and strong cuts
This PR intentionally does not add complement, union/intersection-specific API, normal or convex fuzzy sets, fuzzy relations, or advanced fuzzy set theory.
Validation:
- `lake build Mathlib.Order.FuzzySet`
- `#lint only docBlame docBlameThm`
Feedback on whether `Mathlib/Order/FuzzySet.lean` is the right location for this minimal API would be appreciated.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
new-contributor
|
169/0 |
Mathlib.lean,Mathlib/Order/FuzzySet.lean |
2 |
6 |
['github-actions', 'grunweg', 'pd4st8hb95-hub', 'wwylele'] |
nobody |
none |
6-49703 6 days ago |
67-3441 67 days ago |
67-3266 67 days |
| 39438 |
SnirBroshi author:SnirBroshi |
chore(Order/WellFounded): use `to_dual` |
Creates `argmax`/`argmaxOn` duals to the existing `argmin`/`argminOn`,
and `WellFoundedLT.min`/`WellFoundedGT.max` in order to properly dualize `WellFounded.min_le`.
Some theorems about `WellFounded{LT/GT}` which didn't have a dual before have to be renamed to make room,
e.g. `StrictMono.range_inj` is renamed to `StrictMono.range_inj_of_wellFoundedLT`.
---
This is blocking dualizing things in `ConditionallyCompleteLattice/Basic.lean`.
`WellFounded.min_le` has ~30 usages in ~10 files, so deprecating it should probably happen in a separate PR.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
83/34 |
Mathlib/Data/Finset/Sort.lean,Mathlib/Order/Hom/Set.lean,Mathlib/Order/WellFounded.lean,Mathlib/SetTheory/Ordinal/Enum.lean,Mathlib/Tactic/Translate/ToDual.lean |
5 |
10 |
['JovanGerb', 'SnirBroshi', 'github-actions', 'vihdzp'] |
nobody |
1 |
6-49702 6 days ago |
67-46859 67 days ago |
67-54920 67 days |
| 39549 |
Hagb author:Hagb |
feat(Order/RelIso/Basic): `swap`s and `compl`s are `Equiv`s |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
13/8 |
Mathlib/Order/RelIso/Basic.lean |
1 |
3 |
['Hagb', 'github-actions', 'leanprover-radar'] |
nobody |
none |
6-49701 6 days ago |
64-67625 64 days ago |
64-67090 64 days |
| 39553 |
Brian-Nugent author:Brian-Nugent |
feat(Algebra/CategoryTheory/ModuleCat): Locally Free is local |
We define `SheafOfModules.LocalGeneratorsData.bind` just like `SheafOfModules.QuasicoherentData.bind` and use it to show that being locally free is a local condition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39544
- [ ] depends on: #39399
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
61/4 |
Mathlib/Algebra/Category/ModuleCat/Sheaf/Generators.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/LocallyFree.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Quasicoherent.lean |
3 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
none |
6-49696 6 days ago |
44-71154 44 days ago |
44-77177 44 days |
| 36605 |
martinwintermath author:martinwintermath |
feat(Geometry/Convex/Cone): Add lemmas about interaction of hull, span and negation |
Prove lemmas about the interaction of hull, span and negation.
Main additions:
* `PointedCone.toSubmodule` that produces a submodule with the same support given that `-C = C`. Also the corresponding `CanLift`
* `PointedCone.hull_neg_pair_eq_span_singleton` proving `hull R {-x, x} = R ∙ x` (simp lemma)
* `PointedCone.span_eq_hull_neg_sup_hull` proving `span R s = hull R (-s) ⊔ hull R s`
* `PointedCone.mem_span` proving `x ∈ span R C ↔ ∃ p, n ∈ C, x = p - n`
Considerations: there are several ways to express that a convex cone is a submodule:
* `-C = C`
* `-C ≤ C` or `C ≤ -C`
* `C = span R C`
* `C = C.lineal`
The consensus was that the the first option is the most direct way to express this property, which then allows to lift to a submodule.
Co-authored by: Olivia Röhrig, Kilian Rueß, Artie Khovanov
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37464
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry |
65/0 |
Mathlib/Geometry/Convex/Cone/Pointed.lean |
1 |
74 |
['YaelDillies', 'artie2000', 'github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
1 |
6-49693 6 days ago |
57-66614 57 days ago |
74-66685 74 days |
| 36719 |
NoneMore author:NoneMore |
feat(ModelTheory): add `PartialType` for first-order theories |
This PR adds the definitions of partial types over theories and over parameter sets, and proves several equivalent characterizations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36667
[](https://gitpod.io/from-referrer/)
|
t-logic
new-contributor
|
432/17 |
Mathlib.lean,Mathlib/ModelTheory/PartialTypes.lean,Mathlib/ModelTheory/Semantics.lean |
3 |
7 |
['NoneMore', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
none |
6-47432 6 days ago |
6-47953 6 days ago |
14-30379 14 days |
| 41447 |
SnirBroshi author:SnirBroshi |
chore(Combinatorics/SimpleGraph/Trails): golf and cleanup |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
45/77 |
Mathlib/Combinatorics/SimpleGraph/Trails.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
6-39674 6 days ago |
14-81524 14 days ago |
14-80989 14 days |
| 41623 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Trails): a walk is Eulerian iff it is a trail of length `G.edgeSet.encard` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
|
42/7 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Trails.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
6-39468 6 days ago |
10-77402 10 days ago |
10-76867 10 days |
| 41717 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Walk): more `transfer` API |
---
The Hamiltonian lemmas don't really need `Finite`; I'll fix this after #41435 (in whichever merges second).
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
tech debt
|
54/23 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean |
4 |
1 |
['github-actions'] |
nobody |
none |
6-39284 6 days ago |
8-36668 8 days ago |
8-36236 8 days |
| 41529 |
kebekus author:kebekus |
feat: Émile Borel's classic "Growth Lemma" |
Establish Émile Borel's classic **Growth Lemma**: if `S : ℝ → ℝ` is monotone on `Set.Ici a` and satisfies `1 ≤ S` there, then
`∀ᶠ r in volume.cofinite ⊓ atTop, S (r + (S r)⁻¹) ≤ 2 * S r`.
In other words: The inequality `S (r + (S r)⁻¹) ≤ 2 * S r` holds for all sufficiently large `r` outside an exceptional set `E` of finite Lebesgue measure. In Value Distribution Theory, this statement is central to the proof of the "Lemma on the Logarithmic Derivatives".
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
LLM-generated
|
141/0 |
Mathlib.lean,Mathlib/MeasureTheory/Function/BorelGrowth.lean,docs/references.bib |
3 |
1 |
['github-actions'] |
nobody |
none |
6-32369 6 days ago |
13-16084 13 days ago |
13-15718 13 days |
| 41684 |
kebekus author:kebekus |
feat: API for logarithmic derivatives of meromorphic functions |
Provide API for logarithmic derivatives of meromorphic functions.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
large-import
|
225/10 |
Mathlib.lean,Mathlib/Analysis/Calculus/LogDeriv.lean,Mathlib/Analysis/Meromorphic/Basic.lean,Mathlib/Analysis/Meromorphic/LogDeriv.lean,Mathlib/Analysis/Meromorphic/Order.lean,Mathlib/Analysis/SpecialFunctions/Complex/LogDeriv.lean |
6 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
6-31804 6 days ago |
6-32514 6 days ago |
8-57543 8 days |
| 41809 |
kebekus author:kebekus |
feat: Truncated Counting Function of Value Distribution Theory |
Introduce (and provide API for) the Truncated Logarithmic Counting Functions. These differ from the Logarithmic Counting Function in that they disregard pole orders and count all poles with multiplicity one. The truncated counting function is the quantity through which the Second Main Theorem of Value Distribution Theory is classically stated.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
t-analysis
LLM-generated
|
261/0 |
Mathlib.lean,Mathlib/Analysis/Complex/ValueDistribution/LogCounting/Truncated.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
6-24964 6 days ago |
6-24964 6 days ago |
6-24429 6 days |
| 41706 |
vlad902 author:vlad902 |
chore(*): fix flexible linter exceptions |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
19/56 |
Mathlib/Algebra/Ring/BooleanRing.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Formula.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Jacobian/Formula.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Projective/Formula.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/PosPart/Basic.lean,Mathlib/Analysis/SpecialFunctions/Integrability/Basic.lean,Mathlib/Combinatorics/SetFamily/FourFunctions.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Chunk.lean,Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Control/EquivFunctor/Instances.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/InformationTheory/Coding/KraftMcMillan.lean,Mathlib/NumberTheory/LucasLehmer.lean,Mathlib/NumberTheory/PythagoreanTriples.lean,Mathlib/RingTheory/Nilpotent/Exp.lean |
15 |
2 |
['github-actions', 'vlad902'] |
nobody |
none |
6-21539 6 days ago |
6-22407 6 days ago |
8-70983 8 days |
| 41762 |
felixpernegger author:felixpernegger |
chore: replace terminal `convert` with `exact` |
Replaces terminal `convert(!)` with `exact` whenever possible.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
195/192 |
Mathlib/Algebra/BigOperators/Group/List/Basic.lean,Mathlib/Algebra/Category/ModuleCat/EpiMono.lean,Mathlib/Algebra/CharP/MixedCharZero.lean,Mathlib/Algebra/DirectSum/Module.lean,Mathlib/Algebra/Group/Action/Basic.lean,Mathlib/Algebra/Group/Fin/Tuple.lean,Mathlib/Algebra/Group/Pointwise/Set/Finite.lean,Mathlib/Algebra/Module/LocalizedModule/Basic.lean,Mathlib/Algebra/Module/NatInt.lean,Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/Polynomial/AlgebraMap.lean,Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Ring/GeomSum.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Jacobian/Point.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Projective/Point.lean,Mathlib/AlgebraicGeometry/Noetherian.lean,Mathlib/AlgebraicGeometry/Properties.lean,Mathlib/AlgebraicGeometry/Spec.lean,Mathlib/Analysis/BoxIntegral/Partition/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Convolution.lean,Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/Calculus/FDeriv/ContinuousAlternatingMap.lean,Mathlib/Analysis/Calculus/FDeriv/ContinuousMultilinearMap.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/Convex/Caratheodory.lean,Mathlib/Analysis/Convex/Side.lean,Mathlib/Analysis/Convex/SpecificFunctions/Deriv.lean,Mathlib/Analysis/Fourier/AddCircle.lean,Mathlib/Analysis/FunctionalSpaces/SobolevInequality.lean,Mathlib/Analysis/Normed/Field/UnitBall.lean,Mathlib/Analysis/Normed/Lp/ProdLp.lean,Mathlib/Analysis/Normed/Lp/lpSpace.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/Orthogonality.lean,Mathlib/CategoryTheory/Abelian/Pseudoelements.lean,Mathlib/CategoryTheory/Adhesive/Basic.lean,Mathlib/CategoryTheory/Category/Basic.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/IsPullback/BicartesianSq.lean,Mathlib/CategoryTheory/Limits/Types/Coequalizers.lean,Mathlib/CategoryTheory/Localization/Opposite.lean,Mathlib/CategoryTheory/Monoidal/Internal/Module.lean,Mathlib/CategoryTheory/Monoidal/Internal/Types/Basic.lean,Mathlib/CategoryTheory/Monoidal/Internal/Types/CommGrp_.lean,Mathlib/CategoryTheory/PUnit.lean,Mathlib/CategoryTheory/PathCategory/Basic.lean,Mathlib/CategoryTheory/Sites/Types.lean,Mathlib/CategoryTheory/Subobject/Classifier/Defs.lean,Mathlib/Combinatorics/Configuration.lean,Mathlib/Combinatorics/Hindman.lean,Mathlib/Combinatorics/Nullstellensatz.lean,Mathlib/Combinatorics/SetFamily/KruskalKatona.lean,Mathlib/Combinatorics/SimpleGraph/Dart.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Chunk.lean,Mathlib/Computability/TuringMachine/ToPartrec.lean,Mathlib/Data/DFinsupp/Interval.lean,Mathlib/Data/ENNReal/Operations.lean,Mathlib/Data/Fin/Tuple/Basic.lean,Mathlib/Data/Finset/Image.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Intervals.lean,Mathlib/Data/Nat/Digits/Defs.lean,Mathlib/Data/QPF/Univariate/Basic.lean,Mathlib/Data/Sym/Basic.lean,Mathlib/FieldTheory/PrimitiveElement.lean,Mathlib/Geometry/Convex/Cone/Pointed.lean,Mathlib/Geometry/Convex/ConvexSpace/Defs.lean,Mathlib/Geometry/Euclidean/Projection.lean,Mathlib/Geometry/Manifold/ChartedSpace.lean,Mathlib/Geometry/Manifold/ContMDiff/Constructions.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/Geometry/Manifold/Sheaf/Basic.lean,Mathlib/Geometry/RingedSpace/LocallyRingedSpace/HasColimits.lean,Mathlib/Geometry/RingedSpace/OpenImmersion.lean,Mathlib/Geometry/RingedSpace/PresheafedSpace/Gluing.lean,Mathlib/GroupTheory/Finiteness.lean,Mathlib/GroupTheory/GroupAction/Quotient.lean,Mathlib/GroupTheory/Perm/Closure.lean,Mathlib/GroupTheory/Perm/Cycle/Basic.lean,Mathlib/GroupTheory/Perm/Support.lean,Mathlib/GroupTheory/Submonoid/Inverses.lean,Mathlib/LinearAlgebra/AffineSpace/AffineMap.lean,Mathlib/LinearAlgebra/AffineSpace/Centroid.lean,Mathlib/LinearAlgebra/AffineSpace/Independent.lean,Mathlib/LinearAlgebra/Dimension/LinearMap.lean,Mathlib/LinearAlgebra/Finsupp/Supported.lean,Mathlib/LinearAlgebra/Matrix/Block.lean,Mathlib/LinearAlgebra/Matrix/ToLin.lean,Mathlib/LinearAlgebra/Pi.lean,Mathlib/LinearAlgebra/PiTensorProduct/Basic.lean,Mathlib/LinearAlgebra/StdBasis.lean,Mathlib/LinearAlgebra/TensorAlgebra/Basic.lean,Mathlib/Logic/Equiv/Fin/Basic.lean,Mathlib/Logic/Equiv/Fintype.lean,Mathlib/MeasureTheory/Function/ConvergenceInDistribution.lean,Mathlib/MeasureTheory/Function/Jacobian.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/Basic.lean,Mathlib/MeasureTheory/Group/Measure.lean,Mathlib/MeasureTheory/Integral/FinMeasAdditive.lean,Mathlib/MeasureTheory/Measure/Content.lean |
152 |
15 |
['Parcly-Taxel', 'adomani', 'chenson2018', 'felixpernegger', 'github-actions', 'grunweg', 'leanprover-radar', 'mathlib-bors'] |
nobody |
none |
6-20217 6 days ago |
6-82610 6 days ago |
7-22360 7 days |
| 41616 |
JX-Mo author:JX-Mo |
refactor(RepresentationTheory): move instance Abelian (Rep k G) to Rep.Basic |
This instance removes the commutativity assumption on k in the current instance Abelian (Rep k G) in Rep.Iso. |
t-algebra
new-contributor
maintainer-merge
label:t-algebra$ |
2/2 |
Mathlib/RepresentationTheory/Rep/Basic.lean,Mathlib/RepresentationTheory/Rep/Iso.lean |
2 |
4 |
['github-actions', 'grunweg'] |
nobody |
none |
6-11515 6 days ago |
11-9130 11 days ago |
11-8595 11 days |
| 41734 |
IlPreteRosso author:IlPreteRosso |
feat(DiscreteConvolution): add ring convolution definitions and properties |
Continuation of PR #34191
Adds ring convolution and its elementary properties.
Aligns the API with [Day convolution](https://leanprover-community.github.io/mathlib4_docs/Mathlib/CategoryTheory/Monoidal/DayConvolution.html) structure. Although no idea how to bridge them right now. |
t-topology
new-contributor
|
222/5 |
Mathlib/Topology/Algebra/InfiniteSum/DiscreteConvolution.lean |
1 |
3 |
['github-actions', 'grunweg'] |
nobody |
none |
6-10842 6 days ago |
8-4969 8 days ago |
8-4434 8 days |
| 41656 |
joelriou author:joelriou |
feat(AlgebraicTopology): order relation between simplices of the nerve of a partial order |
This is applied to the characterization of the order relation between simplices of `Δ[p] ⊗ Δ[q]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
maintainer-merge
|
64/2 |
Mathlib/AlgebraicTopology/SimplicialSet/NerveNondegenerate.lean,Mathlib/AlgebraicTopology/SimplicialSet/ProdStdSimplex.lean,Mathlib/AlgebraicTopology/SimplicialSet/Subcomplex.lean |
3 |
6 |
['github-actions', 'joelriou', 'robin-carlier'] |
nobody |
none |
6-8928 6 days ago |
6-9994 6 days ago |
9-24686 9 days |
| 41703 |
plp127 author:plp127 |
perf(Condensed/Light): speedup kernel typechecking of `InternalProjectivityProof.cocone` |
Speedup kernel typechecking of `InternalProjectivityProof.cocone` in `Mathlib/Condensed/Light/Sequence.lean`. `Functor.map_comp` for `lightProfiniteToLightCondSet` holds by `rfl`, but rewriting backwards with `Functor.map_comp` explicitly in `simp` makes the subsequent `rfl` faster in the kernel because it doesn't need to unfold as much. See [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/kernelbarfing.20in.20mathlib/near/609873490).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-condensed |
2/2 |
Mathlib/Condensed/Light/Sequence.lean |
1 |
5 |
['github-actions', 'grunweg', 'leanprover-radar', 'plp127'] |
nobody |
none |
6-7806 6 days ago |
8-78380 8 days ago |
8-77845 8 days |
| 41814 |
JovanGerb author:JovanGerb |
fix(CategoryTheory/Limits/VanKampen): backport fix for lean#8883 |
This PR contains the fix that I had to make to get https://github.com/leanprover/lean4/pull/8883 working. When looking into this, I had concluded that the original proof should not have worked in the first place.
This was the only such failure that was present in mathlib.
I think having this fix will be helpful when work on the unification performance issue is resumed.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
1/1 |
Mathlib/CategoryTheory/Limits/VanKampen.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
6-6085 6 days ago |
6-7628 6 days ago |
6-7093 6 days |
| 41808 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add induction_on and relation-equalities lemmas for induced representations |
Add an `induction_on` lemma for `IndV`, suppressing `Coinvariants.induction_on` `TensorProduct.induction` `MonoidAlgebra.induction_linear`. The remaining two induction steps are extremely simple: step`mk` for elementary generators of the form `⟦h⊗a⟧=IndV.mk _ _ h a` and another step `add` for the addition induction.
Add two relation equality lemmas, describing the action coming from the source group on the induced representation.
The purpose is to help play induced representations in Mathlib as how we do in paper: prove things by using elementary generators and relations. Note that`IndV` and `IndV.mk` are abbrev's, so `simp` would expose the implementation and unfold the simpler expressions in practice. |
t-algebra
new-contributor
label:t-algebra$ |
28/0 |
Mathlib/RepresentationTheory/Induced.lean |
1 |
2 |
['github-actions'] |
nobody |
none |
6-1972 6 days ago |
6-28647 6 days ago |
6-28143 6 days |
| 29744 |
espottesmith author:espottesmith |
feat(Combinatorics): define directed hypergraphs |
This PR defines directed hypergraphs:
```
@[ext]
structure DiHypergraph (α : Type*) where
/-- The vertex set -/
vertexSet : Set α
/-- The edge set -/
edgeSet : Set ((Set α) × (Set α))
/-- Each edge is a pair (s, d), where s ⊆ vertexSet and d ⊆ vertexSet -/
edge_src_dst_isSubset_vertexSet' : ∀ ⦃e⦄, e ∈ edgeSet → e.1 ⊆ vertexSet ∧ e.2 ⊆ vertexSet
```
Additional definitions:
- tail/head stars and negative/positive stars
- some special cases (B-Graph, F-Graph, BF-Graph, and what I'm calling a "non-endless" dihypergraph, where neither the source/tail nor the destination/head are empty)
- Vertex and (hyper)edge adjacency
- isolated vertices
- empty and nonempty dihypergraphs
The design employed here is based off of #28613, but this PR does not depend on that one.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
290/0 |
Mathlib.lean,Mathlib/Combinatorics/DiHypergraph/Basic.lean |
2 |
5 |
['b-mehta', 'espottesmith', 'github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
none |
6-1742 6 days ago |
30-85150 30 days ago |
168-1963 168 days |
| 41200 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): pure morphisms |
In this PR, we define the notion of `κ`-pure morphisms (`IsCardinalPure`) in a category `C`. This class contains split monomorphisms and is stable under `κ`-filtered colimits. When `C` is a `κ`-accessible category, we show that `κ`-pure morphisms are monomorphisms.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
|
187/6 |
Mathlib.lean,Mathlib/CategoryTheory/Presentable/Basic.lean,Mathlib/CategoryTheory/Presentable/CardinalPure.lean |
3 |
16 |
['github-actions', 'joelriou', 'smorel394'] |
nobody |
none |
5-86075 5 days ago |
18-9261 18 days ago |
21-62809 21 days |
| 41821 |
Timeroot author:Timeroot |
chore(Order/Basic): add grind _=_ to Subtype.coe_lt_coe, coe_le_coe |
Add grind annotations to Subtype.coe_le_coe and Subtype.coe_lt_coe.
As noted in [this zulip thread](https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/grind.20failures/near/610812085), grind was failing to solve some fairly simple goals, and I think these are generally good annotations to have. (I think they will usually fire usefully.)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
2/2 |
Mathlib/Order/Basic.lean |
1 |
4 |
['Timeroot', 'github-actions', 'leanprover-radar'] |
nobody |
none |
5-82045 5 days ago |
6-1048 6 days ago |
6-513 6 days |
| 41794 |
ajirving author:ajirving |
style: fix by on newline |
Fixes some instances of by being on a newline or the first line of the
proof rather than the final line of the declaration (as required by
Mathlib style).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
easy |
34/33 |
Mathlib/Algebra/Homology/Factorizations/CM5a.lean,Mathlib/Algebra/SkewPolynomial/Basic.lean,Mathlib/AlgebraicTopology/SimplexCategory/GeneratorsRelations/Basic.lean,Mathlib/Analysis/InnerProductSpace/Projection/Minimal.lean,Mathlib/Analysis/InnerProductSpace/SingularValues.lean,Mathlib/CategoryTheory/Sites/Descent/DescentDataAsCoalgebra.lean,Mathlib/Geometry/Convex/Cone/Dual.lean,Mathlib/Geometry/Convex/Cone/Face/Basic.lean,Mathlib/Geometry/Euclidean/Circumcenter.lean,Mathlib/Geometry/Euclidean/Simplex.lean,Mathlib/GroupTheory/Index.lean,Mathlib/MeasureTheory/Integral/CircleAverage.lean,Mathlib/NumberTheory/LSeries/ZetaZeros.lean,Mathlib/NumberTheory/SelbergSieve.lean,Mathlib/RingTheory/Polynomial/DegreeLT.lean |
15 |
6 |
['ajirving', 'felixpernegger', 'github-actions'] |
nobody |
1 |
5-77770 5 days ago |
5-82469 5 days ago |
6-974 6 days |
| 41732 |
vaca22 author:vaca22 |
feat(RingTheory/ClassGroup): add mulEquiv_mk0 |
Add a simp lemma describing how the class-group equivalence induced by a ring equivalence acts on the class of a nonzero ideal.
The image is the class of the ideal mapped along the ring equivalence. The proof compares the corresponding fractional ideals through the existing class-group equivalence and localization membership API.
**AI disclosure**: this PR is primarily LLM-generated (Claude Code).
|
t-ring-theory
new-contributor
LLM-generated
|
43/0 |
Mathlib/RingTheory/ClassGroup/Basic.lean |
1 |
3 |
['github-actions', 'vaca22'] |
nobody |
none |
5-77133 5 days ago |
8-6007 8 days ago |
8-5472 8 days |
| 41522 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): existence of longest paths/trails/cycles/circuits |
We already have the existence of a longest path/trail. This adds:
- the existence of a longest cycle/circuit
- the existence of a longest path/trail from a specific vertex
- the existence of a longest path/trail between specific endpoints
- the existence of a longest cycle/circuit at a specific vertex
---
`exists_isTrail_forall_length_le_of_pred` is the common argument that works for any predicate on trails, which is then used to prove the 10 versions mentioned above.
I know this looks a bit ugly, but taking a longest path/trail/cycle/circuit is a useful proof technique.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
128/22 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
5-76951 5 days ago |
13-40465 13 days ago |
13-39930 13 days |
| 41542 |
tb65536 author:tb65536 |
refactor(AlgebraicGeometry/Sites/Small): golf and remove some `backward.isDefEq.respectTransparency` |
This PR golfs and removes some `backward.isDefEq.respectTransparency`. Some proofs with the help of Claude, with further golfing by myself.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
LLM-generated
|
58/134 |
Mathlib/AlgebraicGeometry/Sites/Small.lean,Mathlib/CategoryTheory/Sites/Over.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
5-68351 5 days ago |
7-48903 7 days ago |
12-66352 12 days |
| 41248 |
tb65536 author:tb65536 |
chore(NumberTheory/RamificationInertia/Basic): deprecate file |
This PR deprecates `NumberTheory/RamificationInertia/Basic.lean` in favor of `RingTheory/RamificationInertia/Basic.lean`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
t-number-theory
label:t-algebra$ |
40/6 |
Mathlib/NumberTheory/RamificationInertia/Basic.lean |
1 |
6 |
['Multramate', 'github-actions', 'grunweg', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
1 |
5-66802 5 days ago |
5-70901 5 days ago |
20-6704 20 days |
| 41830 |
Jun2M author:Jun2M |
feat(Data/PFun): add lemmas for ran, restrict, map, image and preimage |
Add missing simp / API lemmas for partial functions, and strengthen `preimage_inter`
from a subset inclusion to an equality. Also tag a few `Part` uniqueness lemmas
for `grind`.
- `Part`: `grind` attributes on `get_mem`, `mem_unique`, `mem_right_unique`
- `ran`: `ran_coe`, `ran_eq_empty_iff_dom_eq_empty`
- `restrict`: `dom_restrict`, `restrict_restrict`, `ran_restrict`, `preimage_restrict`
- `map`: `dom_map`, `mem_map`, `ran_map`, `image_map`, `preimage_map`
- `image` / `preimage`: `image_subset_ran`, `preimage_empty`,
`disjoint_preimage_of_disjoint`, plus `simp`/`gcongr` attributes
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
86/3 |
Mathlib/Data/PFun.lean,Mathlib/Data/Part.lean |
2 |
2 |
['github-actions'] |
nobody |
none |
5-66263 5 days ago |
5-70949 5 days ago |
5-70414 5 days |
| 41831 |
YaelDillies author:YaelDillies |
chore(RingTheory/TwoSidedIdeal): rid the `SMulMemClass (TwoSidedIdeal R) Rᵐᵒᵖ R` instance from its `inst` |
See https://github.com/leanprover-community/mathlib4/pull/40718#discussion_r3573863027.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
1/1 |
Mathlib/RingTheory/TwoSidedIdeal/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
5-65866 5 days ago |
5-70683 5 days ago |
5-70148 5 days |
| 41823 |
tb65536 author:tb65536 |
feat(Combinatorics/Design/Defs): definitions of combinatorial designs |
This PR adds the definitions of combinatorial designs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
141/0 |
Mathlib.lean,Mathlib/Combinatorics/Design/Defs.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
5-64644 5 days ago |
5-64699 5 days ago |
5-64165 5 days |
| 40746 |
martinwintermath author:martinwintermath |
feat(LinearAlgebra/SesquilinearForm): adding orthogonality lemmas |
Add the features proposed in #34007 to align with `PointedCone.dual`.
Other noteworthy changes:
* rename `mem_orthogonalBilin_iff` to `mem_orthogonaBilin` to align the API with `PointedCone.mem_dual`.
* generalize `orthogonal_span_singleton_eq_to_lin_ker`, and rename to `orthogonalBilin_span_singleton`.
* rename `le_orthogonalBilin_orthogonalBilin` to `IsRefl. le_orthogonalBilin_orthogonalBilin` in order to free the name for a new version that does not assume `IsRefl`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37963
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
159/17 |
Mathlib/LinearAlgebra/BilinearForm/Orthogonal.lean,Mathlib/LinearAlgebra/SesquilinearForm/Orthogonal.lean |
2 |
30 |
['github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'themathqueen'] |
nobody |
none |
5-62873 5 days ago |
10-61388 10 days ago |
20-49784 20 days |
| 41729 |
vaca22 author:vaca22 |
feat(RingTheory/DedekindDomain): add divisor group core |
Add the formal divisor group of a Dedekind domain and bundle the existing factorization API as an additive equivalence between nonzero fractional ideals and divisors.
Divisors are finitely supported integer-valued functions on height-one primes. divisor records FractionalIdeal.count, ofDivisor reconstructs a fractional ideal from prime powers, and divisorEquiv proves these operations are inverse and send ideal multiplication to divisor addition.
------------
This is the core of the earlier larger proposal. Principal divisors and weighted degrees are deliberately left for later pull requests.
**AI disclosure**: this PR is primarily LLM-generated (Claude Code).
|
t-ring-theory
new-contributor
LLM-generated
|
100/0 |
Mathlib.lean,Mathlib/RingTheory/DedekindDomain/Divisor.lean |
2 |
4 |
['github-actions', 'grunweg', 'vaca22'] |
nobody |
none |
5-60580 5 days ago |
5-60580 5 days ago |
7-57248 7 days |
| 41728 |
vaca22 author:vaca22 |
feat(GroupTheory): prove uniqueness of ℤᵐ⁰ automorphisms |
Prove that every order-preserving multiplicative automorphism of ℤᵐ⁰ is the identity. This also gives a Unique instance for its automorphism type and a Subsingleton instance for order-preserving multiplicative normalizations from G to ℤᵐ⁰.
The proof transports an automorphism through WithZero.exp and WithZero.log to an additive automorphism of ℤ, then excludes negation by monotonicity.
------------
**AI disclosure**: this PR is primarily LLM-generated (Claude Code).
|
t-group-theory
new-contributor
LLM-generated
|
61/0 |
Mathlib/GroupTheory/ArchimedeanDensely.lean |
1 |
4 |
['github-actions', 'grunweg', 'vaca22'] |
nobody |
none |
5-60550 5 days ago |
5-60556 5 days ago |
7-58181 7 days |
| 41619 |
JovanGerb author:JovanGerb |
fix(Order/Notation): unify at correct transparency in sup/inf delaborators |
This PR fixes the `sup`/`inf` delaborators to use the correct transparency when unifying instances.
I discovered this problem when using `#click_suggestions`. It has the funny property of delaborating at the reducible transparency level instead of default (which usually doesn't affect delaboration, but in this case does)
Note: we may delay this PR until the next Lean version, since it splits this transparency level. The one we will then need is the implicit transparency.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
4/4 |
Mathlib/Order/Notation.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
5-58646 5 days ago |
11-2501 11 days ago |
11-1966 11 days |
| 41810 |
YaelDillies author:YaelDillies |
feat(CategoryTheory/Concrete): generic `↧` notation for `FooCat.of` |
Following a suggestion of Andrew on [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Remove.20.60Spec.28.29.60.20notation/near/544291147).
Generated by Claude Opus based off my suggested implementation, then I rewrote the docstrings by hand.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
LLM-generated
t-meta
|
255/0 |
Mathlib.lean,Mathlib/CategoryTheory/ConcreteCategory/Basic.lean,Mathlib/CategoryTheory/ConcreteCategory/Notation.lean,MathlibTest/CategoryTheory/ConcreteCategory/Notation.lean |
4 |
13 |
['Whysoserioushah', 'YaelDillies', 'erdOne', 'github-actions'] |
nobody |
none |
5-56417 5 days ago |
5-86009 5 days ago |
6-713 6 days |
| 33157 |
wwylele author:wwylele |
feat(Combinatorics): partitions and pentagonal numbers |
We prove a corollary of pentagonal number theorem: the number of partitions with odd number of distinct parts and the number of partitions with even number of distinct parts are either equal (n is not pentagonal), or (-1)^k for the k-th pentagonal number
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #33143
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
92/0 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Partition/Basic.lean,Mathlib/Combinatorics/Enumerative/Partition/Pentagonal.lean |
3 |
8 |
['copilot-pull-request-reviewer', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
none |
5-50756 5 days ago |
5-52362 5 days ago |
5-52498 5 days |
| 41847 |
stalex444 author:stalex444 |
feat(Analysis/Matrix): tightness of Tsirelson's inequality |
This PR adds Mathlib/Analysis/Matrix/CHSH.lean, closing the "Future work" item in Mathlib/Algebra/Star/CHSH.lean (whose header is updated in this same PR; module registered via mk_all).
It constructs the explicit real-Pauli CHSH tuple in 4×4 real matrices — X⊗1, Z⊗1, and (√2)⁻¹·(1⊗(X±Z)) — and proves it's a CHSH tuple. It also shows its CHSH operator sends the Bell vector ![1,0,0,1] to √2^3 times itself (the eigenvalue the Future-work item asked for).
The PR also goes further than the request: √2^3 is the least constant bounding that operator in the Loewner order (via the scoped MatrixOrder instances + the existing tsirelson_inequality), so the constant in tsirelson_inequality cannot be improved.
Small honest caveat worth stating: the "over every algebra" corollary quantifies over Type (universe-0), since hypotheses can't quantify universes; the concrete least-constant statement is universe-free.
This Lean code was drafted with the help of AI (Claude Code). I reviewed the file; built it locally against current Mathlib master and confirmed that it compiled.
---
Questions for reviewers:
- happy to make B₀' and B₁' private if preferred
- happy to provide a ℂ-matrix version if that's more useful
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
LLM-generated
|
229/6 |
Mathlib.lean,Mathlib/Algebra/Star/CHSH.lean,Mathlib/Analysis/Matrix/CHSH.lean |
3 |
5 |
['github-actions', 'stalex444'] |
nobody |
none |
5-50577 5 days ago |
5-51194 5 days ago |
5-50659 5 days |
| 39935 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/Finite): LocallyFiniteOrder |
Adds an order-theoretic `LocallyFiniteOrder (SimpleGraph V)` instance (closed intervals are finite), distinct from the existing graph-theoretic `LocallyFinite` (vertex degrees) already in this file. The instance takes `DecidableLE` as an explicit hypothesis rather than routing through `Classical`, because per-graph `DecidableRel G.Adj` is value-dependent and cannot be a free global instance.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
Came up while writing a Möbius inversion between copy counts and induced copy counts ([WIP](https://github.com/FordUniver/mathlib4/pull/36/changes)) that sums over the closed interval `Finset.Icc G ⊤` of supergraphs. Decidability of the order plus local-finiteness of the lattice felt like a clean standalone piece to land first, before the rest of the Möbius file.
Less sure about what the conventions for declaring type class instances are in mathlib, let me know if this is not of the expected shape or should not be included at all. |
t-combinatorics |
20/0 |
Mathlib/Combinatorics/SimpleGraph/Finite.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
5-49710 5 days ago |
55-84096 55 days ago |
55-83561 55 days |
| 40204 |
Jun2M author:Jun2M |
feat(Combinatorics): incidence-based `HypergraphLike` class |
This PR introduces an alternative definition of HyperGraphLike based on incidence.
This is alternative to #36743.
See discussion at ([#graph theory > HasAdj](https://leanprover.zulipchat.com/#narrow/channel/252551-graph-theory/topic/HasAdj/with/575843445)) for more information.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
1729/2 |
Mathlib.lean,Mathlib/Combinatorics/Digraph/GraphLike.lean,Mathlib/Combinatorics/Graph/Basic.lean,Mathlib/Combinatorics/Graph/GraphLike.lean,Mathlib/Combinatorics/GraphLike/Basic.lean,Mathlib/Combinatorics/GraphLike/Walks/Basic.lean,Mathlib/Combinatorics/GraphLike/Walks/Dart.lean,Mathlib/Combinatorics/SimpleGraph/GraphLike.lean,Mathlib/Data/PFun.lean,Mathlib/Data/Part.lean |
10 |
2 |
['github-actions'] |
nobody |
none |
5-49709 5 days ago |
48-39962 48 days ago |
48-42166 48 days |
| 40197 |
plp127 author:plp127 |
feat: valuation of an algebraic element |
We prove that if `x` is algebraic over `K` then there exists some `n ≠ 0` such that the valuation of `x` raised to the `n`-th power is equal to the valuation of some element of `K`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
67/0 |
Mathlib.lean,Mathlib/RingTheory/Valuation/Algebraic.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
5-49703 5 days ago |
48-69868 48 days ago |
48-69333 48 days |
| 39829 |
or4nge19 author:or4nge19 |
feat(LinearAlgebra): basis flag lemmas and genEigenspace map |
Part 1/3 of #39139.
Introduces basis flag lemmas and intertwining `genEigenspace` map, using directly available constructors, ie introducing none (so improving on #39139)
Co-authored-by: [kuotsanhsu](https://github.com/kuotsanhsu) [learningstud@gmail.com](mailto:learningstud@gmail.com)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
76/2 |
Mathlib/LinearAlgebra/Basis/Flag.lean,Mathlib/LinearAlgebra/Eigenspace/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
5-49702 5 days ago |
57-86117 57 days ago |
57-85609 57 days |
| 40165 |
SnirBroshi author:SnirBroshi |
feat(Algebra): `iSup` of substructures equals the set-union of all finite `iSup`s |
`(⨆ i, S i).carrier = ⋃ s : Finset ι, ⨆ i ∈ s, S i` for every substructure that has `coe_iSup_of_directed`:
- `Subsemigroup`
- `Submonoid`
- `Subgroup`
- `Subsemiring`
- `Subring`
- `Subfield`
- `Submodule`
- `Subalgebra`
- `NonUnitalStarSubalgebra`
- `NonUnitalSubalgebra`
- `NonUnitalSubring`
- `NonUnitalSubsemiring`
- `StarSubalgebra`
- `IntermediateField`
Co-authored-by: Albert Smith <10266947+ChiCubed@users.noreply.github.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
136/0 |
Mathlib.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Subalgebra/Directed.lean,Mathlib/Algebra/Field/Subfield/Basic.lean,Mathlib/Algebra/Group/Subgroup/Pointwise.lean,Mathlib/Algebra/Group/Submonoid/Pointwise.lean,Mathlib/Algebra/Group/Subsemigroup/Lemmas.lean,Mathlib/Algebra/Ring/Subring/Pointwise.lean,Mathlib/Algebra/Ring/Subsemiring/Pointwise.lean,Mathlib/Algebra/Star/NonUnitalSubalgebra.lean,Mathlib/Algebra/Star/Subalgebra.lean,Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean,Mathlib/LinearAlgebra/Span/Basic.lean,Mathlib/RingTheory/NonUnitalSubring/Basic.lean,Mathlib/RingTheory/NonUnitalSubsemiring/Basic.lean |
15 |
2 |
['github-actions', 'plp127'] |
nobody |
none |
5-49699 5 days ago |
45-41107 45 days ago |
45-41228 45 days |
| 39868 |
JuanCoRo author:JuanCoRo |
feat(Algebra/Polynomial): linearity of `divByMonic` and adjacent results |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This PR adds the `R`-linearity of the monic polynomial division map `_ /ₘ q`. It also adds adjacent results that stem from this work.
#### Refactors:
- Reuses the proofs from `add_modByMonic` and `smul_modByMonic` to generalize these results to `add_div_modByMonic` and `smul_div_modByMonic` respectively.
- Replaces the proofs of `add_modByMonic` and `smul_modByMonic` as specializations of the more general theorems `add_div_modByMonic` and `smul_div_modByMonic` respectively.
#### Additions:
- Adds the necessary results for `_ /ₘ q` linearity:
- `add_divByMonic : (p₁ + p₂) /ₘ q = p₁ /ₘ q + p₂ /ₘ q`
- `smul_divByMonic : c • p /ₘ q = c • (p /ₘ q)`
- Adds `_ /ₘ q` as an `R`-linear map:
- `divByMonicHom`: definition of `_ /ₘ q` as a linear map
- `mem_ker_divByMonic`: kernel characterization for `_ /ₘ q`.
- In `Div.lean` adds dual results for `/ₘ` that were already present for `%ₘ`
- `neg_divByMonic : (-p) /ₘ q = -(p /ₘ q)`
- `sub_divByMonic : (p₁ - p₂) /ₘ q = p₁ /ₘ q - p₂ /ₘ q`
- `mul_divByMonic_assoc (hd : q ∣ p₂) : (p₁ * p₂) /ₘ q = p₁ * (p₂ /ₘ q)`
While `mul_divByMonic_assoc` is not exactly the dual of `mul_modByMonic`, I thought it wouldn't hurt to add it.
[](https://gitpod.io/from-referrer/) |
new-contributor
t-algebra
label:t-algebra$ |
54/17 |
Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Polynomial/RingDivision.lean |
2 |
8 |
['JuanCoRo', 'github-actions', 'wwylele'] |
nobody |
1 |
5-49696 5 days ago |
54-12971 54 days ago |
54-12515 54 days |
| 40081 |
xroblot author:xroblot |
chore(Algebra/Algebra/Subalgebra): lower priority of Module instance |
Lower the priority of `Subalgebra.instModuleSubtypeMem` from default (1000) to `low` (100).
This instance uses `inferInstance`, which re-triggers typeclass synthesis and can be expensive
to succeed. Lowering the priority makes it a fallback when cheaper paths are available.
Benchmark results show no regressions and meaningful speedups on several files
(up to -23% on `Mathlib.LinearAlgebra.TensorProduct.Subalgebra`).
:robot: Prepared with Claude Code |
t-algebra label:t-algebra$ |
1/1 |
Mathlib/Algebra/Algebra/Subalgebra/Basic.lean |
1 |
7 |
['github-actions', 'leanprover-radar', 'plp127', 'xroblot'] |
nobody |
none |
5-49695 5 days ago |
51-68404 51 days ago |
51-67911 51 days |
| 40155 |
TheGoedeDoel author:TheGoedeDoel |
feat: functor of localized commutative rings |
Given a functor of commutative rings R and a submonoid functor S,
we add a functor of commutative rings with objects that are localizations
of R(U) at the submonoid S(U). We also show that this functor satisfies a
universal property.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
255/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/LocalizedFunctor.lean |
2 |
14 |
['TheGoedeDoel', 'chrisflav', 'github-actions'] |
nobody |
none |
5-49694 5 days ago |
40-58635 40 days ago |
49-58144 49 days |
| 38664 |
joelriou author:joelriou |
feat(AlgebraicTopology/SimplicialSet): more API for `SSet.op` |
---
- [x] depends on: #38662
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology |
119/0 |
Mathlib/AlgebraicTopology/SimplicialSet/KanComplex/MulStruct.lean,Mathlib/AlgebraicTopology/SimplicialSet/Op.lean,Mathlib/AlgebraicTopology/SimplicialSet/StdSimplex.lean |
3 |
8 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
none |
5-49693 5 days ago |
27-10701 27 days ago |
27-10167 27 days |
| 39941 |
mkaratarakis author:mkaratarakis |
feat(Data/List): add count lemmas for duplicate detection |
## Summary
Add general list count lemmas used in the Perron–Frobenius quiver-path development:
- `List.mem_tail_of_count_ge_two`
- `List.exists_pos_get_of_dropLast_count_ge_two`
Relocated from the PF-specific file per review feedback. Proofs use upstream `List.Duplicate` API and `grind` where appropriate (per @chenson2018).
Part of the Perron–Frobenius formalization (with @or4nge19).
## Test plan
- [x] `lake build Mathlib.Data.List.Count`
- [x] `lake build Mathlib.Combinatorics.Quiver.Path.PerronFrobenius` (on integration branch)
cc @or4nge19 for review |
t-data |
24/0 |
Mathlib/Data/List/Count.lean |
1 |
3 |
['chenson2018', 'github-actions', 'mkaratarakis'] |
nobody |
none |
5-49690 5 days ago |
55-70310 55 days ago |
55-70375 55 days |
| 40005 |
tautschnig author:tautschnig |
feat(Data/ZMod/Basic): isUnit characterisation in prime power moduli |
Add two lemmas characterising units in ZMod (p^n) via divisibility of the canonical lift:
isUnit_iff_not_prime_dvd_val: for prime p and n > 0,
IsUnit x ↔ ¬ p ∣ x.val.
not_isUnit_iff_prime_dvd_val: for prime p and n > 0,
¬ IsUnit x ↔ p ∣ x.val.
These specialise the existing isUnit_iff_coprime to prime power moduli, where the coprimality condition reduces to a simple divisibility check on the unique prime factor.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
15/0 |
Mathlib/Data/ZMod/Basic.lean |
1 |
3 |
['copilot-pull-request-reviewer', 'github-actions'] |
nobody |
none |
5-49689 5 days ago |
54-24576 54 days ago |
54-24041 54 days |
| 39808 |
chenson2018 author:chenson2018 |
chore(Data): refactor proofs where `grind?` fails |
These are sources of technical debt as now reported in the [weekly linting report](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log/with/544658968). The idea is that a successful `grind` proof can fail to report the theorems it used via `grind?`, which means that if these proofs break across toolchains that it becomes significantly harder to repair.
Most of these are fixed by squeezing the call to `grind` and unsetting `linter.tacticAnalysis.verifyGrindOnly` so they no longer appear in the weekly report. Unfortunately, this can't be on by default for performance reasons, but I highly encourage using this linter when adding any `grind` proofs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
tech debt
|
69/41 |
Mathlib/Data/Bool/Basic.lean,Mathlib/Data/Bool/Set.lean,Mathlib/Data/EReal/Operations.lean,Mathlib/Data/Fin/Tuple/NatAntidiagonal.lean,Mathlib/Data/Finset/Image.lean,Mathlib/Data/Finset/Powerset.lean,Mathlib/Data/Finset/Range.lean,Mathlib/Data/Finset/SMulAntidiagonal.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Chain.lean,Mathlib/Data/List/Count.lean,Mathlib/Data/List/Cycle.lean,Mathlib/Data/List/Induction.lean,Mathlib/Data/List/ReduceOption.lean,Mathlib/Data/List/Sigma.lean,Mathlib/Data/List/Sort.lean,Mathlib/Data/List/TakeDrop.lean,Mathlib/Data/List/Triplewise.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Set/Card.lean,Mathlib/Data/Set/Disjoint.lean,Mathlib/Data/Set/Function.lean,Mathlib/Data/Set/Insert.lean,Mathlib/Data/Sum/Order.lean |
24 |
3 |
['Vierkantor', 'chenson2018', 'github-actions'] |
nobody |
none |
5-49687 5 days ago |
58-35053 58 days ago |
58-34518 58 days |
| 40590 |
BryceT233 author:BryceT233 |
feat(RingTheory/AdjoinRoot): more on `AdjoinRoot' of monic polynomials |
This PR adds some missing basic API for `AdjoinRoot p` where `p` is a monic polynomial.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
27/0 |
Mathlib/RingTheory/AdjoinRoot.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
5-44891 5 days ago |
26-40802 26 days ago |
38-23767 38 days |
| 41740 |
themathqueen author:themathqueen |
chore(Topology/Algebra/LinearMapCompletion): generalize `UniformSpace.Completion.toComplL` |
Generalize and move `toComplL` to a more appropriate file.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
(`toCompl`, `toComplL`, `toComplₗᵢ`, etc... aren't great names in my opinion, but that's a separate issue for another time)
(In another PR (maybe sometime in the near future), we should make the variables R and α explicit for `toCompl`, `toComplL`, and `toComplₗᵢ`.)
[](https://gitpod.io/from-referrer/)
|
t-topology |
26/20 |
Mathlib/Analysis/InnerProductSpace/Reproducing.lean,Mathlib/Analysis/Normed/Module/Completion.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/DistLEIntegral.lean,Mathlib/Topology/Algebra/LinearMapCompletion.lean |
4 |
3 |
['github-actions', 'mathlib-merge-conflicts', 'themathqueen'] |
nobody |
none |
5-38627 5 days ago |
5-39818 5 days ago |
7-78100 7 days |
| 41427 |
YaelDillies author:YaelDillies |
refactor(Algebra/MvPolynomial): delete `coeff` |
... without a deprecation because we want dot notation to resolve to `AddMonoidAlgebra.coeff`.
For migration, replace bare `MvPolynomial.coeff`s with `AddMonoidAlgebra.coeff`. Dot notation `.coeff` will resolve to `AddMonoidAlgebra.coeff` without further change. `MvPolynomial.coeff m p` corresponds to `AddMonoidAlgebra.coeff p m`, so you will need to swap arguments. Note further that `AddMonoidAlgebra.coeff p` is bundled as a `Finsupp` while `MvPolynomial.coeff` is a bare function.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
label:t-algebra$ |
243/245 |
Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Division.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/MvPolynomial/Eval.lean,Mathlib/Algebra/MvPolynomial/Funext.lean,Mathlib/Algebra/MvPolynomial/Monad.lean,Mathlib/Algebra/MvPolynomial/Nilpotent.lean,Mathlib/Algebra/MvPolynomial/NoZeroDivisors.lean,Mathlib/Algebra/MvPolynomial/PDeriv.lean,Mathlib/Algebra/MvPolynomial/Rename.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Combinatorics/Nullstellensatz.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/RingTheory/Extension/Generators.lean,Mathlib/RingTheory/Extension/Presentation/Basic.lean,Mathlib/RingTheory/MvPolynomial/Basic.lean,Mathlib/RingTheory/MvPolynomial/FreeCommRing.lean,Mathlib/RingTheory/MvPolynomial/Groebner.lean,Mathlib/RingTheory/MvPolynomial/Homogeneous.lean,Mathlib/RingTheory/MvPolynomial/IrreducibleQuadratic.lean,Mathlib/RingTheory/MvPolynomial/MonomialOrder.lean,Mathlib/RingTheory/MvPolynomial/WeightedHomogeneous.lean,Mathlib/RingTheory/MvPowerSeries/Basic.lean,Mathlib/RingTheory/MvPowerSeries/Trunc.lean,Mathlib/RingTheory/NoetherNormalization.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Polynomial/IsIntegral.lean,Mathlib/RingTheory/Polynomial/Quotient.lean,Mathlib/RingTheory/Spectrum/Prime/Polynomial.lean,Mathlib/RingTheory/TensorProduct/MvPolynomial.lean |
35 |
11 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
nobody |
1 |
5-33930 5 days ago |
5-35434 5 days ago |
14-5072 14 days |
| 41665 |
korbonits author:korbonits |
feat(Topology/Connected): transport path-connectedness along homeomorphisms |
Add `Homeomorph.pathConnectedSpace`, `Homeomorph.locallyPathConnectedSpace` and `Homeomorph.image_pathComponent`, completing the family alongside the existing `Homeomorph.connectedSpace` and `Homeomorph.locallyConnectedSpace`.
---
AI disclosure
- level: Level 5 / Level 6 in [the link shared](https://www.visidata.org/blog/2026/ai/#self-assessed-ai-level-for-contributions) -- I feel confident about the math but I am still learning Lean itself
- code: most of the Lean in this PR was drafted by Claude Code (statements, proofs, docstrings).
- direction and review: I chose the contribution, made the decisions, reviewed every line, and wrote all GitHub/Zulip comments.
- testing: I ran local lake build of files and lake env lean of some test files (uncommitted) |
t-topology
LLM-generated
new-contributor
|
22/0 |
Mathlib/Topology/Connected/LocallyPathConnected.lean,Mathlib/Topology/Connected/PathConnected.lean |
2 |
3 |
['github-actions', 'korbonits'] |
nobody |
none |
5-27484 5 days ago |
9-58614 9 days ago |
9-58342 9 days |
| 41661 |
korbonits author:korbonits |
feat(Topology/Connected): connected and path components of products and pi types |
Add `connectedComponent_prod/pi` and `pathComponent_prod/pi`: the (path) component of a point in a product is the product of the components of its coordinates. Also add the missing `Joined.map`, `Joined.prod`, `Joined.pi` along the way.
---
Follow-up to #40092.
AI disclosure
- level: Level 5 / Level 6 in [the link shared](https://www.visidata.org/blog/2026/ai/#self-assessed-ai-level-for-contributions) -- I feel confident about the math but I am still learning Lean itself
- code: most of the Lean in this PR was drafted by Claude Code (statements, proofs, docstrings).
- direction and review: I chose the contribution, made the decisions, reviewed every line, and wrote all GitHub/Zulip comments.
- testing: I ran local lake build of files and lake env lean of some test files (uncommitted) |
t-topology
new-contributor
LLM-generated
|
48/0 |
Mathlib/Topology/Connected/Basic.lean,Mathlib/Topology/Connected/PathConnected.lean |
2 |
5 |
['github-actions', 'grunweg', 'korbonits'] |
nobody |
none |
5-26997 5 days ago |
5-31251 5 days ago |
9-31599 9 days |
| 41835 |
pepamontero author:pepamontero |
feat: add `orbitRel.Quotient.quotient_smul_eq` and `Homeomorph.smul_symm` |
Two small, independent lemmas separated from PR #40727 (proving the orbit space inherits `IsManifold` structure), since neither depends on manifolds and both are useful on their own:
* `orbitRel.Quotient.quotient_smul_eq`: in the quotient by `MulAction.orbitRel`, `⟦g • a⟧ = ⟦a⟧` for any `g`.
* `Homeomorph.smul_symm`: the inverse of the homeomorphism `Homeomorph.smul g` is `Homeomorph.smul g⁻¹`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
8/0 |
Mathlib/GroupTheory/GroupAction/Defs.lean,Mathlib/Topology/Algebra/ConstMulAction.lean |
2 |
7 |
['felixpernegger', 'github-actions', 'pepamontero'] |
nobody |
1 |
5-19278 5 days ago |
5-21670 5 days ago |
5-29980 5 days |
| 41479 |
YaelDillies author:YaelDillies |
feat(LinearAlgebra): dual of tensor is tensor of duals for finite projective modules |
Generalise this isomorphism and many similar ones from finite free to finite projective. To be able to deduce some isos from some other ones, I had to move them around in a preliminary PR. Note that #40297 made of the changes that the current PR was intending to do but not all, hence the slightly mangled diff.
Also change the defeq of `homTensorHomEquiv` so that it is *not* defeq to `homTensorHomMap` (but would be if `homTensorHomMap` became heterobasic). This makes `BilinForm.tensorDistribEquiv` defeq to `BilinForm.tensorDistrib`.
Also tag `LinearEquiv.congrRight` with `simps` to generate some required simp lemmas.
Human generated then golfed and edited with Claude Opus, then human-edited some more.
From FLT, PersistentDecomp
Co-authored-by: Edison Xie
Co-authored-by: Andrew Yang <the.erd.one@gmail.com>
Assisted-by: Claude Opus 4.8
---
This is a cleaned up version of #21829 reopened from a fork.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
125/95 |
Mathlib/Algebra/Module/Equiv/Basic.lean,Mathlib/LinearAlgebra/BilinearForm/TensorProduct.lean,Mathlib/LinearAlgebra/Contraction.lean,Mathlib/LinearAlgebra/TensorProduct/Map.lean,Mathlib/LinearAlgebra/Trace.lean |
5 |
13 |
['Deicyde', 'Whysoserioushah', 'YaelDillies', 'erdOne', 'github-actions', 'kbuzzard', 'mathlib-merge-conflicts'] |
nobody |
1 |
5-13643 5 days ago |
5-15718 5 days ago |
8-34873 8 days |
| 41723 |
luigi-massacci author:luigi-massacci |
feat: classical distributions induced by a locally integrable function |
Analogous to the results for Tempered Distributions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
large-import
|
127/1 |
Mathlib/Analysis/Distribution/Distribution.lean,Mathlib/Analysis/Distribution/TestFunction.lean,docs/references.bib |
3 |
1 |
['github-actions'] |
nobody |
none |
5-13188 5 days ago |
8-19034 8 days ago |
8-18775 8 days |
| 40724 |
justus-springer author:justus-springer |
feat(Analysis/InnerProductSpace): inner products on exterior powers |
Given a real inner product space `E`, we construct a canonical inner product on `⋀[ℝ]^n E` via the Gram determinant formula: on decomposable elements, `⟪v₁ ∧ ⋯ ∧ vₙ, w₁ ∧ ⋯ ∧ wₙ⟫ = det (⟪vⱼ, wᵢ⟫)ᵢⱼ`.
There are two generalizations of this construction: Going from `ℝ` to `RCLike`, and getting rid of the `FiniteDimensional` assumption. Both would require some prerequisites, hence they are left as future work for now (see the future work section of the module docstring).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
168/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/ExteriorPower.lean,Mathlib/Analysis/InnerProductSpace/GramMatrix.lean |
3 |
2 |
['github-actions', 'mckoen'] |
nobody |
1 |
5-12845 5 days ago |
34-7810 34 days ago |
34-8130 34 days |
| 41856 |
Ruizsolveall author:Ruizsolveall |
feat(Topology/Covering): fundamental group of the circle is ℤ |
This is the promised follow-up to #40947 (see [Zulip](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/How.20to.20wisely.20state.20Homotopy.20lifting.20lemma)); most of the file is the computation that the loop `t ↦ n • t` is sent to `n : ℤ`.
---
I used Claude to navigate the quotient covering map API and for an initial frame of the proofs, which I then reworked; I understand and can vouch for all of it.
|
t-topology
new-contributor
|
102/0 |
Mathlib.lean,Mathlib/Topology/Covering/FundamentalGroupCircle.lean |
2 |
2 |
['github-actions'] |
nobody |
none |
5-12077 5 days ago |
5-13351 5 days ago |
5-12920 5 days |
| 41243 |
dependabot author:dependabot |
chore(deps): bump GrantBirki/comment from 3.0.0 to 3.0.3 in /.github/workflows in the actions-version-updates group across 1 directory |
Bumps the actions-version-updates group with 1 update in the /.github/workflows directory: [GrantBirki/comment](https://github.com/grantbirki/comment).
Updates `GrantBirki/comment` from 3.0.0 to 3.0.3
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/grantbirki/comment/releases">GrantBirki/comment's releases</a>.</em></p>
<blockquote>
<h2>v3.0.3</h2>
<h2>What's Changed</h2>
<ul>
<li>Add release bundle attestations by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/48">GrantBirki/comment#48</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.3">https://github.com/GrantBirki/comment/compare/v3...v3.0.3</a></p>
<h2>v3.0.2</h2>
<h2>What's Changed</h2>
<ul>
<li>Bump version to v3.0.2 by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/47">GrantBirki/comment#47</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.2">https://github.com/GrantBirki/comment/compare/v3...v3.0.2</a></p>
<h2>v3.0.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Add dependency cooldowns by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/37">GrantBirki/comment#37</a></li>
<li>Bump actions/upload-artifact from 6.0.0 to 7.0.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/38">GrantBirki/comment#38</a></li>
<li>Bump actions/upload-artifact from 7.0.0 to 7.0.1 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/39">GrantBirki/comment#39</a></li>
<li>Bump esbuild from 0.27.7 to 0.28.1 in the npm_and_yarn group across 1 directory by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/40">GrantBirki/comment#40</a></li>
<li>Fix template variable documentation by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/41">GrantBirki/comment#41</a></li>
<li>Reduce npm dependency surface by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/45">GrantBirki/comment#45</a></li>
<li>Add versioned release automation by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/46">GrantBirki/comment#46</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.1">https://github.com/GrantBirki/comment/compare/v3...v3.0.1</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/GrantBirki/comment/commit/937820f3623fd0e300294bcc64ac7577fc0ad4cc"><code>937820f</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/48">#48</a> from GrantBirki/add-release-attestations</li>
<li><a href="https://github.com/GrantBirki/comment/commit/56617234d3c8c5bcb92b2ac851cc4925e3034254"><code>5661723</code></a> Bump version to v3.0.3</li>
<li><a href="https://github.com/GrantBirki/comment/commit/245ea8def6a8b8cd42098a154250be7098f4c97f"><code>245ea8d</code></a> Add release bundle attestations</li>
<li><a href="https://github.com/GrantBirki/comment/commit/93a7ff5a297b609ea35b67866cc3459676d2aba1"><code>93a7ff5</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/47">#47</a> from GrantBirki/bump-v3.0.2</li>
<li><a href="https://github.com/GrantBirki/comment/commit/44e0f6fce3957b6ba32ea1b28c2885c288723f4b"><code>44e0f6f</code></a> Bump version to v3.0.2</li>
<li><a href="https://github.com/GrantBirki/comment/commit/b23dd77391cf0a2538e898a73169eac9c1a6a6ff"><code>b23dd77</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/46">#46</a> from GrantBirki/versioned-auto-release</li>
<li><a href="https://github.com/GrantBirki/comment/commit/53e38fc3816c5a0ab34974efe7e26772fa504e39"><code>53e38fc</code></a> Make release workflow reruns resumable</li>
<li><a href="https://github.com/GrantBirki/comment/commit/b95b12a9f0e8d416e4dee45b1247c2ffa0d80f6b"><code>b95b12a</code></a> Disable persisted checkout credentials</li>
<li><a href="https://github.com/GrantBirki/comment/commit/a56acd4048fa2bfef519dbbc7b9f91cfceca3818"><code>a56acd4</code></a> Remove release workflow npm cache</li>
<li><a href="https://github.com/GrantBirki/comment/commit/f802ba8fc0cb98597304197afcbb85edd6d438a7"><code>f802ba8</code></a> Rename action version export</li>
<li>Additional commits viewable in <a href="https://github.com/grantbirki/comment/compare/3439715f0cf3b8fc29bf47be0e3226679c06c41a...937820f3623fd0e300294bcc64ac7577fc0ad4cc">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions
</details> |
dependencies
github_actions
CI
maintainer-merge
|
2/2 |
.github/workflows/build_template.yml,.github/workflows/maintainer_merge_wf_run.yml |
2 |
3 |
['github-actions', 'joneugster'] |
nobody |
none |
5-5158 5 days ago |
21-3136 21 days ago |
21-2601 21 days |
| 41845 |
tb65536 author:tb65536 |
chore(GroupTheory/GroupAction/Defs): remove duplicate subgroup action instances |
This PR removes a few duplicate subgroup action instances.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
0/9 |
Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/GroupTheory/GroupAction/Defs.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
5-4751 5 days ago |
5-52546 5 days ago |
5-52012 5 days |
| 41498 |
pepamontero author:pepamontero |
feat(Analysis/SpecificLimits/Normed): the sum ∑' n, n ^ k * r ^ n via Stirling numbers |
For `‖r‖ < 1`, compute `∑' n : ℕ, n ^ k * r ^ n` as the finite sum `∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j / (1 - r) ^ (j + 1)`, where `S(k, j)` are the Stirling numbers of the second kind.
**Motivation:** a special case of `tsum_sq_mul_geometric_of_norm_lt_one` over `ℂ` was proved in the FLT project and is generalized here to match the surrounding Mathlib API; the private FLT lemma can then be replaced by this one.
**Main additions to `Normed.lean`:**
- The general power formula:
- `hasSum_pow_mul_geometric_of_norm_lt_one'` / `tsum_pow_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n ^ k * r ^ n = ∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_pow_mul_geometric_of_norm_lt_one` / `tsum_pow_mul_geometric_of_norm_lt_one`: the same in a field, with `/ (1 - r) ^ (j + 1)`.
- The `descFactorial` special case that supplies each term of that sum:
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one'` / `tsum_descFactorial_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n.descFactorial j * r ^ n = j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one` / `tsum_descFactorial_mul_geometric_of_norm_lt_one`: the field versions, with `/ (1 - r) ^ (j + 1)`.
**Additions to other files:**
- `Combinatorics/Enumerative/Stirling.lean`: `Nat.pow_eq_sum_stirlingSecond_mul_descFactorial`, expressing every power `n ^ k` as a linear combination `n ^ k = ∑ j ∈ range (k + 1), stirlingSecond k j * n.descFactorial j`.
- `Data/Nat/Factorial/Basic.lean`: `Nat.descFactorial_mul_self`, the identity `n.descFactorial j * n = n.descFactorial (j + 1) + j * n.descFactorial j`, used in the induction proving the Stirling result above.
**Other changes:**
- `summable_pow_mul_geometric_of_norm_lt_one` (statement unchanged) is now a one-line consequence of the general formula; its previous proof via `ascPochhammer` is deleted, so the `RingTheory.Polynomial.Pochhammer` import is no longer needed.
- The statement of `summable_descFactorial_mul_geometric_of_norm_lt_one` changes from the shifted summand `(n + k).descFactorial k * r ^ n` to `n.descFactorial k * r ^ n`, to match the new `hasSum`/`tsum` lemmas. It had no other uses in Mathlib, and the shifted form is recoverable in one line from `summable_choose_mul_geometric_of_norm_lt_one`.
- The proof of `hasSum_coe_mul_geometric_of_norm_lt_one'` (`k = 1`) is simplified using the general formula, and the `k = 2` case is added: `∑' n, n ^ 2 * r ^ n = r * (1 + r) / (1 - r) ^ 3` (`hasSum_sq_mul_geometric_of_norm_lt_one'` and the three companion lemmas).
**Note**: redundant imports no longer needed because of changes to the code have not been removed yet since at least 5 other files depend on these as transitive imports.
**AI Disclosure**: this code originated in the FLT project, where an initial version was written by William Coram and Samuel Yin with AI assistance (Claude, later cleaned up with Codex). It has since been substantially rewritten for this PR; little of the original generated code remains.
Co-authored-by: Malhar A. Patel <142735852+Mal-Pat@users.noreply.github.com>
Co-authored-by: William Coram
Co-authored-by: Samuel Yin
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
t-analysis
maintainer-merge
|
195/83 |
Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/SpecialFunctions/OrdinaryHypergeometric.lean,Mathlib/Analysis/SpecialFunctions/Pochhammer.lean,Mathlib/Analysis/SpecialFunctions/PolynomialExp.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Basic.lean,Mathlib/Analysis/SpecificLimits/Normed.lean,Mathlib/Combinatorics/Enumerative/Stirling.lean,Mathlib/Data/Nat/Factorial/Basic.lean,Mathlib/InformationTheory/Coding/KraftMcMillan.lean,Mathlib/Topology/Instances/CantorSet.lean |
11 |
34 |
['Mal-Pat', 'YaelDillies', 'github-actions', 'grunweg', 'pepamontero'] |
nobody |
1 |
5-4621 5 days ago |
5-65625 5 days ago |
11-1640 11 days |
| 41850 |
YaelDillies author:YaelDillies |
chore(Data): move `IsStrictOrderedRing ℚ≥0` to `Algebra.Order` |
I need this in a later PR.
Also take the opportunity to use `deriving` for two out of the three instances.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-order
label:t-algebra$ |
49/26 |
Mathlib.lean,Mathlib/Algebra/Order/Ring/NNRat.lean,Mathlib/Algebra/Order/Ring/Rat.lean,Mathlib/Combinatorics/SetFamily/LYM.lean,Mathlib/Data/Finset/Density.lean,Mathlib/Data/NNRat/Floor.lean,Mathlib/Data/NNRat/Order.lean,Mathlib/Data/Rat/Star.lean,Mathlib/RingTheory/Binomial.lean,Mathlib/Topology/Instances/Rat.lean |
10 |
10 |
['YaelDillies', 'b-mehta', 'github-actions', 'grunweg', 'mathlib-bors'] |
nobody |
none |
5-893 5 days ago |
5-2419 5 days ago |
5-24903 5 days |
| 32294 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Angle/Incenter): distance from second intersection with circumcircle |
Add the following lemma: given a triangle ABC, suppose an angle bisector from A through the incenter or excenter I meets the circumcircle again at X (including the case of an external bisector at A tangent to the circle, in which case X = A). Then XB = XI (= XC, by applying this lemma again). This is a standard configuration: https://en.wikipedia.org/wiki/Incenter%E2%80%93excenter_lemma
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #30981
- [ ] depends on: #30982
- [ ] depends on: #32019
- [ ] depends on: #32021
- [ ] depends on: #32023
- [ ] depends on: #32270
- [ ] depends on: #32290
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
214/0 |
Mathlib/Geometry/Euclidean/Angle/Incenter.lean |
1 |
13 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'peakpoint'] |
nobody |
none |
4-85709 4 days ago |
19-15170 19 days ago |
116-71124 116 days |
| 41222 |
felixpernegger author:felixpernegger |
chore: remove many redundant imports |
This PR removes (all) imports of the following form:
Suppose A (directly) imports B and (directly) C and B imports (transitively) C. Then this PR removes C from the imports of A.
This is done with both public and private imports, "public meta" and "import all" are excluded, as well as imports with "--lake shake keep" and MathlibTest.
Critically, this PR should not change what is available in each file. (One can go beyond that but this requires more fixing then)
(I am also aware of `lake shake --fix` but that adds 150k lines of code)
All in all this PR removes about 14% of all imports
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
1/3891 |
Mathlib/Algebra/AffineMonoid/Embedding.lean,Mathlib/Algebra/Algebra/Basic.lean,Mathlib/Algebra/Algebra/Epi.lean,Mathlib/Algebra/Algebra/IsSimpleRing.lean,Mathlib/Algebra/Algebra/NonUnitalHom.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Opposite.lean,Mathlib/Algebra/Algebra/Pi.lean,Mathlib/Algebra/Algebra/Prod.lean,Mathlib/Algebra/Algebra/Spectrum/Pi.lean,Mathlib/Algebra/Algebra/StrictPositivity.lean,Mathlib/Algebra/Algebra/Subalgebra/Directed.lean,Mathlib/Algebra/Algebra/Subalgebra/Matrix.lean,Mathlib/Algebra/Algebra/Subalgebra/Rank.lean,Mathlib/Algebra/Algebra/Unitization.lean,Mathlib/Algebra/Azumaya/Basic.lean,Mathlib/Algebra/BigOperators/Expect.lean,Mathlib/Algebra/BigOperators/Field.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/BigOperators/Group/Finset/Defs.lean,Mathlib/Algebra/BigOperators/Group/List/Basic.lean,Mathlib/Algebra/BigOperators/Group/List/Lemmas.lean,Mathlib/Algebra/BigOperators/GroupWithZero/Action.lean,Mathlib/Algebra/BigOperators/Pi.lean,Mathlib/Algebra/BigOperators/Ring/List.lean,Mathlib/Algebra/BigOperators/Ring/Multiset.lean,Mathlib/Algebra/BigOperators/Sym.lean,Mathlib/Algebra/Category/AlgCat/Basic.lean,Mathlib/Algebra/Category/AlgCat/Limits.lean,Mathlib/Algebra/Category/AlgCat/Monoidal.lean,Mathlib/Algebra/Category/CoalgCat/ComonEquivalence.lean,Mathlib/Algebra/Category/CoalgCat/Monoidal.lean,Mathlib/Algebra/Category/FGModuleCat/EssentiallySmall.lean,Mathlib/Algebra/Category/Grp/Abelian.lean,Mathlib/Algebra/Category/Grp/Biproducts.lean,Mathlib/Algebra/Category/Grp/EnoughInjectives.lean,Mathlib/Algebra/Category/Grp/EpiMono.lean,Mathlib/Algebra/Category/Grp/ForgetCorepresentable.lean,Mathlib/Algebra/Category/Grp/Images.lean,Mathlib/Algebra/Category/Grp/IsFinite.lean,Mathlib/Algebra/Category/Grp/Kernels.lean,Mathlib/Algebra/Category/Grp/LargeColimits.lean,Mathlib/Algebra/Category/Grp/Limits.lean,Mathlib/Algebra/Category/Grp/Ulift.lean,Mathlib/Algebra/Category/ModuleCat/AB.lean,Mathlib/Algebra/Category/ModuleCat/Abelian.lean,Mathlib/Algebra/Category/ModuleCat/Algebra.lean,Mathlib/Algebra/Category/ModuleCat/Biproducts.lean,Mathlib/Algebra/Category/ModuleCat/ChangeOfRingsExact.lean,Mathlib/Algebra/Category/ModuleCat/Colimits.lean,Mathlib/Algebra/Category/ModuleCat/Ext/Finite.lean,Mathlib/Algebra/Category/ModuleCat/Images.lean,Mathlib/Algebra/Category/ModuleCat/Localization.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Abelian.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/ChangeOfRings.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Colimits.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Generator.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Sheafify.lean,Mathlib/Algebra/Category/ModuleCat/Products.lean,Mathlib/Algebra/Category/ModuleCat/Projective.lean,Mathlib/Algebra/Category/ModuleCat/ProjectiveDimension.lean,Mathlib/Algebra/Category/ModuleCat/Pseudofunctor.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/ChangeOfRings.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Localization.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/PullbackFree.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/PushforwardContinuous.lean,Mathlib/Algebra/Category/ModuleCat/Subobject.lean,Mathlib/Algebra/Category/MonCat/Basic.lean,Mathlib/Algebra/Category/MonCat/Colimits.lean,Mathlib/Algebra/Category/Ring/Epi.lean,Mathlib/Algebra/Category/Ring/EqualizerPushout.lean,Mathlib/Algebra/Category/Ring/Small.lean,Mathlib/Algebra/Category/Ring/Topology.lean,Mathlib/Algebra/Category/Ring/Under/Basic.lean,Mathlib/Algebra/Category/Semigrp/Basic.lean,Mathlib/Algebra/CharP/Algebra.lean,Mathlib/Algebra/CharP/Invertible.lean,Mathlib/Algebra/CharZero/AddMonoidHom.lean,Mathlib/Algebra/Colimit/DirectLimit.lean,Mathlib/Algebra/Colimit/Module.lean,Mathlib/Algebra/Colimit/Ring.lean,Mathlib/Algebra/ContinuedFractions/Computation/ApproximationCorollaries.lean,Mathlib/Algebra/ContinuedFractions/Computation/Approximations.lean,Mathlib/Algebra/ContinuedFractions/Computation/CorrectnessTerminating.lean,Mathlib/Algebra/ContinuedFractions/Computation/TerminatesIffRat.lean,Mathlib/Algebra/ContinuedFractions/Translations.lean,Mathlib/Algebra/DirectSum/Algebra.lean,Mathlib/Algebra/DirectSum/Basic.lean,Mathlib/Algebra/DirectSum/Decomposition.lean,Mathlib/Algebra/DirectSum/Finsupp.lean,Mathlib/Algebra/DirectSum/LinearMap.lean,Mathlib/Algebra/Divisibility/Prod.lean,Mathlib/Algebra/Exact/Basic.lean,Mathlib/Algebra/Exact/Sequence.lean,Mathlib/Algebra/Field/Basic.lean,Mathlib/Algebra/Field/ModEq.lean,Mathlib/Algebra/Field/NegOnePow.lean |
2557 |
39 |
['felixpernegger', 'github-actions', 'grunweg', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
none |
4-85517 4 days ago |
5-2523 5 days ago |
11-4512 11 days |
| 41120 |
teorth author:teorth |
feat(Analysis/SpecialFunctions/Gamma/Deriv,NumberTheory/Harmonic/GammaDeriv): formulae for the derivative of Gamma / eulerMascheroni |
Some integral representations of the derivative of the Gamma function, or the Euler-Mascheroni constant, focusing on the real form of the Gamma function rather than the complex one (as formulae for the latter are already present).
---
The initial code was human generated; an AI agent was used to help proofread and refactor the code subsequently.
- [x] depends on: #41119
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
86/8 |
Mathlib/Analysis/SpecialFunctions/Gamma/Deriv.lean,Mathlib/NumberTheory/Harmonic/GammaDeriv.lean |
2 |
6 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
none |
4-80914 4 days ago |
4-83545 4 days ago |
5-65152 5 days |
| 41863 |
scholzhannah author:scholzhannah |
chore(Order/Filter/Extr): rename various lemmas |
Per the mathlib naming conventions
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
95/61 |
Mathlib/Analysis/Calculus/LocalExtr/LineDeriv.lean,Mathlib/Analysis/Complex/AbsMax.lean,Mathlib/Order/Filter/Extr.lean,Mathlib/Topology/Order/LocalExtr.lean,Mathlib/Topology/Order/Rolle.lean |
5 |
2 |
['github-actions'] |
nobody |
none |
4-80075 4 days ago |
4-80122 4 days ago |
4-79595 4 days |
| 41865 |
scholzhannah author:scholzhannah |
chore(Topology/Order/LocalExtr): rename several theorems |
Per the mathlib naming conventions. Also discussed on Zulip [#mathlib4 > Renaming `IsLocalMin.on` and `IsMinOn.localize`](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Renaming.20.60IsLocalMin.2Eon.60.20and.20.60IsMinOn.2Elocalize.60/with/611258354).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
40/21 |
Mathlib/Analysis/Calculus/Darboux.lean,Mathlib/Analysis/Calculus/LocalExtr/Basic.lean,Mathlib/Analysis/Convex/Extrema.lean,Mathlib/Analysis/InnerProductSpace/Rayleigh.lean,Mathlib/Topology/Order/LocalExtr.lean |
5 |
1 |
['github-actions'] |
nobody |
none |
4-79370 4 days ago |
4-79424 4 days ago |
4-78899 4 days |
| 41861 |
stalex444 author:stalex444 |
feat(Algebra/Order/Floor): floor-of-sum dichotomy via fractional parts |
This PR adds four lemmas in Mathlib/Algebra/Order/Floor/Ring.lean, placed in the fractional-part section, complementing the existing one-sided bounds le_floor_add and le_floor_add_floor.
Here are the lemmas:
* floor_add_eq — writes ⌊a + b⌋ exactly as ⌊a⌋ + ⌊b⌋ + ⌊fract a + fract b⌋
* floor_add_eq_add_iff — the floors add exactly ⟺ the fractional parts sum below 1
* floor_add_eq_add_add_one_iff — the +1 case ⟺ the fractional parts sum to at least 1
* floor_add_eq_or — the dichotomy: it's always one or the other
The library has the two inequalities but not the exact case analysis, and this closes that small gap. In addition, these are the lemmas for the mechanical/Beatty-word development proposed here --https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Sturmian.20.28mechanical.29.20words/near/610836902.
Claude helped draft the Lean code; I reviewed the code, built the module locally, and it compiled.
---
I'm flexible on the lemma names should reviewers prefer different forms
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
new-contributor
label:t-algebra$ |
25/0 |
Mathlib/Algebra/Order/Floor/Ring.lean |
1 |
5 |
['BoltonBailey', 'github-actions', 'stalex444'] |
nobody |
1 |
4-73919 4 days ago |
4-73919 4 days ago |
4-82958 4 days |
| 41864 |
kebekus author:kebekus |
feat: estimate for logarithmic counting functions |
In preparation to the proof of the "Lemma of Logarithmic Derivatives" of Value Distribution Theory, establish the standard "Counting Estimate" for the logarithmic counting function. Simplify and streamline the API for restrictions of divisors a little.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
LLM-generated
|
124/15 |
Mathlib/Analysis/Complex/ValueDistribution/FirstMainTheorem.lean,Mathlib/Analysis/Complex/ValueDistribution/LogCounting/Basic.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
4-73425 4 days ago |
4-73425 4 days ago |
4-72890 4 days |
| 41685 |
plp127 author:plp127 |
feat: free modular lattice on three generators |
We define `FreeModLatThree`, the free modular lattice on three generators, as an inductive type and prove the universal property.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
t-data
|
587/0 |
Mathlib.lean,Mathlib/Data/FreeModLatThree.lean |
2 |
6 |
['alreadydone', 'github-actions', 'plp127'] |
nobody |
none |
4-67867 4 days ago |
4-67867 4 days ago |
8-4753 8 days |
| 41872 |
plp127 author:plp127 |
chore(NumberTheory/Niven): generalize theorems |
Move some theorems out of the Niven's theorem file and generalize them.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
31/19 |
Mathlib/NumberTheory/Niven.lean,Mathlib/RingTheory/IntegralClosure/IsIntegral/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean,Mathlib/RingTheory/Polynomial/RationalRoot.lean |
4 |
1 |
['github-actions'] |
nobody |
none |
4-66287 4 days ago |
4-67433 4 days ago |
4-67090 4 days |
| 41871 |
stalex444 author:stalex444 |
feat(RingTheory/IntegralClosure): integer powers of integral elements are integral |
This PR adds IsIntegral.zpow and its subalgebra-membership analogs (zpow_mem, zpow_mem_adjoin, Algebra.IsIntegral.zpow_mem), generalizing the existing inv lemmas from the −1 power to all integer powers.
This Lean code was drafted with the help of AI (Claude Code), I reviewed it and built it locally against the current master.
---
Happy to adjust the placement or the type-variable names.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
LLM-generated
new-contributor
|
20/0 |
Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean |
1 |
9 |
['SnirBroshi', 'github-actions', 'stalex444'] |
nobody |
none |
4-65068 4 days ago |
4-72855 4 days ago |
4-72320 4 days |
| 41874 |
b-mehta author:b-mehta |
chore(Order/Antidiag/Pi): review API and remove backward options |
This PR golfs some proofs, removes local notation (which means the theorem displays more nicely in Loogle + docs), and removes some `set_option backward.isDefEq.respectTransparency.types false in`.
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
13/26 |
Mathlib/Algebra/Order/Antidiag/Pi.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
4-64138 4 days ago |
4-65590 4 days ago |
4-65055 4 days |
| 41813 |
sqrt-of-2 author:sqrt-of-2 |
feat(LinearAlgebra): totally nonnegative matrices |
Define totally nonnegative matrices and add a basic API.
A matrix is totally nonnegative if all its finite minors have nonnegative determinant.
From RealRooted
Co-authored-by: Yaël Dillies <yael.dillies@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
115/1 |
Mathlib.lean,Mathlib/Data/Set/Finite/Range.lean,Mathlib/LinearAlgebra/Matrix/Determinant/TotallyNonneg.lean,Mathlib/Order/Hom/Set.lean |
4 |
17 |
['Vierkantor', 'YaelDillies', 'github-actions', 'sqrt-of-2', 'vlad902'] |
nobody |
1 |
4-58901 4 days ago |
4-61776 4 days ago |
4-70836 4 days |
| 40624 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Finite): `Set.ncard` of `neighborSet` |
Since #39414 the simpNF of the cardinality of `neighborSet` uses `Set.ncard` rather than `Fintype.card`, therefore we import `Set.ncard` into `SimpleGraph/Finite.lean` and show `(G.neighborSet v).ncard = G.degree v`.
Also includes some other results that benefit from the import/lemma:
- `(commonNeighbors ⊤ u v).encard = ENat.card V - 2`
- `(G.map f).degree (f v) = G.degree v` for an injective `f`
- `G'.degree (f v) = G.degree v` for `f : G ↪g G'`, given `G'.neighborSet (f v) ⊆ Set.range f`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
|
44/7 |
Mathlib/Combinatorics/SimpleGraph/Finite.lean,Mathlib/Combinatorics/SimpleGraph/IncMatrix.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
4-54960 4 days ago |
37-14864 37 days ago |
37-14329 37 days |
| 41611 |
SnirBroshi author:SnirBroshi |
chore(Data/Seq/Computation): golf using `grind` |
---
- `LiftRel.refl`: ? to 12ms
- `LiftRel.symm`: 10ms to 16ms
- `LiftRel.trans`: 13ms to 23ms
- `LiftRel.imp`: 11ms to 19ms
- `terminates_of_liftRel`: 14ms to 14ms
- `rel_of_liftRel`: 11ms to 15ms
- `liftRel_of_mem`: ? to 22ms
- `liftRel_def`: 20ms to 60ms
- `liftRel_bind`: 40ms to 55ms
- `liftRel_pure_left`: 15ms to 33ms
- `liftRel_think_left`: ? to 40ms
- `liftRel_congr`: ? to 35ms
- `LiftRelAux.ret_left`: 18ms to 18ms
(the question marks mean that `trace.profiler` doesn't output anything, maybe they're below 1ms?)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
28/85 |
Mathlib/Data/Seq/Computation.lean |
1 |
5 |
['SnirBroshi', 'github-actions', 'grunweg', 'leanprover-radar'] |
nobody |
none |
4-52474 4 days ago |
4-54025 4 days ago |
5-3694 5 days |
| 38380 |
wrenna-robson author:wrenna-robson |
feat(Data/Set): add `Set.diag` |
Introduces `Set.diag (s : Set α) : Set (α × α) = {(a, a) | a ∈ s}` as the set-level companion to `Set.offDiag`, mirroring the existing `Finset.diag` / `Finset.offDiag` pairing. The type-level `Set.diagonal : Type* → Set (α × α)` is retained unchanged; `diag_univ : (univ : Set α).diag = diagonal α` (`@[simp]`) keeps it canonical when the underlying set is `univ`.
Parallels to the existing `offDiag` API (`diag_mono`, `diag_nonempty`, `diag_eq_empty`, `diag_empty`, `diag_singleton`, `diag_subset_prod`, `diag_eq_sep_prod`, `diag_inter`, `diag_union`, `diag_insert`) plus bridges `diag_union_offDiag`, `disjoint_diag_offDiag`, `prod_sdiff_diag`, `prod_sdiff_offDiag`. Also `diag_eq_image`, `image_diag` (matching `Finset.image_diag`), `preimage_coe_coe_diag`, and `Finset.coe_diag`. Note `diag_union` and `diag_insert` are unconditional (no `Disjoint` / `a ∉ s` hypothesis).
To free the `diag_` prefix for the set sense, the existing lemmas about the diagonal *map* `fun x => (x, x)` are renamed with deprecation aliases:
`range_diag` → `range_diagMap`, `diag_preimage_prod` → `diagMap_preimage_prod`, `diag_preimage_prod_self` → `diagMap_preimage_prod_self`. `diag_image` and `preimage_coe_coe_diagonal` are marked `@[deprecated]`.
This PR was prepared with the assistance of Claude Opus. |
t-data
LLM-generated
|
117/20 |
Mathlib/Data/Finset/Prod.lean,Mathlib/Data/Set/Operations.lean,Mathlib/Data/Set/Prod.lean,Mathlib/MeasureTheory/MeasurableSpace/Constructions.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Compactness/Lindelof.lean,Mathlib/Topology/MetricSpace/Infsep.lean,Mathlib/Topology/NhdsSet.lean |
8 |
3 |
['github-actions', 'wrenna-robson'] |
nobody |
none |
4-49711 4 days ago |
26-26045 26 days ago |
90-19110 90 days |
| 41877 |
BoltonBailey author:BoltonBailey |
feat(Algebra/Order/Floor/Ring): `positivity` for `Int.fract` |
This PR adds a positivity extension for `Int.fract`, which is always nonnegative.
I used Claude Code to prepare this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
t-meta
label:t-algebra$ |
16/0 |
Mathlib/Algebra/Order/Floor/Ring.lean,MathlibTest/positivity.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
4-49479 4 days ago |
4-51205 4 days ago |
4-51713 4 days |
| 41536 |
Mathias-Stout author:Mathias-Stout |
chore(Algebra): make quaternion directory |
We create separate directory for quaternions and move the two existing files into it.
This prepares a follow-up PR proving that quaternions are central simple.
Co-authored-by: Justus Springer <justusspringer@gmx.de>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
file-removed
new-contributor
|
7/7 |
Mathlib.lean,Mathlib/Algebra/DualQuaternion.lean,Mathlib/Algebra/Quaternion/Basic.lean,Mathlib/Algebra/Quaternion/Basis.lean,Mathlib/Analysis/Quaternion.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Equivs.lean,MathlibTest/Quaternion.lean |
7 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
4-46913 4 days ago |
4-47731 4 days ago |
12-6230 12 days |
| 41649 |
xroblot author:xroblot |
feat(FieldTheory/IntermediateField): adjoining a shifted or scaled generator |
Add two lemmas about simple intermediate field extensions:
* `IntermediateField.adjoin_simple_add_algebraMap`: `F⟮x + algebraMap F E y⟯ = F⟮x⟯` for `y` in the base field `F`.
* `IntermediateField.adjoin_simple_mul_algebraMap`: `F⟮x * algebraMap F E y⟯ = F⟮x⟯` for `y` a nonzero element of `F`.
Translating the generator by a base-field element, or scaling it by a nonzero base-field element, leaves the simple extension unchanged.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
21/0 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
4-44127 4 days ago |
10-7272 10 days ago |
10-6737 10 days |
| 40636 |
xroblot author:xroblot |
feat(RingTheory/FractionalIdeal): IsMulTorsionFree instance |
- Adds `FractionalIdeal.isMulTorsionFree_of_le_nonZeroDivisors`: if `S ≤ R⁰` and `[IsMulTorsionFree (Ideal R)]`, then `IsMulTorsionFree (FractionalIdeal S P)`.
- Derives `FractionalIdeal.instIsMulTorsionFree` for the fraction field case (`S = R⁰`).
Also adds a discoverability note in `DedekindDomain/Ideal/Basic.lean` pointing to `Mathlib.Algebra.GroupWithZero.Torsion` for the `IsMulTorsionFree (Ideal A)` instance (hence also `IsMulTorsionFree (FractionalIdeal A⁰ K)`).
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-ring-theory |
44/0 |
Mathlib/RingTheory/DedekindDomain/Ideal/Basic.lean,Mathlib/RingTheory/FractionalIdeal/Operations.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
4-43815 4 days ago |
11-6299 11 days ago |
11-5808 11 days |
| 40905 |
xroblot author:xroblot |
feat(FieldTheory): the compositum of two abelian extensions is abelian |
This adds:
* `AlgEquiv.ker_restrictNormalHom`: the kernel of the restriction homomorphism
`Gal(K₁/F) →* Gal(E/F)` is the fixing subgroup of the image of `E` in `K₁`.
* `IntermediateField.restrictNormalHomSupProd`: the embedding
`Gal(↑(K ⊔ L)/F) →* Gal(K/F) × Gal(L/F)`, `σ ↦ (σ|_K, σ|_L)`, for normal `K`, `L`.
* `IsAbelianGalois.sup`: the compositum of two abelian extensions is abelian.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
63/0 |
Mathlib/FieldTheory/Galois/Abelian.lean,Mathlib/FieldTheory/Galois/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
4-43736 4 days ago |
27-26223 27 days ago |
27-25714 27 days |
| 40864 |
xroblot author:xroblot |
feat(RingTheory/Localization/FractionRing): add IsFractionRing.fixingSubgroup_range_algebraMap |
Adds `IsFractionRing.fixingSubgroup_range_algebraMap`: if `K` and `L` are the fraction fields of `A` and `B` with `A ⊆ B`, then for `G` acting on `B` and on `L`, the fixing subgroup of (the image of) `A` in `B` equals the fixing subgroup of `K` in `L`.
This lemma was split out of #38864, and is used here to golf the proof of `IsGaloisGroup.fixingSubgroup_range_algebraMap`.
|
t-ring-theory |
24/14 |
Mathlib/FieldTheory/Galois/IsGaloisGroup.lean,Mathlib/RingTheory/Localization/FractionRing.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
4-43697 4 days ago |
31-1001 31 days ago |
31-1356 31 days |
| 40301 |
xroblot author:xroblot |
feat(RingTheory/UniqueFactorizationDomain): add emultiplicity characterizations |
Adds characterizations of primality, vanishing, associatedness and equality in `WfDvdMonoid`/`UniqueFactorizationMonoid` in terms of `emultiplicity`:
- `Prime.emultiplicity_self`, `Prime.emultiplicity_prime`
- `WfDvdMonoid.eq_zero_iff_forall_prime_pow_dvd`, `WfDvdMonoid.ne_zero_iff_finiteMultiplicity`
- `UniqueFactorizationMonoid.associated_iff_emultiplicity_eq(')`, `UniqueFactorizationMonoid.eq_iff_emultiplicity_eq`
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-ring-theory |
67/0 |
Mathlib/RingTheory/UniqueFactorizationDomain/Multiplicity.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
4-43297 4 days ago |
11-6398 11 days ago |
19-22845 19 days |
| 40302 |
xroblot author:xroblot |
feat(Data/Nat/Digits): add digitsAppend API lemmas and List.mapIdx_replicate |
Adds some lemmas about `Nat.digitsAppend` and `List.mapIdx_replicate`:
These complete the basic API around `Nat.digitsAppend` (already in Mathlib) that is needed downstream to relate it to `Nat.digits` and to sums indexed via `List.mapIdx`.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-data |
50/0 |
Mathlib/Data/List/Indexes.lean,Mathlib/Data/Nat/Digits/Lemmas.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
4-43272 4 days ago |
43-81779 43 days ago |
43-81414 43 days |
| 40604 |
xroblot author:xroblot |
feat(Algebra.GroupWithZero): generalize SMulZeroClass to MonoidWithZero and lift MulDistribMulAction to nonZeroDivisors |
Generalize the instance `SMulZeroClass α β` under `[Group α] [GroupWithZero β] [MulDistribMulAction α β]`to `[Group α] [MonoidWithZero β] [MulDistribMulAction α β]`.
From an action `[Group G] [MonoidWithZero M] [MulDistribMulAction G M]`, use this instance to construct an action on the nonzero divisors of 'M'.
**No diamond**: there is no general instance giving an action on a submonoid as a target (that would need the submonoid to be invariant, which isn't automatic), so defining the action on `nonZeroDivisors` should not clash with anything .
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
55/6 |
Mathlib/Algebra/GroupWithZero/Action/Defs.lean,Mathlib/Algebra/GroupWithZero/NonZeroDivisors.lean,Mathlib/Algebra/Ring/Action/ConjAct.lean |
3 |
2 |
['github-actions'] |
nobody |
none |
4-42893 4 days ago |
31-1063 31 days ago |
32-65006 32 days |
| 40557 |
xroblot author:xroblot |
feat(RingTheory/Ideal): generalize span_singleton_dvd_span_singleton_iff_dvd and emultiplicity_eq_emultiplicity_span |
Move `Ideal.span_singleton_dvd_span_singleton_iff_dvd` from
`Mathlib.RingTheory.DedekindDomain.Ideal.Lemmas` to
`Mathlib.RingTheory.Ideal.Operations`. The result holds for any `CommSemiring` — the `[IsPrincipalIdealRing R]` hypothesis was not needed.
Generalize `Ideal.emultiplicity_eq_emultiplicity_span` from
`[IsDomain R] [IsPrincipalIdealRing R]` to `[CommRing R]`. The proof simplifies considerably: it follows immediately from `emultiplicity_eq_emultiplicity_iff` and the generalized dvd lemma.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-ring-theory |
29/26 |
Mathlib/RingTheory/DedekindDomain/Ideal/Lemmas.lean,Mathlib/RingTheory/Ideal/Operations.lean |
2 |
3 |
['Multramate', 'github-actions', 'xroblot'] |
nobody |
1 |
4-42862 4 days ago |
39-75859 39 days ago |
39-75324 39 days |
| 41849 |
ZRTMRH author:ZRTMRH |
feat(Combinatorics/Quiver/Path): add `Quiver.Reachable` |
Add `Quiver.Reachable a b`, the existence of a directed path from `a` to `b`, together with its basic preorder API (`@[refl]`/`@[trans]`) and `Path.reachable`/`Hom.reachable`.
Unlike `SimpleGraph.Reachable`, this is only a preorder, not an equivalence, since quiver paths are directed; the symmetric notion is reachability in `Symmetrify V`.
---
This will be used by #38310 (where it was suggested in review).
This PR was written with AI assistance (Claude). The code has been reviewed by the author.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
maintainer-merge
|
40/1 |
Mathlib/Combinatorics/Quiver/Path.lean |
1 |
16 |
['SnirBroshi', 'YaelDillies', 'ZRTMRH', 'github-actions', 'robin-carlier'] |
nobody |
1 |
4-36992 4 days ago |
4-40473 4 days ago |
5-26238 5 days |
| 26214 |
Thmoas-Guan author:Thmoas-Guan |
feat(Algebra): definition of depth |
In this PR, we defined the depth of two modules as the minimal order of nonvanishing `Ext` and the `I-depth` for ideal `I` and some basic properties. Including the equivalence of the two in the condition of rees theorem.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #26212
- [x] depends on: #32966
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
410/0 |
Mathlib.lean,Mathlib/RingTheory/Depth/Basic.lean |
2 |
11 |
['Thmoas-Guan', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
nobody |
none |
4-19145 4 days ago |
4-20012 4 days ago |
17-15966 17 days |
| 41138 |
b-mehta author:b-mehta |
feat(RingTheory/PowerSeries/Derivative): add coeff_iterate_derivative |
A simple lemma about iterating the derivative
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
17/0 |
Mathlib/RingTheory/PowerSeries/Derivative.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
4-18736 4 days ago |
4-19821 4 days ago |
22-15404 22 days |
| 40182 |
Thmoas-Guan author:Thmoas-Guan |
feat(RingTheory): add lemma for span rank of maximal ideal under surjection |
In this PR, we added the following result : for noetherian local ring `(R, m, k)`, the span rank of maximal ideal of `R/I` adding `k` dimension of `I+m^2/m^2` is equal to span rank of maximal ideal of `R`.
This would be useful when dealing with regular local ring and quotient within `m^2`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
52/0 |
Mathlib/Algebra/Module/SpanRankOperations.lean,Mathlib/RingTheory/Ideal/Cotangent.lean,Mathlib/RingTheory/LocalRing/ResidueField/Basic.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
4-17403 4 days ago |
49-7140 49 days ago |
49-6605 49 days |
| 41434 |
b-mehta author:b-mehta |
feat(Logic/Function): add Set.separatesPoints_mono |
Also makes a small stylistic improvement to the previous definition
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
easy
t-logic
maintainer-merge
|
7/1 |
Mathlib/Logic/Function/Basic.lean |
1 |
4 |
['b-mehta', 'github-actions', 'themathqueen'] |
nobody |
none |
4-11723 4 days ago |
4-25144 4 days ago |
6-59014 6 days |
| 40400 |
seewoo5 author:seewoo5 |
feat(Algebra/Order/Floor): hermite identity for floor function |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[Hermite's identity](https://en.wikipedia.org/wiki/Hermite%27s_identity) for floor function. Usually stated over real numbers, but it also holds for "floor field". Initially done by Claude Opus 4.7, and later golfed by myself. Proved as a part of personal project.
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
75/0 |
Mathlib.lean,Mathlib/Algebra/Order/Floor/Hermite.lean |
2 |
7 |
['b-mehta', 'github-actions', 'seewoo5', 'themathqueen'] |
nobody |
none |
4-5418 4 days ago |
42-41446 42 days ago |
43-11146 43 days |
| 41889 |
Ljon4ik4 author:Ljon4ik4 |
chore: corrected namespace of ker_mapOfCompatibleSMul in the docstring of mapOfCompatibleSMul_surjective |
The Lemma `TensorProduct.mapOfCompatibleSMul_surjective` contained a wrong reference to `TensorProduct.AlgebraTensorModule.ker_mapOfCompatibleSMul` (it was missing the `AlgebraTensorModule`). That is corrected in this PR.
(Sorry if that is to minor for a PR !)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
1/1 |
Mathlib/LinearAlgebra/TensorProduct/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
4-2641 4 days ago |
4-4601 4 days ago |
4-4066 4 days |
| 41887 |
Ljon4ik4 author:Ljon4ik4 |
feat: lemmas showing properties of ofDerivation added |
Given an `R`-Lie algebra `L` and a commutative `R`-algebra `A`, there is a Lie algebra structure on `(A ⊗[R] L)`.
A derivation of `A` induces a Lie derivation of `(A ⊗[R] L)`, and one obtains a Lie algebra map
```
ofDerivation : Derivation R A A →ₗ⁅R⁆ LieDerivation R (A ⊗[R] L) (A ⊗[R] L)
```
In this PR we add a Lemma showing that `ofDerivation` is in fact `A`-linear, and that the resulting LieDerivation satisfies a Leibniz rule with respect to the `A`-multiplication on `A ⊗[R] L`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
13/0 |
Mathlib/Algebra/Lie/Derivation/BaseChange.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
4-914 4 days ago |
4-1459 4 days ago |
4-3900 4 days |
| 41757 |
wwylele author:wwylele |
doc: add theorem 8 (straightedge-and-compass construction) to 100.yaml |
Adding my repo as an external proof to the theorems.
---
A hard part of these theorems is verifying the definition and the statement. I have extracted the relevant definition in the [Challenge.lean file](https://github.com/wwylele/Compass/blob/master/Challenge.lean) for review. This is also verifiable using comparator. I followed [wikipedia](https://en.wikipedia.org/wiki/Straightedge_and_compass_construction#The_basic_constructions) for the definition of constructibility
Zulip thread: [#general > The impossibility of trisecting the angle](https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/The.20impossibility.20of.20trisecting.20the.20angle/with/610005158) (there is discussion about whether this definition allows "picking an arbitrary point")
I plan to upstream some or all of the project, but I anticipate it to be a long process, and it is not clear to me whether the entire project is within the scope of Mathlib, which is why I am only adding a link to the repo for now
AI usage disclosure: [this 63 lines](https://github.com/wwylele/Compass/blob/1352a83753052bc9a069b52aced81785dccb0aba/Compass/ConstructibleNumber.lean#L45-L111) were generated by Aristotle. The rest were written by me.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
documentation |
3/0 |
docs/100.yaml |
1 |
1 |
['github-actions'] |
nobody |
none |
4-635 4 days ago |
7-64112 7 days ago |
7-63577 7 days |
| 41457 |
NoahW314 author:NoahW314 |
feat(Algebra/Group/Units/Basic): deduplicate lemmas by generalizing to `IsDedekindFiniteMonoid` |
Generalize a group of lemmas to `IsDedekindFiniteMonoid` which previously had versions for `CommMonoid`, `LeftCancelMonoid`, `RightCancelMonoid`, `CancelMonoid`, and `Ordinal`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
30/86 |
Mathlib/Algebra/AffineMonoid/Irreducible.lean,Mathlib/Algebra/Group/Units/Basic.lean,Mathlib/AlgebraicTopology/SimplicialSet/Horn.lean,Mathlib/Combinatorics/Enumerative/DyckWord.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Exponential.lean,scripts/nolints_prime_decls.txt |
7 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
3-86383 3 days ago |
4-2790 4 days ago |
14-55350 14 days |
| 41886 |
gasparattila author:gasparattila |
chore(Tactic/Translate): remove the deprecated `@[to_additive "docstring"]` syntax |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
maintainer-merge
|
6/51 |
Mathlib/Tactic/Translate/Core.lean,MathlibTest/Attribute/ToAdditive/Basic.lean |
2 |
3 |
['JovanGerb', 'github-actions'] |
nobody |
none |
3-86297 3 days ago |
4-6708 4 days ago |
4-6173 4 days |
| 41436 |
b-mehta author:b-mehta |
feat(Topology/MetricSpace): add separatesPoints_lipschitzWith_one |
Together with #41434 this can be strengthened, but for now the strongest version of the claim is added, and further versions can be added later if they're deemed helpful.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
easy
t-topology
maintainer-merge
|
5/0 |
Mathlib/Topology/MetricSpace/Lipschitz.lean |
1 |
8 |
['b-mehta', 'github-actions', 'themathqueen'] |
nobody |
none |
3-84732 3 days ago |
3-86164 3 days ago |
6-42381 6 days |
| 39307 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/Copy): introduce `UnlabeledCopy` carrier subtype |
Adds `abbrev UnlabeledCopy A B := {B' : B.Subgraph // Nonempty (A ≃g B'.coe)}` and uses it to replace the previous inline filter-set body of `copyCount G H`. Drops the now unused legacy Finset-image bridge `copyCount_eq_card_image_copyToSubgraph`. Adds `uniqueUnlabeledCopyBot` instance so `copyCount_bot` is a one-liner via `Fintype.card_unique`.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
**Step 1/5 of the `Copy` / `InducedCopy` refactor-feat stack.**
This PR isolates the `UnlabeledCopy` type introduction and the count's type-form redefinition from the larger rename/convention work in the rest of the stack. Note that resolving the current clash in naming (`Copy` and `UnlabeledCopy` vs `labelledCopyCount` and `copyCount`) is part of #38745.
|
t-combinatorics |
28/24 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean |
1 |
26 |
['FordUniver', 'SnirBroshi', 'YaelDillies', 'b-mehta', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'mitchell-horner'] |
nobody |
2 |
3-84041 3 days ago |
4-82737 4 days ago |
59-16098 59 days |
| 41567 |
kim-em author:kim-em |
doc: fix TFAE list rendering in Rees theorem module docstring |
This PR fixes the module docstring of `Mathlib/RingTheory/Depth/Rees.lean`: the four TFAE items used `·`, which is not a markdown list marker, so they rendered as a single run-on paragraph on doc-gen. Replace them with proper `*` sub-list items, add the missing "and nontrivial" to the first item to match the Lean statement, and drop the unused binder name `Nfin` in `subsingleton_ext_of_exists_isRegular`.
Follow-up to [#26212 (feat(Algebra): the Rees theorem for depth)](https://github.com/leanprover-community/mathlib4/pull/26212), where the reviewer deferred checking the rendered docs to after the merge.
🤖 Prepared with Claude Code
|
t-ring-theory
LLM-generated
|
6/5 |
Mathlib/RingTheory/Depth/Rees.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
3-82483 3 days ago |
3-82539 3 days ago |
3-82004 3 days |
| 41570 |
kim-em author:kim-em |
doc: fix and add docstrings in RingTheory/Invariant/Galois |
This PR fixes the docstring of `Ideal.Quotient.normal`, which was copy-pasted from `Ideal.Quotient.exists_algHom_fixedPoint_quotient_under` and did not describe the statement `Normal (A ⧸ P) (B ⧸ Q)`, and add docstrings to `Ideal.IsFractionRing.normal` and `Ideal.IsFractionRing.finite_of_isInvariant`, matching the phrasing of the sibling results in `RingTheory/Invariant/Basic.lean`.
Follow-up to [#40247 (feat(RingTheory/Invariant/Basic): generalize `Ideal.Quotient.normal` to `IsFractionRing`)](https://github.com/leanprover-community/mathlib4/pull/40247).
🤖 Prepared with Claude Code
|
t-ring-theory
LLM-generated
|
5/3 |
Mathlib/RingTheory/Invariant/Galois.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
3-82482 3 days ago |
3-82509 3 days ago |
3-81974 3 days |
| 41566 |
kim-em author:kim-em |
chore: fix malformed deprecation date in Rep/Res |
This PR fixes the malformed deprecation date `since := "26/06/2026"` on the `res_map_hom_toLinearMap` alias in `Mathlib/RepresentationTheory/Rep/Res.lean`, changing it to the standard `YYYY-MM-DD` form `"2026-06-26"`. It was the only deprecation date in Mathlib not in this format, which breaks date-based deprecation tooling.
Follow-up to [#41054 (refactor(RepresentationTheory/Rep/Res): refactor resFunctor)](https://github.com/leanprover-community/mathlib4/pull/41054).
🤖 Prepared with Claude Code
|
t-algebra
LLM-generated
label:t-algebra$ |
1/1 |
Mathlib/RepresentationTheory/Rep/Res.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
3-82242 3 days ago |
3-82242 3 days ago |
3-81707 3 days |
| 41577 |
kim-em author:kim-em |
chore: add gcongr attribute to Nat.ascFactorial_le and Nat.descFactorial_le |
This PR adds the `@[gcongr]` attribute to `Nat.ascFactorial_le` and to the identically-shaped `Nat.descFactorial_le`, so that `gcongr` can rewrite under `ascFactorial`/`descFactorial`. `Nat.factorial_le` in the same file is already tagged `@[mono, gcongr]`.
Follow-up to [#40816 (feat(Data/Nat/Factorial/Basic): add `ascFactorial_le`)](https://github.com/leanprover-community/mathlib4/pull/40816).
🤖 Prepared with Claude Code
|
t-data
LLM-generated
|
2/0 |
Mathlib/Data/Nat/Factorial/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
3-82181 3 days ago |
3-82181 3 days ago |
3-81646 3 days |
| 41576 |
kim-em author:kim-em |
chore: use uniqueDiffOn_uIcc at existing call sites |
This PR replaces five inline proofs of `UniqueDiffOn ℝ [[a, b]]` (via `uniqueDiffOn_Icc (by grind)` or `uniqueDiffOn_Icc (inf_lt_sup.mpr h_ne)`) with the dedicated lemma `uniqueDiffOn_uIcc`, at four call sites in `Mathlib/Analysis/Calculus/Taylor.lean` and one in `Mathlib/MeasureTheory/Integral/IntervalIntegral/TrapezoidalRule.lean`.
Follow-up to [#40702 (feat(Analysis/Calculus): add uniqueDiffOn_uIcc)](https://github.com/leanprover-community/mathlib4/pull/40702).
🤖 Prepared with Claude Code
|
t-measure-probability
LLM-generated
|
5/5 |
Mathlib/Analysis/Calculus/Taylor.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/TrapezoidalRule.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
3-82109 3 days ago |
3-82109 3 days ago |
3-81574 3 days |
| 41583 |
kim-em author:kim-em |
chore: move simple_obj into Functor namespace, golf proofs, tidy docstring |
This PR moves `CategoryTheory.simple_obj` and `CategoryTheory.simple_obj_iff` into the `Functor` namespace (matching their sibling `Functor.simple_of_simple_obj` and enabling dot notation), golf `Functor.simple_obj` and the forward direction of `isSimpleModule_iff_eq_zero_or_injective` via the existing `LinearMap.injective_or_eq_zero`, remove unused `variable` binders in `RingTheory/SimpleRing/DivisionRing.lean`, and fix inverted heading levels and an "an unique" typo in that file's module docstring. The one call site of the renamed lemmas is updated; no deprecated aliases are added since the declarations merged a week ago.
Follow-up to [#41233 (feat(SimpleRing/DivisionRing): simple module is preserved by ModuleCat equivs)](https://github.com/leanprover-community/mathlib4/pull/41233).
🤖 Prepared with Claude Code
|
LLM-generated |
16/19 |
Mathlib/CategoryTheory/Simple.lean,Mathlib/RingTheory/SimpleRing/DivisionRing.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
3-81986 3 days ago |
3-81986 3 days ago |
3-81451 3 days |
| 41578 |
kim-em author:kim-em |
chore: weaken hypotheses of Algebra.IsUnramifiedIn.ramificationIdx_eq_one |
This PR drops the unused `[IsDomain R] [Module.Finite ℤ R] [CharZero R] [Algebra.IsIntegral R S]` hypotheses from `Algebra.IsUnramifiedIn.ramificationIdx_eq_one` by proving via `Ideal.ramificationIdx_eq_one` directly rather than through `Ideal.ramificationIdx_eq_one_iff`, and tidy the docstrings in `Mathlib/RingTheory/Unramified/Locus.lean` (fix a stray space before a period, mention `Algebra.IsUnramifiedIn` in the module docstring, add a missing blank line).
Follow-up to [#40886 (feat: add Algebra.IsUnramifiedIn)](https://github.com/leanprover-community/mathlib4/pull/40886).
🤖 Prepared with Claude Code
|
LLM-generated |
8/6 |
Mathlib/NumberTheory/RamificationInertia/Unramified.lean,Mathlib/RingTheory/Unramified/Locus.lean |
2 |
1 |
['github-actions'] |
nobody |
none |
3-81855 3 days ago |
3-81855 3 days ago |
3-81320 3 days |
| 41030 |
tb65536 author:tb65536 |
refactor(GroupTheory/Commensurable): add and generalize API |
This PR makes the following changes to `GroupTheory/Commensurable.lean`:
- Use `IsFiniteRelIndex` instead of `relIndex ≠ 0` to allow use of `IsFiniteRelIndex` API.
- Add API lemmas for `bot`, `top`, `inf`, `map`, `comap`, and `smul`.
- Deprecate the existing conjugation API lemmas as superseded by the new `smul` API lemmas.
- Define `commensurator` directly via `MulAut.conj` rather than going through `ConjAct`.
- Deprecate the auxiliary `commensurator'`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
130/55 |
Mathlib/GroupTheory/Commensurable.lean,Mathlib/GroupTheory/Index.lean,Mathlib/NumberTheory/ModularForms/ArithmeticSubgroups.lean,Mathlib/NumberTheory/ModularForms/CongruenceSubgroups.lean,Mathlib/NumberTheory/ModularForms/Cusps.lean,Mathlib/Topology/Algebra/Group/DiscontinuousSubgroup.lean,Mathlib/Topology/Algebra/IsUniformGroup/DiscreteSubgroup.lean |
7 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
3-80326 3 days ago |
3-82675 3 days ago |
26-65923 26 days |
| 41374 |
SnirBroshi author:SnirBroshi |
chore(SimpleGraph/Girth): namespace `egirth_le_length` under `IsCycle` |
For dot notation and because this is about cycles. This matches the circuit version.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
10/6 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
3-80290 3 days ago |
3-81480 3 days ago |
17-30549 17 days |
| 41432 |
SnirBroshi author:SnirBroshi |
chore(Combinatorics/SimpleGraph/Paths): spell `getVert` injectivity lemmas using `Set` intervals |
e.g. replace `{i | i ≤ p.length}` with `Iic p.length` in `IsPath.getVert_injOn`, which is the canonical spelling.
Proofs using `Set.mem_setOf`/`Set.mem_setOf_eq` had to be fixed, and got golfed along the way.
I also rewrote the proof of `IsPath.getVert_injOn` since it seemed too long.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
29/60 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
3-80214 3 days ago |
3-81543 3 days ago |
15-25070 15 days |
| 41380 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Girth): relate `girth` and `egirth` |
Also add `le_girth` to match `le_egirth`, which is the only `egirth` lemma that's missing a `girth` counterpart.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
38/4 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
none |
3-79870 3 days ago |
3-81109 3 days ago |
17-13713 17 days |
| 41622 |
benjub author:benjub |
feat(Order): add subset_Icc_iff and Set.OrdConnected.eq_Icc |
Add two lemmas relating to closed bounded intervals in a preorder:
- `subset_Icc_iff : s ⊆ Icc a b ↔ a ∈ lowerBounds s ∧ b ∈ upperBounds s` in `Mathlib/Order/Bounds/Basic.lean` characterizes containment in a closed bounded interval. This is the version "with witnesses" of `bddBelow_bddAbove_iff_subset_Icc`, and we prove the latter as a corollary.
- `OrdConnected.eq_Icc (s : Set α) (hs : OrdConnected s) (ha : IsLeast s a) (hb : IsGreatest s b) : s = Icc a b` in `Mathlib/Order/Interval/Set/OrdConnected.lean` gives a sufficient condition to be a closed bounded interval. It uses the previous lemma in its proof.
---
**Motivation:** I plan to use `OrdConnected.eq_Icc` to show that a set is closed when it is ordconnected and contains its infimum and supremum. This will allow to use the existing "continuous induction principle" `IsClosed.mem_of_ge_of_forall_exists_gt` to shorten the (compiling) proof in the draft PR #41552. |
t-order
new-contributor
|
9/3 |
Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/Interval/Set/OrdConnected.lean |
2 |
5 |
['benjub', 'github-actions', 'grunweg'] |
nobody |
none |
3-79690 3 days ago |
3-83925 3 days ago |
9-84187 9 days |
| 41829 |
felixpernegger author:felixpernegger |
perf: explicitly specify free universes in `ModuleCat` |
Like #40964, but for `ModuleCat`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
197/193 |
Mathlib/Algebra/Category/AlgCat/Symmetric.lean,Mathlib/Algebra/Category/CoalgCat/Basic.lean,Mathlib/Algebra/Category/CoalgCat/ComonEquivalence.lean,Mathlib/Algebra/Category/CoalgCat/Monoidal.lean,Mathlib/Algebra/Category/FGModuleCat/Basic.lean,Mathlib/Algebra/Category/Grp/ZModuleEquivalence.lean,Mathlib/Algebra/Category/ModuleCat/Adjunctions.lean,Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Differentials/Basic.lean,Mathlib/Algebra/Category/ModuleCat/FilteredColimits.lean,Mathlib/Algebra/Category/ModuleCat/Images.lean,Mathlib/Algebra/Category/ModuleCat/Kernels.lean,Mathlib/Algebra/Category/ModuleCat/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Localization.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Adjunction.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Closed.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Symmetric.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/ColimitFunctor.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Monoidal.lean,Mathlib/Algebra/Category/ModuleCat/Subobject.lean,Mathlib/Algebra/Homology/ShortComplex/ModuleCat.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/AlgebraicGeometry/StructureSheaf.lean,Mathlib/CategoryTheory/Abelian/Ext.lean,Mathlib/CategoryTheory/Abelian/GrothendieckCategory/ModuleEmbedding/GabrielPopescu.lean,Mathlib/CategoryTheory/Limits/ConcreteCategory/WithAlgebraicStructures.lean,Mathlib/CategoryTheory/Linear/Yoneda.lean,Mathlib/Condensed/Discrete/Module.lean,Mathlib/Condensed/Light/Explicit.lean,Mathlib/Condensed/Light/Small.lean,Mathlib/LinearAlgebra/QuadraticForm/QuadraticModuleCat.lean,Mathlib/LinearAlgebra/QuadraticForm/QuadraticModuleCat/Monoidal.lean,Mathlib/LinearAlgebra/QuadraticForm/QuadraticModuleCat/Symmetric.lean,Mathlib/RepresentationTheory/Coinvariants.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/Basic.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/Functoriality.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/LongExactSequence.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/Basic.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/Functoriality.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/LongExactSequence.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/LowDegree.lean,Mathlib/RepresentationTheory/Homological/Resolution.lean,Mathlib/RepresentationTheory/Homological/TateCohomology/Basic.lean,Mathlib/RepresentationTheory/Invariants.lean,Mathlib/RepresentationTheory/Rep/Basic.lean,Mathlib/RepresentationTheory/Rep/Iso.lean,Mathlib/RingTheory/Depth/Rees.lean,Mathlib/RingTheory/Flat/CategoryTheory.lean,Mathlib/RingTheory/Regular/Category.lean |
51 |
10 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors'] |
nobody |
none |
3-71101 3 days ago |
5-64817 5 days ago |
5-65251 5 days |
| 41731 |
mpacholski author:mpacholski |
feat(Topology/Algebra/Module/Spaces/ContinuousLinearMap): convert `toLinearMap₁₂` to a linear map |
Convert the projection `toLinearMap₁₂` (which strips the topology from a continuous semibilinear map) to a linear map, by showing that it preserves addition and scalar multiplication, and mark it with `@[simp apply]` absorb the `toLinearMap₁₂_apply` lemma.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
tech debt
|
11/9 |
Mathlib/Analysis/Fourier/FourierTransformDeriv.lean,Mathlib/MeasureTheory/Measure/CharacteristicFunction/TaylorExpansion.lean,Mathlib/Topology/Algebra/Module/Spaces/ContinuousLinearMap.lean |
3 |
23 |
['github-actions', 'mpacholski', 'pechersky', 'themathqueen'] |
nobody |
none |
3-67937 3 days ago |
3-69297 3 days ago |
5-26276 5 days |
| 41827 |
mpacholski author:mpacholski |
feat(LinearAlgebra/TensorProduct): port lifts API from PiTensorProduct |
Port the `lifts` API from `PiTensorProduct` to the binary `TensorProduct` in `Mathlib/LinearAlgebra/TensorProduct/Basic.lean`.
This API provides the necessary machinery to represent any tensor element as a formal sum of pure generators in the free monoid, which is a key prerequisite for defining and proving properties of the binary projective seminorm.
It is a direct reflection of lifts API in `Mathlib/LinearAlgebra/PiTensorProduct/Basic.lean`.
Specifically, add:
- `FreeAddMonoid.toTensorProduct`: proves that the image of a free monoid element is the sum of its pure tensor components.
- `lifts`: defines the set of all valid monoid representations of a given tensor.
- `nonempty_lifts`: proves that every tensor has at least one representation.
- `lifts_zero`, `lifts_add`, `lifts_smul_left` and `lifts_smul_right`: establish the algebraic behavior of lifts under addition, zero, and scalar multiplication.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
56/0 |
Mathlib/LinearAlgebra/TensorProduct/Basic.lean |
1 |
2 |
['github-actions'] |
nobody |
none |
3-65355 3 days ago |
3-67326 3 days ago |
3-66791 3 days |
| 41902 |
Ljon4ik4 author:Ljon4ik4 |
feat: sum of derivations lemmas |
This PR adds Lemmas showing that derivations are well-behaved with sums.
In order to prove one of them an additive map version of `coe : Derivation R A M → A →ₗ[R] M` is also added.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
17/0 |
Mathlib/RingTheory/Derivation/Basic.lean |
1 |
8 |
['Ljon4ik4', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
1 |
3-58569 3 days ago |
3-71131 3 days ago |
3-70602 3 days |
| 41905 |
wwylele author:wwylele |
feat(FieldTheory): relrank lemma about sup |
The main lemma I want is `(A ⊔ C).relrank (B ⊔ C) ≤ A.relrank B`. Added some trivial lemma along the way.
---
AI usage disclosure: this was originally drafted by Aristotle, then cleaned up by me.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
95/0 |
Mathlib/FieldTheory/Relrank.lean |
1 |
2 |
['copilot-pull-request-reviewer', 'github-actions'] |
nobody |
none |
3-58158 3 days ago |
3-61990 3 days ago |
3-61455 3 days |
| 37562 |
IvanRenison author:IvanRenison |
feat(Combinatorics/SimpleGraph): add several lemmas about when `Walk.bypass` and `Walk.cycleBypass` do nothing |
Co-authored-by: Vlad Tsyrklevich <vlad@tsyrklevi.ch>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37577
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
42/4 |
Mathlib/Combinatorics/SimpleGraph/Metric.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean |
2 |
24 |
['IvanRenison', 'SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'ocfnash', 'vlad902'] |
nobody |
2 |
3-54446 3 days ago |
3-67644 3 days ago |
23-62756 23 days |
| 40498 |
wangying11123 author:wangying11123 |
feat(Geometry/Euclidean): unoriented angle eq of oriented angle eq |
This PR adds two theorems to Mathlib/Geometry/Euclidean/Angle/Oriented/Affine.lean
`angle_eq_of_oangle_eq`: If two oriented angles are equal, and the four endpoint pairs are nondegenerate, then the
corresponding unoriented angles are equal.
`angle_eq_of_oangle_eq_not_collinear`: If two oriented angles are equal, and the first triple is not collinear, then the
corresponding unoriented angles are equal. |
new-contributor |
22/0 |
Mathlib/Geometry/Euclidean/Angle/Oriented/Affine.lean |
1 |
5 |
['github-actions', 'plp127'] |
nobody |
none |
3-43828 3 days ago |
41-11604 41 days ago |
41-11120 41 days |
| 35402 |
samueloettl author:samueloettl |
feat(Dynamics/BirkhoffSum): birkhoffAverage const |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
I think this is useful and one of these should be a simp lemma.
I'm not really sure if I got the naming of the theorems correct.
When generalizing to the assumption (n : R) ≠ 0 instead of the special case CharZero R with n ≠ 0 I had to use "open Classical in". I'm a bit unfamiliar with that part so please check if this makes sense. See also https://github.com/leanprover-community/mathlib4/pull/35307#discussion_r2823586252
[](https://gitpod.io/from-referrer/)
|
t-dynamics
new-contributor
|
14/0 |
Mathlib/Dynamics/BirkhoffSum/Average.lean |
1 |
39 |
['Maldooor', 'github-actions', 'lua-vr', 'mcdoll', 'plp127', 'samueloettl'] |
nobody |
none |
3-43246 3 days ago |
84-2660 84 days ago |
150-938 150 days |
| 41914 |
Qinghev author:Qinghev |
feat(Analysis/Normed): bound finite convex combinations |
---
codex辅助我完成了编写和校验。 |
t-analysis
LLM-generated
new-contributor
|
8/0 |
Mathlib/Analysis/Normed/Module/Convex.lean |
1 |
3 |
['Qinghev', 'github-actions'] |
nobody |
none |
3-41188 3 days ago |
3-42447 3 days ago |
3-41912 3 days |
| 41882 |
theebayuser author:theebayuser |
feat(Data/List): decidability of HasPeriod and periods of repeated lists |
Hello, this PR extends `Mathlib/Data/List/PeriodicityLemma.lean` with:
* a `Decidable (List.HasPeriod w p)` instance (it is a prefix test), and
* two directions that relate periods to repetition:
* `hasPeriod_flatten_replicate` — `(replicate n l).flatten` has period `l.length`
* `eq_flatten_replicate_of_hasPeriod` — a word with period `p` and length `r * p` is the `r`-fold repetition of its length-`p` prefix.
This characterizes `r`-th powers of words by a period plus a length constraint, which a future follow-up PR that I plan to work on will use.
AI disclosure: This code was mostly generated by Claude Fable 5 and Opus 4.8 as part of my larger project on combinatorics on words, which I then reviewed and revised to contribute to mathlib.
|
t-data
LLM-generated
new-contributor
|
70/1 |
Mathlib/Data/List/PeriodicityLemma.lean |
1 |
8 |
['SnirBroshi', 'github-actions', 'theebayuser'] |
nobody |
none |
3-40712 3 days ago |
4-27873 4 days ago |
4-27338 4 days |
| 41909 |
wwylele author:wwylele |
feat(FieldTheory): field equivalences for bot subfield |
Make it easier to use than the existing Subfield equality lemma.
---
~~The ZMod version `Subfield.botEquivZMod_symm_apply` is missing because the statement
`(Subfield.botEquivZMod K p).symm x = algebraMap (ZMod p) (⊥ : Subfield K) x` doesn't type-check, which is missing the instance `Algebra (ZMod p) (⊥ : Subfield K)`, which is because [ZMod.algebra](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Algebra/ZMod.html#ZMod.algebra) is a `def`~~
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
44/3 |
Mathlib/FieldTheory/PrimeField.lean |
1 |
4 |
['copilot-pull-request-reviewer', 'github-actions', 'plp127', 'wwylele'] |
nobody |
none |
3-40130 3 days ago |
3-49606 3 days ago |
3-49592 3 days |
| 39420 |
mbkybky author:mbkybky |
feat(RingTheory/LocalProperties): `Module.Invertible` is a local property |
Let `M` be a finite `R`-module. We show that `M` is invertible if `Mₘ` is invertible for any maximal ideal `m` of `R`.
- [x] depends on: #39109
- [x] depends on: #39412
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
101/0 |
Mathlib.lean,Mathlib/RingTheory/LocalProperties/Invertible.lean |
2 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
none |
3-38624 3 days ago |
3-39181 3 days ago |
12-11853 12 days |
| 41915 |
theebayuser author:theebayuser |
feat(Data/List): infixes, the enumerator of contiguous factors |
Hello, this PR extends `Mathlib/Data/List/Infix.lean` with the missing third enumerator alongside `inits` and `tails`:
* `infixes l` — all contiguous factors (infixes) of `l`, with multiplicity, as every prefix of every suffix, and
* its membership characterization and basic API:
* `mem_infixes` (`@[simp]`) — `s ∈ t.infixes ↔ s <:+: t`, the infix analogue of `mem_inits`/`mem_tails`
* `infixes_nil`, `infixes_cons`, `length_infixes_cons`, `nil_mem_infixes`, `self_mem_infixes`, `infixes_ne_nil`.
This gives `∃ s, s <:+: t ∧ P s` and `∀ s, s <:+: t → P s` executable bounded-search forms (e.g. deciding repetition-freeness of a fixed word by `decide`), which a future follow-up PR that I plan to work on will use.
AI disclosure: This code was mostly generated by Claude Fable 5 and Opus 4.8 as part of my larger project on combinatorics on words, which I then reviewed and revised to contribute to mathlib.
|
t-data
LLM-generated
new-contributor
|
47/1 |
Mathlib/Data/List/Infix.lean |
1 |
3 |
['github-actions', 'theebayuser'] |
nobody |
none |
3-38277 3 days ago |
3-41088 3 days ago |
3-40553 3 days |
| 41916 |
peabrainiac author:peabrainiac |
feat(Topology): add `Homeomorph.Set.iUnion` |
Disjoint unions of families of sets are canonically isomorphic to disjoint unions of the corresponding subtypes, provided each set in the family can be separated from the others with an open neighbourhood.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
The equivalence underlying this homeomorphism is already in mathlib as `Set.unionEqSigmaOfDisjoint`. I think that should be renamed to `Equiv.Set.iUnion` for several reasons, but doing so would touch 5 different files, so it's probably cleaner to do that in a separate PR.
[](https://gitpod.io/from-referrer/)
|
t-topology |
35/0 |
Mathlib/Topology/Homeomorph/Lemmas.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
3-38172 3 days ago |
3-39809 3 days ago |
3-39274 3 days |
| 40941 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add stabilizers of vectors in representations |
Add Representation.stabilizer: the subgroup fixing a vector in a representation.
Provide basic lemmas for zero vectors, scalar multiples, sums, intertwining maps, and conjugations, as a first step toward smooth representations. Make representation-theoretic arguments use this specialized API instead of repeatedly unfolding the fixed-vector condition or routing through the more general MulAction stabilizer API. |
t-algebra
new-contributor
label:t-algebra$ |
68/0 |
Mathlib.lean,Mathlib/RepresentationTheory/Stabilizer.lean |
2 |
70 |
['JX-Mo', 'Whysoserioushah', 'github-actions', 'tb65536'] |
nobody |
1 |
3-37160 3 days ago |
4-83078 4 days ago |
26-9188 26 days |
| 41911 |
kedlaya author:kedlaya |
feat(FieldTheory): implement Artin-Schreier extensions, Artin-Schreier theorem |
Implement the Artin-Schreier description of cyclic degree-p extensions of fields of characteristic p, and the related theorem of Artin-Schreier that a field with a finite algebraically closed extension is either algebraically closed or real closed.
|
t-algebra
new-contributor
label:t-algebra$ |
486/0 |
Mathlib.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/FieldTheory/ArtinSchreierExtension.lean,Mathlib/FieldTheory/IsRealClosed/ArtinSchreier.lean |
4 |
11 |
['SnirBroshi', 'github-actions', 'jcommelin', 'kedlaya'] |
nobody |
none |
3-35064 3 days ago |
3-43914 3 days ago |
3-44720 3 days |
| 41525 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add Smooth.Basic for smooth representations |
This PR introduces basic set up for smooth representations of a topological group. Hopefully it will serve as preliminary content for those who are interested in formalizing representation theory for p-adic reductive groups in the future. We introduce the following in the file:
1. Define smoothness for representations of a topological group. It is a property for a representation to be smooth: the stabilizer of any vector is open.
2. Prove basic closure properties: subrepresentations, quotient representations, tensor products, direct sums of smooth representations are smooth.
3. Construct smoothHom and contragredient: they are obtained by cutting out smooth vectors from the naive hom and dual.
- [ ] depends on #40941
- [ ] depends on #41081 |
new-contributor
t-algebra
label:t-algebra$ |
345/0 |
Mathlib.lean,Mathlib/RepresentationTheory/Smooth/Basic.lean,Mathlib/RepresentationTheory/Stabilizer.lean,Mathlib/RepresentationTheory/Subrepresentation.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean |
5 |
4 |
['JX-Mo', 'felixpernegger', 'github-actions'] |
nobody |
none |
3-21718 3 days ago |
4-82880 4 days ago |
13-18071 13 days |
| 41890 |
Ljon4ik4 author:Ljon4ik4 |
feat: semidirect product of Lie algebras - adding simp lemmas for toProd.symm and toProdl.symm |
As an `R`-module the semidirect product of two Lie algebras ` K ⋊⁅ψ⁆ L` is isomorphic to ` K × L`.
The simp lemmas for the reverse direction of this isomorphisms were missing and are added in this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
5/1 |
Mathlib/Algebra/Lie/SemiDirect.lean |
1 |
2 |
['github-actions'] |
nobody |
none |
3-21372 3 days ago |
4-3961 4 days ago |
4-3426 4 days |
| 41839 |
CoolRmal author:CoolRmal |
feat(Topology/Connected): connected subsets of finite one-dimensional Hausdorff measure |
This PR proves some properties of preconnected subsets of an extended metric space in terms of their Hausdorff measure.
- The extended diameter of a preconnected set is at most its one-dimensional Hausdorff measure
- A preconnected set with finite `d`-dimensional Hausdorff measure for some `d < 1` is a subsingleton, so any set with finite such measure is totally disconnected
- A preconnected set with finite one-dimensional Hausdorff measure is totally bounded.
The main tool is that the distance from a fixed base point is `1`-Lipschitz (we define it by `x => (edist a x).toReal` and `ENNReal.toReal` is necessary because `ℝ≥0∞` is not an EMetric space and blocks me from using `LipschitzOnWith`, this is also the reason why I proved some weird lemmas like `isClopen_setOf_edist_ne_top` and `IsPreconnected.edist_ne_top`), so it does not increase Hausdorff measures, and the image of a preconnected set under it is an interval whose one-dimensional Hausdorff measure is its length. Comparing the two turns distances inside the set into lower bounds for its measure.
Some of these lemmas probably should belong to a different space. Feel free to give me some suggestions on this.
In the future, I would also like to use results in this PR to prove that a preconnected, compact subset with finite one-dimensional Hausdorff measure is path-connected, and this is included in TODO.
Created with the help of Claude Code, carefully reviewed and golfed by myself.
|
t-topology
LLM-generated
|
179/0 |
Mathlib.lean,Mathlib/Topology/Connected/HausdorffMeasure.lean,Mathlib/Topology/EMetricSpace/Defs.lean |
3 |
3 |
['CoolRmal', 'github-actions', 'plp127'] |
nobody |
none |
3-18471 3 days ago |
3-19970 3 days ago |
5-53889 5 days |
| 41918 |
CoolRmal author:CoolRmal |
feat(Topology/Order): separability is hereditary for linearly ordered topological spaces |
In this PR we prove that
1. `isTopologicalBasis_isOpen_ordConnected`: in a linearly ordered topological space, every point of an open set `U` has an open `Set.OrdConnected` neighbourhood contained in `U`.
2. `countable_setOf_isolated_subtype`: in a separable linearly ordered topological space, the points of a subset `s` that are isolated in the subspace `s` form a countable set.
3. A subset of a separable linearly ordered topological space is separable in the subspace topology. This is proved as an instance.
The material was developed for showing the measurability of the pathwise variation of a continuous stochastic process in https://github.com/RemyDegenne/brownian-motion/pull/494. Created with the help of Claude Code, carefully reviewed and golfed by myself.
|
t-topology |
168/0 |
Mathlib.lean,Mathlib/Topology/Closure.lean,Mathlib/Topology/Order/Separable.lean |
3 |
1 |
['github-actions'] |
nobody |
none |
3-17147 3 days ago |
3-18926 3 days ago |
3-37052 3 days |
| 41919 |
junjihashimoto author:junjihashimoto |
feat(Algebra): the Cayley-Dickson construction, octonions and sedenions |
We define the Cayley–Dickson double of a (possibly non-associative) star ring, and show that it preserves `NonAssocRing` and `StarRing`, so the construction can be iterated indefinitely: quaternions → octonions → sedenions → trigintaduonions → …. The octonions and sedenions are defined as the corresponding levels of the tower over `Quaternion R`.
The key lemma is `CayleyDickson.unit_mul_unit_mul`: the doubling unit `ℓ = ⟨0, 1⟩` satisfies `ℓ * (ℓ * x) = -x` at *every* level of the tower, by a computation that only uses that `star` is an involution — no alternativity is developed (and indeed the sedenions are not alternative and have zero divisors). Left multiplication by `ℓ` is therefore a complex structure on every Cayley–Dickson algebra; in a follow-up PR this yields Plancherel's theorem and the Fourier inversion formula for the hypercomplex (octonion, sedenion, …) Fourier transforms, by reduction to the vector-valued `L²` Fourier theory.
TODO (deliberately left for future work, noted in the module docstring): alternativity of the double of an associative star ring (Moufang identities), the multiplicative norm for composition algebras.
- [ ] depends on: (nothing)
|
t-algebra
new-contributor
label:t-algebra$ |
315/0 |
Mathlib.lean,Mathlib/Algebra/CayleyDickson.lean,Mathlib/Algebra/Octonion.lean |
3 |
2 |
['github-actions'] |
nobody |
none |
3-11134 3 days ago |
3-11682 3 days ago |
3-11637 3 days |
| 41920 |
junjihashimoto author:junjihashimoto |
feat(Analysis/CliffordAlgebra): the pseudoscalar of Cl(n,0) and its complex structure |
We study the Clifford algebra of Euclidean `n`-space (the quadratic form `x ↦ ⟪x, x⟫_ℝ` on `EuclideanSpace ℝ (Fin n)`). The pseudoscalar `ω = e₀ ⋯ eₙ₋₁` satisfies
* `ω * ω = (-1) ^ (n.choose 2)` (`pseudoscalar_mul_pseudoscalar'`),
* `γᵢ * ω = (-1) ^ (n - 1) • (ω * γᵢ)` (`γ_mul_pseudoscalar`),
so it is central for odd `n`, and a square root of `-1` iff `n ≡ 2, 3 [MOD 4]`. In that case left multiplication by `ω` is a complex structure: we provide a scoped `Module ℂ` instance (via `Complex.liftAux` and `Module.compHom`; no commutation is needed for a module structure, which covers the non-central case `n ≡ 2 [MOD 4]`), and for `n ≡ 3 [MOD 4]` an `Algebra ℂ` structure as a non-instance def.
The sign computations are done by moving a generator through a product of distinct generators (`γ_mul_prod`, `γ_mul_prod_mem`, `prod_sq`), with no case analysis on `n`.
In a follow-up PR this makes the Clifford–Fourier transform (Ebling–Scheuermann) an instance of the ordinary vector-valued Fourier transform, giving Plancherel's theorem and the inversion formula.
- [ ] depends on: (nothing)
|
t-analysis
new-contributor
|
303/0 |
Mathlib.lean,Mathlib/Analysis/CliffordAlgebra/Euclidean.lean |
2 |
2 |
['github-actions'] |
nobody |
none |
3-11114 3 days ago |
3-11665 3 days ago |
3-11630 3 days |
| 41898 |
marcinbugaj author:marcinbugaj |
feat(Analysis/Convex): majorization preorder and T-transform decomposition |
Define `Majorizes` (notation `≺`) on `Fin n → ℝ`, show it is a preorder, define single T-transforms (`TTransform`/`RelatedByTTransform`) and `discrepancy`, and prove `majorizes_iff_reflTransGen_relatedByTTransform`: `a ≺ b` iff the sorted `a` is reachable from the sorted `b` by a finite chain of T-transforms (both directions).
|
t-analysis
new-contributor
|
637/0 |
Mathlib.lean,Mathlib/Analysis/Convex/Majorization.lean,docs/references.bib |
3 |
5 |
['YaelDillies', 'github-actions', 'marcinbugaj'] |
nobody |
none |
3-6507 3 days ago |
3-7104 3 days ago |
3-8796 3 days |
| 41892 |
Ljon4ik4 author:Ljon4ik4 |
feat: mapOfCompatibleSMul is the same map independently of S |
The `mapOfCompatibleSMul : M ⊗[A] N →ₗ[S] M ⊗[R] N` is the same map independently of `S`. This PR adds two lemmas asserting that (one for the underlying AddHom, one for the kernels).
I am not quite sure whether the second one is in the optimal shape: It was the shape useful to me, but maybe there is some better way to phrase it or it should be omitted completely (since it follows from the first one...).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
10/1 |
Mathlib/LinearAlgebra/TensorProduct/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
none |
3-4036 3 days ago |
4-2236 4 days ago |
4-1701 4 days |
| 38213 |
WenrongZou author:WenrongZou |
feat(FormalGroup): APIs for formal group homomorphism |
This PR introduces some APIs for homomorphism between formal group laws.
---
- [x] depends on: #38052
- [x] depends on: #37618
- [ ] depends on : #41710
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
large-import
|
27/0 |
Mathlib/RingTheory/FormalGroup/Basic.lean,Mathlib/RingTheory/MvPowerSeries/Equiv.lean,Mathlib/RingTheory/MvPowerSeries/Substitution.lean,Mathlib/RingTheory/PowerSeries/Substitution.lean |
4 |
6 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
none |
3-2552 3 days ago |
21-5829 21 days ago |
21-69043 21 days |
| 41896 |
felixpernegger author:felixpernegger |
chore: replace `simp_all` with `simp` whenever possible |
Replaces `simp_all (only)` with `simp (only)` whenever possible. About 5% of total `simp_all` occurences. Excludes MathlibTest.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
102/106 |
Archive/Arithcc.lean,Archive/Examples/Eisenstein.lean,Archive/Imo/Imo2024Q3.lean,Mathlib/Algebra/BigOperators/Intervals.lean,Mathlib/Algebra/Category/Grp/ForgetCorepresentable.lean,Mathlib/Algebra/GroupWithZero/ProdHom.lean,Mathlib/Algebra/Homology/SpectralObject/HasSpectralSequence.lean,Mathlib/Algebra/Module/Torsion/PrimaryComponent.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/Algebra/Polynomial/Expand.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Reduction.lean,Mathlib/Analysis/Analytic/Binomial.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Analysis/Meromorphic/Basic.lean,Mathlib/Analysis/Meromorphic/Divisor.lean,Mathlib/Analysis/Meromorphic/FactorizedRational.lean,Mathlib/Analysis/Polynomial/Fourier.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean,Mathlib/Analysis/SpecialFunctions/Integrals/PosLogEqCircleAverage.lean,Mathlib/Analysis/SpecialFunctions/Log/PosLog.lean,Mathlib/CategoryTheory/Action/Basic.lean,Mathlib/CategoryTheory/Functor/TypeValuedFlat.lean,Mathlib/CategoryTheory/Topos/Sheaf.lean,Mathlib/Combinatorics/Quiver/Path/Vertices.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Data/List/Nodup.lean,Mathlib/Data/List/PeriodicityLemma.lean,Mathlib/Data/List/ProdSigma.lean,Mathlib/Data/List/Sigma.lean,Mathlib/Data/Nat/Digits/Lemmas.lean,Mathlib/Data/PEquiv.lean,Mathlib/Data/PNat/Xgcd.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/Sym/Sym2.lean,Mathlib/Data/TypeVec.lean,Mathlib/Data/Vector/Basic.lean,Mathlib/Data/ZMod/Basic.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/GroupTheory/PushoutI.lean,Mathlib/LinearAlgebra/Basis/Exact.lean,Mathlib/LinearAlgebra/Finsupp/Pi.lean,Mathlib/MeasureTheory/Constructions/Polish/StronglyMeasurable.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Measure/CharacteristicFunction/TaylorExpansion.lean,Mathlib/MeasureTheory/Measure/PreVariation.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/Defs.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/NumberTheory/RatFunc/Ostrowski.lean,Mathlib/Order/ScottContinuity/Prod.lean,Mathlib/Order/SetDissipate.lean,Mathlib/Order/SuccPred/Basic.lean,Mathlib/Order/WithBot.lean,Mathlib/Probability/Kernel/Deterministic.lean,Mathlib/Probability/Kernel/Representation.lean,Mathlib/RepresentationTheory/Homological/TateCohomology/Basic.lean,Mathlib/RepresentationTheory/Tannaka.lean,Mathlib/RingTheory/Adjoin/Polynomial/Bivariate.lean,Mathlib/RingTheory/Binomial.lean,Mathlib/RingTheory/DiscreteValuationRing/Basic.lean,Mathlib/RingTheory/HahnSeries/Basic.lean,Mathlib/RingTheory/HahnSeries/Multiplication.lean,Mathlib/RingTheory/HahnSeries/Summable.lean,Mathlib/RingTheory/Multiplicity.lean,Mathlib/RingTheory/Nilpotent/Exp.lean,Mathlib/RingTheory/OrderOfVanishing/Basic.lean,Mathlib/RingTheory/OrderOfVanishing/Noetherian.lean,Mathlib/RingTheory/PowerSeries/Schroder.lean,Mathlib/RingTheory/Valuation/Basic.lean,Mathlib/RingTheory/Valuation/Discrete/Basic.lean,Mathlib/RingTheory/Valuation/IsTrivialOn.lean,Mathlib/RingTheory/Valuation/ValuativeRel/Basic.lean,Mathlib/SetTheory/Lists.lean,Mathlib/Topology/LocallyFinsupp.lean,Mathlib/Topology/MetricSpace/Bounded.lean |
80 |
23 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'themathqueen', 'vlad902'] |
nobody |
none |
3-696 3 days ago |
3-64832 3 days ago |
3-72190 3 days |
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Updated |
Last status change |
total time in review |
| 13791 |
digama0 author:digama0 |
refactor: Primrec and Partrec |
General cleanup of the `Primrec` and `Partrec` files, to better adjust to lean 4 things. The main user-visible change is that `Primrec₂` is no longer a `def` but an `abbrev`, because it was causing inference issues in lean 4. I also removed all the nonterminal `simp`s in `PartrecCode.lean`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
tech debt
|
585/778 |
Mathlib/Computability/Ackermann.lean,Mathlib/Computability/Halting.lean,Mathlib/Computability/Partrec.lean,Mathlib/Computability/PartrecCode.lean,Mathlib/Computability/Primrec.lean |
5 |
2 |
['github-actions', 'grunweg'] |
nobody |
702-66462 1 year ago |
766-56048 766 days ago |
1-84718 1 day |
| 15448 |
urkud author:urkud |
chore(*): deprecate `Option.elim'` |
Use `Option.elim` instead.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
merge-conflict
awaiting-author
tech debt
|
54/50 |
Mathlib/Algebra/BigOperators/Option.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Analysis/BoxIntegral/Partition/Additive.lean,Mathlib/Analysis/BoxIntegral/Partition/Basic.lean,Mathlib/Analysis/BoxIntegral/Partition/Split.lean,Mathlib/Analysis/Calculus/LagrangeMultipliers.lean,Mathlib/CategoryTheory/Category/PartialFun.lean,Mathlib/Computability/TMToPartrec.lean,Mathlib/Data/Option/Defs.lean,Mathlib/LinearAlgebra/Basis.lean,Mathlib/Logic/Embedding/Set.lean,Mathlib/Logic/Equiv/Basic.lean,Mathlib/MeasureTheory/OuterMeasure/Induced.lean,Mathlib/NumberTheory/Dioph.lean,Mathlib/Topology/Compactness/Paracompact.lean,Mathlib/Topology/LocallyFinite.lean |
17 |
12 |
['Ruben-VandeVelde', 'YaelDillies', 'github-actions', 'grunweg', 'urkud'] |
nobody |
701-76427 1 year ago |
711-36189 711 days ago |
7-18420 7 days |
| 12879 |
grunweg author:grunweg |
feat: port ge_or_gt linter from mathlib3 |
Code works and is essentially green: next step is to split up into separate PRs.
Feedback welcome on whether:
- all the test changes are good, or I should simply allow it in more cases
- if calc blocks need to be explicitly exempt
---
- [ ] depends on: #12933
- [ ] depends on: #12934
- [ ] depends on: #12931
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-linter
tech debt
blocked-by-other-PR
|
736/319 |
Archive/Imo/Imo1960Q1.lean,Archive/Imo/Imo1962Q1.lean,Archive/Imo/Imo1988Q6.lean,Archive/Imo/Imo1994Q1.lean,Archive/Imo/Imo2001Q2.lean,Archive/Imo/Imo2005Q3.lean,Archive/Imo/Imo2006Q3.lean,Archive/Imo/Imo2008Q2.lean,Archive/Imo/Imo2008Q3.lean,Archive/Imo/Imo2008Q4.lean,Archive/Imo/Imo2011Q5.lean,Archive/Imo/Imo2019Q4.lean,Archive/Sensitivity.lean,Archive/Wiedijk100Theorems/AreaOfACircle.lean,Archive/Wiedijk100Theorems/BallotProblem.lean,Archive/Wiedijk100Theorems/BirthdayProblem.lean,Archive/Wiedijk100Theorems/CubingACube.lean,Mathlib.lean,Mathlib/Algebra/DualNumber.lean,Mathlib/Algebra/Order/CauSeq/BigOperators.lean,Mathlib/Algebra/Order/Field/Basic.lean,Mathlib/Algebra/Order/Ring/Defs.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/Algebra/Polynomial/Degree/Definitions.lean,Mathlib/Algebra/Star/CHSH.lean,Mathlib/Analysis/Analytic/Basic.lean,Mathlib/Analysis/Calculus/UniformLimitsDeriv.lean,Mathlib/Analysis/Complex/Hadamard.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Basic.lean,Mathlib/Analysis/InnerProductSpace/Projection.lean,Mathlib/Analysis/Normed/Group/ControlledClosure.lean,Mathlib/Analysis/NormedSpace/MStructure.lean,Mathlib/Analysis/SpecialFunctions/Log/Base.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Basic.lean,Mathlib/Combinatorics/SimpleGraph/DegreeSum.lean,Mathlib/Combinatorics/SimpleGraph/LapMatrix.lean,Mathlib/Computability/AkraBazzi/AkraBazzi.lean,Mathlib/Computability/AkraBazzi/GrowsPolynomially.lean,Mathlib/Data/Complex/Basic.lean,Mathlib/Data/FP/Basic.lean,Mathlib/Data/Finset/Basic.lean,Mathlib/Data/Finset/Fold.lean,Mathlib/Data/Finsupp/Notation.lean,Mathlib/Data/Int/Lemmas.lean,Mathlib/Data/Nat/Dist.lean,Mathlib/Data/Nat/Lattice.lean,Mathlib/Data/Nat/Parity.lean,Mathlib/Data/Nat/Upto.lean,Mathlib/Data/Ordmap/Ordset.lean,Mathlib/Data/PNat/Basic.lean,Mathlib/Data/UInt.lean,Mathlib/GroupTheory/Coxeter/Length.lean,Mathlib/MeasureTheory/Constructions/Polish.lean,Mathlib/MeasureTheory/Covering/Besicovitch.lean,Mathlib/MeasureTheory/Covering/Vitali.lean,Mathlib/MeasureTheory/Covering/VitaliFamily.lean,Mathlib/MeasureTheory/Integral/Layercake.lean,Mathlib/NumberTheory/LegendreSymbol/JacobiSymbol.lean,Mathlib/NumberTheory/Padics/Hensel.lean,Mathlib/NumberTheory/Padics/PadicNorm.lean,Mathlib/NumberTheory/PellMatiyasevic.lean,Mathlib/NumberTheory/Rayleigh.lean,Mathlib/Order/Filter/AtTopBot.lean,Mathlib/Probability/Process/Stopping.lean,Mathlib/RingTheory/Adjoin/Basic.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/SetTheory/Ordinal/Notation.lean,Mathlib/Tactic.lean,Mathlib/Tactic/CancelDenoms/Core.lean,Mathlib/Tactic/Common.lean,Mathlib/Tactic/IntervalCases.lean,Mathlib/Tactic/Linarith/Datatypes.lean,Mathlib/Tactic/Linarith/Lemmas.lean,Mathlib/Tactic/Linarith/Oracle/FourierMotzkin.lean,Mathlib/Tactic/Linter/GeOrGt.lean,Mathlib/Tactic/Linter/Style.lean,Mathlib/Tactic/NormNum/GCD.lean,Mathlib/Tactic/NormNum/Inv.lean,Mathlib/Tactic/Ring/Basic.lean,Mathlib/Topology/Category/Profinite/Nobeling.lean,Mathlib/Topology/ContinuousFunction/Bounded.lean,Mathlib/Topology/MetricSpace/CauSeqFilter.lean,Mathlib/Topology/MetricSpace/Cauchy.lean,Mathlib/Topology/MetricSpace/Closeds.lean,Mathlib/Topology/Sequences.lean,scripts/lint-style.py,test/Explode.lean,test/GCongr/inequalities.lean,test/GeOrGt.lean,test/LibrarySearch/IsCompact.lean,test/LibrarySearch/basic.lean,test/Recall.lean,test/Rify.lean,test/Use.lean,test/cancel_denoms.lean,test/congr.lean,test/delabLinearIndependent.lean,test/delaborators.lean,test/interval_cases.lean,test/linarith.lean |
109 |
4 |
['github-actions', 'grunweg', 'urkud'] |
nobody |
176-64635 5 months ago |
797-65629 797 days ago |
0-15256 4 hours |
| 24100 |
eric-wieser author:eric-wieser |
feat: restore some explicit binders from Lean 3 |
Part of #24099
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
tech debt
t-topology
t-algebra
label:t-algebra$ |
39/42 |
Mathlib/Data/FinEnum.lean,Mathlib/FieldTheory/Galois/Profinite.lean,Mathlib/Topology/Bases.lean,Mathlib/Topology/Compactness/CompactlyGeneratedSpace.lean,Mathlib/Topology/MetricSpace/IsometricSMul.lean,Mathlib/Topology/Metrizable/CompletelyMetrizable.lean,Mathlib/Topology/Metrizable/Uniformity.lean,Mathlib/Topology/Order.lean,Mathlib/Topology/Order/LowerUpperTopology.lean,Mathlib/Topology/UniformSpace/UniformEmbedding.lean |
10 |
3 |
['github-actions', 'grunweg', 'leanprover-community-bot-assistant'] |
nobody |
171-60700 5 months ago |
462-52303 462 days ago |
0-954 15 minutes |
| 39386 |
MichaelStollBayreuth author:MichaelStollBayreuth |
chore: shake --keep-implied --keep-prefix --fix |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
tech debt
large-import
merge-conflict
|
113346/9457 |
Mathlib/Algebra/AddConstMap/Basic.lean,Mathlib/Algebra/AddConstMap/Equiv.lean,Mathlib/Algebra/AddTorsor/Basic.lean,Mathlib/Algebra/AddTorsor/Defs.lean,Mathlib/Algebra/AffineMonoid/Basic.lean,Mathlib/Algebra/AffineMonoid/Embedding.lean,Mathlib/Algebra/AffineMonoid/Irreducible.lean,Mathlib/Algebra/AffineMonoid/UniqueSums.lean,Mathlib/Algebra/Algebra/Basic.lean,Mathlib/Algebra/Algebra/Bilinear.lean,Mathlib/Algebra/Algebra/Defs.lean,Mathlib/Algebra/Algebra/Epi.lean,Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/Algebra/Algebra/Field.lean,Mathlib/Algebra/Algebra/Hom.lean,Mathlib/Algebra/Algebra/Hom/Rat.lean,Mathlib/Algebra/Algebra/IsSimpleRing.lean,Mathlib/Algebra/Algebra/NonUnitalHom.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Operations.lean,Mathlib/Algebra/Algebra/Opposite.lean,Mathlib/Algebra/Algebra/Pi.lean,Mathlib/Algebra/Algebra/Prod.lean,Mathlib/Algebra/Algebra/Rat.lean,Mathlib/Algebra/Algebra/RestrictScalars.lean,Mathlib/Algebra/Algebra/Shrink.lean,Mathlib/Algebra/Algebra/Spectrum/Basic.lean,Mathlib/Algebra/Algebra/Spectrum/Pi.lean,Mathlib/Algebra/Algebra/Spectrum/Quasispectrum.lean,Mathlib/Algebra/Algebra/StrictPositivity.lean,Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Algebra/Subalgebra/Centralizer.lean,Mathlib/Algebra/Algebra/Subalgebra/Directed.lean,Mathlib/Algebra/Algebra/Subalgebra/IsSimpleOrder.lean,Mathlib/Algebra/Algebra/Subalgebra/Lattice.lean,Mathlib/Algebra/Algebra/Subalgebra/Matrix.lean,Mathlib/Algebra/Algebra/Subalgebra/MulOpposite.lean,Mathlib/Algebra/Algebra/Subalgebra/Operations.lean,Mathlib/Algebra/Algebra/Subalgebra/Order.lean,Mathlib/Algebra/Algebra/Subalgebra/Pi.lean,Mathlib/Algebra/Algebra/Subalgebra/Pointwise.lean,Mathlib/Algebra/Algebra/Subalgebra/Prod.lean,Mathlib/Algebra/Algebra/Subalgebra/Rank.lean,Mathlib/Algebra/Algebra/Subalgebra/Tower.lean,Mathlib/Algebra/Algebra/Subalgebra/Unitization.lean,Mathlib/Algebra/Algebra/Tower.lean,Mathlib/Algebra/Algebra/TransferInstance.lean,Mathlib/Algebra/Algebra/Unitization.lean,Mathlib/Algebra/Algebra/ZMod.lean,Mathlib/Algebra/AlgebraicCard.lean,Mathlib/Algebra/Azumaya/Basic.lean,Mathlib/Algebra/Azumaya/Defs.lean,Mathlib/Algebra/Azumaya/Matrix.lean,Mathlib/Algebra/BigOperators/Associated.lean,Mathlib/Algebra/BigOperators/Balance.lean,Mathlib/Algebra/BigOperators/Expect.lean,Mathlib/Algebra/BigOperators/Field.lean,Mathlib/Algebra/BigOperators/Fin.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/BigOperators/Finsupp/Basic.lean,Mathlib/Algebra/BigOperators/Finsupp/Fin.lean,Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/BigOperators/Group/Finset/Defs.lean,Mathlib/Algebra/BigOperators/Group/Finset/Gaps.lean,Mathlib/Algebra/BigOperators/Group/Finset/Indicator.lean,Mathlib/Algebra/BigOperators/Group/Finset/Interval.lean,Mathlib/Algebra/BigOperators/Group/Finset/Lemmas.lean,Mathlib/Algebra/BigOperators/Group/Finset/Pi.lean,Mathlib/Algebra/BigOperators/Group/Finset/Piecewise.lean,Mathlib/Algebra/BigOperators/Group/Finset/Powerset.lean,Mathlib/Algebra/BigOperators/Group/Finset/Preimage.lean,Mathlib/Algebra/BigOperators/Group/Finset/Sigma.lean,Mathlib/Algebra/BigOperators/Group/List/Basic.lean,Mathlib/Algebra/BigOperators/Group/List/Lemmas.lean,Mathlib/Algebra/BigOperators/Group/Multiset/Basic.lean,Mathlib/Algebra/BigOperators/Group/Multiset/Defs.lean,Mathlib/Algebra/BigOperators/GroupWithZero/Action.lean,Mathlib/Algebra/BigOperators/GroupWithZero/Finset.lean,Mathlib/Algebra/BigOperators/Intervals.lean,Mathlib/Algebra/BigOperators/ModEq.lean,Mathlib/Algebra/BigOperators/Module.lean,Mathlib/Algebra/BigOperators/NatAntidiagonal.lean,Mathlib/Algebra/BigOperators/Option.lean,Mathlib/Algebra/BigOperators/Pi.lean,Mathlib/Algebra/BigOperators/Ring/Finset.lean,Mathlib/Algebra/BigOperators/Ring/List.lean,Mathlib/Algebra/BigOperators/Ring/Multiset.lean,Mathlib/Algebra/BigOperators/Ring/Nat.lean,Mathlib/Algebra/BigOperators/RingEquiv.lean,Mathlib/Algebra/BigOperators/Sym.lean,Mathlib/Algebra/BigOperators/WithTop.lean,Mathlib/Algebra/BrauerGroup/Defs.lean,Mathlib/Algebra/Category/AlgCat/Basic.lean,Mathlib/Algebra/Category/AlgCat/Limits.lean,Mathlib/Algebra/Category/AlgCat/Monoidal.lean,Mathlib/Algebra/Category/AlgCat/Symmetric.lean,Mathlib/Algebra/Category/BialgCat/Basic.lean,Mathlib/Algebra/Category/BialgCat/Monoidal.lean,Mathlib/Algebra/Category/BoolRing.lean,Mathlib/Algebra/Category/CoalgCat/Basic.lean |
7976 |
3 |
['MichaelStollBayreuth', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
67-80607 2 months ago |
68-74439 68 days ago |
0-2 2 seconds |
| 39499 |
MichaelStollBayreuth author:MichaelStollBayreuth |
chore: run `lake shake` successively from the leaves |
We do the experiment from #39481 in reverse order: starting from the leaves, run `lake shake --force --only <module> --fix` and then `lake build` until something breaks. Then fix the problems manually and continue.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
tech debt
|
8057/0 |
MS_test/topsort.txt |
1 |
2 |
['MichaelStollBayreuth', 'github-actions'] |
nobody |
66-15821 2 months ago |
66-28580 66 days ago |
0-1 1 second |
| 39481 |
MichaelStollBayreuth author:MichaelStollBayreuth |
chore: run `lake shake` iteratively and fix problems |
This adds `-- shake: keep-all` to all modules under `Mathlib.Lean`, `Mathlib.Tactic` and `Mathlib.Util`.
Then it goes through the remaining modules in topological order (according to the list in `MS_test/topsort3.txt`) and for each of them, runs `lake shake --force <name> --only <name> --fix`, followed by `lake build <name>`. If there is no error, the changes are commited. Otherwise, the problems are fixed manually; then the changes are committed.
This has been done for the first ~400 modules in the list. 38 of them required manual fixes; they are listed in `MS_test/after_shake_fixes.txt`.
We note that the import stats bot claims that the number of imports actually *increases* in most files, which somehow runs counter expectations...
Discussion: [#mathlib4 > shake without --add-public @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/shake.20without.20--add-public/near/595349216)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
tech debt
large-import
merge-conflict
|
9178/858 |
MS_test/after_shake_fixes.txt,MS_test/topsort3.txt,Mathlib/Algebra/AddTorsor/Defs.lean,Mathlib/Algebra/BigOperators/Group/List/Basic.lean,Mathlib/Algebra/CharZero/Defs.lean,Mathlib/Algebra/ContinuedFractions/Basic.lean,Mathlib/Algebra/Divisibility/Basic.lean,Mathlib/Algebra/Divisibility/Hom.lean,Mathlib/Algebra/Divisibility/Prod.lean,Mathlib/Algebra/Divisibility/Units.lean,Mathlib/Algebra/EuclideanDomain/Field.lean,Mathlib/Algebra/Expr.lean,Mathlib/Algebra/Field/Defs.lean,Mathlib/Algebra/Field/IsField.lean,Mathlib/Algebra/Free.lean,Mathlib/Algebra/FreeMonoid/Basic.lean,Mathlib/Algebra/FreeMonoid/Count.lean,Mathlib/Algebra/Group/Action/Defs.lean,Mathlib/Algebra/Group/Action/Faithful.lean,Mathlib/Algebra/Group/Action/Option.lean,Mathlib/Algebra/Group/Action/Pretransitive.lean,Mathlib/Algebra/Group/Action/Sum.lean,Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Commute/Basic.lean,Mathlib/Algebra/Group/Commute/Units.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Group/Equiv/Basic.lean,Mathlib/Algebra/Group/Equiv/Defs.lean,Mathlib/Algebra/Group/Equiv/TypeTags.lean,Mathlib/Algebra/Group/Ext.lean,Mathlib/Algebra/Group/Hom/Basic.lean,Mathlib/Algebra/Group/Hom/Defs.lean,Mathlib/Algebra/Group/Hom/End.lean,Mathlib/Algebra/Group/Hom/Instances.lean,Mathlib/Algebra/Group/Idempotent.lean,Mathlib/Algebra/Group/InjSurj.lean,Mathlib/Algebra/Group/Int/Units.lean,Mathlib/Algebra/Group/Invertible/Basic.lean,Mathlib/Algebra/Group/Invertible/Defs.lean,Mathlib/Algebra/Group/Irreducible/Defs.lean,Mathlib/Algebra/Group/ModEq.lean,Mathlib/Algebra/Group/Nat/Hom.lean,Mathlib/Algebra/Group/Opposite.lean,Mathlib/Algebra/Group/Pi/Basic.lean,Mathlib/Algebra/Group/Pi/Units.lean,Mathlib/Algebra/Group/Prod.lean,Mathlib/Algebra/Group/Semiconj/Basic.lean,Mathlib/Algebra/Group/Semiconj/Defs.lean,Mathlib/Algebra/Group/Semiconj/Units.lean,Mathlib/Algebra/Group/Torsion.lean,Mathlib/Algebra/Group/TypeTags/Basic.lean,Mathlib/Algebra/Group/Units/Basic.lean,Mathlib/Algebra/Group/Units/Defs.lean,Mathlib/Algebra/Group/Units/Hom.lean,Mathlib/Algebra/Group/WithOne/Basic.lean,Mathlib/Algebra/Group/WithOne/Defs.lean,Mathlib/Algebra/GroupWithZero/Action/Defs.lean,Mathlib/Algebra/GroupWithZero/Basic.lean,Mathlib/Algebra/GroupWithZero/Commute.lean,Mathlib/Algebra/GroupWithZero/Defs.lean,Mathlib/Algebra/GroupWithZero/Divisibility.lean,Mathlib/Algebra/GroupWithZero/Hom.lean,Mathlib/Algebra/GroupWithZero/Idempotent.lean,Mathlib/Algebra/GroupWithZero/InjSurj.lean,Mathlib/Algebra/GroupWithZero/Invertible.lean,Mathlib/Algebra/GroupWithZero/NeZero.lean,Mathlib/Algebra/GroupWithZero/Opposite.lean,Mathlib/Algebra/GroupWithZero/Prod.lean,Mathlib/Algebra/GroupWithZero/Regular.lean,Mathlib/Algebra/GroupWithZero/Semiconj.lean,Mathlib/Algebra/GroupWithZero/Units/Basic.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/Algebra/HierarchyDesign.lean,Mathlib/Algebra/Homology/ComplexShape.lean,Mathlib/Algebra/Homology/Embedding/Basic.lean,Mathlib/Algebra/NeZero.lean,Mathlib/Algebra/Notation.lean,Mathlib/Algebra/Notation/Defs.lean,Mathlib/Algebra/Notation/Lemmas.lean,Mathlib/Algebra/Notation/Pi/Basic.lean,Mathlib/Algebra/Notation/Pi/Defs.lean,Mathlib/Algebra/Notation/Prod.lean,Mathlib/Algebra/Opposites.lean,Mathlib/Algebra/Order/GroupWithZero/Unbundled/Defs.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Defs.lean,Mathlib/Algebra/Prime/Defs.lean,Mathlib/Algebra/Quotient.lean,Mathlib/Algebra/Regular/Basic.lean,Mathlib/Algebra/Regular/Defs.lean,Mathlib/Algebra/Ring/Basic.lean,Mathlib/Algebra/Ring/Defs.lean,Mathlib/Algebra/Ring/Ext.lean,Mathlib/Algebra/Ring/GrindInstances.lean,Mathlib/Algebra/Ring/Hom/Defs.lean,Mathlib/Algebra/Ring/Hom/InjSurj.lean,Mathlib/Algebra/Ring/Idempotent.lean,Mathlib/Algebra/Ring/InjSurj.lean,Mathlib/Algebra/Ring/Int/Defs.lean,Mathlib/Algebra/Ring/Invertible.lean,Mathlib/Algebra/Ring/MinimalAxioms.lean |
690 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
65-54350 2 months ago |
unknown |
0-0 0 seconds |
| 38990 |
Vierkantor author:Vierkantor |
chore(Algebra/DirectSum): workaround for `backward.inferInstanceAs` |
This PR works around a `backward.inferInstanceAs` compatibility flag introduced by identifying `DirectSum` with `DFinsupp` in our definitions. We introduce a new dsimp lemma `funLike_eq` that transfers the `FunLike` instances, and now we can use `DirectSum`'s `FunLike` instance, instead of the custom `CoeFun` instance. I unsqueezed a few `simp`s, which all ran pretty much instant on my machine so it shouldn't cause much slowdown. Also we fix two porting notes.
This is not a great approach, but it seems the least painful for the short term. The alternative would be to strictly enforce the defeq barrier between `DirectSum` and `DFinsupp`, which would mean a substantial rewrite of this corner of Mathlib. We can't make `DirectSum` an `@[implicit_reducible]`, because we need different multiplication on it than `DFinsupp` has.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
t-ring-theory
awaiting-author
merge-conflict
label:t-algebra$ |
36/38 |
Mathlib/Algebra/DirectSum/Basic.lean,Mathlib/Algebra/DirectSum/Internal.lean,Mathlib/Algebra/DirectSum/Ring.lean,Mathlib/Algebra/Lie/DirectSum.lean,Mathlib/Algebra/Order/Module/HahnEmbedding.lean,Mathlib/Analysis/InnerProductSpace/Projection/FiniteDimensional.lean,Mathlib/Analysis/InnerProductSpace/Subspace.lean,Mathlib/RingTheory/MvPolynomial/WeightedHomogeneous.lean,Mathlib/RingTheory/Spectrum/Prime/RingHom.lean |
9 |
4 |
['JovanGerb', 'Vierkantor', 'github-actions', 'mathlib-merge-conflicts'] |
JovanGerb assignee:JovanGerb |
59-75830 1 month ago |
69-670 69 days ago |
8-19465 8 days |
| 40404 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Constructions/BorelSpace): remove some `erw`'s |
Extracted from #40348
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-order
t-measure-probability
|
27/6 |
Mathlib/MeasureTheory/Constructions/BorelSpace/Order.lean,Mathlib/Order/Interval/Set/Basic.lean,Mathlib/Order/OrderDual.lean |
3 |
1 |
['github-actions'] |
nobody |
43-11264 1 month ago |
43-14562 43 days ago |
43-14027 43 days |
| 39769 |
chenson2018 author:chenson2018 |
chore(Topology): refactor proofs where `grind?` fails |
These are sources of technical debt as now reported in the [weekly linting report](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log/with/544658968). The idea is that a successful `grind` proof can fail to report the theorems it used via `grind?`, which means that if these proofs break across toolchains that it becomes significantly harder to repair.
Most of these are fixed by squeezing the call to `grind` and unsetting `linter.tacticAnalysis.verifyGrindOnly` so they no longer appear in the weekly report. Unfortunately, this can't be on by default for performance reasons, but I highly encourage using this linter when adding any `grind` proofs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
merge-conflict
|
35/17 |
Mathlib/Topology/Compactness/CountablyCompact.lean,Mathlib/Topology/EMetricSpace/BoundedVariation.lean,Mathlib/Topology/MetricSpace/Pseudo/Defs.lean,Mathlib/Topology/Order/Basic.lean,Mathlib/Topology/Order/IsLUB.lean,Mathlib/Topology/Order/WithTop.lean,Mathlib/Topology/Path.lean,Mathlib/Topology/Sets/VietorisTopology.lean,Mathlib/Topology/Sheaves/Flasque.lean |
9 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
40-60327 1 month ago |
40-60327 40 days ago |
18-36384 18 days |
| 39983 |
grunweg author:grunweg |
chore: remove `Dynamics` dependency from `Data` |
A handful of files remain, which might need more thought. (For instance, some remaining `Data/Matrix` files would need to be *merged* with their `LinearAlgebra/Matrix` file, which is more effort than a mere rename.)
---
- [ ] depends on: #39984
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
tech debt
|
1/1 |
Mathlib/Tactic/Linter/DirectoryDependency.lean |
1 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
35-17357 1 month ago |
54-76558 54 days ago |
0-1 1 second |
| 40915 |
felixpernegger author:felixpernegger |
chore: remove (all) instances of `simp; infer_instance` |
Removes some exceptions for `linter.flexible`; these are all occurences of this pattern (including multi-line).
See also the reviews at #40883
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
tech debt
|
9/11 |
Mathlib/Analysis/Calculus/ContDiff/FaaDiBruno.lean,Mathlib/CategoryTheory/Comma/Over/Pullback.lean |
2 |
4 |
['eric-wieser', 'github-actions', 'themathqueen'] |
nobody |
23-75723 23 days ago |
26-80056 26 days ago |
2-59119 2 days |
| 40874 |
felixpernegger author:felixpernegger |
chore(AlgebraicGeometry/FunctionField): golf / defEq abuse |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
awaiting-author
tech debt
|
12/23 |
Mathlib/AlgebraicGeometry/FunctionField.lean |
1 |
6 |
['chrisflav', 'felixpernegger', 'github-actions'] |
dagurtomas assignee:dagurtomas |
23-75612 23 days ago |
27-75440 27 days ago |
2-71737 2 days |
| 40394 |
mathlib-splicebot author:mathlib-splicebot |
chore(MeasureTheory/Measure/Haar/InnerProductSpace: remove an `erw` |
Extracted from #40348. |
t-measure-probability
tech debt
|
7/6 |
Mathlib/MeasureTheory/Measure/Haar/InnerProductSpace.lean |
1 |
4 |
['felixpernegger', 'github-actions'] |
EtienneC30 assignee:EtienneC30 |
19-50605 19 days ago |
43-20020 43 days ago |
43-19485 43 days |
| 40925 |
JovanGerb author:JovanGerb |
chore(CategoryTheory/Functor/Category): don't expose `NatTrans.hcomp` |
This PR hides the definition of `NatTrans.hcomp`, because it has two equally sensible possible definitions. As a result, we can get rid of the `to_dual_insert_cast`. `simps` doesn't work for non-exposed definition, so `hcomp_app` is proved separately, and its dual `hcomp_app'` is added.
Note: some proofs break, because the `dsimp` set changes, due to the definition not being exposed. This is a bit unfortunate. There was some discussion on Zulip about changing `dsimp` for category theory into a simp set, which would fix this problem, because we could then add `hcomp_app` to this set.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
maintainer-merge
tech debt
|
30/15 |
Mathlib/AlgebraicTopology/DoldKan/NCompGamma.lean,Mathlib/AlgebraicTopology/DoldKan/PInfty.lean,Mathlib/CategoryTheory/Functor/Category.lean,Mathlib/CategoryTheory/Monoidal/Action/End.lean,Mathlib/CategoryTheory/Monoidal/End.lean,Mathlib/CategoryTheory/Triangulated/TStructure/SpectralObject.lean,Mathlib/CategoryTheory/Types/Basic.lean |
7 |
11 |
['JovanGerb', 'github-actions', 'grunweg', 'leanprover-radar', 'riccardobrasca'] |
nobody |
18-7516 18 days ago |
29-5413 29 days ago |
29-5685 29 days |
| 38957 |
wwylele author:wwylele |
chore(GroupTheory/DivisibleHull): remove `backward.privateInPublic` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-group-theory
|
5/12 |
Mathlib/GroupTheory/DivisibleHull.lean |
1 |
13 |
['Komyyy', 'github-actions', 'grunweg', 'jcommelin', 'wwylele'] |
nobody |
16-2653 16 days ago |
57-48553 57 days ago |
71-39968 71 days |
| 40920 |
felixpernegger author:felixpernegger |
chore(Topology/Separation): remove defEq abuse |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
awaiting-author
|
6/4 |
Mathlib/Topology/Separation/Basic.lean,Mathlib/Topology/Separation/CompletelyRegular.lean |
2 |
9 |
['chenson2018', 'felixpernegger', 'github-actions', 'grunweg', 'j-loreaux'] |
nobody |
14-44187 14 days ago |
14-44187 14 days ago |
14-82413 14 days |
| 40402 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Integral): remove an `erw` |
Extracted from #40348. Note we cannot just do `simp_all [...]`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
tech debt
awaiting-author
|
3/2 |
Mathlib/MeasureTheory/Integral/RieszMarkovKakutani/NNReal.lean |
1 |
5 |
['Multramate', 'felixpernegger', 'github-actions', 'mcdoll'] |
EtienneC30 assignee:EtienneC30 |
13-4512 13 days ago |
13-8105 13 days ago |
30-7330 30 days |
| 41555 |
BryceT233 author:BryceT233 |
feat(Algebra/Order/Antidiagonal): connect `Finset.HasAntidiagonal` with `Filter.TendstoCofinite` |
This PR connects `Finset.HasAntidiagonal` with `Filter.TendstoCofinite` and cleans up `TendstoCofinite.lean`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #41521
[](https://gitpod.io/from-referrer/)
|
tech debt
large-import
blocked-by-other-PR
|
69/37 |
Mathlib/Algebra/Order/Antidiag/Prod.lean,Mathlib/Algebra/Order/Antidiag/Tendsto.lean,Mathlib/Order/Filter/TendstoCofinite.lean |
3 |
7 |
['BryceT233', 'github-actions', 'mathlib-dependent-issues', 'plp127'] |
nobody |
12-21292 12 days ago |
12-46017 12 days ago |
0-866 14 minutes |
| 41095 |
felixpernegger author:felixpernegger |
chore(Data/Vector/Basic): remove defeq abuse |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
tech debt
awaiting-author
|
12/15 |
Mathlib/Data/Vector/Basic.lean |
1 |
4 |
['github-actions', 'jkandel1', 'joneugster', 'leanprover-radar'] |
joneugster assignee:joneugster |
12-20385 12 days ago |
12-20388 12 days ago |
13-16159 13 days |
| 40981 |
LLaurance author:LLaurance |
chore(Algebra/Ring/BooleanRing): resolve TODO on non-terminal simp |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
1/3 |
Mathlib/Algebra/Ring/BooleanRing.lean |
1 |
2 |
['Multramate', 'github-actions'] |
nobody |
12-10746 12 days ago |
12-11294 12 days ago |
28-2495 28 days |
| 41460 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Walk/Operations): more operations API |
---
Moved `support_tail_of_not_nil` up because `reverse_dropLast` uses it as a `simp` lemma.
Tagged it with `simp` makes `cons_support_tail` work `by simp`, so I also untagged `cons_support_tail`.
You may wonder whether we need `mapLe` API if it's an `abbrev` for `map`; the answer is you can't `rw`/`simp` goals with `mapLe` using `map` API because these tactics do not unfold the `Hom.ofLE` (and then `id`) applications in the endpoints of the walk, since it isn't reducible (even though `mapLe` itself is). The definition of `mapLe` is actually an `abbrev` plus a non-reducibly defeq type change.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
tech debt
|
86/15 |
Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Operations.lean |
3 |
5 |
['SnirBroshi', 'github-actions', 'vlad902'] |
nobody |
8-32622 8 days ago |
14-47500 14 days ago |
14-48842 14 days |
| 38018 |
matthewjasper author:matthewjasper |
feat(Algebra): expand Subalgebra.restrictScalars API |
Add an instance for the original algebra structure, the implied scalar tower instances, and the algebra equivalence with the original subalgebra. Use this to remove some `set_option backward.isDefEq.respectTransparency`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
|
61/15 |
Mathlib/Algebra/Algebra/Subalgebra/Tower.lean,Mathlib/RingTheory/AlgebraicIndependent/TranscendenceBasis.lean,Mathlib/RingTheory/Finiteness/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean |
4 |
15 |
['eric-wieser', 'github-actions', 'kbuzzard', 'leanprover-radar', 'mariainesdff', 'mathlib-merge-conflicts', 'matthewjasper'] |
mariainesdff assignee:mariainesdff |
7-56115 7 days ago |
7-58038 7 days ago |
82-23381 82 days |
| 40310 |
felixpernegger author:felixpernegger |
chore(Algebra): remove an `erw` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
3/4 |
Mathlib/Algebra/Ring/Divisibility/Basic.lean |
1 |
10 |
['felixpernegger', 'github-actions', 'grunweg', 'j-loreaux', 'madvorak', 'mathlib-bors'] |
nobody |
7-20974 7 days ago |
33-5913 33 days ago |
34-31965 34 days |
| 41753 |
kbuzzard author:kbuzzard |
perf(Algebra/Category/ModuleCat/Presheaf): speed up the monoidal pushforward instance |
This was one of the slowest declarations to typecheck in mathlib. Replacing an `Iso.refl` with something more explicit yields something which the kernel finds far easier to swallow. As a bonus we can remove a `set_option backward.isDefEq.respectTransparency false`. |
t-algebra
tech debt
LLM-generated
awaiting-author
label:t-algebra$ |
22/4 |
Mathlib/Algebra/Category/ModuleCat/Presheaf/PushforwardZeroMonoidal.lean |
1 |
4 |
['github-actions', 'kbuzzard', 'leanprover-radar', 'robin-carlier'] |
nobody |
7-19852 7 days ago |
7-19852 7 days ago |
0-45512 12 hours |
| 41772 |
joelriou author:joelriou |
feat(CategoryTheory): gluing lemma for trivial bundles |
From https://github.com/joelriou/topcat-model-category
---
- [ ] depends on: #41750
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
t-category-theory
tech debt
blocked-by-other-PR
|
444/43 |
Mathlib.lean,Mathlib/CategoryTheory/Extensive.lean,Mathlib/CategoryTheory/Limits/Shapes/BinaryProducts.lean,Mathlib/CategoryTheory/Limits/Shapes/CombinedProducts.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/IsPullback/Defs.lean,Mathlib/CategoryTheory/Limits/Types/Coproducts.lean,Mathlib/CategoryTheory/Limits/VanKampen.lean,Mathlib/CategoryTheory/MorphismProperty/Limits.lean,Mathlib/CategoryTheory/MorphismProperty/TrivialBundles.lean,Mathlib/CategoryTheory/MorphismProperty/TrivialBundlesGluing.lean,Mathlib/Condensed/Light/Sequence.lean |
11 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
7-1625 7 days ago |
7-2577 7 days ago |
0-2 2 seconds |
| 37751 |
JovanGerb author:JovanGerb |
chore(Order/Filter/IsBounded): use `to_dual` |
use `to_dual` for `Filter.IsBounded`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37747
[](https://gitpod.io/from-referrer/)
|
tech debt
merge-conflict
|
81/227 |
Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Order/Filter/IsBounded.lean |
2 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
6-68551 6 days ago |
6-70007 6 days ago |
39-1887 39 days |
| 41750 |
joelriou author:joelriou |
feat(CategoryTheory/MorphismProperty): trivial bundles |
In a category `C`, we introduce a structure `TrivialBundleWithFiber p F` which records the fact that for `p : E ⟶ B`, there is a morphism `r : E ⟶ F` which allows to identify `E` to the binary product of `B` and `F`. The corresponding property of morphisms is `trivialBundlesWithFiber F`.
(In a certain distant future, in the case of a suitable convenient category of topological spaces, this will be used as part of the formalization of the model category structure on simplicial sets.)
From https://github.com/joelriou/topcat-model-category
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
awaiting-author
|
288/43 |
Mathlib.lean,Mathlib/CategoryTheory/Extensive.lean,Mathlib/CategoryTheory/Limits/Shapes/BinaryProducts.lean,Mathlib/CategoryTheory/Limits/Shapes/CombinedProducts.lean,Mathlib/CategoryTheory/Limits/Types/Coproducts.lean,Mathlib/CategoryTheory/Limits/VanKampen.lean,Mathlib/CategoryTheory/MorphismProperty/Limits.lean,Mathlib/CategoryTheory/MorphismProperty/TrivialBundles.lean,Mathlib/Condensed/Light/Sequence.lean |
9 |
2 |
['github-actions', 'robin-carlier'] |
nobody |
6-66608 6 days ago |
6-66608 6 days ago |
0-85885 23 hours |
| 41776 |
JovanGerb author:JovanGerb |
fix(Order/Heyting/Regular): fix `Lattice` instance diamond |
This PR fixes a diamond in the `Lattice` instance on `Regular`.
It's a bit awkward that `Lattice` does not extend `Min`, so `fast_instance%` doesn't save us here.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-order
|
1/2 |
Mathlib/Order/Heyting/Regular.lean |
1 |
5 |
['JovanGerb', 'YaelDillies', 'eric-wieser', 'github-actions'] |
YaelDillies assignee:YaelDillies |
6-61600 6 days ago |
6-84352 6 days ago |
6-83817 6 days |
| 41717 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Walk): more `transfer` API |
---
The Hamiltonian lemmas don't really need `Finite`; I'll fix this after #41435 (in whichever merges second).
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
tech debt
|
54/23 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean |
4 |
1 |
['github-actions'] |
nobody |
6-39284 6 days ago |
8-36668 8 days ago |
8-36236 8 days |
| 41706 |
vlad902 author:vlad902 |
chore(*): fix flexible linter exceptions |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
19/56 |
Mathlib/Algebra/Ring/BooleanRing.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Formula.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Jacobian/Formula.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Projective/Formula.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/PosPart/Basic.lean,Mathlib/Analysis/SpecialFunctions/Integrability/Basic.lean,Mathlib/Combinatorics/SetFamily/FourFunctions.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Chunk.lean,Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Control/EquivFunctor/Instances.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/InformationTheory/Coding/KraftMcMillan.lean,Mathlib/NumberTheory/LucasLehmer.lean,Mathlib/NumberTheory/PythagoreanTriples.lean,Mathlib/RingTheory/Nilpotent/Exp.lean |
15 |
2 |
['github-actions', 'vlad902'] |
nobody |
6-21539 6 days ago |
6-22407 6 days ago |
8-70983 8 days |
| 41200 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): pure morphisms |
In this PR, we define the notion of `κ`-pure morphisms (`IsCardinalPure`) in a category `C`. This class contains split monomorphisms and is stable under `κ`-filtered colimits. When `C` is a `κ`-accessible category, we show that `κ`-pure morphisms are monomorphisms.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
|
187/6 |
Mathlib.lean,Mathlib/CategoryTheory/Presentable/Basic.lean,Mathlib/CategoryTheory/Presentable/CardinalPure.lean |
3 |
16 |
['github-actions', 'joelriou', 'smorel394'] |
nobody |
5-86075 5 days ago |
18-9261 18 days ago |
21-62809 21 days |
| 41542 |
tb65536 author:tb65536 |
refactor(AlgebraicGeometry/Sites/Small): golf and remove some `backward.isDefEq.respectTransparency` |
This PR golfs and removes some `backward.isDefEq.respectTransparency`. Some proofs with the help of Claude, with further golfing by myself.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
LLM-generated
|
58/134 |
Mathlib/AlgebraicGeometry/Sites/Small.lean,Mathlib/CategoryTheory/Sites/Over.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
5-68351 5 days ago |
7-48903 7 days ago |
12-66352 12 days |
| 41843 |
grunweg author:grunweg |
chore(Geometry/Manifold/MFDeriv/Atlas): remove backcompat option |
The defeq abuse just needs a simple rewrite to fix.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
easy
t-differential-geometry
|
1/1 |
Mathlib/Geometry/Manifold/MFDeriv/Atlas.lean |
1 |
0 |
[] |
nobody |
5-56655 5 days ago |
5-53686 5 days ago |
0-3055 50 minutes |
| 41796 |
grunweg author:grunweg |
feat: if f is an immersion at x, then x is an immersed point |
This is the easy direction, and is true without any hypotheses on x being an interior point. The converse requires the inverse function theorem, and some condition on the boundary behaviour of f.
---
- [ ] depends on: #35078
- [ ] depends on: #41843
There will be another one or two pre-requisite PRs for generalising lemmas about `extChartAt` to extended charts, to be filed soon.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
blocked-by-other-PR
tech debt
|
408/102 |
Mathlib.lean,Mathlib/Analysis/Normed/Module/ContinuousInverse.lean,Mathlib/Geometry/Manifold/ImmersedPoint.lean,Mathlib/Geometry/Manifold/Immersion.lean,Mathlib/Geometry/Manifold/LocalDiffeomorph.lean,Mathlib/Geometry/Manifold/MFDeriv/Atlas.lean |
6 |
3 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
5-52960 5 days ago |
6-64260 6 days ago |
0-50 50 seconds |
| 39808 |
chenson2018 author:chenson2018 |
chore(Data): refactor proofs where `grind?` fails |
These are sources of technical debt as now reported in the [weekly linting report](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log/with/544658968). The idea is that a successful `grind` proof can fail to report the theorems it used via `grind?`, which means that if these proofs break across toolchains that it becomes significantly harder to repair.
Most of these are fixed by squeezing the call to `grind` and unsetting `linter.tacticAnalysis.verifyGrindOnly` so they no longer appear in the weekly report. Unfortunately, this can't be on by default for performance reasons, but I highly encourage using this linter when adding any `grind` proofs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
tech debt
|
69/41 |
Mathlib/Data/Bool/Basic.lean,Mathlib/Data/Bool/Set.lean,Mathlib/Data/EReal/Operations.lean,Mathlib/Data/Fin/Tuple/NatAntidiagonal.lean,Mathlib/Data/Finset/Image.lean,Mathlib/Data/Finset/Powerset.lean,Mathlib/Data/Finset/Range.lean,Mathlib/Data/Finset/SMulAntidiagonal.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Chain.lean,Mathlib/Data/List/Count.lean,Mathlib/Data/List/Cycle.lean,Mathlib/Data/List/Induction.lean,Mathlib/Data/List/ReduceOption.lean,Mathlib/Data/List/Sigma.lean,Mathlib/Data/List/Sort.lean,Mathlib/Data/List/TakeDrop.lean,Mathlib/Data/List/Triplewise.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Set/Card.lean,Mathlib/Data/Set/Disjoint.lean,Mathlib/Data/Set/Function.lean,Mathlib/Data/Set/Insert.lean,Mathlib/Data/Sum/Order.lean |
24 |
3 |
['Vierkantor', 'chenson2018', 'github-actions'] |
nobody |
5-49687 5 days ago |
58-35053 58 days ago |
58-34518 58 days |
| 39890 |
thorimur author:thorimur |
feat: overhaul `defsWithUnderscore` linter |
Modifies the behavior of the `defsWithUnderscore` linter to be more principled.
- Instead of exempting parsers by namespace, exempts by type.
- Exempt library notes by type (thus linting potential incorrect non-`LibraryNote` defs in the `LibraryNote` namespace).
- Exempt deprecated declarations; these are not technical debt (at least, not for this reason).
- Exempt `Prop`-typed defs; these may be made by `unif_hint`, for example, and are the resposibility of a different linter in any case.
- Exempts `Formatter` and `Parenthesizer` declarations.
- In the case that a definition is namespaceed under a theorem, exempts (only) the part of the declaration name that is a theorem.
- Do not exempt on the basis of guillemets; this is an elaborator feature.
- Do not exempt private declaration names. `isAutoDecl` (mistakenly?) considers all private names to be autogenerated, and we therefore need `isPrivateToUsername` beforehand. (Really, though, maybe this should be a batteries fix.) The reasoning here is that underscores are a *source readability* concern, not just a public interface concern, so private names are in scope for the linter as well.
- Exempts all `_<number>` names, not just `_1` and `_2`.
- Exempts decls ending in `_project` when they come from `Project`, using the same mechanism by which `_project` is appended.
- Modifications to the meta code to module-proof the linter, in the eventuality that env_linters have to be modulized or we want to use this function in a syntax linter.
---
- [x] depends on: #40125
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
tech debt
awaiting-author
merge-conflict
|
260/195 |
Mathlib/Tactic/Linter/Style.lean,MathlibTest/Linter/TextBased.lean,scripts/nolints.json |
3 |
6 |
['SnirBroshi', 'github-actions', 'joneugster', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
5-47199 5 days ago |
15-80589 15 days ago |
33-80855 33 days |
| 40940 |
JovanGerb author:JovanGerb |
feat(CategoryTheory/Comma/StructuredArrow): use `to_dual` |
This PR generates declarations about `CostructuredArrow` from those about `StructuredArrow` using `to_dual`.
This PR deprecates `hom_eq_iff`` in favour of `ext_iff`/`hom_ext_iff`.
This PR also removes the bad `Category` instance that `CostructuredArrow` had, which caused dot notation on arrows to not work correctly. This lets us clean up some later proofs.
Some missing prerequisites: tagging `eqToHom`, tagging more of `Mono`/`Epi`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #40503
[](https://gitpod.io/from-referrer/)
|
t-category-theory
WIP
tech debt
merge-conflict
|
71/169 |
Mathlib/CategoryTheory/Comma/Basic.lean,Mathlib/CategoryTheory/Comma/StructuredArrow/Basic.lean,Mathlib/CategoryTheory/Comma/StructuredArrow/CommaMap.lean,Mathlib/CategoryTheory/Limits/ConeCategory.lean,Mathlib/CategoryTheory/Limits/Final.lean,Mathlib/CategoryTheory/Limits/Indization/ParallelPair.lean,Mathlib/Tactic/Translate/ToDual.lean,Mathlib/Topology/Category/LightProfinite/Extend.lean,Mathlib/Topology/Category/Profinite/Extend.lean |
9 |
6 |
['JovanGerb', 'github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
5-46818 5 days ago |
29-15848 29 days ago |
0-465 7 minutes |
| 41442 |
tb65536 author:tb65536 |
chore(CategoryTheory/Comma/Over/OverClass): refactor `OverClass` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
t-category-theory
awaiting-CI
tech debt
merge-conflict
|
198/207 |
Mathlib/AlgebraicGeometry/Cover/Over.lean,Mathlib/AlgebraicGeometry/Limits.lean,Mathlib/AlgebraicGeometry/Morphisms/ClosedImmersion.lean,Mathlib/AlgebraicGeometry/Over.lean,Mathlib/AlgebraicGeometry/Pullbacks.lean,Mathlib/AlgebraicGeometry/ResidueField.lean,Mathlib/AlgebraicGeometry/Restrict.lean,Mathlib/AlgebraicGeometry/Sites/Affine.lean,Mathlib/AlgebraicGeometry/Sites/Etale.lean,Mathlib/AlgebraicGeometry/Sites/Small.lean,Mathlib/AlgebraicGeometry/Stalk.lean,Mathlib/CategoryTheory/Comma/Over/OverClass.lean |
12 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
5-43407 5 days ago |
15-11985 15 days ago |
0-1 1 second |
| 41564 |
felixpernegger author:felixpernegger |
chore: unexpose public sections with no defs |
This PR remove `@[expose]` from public sections when there are no `(irredcible_)def`'s inside the section anyways, so there is no reason to expose the section (does not make a difference).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
merge-conflict
|
147/147 |
Mathlib/Algebra/Category/ModuleCat/ChangeOfRingsExact.lean,Mathlib/Algebra/Category/ModuleCat/Ext/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Adjunction.lean,Mathlib/Algebra/Category/Ring/Small.lean,Mathlib/Algebra/Field/Basic.lean,Mathlib/Algebra/Field/MinimalAxioms.lean,Mathlib/Algebra/Field/Opposite.lean,Mathlib/Algebra/Field/Rat.lean,Mathlib/Algebra/Field/ULift.lean,Mathlib/Algebra/Field/ZMod.lean,Mathlib/Algebra/Group/Action/Option.lean,Mathlib/Algebra/Group/Action/Sigma.lean,Mathlib/Algebra/Group/Action/Sum.lean,Mathlib/Algebra/Group/Action/Units.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Group/Submonoid/MulAction.lean,Mathlib/Algebra/HierarchyDesign.lean,Mathlib/Algebra/Homology/ModelCategory/Injective.lean,Mathlib/Algebra/Module/Projective.lean,Mathlib/Algebra/Module/Submodule/Basic.lean,Mathlib/Algebra/MonoidAlgebra/PointwiseSMul.lean,Mathlib/Algebra/NonAssoc/LieAdmissible/Defs.lean,Mathlib/Algebra/Notation/Pi/Defs.lean,Mathlib/Algebra/Notation/Prod.lean,Mathlib/Algebra/Order/Antidiag/Tendsto.lean,Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Algebra/Order/Floor/Div.lean,Mathlib/Algebra/Order/Group/Action/End.lean,Mathlib/Algebra/Order/Group/End.lean,Mathlib/Algebra/Order/Group/PosPart.lean,Mathlib/Algebra/Order/Kleene.lean,Mathlib/Algebra/Order/Nonneg/Lattice.lean,Mathlib/Algebra/Order/Pi.lean,Mathlib/Algebra/Order/Ring/Unbundled/Rat.lean,Mathlib/Algebra/Ring/Commute.lean,Mathlib/Algebra/Star/TransferInstance.lean,Mathlib/AlgebraicGeometry/Birational/Dominant.lean,Mathlib/AlgebraicTopology/ModelCategory/Over.lean,Mathlib/AlgebraicTopology/SimplicialSet/AnodyneExtensions/Inner/PushoutProduct.lean,Mathlib/AlgebraicTopology/SimplicialSet/AnodyneExtensions/PushoutProduct.lean,Mathlib/Analysis/Calculus/TaylorIntegral.lean,Mathlib/Analysis/InnerProductSpace/Coalgebra.lean,Mathlib/Analysis/Normed/Algebra/TrivSqZeroExt.lean,Mathlib/Analysis/Normed/Group/Constructions.lean,Mathlib/Analysis/Normed/Module/MStructure.lean,Mathlib/Analysis/Normed/Operator/Compact/FiniteDimension.lean,Mathlib/Analysis/ODE/DiscreteGronwall.lean,Mathlib/Analysis/ODE/ExistUnique.lean,Mathlib/Analysis/Polynomial/Norm.lean,Mathlib/CategoryTheory/Adjunction/ParametrizedLimits.lean,Mathlib/CategoryTheory/Comma/CatCommSq.lean,Mathlib/CategoryTheory/Localization/DerivabilityStructure/OfLocalizedEquivalences.lean,Mathlib/CategoryTheory/MarkovCategory/Positive.lean,Mathlib/CategoryTheory/Monoidal/Cartesian/Normal.lean,Mathlib/CategoryTheory/Monoidal/Functor/Types.lean,Mathlib/CategoryTheory/Monoidal/Types/Coyoneda.lean,Mathlib/CategoryTheory/MorphismProperty/LocalClosure.lean,Mathlib/CategoryTheory/Preadditive/Comma.lean,Mathlib/CategoryTheory/Preadditive/Injective/InjectiveObject.lean,Mathlib/CategoryTheory/Sites/CoversTop/Over.lean,Mathlib/CategoryTheory/Sites/Precoverage/Generates.lean,Mathlib/Combinatorics/Additive/FreimanHom.lean,Mathlib/Computability/AkraBazzi/AkraBazzi.lean,Mathlib/Data/ENNReal/Action.lean,Mathlib/Data/ENat/Pow.lean,Mathlib/Data/Finsupp/Pointwise.lean,Mathlib/Data/Finsupp/PointwiseSMul.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/FunLike/Embedding.lean,Mathlib/Data/FunLike/Equiv.lean,Mathlib/Data/FunLike/Ring.lean,Mathlib/Data/Int/Cast/Pi.lean,Mathlib/Data/LawfulXor.lean,Mathlib/Data/List/Monad.lean,Mathlib/Data/Prod/Lex.lean,Mathlib/Data/Rat/Cast/Defs.lean,Mathlib/Data/Rat/Cast/OfScientific.lean,Mathlib/Data/Sigma/Order.lean,Mathlib/Data/ZMod/IntUnitsPower.lean,Mathlib/GroupTheory/Congruence/Star.lean,Mathlib/GroupTheory/GroupAction/Embedding.lean,Mathlib/GroupTheory/IsPerfect.lean,Mathlib/GroupTheory/ResiduallyFinite.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Star.lean,Mathlib/LinearAlgebra/Matrix/GeneralLinearGroup/MvPolynomial.lean,Mathlib/LinearAlgebra/Matrix/HadamardMatrix.lean,Mathlib/LinearAlgebra/Projectivization/PSL/PSL2.lean,Mathlib/LinearAlgebra/RootSystem/GeckConstruction/Semisimple.lean,Mathlib/MeasureTheory/Function/L2Space.lean,Mathlib/MeasureTheory/Function/LpSpace/CompleteOfCompleteLp.lean,Mathlib/MeasureTheory/Integral/IntegralEqImproper.lean,Mathlib/MeasureTheory/Measure/Sub.lean,Mathlib/MeasureTheory/Measure/Typeclasses/ZeroOne.lean,Mathlib/MeasureTheory/VectorMeasure/SetIntegral.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Summable.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Transform.lean,Mathlib/NumberTheory/NumberField/ExistsRamified.lean,Mathlib/NumberTheory/Padics/PadicVal/Defs.lean,Mathlib/NumberTheory/RamificationInertia/Valuation.lean,Mathlib/Order/ConditionallyCompleteLattice/Basic.lean |
147 |
8 |
['JovanGerb', 'felixpernegger', 'github-actions', 'grunweg', 'mathlib-merge-conflicts', 'themathqueen'] |
JovanGerb assignee:JovanGerb |
5-43275 5 days ago |
5-43276 5 days ago |
6-56356 6 days |
| 41427 |
YaelDillies author:YaelDillies |
refactor(Algebra/MvPolynomial): delete `coeff` |
... without a deprecation because we want dot notation to resolve to `AddMonoidAlgebra.coeff`.
For migration, replace bare `MvPolynomial.coeff`s with `AddMonoidAlgebra.coeff`. Dot notation `.coeff` will resolve to `AddMonoidAlgebra.coeff` without further change. `MvPolynomial.coeff m p` corresponds to `AddMonoidAlgebra.coeff p m`, so you will need to swap arguments. Note further that `AddMonoidAlgebra.coeff p` is bundled as a `Finsupp` while `MvPolynomial.coeff` is a bare function.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
label:t-algebra$ |
243/245 |
Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Division.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/MvPolynomial/Eval.lean,Mathlib/Algebra/MvPolynomial/Funext.lean,Mathlib/Algebra/MvPolynomial/Monad.lean,Mathlib/Algebra/MvPolynomial/Nilpotent.lean,Mathlib/Algebra/MvPolynomial/NoZeroDivisors.lean,Mathlib/Algebra/MvPolynomial/PDeriv.lean,Mathlib/Algebra/MvPolynomial/Rename.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Combinatorics/Nullstellensatz.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/RingTheory/Extension/Generators.lean,Mathlib/RingTheory/Extension/Presentation/Basic.lean,Mathlib/RingTheory/MvPolynomial/Basic.lean,Mathlib/RingTheory/MvPolynomial/FreeCommRing.lean,Mathlib/RingTheory/MvPolynomial/Groebner.lean,Mathlib/RingTheory/MvPolynomial/Homogeneous.lean,Mathlib/RingTheory/MvPolynomial/IrreducibleQuadratic.lean,Mathlib/RingTheory/MvPolynomial/MonomialOrder.lean,Mathlib/RingTheory/MvPolynomial/WeightedHomogeneous.lean,Mathlib/RingTheory/MvPowerSeries/Basic.lean,Mathlib/RingTheory/MvPowerSeries/Trunc.lean,Mathlib/RingTheory/NoetherNormalization.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Polynomial/IsIntegral.lean,Mathlib/RingTheory/Polynomial/Quotient.lean,Mathlib/RingTheory/Spectrum/Prime/Polynomial.lean,Mathlib/RingTheory/TensorProduct/MvPolynomial.lean |
35 |
11 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
nobody |
5-33930 5 days ago |
5-35434 5 days ago |
14-5072 14 days |
| 38799 |
YaelDillies author:YaelDillies |
refactor(Combinatorics/Additive/Energy): switch to the compact normalisation |
In additive combinatorics, it is natural for the group of study to be considered with its compact normalisation (making it have total mass 1) and its dual group to be considered with its discrete normalisation (so that each singleton has mass 1), instead of the other way around and even when both groups are finite.
In this case, I will soon generalise the energy to compact abelian groups, and possibly even to all abelian groups equipped with a mean. This PR is a first step towards that by renormalising the energy to be between 0 and 1.
From AddCombi
---
- [ ] depends on: #38751
[](https://gitpod.io/from-referrer/)
|
blocked-by-other-PR
t-combinatorics
large-import
tech debt
|
211/96 |
Mathlib/Algebra/Order/Field/Rat.lean,Mathlib/Algebra/Order/Ring/NNRat.lean,Mathlib/Algebra/Order/Ring/Rat.lean,Mathlib/Combinatorics/Additive/Energy.lean,Mathlib/Combinatorics/SetFamily/LYM.lean,Mathlib/Data/Finset/Density.lean,Mathlib/Data/NNRat/Defs.lean,Mathlib/Data/NNRat/Floor.lean,Mathlib/Data/NNRat/Order.lean,Mathlib/Data/Rat/Star.lean,Mathlib/RingTheory/Binomial.lean,Mathlib/Topology/Instances/Rat.lean |
12 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
5-27231 5 days ago |
82-23508 82 days ago |
0-11 11 seconds |
| 39755 |
wwylele author:wwylele |
chore(GroupTheory): remove a defeq abuse |
---
I am not sure if this is the right change to make, so I'd like to start a discussion from this. The issue here seems to be that the simp lemma [MulAction.orbitRel.Quotient.orbit_mk](https://leanprover-community.github.io/mathlib4_docs/Mathlib/GroupTheory/GroupAction/Defs.html#MulAction.orbitRel.Quotient.orbit_mk) fired and changed the underlying type of variables in the expression, which is not defeq at instance transparency, and fails defeq check for `MulAction` ([MulAction.instElemOrbit](https://leanprover-community.github.io/mathlib4_docs/Mathlib/GroupTheory/GroupAction/Defs.html#MulAction.instElemOrbit) vs [MulAction.instElemOrbit_1](https://leanprover-community.github.io/mathlib4_docs/Mathlib/GroupTheory/GroupAction/Defs.html#MulAction.instElemOrbit_1)). The easy change here is to disable the offending simp, but it feels like a common language pitfall. Should we do either of the following instead?
- remove `MulAction.orbitRel.Quotient.orbit_mk` from default simp set
- Make the the orbit definition more transparent
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-group-theory
awaiting-author
|
1/2 |
Mathlib/GroupTheory/GroupAction/Basic.lean |
1 |
1 |
['Multramate', 'github-actions', 'joneugster'] |
nobody |
5-16877 5 days ago |
5-16877 5 days ago |
54-54937 54 days |
| 41110 |
felixpernegger author:felixpernegger |
chore: remove remaining `warning.simp.varHead` exceptions |
These are all who remain (tech debt)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
|
25/11 |
Mathlib/CategoryTheory/Sites/Precoverage.lean |
1 |
3 |
['felixpernegger', 'github-actions', 'jkandel1', 'mathlib-merge-conflicts'] |
nobody |
5-6250 5 days ago |
5-5742 5 days ago |
19-25891 19 days |
| 40392 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Integral/Lebesgue/Basic): fix an `erw` |
Extracted from #40348.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
tech debt
maintainer-merge
|
11/1 |
Mathlib/Data/ENNReal/Operations.lean,Mathlib/MeasureTheory/Integral/Lebesgue/Basic.lean |
2 |
5 |
['felixpernegger', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
5-5372 5 days ago |
5-7481 5 days ago |
36-17671 36 days |
| 38931 |
FordUniver author:FordUniver |
chore(Combinatorics/SimpleGraph/Copy): replace classical `Fintype.card` with `Nat.card` |
Replaces definitions of `copyCount` and `unlabeledCopyCount` with `Nat.card` instead of `Fintype.card` as well as several `Fintype` occurrences with `Finite`. The body of `uniqueUnlabeledCopyBot` is restructured to use `Finite.injective_iff_surjective` since the `Fintype.card_congr` route no longer applies under the weakened `[Finite W]` hypothesis. Adds public `copyCount_eq_nat_card` and `unlabeledCopyCount_eq_nat_card` bridge lemmas so downstream files can characterize the counts (e.g. for `Nat.card_le_card_of_injective` bridging in `InducedCopy.lean`) without unfolding.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
**Step 4/5 of the `Copy` / `InducedCopy` refactor-feat stack.**
As suggested in #38631 by @SnirBroshi and @YaelDillies. I went with `Nat` over `ENat` based on Yael's preference (but I think that could easily be changed to `ENat`). Quite a bit of churn was needed as a consequence.
- [ ] depends on: #38843
Diff for the changes *just* in this PR over its predecessor: [link](https://github.com/FordUniver/mathlib4/compare/chore/copy-expose...chore/copy-nat-card) |
new-contributor
t-combinatorics
large-import
blocked-by-other-PR
tech debt
|
281/257 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean |
1 |
9 |
['FordUniver', 'SnirBroshi', 'github-actions', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
4-81331 4 days ago |
79-4481 79 days ago |
0-2006 33 minutes |
| 38631 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/InducedCopy): add `UnlabeledEmbedding`, `unlabeledEmbeddingCount` and `embeddingCount` |
Extracts the induced-containment material from `SimpleGraph/Copy.lean` into a new `SimpleGraph/InducedCopy.lean` and adds the induced analogues of `UnlabeledCopy`/`copyCount`/`unlabeledCopyCount`: a type `UnlabeledEmbedding G H` for induced subgraphs of `H` isomorphic to `G`, a count `H.embeddingCount G := Nat.card (G ↪g H)` for induced labeled copies (i.e. graph embeddings), and a count `H.unlabeledEmbeddingCount G := Nat.card (G.UnlabeledEmbedding H)` for induced unlabelled copies, each with the parallel `_of_isEmpty` / `_eq_zero` / `_pos` / `_le_*` / `_eq_nat_card` API. `IsIndContained`, the `⊴` notation, `IndFree`, and all related lemmas move from `Copy.lean` to the new file. `Embedding.range_toSubgraph` characterises induced subgraphs as the range of `Embedding.toSubgraph : (G ↪g H) → H.Subgraph` and bridges `embeddingCount` to `unlabeledEmbeddingCount`.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
**Final step 5/5 of the `Copy` / `InducedCopy` refactor stack.**
The new file mirrors `Copy.lean`'s organisation (containment → counting → killing sections) for the induced row; the killing-induced-copies machinery is left as a TODO. Naming follows the convention established in #38745: types are guest-first (`UnlabeledEmbedding G H`, `IsIndContained G H`), operations host-first (`H.embeddingCount G`, `H.unlabeledEmbeddingCount G`). The induced labelled type is `Embedding`, i.e., `G ↪g H`, directly. Two bookkeeping changes in `Copy.lean`: `Copy.isContained` / `Embedding.isContained` / `Iso.isContained`/`'` and `isContained_iff_exists_le_comap`, which lived in the now-deleted "Induced containment" section but are non-induced, move up into the `IsContained` section.
`LineGraph.lean`'s `Copy` import switches to `InducedCopy` since it uses `IsIndContained`. The cross-module proofs `embeddingCount_le_copyCount` and `unlabeledEmbeddingCount_le_unlabeledCopyCount` bridge through the public `copyCount_eq_nat_card`/`unlabeledCopyCount_eq_nat_card` lemmas introduced in #38931 (the counts themselves remain unexposed per @plp127's review). `Embedding.ofIsInduced` (used by `Embedding.range_toSubgraph`) comes from the independent prerequisite #39288.
| | labeled | unlabeled |
|---|---|---|
| ordinary | `Copy` / `copyCount` | `UnlabeledCopy` / `unlabeledCopyCount` |
| induced | `Embedding` / `embeddingCount` | `UnlabeledEmbedding` / `unlabeledEmbeddingCount` |
This branch sits on top of an octopus-merge diffbase (`FordUniver:diffbase/ind-copy-count`) of `chore/copy-nat-card` and `feat/subgraph-ofIsInduced`, so the link below shows only the changes intrinsic to this PR.
- [ ] depends on: #38931
- [ ] depends on: #39288
Diff for the changes *just* in this PR over its predecessors: [link](https://github.com/FordUniver/mathlib4/compare/diffbase/ind-copy-count...feat/ind-copy-count).
|
t-combinatorics
new-contributor
blocked-by-other-PR
large-import
tech debt
|
644/342 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Copy.lean,Mathlib/Combinatorics/SimpleGraph/InducedCopy.lean,Mathlib/Combinatorics/SimpleGraph/LineGraph.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
5 |
45 |
['FordUniver', 'SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'plp127'] |
nobody |
4-80725 4 days ago |
82-28783 82 days ago |
2-46521 2 days |
| 38843 |
FordUniver author:FordUniver |
chore(Combinatorics/SimpleGraph/Copy): replace file-wide `@[expose]` with selective exposure |
Removes the file-wide `@[expose] public section` and restores selective `@[expose]` only on the small constructive `def`s that need cross-module reduction: `Copy.toEmbedding`, `Copy.id`, `Copy.ofLE`, `Copy.topEmbedding` — each has an exported `@[simp]` lemma proved by `rfl` that needs the definition unfolded to typecheck. Replaces `@[simps!]` on `topEmbedding` with an explicit `@[simp] topEmbedding_apply` to avoid a private `_proof_1` term leaking into generated lemma names; adds `toEmbedding_apply` to match the existing `toHom_apply`. Switches `IsIndContained` from `def` to `abbrev` so the structural alias `Nonempty (G ↪g H)` stays transparent, matching `IsContained` and `Free`.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
**Step 3/5 of the `Copy` / `InducedCopy` refactor-feat stack.**
The noncomputable counts `copyCount` and `unlabeledCopyCount` are deliberately *not* exposed (see [@plp127's review](https://github.com/leanprover-community/mathlib4/pull/38631#discussion_r3161902380) on #38631 explaining that unfolding a `classical`-`Fintype.card` body is rarely what you want); the downstream consumers in #38631 bridge via public `*_eq_nat_card` lemmas introduced in #38931 instead.
- [ ] depends on: #38745
Diff for the changes *just* in this PR over its predecessor: [link](https://github.com/FordUniver/mathlib4/compare/chore/copy-spelling...chore/copy-expose)
|
t-combinatorics
new-contributor
blocked-by-other-PR
tech debt
|
251/246 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean |
1 |
6 |
['github-actions', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
4-79983 4 days ago |
70-17224 70 days ago |
0-76500 21 hours |
| 41864 |
kebekus author:kebekus |
feat: estimate for logarithmic counting functions |
In preparation to the proof of the "Lemma of Logarithmic Derivatives" of Value Distribution Theory, establish the standard "Counting Estimate" for the logarithmic counting function. Simplify and streamline the API for restrictions of divisors a little.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
LLM-generated
|
124/15 |
Mathlib/Analysis/Complex/ValueDistribution/FirstMainTheorem.lean,Mathlib/Analysis/Complex/ValueDistribution/LogCounting/Basic.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
1 |
['github-actions'] |
nobody |
4-73425 4 days ago |
4-73425 4 days ago |
4-72890 4 days |
| 40033 |
JJYYY-JJY author:JJYYY-JJY |
chore: remove flexible linter suppressions |
Replace `simp; infer_instance` with explicit proofs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
tech debt
maintainer-merge
|
6/6 |
Mathlib/Dynamics/TopologicalEntropy/DynamicalEntourage.lean,Mathlib/Topology/UniformSpace/Ultra/Constructions.lean |
2 |
18 |
['JJYYY-JJY', 'chenson2018', 'github-actions', 'grunweg', 'joneugster', 'mathlib-merge-conflicts', 'vihdzp'] |
joneugster assignee:joneugster |
4-73068 4 days ago |
4-73068 4 days ago |
46-19697 46 days |
| 41874 |
b-mehta author:b-mehta |
chore(Order/Antidiag/Pi): review API and remove backward options |
This PR golfs some proofs, removes local notation (which means the theorem displays more nicely in Loogle + docs), and removes some `set_option backward.isDefEq.respectTransparency.types false in`.
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
13/26 |
Mathlib/Algebra/Order/Antidiag/Pi.lean |
1 |
1 |
['github-actions'] |
nobody |
4-64138 4 days ago |
4-65590 4 days ago |
4-65055 4 days |
| 38039 |
themathqueen author:themathqueen |
chore(Topology): `UniformSpace.Completion` renames for morphisms |
This PR renames the following `UniformSpace.Completion` morphisms.
The `UniformSpace` namespace remains for ring morphisms and functions so that we're clear which completion we're talking about. For isometries, `UniformEquiv`s, `NormedAddGroupHom`s, there's no need for the `UniformSpace` namespace.
For the isometry definitions, we used `Isometry.ringHom{FromCompletion, Completion}` instead of `RingHom.Isometry.{fromCompletion, completion}` so that it won't clash with the function versions (`Isometry.{fromCompletion, completion}`).
RingHom
- [ ] `UniformSpace.Completion.mapRingHom` -> `UniformSpace.RingHom.toCompletion`
- [ ] `UniformSpace.Completion.extensionHom` -> `UniformSpace.RingHom.fromCompletion`
RingEquiv
- [ ] `UniformSpace.Completion.mapRingEquiv` -> `UniformSpace.RingEquiv.completion`
NormedAddGroupHom
- [ ] `NormedAddGroupHom.extension` -> `NormedAddGroupHom.fromCompletion`
RingHom isometries
- [ ] `Isometry.extensionHom` -> `Isometry.ringHomFromCompletion`
- [ ] `Isometry.mapRingHom` -> `Isometry.ringHomCompletion`
isometries
- [ ] `Isometry.completion_extension` -> `Isometry.fromCompletion`
- [ ] `Isometry.completion_map` -> `Isometry.completion`
Functions
- [ ] `UniformSpace.Completion.extension` -> `UniformSpace.Function.fromCompletion`
- [ ] `UniformSpace.Completion.map` -> `UniformSpace.Function.completion`
UniformEquiv
- [ ] `UniformSpace.Completion.mapEquiv` -> `UniformEquiv.completion`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
See Zulip thread: [#mathlib4 > naming convention: `UniformSpace.Completion` morphisms](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/naming.20convention.3A.20.60UniformSpace.2ECompletion.60.20morphisms)
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
|
385/230 |
Mathlib/Analysis/InnerProductSpace/Completion.lean,Mathlib/Analysis/Normed/Field/WithAbs.lean,Mathlib/Analysis/Normed/Group/Completion.lean,Mathlib/Analysis/Normed/Group/HomCompletion.lean,Mathlib/Analysis/Normed/Group/SemiNormedGrp/Completion.lean,Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean,Mathlib/NumberTheory/NumberField/Completion/InfinitePlace.lean,Mathlib/NumberTheory/NumberField/Completion/LiesOverInstances.lean,Mathlib/NumberTheory/Padics/Complex.lean,Mathlib/NumberTheory/Padics/HeightOneSpectrum.lean,Mathlib/NumberTheory/Padics/WithVal.lean,Mathlib/RingTheory/DedekindDomain/AdicValuation.lean,Mathlib/RingTheory/LaurentSeries.lean,Mathlib/Topology/Algebra/GroupCompletion.lean,Mathlib/Topology/Algebra/LinearMapCompletion.lean,Mathlib/Topology/Algebra/UniformMulAction.lean,Mathlib/Topology/Algebra/UniformRing.lean,Mathlib/Topology/Algebra/Valued/ValuedField.lean,Mathlib/Topology/Algebra/Valued/WithVal.lean,Mathlib/Topology/Category/UniformSpace.lean,Mathlib/Topology/MetricSpace/Completion.lean,Mathlib/Topology/UniformSpace/Completion.lean |
22 |
8 |
['github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'themathqueen'] |
ADedecker assignee:ADedecker |
4-63036 4 days ago |
4-64436 4 days ago |
23-60119 23 days |
| 41741 |
pechersky author:pechersky |
chore(Algebra/*/NonUnital*): split nonassoc and assoc nonunital `center` instances |
There is a diamond from how Subsemigroup.center defines mul and implies associativity and commutativity. So over a non-assoc parent type, the instance one gets differs than if you already had associativity. When/if we set up positive nat powers, there will be a diamond.
So at least prepare for that world by having the overriding instances in the "happy path" case.
---
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
Discovered while working on https://github.com/leanprover-community/mathlib4/pull/40785.
Used GPT 5.6 Terra to classify hunks from the originating PR and do the cherry-pick operations. |
t-algebra
t-ring-theory
tech debt
awaiting-author
label:t-algebra$ |
92/32 |
Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Star/NonUnitalSubalgebra.lean,Mathlib/RingTheory/NonUnitalSubring/Basic.lean,Mathlib/RingTheory/NonUnitalSubsemiring/Basic.lean |
4 |
2 |
['github-actions', 'j-loreaux'] |
j-loreaux assignee:j-loreaux |
4-57561 4 days ago |
4-57563 4 days ago |
3-26650 3 days |
| 27050 |
BoltonBailey author:BoltonBailey |
doc(Control/Monad/Cont): add docstrings |
Split of #25917. This PR adds docstrings to this file.
This documentation was written by a few versions of Claude (Claude 3.5 Sonnet and Fable 5) , with human supervision.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-data
LLM-generated
tech debt
|
62/20 |
Mathlib/Control/Monad/Cont.lean,scripts/nolints.json |
2 |
10 |
['BoltonBailey', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
4-42882 4 days ago |
373-59060 373 days ago |
0-84441 23 hours |
| 41457 |
NoahW314 author:NoahW314 |
feat(Algebra/Group/Units/Basic): deduplicate lemmas by generalizing to `IsDedekindFiniteMonoid` |
Generalize a group of lemmas to `IsDedekindFiniteMonoid` which previously had versions for `CommMonoid`, `LeftCancelMonoid`, `RightCancelMonoid`, `CancelMonoid`, and `Ordinal`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
30/86 |
Mathlib/Algebra/AffineMonoid/Irreducible.lean,Mathlib/Algebra/Group/Units/Basic.lean,Mathlib/AlgebraicTopology/SimplicialSet/Horn.lean,Mathlib/Combinatorics/Enumerative/DyckWord.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Exponential.lean,scripts/nolints_prime_decls.txt |
7 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
3-86383 3 days ago |
4-2790 4 days ago |
14-55350 14 days |
| 41731 |
mpacholski author:mpacholski |
feat(Topology/Algebra/Module/Spaces/ContinuousLinearMap): convert `toLinearMap₁₂` to a linear map |
Convert the projection `toLinearMap₁₂` (which strips the topology from a continuous semibilinear map) to a linear map, by showing that it preserves addition and scalar multiplication, and mark it with `@[simp apply]` absorb the `toLinearMap₁₂_apply` lemma.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
tech debt
|
11/9 |
Mathlib/Analysis/Fourier/FourierTransformDeriv.lean,Mathlib/MeasureTheory/Measure/CharacteristicFunction/TaylorExpansion.lean,Mathlib/Topology/Algebra/Module/Spaces/ContinuousLinearMap.lean |
3 |
23 |
['github-actions', 'mpacholski', 'pechersky', 'themathqueen'] |
nobody |
3-67937 3 days ago |
3-69297 3 days ago |
5-26276 5 days |
| 41903 |
felixpernegger author:felixpernegger |
chore: simplify proofs with `grind` |
These all come from the [weekly linting log](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log) "Info messages count".
Note that that counter has two false positives which arise due to "all_goals". These are not included here obviously, but all others are (can undo some if they seriously hurt performance).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
10/40 |
Mathlib/Algebra/Polynomial/RuleOfSigns.lean,Mathlib/AlgebraicTopology/SimplexCategory/ToMkOne.lean,Mathlib/Analysis/Calculus/Taylor.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Analysis/SpecialFunctions/Stirling.lean,Mathlib/Combinatorics/Hypergraph/Basic.lean,Mathlib/Data/List/Defs.lean,Mathlib/LinearAlgebra/AffineSpace/Simplex/Basic.lean,Mathlib/MeasureTheory/MeasurableSpace/Defs.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/MeasureTheory/SetSemiring.lean,Mathlib/NumberTheory/LucasLehmer.lean,Mathlib/Order/CountableSupClosed.lean,Mathlib/Probability/Moments/SubGaussian.lean,Mathlib/Probability/Process/LocalProperty.lean,Mathlib/RingTheory/MvPowerSeries/GaussNorm.lean,Mathlib/Topology/Order/Basic.lean |
18 |
8 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'vlad902'] |
nobody |
2-33156 2 days ago |
3-69964 3 days ago |
3-69448 3 days |
| 41878 |
felixpernegger author:felixpernegger |
chore(Order): fix defs with underscore in their names |
Per naming convention, defs should have underscores in their name. This is also counted as strong technical debt, according to the counter we have 493 right now.
This PR fixes all of them in Mathlib/Order except one, namely [RelIso.Simps.symm_apply](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/RelIso/Basic.html#RelIso.Simps.symm_apply), which is a bit weird.
All renames here are quite simple, just go from `snake_case` to `lowerCamelCase` (+ add deprecations).
If this PR looks good, i would be happy to do this to the (vast majority of) other defs with underscore in mathlib. :)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-order
|
64/40 |
Mathlib/Algebra/Lie/Semisimple/Basic.lean,Mathlib/Data/Set/Lattice.lean,Mathlib/MeasureTheory/Constructions/BorelSpace/Order.lean,Mathlib/Order/BooleanGenerators.lean,Mathlib/Order/Category/NonemptyFinLinOrd.lean,Mathlib/Order/Filter/Ker.lean,Mathlib/Order/GaloisConnection/Basic.lean,Mathlib/Order/LiminfLimsup.lean |
8 |
1 |
['github-actions'] |
nobody |
2-8761 2 days ago |
4-46681 4 days ago |
4-46146 4 days |
| 36239 |
plp127 author:plp127 |
feat(FieldTheory/KrullTopology): define uniform group structure on galois group |
Endow the galois group of a field extension `Gal(L/K)` with the structure of a uniform group. Use this to prove some properties of the galois group earlier, for example, that the galois group is compact is immediate, and in more generality than the version proved in `FieldTheory/Galois/Profinite`. Deprecate some material which used to be used to define the krull topology, but is now unused since the krull topology comes out of the uniform structure.
---
- [x] depends on: #39759
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
281/213 |
Mathlib/FieldTheory/Galois/Infinite.lean,Mathlib/FieldTheory/Galois/Profinite.lean,Mathlib/FieldTheory/KrullTopology.lean,Mathlib/NumberTheory/Cyclotomic/CyclotomicCharacter.lean |
4 |
25 |
['acmepjz', 'dagurtomas', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'plp127', 'vihdzp'] |
mattrobball assignee:mattrobball |
1-77362 1 day ago |
1-78658 1 day ago |
63-42974 63 days |
| 41136 |
mathlib-nolints author:mathlib-nolints |
chore: remove unnecessary set_option lines |
I removed 3183 unnecessary `set_option` line(s) across 1148 file(s).
---
[workflow run for this PR](https://github.com/leanprover-community/mathlib4/actions/runs/29708241311) |
auto-merge-after-CI
tech debt
merge-conflict
|
0/3183 |
Archive/Imo/Imo1987Q1.lean,Counterexamples/MapFloor.lean,Counterexamples/ZeroDivisorsInAddMonoidAlgebras.lean,Mathlib/Algebra/Algebra/Epi.lean,Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/Algebra/Algebra/NonUnitalHom.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Opposite.lean,Mathlib/Algebra/Algebra/Spectrum/Quasispectrum.lean,Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Algebra/Subalgebra/Directed.lean,Mathlib/Algebra/Algebra/Subalgebra/Lattice.lean,Mathlib/Algebra/BigOperators/Expect.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/BigOperators/Group/Multiset/Basic.lean,Mathlib/Algebra/Category/AlgCat/Basic.lean,Mathlib/Algebra/Category/AlgCat/FilteredColimits.lean,Mathlib/Algebra/Category/AlgCat/TensorAlgebra.lean,Mathlib/Algebra/Category/FGModuleCat/Basic.lean,Mathlib/Algebra/Category/Grp/AB.lean,Mathlib/Algebra/Category/Grp/Colimits.lean,Mathlib/Algebra/Category/Grp/EpiMono.lean,Mathlib/Algebra/Category/Grp/Images.lean,Mathlib/Algebra/Category/Grp/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Adjunctions.lean,Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/ChangeOfRings.lean,Mathlib/Algebra/Category/ModuleCat/Colimits.lean,Mathlib/Algebra/Category/ModuleCat/Differentials/Presheaf.lean,Mathlib/Algebra/Category/ModuleCat/FilteredColimits.lean,Mathlib/Algebra/Category/ModuleCat/Images.lean,Mathlib/Algebra/Category/ModuleCat/LeftResolution.lean,Mathlib/Algebra/Category/ModuleCat/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Adjunction.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Closed.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/ColimitFunctor.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Free.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Monoidal.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Free.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Quasicoherent.lean,Mathlib/Algebra/Category/ModuleCat/Stalk.lean,Mathlib/Algebra/Category/ModuleCat/Ulift.lean,Mathlib/Algebra/Category/Ring/Constructions.lean,Mathlib/Algebra/Category/Ring/FilteredColimits.lean,Mathlib/Algebra/Category/Ring/Topology.lean,Mathlib/Algebra/Central/Basic.lean,Mathlib/Algebra/Colimit/DirectLimit.lean,Mathlib/Algebra/Colimit/Module.lean,Mathlib/Algebra/Colimit/Ring.lean,Mathlib/Algebra/DirectSum/Basic.lean,Mathlib/Algebra/DirectSum/Internal.lean,Mathlib/Algebra/DirectSum/Module.lean,Mathlib/Algebra/DirectSum/Ring.lean,Mathlib/Algebra/FreeAlgebra.lean,Mathlib/Algebra/GCDMonoid/Basic.lean,Mathlib/Algebra/Group/Subgroup/Map.lean,Mathlib/Algebra/Group/Subgroup/ZPowers/Basic.lean,Mathlib/Algebra/GroupWithZero/ProdHom.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/Algebra/Homology/CochainComplexOpposite.lean,Mathlib/Algebra/Homology/ComplexShapeSigns.lean,Mathlib/Algebra/Homology/DerivedCategory/ExactFunctor.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/EnoughInjectives.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/EnoughProjectives.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/Map.lean,Mathlib/Algebra/Homology/DerivedCategory/Plus.lean,Mathlib/Algebra/Homology/DifferentialObject.lean,Mathlib/Algebra/Homology/Embedding/ExtendHomology.lean,Mathlib/Algebra/Homology/ExactSequenceFour.lean,Mathlib/Algebra/Homology/HomologySequenceLemmas.lean,Mathlib/Algebra/Homology/Homotopy.lean,Mathlib/Algebra/Homology/HomotopyCategory/HomComplex.lean,Mathlib/Algebra/Homology/HomotopyCategory/HomComplexCohomology.lean,Mathlib/Algebra/Homology/HomotopyCategory/HomComplexShift.lean,Mathlib/Algebra/Homology/HomotopyCategory/HomComplexSingle.lean,Mathlib/Algebra/Homology/HomotopyCategory/KInjective.lean,Mathlib/Algebra/Homology/HomotopyCategory/MappingCone.lean,Mathlib/Algebra/Homology/HomotopyCategory/Plus.lean,Mathlib/Algebra/Homology/HomotopyCategory/Shift.lean,Mathlib/Algebra/Homology/HomotopyCofiber.lean,Mathlib/Algebra/Homology/LeftResolution/Reduced.lean,Mathlib/Algebra/Homology/Monoidal.lean,Mathlib/Algebra/Homology/Opposite.lean,Mathlib/Algebra/Homology/QuasiIso.lean,Mathlib/Algebra/Homology/ShortComplex/Ab.lean,Mathlib/Algebra/Homology/ShortComplex/Abelian.lean,Mathlib/Algebra/Homology/ShortComplex/Basic.lean,Mathlib/Algebra/Homology/ShortComplex/Exact.lean,Mathlib/Algebra/Homology/ShortComplex/FunctorEquivalence.lean,Mathlib/Algebra/Homology/ShortComplex/HomologicalComplex.lean,Mathlib/Algebra/Homology/ShortComplex/Homology.lean,Mathlib/Algebra/Homology/ShortComplex/LeftHomology.lean,Mathlib/Algebra/Homology/ShortComplex/ModuleCat.lean,Mathlib/Algebra/Homology/ShortComplex/QuasiIso.lean,Mathlib/Algebra/Homology/ShortComplex/Retract.lean,Mathlib/Algebra/Homology/ShortComplex/RightHomology.lean,Mathlib/Algebra/Homology/Single.lean,Mathlib/Algebra/Homology/SpectralObject/Page.lean |
1148 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
1-70268 1 day ago |
23-49134 23 days ago |
0-1 1 second |
| 41704 |
plp127 author:plp127 |
perf(FieldTheory/CardinalEmb): golf `succEquiv_coherence` |
Replace a big `simp` with `rfl`, which speeds up kernel typechecking and removes a `set_option backward.isDefEq.respectTransparency false`. Remove two `have` lines in `instance (i : ι) : Algebra.IsSeparable (E⟮<i⟯) (E⟮<i⟯⟮b (φ i)⟯)` which speeds up kernel typechecking. See [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/kernelbarfing.20in.20mathlib/near/609873490).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
1/7 |
Mathlib/FieldTheory/CardinalEmb.lean |
1 |
6 |
['github-actions', 'grunweg', 'kbuzzard', 'leanprover-radar', 'mathlib-merge-conflicts'] |
nobody |
1-65236 1 day ago |
1-65737 1 day ago |
8-72915 8 days |
| 40648 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/MeasurableSpace/Constructions): remove some defeq abuse |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
7/2 |
Mathlib/MeasureTheory/MeasurableSpace/Constructions.lean,Mathlib/Order/Disjointed.lean |
2 |
2 |
['github-actions', 'wwylele'] |
nobody |
1-49709 1 day ago |
36-49328 36 days ago |
36-48811 36 days |
| 38200 |
Parcly-Taxel author:Parcly-Taxel |
feat: Turán numbers and their strict monotonicity |
`strictMonoOn_turanNumber` was initially proved by @Aristotle-Harmonic, then hand-polished.
Co-authored-by: Aristotle (Harmonic) <aristotle-harmonic@harmonic.fun> |
t-combinatorics
tech debt
|
45/20 |
Mathlib/Combinatorics/SimpleGraph/Extremal/Turan.lean |
1 |
7 |
['Parcly-Taxel', 'github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
YaelDillies assignee:YaelDillies |
1-46734 1 day ago |
5-38208 5 days ago |
91-10120 91 days |
| 41413 |
YaelDillies author:YaelDillies |
feat(RingTheory/MonoidAlgebra): `toAdditive` as a `BialgEquiv` |
Also add a few missing lemmas about the less bundled versions, make variable names follow the local file convention and explicit a missing argument.
From Toric
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
toric
tech debt
|
90/25 |
Mathlib/Algebra/MonoidAlgebra/Basic.lean,Mathlib/Algebra/MonoidAlgebra/MapDomain.lean,Mathlib/RingTheory/Bialgebra/MonoidAlgebra.lean,Mathlib/RingTheory/FiniteType.lean |
4 |
6 |
['Whysoserioushah', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
1-3866 1 day ago |
5-24766 5 days ago |
15-55631 15 days |
| 41990 |
felixpernegger author:felixpernegger |
chore(CategoryTheory): fix some `nolint simpNF` |
By specifying an `outParam`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-category-theory
|
7/9 |
Mathlib/CategoryTheory/Category/TwoP.lean |
1 |
1 |
['github-actions'] |
nobody |
0-43667 12 hours ago |
0-74195 20 hours ago |
0-73660 20 hours |
| 41981 |
YaelDillies author:YaelDillies |
refactor(Algebra/Polynomial): make into an `abbrev` of `AddMonoidAlgebra` |
... and deprecate the declarations that are now tautological (`toFinsupp`/`ofFinsupp` and their API). For some of the `Polynomial` declarations that needed changing, it was simplest to replace them with the corresponding `AddMonoidAlgebra` one. Note that this replacement is far from exhaustive (a majority of the `Polynomial` API could be replaced this way).
Note that `algebraMap R R[X]` has changed defeq.
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Reworking.20Finsupp.2C.20MonoidAlgebra.2C.20HahnSeries.2E.20PowerSeries/with/609275708)
Generated through several rounds of manual review with Claude Opus. Heavily edited by hand afterwards.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
LLM-generated
label:t-algebra$ |
337/538 |
Mathlib/Algebra/MonoidAlgebra/MapDomain.lean,Mathlib/Algebra/MonoidAlgebra/Support.lean,Mathlib/Algebra/Polynomial/AlgebraMap.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/Algebra/Polynomial/Basis.lean,Mathlib/Algebra/Polynomial/Cardinal.lean,Mathlib/Algebra/Polynomial/Coeff.lean,Mathlib/Algebra/Polynomial/Degree/Defs.lean,Mathlib/Algebra/Polynomial/Degree/IsMonicOfDegree.lean,Mathlib/Algebra/Polynomial/Degree/Operations.lean,Mathlib/Algebra/Polynomial/Degree/Support.lean,Mathlib/Algebra/Polynomial/Derivative.lean,Mathlib/Algebra/Polynomial/Eval/Coeff.lean,Mathlib/Algebra/Polynomial/Eval/Defs.lean,Mathlib/Algebra/Polynomial/Eval/Degree.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/Algebra/Polynomial/GroupRingAction.lean,Mathlib/Algebra/Polynomial/Inductions.lean,Mathlib/Algebra/Polynomial/Laurent.lean,Mathlib/Algebra/Polynomial/Module/Basic.lean,Mathlib/Algebra/Polynomial/Monic.lean,Mathlib/Algebra/Polynomial/Monomial.lean,Mathlib/Algebra/Polynomial/OfFn.lean,Mathlib/Algebra/Polynomial/Reverse.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Algebra/Polynomial/UnitTrinomial.lean,Mathlib/Algebra/Ring/Subring/IntPolynomial.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/LinearAlgebra/Finsupp/VectorSpace.lean,Mathlib/LinearAlgebra/Lagrange.lean,Mathlib/RingTheory/IsAdjoinRoot.lean,Mathlib/RingTheory/KrullDimension/Polynomial.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Polynomial/Opposites.lean,Mathlib/RingTheory/PowerBasis.lean,Mathlib/RingTheory/PowerSeries/Derivative.lean,Mathlib/RingTheory/Spectrum/Prime/Topology.lean,Mathlib/RingTheory/ZariskisMainTheorem.lean,Mathlib/Tactic/ReduceModChar.lean,MathlibTest/InstanceDiamonds.lean |
40 |
4 |
['NoahW314', 'github-actions'] |
nobody |
0-34207 9 hours ago |
0-35949 9 hours ago |
0-37911 10 hours |
| 41995 |
YaelDillies author:YaelDillies |
feat(RingTheory): bialgebra homs `R[G] → R[H]` are in bijection with group homs `G → H` |
... for abelian groups `G` and `H`. Furthermore, the convolution product on bialgebra homs corresponds to pointwise addition on group homs
Also generate more lemmas through `to_additive` and remove some unused `set_option`s.
From Toric
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
toric
large-import
|
329/23 |
Mathlib/RingTheory/Bialgebra/MonoidAlgebra.lean |
1 |
1 |
['github-actions'] |
nobody |
0-33757 9 hours ago |
0-33358 9 hours ago |
0-490 8 minutes |
| 39583 |
WilliamCoram author:WilliamCoram |
refactor: change definition of restricted power series to align with restricted multivariate power series |
Previously, restricted power series were defined in terms of a `tendsto atTop` this has been changed to be an abbrev of `MvPowerSeries.IsRestricted` with `isRestricted_iff` lemmas to convert to nicer usable definitions.
---
- [x] depends on: #32692
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
|
102/138 |
Mathlib/RingTheory/PowerSeries/Restricted.lean |
1 |
12 |
['WilliamCoram', 'github-actions', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'riccardobrasca'] |
riccardobrasca assignee:riccardobrasca |
0-4467 1 hour ago |
0-4483 1 hour ago |
22-46252 22 days |
| 29077 |
grunweg author:grunweg |
feat(Manifold/Instances/Icc): golf smoothness proof using immersions |
Prove that the inclusion of an interval into the real numbers is a smooth embedding,
and use this to golf the proof that this inclusion is smooth.
While at it, rename the smoothness lemmas after the coercion `Subtype.val` they are using,
as mandated by the naming convention.
---
- [x] depends on: #28865
- [x] depends on: #40632
- [x] depends on: #40634
- [x] depends on: #40637
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
tech debt
|
110/52 |
Mathlib/Geometry/Manifold/Instances/Icc.lean,Mathlib/Geometry/Manifold/Instances/Real.lean |
2 |
10 |
['github-actions', 'grunweg', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'ocfnash'] |
ocfnash assignee:ocfnash |
0-4408 1 hour ago |
0-5421 1 hour ago |
9-47242 9 days |
| 38534 |
AlexeyMilovanov author:AlexeyMilovanov |
refactor(Computability): bundle PFun into a structure with FunLike instance |
This PR refactors `PFun` from `def PFun α β := α → Part β` to a structure with a `FunLike` instance.
[Discussion](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Fix.20for.20fun_prop.20on.20PFun.20.28context.3A.20Computability.20Theory.29)
### Main changes
* `PFun` is now a structure with a single field `toFun : α → Part β`.
* Added the `FunLike (α →. β) α (Part β)` instance and `initialize_simps_projections`.
* Added the basic projection/application simp lemmas needed for the structure wrapper.
* Definitions which used to return raw lambdas as partial functions now explicitly use `PFun.mk` or `PFun.lift`.
* Equality proofs for partial functions now use `PFun.ext` / `DFunLike.ext` where `funext` no longer applies directly.
### Downstream impact
The refactor mainly impacts Computability Theory and Category Theory (`Category/PartialFun.lean`). Since `PFun` is no longer definitionally equal to `α → Part β`, tactics such as `rfl`, `simp`, and `funext` can no longer always see through the old raw-function representation.
As a result, several proofs (e.g. `fix_aux`, `ppred`, `mem_eval`, and `unitIso`) grew in size, requiring explicit `ext` + `simp` breakdowns. I tried to keep these proof changes minimal; further golfing suggestions are very welcome. It seems that fully recovering the old brevity in some places may require additional `PFun`-specific API/congruence support, which I avoided adding in this PR to keep the diff minimal.
### Affected files
* **Core:** `Mathlib/Data/PFun.lean`
* **Computability:** `Partrec`, `PartrecBasis`, `PartrecCode`, `RE`, `RecursiveIn`, `Ackermann`, `StateTransition`, `TuringDegree`, `TuringMachine/Config`
* **Category Theory:** `Category/PartialFun.lean`
* **Other:** `Data/Finset/PImage.lean`, `NumberTheory/Dioph.lean`
This also removes the previous `set_option linter.flexible false` workaround and the local transparency workaround in `TuringMachine/Config.lean`, as well as the local transparency workarounds in `Category/PartialFun.lean`.
### Note on LLM usage
The core `PFun` change caused numerous downstream errors. I initially used an LLM to help draft fixes for these files. Afterwards, I spent a significant amount of time manually correcting and modifying all of the generated changes.
|
new-contributor
t-computability
tech debt
awaiting-author
|
525/492 |
Mathlib/CategoryTheory/Category/PartialFun.lean,Mathlib/Computability/Ackermann.lean,Mathlib/Computability/Partrec.lean,Mathlib/Computability/PartrecBasis.lean,Mathlib/Computability/PartrecCode.lean,Mathlib/Computability/RE.lean,Mathlib/Computability/RecursiveIn.lean,Mathlib/Computability/StateTransition.lean,Mathlib/Computability/TuringDegree.lean,Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Data/Finset/PImage.lean,Mathlib/Data/PFun.lean,Mathlib/NumberTheory/Dioph.lean |
13 |
13 |
['AlexeyMilovanov', 'JovanGerb', 'dagurtomas', 'github-actions', 'j-loreaux', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
0-3028 50 minutes ago |
0-12695 3 hours ago |
65-31229 65 days |
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Updated |
Last status change |
total time in review |
| 10721 |
urkud author:urkud |
feat(Order/FunLike): define `PointwiseLE` |
- introduce a mixin class `DFunLike.PointwiseLE`, use it to define `DFunLike.instPartialOrder`;
- add a generic `DFunLike.orderEmbeddingCoe`
- add `DFunLike.PointwiseLE` instances here and there.
With this refactor and #13022, I'm going to generalize lemmas like `MeasureTheory.ae_mono` to `OuterMeasureClass`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [x] depends on: #12983
[](https://gitpod.io/from-referrer/) |
merge-conflict
t-order
t-logic
|
123/50 |
Mathlib.lean,Mathlib/Algebra/Order/Hom/Ring.lean,Mathlib/Data/DFinsupp/Order.lean,Mathlib/Data/Finsupp/Order.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Dynamics/Circle/RotationNumber/TranslationNumber.lean,Mathlib/GroupTheory/Congruence.lean,Mathlib/Order/FunLike.lean,Mathlib/Order/Heyting/Hom.lean,Mathlib/Order/Hom/Basic.lean,Mathlib/Order/Hom/Bounded.lean,Mathlib/Order/Hom/CompleteLattice.lean,Mathlib/Topology/Order/Hom/Basic.lean |
13 |
48 |
['YaelDillies', 'dupuisf', 'urkud'] |
nobody |
721-23676 1 year ago |
771-2078 771 days ago |
64-12984 64 days |
| 8788 |
FMLJohn author:FMLJohn |
feat(Algebra/Module/GradeZeroModule): if `A` is a graded semiring and `M` is a graded `A`-module, then each grade of `M` is a module over the 0-th grade of `A`. |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [ ] depends on: #8187
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
237/4 |
Mathlib.lean,Mathlib/Algebra/DirectSum/Internal.lean,Mathlib/Algebra/GradedMonoid.lean,Mathlib/Algebra/Module/GradeZeroModule.lean,Mathlib/RingTheory/GradedAlgebra/Basic.lean,Mathlib/RingTheory/GradedAlgebra/Noetherian.lean |
6 |
4 |
['FMLJohn', 'github-actions'] |
nobody |
721-23675 1 year ago |
961-13571 961 days ago |
1-57831 1 day |
| 7875 |
astrainfinita author:astrainfinita |
chore: make `SMulCommClass A A B` and `SMulCommClass A B B` higher priority |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
slow-typeclass-synthesis
t-algebra
label:t-algebra$ |
54/48 |
Mathlib/Algebra/Algebra/Basic.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/DirectSum/Algebra.lean,Mathlib/Algebra/Group/Action/Defs.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Lie/NonUnitalNonAssocAlgebra.lean,Mathlib/Algebra/Module/LinearMap/End.lean,Mathlib/Algebra/MonoidAlgebra/Basic.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/Ring/CentroidHom.lean,Mathlib/Algebra/Ring/Subring/Basic.lean,Mathlib/Algebra/Ring/Subsemiring/Basic.lean,Mathlib/Algebra/Star/NonUnitalSubalgebra.lean,Mathlib/Analysis/Complex/UnitDisc/Basic.lean,Mathlib/Analysis/NormedSpace/lpSpace.lean,Mathlib/Data/Matrix/Basic.lean,Mathlib/GroupTheory/GroupAction/Prod.lean,Mathlib/GroupTheory/GroupAction/Ring.lean,Mathlib/GroupTheory/GroupAction/SubMulAction.lean,Mathlib/GroupTheory/MonoidLocalization.lean,Mathlib/GroupTheory/Submonoid/Center.lean,Mathlib/LinearAlgebra/PiTensorProduct.lean,Mathlib/RingTheory/Ideal/Quotient.lean,Mathlib/RingTheory/TensorProduct/Basic.lean,Mathlib/Topology/ContinuousFunction/ContinuousMapZero.lean,Mathlib/Topology/ContinuousFunction/StoneWeierstrass.lean,Mathlib/Topology/ContinuousFunction/ZeroAtInfty.lean |
27 |
15 |
['Parcly-Taxel', 'astrainfinita', 'jcommelin', 'leanprover-bot'] |
nobody |
721-23674 1 year ago |
775-40182 775 days ago |
1-47913 1 day |
| 6491 |
eric-wieser author:eric-wieser |
chore(Mathlib/Algebra/Hom/GroupAction): add `SMulHomClass.comp_smul` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
24/10 |
Mathlib/Algebra/Hom/GroupAction.lean |
1 |
0 |
[] |
nobody |
721-23673 1 year ago |
993-9673 993 days ago |
83-76369 83 days |
| 10629 |
madvorak author:madvorak |
feat: List.cons_sublist_append_iff_right |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
|
11/0 |
Mathlib/Data/List/Basic.lean |
1 |
1 |
['eric-wieser'] |
nobody |
707-17218 1 year ago |
833-26055 833 days ago |
53-73442 53 days |
| 13791 |
digama0 author:digama0 |
refactor: Primrec and Partrec |
General cleanup of the `Primrec` and `Partrec` files, to better adjust to lean 4 things. The main user-visible change is that `Primrec₂` is no longer a `def` but an `abbrev`, because it was causing inference issues in lean 4. I also removed all the nonterminal `simp`s in `PartrecCode.lean`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
tech debt
|
585/778 |
Mathlib/Computability/Ackermann.lean,Mathlib/Computability/Halting.lean,Mathlib/Computability/Partrec.lean,Mathlib/Computability/PartrecCode.lean,Mathlib/Computability/Primrec.lean |
5 |
2 |
['github-actions', 'grunweg'] |
nobody |
702-66463 1 year ago |
766-56049 766 days ago |
1-84718 1 day |
| 12418 |
rosborn author:rosborn |
style: replace preimage_val with ↓∩ notation |
---
This is a rough draft of what the new `↓∩` notation would look like within mathlib. I believe this is an improvement in clarity and would like to have `↓∩` as a standard notation (along with `''`, `⁻¹'`, `↑`, etc...). As `↓∩` is specialized for `Set`s, I have only changed `preimage_val` when the left-hand side of `↓∩` is a `Set`.
The introduction of the `↓∩` notation to Data.Set.Image is temporary as it isn't possible to import Data.Set.Subset directly. If we want `↓∩` unscoped, where would be the best place to define it? An option is Data.Set.Defs, but the notation cannot be defined without additional imports as the file does not import `notation3`.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
56/61 |
Mathlib/Analysis/InnerProductSpace/Projection.lean,Mathlib/Data/Set/Function.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/Set/Subset.lean,Mathlib/MeasureTheory/Constructions/Polish.lean,Mathlib/MeasureTheory/MeasurableSpace/Basic.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/Order/UpperLower/Basic.lean,Mathlib/Topology/Bases.lean,Mathlib/Topology/Clopen.lean,Mathlib/Topology/Connected/Basic.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/Constructions.lean,Mathlib/Topology/ContinuousOn.lean,Mathlib/Topology/LocalAtTarget.lean,Mathlib/Topology/LocallyConstant/Basic.lean,Mathlib/Topology/Separation.lean,Mathlib/Topology/Sober.lean |
18 |
3 |
['grunweg', 'rosborn'] |
nobody |
702-66221 1 year ago |
788-76205 788 days ago |
29-50022 29 days |
| 12751 |
Command-Master author:Command-Master |
feat: add lemmas for Nat/Bits, Nat/Bitwise and Nat/Size |
Remove `@[simp]` from `Nat.bit_false` and `Nat.bit_true`, as `bit0` and `bit1` are deprecated, and add some lemmas to `Bits`, `Bitwise` and `Size`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
new-contributor
|
66/7 |
Mathlib/Data/Nat/Bits.lean,Mathlib/Data/Nat/Bitwise.lean,Mathlib/Data/Nat/Multiplicity.lean,Mathlib/Data/Nat/Size.lean |
4 |
26 |
['Command-Master', 'Rida-Hamadani', 'Ruben-VandeVelde', 'YaelDillies', 'github-actions', 'jcommelin'] |
nobody |
702-975 1 year ago |
737-7197 737 days ago |
56-40668 56 days |
| 10350 |
Shamrock-Frost author:Shamrock-Frost |
feat(Data/Setoid): add the operations of taking the equivalence class of an element and of saturating a set wrt an equivalence relation |
I'm open to suggestions about changing the name "saturate", someone on zulip rightly pointed out this is a very overloaded term in math. That said, I think it's unlikely to cause confusion and that there's only one reasonable interpretation in the context of setoids.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #10347
- [x] depends on: #10348
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
|
169/3 |
Mathlib/Data/Setoid/Basic.lean,Mathlib/Data/Setoid/Partition.lean,Mathlib/Order/Closure.lean |
3 |
1 |
[] |
nobody |
700-3249 1 year ago |
818-81277 818 days ago |
19-74546 19 days |
| 17127 |
astrainfinita author:astrainfinita |
chore: remove global `Quotient.mk` `⟦·⟧` notation |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Merge this PR when we are ready to migrate to `QuotLike` API (#16421).
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
|
137/2 |
Counterexamples/Pseudoelement.lean,Mathlib/Algebra/Associated/Basic.lean,Mathlib/Algebra/BigOperators/Group/Finset.lean,Mathlib/Algebra/Group/Conj.lean,Mathlib/Algebra/GroupWithZero/NonZeroDivisors.lean,Mathlib/Algebra/Order/CauSeq/Completion.lean,Mathlib/Algebra/Quandle.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Jacobian.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Projective.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/Basic.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/FundamentalGroup.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/InducedMaps.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/Product.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/SimplyConnected.lean,Mathlib/CategoryTheory/Abelian/Pseudoelements.lean,Mathlib/CategoryTheory/Limits/Shapes/SingleObj.lean,Mathlib/CategoryTheory/Monoidal/Free/Basic.lean,Mathlib/CategoryTheory/Monoidal/Free/Coherence.lean,Mathlib/CategoryTheory/Skeletal.lean,Mathlib/Data/Finset/Card.lean,Mathlib/Data/Fintype/List.lean,Mathlib/Data/Fintype/Quotient.lean,Mathlib/Data/Multiset/Basic.lean,Mathlib/Data/QPF/Multivariate/Constructions/Fix.lean,Mathlib/Data/QPF/Univariate/Basic.lean,Mathlib/Data/Quot.lean,Mathlib/Data/Real/Basic.lean,Mathlib/Data/Set/Finite.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/Setoid/Basic.lean,Mathlib/GroupTheory/GroupAction/Basic.lean,Mathlib/GroupTheory/GroupAction/Quotient.lean,Mathlib/LinearAlgebra/Dual.lean,Mathlib/LinearAlgebra/Ray.lean,Mathlib/Logic/Encodable/Basic.lean,Mathlib/Logic/Equiv/Basic.lean,Mathlib/ModelTheory/DirectLimit.lean,Mathlib/ModelTheory/Fraisse.lean,Mathlib/ModelTheory/Quotients.lean,Mathlib/NumberTheory/NumberField/CanonicalEmbedding/FundamentalCone.lean,Mathlib/NumberTheory/NumberField/Embeddings.lean,Mathlib/NumberTheory/NumberField/Units/DirichletTheorem.lean,Mathlib/NumberTheory/Padics/PadicIntegers.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/Order/RelIso/Basic.lean,Mathlib/RepresentationTheory/Action/Concrete.lean,Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Cardinal/Ordinal.lean,Mathlib/SetTheory/Game/Basic.lean,Mathlib/SetTheory/Game/Birthday.lean,Mathlib/SetTheory/Game/Impartial.lean,Mathlib/SetTheory/Game/Ordinal.lean,Mathlib/SetTheory/Game/State.lean,Mathlib/SetTheory/Lists.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Basic.lean,Mathlib/SetTheory/Surreal/Basic.lean,Mathlib/SetTheory/Surreal/Dyadic.lean,Mathlib/SetTheory/Surreal/Multiplication.lean,Mathlib/SetTheory/ZFC/Basic.lean,Mathlib/SetTheory/ZFC/Rank.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/Homotopy/HomotopyGroup.lean,Mathlib/Topology/Homotopy/Path.lean,Mathlib/Topology/Homotopy/Product.lean,Mathlib/Topology/MetricSpace/GromovHausdorff.lean,Mathlib/Topology/UniformSpace/Separation.lean,test/interactiveUnfold.lean |
68 |
1 |
['github-actions'] |
nobody |
660-38314 1 year ago |
660-38314 660 days ago |
4-72805 4 days |
| 13156 |
erdOne author:erdOne |
refactor(Algebra/Module/LocalizedModule): Redefine `LocalizedModule` in terms of `OreLocalization`. |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #13151
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
519/628 |
Mathlib.lean,Mathlib/Algebra/Module/LocalizedModule.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/RingTheory/DedekindDomain/Different.lean,Mathlib/RingTheory/Localization/BaseChange.lean,Mathlib/RingTheory/OreLocalization/Basic.lean,Mathlib/RingTheory/OreLocalization/Module.lean,Mathlib/RingTheory/OreLocalization/Ring.lean |
8 |
4 |
['github-actions', 'leanprover-bot', 'mattrobball'] |
nobody |
646-4196 1 year ago |
646-4196 646 days ago |
51-84473 51 days |
| 14598 |
Command-Master author:Command-Master |
chore: add typeclasses to unify various `add_top`, `add_eq_top`, etc. |
Add the four typeclasses `IsTopAbsorbing`, `IsBotAbsorbing`, `NoTopSum`, `NoBotSum`, as additive equivalents for `MulZeroClass` and `NoZeroDivisors`. Add instances of these for `ENNReal`, `WithTop α`, `WithBot α`, `PUnit`, `EReal`, `PartENat`, `Measure`, `Interval` and `Filter`.
Also split `Algebra/Order/AddGroupWithTop` to `Algebra/Order/Group/WithTop` and `Algebra/Order/Monoid/WithTop`
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks, and is labeled with `awaiting-review`.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Previous usages of lemmas with quantified names like `WithTop.add_top` have to be changed to just `add_top`.
`add_lt_top` is `@[simp]`, in accordance with `ENNReal.add_lt_top` being `@[simp]`. This affects `WithTop.add_lt_top` which previously hadn't been `@[simp]`.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
t-order
new-contributor
label:t-algebra$ |
264/195 |
Archive/Wiedijk100Theorems/BallotProblem.lean,Mathlib.lean,Mathlib/Algebra/Order/Group/WithTop.lean,Mathlib/Algebra/Order/GroupWithZero/Canonical.lean,Mathlib/Algebra/Order/Interval/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Defs.lean,Mathlib/Algebra/Order/Monoid/Unbundled/WithTop.lean,Mathlib/Algebra/Order/Monoid/WithTop.lean,Mathlib/Algebra/PUnitInstances/Order.lean,Mathlib/Algebra/Polynomial/Degree/Definitions.lean,Mathlib/Algebra/Polynomial/Monic.lean,Mathlib/Algebra/Tropical/Basic.lean,Mathlib/Analysis/Analytic/Meromorphic.lean,Mathlib/Analysis/Normed/Lp/ProdLp.lean,Mathlib/Analysis/NormedSpace/ENorm.lean,Mathlib/Analysis/SpecialFunctions/JapaneseBracket.lean,Mathlib/Analysis/SpecialFunctions/Log/ENNRealLog.lean,Mathlib/Data/ENNReal/Operations.lean,Mathlib/Data/ENat/Basic.lean,Mathlib/Data/Nat/PartENat.lean,Mathlib/Data/Nat/WithBot.lean,Mathlib/Data/Real/EReal.lean,Mathlib/LinearAlgebra/Lagrange.lean,Mathlib/MeasureTheory/Covering/Differentiation.lean,Mathlib/MeasureTheory/Decomposition/Lebesgue.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/CondexpL1.lean,Mathlib/MeasureTheory/Function/Jacobian.lean,Mathlib/MeasureTheory/Function/L1Space.lean,Mathlib/MeasureTheory/Function/L2Space.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Function/LpSeminorm/TriangleInequality.lean,Mathlib/MeasureTheory/Function/LpSpace.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/Basic.lean,Mathlib/MeasureTheory/Function/UniformIntegrable.lean,Mathlib/MeasureTheory/Integral/Bochner.lean,Mathlib/MeasureTheory/Integral/MeanInequalities.lean,Mathlib/MeasureTheory/Integral/SetIntegral.lean,Mathlib/MeasureTheory/Integral/VitaliCaratheodory.lean,Mathlib/MeasureTheory/Measure/Hausdorff.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Measure/LevyProkhorovMetric.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/MeasureSpaceDef.lean,Mathlib/MeasureTheory/Measure/Regular.lean,Mathlib/MeasureTheory/Measure/Typeclasses.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/Order/Filter/Pointwise.lean,Mathlib/Probability/Kernel/Defs.lean,Mathlib/Probability/Martingale/Convergence.lean,Mathlib/RingTheory/Multiplicity.lean,Mathlib/RingTheory/MvPowerSeries/NoZeroDivisors.lean,Mathlib/RingTheory/UniqueFactorizationDomain.lean,Mathlib/Topology/EMetricSpace/Defs.lean,Mathlib/Topology/MetricSpace/Bounded.lean,Mathlib/Topology/MetricSpace/HausdorffDistance.lean,Mathlib/Topology/MetricSpace/Lipschitz.lean |
57 |
30 |
['Command-Master', 'YaelDillies', 'github-actions'] |
nobody |
623-33780 1 year ago |
623-33780 623 days ago |
7-45599 7 days |
| 19212 |
Julian author:Julian |
feat(LinearAlgebra): add a variable_alias for VectorSpace |
Taken directly from the variable_alias docs.
Zulip: https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/why.20.5Bvariable_alias.5D.20attribute.20is.20not.20used.20in.20Mathlib.3F
---
This is the first actual variable alias added to mathlib. I haven't reviewed variable_alias fully, but it seems like there's at least 3 ways they could be distributed in Mathlib:
* alongside whatever subfolder they "belong to" (which is what I've tentatively done here)
* In a file called `Aliases` somewhere near the thing they alias (which seems less discoverable to me)
* In a single file, a la `Mathlib.TrainingWheels` (with some less playful name) which is meant to define a bunch of more "friendly" aliases all in one place.
I kind of like the idea of the third thing as a future module but perhaps it can be synthesized if/when there are more aliases? For now as I say I've done the first one, but please let me know if someone prefers something else.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
25/0 |
Mathlib.lean,Mathlib/LinearAlgebra/VectorSpace.lean,scripts/noshake.json |
3 |
10 |
['Julian', 'PieterCuijpers', 'github-actions', 'urkud'] |
nobody |
603-10535 1 year ago |
603-10535 603 days ago |
7-68101 7 days |
| 19337 |
zeramorphic author:zeramorphic |
feat(Data/Finsupp): generalise `Finsupp` to any "zero" value |
Remove the explicit dependence of `Finsupp` on `[Zero M]`, instead defining `Finsupp'` (better name pending) to be functions that are equal to a fixed value `z : M` cofinitely often.
This PR is intended to do the initial work of replacing the definition of `Finsupp` with an instantiation of the more general definition, without adding any appropriate API. If accepted, the API development will follow in later PRs.
Issues to consider:
- Naming of `Finsupp'.`
- Where should `Finsupp'` lemmas go? Do they need their own file/folder under `Data/`?
Relevant Zulip threads:
- https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Finsupp.20generalisations
- https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Finsupp-like.20partial.20function
Comments are welcome.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
|
203/83 |
Archive/Wiedijk100Theorems/Partition.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/MvPolynomial/Rename.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/Algebra/Polynomial/Laurent.lean,Mathlib/Data/Finsupp/BigOperators.lean,Mathlib/Data/Finsupp/Defs.lean,Mathlib/Data/Finsupp/Order.lean,Mathlib/Data/Nat/Choose/Multinomial.lean,Mathlib/RingTheory/MvPolynomial/Symmetric/Defs.lean,Mathlib/RingTheory/PowerBasis.lean,scripts/nolints_prime_decls.txt |
13 |
5 |
['github-actions', 'vihdzp', 'zeramorphic'] |
nobody |
600-73012 1 year ago |
600-73012 600 days ago |
4-60621 4 days |
| 18756 |
astrainfinita author:astrainfinita |
refactor: deprecate `DistribMulActionSemiHomClass` `MulSemiringActionSemiHomClass` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
50/28 |
Mathlib/Algebra/Algebra/NonUnitalHom.lean,Mathlib/Algebra/Module/LinearMap/Defs.lean,Mathlib/GroupTheory/GroupAction/Hom.lean |
3 |
4 |
['astrainfinita', 'github-actions', 'leanprover-bot'] |
nobody |
589-38681 1 year ago |
589-38681 589 days ago |
31-53021 31 days |
| 16120 |
awainverse author:awainverse |
feat(ModelTheory/Algebra/Ring/Basic): Ring homomorphisms are a `StrongHomClass` for the language of rings |
Adds an `IsAlgebraic` instance to the language of rings
Adds a `StrongHomClass` instance to the type of ring homomorphisms between rings with `CompatibleRing` structures
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
RFC
t-logic
label:t-algebra$ |
34/13 |
Mathlib/ModelTheory/Algebra/Ring/Basic.lean |
1 |
10 |
['ChrisHughes24', 'YaelDillies', 'awainverse', 'github-actions', 'jcommelin'] |
nobody |
561-54855 1 year ago |
561-54855 561 days ago |
135-29017 135 days |
| 20527 |
trivial1711 author:trivial1711 |
refactor(Topology/UniformSpace/Completion): more descriptive names for `α → Completion α` |
- We rename the various maps `α → Completion α` in order to make their names more consistent.
- Let `α` be a uniform space. We rename the uniformly continuous function `α → Completion α` from `UniformSpace.Completion.coe'` to `UniformSpace.Completion.coe`.
- Let `α` be a uniform additive group. We rename the additive group homomorphism `α →+ Completion α` from `UniformSpace.Completion.toCompl` to `UniformSpace.Completion.coeAddHom`.
- Let `α` be a uniform ring. The ring homomorphism `α →+* Completion α` is called `UniformSpace.Completion.coeRingHom`; its name is unchanged.
- Let `α` be a normed space over a field `𝕜`. We rename the linear isometry `α →ₗᵢ[𝕜] Completion α` from `UniformSpace.Completion.toComplₗᵢ` to `UniformSpace.Completion.coeₗᵢ`.
- Let `α` be a normed space over a field `𝕜`. We rename the continuous linear map `α →L[𝕜] Completion α` from `UniformSpace.Completion.toComplL` to `UniformSpace.Completion.coeL`.
- Let `α` be a normed additive group. We rename the norm preserving homomorphism `NormedAddGroupHom α (Completion α)` from `NormedAddCommGroup.toCompl` to `UniformSpace.Completion.coeNormedAddGroupHom`.
- We analogously rename some other theorems.
- We add some trivial theorems (all of which are proved by `rfl`) that state that the functions considered above are equal. We give all of them the `simp` and `norm_cast` attributes.
- We add a new theorem `UniformSpace.Completion.coeAddHom_eq_coe` that states that `UniformSpace.Completion.coeAddHom` and `UniformSpace.Completion.coe` are equal as functions.
- We similarly add a new theorem `UniformSpace.Completion.coeRingHom_eq_coe`.
- We rename the theorem `UniformSpace.Completion.coe_toComplₗᵢ` to `UniformSpace.Completion.coeₗᵢ_eq_coe`.
- We rename the theorem `UniformSpace.Completion.coe_toComplL` to `UniformSpace.Completion.coeL_eq_coe`.
- We similarly add a new theorem `UniformSpace.Completion.coeNormedAddGroupHom_eq_coe`.
- We change all occurrences of the string `((↑) : α → Completion α)` to `(coe : α → Completion α)` or just `coe`.
- We put the statements of some theorems into simp normal form by using the plain function `coe` rather than the homomorphisms that carry more structure.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
|
130/92 |
Mathlib/Analysis/Analytic/Uniqueness.lean,Mathlib/Analysis/Calculus/FDeriv/Analytic.lean,Mathlib/Analysis/Complex/AbsMax.lean,Mathlib/Analysis/Complex/Liouville.lean,Mathlib/Analysis/InnerProductSpace/Completion.lean,Mathlib/Analysis/Normed/Group/HomCompletion.lean,Mathlib/Analysis/Normed/Module/Completion.lean,Mathlib/Analysis/SpecialFunctions/NonIntegrable.lean,Mathlib/MeasureTheory/Integral/IntegralEqImproper.lean,Mathlib/Topology/Algebra/GroupCompletion.lean,Mathlib/Topology/Algebra/InfiniteSum/GroupCompletion.lean,Mathlib/Topology/Algebra/InfiniteSum/Nonarchimedean.lean,Mathlib/Topology/Algebra/Nonarchimedean/Completion.lean,Mathlib/Topology/Algebra/UniformRing.lean,Mathlib/Topology/Category/UniformSpace.lean,Mathlib/Topology/MetricSpace/Completion.lean,Mathlib/Topology/UniformSpace/Completion.lean |
17 |
4 |
['eric-wieser', 'github-actions', 'trivial1711'] |
nobody |
554-85887 1 year ago |
554-85887 554 days ago |
6-66637 6 days |
| 18474 |
astrainfinita author:astrainfinita |
perf: lower the priority of `*WithOne.to*` instances |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
From #7873.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
slow-typeclass-synthesis
t-algebra
t-data
label:t-algebra$ |
9/2 |
Mathlib/Algebra/Polynomial/BigOperators.lean,Mathlib/Data/Int/Cast/Defs.lean,Mathlib/Data/Nat/Cast/Defs.lean |
3 |
7 |
['astrainfinita', 'eric-wieser', 'github-actions', 'leanprover-bot'] |
nobody |
552-72917 1 year ago |
552-72917 552 days ago |
76-66916 76 days |
| 20372 |
jvlmdr author:jvlmdr |
feat(MeasureTheory/Function): Add ContinuousLinearMap.bilinearCompLp(L) |
Introduce ContinuousLinearMap.bilinearCompLp and bilinearCompLpL.
Generalize eLpNorm_le_eLpNorm_mul_eLpNorm theorems to include constant C in bound condition.
---
Expect this may be useful for defining tempered distributions from functions in `L^p`.
The definitions more or less follow `ContinuousLinearMap.compLp...`. Names are loosely analogous to `ContinuousLinearMap.bilinearComp` and `SchwartzMap.bilinLeftCLM`.
Note: I preferred the spelling `hpqr : p⁻¹ + q⁻¹ = r⁻¹` with `f` in `L^p` and `g` in `L^q` to `hpqr : 1 / p = 1 / q + 1 / r`. It's easier to obtain from `ENNReal.IsConjExponent` too.
A few questions:
- [ ] I defined `bilinear{Left,Right}LpL` in addition to `bilinearCompLpL` because `LinearMap.mkContinuous₂` is marked as `noncomputable` and `LinearMap.mkContinuous` is not. Is this worth the extra definitions? (Note: This is not visible in the source due to `noncomputable section`.)
- [ ] Should I use `C : ℝ` instead of `C : NNReal` for `eLpNorm_le_eLpNorm_mul_eLpNorm'_of_norm'`?
- [ ] Is it going to be painful to have `[Fact (1 ≤ p)] [Fact (1 ≤ q)] [Fact (1 ≤ r)]`? I don't think there's a way to avoid it though. Maybe providing specialized versions for `p.IsConjExponent q` with `L^1`?
Naming:
- [ ] Is it satisfactory to add a `'` to the `eLpNorm_le_eLpNorm_mul_eLpNorm ` definitions in `CompareExp.lean` where `≤ ‖f x‖ * ‖g x‖` has been replaced with `≤ C * ‖f x‖ * ‖g x‖`? These could replace the existing theorems, although I don't want to break backwards compatibility. There are 5 instances: `eLpNorm_le_eLpNorm_top_mul_eLpNorm'`, `eLpNorm_le_eLpNorm_mul_eLpNorm_top'`, `eLpNorm'_le_eLpNorm'_mul_eLpNorm''`, `eLpNorm_le_eLpNorm_mul_eLpNorm_of_nnnorm'`, `eLpNorm_le_eLpNorm_mul_eLpNorm'_of_norm'` (I'm not sure why the existing theorem `eLpNorm_le_eLpNorm_mul_eLpNorm'_of_norm` has an internal `'`)
- [ ] Is `bilinearLeftLpL` a suitable name? Other options: `bilinearCompLpLeftL`, `bilinearCompLeftLpL`, `bilinLeftLpL` (analogous to `SchwartzMap.bilinLeftCLM`)
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-measure-probability
new-contributor
|
203/40 |
Mathlib/MeasureTheory/Function/LpSeminorm/CompareExp.lean,Mathlib/MeasureTheory/Function/LpSpace.lean |
2 |
1 |
['github-actions'] |
nobody |
540-10774 1 year ago |
540-10774 540 days ago |
27-43617 27 days |
| 21959 |
BGuillemet author:BGuillemet |
feat(Topology/ContinuousMap): Stone-Weierstrass theorem for MvPolynomial |
Add the subalgebra of multivariate polynomials and prove it separates points, on the same model as `ContinuousMap/Polynomial.lean`.
Prove the Stone-Weierstrass theorem and some variations for multivariate polynomials.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
new-contributor
|
285/1 |
Mathlib.lean,Mathlib/Topology/ContinuousMap/MvPolynomial.lean,Mathlib/Topology/ContinuousMap/StoneWeierstrass.lean |
3 |
1 |
['github-actions'] |
nobody |
503-83195 1 year ago |
503-83195 503 days ago |
16-76141 16 days |
| 18470 |
astrainfinita author:astrainfinita |
perf: lower the priority of `Normed*.to*` instances |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
From #7873.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
slow-typeclass-synthesis
t-algebra
t-analysis
label:t-algebra$ |
28/0 |
Mathlib/Analysis/Normed/Field/Basic.lean,Mathlib/Analysis/Normed/Group/Basic.lean |
2 |
9 |
['astrainfinita', 'github-actions', 'jcommelin', 'leanprover-bot'] |
nobody |
499-54622 1 year ago |
499-54622 499 days ago |
129-16341 129 days |
| 8767 |
eric-wieser author:eric-wieser |
refactor(Cache): tidy lake-manifest parsing in Cache |
This now respects local copies of Mathlib dependencies (though in practice these invalidate the *online* cache because to point to local copies of Mathlib, the hash for `lakefile.lean` and `lake-manifest.json` is first invalidated).
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [x] depends on: #11492
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
|
49/49 |
Cache/Hashing.lean,Cache/IO.lean,lake-manifest.json |
3 |
8 |
['digama0', 'eric-wieser', 'github-actions'] |
nobody |
496-54354 1 year ago |
678-20304 678 days ago |
119-35643 119 days |
| 22660 |
Ruben-VandeVelde author:Ruben-VandeVelde |
chore: follow naming convention around Group.IsNilpotent |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
133/67 |
Mathlib/GroupTheory/Frattini.lean,Mathlib/GroupTheory/Nilpotent.lean,Mathlib/GroupTheory/SpecificGroups/ZGroup.lean |
3 |
1 |
['github-actions'] |
nobody |
492-19050 1 year ago |
492-19050 492 days ago |
10-48025 10 days |
| 21488 |
imbrem author:imbrem |
feat(CategoryTheory/Monoidal): premonoidal categories |
Add support for premonoidal categories
---
Still want to add support for:
- Premonoidal braided/symmetric categories
- The monoidal coherence theorem, which I've already ported in my `discretion` library
- The `coherence` tactic, which should work fine for premonoidal categories too
but wanted to get this in front of reviewers ASAP to make sure my general approach was alright
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-category-theory
new-contributor
|
900/361 |
Mathlib/Algebra/Category/ModuleCat/Presheaf/Monoidal.lean,Mathlib/CategoryTheory/Bicategory/End.lean,Mathlib/CategoryTheory/GradedObject/Monoidal.lean,Mathlib/CategoryTheory/Localization/Monoidal.lean,Mathlib/CategoryTheory/Monoidal/Braided/Basic.lean,Mathlib/CategoryTheory/Monoidal/Category.lean,Mathlib/CategoryTheory/Monoidal/Center.lean,Mathlib/CategoryTheory/Monoidal/CoherenceLemmas.lean,Mathlib/CategoryTheory/Monoidal/Discrete.lean,Mathlib/CategoryTheory/Monoidal/End.lean,Mathlib/CategoryTheory/Monoidal/Free/Basic.lean,Mathlib/CategoryTheory/Monoidal/Functor.lean,Mathlib/CategoryTheory/Monoidal/FunctorCategory.lean,Mathlib/CategoryTheory/Monoidal/Mon_.lean,Mathlib/CategoryTheory/Monoidal/Opposite.lean,Mathlib/CategoryTheory/Monoidal/Transport.lean,Mathlib/Tactic/CategoryTheory/Monoidal/Datatypes.lean,Mathlib/Tactic/CategoryTheory/Monoidal/Normalize.lean,Mathlib/Tactic/CategoryTheory/Monoidal/PureCoherence.lean,Mathlib/Tactic/CategoryTheory/MonoidalComp.lean,MathlibTest/StringDiagram.lean |
21 |
9 |
['YaelDillies', 'github-actions', 'grunweg', 'imbrem', 'kim-em', 'leanprover-community-bot-assistant'] |
nobody |
469-5197 1 year ago |
469-5198 469 days ago |
58-6028 58 days |
| 21525 |
sinhp author:sinhp |
feat(CategoryTheory): Locally Cartesian Closed Categories (Prelim) |
This PR defines the basic preliminaries for defining locally cartesian closed categories (LCCCs). In particular, using the calculus of mates we define certain natural isomorphisms involving `Over.star` and `Over.pullback` which will be crucial in defining the right adjoint to the pullback functor in the development of LCCCs.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-category-theory
large-import
|
338/24 |
Mathlib/CategoryTheory/Comma/Over/Basic.lean,Mathlib/CategoryTheory/Comma/Over/Pullback.lean,Mathlib/CategoryTheory/Galois/Examples.lean |
3 |
13 |
['b-mehta', 'github-actions', 'joelriou', 'leanprover-community-bot-assistant', 'sinhp'] |
nobody |
469-5195 1 year ago |
469-5197 469 days ago |
36-69400 36 days |
| 16314 |
astrainfinita author:astrainfinita |
chore(Data/Quot): deprecate `ind*'` APIs |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #16264
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
|
247/287 |
Counterexamples/CliffordAlgebraNotInjective.lean,Mathlib/Algebra/Colimit/Module.lean,Mathlib/Algebra/Lie/Quotient.lean,Mathlib/Algebra/Module/Torsion.lean,Mathlib/Algebra/RingQuot.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Angle.lean,Mathlib/CategoryTheory/ConnectedComponents.lean,Mathlib/CategoryTheory/Subobject/Basic.lean,Mathlib/CategoryTheory/Subobject/FactorThru.lean,Mathlib/CategoryTheory/Subobject/Lattice.lean,Mathlib/Computability/Reduce.lean,Mathlib/Computability/Tape.lean,Mathlib/Data/List/Cycle.lean,Mathlib/Data/Multiset/MapFold.lean,Mathlib/Data/Multiset/ZeroCons.lean,Mathlib/Data/Quot.lean,Mathlib/Data/Setoid/Basic.lean,Mathlib/Data/Setoid/Partition.lean,Mathlib/FieldTheory/Fixed.lean,Mathlib/GroupTheory/Complement.lean,Mathlib/GroupTheory/Congruence/Basic.lean,Mathlib/GroupTheory/Congruence/Defs.lean,Mathlib/GroupTheory/Congruence/Hom.lean,Mathlib/GroupTheory/Coset/Basic.lean,Mathlib/GroupTheory/Coset/Defs.lean,Mathlib/GroupTheory/FreeAbelianGroup.lean,Mathlib/GroupTheory/GroupAction/Basic.lean,Mathlib/GroupTheory/GroupAction/Defs.lean,Mathlib/GroupTheory/GroupAction/Quotient.lean,Mathlib/GroupTheory/Index.lean,Mathlib/GroupTheory/MonoidLocalization/Basic.lean,Mathlib/GroupTheory/PGroup.lean,Mathlib/GroupTheory/Perm/Cycle/Concrete.lean,Mathlib/GroupTheory/PresentedGroup.lean,Mathlib/GroupTheory/QuotientGroup/Basic.lean,Mathlib/GroupTheory/QuotientGroup/Defs.lean,Mathlib/GroupTheory/SchurZassenhaus.lean,Mathlib/GroupTheory/Sylow.lean,Mathlib/LinearAlgebra/Alternating/DomCoprod.lean,Mathlib/LinearAlgebra/Projectivization/Basic.lean,Mathlib/LinearAlgebra/Quotient/Basic.lean,Mathlib/LinearAlgebra/Quotient/Defs.lean,Mathlib/MeasureTheory/Function/AEEqFun.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/NumberTheory/RamificationInertia/Basic.lean,Mathlib/Order/Antisymmetrization.lean,Mathlib/Order/Category/PartOrd.lean,Mathlib/Order/Filter/Germ/Basic.lean,Mathlib/RepresentationTheory/GroupCohomology/Hilbert90.lean,Mathlib/RingTheory/AdicCompletion/Algebra.lean,Mathlib/RingTheory/AdicCompletion/Basic.lean,Mathlib/RingTheory/AdicCompletion/Functoriality.lean,Mathlib/RingTheory/AdjoinRoot.lean,Mathlib/RingTheory/Congruence/Basic.lean,Mathlib/RingTheory/Flat/FaithfullyFlat/Basic.lean,Mathlib/RingTheory/GradedAlgebra/HomogeneousLocalization.lean,Mathlib/RingTheory/Ideal/Cotangent.lean,Mathlib/RingTheory/Ideal/Norm/AbsNorm.lean,Mathlib/RingTheory/Ideal/Quotient/Basic.lean,Mathlib/RingTheory/Ideal/Quotient/Defs.lean,Mathlib/RingTheory/Ideal/Quotient/Operations.lean,Mathlib/RingTheory/Valuation/Quotient.lean,Mathlib/Topology/Algebra/Group/TopologicalAbelianization.lean,Mathlib/Topology/Algebra/InfiniteSum/Module.lean,Mathlib/Topology/Separation/Basic.lean |
65 |
4 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot'] |
nobody |
463-30161 1 year ago |
463-30163 463 days ago |
55-52030 55 days |
| 15483 |
astrainfinita author:astrainfinita |
chore(GroupTheory/Coset): reduce defeq abuse |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #15482
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
114/60 |
Mathlib/GroupTheory/Commensurable.lean,Mathlib/GroupTheory/Coset.lean,Mathlib/GroupTheory/QuotientGroup.lean,Mathlib/LinearAlgebra/Alternating/DomCoprod.lean,Mathlib/MeasureTheory/Measure/Haar/Quotient.lean,Mathlib/Topology/Algebra/Group/Compact.lean |
6 |
14 |
['astrainfinita', 'eric-wieser', 'github-actions', 'grunweg', 'leanprover-bot', 'mattrobball', 'mergify', 'urkud'] |
nobody |
462-61454 1 year ago |
711-13384 711 days ago |
4-79214 4 days |
| 16594 |
astrainfinita author:astrainfinita |
perf: reorder `extends` and remove some instances in algebra hierarchy |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
slow-typeclass-synthesis
t-algebra
label:t-algebra$ |
240/92 |
Mathlib.lean,Mathlib/Algebra/Algebra/Hom.lean,Mathlib/Algebra/Associated/Basic.lean,Mathlib/Algebra/BigOperators/Ring/List.lean,Mathlib/Algebra/Field/Defs.lean,Mathlib/Algebra/GCDMonoid/Basic.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Group/Ext.lean,Mathlib/Algebra/Group/Opposite.lean,Mathlib/Algebra/Group/Prod.lean,Mathlib/Algebra/GroupWithZero/Defs.lean,Mathlib/Algebra/GroupWithZero/Prod.lean,Mathlib/Algebra/Homology/Embedding/Basic.lean,Mathlib/Algebra/Order/AddGroupWithTop.lean,Mathlib/Algebra/Order/Field/Canonical/Defs.lean,Mathlib/Algebra/Order/Field/Defs.lean,Mathlib/Algebra/Order/Group/Unbundled/Abs.lean,Mathlib/Algebra/Order/GroupWithZero/Canonical.lean,Mathlib/Algebra/Order/Ring/Canonical.lean,Mathlib/Algebra/Order/Ring/Defs.lean,Mathlib/Algebra/Polynomial/Roots.lean,Mathlib/Algebra/Quaternion.lean,Mathlib/Algebra/Ring/Defs.lean,Mathlib/Algebra/Ring/Ext.lean,Mathlib/Algebra/Ring/InjSurj.lean,Mathlib/Algebra/Ring/Rat.lean,Mathlib/Algebra/Ring/SumsOfSquares.lean,Mathlib/Algebra/Tropical/Basic.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Order.lean,Mathlib/Analysis/InnerProductSpace/Symmetric.lean,Mathlib/CategoryTheory/Preadditive/FunctorCategory.lean,Mathlib/Data/Finset/NoncommProd.lean,Mathlib/Data/Int/Cast/Defs.lean,Mathlib/FieldTheory/IsAlgClosed/AlgebraicClosure.lean,Mathlib/FieldTheory/SplittingField/Construction.lean,Mathlib/GroupTheory/Congruence/Basic.lean,Mathlib/GroupTheory/MonoidLocalization/MonoidWithZero.lean,Mathlib/GroupTheory/Torsion.lean,Mathlib/LinearAlgebra/LinearPMap.lean,Mathlib/LinearAlgebra/TensorProduct/Basic.lean,Mathlib/Order/Filter/Germ/Basic.lean,Mathlib/Order/Interval/Finset/Box.lean,Mathlib/RingTheory/Bialgebra/Hom.lean,Mathlib/RingTheory/Coalgebra/Hom.lean,Mathlib/RingTheory/Ideal/Quotient.lean,Mathlib/RingTheory/Perfection.lean,Mathlib/RingTheory/TensorProduct/Basic.lean,Mathlib/RingTheory/TensorProduct/MvPolynomial.lean,Mathlib/Util/NoInstances.lean,scripts/noshake.json |
50 |
8 |
['astrainfinita', 'github-actions', 'grunweg', 'leanprover-bot'] |
nobody |
462-61230 1 year ago |
667-14377 667 days ago |
14-58900 14 days |
| 23859 |
urkud author:urkud |
feat(Topology/../Order/Field): generalize to `Semifield` |
.. from a linear ordered field to a linear ordered semifield---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [ ] depends on: #23857
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
|
245/219 |
Mathlib/Algebra/Order/Group/Pointwise/Interval.lean,Mathlib/Analysis/BoxIntegral/Box/SubboxInduction.lean,Mathlib/Topology/Algebra/Order/Field.lean,Mathlib/Topology/Order/Basic.lean |
4 |
3 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot'] |
nobody |
456-18071 1 year ago |
469-28712 469 days ago |
0-265 4 minutes |
| 23810 |
b-reinke author:b-reinke |
chore(Order/Interval): generalize succ/pred lemmas to partial orders |
Many lemmas in `Mathlib/Order/Interval/Set/SuccPred.lean`and `Mathlib/Order/Interval/Finset/SuccPred.lean` also work for partial orders. They are generalized in this PR by introducing different sections for `PartialOrder` and `LinearOrder` assumptions in the respective files.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-order
|
231/89 |
Mathlib/Order/Interval/Finset/SuccPred.lean,Mathlib/Order/Interval/Set/SuccPred.lean |
2 |
2 |
['github-actions', 'leanprover-community-bot-assistant'] |
nobody |
453-81246 1 year ago |
453-81248 453 days ago |
16-29623 16 days |
| 24285 |
madvorak author:madvorak |
chore(Algebra/*-{Category,Homology}): remove unnecessary universe variables |
Discussions:
https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Call.20for.20help.3A.20technical.2F.20organisational.20debt/with/513620128
https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Algebra.20and.20.60Type*.60/with/513558902
https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Task.2026.3A.20Replace.20Type.20u.20by.20Type*.20wherever.20possible/with/513592993
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
542/916 |
Mathlib/Algebra/AddTorsor/Basic.lean,Mathlib/Algebra/Algebra/Defs.lean,Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/Algebra/Algebra/Field.lean,Mathlib/Algebra/Algebra/Hom.lean,Mathlib/Algebra/Algebra/Operations.lean,Mathlib/Algebra/Algebra/Spectrum/Basic.lean,Mathlib/Algebra/Algebra/Subalgebra/Lattice.lean,Mathlib/Algebra/Algebra/Subalgebra/Tower.lean,Mathlib/Algebra/Algebra/Tower.lean,Mathlib/Algebra/Central/Basic.lean,Mathlib/Algebra/Central/Defs.lean,Mathlib/Algebra/Central/TensorProduct.lean,Mathlib/Algebra/CharP/Pi.lean,Mathlib/Algebra/CharP/Quotient.lean,Mathlib/Algebra/CharP/Subring.lean,Mathlib/Algebra/DirectSum/Algebra.lean,Mathlib/Algebra/DirectSum/Basic.lean,Mathlib/Algebra/DirectSum/Finsupp.lean,Mathlib/Algebra/DirectSum/Module.lean,Mathlib/Algebra/EuclideanDomain/Basic.lean,Mathlib/Algebra/EuclideanDomain/Defs.lean,Mathlib/Algebra/Field/Basic.lean,Mathlib/Algebra/Field/Defs.lean,Mathlib/Algebra/Field/IsField.lean,Mathlib/Algebra/Field/MinimalAxioms.lean,Mathlib/Algebra/Field/Subfield/Basic.lean,Mathlib/Algebra/Field/Subfield/Defs.lean,Mathlib/Algebra/FreeNonUnitalNonAssocAlgebra.lean,Mathlib/Algebra/Group/Conj.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Group/Equiv/Finite.lean,Mathlib/Algebra/Group/Ext.lean,Mathlib/Algebra/Group/Hom/End.lean,Mathlib/Algebra/Group/Hom/Instances.lean,Mathlib/Algebra/Group/Invertible/Basic.lean,Mathlib/Algebra/Group/Invertible/Defs.lean,Mathlib/Algebra/Group/Pi/Basic.lean,Mathlib/Algebra/Group/Pi/Lemmas.lean,Mathlib/Algebra/Group/TypeTags/Basic.lean,Mathlib/Algebra/Group/TypeTags/Finite.lean,Mathlib/Algebra/Group/TypeTags/Hom.lean,Mathlib/Algebra/Group/Units/Basic.lean,Mathlib/Algebra/Group/Units/Defs.lean,Mathlib/Algebra/Group/Units/Hom.lean,Mathlib/Algebra/Group/WithOne/Basic.lean,Mathlib/Algebra/Group/WithOne/Defs.lean,Mathlib/Algebra/GroupWithZero/Action/Pi.lean,Mathlib/Algebra/GroupWithZero/Defs.lean,Mathlib/Algebra/GroupWithZero/Invertible.lean,Mathlib/Algebra/GroupWithZero/NeZero.lean,Mathlib/Algebra/Lie/Abelian.lean,Mathlib/Algebra/Lie/Basic.lean,Mathlib/Algebra/Lie/CartanMatrix.lean,Mathlib/Algebra/Lie/CartanSubalgebra.lean,Mathlib/Algebra/Lie/Character.lean,Mathlib/Algebra/Lie/Classical.lean,Mathlib/Algebra/Lie/DirectSum.lean,Mathlib/Algebra/Lie/Free.lean,Mathlib/Algebra/Lie/Ideal.lean,Mathlib/Algebra/Lie/IdealOperations.lean,Mathlib/Algebra/Lie/Matrix.lean,Mathlib/Algebra/Lie/Nilpotent.lean,Mathlib/Algebra/Lie/NonUnitalNonAssocAlgebra.lean,Mathlib/Algebra/Lie/OfAssociative.lean,Mathlib/Algebra/Lie/Quotient.lean,Mathlib/Algebra/Lie/SkewAdjoint.lean,Mathlib/Algebra/Lie/Solvable.lean,Mathlib/Algebra/Lie/Subalgebra.lean,Mathlib/Algebra/Lie/Submodule.lean,Mathlib/Algebra/Lie/TensorProduct.lean,Mathlib/Algebra/Lie/UniversalEnveloping.lean,Mathlib/Algebra/Module/Basic.lean,Mathlib/Algebra/Module/CharacterModule.lean,Mathlib/Algebra/Module/DedekindDomain.lean,Mathlib/Algebra/Module/Defs.lean,Mathlib/Algebra/Module/End.lean,Mathlib/Algebra/Module/Equiv/Opposite.lean,Mathlib/Algebra/Module/Lattice.lean,Mathlib/Algebra/Module/LinearMap/Basic.lean,Mathlib/Algebra/Module/LinearMap/Defs.lean,Mathlib/Algebra/Module/LinearMap/End.lean,Mathlib/Algebra/Module/LocalizedModule/Basic.lean,Mathlib/Algebra/Module/MinimalAxioms.lean,Mathlib/Algebra/Module/NatInt.lean,Mathlib/Algebra/Module/Opposite.lean,Mathlib/Algebra/Module/Pi.lean,Mathlib/Algebra/Module/Presentation/Differentials.lean,Mathlib/Algebra/Module/Presentation/Tensor.lean,Mathlib/Algebra/Module/Rat.lean,Mathlib/Algebra/Module/RingHom.lean,Mathlib/Algebra/Module/Submodule/Basic.lean,Mathlib/Algebra/Module/Torsion.lean,Mathlib/Algebra/MonoidAlgebra/Basic.lean,Mathlib/Algebra/MonoidAlgebra/Defs.lean,Mathlib/Algebra/MonoidAlgebra/Support.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean |
182 |
22 |
['erdOne', 'github-actions', 'leanprover-bot', 'leanprover-community-bot-assistant', 'madvorak', 'mattrobball'] |
nobody |
453-69943 1 year ago |
453-69944 453 days ago |
2-11846 2 days |
| 23349 |
BGuillemet author:BGuillemet |
feat: add LocallyLipschitzOn.lipschitzOnWith_of_isCompact and two small lemmas about Lipschitz functions |
Main feat (in Mathlib/Topology/EMetricSpace/Basic.lean): if a function `f` from an extended pseudometric space to a pseudometric space is locally Lipschitz on a compact subset `s`, then `f` is Lipschitz on `s`. The theorem is true only when the codomain of `f` is a pseudometric space, so it needs imports from Mathlib/Topology/MetricSpace.
Other small feat (in Mathlib/Analysis/Calculus/ContDiff/RCLike.lean): a function that is continuously differentiable on an open subset is locally Lipschitz on this subset.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #22890
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
large-import
new-contributor
|
59/4 |
Mathlib/Analysis/Calculus/ContDiff/RCLike.lean,Mathlib/Topology/EMetricSpace/Lipschitz.lean |
2 |
4 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot'] |
PatrickMassot assignee:PatrickMassot |
420-76693 1 year ago |
420-76695 420 days ago |
35-30364 35 days |
| 16020 |
adomani author:adomani |
feat: compare PR `olean`s size with `master` |
Adds two CI steps:
* `print the sizes of the oleans` that prints the sizes of all the folders containing `Mathlib` `.olean`s;
* `compare oleans` that compares the sizes of the previous step with the corresponding sizes on `master`.
In the test runs, the two steps have taken at most 3 seconds combined (the first is virtually instantaneous, the second one depends on `curl` to find a job id and on `gh` to retrieve the logs of a previous CI run -- everything else appears to be negligible).
This hopefully helps finding out if some PR is bloating up the `.olean`s.
See [this Zulip discussion](https://leanprover.zulipchat.com/#narrow/stream/287929-mathlib4/topic/Error.3A.20No.20space.20left.20on.20device/near/463792355) for a PR of mine that prompted this check.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
CI
|
120/0 |
.github/build.in.yml,.github/workflows/bors.yml,.github/workflows/build.yml,.github/workflows/build_fork.yml,scripts/olean_comparison.sh |
5 |
50 |
['Vtec234', 'YaelDillies', 'adomani', 'bryangingechen', 'github-actions', 'grunweg', 'kim-em', 'leanprover-community-bot-assistant', 'mattrobball'] |
nobody |
411-40300 1 year ago |
411-40302 411 days ago |
285-26861 285 days |
| 25340 |
dupuisf author:dupuisf |
chore(Analysis/Convex): move files pertaining to convex/concave functions to their own folder |
This PR creates a new folder under `Analysis/Convex` called `Analysis/Convex/Function`, which includes files that are mostly or entirely about convex/concave functions (as opposed to convex sets).
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-convex-geometry
|
4264/4155 |
Mathlib.lean,Mathlib/Analysis/Convex/Continuous.lean,Mathlib/Analysis/Convex/Deriv.lean,Mathlib/Analysis/Convex/Exposed.lean,Mathlib/Analysis/Convex/Extrema.lean,Mathlib/Analysis/Convex/Function.lean,Mathlib/Analysis/Convex/Function/Basic.lean,Mathlib/Analysis/Convex/Function/Continuous.lean,Mathlib/Analysis/Convex/Function/Deriv.lean,Mathlib/Analysis/Convex/Function/Extrema.lean,Mathlib/Analysis/Convex/Function/Integral.lean,Mathlib/Analysis/Convex/Function/Jensen.lean,Mathlib/Analysis/Convex/Function/Mul.lean,Mathlib/Analysis/Convex/Function/Piecewise.lean,Mathlib/Analysis/Convex/Function/Quasiconvex.lean,Mathlib/Analysis/Convex/Function/Slope.lean,Mathlib/Analysis/Convex/Function/Strong.lean,Mathlib/Analysis/Convex/Integral.lean,Mathlib/Analysis/Convex/Jensen.lean,Mathlib/Analysis/Convex/Mul.lean,Mathlib/Analysis/Convex/Piecewise.lean,Mathlib/Analysis/Convex/Quasiconvex.lean,Mathlib/Analysis/Convex/Slope.lean,Mathlib/Analysis/Convex/SpecificFunctions/Basic.lean,Mathlib/Analysis/Convex/SpecificFunctions/Deriv.lean,Mathlib/Analysis/Convex/Strong.lean,Mathlib/Analysis/MeanInequalities.lean,Mathlib/Analysis/MeanInequalitiesPow.lean,Mathlib/Analysis/Normed/Module/Convex.lean,Mathlib/Analysis/Seminorm.lean,Mathlib/Analysis/SpecialFunctions/Log/NegMulLog.lean,Mathlib/Analysis/SpecialFunctions/Pochhammer.lean,Mathlib/MeasureTheory/Measure/Decomposition/IntegralRNDeriv.lean,Mathlib/NumberTheory/Harmonic/GammaDeriv.lean |
34 |
2 |
['github-actions', 'leanprover-community-bot-assistant'] |
nobody |
410-13120 1 year ago |
410-13122 410 days ago |
6-39812 6 days |
| 18441 |
ADedecker author:ADedecker |
refactor(AdicTopology): use new API for algebraic filter bases, and factor some code |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #18437
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
t-algebra
label:t-algebra$ |
847/159 |
Mathlib.lean,Mathlib/Topology/Algebra/FilterBasis.lean,Mathlib/Topology/Algebra/FilterBasisNew.lean,Mathlib/Topology/Algebra/Nonarchimedean/AdicTopology.lean,Mathlib/Topology/Algebra/Nonarchimedean/Bases.lean,Mathlib/Topology/Algebra/Nonarchimedean/BasesNew.lean |
6 |
3 |
['ADedecker', 'github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
398-4861 1 year ago |
630-2760 630 days ago |
0-679 11 minutes |
| 18439 |
ADedecker author:ADedecker |
refactor: use new algebraic filter bases API in `FiniteAdeleRing` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #18437
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
t-algebra
label:t-algebra$ |
699/21 |
Mathlib.lean,Mathlib/RingTheory/DedekindDomain/FiniteAdeleRing.lean,Mathlib/Topology/Algebra/FilterBasis.lean,Mathlib/Topology/Algebra/FilterBasisNew.lean,Mathlib/Topology/Algebra/Nonarchimedean/Bases.lean,Mathlib/Topology/Algebra/Nonarchimedean/BasesNew.lean |
6 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
398-4859 1 year ago |
630-4403 630 days ago |
0-619 10 minutes |
| 18438 |
ADedecker author:ADedecker |
refactor: adapt `KrullTopology` to the new algebraic filter bases API |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #18437
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
t-algebra
label:t-algebra$ |
771/168 |
Mathlib.lean,Mathlib/FieldTheory/KrullTopology.lean,Mathlib/Topology/Algebra/FilterBasis.lean,Mathlib/Topology/Algebra/FilterBasisNew.lean,Mathlib/Topology/Algebra/Nonarchimedean/Bases.lean,Mathlib/Topology/Algebra/Nonarchimedean/BasesNew.lean |
6 |
5 |
['ADedecker', 'AntoineChambert-Loir', 'github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
398-4858 1 year ago |
630-5045 630 days ago |
0-638 10 minutes |
| 13964 |
pechersky author:pechersky |
feat(Data/DigitExpansion): begin defining variant of reals without rationals |
Based on a de Bruijn 1976 paper.
This file is just the basic definition of a digit expansion. Will be followed up with further constructions.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
|
518/0 |
Mathlib.lean,Mathlib/Data/DigitExpansion/Defs.lean,docs/references.bib |
3 |
11 |
['eric-wieser', 'github-actions', 'kim-em', 'pechersky'] |
dupuisf assignee:dupuisf |
394-73549 1 year ago |
633-13365 633 days ago |
129-57999 129 days |
| 24823 |
eric-wieser author:eric-wieser |
refactor: add `hom` lemmas for the `MonoidalCategory` structure on `ModuleCat` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
148/164 |
Mathlib/Algebra/Category/FGModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Adjunctions.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Closed.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Symmetric.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Free.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Generator.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Monoidal.lean,Mathlib/CategoryTheory/Monoidal/Internal/Module.lean,Mathlib/RepresentationTheory/Coinvariants.lean,Mathlib/RepresentationTheory/Rep.lean |
11 |
21 |
['101damnations', 'YaelDillies', 'eric-wieser', 'github-actions', 'joelriou', 'kbuzzard', 'leanprover-community-bot-assistant'] |
101damnations assignee:101damnations |
382-38209 1 year ago |
382-38209 382 days ago |
40-60910 40 days |
| 25071 |
erdOne author:erdOne |
feat(EllipticCurve): basic API for singular cubics |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebraic-geometry
|
320/0 |
Mathlib.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Singular/Basic.lean,Mathlib/AlgebraicGeometry/EllipticCurve/VariableChange.lean |
3 |
35 |
['Multramate', 'acmepjz', 'erdOne', 'github-actions', 'leanprover-community-bot-assistant'] |
nobody |
382-37963 1 year ago |
382-37964 382 days ago |
45-4562 45 days |
| 25988 |
Multramate author:Multramate |
refactor(AlgebraicGeometry/EllipticCurve/*): replace Fin 3 with products |
This PR continues the work from #24593.
Original PR: https://github.com/leanprover-community/mathlib4/pull/24593 |
merge-conflict
t-algebraic-geometry
|
1000/1022 |
Mathlib/AlgebraicGeometry/EllipticCurve/Jacobian/Basic.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Jacobian/Formula.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Jacobian/Point.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Projective/Basic.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Projective/Formula.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Projective/Point.lean |
6 |
3 |
['Multramate', 'github-actions', 'leanprover-community-bot-assistant'] |
nobody |
382-37651 1 year ago |
382-37651 382 days ago |
18-21880 18 days |
| 26067 |
mapehe author:mapehe |
feat(Topology/StoneCech): exists_continuous_surjection_from_StoneCech_to_dense_range |
This lemma formalises the following version of the maximality property of the Stone–Čech compactification: If `f : α → β` is a continuous map from a topological space `α` to a Hausdorff space `β` with dense range, then there exists a continuous surjection from `StoneCech α` to `β` extending `f`. In particular, `StoneCech α` is the “largest” compact Hausdorff space into which `α` densely embeds, in the sense that any other such space is a continuous image of it.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
|
18/0 |
Mathlib/Topology/StoneCech.lean |
1 |
2 |
['github-actions', 'leanprover-community-bot-assistant'] |
nobody |
379-19029 1 year ago |
379-19029 379 days ago |
20-8582 20 days |
| 25238 |
Hagb author:Hagb |
feat(Tactic/ComputeDegree): add support for scalar multiplication with different types |
It would be able to deal with `a • (X : R[X])` where `a : S` is in a different type `S` with `[SMulZeroClass S R]`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #25237
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
new-contributor
|
17/5 |
Mathlib/Tactic/ComputeDegree.lean,MathlibTest/ComputeDegree.lean |
2 |
3 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot'] |
nobody |
352-16291 11 months ago |
382-37960 382 days ago |
38-26044 38 days |
| 18646 |
jxjwan author:jxjwan |
feat(RingTheory): isotypic components |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-ring-theory
new-contributor
|
308/0 |
Mathlib/Order/CompactlyGenerated/Basic.lean,Mathlib/RingTheory/Isotypic.lean,Mathlib/RingTheory/SimpleModule.lean |
3 |
1 |
['github-actions'] |
nobody |
351-18312 11 months ago |
604-11905 604 days ago |
20-15640 20 days |
| 26200 |
adomani author:adomani |
fix: add label when landrun fails |
Adds the `permission-denied` label on PRs that get blocked by landrun.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
CI
|
68/8 |
.github/build.in.yml,.github/workflows/bors.yml,.github/workflows/build.yml,.github/workflows/build_fork.yml |
4 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
350-53644 11 months ago |
350-53644 350 days ago |
46-52210 46 days |
| 27987 |
kckennylau author:kckennylau |
feat(RingTheory/Valuation): define ball, closed ball, and sphere |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
The pullback PR of #26827 and #27451.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-ring-theory
large-import
|
73/0 |
Mathlib/RingTheory/Valuation/Basic.lean |
1 |
4 |
['JovanGerb', 'github-actions', 'kckennylau', 'mathlib4-merge-conflict-bot'] |
nobody |
344-85776 11 months ago |
344-85777 344 days ago |
6-6455 6 days |
| 27003 |
eric-wieser author:eric-wieser |
chore: use `Simp.ResultQ` more often |
Also uses `~q` in place of manual `isDefEq` matching.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
|
18/22 |
Mathlib/Tactic/NormNum/Core.lean,Mathlib/Tactic/NormNum/Result.lean,Mathlib/Tactic/ReduceModChar.lean |
3 |
7 |
['JovanGerb', 'eric-wieser', 'github-actions', 'mathlib4-merge-conflict-bot'] |
JovanGerb assignee:JovanGerb |
343-14000 11 months ago |
343-14001 343 days ago |
32-70098 32 days |
| 25401 |
digama0 author:digama0 |
feat(Util): SuppressSorry option |
See also leanprover/lean4#8611 and [#lean4 > Silent sorry @ 💬](https://leanprover.zulipchat.com/#narrow/channel/270676-lean4/topic/Silent.20sorry/near/503537964). This is a stop-gap solution while leanprover/lean4#8611 is underway, but it works about as well as any other built in option. Hooking declaration elaborators turns out to be a very powerful technique.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
|
342/0 |
Mathlib.lean,Mathlib/Util/CommandElabHook.lean,Mathlib/Util/SuppressSorry.lean,MathlibTest/suppressSorry.lean |
4 |
15 |
['digama0', 'eric-wieser', 'github-actions', 'mathlib4-merge-conflict-bot'] |
alexjbest assignee:alexjbest |
342-55196 11 months ago |
342-55196 342 days ago |
71-28496 71 days |
| 28622 |
alreadydone author:alreadydone |
chore(Mathlib): replace `=>` by `↦` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
51792/51792 |
Mathlib/Algebra/AddTorsor/Basic.lean,Mathlib/Algebra/AddTorsor/Defs.lean,Mathlib/Algebra/Algebra/Basic.lean,Mathlib/Algebra/Algebra/Bilinear.lean,Mathlib/Algebra/Algebra/Defs.lean,Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/Algebra/Algebra/Hom.lean,Mathlib/Algebra/Algebra/Hom/Rat.lean,Mathlib/Algebra/Algebra/NonUnitalHom.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Operations.lean,Mathlib/Algebra/Algebra/Opposite.lean,Mathlib/Algebra/Algebra/Prod.lean,Mathlib/Algebra/Algebra/Rat.lean,Mathlib/Algebra/Algebra/Spectrum/Basic.lean,Mathlib/Algebra/Algebra/Spectrum/Pi.lean,Mathlib/Algebra/Algebra/Spectrum/Quasispectrum.lean,Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Algebra/Subalgebra/Centralizer.lean,Mathlib/Algebra/Algebra/Subalgebra/Directed.lean,Mathlib/Algebra/Algebra/Subalgebra/IsSimpleOrder.lean,Mathlib/Algebra/Algebra/Subalgebra/Lattice.lean,Mathlib/Algebra/Algebra/Subalgebra/Matrix.lean,Mathlib/Algebra/Algebra/Subalgebra/Operations.lean,Mathlib/Algebra/Algebra/Subalgebra/Pointwise.lean,Mathlib/Algebra/Algebra/Subalgebra/Prod.lean,Mathlib/Algebra/Algebra/Subalgebra/Unitization.lean,Mathlib/Algebra/Algebra/Tower.lean,Mathlib/Algebra/Algebra/TransferInstance.lean,Mathlib/Algebra/Algebra/Unitization.lean,Mathlib/Algebra/Algebra/ZMod.lean,Mathlib/Algebra/AlgebraicCard.lean,Mathlib/Algebra/BigOperators/Associated.lean,Mathlib/Algebra/BigOperators/Expect.lean,Mathlib/Algebra/BigOperators/Fin.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/BigOperators/Finsupp/Basic.lean,Mathlib/Algebra/BigOperators/Finsupp/Fin.lean,Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/BigOperators/Group/Finset/Defs.lean,Mathlib/Algebra/BigOperators/Group/Finset/Piecewise.lean,Mathlib/Algebra/BigOperators/Group/Finset/Sigma.lean,Mathlib/Algebra/BigOperators/Group/List/Basic.lean,Mathlib/Algebra/BigOperators/Group/List/Defs.lean,Mathlib/Algebra/BigOperators/Group/List/Lemmas.lean,Mathlib/Algebra/BigOperators/Group/Multiset/Basic.lean,Mathlib/Algebra/BigOperators/Group/Multiset/Defs.lean,Mathlib/Algebra/BigOperators/GroupWithZero/Finset.lean,Mathlib/Algebra/BigOperators/Intervals.lean,Mathlib/Algebra/BigOperators/Option.lean,Mathlib/Algebra/BigOperators/Pi.lean,Mathlib/Algebra/BigOperators/Ring/Finset.lean,Mathlib/Algebra/BigOperators/Ring/Multiset.lean,Mathlib/Algebra/Category/AlgCat/Basic.lean,Mathlib/Algebra/Category/AlgCat/Limits.lean,Mathlib/Algebra/Category/AlgCat/Monoidal.lean,Mathlib/Algebra/Category/BialgCat/Basic.lean,Mathlib/Algebra/Category/BoolRing.lean,Mathlib/Algebra/Category/CoalgCat/Basic.lean,Mathlib/Algebra/Category/CoalgCat/ComonEquivalence.lean,Mathlib/Algebra/Category/FGModuleCat/Limits.lean,Mathlib/Algebra/Category/Grp/AB.lean,Mathlib/Algebra/Category/Grp/Adjunctions.lean,Mathlib/Algebra/Category/Grp/Basic.lean,Mathlib/Algebra/Category/Grp/Biproducts.lean,Mathlib/Algebra/Category/Grp/CartesianMonoidal.lean,Mathlib/Algebra/Category/Grp/Colimits.lean,Mathlib/Algebra/Category/Grp/EpiMono.lean,Mathlib/Algebra/Category/Grp/FilteredColimits.lean,Mathlib/Algebra/Category/Grp/Images.lean,Mathlib/Algebra/Category/Grp/Kernels.lean,Mathlib/Algebra/Category/Grp/LargeColimits.lean,Mathlib/Algebra/Category/Grp/LeftExactFunctor.lean,Mathlib/Algebra/Category/Grp/Limits.lean,Mathlib/Algebra/Category/Grp/Preadditive.lean,Mathlib/Algebra/Category/Grp/ZModuleEquivalence.lean,Mathlib/Algebra/Category/Grp/Zero.lean,Mathlib/Algebra/Category/GrpWithZero.lean,Mathlib/Algebra/Category/HopfAlgCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Adjunctions.lean,Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Biproducts.lean,Mathlib/Algebra/Category/ModuleCat/ChangeOfRings.lean,Mathlib/Algebra/Category/ModuleCat/Colimits.lean,Mathlib/Algebra/Category/ModuleCat/EpiMono.lean,Mathlib/Algebra/Category/ModuleCat/FilteredColimits.lean,Mathlib/Algebra/Category/ModuleCat/Images.lean,Mathlib/Algebra/Category/ModuleCat/Injective.lean,Mathlib/Algebra/Category/ModuleCat/Kernels.lean,Mathlib/Algebra/Category/ModuleCat/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Closed.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Symmetric.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Abelian.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Colimits.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Pushforward.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Sheafify.lean,Mathlib/Algebra/Category/ModuleCat/Products.lean |
3838 |
4 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
336-58676 11 months ago |
336-58677 336 days ago |
0-66771 18 hours |
| 28626 |
alreadydone author:alreadydone |
chore(Archive, Counterexamples): replace => by ↦ |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
288/288 |
Archive/Arithcc.lean,Archive/Examples/IfNormalization/Result.lean,Archive/Examples/IfNormalization/WithoutAesop.lean,Archive/Examples/PropEncodable.lean,Archive/Imo/Imo1959Q1.lean,Archive/Imo/Imo1960Q1.lean,Archive/Imo/Imo1962Q4.lean,Archive/Imo/Imo1972Q5.lean,Archive/Imo/Imo1977Q6.lean,Archive/Imo/Imo1981Q3.lean,Archive/Imo/Imo1987Q1.lean,Archive/Imo/Imo1988Q6.lean,Archive/Imo/Imo1994Q1.lean,Archive/Imo/Imo1998Q2.lean,Archive/Imo/Imo2001Q2.lean,Archive/Imo/Imo2006Q3.lean,Archive/Imo/Imo2006Q5.lean,Archive/Imo/Imo2008Q2.lean,Archive/Imo/Imo2008Q4.lean,Archive/Imo/Imo2011Q3.lean,Archive/Imo/Imo2013Q1.lean,Archive/Imo/Imo2019Q1.lean,Archive/Imo/Imo2024Q5.lean,Archive/MiuLanguage/Basic.lean,Archive/MiuLanguage/DecisionSuf.lean,Archive/OxfordInvariants/Summer2021/Week3P1.lean,Archive/Sensitivity.lean,Archive/Wiedijk100Theorems/AbelRuffini.lean,Archive/Wiedijk100Theorems/AreaOfACircle.lean,Archive/Wiedijk100Theorems/AscendingDescendingSequences.lean,Archive/Wiedijk100Theorems/BallotProblem.lean,Archive/Wiedijk100Theorems/BirthdayProblem.lean,Archive/Wiedijk100Theorems/BuffonsNeedle.lean,Archive/Wiedijk100Theorems/CubingACube.lean,Archive/Wiedijk100Theorems/FriendshipGraphs.lean,Archive/Wiedijk100Theorems/Konigsberg.lean,Archive/Wiedijk100Theorems/Partition.lean,Archive/Wiedijk100Theorems/SumOfPrimeReciprocalsDiverges.lean,Archive/ZagierTwoSquares.lean,Counterexamples/AharoniKorman.lean,Counterexamples/CanonicallyOrderedCommSemiringTwoMul.lean,Counterexamples/CharPZeroNeCharZero.lean,Counterexamples/CliffordAlgebraNotInjective.lean,Counterexamples/DirectSumIsInternal.lean,Counterexamples/GameMultiplication.lean,Counterexamples/Girard.lean,Counterexamples/HomogeneousPrimeNotPrime.lean,Counterexamples/MapFloor.lean,Counterexamples/MonicNonRegular.lean,Counterexamples/Phillips.lean,Counterexamples/Pseudoelement.lean,Counterexamples/QuadraticForm.lean,Counterexamples/SorgenfreyLine.lean,Counterexamples/ZeroDivisorsInAddMonoidAlgebras.lean |
54 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
335-1402 11 months ago |
335-1403 335 days ago |
2-47570 2 days |
| 27403 |
MoritzBeroRoos author:MoritzBeroRoos |
fix: replace probably erroneous usage of ⬝ (with old \cdot) by · (with \centerdot) |
Discussion at [zulip](https://leanprover.zulipchat.com/#narrow/channel/270676-lean4/topic/.5Ccdot.20!.3D.20.5Ccenterdot).
Currently the abbreviations \cdot and \centerdot resolve to different, with the naked eye nearly undistinguishable symbols (despite the c in cdot surely standing for center..).
This pr replaces instances of ⬝ where · was probably meant.
All of the replacement is in comments, except for the file bench_summary.lean which is used for priting the github benchmark results. Since this file is about scientific notation of numbers, sure · was meant to be used, not a rectangle.
[Related](https://github.com/leanprover-community/mathlib4/pull/27399)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
new-contributor
|
195/195 |
Mathlib/Algebra/ContinuedFractions/Computation/Approximations.lean,Mathlib/Algebra/DirectSum/Idempotents.lean,Mathlib/Algebra/Lie/Derivation/Basic.lean,Mathlib/Algebra/Module/Equiv/Basic.lean,Mathlib/AlgebraicGeometry/EllipticCurve/DivisionPolynomial/Basic.lean,Mathlib/Analysis/Analytic/Constructions.lean,Mathlib/Analysis/CStarAlgebra/CStarMatrix.lean,Mathlib/Analysis/Calculus/ContDiff/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Analysis/Calculus/FDeriv/Symmetric.lean,Mathlib/Analysis/Fourier/FourierTransformDeriv.lean,Mathlib/Analysis/InnerProductSpace/Dual.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/Normed/Unbundled/InvariantExtension.lean,Mathlib/Analysis/SpecialFunctions/Complex/CircleAddChar.lean,Mathlib/Combinatorics/Configuration.lean,Mathlib/Combinatorics/SimpleGraph/AdjMatrix.lean,Mathlib/Combinatorics/SimpleGraph/LapMatrix.lean,Mathlib/Data/Matrix/Block.lean,Mathlib/Data/Matrix/ConjTranspose.lean,Mathlib/Data/Matrix/Hadamard.lean,Mathlib/Data/Matrix/Mul.lean,Mathlib/Data/Matrix/Notation.lean,Mathlib/Data/Matrix/Reflection.lean,Mathlib/Data/Matrix/RowCol.lean,Mathlib/Data/Matrix/Vec.lean,Mathlib/FieldTheory/PurelyInseparable/PerfectClosure.lean,Mathlib/Geometry/Manifold/GroupLieAlgebra.lean,Mathlib/GroupTheory/Coxeter/Matrix.lean,Mathlib/LinearAlgebra/CrossProduct.lean,Mathlib/LinearAlgebra/Matrix/BilinearForm.lean,Mathlib/LinearAlgebra/Matrix/DotProduct.lean,Mathlib/LinearAlgebra/Matrix/Nondegenerate.lean,Mathlib/LinearAlgebra/Matrix/Orthogonal.lean,Mathlib/LinearAlgebra/Matrix/PosDef.lean,Mathlib/LinearAlgebra/Matrix/SchurComplement.lean,Mathlib/LinearAlgebra/Matrix/SesquilinearForm.lean,Mathlib/LinearAlgebra/Matrix/Trace.lean,Mathlib/LinearAlgebra/Multilinear/Basic.lean,Mathlib/LinearAlgebra/PerfectPairing/Matrix.lean,Mathlib/LinearAlgebra/Projectivization/Constructions.lean,Mathlib/NumberTheory/NumberField/ProductFormula.lean,Mathlib/NumberTheory/SiegelsLemma.lean,Mathlib/RingTheory/DividedPowers/SubDPIdeal.lean,Mathlib/SetTheory/Ordinal/Veblen.lean,Mathlib/Topology/Algebra/Module/Equiv.lean,Mathlib/Topology/Homeomorph/Lemmas.lean,Mathlib/Topology/Instances/Matrix.lean,scripts/bench_summary.lean |
49 |
5 |
['eric-wieser', 'github-actions', 'grunweg', 'leanprover-community-bot-assistant'] |
nobody |
333-34438 10 months ago |
356-10360 356 days ago |
7-54661 7 days |
| 28042 |
kckennylau author:kckennylau |
feat(Topology/ValuativeRel): a topological basis indexed by pairs of elements |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
The pullback PR of #27314 and #27163.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-ring-theory
|
140/23 |
Mathlib/RingTheory/Valuation/ValuativeRel.lean,Mathlib/Topology/Algebra/Valued/ValuativeRel.lean |
2 |
3 |
['github-actions', 'grunweg', 'mathlib4-merge-conflict-bot'] |
nobody |
333-34392 10 months ago |
342-85836 342 days ago |
7-4998 7 days |
| 27399 |
MoritzBeroRoos author:MoritzBeroRoos |
chore: replace every usage of ⬝ᵥ (with old \cdot) by ·ᵥ (with \centerdot) |
Discussion at [zulip](https://leanprover.zulipchat.com/#narrow/channel/270676-lean4/topic/.5Ccdot.20!.3D.20.5Ccenterdot).
Currently the abbreviations `\cdot` and `\centerdot` resolve to different, with the naked eye nearly undistinguishable symbols (despite the c in cdot surely standing for `center`..):
- `\cdot` gives ⬝ [U+2B1D](https://www.compart.com/en/unicode/U+2B1D) "Black Very Small Square"
- `\centerdot` gives · [U+00B7](https://www.compart.com/en/unicode/U+00B7) "Middle Dot"
Mathlib mostly uses the `\centerdot` variant, except for the dotProduct notation and some probably unsuspecting people wanting \centerdot but getting \cdot in their comments and 6 uses of a notation using the raw `\cdot` without any subscript at `Mathlib\Topology\Homotopy\Product.lean`.
This PR replaces the dot product `⬝ᵥ` with its `\centerdot` counterpart `·ᵥ`. The related PR [here](https://github.com/leanprover/vscode-lean4/pull/639) can then overwrite the `\cdot` abbreviation, to produce the same symbol as the `centerdot` abbreviation does.
---
[](https://gitpod.io/from-referrer/)
|
merge-conflict
new-contributor
|
133/133 |
Mathlib/Analysis/CStarAlgebra/CStarMatrix.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Combinatorics/Configuration.lean,Mathlib/Combinatorics/SimpleGraph/AdjMatrix.lean,Mathlib/Combinatorics/SimpleGraph/LapMatrix.lean,Mathlib/Data/Matrix/Block.lean,Mathlib/Data/Matrix/ConjTranspose.lean,Mathlib/Data/Matrix/Hadamard.lean,Mathlib/Data/Matrix/Mul.lean,Mathlib/Data/Matrix/Notation.lean,Mathlib/Data/Matrix/Reflection.lean,Mathlib/Data/Matrix/RowCol.lean,Mathlib/Data/Matrix/Vec.lean,Mathlib/LinearAlgebra/CrossProduct.lean,Mathlib/LinearAlgebra/Matrix/BilinearForm.lean,Mathlib/LinearAlgebra/Matrix/DotProduct.lean,Mathlib/LinearAlgebra/Matrix/Nondegenerate.lean,Mathlib/LinearAlgebra/Matrix/Orthogonal.lean,Mathlib/LinearAlgebra/Matrix/PosDef.lean,Mathlib/LinearAlgebra/Matrix/SchurComplement.lean,Mathlib/LinearAlgebra/Matrix/SesquilinearForm.lean,Mathlib/LinearAlgebra/Matrix/Trace.lean,Mathlib/LinearAlgebra/PerfectPairing/Matrix.lean,Mathlib/LinearAlgebra/Projectivization/Constructions.lean,Mathlib/Topology/Instances/Matrix.lean |
25 |
6 |
['MoritzBeroRoos', 'eric-wieser', 'github-actions', 'leanprover-community-bot-assistant'] |
nobody |
332-82670 10 months ago |
356-10361 356 days ago |
7-62439 7 days |
| 28148 |
kckennylau author:kckennylau |
feat(Matrix): Simproc and Rw-proc for Matrix Transpose |
Co-authored by Aaron Liu.
```lean
example : !![1, 2, 3; 4, 5, 6]ᵀ = !![1, 4; 2, 5; 3, 6] := by
rw [transpose_of% 2 3]
example : !![1, 2, 3; 4, 5, 6]ᵀ = !![1, 4; 2, 5; 3, 6] := by
rw [transpose_of]
example : !![1, 2, 3; 4, 5, 6]ᵀ = !![1, 4; 2, 5; 3, 6] := by
simp only [matrix_transpose]
```
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
|
267/8 |
Mathlib.lean,Mathlib/Data/Matrix/Notation.lean,Mathlib/LinearAlgebra/UnitaryGroup.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Simproc/Matrix.lean,MathlibTest/Simproc/Matrix.lean,MathlibTest/matrix.lean,scripts/noshake.json |
8 |
32 |
['eric-wieser', 'github-actions', 'kckennylau', 'mathlib4-merge-conflict-bot', 'plp127'] |
eric-wieser assignee:eric-wieser |
328-39604 10 months ago |
328-39605 328 days ago |
13-1483 13 days |
| 26908 |
robin-carlier author:robin-carlier |
feat(CategoryTheory/Monoidal/DayConvolution): alternative ext principle for unitors |
Currently, our infrastructure for left/right unitors for Day convolution of functors `C ⥤ V` do not have satisfactory extensionality principle: the current way to characterize morphisms out of `U ⊛ F` is the default extensionality principle for Day convolution, which characterizes first such functors via functors out of `U ⊠ F`. Left unitors are then obtained using the fact `U ⊠ F` is a left Kan extension of a functor from `PUnit × C` (which is equivalent to `C`) but we did not record on its own this principle.
Using the transitivity of left Kan extensions proved in #26899, we directly exhibit `U ⊛ F` as a left Kan extension of `F ⋙ tensorLeft (𝟙_ V)` along `tensorLeft (𝟙_ C)`. The unit of this Kan extension is composed exactly of the morphisms that appear in the [characterization of left unitors](https://leanprover-community.github.io/mathlib4_docs/Mathlib/CategoryTheory/Monoidal/DayConvolution.html#CategoryTheory.MonoidalCategory.DayConvolutionUnit.leftUnitor_hom_unit_app).
We also slightly generalize the instances that express that external products with unitors are left Kan extensions, so that they can be used when taking external products with more complicated functors than currently. This is again useful when chaining extensionality lemmas for morphisms out of terms of the form `(F ⊛ U) ⊛ G`.
We prove a similar thing for right unitors
With this, it should be possible to have a much more satisfactory way of working with Day convolutions: this allows to "elimiinate" units without ending up with terms in an external product.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #26899
- [ ] depends on: #26906
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-category-theory
|
307/18 |
Mathlib/CategoryTheory/Functor/KanExtension/Basic.lean,Mathlib/CategoryTheory/Monoidal/DayConvolution.lean |
2 |
4 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
316-85950 10 months ago |
316-85951 316 days ago |
0-1812 30 minutes |
| 27150 |
robin-carlier author:robin-carlier |
feat(CategoryTheory/Monoidal/DayConvolution): constructors for braided and symmetric structure on day convolutions monoidal categories |
Following the pattern in #27119, we give API to construct `BraidedCategory` and `SymmetricCategory` structures on a monoidal
category equipped with a `LawfulDayConvolutionMonoidalCategoryStruct`. To achieve this, we introduce an other type class
`LawfulDayConvolutionBraidedCategoryStruct` that bundles an associator isomorphism that behaves like the one constructed for functors in #27067.
We provide a noncomputable constructor for this typeclass that takes as input fullness of the "realization" functor to a category of functors, and we show that the typeclasses are sufficient to define the desired structures.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #27067
- [x] depends on: #26820
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-category-theory
|
826/9 |
Mathlib/CategoryTheory/Monoidal/DayConvolution.lean,Mathlib/CategoryTheory/Monoidal/DayConvolution/Braided.lean |
2 |
5 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
316-80989 10 months ago |
372-24284 372 days ago |
0-1002 16 minutes |
| 27119 |
robin-carlier author:robin-carlier |
feat(CategoryTheory/Monoidal/DayConvolution): constructors for closed monoidal day convolution monoidal structures |
Following the pattern introduced in #26798 and #26820 and using results of #26879, we introduce a typeclass
`LawfulDayConvolutionClosedMonoidalCategoryStruct` that encodes the data needed on a `LawfulDayConvolutionMonoidalCategoryStruct` to define well-behaved internal homs. We give a constructor assuming existence of relevant ends, and prove that this data defines a `MonoidalClosed` instance on the monoidal category structures one can deduce from `LawfulDayConvolutionMonoidalCategoryStruct`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #27079
- [x] depends on: #27091
- [x] depends on: #26879
- [x] depends on: #26820
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-category-theory
|
900/9 |
Mathlib/CategoryTheory/Monoidal/DayConvolution.lean,Mathlib/CategoryTheory/Monoidal/DayConvolution/Closed.lean |
2 |
6 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
316-8440 10 months ago |
373-29752 373 days ago |
0-1 1 second |
| 28623 |
gilesgshaw author:gilesgshaw |
feat(Logic/Basic): minor additions and simplification of proofs |
Add new theorems and simplify proofs.
Specifically, we add the family of related theorems `apply_dite_iff_exists`, `apply_dite_iff_forall`, `apply_ite_iff_and` and `apply_ite_iff_or`.
For each other 'family' of theorems in the file that is analogous to the above, we do the following
- Simplify proofs where possible, e.g. by appealing to the new theorems
- Complete the family, if any of the corresponding four are missing
- Rename to ensure consistency with the above pattern
---
|
merge-conflict
t-logic
new-contributor
|
83/55 |
Archive/Examples/IfNormalization/Result.lean,Archive/Examples/IfNormalization/WithoutAesop.lean,Mathlib/Algebra/ContinuedFractions/Computation/Translations.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Algebra/Notation/Indicator.lean,Mathlib/LinearAlgebra/Matrix/Rank.lean,Mathlib/Logic/Basic.lean,Mathlib/MeasureTheory/Measure/WithDensity.lean,Mathlib/SetTheory/Ordinal/Notation.lean |
9 |
12 |
['eric-wieser', 'gilesgshaw', 'github-actions', 'mathlib4-merge-conflict-bot', 'plp127'] |
awainverse assignee:awainverse |
316-2301 10 months ago |
316-2302 316 days ago |
10-61840 10 days |
| 26154 |
ADedecker author:ADedecker |
refactor: add refactored APIs for algebraic filter bases |
This PR continues the work from #18437.
Original PR: https://github.com/leanprover-community/mathlib4/pull/18437 |
merge-conflict
t-topology
|
651/0 |
Mathlib.lean,Mathlib/Topology/Algebra/FilterBasis.lean,Mathlib/Topology/Algebra/FilterBasisNew.lean,Mathlib/Topology/Algebra/Nonarchimedean/Bases.lean,Mathlib/Topology/Algebra/Nonarchimedean/BasesNew.lean |
5 |
3 |
['ADedecker', 'github-actions', 'mathlib4-merge-conflict-bot'] |
PatrickMassot assignee:PatrickMassot |
310-14545 10 months ago |
310-14546 310 days ago |
87-79752 87 days |
| 29330 |
plp127 author:plp127 |
chore: define `Fin.cycleIcc` with conditions |
Redefine `Fin.cycleIcc` using conditionals instead of composing existing `Fin` operations together. Its worst-case runtime drops from O(n) to O(1). As a bonus, the definition no longer needs explaining.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-group-theory
|
61/68 |
Mathlib/GroupTheory/Perm/Fin.lean |
1 |
10 |
['JovanGerb', 'eric-wieser', 'github-actions', 'mathlib4-merge-conflict-bot', 'plp127', 'tb65536'] |
nobody |
301-26142 9 months ago |
301-26143 301 days ago |
19-81030 19 days |
| 21950 |
erdOne author:erdOne |
feat(NumberTheory/Padics): the completion of `ℚ` at a finite place is `ℚ_[p]` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-number-theory
|
253/1 |
Mathlib.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/NumberTheory/Padics/HeightOneSpectrum.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/Topology/Algebra/Valued/WithVal.lean,Mathlib/Topology/Algebra/WithZeroMulInt.lean,Mathlib/Topology/Algebra/WithZeroTopology.lean |
7 |
33 |
['Ruben-VandeVelde', 'erdOne', 'faenuccio', 'github-actions', 'leanprover-community-bot-assistant', 'pechersky', 'smmercuri', 'xroblot'] |
nobody |
299-1252 9 months ago |
380-1189 380 days ago |
73-10883 73 days |
| 27214 |
robin-carlier author:robin-carlier |
feat(CategoryTheory/Limits/Shapes/Pullback/Categorical): Categorical pullback squares |
In this PR, we give the definition and first basic properties of categorical pullback squares.
Using our previous work on `CategoricalPullback`, we define a typeclass `CatPullbackSquare T L R B` that asserts that a given `CatCommSq T L R B` is a "pullback square": this is the data of a chosen adjoint equivalence to the canonical functor from the top left corner of the square to the categorical pulback of its leg. Using this equivalence, be derive a universal property for functors from `X`with values in the top left corner of the square: they are equivalent to `CatCommSqOver R B X`, the category of categorical commutative squares over the cospan `R, B` with top left corner `X`.
We prove some coherence result for this equivalence, most notably an isomorphism that, given `S : CatCommSqOver R B X`, bundles the two commutative triangles formed by the induced functor, and the coherence between the squares that these isomorphisms satisfy: this is conveniently bundled in the data of a single isomorphisms of `CatCommSqOver R B X`.
Finally, we provide a `Prop`-class `IsCatPullbackSquare` that merely asserts the existence (via `Nonempty`) of the relevant data: we show that it is tautotogically equivalent to the propopsition that the canonical functor to the categorical pullback is an equivalence.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #26679
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-category-theory
|
786/1 |
Mathlib.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/Categorical/Basic.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/Categorical/Square.lean |
3 |
3 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
295-77734 9 months ago |
295-77735 295 days ago |
0-4413 1 hour |
| 26466 |
robin-carlier author:robin-carlier |
feat(AlgebraicTopology/SimplexCategory/Augmented): the canonical monoid object in the augmented simplex category |
Show that in the augmented simplex category, `⦋0⦌` is an internal monoid object.
Future work will show that this is in fact the universal monoid object: for any monoidal category `C`, evaluation at `⦋0⦌` induces an equivalence of categories between `Mon_ C` and the category of monoidal functors from `AugmentedSimplexCategory` to `C`. The resulting augmented cosimplicial object one gets from this construction is sometimes called the "monoidal bar construction" attached to a monoid.
This PR was split from #25743.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #25743
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebraic-topology
t-category-theory
|
571/111 |
Mathlib.lean,Mathlib/AlgebraicTopology/SimplexCategory/Augmented.lean,Mathlib/AlgebraicTopology/SimplexCategory/Augmented/Basic.lean,Mathlib/AlgebraicTopology/SimplexCategory/Augmented/Mon_.lean,Mathlib/AlgebraicTopology/SimplexCategory/Augmented/Monoidal.lean,Mathlib/AlgebraicTopology/SimplexCategory/Basic.lean |
6 |
4 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
295-10736 9 months ago |
390-18020 390 days ago |
0-1708 28 minutes |
| 26578 |
robin-carlier author:robin-carlier |
feat(CategoryTheory/Limits/Pullbacks/Categorical/CatCospanTransform): adjunctions of categorical cospans |
We build upon the bicategory-like structure developed in #26447 and #26412 to define the notion of adjunctions of categorical cospans. This is a structure encoding the data of two `CatCospanTransform`s, along with the usual unit and counit morphisms as part of the data, satisfying the usual left and right triangle identities. We provide basic API for these, such as extracting adjunctions between individual components. We also provide a proof that the notion satisfies a "coherence": with our chosen constructor, the forward direction of the structure `CatCommSq` on the left adjoints correspond to the inverse of the square for the right adjoints through `mateEquiv`.
These adjunctions will be used as a substrate for defining equivalences of categorical cospans in a future PR: such an equivalence will be a structure extending a `CatCospanAdjunction` with isomorphisms data on the unit and co-unit (we will however provide alternative constructors in sync with the constructor for equivalences of categories).
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #26447
- [x] depends on: #26547
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-category-theory
large-import
|
205/0 |
Mathlib/CategoryTheory/Limits/Shapes/Pullback/Categorical/CatCospanTransform.lean |
1 |
5 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
294-13961 9 months ago |
386-23133 386 days ago |
0-625 10 minutes |
| 23621 |
astrainfinita author:astrainfinita |
chore: deprecate `LinearOrderedComm{Monoid, Group}WithZero` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [x] depends on: #20676
|
merge-conflict
t-algebra
t-order
label:t-algebra$ |
261/205 |
Archive/Imo/Imo1998Q2.lean,Counterexamples/LinearOrderWithPosMulPosEqZero.lean,Mathlib/Algebra/Order/Field/Canonical.lean,Mathlib/Algebra/Order/Field/Rat.lean,Mathlib/Algebra/Order/Floor/Ring.lean,Mathlib/Algebra/Order/GroupWithZero/Canonical.lean,Mathlib/Algebra/Order/GroupWithZero/Finset.lean,Mathlib/Algebra/Order/Hom/Monoid.lean,Mathlib/Algebra/Order/Nonneg/Field.lean,Mathlib/Algebra/Order/Nonneg/Ring.lean,Mathlib/Algebra/Order/Ring/Nat.lean,Mathlib/Combinatorics/Additive/PluenneckeRuzsa.lean,Mathlib/Combinatorics/SimpleGraph/Triangle/Basic.lean,Mathlib/Data/ENNReal/Basic.lean,Mathlib/Data/NNRat/Lemmas.lean,Mathlib/Data/NNReal/Defs.lean,Mathlib/Data/Rat/Cast/Order.lean,Mathlib/FieldTheory/IntermediateField/Adjoin/Defs.lean,Mathlib/FieldTheory/RatFunc/AsPolynomial.lean,Mathlib/GroupTheory/ArchimedeanDensely.lean,Mathlib/NumberTheory/EllipticDivisibilitySequence.lean,Mathlib/NumberTheory/FunctionField.lean,Mathlib/NumberTheory/Ostrowski.lean,Mathlib/RingTheory/Valuation/Archimedean.lean,Mathlib/RingTheory/Valuation/Basic.lean,Mathlib/RingTheory/Valuation/ExtendToLocalization.lean,Mathlib/RingTheory/Valuation/Integers.lean,Mathlib/RingTheory/Valuation/Integral.lean,Mathlib/RingTheory/Valuation/Minpoly.lean,Mathlib/RingTheory/Valuation/Quotient.lean,Mathlib/RingTheory/Valuation/RankOne.lean,Mathlib/RingTheory/Valuation/ValExtension.lean,Mathlib/RingTheory/Valuation/ValuationRing.lean,Mathlib/RingTheory/Valuation/ValuationSubring.lean,Mathlib/SetTheory/Cardinal/Order.lean,Mathlib/Topology/Algebra/Valued/LocallyCompact.lean,Mathlib/Topology/Algebra/Valued/NormedValued.lean,Mathlib/Topology/Algebra/Valued/ValuationTopology.lean,Mathlib/Topology/Algebra/Valued/ValuedField.lean,Mathlib/Topology/Algebra/Valued/WithVal.lean,Mathlib/Topology/Algebra/WithZeroTopology.lean,Mathlib/Topology/UnitInterval.lean,MathlibTest/instance_diamonds.lean,scripts/noshake.json |
44 |
24 |
['YaelDillies', 'astrainfinita', 'github-actions', 'grunweg', 'leanprover-bot', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot'] |
kbuzzard assignee:kbuzzard |
290-82076 9 months ago |
461-54449 461 days ago |
5-42380 5 days |
| 27990 |
kckennylau author:kckennylau |
feat(Counterexamples): a nontrivial valuation with discrete topology |
This file constructs a valuation on `K[X]` satisfying `IsValuativeTopology K[X] ∧ Nonempty (valuation K[X]).RankOne ∧ IsNontrivial K[X] ∧ DiscreteTopology K[X]`, and proves that `IsValuativeTopology F ∧ IsNontrivial F ∧ DiscreteTopology F` is not possible if `F` is a field.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-ring-theory
|
172/0 |
Counterexamples.lean,Counterexamples/DiscreteTopologyWithNontrivialValuation.lean |
2 |
14 |
['github-actions', 'grunweg', 'kckennylau', 'mathlib4-merge-conflict-bot', 'pechersky'] |
nobody |
282-84207 9 months ago |
282-84208 282 days ago |
67-79609 67 days |
| 28132 |
dupuisf author:dupuisf |
feat: preliminary `grind` tags for `IsUnit` |
This PR adds preliminary `grind` tags for the `IsUnit` predicate.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
61/17 |
Mathlib/Algebra/Group/Action/Units.lean,Mathlib/Algebra/Group/Units/Defs.lean,Mathlib/Algebra/GroupWithZero/Units/Basic.lean,Mathlib/Algebra/Ring/Units.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Order.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Rpow/Basic.lean |
6 |
3 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
kim-em assignee:kim-em |
259-60805 8 months ago |
259-60806 259 days ago |
80-71575 80 days |
| 26827 |
pechersky author:pechersky |
feat(Analysis/Normed/ValuativeRel): helper instance for NormedField |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [x] depends on: #26713
- [x] depends on: #26826
|
merge-conflict
t-algebra
t-number-theory
t-analysis
label:t-algebra$ |
211/27 |
Mathlib.lean,Mathlib/Analysis/Normed/ValuativeRel.lean,Mathlib/Topology/Algebra/Valued/ValuativeRel.lean |
3 |
34 |
['ADedecker', 'adamtopaz', 'erdOne', 'github-actions', 'kbuzzard', 'kckennylau', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'pechersky'] |
kbuzzard assignee:kbuzzard |
252-3009 8 months ago |
252-3009 252 days ago |
122-66777 122 days |
| 22662 |
plp127 author:plp127 |
feat: Localization.Away.lift (computably) |
This PR adds `Localization.Away.lift'` and `Localization.Away.lift`, computable alternatives to `Localization.awayLift`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #24791
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
74/0 |
Mathlib/RingTheory/Localization/Away/Basic.lean |
1 |
18 |
['eric-wieser', 'github-actions', 'grunweg', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'plp127', 'vihdzp'] |
kim-em assignee:kim-em |
245-25668 8 months ago |
245-25669 245 days ago |
257-28368 257 days |
| 24850 |
pechersky author:pechersky |
feat(Topology/UniformSpace/Ultra): uniform spaces induced by pseudometrics are ultra if system is ultra |
Any uniform space has a natural system of pseudometrics definable on it,
comprised of those pseudometrics constructed from a descending chain of
equivalence relation entourages. In a nonarchimedean uniformity, this pseudometric system
induces the uniformity.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [x] depends on: #23111 |
merge-conflict
t-topology
|
509/1 |
Mathlib.lean,Mathlib/Topology/MetricSpace/BundledFun.lean,Mathlib/Topology/UniformSpace/Ultra/Pseudometrizable.lean |
3 |
9 |
['ADedecker', 'fpvandoorn', 'github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'pechersky'] |
urkud assignee:urkud |
245-25496 8 months ago |
245-25497 245 days ago |
177-42975 177 days |
| 26914 |
quangvdao author:quangvdao |
feat(Data/PFunctor/Univariate): more definitions for univariate `PFunctor` |
This PR defines several basic definitions of `PFunctor`, including zero, one, constants, monomials, coproduct (sum), product, sigma, pi, tensor product, universe lifting, and equivalence.
We also add: (1) simple lemmas connecting the basic definitions, (2) an automatically derived ext lemma for `PFunctor` via `@[ext]` attribute
Some things I'm not clear on:
- I define `HAdd` and `HMul` instances for coproduct and product of poly functors having different universe levels. Should I also define `Add` and `Mul` instances for poly functors having the same universe level?
- Is it ok to define notation for tensor product, i.e. `@[inherit_doc] scoped infixr:80 " ⊗ " => tensor`? I'm worried it might clash with other notation.
- Need a double-check on the priority of notation.
Some future definitions to add:
- Various equivalences arising from arithmetic identities, e.g., `P + 0 ≃ₚ P`.
- Definitions of Lenses and Charts (each of them will be a file or even a folder)
- Exponential objects (corresponding to both `prod` and `tensor`)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
|
144/5 |
Mathlib/Data/PFunctor/Univariate/Basic.lean |
1 |
20 |
['alexkeizer', 'eric-wieser', 'github-actions', 'mathlib4-merge-conflict-bot', 'quangvdao'] |
eric-wieser assignee:eric-wieser |
245-24974 8 months ago |
245-24975 245 days ago |
133-24576 133 days |
| 28125 |
nonisomorphiclinearmap author:nonisomorphiclinearmap |
feat(Combinatorics): basic definition of simplicial complexes |
This PR introduces the basic definition of a finite (abstract) simplicial complex, located in Mathlib/Combinatorics/SimplicialComplex/Basic.lean.
---
This is our first contribution to mathlib. This work was done as part of the Fields Institute Summer Undergraduate Program on formalization in topological combinatorics. Eventually, we aim to formalize Lovasz's proof of the Kneser Conjecture and this is a small stepping stone in that direction. Some other commits will shortly depend on this one.
We would like to acknowledge the Fields Institute for Research in Mathematical Sciences for their sponsorship. We would also like to thank our supervisors, Professor Chris Kapulkin and Mr. Daniel Carranza, for their guidance and support throughout this project. We would also like to thank our group members Tom Lindquist and Quang Minh Nguyen for our fruitful discussions. |
merge-conflict
t-combinatorics
new-contributor
|
374/0 |
Mathlib.lean,Mathlib/Combinatorics/SimplicialComplex/Basic.lean,Mathlib/Combinatorics/SimplicialComplex/Category.lean,Mathlib/Combinatorics/SimplicialComplex/FacePoset.lean,Mathlib/Combinatorics/SimplicialComplex/Hom.lean |
5 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
awainverse assignee:awainverse |
245-24669 8 months ago |
245-24670 245 days ago |
99-62977 99 days |
| 28871 |
JaafarTanoukhi author:JaafarTanoukhi |
feat(Combinatorics/Digraph): Tournaments |
Define orientations and tournaments. Related to #26771.
Co-authored-by: Rida Hamadani <mridahamadani@gmail.com>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-combinatorics
new-contributor
|
62/0 |
Mathlib.lean,Mathlib/Combinatorics/Digraph/Orientation.lean,Mathlib/Combinatorics/Digraph/Tournament.lean |
3 |
6 |
['JaafarTanoukhi', 'Rida-Hamadani', 'SnirBroshi', 'github-actions', 'mathlib4-merge-conflict-bot'] |
kmill assignee:kmill |
245-24516 8 months ago |
245-24517 245 days ago |
71-37436 71 days |
| 29526 |
llllvvuu author:llllvvuu |
feat: `Multiset.map f` identifies `f` up to permutation |
Motivation: Reason about `Fintype`-indexed families via `Multiset` equality.
Example use case 1:
```lean
theorem Matrix.IsHermitian.cfc_eigenvalues {d : Type*} [Fintype d] [DecidableEq d]
{M : Matrix d d 𝕜} (hM : M.IsHermitian) (f : ℝ → ℝ)
(hcfc : Matrix.IsHermitian (cfc f M) := cfc_predicate f M) :
∃ (e : d ≃ d), hcfc.eigenvalues = f ∘ hM.eigenvalues ∘ e := by
have := hcfc.roots_charpoly_eq_eigenvalues.symm
rw [hM.charpoly_cfc_eq f, Polynomial.roots_prod] at this; swap
· simp [Finset.prod_ne_zero_iff, Polynomial.X_sub_C_ne_zero]
simp_rw [Polynomial.roots_X_sub_C, Multiset.bind_singleton] at this
have he := (Multiset.compTriple_equivOfMapUnivEq this).comp_eq
simp_rw [← Function.comp_def RCLike.ofReal, ← Function.comp_def f, Function.comp_assoc] at he
exact ⟨_, RCLike.ofReal_injective.comp_left he.symm⟩
```
Example use case 2 (on top of https://github.com/leanprover-community/mathlib4/pull/29610):
```lean
theorem LinearMap.Eigenbasis.μ_equiv {ι ι' R G : Type*} [Fintype ι] [Fintype ι']
[CommRing R] [IsDomain R] [AddCommGroup G] [Module R G] [Module.Free R G] [Module.Finite R G]
{f : Module.End R G} (B₁ : f.Eigenbasis ι) (B₂ : f.Eigenbasis ι') :
∃ e : ι ≃ ι', B₁.μ = B₂.μ ∘ e := by
classical
have := congr(Polynomial.roots $(B₁.charpoly_eq.symm.trans B₂.charpoly_eq))
rw [Polynomial.roots_prod, Polynomial.roots_prod] at this; rotate_left
· simp [Finset.prod_ne_zero_iff, Polynomial.X_sub_C_ne_zero]
· simp [Finset.prod_ne_zero_iff, Polynomial.X_sub_C_ne_zero]
simp_rw [Polynomial.roots_X_sub_C, Multiset.bind_singleton] at this
exact ⟨Multiset.equivOfMapUnivEq this, (Multiset.compTriple_equivOfMapUnivEq this).comp_eq.symm⟩
```
Co-authored-by: Aristotle Harmonic <aristotle-harmonic@harmonic.fun>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
|
35/0 |
Mathlib/Data/Multiset/Fintype.lean |
1 |
9 |
['Ruben-VandeVelde', 'github-actions', 'llllvvuu', 'mathlib4-merge-conflict-bot', 'vihdzp', 'wwylele'] |
pechersky assignee:pechersky |
245-24478 8 months ago |
245-24479 245 days ago |
69-23034 69 days |
| 29947 |
JaafarTanoukhi author:JaafarTanoukhi |
feat(Combinatorics/Digraph): Maps |
Ported `SimpleGraph/Maps.lean` to `Digraph/Maps.lean` for future PRs related to issue #[26771](https://github.com/leanprover-community/mathlib4/issues/26771)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-combinatorics
new-contributor
|
476/0 |
Mathlib.lean,Mathlib/Combinatorics/Digraph/Maps.lean |
2 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
awainverse assignee:awainverse |
245-23882 8 months ago |
245-23883 245 days ago |
54-85998 54 days |
| 31356 |
adomani author:adomani |
feat: add inspect-like functions |
Produces a tree-like formatting for `Syntax`, `Expr` and `InfoTree`. Especially for the `InfoTree`s, there are *many* parts of it that do not get printed.
For instance, this is how the `InfoTree`s of `set_option linter.missingDocs true` get printed:
```lean
inspectIT
set_option linter.missingDocs true
/-
commandCtx
|-Info.ofCommandInfo: Lean.Elab.Command.elabSetOption, 'set_option…gDocs true'
| |-Info.ofCompletionInfo.CompletionInfo.option 'set_option…issingDocs'
| |-Info.ofOptionInfo: linter.missingDocs, Linter.linter.missingDocs
-/
```
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
|
720/0 |
Mathlib.lean,Mathlib/Util/Inspect.lean,MathlibTest/Inspect.lean |
3 |
3 |
['github-actions', 'mathlib4-merge-conflict-bot', 'plp127'] |
kim-em assignee:kim-em |
245-18903 8 months ago |
245-18904 245 days ago |
11-62509 11 days |
| 6993 |
jjaassoonn author:jjaassoonn |
feat: lemmas about `AddMonoidAlgebra.{divOf, modOf}` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [x] depends on: #7582
- [x] depends on: #8975
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
147/3 |
Mathlib/Algebra/MonoidAlgebra/Division.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Data/MvPolynomial/Basic.lean,Mathlib/Data/MvPolynomial/CommRing.lean,Mathlib/Data/MvPolynomial/Division.lean |
5 |
42 |
['YaelDillies', 'alreadydone', 'digama0', 'eric-wieser', 'github-actions', 'jjaassoonn'] |
nobody |
244-84227 8 months ago |
915-2580 915 days ago |
103-330 103 days |
| 9339 |
FMLJohn author:FMLJohn |
feat(RingTheory/GradedAlgebra/HomogeneousIdeal): given a finitely generated homogeneous ideal of a graded semiring, construct a finite spanning set for the ideal which only contains homogeneous elements |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [ ] depends on: #8187
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-ring-theory
|
402/4 |
Mathlib.lean,Mathlib/Algebra/DirectSum/Internal.lean,Mathlib/Algebra/GradedMonoid.lean,Mathlib/Algebra/Module/GradeZeroModule.lean,Mathlib/RingTheory/Finiteness.lean,Mathlib/RingTheory/GradedAlgebra/Basic.lean,Mathlib/RingTheory/GradedAlgebra/HomogeneousIdeal.lean,Mathlib/RingTheory/GradedAlgebra/Noetherian.lean |
8 |
11 |
['FMLJohn', 'github-actions', 'jjaassoonn'] |
nobody |
244-84180 8 months ago |
929-2758 929 days ago |
6-63597 6 days |
| 10349 |
Shamrock-Frost author:Shamrock-Frost |
refactor(CategoryTheory/MorphismProperty): some clean-ups |
We make explicit some of the galois connections/closure operators in the existing MorphismProperty file, rewrite some proofs to take advantage of these structures, and change map/inverseImage by (1) swapping their argument order, for consistency with Set.range and Set.preimage and (2) making "map" perform the strict, evil map while "essMap" (previously called map) forms the closure of the image under isomorphisms. Finally we add `IsMultiplicative` instances for isos/epis/monos, with an eye towards constructing the wide subcategory on these classes of maps.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #10347
- [x] depends on: #10348
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-category-theory
|
474/318 |
Mathlib/CategoryTheory/Localization/Composition.lean,Mathlib/CategoryTheory/Localization/LocalizerMorphism.lean,Mathlib/CategoryTheory/MorphismProperty.lean,Mathlib/Data/Set/Lattice.lean,Mathlib/Order/Closure.lean,Mathlib/Order/Hom/Basic.lean,Mathlib/Order/Hom/CompleteLattice.lean,Mathlib/Order/RelIso/Basic.lean |
8 |
1 |
[] |
nobody |
244-84138 8 months ago |
895-52882 895 days ago |
0-418 6 minutes |
| 26890 |
robin-carlier author:robin-carlier |
feat(CategoryTheory/Monoidal/DayConvolution): more API for `DayFunctor` |
We provide some lemmas that helps characterizing the monoidal structure on `DayFunctor`, they are special cases of the lemmas for `LawfulDayConvolutionMonoidalCategoryStruct`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #26824
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-category-theory
|
1372/19 |
Mathlib.lean,Mathlib/CategoryTheory/Functor/KanExtension/Basic.lean,Mathlib/CategoryTheory/Monoidal/DayConvolution.lean,Mathlib/CategoryTheory/Monoidal/DayConvolution/DayFunctor.lean |
4 |
5 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
244-83530 8 months ago |
379-22139 379 days ago |
0-517 8 minutes |
| 24016 |
plp127 author:plp127 |
feat: fine uniformity |
Adds the fine uniformity, and proves some properties.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #24096 for showing the induced topology is equal on completely regular spaces
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
|
283/0 |
Mathlib.lean,Mathlib/Topology/UniformSpace/FineUniformity.lean,Mathlib/Topology/UniformSpace/Uniformizable.lean |
3 |
3 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
239-43897 7 months ago |
461-52647 461 days ago |
2-85309 2 days |
| 26912 |
pechersky author:pechersky |
chore(Algebra/Ring/Subring): simp tag `Subring.smul_def` |
s-multiplying by a subtype is easiest to manipulate when both terms are in the ambient type. Many places that had to use the _def lemma for a rewrite, or to include it in a simp set, no longer have to.
Ported from #25308
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
I found this being not-simp frustrating when talking about submodules over a valuation subring. |
merge-conflict
t-algebra
label:t-algebra$ |
67/66 |
Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Field/Subfield/Basic.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Group/Submonoid/MulAction.lean,Mathlib/Algebra/Module/LocalizedModule/Basic.lean,Mathlib/Algebra/Module/LocalizedModule/Exact.lean,Mathlib/Algebra/Module/LocalizedModule/IsLocalization.lean,Mathlib/Algebra/Module/LocalizedModule/Submodule.lean,Mathlib/Algebra/Ring/Periodic.lean,Mathlib/Algebra/Ring/Subring/Basic.lean,Mathlib/Algebra/Ring/Subsemiring/Basic.lean,Mathlib/Analysis/CStarAlgebra/Basic.lean,Mathlib/FieldTheory/KummerExtension.lean,Mathlib/GroupTheory/GroupAction/Defs.lean,Mathlib/GroupTheory/GroupAction/MultiplePrimitivity.lean,Mathlib/GroupTheory/GroupAction/MultipleTransitivity.lean,Mathlib/GroupTheory/GroupAction/SubMulAction/OfFixingSubgroup.lean,Mathlib/GroupTheory/GroupAction/SubMulAction/OfStabilizer.lean,Mathlib/LinearAlgebra/RootSystem/Irreducible.lean,Mathlib/LinearAlgebra/RootSystem/WeylGroup.lean,Mathlib/RingTheory/Etale/Kaehler.lean,Mathlib/RingTheory/Ideal/Over.lean,Mathlib/RingTheory/LocalProperties/Projective.lean,Mathlib/RingTheory/Localization/InvSubmonoid.lean,Mathlib/RingTheory/OreLocalization/Basic.lean |
25 |
26 |
['artie2000', 'eric-wieser', 'github-actions', 'j-loreaux', 'kckennylau', 'leanprover-bot', 'leanprover-radar', 'mathlib4-merge-conflict-bot', 'pechersky', 'wrenna-robson'] |
joelriou assignee:joelriou |
218-56681 7 months ago |
240-6230 240 days ago |
60-67125 60 days |
| 30375 |
sinhp author:sinhp |
feat(CategoryTheory): Basics of Locally Cartesian Closed Categories |
Supersedes https://github.com/leanprover-community/mathlib4/pull/22321
This PR defines locally cartesian closed categories in terms of existence of the pushforward functors (right adjoint to the pullback functor) for all morphisms. We develop basic API and prove the following:
1. Existence of the pushforward functors is equivalent to cartesian closed slices.
2. Any locally cartesian closed category with a terminal object is cartesian closed.
3. The slices of a locally cartesian closed category are locally cartesian closed.
---
- [ ] depends on: #31033
- [ ] depends on: #30373
- [ ] depends on: #31332
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
merge-conflict
|
703/0 |
Mathlib.lean,Mathlib/CategoryTheory/LocallyCartesianClosed/Basic.lean,Mathlib/CategoryTheory/LocallyCartesianClosed/ChosenPullbacksAlong.lean,Mathlib/CategoryTheory/LocallyCartesianClosed/ExponentiableMorphism.lean,Mathlib/CategoryTheory/LocallyCartesianClosed/Sections.lean |
5 |
9 |
['Jlh18', 'github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'sinhp'] |
nobody |
197-78082 6 months ago |
285-84378 285 days ago |
0-2073 34 minutes |
| 29587 |
uniwuni author:uniwuni |
feat(GroupTheory/Finiteness): define finitely generated semigroups |
We define finitely generated semigroups and basics similarly to monoids and groups and prove that semigroups and monoids remain finitely generated when a congruence is quotiented out. This will be important when further developing semigroup theory.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-group-theory
|
259/14 |
Mathlib/Algebra/Group/Submonoid/Defs.lean,Mathlib/GroupTheory/Finiteness.lean |
2 |
4 |
['github-actions', 'mathlib4-merge-conflict-bot', 'plp127', 'uniwuni'] |
dupuisf assignee:dupuisf |
185-12702 6 months ago |
287-17606 287 days ago |
25-78230 25 days |
| 29014 |
ShreckYe author:ShreckYe |
feat(Data/List/Scan): some theorems that relate `scanl` with `foldl` |
I am not sure which is the best form of `getElem_scanl_eq_foldl_take` here, so I added several alternative forms. Feel free to remove any of them if necessary. |
merge-conflict
t-data
|
35/0 |
Mathlib/Data/List/Scan.lean |
1 |
15 |
['ShreckYe', 'github-actions', 'mathlib4-merge-conflict-bot', 'themathqueen', 'vlad902'] |
pechersky assignee:pechersky |
180-78326 5 months ago |
254-43371 254 days ago |
74-62390 74 days |
| 9820 |
jjaassoonn author:jjaassoonn |
feat(RingTheory/GradedAlgebra/HomogeneousIdeal): generalize to homogeneous submodule |
The definitions, constructions and theorems in `HomogeneousIdeal.lean` are generalized to a homogeneous submodules.
So say $R$ is a ring and $M \cong \bigoplus_{i} M_i$ is an $R$-module. Then a homogeneous $R$-submodule of $M$ is an $R$-submodule $N$ such that for all $i$ and $n \in N$, $n_i \in N$. Note that this notion doesn't actually require $R$ to be graded and $M$ is a graded module. But for more interesting lemmas, we do need that $M$ is graded $R$-module. We bake the fact $R$ is graded into the definition of homogeneous submodule, otherwise, `CompleteLattice HomogeneousSubmodule` cannot find the order of synthesis (the proof depends on that $R$ is graded)
All definitions/constructions/theorems have a copy for ideals as well, this is to make sure dot notation still works.
The motivation of this generalization is graded quotient module
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on:#18728
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-ring-theory
|
516/185 |
Mathlib/Algebra/Module/GradedModule.lean,Mathlib/AlgebraicGeometry/ProjectiveSpectrum/Scheme.lean,Mathlib/AlgebraicGeometry/ProjectiveSpectrum/Topology.lean,Mathlib/RingTheory/GradedAlgebra/Homogeneous/Ideal.lean,Mathlib/RingTheory/GradedAlgebra/Homogeneous/Submodule.lean,Mathlib/RingTheory/GradedAlgebra/Radical.lean,scripts/nolints_prime_decls.txt |
7 |
3 |
['github-actions', 'leanprover-community-bot-assistant'] |
nobody |
163-18355 5 months ago |
382-41596 382 days ago |
52-60628 52 days |
| 34931 |
eric-wieser author:eric-wieser |
perf: make TensorProduct.lift irreducible with a unification hint |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
merge-conflict
label:t-algebra$ |
6/2 |
Mathlib/LinearAlgebra/TensorProduct/Basic.lean |
1 |
7 |
['eric-wieser', 'github-actions', 'leanprover-radar', 'mathlib-merge-conflicts'] |
erdOne assignee:erdOne |
159-72775 5 months ago |
159-72776 159 days ago |
5-66655 5 days |
| 33020 |
FormulaRabbit81 author:FormulaRabbit81 |
chore(Topology): Deprecate file |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #30851 deprecation
[](https://gitpod.io/from-referrer/)
|
t-topology
large-import
merge-conflict
|
82/49 |
Mathlib/Topology/Compactness/HilbertCubeEmbedding.lean,Mathlib/Topology/MetricSpace/HausdorffAlexandroff.lean,Mathlib/Topology/MetricSpace/PiNat.lean |
3 |
3 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
157-49386 5 months ago |
216-36775 216 days ago |
0-14835 4 hours |
| 33281 |
michelsol author:michelsol |
feat(Analysis/SpecialFunctions/Integrals): integral of 1/sqrt(1-x^2) and its integrability. |
Add the integral of the derivative of arcsin and its integrability.
---
- [ ] depends on: #33280
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
merge-conflict
t-analysis
|
59/0 |
Mathlib/Analysis/SpecialFunctions/Integrability/Basic.lean,Mathlib/Analysis/SpecialFunctions/Integrals/Basic.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/FundThmCalculus.lean |
3 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot'] |
nobody |
157-18180 5 months ago |
208-72405 208 days ago |
0-2872 47 minutes |
| 34156 |
zcyemi author:zcyemi |
feat(Analysis/Convex/Between): add lemmas on convex combination of mem simplex interior |
---
I add three lemmas of convex combinations preserving membership in the interior of a simplex.
And also open a zulip thread [#mathlib4 > Best place for convex combination and simplex interior](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Best.20place.20for.20convex.20combination.20and.20simplex.20interior/with/568558406)
deps:
- [ ] depends on: #33852 |
t-analysis
merge-conflict
|
170/0 |
Mathlib/Analysis/Convex/Between.lean,Mathlib/LinearAlgebra/AffineSpace/Independent.lean |
2 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
156-80497 5 months ago |
156-80497 156 days ago |
0-2935 48 minutes |
| 25981 |
Multramate author:Multramate |
feat(GroupTheory/GroupAction/Basic): define homomorphisms of fixed subgroups induced by homomorphisms of groups |
This PR continues the work from #10126.
Original PR: https://github.com/leanprover-community/mathlib4/pull/10126 |
t-group-theory
large-import
merge-conflict
|
218/144 |
Mathlib/Algebra/Group/Subgroup/Basic.lean,Mathlib/Algebra/Group/Subgroup/Ker.lean,Mathlib/Algebra/Group/Submonoid/Operations.lean,Mathlib/Algebra/Ring/Action/Submonoid.lean,Mathlib/GroupTheory/FiniteAbelian/Duality.lean,Mathlib/GroupTheory/GroupAction/Defs.lean,Mathlib/GroupTheory/MonoidLocalization/Basic.lean,Mathlib/GroupTheory/MonoidLocalization/Maps.lean,Mathlib/GroupTheory/MonoidLocalization/MonoidWithZero.lean,Mathlib/GroupTheory/PGroup.lean,Mathlib/GroupTheory/QuotientGroup/Basic.lean,Mathlib/GroupTheory/Transfer.lean,Mathlib/LinearAlgebra/RootSystem/WeylGroup.lean,Mathlib/NumberTheory/NumberField/CMField.lean,Mathlib/NumberTheory/NumberField/Ideal/Basic.lean,Mathlib/RingTheory/Localization/Defs.lean |
16 |
8 |
['copilot-pull-request-reviewer', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
154-54624 5 months ago |
154-54624 154 days ago |
4-79090 4 days |
| 33795 |
alreadydone author:alreadydone |
feat(Topology/Sheaves): LocalPredicate prerequisite for étalé spaces |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
merge-conflict
|
418/143 |
Mathlib/AlgebraicGeometry/ProjectiveSpectrum/StructureSheaf.lean,Mathlib/Geometry/Manifold/Sheaf/Smooth.lean,Mathlib/Logic/Equiv/Basic.lean,Mathlib/Topology/Sheaves/LocalPredicate.lean,Mathlib/Topology/Sheaves/Sheafify.lean,Mathlib/Topology/Sheaves/Stalks.lean |
6 |
12 |
['adamtopaz', 'alreadydone', 'dagurtomas', 'github-actions', 'mathlib-merge-conflicts'] |
adamtopaz assignee:adamtopaz |
154-32258 5 months ago |
154-32259 154 days ago |
34-16498 34 days |
| 34674 |
Citronhat author:Citronhat |
feat(Algebra/Order/Ring): replace ENNReal lemmas with WithTop versions |
* Add `WithTop` versions of basic multiplicative order lemmas.
* Use the new `WithTop` lemmas to replace `ENNReal` proofs and address six TODOs.
* Fix a typo in the `pos_of_ne_zero` alias name. |
new-contributor
t-algebra
merge-conflict
label:t-algebra$ |
46/15 |
Mathlib/Algebra/Order/Monoid/Canonical/Defs.lean,Mathlib/Algebra/Order/Ring/WithTop.lean,Mathlib/Data/ENNReal/Operations.lean |
3 |
5 |
['Citronhat', 'Ruben-VandeVelde', 'github-actions', 'mathlib-merge-conflicts'] |
Ruben-VandeVelde assignee:Ruben-VandeVelde |
154-12128 5 months ago |
154-12129 154 days ago |
17-1225 17 days |
| 33746 |
ster-oc author:ster-oc |
feat(Algebra/Module/ZLattice): align `ZSpan.floor` to `Int.floor` API |
This PR adds some of the existent lemmas about `Int.floor`, `Int.ceil` and `Int.fract` to the `ZSpan` namespace.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
merge-conflict
label:t-algebra$ |
353/145 |
Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/Order/Floor/Ring.lean,Mathlib/Topology/Algebra/Order/Floor.lean |
3 |
8 |
['github-actions', 'joelriou', 'mathlib-merge-conflicts', 'ster-oc'] |
joelriou assignee:joelriou |
149-29026 4 months ago |
149-29026 149 days ago |
30-23357 30 days |
| 33791 |
PhoenixIra author:PhoenixIra |
feat: Generalization of FixedPointApproximants to CompletePartialOrder |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This PR provides a generalization of FixedPointApproximants to CompletePartialOrder. Not every theorem can be generalized, as sometimes we require additional conditions (namely `x ≤ f x`) in order to guarantee that the set is directed and thus the supremum is well-defined. This is not necessary in a CompleteLattice.
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
merge-conflict
|
223/100 |
Mathlib/Order/CompletePartialOrder.lean,Mathlib/SetTheory/Ordinal/FixedPointApproximants.lean |
2 |
21 |
['PhoenixIra', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
PhoenixIra and vihdzp assignee:PhoenixIra assignee:vihdzp |
144-65760 4 months ago |
144-65760 144 days ago |
38-12430 38 days |
| 26942 |
pechersky author:pechersky |
feat(RingTheory/Valuation/ValueGroupIso): isomorphism of value groups when compatible |
and also to the ValuativeRel's value group
by request from comment in
https://github.com/leanprover-community/mathlib4/pull/26754#issuecomment-3051770901
- [ ] depends on: #26588
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [x] depends on: #26939
- [x] depends on: #26940
- [x] depends on: #26941 |
merge-conflict
t-ring-theory
t-order
|
299/3 |
Mathlib.lean,Mathlib/Algebra/GroupWithZero/Range.lean,Mathlib/Algebra/Order/GroupWithZero/Range.lean,Mathlib/Algebra/Order/GroupWithZero/WithZero.lean,Mathlib/Algebra/Order/Monoid/WithTop.lean,Mathlib/RingTheory/Valuation/ValueGroupIso.lean |
6 |
10 |
['faenuccio', 'github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'pechersky'] |
faenuccio assignee:faenuccio |
142-9941 4 months ago |
341-81751 341 days ago |
10-67838 10 days |
| 14712 |
astrainfinita author:astrainfinita |
perf: change instance priority and order about `OfNat` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
slow-typeclass-synthesis
t-algebra
label:t-algebra$ |
49/20 |
Mathlib/Algebra/Group/Nat.lean,Mathlib/Algebra/Group/ZeroOne.lean,Mathlib/Algebra/Homology/Embedding/Basic.lean,Mathlib/Algebra/Tropical/Basic.lean,Mathlib/Data/BitVec.lean,Mathlib/Data/Nat/Cast/Defs.lean,Mathlib/Data/Rat/Defs.lean,Mathlib/Data/UInt.lean,Mathlib/NumberTheory/ArithmeticFunction.lean |
9 |
26 |
['MichaelStollBayreuth', 'astrainfinita', 'eric-wieser', 'fpvandoorn', 'github-actions', 'j-loreaux', 'leanprover-bot', 'mathlib-bors'] |
nobody |
138-9046 4 months ago |
712-73616 712 days ago |
20-15089 20 days |
| 17627 |
hrmacbeth author:hrmacbeth |
feat: universal properties of vector bundle constructions |
Characterizations for the smoothness of maps into the total spaces of (1) the direct sum of two vector bundles; (2) the pullback of a vector bundle.
This gap in the library was exposed by #17358.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #22804
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-differential-geometry
|
311/9 |
Mathlib/Data/Bundle.lean,Mathlib/Geometry/Manifold/VectorBundle/Basic.lean,Mathlib/Geometry/Manifold/VectorBundle/Pullback.lean,Mathlib/Topology/FiberBundle/Constructions.lean |
4 |
26 |
['PatrickMassot', 'fpvandoorn', 'github-actions', 'grunweg', 'hrmacbeth', 'j-loreaux', 'leanprover-community-bot-assistant', 'mathlib-bors', 'mathlib4-dependent-issues-bot', 'sgouezel'] |
grunweg assignee:grunweg |
138-9034 4 months ago |
398-8773 398 days ago |
91-68315 91 days |
| 27534 |
PierreQuinton author:PierreQuinton |
feat: a typeclass for `sSup`/`sInf` to be lawful |
Adds lawful infima and suprema type classes.
A preorder with lawful suprema: whenever a set has a least upper bound, `sSup` returns a least upper bound for that set.
A preorder with lawful infima: whenever a set has a greatest lower bound, `sInf` returns a greastest lower bound for that set.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-order
|
121/8 |
Mathlib.lean,Mathlib/Order/CompleteLattice/Defs.lean,Mathlib/Order/LawfulSupInf.lean |
3 |
26 |
['PierreQuinton', 'YaelDillies', 'github-actions', 'mathlib4-merge-conflict-bot', 'plp127', 'vihdzp'] |
nobody |
129-80137 4 months ago |
245-24812 245 days ago |
114-38193 114 days |
| 35042 |
JovanGerb author:JovanGerb |
chore: remove `meta` form `import Mathlib.Tactic...` |
This PR cleans up some imports of the form `import Mathlib.Tactic...`, by either removing them entirely, or removing the `meta` keyword. It should never be necessary to `meta import` a file from `Mathlib.Tactic`, because the relevant definitions should already have been marked as `meta`.
The motivation is to reduce the amount of files that are `meta` imported when writing e.g. `import Mathlib`, hence reducing the amount of stuff that needs to be loaded. There are more other `meta import`s that need to be removed, but this PR is a good start.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import
merge-conflict
|
61/142 |
Mathlib/Algebra/BigOperators/Group/Finset/Defs.lean,Mathlib/Algebra/FreeMonoid/Basic.lean,Mathlib/Algebra/Group/Action/Hom.lean,Mathlib/Algebra/Order/Group/Unbundled/Abs.lean,Mathlib/CategoryTheory/Functor/Basic.lean,Mathlib/Data/List/ChainOfFn.lean,Mathlib/Dynamics/OmegaLimit.lean,Mathlib/GroupTheory/GroupAction/Defs.lean,Mathlib/GroupTheory/GroupAction/DomAct/Basic.lean,Mathlib/Tactic/Algebraize.lean,Mathlib/Tactic/ApplyFun.lean,Mathlib/Tactic/ArithMult.lean,Mathlib/Tactic/Bound.lean,Mathlib/Tactic/CategoryTheory/Bicategory/Datatypes.lean,Mathlib/Tactic/CategoryTheory/Bicategory/Normalize.lean,Mathlib/Tactic/CategoryTheory/Bicategory/PureCoherence.lean,Mathlib/Tactic/CategoryTheory/CheckCompositions.lean,Mathlib/Tactic/CategoryTheory/Coherence/Basic.lean,Mathlib/Tactic/CategoryTheory/Coherence/Normalize.lean,Mathlib/Tactic/CategoryTheory/Coherence/PureCoherence.lean,Mathlib/Tactic/CategoryTheory/Elementwise.lean,Mathlib/Tactic/CategoryTheory/Monoidal/Datatypes.lean,Mathlib/Tactic/CategoryTheory/Monoidal/Normalize.lean,Mathlib/Tactic/CategoryTheory/Monoidal/PureCoherence.lean,Mathlib/Tactic/CategoryTheory/ToApp.lean,Mathlib/Tactic/Choose.lean,Mathlib/Tactic/DeclarationNames.lean,Mathlib/Tactic/DefEqTransformations.lean,Mathlib/Tactic/DeriveCountable.lean,Mathlib/Tactic/DeriveFintype.lean,Mathlib/Tactic/DeriveTraversable.lean,Mathlib/Tactic/ENatToNat.lean,Mathlib/Tactic/Explode.lean,Mathlib/Tactic/Explode/Pretty.lean,Mathlib/Tactic/FinCases.lean,Mathlib/Tactic/FunProp.lean,Mathlib/Tactic/FunProp/Attr.lean,Mathlib/Tactic/FunProp/Core.lean,Mathlib/Tactic/FunProp/FunctionData.lean,Mathlib/Tactic/FunProp/Theorems.lean,Mathlib/Tactic/FunProp/Types.lean,Mathlib/Tactic/GCongr/Core.lean,Mathlib/Tactic/GRewrite/Elab.lean,Mathlib/Tactic/Group.lean,Mathlib/Tactic/IrreducibleDef.lean,Mathlib/Tactic/Lift.lean,Mathlib/Tactic/Linarith.lean,Mathlib/Tactic/Linarith/Lemmas.lean,Mathlib/Tactic/Linarith/Oracle/FourierMotzkin.lean,Mathlib/Tactic/Linarith/Oracle/SimplexAlgorithm.lean,Mathlib/Tactic/Linarith/Oracle/SimplexAlgorithm/Gauss.lean,Mathlib/Tactic/Linarith/Oracle/SimplexAlgorithm/SimplexAlgorithm.lean,Mathlib/Tactic/Linarith/Preprocessing.lean,Mathlib/Tactic/Linarith/Verification.lean,Mathlib/Tactic/LinearCombination/Lemmas.lean,Mathlib/Tactic/Linter/DeprecatedSyntaxLinter.lean,Mathlib/Tactic/Linter/DocPrime.lean,Mathlib/Tactic/Linter/DocString.lean,Mathlib/Tactic/Linter/EmptyLine.lean,Mathlib/Tactic/Linter/FlexibleLinter.lean,Mathlib/Tactic/Linter/GlobalAttributeIn.lean,Mathlib/Tactic/Linter/HashCommandLinter.lean,Mathlib/Tactic/Linter/Multigoal.lean,Mathlib/Tactic/Linter/OldObtain.lean,Mathlib/Tactic/Linter/Style.lean,Mathlib/Tactic/Linter/TextBased.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean,Mathlib/Tactic/Linter/UnusedTactic.lean,Mathlib/Tactic/Linter/UnusedTacticExtension.lean,Mathlib/Tactic/MinImports.lean,Mathlib/Tactic/MoveAdd.lean,Mathlib/Tactic/Nontriviality/Core.lean,Mathlib/Tactic/NormNum/DivMod.lean,Mathlib/Tactic/NormNum/Ineq.lean,Mathlib/Tactic/NormNum/Prime.lean,Mathlib/Tactic/Order.lean,Mathlib/Tactic/Order/CollectFacts.lean,Mathlib/Tactic/Order/Graph/Tarjan.lean,Mathlib/Tactic/PNatToNat.lean,Mathlib/Tactic/Peel.lean,Mathlib/Tactic/ProdAssoc.lean,Mathlib/Tactic/ProxyType.lean,Mathlib/Tactic/Push.lean,Mathlib/Tactic/Qify.lean,Mathlib/Tactic/RSuffices.lean,Mathlib/Tactic/Ring/Basic.lean,Mathlib/Tactic/Ring/Common.lean,Mathlib/Tactic/Ring/Compare.lean,Mathlib/Tactic/Ring/PNat.lean,Mathlib/Tactic/Simproc/Divisors.lean,Mathlib/Tactic/Simproc/FinsetInterval.lean,Mathlib/Tactic/Simps/Basic.lean,Mathlib/Tactic/Subsingleton.lean,Mathlib/Tactic/TacticAnalysis/Declarations.lean,Mathlib/Tactic/TautoSet.lean,Mathlib/Tactic/Translate/Core.lean,Mathlib/Tactic/Translate/TagUnfoldBoundary.lean,Mathlib/Tactic/Widget/Calc.lean,Mathlib/Tactic/Widget/CommDiag.lean,Mathlib/Tactic/Widget/CongrM.lean |
107 |
9 |
['JovanGerb', 'dupuisf', 'github-actions', 'leanprover-radar', 'mathlib-merge-conflicts'] |
robin-carlier assignee:robin-carlier |
128-22282 4 months ago |
128-22283 128 days ago |
26-74403 26 days |
| 32918 |
michelsol author:michelsol |
feat: define `supEdist` and `supDist` |
Create a new file Topology.MetricSpace.SupDistance and define the supremal distance in (extended) metric spaces. The defined `supEdist` and `supDist` will have similar theory to the already existing `infEdist` and `infDist`. The motivation is to be able to define the radius of a minimal bounding sphere as the infimum of the supDist later.
[zulip discussion here](https://leanprover.zulipchat.com/#narrow/channel/116395-maths/topic/Formalizing.20Jung's.20theorem.20and.20minimal.20bounding.20spheres) |
t-topology
new-contributor
merge-conflict
|
75/0 |
Mathlib.lean,Mathlib/Topology/MetricSpace/SupDistance.lean |
2 |
5 |
['github-actions', 'mathlib4-merge-conflict-bot', 'michelsol', 'urkud'] |
nobody |
123-2104 4 months ago |
197-67064 197 days ago |
21-3598 21 days |
| 31595 |
astrainfinita author:astrainfinita |
chore: redefine `Ideal.IsPrime` |
Redefine `Ideal.IsPrime` to make it correct for non-commutative cases
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
merge-conflict
label:t-algebra$ |
333/100 |
Mathlib/Algebra/Order/Ring/Ordering/Defs.lean,Mathlib/RingTheory/DedekindDomain/Ideal/Lemmas.lean,Mathlib/RingTheory/GradedAlgebra/Radical.lean,Mathlib/RingTheory/Ideal/AssociatedPrime/Basic.lean,Mathlib/RingTheory/Ideal/Maps.lean,Mathlib/RingTheory/Ideal/Maximal.lean,Mathlib/RingTheory/Ideal/MinimalPrime/Noetherian.lean,Mathlib/RingTheory/Ideal/Oka.lean,Mathlib/RingTheory/Ideal/Operations.lean,Mathlib/RingTheory/Ideal/Over.lean,Mathlib/RingTheory/Ideal/Pointwise.lean,Mathlib/RingTheory/Ideal/Prime.lean,Mathlib/RingTheory/Ideal/Prod.lean,Mathlib/RingTheory/Ideal/Quotient/Basic.lean,Mathlib/RingTheory/Ideal/Quotient/Operations.lean,Mathlib/RingTheory/IsPrimary.lean,Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/Localization/Ideal.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/PrincipalIdealDomain.lean,Mathlib/RingTheory/Spectrum/Prime/Topology.lean,Mathlib/RingTheory/Valuation/Basic.lean |
22 |
33 |
['alreadydone', 'artie2000', 'astrainfinita', 'erdOne', 'github-actions', 'leanprover-bot', 'leanprover-radar', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
kim-em assignee:kim-em |
115-35243 3 months ago |
115-35244 115 days ago |
59-67698 59 days |
| 11964 |
adamtopaz author:adamtopaz |
feat: The functor of points of a scheme |
We construct the functor of points functor, and prove that it's full and faithful.
---
- [x] depends on: #11947
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebraic-geometry
t-category-theory
|
210/0 |
Mathlib.lean,Mathlib/AlgebraicGeometry/FunctorOfPoints.lean,Mathlib/AlgebraicGeometry/OpenImmersion.lean |
3 |
4 |
['github-actions', 'grunweg'] |
nobody |
110-13477 3 months ago |
830-83263 830 days ago |
0-1223 20 minutes |
| 33434 |
astrainfinita author:astrainfinita |
chore: redefine `Finsupp.indicator` using `Finsupp.onFinset` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
merge-conflict
|
6/17 |
Mathlib/Data/Finsupp/Indicator.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
103-66775 3 months ago |
103-66776 103 days ago |
5-59263 5 days |
| 6777 |
adomani author:adomani |
chore(Co*variantClass): replace eta-expanded (· * ·), (· + ·), (· ≤ ·), (· < ·) |
Replace `CovariantClass X X (· * ·) (· ≤ ·)` with -> `CovariantClass X X HMul.hMul LE.le` and similarly for `HAdd`, `LT`, `Contravariant`.
This PR is inspired by [Issue #6646](https://github.com/leanprover-community/mathlib4/issues/6646) and, more specifically, [this comment](https://github.com/leanprover-community/mathlib4/issues/6646#issuecomment-1692792066).
Note that https://github.com/leanprover/lean4/pull/2267 would make this unnecessary
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
```bash
# First sed command:
# the first captured pattern is `Co*variantClass <type> <type> `
# the second captured pattern is `<type>`
# the third captured pattern is `+` or `*`
# the fourth captured pattern is `<` or `≤`
# a match for `Co*variantClass <type> <type> (· <op> ·) (· <rel> ·)` becomes
# `Co*variantClass <type> <type> replaceop<op> replaceop<rel>`
# Second sed command: similar to the first, but looks for `(Function.swap (· <op> ·))`
sed -i '
s=\(Co[ntra]*variantClass \(..*\) \2 \)(· *\([+*]\) *·) (· *\([<≤]\) *·)=\1replaceop\3 replaceop\4=g
s=\(Co[ntra]*variantClass \(..*\) \2 \)(\([Functio\.swap ]*\)(· *\([+*]\) *·)) (· *\([<≤]\) *·)=\1(\3replaceop\4) replaceop\5=g
s=replaceop+=HAdd.hAdd=g
s=replaceop\*=HMul.hMul=g
s=replaceop<=LT.lt=g
s=replaceop≤=LE.le=g
s=\(Co[ntra]*variantClass N N\) (· \* ·) r=\1 HMul.hMul r=g
s=\(Co[ntra]*variantClass N N (swap μ)\) (· ≤ ·)=\1 LE.le=g
s=\(Co[ntra]*variantClass N N\) (swap (· \* ·)) r=\1 (swap HMul.hMul) r=g
s=\(CovariantClass (Filter α) (Filter α)\) (· / ·) (· ≤ ·)=\1 HDiv.hDiv LE.le=g
s=\(CovariantClass (Filter α) (Filter α)\) (swap (· / ·)) (· ≤ ·)=\1 (swap HDiv.hDiv) LE.le=g
s=\(Co[ntra]*variantClass .* (fun x y .> . \* .)\) (· ≤ ·)=\1 LE.le=g
s=\(Co[ntra]*variantClass .* (fun x y .> . \* .)\) (· < ·)=\1 LT.lt=g
s=\(Co[ntra]*variantClass [^}]*\) (· ≤ ·)=\1 LE.le=g
s=\(CovariantClass .* (Filter β)\) (· • ·) LE.le=\1 HSMul.hSMul LE.le=g
' $(git ls-files '*.lean')
```
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
703/678 |
Counterexamples/ZeroDivisorsInAddMonoidAlgebras.lean,Mathlib/Algebra/BigOperators/Basic.lean,Mathlib/Algebra/Bounds.lean,Mathlib/Algebra/CovariantAndContravariant.lean,Mathlib/Algebra/DirectSum/Internal.lean,Mathlib/Algebra/Group/UniqueProds.lean,Mathlib/Algebra/GroupPower/Order.lean,Mathlib/Algebra/MonoidAlgebra/Degree.lean,Mathlib/Algebra/Order/Archimedean.lean,Mathlib/Algebra/Order/Group/Abs.lean,Mathlib/Algebra/Order/Group/Defs.lean,Mathlib/Algebra/Order/Group/DenselyOrdered.lean,Mathlib/Algebra/Order/Group/MinMax.lean,Mathlib/Algebra/Order/Group/OrderIso.lean,Mathlib/Algebra/Order/Hom/Monoid.lean,Mathlib/Algebra/Order/Interval.lean,Mathlib/Algebra/Order/Kleene.lean,Mathlib/Algebra/Order/LatticeGroup.lean,Mathlib/Algebra/Order/Module.lean,Mathlib/Algebra/Order/Monoid/Basic.lean,Mathlib/Algebra/Order/Monoid/Cancel/Defs.lean,Mathlib/Algebra/Order/Monoid/Canonical/Defs.lean,Mathlib/Algebra/Order/Monoid/Defs.lean,Mathlib/Algebra/Order/Monoid/Lemmas.lean,Mathlib/Algebra/Order/Monoid/MinMax.lean,Mathlib/Algebra/Order/Monoid/NatCast.lean,Mathlib/Algebra/Order/Monoid/OrderDual.lean,Mathlib/Algebra/Order/Monoid/Prod.lean,Mathlib/Algebra/Order/Monoid/WithTop.lean,Mathlib/Algebra/Order/Monoid/WithZero/Basic.lean,Mathlib/Algebra/Order/Monoid/WithZero/Defs.lean,Mathlib/Algebra/Order/Nonneg/Ring.lean,Mathlib/Algebra/Order/Pointwise.lean,Mathlib/Algebra/Order/Positive/Ring.lean,Mathlib/Algebra/Order/Ring/Canonical.lean,Mathlib/Algebra/Order/Ring/Defs.lean,Mathlib/Algebra/Order/Ring/Lemmas.lean,Mathlib/Algebra/Order/Sub/Basic.lean,Mathlib/Algebra/Order/Sub/Canonical.lean,Mathlib/Algebra/Order/Sub/Defs.lean,Mathlib/Algebra/Order/WithZero.lean,Mathlib/Algebra/Parity.lean,Mathlib/Algebra/Star/Order.lean,Mathlib/Algebra/Tropical/Basic.lean,Mathlib/Analysis/Normed/Order/Lattice.lean,Mathlib/Data/DFinsupp/Lex.lean,Mathlib/Data/DFinsupp/Order.lean,Mathlib/Data/Finset/Fold.lean,Mathlib/Data/Finsupp/Lex.lean,Mathlib/Data/Finsupp/Order.lean,Mathlib/Data/List/BigOperators/Basic.lean,Mathlib/Data/List/BigOperators/Lemmas.lean,Mathlib/Data/Multiset/Basic.lean,Mathlib/Data/Nat/Cast/Order.lean,Mathlib/Data/PNat/Basic.lean,Mathlib/Data/Real/ENNReal.lean,Mathlib/Data/Real/NNReal.lean,Mathlib/Data/Set/Semiring.lean,Mathlib/Data/Sign.lean,Mathlib/MeasureTheory/Function/LpOrder.lean,Mathlib/MeasureTheory/Function/SimpleFuncDenseLp.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/VectorMeasure.lean,Mathlib/Order/ConditionallyCompleteLattice/Group.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/Pointwise.lean,Mathlib/Probability/Martingale/Basic.lean,Mathlib/Probability/Process/Stopping.lean,Mathlib/RingTheory/GradedAlgebra/Basic.lean,Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Game/Basic.lean,Mathlib/SetTheory/Game/PGame.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Basic.lean,Mathlib/SetTheory/Ordinal/NaturalOps.lean,Mathlib/Tactic/GCongr/Core.lean,Mathlib/Tactic/Positivity/Basic.lean,Mathlib/Topology/ContinuousFunction/Algebra.lean,lean-toolchain,test/Recall.lean,test/propose.lean |
81 |
37 |
['adomani', 'alreadydone', 'digama0', 'eric-wieser', 'ericrbg', 'jcommelin', 'leanprover-bot', 'sgouezel', 'vihdzp'] |
nobody |
96-39411 3 months ago |
995-75571 995 days ago |
35-63136 35 days |
| 37530 |
mcdoll author:mcdoll |
fix(Topology/Algebra): fix bad simps and make arguments implicit for `PointwiseConvergenceCLM` |
We delete all `simps` calls in the definitions of operators on `PointwiseConvergenceCLM` and replace them with `apply_apply` lemmas that do not abuse the defeq between `SLₚₜ` and `SL`. This made the linter discover some typeclass duplications, which we remove by restructuring the file.
As a consequence of the new `simp` lemmas, we can remove all `set_option backward.isDefEq.respectTransparency false in` in `Analysis.Distribution.TemperedDistribution`.
Moreover, we make several arguments implicit, which can be inferred in almost all practical situations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
not-ready-to-merge
merge-conflict
|
88/69 |
Mathlib/Analysis/Distribution/TemperedDistribution.lean,Mathlib/Topology/Algebra/Module/Spaces/PointwiseConvergenceCLM.lean |
2 |
5 |
['github-actions', 'jcommelin', 'mathlib-merge-conflicts', 'mcdoll'] |
nobody |
94-28980 3 months ago |
94-28981 94 days ago |
14-59669 14 days |
| 38239 |
vihdzp author:vihdzp |
chore(Order/SuccPred/Limit): reorganize sections |
In an effort to keep the file better organized, we move theorems which use `SuccOrder`/`PredOrder` as an assumption to a new section.
No theorems have been changed.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
merge-conflict
|
95/110 |
Mathlib/Order/SuccPred/Limit.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
91-58557 3 months ago |
91-58558 91 days ago |
2-48556 2 days |
| 37461 |
grunweg author:grunweg |
chore: golf using the field tactic |
---
In the spirit of #31314.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
32/43 |
Counterexamples/NowhereDifferentiable.lean,Mathlib/Analysis/Calculus/Monotone.lean,Mathlib/Analysis/Complex/BorelCaratheodory.lean,Mathlib/Analysis/MeanInequalities.lean,Mathlib/Analysis/Normed/Field/Lemmas.lean,Mathlib/Analysis/SpecialFunctions/Complex/LogBounds.lean,Mathlib/Analysis/SpecialFunctions/Elliptic/Weierstrass.lean,Mathlib/Analysis/SpecialFunctions/Integrals/Basic.lean,Mathlib/InformationTheory/KullbackLeibler/Basic.lean,Mathlib/LinearAlgebra/Lagrange.lean,Mathlib/MeasureTheory/Integral/MeanValue.lean,Mathlib/NumberTheory/ModularForms/Discriminant.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Defs.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/MDifferentiable.lean,Mathlib/NumberTheory/ModularForms/QExpansion.lean,Mathlib/Probability/CentralLimitTheorem.lean,Mathlib/Probability/Distributions/Gaussian/CharFun.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/Hilbert90.lean,Mathlib/RingTheory/PowerSeries/Exp.lean,Mathlib/Topology/UnitInterval.lean |
20 |
5 |
['github-actions', 'grunweg', 'j-loreaux', 'mathlib-merge-conflicts'] |
nobody |
89-58261 2 months ago |
89-58262 89 days ago |
22-59925 22 days |
| 37774 |
weisbrja author:weisbrja |
fix: change variables in `bicompl` to `Sort*` and add missing theorem mentioned in `bicompl` docs |
[#mathlib4 > Why does Mathlib use Type* instead of Sort* in some places?](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Why.20does.20Mathlib.20use.20Type.2A.20instead.20of.20Sort.2A.20in.20some.20places.3F/with/583882342)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-logic
merge-conflict
|
6/1 |
Mathlib/Logic/Function/Basic.lean |
1 |
8 |
['github-actions', 'kbuzzard', 'leanprover-radar', 'mathlib-merge-conflicts', 'weisbrja'] |
nobody |
85-71889 2 months ago |
85-71890 85 days ago |
19-76858 19 days |
| 33478 |
anishrajeev author:anishrajeev |
feat(ModelTheory): define a subset of the topology over complete types |
Define a subset of the Stone Space over a language expanded with countably many constants. Define the proposition to indicate if a language is countable. The subset's density and openness is a future goal to prove (have a branch where it is almost finished), in pursuit of formalizing the proof of the Omitting Types Theorem via properties of Baire spaces.
- [ ] depends on: #32215
- [ ] depends on: #32546 |
t-logic
merge-conflict
new-contributor
|
160/1 |
Mathlib.lean,Mathlib/ModelTheory/Topology/Types.lean,Mathlib/ModelTheory/Types.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean |
4 |
8 |
['NoneMore', 'anishrajeev', 'github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'tb65536'] |
nobody |
83-78814 2 months ago |
191-5955 191 days ago |
10-38484 10 days |
| 36740 |
euprunin author:euprunin |
chore: golf using `grind` |
The goal of this PR is to decrease the number of times lemmas are called explicitly. Any decrease in compilation time is a welcome side effect, although it is not a primary objective.
Trace profiling results (differences <30 ms considered measurement noise):
* `AlgebraicGeometry.Scheme.isBasis_affineOpens`: unchanged 🎉
* `SimpleGraph.Walk.takeUntil_eq_take`: 263 ms before, 180 ms after 🎉
* `SimpleGraph.Walk.dropUntil_eq_drop`: 382 ms before, 261 ms after 🎉
* `Int.image_Ico_emod`: unchanged 🎉
* `Equiv.Perm.ofSubtype_swap_eq`: unchanged 🎉
Profiled using `set_option trace.profiler true in`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
7/33 |
Mathlib/AlgebraicGeometry/AffineScheme.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean,Mathlib/Data/Int/Interval.lean,Mathlib/GroupTheory/Perm/Support.lean |
4 |
8 |
['artie2000', 'chenson2018', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
83-61352 2 months ago |
83-61353 83 days ago |
43-5868 43 days |
| 38329 |
jcommelin author:jcommelin |
chore: tighten down public/exposed API of AlgebraicClosure |
This PR tightens down the API of AlgebraicClosure,
by making few parts of FieldTheory/IsAlgClosed/AlgebraicClosure.lean
public and/or exposed.
We still need to expose the main definition.
It would be great if we can unexpose it in the future.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
merge-conflict
label:t-algebra$ |
73/53 |
Mathlib/Algebra/Lie/TraceForm.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/Differential/Liouville.lean,Mathlib/FieldTheory/IsAlgClosed/AlgebraicClosure.lean,Mathlib/ModelTheory/Algebra/Field/IsAlgClosed.lean,Mathlib/RingTheory/Discriminant.lean,Mathlib/RingTheory/IntegralClosure/IntegralRestrict.lean,Mathlib/RingTheory/Norm/Transitivity.lean,Mathlib/RingTheory/Trace/Basic.lean |
9 |
26 |
['eric-wieser', 'github-actions', 'jcommelin', 'kbuzzard', 'leanprover-radar', 'mathlib-merge-conflicts', 'plp127', 'riccardobrasca'] |
nobody |
83-52725 2 months ago |
83-52726 83 days ago |
7-41851 7 days |
| 36495 |
AlexKontorovich author:AlexKontorovich |
chore(Finset/NatDivisors): refactor `card_divisors_mul` and `sum_divisors_mul` to not rely on `ArithmeticFunction` |
`Nat.Coprime.card_divisors_mul` and `Nat.Coprime.sum_divisors_mul` are moved to not rely on `ArithmeticFunction`. See zulip discussion here: [#mathlib4 > Library design question, e.g.`Nat.Coprime.card_divisors_mul` @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Library.20design.20question.2C.20e.2Eg.2E.60Nat.2ECoprime.2Ecard_divisors_mul.60/near/577769899)
Co-authored-by: Ziyan Wei <zw810@scarletmail.rutgers.edu> and Aayush Rajasekaran <arajasek94@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import
t-number-theory
t-algebra
merge-conflict
label:t-algebra$ |
41/14 |
Mathlib/Algebra/GCDMonoid/Basic.lean,Mathlib/Data/Finset/NatDivisors.lean,Mathlib/NumberTheory/ArithmeticFunction/Misc.lean |
3 |
6 |
['AlexKontorovich', 'arajasek', 'github-actions', 'mathlib-merge-conflicts'] |
riccardobrasca assignee:riccardobrasca |
74-65270 2 months ago |
74-65271 74 days ago |
53-21240 53 days |
| 37553 |
grunweg author:grunweg |
chore: golf using .ne and friends |
ne_of_gt -> .ne'
ne_of_lt -> .ne
le_of_lt -> .le
Drive-by golfs using gcongr and positivity and been split into separate PRs.
---
- [x] depends on: #37462
- [x] depends on: #37715
- [x] depends on: #37554
- [x] depends on: #37845
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
302/321 |
Archive/Imo/Imo1981Q3.lean,Archive/Imo/Imo2011Q3.lean,Archive/Imo/Imo2013Q5.lean,Archive/Imo/Imo2019Q4.lean,Archive/Wiedijk100Theorems/CubingACube.lean,Counterexamples/DiscreteTopologyNonDiscreteUniformity.lean,Counterexamples/NowhereDifferentiable.lean,Counterexamples/TopologistsSineCurve.lean,Mathlib/Algebra/BigOperators/Fin.lean,Mathlib/Algebra/BigOperators/Group/List/Lemmas.lean,Mathlib/Algebra/CharP/Defs.lean,Mathlib/Algebra/Group/Fin/Basic.lean,Mathlib/Algebra/Group/Pointwise/Set/Finite.lean,Mathlib/Algebra/Lie/Nilpotent.lean,Mathlib/Algebra/Module/Torsion/Basic.lean,Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/Module/ZLattice/Covolume.lean,Mathlib/Algebra/Order/Antidiag/Nat.lean,Mathlib/Algebra/Order/Archimedean/Basic.lean,Mathlib/Algebra/Order/Archimedean/Class.lean,Mathlib/Algebra/Order/BigOperators/Group/Multiset.lean,Mathlib/Algebra/Order/BigOperators/GroupWithZero/Finset.lean,Mathlib/Algebra/Order/CauSeq/Basic.lean,Mathlib/Algebra/Order/CauSeq/BigOperators.lean,Mathlib/Algebra/Order/CompleteField.lean,Mathlib/Algebra/Order/Field/Basic.lean,Mathlib/Algebra/Order/GroupWithZero/Range.lean,Mathlib/Algebra/Order/GroupWithZero/Unbundled/Basic.lean,Mathlib/Algebra/Order/Interval/Set/Instances.lean,Mathlib/Algebra/Order/Module/HahnEmbedding.lean,Mathlib/Algebra/Order/Ring/WithTop.lean,Mathlib/Algebra/Order/Round.lean,Mathlib/Algebra/Order/ToIntervalMod.lean,Mathlib/Algebra/Polynomial/DenomsClearable.lean,Mathlib/Algebra/Polynomial/EraseLead.lean,Mathlib/Algebra/Polynomial/Monic.lean,Mathlib/Algebra/QuadraticDiscriminant.lean,Mathlib/AlgebraicGeometry/ProjectiveSpectrum/Proper.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Analytic/Inverse.lean,Mathlib/Analysis/Analytic/OfScalars.lean,Mathlib/Analysis/Analytic/Uniqueness.lean,Mathlib/Analysis/Asymptotics/ExpGrowth.lean,Mathlib/Analysis/Asymptotics/LinearGrowth.lean,Mathlib/Analysis/Asymptotics/SpecificAsymptotics.lean,Mathlib/Analysis/Asymptotics/TVS.lean,Mathlib/Analysis/BoxIntegral/Basic.lean,Mathlib/Analysis/BoxIntegral/Partition/Tagged.lean,Mathlib/Analysis/Calculus/BumpFunction/FiniteDimension.lean,Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/Calculus/ContDiff/FTaylorSeries.lean,Mathlib/Analysis/Calculus/DerivativeTest.lean,Mathlib/Analysis/Calculus/FDeriv/Extend.lean,Mathlib/Analysis/Calculus/FDeriv/Measurable.lean,Mathlib/Analysis/Calculus/IteratedDeriv/Defs.lean,Mathlib/Analysis/Calculus/LHopital.lean,Mathlib/Analysis/Complex/Exponential.lean,Mathlib/Analysis/Complex/Hadamard.lean,Mathlib/Analysis/Complex/OpenMapping.lean,Mathlib/Analysis/Complex/Poisson.lean,Mathlib/Analysis/Complex/Trigonometric.lean,Mathlib/Analysis/Convex/Between.lean,Mathlib/Analysis/Convex/Caratheodory.lean,Mathlib/Analysis/Convex/Combination.lean,Mathlib/Analysis/Convex/Gauge.lean,Mathlib/Analysis/Convex/Radon.lean,Mathlib/Analysis/Convex/SpecificFunctions/Deriv.lean,Mathlib/Analysis/Convolution.lean,Mathlib/Analysis/InnerProductSpace/Subspace.lean,Mathlib/Analysis/LocallyConvex/WithSeminorms.lean,Mathlib/Analysis/MeanInequalities.lean,Mathlib/Analysis/MeanInequalitiesPow.lean,Mathlib/Analysis/MellinInversion.lean,Mathlib/Analysis/MellinTransform.lean,Mathlib/Analysis/Normed/Field/Approximation.lean,Mathlib/Analysis/Normed/Module/FiniteDimension.lean,Mathlib/Analysis/Normed/Operator/ContinuousAlgEquiv.lean,Mathlib/Analysis/Normed/Ring/Units.lean,Mathlib/Analysis/Normed/Unbundled/IsPowMulFaithful.lean,Mathlib/Analysis/Normed/Unbundled/SmoothingSeminorm.lean,Mathlib/Analysis/Normed/Unbundled/SpectralNorm.lean,Mathlib/Analysis/Oscillation.lean,Mathlib/Analysis/Real/Hyperreal.lean,Mathlib/Analysis/Real/Pi/Bounds.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Rpow/IntegralRepresentation.lean,Mathlib/Analysis/SpecialFunctions/Log/Basic.lean,Mathlib/Analysis/SpecialFunctions/PolarCoord.lean,Mathlib/Analysis/SpecialFunctions/Pow/NNReal.lean,Mathlib/Analysis/SpecialFunctions/Pow/Real.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Basic.lean,Mathlib/Data/EReal/Inv.lean,Mathlib/Data/Finset/Image.lean,Mathlib/Data/Int/Interval.lean,Mathlib/Data/Int/ModEq.lean,Mathlib/Data/Nat/Bitwise.lean,Mathlib/Data/Nat/Lattice.lean,Mathlib/Data/Nat/Log.lean,Mathlib/Data/Nat/Multiplicity.lean,Mathlib/Data/Real/ConjExponents.lean,Mathlib/Dynamics/Circle/RotationNumber/TranslationNumber.lean |
114 |
7 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
69-52241 2 months ago |
69-52241 69 days ago |
13-66876 13 days |
| 39229 |
grunweg author:grunweg |
dev: towards `fun_prop` on manifolds |
---
- [ ] depends on: #39226
Rebased version of #31580. Meant to be a prototype that demonstrate how this could possibly work.
Not functional yet; waiting on cache to continue.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
merge-conflict
|
305/1 |
Mathlib/Geometry/Manifold/Notation.lean,Mathlib/Tactic/FunProp/Core.lean,MathlibTest/DifferentialGeometry/FunPropM.lean,MathlibTest/fun_prop_dev.lean |
4 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
67-33131 2 months ago |
71-46703 71 days ago |
0-12 12 seconds |
| 39329 |
lecopivo author:lecopivo |
feat(fun_prop): eager application of transition theorems for fun_prop |
For properties like Integrable we want to apply transition theorems(like Continuous -> Integrable) eagerly
---
This is a change necessary in preparation for making `fun_prop` work for integrability.
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
merge-conflict
|
93/30 |
Mathlib/Tactic/FunProp/Attr.lean,Mathlib/Tactic/FunProp/Core.lean,Mathlib/Tactic/FunProp/Decl.lean,MathlibTest/FunPropMinimal.lean |
4 |
14 |
['b-mehta', 'github-actions', 'lecopivo', 'mathlib-merge-conflicts'] |
JovanGerb assignee:JovanGerb |
64-79949 2 months ago |
67-7497 67 days ago |
1-47071 1 day |
| 37584 |
kennethgoodman author:kennethgoodman |
feat(Data/Nat/Fib): formalize Lamé's theorem |
## Summary
Formalize [Lamé's theorem](https://en.wikipedia.org/wiki/Lam%C3%A9%27s_theorem) (1844), the founding result of computational complexity theory.
**Lamé's Theorem:** If the Euclidean algorithm on inputs `(a, b)` with `b ≤ a` takes `n + 1` division steps, then `b ≥ fib(n + 1)` and `a ≥ fib(n + 2)`.
### New definitions
- `Nat.euclidSteps`: counts the number of division steps in the Euclidean algorithm on natural number inputs.
### New theorems
- `Nat.fib_le_of_euclidSteps`: the main Lamé bound — Fibonacci lower bound on inputs given a step count.
- `Nat.euclidSteps_le_of_lt_fib`: the contrapositive — step count upper bound given a Fibonacci bound on the smaller input.
- `Nat.add_mod_le`: helper lemma that `b + a % b ≤ a` when `b ≤ a` and `0 < b`.
### Proof strategy
Induction on `n`, tracking both elements of the pair. The key insight is that each Euclidean step replaces `(a, b)` with `(b, a % b)`, and since `a ≥ b + a % b` (because `a / b ≥ 1`), the Fibonacci recurrence `fib(n+3) = fib(n+2) + fib(n+1)` matches the structure of the algorithm.
### References
- Gabriel Lamé, *Note sur la limite du nombre des divisions dans la recherche du plus grand commun diviseur entre deux nombres entiers*, Comptes rendus de l'Académie des sciences, 1844.
---
### AI usage disclosure
Per the [Mathlib AI guidelines](https://leanprover-community.github.io/contribute/index.html#use-of-ai): Claude Code (Claude Opus 4.6) was used to assist with writing the Lean 4 proof code, fixing tactic errors, and drafting this PR description. The mathematical proof (induction on step count, tracking both pair elements through the Fibonacci recurrence) was designed by hand and verified on paper before formalization. I have reviewed and understand every line of the resulting Lean code and can explain all proof steps.
---
- [x] builds cleanly (`lake build Mathlib.Data.Nat.Fib.Lame`)
- [x] no `sorry`
- [x] lines ≤ 100 characters, no trailing whitespace
- [x] `autoImplicit false`
- [x] docstrings on all public declarations |
new-contributor
LLM-generated
t-data
merge-conflict
|
121/0 |
Mathlib.lean,Mathlib/Data/Nat/Basic.lean,Mathlib/Data/Nat/Fib/Basic.lean,Mathlib/Data/Nat/Fib/Lame.lean,docs/1000.yaml |
5 |
25 |
['euprunin', 'github-actions', 'kennethgoodman', 'mathlib-merge-conflicts', 'vihdzp', 'wwylele'] |
TwoFX assignee:TwoFX |
64-68622 2 months ago |
64-68623 64 days ago |
44-66371 44 days |
| 39509 |
mcdoll author:mcdoll |
chore(Topology): add `push/pull_end` tags for CLMs |
Simpsets were introduced in #38359, see also #39508
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
merge-conflict
|
2/0 |
Mathlib/Topology/Algebra/Module/LinearMap.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
j-loreaux assignee:j-loreaux |
62-48122 2 months ago |
62-52170 62 days ago |
3-40182 3 days |
| 36774 |
euprunin author:euprunin |
chore: replace long terminal `rw […]`:s (≥4 lemmas) with bare `simp`:s |
The goal of this PR is to decrease the number of times lemmas are called explicitly. Any decrease in compilation time is a welcome side effect, although it is not a primary objective.
Trace profiling results (differences <30 ms considered measurement noise):
* `Finset.lcm_union`: unchanged 🎉
* `Finset.gcd_union`: unchanged 🎉
* `Polynomial.derivative_eval₂_C`: unchanged 🎉
* `Polynomial.expand_pow`: unchanged 🎉
* `Cardinal.mk_real`: unchanged 🎉
* `Real.log_zpow`: unchanged 🎉
* `Matroid.eRank_le_encard_add_eRk_compl`: unchanged 🎉
* `DFinsupp.single_tsub`: unchanged 🎉
* `EReal.inv_neg`: unchanged 🎉
* `Finsupp.toMultiset_map`: unchanged 🎉
* `Finsupp.single_tsub`: unchanged 🎉
* `Multiset.countP_map`: unchanged 🎉
* `Nat.ascFactorial_eq_factorial_mul_choose'`: unchanged 🎉
* `Real.sign_intCast`: unchanged 🎉
* `Real.volume_eball`: unchanged 🎉
* `Real.volume_closedEBall`: unchanged 🎉
* `LFunction_ne_zero_of_not_quadratic_or_ne_one`: 295 ms before, 152 ms after 🎉
* `hasSum_one_div_nat_pow_mul_cos`: unchanged 🎉
* `inv_eq_of_aeval_divX_ne_zero`: unchanged 🎉
* `AlgebraicIndependent.aeval_comp_mvPolynomialOptionEquivPolynomialAdjoin`: unchanged 🎉
* `Ordinal.deriv_mul_eq_opow_omega0_mul`: unchanged 🎉
Profiled using `set_option trace.profiler true in`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
22/24 |
Mathlib/Algebra/GCDMonoid/Finset.lean,Mathlib/Algebra/Polynomial/Derivative.lean,Mathlib/Algebra/Polynomial/Expand.lean,Mathlib/Analysis/Real/Cardinality.lean,Mathlib/Analysis/SpecialFunctions/Log/Basic.lean,Mathlib/Combinatorics/Matroid/Rank/ENat.lean,Mathlib/Data/DFinsupp/Order.lean,Mathlib/Data/EReal/Inv.lean,Mathlib/Data/Finsupp/Multiset.lean,Mathlib/Data/Finsupp/Order.lean,Mathlib/Data/Multiset/Filter.lean,Mathlib/Data/Nat/Choose/Basic.lean,Mathlib/Data/Real/Sign.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/NumberTheory/LSeries/Nonvanishing.lean,Mathlib/NumberTheory/ZetaValues.lean,Mathlib/RingTheory/Algebraic/Basic.lean,Mathlib/RingTheory/AlgebraicIndependent/Basic.lean,Mathlib/SetTheory/Ordinal/FixedPoint.lean |
19 |
3 |
['artie2000', 'euprunin', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
59-77559 1 month ago |
59-77560 59 days ago |
67-395 67 days |
| 16074 |
Rida-Hamadani author:Rida-Hamadani |
feat: combinatorial maps and planar graphs |
We define combinatorial maps, then we define planar graph using combinatorial maps.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-combinatorics
|
243/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Planar.lean,Mathlib/Data/CombinatorialMap.lean |
3 |
30 |
['MrBrain295', 'Parcly-Taxel', 'Rida-Hamadani', 'github-actions', 'lambda-fairy', 'leanprover-community-bot-assistant'] |
kmill assignee:kmill |
57-42692 1 month ago |
382-39125 382 days ago |
72-50365 72 days |
| 38989 |
grunweg author:grunweg |
chore: remove `(d)simp only []` |
Either remove them (when they were unnecessary), or replace by something more low-level.
---
I'm happy to make them `simp only` instead, if that is preferred.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
10/17 |
Counterexamples/AharoniKorman.lean,Mathlib/Analysis/SpecialFunctions/Integrals/PosLogEqCircleAverage.lean,Mathlib/CategoryTheory/Limits/Fubini.lean,Mathlib/Computability/PartrecCode.lean,Mathlib/Computability/RE.lean,Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Computability/TuringMachine/StackTuringMachine.lean,Mathlib/LinearAlgebra/Matrix/Basis.lean,Mathlib/MeasureTheory/Covering/Besicovitch.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/ModelTheory/Encoding.lean |
11 |
5 |
['b-mehta', 'github-actions', 'grunweg', 'mathlib-merge-conflicts'] |
nobody |
56-52367 1 month ago |
56-52368 56 days ago |
20-56482 20 days |
| 39676 |
joneugster author:joneugster |
chore: move test files and recapitalise filennames |
Continuation of #39674. Renames all test files to use UpperCamelCase. Moves a few files to a folder according to the location of the tested file.
---
While fixing capitalisation on all filenames, this PR makes no effort to sort all test files into according folders. This will be happening in follow-ups.
- [x] depends on: #39681
- [x] depends on: #39682
- [ ] depends on: #39683
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
file-removed
merge-conflict
|
22/22 |
MathlibTest/AesopCat.lean,MathlibTest/Algebra/Algebra/Rat.lean,MathlibTest/Algebra/Polynomial.lean,MathlibTest/Algebra/Quaternion.lean,MathlibTest/Data/DFinsupp/DFinsuppMultiLinear.lean,MathlibTest/Data/DFinsupp/Notation.lean,MathlibTest/Data/Fin/VecNotation.lean,MathlibTest/Data/FunLike.lean,MathlibTest/Data/Real.lean,MathlibTest/Data/ZMod.lean,MathlibTest/DeriveCountable.lean,MathlibTest/DeriveCountableModule.lean,MathlibTest/DeriveEncodable.lean,MathlibTest/ENatToNat.lean,MathlibTest/EvalElab.lean,MathlibTest/FailIfNoProgress.lean,MathlibTest/FastInstance.lean,MathlibTest/FinsetBuilder.lean,MathlibTest/FinsetRepr.lean,MathlibTest/FinsuppNotation.lean,MathlibTest/FormatTable.lean,MathlibTest/ImportAll.lean,MathlibTest/InstanceDiamonds.lean,MathlibTest/InstanceDiamonds/Analysis/Normed/Field/WithAbs.lean,MathlibTest/InstanceDiamonds/Data/Complex/Module.lean,MathlibTest/InstanceDiamonds/FieldTheory/IsAlgClosed/AlgebraicClosure.lean,MathlibTest/InstanceDiamonds/FieldTheory/SplittingField/Construction.lean,MathlibTest/InstanceDiamonds/Normed.lean,MathlibTest/JacobiSymbol.lean,MathlibTest/Lean/Tactic/Grind/AC.lean,MathlibTest/Lean/Tactic/Grind/CC.lean,MathlibTest/Lean/Tactic/Grind/Field.lean,MathlibTest/Lean/Tactic/Grind/FieldInstance.lean,MathlibTest/Lean/Tactic/Grind/Grobner.lean,MathlibTest/Lean/Tactic/Grind/Linarith.lean,MathlibTest/Lean/Tactic/Grind/Lint.lean,MathlibTest/Lean/Tactic/Grind/NatCastInstance.lean,MathlibTest/Lean/Tactic/Grind/OrderedRing.lean,MathlibTest/Lean/Tactic/Grind/PairwiseDisjoint.lean,MathlibTest/Lean/Tactic/Grind/Panic.lean,MathlibTest/Lean/Tactic/Grind/Ring.lean,MathlibTest/Lean/Tactic/Grind/Set.lean,MathlibTest/Lean/Tactic/Grind/Trig.lean,MathlibTest/Lean/Tactic/Rewrites.lean,MathlibTest/Linter/DeprecatedModule/DeprecatedModule.lean,MathlibTest/Linter/DeprecatedModule/DeprecatedModuleAllTest.lean,MathlibTest/Linter/DeprecatedModule/DeprecatedModuleMetaTest.lean,MathlibTest/Linter/DeprecatedModule/DeprecatedModuleNew.lean,MathlibTest/Linter/DeprecatedModule/DeprecatedModulePublicMetaTest.lean,MathlibTest/Linter/DeprecatedModule/DeprecatedModulePublicTest.lean,MathlibTest/Linter/DeprecatedModule/DeprecatedModuleTest.lean,MathlibTest/Linter/DeprecatedSyntaxLinter.lean,MathlibTest/Linter/DocPrime.lean,MathlibTest/Linter/DocString.lean,MathlibTest/Linter/EmptyLine.lean,MathlibTest/Linter/FlexibleLinter.lean,MathlibTest/Linter/ForbiddenModuleNames.lean,MathlibTest/Linter/HaveLetLinter.lean,MathlibTest/Linter/ImportHeavyFlexibleLinter.lean,MathlibTest/Linter/Lint.lean,MathlibTest/Linter/ModuleCasing.lean,MathlibTest/Linter/OldObtain.lean,MathlibTest/Linter/PrivateModuleLinter/HasOnlyPrivate.lean,MathlibTest/Linter/PrivateModuleLinter/HasPublic.lean,MathlibTest/Linter/PrivateModuleLinter/ImportOnly.lean,MathlibTest/Linter/PrivateModuleLinter/Initialize.lean,MathlibTest/Linter/PrivateModuleLinter/NonModule.lean,MathlibTest/Linter/PrivateModuleLinter/Notation3.lean,MathlibTest/Linter/PrivateModuleLinter/ReservedName1.lean,MathlibTest/Linter/PrivateModuleLinter/ReservedName2.lean,MathlibTest/Linter/Style/LintStyle.lean,MathlibTest/Linter/Style/LongFile.lean,MathlibTest/Linter/UnusedTactic/AesopUnusedTactic.lean,MathlibTest/Linter/UnusedTactic/UnusedTactic.lean,MathlibTest/Linter/ValidatePRTitle.lean,MathlibTest/Linter/VersoHeader.lean,MathlibTest/Linter/Whitespace.lean,MathlibTest/NormCast.lean,MathlibTest/RegisterTryTactic.lean,MathlibTest/RightActions.lean,MathlibTest/SetLike.lean,MathlibTest/SimpConfluence.lean,MathlibTest/SlimCheck.lean,MathlibTest/SlowInstances.lean,MathlibTest/SlowSimp.lean,MathlibTest/Tactic/ApplyCongr.lean,MathlibTest/Tactic/ApplyFun.lean,MathlibTest/Tactic/ApplyRules.lean,MathlibTest/Tactic/ApplyWith.lean,MathlibTest/Tactic/Bound/Attribute.lean,MathlibTest/Tactic/Bound/Bound.lean,MathlibTest/Tactic/ByContra.lean,MathlibTest/Tactic/CancelDenoms.lean,MathlibTest/Tactic/Cases.lean,MathlibTest/Tactic/CasesM.lean,MathlibTest/Tactic/Change.lean,MathlibTest/Tactic/Check.lean,MathlibTest/Tactic/Choose/Choose.lean,MathlibTest/Tactic/Choose/Reduction.lean,MathlibTest/Tactic/Clean.lean |
192 |
5 |
['github-actions', 'grunweg', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
55-40653 1 month ago |
55-40654 55 days ago |
1-38699 1 day |
| 39388 |
marcelolynch author:marcelolynch |
chore: remove @[expose] from def-free public sections |
Strip `@[expose]` from `public section` headers in 100 modules where no declaration needs its body visible downstream. A new sweep in the style of #38480
Found using the linter-in-progress: #39387
Relevant Zulip thread: https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Removing.20unnecessary.20.60.40.5Bexpose.5D.60/with/595180230 |
merge-conflict |
100/100 |
Mathlib/Algebra/Category/Ring/Small.lean,Mathlib/Algebra/Field/Basic.lean,Mathlib/Algebra/Field/MinimalAxioms.lean,Mathlib/Algebra/Field/Opposite.lean,Mathlib/Algebra/Field/Rat.lean,Mathlib/Algebra/Field/ULift.lean,Mathlib/Algebra/Field/ZMod.lean,Mathlib/Algebra/Group/Action/Option.lean,Mathlib/Algebra/Group/Action/Sigma.lean,Mathlib/Algebra/Group/Action/Sum.lean,Mathlib/Algebra/Group/Action/Units.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Group/Submonoid/MulAction.lean,Mathlib/Algebra/Module/Projective.lean,Mathlib/Algebra/Module/Submodule/Basic.lean,Mathlib/Algebra/NonAssoc/LieAdmissible/Defs.lean,Mathlib/Algebra/Notation/Prod.lean,Mathlib/Algebra/Order/Floor/Div.lean,Mathlib/Algebra/Order/Group/Action/End.lean,Mathlib/Algebra/Order/Group/End.lean,Mathlib/Algebra/Order/Group/PosPart.lean,Mathlib/Algebra/Order/Kleene.lean,Mathlib/Algebra/Order/Nonneg/Lattice.lean,Mathlib/Algebra/Order/Pi.lean,Mathlib/Algebra/Order/Ring/Unbundled/Rat.lean,Mathlib/Algebra/Ring/Commute.lean,Mathlib/AlgebraicTopology/ModelCategory/Over.lean,Mathlib/Analysis/InnerProductSpace/Coalgebra.lean,Mathlib/Analysis/Normed/Algebra/TrivSqZeroExt.lean,Mathlib/Analysis/Normed/Group/Constructions.lean,Mathlib/Analysis/Normed/Module/MStructure.lean,Mathlib/Analysis/Normed/Operator/Compact/FiniteDimension.lean,Mathlib/Analysis/ODE/DiscreteGronwall.lean,Mathlib/CategoryTheory/Localization/DerivabilityStructure/OfLocalizedEquivalences.lean,Mathlib/CategoryTheory/MarkovCategory/Positive.lean,Mathlib/CategoryTheory/Monoidal/Cartesian/Normal.lean,Mathlib/CategoryTheory/Monoidal/Functor/Types.lean,Mathlib/CategoryTheory/Monoidal/Types/Coyoneda.lean,Mathlib/CategoryTheory/Sites/CoversTop/Over.lean,Mathlib/Combinatorics/Additive/FreimanHom.lean,Mathlib/Computability/AkraBazzi/AkraBazzi.lean,Mathlib/Data/ENNReal/Action.lean,Mathlib/Data/ENat/Pow.lean,Mathlib/Data/Finsupp/Pointwise.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/FunLike/Embedding.lean,Mathlib/Data/FunLike/Equiv.lean,Mathlib/Data/Int/Cast/Pi.lean,Mathlib/Data/List/Monad.lean,Mathlib/Data/NNRat/Lemmas.lean,Mathlib/Data/Nat/Lattice.lean,Mathlib/Data/Prod/Lex.lean,Mathlib/Data/Rat/Cast/Defs.lean,Mathlib/Data/Rat/Cast/OfScientific.lean,Mathlib/Data/Real/Archimedean.lean,Mathlib/Data/ZMod/IntUnitsPower.lean,Mathlib/GroupTheory/GroupAction/Embedding.lean,Mathlib/GroupTheory/IsPerfect.lean,Mathlib/GroupTheory/ResiduallyFinite.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Star.lean,Mathlib/LinearAlgebra/Projectivization/Action.lean,Mathlib/LinearAlgebra/RootSystem/GeckConstruction/Semisimple.lean,Mathlib/MeasureTheory/Function/L2Space.lean,Mathlib/MeasureTheory/Integral/IntegralEqImproper.lean,Mathlib/MeasureTheory/Measure/Sub.lean,Mathlib/MeasureTheory/Measure/Typeclasses/ZeroOne.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Transform.lean,Mathlib/NumberTheory/NumberField/ExistsRamified.lean,Mathlib/NumberTheory/Padics/PadicVal/Defs.lean,Mathlib/Order/ConditionallyCompleteLattice/Basic.lean,Mathlib/Order/Filter/FilterProduct.lean,Mathlib/Order/Heyting/Basic.lean,Mathlib/Order/Interval/Set/OrdConnected.lean,Mathlib/Order/Quotient.lean,Mathlib/Probability/Kernel/Deterministic.lean,Mathlib/RingTheory/Coalgebra/Convolution.lean,Mathlib/RingTheory/Flat/IsBaseChange.lean,Mathlib/RingTheory/HopfAlgebra/TensorProduct.lean,Mathlib/RingTheory/Ideal/GoingDown.lean,Mathlib/RingTheory/Ideal/GoingUp.lean,Mathlib/RingTheory/Ideal/Maximal.lean,Mathlib/RingTheory/Localization/Finiteness.lean,Mathlib/RingTheory/Noetherian/Defs.lean,Mathlib/RingTheory/QuasiFinite/Basic.lean,Mathlib/RingTheory/QuasiFinite/Polynomial.lean,Mathlib/RingTheory/QuasiFinite/Weakly.lean,Mathlib/RingTheory/Regular/ProjectiveDimension.lean,Mathlib/RingTheory/SimpleModule/Basic.lean,Mathlib/RingTheory/Smooth/Fiber.lean,Mathlib/RingTheory/TensorProduct/IsBaseChangeRightExact.lean,Mathlib/RingTheory/Unramified/LocalRing.lean,Mathlib/RingTheory/Valuation/Extension.lean,Mathlib/RingTheory/Valuation/IsTrivialOn.lean,Mathlib/SetTheory/Cardinal/Regular.lean,Mathlib/Tactic/Algebra/Lemmas.lean,Mathlib/Topology/Algebra/UniformMulAction.lean,Mathlib/Topology/CWComplex/Classical/Subcomplex.lean,Mathlib/Topology/EMetricSpace/Pi.lean,Mathlib/Topology/List.lean,Mathlib/Topology/MetricSpace/Pseudo/Pi.lean |
100 |
7 |
['eric-wieser', 'github-actions', 'grunweg', 'marcelolynch', 'mathlib-merge-conflicts', 'urkud'] |
nobody |
53-48357 1 month ago |
53-48358 53 days ago |
15-23632 15 days |
| 39489 |
Paul-Lez author:Paul-Lez |
fix: defeq abuse in HasFTaylorSeriesUpToOn.comp |
Removes a `set_option backward.isDefEq.respectTransparency false`. The fix isn't as nice as I would have hoped (I tried to make it smaller but to no avail).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
merge-conflict
|
5/2 |
Mathlib/Analysis/Calculus/ContDiff/FaaDiBruno.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
j-loreaux assignee:j-loreaux |
53-48223 1 month ago |
53-48223 53 days ago |
12-82083 12 days |
| 39395 |
marcelolynch author:marcelolynch |
chore(Tactic/Linter): reword PrivateLinter suggestion |
This matches the granular-by-default philosophy of the new module system and produces files without superfluous `@[expose] public`, which we also want to flag as undesirable: we steer to making every @[expose] is per-decl and intentional, rather than section-wide
Relevant Zulip thread: https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Removing.20unnecessary.20.60.40.5Bexpose.5D.60/with/595180230 |
t-linter
merge-conflict
|
11/8 |
Mathlib/Tactic/Linter/PrivateModule.lean,MathlibTest/PrivateModuleLinter/hasOnlyPrivate.lean,MathlibTest/PrivateModuleLinter/notation3.lean,MathlibTest/PrivateModuleLinter/reservedName2.lean |
4 |
4 |
['JovanGerb', 'github-actions', 'grunweg', 'marcelolynch', 'mathlib-merge-conflicts'] |
JovanGerb assignee:JovanGerb |
52-84584 1 month ago |
57-39237 57 days ago |
11-19868 11 days |
| 26394 |
winstonyin author:winstonyin |
feat: existence of local flows on manifolds |
This PR continues the work from #21777.
Original PR: https://github.com/leanprover-community/mathlib4/pull/21777
Transfer the existence theorem of local flows on vector spaces to manifolds. The precise statement is:
> If a vector field `v` on a manifold `M` is continuously differentiable at an interior point `x₀`, then for a given `t₀` there exists a neighbourhood `u` of `x₀`, a positive `ε`, and `γ : M → ℝ → M` such that `γ x` is an integral curve of `v` on `(t₀ - ε, t₀ + ε)` for all `x ∈ u`.
This is powerful because all curves `γ x` (each with initial condition `x ∈ u`) share the same existence time interval `(t₀ - ε, t₀ + ε)`, rather than each curve having its own `ε`. This will allow us to show that $C^1$ vector fields on compact manifolds always have global integral curves / global flows.
Any suggestions to shorten the proof or split out useful lemmas are welcome!
- [x] depends on: #26392
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
merge-conflict
|
138/61 |
Mathlib/Analysis/ODE/PicardLindelof.lean,Mathlib/Geometry/Manifold/IntegralCurve/ExistUnique.lean,Mathlib/Order/Filter/Prod.lean |
3 |
13 |
['github-actions', 'grunweg', 'leanprover-community-bot-assistant', 'mathlib-merge-conflicts', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'ocfnash', 'winstonyin'] |
ocfnash assignee:ocfnash |
52-57081 1 month ago |
52-57082 52 days ago |
23-5862 23 days |
| 39205 |
ooovi author:ooovi |
feat(Geometry/Convex): Bundled convex set |
Add a bundled version of `IsConvexSet`.
---
Once the dependencies are merged, this PR only changes `Mathlib.Geometry.Convex.Set` and `Mathlib.Geometry.Convex.Hull`, at the bottom of the file, adding `ConvexSet` and everything in the corresponding namespace.
- [ ] depends on: #38934
- [ ] depends on: #38905
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import
merge-conflict
|
989/172 |
Mathlib.lean,Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Geometry/Convex/ConvexSpace/AffineSpace.lean,Mathlib/Geometry/Convex/ConvexSpace/Defs.lean,Mathlib/Geometry/Convex/Hull.lean,Mathlib/Geometry/Convex/README.md,Mathlib/Geometry/Convex/Set.lean |
8 |
6 |
['github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
47-80615 1 month ago |
unknown |
0-0 0 seconds |
| 38344 |
robo7179 author:robo7179 |
feat(SimpleGraph/Coloring/VertexColoring): Matching is 2 colorable |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
merge-conflict
|
51/0 |
Mathlib/Combinatorics/SimpleGraph/Coloring/VertexColoring.lean |
1 |
6 |
['SnirBroshi', 'github-actions', 'mathlib-merge-conflicts', 'vlad902'] |
b-mehta assignee:b-mehta |
44-82456 1 month ago |
44-82457 44 days ago |
46-71620 46 days |
| 37707 |
MavenRain author:MavenRain |
feat(Combinatorics/SimpleGraph): add IsMaximalClique/IsMaximalIndepSet, refactor IsMaximum* to MaximalFor |
Addresses #34962
|
new-contributor
t-combinatorics
merge-conflict
|
63/31 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean |
1 |
7 |
['MavenRain', 'SnirBroshi', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
40-63383 1 month ago |
40-63384 40 days ago |
26-52833 26 days |
| 39545 |
Hagb author:Hagb |
feat(Order/OrderIsoNat): some lemmas about `((· < ·) : ℕ → ℕ → Prop) ↪r r` |
This PR contains several lemmas about relation embedding from `<` in `Nat`, well order, and (in)finiteness.
- `RelEmbedding.infinite_iff_nonempty_relEmbedding_of_isWellOrder`: a type with a well order relation is infinite iff there is such a relation embedding.
- `RelEmbedding.finite_iff_empty_relEmbedding_of_isWellOrder`: a finite variant of `infinite_iff_nonempty_relEmbedding_of_isWellOrder`
- `IsWellOrder.finite_of_isWellOrder_of_isWellOrder_swap`: a type with a linear order relation well founded on both directions is finite.
- `instFiniteOfWellFoundedLTOfWellFoundedGT`: an instance variant of `IsWellOrder.finite_of_isWellOrder_of_isWellOrder_swap` on `WellFounded{LT,GT}`.
- `RelEmbedding.infinite_iff_nonempty_relEmbedding_lt_or_nonempty_relEmbedding_gt`: a type with a linear order relation is infinite iff there are both relation embedding between `<` in `Nat` and this relation, and between `>` in `Nat` and this relation.
- `RelEmbedding.finite_iff_isEmpty_relEmbedding_lt_and_isEmpty_relEmbedding_gt`: a finite variant of `infinite_iff_nonempty_relEmbedding_lt_or_nonempty_relEmbedding_gt`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
<details>
<summary> Edit: remove the description on the original motivation since `WellQuasiOrdered` instead of theorems in this PR can be used for that goal. </summary>
`RelEmbedding.finite_iff_empty_relEmbedding_of_isWellOrder` might be used for proof of
```lean
example {α β γ} [LinearOrder α] [LinearOrder β] [WellFoundedLT α] [WellFoundedLT β] [LinearOrder γ]
{f : α × β ≃ γ} (mono : Monotone f) : WellFoundedLT γ := sorry
```
The latter will be used for
```lean
example {α β γ} [Finite α] [LinearOrder β] [WellFoundedLT β] [LinearOrder γ]
{f : (α → β) ≃ γ} (mono : Monotone f) : WellFoundedLT γ := sorry
```
And the finial goal is the well-foundedness of monomial order when the index type `σ` is finite (under the definition in #39214). |
t-order
merge-conflict
|
58/0 |
Mathlib/Order/OrderIsoNat.lean |
1 |
16 |
['Hagb', 'SnirBroshi', 'github-actions', 'leanprover-radar', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
40-60453 1 month ago |
40-60454 40 days ago |
23-50475 23 days |
| 39769 |
chenson2018 author:chenson2018 |
chore(Topology): refactor proofs where `grind?` fails |
These are sources of technical debt as now reported in the [weekly linting report](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log/with/544658968). The idea is that a successful `grind` proof can fail to report the theorems it used via `grind?`, which means that if these proofs break across toolchains that it becomes significantly harder to repair.
Most of these are fixed by squeezing the call to `grind` and unsetting `linter.tacticAnalysis.verifyGrindOnly` so they no longer appear in the weekly report. Unfortunately, this can't be on by default for performance reasons, but I highly encourage using this linter when adding any `grind` proofs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
merge-conflict
|
35/17 |
Mathlib/Topology/Compactness/CountablyCompact.lean,Mathlib/Topology/EMetricSpace/BoundedVariation.lean,Mathlib/Topology/MetricSpace/Pseudo/Defs.lean,Mathlib/Topology/Order/Basic.lean,Mathlib/Topology/Order/IsLUB.lean,Mathlib/Topology/Order/WithTop.lean,Mathlib/Topology/Path.lean,Mathlib/Topology/Sets/VietorisTopology.lean,Mathlib/Topology/Sheaves/Flasque.lean |
9 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
40-60328 1 month ago |
40-60328 40 days ago |
18-36384 18 days |
| 40428 |
eric-wieser author:eric-wieser |
chore: remove a duplicate instance |
We already build this instance in the general case, I don't think we need to build it again.
We keep the shortcut since we already have other shortcuts of this style.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
merge-conflict
label:t-algebra$ |
2/3 |
Mathlib/Algebra/Field/Subfield/Basic.lean |
1 |
4 |
['eric-wieser', 'github-actions', 'leanprover-radar', 'mathlib-merge-conflicts'] |
nobody |
39-53746 1 month ago |
39-53747 39 days ago |
3-19832 3 days |
| 38823 |
matthewjasper author:matthewjasper |
chore(LinearAlgebra/TensorProduct): fix diamond in `AddCommGroup` instance |
The `SMul` instance for tensor products directly used `AddCon.lift`, so wasn't type correct at instance transparency. This caused a diamond with the `AddCommGroup` instance on tensor products because after unfolding some types didn't match, so I've wrapped the sMul function in a semireducible def to prevent this.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
merge-conflict
label:t-algebra$ |
30/23 |
Mathlib/LinearAlgebra/TensorProduct/Basic.lean,Mathlib/LinearAlgebra/TensorProduct/Defs.lean |
2 |
7 |
['dagurtomas', 'github-actions', 'kbuzzard', 'leanprover-radar', 'mathlib-merge-conflicts'] |
nobody |
34-54505 1 month ago |
39-56198 39 days ago |
42-6323 42 days |
| 34855 |
staroperator author:staroperator |
feat(Order): use `to_dual` for `PFilter` |
This PR redefines `PFilter` to get rid of `OrderDual` and uses `to_dual` to translate theorems. The whole file of `PFilter` is now deprecated.
Some changes:
- To align with `Filter`, the order on `PFilter` is changed to the reversed set inclusion. Ultrafilters, the dual notion of maximal ideals, become minimal in this order.
- `to_dual` does not work on `sequenceOfCofinals`. I left `Order.Cofinal` and the Rasiowa–Sikorski lemma not `to_dual`-ized, and we should move them to a separate file later.
- `IsLEChain` is added to tag `to_dual`.
- `IsCoatom.isProper`/`IsCoatom.isMaximal` is deprecated by `Order.Ideal.isProper_of_isCoatom`/`Order.Ideal.isMaximal_of_isProper`, since this result is special to ideals while `IsCoatom` namespace should be for orders in general.
---
- [x] depends on: #34820
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
merge-conflict
|
292/242 |
Mathlib/Order/Atoms.lean,Mathlib/Order/BooleanAlgebra/Basic.lean,Mathlib/Order/BooleanAlgebra/Defs.lean,Mathlib/Order/CompleteLattice/Defs.lean,Mathlib/Order/Ideal.lean,Mathlib/Order/PFilter.lean,Mathlib/Order/Preorder/Chain.lean,Mathlib/Order/PrimeIdeal.lean,Mathlib/Order/PrimeSeparator.lean,Mathlib/Order/ZornAtoms.lean,Mathlib/RingTheory/IdealFilter/Basic.lean,Mathlib/RingTheory/IdealFilter/Topology.lean,Mathlib/Tactic/Translate/ToDual.lean |
13 |
6 |
['JovanGerb', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
30-76121 1 month ago |
43-57796 43 days ago |
38-31545 38 days |
| 38968 |
eric-wieser author:eric-wieser |
fix: improve defeqs of comp actions |
The (deliberately) non-reducible `SMul.comp.smul` definition caused us to end with these failing unification examples at instance reducibility:
```lean
example : (Module.compHom ℕ (RingHom.id ℕ)).toSMul = SMul.comp ℕ (RingHom.id ℕ) := by
with_reducible_and_instances rfl
example : (Module.compHom ℕ (RingHom.id ℕ)).toMulAction = MulAction.compHom ℕ (MonoidHom.id ℕ) := by
with_reducible_and_instances rfl
```
There are two issues this fixes:
* the `compHom` constructors are inconsistent on whether they use `SMul.comp.smul` or reimplement its contents
* we need `SMul.comp.smul` to be instance-reducible, so that when invoked with the identity function it is instance-defeq to the original action.
As a bonus, allowing these to unify means we can have a single `SMul.comp_smul_def` lemma that works for all of the `compHom` definitions.
We could also consider changing `compHom` to take a `HomClass` in order to remove the casts entirely, which would remove the need to add these `SMul.comp` terms. This PR leaves that for possible future work, noting that in the past we have moved away from writing `def`s taking `HomClass`es.
Co-authored-by: Junye Ji <jijunye1@outlook.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
Refined from #38777 |
t-algebra
merge-conflict
label:t-algebra$ |
46/26 |
Mathlib/Algebra/Algebra/Defs.lean,Mathlib/Algebra/Group/Action/Defs.lean,Mathlib/Algebra/Group/Action/Hom.lean,Mathlib/Algebra/GroupWithZero/Action/Defs.lean,Mathlib/Algebra/GroupWithZero/Action/End.lean,Mathlib/Algebra/Module/RingHom.lean,Mathlib/Analysis/Complex/UpperHalfPlane/MoebiusAction.lean,Mathlib/Analysis/Complex/UpperHalfPlane/ProperAction.lean,Mathlib/Topology/Algebra/Group/OpenMapping.lean |
9 |
13 |
['JJYYY-JJY', 'Vierkantor', 'eric-wieser', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
29-52698 29 days ago |
29-52699 29 days ago |
13-10860 13 days |
| 26911 |
JovanGerb author:JovanGerb |
chore: fix naming of `mono` and `monotone` |
The naming convention says:
"We use `_mono` for `a ≤ b → f a ≤ f b` and `_anti` for `a ≤ b → f b ≤ f a`, so we also use `_monotone` for `Monotone f`, `_antitone` for `Antitone f`, `_strictMono` for `StrictMono f`, `_strictAnti` for `StrictAnti f`, etc..."
This PR swaps `mono`/`anti` and `monotone`/`antitone` where required so that `monotone` refers to `Monotone`, while `mono` refers to a lemma that might be tagged with `@[gcongr]`
This PR does not address
- `monotone_right`/`mono_right` vs `right_monotone`/`right_mono`
- `monotone_arcsin` vs `arcsin_monotone`
edit: TODO: `ideal_mono` and friends
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
235/169 |
Archive/Imo/Imo1962Q1.lean,Archive/Wiedijk100Theorems/AbelRuffini.lean,Archive/Wiedijk100Theorems/SumOfPrimeReciprocalsDiverges.lean,Counterexamples/DiscreteTopologyNonDiscreteUniformity.lean,Mathlib/Algebra/Group/Pointwise/Finset/Basic.lean,Mathlib/Algebra/Group/Pointwise/Set/Basic.lean,Mathlib/Algebra/Order/AddGroupWithTop.lean,Mathlib/Algebra/Order/Field/Basic.lean,Mathlib/Algebra/Order/Group/Basic.lean,Mathlib/Algebra/Order/Group/Finset.lean,Mathlib/Algebra/Order/Group/PosPart.lean,Mathlib/Algebra/Order/GroupWithZero/Unbundled/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Pow.lean,Mathlib/Algebra/Order/ToIntervalMod.lean,Mathlib/Algebra/Polynomial/Degree/CardPowDegree.lean,Mathlib/AlgebraicGeometry/IdealSheaf/Basic.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Convex/Deriv.lean,Mathlib/Analysis/Normed/Order/UpperLower.lean,Mathlib/Analysis/Normed/Unbundled/SeminormFromConst.lean,Mathlib/Analysis/PSeries.lean,Mathlib/Analysis/Real/Pi/Bounds.lean,Mathlib/Analysis/SpecialFunctions/Pow/Continuity.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Basic.lean,Mathlib/Analysis/SpecificLimits/Basic.lean,Mathlib/Analysis/SpecificLimits/FloorPow.lean,Mathlib/Combinatorics/SetFamily/Kleitman.lean,Mathlib/Combinatorics/SimpleGraph/Girth.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Lemma.lean,Mathlib/Data/ENNReal/Inv.lean,Mathlib/Data/ENNReal/Operations.lean,Mathlib/Data/ENat/Pow.lean,Mathlib/Data/Nat/Choose/Factorization.lean,Mathlib/Dynamics/Circle/RotationNumber/TranslationNumber.lean,Mathlib/LinearAlgebra/AffineSpace/AffineMap.lean,Mathlib/MeasureTheory/Constructions/BorelSpace/Basic.lean,Mathlib/MeasureTheory/Constructions/Polish/Basic.lean,Mathlib/MeasureTheory/MeasurableSpace/MeasurablyGenerated.lean,Mathlib/MeasureTheory/OuterMeasure/Operations.lean,Mathlib/NumberTheory/Bertrand.lean,Mathlib/NumberTheory/FermatPsp.lean,Mathlib/NumberTheory/Height/Basic.lean,Mathlib/NumberTheory/ModularForms/Bounds.lean,Mathlib/NumberTheory/Padics/Hensel.lean,Mathlib/NumberTheory/Padics/WithVal.lean,Mathlib/Order/Concept.lean,Mathlib/Order/Filter/AtTopBot/Archimedean.lean,Mathlib/Order/Filter/AtTopBot/Defs.lean,Mathlib/Order/Fin/Basic.lean,Mathlib/Order/Heyting/Basic.lean,Mathlib/Order/Heyting/Boundary.lean,Mathlib/Order/Heyting/Regular.lean,Mathlib/Order/Hom/Set.lean,Mathlib/Order/Interval/Set/Fin.lean,Mathlib/Order/KrullDimension.lean,Mathlib/Order/UpperLower/Closure.lean,Mathlib/Probability/StrongLaw.lean,Mathlib/RingTheory/DedekindDomain/Ideal/Basic.lean,Mathlib/RingTheory/FractionalIdeal/Basic.lean,Mathlib/RingTheory/WittVector/Basic.lean,Mathlib/Topology/EMetricSpace/Lipschitz.lean,Mathlib/Topology/MetricSpace/Antilipschitz.lean |
63 |
15 |
['JovanGerb', 'bryangingechen', 'github-actions', 'leanprover-community-bot-assistant', 'mathlib-bors', 'mathlib-merge-conflicts', 'wrenna-robson'] |
bryangingechen assignee:bryangingechen |
28-35192 28 days ago |
376-1435 376 days ago |
2-53782 2 days |
| 34932 |
erdOne author:erdOne |
feat(AlgebraicGeometry): formally etale morphisms |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
merge-conflict
|
163/12 |
Mathlib.lean,Mathlib/AlgebraicGeometry/Morphisms/Etale.lean,Mathlib/AlgebraicGeometry/Morphisms/FormallyEtale.lean,Mathlib/AlgebraicGeometry/Morphisms/RingHomProperties.lean,Mathlib/RingTheory/RingHom/Etale.lean |
5 |
21 |
['chrisflav', 'erdOne', 'github-actions', 'joneugster', 'mathlib-bors', 'mathlib-merge-conflicts', 'ocfnash'] |
nobody |
28-35191 28 days ago |
147-56678 147 days ago |
11-35673 11 days |
| 27180 |
ADedecker author:ADedecker |
feat: quotient of a monoid with zero by a multiplicative congruence |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
My motivation is getting a more conceptual construction of [ValuativeRel.ValueGroupWithZero](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/Valuation/ValuativeRel.html#ValuativeRel.ValueGroupWithZero), but I think this is of independent interest.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
141/26 |
Mathlib.lean,Mathlib/Data/Quot.lean,Mathlib/Data/Setoid/Basic.lean,Mathlib/GroupTheory/Congruence/Defs.lean,Mathlib/GroupTheory/Congruence/GroupWithZero.lean |
5 |
38 |
['ADedecker', 'eric-wieser', 'github-actions', 'mathlib-bors', 'mathlib4-merge-conflict-bot', 'ocfnash'] |
ocfnash assignee:ocfnash |
28-35188 28 days ago |
343-20088 343 days ago |
28-12053 28 days |
| 31607 |
grunweg author:grunweg |
chore: rename `continuous{,On,At,Within}_const` to `ContinuousFoo.const` |
Zulip discussion: [#mathlib4 > Naming convention @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Naming.20convention/near/447491526)
---
- [x] depends on: #34441
- [x] depends on: #34688
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
412/378 |
Archive/Hairer.lean,Mathlib/Analysis/Analytic/Basic.lean,Mathlib/Analysis/Analytic/Inverse.lean,Mathlib/Analysis/Asymptotics/Lemmas.lean,Mathlib/Analysis/BoxIntegral/Box/Basic.lean,Mathlib/Analysis/BoxIntegral/UnitPartition.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Continuity.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Unital.lean,Mathlib/Analysis/Calculus/BumpFunction/FiniteDimension.lean,Mathlib/Analysis/Calculus/BumpFunction/InnerProduct.lean,Mathlib/Analysis/Calculus/DSlope.lean,Mathlib/Analysis/Calculus/Deriv/MeanValue.lean,Mathlib/Analysis/Calculus/DiffContOnCl.lean,Mathlib/Analysis/Calculus/FDeriv/Analytic.lean,Mathlib/Analysis/Calculus/FDeriv/Symmetric.lean,Mathlib/Analysis/Calculus/MeanValue.lean,Mathlib/Analysis/Calculus/Rademacher.lean,Mathlib/Analysis/Calculus/Taylor.lean,Mathlib/Analysis/Complex/AbelLimit.lean,Mathlib/Analysis/Complex/AbsMax.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/Complex/CauchyIntegral.lean,Mathlib/Analysis/Complex/HalfPlane.lean,Mathlib/Analysis/Complex/LocallyUniformLimit.lean,Mathlib/Analysis/Complex/PhragmenLindelof.lean,Mathlib/Analysis/Complex/RemovableSingularity.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Basic.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Measure.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Metric.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Topology.lean,Mathlib/Analysis/Convex/Cone/InnerDual.lean,Mathlib/Analysis/Convex/Exposed.lean,Mathlib/Analysis/Convex/Gauge.lean,Mathlib/Analysis/Convex/PartitionOfUnity.lean,Mathlib/Analysis/Convex/Side.lean,Mathlib/Analysis/Convex/StdSimplex.lean,Mathlib/Analysis/Convolution.lean,Mathlib/Analysis/InnerProductSpace/Continuous.lean,Mathlib/Analysis/InnerProductSpace/Harmonic/HarmonicContOnCl.lean,Mathlib/Analysis/InnerProductSpace/LinearPMap.lean,Mathlib/Analysis/InnerProductSpace/MeanErgodic.lean,Mathlib/Analysis/InnerProductSpace/OfNorm.lean,Mathlib/Analysis/LocallyConvex/Separation.lean,Mathlib/Analysis/Meromorphic/Order.lean,Mathlib/Analysis/Meromorphic/TrailingCoefficient.lean,Mathlib/Analysis/Normed/Affine/AddTorsor.lean,Mathlib/Analysis/Normed/Group/Continuity.lean,Mathlib/Analysis/Normed/Group/Lemmas.lean,Mathlib/Analysis/Normed/Module/Ball/Homeomorph.lean,Mathlib/Analysis/Normed/Module/Connected.lean,Mathlib/Analysis/Normed/Module/FiniteDimension.lean,Mathlib/Analysis/Normed/Module/Multilinear/Basic.lean,Mathlib/Analysis/Normed/Operator/Completeness.lean,Mathlib/Analysis/ODE/Gronwall.lean,Mathlib/Analysis/ODE/PicardLindelof.lean,Mathlib/Analysis/RCLike/Basic.lean,Mathlib/Analysis/Seminorm.lean,Mathlib/Analysis/SpecialFunctions/Complex/Arg.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Rpow/Isometric.lean,Mathlib/Analysis/SpecialFunctions/Elliptic/Weierstrass.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Basic.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Deligne.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/GaussianIntegral.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/PoissonSummation.lean,Mathlib/Analysis/SpecialFunctions/Integrability/Basic.lean,Mathlib/Analysis/SpecialFunctions/Integrals/Basic.lean,Mathlib/Analysis/SpecialFunctions/MulExpNegMulSq.lean,Mathlib/Analysis/SpecialFunctions/PolarCoord.lean,Mathlib/Analysis/SpecialFunctions/Pow/Continuity.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Basic.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Inverse.lean,Mathlib/Computability/AkraBazzi/SumTransform.lean,Mathlib/Condensed/Light/TopCatAdjunction.lean,Mathlib/Condensed/TopCatAdjunction.lean,Mathlib/Dynamics/OmegaLimit.lean,Mathlib/Geometry/Euclidean/Angle/Oriented/Basic.lean,Mathlib/Geometry/Manifold/Bordism.lean,Mathlib/Geometry/Manifold/Complex.lean,Mathlib/Geometry/Manifold/Instances/Icc.lean,Mathlib/Geometry/Manifold/Instances/Real.lean,Mathlib/Geometry/Manifold/SmoothApprox.lean,Mathlib/MeasureTheory/Function/SpecialFunctions/Basic.lean,Mathlib/MeasureTheory/Integral/Bochner/Basic.lean,Mathlib/MeasureTheory/Integral/CircleIntegral.lean,Mathlib/MeasureTheory/Integral/CircleTransform.lean,Mathlib/MeasureTheory/Integral/DominatedConvergence.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/Basic.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/FundThmCalculus.lean,Mathlib/MeasureTheory/Integral/RieszMarkovKakutani/Real.lean,Mathlib/MeasureTheory/Measure/LevyProkhorovMetric.lean,Mathlib/MeasureTheory/Measure/Stieltjes.lean,Mathlib/NumberTheory/Cyclotomic/CyclotomicCharacter.lean,Mathlib/NumberTheory/Harmonic/ZetaAsymp.lean,Mathlib/NumberTheory/LSeries/AbstractFuncEq.lean,Mathlib/NumberTheory/LSeries/Deriv.lean,Mathlib/NumberTheory/LSeries/Dirichlet.lean,Mathlib/NumberTheory/LSeries/DirichletContinuation.lean,Mathlib/NumberTheory/LSeries/HurwitzZetaOdd.lean,Mathlib/NumberTheory/LSeries/PrimesInAP.lean |
185 |
19 |
['github-actions', 'j-loreaux', 'mathlib-bors', 'mathlib-merge-conflicts', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
28-35186 28 days ago |
250-58320 250 days ago |
0-1 1 second |
| 37819 |
YellPika author:YellPika |
feat(Order/OmegaCompletePartialOrder): add `OmegaCompletePartialOrder` instance for `WithBot` with basic `ωScottContinuous` lemmas |
This is a modification of #34093. See #34093 for details.
---
- [x] depends on: #33941
- [x] depends on: #37258
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
merge-conflict
|
337/10 |
Mathlib/Algebra/Order/Ring/WithTop.lean,Mathlib/Analysis/BoxIntegral/Box/Basic.lean,Mathlib/Order/Monotone/Basic.lean,Mathlib/Order/OmegaCompletePartialOrder.lean,Mathlib/Order/TypeTags.lean,Mathlib/Order/WithBot.lean |
6 |
6 |
['Komyyy', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
24-9063 24 days ago |
82-35950 82 days ago |
22-11204 22 days |
| 40369 |
plp127 author:plp127 |
refactor: make `IsAtom` not depend on `OrderBot` |
We choose for `IsAtom a` to mean `∃ b, b ⋖ a ∧ ∀ c, c < a → b ≤ c`, which is equivalent to the current definition in the case of a `PartialOrder` with `OrderBot`. See [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/.60IsAtom.60.20is.20wrong.20for.20preorders/near/601014129).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
merge-conflict
|
370/300 |
Mathlib/Algebra/Group/Subgroup/Order.lean,Mathlib/Algebra/Lie/InvariantForm.lean,Mathlib/Algebra/Lie/Killing.lean,Mathlib/Algebra/Lie/Semisimple/Basic.lean,Mathlib/Data/Finset/Grade.lean,Mathlib/GroupTheory/GroupAction/Jordan.lean,Mathlib/GroupTheory/Perm/MaximalSubgroups.lean,Mathlib/GroupTheory/SpecificGroups/Alternating/MaximalSubgroups.lean,Mathlib/GroupTheory/Sylow.lean,Mathlib/LinearAlgebra/Basis/VectorSpace.lean,Mathlib/LinearAlgebra/FiniteDimensional/Basic.lean,Mathlib/LinearAlgebra/Span/Basic.lean,Mathlib/Order/Atoms.lean,Mathlib/Order/BooleanGenerators.lean,Mathlib/Order/CompactlyGenerated/Basic.lean,Mathlib/Order/Filter/Ultrafilter/Defs.lean,Mathlib/Order/Ideal.lean,Mathlib/Order/Partition/Finpartition.lean,Mathlib/Order/Radical.lean,Mathlib/Order/SuccPred/Tree.lean,Mathlib/Order/ZornAtoms.lean,Mathlib/RingTheory/ChainOfDivisors.lean,Mathlib/RingTheory/DedekindDomain/Dvr.lean,Mathlib/RingTheory/DedekindDomain/Ideal/Basic.lean,Mathlib/RingTheory/DualNumber.lean,Mathlib/RingTheory/Ideal/Basic.lean,Mathlib/RingTheory/Ideal/GoingUp.lean,Mathlib/RingTheory/Ideal/Maps.lean,Mathlib/RingTheory/Ideal/Maximal.lean,Mathlib/RingTheory/Ideal/Quotient/Basic.lean,Mathlib/RingTheory/Jacobson/Ideal.lean,Mathlib/RingTheory/Jacobson/Radical.lean,Mathlib/RingTheory/Jacobson/Ring.lean,Mathlib/RingTheory/KrullDimension/Zero.lean,Mathlib/RingTheory/LocalRing/Basic.lean,Mathlib/RingTheory/LocalRing/MaximalIdeal/Basic.lean,Mathlib/RingTheory/PrincipalIdealDomain.lean,Mathlib/RingTheory/SimpleModule/Isotypic.lean,Mathlib/RingTheory/Spectrum/Prime/Basic.lean,Mathlib/Topology/Sets/Closeds.lean |
40 |
3 |
['github-actions', 'mathlib-merge-conflicts', 'plp127'] |
nobody |
20-57904 20 days ago |
20-57905 20 days ago |
22-11352 22 days |
| 37716 |
slavanaprienko author:slavanaprienko |
feat(LinearAlgebra/Matrix/Determinant): Desnanot-Jacobi identity |
This PR adds the Desnanot-Jacobi identity (also known as the Lewis Carroll identity or Dodgson condensation): for any (n+2)×(n+2) matrix M over a commutative ring,
$$\det(M) \cdot \det(M_{1,n}^{1,n}) = \det(M_1^1) \cdot \det(M_n^n) - \det(M_1^n) \cdot \det(M_n^1)$$
The proof follows Bressoud's *Proofs and Confirmations* (Cambridge University Press, 1999): multiply M by an auxiliary matrix built from columns of the adjugate, then compare determinants. This yields the identity premultiplied by det(M). To cancel, we pass to a universal polynomial ring (an integral domain with nonzero determinant), then specialize back to arbitrary commutative rings.
It seems there's some interest in adding this:
https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Determinantal.20identity.20and.20the.20Cauchy.20matrix.20determinant/with/582946873
--- |
t-algebra
new-contributor
merge-conflict
label:t-algebra$ |
217/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Matrix/Determinant/DesnanotJacobi.lean |
2 |
14 |
['SnirBroshi', 'github-actions', 'grunweg', 'kim-em', 'mathlib-merge-conflicts', 'slavanaprienko'] |
ocfnash assignee:ocfnash |
19-55954 19 days ago |
19-55955 19 days ago |
53-49476 53 days |
| 39847 |
vihdzp author:vihdzp |
chore: redefine `Ordinal.preOmega` using `Order.enum` |
The plan is to deprecate `Ordinal.enumOrd` in favor of `Order.enum`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39136
[](https://gitpod.io/from-referrer/)
|
t-set-theory
merge-conflict
|
104/28 |
Mathlib/Order/Cofinal.lean,Mathlib/SetTheory/Cardinal/Aleph.lean,Mathlib/SetTheory/Cardinal/Cofinality/Club.lean,Mathlib/SetTheory/Cardinal/Cofinality/Enum.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
19-22486 19 days ago |
19-22487 19 days ago |
0-28694 7 hours |
| 38228 |
kim-em author:kim-em |
ci: block merging PRs that increase technical debt unless reviewed |
This PR adds a merge gate for technical debt increases.
When the existing technical debt metrics script reports an increase, the `build` job adds an `increases-technical-debt` label. A `check-technical-debt` job then adds `blocked-by-increases-technical-debt`, which blocks bors.
A reviewer can add `allow-increases-technical-debt` to unblock after confirming the increase is acceptable.
### Fail-closed detection
The detection greps for the *safe* patterns (`Decrease in tech debt:` / `No changes to technical debt.`) rather than for `Increase`. If `mathlib-ci` changes the script's output wording, the label is added (fail closed) rather than silently skipped (fail open).
### Labels (three-label pattern, same as #38225)
| Label | Managed by | Purpose |
|---|---|---|
| `increases-technical-debt` | `build` job (tech debt script) | Factual: this PR increases debt |
| `blocked-by-increases-technical-debt` | `check-technical-debt` job | Operational: blocks bors |
| `allow-increases-technical-debt` | Reviewer | Override: reviewer approves the increase |
Bors's `block_labels` has no conditional logic, so we need the derived `blocked-by-increases-technical-debt` label to express the conjunction "increases-technical-debt AND NOT allow-increases-technical-debt".
False positives can be reported on the [mathlib4 Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/increases-technical-debt.20label).
🤖 Prepared with Claude Code
-----------
- [x] depends on: leanprover-community/mathlib-ci#28 |
CI
merge-conflict
|
83/2 |
.github/workflows/PR_summary.yml,bors.toml |
2 |
10 |
['github-actions', 'grunweg', 'jcommelin', 'joneugster', 'kim-em', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
bryangingechen assignee:bryangingechen |
18-67337 18 days ago |
18-67338 18 days ago |
49-25630 49 days |
| 39638 |
mcdoll author:mcdoll |
feat(Algebra): use `Is*Apply` for `LinearMap` |
Some of the instances can't be simplified to use `FunLike.module` etc because of the `assert_not_exists Pi.module` in `Algebra/Module/LinearMap/Defs.lean` and the principled solution would be to move out the instances to the `Basic` file, but that makes the already large diff even worse and will be done in a second PR.
Using `IsAddApply` means that even though `add_apply` is proved by `rfl` it is not used by `dsimp`, therefore a lot of theorems that used `dsimp` had to be changed.
---
There are a couple of proofs in the (co-)homology files that get worse and I honestly don't understand what is going on there - my feeling is that the reason is something else and not the refactor, but I don't know this part of mathlib at all.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
merge-conflict
label:t-algebra$ |
424/429 |
Archive/Sensitivity.lean,Mathlib/Algebra/Azumaya/Matrix.lean,Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/ChangeOfRings.lean,Mathlib/Algebra/Category/ModuleCat/Differentials/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Semi.lean,Mathlib/Algebra/Central/End.lean,Mathlib/Algebra/Group/ForwardDiff.lean,Mathlib/Algebra/Lie/Abelian.lean,Mathlib/Algebra/Lie/AdjointAction/Derivation.lean,Mathlib/Algebra/Lie/BaseChange.lean,Mathlib/Algebra/Lie/Basis.lean,Mathlib/Algebra/Lie/CartanExists.lean,Mathlib/Algebra/Lie/Cochain.lean,Mathlib/Algebra/Lie/Derivation/Basic.lean,Mathlib/Algebra/Lie/EngelSubalgebra.lean,Mathlib/Algebra/Lie/Extension.lean,Mathlib/Algebra/Lie/InvariantForm.lean,Mathlib/Algebra/Lie/LieTheorem.lean,Mathlib/Algebra/Lie/Nilpotent.lean,Mathlib/Algebra/Lie/TensorProduct.lean,Mathlib/Algebra/Lie/TraceForm.lean,Mathlib/Algebra/Lie/Weights/Basic.lean,Mathlib/Algebra/Lie/Weights/Cartan.lean,Mathlib/Algebra/Lie/Weights/IsSimple.lean,Mathlib/Algebra/Lie/Weights/Killing.lean,Mathlib/Algebra/Module/CharacterModule.lean,Mathlib/Algebra/Module/FinitePresentation.lean,Mathlib/Algebra/Module/LinearMap/Basic.lean,Mathlib/Algebra/Module/LinearMap/Defs.lean,Mathlib/Algebra/Module/LinearMap/End.lean,Mathlib/Algebra/Module/LinearMap/Polynomial.lean,Mathlib/Algebra/Module/Presentation/Basic.lean,Mathlib/Algebra/Module/Submodule/Bilinear.lean,Mathlib/Algebra/Module/Submodule/LinearMap.lean,Mathlib/Algebra/Module/Submodule/Map.lean,Mathlib/Algebra/MonoidAlgebra/Degree.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/Polynomial/HasseDeriv.lean,Mathlib/Algebra/TrivSqZeroExt/Basic.lean,Mathlib/Analysis/Calculus/LagrangeMultipliers.lean,Mathlib/Analysis/Complex/Conformal.lean,Mathlib/Analysis/Fourier/BoundedContinuousFunctionChar.lean,Mathlib/Analysis/Fourier/FourierTransform.lean,Mathlib/Analysis/InnerProductSpace/Adjoint.lean,Mathlib/Analysis/InnerProductSpace/ConformalLinearMap.lean,Mathlib/Analysis/InnerProductSpace/LinearMap.lean,Mathlib/Analysis/InnerProductSpace/LinearPMap.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/InnerProductSpace/Projection/FiniteDimensional.lean,Mathlib/Analysis/InnerProductSpace/Projection/Reflection.lean,Mathlib/Analysis/InnerProductSpace/Spectrum.lean,Mathlib/Analysis/InnerProductSpace/TensorProduct.lean,Mathlib/Analysis/LocallyConvex/Polar.lean,Mathlib/Analysis/Normed/Module/FiniteDimension.lean,Mathlib/Analysis/Normed/Operator/Bilinear.lean,Mathlib/Analysis/Seminorm.lean,Mathlib/FieldTheory/JacobsonNoether.lean,Mathlib/FieldTheory/NormalizedTrace.lean,Mathlib/Geometry/Euclidean/Angle/Oriented/Affine.lean,Mathlib/Geometry/Euclidean/Angle/Oriented/Rotation.lean,Mathlib/Geometry/Euclidean/Angle/Unoriented/Affine.lean,Mathlib/LinearAlgebra/AffineSpace/AffineMap.lean,Mathlib/LinearAlgebra/AffineSpace/Basis.lean,Mathlib/LinearAlgebra/AffineSpace/Combination.lean,Mathlib/LinearAlgebra/Alternating/Basic.lean,Mathlib/LinearAlgebra/Basis/Defs.lean,Mathlib/LinearAlgebra/Basis/SMul.lean,Mathlib/LinearAlgebra/BilinearForm/DualLattice.lean,Mathlib/LinearAlgebra/BilinearForm/Hom.lean,Mathlib/LinearAlgebra/BilinearForm/Orthogonal.lean,Mathlib/LinearAlgebra/BilinearForm/Properties.lean,Mathlib/LinearAlgebra/Center.lean,Mathlib/LinearAlgebra/Charpoly/Basic.lean,Mathlib/LinearAlgebra/CliffordAlgebra/BaseChange.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Contraction.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Equivs.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Even.lean,Mathlib/LinearAlgebra/CliffordAlgebra/EvenEquiv.lean,Mathlib/LinearAlgebra/Contraction.lean,Mathlib/LinearAlgebra/CrossProduct.lean,Mathlib/LinearAlgebra/Determinant.lean,Mathlib/LinearAlgebra/Dimension/Free.lean,Mathlib/LinearAlgebra/Dual/Basis.lean,Mathlib/LinearAlgebra/Dual/Defs.lean,Mathlib/LinearAlgebra/Dual/Lemmas.lean,Mathlib/LinearAlgebra/Eigenspace/Basic.lean,Mathlib/LinearAlgebra/Eigenspace/Triangularizable.lean,Mathlib/LinearAlgebra/Eigenspace/Zero.lean,Mathlib/LinearAlgebra/ExteriorAlgebra/OfAlternating.lean,Mathlib/LinearAlgebra/Finsupp/LSum.lean,Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean,Mathlib/LinearAlgebra/LinearPMap.lean,Mathlib/LinearAlgebra/Matrix/Ideal.lean,Mathlib/LinearAlgebra/Matrix/Kronecker.lean,Mathlib/LinearAlgebra/Matrix/SesquilinearForm.lean,Mathlib/LinearAlgebra/Matrix/ToLin.lean,Mathlib/LinearAlgebra/Multilinear/Basic.lean,Mathlib/LinearAlgebra/Pi.lean |
163 |
31 |
['Vierkantor', 'github-actions', 'grunweg', 'mathlib-merge-conflicts', 'mcdoll'] |
nobody |
17-84995 17 days ago |
17-84995 17 days ago |
10-54344 10 days |
| 39807 |
vihdzp author:vihdzp |
feat: universe-heterogeneous cardinal equality |
We introduce a predicate `LiftEq a b`, with notation `a =ₗ b`, which states that two cardinals (in different universes) are equal. This serves as a single canonical spelling for `lift.{v} a = lift.{u} b` and similar incantations.
Future PRs will introduce the analogous predicates for `<` and `≤`, and a notation typeclass so the notation can be reused for `Ordinal` and `OrderType`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory
merge-conflict
|
319/152 |
Mathlib/Algebra/FreeAlgebra/Cardinality.lean,Mathlib/CategoryTheory/Abelian/GrothendieckCategory/EnoughInjectives.lean,Mathlib/FieldTheory/IsAlgClosed/Classification.lean,Mathlib/LinearAlgebra/Dimension/Basic.lean,Mathlib/LinearAlgebra/Dimension/Constructions.lean,Mathlib/LinearAlgebra/Dimension/Free.lean,Mathlib/LinearAlgebra/Dimension/FreeAndStrongRankCondition.lean,Mathlib/LinearAlgebra/Dimension/LinearMap.lean,Mathlib/LinearAlgebra/Dimension/StrongRankCondition.lean,Mathlib/ModelTheory/Basic.lean,Mathlib/ModelTheory/Satisfiability.lean,Mathlib/RingTheory/AlgebraicIndependent/Basic.lean,Mathlib/RingTheory/AlgebraicIndependent/RankAndCardinality.lean,Mathlib/RingTheory/AlgebraicIndependent/TranscendenceBasis.lean,Mathlib/RingTheory/LinearDisjoint.lean,Mathlib/RingTheory/Localization/Cardinality.lean,Mathlib/SetTheory/Cardinal/Aleph.lean,Mathlib/SetTheory/Cardinal/Arithmetic.lean,Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Cardinal/Defs.lean,Mathlib/SetTheory/Cardinal/ENat.lean,Mathlib/SetTheory/Cardinal/Order.lean,Mathlib/SetTheory/Cardinal/ToNat.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/ZFC/Cardinal.lean |
25 |
3 |
['acmepjz', 'github-actions', 'mathlib-merge-conflicts'] |
alreadydone assignee:alreadydone |
17-84994 17 days ago |
17-84994 17 days ago |
39-75155 39 days |
| 40626 |
chenson2018 author:chenson2018 |
feat(Logic/Relation): some `EqvGen` API |
This is adapted from #40606 and existing lemmas in CSLib. I move two theorems (`Equivalence.eqvGen_iff` and `Equivalence.eqvGen_eq`) earlier for a better proof of `EqvGen.lift'` that matches what is done for other closures.
Co-authored-by: Dagur Asgeirsson <dagurtomas@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic
merge-conflict
|
77/14 |
Mathlib/Logic/Relation.lean |
1 |
6 |
['chenson2018', 'github-actions', 'mathlib-merge-conflicts', 'plp127'] |
nobody |
15-66484 15 days ago |
15-66485 15 days ago |
19-39562 19 days |
| 34164 |
Scarlett-le author:Scarlett-le |
feat(Geometry/Euclidean/Sphere): define arcs on spheres |
This PR defines arcs on spheres and proves basic properties.
## Main definitions
* `EuclideanGeometry.Sphere.Arc`: An arc on a sphere, defined by a left
endpoint and a midpoint on the sphere. The right endpoint is computed as
the reflection of left across the line through the center and mid.
* `Arc.opposite`: The opposite arc (same endpoints, antipodal mid).
* `Arc.oppositeEquiv`: The involution given by `opposite`.
* `Arc.minor` / `Arc.major`: The minor/major arc between two
non-diametrically-opposite points.
* `Arc.through`: The arc from `A` to `C` passing through `B`.
* `Arc.avoiding`: The arc from `A` to `C` not passing through `B`.
## Main results
* `through_right` / `avoiding_right`: The right endpoint equals `C`.
* `mem_interior_through` / `mem_through`: `B` lies in the `through` arc.
* `not_mem_avoiding`: `B` does not lie in the `avoiding` arc (when `A ≠ C`).
## Dependencies
- [x] depends on: #36241
- [x] depends on: #35956
- [x] depends on: #35957
- [x] depends on: #40245 |
t-euclidean-geometry
merge-conflict
|
982/0 |
Mathlib.lean,Mathlib/Analysis/Convex/Side.lean,Mathlib/Analysis/InnerProductSpace/Projection/FiniteDimensional.lean,Mathlib/Geometry/Euclidean/Sphere/Arc.lean,Mathlib/Geometry/Euclidean/Sphere/OrthRadius.lean,Mathlib/LinearAlgebra/Ray.lean |
6 |
16 |
['Scarlett-le', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'wwylele'] |
jsm28 assignee:jsm28 |
13-72537 13 days ago |
13-72538 13 days ago |
6-9201 6 days |
| 40435 |
bryangingechen author:bryangingechen |
ci: duplicate declarations report |
This adds a workflow that runs `lintDuplicateDeclarations` weekly and posts a summary to Zulip (with the full report in a workflow artifact).
Prepared with Claude code.
---
- [ ] depends on: #33640
|
merge-conflict |
350/0 |
.github/workflows/duplicate_decls_report.yml,Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/DuplicateDecls.lean,MathlibTest/Tactic/DuplicateDecls.lean,MathlibTest/Tactic/DuplicateDeclsAux.lean,docs/workflows.md,scripts/README.md,scripts/dup_decls_report.lean |
9 |
9 |
['bryangingechen', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
nobody |
13-67947 13 days ago |
42-67025 42 days ago |
0-126 2 minutes |
| 39875 |
mkaratarakis author:mkaratarakis |
refactor(NumberField/House): expose Siegel lemma infrastructure |
Expose Siegel's lemma infrastructure in `NumberField.House`: rename the private
basis-matrix bound to `basisMatrixInvSupNorm`, make `house` reducible, and
adjust `exists_ne_zero_int_vec_house_le`.
Needed for #39874
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
merge-conflict |
59/48 |
Mathlib/NumberTheory/NumberField/House.lean |
1 |
5 |
['github-actions', 'mathlib-merge-conflicts', 'mkaratarakis', 'tb65536'] |
nobody |
13-59486 13 days ago |
13-59487 13 days ago |
43-4796 43 days |
| 41411 |
grunweg author:grunweg |
perf( Mathlib/CategoryTheory/Sites/LocallySurjective.lean): investigate removing transitive import #41406 |
---
#41406, but on top of #41222
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
1/3965 |
Mathlib/Algebra/AffineMonoid/Embedding.lean,Mathlib/Algebra/Algebra/Basic.lean,Mathlib/Algebra/Algebra/Epi.lean,Mathlib/Algebra/Algebra/IsSimpleRing.lean,Mathlib/Algebra/Algebra/NonUnitalHom.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Opposite.lean,Mathlib/Algebra/Algebra/Pi.lean,Mathlib/Algebra/Algebra/Prod.lean,Mathlib/Algebra/Algebra/Spectrum/Pi.lean,Mathlib/Algebra/Algebra/StrictPositivity.lean,Mathlib/Algebra/Algebra/Subalgebra/Directed.lean,Mathlib/Algebra/Algebra/Subalgebra/Matrix.lean,Mathlib/Algebra/Algebra/Subalgebra/Rank.lean,Mathlib/Algebra/Algebra/Unitization.lean,Mathlib/Algebra/Azumaya/Basic.lean,Mathlib/Algebra/BigOperators/Expect.lean,Mathlib/Algebra/BigOperators/Field.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/BigOperators/Group/Finset/Defs.lean,Mathlib/Algebra/BigOperators/Group/List/Basic.lean,Mathlib/Algebra/BigOperators/Group/List/Lemmas.lean,Mathlib/Algebra/BigOperators/GroupWithZero/Action.lean,Mathlib/Algebra/BigOperators/Pi.lean,Mathlib/Algebra/BigOperators/Ring/List.lean,Mathlib/Algebra/BigOperators/Ring/Multiset.lean,Mathlib/Algebra/BigOperators/Sym.lean,Mathlib/Algebra/Category/AlgCat/Basic.lean,Mathlib/Algebra/Category/AlgCat/Limits.lean,Mathlib/Algebra/Category/AlgCat/Monoidal.lean,Mathlib/Algebra/Category/CoalgCat/ComonEquivalence.lean,Mathlib/Algebra/Category/CoalgCat/Monoidal.lean,Mathlib/Algebra/Category/FGModuleCat/EssentiallySmall.lean,Mathlib/Algebra/Category/Grp/Abelian.lean,Mathlib/Algebra/Category/Grp/Biproducts.lean,Mathlib/Algebra/Category/Grp/EnoughInjectives.lean,Mathlib/Algebra/Category/Grp/EpiMono.lean,Mathlib/Algebra/Category/Grp/ForgetCorepresentable.lean,Mathlib/Algebra/Category/Grp/Images.lean,Mathlib/Algebra/Category/Grp/IsFinite.lean,Mathlib/Algebra/Category/Grp/Kernels.lean,Mathlib/Algebra/Category/Grp/LargeColimits.lean,Mathlib/Algebra/Category/Grp/Limits.lean,Mathlib/Algebra/Category/Grp/Ulift.lean,Mathlib/Algebra/Category/ModuleCat/AB.lean,Mathlib/Algebra/Category/ModuleCat/Abelian.lean,Mathlib/Algebra/Category/ModuleCat/Algebra.lean,Mathlib/Algebra/Category/ModuleCat/Biproducts.lean,Mathlib/Algebra/Category/ModuleCat/ChangeOfRingsExact.lean,Mathlib/Algebra/Category/ModuleCat/Colimits.lean,Mathlib/Algebra/Category/ModuleCat/Ext/Finite.lean,Mathlib/Algebra/Category/ModuleCat/Images.lean,Mathlib/Algebra/Category/ModuleCat/Localization.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Abelian.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/ChangeOfRings.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Colimits.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Generator.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Sheafify.lean,Mathlib/Algebra/Category/ModuleCat/Products.lean,Mathlib/Algebra/Category/ModuleCat/Projective.lean,Mathlib/Algebra/Category/ModuleCat/ProjectiveDimension.lean,Mathlib/Algebra/Category/ModuleCat/Pseudofunctor.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/ChangeOfRings.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Localization.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/PullbackFree.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/PushforwardContinuous.lean,Mathlib/Algebra/Category/ModuleCat/Subobject.lean,Mathlib/Algebra/Category/MonCat/Basic.lean,Mathlib/Algebra/Category/MonCat/Colimits.lean,Mathlib/Algebra/Category/Ring/Epi.lean,Mathlib/Algebra/Category/Ring/EqualizerPushout.lean,Mathlib/Algebra/Category/Ring/Small.lean,Mathlib/Algebra/Category/Ring/Topology.lean,Mathlib/Algebra/Category/Ring/Under/Basic.lean,Mathlib/Algebra/Category/Semigrp/Basic.lean,Mathlib/Algebra/CharP/Algebra.lean,Mathlib/Algebra/CharP/Invertible.lean,Mathlib/Algebra/CharZero/AddMonoidHom.lean,Mathlib/Algebra/Colimit/DirectLimit.lean,Mathlib/Algebra/Colimit/Module.lean,Mathlib/Algebra/Colimit/Ring.lean,Mathlib/Algebra/ContinuedFractions/Computation/ApproximationCorollaries.lean,Mathlib/Algebra/ContinuedFractions/Computation/Approximations.lean,Mathlib/Algebra/ContinuedFractions/Computation/CorrectnessTerminating.lean,Mathlib/Algebra/ContinuedFractions/Computation/TerminatesIffRat.lean,Mathlib/Algebra/ContinuedFractions/Translations.lean,Mathlib/Algebra/DirectSum/Algebra.lean,Mathlib/Algebra/DirectSum/Basic.lean,Mathlib/Algebra/DirectSum/Decomposition.lean,Mathlib/Algebra/DirectSum/Finsupp.lean,Mathlib/Algebra/DirectSum/LinearMap.lean,Mathlib/Algebra/Divisibility/Prod.lean,Mathlib/Algebra/Exact/Basic.lean,Mathlib/Algebra/Exact/Sequence.lean,Mathlib/Algebra/Field/Basic.lean,Mathlib/Algebra/Field/ModEq.lean,Mathlib/Algebra/Field/NegOnePow.lean |
2595 |
6 |
['felixpernegger', 'github-actions', 'grunweg', 'leanprover-radar', 'mathlib-merge-conflicts'] |
nobody |
13-56286 13 days ago |
13-56287 13 days ago |
2-34691 2 days |
| 40223 |
felixpernegger author:felixpernegger |
chore: replace `by exact` occurences |
Basically: Replace `by exact abc` with `abc` whenever it works.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
318/382 |
Archive/Imo/Imo1982Q1.lean,Archive/Imo/Imo2024Q5.lean,Archive/Wiedijk100Theorems/BuffonsNeedle.lean,Archive/Wiedijk100Theorems/SumOfPrimeReciprocalsDiverges.lean,Mathlib/Algebra/BigOperators/Associated.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/ColimitFunctor.lean,Mathlib/Algebra/DirectSum/Basic.lean,Mathlib/Algebra/DirectSum/Module.lean,Mathlib/Algebra/Group/Opposite.lean,Mathlib/Algebra/Homology/Localization.lean,Mathlib/Algebra/Homology/SpectralObject/EpiMono.lean,Mathlib/Algebra/Lie/Submodule.lean,Mathlib/Algebra/Module/LocalizedModule/Submodule.lean,Mathlib/Algebra/Module/PID.lean,Mathlib/Algebra/Module/Presentation/Free.lean,Mathlib/Algebra/Module/SpanRankOperations.lean,Mathlib/Algebra/Module/Submodule/Range.lean,Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Algebra/Order/Module/HahnEmbedding.lean,Mathlib/Algebra/Polynomial/Eval/Algebra.lean,Mathlib/Algebra/Ring/Subsemiring/Defs.lean,Mathlib/Algebra/SkewMonoidAlgebra/Basic.lean,Mathlib/AlgebraicGeometry/IdealSheaf/Subscheme.lean,Mathlib/AlgebraicGeometry/OpenImmersion.lean,Mathlib/AlgebraicGeometry/Sites/SmallAffineZariski.lean,Mathlib/AlgebraicTopology/ExtraDegeneracy.lean,Mathlib/AlgebraicTopology/SimplicialSet/Coskeletal.lean,Mathlib/AlgebraicTopology/SimplicialSet/StdSimplex.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Instances.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Integral.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/NonUnital.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Unital.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Analysis/Calculus/ContDiff/FaaDiBruno.lean,Mathlib/Analysis/Calculus/Implicit.lean,Mathlib/Analysis/Calculus/SmoothSeries.lean,Mathlib/Analysis/Complex/SqrtDeriv.lean,Mathlib/Analysis/Distribution/ContDiffMapSupportedIn.lean,Mathlib/Analysis/Distribution/TestFunction.lean,Mathlib/Analysis/Fourier/AddCircle.lean,Mathlib/Analysis/Hofer.lean,Mathlib/Analysis/InnerProductSpace/Projection/Minimal.lean,Mathlib/Analysis/InnerProductSpace/StandardSubspace.lean,Mathlib/Analysis/MellinTransform.lean,Mathlib/Analysis/Meromorphic/Basic.lean,Mathlib/Analysis/Meromorphic/Order.lean,Mathlib/Analysis/Normed/Algebra/GelfandMazur.lean,Mathlib/Analysis/Normed/Group/InfiniteSum.lean,Mathlib/Analysis/SpecialFunctions/ExpDeriv.lean,Mathlib/Analysis/SpecialFunctions/NonIntegrable.lean,Mathlib/Analysis/SpecialFunctions/Pochhammer.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Bounds.lean,Mathlib/CategoryTheory/Abelian/GrothendieckCategory/ColimCoyoneda.lean,Mathlib/CategoryTheory/Bicategory/FunctorBicategory/Oplax.lean,Mathlib/CategoryTheory/Center/NegOnePow.lean,Mathlib/CategoryTheory/EffectiveEpi/Extensive.lean,Mathlib/CategoryTheory/Limits/Final.lean,Mathlib/CategoryTheory/Localization/Pi.lean,Mathlib/CategoryTheory/Monoidal/Cartesian/Basic.lean,Mathlib/CategoryTheory/Monoidal/Cartesian/Mon.lean,Mathlib/CategoryTheory/Pi/Basic.lean,Mathlib/CategoryTheory/Shift/InducedShiftSequence.lean,Mathlib/CategoryTheory/Sites/DenseSubsite/Basic.lean,Mathlib/CategoryTheory/Sites/Descent/Precoverage.lean,Mathlib/CategoryTheory/Sites/GlobalSections.lean,Mathlib/CategoryTheory/Sites/SheafOfTypes.lean,Mathlib/CategoryTheory/Sites/Sieves.lean,Mathlib/CategoryTheory/Triangulated/TStructure/TruncLTGE.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Prod.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Energy.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean,Mathlib/Computability/AkraBazzi/AkraBazzi.lean,Mathlib/Computability/AkraBazzi/GrowsPolynomially.lean,Mathlib/Data/DFinsupp/Sigma.lean,Mathlib/Data/ENNReal/Real.lean,Mathlib/Data/Finset/Sort.lean,Mathlib/Data/Nat/Digits/Lemmas.lean,Mathlib/Data/Nat/Squarefree.lean,Mathlib/Data/PNat/Factors.lean,Mathlib/Data/Rat/Floor.lean,Mathlib/Data/Real/Embedding.lean,Mathlib/Data/Seq/Basic.lean,Mathlib/Data/Sym/Sym2.lean,Mathlib/Data/WSeq/Relation.lean,Mathlib/FieldTheory/CardinalEmb.lean,Mathlib/FieldTheory/Galois/Profinite.lean,Mathlib/FieldTheory/IntermediateField/Adjoin/Defs.lean,Mathlib/Geometry/Convex/Cone/TensorProduct.lean,Mathlib/Geometry/Euclidean/Angle/Sphere.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/Geometry/Manifold/Algebra/LieGroup.lean,Mathlib/Geometry/Manifold/Instances/Real.lean,Mathlib/GroupTheory/FreeGroup/Basic.lean,Mathlib/GroupTheory/Perm/Sign.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Basic.lean,Mathlib/LinearAlgebra/Eigenspace/Pi.lean,Mathlib/LinearAlgebra/FreeModule/PID.lean |
189 |
67 |
['JovanGerb', 'b-mehta', 'felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
8-34688 8 days ago |
8-56490 8 days ago |
23-68244 23 days |
| 39139 |
or4nge19 author:or4nge19 |
feat(LinearAlgebra): Schur triangulation |
Adds Schur triangulation API for algebraically closed `RCLike`, proved by triangularizing an endomorphism, aiming at a more mathlib idiomatic approach than the original one in #20730 as it now (better) specializes the existing triangularization API and generalizes supporting lemmas in more natural places. A prerequisite for porting `Matrix.det_exp` proof from physlib.
It also proves half of existing TODO in Eigenspace.Triangularizable. It may need a split into 2 PRs and coordination with #37006 .
See [this](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Contribute.20Schur.20decomposition/with/532385359) and [this](https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/.28Matrix.20and.20NormedSpace.2Eexp.29.20.7C.20det.20.28exp.20A.29.20.3D.20exp.20.28trace.20A.29/with/581264603) zulip discussions.
Co-authored-by: [kuotsanhsu](https://github.com/kuotsanhsu) <learningstud@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import
merge-conflict
|
687/75 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/GramSchmidtOrtho.lean,Mathlib/Analysis/InnerProductSpace/Triangularizable.lean,Mathlib/LinearAlgebra/Basis/Fin.lean,Mathlib/LinearAlgebra/Basis/Flag.lean,Mathlib/LinearAlgebra/Eigenspace/Basic.lean,Mathlib/LinearAlgebra/Eigenspace/Triangularizable.lean,Mathlib/LinearAlgebra/Matrix/Block.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/Basic.lean,Mathlib/LinearAlgebra/Matrix/SchurTriangulation.lean |
10 |
7 |
['dagurtomas', 'github-actions', 'mathlib-merge-conflicts', 'or4nge19', 'themathqueen', 'wwylele'] |
nobody |
7-60625 7 days ago |
7-60626 7 days ago |
27-49788 27 days |
| 40651 |
Scarlett-le author:Scarlett-le |
feat: signed power of a point and dimension-free power-of-a-point converses |
This PR reworks the converse direction of the power of a point in `Mathlib/Geometry/Euclidean/Sphere/Power.lean` to be dimension-free, and adds the converse of the intersecting secants theorem.
Main additions:
* `Sphere.inner_vsub_vsub_eq_power`: the signed power `⟪a -ᵥ p, b -ᵥ p⟫` of a point
`p` on a secant line through `a, b ∈ s` is exactly `s.power p`; this unifies the
chord and secant cases without splitting on the sign.
* `Sphere.mem_of_inner_vsub_vsub_eq_power_of_mem_line`: a one-secant converse.
* `cospherical_of_inner_vsub_eq_inner_vsub`: a dimension-free converse to the power
of a point, stated with the signed invariant.
* `cospherical_of_mul_dist_eq_mul_dist_of_angle_eq_zero`: the converse of the
intersecting secants theorem (new).
Main change:
* `cospherical_of_mul_dist_eq_mul_dist_of_angle_eq_pi` (converse of the intersecting
chords theorem) is reproved via `cospherical_of_inner_vsub_eq_inner_vsub`, going
through the circumsphere of the triangle `{p₁, p₂, p₃}`. It no longer reduces to
the 2D case, so the `[Fact (finrank ℝ V = 2)]` / `[Module.Oriented ℝ V (Fin 2)]`
machinery, the private auxiliary lemma, and the `AffineIsometry` embedding into the
affine span are all removed. The statement is unchanged.
Imports `Mathlib.Geometry.Euclidean.Angle.Sphere` and
`Mathlib.Geometry.Euclidean.Similarity` are dropped; `Mathlib.Geometry.Euclidean.Circumcenter`
is added. |
t-euclidean-geometry
merge-conflict
|
139/92 |
Mathlib/Geometry/Euclidean/Angle/Unoriented/Affine.lean,Mathlib/Geometry/Euclidean/Sphere/Power.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
7-58550 7 days ago |
7-58551 7 days ago |
28-71807 28 days |
| 40725 |
dennj author:dennj |
chore(SetTheory/Ordinal): execute deprecation TODOs |
This PR resolves several ordinal deprecation TODOs by making the `add_one` spelling primary over the older `succ`-spelled theorem names.
It deprecates the old names, rewires Mathlib uses to the new names, and renames `Cardinal.noMaxOrder` to the more precise `Cardinal.noMaxOrder_ord_toType`. The old deprecated names are no longer used internally.
Code clean up in Ordinal.Notation |
t-set-theory
merge-conflict
|
118/148 |
Mathlib/CategoryTheory/Presentable/Directed.lean,Mathlib/CategoryTheory/Presentable/OrthogonalReflection.lean,Mathlib/CategoryTheory/SmallObject/IsCardinalForSmallObjectArgument.lean,Mathlib/FieldTheory/CardinalEmb.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Basic.lean,Mathlib/SetTheory/Ordinal/Exponential.lean,Mathlib/SetTheory/Ordinal/FixedPoint.lean,Mathlib/SetTheory/Ordinal/Notation.lean,Mathlib/SetTheory/Ordinal/Principal.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/Ordinal/Veblen.lean |
12 |
13 |
['dennj', 'github-actions', 'mathlib-merge-conflicts', 'plp127', 'vihdzp'] |
alreadydone assignee:alreadydone |
7-58548 7 days ago |
7-58549 7 days ago |
26-78772 26 days |
| 41615 |
kbuzzard author:kbuzzard |
chore: replace haveI/letI with have/let in tactic proofs of propositions |
My understanding is that we should be using `have`/`let` rather than `haveI`/`letI` in tactic proofs. I noticed that AI was getting this wrong and I suspect that it's because we're getting this wrong in mathlib a lot (possibly because `haveI` meant something different in Lean 3), and AI is training on mathlib.
Does this matter? In my experience the reaction of the community will be one of two things:
1) No. In which case let's leave things as they are.
2) Yes. In which case the correct approach is to (a) fix the error and (b) lint against it, to stop it happening in future.
I got Claude to write a linter to check for this, and it's #41562 . It's completely vibe-coded and I cannot vouch for any of it.
The result, when running it on mathlib, is the diff in this PR. In particular, we're getting it wrong a lot.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
I was intrigued to find out how often we're making this mistake in mathlib, and it probably took me about 10 minutes of my own time to get AI to write the linter and run it on mathlib. I will not mark this PR as AI-generated because it was generated by a linter. The linter itself was AI generated. It is not clear to me whether we should be merging this PR without merging the linter, and the linter will need careful human review, but I figured I would give the community the option to merge this PR anyway.
|
merge-conflict |
2625/2625 |
Archive/Imo/Imo2008Q3.lean,Archive/Imo/Imo2019Q2.lean,Archive/Wiedijk100Theorems/BallotProblem.lean,Archive/Wiedijk100Theorems/CubingACube.lean,Archive/Wiedijk100Theorems/FriendshipGraphs.lean,Counterexamples/CliffordAlgebraNotInjective.lean,Counterexamples/Phillips.lean,Counterexamples/SorgenfreyLine.lean,Counterexamples/ZeroDivisorsInAddMonoidAlgebras.lean,Mathlib/Algebra/Algebra/Operations.lean,Mathlib/Algebra/Algebra/Subalgebra/IsSimpleOrder.lean,Mathlib/Algebra/Algebra/Subalgebra/Rank.lean,Mathlib/Algebra/AlgebraicCard.lean,Mathlib/Algebra/BigOperators/Associated.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/Category/Grp/Images.lean,Mathlib/Algebra/Category/ModuleCat/ChangeOfRings.lean,Mathlib/Algebra/Category/ModuleCat/Differentials/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Free.lean,Mathlib/Algebra/Category/ModuleCat/Kernels.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Adjunction.lean,Mathlib/Algebra/Category/ModuleCat/Stalk.lean,Mathlib/Algebra/Category/Ring/Epi.lean,Mathlib/Algebra/Category/Ring/FinitePresentation.lean,Mathlib/Algebra/Category/Ring/LinearAlgebra.lean,Mathlib/Algebra/Central/Basic.lean,Mathlib/Algebra/CharP/Algebra.lean,Mathlib/Algebra/CharP/Defs.lean,Mathlib/Algebra/CharP/Invertible.lean,Mathlib/Algebra/CharP/Lemmas.lean,Mathlib/Algebra/CharP/LocalRing.lean,Mathlib/Algebra/CharP/MixedCharZero.lean,Mathlib/Algebra/CharP/Quotient.lean,Mathlib/Algebra/DirectSum/Decomposition.lean,Mathlib/Algebra/DualNumber.lean,Mathlib/Algebra/EuclideanDomain/Basic.lean,Mathlib/Algebra/Exact/Basic.lean,Mathlib/Algebra/Exact/Sequence.lean,Mathlib/Algebra/Field/Subfield/Basic.lean,Mathlib/Algebra/Group/Subgroup/Finite.lean,Mathlib/Algebra/Group/Subgroup/Lattice.lean,Mathlib/Algebra/Group/Submonoid/Membership.lean,Mathlib/Algebra/Group/TransferInstance.lean,Mathlib/Algebra/Homology/Additive.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/Basic.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/EnoughInjectives.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/EnoughProjectives.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/ExactSequences.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/ExtClass.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/TStructure.lean,Mathlib/Algebra/Homology/DerivedCategory/KInjective.lean,Mathlib/Algebra/Homology/DerivedCategory/KProjective.lean,Mathlib/Algebra/Homology/DerivedCategory/SmallShiftedHom.lean,Mathlib/Algebra/Homology/HomotopyCofiber.lean,Mathlib/Algebra/Homology/ImageToKernel.lean,Mathlib/Algebra/Homology/ShortComplex/Exact.lean,Mathlib/Algebra/Homology/ShortComplex/Homology.lean,Mathlib/Algebra/Homology/ShortComplex/LeftHomology.lean,Mathlib/Algebra/Homology/ShortComplex/QuasiIso.lean,Mathlib/Algebra/Homology/ShortComplex/RightHomology.lean,Mathlib/Algebra/Lie/Engel.lean,Mathlib/Algebra/Lie/Extension.lean,Mathlib/Algebra/Lie/Loop.lean,Mathlib/Algebra/Module/PID.lean,Mathlib/Algebra/Module/SnakeLemma.lean,Mathlib/Algebra/Module/SpanRank.lean,Mathlib/Algebra/Module/Submodule/Lattice.lean,Mathlib/Algebra/Module/Torsion/Basic.lean,Mathlib/Algebra/Module/TransferInstance.lean,Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/Notation/Indicator.lean,Mathlib/Algebra/Order/Group/Unbundled/Abs.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Polynomial/Degree/Operations.lean,Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Polynomial/Expand.lean,Mathlib/Algebra/Polynomial/Inductions.lean,Mathlib/Algebra/Polynomial/Module/Basic.lean,Mathlib/Algebra/Ring/Subring/Basic.lean,Mathlib/Algebra/Ring/Subsemiring/Basic.lean,Mathlib/Algebra/Squarefree/Basic.lean,Mathlib/Algebra/TrivSqZeroExt/Basic.lean,Mathlib/AlgebraicGeometry/AffineScheme.lean,Mathlib/AlgebraicGeometry/AffineTransitionLimit.lean,Mathlib/AlgebraicGeometry/ColimitsOver.lean,Mathlib/AlgebraicGeometry/EllipticCurve/IsomOfJ.lean,Mathlib/AlgebraicGeometry/EllipticCurve/NormalForms.lean,Mathlib/AlgebraicGeometry/FunctionField.lean,Mathlib/AlgebraicGeometry/IdealSheaf/Basic.lean,Mathlib/AlgebraicGeometry/IdealSheaf/Subscheme.lean,Mathlib/AlgebraicGeometry/Limits.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/AlgebraicGeometry/Morphisms/Affine.lean,Mathlib/AlgebraicGeometry/Morphisms/AffineAnd.lean,Mathlib/AlgebraicGeometry/Morphisms/Basic.lean,Mathlib/AlgebraicGeometry/Morphisms/ClosedImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Constructors.lean,Mathlib/AlgebraicGeometry/Morphisms/Finite.lean,Mathlib/AlgebraicGeometry/Morphisms/FormallyUnramified.lean |
963 |
9 |
['felixpernegger', 'github-actions', 'kbuzzard', 'leanprover-radar', 'mathlib-merge-conflicts'] |
nobody |
7-57145 7 days ago |
7-57146 7 days ago |
3-32524 3 days |
| 33402 |
AntoineChambert-Loir author:AntoineChambert-Loir |
feat(LinearAlgebra/Transvection/Generation): prove exceptional case in Dieudonné's theorem |
Establish the fourth part of Dieudonné's theorem: is a linear equivalence is exceptional, it
is the product of `finrank K (V ⧸ e.fixedSubmodule)` transvections and one dilatransvection.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #33348
- [ ] depends on: #33347
- [ ] depends on: #33387
- [ ] depends on: #33282
- [ ] depends on: #33392
[](https://gitpod.io/from-referrer/)
|
t-algebra
merge-conflict
label:t-algebra$ |
713/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Center.lean,Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean,Mathlib/LinearAlgebra/Transvection/Basic.lean,Mathlib/LinearAlgebra/Transvection/Generation.lean |
5 |
13 |
['AntoineChambert-Loir', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
nobody |
7-36772 7 days ago |
7-36772 7 days ago |
0-13493 3 hours |
| 37751 |
JovanGerb author:JovanGerb |
chore(Order/Filter/IsBounded): use `to_dual` |
use `to_dual` for `Filter.IsBounded`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37747
[](https://gitpod.io/from-referrer/)
|
tech debt
merge-conflict
|
81/227 |
Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Order/Filter/IsBounded.lean |
2 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
6-68552 6 days ago |
6-70008 6 days ago |
39-1887 39 days |
| 38966 |
smmercuri author:smmercuri |
chore(Algebra): `coe_ringHom` -> `coe_toRingHom` |
---
- [x] depends on: #38950
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
105/64 |
Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/Algebra/Algebra/Hom.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/MvPolynomial/Eval.lean,Mathlib/Algebra/Order/Hom/Ring.lean,Mathlib/Algebra/Polynomial/AlgebraMap.lean,Mathlib/Algebra/Ring/Equiv.lean,Mathlib/AlgebraicGeometry/Morphisms/UniversallyInjective.lean,Mathlib/AlgebraicGeometry/Spec.lean,Mathlib/Data/ZMod/Basic.lean,Mathlib/FieldTheory/Extension.lean,Mathlib/FieldTheory/IsAlgClosed/Basic.lean,Mathlib/FieldTheory/PurelyInseparable/Basic.lean,Mathlib/NumberTheory/Cyclotomic/CyclotomicCharacter.lean,Mathlib/NumberTheory/NumberField/CMField.lean,Mathlib/NumberTheory/NumberField/Ideal/KummerDedekind.lean,Mathlib/NumberTheory/NumberField/InfinitePlace/Ramification.lean,Mathlib/RingTheory/AdjoinRoot.lean,Mathlib/RingTheory/DedekindDomain/Different.lean,Mathlib/RingTheory/DedekindDomain/Instances.lean,Mathlib/RingTheory/FinitePresentation.lean,Mathlib/RingTheory/FractionalIdeal/Operations.lean,Mathlib/RingTheory/GradedAlgebra/AlgHom.lean,Mathlib/RingTheory/GradedAlgebra/RingHom.lean,Mathlib/RingTheory/IntegralClosure/IntegralRestrict.lean,Mathlib/RingTheory/Jacobson/Ring.lean,Mathlib/RingTheory/LocalRing/ResidueField/Ideal.lean,Mathlib/RingTheory/LocalRing/ResidueField/Polynomial.lean,Mathlib/RingTheory/Localization/Basic.lean,Mathlib/RingTheory/Localization/FractionRing.lean,Mathlib/RingTheory/RingHom/StandardSmooth.lean,Mathlib/RingTheory/RingInvo.lean,Mathlib/RingTheory/Smooth/Basic.lean,Mathlib/RingTheory/Trace/Quotient.lean,Mathlib/RingTheory/Unramified/Basic.lean |
35 |
11 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'smmercuri', 'themathqueen'] |
nobody |
6-68484 6 days ago |
6-68484 6 days ago |
5-50769 5 days |
| 37723 |
xgenereux author:xgenereux |
feat(Adjoin/Polynomial/Transcendental): Adjoining transcendental elements |
This PR establishes some basic properties about `A[y]` when `y` is transcendental over `A`. These are mostly just carried over from `A[X]`.
- Move `algEquivOfTranscendental` in the newly created file `Mathlib.RingTheory.Adjoin.Polynomial.Transcendental`
- Add `Algebra.adjoin.evalOfTranscendental`. This is technically very similar to `Algebra.adjoin.liftSingleton` but the definition is much simpler. It is also currently more general in the sense that it doesn't require `A` to be a field.
- Some basic instances from `Polynomial`. Note that these are actually theorems because of the hypothesis `(h : Transcendental R s)` everywhere. I've also added a `Fact` version to allow the possibility of instances.
Last note : I initially considered adding some results in `RingTheory.Polynomial.Quotient` where I golfed the file a tiny bit. I removed the unused results but kept the golf.
AI disclaimer : I used Claude to give me some feedback on the PR.
Co-authored-by: María Inés de Frutos Fernández <[mariaines.dff@gmail.com](mailto:mariaines.dff@gmail.com)>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36439
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
merge-conflict
|
167/70 |
Mathlib.lean,Mathlib/FieldTheory/RatFunc/AsPolynomial.lean,Mathlib/RingTheory/Adjoin/Polynomial/Basic.lean,Mathlib/RingTheory/Adjoin/Polynomial/Bivariate.lean,Mathlib/RingTheory/Adjoin/Polynomial/Transcendental.lean,Mathlib/RingTheory/Algebraic/Basic.lean,Mathlib/RingTheory/Polynomial/Quotient.lean |
7 |
6 |
['github-actions', 'leanprover-radar', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'riccardobrasca'] |
nobody |
5-49828 5 days ago |
5-49829 5 days ago |
42-47075 42 days |
| 37964 |
mortarsanjaya author:mortarsanjaya |
feat(Algebra/Order/Floor): weaken assumptions on theorems about `FloorRing` |
This PR weakens as much assumptions as possible on theorems about `FloorSemiring` and `FloorRing`. Mainly, `IsOrderedRing` and `IsStrictOrderedRing` are weakened to just `IsOrderedAddMonoid` or removed completely from the assumptions on the theorems.
Most theorems can be generalized as is or only requires a minor modification of replacing lemmas about casting naturals/integers preserving order (the likes of `Nat.cast_le`, `Int.cast_lt`, etc.) with the corresponding version for `FloorRing`. Some other lemmas require modification in the proofs, but these changes shorten the proofs. The new proof of the theorem `Int.mul_cast_floor_div_cancel_of_pos` requires an extra import.
The assumption `IsOrderedAddMonoid` is required on lemmas that involve comparison + addition, and `IsOrderedRing` is required only on lemmas that involve comparison + multiplication of two non-integer elements.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37714
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
merge-conflict
label:t-algebra$ |
254/258 |
Mathlib/Algebra/Order/Floor/Defs.lean,Mathlib/Algebra/Order/Floor/Ring.lean,Mathlib/Algebra/Order/Floor/Semiring.lean,Mathlib/Algebra/Order/Round.lean,Mathlib/Data/Int/Log.lean,Mathlib/Data/Rat/Floor.lean,Mathlib/Topology/Algebra/Order/Floor.lean |
7 |
8 |
['github-actions', 'leanprover-radar', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mortarsanjaya'] |
nobody |
5-49827 5 days ago |
5-49828 5 days ago |
43-38369 43 days |
| 39287 |
xgenereux author:xgenereux |
feat(Localization/AtPrime/Basic): upgrade `equivQuotMaximalIdeal` to an AlgEquiv |
The definition [IsLocalization.AtPrime.equivQuotMaximalIdealPow](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/Localization/AtPrime/Basic.html#IsLocalization.AtPrime.equivQuotMaximalIdealPow) was added in #36783.
The case with `n = 1` is still important and interesting. I have upgraded it to an AlgEquiv using `equivQuotMaximalIdealPow`.
This did break a few small things, because we need to bridge back to a `RingEquiv` in some places. I took the liberty to add some missing `apply` lemmas to ease fixing these proofs.
Disclaimer: I used Claude to suggest the first shot and refined it from there.
Co-authored-by: María Inés de Frutos Fernández <[mariaines.dff@gmail.com](mailto:mariaines.dff@gmail.com)>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
merge-conflict
|
45/65 |
Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/Localization/AtPrime/Extension.lean,Mathlib/RingTheory/Trace/Quotient.lean |
3 |
3 |
['github-actions', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
5-49563 5 days ago |
5-49564 5 days ago |
48-25013 48 days |
| 39524 |
FordUniver author:FordUniver |
feat(MeasureTheory/Integral/CurveIntegral): integrability and FTC along a line segment |
Specialises curve integration to the line segment between two points: smoothness of the segment as a `C¹` curve, sufficient conditions for a continuous one-form to be integrable along a segment, and a fundamental-theorem-of-calculus identity for the segment integral of a Fréchet derivative. Adds a new `Segment` section to `AffineMap.lean` that includes some previously existing results.
---
Used by a [planned descent-lemma PR for Lipschitz-smooth functions](https://github.com/FordUniver/mathlib4/blob/5ebc6dae88deb11410d21c0a2628f53c092bb536/Mathlib/Analysis/Calculus/LipschitzSmooth/FDeriv.lean#L133), which needs an FTC along an affine line to integrate a directional derivative over a segment. Three points to highlight:
1. I thought about renaming `curveIntegrable_segment` to `curveIntegrable_segment_iff` for consistency with the file's other `_iff`-suffixed biconditionals, but the new `_const` takes a different name slot, so the rename would be an unnecessary public API break.
2. `Path.segment_contDiffOn` is really a fact about `Path.segment` rather than about curve integration, so it would more naturally live in `Convex/PathConnected.lean`. Unfortunately that target is blocked by a build cycle (`Calculus.AddTorsor.AffineMap` already transitively imports `Convex.PathConnected` via `Convex.Topology`/`Convex.StdSimplex`), so it sits with its consumer here.
3. The new `Continuous{,On}.curveIntegrable_segment` lemmas are the obvious `@[fun_prop]` candidates, but `CurveIntegrable` isn't a registered `fun_prop` concept yet; that registration is a small design call (identity/constant/composition choices, plus tagging the file's pre-existing producers) worth its own focused review and is deferred to a follow-up. `Path.segment_contDiffOn` carries the tag since `ContDiffOn` is already registered.
- [x] depends on: #39206
Diff for the changes *just* in this PR over its predecessor: [link](https://github.com/FordUniver/mathlib4/compare/feat/lineMap-contDiff...feat/curveIntegral-segment-FTC) |
t-measure-probability
merge-conflict
|
51/13 |
Mathlib/MeasureTheory/Integral/CurveIntegral/Basic.lean |
1 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
RemyDegenne assignee:RemyDegenne |
5-47331 5 days ago |
5-47331 5 days ago |
41-32464 41 days |
| 40166 |
felixpernegger author:felixpernegger |
chore: remove all terminal `refine`'s with `exact` |
Found with scripts. This was a pretty exhaustive search and should be almost all of them.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
336/350 |
Archive/Imo/Imo1961Q3.lean,Mathlib/Algebra/Algebra/Subalgebra/Lattice.lean,Mathlib/Algebra/Category/Ring/Limits.lean,Mathlib/Algebra/Category/Ring/Small.lean,Mathlib/Algebra/DualNumber.lean,Mathlib/Algebra/Exact/Basic.lean,Mathlib/Algebra/Group/Pointwise/Finset/Basic.lean,Mathlib/Algebra/GroupWithZero/Range.lean,Mathlib/Algebra/Homology/HomologySequence.lean,Mathlib/Algebra/Lie/Abelian.lean,Mathlib/Algebra/Lie/BaseChange.lean,Mathlib/Algebra/Lie/Prod.lean,Mathlib/Algebra/Module/FinitePresentation.lean,Mathlib/Algebra/Module/Injective.lean,Mathlib/Algebra/Module/LinearMap/FiniteRange.lean,Mathlib/Algebra/Module/LocalizedModule/Basic.lean,Mathlib/Algebra/Module/LocalizedModule/Submodule.lean,Mathlib/Algebra/Module/Submodule/Lattice.lean,Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/MvPolynomial/Division.lean,Mathlib/Algebra/MvPolynomial/Polynomial.lean,Mathlib/Algebra/Order/Archimedean/Basic.lean,Mathlib/Algebra/Polynomial/Roots.lean,Mathlib/Algebra/Polynomial/UnitTrinomial.lean,Mathlib/Algebra/QuadraticAlgebra/Basic.lean,Mathlib/AlgebraicGeometry/AffineTransitionLimit.lean,Mathlib/AlgebraicGeometry/Cover/Sigma.lean,Mathlib/AlgebraicGeometry/Fiber.lean,Mathlib/AlgebraicGeometry/Geometrically/Integral.lean,Mathlib/AlgebraicGeometry/Gluing.lean,Mathlib/AlgebraicGeometry/IdealSheaf/Subscheme.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/AlgebraicGeometry/Morphisms/ClosedImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Finite.lean,Mathlib/AlgebraicGeometry/Morphisms/FlatRank.lean,Mathlib/AlgebraicGeometry/Morphisms/Integral.lean,Mathlib/AlgebraicGeometry/Morphisms/RingHomProperties.lean,Mathlib/AlgebraicGeometry/Morphisms/SurjectiveOnStalks.lean,Mathlib/AlgebraicGeometry/OpenImmersion.lean,Mathlib/AlgebraicGeometry/ProjectiveSpectrum/Scheme.lean,Mathlib/AlgebraicGeometry/Restrict.lean,Mathlib/AlgebraicGeometry/Sites/Small.lean,Mathlib/AlgebraicGeometry/Sites/SmallAffineZariski.lean,Mathlib/AlgebraicGeometry/StructureSheaf.lean,Mathlib/AlgebraicGeometry/ZariskisMainTheorem.lean,Mathlib/AlgebraicTopology/SimplicialSet/NonDegenerateSimplices.lean,Mathlib/Analysis/Analytic/Basic.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Basic.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Isometric.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Restrict.lean,Mathlib/Analysis/Calculus/ContDiff/FTaylorSeries.lean,Mathlib/Analysis/Calculus/FDeriv/Analytic.lean,Mathlib/Analysis/Calculus/FDeriv/Pow.lean,Mathlib/Analysis/Calculus/FDeriv/Symmetric.lean,Mathlib/Analysis/Calculus/UniformLimitsDeriv.lean,Mathlib/Analysis/Complex/Periodic.lean,Mathlib/Analysis/Convex/Segment.lean,Mathlib/Analysis/LocallyConvex/WeakOperatorTopology.lean,Mathlib/Analysis/LocallyConvex/WeakSpace.lean,Mathlib/Analysis/LocallyConvex/WithSeminorms.lean,Mathlib/Analysis/Normed/Affine/AddTorsorBases.lean,Mathlib/Analysis/Normed/Lp/PiLp.lean,Mathlib/Analysis/Normed/Lp/lpSpace.lean,Mathlib/Analysis/Normed/Module/MStructure.lean,Mathlib/Analysis/Seminorm.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Rpow/IntegralRepresentation.lean,Mathlib/Analysis/SpecialFunctions/Elliptic/Weierstrass.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Angle.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/RootsExtrema.lean,Mathlib/CategoryTheory/Abelian/SerreClass/Localization.lean,Mathlib/CategoryTheory/Adhesive/Basic.lean,Mathlib/CategoryTheory/Category/PartialFun.lean,Mathlib/CategoryTheory/EquivalenceRelation.lean,Mathlib/CategoryTheory/Extensive.lean,Mathlib/CategoryTheory/FiberedCategory/Fibered.lean,Mathlib/CategoryTheory/Generator/StrongGenerator.lean,Mathlib/CategoryTheory/Limits/Indization/FilteredColimits.lean,Mathlib/CategoryTheory/Limits/IsLimit.lean,Mathlib/CategoryTheory/Limits/Preserves/Shapes/Products.lean,Mathlib/CategoryTheory/Limits/Shapes/CombinedProducts.lean,Mathlib/CategoryTheory/Limits/VanKampen.lean,Mathlib/CategoryTheory/Monoidal/Closed/Ideal.lean,Mathlib/CategoryTheory/ObjectProperty/LimitsClosure.lean,Mathlib/CategoryTheory/ObjectProperty/Retract.lean,Mathlib/CategoryTheory/ObjectProperty/Shift.lean,Mathlib/CategoryTheory/ObjectProperty/Small.lean,Mathlib/CategoryTheory/PathCategory/MorphismProperty.lean,Mathlib/CategoryTheory/Presentable/Directed.lean,Mathlib/CategoryTheory/Presentable/Type.lean,Mathlib/CategoryTheory/Products/Basic.lean,Mathlib/CategoryTheory/Sites/CompatiblePlus.lean,Mathlib/CategoryTheory/Sites/CoverLifting.lean,Mathlib/CategoryTheory/Sites/Coverage.lean,Mathlib/CategoryTheory/Sites/Hypercover/Saturate.lean,Mathlib/CategoryTheory/Sites/Hypercover/ZeroFamily.lean,Mathlib/CategoryTheory/Sites/Point/Conservative.lean,Mathlib/CategoryTheory/Triangulated/Pretriangulated.lean,Mathlib/Combinatorics/Additive/FreimanHom.lean,Mathlib/Combinatorics/Matroid/Closure.lean,Mathlib/Combinatorics/Matroid/Constructions.lean |
257 |
36 |
['dagurtomas', 'felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts', 'plp127'] |
nobody |
5-47074 5 days ago |
5-47075 5 days ago |
36-42780 36 days |
| 40292 |
felixpernegger author:felixpernegger |
chore: replace `by calc` by `calc` whenever possible |
Avoids unnecessarily going into tactic mode, similar to #40223.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
212/212 |
Archive/Imo/Imo1981Q3.lean,Archive/Imo/Imo1982Q1.lean,Archive/Imo/Imo1982Q3.lean,Archive/Imo/Imo2005Q3.lean,Archive/Imo/Imo2024Q3.lean,Archive/Imo/Imo2025Q3.lean,Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/BigOperators/Group/Finset/Indicator.lean,Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/MvPolynomial/SchwartzZippel.lean,Mathlib/Algebra/Order/Floor/Ring.lean,Mathlib/Algebra/Order/Floor/Semifield.lean,Mathlib/Algebra/Order/Ring/Unbundled/Basic.lean,Mathlib/Algebra/Order/Sub/Defs.lean,Mathlib/Algebra/Polynomial/Coeff.lean,Mathlib/Algebra/Ring/Invertible.lean,Mathlib/Analysis/CStarAlgebra/Module/Defs.lean,Mathlib/Analysis/Calculus/BumpFunction/Normed.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Analysis/Complex/AbelLimit.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/Complex/ValueDistribution/FirstMainTheorem.lean,Mathlib/Analysis/Complex/ValueDistribution/Proximity/Basic.lean,Mathlib/Analysis/Convex/Caratheodory.lean,Mathlib/Analysis/Convex/Continuous.lean,Mathlib/Analysis/Convex/Visible.lean,Mathlib/Analysis/Hofer.lean,Mathlib/Analysis/InnerProductSpace/Defs.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/Matrix/Normed.lean,Mathlib/Analysis/Meromorphic/Divisor.lean,Mathlib/Analysis/Normed/Field/Approximation.lean,Mathlib/Analysis/ODE/DiscreteGronwall.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean,Mathlib/Analysis/SpecialFunctions/Integrals/LogTrigonometric.lean,Mathlib/Analysis/SpecialFunctions/Integrals/PosLogEqCircleAverage.lean,Mathlib/Analysis/SpecialFunctions/JapaneseBracket.lean,Mathlib/Analysis/SpecialFunctions/Log/Base.lean,Mathlib/Analysis/SpecialFunctions/Log/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Stirling.lean,Mathlib/CategoryTheory/Bicategory/Adjunction/Basic.lean,Mathlib/CategoryTheory/Bicategory/Adjunction/Mate.lean,Mathlib/CategoryTheory/Bicategory/NaturalTransformation/Lax.lean,Mathlib/CategoryTheory/Bicategory/NaturalTransformation/Oplax.lean,Mathlib/CategoryTheory/Equivalence.lean,Mathlib/CategoryTheory/Limits/Types/Products.lean,Mathlib/CategoryTheory/Localization/Composition.lean,Mathlib/CategoryTheory/MarkovCategory/Positive.lean,Mathlib/CategoryTheory/Monoidal/DayConvolution.lean,Mathlib/CategoryTheory/Monoidal/Rigid/Basic.lean,Mathlib/Combinatorics/Additive/AP/Three/Behrend.lean,Mathlib/Combinatorics/Additive/Energy.lean,Mathlib/Combinatorics/Additive/ErdosGinzburgZiv.lean,Mathlib/Combinatorics/Additive/SubsetSum.lean,Mathlib/Combinatorics/Additive/VerySmallDoubling.lean,Mathlib/Combinatorics/SetFamily/LYM.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Uniform.lean,Mathlib/Combinatorics/SimpleGraph/Triangle/Removal.lean,Mathlib/Computability/AkraBazzi/AkraBazzi.lean,Mathlib/Computability/AkraBazzi/GrowsPolynomially.lean,Mathlib/Computability/AkraBazzi/SumTransform.lean,Mathlib/Data/Fintype/BigOperators.lean,Mathlib/Data/List/PeriodicityLemma.lean,Mathlib/Data/Nat/Choose/Vandermonde.lean,Mathlib/Data/Nat/Factorial/Basic.lean,Mathlib/Data/Rat/Floor.lean,Mathlib/FieldTheory/Finite/Basic.lean,Mathlib/FieldTheory/Minpoly/IsConjRoot.lean,Mathlib/Geometry/Manifold/Instances/Real.lean,Mathlib/Geometry/Manifold/VectorBundle/CovariantDerivative/Basic.lean,Mathlib/Geometry/Manifold/VectorBundle/Tensoriality.lean,Mathlib/GroupTheory/SpecificGroups/Quaternion.lean,Mathlib/InformationTheory/KullbackLeibler/Basic.lean,Mathlib/LinearAlgebra/AffineSpace/Matrix.lean,Mathlib/LinearAlgebra/Eigenspace/Basic.lean,Mathlib/LinearAlgebra/Matrix/Determinant/Basic.lean,Mathlib/LinearAlgebra/Matrix/Invertible.lean,Mathlib/LinearAlgebra/RootSystem/RootPositive.lean,Mathlib/MeasureTheory/Constructions/HaarToSphere.lean,Mathlib/MeasureTheory/Covering/Vitali.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/Basic.lean,Mathlib/MeasureTheory/Function/LpSeminorm/CompareExp.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Count.lean,Mathlib/MeasureTheory/Integral/Bochner/ContinuousLinearMap.lean,Mathlib/MeasureTheory/Integral/BoundedContinuousFunction.lean,Mathlib/MeasureTheory/Integral/CircleAverage.lean,Mathlib/MeasureTheory/Integral/Gamma.lean,Mathlib/MeasureTheory/Integral/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Integral/MeanInequalities.lean,Mathlib/MeasureTheory/Integral/MeanValue.lean,Mathlib/MeasureTheory/Measure/AddContent.lean,Mathlib/MeasureTheory/Measure/Count.lean,Mathlib/MeasureTheory/Measure/FiniteMeasure.lean,Mathlib/MeasureTheory/Measure/LevyConvergence.lean,Mathlib/MeasureTheory/Measure/LogLikelihoodRatio.lean,Mathlib/MeasureTheory/Measure/PreVariation.lean,Mathlib/NumberTheory/Chebyshev.lean,Mathlib/NumberTheory/FLT/MasonStothers.lean |
140 |
6 |
['github-actions', 'madvorak', 'mathlib-merge-conflicts'] |
nobody |
5-47073 5 days ago |
5-47074 5 days ago |
34-17484 34 days |
| 40964 |
grunweg author:grunweg |
chore: explicitly specify free universes in `TopCat` and friends |
Avoid free universe variables, as discussed on Zulip: https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/.2338223.20The.20Category.20of.20C.5En.20Manifolds/near/587824522
Perhaps, we should have a linter for this, such as by
- extending the `pp_universes` attribute (TODO fix name) to take a list of universes, and only pretty-print those
- the linter checks for any universes which are annotated with this attribute: if a declaration has a universe metavariable corresponding to such a universe, we warn
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
merge-conflict
label:t-algebra$ |
117/114 |
Mathlib/Algebra/Category/ModuleCat/Topology/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Topology/Homology.lean,Mathlib/AlgebraicGeometry/Scheme.lean,Mathlib/AlgebraicGeometry/Spec.lean,Mathlib/RepresentationTheory/Continuous/TopRep.lean,Mathlib/Topology/Specialization.lean,MathlibTest/CategoryTheory/ConcreteCategory/TopModuleCat.lean |
7 |
11 |
['felixpernegger', 'github-actions', 'grunweg', 'leanprover-radar', 'mathlib-merge-conflicts'] |
nobody |
5-46818 5 days ago |
5-46819 5 days ago |
17-81069 17 days |
| 41015 |
JovanGerb author:JovanGerb |
chore(CategoryTheory/Functor/EpiMono): use `to_dual` |
This PR uses `to_dual` to translate some declarations about `Epimorphisms` and `Monomorphisms`. Various prerequisites have also been tagged in this PR.
The namespace of some lemmas has been fixed that should have been capitalized.
A few lemmas about `Epimorphisms` didn't have a corresponding `Monomorphisms` version, so they have been added in this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
139/226 |
Mathlib/CategoryTheory/Adjunction/Basic.lean,Mathlib/CategoryTheory/EpiMono.lean,Mathlib/CategoryTheory/Functor/EpiMono.lean,Mathlib/CategoryTheory/Functor/FullyFaithful.lean,Mathlib/CategoryTheory/LiftingProperties/Adjunction.lean,Mathlib/CategoryTheory/Preadditive/Injective/Basic.lean,Mathlib/CategoryTheory/Preadditive/Projective/Internal.lean,Mathlib/Tactic/Translate/ToDual.lean |
8 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
5-43665 5 days ago |
5-43665 5 days ago |
21-39639 21 days |
| 41564 |
felixpernegger author:felixpernegger |
chore: unexpose public sections with no defs |
This PR remove `@[expose]` from public sections when there are no `(irredcible_)def`'s inside the section anyways, so there is no reason to expose the section (does not make a difference).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
merge-conflict
|
147/147 |
Mathlib/Algebra/Category/ModuleCat/ChangeOfRingsExact.lean,Mathlib/Algebra/Category/ModuleCat/Ext/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Adjunction.lean,Mathlib/Algebra/Category/Ring/Small.lean,Mathlib/Algebra/Field/Basic.lean,Mathlib/Algebra/Field/MinimalAxioms.lean,Mathlib/Algebra/Field/Opposite.lean,Mathlib/Algebra/Field/Rat.lean,Mathlib/Algebra/Field/ULift.lean,Mathlib/Algebra/Field/ZMod.lean,Mathlib/Algebra/Group/Action/Option.lean,Mathlib/Algebra/Group/Action/Sigma.lean,Mathlib/Algebra/Group/Action/Sum.lean,Mathlib/Algebra/Group/Action/Units.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Group/Submonoid/MulAction.lean,Mathlib/Algebra/HierarchyDesign.lean,Mathlib/Algebra/Homology/ModelCategory/Injective.lean,Mathlib/Algebra/Module/Projective.lean,Mathlib/Algebra/Module/Submodule/Basic.lean,Mathlib/Algebra/MonoidAlgebra/PointwiseSMul.lean,Mathlib/Algebra/NonAssoc/LieAdmissible/Defs.lean,Mathlib/Algebra/Notation/Pi/Defs.lean,Mathlib/Algebra/Notation/Prod.lean,Mathlib/Algebra/Order/Antidiag/Tendsto.lean,Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Algebra/Order/Floor/Div.lean,Mathlib/Algebra/Order/Group/Action/End.lean,Mathlib/Algebra/Order/Group/End.lean,Mathlib/Algebra/Order/Group/PosPart.lean,Mathlib/Algebra/Order/Kleene.lean,Mathlib/Algebra/Order/Nonneg/Lattice.lean,Mathlib/Algebra/Order/Pi.lean,Mathlib/Algebra/Order/Ring/Unbundled/Rat.lean,Mathlib/Algebra/Ring/Commute.lean,Mathlib/Algebra/Star/TransferInstance.lean,Mathlib/AlgebraicGeometry/Birational/Dominant.lean,Mathlib/AlgebraicTopology/ModelCategory/Over.lean,Mathlib/AlgebraicTopology/SimplicialSet/AnodyneExtensions/Inner/PushoutProduct.lean,Mathlib/AlgebraicTopology/SimplicialSet/AnodyneExtensions/PushoutProduct.lean,Mathlib/Analysis/Calculus/TaylorIntegral.lean,Mathlib/Analysis/InnerProductSpace/Coalgebra.lean,Mathlib/Analysis/Normed/Algebra/TrivSqZeroExt.lean,Mathlib/Analysis/Normed/Group/Constructions.lean,Mathlib/Analysis/Normed/Module/MStructure.lean,Mathlib/Analysis/Normed/Operator/Compact/FiniteDimension.lean,Mathlib/Analysis/ODE/DiscreteGronwall.lean,Mathlib/Analysis/ODE/ExistUnique.lean,Mathlib/Analysis/Polynomial/Norm.lean,Mathlib/CategoryTheory/Adjunction/ParametrizedLimits.lean,Mathlib/CategoryTheory/Comma/CatCommSq.lean,Mathlib/CategoryTheory/Localization/DerivabilityStructure/OfLocalizedEquivalences.lean,Mathlib/CategoryTheory/MarkovCategory/Positive.lean,Mathlib/CategoryTheory/Monoidal/Cartesian/Normal.lean,Mathlib/CategoryTheory/Monoidal/Functor/Types.lean,Mathlib/CategoryTheory/Monoidal/Types/Coyoneda.lean,Mathlib/CategoryTheory/MorphismProperty/LocalClosure.lean,Mathlib/CategoryTheory/Preadditive/Comma.lean,Mathlib/CategoryTheory/Preadditive/Injective/InjectiveObject.lean,Mathlib/CategoryTheory/Sites/CoversTop/Over.lean,Mathlib/CategoryTheory/Sites/Precoverage/Generates.lean,Mathlib/Combinatorics/Additive/FreimanHom.lean,Mathlib/Computability/AkraBazzi/AkraBazzi.lean,Mathlib/Data/ENNReal/Action.lean,Mathlib/Data/ENat/Pow.lean,Mathlib/Data/Finsupp/Pointwise.lean,Mathlib/Data/Finsupp/PointwiseSMul.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/FunLike/Embedding.lean,Mathlib/Data/FunLike/Equiv.lean,Mathlib/Data/FunLike/Ring.lean,Mathlib/Data/Int/Cast/Pi.lean,Mathlib/Data/LawfulXor.lean,Mathlib/Data/List/Monad.lean,Mathlib/Data/Prod/Lex.lean,Mathlib/Data/Rat/Cast/Defs.lean,Mathlib/Data/Rat/Cast/OfScientific.lean,Mathlib/Data/Sigma/Order.lean,Mathlib/Data/ZMod/IntUnitsPower.lean,Mathlib/GroupTheory/Congruence/Star.lean,Mathlib/GroupTheory/GroupAction/Embedding.lean,Mathlib/GroupTheory/IsPerfect.lean,Mathlib/GroupTheory/ResiduallyFinite.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Star.lean,Mathlib/LinearAlgebra/Matrix/GeneralLinearGroup/MvPolynomial.lean,Mathlib/LinearAlgebra/Matrix/HadamardMatrix.lean,Mathlib/LinearAlgebra/Projectivization/PSL/PSL2.lean,Mathlib/LinearAlgebra/RootSystem/GeckConstruction/Semisimple.lean,Mathlib/MeasureTheory/Function/L2Space.lean,Mathlib/MeasureTheory/Function/LpSpace/CompleteOfCompleteLp.lean,Mathlib/MeasureTheory/Integral/IntegralEqImproper.lean,Mathlib/MeasureTheory/Measure/Sub.lean,Mathlib/MeasureTheory/Measure/Typeclasses/ZeroOne.lean,Mathlib/MeasureTheory/VectorMeasure/SetIntegral.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Summable.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Transform.lean,Mathlib/NumberTheory/NumberField/ExistsRamified.lean,Mathlib/NumberTheory/Padics/PadicVal/Defs.lean,Mathlib/NumberTheory/RamificationInertia/Valuation.lean,Mathlib/Order/ConditionallyCompleteLattice/Basic.lean |
147 |
8 |
['JovanGerb', 'felixpernegger', 'github-actions', 'grunweg', 'mathlib-merge-conflicts', 'themathqueen'] |
JovanGerb assignee:JovanGerb |
5-43276 5 days ago |
5-43277 5 days ago |
6-56356 6 days |
| 36275 |
smmercuri author:smmercuri |
feat: norm for the finite adele ring of a number field |
---
- [x] depends on: #35820
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
143/1 |
Mathlib.lean,Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean,Mathlib/NumberTheory/NumberField/FiniteAdeleRing.lean,Mathlib/RingTheory/DedekindDomain/FiniteAdeleRing.lean,Mathlib/Topology/Algebra/Valued/NormedValued.lean |
5 |
5 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
4-80924 4 days ago |
4-80925 4 days ago |
56-18547 56 days |
| 38190 |
AntoineChambert-Loir author:AntoineChambert-Loir |
refactor(Topology/Sion): use a dense and continuous completion to generalize the statements |
Use the existence of a dense and continuous completion to simplify the final part of the proof of Sion's theorem.
As a matter of fact, only an early lemma needs to be modified and the rest holds in weaker assumptions,
leading to a serious simplification.
Since the PR proving Sion is very recent and unused, we didn't add deprecation lemmas.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #37939
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
51/125 |
Mathlib/Order/Completion.lean,Mathlib/Topology/Sion.lean |
2 |
12 |
['AntoineChambert-Loir', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
4-79515 4 days ago |
4-79516 4 days ago |
39-245 39 days |
| 40381 |
felixpernegger author:felixpernegger |
chore: replace `:= by rfl` with `:= rfl` |
Continuation of #40371.
This PR replace `:= by rfl` with `:= rfl` whenever possible (also if the `rfl` is on the next line). This ought to make `dsimp` a little bit better as well.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
253/460 |
Archive/Imo/Imo2010Q5.lean,Mathlib/Algebra/Algebra/NonUnitalHom.lean,Mathlib/Algebra/Category/Grp/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Monoidal.lean,Mathlib/Algebra/Category/MonCat/Basic.lean,Mathlib/Algebra/Category/Ring/Constructions.lean,Mathlib/Algebra/Colimit/DirectLimit.lean,Mathlib/Algebra/DirectSum/Finsupp.lean,Mathlib/Algebra/DirectSum/Module.lean,Mathlib/Algebra/DirectSum/Ring.lean,Mathlib/Algebra/Group/AddChar.lean,Mathlib/Algebra/Group/Subgroup/Defs.lean,Mathlib/Algebra/GroupWithZero/ProdHom.lean,Mathlib/Algebra/Homology/HomotopyCategory/HomComplex.lean,Mathlib/Algebra/Homology/ShortComplex/LeftHomology.lean,Mathlib/Algebra/Homology/Single.lean,Mathlib/Algebra/Lie/Basic.lean,Mathlib/Algebra/Lie/Cochain.lean,Mathlib/Algebra/Lie/Extension.lean,Mathlib/Algebra/Lie/OfAssociative.lean,Mathlib/Algebra/Lie/Submodule.lean,Mathlib/Algebra/Lie/Weights/Basic.lean,Mathlib/Algebra/Order/Hom/MonoidWithZero.lean,Mathlib/Algebra/Order/Hom/Ring.lean,Mathlib/Algebra/Order/Module/PositiveLinearMap.lean,Mathlib/Algebra/Polynomial/AlgebraMap.lean,Mathlib/Algebra/Polynomial/Coeff.lean,Mathlib/Algebra/Polynomial/Derivation.lean,Mathlib/Algebra/Polynomial/Module/Basic.lean,Mathlib/Algebra/Polynomial/Sequence.lean,Mathlib/Algebra/Ring/Hom/Defs.lean,Mathlib/Algebra/Star/NonUnitalSubalgebra.lean,Mathlib/Algebra/Vertex/HVertexOperator.lean,Mathlib/Algebra/Vertex/VertexOperator.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Point.lean,Mathlib/AlgebraicGeometry/Modules/Sheaf.lean,Mathlib/AlgebraicTopology/SimplexCategory/Rev.lean,Mathlib/AlgebraicTopology/SimplicialSet/Homotopy.lean,Mathlib/AlgebraicTopology/SimplicialSet/StdSimplex.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Asymptotics/ExpGrowth.lean,Mathlib/Analysis/CStarAlgebra/GelfandDuality.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/Distribution/ContDiffMapSupportedIn.lean,Mathlib/Analysis/Distribution/Distribution.lean,Mathlib/Analysis/Distribution/FourierMultiplier.lean,Mathlib/Analysis/Distribution/SchwartzSpace/Basic.lean,Mathlib/Analysis/Distribution/SchwartzSpace/Fourier.lean,Mathlib/Analysis/Distribution/TemperedDistribution.lean,Mathlib/Analysis/Fourier/Convolution.lean,Mathlib/Analysis/Normed/Affine/Isometry.lean,Mathlib/Analysis/Normed/Group/Seminorm.lean,Mathlib/Analysis/Normed/Module/Span.lean,Mathlib/Analysis/SpecialFunctions/Complex/CircleAddChar.lean,Mathlib/Analysis/SpecialFunctions/Stirling.lean,Mathlib/CategoryTheory/Distributive/Monoidal.lean,Mathlib/CategoryTheory/Limits/Presheaf.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/Cospan.lean,Mathlib/CategoryTheory/Limits/Types/Equalizers.lean,Mathlib/CategoryTheory/Limits/Types/Products.lean,Mathlib/CategoryTheory/Monoidal/Braided/Multifunctor.lean,Mathlib/CategoryTheory/Monoidal/Closed/Basic.lean,Mathlib/CategoryTheory/Monoidal/Comon_.lean,Mathlib/CategoryTheory/Monoidal/Mod.lean,Mathlib/CategoryTheory/MorphismProperty/OfObjectProperty.lean,Mathlib/CategoryTheory/Shift/CommShift.lean,Mathlib/CategoryTheory/Shift/ShiftedHomOpposite.lean,Mathlib/CategoryTheory/Sites/IsSheafFor.lean,Mathlib/CategoryTheory/Subfunctor/SubmonoidFunctor.lean,Mathlib/CategoryTheory/Yoneda.lean,Mathlib/Combinatorics/Enumerative/Stirling.lean,Mathlib/Combinatorics/SimpleGraph/Maps.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean,Mathlib/Computability/AkraBazzi/AkraBazzi.lean,Mathlib/Computability/AkraBazzi/SumTransform.lean,Mathlib/Data/Fin/VecNotation.lean,Mathlib/Data/Matrix/Basic.lean,Mathlib/Data/Nat/Factorization/PrimePow.lean,Mathlib/Data/PFunctor/Multivariate/Basic.lean,Mathlib/Data/Real/Embedding.lean,Mathlib/Data/Rel.lean,Mathlib/Data/Seq/Basic.lean,Mathlib/Data/Set/FiniteExhaustion.lean,Mathlib/Data/Set/Lattice.lean,Mathlib/Data/Set/Pairwise/Lattice.lean,Mathlib/Data/Subtype.lean,Mathlib/Geometry/Euclidean/Volume/Measure.lean,Mathlib/Geometry/Manifold/Bordism.lean,Mathlib/Geometry/Manifold/IsManifold/ExtChartAt.lean,Mathlib/Geometry/Polygon/Basic.lean,Mathlib/GroupTheory/Coxeter/Basic.lean,Mathlib/GroupTheory/FiniteIndexNormalSubgroup.lean,Mathlib/GroupTheory/FreeGroup/Orbit.lean,Mathlib/GroupTheory/GroupAction/ConjAct.lean,Mathlib/GroupTheory/GroupAction/Hom.lean,Mathlib/GroupTheory/SpecificGroups/Alternating.lean,Mathlib/GroupTheory/SpecificGroups/Quaternion.lean,Mathlib/LinearAlgebra/AffineSpace/Simplex/Basic.lean |
170 |
21 |
['dagurtomas', 'felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts', 'tb65536'] |
dagurtomas assignee:dagurtomas |
4-22860 4 days ago |
4-22861 4 days ago |
31-7615 31 days |
| 40425 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/MeasurableSpace/Constructions): remove defEq abuse |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
large-import
merge-conflict
|
11/7 |
Mathlib/Data/ENat/Basic.lean,Mathlib/MeasureTheory/MeasurableSpace/Constructions.lean |
2 |
4 |
['felixpernegger', 'github-actions', 'mathlib-merge-conflicts'] |
urkud assignee:urkud |
4-22735 4 days ago |
4-22736 4 days ago |
38-52262 38 days |
| 41481 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Connectivity/Connected): a preconnected graph with finitely many edges has finitely many vertices |
`Finite V ↔ Finite G.Dart ↔ G.support.Finite ↔ G.edgeSet.Finite`
---
`#G.Dart = 2 * #G.edgeSet` is also true (#36406) which could simplify the `edgeSet` proof, but it's in `DegreeSum.lean` and more complicated. Having `Finite` theorems seems useful.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
merge-conflict
|
80/0 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/Dart.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
4 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
1-70021 1 day ago |
1-70022 1 day ago |
12-43183 12 days |
| 41625 |
felixpernegger author:felixpernegger |
chore: remove unused `haveI` and `letI` |
This PR removes all `haveI/letI` in proofs of theorems when they are actually redundant/unused. (like 11% of total) Excludes MathlibTest.
Note this PR does not touch any abbrevs/defs/instances yet (even Prop valued fields of those), to make it a bit safer we arent accidentally changing something.
Note: Most of these are now `have/let` and no longer `haveI/letI` which is due to #41708. But all removals here are disjoint from #41749.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
5/362 |
Mathlib/Algebra/Algebra/Subalgebra/Rank.lean,Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Adjunction.lean,Mathlib/Algebra/CharP/LocalRing.lean,Mathlib/Algebra/EuclideanDomain/Basic.lean,Mathlib/Algebra/EuclideanDomain/Defs.lean,Mathlib/Algebra/Homology/HomotopyCofiber.lean,Mathlib/Algebra/Order/GroupWithZero/Bounds.lean,Mathlib/Algebra/Squarefree/Basic.lean,Mathlib/AlgebraicGeometry/EllipticCurve/IsomOfJ.lean,Mathlib/AlgebraicGeometry/Normalization.lean,Mathlib/AlgebraicGeometry/Properties.lean,Mathlib/AlgebraicGeometry/SpreadingOut.lean,Mathlib/AlgebraicGeometry/StructureSheaf.lean,Mathlib/AlgebraicGeometry/ValuativeCriterion.lean,Mathlib/Analysis/Calculus/SmoothSeries.lean,Mathlib/Analysis/Convex/StdSimplex.lean,Mathlib/Analysis/Hofer.lean,Mathlib/Analysis/InnerProductSpace/Projection/FiniteDimensional.lean,Mathlib/Analysis/InnerProductSpace/l2Space.lean,Mathlib/Analysis/Normed/Module/FiniteDimension.lean,Mathlib/Analysis/Normed/Operator/Banach.lean,Mathlib/Analysis/Normed/Order/UpperLower.lean,Mathlib/Analysis/Normed/Unbundled/FiniteExtension.lean,Mathlib/Analysis/Seminorm.lean,Mathlib/CategoryTheory/Abelian/Basic.lean,Mathlib/CategoryTheory/Abelian/GrothendieckAxioms/Basic.lean,Mathlib/CategoryTheory/Abelian/Transfer.lean,Mathlib/CategoryTheory/Adjunction/Reflective.lean,Mathlib/CategoryTheory/Comma/Final.lean,Mathlib/CategoryTheory/Functor/Flat.lean,Mathlib/CategoryTheory/Galois/EssSurj.lean,Mathlib/CategoryTheory/Galois/Examples.lean,Mathlib/CategoryTheory/Galois/Topology.lean,Mathlib/CategoryTheory/Groupoid/Basic.lean,Mathlib/CategoryTheory/Limits/ConeCategory.lean,Mathlib/CategoryTheory/Limits/Constructions/WeaklyInitial.lean,Mathlib/CategoryTheory/Limits/FunctorCategory/Basic.lean,Mathlib/CategoryTheory/Limits/HasLimits.lean,Mathlib/CategoryTheory/Limits/Preserves/Finite.lean,Mathlib/CategoryTheory/Limits/Shapes/Images.lean,Mathlib/CategoryTheory/Limits/Shapes/StrictInitial.lean,Mathlib/CategoryTheory/Limits/VanKampen.lean,Mathlib/CategoryTheory/Localization/Adjunction.lean,Mathlib/CategoryTheory/Localization/CalculusOfFractions.lean,Mathlib/CategoryTheory/Localization/SmallHom.lean,Mathlib/CategoryTheory/Sites/Sheaf.lean,Mathlib/Combinatorics/Additive/ErdosGinzburgZiv.lean,Mathlib/Data/Multiset/ZeroCons.lean,Mathlib/Data/Nat/Totient.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/ChevalleyWarning.lean,Mathlib/FieldTheory/Differential/Basic.lean,Mathlib/FieldTheory/Extension.lean,Mathlib/FieldTheory/Galois/Abelian.lean,Mathlib/FieldTheory/IntermediateField/Adjoin/Algebra.lean,Mathlib/FieldTheory/IntermediateField/Algebraic.lean,Mathlib/FieldTheory/KummerExtension.lean,Mathlib/FieldTheory/LinearDisjoint.lean,Mathlib/FieldTheory/PolynomialGaloisGroup.lean,Mathlib/FieldTheory/PurelyInseparable/Basic.lean,Mathlib/FieldTheory/PurelyInseparable/PerfectClosure.lean,Mathlib/FieldTheory/PurelyInseparable/Tower.lean,Mathlib/FieldTheory/Separable.lean,Mathlib/FieldTheory/SeparableDegree.lean,Mathlib/Geometry/Euclidean/NinePointCircle.lean,Mathlib/Geometry/Manifold/IsManifold/ExtChartAt.lean,Mathlib/Geometry/Manifold/WhitneyEmbedding.lean,Mathlib/GroupTheory/Schreier.lean,Mathlib/GroupTheory/SpecificGroups/Quaternion.lean,Mathlib/LinearAlgebra/AffineSpace/FiniteDimensional.lean,Mathlib/LinearAlgebra/Basis/VectorSpace.lean,Mathlib/LinearAlgebra/BilinearForm/DualLattice.lean,Mathlib/LinearAlgebra/DFinsupp.lean,Mathlib/LinearAlgebra/Dimension/Finite.lean,Mathlib/LinearAlgebra/Dimension/RankNullity.lean,Mathlib/LinearAlgebra/Dimension/StrongRankCondition.lean,Mathlib/LinearAlgebra/Dual/Lemmas.lean,Mathlib/LinearAlgebra/FiniteDimensional/Basic.lean,Mathlib/LinearAlgebra/FiniteDimensional/Lemmas.lean,Mathlib/LinearAlgebra/Finsupp/LinearCombination.lean,Mathlib/LinearAlgebra/Finsupp/Supported.lean,Mathlib/LinearAlgebra/FreeModule/Determinant.lean,Mathlib/LinearAlgebra/FreeModule/PID.lean,Mathlib/LinearAlgebra/LinearDisjoint.lean,Mathlib/LinearAlgebra/LinearIndependent/Basic.lean,Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean,Mathlib/LinearAlgebra/Matrix/Basis.lean,Mathlib/LinearAlgebra/Matrix/Block.lean,Mathlib/LinearAlgebra/Matrix/GeneralLinearGroup/Defs.lean,Mathlib/LinearAlgebra/Matrix/Irreducible/Defs.lean,Mathlib/LinearAlgebra/Matrix/NonsingularInverse.lean,Mathlib/LinearAlgebra/Matrix/ToLin.lean,Mathlib/LinearAlgebra/Multilinear/FiniteDimensional.lean,Mathlib/LinearAlgebra/QuadraticForm/Basic.lean,Mathlib/LinearAlgebra/RootSystem/GeckConstruction/Lemmas.lean,Mathlib/Logic/Nontrivial/Basic.lean,Mathlib/MeasureTheory/Constructions/BorelSpace/Order.lean,Mathlib/MeasureTheory/Covering/Differentiation.lean,Mathlib/MeasureTheory/Function/AEEqOfIntegral.lean |
175 |
26 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-merge-conflicts', 'plp127'] |
nobody |
1-69893 1 day ago |
1-69894 1 day ago |
8-41831 8 days |
| 41815 |
felixpernegger author:felixpernegger |
chore: remove redundant brackets |
Remove redundant `()` brackets. This is pretty minor, but still a strict style improvement, so I PR it
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
1021/1021 |
Archive/Imo/Imo1982Q1.lean,Archive/Imo/Imo2024Q5.lean,Archive/Imo/Imo2025Q3.lean,Counterexamples/DiscreteTopologyNonDiscreteUniformity.lean,Counterexamples/NowhereDifferentiable.lean,Counterexamples/TopologistsSineCurve.lean,Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Algebra/Subalgebra/MulOpposite.lean,Mathlib/Algebra/BigOperators/Group/List/Defs.lean,Mathlib/Algebra/Category/BoolRing.lean,Mathlib/Algebra/Category/Grp/Adjunctions.lean,Mathlib/Algebra/Category/Grp/Preadditive.lean,Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Free.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Submodule.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Abelian.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/LocallyFree.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Quasicoherent.lean,Mathlib/Algebra/Category/Ring/Basic.lean,Mathlib/Algebra/CharZero/Defs.lean,Mathlib/Algebra/Field/Subfield/Defs.lean,Mathlib/Algebra/FreeMonoid/Count.lean,Mathlib/Algebra/Group/Center.lean,Mathlib/Algebra/Group/End.lean,Mathlib/Algebra/Group/Even.lean,Mathlib/Algebra/Group/Subgroup/Order.lean,Mathlib/Algebra/Group/Submonoid/Operations.lean,Mathlib/Algebra/Group/Submonoid/Units.lean,Mathlib/Algebra/Group/TypeTags/Basic.lean,Mathlib/Algebra/Group/Units/Hom.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/ExactSequences.lean,Mathlib/Algebra/Homology/DerivedCategory/ShortExact.lean,Mathlib/Algebra/Homology/Embedding/AreComplementary.lean,Mathlib/Algebra/Homology/Embedding/Basic.lean,Mathlib/Algebra/Homology/Embedding/CochainComplex.lean,Mathlib/Algebra/Homology/HomotopyCategory/Plus.lean,Mathlib/Algebra/Homology/HomotopyFiber.lean,Mathlib/Algebra/Homology/ShortComplex/Abelian.lean,Mathlib/Algebra/Homology/ShortComplex/Basic.lean,Mathlib/Algebra/Homology/ShortComplex/ConcreteCategory.lean,Mathlib/Algebra/Homology/ShortComplex/Exact.lean,Mathlib/Algebra/Homology/ShortComplex/ExactFunctor.lean,Mathlib/Algebra/Homology/ShortComplex/Homology.lean,Mathlib/Algebra/Homology/ShortComplex/RightHomology.lean,Mathlib/Algebra/Lie/Ideal.lean,Mathlib/Algebra/Lie/LieTheorem.lean,Mathlib/Algebra/Lie/SemiDirect.lean,Mathlib/Algebra/Module/Equiv/Defs.lean,Mathlib/Algebra/Module/Presentation/Basic.lean,Mathlib/Algebra/Module/Presentation/Differentials.lean,Mathlib/Algebra/Module/SpanRank.lean,Mathlib/Algebra/Module/Submodule/Invariant.lean,Mathlib/Algebra/Module/Torsion/Basic.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/Order/Antidiag/Finsupp.lean,Mathlib/Algebra/Order/Antidiag/Nat.lean,Mathlib/Algebra/Order/Antidiag/Pi.lean,Mathlib/Algebra/Order/GroupWithZero/Lex.lean,Mathlib/Algebra/Order/GroupWithZero/Range.lean,Mathlib/Algebra/Order/Module/HahnEmbedding.lean,Mathlib/Algebra/Order/Monoid/Lex.lean,Mathlib/Algebra/Order/Positive/Ring.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/Algebra/Polynomial/Degree/Lemmas.lean,Mathlib/Algebra/QuadraticAlgebra/Basic.lean,Mathlib/Algebra/Quandle.lean,Mathlib/Algebra/Quaternion.lean,Mathlib/Algebra/Ring/Ext.lean,Mathlib/Algebra/Ring/Subring/Basic.lean,Mathlib/Algebra/Ring/Subring/MulOpposite.lean,Mathlib/Algebra/Ring/Subsemiring/Basic.lean,Mathlib/Algebra/Ring/Subsemiring/MulOpposite.lean,Mathlib/Algebra/Ring/ULift.lean,Mathlib/Algebra/SkewMonoidAlgebra/Basic.lean,Mathlib/Algebra/SkewPolynomial/Basic.lean,Mathlib/Algebra/Star/CentroidHom.lean,Mathlib/Algebra/Torsor/Basic.lean,Mathlib/Algebra/TrivSqZeroExt/Basic.lean,Mathlib/AlgebraicGeometry/AffineScheme.lean,Mathlib/AlgebraicGeometry/AffineTransitionLimit.lean,Mathlib/AlgebraicGeometry/Birational/RationalMap.lean,Mathlib/AlgebraicGeometry/EffectiveEpi.lean,Mathlib/AlgebraicGeometry/FunctionField.lean,Mathlib/AlgebraicGeometry/GammaSpecAdjunction.lean,Mathlib/AlgebraicGeometry/Gluing.lean,Mathlib/AlgebraicGeometry/IdealSheaf/Basic.lean,Mathlib/AlgebraicGeometry/IdealSheaf/Functorial.lean,Mathlib/AlgebraicGeometry/Limits.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/AlgebraicGeometry/Morphisms/Affine.lean,Mathlib/AlgebraicGeometry/Morphisms/AffineAnd.lean,Mathlib/AlgebraicGeometry/Morphisms/ClosedImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Finite.lean,Mathlib/AlgebraicGeometry/Morphisms/Flat.lean,Mathlib/AlgebraicGeometry/Morphisms/Immersion.lean,Mathlib/AlgebraicGeometry/Morphisms/IsIso.lean,Mathlib/AlgebraicGeometry/Morphisms/QuasiCompact.lean,Mathlib/AlgebraicGeometry/Morphisms/QuasiFinite.lean,Mathlib/AlgebraicGeometry/Morphisms/RingHomProperties.lean |
658 |
8 |
['SnirBroshi', 'felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
1-69766 1 day ago |
1-69767 1 day ago |
3-45253 3 days |
| 40616 |
kim-em author:kim-em |
feat(AlgebraicGeometry/Group): add Jacobian blueprint via def_wanted/theorem_wanted |
This PR adds a blueprint of the Jacobian of a smooth, proper, geometrically irreducible curve over a field, expressed entirely through the new `def_wanted` / `theorem_wanted` / `instance_wanted` placeholder declarations. Each dependency between the wanted declarations is recorded through the `❰…❱` bracket syntax, so the placeholder types can refer to each other, without polluting the environment with `sorry` or `axiom`.
The file is adapted from Christian Merten's `JacobianChallenge.lean` in the lean-eval repository.
I hope that we will consider this as a way of "pre-reviewing" design level work for Mathlib. It should encourage contributors to fill in details, and they will know that the implementation work is desirable. It should allow us to speed up review, as if the characterisation in the design PR has already been approved it is relatively easier (or at least, a narrower problem) to review an implementation PR.
🤖 Prepared with Claude Code |
t-algebraic-geometry
merge-conflict
|
98/1 |
Mathlib.lean,Mathlib/AlgebraicGeometry/Group/Jacobian.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean |
3 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
riccardobrasca assignee:riccardobrasca |
0-66584 18 hours ago |
0-66585 18 hours ago |
36-55346 36 days |
| 41748 |
j2d9w5xtjn-png author:j2d9w5xtjn-png |
feat(Counterexamples): a finite free group scheme of order four not killed by four |
This PR adds a `Counterexamples/` file resolving a question of Grothendieck in the negative.
## Statement
Grothendieck asked whether a finite locally free group scheme of order `n` is killed by `n`. Deligne proved this holds for **commutative** group schemes. This file gives a counterexample in the non-commutative case.
Over the base ring `R = ℤ[a, b] / (a³, b³, a²b + 2)`, the coordinate algebra
A = R[U, V] / (U² − abU + b²V, V² − a²V)
is a Hopf algebra, finite free of rank four over `R`, whose associated affine group scheme has order four but is **not killed by four**. Concretely, the fourth convolution power of the identity is not the convolution unit:
`Counterexample.GrothendieckPower.counterexample :
Nontrivial R ∧ Module.Free R A ∧ Module.Finite R A ∧ Module.finrank R A = 4 ∧
powerMap 4 ≠ (Algebra.ofId R A).comp counit`
## Background
- **Grothendieck's question**: is a finite locally free group scheme of order `n` killed by `n`? (Recorded as open in Tate, *Finite flat group schemes*, §3.8.)
- **Deligne's theorem**: yes for commutative group schemes (Oort–Tate, *Group schemes of prime order*, §1).
- This construction answers the general (non-commutative) question negatively.
## Proof sketch
1. The base ring `R` has `2b ≠ 0`; this is certified by an explicit faithful `R`-module `M = ℤ/4 × ℤ/4 × (ℤ/2)⁵` with `a`, `b` acting by explicit additive endomorphisms.
2. `A` is built as two nested `QuadraticAlgebra`s, hence finite free of rank four.
3. With `lambda = (1 + aU)(1 + bV)`, one checks `lambda` is group-like and the given `Δ(U)`, `Δ(V)` extend to a bialgebra comultiplication.
4. `powerMap n` sends `U` to `(1 + lambda + ⋯ + lambdaⁿ⁻¹)·U`; at `n = 4` this is `2bUV ≠ 0`.
5. The eighth power map is the convolution unit, so the seventh gives an antipode: `A` is a Hopf algebra of order four not killed by four. (Consistency with Deligne: `A` is not cocommutative — `not_isCocomm`.)
## Disclosure
As stated in the module docstring, and per mathlib policy: the construction of this group scheme and its formalization were carried out with the AI assistants Codex (OpenAI) and Claude (Anthropic), under the direction of the author, who takes responsibility for the contribution.
---
- [ ] depends on: #40500
Once #40500 (affine group scheme ↔ Hopf algebra correspondence) lands, the group-scheme formulation can be restated through that API for a cleaner statement.
|
LLM-generated
new-contributor
merge-conflict
|
1648/1 |
Counterexamples.lean,Counterexamples/GrothendieckPower.lean,Mathlib.lean,Mathlib/Algebra/QuadraticAlgebra/Basic.lean,Mathlib/AlgebraicGeometry/Group/Affine.lean,Mathlib/AlgebraicGeometry/Scheme.lean,Mathlib/RingTheory/Bialgebra/TensorProduct.lean,Mathlib/RingTheory/TensorProduct/Maps.lean,docs/references.bib |
9 |
66 |
['bwangpj', 'eric-wieser', 'github-actions', 'j2d9w5xtjn-png', 'kbuzzard', 'kim-em', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'metakunt', 'riccardobrasca'] |
nobody |
0-64560 17 hours ago |
0-64561 17 hours ago |
0-49476 13 hours |
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Updated |
Last status change |
total time in review |
| 14563 |
awueth author:awueth |
feat: if-then-else of exclusive or statement |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks, and is labeled with `awaiting-review`.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
If `¬(P ∧ Q)` then `ite (P ∨ Q) a 1 = (ite P a 1) * (ite Q a 1)`
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
5/0 |
Mathlib/Algebra/Group/Basic.lean |
1 |
3 |
['eric-wieser', 'github-actions', 'kim-em'] |
nobody |
706-16066 1 year ago |
736-63048 736 days ago |
6-38745 6 days |
| 12751 |
Command-Master author:Command-Master |
feat: add lemmas for Nat/Bits, Nat/Bitwise and Nat/Size |
Remove `@[simp]` from `Nat.bit_false` and `Nat.bit_true`, as `bit0` and `bit1` are deprecated, and add some lemmas to `Bits`, `Bitwise` and `Size`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
new-contributor
|
66/7 |
Mathlib/Data/Nat/Bits.lean,Mathlib/Data/Nat/Bitwise.lean,Mathlib/Data/Nat/Multiplicity.lean,Mathlib/Data/Nat/Size.lean |
4 |
26 |
['Command-Master', 'Rida-Hamadani', 'Ruben-VandeVelde', 'YaelDillies', 'github-actions', 'jcommelin'] |
nobody |
702-975 1 year ago |
737-7197 737 days ago |
56-40668 56 days |
| 15121 |
Eloitor author:Eloitor |
feat: iff theorems for IsSplitEpi and IsSplitMono in opposite category |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-category-theory
new-contributor
|
40/0 |
Mathlib/CategoryTheory/EpiMono.lean |
1 |
3 |
['github-actions', 'joelriou', 'mattrobball'] |
nobody |
688-62210 1 year ago |
720-21469 720 days ago |
7-3203 7 days |
| 14242 |
js2357 author:js2357 |
feat: Prove equivalence of `isDedekindDomain` and `isDedekindDomainDvr` |
Prove that `isDedekindDomainDvr` is equivalent to both `isDedekindDomain` and `isDedekindDomainInv`.
Specifically, prove `isDedekindDomainDvr A → isDedekindDomainInv A`, because `isDedekindDomain A → isDedekindDomainDvr A` and `IsDedekindDomain A ↔ IsDedekindDomainInv A` are already in Mathlib.
- [x] depends on: #14099
- [x] depends on: #14216
- [ ] depends on: #14237
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
blocked-by-other-PR
new-contributor
label:t-algebra$ |
269/1 |
Mathlib.lean,Mathlib/RingTheory/DedekindDomain/Dvr.lean,Mathlib/RingTheory/FractionalIdeal/LocalizedAtPrime.lean,Mathlib/RingTheory/Localization/Basic.lean |
4 |
2 |
['github-actions'] |
nobody |
665-73269 1 year ago |
753-62216 753 days ago |
0-273 4 minutes |
| 16887 |
metinersin author:metinersin |
feat(ModelTheory/Complexity): define conjunctive and disjunctive formulas |
Defines `FirstOrder.Language.BoundedFormula.IsConjunctive` and `FirstOrder.Language.BoundedFormula.IsDisjunctive`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #16885
[](https://gitpod.io/from-referrer/)
|
merge-conflict
blocked-by-other-PR
new-contributor
t-logic
|
300/7 |
Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/Equivalence.lean,Mathlib/ModelTheory/Syntax.lean |
3 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
657-69247 1 year ago |
673-10921 673 days ago |
0-1299 21 minutes |
| 16888 |
metinersin author:metinersin |
feat(ModelTheory/Complexity): Define conjunctive and disjunctive normal forms |
Define `FirstOrder.Language.BoundedFormula.IsDNF` and `FirstOrder.Language.BoundedFormula.IsCNF`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #16887
[](https://gitpod.io/from-referrer/)
|
merge-conflict
blocked-by-other-PR
new-contributor
t-logic
|
415/7 |
Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/Equivalence.lean,Mathlib/ModelTheory/Syntax.lean |
3 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
657-69247 1 year ago |
673-10922 673 days ago |
0-1045 17 minutes |
| 16889 |
metinersin author:metinersin |
feat(ModelTheory/Complexity): Normal forms |
Defines `FirstOrder.Language.BoundedFormula.toDNF` and `FirstOrder.Language.BoundedFormula.toCNF` - given a quantifier-free formula, these construct a semantically equivalent formula in disjunctive normal form and conjunctive normal form, respectively.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #16888
[](https://gitpod.io/from-referrer/)
|
merge-conflict
blocked-by-other-PR
new-contributor
t-logic
|
525/7 |
Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/Equivalence.lean,Mathlib/ModelTheory/Syntax.lean |
3 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
657-69246 1 year ago |
673-6672 673 days ago |
0-613 10 minutes |
| 12750 |
Command-Master author:Command-Master |
feat: define Gray code |
---
Define binary reflected gray code, both as a permutation of `Nat` and as a permutation of `BitVec n`, and prove some theorems about them. Additionally, remove `@[simp]` from `Nat.bit_false` and `Nat.bit_true`, as `bit0` and `bit1` are deprecated, and add some lemmas to `Bits`, `Bitwise` and `Size`.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #12751
[](https://gitpod.io/from-referrer/)
|
blocked-by-other-PR
t-data
new-contributor
merge-conflict
awaiting-author
|
226/0 |
Mathlib.lean,Mathlib/Data/Nat/Bits.lean,Mathlib/Data/Nat/Bitwise.lean,Mathlib/Data/Nat/GrayCode.lean,Mathlib/Data/Nat/Size.lean |
5 |
5 |
['Rida-Hamadani', 'alreadydone', 'github-actions', 'grunweg'] |
nobody |
640-5504 1 year ago |
788-74002 788 days ago |
16-49744 16 days |
| 14598 |
Command-Master author:Command-Master |
chore: add typeclasses to unify various `add_top`, `add_eq_top`, etc. |
Add the four typeclasses `IsTopAbsorbing`, `IsBotAbsorbing`, `NoTopSum`, `NoBotSum`, as additive equivalents for `MulZeroClass` and `NoZeroDivisors`. Add instances of these for `ENNReal`, `WithTop α`, `WithBot α`, `PUnit`, `EReal`, `PartENat`, `Measure`, `Interval` and `Filter`.
Also split `Algebra/Order/AddGroupWithTop` to `Algebra/Order/Group/WithTop` and `Algebra/Order/Monoid/WithTop`
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks, and is labeled with `awaiting-review`.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Previous usages of lemmas with quantified names like `WithTop.add_top` have to be changed to just `add_top`.
`add_lt_top` is `@[simp]`, in accordance with `ENNReal.add_lt_top` being `@[simp]`. This affects `WithTop.add_lt_top` which previously hadn't been `@[simp]`.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
t-order
new-contributor
label:t-algebra$ |
264/195 |
Archive/Wiedijk100Theorems/BallotProblem.lean,Mathlib.lean,Mathlib/Algebra/Order/Group/WithTop.lean,Mathlib/Algebra/Order/GroupWithZero/Canonical.lean,Mathlib/Algebra/Order/Interval/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Defs.lean,Mathlib/Algebra/Order/Monoid/Unbundled/WithTop.lean,Mathlib/Algebra/Order/Monoid/WithTop.lean,Mathlib/Algebra/PUnitInstances/Order.lean,Mathlib/Algebra/Polynomial/Degree/Definitions.lean,Mathlib/Algebra/Polynomial/Monic.lean,Mathlib/Algebra/Tropical/Basic.lean,Mathlib/Analysis/Analytic/Meromorphic.lean,Mathlib/Analysis/Normed/Lp/ProdLp.lean,Mathlib/Analysis/NormedSpace/ENorm.lean,Mathlib/Analysis/SpecialFunctions/JapaneseBracket.lean,Mathlib/Analysis/SpecialFunctions/Log/ENNRealLog.lean,Mathlib/Data/ENNReal/Operations.lean,Mathlib/Data/ENat/Basic.lean,Mathlib/Data/Nat/PartENat.lean,Mathlib/Data/Nat/WithBot.lean,Mathlib/Data/Real/EReal.lean,Mathlib/LinearAlgebra/Lagrange.lean,Mathlib/MeasureTheory/Covering/Differentiation.lean,Mathlib/MeasureTheory/Decomposition/Lebesgue.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/CondexpL1.lean,Mathlib/MeasureTheory/Function/Jacobian.lean,Mathlib/MeasureTheory/Function/L1Space.lean,Mathlib/MeasureTheory/Function/L2Space.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Function/LpSeminorm/TriangleInequality.lean,Mathlib/MeasureTheory/Function/LpSpace.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/Basic.lean,Mathlib/MeasureTheory/Function/UniformIntegrable.lean,Mathlib/MeasureTheory/Integral/Bochner.lean,Mathlib/MeasureTheory/Integral/MeanInequalities.lean,Mathlib/MeasureTheory/Integral/SetIntegral.lean,Mathlib/MeasureTheory/Integral/VitaliCaratheodory.lean,Mathlib/MeasureTheory/Measure/Hausdorff.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Measure/LevyProkhorovMetric.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/MeasureSpaceDef.lean,Mathlib/MeasureTheory/Measure/Regular.lean,Mathlib/MeasureTheory/Measure/Typeclasses.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/Order/Filter/Pointwise.lean,Mathlib/Probability/Kernel/Defs.lean,Mathlib/Probability/Martingale/Convergence.lean,Mathlib/RingTheory/Multiplicity.lean,Mathlib/RingTheory/MvPowerSeries/NoZeroDivisors.lean,Mathlib/RingTheory/UniqueFactorizationDomain.lean,Mathlib/Topology/EMetricSpace/Defs.lean,Mathlib/Topology/MetricSpace/Bounded.lean,Mathlib/Topology/MetricSpace/HausdorffDistance.lean,Mathlib/Topology/MetricSpace/Lipschitz.lean |
57 |
30 |
['Command-Master', 'YaelDillies', 'github-actions'] |
nobody |
623-33780 1 year ago |
623-33780 623 days ago |
7-45599 7 days |
| 16885 |
metinersin author:metinersin |
feat(ModelTheory/Complexity): define literals |
Defines `FirstOrder.Language.BoundedFormula.IsLiteral` and `FirstOrder.Language.BoundedFormula.simpleNot` - an auxiliary operation that takes the negation of a formula and does some simplification.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #16800
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
new-contributor
t-logic
|
148/5 |
Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/Equivalence.lean,Mathlib/ModelTheory/Semantics.lean,Mathlib/ModelTheory/Syntax.lean |
4 |
20 |
['YaelDillies', 'awainverse', 'github-actions', 'mathlib4-dependent-issues-bot', 'metinersin'] |
nobody |
620-76301 1 year ago |
656-65613 656 days ago |
0-19926 5 hours |
| 13248 |
hcWang942 author:hcWang942 |
feat: basic concepts of auction theory |
## Description
Formalise some core concepts and results in auction theory: this includes definitions for first-price and second-price auctions, as well as several fundamental results and helping lemmas.
This is the very first PR of the project formalizing core concepts and results in auction theory.
Our group is working on more contributions on the formalization of game theory prefix.
Co-authored-by: Ma Jiajun <hoxide@gmail.com>
## Reference
Roughgarden, Tim. ***Twenty Lectures on Algorithmic Game Theory***. Cambridge University Press, 2020. [Link](https://www.cambridge.org/core/books/twenty-lectures-on-algorithmic-game-theory/A9D9427C8F43E7DAEF8C702755B6D72B)
---
- [x] Will depend on #14163 once that PR is merged. The Fintype lemmas introduced by this PR have been added in that PR and will be removed from here once that PR gets merged
## Current plan for formalization of Game Theory
The current plan for the formalizing of Game Theory include:
#### 1. Auction Theory. 🎉 _(200+ lines, this PR)_
- Essential definitions of Sealed-bid auction, First-price auction and Second-price auction.
- First-price auction has no dominant strategy.
- Second-price auction has dominant strategy. (Second-price auction is DSIC)
#### 2. Mechanism design & Myerson's Lemma. 🎉 (400+ lines, pending for modification to Mathlib Standard)
- Mechanism design
An allocation rule is implementable if there exists
- Dominant Strategy Incentive Compatible (DSIC) payment rule
- An allocation rule is monotone if for every bidder’s gain is nondecreasing w.r.t. her/his bid
- Myerson's Lemma
Implementable ⇔ Monotone
In the above case, the DSIC payment rule is unique.
#### 3. von Neumann‘s Minimax Theorem. 🎉 (800+ lines, pending for modification to Mathlib Standard)
- Equilibrium in zero sum game
- Formalization strategy: via Loomis’s theorem.
#### 4. Nash Equilibrium. 🎉 (pending for modification to Mathlib Standard)
#### 5. Brouwer fixed-point theorem. (Work in Progress)
#### 6. More Mechanism design. (Planning)
|
merge-conflict
awaiting-author
new-contributor
t-logic
|
204/0 |
Mathlib.lean,Mathlib/GameTheory/Auction/Basic.lean,docs/references.bib |
3 |
148 |
['Shreyas4991', 'YaelDillies', 'eric-wieser', 'faenuccio', 'github-actions', 'grunweg', 'hcWang942', 'tb65536', 'urkud', 'vihdzp'] |
hcWang942 assignee:hcWang942 |
616-28733 1 year ago |
630-14921 630 days ago |
109-82807 109 days |
| 19125 |
yhtq author:yhtq |
feat: add theorems to transfer `IsGalois` between pairs of fraction rings |
feat: add theorems to transfer `IsGalois` between pairs of fraction rings.
- [x] depends on: #18404
- [x] depends on: #19124
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
new-contributor
label:t-algebra$ |
121/0 |
Mathlib.lean,Mathlib/FieldTheory/Galois/IsFractionRing.lean,Mathlib/RingTheory/Localization/FractionRing.lean |
3 |
3 |
['github-actions', 'mathlib4-dependent-issues-bot', 'tb65536'] |
nobody |
586-51150 1 year ago |
613-12532 613 days ago |
0-1980 33 minutes |
| 17739 |
Aaron1011 author:Aaron1011 |
feat(Topology/Order/DenselyOrdered): prove Not (IsOpen) for intervals |
Prove that Iic/Ici/Ioc/Ico/Icc intervals are not open in densely ordered topologies with no min/max element
---
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-topology
new-contributor
|
27/0 |
Mathlib/Topology/Order/DenselyOrdered.lean |
1 |
8 |
['github-actions', 'vihdzp'] |
nobody |
552-73162 1 year ago |
645-64732 645 days ago |
0-4704 1 hour |
| 15711 |
znssong author:znssong |
feat(Combinatorics/SimpleGraph): Some lemmas about walk, cycle and Hamiltonian cycle |
---
These lemmas are separated from the `meow-sister/BondyChvatal` branch and will be needed for the proof of the Bondy-Chvátal theorem.
- [x] depends on: #15536
- [x] depends on: #16294 |
merge-conflict
awaiting-author
t-combinatorics
new-contributor
|
407/3 |
Mathlib/Combinatorics/SimpleGraph/Finite.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Path.lean,Mathlib/Combinatorics/SimpleGraph/Walk.lean |
4 |
22 |
['Rida-Hamadani', 'YaelDillies', 'github-actions', 'mathlib4-dependent-issues-bot', 'znssong'] |
nobody |
552-5848 1 year ago |
673-17009 673 days ago |
9-13962 9 days |
| 18629 |
tomaz1502 author:tomaz1502 |
feat(Computability.Timed): Formalization of runtime complexity of List.merge |
This PR adds the formalization of the runtime complexity of the merge function, defined in `Data/List/Sort`.
Requires: https://github.com/leanprover-community/mathlib4/pull/15450
References:
- Previous PR on mathlib3: https://github.com/leanprover-community/mathlib3/pull/14494/
- First discussion on Zulip: https://leanprover.zulipchat.com/#narrow/stream/113488-general/topic/BSc.20Final.20Project/near/220647062
- Second disussion on Zulip: https://leanprover.zulipchat.com/#narrow/stream/113488-general/topic/Formalization.20of.20Runtime.20Complexity.20of.20Sorting.20Algorithms/near/284184450
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
awaiting-author
new-contributor
|
186/0 |
Mathlib.lean,Mathlib/Computability/Timed/InsertionSort.lean,Mathlib/Computability/Timed/Merge.lean |
3 |
2 |
['github-actions', 'trivial1711'] |
nobody |
551-58167 1 year ago |
591-57780 591 days ago |
33-11262 33 days |
| 18461 |
hannahfechtner author:hannahfechtner |
feat: left and right common multiples mixins |
add mixins for left and right common multiples. These carry the data of what factors are used to create the common multiples
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
78/0 |
Mathlib/Algebra/Group/Defs.lean |
1 |
13 |
['github-actions', 'hannahfechtner', 'jcommelin', 'kbuzzard', 'kim-em', 'trivial1711'] |
nobody |
548-19347 1 year ago |
548-19347 548 days ago |
69-35596 69 days |
| 19291 |
PieterCuijpers author:PieterCuijpers |
feat(Algebra/Order/Hom): add quantale homomorphism |
Definition of quantale homomorphisms as functions that are both semigroup homomorphisms and complete lattice homomorphisms.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #19810
- [x] depends on: #19811
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
209/0 |
Mathlib.lean,Mathlib/Algebra/Order/Hom/Quantale.lean,scripts/noshake.json |
3 |
29 |
['PieterCuijpers', 'YaelDillies', 'github-actions', 'kim-em', 'mathlib4-dependent-issues-bot'] |
nobody |
546-79826 1 year ago |
552-47227 552 days ago |
29-51480 29 days |
| 20372 |
jvlmdr author:jvlmdr |
feat(MeasureTheory/Function): Add ContinuousLinearMap.bilinearCompLp(L) |
Introduce ContinuousLinearMap.bilinearCompLp and bilinearCompLpL.
Generalize eLpNorm_le_eLpNorm_mul_eLpNorm theorems to include constant C in bound condition.
---
Expect this may be useful for defining tempered distributions from functions in `L^p`.
The definitions more or less follow `ContinuousLinearMap.compLp...`. Names are loosely analogous to `ContinuousLinearMap.bilinearComp` and `SchwartzMap.bilinLeftCLM`.
Note: I preferred the spelling `hpqr : p⁻¹ + q⁻¹ = r⁻¹` with `f` in `L^p` and `g` in `L^q` to `hpqr : 1 / p = 1 / q + 1 / r`. It's easier to obtain from `ENNReal.IsConjExponent` too.
A few questions:
- [ ] I defined `bilinear{Left,Right}LpL` in addition to `bilinearCompLpL` because `LinearMap.mkContinuous₂` is marked as `noncomputable` and `LinearMap.mkContinuous` is not. Is this worth the extra definitions? (Note: This is not visible in the source due to `noncomputable section`.)
- [ ] Should I use `C : ℝ` instead of `C : NNReal` for `eLpNorm_le_eLpNorm_mul_eLpNorm'_of_norm'`?
- [ ] Is it going to be painful to have `[Fact (1 ≤ p)] [Fact (1 ≤ q)] [Fact (1 ≤ r)]`? I don't think there's a way to avoid it though. Maybe providing specialized versions for `p.IsConjExponent q` with `L^1`?
Naming:
- [ ] Is it satisfactory to add a `'` to the `eLpNorm_le_eLpNorm_mul_eLpNorm ` definitions in `CompareExp.lean` where `≤ ‖f x‖ * ‖g x‖` has been replaced with `≤ C * ‖f x‖ * ‖g x‖`? These could replace the existing theorems, although I don't want to break backwards compatibility. There are 5 instances: `eLpNorm_le_eLpNorm_top_mul_eLpNorm'`, `eLpNorm_le_eLpNorm_mul_eLpNorm_top'`, `eLpNorm'_le_eLpNorm'_mul_eLpNorm''`, `eLpNorm_le_eLpNorm_mul_eLpNorm_of_nnnorm'`, `eLpNorm_le_eLpNorm_mul_eLpNorm'_of_norm'` (I'm not sure why the existing theorem `eLpNorm_le_eLpNorm_mul_eLpNorm'_of_norm` has an internal `'`)
- [ ] Is `bilinearLeftLpL` a suitable name? Other options: `bilinearCompLpLeftL`, `bilinearCompLeftLpL`, `bilinLeftLpL` (analogous to `SchwartzMap.bilinLeftCLM`)
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-measure-probability
new-contributor
|
203/40 |
Mathlib/MeasureTheory/Function/LpSeminorm/CompareExp.lean,Mathlib/MeasureTheory/Function/LpSpace.lean |
2 |
1 |
['github-actions'] |
nobody |
540-10774 1 year ago |
540-10774 540 days ago |
27-43617 27 days |
| 20248 |
peabrainiac author:peabrainiac |
feat(Topology/Compactness): first-countable locally path-connected spaces are delta-generated |
Shows that all first-countable locally path-connected spaces are delta-generated (so in particular all normed spaces and convex subsets thereof are), and that delta-generated spaces are equivalently generated by the unit interval or standard simplices.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #21616
In principle, this should be close to all that's required to show that all simplicial complexes and CW-complexes are delta-generated; I just haven't done it yet because I'm not sure which file to best do it in.
[](https://gitpod.io/from-referrer/)
|
blocked-by-other-PR
large-import
new-contributor
merge-conflict
awaiting-author
t-topology
|
1189/813 |
Mathlib.lean,Mathlib/Geometry/Manifold/ChartedSpace.lean,Mathlib/Topology/Algebra/Module/LocallyConvex.lean,Mathlib/Topology/Compactness/DeltaGeneratedSpace.lean,Mathlib/Topology/Connected/LocPathConnected.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/ContinuousOn.lean,Mathlib/Topology/Homotopy/HSpaces.lean,Mathlib/Topology/Path.lean |
9 |
22 |
['YaelDillies', 'github-actions', 'kbuzzard', 'mathlib4-dependent-issues-bot', 'peabrainiac'] |
nobody |
527-54484 1 year ago |
534-19001 534 days ago |
39-21495 39 days |
| 19943 |
AlexLoitzl author:AlexLoitzl |
feat(Computability): Add Chomsky Normal Form Grammar and translation |
- Define Chomsky normal form grammars
- Add language-preserving translation between context-free grammars and Chomsky normal form grammars
Co-authored-by: Martin Dvorak martin.dvorak@matfyz.cz
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
awaiting-author
new-contributor
|
3151/0 |
Mathlib.lean,Mathlib/Computability/ChomskyNormalForm/Basic.lean,Mathlib/Computability/ChomskyNormalForm/EmptyElimination.lean,Mathlib/Computability/ChomskyNormalForm/LengthRestriction.lean,Mathlib/Computability/ChomskyNormalForm/TerminalRestriction.lean,Mathlib/Computability/ChomskyNormalForm/Translation.lean,Mathlib/Computability/ChomskyNormalForm/UnitElimination.lean,Mathlib/Computability/ContextFreeGrammar.lean |
8 |
59 |
['AlexLoitzl', 'YaelDillies', 'github-actions', 'kim-em', 'madvorak'] |
nobody |
523-2183 1 year ago |
530-13805 530 days ago |
37-29014 37 days |
| 21501 |
sksgurdldi author:sksgurdldi |
feat(List): add sum_zipWith_eq_finset_sum |
### **Description:**
This PR adds the lemma `List.sum_zipWith_eq_finset_sum` to `Mathlib.Algebra.BigOperators.Group.Finset.Basic`.
#### **Statement:**
The sum of the `zipWith` operation on two lists equals the sum of applying the operation to corresponding elements of the two lists, indexed over the minimum of their lengths.
#### **Formal Statement:**
```lean
lemma sum_zipWith_eq_finset_sum [Inhabited α] [Inhabited β] [AddCommMonoid γ]
{op : α → β → γ}
(l : List α) (m : List β) :
(List.zipWith op l m).sum =
∑ x ∈ (Finset.range (Nat.min l.length m.length)), op (l[x]!) (m[x]!)
```
#### **Remarks:**
- This lemma provides a useful equivalence between `List.zipWith` and summation over a `Finset.range` indexed by `Nat.min l.length m.length`.
- It can be helpful in algebraic manipulations involving list-based summations.
#### **Dependencies:**
No additional dependencies.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
43/0 |
Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean |
1 |
1 |
['github-actions', 'j-loreaux'] |
nobody |
517-57354 1 year ago |
517-57354 517 days ago |
13-33168 13 days |
| 21959 |
BGuillemet author:BGuillemet |
feat(Topology/ContinuousMap): Stone-Weierstrass theorem for MvPolynomial |
Add the subalgebra of multivariate polynomials and prove it separates points, on the same model as `ContinuousMap/Polynomial.lean`.
Prove the Stone-Weierstrass theorem and some variations for multivariate polynomials.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
new-contributor
|
285/1 |
Mathlib.lean,Mathlib/Topology/ContinuousMap/MvPolynomial.lean,Mathlib/Topology/ContinuousMap/StoneWeierstrass.lean |
3 |
1 |
['github-actions'] |
nobody |
503-83195 1 year ago |
503-83195 503 days ago |
16-76141 16 days |
| 15578 |
znssong author:znssong |
feat(Function): Fixed points of function `f` with `f(x) >= x` |
We added some lemmas of fixed points of function `f` with `f(x) >= x`, where `f : α → α` is a function on a finite type `α`. This will be needed in proof of Bondy-Chvátal theorem.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
See also branch `meow-sister/BondyChvatal`.
[](https://gitpod.io/from-referrer/) |
merge-conflict
awaiting-author
t-analysis
new-contributor
|
82/0 |
Mathlib.lean,Mathlib/Dynamics/FixedPoints/Basic.lean,Mathlib/Dynamics/FixedPoints/Increasing.lean |
3 |
32 |
['Ruben-VandeVelde', 'YaelDillies', 'github-actions', 'urkud', 'vihdzp', 'znssong'] |
nobody |
495-79021 1 year ago |
678-82250 678 days ago |
29-48368 29 days |
| 21018 |
markimunro author:markimunro |
feat(Data/Matrix): add file with key definitions and theorems about elementary row operations |
Prove that each elementary row operation is equivalent to a multiplication by an elementary matrix, has another row operation which inverts it, and that each elementary matrix has a left inverse.
This is a very large PR and I understand it will take time. This is my first one and will likely have issues but I will be ready to answer questions/fix them as soon as possible.
Co-authored-by: Christopher Lynch <clynch@clarkson.edu>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
enhancement
new-contributor
merge-conflict
awaiting-author
|
1230/0 |
Mathlib.lean,Mathlib/Data/Matrix/ElementaryRowOperations.lean,Mathlib/Data/Matrix/GaussianElimination.lean,Mathlib/Data/Matrix/GaussianEliminationOld,Mathlib/Data/Matrix/oldnames,et --hard 18533caba32,lean-toolchain |
7 |
17 |
['chrisflav', 'eric-wieser', 'github-actions', 'j-loreaux', 'markimunro'] |
nobody |
477-28020 1 year ago |
502-56976 502 days ago |
23-22681 23 days |
| 15212 |
victorliu5296 author:victorliu5296 |
feat: Add fundamental theorem of calculus-2 for Banach spaces |
add the Mean Value Theorem for Banach spaces to the library and include reference for the theorem statement
This theorem states that if `f : X → Y` is differentiable along the line segment from `a` to `b`, then the change in `f` equals the integral of its derivative along this path. This extends the mean value theorem to Banach spaces. This can be used for the eventual proof of the Newton-Kantorovich theorem with 1 constant contained inside the added reference.
Here is the discussion on Zulipchat: https://leanprover.zulipchat.com/#narrow/stream/287929-mathlib4/topic/Contributing.20FTC-2.20for.20Banach.20spaces |
t-measure-probability
new-contributor
merge-conflict
awaiting-author
t-analysis
|
60/1 |
Mathlib/MeasureTheory/Integral/FundThmCalculus.lean |
1 |
3 |
['github-actions', 'hrmacbeth', 'victorliu5296'] |
nobody |
472-23009 1 year ago |
666-380 665 days ago |
51-85104 51 days |
| 21488 |
imbrem author:imbrem |
feat(CategoryTheory/Monoidal): premonoidal categories |
Add support for premonoidal categories
---
Still want to add support for:
- Premonoidal braided/symmetric categories
- The monoidal coherence theorem, which I've already ported in my `discretion` library
- The `coherence` tactic, which should work fine for premonoidal categories too
but wanted to get this in front of reviewers ASAP to make sure my general approach was alright
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-category-theory
new-contributor
|
900/361 |
Mathlib/Algebra/Category/ModuleCat/Presheaf/Monoidal.lean,Mathlib/CategoryTheory/Bicategory/End.lean,Mathlib/CategoryTheory/GradedObject/Monoidal.lean,Mathlib/CategoryTheory/Localization/Monoidal.lean,Mathlib/CategoryTheory/Monoidal/Braided/Basic.lean,Mathlib/CategoryTheory/Monoidal/Category.lean,Mathlib/CategoryTheory/Monoidal/Center.lean,Mathlib/CategoryTheory/Monoidal/CoherenceLemmas.lean,Mathlib/CategoryTheory/Monoidal/Discrete.lean,Mathlib/CategoryTheory/Monoidal/End.lean,Mathlib/CategoryTheory/Monoidal/Free/Basic.lean,Mathlib/CategoryTheory/Monoidal/Functor.lean,Mathlib/CategoryTheory/Monoidal/FunctorCategory.lean,Mathlib/CategoryTheory/Monoidal/Mon_.lean,Mathlib/CategoryTheory/Monoidal/Opposite.lean,Mathlib/CategoryTheory/Monoidal/Transport.lean,Mathlib/Tactic/CategoryTheory/Monoidal/Datatypes.lean,Mathlib/Tactic/CategoryTheory/Monoidal/Normalize.lean,Mathlib/Tactic/CategoryTheory/Monoidal/PureCoherence.lean,Mathlib/Tactic/CategoryTheory/MonoidalComp.lean,MathlibTest/StringDiagram.lean |
21 |
9 |
['YaelDillies', 'github-actions', 'grunweg', 'imbrem', 'kim-em', 'leanprover-community-bot-assistant'] |
nobody |
469-5197 1 year ago |
469-5198 469 days ago |
58-6028 58 days |
| 20873 |
vbeffara author:vbeffara |
feat(Topology/Covering): path lifting and homotopy lifting |
This proves the existence and uniqueness of path and homotopy lifts through covering maps.
---
I tried to separate as much of the proof as possible into separate PRs (which are already in Mathlib now), but the proof here relies on a monolithic construction of an explicit lift along a well-chosen subdivision, in `partial_lift`, with associated definitions. Only one standalone lean file added.
An older WIP PR #10084 by Junyan Xu @alreadydone proves similar results using a very similar construction for path lifting, with a different argument to obtain continuity for homotopy lifting.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-topology
new-contributor
|
281/1 |
Mathlib.lean,Mathlib/Topology/Covering/Basic.lean,Mathlib/Topology/Covering/Lift.lean |
3 |
9 |
['alreadydone', 'github-actions', 'grunweg', 'vbeffara'] |
nobody |
468-7925 1 year ago |
543-720 543 days ago |
5-5613 5 days |
| 20313 |
thefundamentaltheor3m author:thefundamentaltheor3m |
feat(Data/Complex/Exponential): prove some useful results about the complex exponential. |
This PR proves two basic results about the complex exponential:
* `abs_exp_mul_I (x : ℂ) : abs (Complex.exp (I * x)) = Real.exp (-x.im)`
* `one_sub_rexp_re_le_abs_one_sub_cexp (x : ℂ) : 1 - Real.exp x.re ≤ Complex.abs (1 - Complex.exp x)`
Both results were proved as part of the sphere packing project. There's a chance they're too specific for mathlib, but I thought they were worth PRing anyway. Would it also be a good idea to tag `abs_exp_mul_I` with `simp`? Feedback/suggestions welcome.
Note: `one_sub_rexp_re_le_abs_one_sub_cexp` was proved by Bhavik Mehta @b-mehta
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-analysis
new-contributor
|
167/141 |
Mathlib.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/SpecialFunctions/Log/ERealExp.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev.lean,Mathlib/Data/Complex/Exponential/Defs.lean,Mathlib/Data/Complex/Exponential/Lemmas.lean,Mathlib/Data/Complex/ExponentialBounds.lean,Mathlib/Tactic/FunProp.lean,MathlibTest/Recall.lean,MathlibTest/positivity.lean |
10 |
12 |
['b-mehta', 'github-actions', 'kim-em', 'thefundamentaltheor3m', 'trivial1711'] |
nobody |
460-65523 1 year ago |
543-76781 543 days ago |
8-42240 8 days |
| 20730 |
kuotsanhsu author:kuotsanhsu |
feat(LinearAlgebra/Matrix/SchurTriangulation): prove Schur decomposition/triangulation |
`Matrix.schur_triangulation` shows that a matrix over an algebraically closed field is unitarily similar to an upper triangular matrix
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
317/2 |
Mathlib.lean,Mathlib/LinearAlgebra/Matrix/Block.lean,Mathlib/LinearAlgebra/Matrix/SchurTriangulation.lean,Mathlib/Logic/Equiv/Basic.lean |
4 |
14 |
['eric-wieser', 'github-actions', 'kim-em', 'kuotsanhsu'] |
nobody |
460-61655 1 year ago |
540-52628 540 days ago |
13-56244 13 days |
| 22809 |
b-reinke author:b-reinke |
feat: Category algebras and path algebras |
This PR defines the category algebra of a linear category and path algebras of quivers.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
t-category-theory
new-contributor
label:t-algebra$ |
218/0 |
Mathlib/Algebra/Ring/Assoc.lean,Mathlib/CategoryTheory/Linear/CategoryAlgebra.lean,Mathlib/Combinatorics/Quiver/PathAlgebra.lean,Mathlib/Data/DFinsupp/BigOperators.lean |
4 |
2 |
['b-reinke', 'github-actions'] |
nobody |
445-26094 1 year ago |
unknown |
0-0 0 seconds |
| 15654 |
TpmKranz author:TpmKranz |
feat(Computability): language-preserving maps between NFA and RE |
Map REs to NFAs via Thompson's construction and NFAs to REs using GNFAs
Last chunk of #12648
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #15651
- [ ] depends on: #15649
[](https://gitpod.io/from-referrer/)
|
blocked-by-other-PR
new-contributor
t-computability
merge-conflict
awaiting-zulip
|
985/2 |
Mathlib.lean,Mathlib/Computability/GNFA.lean,Mathlib/Computability/Language.lean,Mathlib/Computability/NFA.lean,Mathlib/Computability/RegularExpressions.lean,Mathlib/Data/FinEnum/Option.lean,docs/references.bib |
7 |
3 |
['github-actions', 'meithecatte'] |
nobody |
442-58773 1 year ago |
711-81958 711 days ago |
0-179 2 minutes |
| 24008 |
meithecatte author:meithecatte |
chore(EpsilonNFA): replace manual lemmas with @[simps] |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-computability
awaiting-author
new-contributor
|
2/24 |
Mathlib/Computability/EpsilonNFA.lean |
1 |
2 |
['YaelDillies', 'github-actions', 'urkud'] |
nobody |
437-17952 1 year ago |
437-17952 437 days ago |
27-52316 27 days |
| 23349 |
BGuillemet author:BGuillemet |
feat: add LocallyLipschitzOn.lipschitzOnWith_of_isCompact and two small lemmas about Lipschitz functions |
Main feat (in Mathlib/Topology/EMetricSpace/Basic.lean): if a function `f` from an extended pseudometric space to a pseudometric space is locally Lipschitz on a compact subset `s`, then `f` is Lipschitz on `s`. The theorem is true only when the codomain of `f` is a pseudometric space, so it needs imports from Mathlib/Topology/MetricSpace.
Other small feat (in Mathlib/Analysis/Calculus/ContDiff/RCLike.lean): a function that is continuously differentiable on an open subset is locally Lipschitz on this subset.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #22890
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
large-import
new-contributor
|
59/4 |
Mathlib/Analysis/Calculus/ContDiff/RCLike.lean,Mathlib/Topology/EMetricSpace/Lipschitz.lean |
2 |
4 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot'] |
PatrickMassot assignee:PatrickMassot |
420-76693 1 year ago |
420-76695 420 days ago |
35-30364 35 days |
| 12799 |
jstoobysmith author:jstoobysmith |
feat(LinearAlgebra/UnitaryGroup): Add properties of Special Unitary Group |
Add properties of the special unitary group, mirroring the properties of found in Algebra/Star/Unitary.lean. In particular, I add an instance of `specialUnitaryGroup` as a `Group`, `Star`, `InvolutiveStar`, and `StarMul`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
please-adopt
t-algebra
new-contributor
merge-conflict
awaiting-author
label:t-algebra$ |
78/0 |
Mathlib/LinearAlgebra/UnitaryGroup.lean |
1 |
8 |
['chrisflav', 'jcommelin', 'leanprover-community-bot-assistant'] |
nobody |
410-48646 1 year ago |
793-76299 793 days ago |
9-22045 9 days |
| 20334 |
miguelmarco author:miguelmarco |
feat: allow polyrith to use a local Singular/Sage install |
Try to call a local install of Singular (either standalone or inside Sage) to find the witness for polyrith before trying to call the online sage cell server.
---
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
new-contributor
t-meta
|
171/48 |
Mathlib/Tactic/Polyrith.lean,scripts/polyrith_sage.py |
2 |
16 |
['eric-wieser', 'github-actions', 'hanwenzhu', 'kim-em', 'miguelmarco', 'mkoeppe'] |
nobody |
403-41199 1 year ago |
541-79180 541 days ago |
27-61515 27 days |
| 25218 |
kckennylau author:kckennylau |
feat(AlgebraicGeometry): Tate normal form of elliptic curves |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebraic-geometry
awaiting-zulip
new-contributor
|
291/26 |
Mathlib.lean,Mathlib/AlgebraicGeometry/EllipticCurve/IsomOfJ.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Modular/TateNormalForm.lean,Mathlib/AlgebraicGeometry/EllipticCurve/NormalForms.lean,Mathlib/AlgebraicGeometry/EllipticCurve/VariableChange.lean |
5 |
31 |
['MichaelStollBayreuth', 'Multramate', 'acmepjz', 'github-actions', 'grunweg', 'kckennylau', 'leanprover-community-bot-assistant'] |
nobody |
382-37960 1 year ago |
415-13077 415 days ago |
6-44783 6 days |
| 10190 |
jstoobysmith author:jstoobysmith |
feat(AlgebraicTopology): add Augmented Simplex Category |
- Added the definition of the category FinLinOrd of finite linear ordered sets.
- Added the definition of the augmented simplex category `AugmentedSimplexCategory`, and showed it is the Skeleton of FinLinOrd.
- Showed that the category of augmented simplicial objects defined as a comma category is equivalent to the category of functors from `AugmentedSimplexCategory^\op`
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
WIP
t-category-theory
new-contributor
merge-conflict
|
720/0 |
Mathlib.lean,Mathlib/AlgebraicTopology/AugmentedSimplexCategory.lean,Mathlib/AlgebraicTopology/SimplicialObject.lean,Mathlib/Order/Category/FinLinOrd.lean |
4 |
5 |
['TwoFX', 'YaelDillies', 'joelriou', 'jstoobysmith'] |
nobody |
356-10100 11 months ago |
893-3026 893 days ago |
7-63253 7 days |
| 25238 |
Hagb author:Hagb |
feat(Tactic/ComputeDegree): add support for scalar multiplication with different types |
It would be able to deal with `a • (X : R[X])` where `a : S` is in a different type `S` with `[SMulZeroClass S R]`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #25237
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
new-contributor
|
17/5 |
Mathlib/Tactic/ComputeDegree.lean,MathlibTest/ComputeDegree.lean |
2 |
3 |
['github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot'] |
nobody |
352-16291 11 months ago |
382-37960 382 days ago |
38-26044 38 days |
| 18646 |
jxjwan author:jxjwan |
feat(RingTheory): isotypic components |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-ring-theory
new-contributor
|
308/0 |
Mathlib/Order/CompactlyGenerated/Basic.lean,Mathlib/RingTheory/Isotypic.lean,Mathlib/RingTheory/SimpleModule.lean |
3 |
1 |
['github-actions'] |
nobody |
351-18312 11 months ago |
604-11905 604 days ago |
20-15640 20 days |
| 28502 |
gilesgshaw author:gilesgshaw |
feat(Logic/Basic): avoid unnecessary uses of choice |
Certain proofs are modified to remove a dependence on the axoim of choice
---
- [ ] depends on: #28623
|
blocked-by-other-PR
new-contributor
merge-conflict
awaiting-author
t-logic
|
83/74 |
Mathlib/Logic/Basic.lean |
1 |
7 |
['Ruben-VandeVelde', 'eric-wieser', 'gilesgshaw', 'github-actions', 'kim-em', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
337-33349 11 months ago |
340-18878 340 days ago |
0-35689 9 hours |
| 19582 |
yu-yama author:yu-yama |
feat(GroupExtension/Abelian): define `OfMulDistribMulAction.equivH2` |
Mainly defines:
- `structure GroupExtension.OfMulDistribMulAction N G [MulDistribMulAction G N]`: group extensions of `G` by `N` where the multiplicative action of `G` on `N` is the conjugation
- `structure GroupExtension.OfMulDistribMulActionWithSection N G [MulDistribMulAction G N]`: group extensions with specific choices of sections
- `def GroupExtension.OfMulDistribMulAction.equivH2`: a bijection between the equivalence classes of group extensions and $H^2 (G, N)$
---
- [x] depends on: #20802 (split PR: contains changes to the `Defs` file)
- [x] depends on: #20998 (split PR: mainly adds the `Basic` file)
- [ ] depends on: #26670 (split PR: adds the first part of the `Abelian` file)
Here is a relevant TODO in Mathlib:
https://github.com/leanprover-community/mathlib4/blob/4e9fa40d7c480937e09cd6e47a591bd6f3b8be42/Mathlib/RepresentationTheory/GroupCohomology/LowDegree.lean#L46-L48
I would appreciate your comments.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
blocked-by-other-PR
new-contributor
label:t-algebra$ |
750/14 |
Mathlib.lean,Mathlib/GroupTheory/GroupExtension/Abelian.lean,Mathlib/GroupTheory/GroupExtension/Defs.lean,docs/references.bib |
4 |
5 |
['YaelDillies', 'erdOne', 'github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
334-69857 11 months ago |
557-40416 557 days ago |
43-22586 43 days |
| 27403 |
MoritzBeroRoos author:MoritzBeroRoos |
fix: replace probably erroneous usage of ⬝ (with old \cdot) by · (with \centerdot) |
Discussion at [zulip](https://leanprover.zulipchat.com/#narrow/channel/270676-lean4/topic/.5Ccdot.20!.3D.20.5Ccenterdot).
Currently the abbreviations \cdot and \centerdot resolve to different, with the naked eye nearly undistinguishable symbols (despite the c in cdot surely standing for center..).
This pr replaces instances of ⬝ where · was probably meant.
All of the replacement is in comments, except for the file bench_summary.lean which is used for priting the github benchmark results. Since this file is about scientific notation of numbers, sure · was meant to be used, not a rectangle.
[Related](https://github.com/leanprover-community/mathlib4/pull/27399)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
new-contributor
|
195/195 |
Mathlib/Algebra/ContinuedFractions/Computation/Approximations.lean,Mathlib/Algebra/DirectSum/Idempotents.lean,Mathlib/Algebra/Lie/Derivation/Basic.lean,Mathlib/Algebra/Module/Equiv/Basic.lean,Mathlib/AlgebraicGeometry/EllipticCurve/DivisionPolynomial/Basic.lean,Mathlib/Analysis/Analytic/Constructions.lean,Mathlib/Analysis/CStarAlgebra/CStarMatrix.lean,Mathlib/Analysis/Calculus/ContDiff/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Analysis/Calculus/FDeriv/Symmetric.lean,Mathlib/Analysis/Fourier/FourierTransformDeriv.lean,Mathlib/Analysis/InnerProductSpace/Dual.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/Normed/Unbundled/InvariantExtension.lean,Mathlib/Analysis/SpecialFunctions/Complex/CircleAddChar.lean,Mathlib/Combinatorics/Configuration.lean,Mathlib/Combinatorics/SimpleGraph/AdjMatrix.lean,Mathlib/Combinatorics/SimpleGraph/LapMatrix.lean,Mathlib/Data/Matrix/Block.lean,Mathlib/Data/Matrix/ConjTranspose.lean,Mathlib/Data/Matrix/Hadamard.lean,Mathlib/Data/Matrix/Mul.lean,Mathlib/Data/Matrix/Notation.lean,Mathlib/Data/Matrix/Reflection.lean,Mathlib/Data/Matrix/RowCol.lean,Mathlib/Data/Matrix/Vec.lean,Mathlib/FieldTheory/PurelyInseparable/PerfectClosure.lean,Mathlib/Geometry/Manifold/GroupLieAlgebra.lean,Mathlib/GroupTheory/Coxeter/Matrix.lean,Mathlib/LinearAlgebra/CrossProduct.lean,Mathlib/LinearAlgebra/Matrix/BilinearForm.lean,Mathlib/LinearAlgebra/Matrix/DotProduct.lean,Mathlib/LinearAlgebra/Matrix/Nondegenerate.lean,Mathlib/LinearAlgebra/Matrix/Orthogonal.lean,Mathlib/LinearAlgebra/Matrix/PosDef.lean,Mathlib/LinearAlgebra/Matrix/SchurComplement.lean,Mathlib/LinearAlgebra/Matrix/SesquilinearForm.lean,Mathlib/LinearAlgebra/Matrix/Trace.lean,Mathlib/LinearAlgebra/Multilinear/Basic.lean,Mathlib/LinearAlgebra/PerfectPairing/Matrix.lean,Mathlib/LinearAlgebra/Projectivization/Constructions.lean,Mathlib/NumberTheory/NumberField/ProductFormula.lean,Mathlib/NumberTheory/SiegelsLemma.lean,Mathlib/RingTheory/DividedPowers/SubDPIdeal.lean,Mathlib/SetTheory/Ordinal/Veblen.lean,Mathlib/Topology/Algebra/Module/Equiv.lean,Mathlib/Topology/Homeomorph/Lemmas.lean,Mathlib/Topology/Instances/Matrix.lean,scripts/bench_summary.lean |
49 |
5 |
['eric-wieser', 'github-actions', 'grunweg', 'leanprover-community-bot-assistant'] |
nobody |
333-34438 10 months ago |
356-10360 356 days ago |
7-54661 7 days |
| 27399 |
MoritzBeroRoos author:MoritzBeroRoos |
chore: replace every usage of ⬝ᵥ (with old \cdot) by ·ᵥ (with \centerdot) |
Discussion at [zulip](https://leanprover.zulipchat.com/#narrow/channel/270676-lean4/topic/.5Ccdot.20!.3D.20.5Ccenterdot).
Currently the abbreviations `\cdot` and `\centerdot` resolve to different, with the naked eye nearly undistinguishable symbols (despite the c in cdot surely standing for `center`..):
- `\cdot` gives ⬝ [U+2B1D](https://www.compart.com/en/unicode/U+2B1D) "Black Very Small Square"
- `\centerdot` gives · [U+00B7](https://www.compart.com/en/unicode/U+00B7) "Middle Dot"
Mathlib mostly uses the `\centerdot` variant, except for the dotProduct notation and some probably unsuspecting people wanting \centerdot but getting \cdot in their comments and 6 uses of a notation using the raw `\cdot` without any subscript at `Mathlib\Topology\Homotopy\Product.lean`.
This PR replaces the dot product `⬝ᵥ` with its `\centerdot` counterpart `·ᵥ`. The related PR [here](https://github.com/leanprover/vscode-lean4/pull/639) can then overwrite the `\cdot` abbreviation, to produce the same symbol as the `centerdot` abbreviation does.
---
[](https://gitpod.io/from-referrer/)
|
merge-conflict
new-contributor
|
133/133 |
Mathlib/Analysis/CStarAlgebra/CStarMatrix.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Combinatorics/Configuration.lean,Mathlib/Combinatorics/SimpleGraph/AdjMatrix.lean,Mathlib/Combinatorics/SimpleGraph/LapMatrix.lean,Mathlib/Data/Matrix/Block.lean,Mathlib/Data/Matrix/ConjTranspose.lean,Mathlib/Data/Matrix/Hadamard.lean,Mathlib/Data/Matrix/Mul.lean,Mathlib/Data/Matrix/Notation.lean,Mathlib/Data/Matrix/Reflection.lean,Mathlib/Data/Matrix/RowCol.lean,Mathlib/Data/Matrix/Vec.lean,Mathlib/LinearAlgebra/CrossProduct.lean,Mathlib/LinearAlgebra/Matrix/BilinearForm.lean,Mathlib/LinearAlgebra/Matrix/DotProduct.lean,Mathlib/LinearAlgebra/Matrix/Nondegenerate.lean,Mathlib/LinearAlgebra/Matrix/Orthogonal.lean,Mathlib/LinearAlgebra/Matrix/PosDef.lean,Mathlib/LinearAlgebra/Matrix/SchurComplement.lean,Mathlib/LinearAlgebra/Matrix/SesquilinearForm.lean,Mathlib/LinearAlgebra/Matrix/Trace.lean,Mathlib/LinearAlgebra/PerfectPairing/Matrix.lean,Mathlib/LinearAlgebra/Projectivization/Constructions.lean,Mathlib/Topology/Instances/Matrix.lean |
25 |
6 |
['MoritzBeroRoos', 'eric-wieser', 'github-actions', 'leanprover-community-bot-assistant'] |
nobody |
332-82670 10 months ago |
356-10361 356 days ago |
7-62439 7 days |
| 27479 |
iu-isgood author:iu-isgood |
feat: Abel's Binomial Theorem |
We have formalized Abel's Binomial Theorem as part of an REU project. There are a few remaining sorrys, but we will finish them soon. I will edit this PR message later according to community rules.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-data
new-contributor
|
326/0 |
Mathlib/Data/Nat/Choose/AbelBinomial.lean |
1 |
28 |
['ElifUskuplu', 'FrankieNC', 'github-actions', 'iu-isgood'] |
nobody |
332-82431 10 months ago |
361-80128 361 days ago |
0-237 3 minutes |
| 26462 |
PSchwahn author:PSchwahn |
feat(LinearAlgebra/Projection): add results about inverse of `Submodule.prodEquivOfIsCompl` |
Add two theorems `Submodule.prodEquivOfIsCompl_symm_apply` and `Submodule.prodEquivOfIsCompl_symm_add`, which are API for `Submodule.prodEquivOfIsCompl`.
We believe these theorems are useful; for example, we have used their statements in a [classification formalization project](https://github.com/LieLean/LowDimSolvClassification).
Co-authored by:
- [Viviana del Barco](https://github.com/vdelbarc)
- [Gustavo Infanti](https://github.com/GuQOliveira)
- [Exequiel Rivas](https://github.com/erivas)
---
I am not sure whether the `prodEquivOfIsCompl_symm_apply` theorem should be tagged with `@[simp]`; this might lead to confluence issues. Opinions are welcome!
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
10/0 |
Mathlib/LinearAlgebra/Projection.lean |
1 |
7 |
['PSchwahn', 'github-actions', 'joelriou', 'kckennylau'] |
joelriou assignee:joelriou |
316-53799 10 months ago |
316-84902 316 days ago |
73-43082 73 days |
| 28623 |
gilesgshaw author:gilesgshaw |
feat(Logic/Basic): minor additions and simplification of proofs |
Add new theorems and simplify proofs.
Specifically, we add the family of related theorems `apply_dite_iff_exists`, `apply_dite_iff_forall`, `apply_ite_iff_and` and `apply_ite_iff_or`.
For each other 'family' of theorems in the file that is analogous to the above, we do the following
- Simplify proofs where possible, e.g. by appealing to the new theorems
- Complete the family, if any of the corresponding four are missing
- Rename to ensure consistency with the above pattern
---
|
merge-conflict
t-logic
new-contributor
|
83/55 |
Archive/Examples/IfNormalization/Result.lean,Archive/Examples/IfNormalization/WithoutAesop.lean,Mathlib/Algebra/ContinuedFractions/Computation/Translations.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Algebra/Notation/Indicator.lean,Mathlib/LinearAlgebra/Matrix/Rank.lean,Mathlib/Logic/Basic.lean,Mathlib/MeasureTheory/Measure/WithDensity.lean,Mathlib/SetTheory/Ordinal/Notation.lean |
9 |
12 |
['eric-wieser', 'gilesgshaw', 'github-actions', 'mathlib4-merge-conflict-bot', 'plp127'] |
awainverse assignee:awainverse |
316-2301 10 months ago |
316-2302 316 days ago |
10-61840 10 days |
| 29588 |
Periecle author:Periecle |
feat(Analysis/Complex/Residue): Implement residue theory for complex functions at isolated singularities |
# Add basic residue theory for complex functions
This PR introduces the residue theory implementation in mathlib.
## Main additions
- **`HasIsolatedSingularityAt f c`**: Predicate for functions with isolated singularities at point `c`
- **`residue f c hf`**: The residue of `f` at isolated singularity `c`, defined via circle integrals
- **Radius independence**: `residue_eq_two_pi_I_inv_smul_circleIntegral` - residue equals normalized circle integral for any valid radius
- **Holomorphic residues**: `residue_of_holomorphic` - functions holomorphic in a neighborhood have zero residue
- **Simple pole formula**: `residue_simple_pole` - for `f(z) = (z-c)⁻¹ * g(z)`, residue equals `g(c)`
## Implementation notes
- Builds on existing circle integral infrastructure in `CauchyIntegral.lean`
- Uses `Classical.choose` to extract witness radius from isolated singularity condition
- Comprehensive documentation with mathematical context and examples
- Establishes foundation for residue theorem, argument principle, and other applications
## Examples included
- `residue(1/z, 0) = 1` (canonical simple pole)
- Radius independence demonstration
- Zero residues for holomorphic functions
This provides the essential building blocks for complex analysis and first step to formalize residue theory. |
awaiting-author
t-analysis
new-contributor
|
383/0 |
Mathlib/Analysis/Complex/Residue/Basic.lean |
1 |
17 |
['Periecle', 'github-actions', 'hrmacbeth', 'llllvvuu', 'loefflerd'] |
nobody |
301-1501 9 months ago |
313-5864 313 days ago |
0-1498 24 minutes |
| 26178 |
ppls-nd-prs author:ppls-nd-prs |
feat(CategoryTheory/Limits): Fubini for products |
We show that the product of products is a product indexed by the sigma type.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-category-theory
new-contributor
|
17/0 |
Mathlib/CategoryTheory/Limits/Shapes/Products.lean |
1 |
6 |
['chrisflav', 'github-actions', 'leanprover-community-bot-assistant', 'ppls-nd-prs', 'robin-carlier'] |
nobody |
296-16545 9 months ago |
397-25945 397 days ago |
0-47289 13 hours |
| 28630 |
Antidite author:Antidite |
feat(Archive/Imo): right isosceles configuration in the complex plane |
feat(Archive/Imo): right isosceles configuration in the complex plane
This adds `Archive/Imo/Imo1975Q3.lean`, formalizing a triangle configuration
with points A=0, B=1, C=z and auxiliary points R, P, Q built via complex
rotations and sine-based scale factors.
Main results:
* `angle_and_distance`: ∠QRP = π/2 and dist Q R = dist R P.
* Key identity `QRP_rot90`: (Q z).z − R.z = e^{iπ/2} · ((P z).z − R.z).
Design/Style:
* Minimal imports; module docstring; semantic lemma names; all definitions and
theorems live under the namespace `IMO.TriangleConfig`.
Moves:
- (none)
Deletions:
- (none)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
IMO
awaiting-author
new-contributor
|
196/0 |
Archive.lean,Archive/Imo/Imo1975Q3.lean |
2 |
36 |
['Antidite', 'LLaurance', 'github-actions', 'jsm28'] |
jsm28 assignee:jsm28 |
290-68691 9 months ago |
290-68691 290 days ago |
46-26438 46 days |
| 16773 |
arulandu author:arulandu |
feat(Probability/Distributions): formalize Beta distribution |
Formalize Beta distribution, using Gamma distribution as a reference. Added real-valued beta wrapper, in the manner of gamma. Thanks to @EtienneC30 for help with casting real <-> complex.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
new-contributor
t-measure-probability
|
286/1 |
Mathlib.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Beta.lean,Mathlib/Probability/Distributions/Beta.lean |
3 |
50 |
['EtienneC30', 'arulandu', 'github-actions', 'mathlib4-merge-conflict-bot', 'vihdzp'] |
arulandu assignee:arulandu |
284-77996 9 months ago |
675-19145 675 days ago |
0-22021 6 hours |
| 30460 |
janithamalith author:janithamalith |
feat(Nat): add lemma nat_card_orbit_mul_card_stabilizer_eq_card_group |
Added a lemma `nat_card_orbit_mul_card_stabilizer_eq_card_group` which is the Nat.card version of MulAction.card_orbit_mul_card_stabilizer_eq_card_group
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-group-theory
new-contributor
|
6/0 |
Mathlib/GroupTheory/GroupAction/CardCommute.lean |
1 |
17 |
['github-actions', 'kckennylau', 'plp127', 'tb65536'] |
tb65536 assignee:tb65536 |
275-1846 9 months ago |
275-1846 275 days ago |
8-8414 8 days |
| 25225 |
xcloudyunx author:xcloudyunx |
feat(Combinatorics/SimpleGraph): Eulerian walk in connected graph contains all vertices |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-combinatorics
new-contributor
|
16/0 |
Mathlib/Combinatorics/SimpleGraph/Trails.lean |
1 |
6 |
['IvanRenison', 'github-actions', 'vlad902'] |
kmill assignee:kmill |
273-51778 9 months ago |
273-51778 273 days ago |
148-3338 148 days |
| 30828 |
DeVilhena-Paulo author:DeVilhena-Paulo |
feat: implementation of `Finmap.merge` |
The main contribution of this pull request is the implementation of a `merge` function for finite maps (`Finmap`). The construction relies on the definition of a `merge` function for association lists (`AList`).
There is also a side (unrelated) contribution on `Mathlib/Data/List/Permutation.lean`: the addition of a theorem about the permutation of a list with a head element (that is, a list of the form `a :: l`).
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
449/3 |
Mathlib/Data/Finmap.lean,Mathlib/Data/List/AList.lean,Mathlib/Data/List/Permutation.lean,Mathlib/Data/List/Sigma.lean |
4 |
1 |
['github-actions'] |
nobody |
271-75210 8 months ago |
271-75278 271 days ago |
0-83 1 minute |
| 28676 |
sun123zxy author:sun123zxy |
feat(NumberTheory/ArithmeticFunction): wrap `Nat.totient` as an `ArithmeticFunction` |
This wraps the Euler's totient function `Nat.totient` into a new `ArithmeticFunction` `ϕ`, with some basic identities such as `ϕ * ζ = id` and `μ * id = ϕ.`
---
We use the notation `ϕ` to distinguish from `Nat.totient`'s notation `φ`, however this might be controversial. Suggestions are welcome!
[](https://gitpod.io/from-referrer/)
|
t-number-theory
new-contributor
large-import
merge-conflict
awaiting-author
|
45/5 |
Mathlib/NumberTheory/ArithmeticFunction.lean |
1 |
19 |
['MichaelStollBayreuth', 'SnirBroshi', 'b-mehta', 'eric-wieser', 'github-actions', 'mathlib4-merge-conflict-bot', 'riccardobrasca', 'sun123zxy'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
267-21249 8 months ago |
282-82325 282 days ago |
47-58551 47 days |
| 30158 |
nicolaviolette author:nicolaviolette |
feat: combinatorics simplegraph basic |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-combinatorics
new-contributor
|
9/4 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean |
1 |
3 |
['b-mehta', 'github-actions'] |
b-mehta assignee:b-mehta |
260-32030 8 months ago |
260-32030 260 days ago |
31-69826 31 days |
| 26901 |
5hv5hvnk author:5hv5hvnk |
feat: a simproc version of `compute_degree` |
Wrap `compute_degree` in a simproc for use by simp.
Closes #22219.
--- |
awaiting-CI
new-contributor
merge-conflict
awaiting-author
t-meta
|
198/0 |
Mathlib.lean,Mathlib/Tactic/Simproc/PolynomialDegree.lean,MathlibTest/polynomial_degree_simproc.lean |
3 |
19 |
['5hv5hvnk', 'YaelDillies', 'adomani', 'github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
257-78698 8 months ago |
378-80068 378 days ago |
0-267 4 minutes |
| 30150 |
imbrem author:imbrem |
feat(CategoryTheory/Monoidal): to_additive for MonoidalCategory |
Add `AddMonoidalCategory`, the additive version of `MonoidalCategory`.
To get this to work, I needed to _remove_ the `to_additive` attributes in `Discrete.lean`, since existing code relies on the `AddMonoid M → MonoidalCategory M` instance. For now, we simply implement the additive variants by hand instead.
---
As discussed in #28718; I added an `AddMonoidalCategory` struct and tagged `MonoidalCategory` with `to_additive`, along with the lemmas in `Category.lean`.
I think this is the right approach, since under this framework the "correct" additive version of `Discrete.lean` would be mapping an `AddMonoid` to an `AddMonoidalCategory`.
Next steps would be to:
- Make `monoidal_coherence` and `coherence` support `AddMonoidalCategory`
- Add `CocartesianMonoidalCategory` extending `AddMonoidalCategory`
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
large-import
new-contributor
merge-conflict
awaiting-zulip
t-meta
|
444/125 |
Mathlib/CategoryTheory/Monoidal/Category.lean,Mathlib/CategoryTheory/Monoidal/Discrete.lean,Mathlib/Tactic/ToAdditive/GuessName.lean |
3 |
22 |
['JovanGerb', 'YaelDillies', 'github-actions', 'imbrem', 'mathlib4-merge-conflict-bot'] |
nobody |
251-41689 8 months ago |
291-20355 291 days ago |
1-160 1 day |
| 15651 |
TpmKranz author:TpmKranz |
feat(Computability/NFA): operations for Thompson's construction |
Lays the groundwork for a proof of equivalence of RE and NFA, w.r.t. described language. Actual connection to REs comes later, after the groundwork for the opposite direction has been laid.
Third chunk of #12648
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-computability
merge-conflict
awaiting-author
awaiting-zulip
|
307/5 |
Mathlib/Computability/NFA.lean |
1 |
27 |
['TpmKranz', 'YaelDillies', 'dupuisf', 'github-actions', 'leanprover-community-bot-assistant', 'meithecatte', 'rudynicolop'] |
nobody |
246-58821 8 months ago |
665-86209 665 days ago |
45-84611 45 days |
| 15649 |
TpmKranz author:TpmKranz |
feat(Computability): introduce Generalised NFA as bridge to Regular Expression |
Lays the groundwork for a proof of equivalence of NFA and RE, w.r.t. described language. Actual connection to NFA comes later, after the groundwork for the opposite direction has been laid.
Second chunk of #12648
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #15647 [Data.FinEnum.Option unchanged since then]
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-computability
merge-conflict
awaiting-author
awaiting-zulip
|
298/0 |
Mathlib.lean,Mathlib/Computability/GNFA.lean,Mathlib/Computability/Language.lean,Mathlib/Computability/RegularExpressions.lean,docs/references.bib |
5 |
7 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'meithecatte', 'trivial1711'] |
nobody |
245-75062 8 months ago |
591-38592 591 days ago |
23-54870 23 days |
| 5919 |
MithicSpirit author:MithicSpirit |
feat: implement orthogonality for AffineSubspace |
Define `AffineSubspace.orthogonal` and `AffineSubspace.IsOrtho`, as well as develop an API emulating that of `Submodule.orthogonal` and `Submodule.IsOrtho`, respectively. Additionally, provide some relevant lemmas exclusive to affine subspaces, which are mostly to do with the relationship between orthogonality and `AffineSubspace.Parallel`.
Closes #5539
---
Still WIP as I need to add more docstrings as well as notations for the new definitions.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
new-contributor
merge-conflict
help-wanted
t-analysis
|
287/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/AffineSubspace.lean |
2 |
7 |
['MithicSpirit', 'eric-wieser', 'github-actions', 'leanprover-community-bot-assistant', 'mathlib4-merge-conflict-bot'] |
MithicSpirit assignee:MithicSpirit |
245-26519 8 months ago |
928-51414 928 days ago |
0-433 7 minutes |
| 13442 |
dignissimus author:dignissimus |
feat: mabel tactic for multiplicative abelian groups |
Mabel tactic for multiplicative abelian groups (#10361)
---
[](https://gitpod.io/from-referrer/)
|
new-contributor
merge-conflict
modifies-tactic-syntax
awaiting-author
help-wanted
t-meta
|
439/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/MAbel.lean,MathlibTest/mabel.lean |
4 |
11 |
['BoltonBailey', 'dignissimus', 'github-actions', 'joneugster', 'kbuzzard', 'mathlib4-merge-conflict-bot'] |
joneugster assignee:joneugster |
245-26255 8 months ago |
695-18341 695 days ago |
0-16 16 seconds |
| 15224 |
AnthonyBordg author:AnthonyBordg |
feat(CategoryTheory/Sites): covering families and their associated Grothendieck topology |
Define covering families on a category and their associated Grothendieck topology by using the API for `Coverage`.
Give an explicit characterization of the covering sieves of the said topology.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-category-theory
new-contributor
|
112/0 |
Mathlib.lean,Mathlib/CategoryTheory/Sites/CoveringFamilies.lean |
2 |
21 |
['AnthonyBordg', 'adamtopaz', 'dagurtomas', 'github-actions', 'joelriou', 'mathlib4-merge-conflict-bot'] |
nobody |
245-26124 8 months ago |
720-78755 720 days ago |
1-48443 1 day |
| 20648 |
anthonyde author:anthonyde |
feat: formalize regular expression -> εNFA |
The file `Computability/RegularExpressionsToEpsilonNFA.lean` contains a formal definition of Thompson's method for constructing an `εNFA` from a `RegularExpression` and a proof of its correctness.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #20644
- [x] depends on: #20645
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
awaiting-zulip
new-contributor
|
490/0 |
Mathlib.lean,Mathlib/Computability/RegularExpressionsToEpsilonNFA.lean,docs/references.bib |
3 |
7 |
['anthonyde', 'github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'meithecatte', 'qawbecrdtey'] |
nobody |
245-25830 8 months ago |
442-58759 442 days ago |
75-77754 75 days |
| 21903 |
yhtq author:yhtq |
feat: add from/toList between `FreeSemigroup` and `List` with relative theorems |
Add from/toList between `FreeSemigroup` and `List` with relative theorems, as well as an incidental definition of lexicographic order on `FreeSemigroup`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
awaiting-CI
large-import
merge-conflict
label:t-algebra$ |
169/0 |
Mathlib/Algebra/Free.lean |
1 |
12 |
['YaelDillies', 'github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
245-25690 8 months ago |
472-9645 472 days ago |
50-9299 50 days |
| 22159 |
shetzl author:shetzl |
feat: add definition of pushdown automata |
Add the definition of pushdown automata and their two acceptance conditions: acceptance based on empty stack and acceptance based on final state.
Co-authored-by: Tobias Leichtfried <tobias.leichtfried@tuwien.ac.at>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
awaiting-author
new-contributor
|
70/0 |
Mathlib.lean,Mathlib/Computability/PDA.lean |
2 |
35 |
['YaelDillies', 'github-actions', 'madvorak', 'mathlib4-merge-conflict-bot', 'shetzl'] |
nobody |
245-25684 8 months ago |
492-19697 492 days ago |
20-81248 20 days |
| 22302 |
658060 author:658060 |
feat: add `CategoryTheory.Topos.Power` |
This is a continuation of #21281 with the end goal of defining topoi in Mathlib. It introduces the notion of a power object in a category with a subobject classifier, which is a special case of an internal hom.
The definition `HasPowerObjects C` contained in this PR is all that remains before `IsTopos C` can be defined.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-category-theory
new-contributor
|
312/0 |
Mathlib.lean,Mathlib/CategoryTheory/Topos/Power.lean |
2 |
3 |
['github-actions', 'joelriou', 'mathlib4-merge-conflict-bot'] |
b-mehta assignee:b-mehta |
245-25675 8 months ago |
511-59677 511 days ago |
0-1528 25 minutes |
| 22790 |
mhk119 author:mhk119 |
feat: Extend `taylor_mean_remainder_lagrange` to `x < x_0` |
The `taylor_mean_remainder_lagrange` theorem has the assumption that $x_0 < x$. In many applications, we need $x < x_0$ and one cannot use the current version to obtain this (see [zulip](https://leanprover.zulipchat.com/#narrow/channel/116395-maths/topic/Taylor's.20theorem)). This PR introduces a set of theorems that push negations through Taylor expansions so that one can extend `taylor_mean_remainder_lagrange` to the case when $x < x_0$. These theorems should also be useful elsewhere since they are quite general. |
merge-conflict
awaiting-author
t-analysis
new-contributor
|
111/1 |
Mathlib/Analysis/Calculus/Deriv/Basic.lean,Mathlib/Analysis/Calculus/IteratedDeriv/Lemmas.lean,Mathlib/Analysis/Calculus/Taylor.lean |
3 |
13 |
['Paul-Lez', 'github-actions', 'grunweg', 'mathlib4-merge-conflict-bot', 'mhk119'] |
nobody |
245-25662 8 months ago |
473-40779 473 days ago |
23-14843 23 days |
| 25739 |
literandltx author:literandltx |
feat(NumberTheory/LegendreSymbol): Add sqrt‐of‐residue theorems for p=4k+3 and p=8k+5 |
Add a new file `QuadraticResidueRoots.lean` under `Mathlib/NumberTheory/LegendreSymbol/` that proves two explicit “square-root of quadratic residue” theorems for primes of the specific form.
- **`exists_sqrt_of_residue_mod4_eq3`** for primes `p = 4*k + 3`
- **`exists_sqrt_of_residue_mod8_eq5`** for primes `p = 8*k + 5`
It also introduces the helper lemmas `euler_criterion_traditional` and `legendreSym.at_two_mod8_eq_5`. Import lines in `Mathlib.lean` and `Mathlib/NumberTheory/LegendreSymbol/Basic.lean` have been updated accordingly.
|
merge-conflict
awaiting-author
t-number-theory
new-contributor
|
217/0 |
Mathlib.lean,Mathlib/NumberTheory/LegendreSymbol/Basic.lean,Mathlib/NumberTheory/LegendreSymbol/QuadraticReciprocity.lean,Mathlib/NumberTheory/LegendreSymbol/QuadraticResidueRoots.lean |
4 |
3 |
['github-actions', 'kckennylau', 'mathlib4-merge-conflict-bot'] |
literandltx assignee:literandltx |
245-25360 8 months ago |
387-48923 387 days ago |
17-63153 17 days |
| 26594 |
metakunt author:metakunt |
feat(Algebra/Polynomial/ZMod): Add Polynomial.equiv_of_nat_of_polynomial_zmod |
This adds an explicit bijection between the naturals and $$\mathbb{Z}/n\mathbb{Z}[X]$$ in a canonical way.
---
I feel that some API is missing to make the theorem shorter, I have no idea what lemmas to extract though.
Also I don't know when to use spaces and when not, so I did it best effort.
|
merge-conflict
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
465/0 |
Mathlib.lean,Mathlib/Algebra/Polynomial/ZMod.lean |
2 |
3 |
['Ruben-VandeVelde', 'github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
245-25000 8 months ago |
360-68758 360 days ago |
25-5689 25 days |
| 26757 |
fweth author:fweth |
feat(CategoryTheory/Topos): define elementary topos |
This commit begins the formalization of the notion of an *elementary topos*, following the definition in \[Mac Lane & Moerdijk, *Sheaves in Geometry and Logic* (1992), Ch. IV, Section 1]. It introduces the file `Mathlib/CategoryTheory/Topos/Basic.lean`, which currently includes:
* The definition of an elementary topos.
* Proof that the power object map is a functor
* Theorem about pullbacks of characterstic maps
Subobject classifiers, which are used in the definition, have already been defined in `CategoryTheory/Topos/Classifier.lean`
Work in progress: further formalization of the section is planned.
Questions:
* Should the definition of power objects be separated into its own file/module, perhaps under `CategoryTheory/Topos/PowerObject.lean`?
* Is the notation `P` / `P_morph` / `P_functor` for the power object functor on objects / morphisms / total acceptable?
* Should the comments and docstrings rather use the notation from the book, where `g ∘ f` denotes arrow composition from righ to left, or the Lean variant `f ≫ g`?
Klaus Gy klausgy@gmail.com
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-category-theory
new-contributor
|
401/66 |
Mathlib.lean,Mathlib/CategoryTheory/Closed/PowerObjects.lean,Mathlib/CategoryTheory/Limits/Shapes/BinaryProducts.lean,Mathlib/CategoryTheory/Limits/Shapes/Equalizers.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/CommSq.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/Equalizer.lean,Mathlib/CategoryTheory/Monoidal/Cartesian/Basic.lean,Mathlib/CategoryTheory/Subobject/Basic.lean,Mathlib/CategoryTheory/Topos/Classifier.lean |
9 |
17 |
['fweth', 'github-actions', 'joelriou', 'leanprover-community-bot-assistant', 'mathlib4-merge-conflict-bot'] |
joelriou assignee:joelriou |
245-24995 8 months ago |
274-13805 274 days ago |
62-9859 62 days |
| 27155 |
Pjotr5 author:Pjotr5 |
feat: Shearer's bound on the independence number of triangle free graphs |
I added the file IndependenceNumber.lean to the Mathlib.Combinatorics.SimpleGraph.Triangle folder. It contains a proof of a theorem by Shearer on the independence number of triangle-free graphs . I was told this might be useful to add to Mathlib a Zullip thread linked [here](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Convexity.20of.20a.20specific.20function/with/510469526).
I tried to comply as much as I could with the Mathlib style guide, but I realise that there is probably still a significant amount of editing to be done. For one thing: there are probably some lemmas and theorems in there that might be better suited in other files, but since this is my first PR I though I would all put it in one file before starting to edit a bunch of files.
I was also advised to split up the file into multiple smaller PRs, but since everything is basically serving this one proof I could not really find a natural way to do that.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-combinatorics
new-contributor
|
1266/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Triangle/IndependenceNumber.lean |
2 |
10 |
['Pjotr5', 'github-actions', 'grunweg', 'mathlib4-merge-conflict-bot'] |
nobody |
245-24958 8 months ago |
372-12567 372 days ago |
0-287 4 minutes |
| 27753 |
YunkaiZhang233 author:YunkaiZhang233 |
feat(CategoryTheory): implemented proofs for factorisation categories being equivalent to iterated comma categories in two ways |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Completed one of the tasks in TODOs, shown and implemented the details for (X/C)/f ≌ Factorisation f ≌ f/(C/Y).
This is migrated from my previous PR #22390
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-category-theory
new-contributor
|
70/1 |
Mathlib/CategoryTheory/Category/Factorisation.lean |
1 |
13 |
['YunkaiZhang233', 'b-mehta', 'github-actions', 'mathlib4-merge-conflict-bot', 'robin-carlier'] |
nobody |
245-24803 8 months ago |
355-82366 355 days ago |
0-3448 57 minutes |
| 27850 |
fyqing author:fyqing |
feat: 0-dimensional manifolds are discrete and countable |
This is the converse direction of the classification of 0-dimensional manifolds. The other direction was shown in #22105.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-differential-geometry
new-contributor
|
80/0 |
Mathlib.lean,Mathlib/Geometry/Manifold/ZeroDim.lean |
2 |
14 |
['fyqing', 'github-actions', 'grunweg', 'mathlib4-merge-conflict-bot', 'tb65536'] |
grunweg assignee:grunweg |
245-24801 8 months ago |
354-57028 354 days ago |
0-5814 1 hour |
| 28125 |
nonisomorphiclinearmap author:nonisomorphiclinearmap |
feat(Combinatorics): basic definition of simplicial complexes |
This PR introduces the basic definition of a finite (abstract) simplicial complex, located in Mathlib/Combinatorics/SimplicialComplex/Basic.lean.
---
This is our first contribution to mathlib. This work was done as part of the Fields Institute Summer Undergraduate Program on formalization in topological combinatorics. Eventually, we aim to formalize Lovasz's proof of the Kneser Conjecture and this is a small stepping stone in that direction. Some other commits will shortly depend on this one.
We would like to acknowledge the Fields Institute for Research in Mathematical Sciences for their sponsorship. We would also like to thank our supervisors, Professor Chris Kapulkin and Mr. Daniel Carranza, for their guidance and support throughout this project. We would also like to thank our group members Tom Lindquist and Quang Minh Nguyen for our fruitful discussions. |
merge-conflict
t-combinatorics
new-contributor
|
374/0 |
Mathlib.lean,Mathlib/Combinatorics/SimplicialComplex/Basic.lean,Mathlib/Combinatorics/SimplicialComplex/Category.lean,Mathlib/Combinatorics/SimplicialComplex/FacePoset.lean,Mathlib/Combinatorics/SimplicialComplex/Hom.lean |
5 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
awainverse assignee:awainverse |
245-24669 8 months ago |
245-24670 245 days ago |
99-62977 99 days |
| 28530 |
nonisomorphiclinearmap author:nonisomorphiclinearmap |
feat(Combinatorics/SimplicialComplex/Topology): add standard simplices and geometric realisation (colimit + functoriality) |
Introduce the standard simplex on a finite vertex set and build the geometric realisation |X| of a simplicial complex. Prove that |X| is the colimit of the face diagram δ_X : X.faces ⥤ TopCat, and define the induced map on realisations |φ| : |X| ⟶ |Y| for a simplicial map φ. Show that the abstract map from colimit functoriality agrees with the concrete push-forward of barycentric coordinates. Package these into a functor SimplicialComplexCat ⥤ TopCat.
---
This is our first contribution to mathlib. This work was done as part of the Fields Institute Summer Undergraduate Program on formalization in topological combinatorics. Eventually, we aim to formalize Lovasz's proof of the Kneser Conjecture and this lays the groundwork to do this.
We would like to acknowledge the Fields Institute for Research in Mathematical Sciences for their sponsorship. We would also like to thank our supervisors, Professor Chris Kapulkin and Mr. Daniel Carranza, for their guidance and support throughout this project. I would also like to thank our group members Sebastian Kumar, Tom Lindquist and Quang Minh Nguyen for our fruitful discussions.
- [ ] depends on: #28125 |
merge-conflict
blocked-by-other-PR
t-combinatorics
new-contributor
|
1826/0 |
Mathlib.lean,Mathlib/Combinatorics/SimplicialComplex/Basic.lean,Mathlib/Combinatorics/SimplicialComplex/Category.lean,Mathlib/Combinatorics/SimplicialComplex/FacePoset.lean,Mathlib/Combinatorics/SimplicialComplex/Hom.lean,Mathlib/Combinatorics/SimplicialComplex/Topology/GeomReal/Basic.lean,Mathlib/Combinatorics/SimplicialComplex/Topology/GeomReal/Colimit.lean,Mathlib/Combinatorics/SimplicialComplex/Topology/GeomReal/Diagram.lean,Mathlib/Combinatorics/SimplicialComplex/Topology/GeomReal/Functor.lean,Mathlib/Combinatorics/SimplicialComplex/Topology/GeomReal/Map.lean,Mathlib/Combinatorics/SimplicialComplex/Topology/Simplex.lean,Mathlib/Combinatorics/SimplicialComplex/Topology/SimplexMap.lean |
12 |
3 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
245-24655 8 months ago |
339-64883 339 days ago |
0-591 9 minutes |
| 28871 |
JaafarTanoukhi author:JaafarTanoukhi |
feat(Combinatorics/Digraph): Tournaments |
Define orientations and tournaments. Related to #26771.
Co-authored-by: Rida Hamadani <mridahamadani@gmail.com>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-combinatorics
new-contributor
|
62/0 |
Mathlib.lean,Mathlib/Combinatorics/Digraph/Orientation.lean,Mathlib/Combinatorics/Digraph/Tournament.lean |
3 |
6 |
['JaafarTanoukhi', 'Rida-Hamadani', 'SnirBroshi', 'github-actions', 'mathlib4-merge-conflict-bot'] |
kmill assignee:kmill |
245-24516 8 months ago |
245-24517 245 days ago |
71-37436 71 days |
| 29947 |
JaafarTanoukhi author:JaafarTanoukhi |
feat(Combinatorics/Digraph): Maps |
Ported `SimpleGraph/Maps.lean` to `Digraph/Maps.lean` for future PRs related to issue #[26771](https://github.com/leanprover-community/mathlib4/issues/26771)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-combinatorics
new-contributor
|
476/0 |
Mathlib.lean,Mathlib/Combinatorics/Digraph/Maps.lean |
2 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
awainverse assignee:awainverse |
245-23882 8 months ago |
245-23883 245 days ago |
54-85998 54 days |
| 11021 |
jstoobysmith author:jstoobysmith |
feat(AlgebraicTopology): add join of augmented SSets |
This pull-request adds the definition of the join of augmented SSets defined as contravariant functors from `WithInitial SimplexCategory` to `Type u`. In addition it shows that the join of two standard augmented SSets is again an augmented SSets.
From this the definition of the join of simplicial sets should follow easily.
To aid the above theory, an api for `WithInitial SimplexCategory` has been created, with the notion of the `join` and `split` (forming a sort of inverse to join) of objects in this category are defined.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-algebraic-topology
new-contributor
|
2137/1 |
.gitignore,Mathlib.lean,Mathlib/AlgebraicTopology/Join.lean,Mathlib/AlgebraicTopology/SimplexCategory.lean,Mathlib/AlgebraicTopology/SimplexCategoryWithInitial.lean,Mathlib/AlgebraicTopology/SimplicialSet.lean |
6 |
47 |
['github-actions', 'jcommelin'] |
nobody |
244-84130 8 months ago |
874-51575 874 days ago |
1-20227 1 day |
| 18626 |
hannahfechtner author:hannahfechtner |
feat: define Artin braid groups |
Define the Artin braid group on infinitely many strands. Includes a toGroup function which defines a function out of the braid group to any other group (given a function which satisfies the braid relations)
(more to come in this file; next up: Artin braid groups on finitely many strands)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
91/0 |
Mathlib.lean,Mathlib/GroupTheory/SpecificGroups/BraidGroup/Basic.lean |
2 |
22 |
['github-actions', 'hannahfechtner', 'jcommelin', 'joelriou'] |
nobody |
244-83977 8 months ago |
608-4456 608 days ago |
15-38343 15 days |
| 20029 |
FrederickPu author:FrederickPu |
feat(Tactic/simps): allow for Config attributes to be set directly |
Allow for Config attributes to be set directly when using initialize_simp_projection as per issue #19895
Basically modified initialize_simp_projection so that the user has the option of specifying a tuple of config option values.
Ex:
```
initialize_simp_projection MulEquiv (toFun → apply, invFun → symm_apply) (fullyApplied := false)
```
These config options are then converted into projections.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
new-contributor
t-meta
|
34/4 |
Mathlib/Tactic/Simps/Basic.lean |
1 |
11 |
['FrederickPu', 'YaelDillies', 'fpvandoorn', 'github-actions', 'leanprover-community-bot-assistant'] |
nobody |
244-83914 8 months ago |
581-14763 581 days ago |
0-34081 9 hours |
| 21269 |
658060 author:658060 |
feat(CategoryTheory/Topos): basic definitions and results in topos theory |
This code contains basic definitions and results in topos theory, including the definition of a subobject classifier, power objects, and topoi. It is proved that every topos has exponential objects, i.e. "internal homs". The mathematical content follows chapter IV sections 1-2 of Mac Lane and Moerdijk's text "Sheaves in Geometry and Logic".
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #21281
[](https://gitpod.io/from-referrer/)
|
WIP
t-category-theory
new-contributor
merge-conflict
awaiting-author
|
1269/0 |
Mathlib.lean,Mathlib/CategoryTheory/Topos/Basic.lean,Mathlib/CategoryTheory/Topos/Classifier.lean,Mathlib/CategoryTheory/Topos/Exponentials.lean,Mathlib/CategoryTheory/Topos/Power.lean |
5 |
10 |
['658060', 'gio256', 'github-actions', 'joelriou', 'mathlib4-dependent-issues-bot'] |
nobody |
244-83887 8 months ago |
537-62701 537 days ago |
0-13879 3 hours |
| 23990 |
robertmaxton42 author:robertmaxton42 |
feat(Types.Colimits): Quot is functorial and colimitEquivQuot is natural |
Add `Functor.quotFunctor` to parallel `Functor.sectionsFunctor`, witnessing that `Quot` is functorial; add `colimNatIsoQuotFunctor` to parallel `limNatIsoSectionsFunctor`, witnessing that `colimitEquivQuot` is natural in the diagram $F$.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-category-theory
new-contributor
|
33/0 |
Mathlib/CategoryTheory/Limits/Types/Colimits.lean |
1 |
5 |
['github-actions', 'joelriou', 'leanprover-community-bot-assistant', 'robertmaxton42'] |
nobody |
244-83770 8 months ago |
456-82705 456 days ago |
8-27116 8 days |
| 27991 |
sinianluoye author:sinianluoye |
feat(Rat): add Rat.den_eq_of_add_den_eq_one and its dependent lemmas |
```lean4
example {q r : ℚ} (h : (q + r).den = 1) : q.den = r.den := by
```
It is so simple, but I couldn't find it in current mathlib repo.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-data
new-contributor
|
22/0 |
Mathlib/Data/Rat/Lemmas.lean |
1 |
33 |
['github-actions', 'kim-em', 'mathlib-bors', 'pechersky', 'sinianluoye', 'themathqueen'] |
pechersky assignee:pechersky |
244-83453 8 months ago |
273-70588 273 days ago |
74-62001 74 days |
| 28215 |
5hv5hvnk author:5hv5hvnk |
feat: strong and Weak connectivity for Digraphs |
strong and weak connectivity in Digraphs
---
Should resolve a part of issue #26771
Main additions in the PR:
1. Walks in Digraphs (Walk.lean)
- Basic walk structure with start and end vertices
- Support for walk operations: append, reverse, length
- Support functions: getVert, copy, support
2. Walk Decompositions (WalkDecomp.lean)
- takeUntil and dropUntil functions to split walks
- rotate operation for loop walks
- Theorems relating to walk decomposition properties
3. Subgraphs (subgraph.lean)
- Subgraph structure for digraphs
- Induced and spanning subgraph predicates
- Lattice structure (sup, inf, top, bot)
- Coercion to standalone digraphs
4. Paths (Paths.lean)
- Trail, Path, Circuit, Cycle definitions
- Path structure with no repeating vertices
- Theorems relating different path types
- Basic connectivity definitions (reachable, weakly/strongly connected)
5. Connectivity (Connected.lean)
- Reachability relations and properties
- Strong and weak connectivity definitions
- Connected component types:
- StronglyConnectedComponent
- WeaklyConnectedComponent
- ConnectedComponent
- Component properties and equivalence relations
-->
[](https://gitpod.io/from-referrer/)
|
WIP
new-contributor
merge-conflict
awaiting-author
t-combinatorics
|
1266/0 |
Mathlib.lean,Mathlib/Combinatorics/Digraph/Connected.lean,Mathlib/Combinatorics/Digraph/Paths.lean,Mathlib/Combinatorics/Digraph/Subgraph.lean,Mathlib/Combinatorics/Digraph/Walk.lean,Mathlib/Combinatorics/Digraph/WalkDecomp.lean |
6 |
4 |
['github-actions', 'grunweg', 'mathlib4-merge-conflict-bot'] |
nobody |
244-83432 8 months ago |
345-36099 345 days ago |
0-454 7 minutes |
| 29574 |
JarodAlper author:JarodAlper |
feat: regular local rings are domains |
We have added three new files in Mathlib/RingTheory/LocalRing
* EmbeddingDimension.lean
* LocalRingDimension.lean
* RegularLocalRings.lean
We have added two lemmas and an instance in Mathlib/RingTheory/LocalRing/RingHom/Basic.lean
This work was done by Jarod Alper and Brian Nugent.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-ring-theory
new-contributor
|
910/3 |
Mathlib.lean,Mathlib/RingTheory/LocalRing/EmbeddingDimension.lean,Mathlib/RingTheory/LocalRing/LocalRingDimension.lean,Mathlib/RingTheory/LocalRing/RegularLocalRings.lean,Mathlib/RingTheory/LocalRing/RingHom/Basic.lean,lake-manifest.json |
6 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
244-83321 8 months ago |
311-84391 311 days ago |
0-1063 17 minutes |
| 28718 |
imbrem author:imbrem |
feat: class for chosen finite coproducts |
Added basic `ChosenFiniteCoproducts` class, and started porting some of the lemmas about `ChosenFiniteProducts` suitably translated
---
This, combined with #20182 modified to use chosen finite coproducts and premonoidal categories (#21488), should be enough for me to formalize strong Elgot categories, and hence a lot of categorical iteration theory for my PhD thesis.
Re-done from #21603 to deal with changes in #24399 and #24390
Eventually, if we really want to harmonize approaches, we could introduce an `AddMonoidalCategory` struct and do the analogous to #24399 and #24390 for additive monoidal structure, but that seems like a massive overcomplication for now. It would allow formalizing fun things like rig categories, though.
- [ ] depends on: #30150 |
blocked-by-other-PR
t-category-theory
new-contributor
merge-conflict
awaiting-author
|
290/0 |
Mathlib.lean,Mathlib/CategoryTheory/ChosenFiniteCoproducts.lean |
2 |
9 |
['YaelDillies', 'github-actions', 'imbrem', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'robin-carlier'] |
nobody |
244-83233 8 months ago |
335-57736 335 days ago |
0-581 9 minutes |
| 26765 |
KiringYJ author:KiringYJ |
feat(MeasureTheory/PiSystem): add π-λ theorem and SetLike instance |
Add two small features to `MeasureTheory/PiSystem`:
1. SetLike instance
`instance : SetLike (DynkinSystem α) (Set α)`
This lets us write `s ⊆ d` and `t ∈ d` for a DynkinSystem `d`, matching usual mathlib style.
2. `DynkinSystem.pi_lambda` lemma
Classical π‑λ theorem: if a π‑system `s` is contained in a Dynkin system `d`, every set measurable for `σ(s)` is also in `d`.
Currently, mathlib exposes this result only indirectly (e.g. via `generateFrom_eq`). Although logically equivalent, it is not obvious at first glance that those lemmas are the π‑λ theorem. The new lemma states the result in its familiar textbook form, so users can recognise and cite it immediately.
Both pieces are under 10 lines, term‑mode only, and do not modify existing APIs.
No breaking changes.
No dependencies.
|
awaiting-author
t-measure-probability
new-contributor
|
13/0 |
Mathlib/MeasureTheory/PiSystem.lean |
1 |
14 |
['EtienneC30', 'KiringYJ', 'dagurtomas', 'github-actions', 'ocfnash'] |
RemyDegenne assignee:RemyDegenne |
244-69629 8 months ago |
244-69629 244 days ago |
138-3922 138 days |
| 32169 |
saodimao20 author:saodimao20 |
feat: add convolution_comp_add_right |
This PR adds a lemma `convolution_comp_translation_right` showing that convolution commutes with translation on the right operand. Specifically, it proves that for an additive commutative group $G$, the convolution of a function $f$ with a translated function $x \mapsto g(a + x)$ is equal to the convolution of $f$ and $g$ evaluated at $x + a$.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
new-contributor
awaiting-author
|
14/0 |
Mathlib/Analysis/Convolution.lean |
1 |
3 |
['github-actions', 'urkud'] |
nobody |
236-25800 7 months ago |
236-25800 236 days ago |
0-82278 22 hours |
| 30525 |
ZihuiBai author:ZihuiBai |
feat(Mathlib/Combinatorics/Enumerative/Polya): Add Polya Counting |
This PR introduces basic definitions and results about colorings under permutation group actions.
A coloring is defined as a function X → Y, and the permutation group Equiv.Perm X acts on colorings by precomposition:
(g • c) x = c (g⁻¹ • x)
This formalizes the natural action of relabeling the elements of X.
Main definitions
MulAction (Equiv.Perm X) (X → Y):
The action of the permutation group on colorings via precomposition.
coloringEquiv (c₁ c₂ : X → Y) : Prop:
Two colorings are equivalent if they lie in the same orbit under this action, i.e.
∃ f : Equiv.Perm X, f • c₁ = c₂.
Main results
smul_eq_iff_mem_stabilizer:
Characterizes when two group actions on the same coloring are equal, showing that
g • c = f • c ↔ f⁻¹ * g ∈ stabilizer c.
coloringEquiv_equivalence:
Proves that coloringEquiv defines an equivalence relation on X → Y.
orbit_size_eq_index:
Reformulates the orbit–stabilizer theorem in the context of colorings:
|orbit c| = |Perm X| / |stabilizer c|
Motivation
These results provide foundational infrastructure for studying Burnside’s lemma and Pólya’s enumeration theorem in Mathlib, where the enumeration of distinct colorings up to symmetry plays a central role. |
t-combinatorics
new-contributor
awaiting-author
merge-conflict
|
113/0 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Polya.lean |
2 |
8 |
['IvanRenison', 'alreadydone', 'github-actions', 'mathlib4-merge-conflict-bot'] |
awainverse assignee:awainverse |
228-70939 7 months ago |
237-28082 237 days ago |
39-49182 39 days |
| 31113 |
ZihuiBai author:ZihuiBai |
feat(Mathlib/Combinatorics/Enumerative/Polya.lean): Add additional theorem in `Polya.lean` |
---
- [ ] depends on: #30525
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
blocked-by-other-PR
merge-conflict
|
302/0 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Polya.lean |
2 |
4 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
b-mehta assignee:b-mehta |
228-70815 7 months ago |
238-6841 238 days ago |
16-82714 16 days |
| 24441 |
MrSumato author:MrSumato |
feat(Data/List): add Lyndon-Schutzenberger theorem on list commutativity |
Add Lyndon-Schutzenberger theorem on list commutativity. Included definition for List.repeatSelf that returns list repeated n times.
---
This is my first mathlib PR, so any comments are highly appreciated.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-data
new-contributor
|
129/1 |
Mathlib.lean,Mathlib/Data/List/Commutativity.lean,Mathlib/Data/List/Defs.lean,Mathlib/Data/List/Lemmas.lean |
4 |
38 |
['MrSumato', 'github-actions', 'grunweg', 'madvorak', 'mathlib4-merge-conflict-bot', 'plp127'] |
grunweg assignee:grunweg |
228-66417 7 months ago |
411-6361 411 days ago |
29-59355 29 days |
| 31147 |
daefigueroa author:daefigueroa |
feat(Dynamics): point transitive monoid actions and transitive points |
We define point transitivity for a monoid action on a topological space and define the set of transitive points. We add some basic lemmas and implications between topological transitivity and point transitivity.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com/ if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #28001
[](https://gitpod.io/from-referrer/) |
t-dynamics
new-contributor
awaiting-author
|
114/6 |
Mathlib/Dynamics/Transitive.lean |
1 |
6 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'sgouezel'] |
sgouezel assignee:sgouezel |
226-5250 7 months ago |
226-5250 226 days ago |
18-38983 18 days |
| 31987 |
saodimao20 author:saodimao20 |
feat: add monotonicity and relation lemmas for mgf and cgf |
Add two lemmas about moment-generating and cumulant-generating functions:
- `mgf_mono_in_t_of_nonneg`: For nonnegative random variables, the mgf is monotone in the parameter `t`
- `cgf_zero_of_mgf_one`: The cgf equals zero iff the mgf equals one
These lemmas are useful for studying properties of mgf and cgf in probability theory.
Contributed by sequential-intelligence-lab(SIL), University of Virginia
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
new-contributor
awaiting-author
|
21/0 |
Mathlib/Probability/Moments/Basic.lean |
1 |
5 |
['DavidLedvinka', 'github-actions'] |
RemyDegenne assignee:RemyDegenne |
219-83756 7 months ago |
219-83756 219 days ago |
21-31799 21 days |
| 32938 |
0xTerencePrime author:0xTerencePrime |
feat(Order/LocallyFinite): prove DenselyOrdered and LocallyFiniteOrder are incompatible |
## Summary
This PR proves that a nontrivial densely ordered linear order cannot be locally finite.
## Main results
* `not_locallyFiniteOrder`: A densely ordered locally finite linear order must be subsingleton.
* `not_locallyFiniteOrder_of_nontrivial`: The main theorem - incompatibility of the two properties.
Note: This implementation imports `Mathlib.Order.Interval.Set.Infinite` to reuse the existing `Set.Icc_infinite` theorem, ensuring standard library consistency.
## Mathematical content
The key insight is that in a densely ordered type, we can always find a new element between any two distinct elements. This means any nontrivial interval contains infinitely many elements. However, `LocallyFiniteOrder` requires intervals to be finite. This contradiction implies that such a type cannot exist (unless it is trivial).
## Motivation
This resolves a TODO mentioned in #7987 (Data/Finset/LocallyFinite entry).
## Verification
- [x] `lake build Mathlib.Order.LocallyFinite.Basic` passes
- [x] `lake exe runLinter Mathlib.Order.LocallyFinite.Basic` passes
|
t-order
new-contributor
awaiting-author
|
28/0 |
Mathlib/Order/Interval/Finset/Basic.lean |
1 |
10 |
['0xTerencePrime', 'CoolRmal', 'github-actions', 'jcommelin', 'plp127'] |
nobody |
215-20758 7 months ago |
215-20798 215 days ago |
3-22290 3 days |
| 32698 |
farruhx author:farruhx |
feat(List): add aesop / simp annotations to selected lemmas for improved automation |
This PR adds `@[aesop safe]` and `@[simp]` annotations to a set
of List lemmas whose proofs are routine and benefit from standardized
automation. No statements or definitions are changed; only proof annotations
are added.
The lemmas updated in this PR are:
* `or_exists_of_exists_mem_cons`
* `append_subset_of_subset_of_subset`
* `map_subset_iff`
* `append_eq_has_append`
* `append_right_injective`
* `append_left_injective`
* `reverse_surjective`
* `reverse_bijective`
* `mem_getLast?_append_of_mem_getLast?`
* `mem_dropLast_of_mem_of_ne_getLast`
* `idxOf_eq_length_iff`
* `idxOf_append_of_mem`
* `length_eraseP_add_one`
The goal is to make these commonly used lemmas easier for `aesop`-based
automation to resolve, while avoiding any interference with simp-normal-form
lemmas or canonical rewrite rules.
There are no API changes and no new theorems—only improved automation behavior. |
t-data
new-contributor
awaiting-author
|
18/1 |
Mathlib/Data/List/Basic.lean |
1 |
8 |
['artie2000', 'euprunin', 'farruhx', 'github-actions'] |
pechersky assignee:pechersky |
214-55527 7 months ago |
214-55527 214 days ago |
7-31364 7 days |
| 27817 |
zhuyizheng author:zhuyizheng |
feat: add IMO2025P1 |
Add a solution to IMO2025P1, the original problem statement from https://github.com/jsm28/IMOLean
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
IMO
awaiting-author
new-contributor
merge-conflict
|
1310/0 |
Archive.lean,Archive/Imo/Imo2025Q1.lean |
2 |
9 |
['github-actions', 'kim-em', 'mathlib4-merge-conflict-bot', 'zhuyizheng'] |
dwrensha assignee:dwrensha |
214-1324 7 months ago |
273-52292 273 days ago |
54-75088 54 days |
| 33218 |
Blackfeather007 author:Blackfeather007 |
feat(Algebra): Define the associated graded ring to filtered ring |
Define the associated graded ring to a filtered ring.
---
- [ ] depends on: #33217
migrated from https://github.com/leanprover-community/mathlib4/pull/26858 |
t-ring-theory
new-contributor
blocked-by-other-PR
|
450/0 |
Mathlib.lean,Mathlib/RingTheory/FilteredAlgebra/AssociatedGraded.lean |
2 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
211-33989 6 months ago |
211-39274 211 days ago |
0-132 2 minutes |
| 33219 |
Blackfeather007 author:Blackfeather007 |
feat(Algebra): Define associated graded algebra |
Define the associated graded algebra of a filtered algebra, constructed from a special case of associated graded ring.
---
- [ ] depends on: #33218
migrated from #26859
|
t-ring-theory
new-contributor
blocked-by-other-PR
|
563/0 |
Mathlib.lean,Mathlib/RingTheory/FilteredAlgebra/AssociatedGraded.lean |
2 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
211-33881 6 months ago |
211-39048 211 days ago |
0-133 2 minutes |
| 33220 |
Blackfeather007 author:Blackfeather007 |
feat(Algebra): Define associated graded module |
Define the associated graded module to a filtered module.
---
- [ ] depends on: #33218
migrated from #26860
|
t-ring-theory
new-contributor
blocked-by-other-PR
|
669/0 |
Mathlib.lean,Mathlib/RingTheory/FilteredAlgebra/AssociatedGraded.lean |
2 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
211-33797 6 months ago |
211-38860 211 days ago |
0-137 2 minutes |
| 33227 |
Blackfeather007 author:Blackfeather007 |
feat(Algebra): exact of associated graded exact |
We proved that a chain complex is exact if its associated graded complex is exact.
Co-authored-by: Huanyu Zheng @Yu-Misaka [suzuka@misaka-yu.com](mailto:suzuka@misaka-yu.com)
Co-authored-by: Yi Yuan @yuanyi-350 [kysyy1@126.com](mailto:kysyy1@126.com)
Co-authored-by: Weichen Jiao @AlbertJ-314 [albertjiao314@gmail.com](mailto:albertjiao314@gmail.com)
---
- [ ] depends on: #33226
migrated from #26869 |
t-ring-theory
new-contributor
blocked-by-other-PR
|
728/0 |
Mathlib.lean,Mathlib/RingTheory/FilteredAlgebra/AssociatedGraded.lean,Mathlib/RingTheory/FilteredAlgebra/Exactness.lean,Mathlib/RingTheory/FilteredAlgebra/FilteredHom.lean |
4 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
211-31469 6 months ago |
211-31470 211 days ago |
0-1208 20 minutes |
| 33226 |
Blackfeather007 author:Blackfeather007 |
feat(Algebra): associated graded exact of exact and strict |
In this file, we define the concept of exhaustive filtrations.
We also prove a AssociatedGradedRingHom sequence is exact iff each GradedPieceHom is exact.
And when a sequence is strict exact, the corresponding AssociatedGradedRingHom sequence is also exact.
Co-authored-by: Huanyu Zheng @Yu-Misaka [suzuka@misaka-yu.com](mailto:suzuka@misaka-yu.com)
Co-authored-by: Yi Yuan @yuanyi-350 [kysyy1@126.com](mailto:kysyy1@126.com)
Co-authored-by: Weichen Jiao @AlbertJ-314 [albertjiao314@gmail.com](mailto:albertjiao314@gmail.com)
---
- [ ] depends on: #33222
migrated from #26868 |
t-ring-theory
new-contributor
blocked-by-other-PR
|
529/0 |
Mathlib.lean,Mathlib/RingTheory/FilteredAlgebra/AssociatedGraded.lean,Mathlib/RingTheory/FilteredAlgebra/Exactness.lean,Mathlib/RingTheory/FilteredAlgebra/FilteredHom.lean |
4 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
211-31467 6 months ago |
211-31468 211 days ago |
0-1431 23 minutes |
| 33225 |
Blackfeather007 author:Blackfeather007 |
feat(Algebra): filtered module hom |
In this PR we defined the filtered semi-linear map for filtered module and the associated graded module hom.
---
- [ ] depends on: #33220
- [ ] depends on: #33223
migrated from #26867 |
t-ring-theory
new-contributor
blocked-by-other-PR
|
1205/0 |
Mathlib.lean,Mathlib/RingTheory/FilteredAlgebra/AssociatedGraded.lean,Mathlib/RingTheory/FilteredAlgebra/FilteredHom.lean |
3 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
211-31466 6 months ago |
211-31467 211 days ago |
0-1805 30 minutes |
| 33224 |
Blackfeather007 author:Blackfeather007 |
feat(Algebra): define filtered alghom |
In this PR, we define the filtered algebra homomorphisms on algebras and prove some basic properties of
them.
---
- [ ] depends on: #33219
- [ ] depends on: #33223
migrated from #26863 |
t-ring-theory
new-contributor
blocked-by-other-PR
|
1055/0 |
Mathlib.lean,Mathlib/RingTheory/FilteredAlgebra/AssociatedGraded.lean,Mathlib/RingTheory/FilteredAlgebra/FilteredHom.lean |
3 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
211-31464 6 months ago |
211-31465 211 days ago |
0-2046 34 minutes |
| 33223 |
Blackfeather007 author:Blackfeather007 |
feat(Algebra): define filtered ring homomorphism |
In this PR, we define the filtered ring morphisms on rings and prove some basic properties of
them.
Co-authored-by: Huanyu Zheng @Yu-Misaka [suzuka@misaka-yu.com](mailto:suzuka@misaka-yu.com)
Co-authored-by: Yi Yuan @yuanyi-350 [kysyy1@126.com](mailto:kysyy1@126.com)
Co-authored-by: Weichen Jiao @AlbertJ-314 [albertjiao314@gmail.com](mailto:albertjiao314@gmail.com)
---
- [ ] depends on: #33218
- [ ] depends on: #33222
migrated from #26862 |
t-ring-theory
new-contributor
blocked-by-other-PR
|
824/0 |
Mathlib.lean,Mathlib/RingTheory/FilteredAlgebra/AssociatedGraded.lean,Mathlib/RingTheory/FilteredAlgebra/FilteredHom.lean |
3 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
211-31461 6 months ago |
211-31464 211 days ago |
0-2257 37 minutes |
| 33222 |
Blackfeather007 author:Blackfeather007 |
feat(Algebra): define filtered add group hom |
In this file we define filtered hom and the corresponding associated graded hom for abelian groups.
Co-authored-by: Huanyu Zheng @Yu-Misaka [suzuka@misaka-yu.com](mailto:suzuka@misaka-yu.com)
Co-authored-by: Yi Yuan @yuanyi-350 [kysyy1@126.com](mailto:kysyy1@126.com)
Co-authored-by: Weichen Jiao @AlbertJ-314 [albertjiao314@gmail.com](mailto:albertjiao314@gmail.com)
---
- [ ] depends on: #33217
migrated from #26861
|
new-contributor
t-ring-theory
blocked-by-other-PR
|
368/0 |
Mathlib.lean,Mathlib/RingTheory/FilteredAlgebra/AssociatedGraded.lean,Mathlib/RingTheory/FilteredAlgebra/FilteredHom.lean |
3 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
211-31460 6 months ago |
211-31461 211 days ago |
0-2387 39 minutes |
| 33163 |
Aaron1011 author:Aaron1011 |
feat: prove subgroup of (M -> Z) is finitely generated |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
awaiting-author
|
5/0 |
Mathlib/RingTheory/DedekindDomain/Dvr.lean |
1 |
2 |
['erdOne', 'github-actions'] |
alreadydone assignee:alreadydone |
206-69548 6 months ago |
206-69548 206 days ago |
5-82139 5 days |
| 33502 |
MrQubo author:MrQubo |
fix(Tactic/ProxyType): Pass params explicitly in proxy_equiv% implementation |
Fix [#mathlib4 > `deriving Fintype` with Prop](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/.60deriving.20Fintype.60.20with.20Prop/with/566118621)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-meta
WIP
|
12/2 |
Mathlib/Tactic/ProxyType.lean,MathlibTest/DeriveFintype.lean |
2 |
7 |
['MrQubo', 'github-actions', 'kmill'] |
kmill assignee:kmill |
199-64663 6 months ago |
199-64664 199 days ago |
0-60133 16 hours |
| 17176 |
arulandu author:arulandu |
feat: integrals and integrability with .re |
Lemmas for swapping order of .re and integration/integrability.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
new-contributor
t-measure-probability
please-adopt
|
49/0 |
Mathlib/MeasureTheory/Function/L1Space.lean,Mathlib/MeasureTheory/Integral/IntegrableOn.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral.lean,Mathlib/MeasureTheory/Integral/SetIntegral.lean |
4 |
32 |
['EtienneC30', 'arulandu', 'github-actions', 'loefflerd'] |
nobody |
197-67661 6 months ago |
645-28498 645 days ago |
9-73631 9 days |
| 33299 |
kingiler author:kingiler |
feat: Add decidable membership for Interval |
Implemented membership and corresponding decidable instance for `Interval`.
Related [#mathlib4 > Proposal: Add decidable membership for Interval](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Proposal.3A.20Add.20decidable.20membership.20for.20Interval/with/565438009).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
new-contributor
t-order
|
16/1 |
Mathlib/Order/Interval/Basic.lean |
1 |
5 |
['Vierkantor', 'eric-wieser', 'github-actions', 'kingiler'] |
Vierkantor assignee:Vierkantor |
194-77967 6 months ago |
194-77967 194 days ago |
13-42146 13 days |
| 33948 |
anivegesana author:anivegesana |
feat(Analysis/Normed/Algebra): matrix exponential of nilpotent matrix |
Where the matrix exponential and nilpotent elements are defined, both the matrix exponential and the nilpotent element exponential. I had to add a different theorem for normed space exponential and the matrix exponential since the right instances wouldn't be synthesized. Help with golfing would be appreciated.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-analysis
|
34/0 |
Mathlib/Analysis/Normed/Algebra/Exponential.lean,Mathlib/Analysis/Normed/Algebra/MatrixExponential.lean |
2 |
1 |
['github-actions'] |
nobody |
189-35320 6 months ago |
189-31948 189 days ago |
0-3444 57 minutes |
| 30391 |
rudynicolop author:rudynicolop |
feat(Data/List): list splitting definitions and lemmas |
This PR continues the work from #24395.
Original PR: https://github.com/leanprover-community/mathlib4/pull/24395 |
t-data
new-contributor
awaiting-author
|
108/2 |
Mathlib/Data/List/Perm/Lattice.lean,Mathlib/Data/List/TakeDrop.lean |
2 |
50 |
['BoltonBailey', 'IlPreteRosso', 'TwoFX', 'Vierkantor', 'github-actions', 'kckennylau', 'mathlib4-merge-conflict-bot', 'rudynicolop'] |
TwoFX assignee:TwoFX |
187-2666 6 months ago |
187-11188 187 days ago |
93-10641 93 days |
| 29282 |
Jlh18 author:Jlh18 |
feat(CategoryTheory): HasColimits instance on Grpd |
Show that the category of groupoids has all small colimits, as a coreflective subcategory of `Cat`, which has all small colimits. The right adjoint of the forgetful functor is the core functor `CategoryTheory.Core.functor`.
- [ ] depends on: #29283 [Core of a category as a functor]
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
blocked-by-other-PR
new-contributor
t-category-theory
|
140/4 |
Mathlib.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/InducedMaps.lean,Mathlib/CategoryTheory/Category/Grpd.lean,Mathlib/CategoryTheory/Core.lean,Mathlib/CategoryTheory/Groupoid/Grpd/Colimit.lean,Mathlib/CategoryTheory/Groupoid/Grpd/Core.lean |
6 |
3 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
185-12746 6 months ago |
322-44530 322 days ago |
0-396 6 minutes |
| 34141 |
gululu996-ui author:gululu996-ui |
feat(Combinatorics/SimpleGraph/Acyclic): finite trees have at least two degree-one vertices |
Add a lemma showing that a finite tree with at least two vertices has at least two vertices of degree 1.
- Introduce a helper lemma `SimpleGraph.Connected.one_le_degree` for connected graphs on a nontrivial finite type.
- Prove the leaf-count lower bound via the degree-sum identity and a counting argument.
---
|
awaiting-author
new-contributor
t-combinatorics
|
72/2 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean |
1 |
9 |
['IvanRenison', 'SnirBroshi', 'github-actions', 'vlad902'] |
nobody |
180-82289 5 months ago |
182-63725 182 days ago |
1-23617 1 day |
| 31377 |
CoolRmal author:CoolRmal |
feat: a series of smooth functions that converges (locally) uniformly is smooth |
The main theorem is the proof that an infinite sum of $C^n$ functions on a one-dimensional domain which converges locally uniformly is $C^n$ and related results.
This should be compared with [contDiff_tsum](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Analysis/Calculus/SmoothSeries.html#contDiff_tsum) where the same result is proved for functions on an arbitrary domain but with a slightly stronger convergence assumption.
The main motivation for this PR is the [#mathlib4 > Tychonov's Counterexample for the Heat Equation](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Tychonov's.20Counterexample.20for.20the.20Heat.20Equation/with/547367912).
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
awaiting-author
merge-conflict
|
110/18 |
Mathlib/Analysis/Calculus/SmoothSeries.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Cotangent.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/QExpansion.lean,Mathlib/Topology/Algebra/InfiniteSum/TsumUniformlyOn.lean,Mathlib/Topology/Algebra/InfiniteSum/UniformOn.lean |
5 |
20 |
['CoolRmal', 'github-actions', 'mathlib4-merge-conflict-bot', 'ocfnash', 'sgouezel'] |
ocfnash assignee:ocfnash |
174-64387 5 months ago |
235-81352 235 days ago |
8-15343 8 days |
| 34130 |
FlAmmmmING author:FlAmmmmING |
feat(Combinatorics/SimpleGraph/Acyclic): Add new theorem `isTree_iff_uniqueShortest_path` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-combinatorics
new-contributor
|
28/1 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean |
1 |
9 |
['IvanRenison', 'github-actions', 'metakunt', 'vlad902'] |
nobody |
173-23915 5 months ago |
182-7930 182 days ago |
2-6824 2 days |
| 32609 |
PrParadoxy author:PrParadoxy |
feat(LinearAlgebra/PiTensorProduct): Relation between nested tensor products and tensor products indexed by dependent sums |
Product tensors in `⨂ j : (Σ i, β i), s j.fst j.snd` can be mapped to
product tensors in `⨂ i, ⨂ b : β i, s i b`. If the outer index type is
finite, the two types are equivalent.
This allows the definition of endomorphisms on PiTensorProducts by
specifying them on disjoint subsets of the index set. Such constructions
are common e.g. in quantum circuits, quantum cellular automata, and
renormalization procedures.
---
WIP.
This PR contains two "requests for comments". Essentially:
* Is a single complex-to-define linear equivalence preferable over
several less complex ones, which might however be of limited interest
by themselves?
* Which trade-offs are appropriate to make things computable?
- [ ] depends on: #32608
- [x] depends on: #32600
- [x] depends on: #32598
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
blocked-by-other-PR
merge-conflict
t-algebra
label:t-algebra$ |
683/0 |
Mathlib.lean,Mathlib/Data/Sigma/Basic.lean,Mathlib/LinearAlgebra/Multilinear/Basic.lean,Mathlib/LinearAlgebra/PiTensorProduct/Nested.lean,Mathlib/LinearAlgebra/PiTensorProduct/Set.lean |
5 |
5 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
171-61720 5 months ago |
225-62158 225 days ago |
0-2004 33 minutes |
| 30260 |
imbrem author:imbrem |
feat(CategoryTheory/Monoidal): added CocartesianMonoidalCategory |
As discussed in #21603 and #28718; this implements chosen finite coproducts on top of `AddMonoidalCategory` as defined in #30150
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #30150
[](https://gitpod.io/from-referrer/)
|
merge-conflict
blocked-by-other-PR
large-import
new-contributor
t-category-theory
|
839/125 |
Mathlib.lean,Mathlib/CategoryTheory/Monoidal/Category.lean,Mathlib/CategoryTheory/Monoidal/Cocartesian/Basic.lean,Mathlib/CategoryTheory/Monoidal/Discrete.lean,Mathlib/Tactic/ToAdditive/GuessName.lean |
5 |
4 |
['github-actions', 'imbrem', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
171-14151 5 months ago |
289-52148 289 days ago |
0-206 3 minutes |
| 30258 |
imbrem author:imbrem |
feat(CategoryTheory/Monoidal): to_additive for proofs using `monoidal` |
Building on #30150, this allows us to use `@[to_additive]` on proofs containing `monoidal`, by tagging the lemmas `monoidal` outputs with `@[to_additive]` as appropriate.
Testing on my branch [`additive-monoidal-coherence`](https://github.com/imbrem/mathlib4/tree/additive-monoidal-coherence) shows that this works.
It is still future work to have either the `monoidal` tactic or a new `add_monoidal` tactic work for `AddMonoidalCategory` instances directly.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #30150
[](https://gitpod.io/from-referrer/)
|
merge-conflict
blocked-by-other-PR
large-import
new-contributor
t-category-theory
|
524/140 |
Mathlib/CategoryTheory/Monoidal/Category.lean,Mathlib/CategoryTheory/Monoidal/Discrete.lean,Mathlib/Tactic/CategoryTheory/Monoidal/Normalize.lean,Mathlib/Tactic/CategoryTheory/Monoidal/PureCoherence.lean,Mathlib/Tactic/CategoryTheory/MonoidalComp.lean,Mathlib/Tactic/ToAdditive/GuessName.lean |
6 |
3 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
171-14144 5 months ago |
289-56773 289 days ago |
0-241 4 minutes |
| 31102 |
JOSHCLUNE author:JOSHCLUNE |
feat: require LeanHammer |
Experimenting with adding LeanHammer as a mathlib dependency
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
new-contributor
t-meta
|
61/4 |
Mathlib/Tactic/Common.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean,MathlibTest/Hammer.lean,lake-manifest.json,lakefile.lean |
5 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
171-4626 5 months ago |
246-47829 246 days ago |
0-150 2 minutes |
| 34053 |
christian-oudard author:christian-oudard |
feat: Add error function (erf) and complementary error function (erfc) |
## Summary
I was doing some finance math and needed the Error Function, so I thought I'd contribute it.
### Main definitions
* `Real.erf`: The error function, defined as `(2/√π) ∫₀ˣ e^(-t²) dt`
* `Real.erfc`: The complementary error function, defined as `1 - erf x`
### Main results
* `Real.erf_zero`: `erf 0 = 0`
* `Real.erf_neg`: `erf` is an odd function: `erf (-x) = -erf x`
* `Real.erf_tendsto_one`: `erf x → 1` as `x → ∞`
* `Real.erf_tendsto_neg_one`: `erf x → -1` as `x → -∞`
* `Real.erf_le_one`: `erf x ≤ 1` for all `x`
* `Real.neg_one_le_erf`: `-1 ≤ erf x` for all `x`
* `Real.deriv_erf`: `deriv erf x = (2/√π) * exp(-x²)`
* `Real.differentiable_erf`: `erf` is differentiable
* `Real.continuous_erf`: `erf` is continuous
* `Real.strictMono_erf`: `erf` is strictly monotone
Also adds `erf` to `docs/overview.yaml` under Special Functions.
---
- [x] Builds successfully
- [x] `lake exe runLinter` passes
- [x] `lake exe mk_all --check` passes |
t-analysis
new-contributor
awaiting-author
|
333/0 |
Mathlib.lean,Mathlib/Analysis/SpecialFunctions/Erf.lean,docs/overview.yaml |
3 |
18 |
['SnirBroshi', 'christian-oudard', 'github-actions', 'j-loreaux', 'plp127'] |
j-loreaux assignee:j-loreaux |
168-42055 5 months ago |
168-78908 168 days ago |
14-69133 14 days |
| 33601 |
nielstron author:nielstron |
feat(Computability/ContextFreeGrammar): Concatenation of CFGs is CFG |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #33599
- [ ] depends on: #33592
[](https://gitpod.io/from-referrer/)
|
t-computability
new-contributor
blocked-by-other-PR
|
941/0 |
Mathlib/Computability/ContextFreeGrammar.lean |
1 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
168-19768 5 months ago |
198-3631 198 days ago |
0-412 6 minutes |
| 34394 |
Citronhat author:Citronhat |
feat(Algebra/Order/Ring): add constructors for linear ordered rings |
Add constructors for ordered rings from `mul_nonneg` / `mul_pos` that derive `ZeroLEOneClass` from a linear order. |
new-contributor
t-algebra
awaiting-author
label:t-algebra$ |
31/14 |
Mathlib/Algebra/Order/Ring/Defs.lean,Mathlib/RingTheory/HahnSeries/Lex.lean |
2 |
6 |
['Citronhat', 'Vierkantor', 'github-actions', 'leanprover-radar'] |
Vierkantor assignee:Vierkantor |
166-12130 5 months ago |
166-12130 166 days ago |
12-25418 12 days |
| 33493 |
michelsol author:michelsol |
feat(RingTheory/Polynomial): An explicit formula for the Chebyshev polynomials of the first kind |
Adds the following explicit formula on the Chebyshev polynomial of the first kind of order n.
${ T_{n}(x)\ =\ \sum \limits _{k=0}^{\lfloor {\frac {n}{2}}\rfloor } {\binom {n}{2k}} \left(\ X^{2}-1\ \right)^{k}\ X^{n-2k}}$
This explicit formula can be found [here](https://en.wikipedia.org/wiki/Chebyshev_polynomials#Explicit_expressions). There is a proof using complex numbers but it only works if the ring R = ℂ.
The proof here is by induction and works in a commutative ring R.
Mathlib seems to extend the definition of Chebyshev polynomials for $n \in \mathbb{Z}$ but this would make the formula more cumbersome with `n.natAbs` in place of `n`'s, so I expressed it on `n : ℕ` directly.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
awaiting-author
|
51/1 |
Mathlib/RingTheory/Polynomial/Chebyshev.lean |
1 |
8 |
['YuvalFilmus', 'erdOne', 'github-actions', 'metakunt', 'michelsol'] |
chrisflav assignee:chrisflav |
164-48369 5 months ago |
164-48369 164 days ago |
35-16104 35 days |
| 26986 |
WangYiran01 author:WangYiran01 |
feat(Partition): add bijection for partitions with max part ≤ r |
This PR adds a new theorem `partition_max_equals_bound` to `Mathlib.Combinatorics.Enumerative.Partition`.
It constructs a bijection between:
- The set of partitions of `n` in which `r ∈ π.parts` and all parts are `≤ r`, and
- The set of partitions of `n - r` whose largest part is at most `r`.
This provides a constructive proof via removing/adding `r` from/to the partition multiset, in line with classical enumerative combinatorics.
Contributed by Yiran Wang.
|
awaiting-author
t-combinatorics
new-contributor
merge-conflict
|
92/0 |
Mathlib/Combinatorics/Enumerative/Partition/Basic.lean,Mathlib/Data/Multiset/Lattice.lean |
2 |
20 |
['WangYiran01', 'github-actions', 'jcommelin', 'kckennylau', 'kim-em', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
b-mehta assignee:b-mehta |
161-83243 5 months ago |
195-19711 195 days ago |
120-67067 120 days |
| 33969 |
goliath-klein author:goliath-klein |
refactor(PiTensorProduct/{InjectiveNorm, ProjectiveNorm}): Currently, injectiveSeminorm = projectiveSeminorm |
**WIP / RFC!**
Arguably, `injectiveSeminorm` should be re-defined in Mathlib. See #34137 and [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/injectiveSeminorm/with/568798261) for context.
In this file, we collect some results about the current definition and a possible alternative.
Contents:
* A theorem `injectiveSeminorm_eq_projectiveSeminorm` formalizing the equality of the current definitions. However, I think it is unlikely that keeping the alternative characterization would be worth the effort. The interesting direction `(L2') ≤ (L1)` follows from `norm_eval_le_projectiveSeminorm` which is still present. The converse direction is [somewhat tautological](https://github.com/leanprover-community/mathlib4/pull/34137). A proof of `(L2) = (L1)` (probably requiring Hahn-Banach) might be more interesting.
* A preliminary implementation of the injective seminorm as commonly understood.
* Sufficient conditions for the multiplicativity property `‖⨂ m i‖_∧ = ∏ ‖m i‖` to hold. This implements a TBD item.
---
Co-authored-by: Davood H. H. Tehrani
[](https://gitpod.io/from-referrer/)
|
WIP
t-analysis
new-contributor
large-import
merge-conflict
|
774/387 |
Mathlib.lean,Mathlib/Analysis/Normed/Module/Dual.lean,Mathlib/Analysis/Normed/Module/HahnBanach.lean,Mathlib/Analysis/Normed/Module/PiTensorProduct/InjectiveSeminorm.lean,Mathlib/Analysis/Normed/Module/PiTensorProduct/LeastReasonable.lean,Mathlib/Analysis/Normed/Module/PiTensorProduct/ProjectiveSeminorm.lean,Mathlib/Analysis/Normed/Operator/Basic.lean,Mathlib/LinearAlgebra/PiTensorProduct.lean |
8 |
3 |
['github-actions', 'goliath-klein', 'mathlib-merge-conflicts'] |
nobody |
160-66593 5 months ago |
188-81697 188 days ago |
0-23 23 seconds |
| 34159 |
wangying11123 author:wangying11123 |
feat(Geometry/Euclidean/Similarity): Add Triangle similarity on oangle |
Add theorems about triangles similarity on oangle |
t-euclidean-geometry
new-contributor
awaiting-author
|
154/1 |
Mathlib/Geometry/Euclidean/Similarity.lean |
1 |
8 |
['LLaurance', 'github-actions', 'jsm28', 'wangying11123'] |
jsm28 assignee:jsm28 |
159-7493 5 months ago |
159-54722 159 days ago |
7-49555 7 days |
| 33050 |
mkaratarakis author:mkaratarakis |
feat: lemmas for the analytic part of the proof of the Gelfond–Schneider theorem |
Lemmas missing for the formalisation of the proof of the Gelfond–Schneider theorem
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
new-contributor
WIP
|
238/0 |
Mathlib.lean,Mathlib/Analysis/Analytic/Basic.lean,Mathlib/Analysis/Analytic/Order.lean,Mathlib/Analysis/Complex/CauchyIntegral.lean,Mathlib/NumberTheory/Transcendental/AnalyticPart.lean,Mathlib/NumberTheory/Transcendental/AnalyticPart2.lean |
6 |
113 |
['SnirBroshi', 'github-actions', 'j-loreaux', 'mkaratarakis', 'riccardobrasca', 'vihdzp'] |
riccardobrasca assignee:riccardobrasca |
157-76273 5 months ago |
168-9130 168 days ago |
6-26374 6 days |
| 33281 |
michelsol author:michelsol |
feat(Analysis/SpecialFunctions/Integrals): integral of 1/sqrt(1-x^2) and its integrability. |
Add the integral of the derivative of arcsin and its integrability.
---
- [ ] depends on: #33280
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
merge-conflict
t-analysis
|
59/0 |
Mathlib/Analysis/SpecialFunctions/Integrability/Basic.lean,Mathlib/Analysis/SpecialFunctions/Integrals/Basic.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/FundThmCalculus.lean |
3 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot'] |
nobody |
157-18180 5 months ago |
208-72405 208 days ago |
0-2872 47 minutes |
| 33712 |
wangying11123 author:wangying11123 |
feat(Geometry/Euclidean/Angle/Unoriented/Projection): Add sameray_orthogonalProjection_vsub_of_angle_lt |
Add sameray_orthogonalProjection_vsub_of_angle_lt
`sameray_orthogonalProjection_vsub_of_angle_lt`
When an angle is acute, the vector to the orthogonal projection lies in the same ray as the given direction vector. |
new-contributor
t-euclidean-geometry
awaiting-author
|
20/0 |
Mathlib/Geometry/Euclidean/Angle/Unoriented/Projection.lean |
1 |
4 |
['JovanGerb', 'github-actions', 'j-loreaux'] |
JovanGerb assignee:JovanGerb |
154-84510 5 months ago |
154-84610 154 days ago |
39-79348 39 days |
| 30667 |
FrederickPu author:FrederickPu |
feat(Mathlib/Algebra/Group/Subgroup/Pointwise): subgroup mul |
Title:
feat: pointwise products for subgroups
Description:
showed the point-wise product of disjoint subgroups is equivalent to their Cartesian product. Based on https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/useful.20group.20theory.20lemmas/with/546738566.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
28/0 |
Mathlib/Algebra/Group/Subgroup/Pointwise.lean |
1 |
23 |
['FrederickPu', 'eric-wieser', 'github-actions', 'plp127', 'tb65536'] |
nobody |
154-83019 5 months ago |
154-84217 154 days ago |
1-24662 1 day |
| 33793 |
LTolDe author:LTolDe |
feat(MeasureTheory/Constructions/Polish/Basic): add lemma AnalyticSet.inter_nonempty_of_nowhereMeagre |
add lemma AnalyticSet.inter_nonempty_of_nowhereMeagre, the main ingredient for the proof of the **Effros' Theorem**, see [#mathlib4 > Effros Theorem](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Effros.20Theorem/with/566543328)
introduce definition of a nowhere meagre set
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
new-contributor
awaiting-author
|
37/0 |
Mathlib/MeasureTheory/Constructions/Polish/Basic.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Topology/GDelta/Basic.lean |
3 |
8 |
['MichaelStollBayreuth', 'erdOne', 'github-actions', 'j-loreaux'] |
kex-y assignee:kex-y |
154-78776 5 months ago |
154-78982 154 days ago |
39-9588 39 days |
| 35313 |
LexinonCraft author:LexinonCraft |
feat: IMO 2025 Q4 |
This adds a solution for problem 4 from the International Math Olympiad 2025.
--- |
IMO
new-contributor
awaiting-author
|
631/0 |
Archive.lean,Archive/Imo/Imo2025Q4.lean |
2 |
4 |
['LexinonCraft', 'github-actions', 'jsm28'] |
jsm28 assignee:jsm28 |
154-48650 5 months ago |
154-48650 154 days ago |
3-30421 3 days |
| 33276 |
NicolaBernini author:NicolaBernini |
feat: Rename List.reverse_perm to List.reverse_perm_self and List.reverse_perm' to List.reverse_perm_iff |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
awaiting-author
t-data
merge-conflict
|
17/15 |
Mathlib/Algebra/BigOperators/Group/List/Basic.lean,Mathlib/Data/Finset/Dedup.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Defs.lean,Mathlib/Data/List/Perm/Lattice.lean,Mathlib/Data/List/Permutation.lean,Mathlib/Data/Multiset/Defs.lean,Mathlib/NumberTheory/Divisors.lean |
8 |
5 |
['Ruben-VandeVelde', 'github-actions', 'mathlib-merge-conflicts'] |
kim-em assignee:kim-em |
154-32394 5 months ago |
205-10667 205 days ago |
4-4467 4 days |
| 34674 |
Citronhat author:Citronhat |
feat(Algebra/Order/Ring): replace ENNReal lemmas with WithTop versions |
* Add `WithTop` versions of basic multiplicative order lemmas.
* Use the new `WithTop` lemmas to replace `ENNReal` proofs and address six TODOs.
* Fix a typo in the `pos_of_ne_zero` alias name. |
new-contributor
t-algebra
merge-conflict
label:t-algebra$ |
46/15 |
Mathlib/Algebra/Order/Monoid/Canonical/Defs.lean,Mathlib/Algebra/Order/Ring/WithTop.lean,Mathlib/Data/ENNReal/Operations.lean |
3 |
5 |
['Citronhat', 'Ruben-VandeVelde', 'github-actions', 'mathlib-merge-conflicts'] |
Ruben-VandeVelde assignee:Ruben-VandeVelde |
154-12128 5 months ago |
154-12129 154 days ago |
17-1225 17 days |
| 33746 |
ster-oc author:ster-oc |
feat(Algebra/Module/ZLattice): align `ZSpan.floor` to `Int.floor` API |
This PR adds some of the existent lemmas about `Int.floor`, `Int.ceil` and `Int.fract` to the `ZSpan` namespace.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
merge-conflict
label:t-algebra$ |
353/145 |
Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/Order/Floor/Ring.lean,Mathlib/Topology/Algebra/Order/Floor.lean |
3 |
8 |
['github-actions', 'joelriou', 'mathlib-merge-conflicts', 'ster-oc'] |
joelriou assignee:joelriou |
149-29026 4 months ago |
149-29026 149 days ago |
30-23357 30 days |
| 31766 |
SuccessMoses author:SuccessMoses |
feat(Topology/EMetricSpace): continuity of arc length |
fixes half of #31751
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-topology
awaiting-author
merge-conflict
|
396/0 |
Mathlib.lean,Mathlib/Topology/EMetricSpace/ArcLength.lean,Mathlib/Topology/EMetricSpace/BoundedVariation.lean |
3 |
40 |
['SnirBroshi', 'SuccessMoses', 'alreadydone', 'github-actions', 'grunweg', 'j-loreaux', 'mathlib-merge-conflicts'] |
nobody |
148-60723 4 months ago |
224-61593 224 days ago |
2-77182 2 days |
| 20238 |
maemre author:maemre |
feat(Computability/DFA): Closure of regular languages under some set operations |
This shows that regular languages are closed under complement and intersection by constructing DFAs for them.
---
Closure under all other operations will be proved when someone adds the proof for DFA<->regular expression equivalence, so they are not part of this PR.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-computability
merge-conflict
awaiting-author
awaiting-zulip
|
159/0 |
Mathlib/Computability/DFA.lean,Mathlib/Computability/Language.lean |
2 |
60 |
['EtienneC30', 'YaelDillies', 'github-actions', 'maemre', 'mathlib4-merge-conflict-bot', 'meithecatte', 'urkud'] |
nobody |
146-19064 4 months ago |
491-83403 491 days ago |
48-67492 48 days |
| 22361 |
rudynicolop author:rudynicolop |
feat(Computability/NFA): nfa closure properties |
Add the closure properties union, intersection and reversal for NFA.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-computability
merge-conflict
awaiting-author
awaiting-zulip
|
218/2 |
Mathlib/Computability/Language.lean,Mathlib/Computability/NFA.lean |
2 |
91 |
['EtienneC30', 'b-mehta', 'ctchou', 'github-actions', 'leanprover-community-bot-assistant', 'meithecatte', 'rudynicolop'] |
nobody |
146-19048 4 months ago |
443-942 443 days ago |
39-60738 39 days |
| 23929 |
meithecatte author:meithecatte |
feat(Computability/NFA): improve bound on pumping lemma |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #25321
[](https://gitpod.io/from-referrer/)
|
t-computability
awaiting-zulip
new-contributor
awaiting-author
|
101/10 |
Mathlib/Computability/EpsilonNFA.lean,Mathlib/Computability/NFA.lean |
2 |
42 |
['YaelDillies', 'dagurtomas', 'github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot', 'meithecatte'] |
nobody |
145-39077 4 months ago |
409-68376 409 days ago |
34-10092 34 days |
| 35128 |
DAE123456 author:DAE123456 |
feat : Define anti_pascal |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
awaiting-author
label:t-algebra$ |
81/0 |
Archive.lean,Archive/Imo/Imo2018Q3.lean |
2 |
5 |
['DAE123456', 'github-actions', 'grunweg', 'vihdzp'] |
nobody |
145-36603 4 months ago |
161-5849 161 days ago |
0-531 8 minutes |
| 8102 |
miguelmarco author:miguelmarco |
feat(Tactic): add `unify_denoms` and `collect_signs` tactics |
This PR adds four new tactics:
- `unify_denoms` tries to put expressions with several divisions in a form with only one division. In the case of fields, it works similarly to `field_simp`, but if the hypothesis about denominators being nonzero are not present, it assumes them, and leaves them as new goals to prove. In that sense, it is an "unsafe" tactic (but can be useful nevertheless, for example when you can't find which exact hypothesis is missing). It also works with expressions of naturals and Euclidean domains, assuming the corresponding hypothesis about the denominators dividing the numerators.
- `unify_denoms!` extends `unify_denoms` to work with (in)equalities, assuming also that the denominators, once in normal form, are positive.
- `collect_signs` works similarly with expressions using sums and substractions: it tries to put them in a form of one sum minus other sum. In the case of working with naturals, it assumes that we never substract a bigger number from a smaller one.
Both are implemented essentially as a macro that combines several rewriting rules. Some new lemmas with the corresponding rules are added.
--- |
please-adopt
new-contributor
merge-conflict
modifies-tactic-syntax
good first issue
t-meta
|
407/0 |
Mathlib.lean,Mathlib/Algebra/EuclideanDomain/Basic.lean,Mathlib/Tactic.lean,Mathlib/Tactic/CollectSigns.lean,Mathlib/Tactic/UnifyDenoms.lean,MathlibTest/unify_denoms.lean,scripts/noshake.json |
7 |
55 |
['Paul-Lez', 'YaelDillies', 'github-actions', 'joneugster', 'kbuzzard', 'mathlib4-merge-conflict-bot', 'miguelmarco'] |
nobody |
145-3375 4 months ago |
433-72247 433 days ago |
17-14109 17 days |
| 35603 |
2500223210-max author:2500223210-max |
feat(GroupTheory/Frattini): add more theorems |
Add some contents about frattini subgroup into Mathlib GroupTheory Frattini.lean,including
* (convenient lemma)A subgroup contained in all maximal subgroup is contained in
the FRattini subgroup
* A subgroup (say H) has a proper complement (meaning for some proper subgroup K,
K and H generate the whole group)if and only if it is not contained
in the Frattini subgroup.
* A group is cyclic iff its Frattini factor(the quotient group wrt Frattini subgroup)
is cyclic.
* The Frattini factor of a finite p-group is elementary abelian(that is,an abelian
group G with Gᵖ={1})
* A finite p-group has trivial Frattini subgroup iff the group is elementary abelian.
* Burnside theorem of Frattini factor of finite p-group.
---
|
new-contributor
t-group-theory
large-import
awaiting-author
|
764/1 |
Mathlib/GroupTheory/Frattini.lean |
1 |
3 |
['github-actions', 'tb65536'] |
nobody |
145-1056 4 months ago |
150-74829 150 days ago |
0-103 1 minute |
| 33791 |
PhoenixIra author:PhoenixIra |
feat: Generalization of FixedPointApproximants to CompletePartialOrder |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This PR provides a generalization of FixedPointApproximants to CompletePartialOrder. Not every theorem can be generalized, as sometimes we require additional conditions (namely `x ≤ f x`) in order to guarantee that the set is directed and thus the supremum is well-defined. This is not necessary in a CompleteLattice.
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
merge-conflict
|
223/100 |
Mathlib/Order/CompletePartialOrder.lean,Mathlib/SetTheory/Ordinal/FixedPointApproximants.lean |
2 |
21 |
['PhoenixIra', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
PhoenixIra and vihdzp assignee:PhoenixIra assignee:vihdzp |
144-65760 4 months ago |
144-65760 144 days ago |
38-12430 38 days |
| 26013 |
tsuki8 author:tsuki8 |
feat(Data/Finset/Card,Data/Set/Finite/Basic): TODO needs a better title |
add `card_bijOn` and `finset_subset_preimage_of_finite_image`
Add `card_bijOn`: proves that for a bijection between finsets, their cardinalities are equal
Add `finset_subset_preimage_of_finite_image`: constructs a finset subset preserving image cardinality
Co-authored-by: Junyu Guo <hagb@hagb.name>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Junyu Guo @Hagb <hagb@hagb.name>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-data
new-contributor
|
15/0 |
Mathlib/Data/Finset/Card.lean,Mathlib/Data/Set/Finite/Basic.lean |
2 |
6 |
['Ruben-VandeVelde', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
142-40771 4 months ago |
386-20504 386 days ago |
13-85893 13 days |
| 35442 |
dhyan-aranha author:dhyan-aranha |
feat: Affine line with doubled origin counter example |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
awaiting-author
t-algebraic-geometry
|
305/0 |
Counterexamples.lean,Counterexamples/AffineLineWithDoubledOrigin.lean,Mathlib/AlgebraicGeometry/Limits.lean,Mathlib/Topology/Category/TopCat/Limits/Pullbacks.lean |
4 |
21 |
['BryceT233', 'chrisflav', 'dhyan-aranha', 'github-actions'] |
nobody |
142-13701 4 months ago |
155-1706 155 days ago |
0-3706 1 hour |
| 14313 |
grhkm21 author:grhkm21 |
feat(RepresentationTheory/FdRep): FdRep is a full subcategory of Rep |
```
/-- Equivalence between `FDRep` and the full subcategory of finite dimensional `Rep`. -/
def equivFiniteDimensional :
FDRep k G ≌ FullSubcategory (fun V : Rep k G ↦ FiniteDimensional k V)
``` |
merge-conflict
t-algebra
t-category-theory
new-contributor
label:t-algebra$ |
47/8 |
Mathlib/RepresentationTheory/FDRep.lean |
1 |
21 |
['fpvandoorn', 'github-actions', 'grhkm21', 'joelriou', 'kim-em', 'mathlib-bors'] |
nobody |
138-9065 4 months ago |
730-61489 730 days ago |
4-83177 4 days |
| 33592 |
nielstron author:nielstron |
feat(Computability/ContextFreeGrammar): mapping between two types of nonterminal symbols |
This PR picks up https://github.com/leanprover-community/mathlib4/pull/15895 and resolves the failing lemma by redefining Good symbols.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
I checked that https://github.com/leanprover-community/mathlib4/pull/13514 builds correctly when based on this build. PR for that is #33599
This is my first contribution please let me know of any changes I should outline.
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-computability
new-contributor
|
160/0 |
Mathlib/Computability/ContextFreeGrammar.lean |
1 |
34 |
['YaelDillies', 'github-actions', 'madvorak', 'nielstron'] |
nobody |
137-84433 4 months ago |
187-26560 187 days ago |
10-68503 10 days |
| 35144 |
daniel-carranza author:daniel-carranza |
feat(CategoryTheory/Enriched): tensor product of enriched categories |
For a braided monoidal category `V`, defines the tensor product of `V`-categories `C` and `D`, and shows that the type of `V`-functors out of the tensor product `C \times D` is equivalent to the type of "enriched bifunctors" `EnrichedBifunctor V C D`.
---
This work originates from infinity-cosmos project, where it is used to formalize the notion of cotensors in an enriched category. There are some additional coherence lemmas in a braided monoidal category which have been added.
Currently, line 209 violates the style guideline that terminal simp calls should not be squeezed. When I tried to replace this with a single `simp`, I get an error message: `maximum recursion depth has been reached`. Any suggestions (either with this or anything else) are greatly appreciated - thank you!
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-category-theory
infinity-cosmos
awaiting-author
|
333/0 |
Mathlib.lean,Mathlib/CategoryTheory/Enriched/TensorProductCategory.lean,Mathlib/CategoryTheory/Monoidal/Braided/Basic.lean |
3 |
12 |
['daniel-carranza', 'emilyriehl', 'github-actions', 'joelriou', 'robin-carlier'] |
nobody |
137-80140 4 months ago |
160-67334 160 days ago |
0-1418 23 minutes |
| 27226 |
xcloudyunx author:xcloudyunx |
feat(Combinatorics/SimpleGraph): Add Subgraph.inclusion_edge_apply_coe and inclusion_edgeSet_apply_coe |
This PR continues the work from #25248.
Original PR: https://github.com/leanprover-community/mathlib4/pull/25248 |
awaiting-author
t-combinatorics
new-contributor
merge-conflict
|
14/0 |
Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
1 |
4 |
['b-mehta', 'github-actions', 'mathlib-merge-conflicts', 'xcloudyunx'] |
b-mehta assignee:b-mehta |
137-71533 4 months ago |
344-51679 344 days ago |
25-83942 25 days |
| 33688 |
Citronhat author:Citronhat |
feat(PMF): add expectation lemmas for Poisson PMF |
This PR adds some basic results about the Poisson distribution, its `PMF`, and its expectation.
**New lemmas:**
* `poissonPMF_apply` — an unfolding lemma for `poissonPMF`.
* `poissonPMFReal_mul_eq_succ_mul` — the standard recursion identity for the Poisson mass function.
* `poissonPMFReal_hasSum_nmul` — shows that `fun n ↦ poissonPMFReal r n * n` has sum `r`.
* `poissonPMF_tsum_nmul` — the corresponding identity at the level of the `PMF`.
* `poissonPMF_coe_tsum_nmul` — the same result after coercion to `ℝ`.
Both `ℝ`-valued and `ℝ≥0∞`-valued formulations are included so that these results can be used conveniently in both Lebesgue and Bochner integration contexts. |
new-contributor
t-measure-probability
awaiting-author
merge-conflict
|
21/0 |
Mathlib/Probability/Distributions/Poisson.lean |
1 |
11 |
['Citronhat', 'DavidLedvinka', 'github-actions', 'mathlib-merge-conflicts', 'urkud'] |
urkud assignee:urkud |
137-53513 4 months ago |
148-68162 148 days ago |
47-76964 47 days |
| 34830 |
parabamoghv author:parabamoghv |
feat(CategoryTheory/Monoidal): add definition of categorical groups |
This PR defines of categorical groups, also known as coherent 2-groups, in mathlib.
Motivation:
Categorical groups are well-studied structures in monoidal category theory, but are not currently available in mathlib. The definitions in this PR follow the existing design patterns used for Category, MonoidalCategory, and BraidedCategory.
This PR focuses on setting up the core structure and notation. Basic lemmas and further developments will be provided in a subsequent PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
new-contributor
WIP
merge-conflict
|
163/0 |
Mathlib.lean,Mathlib/CategoryTheory/Monoidal/CategoricalGroups/Basic.lean |
2 |
27 |
['dagurtomas', 'github-actions', 'mathlib-merge-conflicts', 'parabamoghv', 'robin-carlier'] |
robin-carlier assignee:robin-carlier |
137-41988 4 months ago |
152-24028 152 days ago |
5-13145 5 days |
| 35684 |
spitters author:spitters |
feat(CategoryTheory/MarkovCategory): Kleisli PMF is a Markov category |
Add `Mathlib/CategoryTheory/MarkovCategory/KleisliPMF.lean` showing that `KleisliCat PMF` is a `MarkovCategory`.
Uses `Prod` as tensor and `PUnit` as unit; reuses Mathlib's existing `KleisliCat`, `LawfulMonad PMF`, and `MarkovCategory` infrastructure.
Builds the full instance stack:
MonoidalCategory → BraidedCategory → SymmetricCategory →
CopyDiscardCategory → MarkovCategory
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
new-contributor
awaiting-author
merge-conflict
|
323/1 |
Mathlib.lean,Mathlib/CategoryTheory/MarkovCategory/KleisliPMF.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean |
3 |
6 |
['dagurtomas', 'github-actions', 'mathlib-merge-conflicts', 'spitters'] |
nobody |
133-31269 4 months ago |
145-63514 145 days ago |
2-47211 2 days |
| 36503 |
Mrigna01 author:Mrigna01 |
Add false theorem test file |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
135/0 |
Mathlib/FalseBench/FalseTheorems.lean |
1 |
3 |
['github-actions'] |
nobody |
132-54551 4 months ago |
132-54277 132 days ago |
0-364 6 minutes |
| 14603 |
awueth author:awueth |
feat: degree is invariant under graph isomorphism |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks, and is labeled with `awaiting-review`.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Mathlib has the definition `SimpleGraph.Iso.mapNeighborSet` which is an equivalence between neighbor sets induced by an isomorphism. Would it be beneficial to add the same equivalence for `neighborFinset`?
[](https://gitpod.io/from-referrer/)
|
WIP
t-combinatorics
new-contributor
|
24/0 |
Mathlib/Combinatorics/SimpleGraph/Map/Finite.lean |
1 |
12 |
['SnirBroshi', 'awueth', 'github-actions', 'jcommelin', 'kim-em', 'urkud'] |
nobody |
132-35949 4 months ago |
708-82788 708 days ago |
31-44440 31 days |
| 33599 |
nielstron author:nielstron |
feat(Computability/ContextFreeGrammar): closure under union |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This PR picks up https://github.com/leanprover-community/mathlib4/pull/13514 and resolves the outstanding errors.
- [ ] depends on: #33592
[](https://gitpod.io/from-referrer/)
|
blocked-by-other-PR
t-computability
new-contributor
|
498/0 |
Mathlib/Computability/ContextFreeGrammar.lean |
1 |
2 |
['github-actions', 'mathlib4-dependent-issues-bot'] |
nobody |
132-19386 4 months ago |
187-28245 187 days ago |
10-65787 10 days |
| 9605 |
davikrehalt author:davikrehalt |
feat(Data/Finset & List): Add Lemmas for Sorting and Filtering |
This PR includes several useful lemmas to the Data/Finset and Data/List modules in Lean's mathlib:
1. `toFinset_filter` (List): Shows that filtering commutes with toFinset.
2. `toFinset_is_singleton_implies_replicate` (List): Shows a list with a singleton toFinset is a List.replicate.
3. `filter_sort_commute` (Finset): Sorting and filtering can be interchanged in Finsets.
4. `Sorted.filter` (List): A sorted list stays sorted after filtering.
5. `Sorted.append_largest` (List): Appending the largest element keeps a list sorted.
6. `sort_monotone_map` (Finset): Relates sorting of a Finset after mapping to sorting of a list.
7. `sort_insert_largest` (Finset): Sorting a Finset with an inserted largest element.
8. `sort_range` (Finset): Sorting a range in a Finset equals the corresponding range list.
9. ~~`filter_eval_true` (List): Filtering a list with a predicate always true keeps the list unchanged.~~
10. ~~`filter_eval_false` (List): Filtering with an always-false predicate gives an empty list.~~
11. ~~`pairwise_concat` (List): Iff condition for Pairwise relation in concatenated lists (similar to pairwise_join).~~
12. `list_map_toFinset` (Finset): toFinset commutes with map under injection
---
- [x] depends on: #15952
This is my first PR to mathlib, so I'm not too familiar with etiquette's and more specifically there are two proofs in the PR which uses aesop, and I am not sure if it's frowned upon. I kept the aesop in there for now as I couldn't construct very short proofs otherwise. The sort_range function proof was suggested in https://leanprover.zulipchat.com/#narrow/stream/113489-new-members/topic/Computing.20Finset.20sort.20of.20Finset.20range/near/410346731 by Ruben Van de Velde. Thanks for your time for improving this PR. |
please-adopt
t-data
new-contributor
merge-conflict
awaiting-author
|
71/0 |
Mathlib/Data/Finset/Basic.lean,Mathlib/Data/Finset/Image.lean,Mathlib/Data/Finset/Sort.lean,Mathlib/Data/List/Sort.lean |
4 |
30 |
['YaelDillies', 'davikrehalt', 'eric-wieser', 'github-actions', 'jcommelin', 'urkud', 'vihdzp'] |
nobody |
132-18842 4 months ago |
911-76730 911 days ago |
12-48883 12 days |
| 15720 |
znssong author:znssong |
feat(SimpleGraph): The Bondy-Chvátal theorem |
The proof of the Bondy-Chvátal theorem, with Dirac's theorem and Ore's theorem as its corollary.
- [x] depends on: #15536
- [ ] depends on: #15711
- [ ] depends on: #15578 |
merge-conflict
blocked-by-other-PR
t-combinatorics
new-contributor
|
903/3 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/BondyChvatal.lean,Mathlib/Combinatorics/SimpleGraph/Finite.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Path.lean,Mathlib/Combinatorics/SimpleGraph/Walk.lean,Mathlib/Dynamics/FixedPoints/Basic.lean,Mathlib/Dynamics/FixedPoints/Increasing.lean |
8 |
3 |
['github-actions', 'grunweg'] |
nobody |
129-80228 4 months ago |
709-23202 709 days ago |
0-1791 29 minutes |
| 22314 |
shetzl author:shetzl |
feat: add leftmost derivations for context-free grammars |
Leftmost derivations are often easier to reason about than arbitrary derivations. This PR adds leftmost variants of Rewrites, Produces and Derives to the existing definition of context-free grammars and proves that a string of terminals can be derived iff it can be leftmost derived.
Co-authored-by: Tobias Leichtfried <tobias.leichtfried@tuwien.ac.at>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
awaiting-author
new-contributor
|
383/0 |
Mathlib.lean,Mathlib/Computability/LeftmostDerivation.lean |
2 |
55 |
['YaelDillies', 'github-actions', 'madvorak', 'mathlib4-merge-conflict-bot', 'shetzl'] |
nobody |
129-80192 4 months ago |
439-17088 439 days ago |
72-2963 72 days |
| 30872 |
rudynicolop author:rudynicolop |
feat(Computability/NFA): NFA closure under concatenation |
This PR proves that regular languages are closed under concatenation via a direct construction on `NFA`s without `εNFA` nor ε-transitions. The main new definitions and results include:
- `M1.concat M2`, the concatenation of `NFA`s `M1` and `M2`, a direct construction without ε-transitions.
- Theorem `accepts_concat : (M1.concat M2).accepts = M1.accepts * M2.accepts`, showing the correctness of the construction.
- Theorem `IsRegular.mul`, showing that regular languages are closed under concatenation.
---
- [x] depends on: #31038
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-computability
new-contributor
awaiting-author
|
104/7 |
Mathlib/Computability/NFA.lean |
1 |
67 |
['YaelDillies', 'ctchou', 'eric-wieser', 'github-actions', 'lambda-fairy', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'rudynicolop'] |
nobody |
129-80071 4 months ago |
173-68312 173 days ago |
59-63981 59 days |
| 36587 |
yhx-12243 author:yhx-12243 |
feat(Algebra/GCDMonoid): Distributive lattice structure for Associates in GCDMonoid |
Add a distributive lattice structure for `Associates α` in `GCDMonoid`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
61/3 |
Mathlib.lean,Mathlib/Algebra/GCDMonoid/Basic.lean,Mathlib/Algebra/GCDMonoid/DistribLattice.lean |
3 |
2 |
['github-actions'] |
nobody |
127-85848 4 months ago |
127-84638 127 days ago |
0-2836 47 minutes |
| 35058 |
GrigorenkoPV author:GrigorenkoPV |
chore: move tendsto_{floor,ceil}_at{Top,Bot} |
Moves:
- Topology.Algebra.Order.Floor.tendsto_floor_atTop -> Order.Filter.AtTopBot.Floor.tendsto_floor_atTop
- Topology.Algebra.Order.Floor.tendsto_floor_atBot -> Order.Filter.AtTopBot.Floor.tendsto_floor_atBot
- Topology.Algebra.Order.Floor.tendsto_ceil_atTop -> Order.Filter.AtTopBot.Floor.tendsto_ceil_atTop
- Topology.Algebra.Order.Floor.tendsto_ceil_atBot -> Order.Filter.AtTopBot.Floor.tendsto_ceil_atBot
---
Tracked in #7987
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
awaiting-author
|
22/25 |
Mathlib/Order/Filter/AtTopBot/Floor.lean,Mathlib/Topology/Algebra/Order/Floor.lean |
2 |
3 |
['GrigorenkoPV', 'github-actions', 'j-loreaux'] |
nobody |
126-84497 4 months ago |
133-58271 133 days ago |
27-45743 27 days |
| 35738 |
GrigorenkoPV author:GrigorenkoPV |
perf: remove some `aesop`s and `grind`s |
---
Needs benchmarking. After that I can split it into several smaller portions, if needed.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
awaiting-author
|
236/92 |
Mathlib/Data/Finset/Card.lean,Mathlib/Data/Rel.lean,Mathlib/Data/Set/Lattice/Image.lean,Mathlib/Data/Set/Prod.lean,Mathlib/Logic/Equiv/Prod.lean,Mathlib/Order/Interval/Finset/Basic.lean,Mathlib/Order/KrullDimension.lean,Mathlib/Order/SupIndep.lean |
8 |
7 |
['github-actions', 'mathlib-merge-conflicts', 'themathqueen', 'vihdzp'] |
nobody |
126-71355 4 months ago |
147-12948 147 days ago |
0-45593 12 hours |
| 32745 |
LTolDe author:LTolDe |
feat(Topology/Algebra): add MulActionConst.lean |
add Topology/Algebra/MulActionConst.lean
introduce class `ContinuousSMulConst` for a scalar multiplication that is continuous in the first argument, in analogy to `ContinuousConstSMul`
define `MulAction.ball x U` as the set `U • {x}` given `[SMul G X] (x : X) (U : Set G)`
The lemmas shown here will be useful to prove the **Effros Theorem**, see [zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Effros.20Theorem/with/558712441).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
new-contributor
t-topology
|
117/0 |
Mathlib.lean,Mathlib/Topology/Algebra/MulActionConst.lean |
2 |
8 |
['LTolDe', 'github-actions', 'urkud'] |
nobody |
125-78198 4 months ago |
190-64542 190 days ago |
16-55121 16 days |
| 34028 |
floor-licker author:floor-licker |
feat(SimpleGraph): add max-flow/min-cut weak duality |
This PR introduces a basic s–t flow setup for undirected SimpleGraphs and proves the standard weak-duality
inequality: for any feasible flow f and any s–t cut S, value f ≤ cutCapacity S.
This is a small, self-contained lemma I extracted while working on larger graph-theoretic formalizations, in particular, results that will ultimately rely on a full max-flow/min-cut theorem. The full MFMC equality/existence statement is not included here. This is the weak-duality direction (∀ f S, value f ≤ cutCapacity S).
|
t-combinatorics
new-contributor
|
169/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/MaxFlowMinCut.lean |
2 |
14 |
['SnirBroshi', 'floor-licker', 'github-actions', 'mathlib-merge-conflicts'] |
kmill assignee:kmill |
123-73185 4 months ago |
123-73138 123 days ago |
60-20351 60 days |
| 36825 |
danlyng author:danlyng |
feat(MeasureTheory/Integral/IntegralEqImproper): add Iic variants of nonneg/nonpos derivative integrability and FTC-2 |
Add the `Iic` counterparts of the existing `Ioi` results for automatic integrability of derivatives on semi-infinite intervals and the corresponding corollaries computing the integral value. Additionally, apply minor fixes to existing docstrings.
New declarations:
- `integrableOn_Iic_deriv_of_nonneg` / `integrableOn_Iic_deriv_of_nonneg'`
- `integrableOn_Iic_deriv_of_nonpos` / `integrableOn_Iic_deriv_of_nonpos'`
- `integral_Iic_of_hasDerivAt_of_nonneg` / `integral_Iic_of_hasDerivAt_of_nonneg'`
- `integral_Iic_of_hasDerivAt_of_nonpos` / `integral_Iic_of_hasDerivAt_of_nonpos'`
These mirror `integrableOn_Ioi_deriv_of_nonneg`, `integrableOn_Ioi_deriv_of_nonpos`, `integral_Ioi_of_hasDerivAt_of_nonneg`, `integral_Ioi_of_hasDerivAt_of_nonpos` and their primed variants. |
t-measure-probability
new-contributor
awaiting-author
|
107/9 |
Mathlib/MeasureTheory/Integral/IntegralEqImproper.lean |
1 |
7 |
['EtienneC30', 'github-actions'] |
EtienneC30 assignee:EtienneC30 |
123-4092 4 months ago |
123-4092 123 days ago |
2-67942 2 days |
| 32918 |
michelsol author:michelsol |
feat: define `supEdist` and `supDist` |
Create a new file Topology.MetricSpace.SupDistance and define the supremal distance in (extended) metric spaces. The defined `supEdist` and `supDist` will have similar theory to the already existing `infEdist` and `infDist`. The motivation is to be able to define the radius of a minimal bounding sphere as the infimum of the supDist later.
[zulip discussion here](https://leanprover.zulipchat.com/#narrow/channel/116395-maths/topic/Formalizing.20Jung's.20theorem.20and.20minimal.20bounding.20spheres) |
t-topology
new-contributor
merge-conflict
|
75/0 |
Mathlib.lean,Mathlib/Topology/MetricSpace/SupDistance.lean |
2 |
5 |
['github-actions', 'mathlib4-merge-conflict-bot', 'michelsol', 'urkud'] |
nobody |
123-2104 4 months ago |
197-67064 197 days ago |
21-3598 21 days |
| 33668 |
Citronhat author:Citronhat |
feat(PMF): add lintegral formulas for PMF |
This PR introduces two lemmas describing the `lintegral` of a function with respect to the measure induced by a probability mass function:
- `PMF.lintegral_eq_tsum`
- `PMF.lintegral_eq_sum`
These are the `ℝ≥0∞` analogues of the existing Bochner `integral` formulas `integral_eq_tsum` and `integral_eq_sum`. They could be useful for reasoning about expectations and integrability.
In addition, the proof of `integral_eq_sum` is simplified by deriving it directly from `integral_eq_tsum` using `tsum_fintype`. |
t-measure-probability
new-contributor
awaiting-author
merge-conflict
|
14/5 |
Mathlib/Probability/ProbabilityMassFunction/Integrals.lean |
1 |
3 |
['DavidLedvinka', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
122-49691 4 months ago |
141-14786 141 days ago |
55-73479 55 days |
| 35805 |
adrianmartir author:adrianmartir |
feat(NumberTheory/Divisors): Add `infinite_setOf_divisors_iff` |
This proves that the set of divisors `{ m | m | n }` of a natural number `n` is infinite if and only if `n` is zero. The first proof draft was by @Aristotle-Harmonic.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
new-contributor
awaiting-author
|
10/0 |
Mathlib/NumberTheory/Divisors.lean |
1 |
6 |
['adrianmartir', 'alexjbest', 'github-actions', 'tb65536'] |
tb65536 assignee:tb65536 |
118-83836 3 months ago |
118-83837 118 days ago |
27-18698 27 days |
| 31590 |
SuccessMoses author:SuccessMoses |
chore: tag `commutatorElement_def` with `simp` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-algebra
new-contributor
merge-conflict
label:t-algebra$ |
1/0 |
Mathlib/Algebra/Group/Commutator.lean |
1 |
3 |
['github-actions', 'grunweg', 'mathlib-merge-conflicts'] |
nobody |
118-72505 3 months ago |
251-5040 251 days ago |
0-1762 29 minutes |
| 34722 |
GrigorenkoPV author:GrigorenkoPV |
feat(Data/Finset/RangeDistance): bound distance between elements of `Finset.range` |
---
Rebase of https://github.com/leanprover-community/mathlib4/pull/26347
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-data
awaiting-author
|
34/0 |
Mathlib.lean,Mathlib/Algebra/Order/Group/Unbundled/Abs.lean,Mathlib/Data/Finset/RangeDistance.lean |
3 |
7 |
['GrigorenkoPV', 'Vierkantor', 'github-actions', 'joneugster', 'mathlib-splicebot', 'plp127'] |
pechersky assignee:pechersky |
117-73283 3 months ago |
117-73283 117 days ago |
52-18954 52 days |
| 35857 |
AlexeyMilovanov author:AlexeyMilovanov |
feat(Logic.Equiv.BijectiveBase2): add bijective base-2 numeration |
This PR introduces a formalization of the bijective base-2 numeration system.
Unlike standard binary representation, bijective base-2 avoids the "leading zeros" problem, providing a strict mathematical bijection between natural numbers (`ℕ`) and lists of booleans (`List Bool`).
**Main additions:**
* `Equiv.BijectiveBase2.toBits`: Encodes `ℕ` to `List Bool`.
* `Equiv.BijectiveBase2.ofBits`: Decodes `List Bool` to `ℕ`.
* `equivBijectiveBase2`: The formal `ℕ ≃ List Bool` equivalence.
---
Zulip: [#PR reviews > PR #35857: Bijective Base-2 Numeration](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/PR.20.2335857.3A.20Bijective.20Base-2.20Numeration/with/576336540)
Zulip: [#batteries > Upstreaming Nat.Bits](https://leanprover.zulipchat.com/#narrow/channel/348111-batteries/topic/Upstreaming.20Nat.2EBits/with/580736051)
*(Note: This replaces my previously closed PR to avoid the terminology clash between "Dyadic" and dyadic rationals. The namespace and definitions have been updated accordingly).*
*(Note: Used AI to assist with standardizing proof structures).* |
t-logic
new-contributor
LLM-generated
blocked-by-batt-PR
|
95/0 |
Mathlib.lean,Mathlib/Logic/Equiv/ListNatBijective.lean |
2 |
6 |
['AlexeyMilovanov', 'SnirBroshi', 'github-actions', 'joneugster'] |
nobody |
117-11604 3 months ago |
117-11654 117 days ago |
27-59706 27 days |
| 36463 |
AlexeyMilovanov author:AlexeyMilovanov |
feat(Data.Nat.Bits): add Nat.ofBits and prove bits_injective |
This PR introduces `Nat.ofBitsList` for `List Bool` and provides the missing proofs that the standard binary representation `Nat.bits` is injective (`Nat.bits_injective`) and possesses a right inverse for normalized lists (`Nat.bits_ofBitsList`).
`ofBitsList` is implemented as an `abbrev` using `foldr` (keeping it transparent to tactics like `simp`). It serves as the exact left inverse to `bits`. Furthermore, `bits_ofBitsList` establishes that `bits` and `ofBitsList` form a bijection between `ℕ` and the set of lists with no trailing `false` values.
This avoids the name collision with `Nat.ofBits` from `Batteries` and aligns with previous Zulip discussions (see [here](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/PR.20.2335857.3A.20Bijective.20Base-2.20Numeration)) regarding the utility of having a complete list-based API for `Nat.bits` in the library.
CC: @linesthatinterlace
- Adds `Nat.ofBitsList` (as an `abbrev`)
- Adds `Nat.ofBitsList_bits` (left inverse property)
- Adds `Nat.bits_injective`
- Adds `Nat.ofBitsList_eq_zero_iff` (helper lemma for lists without trailing zeros)
- Adds `Nat.bits_ofBitsList` (right inverse property)
---
Zulip: [#PR reviews > PR #35857: Bijective Base-2 Numeration](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/PR.20.2335857.3A.20Bijective.20Base-2.20Numeration/with/576336540)
Zulip: [#batteries > Upstreaming Nat.Bits](https://leanprover.zulipchat.com/#narrow/channel/348111-batteries/topic/Upstreaming.20Nat.2EBits/with/580736051) |
t-data
new-contributor
awaiting-author
blocked-by-batt-PR
|
68/1 |
Mathlib/Data/Nat/Bits.lean |
1 |
5 |
['github-actions', 'joneugster', 'wrenna-robson'] |
nobody |
117-11597 3 months ago |
123-79709 123 days ago |
9-58085 9 days |
| 34419 |
ster-oc author:ster-oc |
feat(RCLike): add `Continuous.re` and similar |
This PR adds dot notation for `re`, `im`, `conj` and `ofReal` for `Continuous`, `LipschitzWith` and `Memℓp`.
Given `hf : Continuous f` it allows to use `hf.re` to express `Continuous (fun x ↦ (f x).re)`, similarly to the usual `hf.add hg`.
I also can add the same features for `Summable` but I am not sure where to place them, suggestions are appreciated!
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
new-contributor
awaiting-author
merge-conflict
|
186/41 |
Mathlib/Analysis/Normed/Group/Uniform.lean,Mathlib/Analysis/Normed/Lp/lpSpace.lean,Mathlib/Analysis/RCLike/Basic.lean |
3 |
15 |
['github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'ster-oc'] |
j-loreaux assignee:j-loreaux |
113-59066 3 months ago |
147-72821 147 days ago |
8-27645 8 days |
| 30142 |
shalliso author:shalliso |
feat(Topology/Baire): define IsNonMeagre |
non-meagre sets (also known as "of the second category") are worthy of their own definition and API. This was useful to me for formalizing a result of "automatic continuity", that is, a Baire-measurable homomorphism between Polish groups must be continuous. Simply working with the negation of IsMeagre quickly became cumbersome, and non-meagre sets have an important role in the study of Polish (e.g. locally compact) groups.
From https://github.com/shalliso/automatic_continuity
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
merge-conflict
awaiting-author
|
83/1 |
Mathlib/Topology/Baire/NonMeagre.lean,Mathlib/Topology/GDelta/Basic.lean |
2 |
6 |
['github-actions', 'grunweg', 'mathlib4-merge-conflict-bot'] |
nobody |
112-86328 3 months ago |
292-59078 292 days ago |
0-1020 17 minutes |
| 34487 |
martinwintermath author:martinwintermath |
feat(LinearAlgebra/SesquilinearForm): add instances for SeparatingLeft, SeparatingRight and Nondegenerate |
Add typeclass instances for `Fact B.SeparatingLeft`, `Fact B.SeparatingRight`, `Fact B.Nondegenerate`:
* inferring `Fact B.flip.SeparatingLeft` from `Fact B.SeparatingRight` and vice versa
* inferring `Fact B.SeparatingLeft` and `Fact B.SeparatingRight` from `Fact B.Nondegenerate`
* inferring `Fact B.SeparatingLeft` and `Fact B.Nondegenerate` for `.id` and `Dual.eval`
* inferring `Fact B.Nondegenerate` from `B.IsPerfPair`
I also updated `PointedCone.dual_univ` to demonstrate the usefulness of these additions. Note that I needed to add an import to `Cone/Dual.lean` which somehow imports cardinals. So I needed to remove cardinals from `assert_not_exists`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
large-import
label:t-algebra$ |
84/16 |
Mathlib/Geometry/Convex/Cone/Dual.lean,Mathlib/LinearAlgebra/Dual/Lemmas.lean,Mathlib/LinearAlgebra/PerfectPairing/Basic.lean,Mathlib/LinearAlgebra/SesquilinearForm/Basic.lean |
4 |
4 |
['github-actions', 'martinwintermath', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
joelriou assignee:joelriou |
111-4406 3 months ago |
113-83306 113 days ago |
13-75766 13 days |
| 36937 |
Yaohua-Leo author:Yaohua-Leo |
feat(Algebra/Jordan): add first linearization lemmas for IsCommJordan |
[](https://gitpod.io/from-referrer/)
AI assistance disclosure: I used AI assistance for CI/debugging and module-structure fixes in this PR. The mathematical content and main lemmas were written by me, with help from @pelicanhere.
This PR adds a new file `Mathlib/Algebra/Jordan/Linearization.lean` containing linearization lemmas for the commutative Jordan identity.
Main declarations:
* `IsCommJordan.four_nsmul_associator_mul_add`
* `IsCommJordan.associator_mul_add`
These lemmas formalize a first linearization of the commutative Jordan identity using `associator`, following McCrimmon, Proposition 1.8.5.
---
I put these lemmas in a separate file because I expect follow-up linearization lemmas to belong naturally in the same place.
I am also happy to rename declarations or move the file if reviewers would prefer. |
t-algebra
new-contributor
awaiting-author
label:t-algebra$ |
60/0 |
Mathlib.lean,Mathlib/Algebra/Jordan/Linearization.lean |
2 |
6 |
['Yaohua-Leo', 'github-actions', 'grunweg', 'ocfnash'] |
ocfnash assignee:ocfnash |
110-13063 3 months ago |
110-13063 110 days ago |
13-10710 13 days |
| 37695 |
Morten-Ness author:Morten-Ness |
refactor(GroupTheory/Complement): simplify complement proofs |
Simplifies the proofs of:
- `Subgroup.IsComplement'.symm`
- `Subgroup.isComplement_singleton_left`
- `Subgroup.isComplement_singleton_right`
No API changes.
AI assistance: I used Codex/LLM suggestions as a starting point, then manually checked the proofs, and verified the final version locally.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
new-contributor
awaiting-author
|
15/17 |
Mathlib/GroupTheory/Complement.lean |
1 |
4 |
['github-actions', 'tb65536'] |
tb65536 assignee:tb65536 |
106-21237 3 months ago |
106-21237 106 days ago |
0-68801 19 hours |
| 37489 |
michael-novak-math author:michael-novak-math |
feat: add the fundamental theorem of plane curves |
We add to the PlaneCurves file created in PR #36731 a classical result in the subject of differential geometry of plane curves: the fundamental theorem of plane curves.
---------
- [ ] depends on: #36731 |
new-contributor
t-differential-geometry
t-analysis
blocked-by-other-PR
|
651/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/Calculus.lean,Mathlib/Geometry/PlaneCurves.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/FundThmCalculus.lean,docs/references.bib |
5 |
5 |
['github-actions', 'mathlib-dependent-issues', 'michael-novak-math'] |
nobody |
106-11817 3 months ago |
111-83073 111 days ago |
0-13581 3 hours |
| 37111 |
tannerduve author:tannerduve |
feat(Computability): add Nat.PrimrecIn and PrimrecIn |
- Add `Nat.PrimrecIn`: primitive recursive functions relative to a set of oracles
- Add `PrimrecIn`: lifts `Nat.PrimrecIn` to `Primcodable` types
A `PrimrecIn` version of `RecursiveIn.iff_nat` (i.e., `PrimrecIn O (f : ℕ → ℕ) ↔ Nat.PrimrecIn O f`) is left as future work as it requires proving `Nat.PrimrecIn O Nat.pred`, which needs additional API for `Nat.PrimrecIn`.
---
Split out from #34937 as requested in review.
- [x] depends on: #37061 |
t-computability
new-contributor
awaiting-author
|
24/0 |
Mathlib/Computability/RecursiveIn.lean |
1 |
14 |
['Komyyy', 'bryangingechen', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'tannerduve'] |
nobody |
102-65341 3 months ago |
103-78200 103 days ago |
1-79421 1 day |
| 37954 |
jdhart81 author:jdhart81 |
feat(Data/ENNReal/Inv): add ENNReal.div_mul_div_cancel |
Proves a / b * (b / c) = a / c for b ≠ 0, b ≠ ∞ in ENNReal. Proof via mul_div_assoc and existing div_mul_cancel.
AI Disclosure: This PR was developed with assistance from an LLM (Claude, Anthropic) for proof exploration and text drafting. The proof was compiled and verified locally by the contributor, who understands the mathematical content. This lemma is extracted from a larger formalization of information-theoretic bounds (Zenodo DOI: 10.5281/zenodo.19317983).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
5/0 |
Mathlib/Data/ENNReal/Inv.lean |
1 |
2 |
['github-actions'] |
nobody |
101-1800 3 months ago |
101-1798 101 days ago |
0-75 1 minute |
| 35662 |
FrankieeW author:FrankieeW |
feat(NumberTheory/Zsqrtd): add Archimedean instance via le_arch |
This PR follows a suggestion made in #35606 , #35481
- add `Zsqrtd.le_arch_smul` in `Mathlib/NumberTheory/Zsqrtd/Basic.lean`
- use it to provide `instance : Archimedean (ℤ√d)` in the `Nonsquare` section
- refactor the proof using symmetry to reduce duplication while keeping checks clean
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
new-contributor
awaiting-author
merge-conflict
LLM-generated
|
46/4 |
Mathlib/NumberTheory/PellMatiyasevic.lean,Mathlib/NumberTheory/Zsqrtd/Basic.lean |
2 |
13 |
['FrankieeW', 'MichaelStollBayreuth', 'euprunin', 'github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
99-78932 3 months ago |
134-5515 134 days ago |
15-50831 15 days |
| 33032 |
ksenono author:ksenono |
feat(Combinatorics/SimpleGraph): Konig’s theorem on bipartite graphs |
---
<!-- Your PR title will become the first line of the commit message.
Three additions:
* Combinatorics/SimpleGraph/Konig/Auxillary.lean
* Combinatorics/SimpleGraph/Konig/KonigFin.lean
* Combinatorics/SimpleGraph/Konig/Konig.lean
(all other changes are rebased from the PRs below)
- [ ] depends on: #30129
- [ ] depends on: #32552
- [ ] depends on: #32555
- [ ] depends on: #32570
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
blocked-by-other-PR
merge-conflict
|
832/251 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Bipartite.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/DegreeSum.lean,Mathlib/Combinatorics/SimpleGraph/Konig/Auxillary.lean,Mathlib/Combinatorics/SimpleGraph/Konig/Konig.lean,Mathlib/Combinatorics/SimpleGraph/Konig/KonigFin.lean,Mathlib/Combinatorics/SimpleGraph/Matching.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/VertexCover.lean,Mathlib/SetTheory/Cardinal/Arithmetic.lean,Mathlib/SetTheory/Cardinal/Basic.lean |
12 |
9 |
['SnirBroshi', 'github-actions', 'ksenono', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'vlad902'] |
nobody |
99-53494 3 months ago |
216-26382 216 days ago |
0-136 2 minutes |
| 33330 |
michael-novak-math author:michael-novak-math |
feat: add arc-length reparametrization of parametrized curves |
add new definitions of arc-length reparametrization and its corresponding parameter transformation and a theorem establishing the desired properties. |
t-analysis
new-contributor
awaiting-author
|
308/0 |
Mathlib.lean,Mathlib/Analysis/Calculus/ArcLengthReparametrization.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/FundThmCalculus.lean,docs/references.bib |
4 |
57 |
['SnirBroshi', 'github-actions', 'grunweg', 'j-loreaux', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'michael-novak-math'] |
j-loreaux assignee:j-loreaux |
97-8576 3 months ago |
120-23343 120 days ago |
6-70192 6 days |
| 33217 |
Blackfeather007 author:Blackfeather007 |
feat(Algebra): define associated graded structure for abelian group |
In this PR we define the associated graded structure for abelian group when given a filtration and only give some basic lemmas about it.
---
migrated from https://github.com/leanprover-community/mathlib4/pull/26857
|
new-contributor
t-ring-theory
awaiting-author
|
144/0 |
Mathlib.lean,Mathlib/RingTheory/FilteredAlgebra/AssociatedGraded.lean |
2 |
13 |
['Blackfeather007', 'chrisflav', 'erdOne', 'eric-wieser', 'github-actions', 'urkud'] |
erdOne assignee:erdOne |
96-84471 3 months ago |
206-63889 206 days ago |
4-57005 4 days |
| 37938 |
SamuelSchlesinger author:SamuelSchlesinger |
feat(Probability/Posterior): Posterior PMFs and Various Lemmas |
Upstreaming the probability lemmas needed in https://github.com/leanprover/cslib/pull/464. |
t-measure-probability
new-contributor
awaiting-author
|
130/0 |
Mathlib.lean,Mathlib/Probability/ProbabilityMassFunction/Posterior.lean |
2 |
6 |
['EtienneC30', 'SamuelSchlesinger', 'github-actions'] |
RemyDegenne assignee:RemyDegenne |
96-58570 3 months ago |
98-5614 98 days ago |
0-4089 1 hour |
| 38139 |
sidbedi author:sidbedi |
chore(Algebra/MvPolynomial/Variables): golf MvPolynomial.vars_0 to rfl |
---
The classical qualifier and explicit rewrite chain are unnecessary — the result holds definitionally.
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebra
awaiting-author
label:t-algebra$ |
1/2 |
Mathlib/Algebra/MvPolynomial/Variables.lean |
1 |
3 |
['github-actions', 'grunweg'] |
nobody |
96-16630 3 months ago |
96-16630 96 days ago |
0-34567 9 hours |
| 38140 |
sidbedi author:sidbedi |
chore(Data/Analysis/Filter): golf CFilter.ofEquiv_val to rfl |
---
cases F is unnecessary, the result holds definitionally.
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
awaiting-author
|
1/2 |
Mathlib/Data/Analysis/Filter.lean |
1 |
3 |
['github-actions', 'grunweg'] |
nobody |
96-16586 3 months ago |
96-16586 96 days ago |
0-34488 9 hours |
| 38053 |
ntapiam author:ntapiam |
feat(Analysis/Controls): add Control functions |
Add Control functions
----
This PR adds Control functions in the sense of rough paths theory (see e.g. [Friz-Victoir, Section 1.2.1](https://page.math.tu-berlin.de/~friz/master4_May6th.pdf)).
They are related to p-variation norms which are the goal of #38055.
I've shown most results in the above reference though those relating to 1-variation are still a work in progress.
I had to add a few statements about convex functions in order to work over NNReal instead or Real, but I am not sure this is the best way to do it. The reason is that I've defined controls as taking values in NNReal (as they should).
In particular there is
```lean4
theorem nnreal_of_real {f : ℝ≥0 → ℝ≥0}
(hf : ConvexOn ℝ (Set.Ici 0) fun x : ℝ => (f x.toNNReal : ℝ)) : ConvexOn ℝ≥0 ⊤ f
```
which I didn't know where to put. It probably holds in more generality but I didn't check.
I have also included two versions of Controls, one global and one restricted to a set. I tried to follow Mathlib conventions as best as I could but perhaps that could be improved as well.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
t-analysis
new-contributor
|
571/1 |
Mathlib.lean,Mathlib/Analysis/Controls/BoundedVariation.lean,Mathlib/Analysis/Controls/ControlOn.lean,Mathlib/Analysis/Controls/Defs.lean,Mathlib/Analysis/Convex/Function.lean,docs/references.bib |
6 |
4 |
['github-actions', 'ntapiam'] |
nobody |
93-11083 3 months ago |
98-62666 98 days ago |
0-52 52 seconds |
| 36853 |
matthunz author:matthunz |
feat(CategoryTheory/Monoidal/Braded/Traced): add `TracedCategory` class |
Adds a `TracedCategory` class following [A. Joyal and R. Street and D. R. Verity, *Traced monoidal categories*](https://www.cambridge.org/core/journals/mathematical-proceedings-of-the-cambridge-philosophical-society/article/abs/traced-monoidal-categories/2BE85628D269D9FABAB41B6364E117C8#article):
```lean
/-- A traced symmetric monoidal category. -/
class TracedCategory
(C : Type u)
[Category.{v} C]
[MonoidalCategory.{v} C]
[SymmetricCategory.{v} C] where
/-- The trace operator. -/
trace : ∀ {A B : C} (W : C), (A ⊗ W ⟶ B ⊗ W) → (A ⟶ B)
/-- Left tightening: sliding a morphism past the trace on the left. -/
trace_naturality_left : ∀ {A A' B : C} (W : C) (f : A' ⟶ A) (g : A ⊗ W ⟶ B ⊗ W),
trace W (f ▷ W ≫ g) = f ≫ trace W g := by cat_disch
/-- Right tightening: sliding a morphism past the trace on the right. -/
trace_naturality_right : ∀ {A B B' : C} (W : C) (f : A ⊗ W ⟶ B ⊗ W) (g : B ⟶ B'),
trace W (f ≫ g ▷ W) = trace W f ≫ g := by cat_disch
/-- Sliding: an endomorphism on the feedback wire slides past the trace. -/
trace_dinaturality : ∀ {A B W : C} (f : A ⊗ W ⟶ B ⊗ W) (h : W ⟶ W),
trace W (f ≫ B ◁ h) = trace W (A ◁ h ≫ f) := by cat_disch
/-- Superposing: trace commutes with left tensoring by a bystander object. -/
trace_superposing : ∀ {A B : C} (C' W : C) (f : A ⊗ W ⟶ B ⊗ W),
C' ◁ trace W f = trace W ((α_ C' A W).hom ≫ C' ◁ f ≫ (α_ C' B W).inv) := by cat_disch
/-- Vanishing I: trace over the tensor unit is the morphism itself (up to unitors). -/
trace_vanishing_one : ∀ {A B : C} (f : A ⊗ 𝟙_ C ⟶ B ⊗ 𝟙_ C),
trace (𝟙_ C) f = (ρ_ A).inv ≫ f ≫ (ρ_ B).hom := by cat_disch
/-- Vanishing II: trace over a tensor product equals iterated trace. -/
trace_vanishing_two : ∀ {A B X Y : C} (f : A ⊗ (X ⊗ Y) ⟶ B ⊗ (X ⊗ Y)),
trace (X ⊗ Y) f = trace X (trace Y ((α_ A X Y).hom ≫ f ≫ (α_ B X Y).inv)) := by cat_disch
/-- Yanking: the trace of the braiding is the identity. -/
trace_yanking : ∀ (W : C), trace W (β_ W W).hom = 𝟙 W := by cat_disch
```
## Motivation
`TracedCategory` can be used for denoting things like electric circuits, which require a traced symmetric monoidal category for the wire graph network.
## Future work
- `instance [CompactClosedCategory C] : TracedCategory C`
- possible notation such as `Tr_[W] f`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
new-contributor
awaiting-author
merge-conflict
|
237/0 |
Mathlib.lean,Mathlib/CategoryTheory/Monoidal/Braided/Traced.lean,Mathlib/CategoryTheory/Monoidal/Rigid/Traced.lean,docs/references.bib |
4 |
5 |
['dagurtomas', 'github-actions', 'mathlib-merge-conflicts', 'matthunz'] |
nobody |
88-77484 2 months ago |
124-67047 124 days ago |
0-25956 7 hours |
| 36313 |
SproutSeeds author:SproutSeeds |
feat(Inversion): cobounded tendsto near center |
Part of #5939
Add `tendsto_inversion_nhdsNE_center_cobounded` in `Mathlib/Geometry/Euclidean/Inversion/Basic.lean`, proving `Tendsto (inversion c R) (𝓝[≠] c) (Bornology.cobounded P)` for `R ≠ 0`.
Tools used: Codex 5.3 extra high
---
Happy to adjust naming, placement, or proof style based on maintainer preference.
|
t-euclidean-geometry
new-contributor
LLM-generated
awaiting-author
|
28/0 |
Mathlib/Geometry/Euclidean/Inversion/Basic.lean |
1 |
11 |
['SproutSeeds', 'euprunin', 'github-actions', 'jsm28', 'kbuzzard', 'ocfnash'] |
jsm28 assignee:jsm28 |
88-32791 2 months ago |
120-13642 120 days ago |
6-36700 6 days |
| 36850 |
whocares-abt author:whocares-abt |
feat(Combinatorics/SimpleGraph/Acyclic): deleting leaves from a tree gives a tree |
Added theorem stating Deleting a leaf from a tree produces a tree. |
t-combinatorics
new-contributor
awaiting-author
|
5/0 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean |
1 |
9 |
['YaelDillies', 'github-actions', 'vlad902'] |
YaelDillies assignee:YaelDillies |
86-22362 2 months ago |
86-22472 86 days ago |
38-73648 38 days |
| 26300 |
igorkhavkine author:igorkhavkine |
feat(Analysis/Calculus/FDeriv): continuous differentiability from continuous partial derivatives on an open domain in a product space |
If a function `f : E × F → G` is continuously differentiable, then its partial derivatives along `E` and `F` are also continuous. The non-trivial converse implication holds when the partial derivatives are continuous on an open domain, and they can be added together to give the total derivative of `f`. See this [#mathlib4 > Partial derivatives @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Partial.20derivatives/near/520995477) and the containing thread for some discussion. The PR creates a new import (`Mathlib.Analysis.Calculus.FDeriv.Partial`), where other results about partial derivatives could go in the future.
---
*this is the migration of #25304 to the PR-from-fork workflow*
- [x] depends on: #25564
- [x] depends on: #26273
[](https://gitpod.io/from-referrer/)
|
WIP
new-contributor
awaiting-author
t-analysis
|
347/4 |
Mathlib/Analysis/Calculus/FDeriv/Partial.lean |
1 |
23 |
['YaelDillies', 'agjftucker', 'github-actions', 'igorkhavkine', 'mathlib-merge-conflicts', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'sgouezel'] |
sgouezel assignee:sgouezel |
86-18686 2 months ago |
341-73538 341 days ago |
44-77030 44 days |
| 37774 |
weisbrja author:weisbrja |
fix: change variables in `bicompl` to `Sort*` and add missing theorem mentioned in `bicompl` docs |
[#mathlib4 > Why does Mathlib use Type* instead of Sort* in some places?](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Why.20does.20Mathlib.20use.20Type.2A.20instead.20of.20Sort.2A.20in.20some.20places.3F/with/583882342)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-logic
merge-conflict
|
6/1 |
Mathlib/Logic/Function/Basic.lean |
1 |
8 |
['github-actions', 'kbuzzard', 'leanprover-radar', 'mathlib-merge-conflicts', 'weisbrja'] |
nobody |
85-71889 2 months ago |
85-71890 85 days ago |
19-76858 19 days |
| 31670 |
edwin1729 author:edwin1729 |
feat(Topology/Order): Scott Topology is Sober over Algebraic DCPO |
---
[Zulip discussion](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/.3E.20Algebraic.20complete.20partial.20order.20and.20domain.20theory/with/536359313) here
(2/2) PR to prove result in Stone Duality. Here we prove that Scott Topologies over Algebraic DCPOs are sober.
- [ ] depends on: #31662
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
blocked-by-other-PR
new-contributor
merge-conflict
|
456/1 |
Mathlib.lean,Mathlib/Topology/Order/ScottTopology.lean,Mathlib/Topology/Order/ScottTopologyDCPO.lean,docs/references.bib |
4 |
5 |
['github-actions', 'mathlib-merge-conflicts', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
85-58278 2 months ago |
unknown |
0-0 0 seconds |
| 37445 |
edwin1729 author:edwin1729 |
feat(Topology/Order): set of compact elements, generating basic opens contained in a `Locale.PT`, is directed |
This is (2/4) PRs culminating in a proof that "Scott Topologies over Algebraic DCPOs are Sober". In this PR we prove properties of a certain set of compact elements, w.r.t a `Locale.PT`.
A `Locale.PT` can be thought of as a set of `Opens`. Precisely it is a Frame homomorphism from `Opens _` to `Prop` so we are essentially choosing certain `Opens` to form our set and this set has additional properties. Namely it is a completely prime filter: if the supremum of some Opens is contained than atleast one of the Opens must be contained.
Take some `Locale.PT`, `x`. In this PR, we prove that the set of compact elements generating basic opens (compact elements generate topological basis see #31662) contained in `x` is directed.
This set of compact elements defined above is important in subsequent parts of the proof since it fully determines `x`.
- [ ] depends on: #31662
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
blocked-by-other-PR
new-contributor
merge-conflict
|
296/1 |
Mathlib.lean,Mathlib/Topology/Order/ScottTopology.lean,Mathlib/Topology/Order/ScottTopologyDCPO.lean,docs/references.bib |
4 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
85-54811 2 months ago |
112-79289 112 days ago |
0-463 7 minutes |
| 37556 |
edwin1729 author:edwin1729 |
feat(Topology/Order): Locale.localePointOfSpacePoint if we have a Scott Topology from an Algebraic DCPO |
(3/4) in a series of PRs proving that "Scott Topologies over Algebraic DCPOs are Sober"
We prove here that the unit of the adjunction from `TopCat` to `Locale` defined in `Topology/Order/Category/FrameAdjunction.lean` is a surjective mapping, under the following condition:
The underlying TopologicalSpace must be a Scott Topology generated with an underlying Algebraic DCPO structure.
- [ ] depends on: #37445
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
blocked-by-other-PR
merge-conflict
|
393/1 |
Mathlib.lean,Mathlib/Topology/Order/ScottTopology.lean,Mathlib/Topology/Order/ScottTopologyDCPO.lean,docs/references.bib |
4 |
5 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
85-54810 2 months ago |
110-79310 110 days ago |
0-1300 21 minutes |
| 38560 |
Deicyde author:Deicyde |
feat(Geometry/Manifold): `MfldCat` is a `CartesianMonoidalCategory` |
We prove that the category `MfldCat` of C^n manifolds is a Cartesian monoidal category, and also derive the `BraidedCategory` instance. This PR introduces a new file `Geometry/Manifold/Category/MfldCat/CartesianMonoidal` closely mirroring the structure of `Algebra/Category/Grp/CartesianMonoidal.lean`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #38223
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
blocked-by-other-PR
new-contributor
|
281/0 |
Mathlib.lean,Mathlib/Geometry/Manifold/Category/MfldCat/Basic.lean,Mathlib/Geometry/Manifold/Category/MfldCat/CartesianMonoidal.lean,Mathlib/Geometry/Manifold/ContMDiffMap.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
85-28056 2 months ago |
unknown |
0-0 0 seconds |
| 37814 |
sglasman author:sglasman |
feat: Equivalence between HopfAlgCat R and Hopf (ModuleCat R) |
This PR resolves a TODO by demonstrating an equivalence of categories between two models of the category of Hopf algebras over a commutative ring R, that of Hopf objects in the module category of R and that of types with a `HopfAlgebra R` instance.
---
AI declaration: I consulted with Claude on proof strategies. The proofs were ultimately written by me.
|
new-contributor
large-import
t-category-theory
WIP
|
214/4 |
Mathlib/CategoryTheory/Monoidal/Hopf_.lean,Mathlib/RingTheory/HopfAlgebra/Basic.lean |
2 |
5 |
['dagurtomas', 'github-actions', 'robin-carlier', 'sglasman'] |
kim-em assignee:kim-em |
84-32574 2 months ago |
89-81437 89 days ago |
14-69757 14 days |
| 33478 |
anishrajeev author:anishrajeev |
feat(ModelTheory): define a subset of the topology over complete types |
Define a subset of the Stone Space over a language expanded with countably many constants. Define the proposition to indicate if a language is countable. The subset's density and openness is a future goal to prove (have a branch where it is almost finished), in pursuit of formalizing the proof of the Omitting Types Theorem via properties of Baire spaces.
- [ ] depends on: #32215
- [ ] depends on: #32546 |
t-logic
merge-conflict
new-contributor
|
160/1 |
Mathlib.lean,Mathlib/ModelTheory/Topology/Types.lean,Mathlib/ModelTheory/Types.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean |
4 |
8 |
['NoneMore', 'anishrajeev', 'github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'tb65536'] |
nobody |
83-78814 2 months ago |
191-5955 191 days ago |
10-38484 10 days |
| 33431 |
gululu996-ui author:gululu996-ui |
feat(Combinatorics/SimpleGraph/Bipartite): characterize bipartite simple graphs by even cycles |
Add the classical characterization of bipartite simple graphs: a simple graph is bipartite if and only if every cycle has even length.
Previously, mathlib has the definition of `IsBipartite` for `SimpleGraph` and various lemmas about bipartite graphs, but it does not provide this equivalence in a single theorem, so users have to reprove or reassemble it from existing results.
Prove the forward direction by showing a 2-coloring alternates along any walk, so every cycle must have even length. Prove the converse by showing that if an odd cycle exists then no bipartition is possible, hence if all cycles are even the graph admits a bipartition.
|
new-contributor
t-combinatorics
awaiting-author
merge-conflict
|
186/1 |
Mathlib/Combinatorics/SimpleGraph/Bipartite.lean |
1 |
6 |
['NickAdfor', 'github-actions', 'jcommelin', 'mathlib-merge-conflicts'] |
kmill assignee:kmill |
83-63012 2 months ago |
173-5255 173 days ago |
26-1427 26 days |
| 34940 |
michaellee94 author:michaellee94 |
feat: the graph of a continuous function on a $C^n$ manifold is a $C^n$ manifold |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
new-contributor
awaiting-author
merge-conflict
|
536/0 |
Mathlib.lean,Mathlib/Geometry/Manifold/ChartedSpace.lean,Mathlib/Geometry/Manifold/Instances/Graph.lean,Mathlib/Geometry/Manifold/IsManifold/Basic.lean,Mathlib/Topology/Constructions/Graph.lean |
5 |
80 |
['botbaki-review', 'github-actions', 'grunweg', 'mathlib-merge-conflicts', 'michaellee94', 'ocfnash'] |
ocfnash assignee:ocfnash |
83-61730 2 months ago |
140-62812 140 days ago |
15-3231 15 days |
| 35193 |
Brian-Nugent author:Brian-Nugent |
feat(Topology/Closeds): implement category of closed sets in topological spaces |
I copied over the nice API for working with `TopologicalSpace.Opens` as a category over for `TopologicalSpace.Closeds`. The only thing that did not immediately transfer was `Topology.IsInducing.functorObj` so I omitted it.
Based on work of @kim-em
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
please-adopt
merge-conflict
|
352/6 |
Mathlib.lean,Mathlib/Topology/Category/TopCat/Closeds.lean,Mathlib/Topology/Category/TopCat/Opens.lean |
3 |
24 |
['Brian-Nugent', 'dagurtomas', 'github-actions', 'mathlib-merge-conflicts'] |
dagurtomas assignee:dagurtomas |
83-61605 2 months ago |
123-82118 123 days ago |
17-63465 17 days |
| 36387 |
FrankieeW author:FrankieeW |
feat(NumberTheory/QuadraticField): parameter uniqueness for quadratic fields |
## Summary
Prove that every quadratic field `ℚ(√d)` can be normalized to have a squarefree integer parameter, and that this parameter is unique.
## Main Results
- `Qsqrtd.rescale`: rescaling isomorphism `ℚ(√d) ≃ₐ[ℚ] ℚ(√(a²d))` for `a ≠ 0`
- `Qsqrtd_iso_int_param`: every `ℚ(√d)` is isomorphic to one with an integer parameter
- `Qsqrtd_iso_squarefree_int_param`: every `ℚ(√d)` is isomorphic to one with a squarefree integer parameter
- `Qsqrtd.param_unique`: if `ℚ(√d₁) ≃ₐ[ℚ] ℚ(√d₂)` with both `d₁, d₂` squarefree and `≠ 1`, then `d₁ = d₂`
## Helper Lemmas
- `squarefree_eq_of_rat_sq_mul`: if `d₁ = d₂ · r²` with both squarefree, then `d₁ = d₂`
- `int_dvd_of_ratio_square`: if `d₁/d₂` is a rational square and `d₂` is squarefree, then `d₂ ∣ d₁`
- `not_isSquare_neg_one_rat`: `-1` is not a square in `ℚ`
---
- [ ] depends on: #36347 |
WIP
t-number-theory
blocked-by-other-PR
new-contributor
large-import
LLM-generated
|
400/0 |
Mathlib.lean,Mathlib/Algebra/QuadraticAlgebra/Defs.lean,Mathlib/Algebra/Squarefree/Basic.lean,Mathlib/NumberTheory/QuadraticField/Basic.lean |
4 |
4 |
['FrankieeW', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
81-79468 2 months ago |
135-37320 135 days ago |
0-2 2 seconds |
| 35755 |
Vilin97 author:Vilin97 |
feat(Analysis/ODE): forward Euler method convergence |
WIP
Prove the convergence of the Forward Euler Method. This is the first theorem in most textbooks on numerical analysis for ODEs.
---
The initial proof was produced by [Aristotle](https://aristotle.harmonic.fun). The code was then iteratively refined (factoring out lemmas, golfing, simplifying proofs) using Claude Code (Claude Opus 4.6).
* [ ] depends on: #35753 |
new-contributor
WIP
LLM-generated
merge-conflict
|
404/0 |
Mathlib.lean,Mathlib/Analysis/ODE/EulerMethod.lean,Mathlib/Topology/Algebra/Order/PiecewiseLinear.lean |
3 |
7 |
['Vilin97', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
81-63729 2 months ago |
147-23340 147 days ago |
0-674 11 minutes |
| 36347 |
FrankieeW author:FrankieeW |
feat(NumberTheory/QuadraticField): define quadratic number fields as QuadraticAlgebra ℚ d 0 |
Define `Qsqrtd d` as `QuadraticAlgebra ℚ d 0`, representing the quadratic number field `ℚ(√d)`. Prove trace and norm results, show `Qsqrtd d` is a number field and a quadratic extension when `d` is not a perfect square, and prove that `ℚ(√0)` and `ℚ(√1)` are not fields. Include `IsQuadraticField` as a predicate for quadratic extensions of `ℚ`, and bridge lemmas connecting squarefree integer parameters to the non-square condition.
This PR is part of a series upstreaming the [QuadraticNumberFields](https://github.com/FrankieeW/QuadraticNumberFields) project.
[Zulip discussion](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/quadratic.20number.20fields)
---
### PRs
- #36347 （this PR）
- #36387
---
<!-- The text above the `---` will become the commit message when your PR is merged.
Please leave a blank newline before and after the `---`, otherwise the tooling may
not work correctly.
For details on the requirements for commit messages, see
[Mathlib Commit Conventions](https://leanprover-community.github.io/contribute/commit_conventions.html). -->
<!-- To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are not ready for a review yet, add `[WIP]` to the PR title to mark it as a
work in progress. -->
<!--
### Checklist
-->
<!-- Put an `x` inside `[ ]` to check the box.
- [x] The PR title is in Conventional Commits style (`feat:`, `fix:`, `chore:`, etc.)
and adequate for the final squash-merge commit message
(see [Mathlib Commit Conventions](https://leanprover-community.github.io/contribute/commit_conventions.html)).
If this PR closes an issue, write `Closes #NNNN` in the above PR description. If it doesn't, no action is required.
Zulip discussion link (optional, but very useful):
https://leanprover.zulipchat.com/#narrow/channel/NNN-channel-name/topic/topic.20name --> |
t-number-theory
new-contributor
large-import
awaiting-author
LLM-generated
|
191/0 |
Mathlib.lean,Mathlib/Algebra/QuadraticAlgebra/Defs.lean,Mathlib/Algebra/Squarefree/Basic.lean,Mathlib/NumberTheory/QuadraticField/Basic.lean |
4 |
29 |
['FrankieeW', 'eric-wieser', 'github-actions', 'riccardobrasca', 'tb65536', 'wwylele'] |
tb65536 assignee:tb65536 |
81-59049 2 months ago |
127-86088 127 days ago |
7-10039 7 days |
| 32880 |
0xTerencePrime author:0xTerencePrime |
feat(Analysis/Asymptotics): define subpolynomial growth |
## Main definitions
* `Asymptotics.IsSubpolynomial l f g`: A function `f` has subpolynomial growth with respect to `g` along filter `l` if `f = O(1 + ‖g‖^k)` for some natural `k`.
## Main results
* `IsSubpolynomial.const`: Constant functions have subpolynomial growth
* `IsSubpolynomial.id`: Identity has subpolynomial growth
* `IsSubpolynomial.add`: Closure under addition
* `IsSubpolynomial.neg`: Closure under negation
* `IsSubpolynomial.sub`: Closure under subtraction
* `IsSubpolynomial.mul`: Closure under multiplication
* `IsSubpolynomial.pow`: Closure under powers
* `isSubpolynomial_iff_one_add`: Equivalence with `(1 + ‖g‖)^k` formulation
* `IsSubpolynomial.uniform`: Uniform bounds for finite families
## Implementation notes
The definition uses `1 + ‖g‖^k` rather than `(1 + ‖g‖)^k` as the primary form, with the equivalence established in `isSubpolynomial_iff_one_add`. Four private auxiliary lemmas handle the key inequalities needed for closure proofs.
Closes #32658
|
awaiting-author
t-analysis
new-contributor
|
184/0 |
Mathlib.lean,Mathlib/Analysis/Asymptotics/Subpolynomial.lean |
2 |
29 |
['0xTerencePrime', 'ADedecker', 'github-actions', 'j-loreaux'] |
ADedecker assignee:ADedecker |
80-18985 2 months ago |
190-70956 190 days ago |
22-22665 22 days |
| 38750 |
openendings author:openendings |
feat(Data/Nat): add padicValNat_add_eq_min |
Add lemmas for `padicValNat` mirroring the [e]multiplicity API, including
- padicValNat_eq_of_dvd_of_not_dvd
- padicValNat_add_of_gt
- padicValNat_add_eq_min
---
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
awaiting-author
|
36/0 |
Mathlib/Data/Nat/MaxPowDiv.lean |
1 |
7 |
['Ruben-VandeVelde', 'github-actions', 'openendings'] |
nobody |
79-25427 2 months ago |
79-50923 79 days ago |
3-62762 3 days |
| 38170 |
maddycrim author:maddycrim |
feat(Algebra/Module/FinitePresentation): Finitely Presented Module Lemma |
From FLT Project
Main Definitions:
`Module.FinitePresentation.exists_fin_exact` : A finitely presented module M admits an exact sequence F' -> F -> M -> 0 where F' and F are finite free modules.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
awaiting-author
label:t-algebra$ |
9/0 |
Mathlib/Algebra/Module/FinitePresentation.lean |
1 |
17 |
['chrisflav', 'github-actions', 'maddycrim', 'themathqueen', 'vlad902'] |
nobody |
78-23758 2 months ago |
78-23758 78 days ago |
17-43852 17 days |
| 36896 |
PieterCuijpers author:PieterCuijpers |
feat (Algebra/Order/Quantale): isMulLeftsided, isMulRightsided, isMulTwosided and strict versions |
* Adding definitions of quantale elements being leftsided, rightsided, and twosided, and strict versions
Should we include these definitions in the main Algebra/Order/Quantale.lean file, or start a separate file for them?
I have a few basic theorems I would like to include on these notions, but invite suggestions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
awaiting-author
label:t-algebra$ |
81/1 |
Mathlib/Algebra/Order/Quantale.lean |
1 |
5 |
['NoahW314', 'PieterCuijpers', 'chrisflav', 'github-actions'] |
mariainesdff assignee:mariainesdff |
78-4903 2 months ago |
84-83558 84 days ago |
39-18222 39 days |
| 38960 |
ajhendel author:ajhendel |
chore: remove ℕ+ interval_cases workaround in ADEInequality |
`interval_cases` now supports `ℕ+`, so the manual `Finset.mem_Iio`/`Finset.mem_Ico` + `conv` + `fin_cases` workaround (marked with a porting note) is no longer needed.
Replaces three 3-4 line workaround blocks with `interval_cases p`/`q`/`r`. |
t-number-theory
new-contributor
awaiting-CI
|
3/10 |
Mathlib/NumberTheory/ADEInequality.lean |
1 |
2 |
['github-actions'] |
nobody |
77-7454 2 months ago |
78-8386 78 days ago |
0-105 1 minute |
| 32742 |
LTolDe author:LTolDe |
feat(MeasureTheory/Constructions/Polish/Basic): add class SuslinSpace |
add new class `SuslinSpace` for a topological space that is an analytic set in itself
This will be useful to prove the **Effros Theorem**, see [zulip thread](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Effros.20Theorem/with/558712441).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
awaiting-zulip
t-measure-probability
awaiting-author
|
4/0 |
Mathlib/MeasureTheory/Constructions/Polish/Basic.lean |
1 |
10 |
['ADedecker', 'LTolDe', 'dagurtomas', 'dupuisf', 'github-actions', 'jcommelin'] |
PatrickMassot assignee:PatrickMassot |
75-65049 2 months ago |
196-84450 196 days ago |
11-7507 11 days |
| 39108 |
idontgetoutmuch author:idontgetoutmuch |
feat(Geometry/Manifold/GroupLieAlgebra): Add mfderiv_mul_left_mul and left-translate for integral curves |
Add the following:
`mfderiv_mul_left_mul`: the derivative of left-multiplication satisfies a chain rule:
$$d(L_{g \cdot h})_x = d(L_g)_{h \cdot x} \circ d(L_h)_x$$
`mulInvariantVectorField_mul`: the vector field at the translated point is the push forward of the vector field:
$$V(g \cdot h) = d(L_g)_h(V(h))$$
`IsMIntegralCurve.left_translate`: using these, if $\gamma$ is an integral curve of $V$, then so is $t \mapsto g \bullet \gamma(t)$ for any $g \in G$, since:
$$\frac{d}{dt}(g \bullet \gamma(t)) = d(L_g)_{\gamma(t)}\left(\frac{d\gamma}{dt}(t)\right) = d(L_g)_{\gamma(t)}(V(\gamma(t))) = V(g \bullet \gamma(t))$$
I argue (*) all the time with LLMs so this PR will certainly have had some input from them. Is that enough of a disclosure?
(*) Like Lewis Carroll:
In my youth said the sage I took to the law and argued each case with wife
And the muscular strength that it gave to my jaw has lasted the rest of my life
|
t-differential-geometry
new-contributor
awaiting-author
LLM-generated
|
73/0 |
Mathlib/Geometry/Manifold/GroupLieAlgebra.lean |
1 |
8 |
['github-actions', 'grunweg'] |
nobody |
73-75025 2 months ago |
73-75090 73 days ago |
0-37992 10 hours |
| 39151 |
anovickis author:anovickis |
feat(Analysis/CStarAlgebra/Matrix): IsTopologicalGroup for specialUnitaryGroup |
Adds `ContinuousInv` and `IsTopologicalGroup` instances for `Matrix.specialUnitaryGroup n 𝕜`.
The unitary group `Matrix.unitaryGroup n α` already inherits these via the `unitaryGroup ≡ unitary R` abbrev + existing instances on `unitary R` (in `Mathlib/Topology/Algebra/Star/Unitary.lean`). However, `specialUnitaryGroup` is the sub-Submonoid `unitaryGroup ⊓ MonoidHom.mker detMonoidHom` — it does not auto-inherit those instances since it is not literally an alias of `unitary R`.
### New declarations
- `instance Matrix.specialUnitaryGroup.instContinuousInv` — proven via `Matrix.star_eq_inv` + `continuous_star`
- `instance Matrix.specialUnitaryGroup.instIsTopologicalGroup` — combining `ContinuousMul` (from Submonoid structure) + `ContinuousInv`
Both placed inside the existing `EntrywiseSupNorm` section in `Mathlib/Analysis/CStarAlgebra/Matrix.lean` (the natural neighborhood for matrix-specific topological structure on (special) unitary groups).
### Motivation
These instances enable using `specialUnitaryGroup` as a topological group in homogeneous-space constructions (e.g., `SU(3) ⧸ T = F₂` flag manifolds). They complement #39146 (CompactSpace instances for the same groups) — together giving the standard 'compact topological group' typeclass set on `specialUnitaryGroup`.
### Verification
\`\`\`lean
example : ContinuousInv (Matrix.specialUnitaryGroup (Fin 3) ℂ) := inferInstance -- now works
example : IsTopologicalGroup (Matrix.specialUnitaryGroup (Fin 3) ℂ) := inferInstance -- now works
\`\`\`
Both fail on master without this PR; both succeed after. |
t-analysis
new-contributor
awaiting-author
|
30/0 |
Mathlib/Analysis/CStarAlgebra/Matrix.lean |
1 |
3 |
['github-actions', 'j-loreaux', 'wwylele'] |
nobody |
72-64149 2 months ago |
72-64149 72 days ago |
0-3921 1 hour |
| 39191 |
m13683320924-hue author:m13683320924-hue |
feat: define Asymptotics.IsSubpolynomial |
This PR defines `Asymptotics.IsSubpolynomial l f g`, meaning that `f` is asymptotically bounded by `1 + ‖g‖ ^ k` for some `k : ℕ`.
It also adds basic closure lemmas for constants, addition, multiplication, and natural powers.
Towards #32658.
The formalization was developed with the help of Doubao-Seed-2.0-code and manually checked in Lean.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
t-analysis
new-contributor
|
259/0 |
Mathlib.lean,Mathlib/Analysis/Asymptotics/Subpolynomial.lean |
2 |
3 |
['github-actions'] |
nobody |
72-3707 2 months ago |
72-14668 72 days ago |
0-344 5 minutes |
| 34054 |
YellPika author:YellPika |
feat(Order/OmegaCompletePartialOrder): OmegaCompletePartialOrder instance for `Sigma` with basic `ωScottContinuous` lemmas |
This PR adds an `OmegaCompletePartialOrder` instance for `Sigma` along with `ωScottContinuous` lemmas for basic operations (`mk`, `fst`, `snd`). Appropriate lemmas are marked with `@[fun_prop]` so that the `fun_prop` tactic can automatically deduce `ωScottContinuous` proofs for functions involving `Sigma`s.
---
- [x] depends on: #33941
- [x] depends on: #37258
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
please-merge-master
awaiting-author
|
231/0 |
Mathlib/Data/Sigma/Order.lean,Mathlib/Order/OmegaCompletePartialOrder.lean |
2 |
29 |
['Vierkantor', 'YellPika', 'github-actions', 'grunweg', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
grunweg assignee:grunweg |
71-84859 2 months ago |
151-66110 151 days ago |
16-66871 16 days |
| 39213 |
m13683320924-hue author:m13683320924-hue |
feat: define maximal cliques and independent sets |
This PR adds explicit predicates for maximal cliques and maximal independent sets:
- `SimpleGraph.IsMaximalClique`
- `SimpleGraph.IsMaximalIndepSet`
It also adds conversion lemmas to and from the existing `Maximal G.IsClique` and `Maximal G.IsIndepSet` formulations, plus basic complement and maximum-to-maximal lemmas.
Towards #34962.
The formalization was developed with the help of Doubao-Seed-2.0-code and manually checked in Lean.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
t-combinatorics
new-contributor
LLM-generated
|
60/22 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean |
1 |
3 |
['SnirBroshi', 'github-actions'] |
nobody |
71-69514 2 months ago |
71-77343 71 days ago |
0-389 6 minutes |
| 39165 |
allenhaozhu author:allenhaozhu |
feat(Probability/Moments): add IsSubExponential class |
Add `ProbabilityTheory.IsSubExponential X μ ν b`, the sub-exponential random variable class: `mgf X μ s ≤ exp (s²ν/2)` for `|s| < 1/b`. Mirror the structure of the existing `Mathlib/Probability/Moments/SubGaussian.lean`. Include constructor lemmas (`IsSubExponential.const`, `mono_b`, `mono_nu`) and a tail bound derived through Mathlib's `measure_ge_le_exp_mul_mgf`.
---
## AI-assistance disclosure
Per the Mathlib [AI-use policy](https://leanprover-community.github.io/contribute/index.html#use-of-ai):
- **Tool.** Claude Code (Anthropic) with the Claude Sonnet 4.6 model.
- **Use.** I specified the target lemma statements and the proof strategy; the assistant drafted Lean 4 tactic combinations against current Mathlib. I iterated on the proofs, verified each lemma builds under `lake build` from a clean checkout, and read the final code.
- **Vouching.** I have read every declaration in this file and can defend the proofs without further AI assistance. I welcome reviewer feedback on naming, namespace placement, and stylistic alignment with the surrounding Mathlib modules. |
t-measure-probability
new-contributor
LLM-generated
awaiting-author
|
257/0 |
Mathlib.lean,Mathlib/Probability/Moments/SubExponential.lean |
2 |
4 |
['allenhaozhu', 'github-actions', 'grunweg'] |
nobody |
71-9591 2 months ago |
72-19234 72 days ago |
0-2698 44 minutes |
| 39168 |
allenhaozhu author:allenhaozhu |
feat(Analysis/Convex/Subgradient): add subgradient characterization for |·| and ℓ¹ |
Add `Convex.IsAbsSubgradient x g`, the predicate that `g` is a subgradient of `|·|` at `x`. Prove the standard characterization: the only subgradient at `x > 0` is `1`; at `x < 0` it is `-1`; at `x = 0` the subgradients are exactly `[-1, 1]`. Add `IsL1Subgradient`, the componentwise lift to `Fin n → ℝ` used by ℓ¹-regularized estimation (Lasso KKT).
---
## AI-assistance disclosure
Per the Mathlib [AI-use policy](https://leanprover-community.github.io/contribute/index.html#use-of-ai):
- **Tool.** Claude Code (Anthropic) with the Claude Sonnet 4.6 model.
- **Use.** I specified the target lemma statements and the proof strategy; the assistant drafted Lean 4 tactic combinations against current Mathlib. I iterated on the proofs, verified each lemma builds under `lake build` from a clean checkout, and read the final code.
- **Vouching.** I have read every declaration in this file and can defend the proofs without further AI assistance. I welcome reviewer feedback on naming, namespace placement, and stylistic alignment with the surrounding Mathlib modules. |
t-analysis
new-contributor
LLM-generated
awaiting-author
|
231/0 |
Mathlib.lean,Mathlib/Analysis/Convex/Subgradient/Abs.lean |
2 |
4 |
['allenhaozhu', 'github-actions', 'grunweg'] |
nobody |
71-9589 2 months ago |
72-19319 72 days ago |
0-2608 43 minutes |
| 39279 |
jayscambler author:jayscambler |
feat(Cryptography/Sigma): Schnorr sigma protocol and signature scheme |
Adds `Mathlib/Cryptography/Sigma/Schnorr.lean`. New file in a new top-level directory; mathlib currently has no `Mathlib/Cryptography/`, so I've taken `Mathlib/Cryptography/Sigma/` as the natural home for sigma-protocol formalizations.
The file proves the three defining properties of Schnorr's identification scheme as a sigma protocol:
- `Schnorr.correct`: completeness. Honest verifier accepts honest signer's transcript.
- `Schnorr.specialSoundness`: from two accepting transcripts sharing the commitment but using different challenges `c, c'`, the witness `x = (s - s') / (c - c')` is recovered. Needs `q` prime so `c - c'` is invertible in `ZMod q`.
- `Schnorr.hvzkAccepts`: the HVZK simulator `g^s · (y^c)⁻¹` always yields accepting transcripts. This is the structural-correctness half of HVZK only; the distributional indistinguishability statement is a separate result and not in this PR.
On top of the sigma protocol there's `Schnorr.Signature.{keyGen, sign, verify, correct}` wrapping it as a Fiat-Shamir signature scheme; `Schnorr.Signature.correct` is a one-line corollary of `Schnorr.correct`.
Two auxiliary lemmas, `Schnorr.gpow_sub` and `Schnorr.gpow_mul`, bridge `ZMod q` arithmetic and group exponentiation under `Fintype.card G = q`. They're local to this file for now because the surrounding `gpow` API is itself cryptography-specific; if a general `ZMod q`-graded group action framework lands in mathlib later, both lemmas would become instances of it.
There's also a small `example` instantiating everything on `Multiplicative (ZMod q)` for `Fact q.Prime` to show the API typechecks. That instantiation is a toy (DLOG is trivial in that group), but it confirms the abstraction is usable.
**AI disclosure**: this PR was a collaboration between myself, Grey Haven's autocontext and Claude Opus 4.7 (Anthropic). I read each line and built locally on current master. (strawberry has three r's) |
new-contributor
LLM-generated
|
352/0 |
Mathlib.lean,Mathlib/Cryptography/Sigma/Schnorr.lean |
2 |
2 |
['github-actions'] |
nobody |
69-81830 2 months ago |
69-81909 69 days ago |
69-81863 69 days |
| 31662 |
edwin1729 author:edwin1729 |
feat(Topology/Order): topological basis of scott topology on Complete… |
…PartialOrder
---
[Zulip discussion](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/.3E.20Algebraic.20complete.20partial.20order.20and.20domain.20theory/with/536359313) for this PR.
(2/5) PRs in domain theory, proving that scott topologies over Algebraic DCPOs (`CompletePartialOrder`) are sober.
The main reference is [Renata, Duality in Domain Theory](https://alyata.github.io/documents/duality_domain_theory.pdf). But the statements can also be found in the canonical text [Abramsky and Jung](https://www.cs.ox.ac.uk/people/samson.abramsky/handbook.pdf)
This first PR proves two prerequisites, namely:
- the specialization order induced by the scott topology corresponds to the existing order of the DCPO. Prop 3.1.5 in [Duality in Domain Theory](https://alyata.github.io/documents/duality_domain_theory.pdf) and Prop 2.3.2(1) in [Abramsky and Jung](https://www.cs.ox.ac.uk/people/samson.abramsky/handbook.pdf)
- the upward closures of compact elements of the DCPO form a topological basis for the Scott Topology. Prop 3.5.2 in [Duality in Domain Theory](https://alyata.github.io/documents/duality_domain_theory.pdf) and Prop 2.3.6(2) in [Abramsky and Jung](https://www.cs.ox.ac.uk/people/samson.abramsky/handbook.pdf)
- [x] depends on: #33061
**The next PR is here:** #31670
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
awaiting-author
|
165/1 |
Mathlib.lean,Mathlib/Order/CompactlyGenerated/Basic.lean,Mathlib/Topology/Order/ScottTopology.lean,Mathlib/Topology/Order/ScottTopologyDCPO.lean,docs/references.bib |
5 |
99 |
['b-mehta', 'edwin1729', 'github-actions', 'mathlib-merge-conflicts', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'plp127'] |
b-mehta assignee:b-mehta |
69-72341 2 months ago |
77-73777 77 days ago |
64-31147 64 days |
| 39393 |
jayscambler author:jayscambler |
feat(GameTheory): von Neumann minimax theorem for finite matrix games |
Adds `Mathlib/GameTheory/MatrixGame.lean`. Resolves the TODO at
`Mathlib/Topology/Sion.lean:48` ("spell out the particular case of
von Neumann theorem") by specialising
`Sion.exists_isSaddlePointOn` to the bilinear payoff
`∑ i j, x i * M i j * y j` on the pair of standard simplices.
Two theorems:
- `Matrix.exists_saddle_point`: existence of a saddle point in
mathlib's `IsSaddlePointOn` convention (`a` minimiser-in-`X`,
`b` maximiser-in-`Y`).
- `Matrix.exists_mixedNash`: existence of a mixed Nash equilibrium
in the textbook matrix-game orientation (row player maximises,
column player minimises). Proved by applying Sion to `-payoff M`.
Both forms are useful: the first matches mathlib's existing
saddle-point machinery, and the second is the statement most
game-theory texts use directly.
Supporting lemmas: continuity of the payoff in each argument
(linear in each), and quasi-convexity / quasi-concavity from
`LinearMap.convexOn` / `LinearMap.concaveOn`. The simplex
hypotheses for Sion (`Convex`, `IsCompact`, `Nonempty`) come from
existing mathlib lemmas (`convex_stdSimplex`,
`isCompact_stdSimplex`, `single_mem_stdSimplex`).
Creates a new top-level `Mathlib/GameTheory/` directory; mathlib
currently has none. A natural follow-up would be a
`Mathlib/GameTheory/NormalForm.lean` for general n-player
normal-form games and pure Nash equilibrium.
**AI disclosure**: this PR was a collaboration between myself, Grey
Haven's autocontext and Claude Opus 4.7 (Anthropic). I read each
line and built locally on current master. (strawberry has three r's) |
t-topology
new-contributor
LLM-generated
|
216/2 |
Mathlib.lean,Mathlib/GameTheory/MatrixGame.lean,Mathlib/Topology/Sion.lean |
3 |
3 |
['github-actions', 'vihdzp'] |
nobody |
68-27659 2 months ago |
68-61589 68 days ago |
0-355 5 minutes |
| 22925 |
ggranberry author:ggranberry |
feat(Mathlib/PlaceHolder/ToeplitzHausdorff): Toeplitz-Hausdorff |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
new-contributor
will-close-soon
awaiting-author
help-wanted
t-analysis
|
411/0 |
Mathlib/PlaceHolder/ToeplitzHausdorff.lean,Mathlib/PlaceHolder/ToeplitzHausdorff_v2.lean |
2 |
16 |
['AntoineChambert-Loir', 'faenuccio', 'ggranberry', 'github-actions', 'vihdzp'] |
faenuccio assignee:faenuccio |
68-6186 2 months ago |
491-84095 491 days ago |
3-8649 3 days |
| 39270 |
m13683320924-hue author:m13683320924-hue |
feat: prove strict group homs are stable under Prod.map |
This PR proves that strict group homomorphisms are stable under product maps.
It adds an auxiliary lemma showing that the range restriction of a strict group homomorphism is an open quotient map, and uses it to prove that `MonoidHom.prodMap` preserves `Topology.IsStrictMap`.
Towards #38421.
|
t-topology
new-contributor
|
44/0 |
Mathlib/Topology/Algebra/Group/Basic.lean |
1 |
7 |
['eric-wieser', 'github-actions', 'm13683320924-hue'] |
nobody |
67-76939 2 months ago |
70-66353 70 days ago |
0-1401 23 minutes |
| 37010 |
pion2024 author:pion2024 |
`Sl2`update: add theorem `finrank_weightSpace_eq_one_of_isIrreducible` |
# Background:
I am a 2nd year undergrad student in mathematics currently self-teaching Lie algebra and representation theory.
Before starting the formalization, I searched for related keywords on Zulip and in the GitHub issues and commits. As far as I could tell, there were no existing results or ongoing attempts before I started.
All feedback is welcome. Even a quick check on the statement design/an idea on the generalization (cf Limitations below) would be incredibly helpful.
# Overview
In this PR, I added the new section `IsAlgClosedIrreducible` which formalizes the well-known theorem `finrank_weightSpace_eq_one_of_isIrreducible` for the Lie algebra $\mathfrak{sl}_2$ step by step. It proves that for a finite-dimensional irreducible representation of $\mathfrak{sl}_2$ over an algebraically closed field $K$ of characteristic zero, every non-trivial weight space has a dimension of exactly 1.
# Formalization Structure :
Instead of relying on explicit finite sums (`Finset.sum`) and manipulating coefficients, I heavily leverage Mathlib's abstractions in Submodule Lattice Theory and Coordinate-free Linear Algebra. The formalization proceeds in the following logic:
1. Existence of a Primitive Vector (`exists_primitiveVector`): I construct a primitive (highest-weight) vector by showing that repeated applications of the raising operator $e$ must eventually yield zero due to the finite-dimensionality of $M$ and the linear independence of eigenvectors corresponding to distinct eigenvalues.
2. The span of $f$-Tower as a Lie Submodule equals to the whole space (`fTowerLieSubmodule_eq_top`): I define the $f$-tower submodule as the $K$-span of $\{f^k m \mid k \in \mathbb{N}\}$. By proving its closure under the action of $f, h$, and $e$, I establish it as a Lie submodule. Since $M$ is irreducible, this submodule must be the entire space ($\top$).
3. Submodule Lattice Operations (`exists_mem_fTower_of_weightSpace_ne_bot`): To prove that every weight in $M$ is of the form $\mu_0 - 2k$, I use lattice operations (iSup, inf, and Disjoint) to avoid element-wise tracking. Since the $f$-tower spans $M$, the supremum of its weight spaces is $\top$. By leveraging `Module.End.eigenspaces_iSupIndep`, I show that any arbitrary non-trivial weight space would have a trivial intersection with $\top$ if its weight didn't belong to the sequence, yielding a contradiction.
4. Dimension Calculation via Basis Equivalence (`finrank_weightSpace_eq_one_of_isIrreducible`): Finally, I construct a basis from the non-zero elements of the $f$-tower. To show the weight space is 1-dimensional, I use `Basis.equivFun` to compare coefficients algebraically. This avoids heavy manual indexing and index-shifting, proving that any vector in the weight space $\mu_0 - 2k$ is merely a scalar multiple of $f^k m$.
# Use of AI:
I used Gemini 3.1 Pro for tactics, theorems, improvement suggestions, and error explanations. I fully understand and can vouch for all the modifications I have made to the file.
# Limitations:
I only managed to formalize the finite-dimensional version, although the theorem also holds in the infinite-dimensional case. In the infinite case the existence of a primitive vector is not guaranteed. A quick search suggests that we might need heavy tools like Casimir operators and the universal enveloping algebra, which are totally beyond my current level. I am looking into it, but since there is a significant mathematical gap, I thought it would be best to get this finite-dimensional version merged first. |
new-contributor
t-algebra
large-import
awaiting-author
merge-conflict
label:t-algebra$ |
336/0 |
Mathlib/Algebra/Lie/Sl2.lean |
1 |
11 |
['github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'ocfnash', 'pion2024'] |
ocfnash assignee:ocfnash |
65-15684 2 months ago |
111-82721 111 days ago |
2-57577 2 days |
| 36832 |
KryptosAI author:KryptosAI |
chore(Data/Finset/Card): rename `pred_card_le_card_erase` to `sub_one_card_le_card_erase` |
## Summary
The name `pred_card_le_card_erase` suggests `Nat.pred` but the statement uses `- 1` (i.e., `Nat.sub 1`). Rename to `sub_one_card_le_card_erase` to match the actual statement.
A deprecated alias is added for backwards compatibility.
### Files changed
- `Mathlib/Data/Finset/Card.lean` — definition renamed + deprecated alias
- `Mathlib/Data/Finset/Powerset.lean` — reference updated
- `Mathlib/Combinatorics/Additive/SubsetSum.lean` — reference updated
- `Mathlib/Algebra/Polynomial/EraseLead.lean` — reference updated
Addresses the `Finset.pred_card_le_card_erase` item in #21584.
## AI disclosure
I used Claude Code to explore the codebase (finding all references to rename) and to draft the PR description. I reviewed and understand all changes — these are straightforward renames with a deprecated alias. |
new-contributor
awaiting-author
|
22/15 |
Mathlib/Algebra/Polynomial/EraseLead.lean,Mathlib/Combinatorics/Additive/SubsetSum.lean,Mathlib/Combinatorics/SetFamily/AhlswedeZhang.lean,Mathlib/Combinatorics/SetFamily/Shadow.lean,Mathlib/Data/Finset/Card.lean,Mathlib/Data/Finset/Powerset.lean,Mathlib/Data/Set/Card.lean,Mathlib/GroupTheory/Perm/Support.lean,Mathlib/RingTheory/Ideal/Operations.lean |
9 |
8 |
['KryptosAI', 'Multramate', 'dagurtomas', 'github-actions', 'mattrobball', 'ooovi'] |
nobody |
65-8128 2 months ago |
65-8128 65 days ago |
59-48094 59 days |
| 32555 |
ksenono author:ksenono |
feat(Combinatorics/SimpleGraph/Matching): maximum and maximal matchings for Konig's theorem |
---
<!-- Your PR title will become the first line of the commit message.
definitions and existence of maximum/maximal matchings in simple graphs.
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
awaiting-author
|
112/0 |
Mathlib/Combinatorics/SimpleGraph/DegreeSum.lean,Mathlib/Combinatorics/SimpleGraph/Matching.lean |
2 |
46 |
['SnirBroshi', 'SproutSeeds', 'YaelDillies', 'b-mehta', 'github-actions', 'jcommelin', 'ksenono'] |
YaelDillies assignee:YaelDillies |
64-81750 2 months ago |
65-9509 65 days ago |
130-57925 130 days |
| 37584 |
kennethgoodman author:kennethgoodman |
feat(Data/Nat/Fib): formalize Lamé's theorem |
## Summary
Formalize [Lamé's theorem](https://en.wikipedia.org/wiki/Lam%C3%A9%27s_theorem) (1844), the founding result of computational complexity theory.
**Lamé's Theorem:** If the Euclidean algorithm on inputs `(a, b)` with `b ≤ a` takes `n + 1` division steps, then `b ≥ fib(n + 1)` and `a ≥ fib(n + 2)`.
### New definitions
- `Nat.euclidSteps`: counts the number of division steps in the Euclidean algorithm on natural number inputs.
### New theorems
- `Nat.fib_le_of_euclidSteps`: the main Lamé bound — Fibonacci lower bound on inputs given a step count.
- `Nat.euclidSteps_le_of_lt_fib`: the contrapositive — step count upper bound given a Fibonacci bound on the smaller input.
- `Nat.add_mod_le`: helper lemma that `b + a % b ≤ a` when `b ≤ a` and `0 < b`.
### Proof strategy
Induction on `n`, tracking both elements of the pair. The key insight is that each Euclidean step replaces `(a, b)` with `(b, a % b)`, and since `a ≥ b + a % b` (because `a / b ≥ 1`), the Fibonacci recurrence `fib(n+3) = fib(n+2) + fib(n+1)` matches the structure of the algorithm.
### References
- Gabriel Lamé, *Note sur la limite du nombre des divisions dans la recherche du plus grand commun diviseur entre deux nombres entiers*, Comptes rendus de l'Académie des sciences, 1844.
---
### AI usage disclosure
Per the [Mathlib AI guidelines](https://leanprover-community.github.io/contribute/index.html#use-of-ai): Claude Code (Claude Opus 4.6) was used to assist with writing the Lean 4 proof code, fixing tactic errors, and drafting this PR description. The mathematical proof (induction on step count, tracking both pair elements through the Fibonacci recurrence) was designed by hand and verified on paper before formalization. I have reviewed and understand every line of the resulting Lean code and can explain all proof steps.
---
- [x] builds cleanly (`lake build Mathlib.Data.Nat.Fib.Lame`)
- [x] no `sorry`
- [x] lines ≤ 100 characters, no trailing whitespace
- [x] `autoImplicit false`
- [x] docstrings on all public declarations |
new-contributor
LLM-generated
t-data
merge-conflict
|
121/0 |
Mathlib.lean,Mathlib/Data/Nat/Basic.lean,Mathlib/Data/Nat/Fib/Basic.lean,Mathlib/Data/Nat/Fib/Lame.lean,docs/1000.yaml |
5 |
25 |
['euprunin', 'github-actions', 'kennethgoodman', 'mathlib-merge-conflicts', 'vihdzp', 'wwylele'] |
TwoFX assignee:TwoFX |
64-68622 2 months ago |
64-68623 64 days ago |
44-66371 44 days |
| 36274 |
JTylM author:JTylM |
feat(Combinatorics/SimpleGraph/Matching): implemented the matchingNumber of a graph |
---
- [ ] depends on: #36406
- [ ] depends on: #32555
I implemented the matchingNumber as described in the issue and proved some statements including
showing that there exists a matching achieving the matchingNumber.
matchingNumber is increasing under injective maps
matchingNumber is equal under isomorphisms
matchingNumber of a matching is the cardinality of the matching
This is my first PR and i had some trouble with some of the proofs, especially with the proof for matchingNumber.isAttained. So any suggestions on how to make the proofs shorter would be welcome. Also i was not sure about the naming of some of the theorems so i would apprechiate feedback here as well.
|
new-contributor
t-combinatorics
blocked-by-other-PR
merge-conflict
|
292/2 |
Mathlib/Combinatorics/SimpleGraph/Matching.lean |
1 |
40 |
['JTylM', 'SnirBroshi', 'SproutSeeds', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vlad902'] |
nobody |
64-48472 2 months ago |
125-2139 125 days ago |
9-69432 9 days |
| 39569 |
AlexBrodbelt author:AlexBrodbelt |
feat(Mathlib/Data/Finite/Units): Units are (in)finite if type is (in)finite |
Shows
- [ ] depends on: #39568
- [ ] depends on: #39567
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
blocked-by-other-PR
t-data
new-contributor
|
75/0 |
Mathlib.lean,Mathlib/Data/Finite/Option.lean,Mathlib/Data/Finite/Subtype.lean,Mathlib/Data/Finite/Units.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
64-9632 2 months ago |
64-15517 64 days ago |
0-121 2 minutes |
| 39568 |
AlexBrodbelt author:AlexBrodbelt |
feat(Mathlib/Data/Finite/Subtype): Subtype of elements not equal to a term is finite iff type is finite |
Subtype of terms not equal to a term is finite iff type is finite.
This is an intermediate result to prove that if a `GroupWithZero` is (in)finite then the `Units` are (in)finite.
- [ ] depends on: #39567 [shows option type is finite iff type is finite]
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
blocked-by-other-PR
|
45/0 |
Mathlib.lean,Mathlib/Data/Finite/Option.lean,Mathlib/Data/Finite/Subtype.lean |
3 |
5 |
['AlexBrodbelt', 'github-actions', 'mathlib-dependent-issues', 'themathqueen'] |
nobody |
63-85668 2 months ago |
64-14858 64 days ago |
0-2171 36 minutes |
| 33786 |
hdmkindom author:hdmkindom |
feat(Analysis/Matrix): add Jacobian matrix for matrix-valued functions |
This PR introduces the Jacobian matrix for matrix-valued functions `F : Matrix m n 𝕜 → Matrix p q 𝕜`.
The Jacobian matrix `jacobianMatrix F X` at point `X` is indexed by `(p × q) × (m × n)`, where each entry represents the partial derivative with respect to a basis element. To handle instance-mismatch issues with matrix norms, we use local Frobenius norm instances.
This PR adds the new file:
'Analysis/Matrix/Jacobian.lean'
## Main definitions
- `jacobianMatrix F X`: The Jacobian matrix at point `X`, defined by `jacobianMatrix F X (i, k) (j, l) = (fderiv ℝ F X (Matrix.single j l 1)) i k`
## Main theorems
- `fderiv_eq_jacobian_mul`: Express the Fréchet derivative as a contraction with the Jacobian
- `jacobianMatrix_comp`: Chain rule for Jacobian matrices
- `jacobianMatrix_linear`, `jacobianMatrix_id`, `jacobianMatrix_const`: Basic properties
- `jacobianMatrix_add`, `jacobianMatrix_smul`: Linearity properties
|
t-analysis
new-contributor
awaiting-author
|
174/0 |
Mathlib.lean,Mathlib/Analysis/Matrix/Jacobian.lean |
2 |
21 |
['erdOne', 'github-actions', 'hdmkindom', 'jcommelin'] |
sgouezel assignee:sgouezel |
63-78470 2 months ago |
154-84912 154 days ago |
39-35999 39 days |
| 39673 |
drocta author:drocta |
feat: add instances of MetricSpace, NormedAddGroup, and NormedAddCommGroup for DirectLimit |
add files `Topology/MetricSpace/DirectLimit.lean` (with an instance of `MetricSpace` for a `DirectLimit` of a directed system of `MetricSpace`s with `IsometryClass` map types between them) and `Analysis/Normed/Group/DirectLimit.lean` (with instances of `NormedAddGroup` and `NormedAddCommGroup` on `DirectLimit`)
also lemmas `dist_def` and `norm_def` for these.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This PR is part of a project of adding support for direct limits of $C^*$-algebras (as I described [on Zulip](https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Early.20feedback.20on.20approach.20towards.20formalizing.20UHF.20algebras.3F) ).
This PR uses `IsometryClass` to implement the requirement that the directed systems preserve the `Norm` on the `NormedAddGroup`s, following the advice I got [this Zulip thread](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Representing.20norm-preservation.20for.20directed.20systems.3F/with/595941824) .
Use of AI:
I again used ChatGPT a bit for some advice when writing this (for example, for ideas for simplifying parts of proofs that I suspected could be simpler/shorter, and for advice on which of a couple options would be more idiomatic).
I can personally vouch for all of these contributions, and that I understand this code.
|
t-topology
new-contributor
awaiting-author
|
258/0 |
Mathlib.lean,Mathlib/Analysis/Normed/Group/DirectLimit.lean,Mathlib/Analysis/Normed/Ring/DirectLimit.lean,Mathlib/Topology/MetricSpace/DirectLimit.lean |
4 |
23 |
['drocta', 'eric-wieser', 'github-actions', 'j-loreaux'] |
nobody |
61-32541 2 months ago |
61-46011 61 days ago |
0-14741 4 hours |
| 35069 |
A-M-Berns author:A-M-Berns |
feat(Geometry/Polygon): simple polygons and boundary map |
This PR introduces Simple polygons with the predicate `IsSimple`, which captures the idea of a non-self-intersecting boundary, in the file Simple.lean. In the file Boundary.lean, a boundary map from `AddCircle n` is defined. I prove that the range of this map is the boundary and that this map is injective if and only if the polygon is simple. I kept Boundary.lean and Simple.lean separate because future results will include stuff just about the boundary map independent of simplicity (e.g. that it is continuous in the appropriate setting) and stuff just about simple polygons independent of the boundary map (e.g. that for n = 3, IsSimple iff HasNondegenerateVertices.) I used Claude Code to help generate some of the proof material, but I golfed and edited all AI contribution.
- [x] depends on: #34598
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
--> |
new-contributor
t-euclidean-geometry
LLM-generated
|
360/0 |
Mathlib.lean,Mathlib/Geometry/Polygon/Boundary.lean,Mathlib/Geometry/Polygon/Simple.lean,Mathlib/Logic/Equiv/Fin/Rotate.lean |
4 |
30 |
['A-M-Berns', 'eric-wieser', 'github-actions', 'joneugster', 'jsm28', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp', 'wwylele'] |
nobody |
60-49712 1 month ago |
146-75567 146 days ago |
149-22917 149 days |
| 31796 |
dobronx1325 author:dobronx1325 |
feat(Data/Real/EReal): add mul_lt_mul_of_pos_left theorem |
This PR adds the theorem `EReal.mul_lt_mul_of_pos_left`, which states that for a positive real number `a` and extended reals `b < c`, left multiplication by `a` preserves the strict order: `(a : EReal) * b < (a : EReal) * c`.
The theorem complements existing order-preserving properties for addition in `EReal` and extends the algebraic structure for multiplication. The proof uses basic properties of extended reals and order relations.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
merge-conflict
|
23/0 |
Mathlib/Data/EReal/Operations.lean |
1 |
5 |
['JovanGerb', 'LLaurance', 'dobronx1325', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
60-11204 1 month ago |
239-8432 239 days ago |
6-25774 6 days |
| 35834 |
homeowmorphism author:homeowmorphism |
feat(Mathlib/GroupTheory/PresentedGroup): every group has a presentation |
We show that every group has a presentation defined by taking the free group with all of the group elements as the generators, and defining the relations as the kernel of the induced subjective homomorphism from that free group to the group itself.
Use of AI: This has been vibe-coded with GPT-Codex-5.3, was updated through review, and was double-checked by the author.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-group-theory
large-import
awaiting-author
LLM-generated
merge-conflict
|
29/1 |
Mathlib/GroupTheory/PresentedGroup.lean |
1 |
16 |
['copilot-pull-request-reviewer', 'euprunin', 'github-actions', 'homeowmorphism', 'mathlib-bors', 'mathlib-merge-conflicts', 'plp127', 'tb65536'] |
tb65536 assignee:tb65536 |
59-77687 1 month ago |
138-62220 138 days ago |
4-30999 4 days |
| 39146 |
anovickis author:anovickis |
feat(Analysis/CStarAlgebra/Matrix): CompactSpace instances for unitaryGroup and specialUnitaryGroup |
Adds `CompactSpace` instances (and supporting `IsClosed` / `IsCompact` lemmas) for the matrix unitary and special unitary groups.
The compactness follows from Heine-Borel applied to the entrywise sup norm: every unitary matrix has all entries bounded by `1` (via the existing `entry_norm_bound_of_unitary` lemma), and `Matrix n n 𝕜` is finite-dimensional, so `closed + bounded ⇒ compact`.
### New declarations
- `isClosed_unitaryGroup`, `isCompact_unitaryGroup`
- `instance Matrix.unitaryGroup.instCompactSpace`
- `isClosed_specialUnitaryGroup`, `isCompact_specialUnitaryGroup`
- `instance Matrix.specialUnitaryGroup.instCompactSpace`
All placed inside the existing `EntrywiseSupNorm` section in `Mathlib/Analysis/CStarAlgebra/Matrix.lean`, so the `Matrix.Norms.Elementwise` scope used for the bound is already in scope.
### Motivation
These instances enable downstream constructions of compact matrix Lie groups such as flag manifolds (e.g. SU(3)/T = F₂), where the quotient inherits compactness for free via `Quotient.compactSpace`. They also fill an obvious gap in the matrix-group API: `unitary R` is known to be closed, but compactness for `Matrix.unitaryGroup` was not previously available as an instance.
Claude Code / Anthropic was used for generating the code, Verification was done with lake build, each lemma reviewed. Proofs came out of F2 mass gap lean library - so compile verified |
t-analysis
new-contributor
awaiting-author
|
52/0 |
Mathlib/Analysis/CStarAlgebra/Matrix.lean |
1 |
12 |
['anovickis', 'github-actions', 'j-loreaux', 'wwylele'] |
nobody |
58-72772 1 month ago |
72-64780 72 days ago |
0-7559 2 hours |
| 31898 |
ntapiam author:ntapiam |
feat(LinearAlgebra/TensorAlgebra): implement HopfAlgebra for TensorAlgebra |
implementation of the natural Hopf algebra structure on the TensorAlgebra |
new-contributor
t-ring-theory
awaiting-author
merge-conflict
|
253/0 |
Mathlib.lean,Mathlib/Algebra/FreeAlgebra.lean,Mathlib/LinearAlgebra/TensorAlgebra/Basic.lean,Mathlib/RingTheory/Bialgebra/FreeAlgebra.lean,Mathlib/RingTheory/Bialgebra/TensorAlgebra.lean,Mathlib/RingTheory/HopfAlgebra/TensorAlgebra.lean |
6 |
66 |
['YaelDillies', 'github-actions', 'hawkrobe', 'kckennylau', 'mathlib-merge-conflicts', 'ntapiam'] |
nobody |
57-65230 1 month ago |
241-50990 241 days ago |
0-34649 9 hours |
| 39871 |
daiduo2 author:daiduo2 |
feat(Analysis/ODE): Uniform Gronwall inequality |
## Summary
Adds the integral-form **Uniform Gronwall inequality**, a variant of Gronwall's inequality essential in PDE theory. Unlike the standard Gronwall bound which depends on an initial value, the uniform version provides a bound on `y(t)` that depends only on the **time-averages** of `g`, `h`, and `y` over sliding windows of length `r`.
## Mathematical Statement
Let `y, g, h : ℝ → ℝ` satisfy `y'(t) ≤ g(t) * y(t) + h(t)` on `[0, T)`. If for some `r > 0`:
- `∫_t^{t+r} g(s) ds ≤ a₁`
- `∫_t^{t+r} h(s) ds ≤ a₂`
- `∫_t^{t+r} y(s) ds ≤ a₃`
for all `t ∈ [0, T-r]`, then `y(t) ≤ (a₃/r + a₂) * exp(a₁)` for all `t ∈ [r, T]`.
## Changes
- **New file**: `Mathlib/Analysis/ODE/UniformGronwall.lean` (~590 lines)
- `uniformGronwallBound` — the explicit bound
- `uniformGronwallBound_of_a₂0_a₃0`, `uniformGronwallBound_nonneg` — simp lemmas
- `le_uniformGronwallBound_of_deriv_le` — main theorem
- **Updated**: `Mathlib.lean` — added import
## Design Decisions
- Real-valued functions `ℝ → ℝ` (generalization to normed spaces left for future work)
- Right derivatives (`HasDerivWithinAt` with `Ici`), matching `Gronwall.lean` style
- Assumes non-negativity (`g, h, y ≥ 0`), standard in PDE applications
## References
- R. Temam, *Infinite-Dimensional Dynamical Systems in Mechanics and Physics*, Appendix A |
t-analysis
new-contributor
awaiting-author
LLM-generated
|
601/0 |
Mathlib.lean,Mathlib/Analysis/ODE/UniformGronwall.lean |
2 |
4 |
['daiduo2', 'github-actions', 'grunweg'] |
nobody |
55-65591 1 month ago |
56-76499 56 days ago |
0-13098 3 hours |
| 33817 |
FlAmmmmING author:FlAmmmmING |
fix(Combinatorics/Enumerative/Schroder): fix the definition of `smallSchroder` |
In the previous definition, the small Schröder numbers were defined as
```LaTeX
s_0 = 1, s_1 = 1, s_2 = 1, s_3 = 3...
```
, which does not match the sequence listed in OEIS A006318. Moreover, this definition makes it difficult to correctly write the generating function for the small Schröder numbers. This PR fixes this issue.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
large-import
awaiting-author
merge-conflict
|
61/39 |
Mathlib/Combinatorics/Enumerative/Schroder.lean |
1 |
21 |
['FlAmmmmING', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
YaelDillies assignee:YaelDillies |
53-54217 1 month ago |
118-32223 118 days ago |
74-58112 74 days |
| 35951 |
parabamoghv author:parabamoghv |
feat(CategoryTheory/Monoidal): evaluation coevaluation isomorphisms |
This PR adds four features to rigid categories:
1. `coevaluation_evaluation` and `evaluation_coevaluation` as isomorphism equalities: Using `IsIso` instances for the `evaluation` and `coevaluation` morphisms, we promote the morphism equalities to isomorphism equalities.
2. `ExactPairing Y X` from `ExactPairing X Y`: Using an exact pairing and `IsIso` instances for both `evaluation` and `coevaluation`, we swap the exact pairing by inverting the evaluation and coevaluation morphisms. Any suggestions for the definition name are welcome. Right now it is `ExactPairing.Symm`. The second choice was `ExactPairing.Swap`.
3. `HasLeftDual X` from `HasRightDual X`: Using a `HasRightDual X` instance and relevant `IsIso` instances, we construct a left dual. Similar construction for the other way.
4. `LeftDual` isomorphic to `RightDual`: Using relevant `IsIso` instances, we provide the isomorphism from the left dual of an object to the right dual. This can be achieved in two ways: either by using `leftDualIso` or using `rightDualIso`. We will prove in a subsequent PR that both these isomorphisms are equal.
Motivation: This is part of an effort to formalize CategoricalGroups, which can be defined as right rigid groupoids. The approach is motivated by the discussion in [#34830](https://github.com/leanprover-community/mathlib4/pull/34830).
Any comments or suggestions are welcome, especially about the naming.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
new-contributor
awaiting-author
merge-conflict
|
64/2 |
Mathlib/CategoryTheory/Monoidal/Rigid/Basic.lean |
1 |
19 |
['dagurtomas', 'github-actions', 'joelriou', 'mathlib-merge-conflicts', 'parabamoghv', 'robin-carlier'] |
robin-carlier assignee:robin-carlier |
53-52559 1 month ago |
124-75355 124 days ago |
7-83579 7 days |
| 38595 |
openendings author:openendings |
chore(CategoryTheory): remove defeq abuse in Monad/Kleisli.lean |
Currently most of Kleisli.lean uses defeq abuse to perform deep rewrites equivalent to `Kleisli.of_mk`, `Kleisli.mk_of`, etc.
This PR removes all backward.isDefEq.respectTransparency from the file. Additionally:
- Add `theorem Kleisli.comp`, encoding `Kleisli.category.map_comp` in the base category.
- Add `theorem Cokleisli.comp`, encoding `category.map_comp` in the base category.
- Make `C` implicit in `Monad.unit_naturality` and `Monad.mu_naturality`.
- Make `C` implicit in `Comonad.counit_naturality` and `Comonad.delta_naturality`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- ~~I would greatly appreciate advice ([e.g. via Zulip](https://leanprover.zulipchat.com/#user/1060393)) on tackling the remainder of this file: the defeqs mostly appear in morally `simp`/`calc` proofs that look horrid in `refine` style.
I can supply more rfl theorems like `of_mk` and `mk_of` (and hope to do so in subsequent PRs), but don't know how to use them for a deep type rewrite.~~
[](https://gitpod.io/from-referrer/) |
t-category-theory
new-contributor
awaiting-author
WIP
merge-conflict
|
95/28 |
Mathlib/CategoryTheory/Monad/Basic.lean,Mathlib/CategoryTheory/Monad/Kleisli.lean,MathlibTest/CategoryTheory/Monad.lean |
3 |
23 |
['dagurtomas', 'github-actions', 'joelriou', 'mathlib-merge-conflicts', 'openendings'] |
nobody |
53-48750 1 month ago |
85-41568 85 days ago |
0-4425 1 hour |
| 39164 |
allenhaozhu author:allenhaozhu |
feat(Probability/Distance): add total variation distance `tvDist` |
Add `MeasureTheory.tvDist : Measure α → Measure α → ℝ≥0∞`, the total variation distance between two measures, defined via the truncated subtraction `μ - ν` already in `Mathlib.MeasureTheory.Measure.Sub`. Add four basic lemmas (`tvDist_self`, `tvDist_comm`, `tvDist_nonneg`, `tvDist_le_one`) and a bridge lemma `tvDist_eq_signedMeasure_totalVariation` connecting `tvDist` to the existing `MeasureTheory.SignedMeasure.totalVariation` for finite measures.
---
## AI-assistance disclosure
Per the Mathlib [AI-use policy](https://leanprover-community.github.io/contribute/index.html#use-of-ai):
- **Tool.** Claude Code (Anthropic) with the Claude Sonnet 4.6 model.
- **Use.** I specified the target lemma statements and the proof strategy; the assistant drafted Lean 4 tactic combinations against current Mathlib. I iterated on the proofs, verified each lemma builds under `lake build` from a clean checkout, and read the final code.
- **Vouching.** I have read every declaration in this file and can defend the proofs without further AI assistance. I welcome reviewer feedback on naming, namespace placement, and stylistic alignment with the surrounding Mathlib modules. |
t-measure-probability
new-contributor
LLM-generated
awaiting-author
merge-conflict
|
187/0 |
Mathlib.lean,Mathlib/Probability/Distance/TotalVariation.lean |
2 |
5 |
['allenhaozhu', 'github-actions', 'grunweg', 'mathlib-merge-conflicts'] |
nobody |
53-48487 1 month ago |
72-19226 72 days ago |
0-2707 45 minutes |
| 34875 |
banrovegrie author:banrovegrie |
feat(LinearAlgebra/Matrix): add Sherman-Morrison formula |
Mathlib has the matrix determinant lemma (`det_add_replicateCol_mul_replicateRow` in SchurComplement.lean) but lacked the corresponding inverse formula. This PR fills that gap.
- Add `Matrix.inv_add_vecMulVec`: Sherman-Morrison formula for `(A + uv^T)^{-1}`
- Add `Matrix.inv_sub_vecMulVec`: subtraction variant
- Add `Matrix.isUnit_det_add_vecMulVec`: invertibility under the formula's hypotheses
## Test plan
- [x] `lake build` passes
- [x] Lines within 100 char limit
- [x] All declarations have docstrings
**Any specific AI usage?**: Used Copilot for review purposes. |
t-algebra
new-contributor
awaiting-author
label:t-algebra$ |
135/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Matrix/ShermanMorrison.lean |
2 |
15 |
['Xxxjdjdid', 'banrovegrie', 'chrisflav', 'copilot-pull-request-reviewer', 'eric-wieser', 'github-actions', 'wwylele'] |
chrisflav assignee:chrisflav |
51-76606 1 month ago |
97-77683 97 days ago |
69-6728 69 days |
| 38887 |
Rosario-Leonardi-CT author:Rosario-Leonardi-CT |
feat(Analysis/Fourier/ZMod): add dft_star_comp |
Adds `ZMod.dft_star_comp`, expressing that `𝓕 (star ∘ Φ) k = star (𝓕 Φ (-k))`, the discrete analogue of the Fourier transform's interaction with complex conjugation, complementing the existing `dft_comp_neg`.
---
AI disclosure: lemma statement and proof drafted with assistance from Claude Code; verified by the Lean compiler with no `sorry` and standard axioms only (`propext`, `Classical.choice`, `Quot.sound`). |
t-analysis
new-contributor
awaiting-author
|
9/0 |
Mathlib/Analysis/Fourier/ZMod.lean |
1 |
9 |
['Rosario-Leonardi-CT', 'github-actions', 'wwylele'] |
j-loreaux assignee:j-loreaux |
51-75869 1 month ago |
74-74805 74 days ago |
5-6447 5 days |
| 35672 |
dennj author:dennj |
feat(RingTheory/Polynomial/Cyclotomic): vanishing sums and fiber equidistribution at primitive roots |
## Summary
Building on `sum_eq_zero_iff_forall_eq` from #34592, this PR adds:
- cyclotomic_dvd_of_aeval_eq_zero, exists_int_smul_cyclotomic_of_natDegree_le_totient — integer polynomials vanishing at a primitive n-th root are divisible by cyclotomic n ℤ, and (for degree ≤ φ(n)) integer multiples of it.
- sum_eq_zero_iff_forall_eq and its ℤ / ZMod p variants — vanishing iff all coefficients equal.
- sum_fiber_eq_sum_fiber_of_sum_weighted_pow_eq_zero, card_fiber_eq_card_div_of_sum_pow_eq_zero — fiber equidistribution.
- cyclotomic_prime_coeff — the formula (cyclotomic p R).coeff i = if i < p then 1 else 0, generalising existing coeff_zero/coeff_one lemmas.
-
References: [deLauneyFlannery2011, Lemma 2.8.5] (underlying ℚ/ℕ fact) and [armario2024, Lemma 7 and Theorem 3] (ℤ statement and the fiber-counting application).
Theorems imported from: https://github.com/Latinum-Agentic-Commerce/AlgebraicDesignTheory
Human made PR with LLM used for documentation and proof golfing |
t-ring-theory
new-contributor
LLM-generated
awaiting-author
|
128/2 |
Mathlib/RingTheory/Polynomial/Cyclotomic/Basic.lean,Mathlib/RingTheory/Polynomial/Cyclotomic/Roots.lean,docs/references.bib |
3 |
7 |
['dennj', 'github-actions', 'grunweg', 'ocfnash', 'riccardobrasca'] |
riccardobrasca assignee:riccardobrasca |
49-15507 1 month ago |
49-15507 49 days ago |
46-65914 46 days |
| 35753 |
Vilin97 author:Vilin97 |
feat(Topology/Algebra/Order): regular grid helpers and piecewise linear interpolation |
Make API for piecewise linear interpolation on regular grids. I need these to for ODE time-stepping methods, like forward Euler, and later Runge–Kutta methods.
Follow-up PR: #35755 (forward Euler method convergence).
I don't know if these numerical analysis ODE-solving methods even belong in mathlib. If someone could advise me on it, I would appreciate it.
---
The initial proof was produced by [Aristotle](https://aristotle.harmonic.fun). The code was iteratively refined (factoring out lemmas, golfing, simplifying proofs) using Claude Code.
- [ ] depends on: #38091 |
t-topology
new-contributor
LLM-generated
maintainer-merge
|
201/0 |
Mathlib.lean,Mathlib/Topology/Algebra/Order/PiecewiseLinear.lean |
2 |
59 |
['Vilin97', 'YanYablonovskiy', 'adomani', 'botbaki-review', 'copilot-pull-request-reviewer', 'dagurtomas', 'eric-wieser', 'github-actions', 'grunweg', 'j-loreaux', 'mathlib-dependent-issues', 'wwylele'] |
nobody |
48-49712 1 month ago |
81-60432 81 days ago |
114-22576 114 days |
| 39986 |
CRudrum author:CRudrum |
feat: add HasKernels instance for Pointed |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-category-theory
large-import
awaiting-author
|
28/2 |
Mathlib/CategoryTheory/Category/Pointed.lean |
1 |
11 |
['CRudrum', 'Whysoserioushah', 'dagurtomas', 'github-actions'] |
nobody |
47-79336 1 month ago |
54-65417 54 days ago |
0-5451 1 hour |
| 40225 |
localparty author:localparty |
feat(RingTheory/LaurentSeries): leibniz product rule for derivative |
This PR adds the Leibniz product rule (`(f * g)' = f' * g + f * g'`) for the
first formal derivative on `LaurentSeries R` (R a commutative ring).
The first derivative is already packaged in
`Mathlib/RingTheory/LaurentSeries.lean` as
```lean
def derivative (R : Type*) {V : Type*} [AddCommGroup V] [Semiring R] [Module R V] :
LaurentSeries V →ₗ[R] LaurentSeries V :=
hasseDeriv R 1
```
with a `derivative_*` family of theorems (`derivative_apply`,
`derivative_iterate`, `derivative_iterate_coeff`). The Leibniz product rule
was missing. This PR fills that gap, adding `derivative_mul` alongside the
existing `derivative_*` family.
The proof is direct on coefficients via `HahnSeries.coeff_mul` and an
`addAntidiagonal` shift-bijection (matching the style of the existing
`hasseDeriv_*` lemmas). Five private helper lemmas factor the
coefficient-side calculation:
- `derivative_coeff` — clean coefficient formula at k = 1
- `support_derivative_subset` — `(derivative R f).support ⊆ (· - 1) '' f.support`
- `isPWO_shifted_support` — PWO preserved by the shift-by-(-1)
- `sum_bij_left` / `sum_bij_right` — `Finset.sum_nbij'` shift-reindexings
Total addition: ~85 LOC (5 private helpers + the public `derivative_mul`).
## Related future work
Full `Derivation` packaging for `LaurentSeries.hasseDeriv` (matching
`PowerSeries.derivative`-as-`Derivation` at
`Mathlib/RingTheory/PowerSeries/Derivative.lean:102`) is a natural follow-up,
since this Leibniz rule would discharge the `leibniz'` field. Out of scope
for this PR; can be a separate follow-up "LaurentSeries algebra-of-derivations
API" PR.
## Provenance
This lemma surfaced during work on a Lean 4 formalization of equisingular
flat connections (Connes–Marcolli 2008, Ch IV §6.4), where `LaurentSeries ℂ`
serves as the base ring for the ℂ((t))-module connection-matrix substrate.
The Leibniz rule is needed for the category-of-connection-preserving-maps
intertwining condition.
|
t-ring-theory
new-contributor
awaiting-author
LLM-generated
|
104/0 |
Mathlib/RingTheory/LaurentSeries.lean |
1 |
5 |
['github-actions', 'grunweg', 'localparty'] |
nobody |
47-70943 1 month ago |
47-78141 47 days ago |
0-8124 2 hours |
| 38348 |
mirajcs author:mirajcs |
feat(Geometry/Curve): add Frenet–Serret framework |
---
This PR introduces a basic formalization of smooth parametrized curves in `ℝ³`
(`EuclideanSpace ℝ (Fin 3)`) together with the Frenet frame and partial proofs
of the Frenet–Serret formulas.
Main contributions:
* Define `ParametrizedDifferentiableCurve` as a smooth map on an open interval.
* Define arc length and arc-length parametrization.
* Define geometric quantities:
- curvature `κ(t) = ‖α''(t)‖`
- tangent, normal, and binormal vector fields
- torsion via `‖B'(t)‖`
* Introduce the `FrenetFrame` structure.
* Prove key Frenet–Serret formulas:
- `T' = κ • N`
- `B' = -τ • N`
- `N' = -κ • T + τ • B`
The implementation relies on existing analysis and inner product space
infrastructure, as well as properties of the cross product in `ℝ³`.
Some intermediate lemmas about orthogonality and cross-product identities
are included.
At present, some results assume nonvanishing curvature/torsion and include
auxiliary hypotheses about derivatives. These can be streamlined in future work.
This development is intended as a foundation for further formalization of
classical differential geometry (curves and surfaces).
---
|
new-contributor
t-differential-geometry
awaiting-author
|
525/0 |
Mathlib.lean,Mathlib/Geometry/Curves/Basic.lean,Mathlib/Geometry/Curves/FrenetFrame.lean |
3 |
19 |
['bryangingechen', 'github-actions', 'mathlib-merge-conflicts', 'mirajcs', 'ocfnash', 'vihdzp', 'wwylele'] |
nobody |
47-45081 1 month ago |
84-79188 84 days ago |
6-55291 6 days |
| 39939 |
8e7 author:8e7 |
feat(Combinatorics/SimpleGraph/TreeDecomp): clique lemma for tree decompositions |
This PR proves the treewidth of a complete graph is `#V - 1` for finite V, and consequently, `G.cliqueNum - 1 <= G.treeWidth`. This PR follows #38334, and is a direct application of #39864.
AI Usage: The proofs were developed with the help of Claude Code. I vouch for all the code written and understand the content fully.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #38334
- [ ] depends on: #39864
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
blocked-by-other-PR
|
588/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/TreeDecomp.lean |
4 |
5 |
['8e7', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
47-43212 1 month ago |
55-77198 55 days ago |
0-3952 1 hour |
| 39282 |
Sfgangloff author:Sfgangloff |
feat(SymbolicDynamics): add union morphism lemma for LanguageOn |
In symbolic dynamics.
This PR proves that taking the language over a finite shape commutes with unions of configuration sets:
$LanguageOn (X \cup Y) U = LanguageOn X U \cup LanguageOn Y U$
The proof is a direct unfolding of definitions: a pattern in the language of $X \cup Y$ comes from restricting a configuration $x ∈ X \cup Y$, and splitting on whether $x \in X$ or $x \in Y$ yields the corresponding inclusion in either $LanguageOn X U$ or $LanguageOn Y U$. The converse direction rebuilds a witness in $X \cup Y$ from either side of the union.
Related to issue #39252 |
t-dynamics
new-contributor
awaiting-author
|
9/1 |
Mathlib/Dynamics/SymbolicDynamics/Basic.lean |
1 |
5 |
['Sfgangloff', 'github-actions', 'sgouezel'] |
sgouezel assignee:sgouezel |
47-18179 1 month ago |
47-18179 47 days ago |
23-7818 23 days |
| 32960 |
dleijnse author:dleijnse |
feat(FieldTheory): adjoin pth roots |
For a field `k` of exponential characteristic `p` and a subset `S` of `k`, we define the extension of `k` obtained by adjoining all `p`-th roots of elements of `S`. We prove that this is a purely inseparable extension, and provide some basic API.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
awaiting-author
merge-conflict
label:t-algebra$ |
131/0 |
Mathlib.lean,Mathlib/FieldTheory/PurelyInseparable/AdjoinPthRoots.lean |
2 |
14 |
['artie2000', 'chrisflav', 'dleijnse', 'erdOne', 'github-actions', 'leanprover-radar', 'mathlib-merge-conflicts'] |
erdOne assignee:erdOne |
46-63548 1 month ago |
206-76598 206 days ago |
10-12739 10 days |
| 37281 |
AltSoKoly author:AltSoKoly |
Update EdgeConnectivity.lean |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
awaiting-author
merge-conflict
|
123/0 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/EdgeConnectivity.lean,Mathlib/Data/Int/GCD.lean |
2 |
6 |
['github-actions', 'grunweg', 'mathlib-merge-conflicts', 'themathqueen'] |
nobody |
46-61080 1 month ago |
116-77591 116 days ago |
0-432 7 minutes |
| 40329 |
no-j author:no-j |
feat(Computability): matching εNFA.Path definition with NFA.Path |
Added εNFA.Path definition that is based on `Type` instead of `Prop` to match NFA's path definition
Added εNFA.Path.supp (same definition as NFA.Path.supp)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-computability
new-contributor
|
60/23 |
Mathlib/Computability/EpsilonNFA.lean |
1 |
3 |
['github-actions'] |
nobody |
45-15697 1 month ago |
45-16530 45 days ago |
45-16366 45 days |
| 38344 |
robo7179 author:robo7179 |
feat(SimpleGraph/Coloring/VertexColoring): Matching is 2 colorable |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
merge-conflict
|
51/0 |
Mathlib/Combinatorics/SimpleGraph/Coloring/VertexColoring.lean |
1 |
6 |
['SnirBroshi', 'github-actions', 'mathlib-merge-conflicts', 'vlad902'] |
b-mehta assignee:b-mehta |
44-82456 1 month ago |
44-82457 44 days ago |
46-71620 46 days |
| 33355 |
0xTerencePrime author:0xTerencePrime |
feat(Combinatorics/SimpleGraph/Connectivity): define vertex connectivity |
**AI Disclosure**: Developed with LLM assistance (Claude). All mathematical design decisions were made by the author.
---
This PR introduces the foundations of vertex connectivity for simple graphs, providing a counterpart to the edge connectivity theory in #32870.
### Main definitions
- `SimpleGraph.IsVertexReachable`: two vertices are `k`-vertex-reachable if they remain reachable after removing any set of strictly fewer than `k` vertices, using `G.induce sᶜ`.
- `SimpleGraph.IsVertexPreconnected`: a graph is `k`-vertex-preconnected if any two vertices are `k`-vertex-reachable.
- `SimpleGraph.IsVertexConnected`: a graph is `k`-vertex-connected if it is `k`-vertex-preconnected and has more than `k` vertices (`k + 1 ≤ ENat.card V`).
### Key lemmas
- `k = 0`: 0-connected ↔ nonempty; 0-preconnected always holds
- `k = 1`: 1-connected ↔ `Nontrivial V ∧ G.Preconnected`
- `anti` / `mono`: antitonic in `k`, monotonic in the graph |
new-contributor
t-combinatorics
LLM-generated
awaiting-author
merge-conflict
|
169/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/VertexConnectivity.lean |
2 |
166 |
['0xTerencePrime', 'SnirBroshi', 'SproutSeeds', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
b-mehta assignee:b-mehta |
44-62853 1 month ago |
50-59317 50 days ago |
65-5110 65 days |
| 36210 |
vbeffara author:vbeffara |
feat(Combinatorics/SimpleGraph): definitions of graph contraction and graph minor |
A contraction is the image of a graph through a surjective function with connected fibers, and a minor is a contraction of a subgraph.
This PR shows that being a contraction is transitive, but does not show the same for minors because the proof is more involved, it will be in a subsequent PR. The definitions are in `Prop` and do not contain data, but I'm not sure if that was the right choice.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
awaiting-author
merge-conflict
|
151/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Contraction.lean,Mathlib/Combinatorics/SimpleGraph/Minor.lean |
3 |
9 |
['YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'robin-carlier', 'vbeffara'] |
b-mehta assignee:b-mehta |
44-61225 1 month ago |
84-83239 84 days ago |
53-32590 53 days |
| 39697 |
sorrachai author:sorrachai |
feat(Data/Tree/Basic): add Membership instance, new notation, rename Tree |
Summary:
1. [Rename]([#CSLib > Splay tree PR: BinaryTree vs Tree @ 💬](https://leanprover.zulipchat.com/#narrow/channel/513188-CSLib/topic/Splay.20tree.20PR.3A.20BinaryTree.20vs.20Tree/near/596482765)) from Tree to BinaryTree, which propagates the changes to other files that use it.
2. Add membership instance, prove decidability of membership.
3. Add toListInOrder, toListPreOrder, toListPostOrder
Suggestion based on the discussion in the cslib [thread](https://leanprover.zulipchat.com/#narrow/channel/513188-CSLib/topic/Splay.20tree.20PR/near/596568391)[#CSLib > Splay tree PR @ 💬](https://leanprover.zulipchat.com/#narrow/channel/513188-CSLib/topic/Splay.20tree.20PR/near/596568391).
---
* depends on: #39707 |
new-contributor
awaiting-author
|
117/8 |
Mathlib/Data/Tree/Basic.lean |
1 |
8 |
['eric-wieser', 'github-actions', 'sorrachai'] |
nobody |
43-62332 1 month ago |
43-68662 43 days ago |
17-22788 17 days |
| 37071 |
ericluap author:ericluap |
feat: Dedekind completion of rationals is isomorphic to EReal |
|
t-order
new-contributor
awaiting-author
merge-conflict
|
128/4 |
Mathlib.lean,Mathlib/Data/EReal/Basic.lean,Mathlib/Data/EReal/DedekindCut.lean,Mathlib/Order/Completion.lean |
4 |
60 |
['ericluap', 'github-actions', 'mathlib-merge-conflicts', 'plp127', 'vihdzp', 'wwylele'] |
YaelDillies, bryangingechen, vihdzp assignee:bryangingechen assignee:YaelDillies assignee:vihdzp |
43-56009 1 month ago |
48-24327 48 days ago |
46-52403 46 days |
| 38546 |
yhx-12243 author:yhx-12243 |
fix(Algebra/Module/Injective): changing the universe from the module's to the ring's |
Change the definition of
```lean
class Module.Injective : Prop where
out : ∀ ⦃X Y : Type v⦄ [AddCommGroup X] [AddCommGroup Y] [Module R X] [Module R Y]
(f : X →ₗ[R] Y) (_ : Function.Injective f) (g : X →ₗ[R] Q),
∃ h : Y →ₗ[R] Q, ∀ x, h (f x) = g x
```
into
```lean
class Module.Injective : Prop where
out : ∀ ⦃X Y : Type u⦄ [AddCommGroup X] [AddCommGroup Y] [Module R X] [Module R Y]
(f : X →ₗ[R] Y) (_ : Function.Injective f) (g : X →ₗ[R] Q),
∃ h : Y →ₗ[R] Q, ∀ x, h (f x) = g x
```
where `u` is the universe of ring, `v` is the universe of module,
to make it agree with `Module.Baer` and real mathematical definition, **without universe issues** (make the theorem [`Module.Baer.of_injective`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Module/Injective.html#Module.Baer.of_injective) not require `Small.{v, u} R` issue).
This type of adaption also appeared in the criterion `Module.Flat`, which also uses `Type u` on testing modules.
See discussions in https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Universe.20issue.20about.20injective.20module .
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
awaiting-zulip
awaiting-author
label:t-algebra$ |
57/43 |
Mathlib/Algebra/Category/ModuleCat/Injective.lean,Mathlib/Algebra/Category/ModuleCat/Ulift.lean,Mathlib/Algebra/Module/Injective.lean,Mathlib/RepresentationTheory/FinGroupCharZero.lean,Mathlib/RingTheory/Flat/Tensor.lean,Mathlib/RingTheory/LocalProperties/Injective.lean |
6 |
10 |
['eric-wieser', 'github-actions', 'grunweg', 'mathlib-bors', 'wwylele', 'yhx-12243'] |
nobody |
43-22526 1 month ago |
86-64193 86 days ago |
0-26133 7 hours |
| 40416 |
sparckix author:sparckix |
feat(Order/Monotone): add diagonal subsequence extraction |
This PR adds a small diagonal extraction lemma for nested strictly monotone subsequences of `Nat`.
Given strict-mono maps `φ k : Nat -> Nat` such that each `φ (k + 1)` factors through `φ k` by a strict-mono map `τ k`, the diagonal sequence `fun n => φ n n` is strictly monotone and each tail of the diagonal factors through the corresponding `φ k` by a strict-mono map.
The lemma is intended as a reusable sequence/order fact and is placed near `Nat.exists_strictMono_subsequence`.
Local checks run:
```text
lake env lean Mathlib/Order/Monotone/Basic.lean
lake build Mathlib.Order.Monotone.Basic
lake exe lint-style Mathlib/Order/Monotone/Basic.lean
git diff --check
```
AI assistance disclosure: I used AI tools, including Codex and external model feedback, to help extract and review this small lemma from a local formalization project. I have checked the statement and proof myself and am responsible for the submitted code.
|
t-order
new-contributor
LLM-generated
|
66/0 |
Mathlib/Order/Monotone/Basic.lean |
1 |
2 |
['github-actions'] |
nobody |
42-62863 1 month ago |
42-81645 42 days ago |
42-81109 42 days |
| 40472 |
karlesmarin author:karlesmarin |
feat(Combinatorics/SimpleGraph): oriented incidence matrix and the La… |
# feat(Combinatorics/SimpleGraph): oriented incidence matrix and the Laplacian factorization
## Summary
Adds the **oriented incidence matrix** of a simple graph and the standard **Gram factorization
of the graph Laplacian**:
- **`SimpleGraph.orientedIncMatrix R : Matrix α (Sym2 α) R`** — in the column of an edge
`e = s(u, w)` with `u < w`: `+1` at row `w` (the larger endpoint), `-1` at row `u`, `0`
elsewhere; columns of non-edges are zero. Orientation induced by a `LinearOrder` on the
vertex type.
- **`SimpleGraph.orientedIncMatrix_mul_transpose`** — `N * Nᵀ = G.lapMatrix R` (= `D − A`).
- Supporting API mirroring `incMatrix`: `orientedIncMatrix_apply`,
`orientedIncMatrix_of_notMem_incidenceSet`, `orientedIncMatrix_mul_self`
(the square of an entry is the unoriented `incMatrix` entry), and the two sign lemmas
`orientedIncMatrix_apply_mul_apply_of_adj` (product of the two endpoint entries = `-1`),
`orientedIncMatrix_apply_add_apply_of_adj` (their sum = `0`), plus
`orientedIncMatrix_apply_mul_apply_of_ne` (vanishing away from the common edge).
## Why
Mathlib has the unoriented `G.incMatrix`, whose Gram matrix is the **signless** Laplacian
`D + A` (`incMatrix_mul_transpose_diag` ff.), and it has `G.lapMatrix = D − A` with its kernel
theory — but no object connecting the two. The oriented incidence matrix is that object, and
`N Nᵀ = D − A` is the factorization behind: positive semidefiniteness of the Laplacian as a
Gram fact, Kirchhoff/matrix-tree determinant arguments (via Cauchy–Binet on the reduced
factorization), and total unimodularity of incidence matrices.
## Design notes
- The fixed smaller→larger orientation is harmless: any orientation gives the same Gram matrix
(each edge contributes `(±1)²` on the diagonal and `(+1)(−1)` off it). This is stated in the
module docstring; no orientation-genericity machinery is introduced.
- The headline proof is entrywise: the diagonal reduces to `sum_incMatrix_apply` (= degree)
through `orientedIncMatrix_mul_self`; an off-diagonal `(u, w)` entry is supported on the
single column `s(u, w)`, handled by `Finset.sum_eq_single` and the sign lemmas.
- `[Ring R]` for the API section (signs need negation); the definition itself only needs
`[Zero R] [One R] [Neg R]`.
## Files / placement
- `Mathlib/Combinatorics/SimpleGraph/OrientedIncMatrix.lean` (new)
- `Mathlib.lean` (+1 import line)
## Verification
- `lake env lean` on the file: clean, zero warnings.
- `#print axioms SimpleGraph.orientedIncMatrix_mul_transpose` → 3 standard axioms.
- The factorization and the downstream matrix-tree chain were validated numerically in exact
arithmetic (SageMath) before formalization.
Downstream context: DOI [10.5281/zenodo.20629746](https://doi.org/10.5281/zenodo.20629746).
|
new-contributor
LLM-generated
|
157/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/OrientedIncMatrix.lean |
2 |
1 |
['github-actions'] |
nobody |
41-75052 1 month ago |
41-80129 41 days ago |
41-79686 41 days |
| 39192 |
jayscambler author:jayscambler |
feat(InnerProductSpace/PiL2): det of a linear isometry has unit norm |
Adds `LinearIsometryEquiv.norm_det` and the real corollary `LinearIsometryEquiv.abs_det`. The proof uses the unitary matrix of a linear isometry in orthonormal bases, via `LinearIsometryEquiv.toMatrix_mem_unitaryGroup` and `Matrix.det_of_mem_unitary`. The supporting matrix lemma is moved from `Adjoint.lean` to `PiL2.lean`, where it no longer depends on adjoints. |
t-analysis
new-contributor
LLM-generated
awaiting-author
|
22/0 |
Mathlib/Analysis/InnerProductSpace/PiL2.lean |
1 |
8 |
['github-actions', 'grunweg', 'jayscambler', 'sgouezel', 'themathqueen', 'wwylele'] |
sgouezel assignee:sgouezel |
41-12744 1 month ago |
62-1043 62 days ago |
10-9654 10 days |
| 37707 |
MavenRain author:MavenRain |
feat(Combinatorics/SimpleGraph): add IsMaximalClique/IsMaximalIndepSet, refactor IsMaximum* to MaximalFor |
Addresses #34962
|
new-contributor
t-combinatorics
merge-conflict
|
63/31 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean |
1 |
7 |
['MavenRain', 'SnirBroshi', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
40-63383 1 month ago |
40-63384 40 days ago |
26-52833 26 days |
| 40520 |
Julian-Kuelshammer author:Julian-Kuelshammer |
feat(CategoryTheory/Linear): linear Yoneda and coYoneda are linear |
Mathlib/CategoryTheory/Linear/Basic.lean:
Adds an instance that the opposite category of a linear category is linear.
Mathlib/CategoryTheory/Linear/Yoneda.lean:
Adds instances that the linearYoneda and linearcoYoneda are linear functors, which was a TODO before.
---
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
|
27/2 |
Mathlib/CategoryTheory/Linear/Basic.lean,Mathlib/CategoryTheory/Linear/Yoneda.lean |
2 |
3 |
['github-actions'] |
nobody |
40-59025 1 month ago |
40-60461 40 days ago |
40-60458 40 days |
| 34138 |
pfaffelh author:pfaffelh |
feat(MeasureTheory): Introduce `DiscreteMeasure α` giving rise to a `Measure α` as a sum of `dirac`s |
Define `DiscreteMeasure α` as a structure with `weight : α → ℝ≥0∞`
Define `toMeasure (w : DiscreteMeasure α) : Measure α` as a sum of diracs
Show properties of the resulting objects
This PR intends to start a more userfriendly interaction with discrete probability (measure) theory, in contrast to probability mass functions (`PMF`). There are two main differences between `DiscreteMeasure` and `PMF`:
* Every `PMF` hast the additional property `HasSum 1`, making the resulting measure a probability measure. (For `DiscreteMeasure`, I intend to use the typeclass `IsProbabilityMeasure`in a later PR instead.)
* The `toMeasure` function of `MassFunction` defines the measure as a sum of diracs, which immediately makes computations possible.
Discussion thread on [zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/PMF.20Refactor.3A.20FunLike.20vs.20Definition.20Change)
- depends on: #37060
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
new-contributor
|
216/0 |
Mathlib.lean,Mathlib/Algebra/GroupWithZero/Indicator.lean,Mathlib/Data/Set/Pairwise/Basic.lean,Mathlib/MeasureTheory/Measure/DiscreteMeasure.lean |
4 |
27 |
['DavidLedvinka', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'metakunt', 'ocfnash', 'pfaffelh'] |
ocfnash assignee:ocfnash |
40-26526 1 month ago |
40-24062 40 days ago |
82-21885 82 days |
| 40543 |
SnkXyx author:SnkXyx |
feat(Algebra/MvPolynomial/CharacteristicSet): add triangular set |
This PR defines the structure of a **Triangular Set** of multivariate polynomials. A Triangular Set is a finite ordered sequence of non-zero polynomials `[P₁, P₂, ..., Pₘ]` such that their main (max) variables are strictly increasing:
`mainVar(P₁) < mainVar(P₂) < ... < mainVar(Pₘ)`.
The definition was originally developed in PR #36103 as part of the formalization of the Characteristic Set Method (Wu-Ritt Method). The Characteristic Set project aims to formalize the algorithmic method for solving systems of multivariate polynomial equations in Lean 4, providing foundational infrastructure for algebraic geometry based on triangular decomposition.
Triangular sets provide a structured representation of polynomial systems that facilitates variable elimination. Since the main variables are strictly increasing, variables can be eliminated successively, starting from the last polynomial and proceeding backwards through the sequence. This makes triangular sets a fundamental object in Wu-Ritt Method.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
new-contributor
label:t-algebra$ |
589/0 |
Mathlib.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/TriangularSet.lean |
2 |
3 |
['SnkXyx', 'github-actions'] |
nobody |
40-6471 1 month ago |
40-7305 40 days ago |
0-16 16 seconds |
| 38364 |
openendings author:openendings |
feat(Order): directed complete partial orders |
Define DirectedCompletePartialOrder and its interaction with iSup and sSup.
A directed complete partial order is equivalently:
- a partial order with LUBs of nonempty directed sets;
- what happens when you remove ⊥ from a CompletePartialOrder; or
- a ConditionallyCompletePartialOrder in which every directed set is BddAbove.
Like CPOs, DCPOs are commonly studied in denotational semantics.
---
Potential applications:
- [#Is there code for X? > Summing `ENat`s without topology](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Summing.20.60ENat.60s.20without.20topology/with/590070848) -- defining infinite sums in an DCPO-enriched `AddCommMonoidWithTop` such as `ENat` or `ENNReal`.
- [#Is there code for X? > Scott Induction](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Scott.20Induction/with/590112858) -- fixpoint theorems similar to `OmegaCompletePartialOrder`, generalised to arbitrary cardinalities.
[](https://gitpod.io/from-referrer/)
|
t-order
new-contributor
awaiting-author
|
123/0 |
Mathlib.lean,Mathlib/Order/DirectedCompletePartialOrder/Defs.lean,docs/references.bib |
3 |
5 |
['SnirBroshi', 'YaelDillies', 'github-actions', 'openendings'] |
YaelDillies assignee:YaelDillies |
39-31139 1 month ago |
39-31139 39 days ago |
51-77810 51 days |
| 36731 |
michael-novak-math author:michael-novak-math |
feat: Frénet moving frame and Frénet equation for plane curves |
We define the curvature function, normal vector function and the Frénet moving frame for plane curve.
We also prove the Frénet equations for plane curves.
A separate PR (#37489) will prove the fundamental theorem of plane curves. |
new-contributor
t-differential-geometry
t-analysis
awaiting-author
|
327/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/Calculus.lean,Mathlib/Geometry/PlaneCurves.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/FundThmCalculus.lean,docs/references.bib |
5 |
117 |
['Ruben-VandeVelde', 'eric-wieser', 'github-actions', 'grunweg', 'michael-novak-math', 'scholzhannah'] |
nobody |
39-16021 1 month ago |
108-74590 108 days ago |
12-40134 12 days |
| 36326 |
Arnav-panjla author:Arnav-panjla |
Feat/gaussian schwartz map |
feat(Analysis/SpecialFunctions/Gaussian): define the Gaussian as a Schwartz function in 1D
Define the Gaussian function `x ↦ exp (-x^2)` as a `SchwartzMap` in the one-dimensional case.
The proof establishes the Schwartz decay conditions by showing that polynomially
weighted expressions of the form `(1 + x^2)^m * exp (-x^2)` are bounded. This
allows the Gaussian to be packaged using the `SchwartzMap` API.
During the implementation a few adjustments were required to match the current
Mathlib API. In particular:
* replace the non-existent `IsBigO.mul_right` with `IsBigO.of_bound` applied to the
full product `(1 + x^2)^m * exp (-x^2)`
* fix `mem_cocompact` usage by replacing `(hh_tendsto.eventually ...).mem_cocompact`
with `mem_cocompact.mp (hh_tendsto ...)`
* adjust the `hb_bound` step using `gcongr` with exact bounds so that both goals close
* remove the unused declaration `hf_nonpos`
* register the required import in `Mathlib.lean`
This implements the one-dimensional case mentioned in the issue. The generalization
to Gaussians associated with arbitrary positive-definite bilinear forms can be
added in a follow-up PR.
Closes #33072 |
t-analysis
new-contributor
|
235/0 |
Mathlib.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/SchwartzMap.lean |
2 |
5 |
['CoolRmal', 'LLaurance', 'github-actions'] |
nobody |
38-65700 1 month ago |
136-75956 136 days ago |
0-96 1 minute |
| 39791 |
zixiaowang17 author:zixiaowang17 |
feat(Probability/HypothesisTesting): add Neyman-Pearson lemma |
This PR adds `Probability/HypothesisTesting/NeymanPearson.lean`, formalizing the classical Neyman-Pearson lemma with reference
Ingster, Y. and Suslina, I.A., 2012. Nonparametric goodness-of-fit testing under Gaussian models (Vol. 169). Springer Science & Business Media.
-/
The main definitions are:
* `ProbabilityTheory.NeymanPearson.npLikelihoodRatio`
* `ProbabilityTheory.NeymanPearson.npTest`
* `ProbabilityTheory.NeymanPearson.npSumError`
The main theorem is:
* `ProbabilityTheory.NeymanPearson.neyman_pearson`
We state the theorem in the weighted form `∫ T dP + t * ∫ (1 - T) dQ`, over measurable tests T : Ω → ℝ with values in [0, 1], using P + Q as the canonical dominating measure; rather than starting with the constrained formulation that fixes the Type I error and minimizes the Type II error. The reasons are two fold.
First, it can be thought as the Lagrangian form of the classical constrained Neyman-Pearson problem.
Second, this weighted form is often arises in applications, such as, in minimax lower-bound arguments for functional estimation, where one typically reduces estimation lower bounds to testing inequalities involving weighted sums of error probabilities.
Worflow with AI: we first manually wrote a blueprint in latex with every definition and lemma we need [NL_Blueprint_NP_Lemma.pdf](https://github.com/user-attachments/files/28199645/NL_Blueprint_NP_Lemma.pdf). then we checked the Mathlib API with claude code, chatgpt and LeanSearch, We manually wrote the outline, in the outline version we deleted the discussion on gamma in the blueprint - since we have used the version of the NP lemma that uses the likelihood ratio to construct the test, rather than writing in terms of comparisons of Radon-Nikodym derivatives with a common dominating measure, and hence have used gamma to arbitrarily define likelihood-ratio sets of measure zero under the null hypothesis. This choice is motivated by the downstream derivation of errors of NP tests. since we are unfamiliar with mathlib naming style, we used claude code skill for proof golfing and some syntax correction, eg whether should use unfold or simp only [];
Co-authored-by: Rajarshi Mukherjee <ram521@mail.harvard.edu>
--- |
t-measure-probability
new-contributor
LLM-generated
merge-conflict
|
179/0 |
Mathlib.lean,Mathlib/Probability/Decision/HypothesisTesting/NeymanPearson.lean |
2 |
4 |
['github-actions', 'grunweg', 'mathlib-merge-conflicts'] |
nobody |
38-64672 1 month ago |
58-63996 58 days ago |
0-289 4 minutes |
| 40495 |
gw90 author:gw90 |
feat: weighted graphs with killing term |
Adding basic definitions and API for weighted graphs and weighted graphs with killing term.
---
My goal is to develop the basic theory from the beginning of [this textbook](https://www.math.uni-potsdam.de/fileadmin/user_upload/Prof-GraphTh/Keller/KellerLenzWojciechowski_GraphsAndDiscreteDirichletSpaces_wu_version.pdf). I also have some definitions and lemmas regarding Dirichlet forms and Laplacians to PR later, but I tried to pare down this first PR as much as possible. It currently has only 4 main definitions and sufficient API to demonstrate their correctness.
Note that I did not use [SimpleGraph.edgeLabeling](https://leanprover-community.github.io/mathlib4_docs/find/?pattern=SimpleGraph.EdgeLabeling#doc) for the edgeWeight function because it is important that vertices that are not adjacent have an edge weight of zero. That is, the edgeWeight must be defined for all pairs of vertices and respect the underlying adjacency relation on the graph.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
368/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Weighted/Basic.lean,docs/references.bib |
3 |
2 |
['github-actions'] |
nobody |
38-62640 1 month ago |
40-48275 40 days ago |
40-47739 40 days |
| 35017 |
robo7179 author:robo7179 |
feat(Combinatorics/SimpleGraph/Acyclic): every nontrivial tree has at least two leaves |
Add two theorems to prove that every non trivial tree has at least two leaves (one in Finite the other in Acyclic).
---
- [x] depends on: #37399
- [x] depends on: #37400
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
awaiting-author
merge-conflict
|
24/0 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Finite.lean |
2 |
46 |
['IvanRenison', 'SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'robo7179'] |
YaelDillies assignee:YaelDillies |
37-57540 1 month ago |
126-79654 126 days ago |
35-3753 35 days |
| 40615 |
SnkXyx author:SnkXyx |
feat(Algebra/MvPolynomial/CharacteristicSet): add pseudo division for TriangularSet |
This PR defines the **pseudo division** for a triangular set:
* `MvPolynomial.serPseudo g S`: Pseudo-division of a multivariate polynomial `g` by a triangular set `S`, which pseudo-divides `g` successively by elements of `S`.
* `MvPolynomial.IsSetRemainder r g S`: A remainder `r` of `g` by `S` is a polynomial which is reduced with respect to `S` and
suffices `(∏ i, (S i).initial ^ es[i]) * g = (∑ i, qs[i] * S i) + r` for some `es : List ℕ` and `qs : List (MvPolynomial σ R)`.
The definition and supporting results on `pseudo` used in this development were introduced in PR #40614 .
The definition was originally developed in PR #36103 as part of the formalization of the Characteristic Set Method (Wu-Ritt Method). The Characteristic Set project aims to formalize the algorithmic method for solving systems of multivariate polynomial equations in Lean 4, providing foundational infrastructure for algebraic geometry based on triangular decomposition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #40538
- [ ] depends on: #40542
- [ ] depends on: #40543
- [ ] depends on: #40614
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
new-contributor
blocked-by-other-PR
label:t-algebra$ |
1849/0 |
Mathlib.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/PseudoDivision.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/Reduced.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/TriangularSet.lean,Mathlib/Algebra/MvPolynomial/Initial.lean,Mathlib/Algebra/MvPolynomial/Variables.lean |
6 |
4 |
['SnkXyx', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
37-32514 1 month ago |
37-37349 37 days ago |
0-15 15 seconds |
| 40614 |
SnkXyx author:SnkXyx |
feat(Algebra/MvPolynomial/CharacteristicSet): add pseudo division for MvPolynomial |
This PR defines the **pseudo division** for a multivariate polynomial:
* `MvPolynomial.pseudoOf i g f`: Pseudo-division of `g` by `f` with respect to a variable `i`, computes `q` and `r` such that `f.initialOf i ^ s * g = q * f + r`, where `r.degreeOf i < f.degreeOf i`
* `MvPolynomial.pseudo g f`: pseudo-division of `g` by `f`. If `f` is non-constant, it performs pseudo-division with respect to `f.vars.max`.
The definition was originally developed in PR #36103 as part of the formalization of the Characteristic Set Method (Wu-Ritt Method). The Characteristic Set project aims to formalize the algorithmic method for solving systems of multivariate polynomial equations in Lean 4, providing foundational infrastructure for algebraic geometry based on triangular decomposition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #40538
- [ ] depends on: #40542
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
new-contributor
blocked-by-other-PR
label:t-algebra$ |
935/0 |
Mathlib.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/PseudoDivision.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/Reduced.lean,Mathlib/Algebra/MvPolynomial/Initial.lean |
4 |
4 |
['SnkXyx', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
37-32513 1 month ago |
37-37928 37 days ago |
0-29 29 seconds |
| 40619 |
SnkXyx author:SnkXyx |
feat(Algebra/MvPolynomial/CharacteristicSet): add ascending set and basic set |
This PR defines a class `AscendingSetTheory`, the abstract theory of **ascending sets** and **basic sets**.
An ascending set is a triangular set with additional reduction properties.
A basic set is the "smallest" ascending set contained in a given set of polynomials.
The class requires three paramaters, the last one is a predicate `TriangularSet σ R → Prop`, indicating whether an triangular set is an ascending set.
Different instances can implement Ritt's ascending sets or Wu's ascending sets.
The definition was originally developed in PR #36103 as part of the formalization of the Characteristic Set Method (Wu-Ritt Method). The Characteristic Set project aims to formalize the algorithmic method for solving systems of multivariate polynomial equations in Lean 4, providing foundational infrastructure for algebraic geometry based on triangular decomposition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #40537
- [ ] depends on: #40542
- [ ] depends on: #40543
- [ ] depends on: #40544
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
new-contributor
blocked-by-other-PR
label:t-algebra$ |
2589/0 |
Mathlib.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/AscendingSet.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/Rank.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/Reduced.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/TriangularSet.lean,Mathlib/Algebra/MvPolynomial/Initial.lean,Mathlib/Algebra/MvPolynomial/Variables.lean |
7 |
4 |
['SnkXyx', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
37-24789 1 month ago |
37-29338 37 days ago |
0-35 35 seconds |
| 40617 |
SnkXyx author:SnkXyx |
feat(Algebra/MvPolynomial/CharacteristicSet): define rank for TriangularSet |
This PR defines the **rank** of a triangular set:
* `TriangularSet.rank`: The rank of a triangular set is a lexicographic sequence of ranks of its polynomials.
A more intuitive definition is `rank_lt_iff`, `S < T` if one of the following two occurs:
1. There exists some `k < S.length` such that
`S₀ ≈ T₀`, `S₁ ≈ T₁`, ..., `Sₖ₋₁ ≈ Tₖ₋₁` and `Sₖ < Tₖ`.
2. `S.length > T.length` and `∀ i < T.length, Sᵢ ≈ Tᵢ`
The rank induces a natural preorder on triangular sets. The definition and supporting results on `TriangularSet` and rank of `MvPolynomial` used in this development were respectively introduced in PR #40543 and PR #40544 .
This definition was originally developed in PR #36103 as part of the formalization of the Characteristic Set Method (Wu-Ritt Method). The Characteristic Set project aims to formalize the algorithmic method for solving systems of multivariate polynomial equations in Lean 4, providing foundational infrastructure for algebraic geometry based on triangular decomposition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #40537
- [ ] depends on: #40543
- [ ] depends on: #40544
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
new-contributor
blocked-by-other-PR
label:t-algebra$ |
1652/0 |
Mathlib.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/Rank.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/TriangularSet.lean,Mathlib/Algebra/MvPolynomial/Initial.lean,Mathlib/Algebra/MvPolynomial/Variables.lean |
5 |
4 |
['SnkXyx', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
37-24787 1 month ago |
37-31108 37 days ago |
0-39 39 seconds |
| 36103 |
SnkXyx author:SnkXyx |
feat(Algebra/MvPolynomial/CharacteristicSet): add Characteristic Set |
This PR adds some definitions and theorems of Characteristic Set Method (also known as Wu's Method).
This pr aims to formalize the algorithmic method for solving systems of multivariate polynomial equations in Lean 4, providing foundational infrastructure for algebraic geometry based on triangular decomposition.
Main Result:
* `MvPolynomial.List.vanishingSet_eq_zeroDecomposition_union`: The zero set of a polynomial system $PS$ can be decomposed into a finite union of "quasi-varieties" defined by triangular sets:
$Zero(PS) = \bigcup_{CS \in \mathcal{ZD}} Zero(CS / \text{InitialProd}(CS))$
The PR is upstreamized from [github.com/WuProver/lean_characteristic_set](https://github.com/WuProver/lean_characteristic_set)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36386
- [x] depends on: #37791
- [ ] depends on: #40537
- [ ] depends on: #40538
- [ ] depends on: #40542
- [ ] depends on: #40543
- [ ] depends on: #40544
- [ ] depends on: #40614
- [ ] depends on: #40615
- [ ] depends on: #40617
- [ ] depends on: #40619
[](https://gitpod.io/from-referrer/) |
t-algebra
new-contributor
WIP
blocked-by-other-PR
label:t-algebra$ |
3627/0 |
Mathlib.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/AscendingSet.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/CharacteristicSet.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/PseudoDivision.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/Rank.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/Reduced.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/TriangularSet.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Initial.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,docs/references.bib |
11 |
26 |
['Hagb', 'SnkXyx', 'faenuccio', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
37-12211 1 month ago |
43-24788 43 days ago |
36-65702 36 days |
| 39579 |
hawkrobe author:hawkrobe |
feat(RingTheory): Bialgebra / Hopf algebra structure on SymmetricAlgebra |
Adds Hopf algebra structure on SymmetricAlgebra.
---
- [x] depends on: #39483
- [x] depends on: #39785
- [ ] depends on: #39841
- [ ] depends on: #31898
- [ ] depends on: #39790 |
t-ring-theory
new-contributor
blocked-by-other-PR
merge-conflict
|
691/22 |
Mathlib.lean,Mathlib/LinearAlgebra/TensorAlgebra/Basic.lean,Mathlib/RingTheory/Bialgebra/Primitive.lean,Mathlib/RingTheory/Bialgebra/Quotient.lean,Mathlib/RingTheory/Bialgebra/SymmetricAlgebra.lean,Mathlib/RingTheory/Bialgebra/TensorAlgebra.lean,Mathlib/RingTheory/Coalgebra/Quotient.lean,Mathlib/RingTheory/HopfAlgebra/Generators.lean,Mathlib/RingTheory/HopfAlgebra/Primitive.lean,Mathlib/RingTheory/HopfAlgebra/Quotient.lean,Mathlib/RingTheory/HopfAlgebra/SymmetricAlgebra.lean,Mathlib/RingTheory/HopfAlgebra/TensorAlgebra.lean |
12 |
14 |
['YaelDillies', 'github-actions', 'hawkrobe', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
YaelDillies assignee:YaelDillies |
36-69280 1 month ago |
58-68712 58 days ago |
1-18386 1 day |
| 39256 |
Sfgangloff author:Sfgangloff |
feat(SymbolicDynamics): add monotonicity lemma for LanguageOn |
In Symbolic dynamics.
Proof that the language of a set of configurations is monotone with respect to inclusion of configuration sets:
X ⊆ Y → LanguageOn X U ⊆ LanguageOn Y U
The proof is a direct unfolding of definitions: a pattern in the language of X comes from restricting some configuration x ∈ X, and inclusion X ⊆ Y allows the same witness to be used for Y.
Related to issue #39252 |
t-dynamics
new-contributor
awaiting-author
|
9/1 |
Mathlib/Dynamics/SymbolicDynamics/Basic.lean |
1 |
4 |
['github-actions', 'sgouezel'] |
sgouezel assignee:sgouezel |
36-7452 1 month ago |
36-7452 36 days ago |
34-79890 34 days |
| 39162 |
anovickis author:anovickis |
feat(Topology/PartitionOfUnity): add pointwise_decomposition_finsum + companions |
Add three short lemmas to `Mathlib/Topology/PartitionOfUnity.lean` extending the existing `PartitionOfUnity` API:
- `pointwise_decomposition_finsum` — for `f : X → ℝ` and `x ∈ s`, `f x = ∑ᶠ i, ρ i x · f x`. This is the pointwise step that lifts to integral linearity in measure-theoretic PoU integration: `∫_s f dμ = ∑ᶠ i, ∫_s (ρ i · f) dμ`.
- `one_minus_sum_nonneg` — `0 ≤ 1 - ∑ᶠ i, ρ i x`. Direct rearrangement of the existing `sum_le_one` field; useful as a complement-mass remainder bound in chart-by-chart estimates.
- `abs_le_one` — `|ρ i x| ≤ 1`. Combines the existing `nonneg` and `le_one`; convenience for absolute-value bounds.
All three are short proofs using existing structure fields (`sum_eq_one`, `sum_le_one`, `nonneg`, `le_one`).
These came up while writing chart-by-chart Stokes-on-manifold estimates where one wants to decompose `∫_M f` into chart-supported pieces using a partition of unity. The pointwise identity is the obvious first step; the other two are complementary algebraic bounds that show up in remainder estimates.
---
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
t-topology
new-contributor
LLM-generated
awaiting-author
|
27/0 |
Mathlib/Topology/PartitionOfUnity.lean |
1 |
6 |
['github-actions', 'j-loreaux'] |
j-loreaux assignee:j-loreaux |
35-70171 1 month ago |
35-70171 35 days ago |
36-60965 36 days |
| 26413 |
michaellee94 author:michaellee94 |
feat: existence of maximal solutions for ODEs meeting Picard-Lindelöf conditions |
Add existence proof for maximal solution of ODE using Picard-Lindelöf and a uniqueness theorem using Grönwall's lemma.
---
- [x] depends on: #26382
- [x] depends on: #29186
- [x] depends on: #35043
- [ ] depends on: #40687
[](https://gitpod.io/from-referrer/) |
new-contributor
t-analysis
blocked-by-other-PR
|
662/1 |
Mathlib.lean,Mathlib/Analysis/ODE/ExistUnique.lean,Mathlib/Analysis/ODE/MaximalSolution.lean,docs/undergrad.yaml |
4 |
114 |
['botbaki-review', 'github-actions', 'grunweg', 'leanprover-community-bot-assistant', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'michaellee94', 'winstonyin'] |
nobody |
35-6048 1 month ago |
35-63174 35 days ago |
0-7993 2 hours |
| 40599 |
ChiCubed author:ChiCubed |
feat(LinearAlgebra): rank-nullity theorems for Submodule map/comap |
We show forms of the rank-nullity theorem involving `Submodule.map` and `Submodule.comap`. Together with `LinearMap.ker_comp` this provides a formula for the rank of the kernel of a composite (and, in finite dimensions at least, for the rank of the range).
---
I didn't explicitly write the aforementioned formula for rank ker (f ∘ g) since it is just `LinearMap.ker_comp` followed by `LinearMap.lift_rank_comap`, but perhaps it should be added for discoverability?
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
58/8 |
Mathlib/Algebra/Module/Submodule/Ker.lean,Mathlib/Algebra/Module/Submodule/Map.lean,Mathlib/Algebra/Module/Submodule/Range.lean,Mathlib/LinearAlgebra/Dimension/RankNullity.lean |
4 |
5 |
['ChiCubed', 'github-actions', 'themathqueen', 'wwylele'] |
nobody |
35-4779 1 month ago |
37-77388 37 days ago |
37-78822 37 days |
| 38606 |
dennj author:dennj |
feat: preparation for Vanishing Sum of Roots of Unity |
Adds the Mathlib API extensions needed for an upcoming formalization of the Lam-style classification theorem for vanishing sums of roots of unity.
* Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean
+ `exists_eq_const_of_sum_smul_eq_zero_of_sum_eq_zero_of_linearIndependent`: if `∑ vᵢ = 0` and the first `n-1` of `n` vectors are linearly independent, every linear relation has constant coefficients.
* Mathlib/RingTheory/Radical/NatInt.lean
+ `Nat.totient_eq_div_radical_mul_totient_radical`: Euler's totient splits as `φ(n) = (n / rad n) * φ(rad n)`.
* Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean
+ `IsPrimitiveRoot.sum_range_pow_mul_div_eq_zero_of_dvd`: the `d` evenly-spaced powers of a primitive `k`-th root sum to zero, for `d ∣ k` and `1 < d`.
* Mathlib/NumberTheory/Cyclotomic/LinearDisjoint.lean (new)
+ `IsPrimitiveRoot.linearDisjoint_adjoin_pow_of_coprime`: cyclotomic subfields of coprime orders are linearly disjoint over `ℚ`.
* Mathlib/NumberTheory/Cyclotomic/LinearRelations.lean (new)
+ `IsPrimitiveRoot.coeffs_eq_of_sum_pow_eq_zero_prime_coprime`: in the cyclotomic field of order `p * m` with `p` prime coprime to `m`, any `ℚ⟮ζ^p⟯`-linear relation among powers of `ζ^m` has all coefficients equal.
---
I need these as preparation to start formalizing the theorem:
Let k be a positive integer. If a finite family of complex k-th roots of unity sums to zero, then the size of the family is a non-negative integer combination of the prime divisors of k.
---
Human-made PR with AI used for golfing and documentation |
new-contributor |
219/0 |
Mathlib.lean,Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean,Mathlib/NumberTheory/Cyclotomic/LinearDisjoint.lean,Mathlib/NumberTheory/Cyclotomic/LinearRelations.lean,Mathlib/RingTheory/Radical/Totient.lean,Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean |
6 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
34-49067 1 month ago |
34-51117 34 days ago |
42-82229 42 days |
| 39518 |
abeldonate author:abeldonate |
feat(RingTheory/LocalProperties/Projective): Projective Module theorem |
Theorem: R Noetherian, M finitely generated R-Mod. Then:
M projective iff M_m free for all m maximal
|
t-ring-theory
new-contributor
large-import
awaiting-author
|
21/0 |
Mathlib/RingTheory/LocalProperties/Projective.lean |
1 |
11 |
['abeldonate', 'github-actions', 'jjdishere', 'mbkybky', 'vlad902'] |
jjdishere assignee:jjdishere |
34-41379 1 month ago |
34-41399 34 days ago |
30-2702 30 days |
| 40538 |
SnkXyx author:SnkXyx |
feat(Algebra/MvPolynomial): define initial for MvPolynomial |
This PR defines the **initialOf** and **initial** of a multivariate polynomial:
* `MvPolynomial.initialOf`: The initial of `p` with respect to a specific variable `i` is the coefficient of `X i ^ degᵢ(p)` (a polynomial).
* `MvPolynomial.initial`: The initial of `p` with respect to its max variable.
The definition was originally developed in PR #36103 as part of the formalization of the Characteristic Set Method (Wu-Ritt Method). The Characteristic Set project aims to formalize the algorithmic method for solving systems of multivariate polynomial equations in Lean 4, providing foundational infrastructure for algebraic geometry based on triangular decomposition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
new-contributor
label:t-algebra$ |
484/0 |
Mathlib.lean,Mathlib/Algebra/MvPolynomial/Initial.lean |
2 |
2 |
['github-actions'] |
nobody |
34-38936 1 month ago |
40-19700 40 days ago |
0-77 1 minute |
| 40542 |
SnkXyx author:SnkXyx |
feat(Algebra/MvPolynomial/CharacteristicSet): define reduction relation for MvPolynomial |
This PR defines the **reducedTo** for a multivariate polynomial:
* `MvPolynomial.reducedTo`: A polynomial `q` is reduced with respect to `p` if either `q = 0` or the degree of `q` in `p`'s main variable is strictly less than the degree of `p`.
* `MvPolynomial.reducedToSet`: `q` is reduced with respect to a set if it is reduced with respect to all elements of the set.
The definition was originally developed in PR #36103 as part of the formalization of the Characteristic Set Method (Wu-Ritt Method). The Characteristic Set project aims to formalize the algorithmic method for solving systems of multivariate polynomial equations in Lean 4, providing foundational infrastructure for algebraic geometry based on triangular decomposition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
new-contributor
label:t-algebra$ |
100/0 |
Mathlib.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/Reduced.lean |
2 |
3 |
['SnkXyx', 'github-actions'] |
nobody |
34-22125 1 month ago |
40-8403 40 days ago |
0-15 15 seconds |
| 40544 |
SnkXyx author:SnkXyx |
feat(Algebra/MvPolynomial/CharacteristicSet): define rank for MvPolynomial |
This PR defines the **rank** of a multivariate polynomial:
* `MvPolynomial.rank`: the rank of a polynomial `p` is the pair `(maxVar p, mainDegree p)` ordered lexicographically.
The rank induces a natural preorder on multivariate polynomials by comparing first their main variables and then their main degrees. The definition and supporting results on `mainDegree` used in this development were introduced in PR #40537.
This definition was originally developed in PR #36103 as part of the formalization of the Characteristic Set Method (Wu-Ritt Method). The Characteristic Set project aims to formalize the algorithmic method for solving systems of multivariate polynomial equations in Lean 4, providing foundational infrastructure for algebraic geometry based on triangular decomposition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #40537
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
new-contributor
blocked-by-other-PR
label:t-algebra$ |
232/0 |
Mathlib.lean,Mathlib/Algebra/MvPolynomial/CharacteristicSet/Rank.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Variables.lean |
4 |
8 |
['SnkXyx', 'faenuccio', 'github-actions', 'leanprover-radar', 'mathlib-dependent-issues'] |
nobody |
34-12048 1 month ago |
40-6242 40 days ago |
0-61 1 minute |
| 39410 |
RaggedR author:RaggedR |
feat(RingTheory/HopfAlgebra): Hopf algebra structure on polynomials (𝔾ₐ) |
This is the beginning of a formalization of the first half of my masters thesis (https://arxiv.org/abs/0907.3950).
In particular we look at the ring of polynomials in a single variable with the usual multiplication and coproduct given by: Δ(X) = X ⊗ 1 + 1 ⊗ X. The counit is evaluation at zero, and the antipode is S(x) = -x.
The mathematics itself comes from my masters thesis (and is well known). This is a first step towards an implementation of the umbral calculus of Gian-Carlo Rota and then its generalization to Symmetric Functions (which I believe is original).
---
[](https://gitpod.io/from-referrer/)
---
LLM tools were used to assist with Lean formalization. The mathematical content is the author's own work. |
t-ring-theory
new-contributor
LLM-generated
awaiting-author
|
205/0 |
Mathlib.lean,Mathlib/RingTheory/HopfAlgebra/Polynomial.lean |
2 |
30 |
['RaggedR', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'themathqueen', 'wwylele'] |
nobody |
33-86207 1 month ago |
61-71689 61 days ago |
6-19410 6 days |
| 40791 |
vvvv-ops author:vvvv-ops |
feat(RingTheory/DedekindDomain): dirichlet's s-unit theorem |
Proves the `Future work` of `RingTheory/DedekindDomain/SInteger.lean`: finite generation of `S`-units and Dirichlet's `S`-unit theorem.
For a Dedekind domain `R` with fraction field `K` and a finite set `S` of height-one primes, this adds the `S`-valuation map `Set.unitValuation` with kernel the `∅`-units (`Set.unitValuation_ker`), finite generation `Set.unit_fg`, and the exact rank `Set.finrank_eq`: `finrank ℤ (Additive 𝒪_{K,S}ˣ) = finrank ℤ (Additive 𝒪_Kˣ) + |S|`, plus the number-field specialisation `Set.unit_finrank_numberField` (`= (r₁ + r₂ - 1) + |S|`). The proof uses the short exact sequence `1 → 𝒪_Kˣ → 𝒪_{K,S}ˣ → ⊕_{v∈S} ℤ`: the kernel is the units, and the image has finite index because its cokernel embeds in the (finite) class group.
The general finiteness helpers `Module.Finite.of_fg_ker_of_fg_range`, `CommGroup.fg_of_fg_ker_of_fg_range`, `Subgroup.fg_of_fg_commGroup` are included in the file for now — happy to move them to `RingTheory/Finiteness` / `GroupTheory/Finiteness` if preferred.
|
t-ring-theory
new-contributor
|
339/0 |
Mathlib.lean,Mathlib/RingTheory/DedekindDomain/SUnit.lean,scripts/noshake.json |
3 |
3 |
['github-actions'] |
nobody |
33-34833 1 month ago |
33-37721 33 days ago |
33-37185 33 days |
| 40579 |
jcreinhold author:jcreinhold |
feat(Algebra/Category/Ring): preserve limits to CommMonCat |
Adds the missing instance saying that forgetting a commutative ring to its multiplicative commutative monoid preserves limits. |
t-algebra
new-contributor
label:t-algebra$ |
7/0 |
Mathlib/Algebra/Category/Ring/Limits.lean |
1 |
7 |
['felixpernegger', 'github-actions', 'jcreinhold'] |
nobody |
33-32452 1 month ago |
38-17524 38 days ago |
38-25462 38 days |
| 39981 |
MarAndrey77 author:MarAndrey77 |
feat(Analysis/Convex): prove Shapley-Folkman lemma |
## Summary
This PR adds a formal proof of the Shapley-Folkman lemma for finite sums of sets in finite-dimensional real vector spaces.
The main theorem states that if a point belongs to a finite sum of convex hulls, then it can be represented as a sum where all but at most `finrank ℝ E` terms belong to the original sets.
## Main declarations
* `shapley_folkman`
* `shapley_folkman_exists_choice`
* `ShapleyFolkmanRep.nonsingleton_card_le_finrank_of_minimal`
## Implementation notes
The proof uses a minimal-complexity representation and a perturbation argument to bound the number of nonsingleton convex combinations by `Module.finrank ℝ E`.
## AI usage
AI assistance was used during this project. In particular, it was used to help identify existing Mathlib theorems that could be useful for the proof, and to analyze Lean error messages while debugging the formalization.
## Checks
* `lake exe mk_all`
* `lake build Mathlib.Analysis.Convex.ShapleyFolkman`
* no `sorry`
* no linter warnings |
awaiting-author
t-analysis
new-contributor
|
1297/0 |
Mathlib.lean,Mathlib/Analysis/Convex/ShapleyFolkman.lean |
2 |
10 |
['MarAndrey77', 'github-actions', 'grunweg', 'wwylele'] |
nobody |
32-84564 1 month ago |
54-78501 54 days ago |
0-123 2 minutes |
| 36757 |
alok author:alok |
feat(Order/Filter): add Filter.IsFree and Filter.IsNonprincipal |
## Summary
Adds two filter predicates and their basic API:
- **`Filter.IsFree`**: no point belongs to every set (`f.ker = ∅`), equivalently `f ≤ cofinite`
- **`Filter.IsNonprincipal`**: not equal to `𝓟 s` for any set `s`
Every free `NeBot` filter is non-principal (`IsFree.isNonprincipal`), but the converse fails for general filters (e.g. `𝓝 x` in a non-discrete T₁ space is non-principal but not free). For ultrafilters the two notions coincide (`Ultrafilter.isNonprincipal_iff_isFree`).
On finite types, no `NeBot` filter is free (`not_isFree_of_neBot`).
## Test plan
- [x] `lake build Mathlib.Order.Filter.Cofinite` passes
- [x] `lake build Mathlib.Order.Filter.Ultrafilter.Basic` passes
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
t-order
new-contributor
LLM-generated
|
98/1 |
Mathlib/Order/Filter/Cofinite.lean,Mathlib/Order/Filter/Ultrafilter/Basic.lean |
2 |
3 |
['felixpernegger', 'github-actions'] |
nobody |
32-68630 1 month ago |
127-38962 127 days ago |
0-3928 1 hour |
| 32608 |
PrParadoxy author:PrParadoxy |
feat(LinearAlgebra/PiTensorProduct): API for PiTensorProducts indexed by sets |
This PR addresses a TODO item in LinearAlgebra/PiTensorProduct.lean:
* API for the various ways ι can be split into subsets; connect this
with the binary tensor product
-- specifically by describing tensors of type ⨂ (i : S), M i, for S : Set ι.
Our primary motivation is to formalise the notion of "restricted tensor
products". This will be the content of a follow-up PR.
Beyond that, the Set API is natural in contexts where the index type has
an independent interpretation. An example is quantum physics, where ι
ranges over distinguishable degrees of freedom, and where its is common
practice to annotate objects by the set of indices they are defined on.
---
Stub file with preliminary definition of the restricted tensor product as a direct limit of tensors indexed by finite subsets of an index type:
https://github.com/PrParadoxy/mathlib4/blob/restricted-stub/Mathlib/LinearAlgebra/PiTensorProduct/Restricted.lean
---
- [x] depends on: #32598
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
awaiting-zulip
t-algebra
WIP
merge-conflict
label:t-algebra$ |
300/2 |
Mathlib.lean,Mathlib/LinearAlgebra/PiTensorProduct.lean,Mathlib/LinearAlgebra/PiTensorProduct/Set.lean |
3 |
32 |
['PrParadoxy', 'dagurtomas', 'eric-wieser', 'github-actions', 'goliath-klein', 'leanprover-radar', 'mathlib-merge-conflicts', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
32-61707 1 month ago |
211-77415 211 days ago |
10-66980 10 days |
| 40677 |
nrs-status author:nrs-status |
chore: update `Data.PFunctor.Univariate.M` docstring with example usage |
It is not clear how to make use of the `PFunctor.M` API, an example is added.
Following https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Possibly.20infinite.20trees/near/592161797 |
t-data
new-contributor
|
37/0 |
Mathlib/Data/PFunctor/Univariate/M.lean |
1 |
11 |
['eric-wieser', 'github-actions', 'nrs-status'] |
nobody |
32-13435 1 month ago |
32-13237 32 days ago |
0-4260 1 hour |
| 40539 |
edwardfalk author:edwardfalk |
feat(NumberTheory/LSeries): trivial and nontrivial zeros of riemannZeta |
This PR adds the sets of trivial and nontrivial zeros of the Riemann zeta function to
`Mathlib/NumberTheory/LSeries/ZetaZeros.lean`:
- `riemannZetaTrivialZeros` : the set `{-2, -4, -6, …}`, with a membership lemma and
the inclusion into `riemannZetaZeros` (via `riemannZeta_neg_two_mul_nat_add_one`);
- `riemannZetaNontrivialZeros` : zeros that are neither trivial nor the point `s = 1`,
with a membership lemma and the inclusion into `riemannZetaZeros`;
- `riemannHypothesis_iff_nontrivialZeros` : `RiemannHypothesis` is equivalent to the
statement that every nontrivial zero has real part `1/2`.
Motivation: the set-based formulation is the natural interface for follow-up work on
the Riemann xi function (follow-up PR adds `riemannXi` with the unconditional zero
characterization `riemannXi s = 0 ↔ s ∈ riemannZetaNontrivialZeros`) and, further out,
for Li's criterion, whose coefficient sums range over the nontrivial zero set.
Disclosure: this code was written with substantial assistance from Claude (Anthropic),
as part of a long-running formalization project; I have reviewed it, it is sorry-free,
and it builds and lints clean at master. Please apply the `LLM-generated` label.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
|
t-number-theory
new-contributor
LLM-generated
awaiting-author
|
51/0 |
Mathlib/NumberTheory/LSeries/ZetaZeros.lean |
1 |
4 |
['felixpernegger', 'github-actions', 'loefflerd'] |
loefflerd assignee:loefflerd |
31-79658 1 month ago |
31-79658 31 days ago |
8-26005 8 days |
| 40464 |
roos-j author:roos-j |
feat(Analysis/Complex): add `conj_exp_ofReal_mul_I` |
---
This is maybe natural enough to not need justification, but is also useful in https://github.com/roos-j/lean-oscillatory
|
t-analysis
new-contributor
WIP
|
3/0 |
Mathlib/Analysis/Complex/Trigonometric.lean |
1 |
4 |
['github-actions', 'roos-j', 'themathqueen'] |
nobody |
31-10210 1 month ago |
32-60659 32 days ago |
3-52083 3 days |
| 40707 |
fraware author:fraware |
CategoryTheory: add naturality and whiskering reference examples |
## Summary
- Add a naturality square example in `NatTrans.lean` closing via `rw [← NatTrans.naturality]`.
- Add whiskering component and naturality square examples in `Whiskering.lean` (`whiskerRight_app`, `whiskerLeft_app`, and `rw [← NatTrans.naturality]`).
- Add functoriality reference examples in `Functor/Basic.lean` (`map_id`, `map_comp`, composed-functor `map_id`).
- Add a Yoneda composite-map usage example in `Yoneda.lean`.
These are reference examples from a category-theory proof friction survey; no new lemmas or imports.
## Test plan
- [x] `lake build Mathlib.CategoryTheory.Functor.Basic`
- [x] `lake build Mathlib.CategoryTheory.NatTrans`
- [x] `lake build Mathlib.CategoryTheory.Whiskering`
- [x] `lake build Mathlib.CategoryTheory.Yoneda`
- [ ] No new `import` lines; examples use lemmas already in scope |
t-category-theory
new-contributor
awaiting-author
will-close-soon
|
36/0 |
Mathlib/CategoryTheory/Functor/Basic.lean,Mathlib/CategoryTheory/NatTrans.lean,Mathlib/CategoryTheory/Whiskering.lean,Mathlib/CategoryTheory/Yoneda.lean |
4 |
4 |
['github-actions', 'joelriou'] |
nobody |
30-33525 1 month ago |
35-11996 35 days ago |
0-23 23 seconds |
| 40711 |
fraware author:fraware |
doc(CategoryTheory/Limits): add reference examples for binary products and coproducts |
## Summary
Examples-only PR: four `noncomputable example` blocks in a new `section ReferenceExamples` of `BinaryProducts.lean`. No API, automation, or attribute changes.
The lemmas used (`limit.isLimit`, `colimit.isColimit`, `uniqueUpToIso`) are already in Mathlib; these examples document the canonical universal-property pattern for binary (co)product diagrams.
## Examples added
1. Canonical product cone is a limit: `IsLimit (limit.cone (pair X Y))` via `limit.isLimit (pair X Y)`
2. Uniqueness up to iso for limits: `c ≅ limit.cone (pair X Y)` via `hc.uniqueUpToIso (limit.isLimit (pair X Y))`
3. Canonical coproduct cocone is a colimit: `IsColimit (colimit.cocone (pair X Y))` via `colimit.isColimit (pair X Y)`
4. Uniqueness up to iso for colimits: `c ≅ colimit.cocone (pair X Y)` via `hc.uniqueUpToIso (colimit.isColimit (pair X Y))`
## Test plan
- [ ] `lake build Mathlib.CategoryTheory.Limits.Shapes.BinaryProducts`
- [ ] CI green
## Notes
Branch is based on tag `v4.31.0`. Targeting `master` (currently ahead of v4.31.0); the example API matches the current `limit.isLimit` / `colimit.isColimit` / `uniqueUpToIso` names on that release. |
t-category-theory
new-contributor
awaiting-author
will-close-soon
|
26/0 |
Mathlib/CategoryTheory/Limits/Shapes/BinaryProducts.lean |
1 |
3 |
['github-actions'] |
nobody |
30-33506 1 month ago |
35-3524 35 days ago |
0-5917 1 hour |
| 40812 |
karlesmarin author:karlesmarin |
feat(RingTheory/HopfAlgebra): the antipode is the unique convolution … |
…inverse of the identity
Add `HopfAlgebra.eq_antipode_of_convMul_id` and `HopfAlgebra.eq_antipode_of_id_convMul`: any R-linear map that is a one-sided convolution inverse of the identity equals the antipode. The proof is `left_inv_eq_right_inv` in the convolution monoid `WithConv (A →ₗ[R] A)`, using the two antipode axioms. This resolves the "uniqueness of Hopf algebra structure on a bialgebra" TODO and is the companion (uniqueness) to the existing `ofConvInverse` constructor (existence).
**AI disclosure.** This contribution was written with AI assistance (Claude, used as a coding assistant). I have reviewed and understand the proof and can justify the design. The result — uniqueness of the antipode — is classical; the contribution is its Lean formalization.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
LLM-generated
|
21/3 |
Mathlib/RingTheory/HopfAlgebra/Basic.lean |
1 |
5 |
['github-actions', 'karlesmarin', 'themathqueen'] |
nobody |
30-4553 1 month ago |
33-1911 33 days ago |
33-1375 33 days |
| 40280 |
mrdouglasny author:mrdouglasny |
feat(Analysis/Calculus/ParametricIntegral): one-sided differentiation under the integral |
Adds `hasDerivWithinAt_Ici_integral_of_dominated_loc_of_deriv_le`, the within-`Ici x₀` (right) analogue of `hasDerivAt_integral_of_dominated_loc_of_deriv_le`: differentiation under the integral sign where the derivative bound is required only on a **right**-neighborhood `s ∈ 𝓝[≥] x₀`, concluding `HasDerivWithinAt (fun x ↦ ∫ a, F x a ∂μ) (∫ a, F' x₀ a ∂μ) (Ici x₀) x₀`.
### Motivation
The existing two-sided theorem needs the domination on a full neighborhood of `x₀`. That fails for parametric integrals dominated only on one side — e.g. Gibbs / partition-function families `g ↦ ∫ A e ^ (-g • V)` where `V` is bounded below but not above, so the weight is integrable only for `g ≥ 0` (the Dyson-instability situation in constructive QFT). One still wants the one-sided derivative at the boundary.
### Proof
Rather than re-running the dominated-convergence argument, `F` is extended across `x₀` by its affine first-order part below `x₀`,
`G x a = if x₀ ≤ x then F x a else F x₀ a + (x - x₀) • F' x₀ a`,
which is two-sided dominated (the affine part has constant derivative `F' x₀ a`, bounded by `bound a`). The existing two-sided theorem applies to `G`, and since `G = F` on `Ici x₀`, the conclusion restricts to the desired `HasDerivWithinAt`.
I'm happy to adjust naming, or to generalize to an arbitrary set `t` (`𝓝[t] x₀`) if reviewers prefer — that would need the direct dominated-convergence proof rather than the extension trick.
|
t-analysis
new-contributor
awaiting-author
|
105/0 |
Mathlib/Analysis/Calculus/ParametricIntegral.lean |
1 |
3 |
['ADedecker', 'github-actions'] |
ADedecker assignee:ADedecker |
29-82671 29 days ago |
29-82671 29 days ago |
16-54932 16 days |
| 38476 |
agusakov author:agusakov |
refactor(Combinatorics/Digraph): add vertex sets |
---
Adopting #33466
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
awaiting-author
|
381/50 |
Mathlib/Combinatorics/Digraph/Basic.lean,Mathlib/Combinatorics/Digraph/Orientation.lean |
2 |
20 |
['Shreyas4991', 'YaelDillies', 'agusakov', 'github-actions'] |
nobody |
29-75806 29 days ago |
84-28110 84 days ago |
3-33232 3 days |
| 33985 |
YellPika author:YellPika |
feat(Order/OmegaCompletePartialOrder): `OmegaCompletePartialOrder` instance for `Sum` with basic `ωScottContinuous` lemmas |
This PR adds an `OmegaCompletePartialOrder` instance for `Sum`, along with `ωScottContinuous` lemmas for basic operations (`inl`, `inr`, `elim`). Appropriate lemmas are marked with `@[fun_prop]` so that the `fun_prop` tactic can automatically deduce `ωScottContinuous` proofs for functions involving `Sum`s (e.g. see the proof of `Sum.ωScottContinuous_map`).
---
- [x] depends on: #33941
- [x] depends on: #37258
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
t-order
awaiting-author
merge-conflict
|
205/3 |
Mathlib/Data/Sum/Basic.lean,Mathlib/Data/Sum/Order.lean,Mathlib/Order/OmegaCompletePartialOrder.lean,Mathlib/Order/ScottContinuity.lean,Mathlib/Topology/Constructions/SumProd.lean |
5 |
59 |
['Komyyy', 'Vierkantor', 'YaelDillies', 'YellPika', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
YaelDillies and pechersky assignee:pechersky assignee:YaelDillies |
29-56896 29 days ago |
110-245 109 days ago |
52-59724 52 days |
| 40963 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Paths): add lemma about the first dart if dropLast is a path |
If `dropLast` of a walk is a path, a dart of the walk sharing its first vertex with the walk also shares its second vertex.
I thought this was a natural more general form of `IsPath.eq_snd_of_mem_edges`, useful for cycles for example.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
16/0 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Operations.lean |
2 |
2 |
['github-actions'] |
nobody |
28-75256 28 days ago |
28-76110 28 days ago |
28-76236 28 days |
| 40900 |
judsonpereirademoura-netizen author:judsonpereirademoura-netizen |
feat(Analysis/Matrix): spectral theorem for normal matrices |
Adds the **spectral theorem for normal matrices** over `ℂ`: every normal matrix
(`IsStarNormal M`, i.e. `Mᴴ * M = M * Mᴴ`) is unitarily diagonalizable,
`M = U * diagonal μ * Uᴴ`. This extends `Matrix.IsHermitian.spectral_theorem`
(Hermitian case) to the normal case.
Specific to `ℂ` (algebraically closed): a real normal matrix — e.g. a planar rotation
`![![0,-1],![1,0]]` — is normal but not orthogonally diagonalizable over `ℝ`, hence the
hypothesis `Matrix n n ℂ` rather than `RCLike`.
### API (mirrors `Matrix.IsHermitian.*`)
- `normalEigenvectorBasis`, `normalEigenvalues`, `normalEigenvectorUnitary`
- `mulVec_normalEigenvectorBasis` (eigen equation); `normalEigenvectorUnitary_apply`/`_mulVec`
- `spectral_theorem_of_isStarNormal` (`M = U * diagonal μ * Uᴴ`)
- `exists_isUnitary_conj_diagonal_of_isStarNormal` (existential), `isStarNormal_of_isUnitary_conj_diagonal`
(converse), `isStarNormal_iff_exists_isUnitary_conj_diagonal` (iff)
### Proof
Cartesian decomposition `M = A + i•B` with `A = selfAdjointPart ℝ M` and
`B = -i • skewAdjointPart ℝ M`, both Hermitian. Normality of `M` is exactly `Commute A B`,
so `A`, `B` are commuting symmetric operators; the space splits as an internal direct sum of
their joint eigenspaces (`LinearMap.IsSymmetric.directSum_isInternal_of_commute`). A subordinate
orthonormal basis diagonalizes both, hence `M`.
---
*Notes for reviewers:* developed with AI assistance (Claude); the mathematics and proofs were
checked by the author. Locally validated against `v4.30.0-rc2`: `lake build` clean (0 warnings,
all style linters), `lake exe runLinter` passed, `#print axioms` = `[propext, Classical.choice,
Quot.sound]`. Opened as **draft** pending CI build against `master`. Naming/visibility happy to
adjust per review.
|
new-contributor
t-analysis
awaiting-author
LLM-generated
|
315/0 |
Mathlib.lean,Mathlib/Analysis/Matrix/NormalSpectrum.lean |
2 |
9 |
['github-actions', 'judsonpereirademoura-netizen', 'themathqueen', 'wwylele'] |
nobody |
28-55770 28 days ago |
unknown |
0-0 0 seconds |
| 40576 |
zhangmai19 author:zhangmai19 |
feat(Analysis/Convex): add Shapley-Folkman lemma |
The Shapley-Folkman lemma is a convex analysis result well-known in economics but rarely stated in math. Roughly: a sum of non-convex sets is "almost convex" — any point in the convex hull of the sum can be written as a sum of points from the individual convex hulls, and at most d of them actually need the convex hull (the rest are already in the original sets).
Closes #14427 |
t-analysis
new-contributor
awaiting-author
|
1022/0 |
Mathlib.lean,Mathlib/Analysis/Convex/ShapleyFolkman.lean,docs/references.bib |
3 |
12 |
['felixpernegger', 'github-actions', 'grunweg', 'zhangmai19'] |
YaelDillies assignee:YaelDillies |
28-33194 28 days ago |
38-30195 38 days ago |
0-424 7 minutes |
| 40200 |
AlecsFerra author:AlecsFerra |
feat(FinitelyPresentedGroup): add definitional equivalence with generating set given by S : Set G |
cc @homeowmorphism
- [x] depends on: #40726
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-group-theory
large-import
awaiting-author
|
26/6 |
Mathlib/GroupTheory/FinitelyPresentedGroup.lean |
1 |
12 |
['AlecsFerra', 'github-actions', 'javgomzar', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'tb65536'] |
tb65536 assignee:tb65536 |
27-80187 27 days ago |
41-10173 41 days ago |
7-56895 7 days |
| 39048 |
AydenLamp author:AydenLamp |
feat(Algebra/Group/Defs): add positive natural exponentiation for semigroups |
Introduce exponentiation for semigroups with positive natural exponents. This serves as a foundation for future results on Green’s relations and Rees matrix constructions in semigroups.
---
Co-authored-by: Howard Straubing <howard.straubing@bc.edu>
Soleil Repple <repple@bc.edu>
Nathan Hart-Hodgson <harthodg@bc.edu>
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebra
awaiting-author
label:t-algebra$ |
109/0 |
Mathlib.lean,Mathlib/Algebra/Group/SemigroupPow.lean |
2 |
7 |
['ScottCarnahan', 'github-actions', 'wwylele'] |
nobody |
27-48425 27 days ago |
75-64196 75 days ago |
0-115 1 minute |
| 38584 |
TJHeeringa author:TJHeeringa |
feat(Analysis/InnerProductSpace/Reproducing): Add outerKernel, mem_iff |
---
- [ ] depends on: #40362
- [ ] depends on: #40151
Adds the `outerKernel` definition and the theorem `mem_iff`. These are needed for proving statements involving embeddings of RKHS.
I can split `mem_of_posSemidef` and `mem_iff` off into a different pull request if that is preferred.
The theorems `mem_of_posSemidef` and `posSemidef_of_mem` are the two directions of `mem_iff`. `posSemidef_of_mem` is slightly stronger than the converse direction of `mem_iff` in the sense that it also specifies the constant `c` in the statement. The specified `c` is in fact the smallest possible `c` for which the statement holds.
The statement `mem_of_posSemidef` proves `∃ (g : H), (g : X → V) = f`. We could instead write `f ∈ (coeCLM 𝕜 (H:=H)).range`. Making this change would require the addition of the line `simp only [LinearMap.mem_range, coe_coe, coeCLM_apply]` in the beginning of the proof. The full beginning is then
```
lemma mem_of_posSemidef (f : X → V) {c : ℝ}
(hc : ((c : 𝕜) ^ 2 • kernel H - outerKernel 𝕜 f).PosSemidef) : f ∈ (coeCLM 𝕜 (H:=H)).range := by
simp only [LinearMap.mem_range, coe_coe, coeCLM_apply]
let Laux : ...
```
Making a `MemRKHS` like MemLp and MemSobolev and then writing `MemRKHS H f` is also an option. Happy to change it to whatever is preferred.
The proof of `mem_of_posSemidef` is based on the idea that any function f in the RKHS satisfies `<f,\sum_n K(\cdot,x_n)v_n>=\sum_{n} <f(x_n),v_n>` for `x_n\in X` and `v_n\in V` by the reproducing property. We define the operator L(\sum_n K(\cdot,x_n)v_n) = \sum_{n} <f(x_n),v_n>. This is bounded by the condition based on the kernels, and thus extends to a bounded linear operator on the RKHS. Its Riesz' representer agrees pointwise with f.
AI:
When asking how to avoid Classical.choose in constructing the operator L, Claude suggested the approach of going through the quotient. I made the proof using Claude as supplementary Loogle. Afterwards, I asked it to help shorted the proofs. Some suggestions for `mem_of_posSemidef` were applied. The other suggestions were not helping or not correct.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
new-contributor
awaiting-author
blocked-by-other-PR
|
143/3 |
Mathlib/Analysis/InnerProductSpace/Reproducing.lean |
1 |
25 |
['TJHeeringa', 'github-actions', 'j-loreaux', 'mathlib-dependent-issues', 'themathqueen'] |
j-loreaux assignee:j-loreaux |
26-63196 26 days ago |
28-67230 28 days ago |
31-31855 31 days |
| 33031 |
chiyunhsu author:chiyunhsu |
feat(Combinatorics/Enumerative/Partition): add combinatorial proof of Euler's partition theorem |
The new file EulerComb.lean contains the combinatorial proof of Euler's partition theorem. The analytic proof of the theorem and its generalization of Glaisher's Theorem has already been formalized in [Glaisher.lean](https://github.com/leanprover-community/mathlib4/blob/master/Mathlib/Combinatorics/Enumerative/Partition/Glaisher.lean). The generalization of the combinatorial proof from this file to Glaisher's Theorem is within reach.
---
Zulip discussion: [#mathlib4 > Glaisher’s Bijection on integer partitions](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Glaisher.E2.80.99s.20Bijection.20on.20integer.20partitions/with/570808111)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
awaiting-zulip
|
531/0 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Partition/EulerComb.lean |
2 |
8 |
['chiyunhsu', 'dagurtomas', 'github-actions', 'tb65536', 'vihdzp'] |
b-mehta assignee:b-mehta |
26-61388 26 days ago |
174-1508 174 days ago |
42-22427 42 days |
| 40967 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Paths): some lemmas about inducing walks |
Could also be done via `SimpleGraph.Walk.map_induce`, but I thought that doing it directly is not much worse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
|
48/0 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean,Mathlib/Data/List/Nodup.lean |
3 |
2 |
['github-actions'] |
nobody |
25-34882 25 days ago |
28-71108 28 days ago |
28-70657 28 days |
| 39820 |
samuelchassot author:samuelchassot |
feat(Combinatorics/SimpleGraph): an eulerian walk exists iff exactly 0 or 2 vertices have odd degree |
As per the TODO open in `Trails.lean`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
awaiting-author
|
671/3 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Eulerian.lean,Mathlib/Combinatorics/SimpleGraph/Trails.lean |
3 |
9 |
['SnirBroshi', 'YaelDillies', 'copilot-pull-request-reviewer', 'github-actions'] |
YaelDillies assignee:YaelDillies |
25-10864 25 days ago |
57-8275 57 days ago |
0-86024 23 hours |
| 38897 |
0xTerencePrime author:0xTerencePrime |
feat(Combinatorics/SetFamily): formalize 1D Sperner's Lemma parity |
Formalizes the 1-dimensional Sperner's Lemma (parity version): given a coloring of
the `n + 1` vertices of a subdivided line segment with two colors (`ZMod 2`), if the
two endpoints have different colors, then the number of color-changing edges is odd.
This is **distinct** from `IsAntichain.sperner` in `SetFamily.LYM`, which concerns
antichains in a power set. This file formalizes the topological/combinatorial parity
statement used as the base case in higher-dimensional Sperner arguments.
## Key declarations
- `SpernerColoring`: type-safe coloring via `Fin (n + 1) → ZMod 2`
- `edgeDiff`: color difference on adjacent vertices, computed in `ZMod 2`
- `totalDiff`: telescoping sum of all edge differences
- `diffEdges`: the `Finset` of bichromatic (color-changing) edges
- `sperner_1d`: main theorem — `Odd (diffEdges c).card`
## Design notes
- Using `Fin (n + 1) → ZMod 2` instead of `ℕ → ZMod 2` makes boundary conditions
unrepresentable at the type level, eliminating out-of-bounds cases entirely.
- The proof reduces to a telescoping sum in `ZMod 2`, using `CharTwo.add_self_eq_zero`
to cancel all interior vertices, avoiding parity case splits.
This is intended as the 1D base case, the approach generalizes to higher-dimensional
Sperner's Lemma in future work.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
awaiting-author
|
133/0 |
Mathlib.lean,Mathlib/Combinatorics/SetFamily/Sperner1D.lean |
2 |
4 |
['YaelDillies', 'github-actions', 'grunweg'] |
YaelDillies assignee:YaelDillies |
24-85155 24 days ago |
24-85155 24 days ago |
54-39797 54 days |
| 38113 |
robo7179 author:robo7179 |
feat(SimpleGraph/PerfectGraph): add lemma graph is perfect iff all su… |
Perfect graph theorem , discussion on zulip thread: [#graph theory > Second Order Monadic Logic](https://leanprover.zulipchat.com/#narrow/channel/252551-graph-theory/topic/Second.20Order.20Monadic.20Logic.20for.20Graph/with/583013775)
- [ ] depends on: #37680
- [ ] depends on: #37598 |
t-combinatorics
new-contributor
blocked-by-other-PR
|
54/0 |
Mathlib/Combinatorics/SimpleGraph/PerfectGraph.lean |
1 |
3 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
24-70529 24 days ago |
97-12186 97 days ago |
0-69 1 minute |
| 38223 |
Deicyde author:Deicyde |
feat(Geometry/Manifold): add `MfldCat`, the category of `C^n` manifolds |
We define `MfldCat 𝕜 n`: the category of `C^n` manifolds over a field `𝕜`, following the pattern of `TopCat` in
`Mathlib.Topology.Category.TopCat.Basic`. We also implement `HasForget₂ (MfldCat 𝕜 n) TopCat`—the forgetful functor into the category of topological spaces. For more discussion see the Zulip thread: [#PR reviews > #38223 The Category of C^n Manifolds](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/.2338223.20The.20Category.20of.20C.5En.20Manifolds/with/587038032)
Also added: `ContMDiffMap.id_apply`, `.coe_id` and `.coe_comp` which are comparable to `ContinuousMap` API.
### Future work
- ✅ Define a Monoidal structure via product manifolds, analogous to `Manifold.Topology.Category.TopCat.Monoidal` #38560
- ✅ Define the tangent functor: `M ↦ TM`, `F ↦ F.tangentMap` from `MfldCat (n+1) 𝕜` to `MfldCat n 𝕜` #38270
- Functor `FGModuleCat 𝕜 ⥤ MfldCat 𝕜 n` sending a finite-dimensional `𝕜`-vector space to the manifold modeled on itself. Left as `TODO`.
- Define `FGModuleCat 𝕜` as an enriched category over `MfldCat n 𝕜`. Then _smooth functors_ can be realized as endofunctors on the enriched category. This is the main motivation for this construction.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #41109 [The category of `C^n` manifolds on a fixed model]
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
new-contributor
t-category-theory
awaiting-author
blocked-by-other-PR
|
224/0 |
Mathlib.lean,Mathlib/Geometry/Manifold/Category/MfldCat/Basic.lean,Mathlib/Geometry/Manifold/ContMDiffMap.lean |
3 |
60 |
['Deicyde', 'chrisflav', 'dagurtomas', 'github-actions', 'idontgetoutmuch', 'mathlib-dependent-issues', 'peabrainiac'] |
joelriou assignee:joelriou |
24-68374 24 days ago |
28-77766 28 days ago |
59-40239 59 days |
| 40561 |
iosephusferrum author:iosephusferrum |
feat(ModelTheory): quantifier elimination for first-order theories |
This PR introduces `HasQuantifierElimination` for first-order languages, along with some standard criteria to establish it for any language that satisfies them and prerequisite formalization `mathlib4` required on elementary extension pairs (`IsElementaryExtensionPair`) and < κ-generated substructures (`CardinalLTGenerated`). It also states and proves that the first-order theory DLO (dense linear order without endpoints) has quantifier elimination (`dlo_hasQuantifierElimination`), using the newly formalized quantifier elimination criteria.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Salih Erdem Koçak <saliherdemkd@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
---
[](https://gitpod.io/from-referrer/)
Please note that we have utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are directly "translated" from human-language source material (check the diff in `references.bib`) to Lean proofs using mentioned AI tools. However, all design/formalization decisions are made by us. |
new-contributor
LLM-generated
|
976/7 |
Mathlib.lean,Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/ElementaryExtensionPair.lean,Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/Order.lean,Mathlib/ModelTheory/PartialEquiv.lean,Mathlib/ModelTheory/QuantifierElimination.lean,Mathlib/ModelTheory/Semantics.lean,Mathlib/ModelTheory/Substructures.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean,docs/references.bib |
11 |
6 |
['erdkocak', 'felixpernegger', 'github-actions'] |
nobody |
24-59010 24 days ago |
39-61620 39 days ago |
39-61370 39 days |
| 37819 |
YellPika author:YellPika |
feat(Order/OmegaCompletePartialOrder): add `OmegaCompletePartialOrder` instance for `WithBot` with basic `ωScottContinuous` lemmas |
This is a modification of #34093. See #34093 for details.
---
- [x] depends on: #33941
- [x] depends on: #37258
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
merge-conflict
|
337/10 |
Mathlib/Algebra/Order/Ring/WithTop.lean,Mathlib/Analysis/BoxIntegral/Box/Basic.lean,Mathlib/Order/Monotone/Basic.lean,Mathlib/Order/OmegaCompletePartialOrder.lean,Mathlib/Order/TypeTags.lean,Mathlib/Order/WithBot.lean |
6 |
6 |
['Komyyy', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
24-9063 24 days ago |
82-35950 82 days ago |
22-11204 22 days |
| 37062 |
tannerduve author:tannerduve |
feat(Computability): Turing join and semilattice structure on Turing degrees |
- Add `Partrec.kronecker` (equality test) and `Partrec.join` (disjoint union by parity) in `Partrec.lean`
- Prove `Nat.RecursiveIn` is closed under computable conditionals (`cond_const`, `cond`)
- Show each component reduces to the join (`left_le_join`, `right_le_join`) and the join is the least upper bound (`join_le`)
- Establish `SemilatticeSup` instance on `TuringDegree` |
t-computability
new-contributor
large-import
awaiting-author
|
311/15 |
Mathlib/Computability/Partrec.lean,Mathlib/Computability/RecursiveIn.lean,Mathlib/Computability/TuringDegree.lean |
3 |
18 |
['Komyyy', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'tannerduve'] |
YaelDillies assignee:YaelDillies |
24-8996 24 days ago |
32-32283 32 days ago |
68-28225 68 days |
| 40979 |
thefundamentaltheor3m author:thefundamentaltheor3m |
feat(NumberTheory/ArithmeticFunction/Asymptotics) |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
new-contributor
sphere-packing
awaiting-author
|
37/0 |
Mathlib.lean,Mathlib/NumberTheory/ArithmeticFunction/Asymptotics.lean |
2 |
13 |
['b-mehta', 'github-actions', 'loefflerd', 'thefundamentaltheor3m'] |
loefflerd assignee:loefflerd |
23-21370 23 days ago |
23-21394 23 days ago |
5-27115 5 days |
| 35504 |
JoaBjo author:JoaBjo |
feat(Probability/Distributions/Exponential): add MGF, moments, and memoryless property |
feat(Probability/Distributions/Exponential): add MGF, moments, and memoryless property
Add the main analytic results for the exponential distribution:
- moment-generating function `mgf id (expMeasure r) t = r / (r - t)` for `t < r`
- mean `∫ x, x ∂(expMeasure r) = r⁻¹`
- variance `Var[id; expMeasure r] = r⁻¹ ^ 2`
- `ℒp` membership for all `p`
- tail probability `P(X > x) = exp (-(r * x))`
- memoryless property `P(X > s + t | X > s) = P(X > t)`
The MGF is computed by reducing to the known improper integral `∫ exp(c * x)` on `Ioi`,
and integrability is deduced by contradiction from the positive closed-form value.
The mean and variance are computed via the Gamma function integral
`∫₀^∞ x^(n-1) exp(-r x) dx = Γ(n) / rⁿ`. The memoryless property follows from
the exponential identity `exp(-(r(s+t))) = exp(-rt) * exp(-rs)`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-measure-probability
awaiting-author
large-import
merge-conflict
|
200/0 |
Mathlib/Probability/Distributions/Exponential.lean |
1 |
9 |
['EtienneC30', 'JoaBjo', 'Timeroot', 'github-actions', 'mathlib-merge-conflicts'] |
EtienneC30 assignee:EtienneC30 |
22-70396 22 days ago |
62-1567 62 days ago |
42-10925 42 days |
| 41217 |
Probablism author:Probablism |
feat(SimpleGraph/Matching): add graph-level IsMatching |
Closes #11911.
This adds a graph-level `SimpleGraph.IsMatching` predicate. It is support-based, so isolated
vertices are allowed: every vertex in the graph support is incident to exactly one edge.
The existing `Subgraph.IsMatching` predicate is unchanged. I added compatibility lemmas relating it
to `M.spanningCoe`, including an iff characterizing the subgraph predicate as graph-level matching
plus `M.support = M.verts`.
Validation:
- `lake env lean Mathlib/Combinatorics/SimpleGraph/Matching.lean`
- `lake build Mathlib.Combinatorics.SimpleGraph.Matching`
- `lake build Mathlib.Combinatorics.SimpleGraph.Hall Mathlib.Combinatorics.SimpleGraph.Tutte Mathlib.Combinatorics.SimpleGraph.UniversalVerts`
- `lake exe lint-style Mathlib/Combinatorics/SimpleGraph/Matching.lean`
- `lake build Mathlib`
- `lake test`
AI assistance: OpenAI Codex assisted with testing and validation.
|
t-combinatorics
new-contributor
|
41/3 |
Mathlib/Combinatorics/SimpleGraph/Matching.lean |
1 |
4 |
['Probablism', 'SnirBroshi', 'github-actions'] |
nobody |
21-52243 21 days ago |
21-53432 21 days ago |
21-52896 21 days |
| 36770 |
Xmask19 author:Xmask19 |
feat: invariance of domain via Brouwer's fixed point theorem |
Continuous and injective maps from Rn to Rn are open mappings. This is shown given Brouwer's fixed point theorem. The specific version of Brouwer's theorem assumed is that a continuous map from the closed unit ball to itself has a fixed point. It is used to show a lemma in this proof. Then assuming that invariance of domain isn't true gives a contradiction with this lemma.
---
My supervisor has code for studying topological manifolds which relies on invariance of domain that can be found here: https://github.com/stevensivek/TopologicalManifolds and is planned to be submitted to Mathlib.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
large-import
merge-conflict
|
1587/5 |
Mathlib.lean,Mathlib/Algebra/Polynomial/Roots.lean,Mathlib/AlgebraicTopology/InvarianceOfDomain.lean,Mathlib/Analysis/Convex/GaugeRescale.lean,Mathlib/Topology/Closure.lean,Mathlib/Topology/Order.lean |
6 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
21-48148 21 days ago |
27-64801 27 days ago |
0-7022 1 hour |
| 37299 |
XC0R author:XC0R |
feat(NumberTheory): Chebyshev's lower bound on primorial |
## Summary
Prove `primorial(n) ≥ 2^(n/2)` for all `n ≥ 2` (Chebyshev's 1852 lower bound). This is the lower bound complement to `primorial_le_four_pow`. Addresses the TODO at `Chebyshev.lean` line 50: "Prove Chebyshev's lower bound."
### New file: `Mathlib/NumberTheory/PrimorialLowerBound.lean`
**Main theorems:**
- `two_pow_le_primorial`: `2 ^ n ≤ primorial (2 * n)` for `n ≥ 29`
- `two_pow_div_two_le_primorial`: `2 ^ (n / 2) ≤ primorial n` for `n ≥ 2`
**Key intermediates:**
- `centralBinom_le_pow_mul_primorial`: `C(2n,n) ≤ (2n)^{π(√(2n)+1)} * primorial(2n)`
- `eight_mul_sq_add_le_two_pow`: `8u² + 16u + 8 ≤ 2^u` for `u ≥ 10`
### Proof technique
Central binomial decomposition: from `four_pow_lt_mul_centralBinom` and `factorization_choose_le_log`, bound `C(2n,n)` above by `(2n)^{π(√(2n)+1)} * primorial(2n)`. Rearranging gives `primorial(2n) ≥ 2^n` for `n ≥ 29`. Base cases by `norm_num` + `decide`, large `n` analytically via `√n` factoring.
### AI disclosure
Claude (Anthropic) was used as a coding assistant for Lean tactic exploration, file structuring, and CI debugging. All proof strategy, mathematical content, and final code have been reviewed and are understood by the author. |
t-number-theory
new-contributor
awaiting-author
merge-conflict
|
226/2 |
Mathlib/NumberTheory/Chebyshev.lean,Mathlib/NumberTheory/Primorial.lean |
2 |
54 |
['MichaelStollBayreuth', 'Parcly-Taxel', 'XC0R', 'github-actions', 'mathlib-merge-conflicts', 'wwylele'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
21-48023 21 days ago |
102-70801 102 days ago |
13-62238 13 days |
| 30637 |
strihanje01 author:strihanje01 |
feat(Combinatorics/SetFamily/Lindstrom): Lindstrom's theorem for subfamilies with equal unions |
add Lindstrom's theorem and its strengthening for equal intersections
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
211/0 |
Mathlib.lean,Mathlib/Combinatorics/SetFamily/Lindstrom.lean |
2 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
b-mehta assignee:b-mehta |
21-16182 21 days ago |
21-16777 21 days ago |
52-65737 52 days |
| 40768 |
AlexeyMilovanov author:AlexeyMilovanov |
Add a reachability characterization for PFun.fix |
Add a `ReflTransGen` characterization of `PFun.fix` and use it to simplify one Turing machine proof. |
new-contributor |
27/13 |
Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Data/PFun.lean |
2 |
2 |
['github-actions'] |
nobody |
21-7218 21 days ago |
21-7218 21 days ago |
21-6682 21 days |
| 26923 |
oliver-butterley author:oliver-butterley |
feat(Dynamics/BirkhoffSum): add the pointwise ergodic theorem (Birkhoff's) |
The Pointwise Ergodic Theorem, also known as Birkhoff's Ergodic Theorem.
Co-authored-by: Lua Viana Reis <me@lua.blog.br>
- [x] depends on: #26074
- [x] depends on: #26807
- [x] depends on: #26810
- [x] depends on: #26840
- [x] depends on: #26842
- [x] depends on: #26848
- [x] depends on: #26851
- [x] depends on: #26852
- [x] depends on: #26853
- [x] depends on: #27008
- [x] depends on: #28901
Zulip: [PR thread](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/.2326923.20The.20pointwise.20ergodic.20theorem.20.28Birkhoff's.29/with/527835158)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-dynamics
new-contributor
awaiting-author
|
398/0 |
Mathlib.lean,Mathlib/Dynamics/BirkhoffSum/Pointwise.lean |
2 |
32 |
['D-Thomine', 'github-actions', 'leanprover-community-bot-assistant', 'lua-vr', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'rwst', 'sgouezel', 'urkud'] |
sgouezel assignee:sgouezel |
20-68797 20 days ago |
217-68065 217 days ago |
98-50945 98 days |
| 36698 |
ghseeli author:ghseeli |
feat(Combinatorics/Enumerative): Latin squares |
This PR defines Latin rectangles and Latin squares and proves an extension theorem using Hall's Marriage Theorem.
## Main results
- `group_to_cayley_table`: every finite group `G` yields a `LatinSquare G G`.
- `latin_rectangle_extends_one_row`: a (non-square) `LatinRectangle` extends to a `LatinRectangle`
with one more row. This is an application of **Hall's Marriage Theorem**, `hallMatchingsOn.nonempty`.
- `latin_rectangle_extends_to_latin_square`: a `LatinRectangle` extends to a `LatinSquare`.
This is included in a new file `Combinatorics/Enumerative/LatinSquare.lean`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37190
- [x] depends on: #37720
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
|
646/0 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/DoubleCounting.lean,Mathlib/Combinatorics/Enumerative/LatinSquare.lean,Mathlib/Combinatorics/Pigeonhole.lean,Mathlib/Data/Finset/Card.lean,Mathlib/Data/Fintype/Card.lean,docs/references.bib |
7 |
81 |
['SnirBroshi', 'cjrl', 'eric-wieser', 'ghseeli', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vlad902'] |
nobody |
20-51206 20 days ago |
20-53800 20 days ago |
37-64800 37 days |
| 40835 |
Gracie-z author:Gracie-z |
feat(Probability): add Paley-Zygmund inequality |
Add the Paley-Zygmund inequality: for a nonneg random variable Z with finite variance and 0 ≤ θ ≤ 1,
(1-θ)² E[Z]² ≤ E[Z²] · P(Z > θ E[Z]).
The proof uses Jensen's inequality applied to x² on the set {Z > θ E[Z]}.
AI disclosure: I used Claude Code as a learning aid while writing this proof. It helped me find the right Mathlib lemma names and understand tactic syntax, but I wrote every line of code myself.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
new-contributor
awaiting-author
|
85/0 |
Mathlib.lean,Mathlib/Probability/PaleyZygmund.lean |
2 |
20 |
['CoolRmal', 'Gracie-z', 'SnirBroshi', 'github-actions'] |
EtienneC30 assignee:EtienneC30 |
20-27876 20 days ago |
20-27876 20 days ago |
12-8119 12 days |
| 40224 |
AlexBrodbelt author:AlexBrodbelt |
feat(Tactic/Group): strengthen the group tactic and add tests |
Following the suggestion from Floris Van Doorn, this PR keeps the group tactic as an invocation of a suitable simp-set.
The group tactic is improved to:
Once simplification on the exponents is done, apply left and right cancellation. That is, to normalise expressions like `a * b = a * c` to `b * c`. In particular, an elaborator for traversing the syntax tree to efficiently simplify expressions like:
- `a * b^(-3) = c * b^(-3)` to `a = c` - apply right cancellation
- `a^3 * b = a^2 * c` to `a * b = c` - apply left cancellation and reduce exponent
- `a^7 * b = a^(-3) * c` to `a^10 * b = c` - apply right and increase exponent to being positive
- `a * b^5 = c * b` to `a * b^4 = c` - apply right cancellation and reduce exponent
Apply a post-processing where expression of the form ( · )^(-1) are normalised to use the inversion notation ( · )⁻¹. This allows immediately using lemmas involving inversion which is how most lemmas are stated.
*Limitations*
- It cannot deal with cycling to simplify the expression
`b ^ 17 * c⁻¹ * d * b ^ 3 = 1` to `b^20 * c⁻¹ * d`
and cannot not close
- `(a * b *c)^m * a * b * (c * a * b)^n * c = (a * b * c)^(n + m +1)`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
new-contributor
WIP
|
190/10 |
Mathlib/Tactic/Group.lean,MathlibTest/Tactic/Group.lean |
2 |
4 |
['github-actions', 'grunweg'] |
nobody |
20-7872 20 days ago |
48-1422 48 days ago |
0-601 10 minutes |
| 41241 |
intgrah author:intgrah |
feat(Order/Category): cartesian closed and distributive structure on PartOrd and Preord |
Give `PartOrd` and `Preord` `CartesianMonoidalCategory`, `MonoidalClosed`, and `IsCartesianDistributive` instances.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
|
272/0 |
Mathlib.lean,Mathlib/Order/Category/PartOrd/CartesianClosed.lean,Mathlib/Order/Category/PartOrd/Distributive.lean,Mathlib/Order/Category/Preord/CartesianClosed.lean,Mathlib/Order/Category/Preord/Distributive.lean |
5 |
5 |
['github-actions', 'intgrah'] |
nobody |
19-67041 19 days ago |
21-5219 21 days ago |
21-4683 21 days |
| 29871 |
zach1502 author:zach1502 |
feat(Matrix/Transvection): Gauss pivot determinant identity and pivot preservation |
This PR adds two lemmas formalizing standard Gaussian pivot identities:
* `Matrix.Transvection.listTransvecCol_mul_mul_listTransvecRow_pivot`:
After applying the canonical left/right transvection products that clear the last column and row,
the pivot (bottom-right) entry of a matrix is unchanged.
Marked `@[simp]`.
* `Matrix.Transvection.det_eq_detTopLeft_mul_pivot`:
If the pivot entry is nonzero, then the determinant of the matrix factors as
the determinant of the top-left block times the pivot entry, after performing
the canonical transvections.
This is the usual Gauss–pivot determinant identity.
* Added simple usage tests in `MathlibTest/matrix.lean` to check that the new lemmas
are usable by `simp`/`simpa`.
---
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-algebra
new-contributor
merge-conflict
label:t-algebra$ |
94/0 |
Mathlib/LinearAlgebra/Matrix/Transvection.lean,MathlibTest/matrix.lean |
2 |
4 |
['github-actions', 'mathlib-merge-conflicts', 'riccardobrasca', 'zach1502'] |
nobody |
19-58028 19 days ago |
261-12500 261 days ago |
41-53612 41 days |
| 37716 |
slavanaprienko author:slavanaprienko |
feat(LinearAlgebra/Matrix/Determinant): Desnanot-Jacobi identity |
This PR adds the Desnanot-Jacobi identity (also known as the Lewis Carroll identity or Dodgson condensation): for any (n+2)×(n+2) matrix M over a commutative ring,
$$\det(M) \cdot \det(M_{1,n}^{1,n}) = \det(M_1^1) \cdot \det(M_n^n) - \det(M_1^n) \cdot \det(M_n^1)$$
The proof follows Bressoud's *Proofs and Confirmations* (Cambridge University Press, 1999): multiply M by an auxiliary matrix built from columns of the adjugate, then compare determinants. This yields the identity premultiplied by det(M). To cancel, we pass to a universal polynomial ring (an integral domain with nonzero determinant), then specialize back to arbitrary commutative rings.
It seems there's some interest in adding this:
https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Determinantal.20identity.20and.20the.20Cauchy.20matrix.20determinant/with/582946873
--- |
t-algebra
new-contributor
merge-conflict
label:t-algebra$ |
217/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Matrix/Determinant/DesnanotJacobi.lean |
2 |
14 |
['SnirBroshi', 'github-actions', 'grunweg', 'kim-em', 'mathlib-merge-conflicts', 'slavanaprienko'] |
ocfnash assignee:ocfnash |
19-55954 19 days ago |
19-55955 19 days ago |
53-49476 53 days |
| 40337 |
Robby955 author:Robby955 |
feat(Probability): add condExpKernel prefix support |
## Summary
This draft adds reusable conditional-kernel support for finite product measures and an explicit prefix/tail decomposition for `condExpKernel` on `Fin n -> Ω`.
The main new explicit statement is `ProbabilityTheory.condExpKernel_piPrefix_eq_dirac_prod_pi`: for a product probability measure, conditioning on the prefix-coordinate sigma-algebra gives the kernel that keeps the prefix fixed and samples the remaining coordinates independently from the corresponding tail product.
## Changes
- Add `MeasurableSpace.piPrefixRestrict` and define `MeasurableSpace.piPrefix` as the comap along that restriction map.
- Add prefix measurability helpers for the coordinate sub-sigma-algebra.
- Add `ProbabilityTheory.Kernel.piPrefixTailFromPrefix` and `ProbabilityTheory.Kernel.piPrefixTail` for the explicit prefix-fixed/tail-product kernel.
- Add `ProbabilityTheory.condExpKernel_piPrefix_eq_dirac_prod_pi`, the explicit a.e. kernel equality for product probability measures.
- Keep `ProbabilityTheory.condExpKernel_piPrefix_ae_eq`, the finite-product prefix-coordinate support theorem.
- Extend `MathlibTest/CondExpKernelPiPrefix.lean` with an elaboration check for the explicit kernel equality.
## Verification
Local:
- `lake env lean Mathlib/Probability/Kernel/Condexp.lean`
- `lake env lean MathlibTest/CondExpKernelPiPrefix.lean`
- `lake build Mathlib.Probability.Kernel.Condexp`
- `lake exe runLinter --trace Mathlib.Probability.Kernel.Condexp`
- `#print axioms ProbabilityTheory.condExpKernel_piPrefix_eq_dirac_prod_pi`
- `#print axioms ProbabilityTheory.condExpKernel_piPrefix_ae_eq`
- `git diff --check`
`lake -Kthreads=1 test` was run locally, but this machine hit an OS file-table exhaustion error near the end of `MathlibTest` targets. The GitHub fork CI completed the full build, `test mathlib`, lint, style, cache upload, and post-build checks successfully on the PR head.
Axiom checks report only `[propext, Classical.choice, Quot.sound]` for the two public prefix theorems above.
## Risk / Rollback
No migrations, dependency changes, security-sensitive behavior, or user-facing runtime behavior. Roll back by reverting the prefix-kernel additions in `Mathlib/Probability/Kernel/Condexp.lean` and the corresponding `MathlibTest` checks.
## Disclaimers:
PR and post written by myself, Claude Code and whispr are used in coding and formatting. Claude Code also was used to do a review of the repo. |
t-measure-probability
new-contributor
LLM-generated
|
343/1 |
Mathlib/Probability/Kernel/Condexp.lean,MathlibTest/CondExpKernelPiPrefix.lean |
2 |
3 |
['felixpernegger', 'github-actions'] |
kex-y assignee:kex-y |
19-50608 19 days ago |
43-55496 43 days ago |
43-54960 43 days |
| 37350 |
aditya-ramabadran author:aditya-ramabadran |
feat(Analysis/Distribution): define the map from test functions to Schwartz functions |
Defines the canonical continuous linear map from test functions to Schwartz functions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This PR originally also included the induced map from tempered distributions to distributions,
`𝓢'(E, F) →ₗ[ℂ] 𝓓'(Ω, F)`, via a real-to-complex bridge
`𝓓(Ω, ℝ) →L[ℝ] 𝓢(E, ℂ)`. After feedback from @mcdoll , I removed that second part from this PR so that the `𝓓 → 𝓢` map can be merged separately / later in a follow up PR after we figure out the best way to do it.
**Old description:**
Put in a separate file since Distribution.lean only imports TestFunction right now and I thought it was cleaner to do in a new bridge file with both the maps. Open to changing this though.
* Made use of #36445 (proved first map locally on fixed support spaces first by local seminorm estimates, then used limitCLM)
* Needed a real to complex bridge `TestFunction.ToComplexSchwartzMap` since distributions are defined on real-valued test functions but tempered distributions in mathlib are defined on complex-valued Schwartz functions
* Induced map $\mathcal S'(E,F) \to \mathcal D'(Ω,F)$ is $\mathbb C$-linear
The main important defs are `ContDiffMapSupportedIn.toSchwartzMapCLM` which is the local fixed-support part, then `TestFunction.toSchwartzMapCLM` (where the continuity uses limitCLM to glue the local continuous linear maps on each $\mathcal D_K$), and `TemperedDistribution.toDistributionLM` which is the linear map from tempered distributions to ordinary distributions.
Tested with `lake env lean Mathlib/Analysis/Distribution/TestFunctionSchwartz.lean`
[](https://gitpod.io/from-referrer/)
|
t-analysis
new-contributor
awaiting-author
|
143/0 |
Mathlib.lean,Mathlib/Analysis/Distribution/TestFunctionSchwartz.lean |
2 |
27 |
['aditya-ramabadran', 'github-actions', 'j-loreaux', 'luigi-massacci', 'mcdoll'] |
mcdoll assignee:mcdoll |
19-25372 19 days ago |
19-25372 19 days ago |
80-32218 80 days |
| 39239 |
alainchmt author:alainchmt |
feat(FieldTheory/Finite): irreducible polynomial divides X^q^n - X iff degree divides n |
---
Add the theorem saying that, for an irreducible polynomial `f` over a finite field `K`, the degree of `f` divides `n` if and only if `f` divides `X ^ (Nat.card K) ^ n - X`. Include auxiliary lemmas.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
34/0 |
Mathlib/FieldTheory/Finite/Extension.lean,Mathlib/FieldTheory/Minpoly/Field.lean |
2 |
2 |
['github-actions'] |
mattrobball assignee:mattrobball |
18-50615 18 days ago |
71-18077 71 days ago |
71-17541 71 days |
| 40973 |
certik author:certik |
feat: multiplicative automatic continuity on ℝ |
This PR adds the multiplicative companion of the existing additive automatic-continuity theorem `AddMonoidHom.continuous_of_measurable`. See the git commit descriptions for all the details.
Depends on https://github.com/leanprover-community/mathlib4/pull/40976.
AI usage disclosure: I used Claude Opus 4.8 to create the theorems and proofs in my own Lean project, then extracted them into this PR since I think they are general purpose and would be useful for other people. I iterated on the proofs until they are as simple as I could get them. I am new to Lean, so if something should be reworked, please let me know. Lean is amazing, I was able to use it to prove various theorems and check my derivations. This is my little contribution back to the project. |
t-measure-probability
LLM-generated
new-contributor
|
159/0 |
Mathlib.lean,Mathlib/MeasureTheory/Measure/Haar/AutomaticContinuity.lean |
2 |
10 |
['certik', 'github-actions', 'mathlib-merge-conflicts', 'wwylele'] |
EtienneC30 assignee:EtienneC30 |
18-50613 18 days ago |
25-28140 25 days ago |
27-51301 27 days |
| 41337 |
gotrevor author:gotrevor |
doc(1000-yaml): add Goodstein's theorem and the Kirby–Paris theorem |
Claims two listed-but-unclaimed entries in the 1000+ theorems scoreboard by adding external-formalization pointers (no mathlib declaration; same pattern as Löb's theorem [`Q204884`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L201), the flypitch continuum-hypothesis independence [`Q208416`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L216), and Arrow's impossibility theorem [`Q33481`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L30)).
## Entries
| Wikidata | Theorem | Formalization |
|----------|---------|---------------|
| `Q1149185` | **Goodstein's theorem** — every Goodstein sequence terminates | [`lean-gallery`](https://github.com/gotrevor/lean-gallery/blob/main/LeanGallery/Logic/Goodstein/Statement.lean) (ordinal-descent proof) |
| `Q1149185X` | **Kirby–Paris theorem** — PA does not prove that every Goodstein sequence terminates | [`goodstein-independence`](https://github.com/gotrevor/goodstein-independence/blob/main/src/GoodsteinPA/Statement.lean) |
## Notes
- **`Q1149185X` (Kirby–Paris, 1982)** is built on the [`FormalizedFormalLogic/Foundation`](https://github.com/FormalizedFormalLogic/Foundation) library (the same library that backs the existing Löb's-theorem entry [`Q204884`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L201)), via the Wainer growth-rate route (`Goodstein` outgrows every PA-provably-total function). The headline `peano_not_proves_goodstein` is sorry-free and `#print axioms`-clean — it rests on exactly `[propext, Classical.choice, Quot.sound]`.
- **`Q1149185`** is Goodstein's theorem proper (the termination statement, provable in ZFC / Lean); mathlib does not currently contain it.
- Both formalizations are by Trevor Morris, developed with AI assistance: Claude Code (Fable 5, Opus), Codex, and Harmonic's Aristotle.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
new-contributor
LLM-generated
|
6/0 |
docs/1000.yaml |
1 |
4 |
['felixpernegger', 'github-actions'] |
nobody |
18-47930 18 days ago |
18-50185 18 days ago |
18-49649 18 days |
| 40953 |
ymonbru author:ymonbru |
feat: the definition of a KSheaf on a T2 Space |
This files adds the definition of a KSheaf on a T2 space with value in an arbitrary category.
One may expect this notion to come from sheaves on a site of compact subset of a topological space but there is no coresponding Grothendieck topology on compact subsets. In particular, this is because one of the axioms is in the form of a colimit and can't be expressed as a limit condition (hence a sheaf condition).
It also adds API that allow to use the axioms in a convenient way.
---
- [ ] depends on: #40737
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
133/0 |
Mathlib.lean,Mathlib/Topology/Sheaves/KSheaf.lean |
2 |
9 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'ymonbru'] |
nobody |
18-24429 18 days ago |
18-24429 18 days ago |
18-34628 18 days |
| 41358 |
erdkocak author:erdkocak |
doc(ModelTheory): fix partial equivalence theorem reference |
Fix a stale module doc reference in `ModelTheory.PartialEquiv`: the theorem is `equiv_between_cg`, and the conclusion is an isomorphism `M ≃[L] N`.
---
This documentation-only PR was split out from #41111 following review feedback.
Please note that ChatGPT Codex was used to help prepare this documentation-only PR. |
t-logic
new-contributor
|
3/3 |
Mathlib/ModelTheory/PartialEquiv.lean |
1 |
2 |
['github-actions'] |
nobody |
18-19498 18 days ago |
18-20087 18 days ago |
18-19551 18 days |
| 41111 |
erdkocak author:erdkocak |
feat(ModelTheory): add cardinal-generated substructure API |
This is the first PR in a sequence splitting #40561.
It adds a `CardinalLTGenerated` predicate for substructures, basic closure and map lemmas, and the finitely generated specialization.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Yusuf Demir <yusufdemir12610@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
Please note that we utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are direct translations from human-language source material (see the diff in `references.bib`) into Lean proofs using the mentioned AI tools. However, all design and formalization decisions were made by us. |
t-logic
new-contributor
LLM-generated
|
51/0 |
Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/Substructures.lean |
2 |
9 |
['NoahW314', 'erdkocak', 'felixpernegger', 'github-actions'] |
nobody |
18-18643 18 days ago |
18-19450 18 days ago |
24-16603 24 days |
| 41112 |
erdkocak author:erdkocak |
feat(ModelTheory): add elementary extension pairs |
- [ ] depends on: #41111
- [ ] depends on: #41358
The second dependency is a small documentation-only cleanup split out from the original stack, so that the downstream PRs do not carry that unrelated diff.
This is the second PR in a sequence splitting #40561.
It adds elementary extension-pair predicates and the partial-equivalence API used by the quantifier-elimination criterion.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Yusuf Demir <yusufdemir12610@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
Please note that we utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are direct translations from human-language source material (see the diff in `references.bib`) into Lean proofs using the mentioned AI tools. However, all design and formalization decisions were made by us. |
new-contributor
LLM-generated
blocked-by-other-PR
|
221/4 |
Mathlib.lean,Mathlib/ModelTheory/ElementaryExtensionPair.lean,Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/PartialEquiv.lean,Mathlib/ModelTheory/Substructures.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean |
6 |
4 |
['felixpernegger', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
18-18495 18 days ago |
24-6496 24 days ago |
0-10614 2 hours |
| 41113 |
erdkocak author:erdkocak |
feat(ModelTheory): define quantifier elimination |
- [ ] depends on: #41112
This is the third PR in a sequence splitting #40561.
It defines quantifier-free equivalence over a theory and quantifier elimination, together with basic reduction lemmas.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Yusuf Demir <yusufdemir12610@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
Please note that we utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are direct translations from human-language source material (see the diff in `references.bib`) into Lean proofs using the mentioned AI tools. However, all design and formalization decisions were made by us. |
new-contributor
LLM-generated
blocked-by-other-PR
|
400/4 |
Mathlib.lean,Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/ElementaryExtensionPair.lean,Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/PartialEquiv.lean,Mathlib/ModelTheory/QuantifierElimination.lean,Mathlib/ModelTheory/Substructures.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean,docs/references.bib |
9 |
4 |
['felixpernegger', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
18-18256 18 days ago |
24-6498 24 days ago |
0-10570 2 hours |
| 41114 |
erdkocak author:erdkocak |
feat(ModelTheory): add embedding criteria for quantifier elimination |
- [ ] depends on: #41113
This is the fourth PR in a sequence splitting #40561.
It adds embedding and realization criteria for quantifier elimination, including the Marker-style criterion.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Yusuf Demir <yusufdemir12610@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
Please note that we utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are direct translations from human-language source material (see the diff in `references.bib`) into Lean proofs using the mentioned AI tools. However, all design and formalization decisions were made by us. |
new-contributor
LLM-generated
blocked-by-other-PR
|
771/4 |
Mathlib.lean,Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/ElementaryExtensionPair.lean,Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/PartialEquiv.lean,Mathlib/ModelTheory/QuantifierElimination.lean,Mathlib/ModelTheory/Semantics.lean,Mathlib/ModelTheory/Substructures.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean,docs/references.bib |
10 |
4 |
['felixpernegger', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
18-18185 18 days ago |
24-6499 24 days ago |
0-10598 2 hours |
| 41115 |
erdkocak author:erdkocak |
feat(ModelTheory): derive quantifier elimination from extension pairs |
- [ ] depends on: #41114
This is the fifth PR in a sequence splitting #40561.
It proves quantifier elimination from elementary extension-pair hypotheses, including finitely generated and cardinal-generated variants.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Yusuf Demir <yusufdemir12610@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
Please note that we utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are direct translations from human-language source material (see the diff in `references.bib`) into Lean proofs using the mentioned AI tools. However, all design and formalization decisions were made by us. |
new-contributor
LLM-generated
blocked-by-other-PR
|
955/4 |
Mathlib.lean,Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/ElementaryExtensionPair.lean,Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/PartialEquiv.lean,Mathlib/ModelTheory/QuantifierElimination.lean,Mathlib/ModelTheory/Semantics.lean,Mathlib/ModelTheory/Substructures.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean,docs/references.bib |
10 |
4 |
['felixpernegger', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
18-18009 18 days ago |
24-6500 24 days ago |
0-10557 2 hours |
| 41116 |
erdkocak author:erdkocak |
feat(ModelTheory): prove quantifier elimination for dense linear orders |
- [ ] depends on: #41115
This is the final PR in a sequence splitting #40561.
It applies the extension-pair criterion to prove that dense linear orders have quantifier elimination.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Yusuf Demir <yusufdemir12610@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
Please note that we utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are direct translations from human-language source material (see the diff in `references.bib`) into Lean proofs using the mentioned AI tools. However, all design and formalization decisions were made by us. |
new-contributor
LLM-generated
blocked-by-other-PR
|
972/5 |
Mathlib.lean,Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/ElementaryExtensionPair.lean,Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/Order.lean,Mathlib/ModelTheory/PartialEquiv.lean,Mathlib/ModelTheory/QuantifierElimination.lean,Mathlib/ModelTheory/Semantics.lean,Mathlib/ModelTheory/Substructures.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean,docs/references.bib |
11 |
5 |
['felixpernegger', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
18-17931 18 days ago |
24-6501 24 days ago |
0-10546 2 hours |
| 38014 |
cduenasnavarro author:cduenasnavarro |
feat(InformationTheory): linear codes over finite fields and minimum distance properties |
Define linear codes over a finite field `F` as finite-dimensional subspaces of `Fin n → F`,
together with their minimum Hamming distance.
Main definitions:
* `LinearCode`
* `minDist`
* `LinearCodeWithDist`
* `hammingSphere`
Main results:
* `minDist_eq_sInf_pairwiseDist`: characterisation of the minimum distance via pairwise distances
* `disjoint_spheres`: Hamming spheres of radius `t` around distinct codewords are disjoint
if `2 * t < d`
Pending:
* Choosing an adequate book reference
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
new-contributor
awaiting-author
|
179/0 |
Mathlib.lean,Mathlib/InformationTheory/Coding/LinearCode.lean |
2 |
50 |
['SnirBroshi', 'YaelDillies', 'cduenasnavarro', 'github-actions', 'rkirov', 'vihdzp', 'wrenna-robson', 'wwylele'] |
YaelDillies assignee:YaelDillies |
17-80308 17 days ago |
38-20988 38 days ago |
61-47429 61 days |
| 39864 |
8e7 author:8e7 |
feat(Combinatorics/SimpleGraph/Acyclic): helly property on subtrees |
This PR adds several lemmas regarding connected subsets of vertices in trees (subtrees). The main result is the Helly property for subtrees: For a finite set of subtrees, if any pair of subtrees intersect, then there is a common vertex in all subtrees.
This lemma is part of an effort to formalize tree decompositions (see #38334), and will be used in a future PR to prove `G.cliqueNum - 1 <= G.treeWidth`.
AI Usage: The proofs were developed with the help of Claude Code. I vouch for all the code written and understand the content fully.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
|
114/0 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean |
2 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
17-39664 17 days ago |
17-40219 17 days ago |
35-53856 35 days |
| 40728 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Hasse): more properties of Hasse graphs of linear orders |
- two forms of an intermediate value theorem for linear orders
- the Hasse graph of a linear order is acyclic
- a path graph is locally finite
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
large-import
|
97/24 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/CycleGraph.lean,Mathlib/Combinatorics/SimpleGraph/Hasse.lean,Mathlib/Data/Fintype/Defs.lean |
4 |
18 |
['Formalistic03', 'SnirBroshi', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
15-68464 15 days ago |
15-71586 15 days ago |
29-51014 29 days |
| 39722 |
kg583 author:kg583 |
feat(Combinatorics): link `Nat.Partition` to `YoungDiagram` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
AI disclosure: Claude was used to source some proof sketches.
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
large-import
|
111/4 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Partition/Basic.lean,Mathlib/Combinatorics/Enumerative/Partition/YoungDiagram.lean,Mathlib/Combinatorics/Young/YoungDiagram.lean |
4 |
48 |
['NoahW314', 'YaelDillies', 'github-actions', 'kg583', 'wwylele'] |
YaelDillies assignee:YaelDillies |
15-66295 15 days ago |
15-66295 15 days ago |
50-60676 50 days |
| 37683 |
SabrinaJewson author:SabrinaJewson |
feat(Order/OrdContinuous): every map between complete lattices that preserves sSup is a left adjoint of some Galois connection |
It is already proven that the left side of a Galois connection is left-continuous; this provides the converse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #37682
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
|
14/0 |
Mathlib/Order/OrdContinuous.lean |
1 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
15-64676 15 days ago |
15-66343 15 days ago |
15-67254 15 days |
| 40582 |
dennj author:dennj |
feat(Analysis): the one-sided Laplace transform |
Introducing Laplace transform `ℒ(f)(s) = ∫ t in Ioi 0, exp (-s * t) • f t`
It is needed in physlib
I modelled the file following Mellin transform.
## Main definitions
* `LaplaceConvergent f s`: the Laplace integral is well-defined at `s`.
* `laplace f s`: the Laplace transform, a total function
* `HasLaplace f s m`: convergence together with the value `m`.
## Main results
* Linearity: `laplace_add`/`sub`/`const_smul`/`neg`/`zero`/`div_const`, at the `laplace`, `LaplaceConvergent`, and `HasLaplace` levels.
* `laplaceConvergent_iff_norm`, `norm_laplace_le_integral_norm`: reduction of convergence and norm bounds to the real exponential weight.
* `laplaceConvergent_of_isBigO_exp`: existence for functions of exponential order, on the appropriate right half-plane.
* `LaplaceConvergent.of_re_le`/`of_re_lt`: monotonicity of convergence in `s.re` (the half-plane structure).
* `laplace_cexp_smul`: the frequency-shift rule.
* `laplace_indicator_comp_sub`: the time-shift rule.
* `laplace_comp_mul_left`/`right`: behaviour under positive dilation.
* `hasLaplace_const`/`hasLaplace_one`/`hasLaplace_cexp`: basic transform values.
Human made PR |
t-measure-probability
new-contributor
|
571/1 |
Mathlib.lean,Mathlib/Analysis/LaplaceTransform.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/AEStronglyMeasurable.lean,Mathlib/MeasureTheory/Group/Measure.lean,Mathlib/MeasureTheory/Integral/ExpDecay.lean |
5 |
3 |
['github-actions'] |
CoolRmal assignee:CoolRmal |
15-50605 15 days ago |
38-36470 38 days ago |
38-43790 38 days |
| 40984 |
jujumumu author:jujumumu |
feat(Algebra/Homology): add A-infinity grading data |
This is the first PR in a series of PRs that are aimed at defining AInfinityCategories in Lean.
This initial PR defines the necessary grading definitions and RLinearGradedQuiver, which is the first step to defining what an AInfinityCategory is.
We have a general roadmap that looks like Graded Quivers -> AinfinityCategoryStruct -> AInfinityCategory just like how Mathlib has Quiver -> CategoryStruct -> Category.
I've been chatting with a few people on [zulip](https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/A-Infinity.20Categories) regarding this project.
More information can be found at this website: https://marcodavid.net/ainfinity/. We have done a lot of work on defining AInfinityCategories and functors and some basic properties of them. The most recent code can be found [here](https://github.com/marco-david/ainfinity-lean/tree/AInfinityCategories).
AI Usage: GPT 5.5 was used in the overall development of this project. But all of the lean code in this first commit was written by humans. We intend for all PRs to be written by humans.
|
t-algebra
new-contributor
t-category-theory
awaiting-author
label:t-algebra$ |
81/0 |
Mathlib.lean,Mathlib/Algebra/Homology/AInfinity/Grading.lean |
2 |
4 |
['github-actions', 'joelriou'] |
nobody |
15-22851 15 days ago |
15-22851 15 days ago |
13-19575 13 days |
| 41444 |
gmcninch-prof author:gmcninch-prof |
Prove the universal property of SymmetricPower (lift) |
Provide the universal property / `lift` for `SymmetricPower`, namely that
linear maps from `Sym[R]^n M` to `N` correspond to symmetric multilinear
maps `M ^ n` to `N`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #41426
The main result is [`lift`](https://github.com/gmcninch-prof/mathlib4/blob/symmetric-power-lift-ump/Mathlib/LinearAlgebra/TensorPower/Symmetric.lean#L114).
**Note on approach**: this PR builds `SymmetricPower` on top of a `ModuleCon`
(a congruence relation respecting both addition and scalar multiplication),
rather than the plain `addConGen`-based quotient currently on master, since
this streamlines the proof of the universal property. The generic
congruence-relation machinery this needs --
[`moduleConGen`/`ModuleConGen.Rel`](https://github.com/gmcninch-prof/mathlib4/blob/symmetric-power-lift-ump/Mathlib/Algebra/Module/Congruence/Defs.lean#L77-L98)
and
[`ModuleCon.lift`/`.mk'`/`.eq`/`.lift_mk'`/`.mk'_surjective`](https://github.com/gmcninch-prof/mathlib4/blob/symmetric-power-lift-ump/Mathlib/Algebra/Module/Congruence/Defs.lean#L159-L194)
-- isn't specific to symmetric powers, so it lives in
`Mathlib.Algebra.Module.Congruence.Defs` alongside the existing `ModuleCon`
API there, rather than inline in `Symmetric.lean`. Since this does replace the
current definition of `SymmetricPower`/`Sym[R] ι M`, reviewers should note
it's not purely additive over what's on master.
This was one of the items in the `ToDo` in
[`Mathlib/LinearAlgebra/TensorPower/Symmetric.lean`](https://github.com/gmcninch-prof/mathlib4/blob/symmetric-power-lift-ump/Mathlib/LinearAlgebra/TensorPower/Symmetric.lean#L28)
(namely, the universal property). I hope to address the remaining items in
that list soon (grading, relation with multivariate polynomials).
This PR builds on #41426 (`SymmetricMap`), which should be reviewed/merged
first.
Zulip discussion [here](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/SymmetricPower.20universal.20property/near/608532652)
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
blocked-by-other-PR
label:t-algebra$ |
571/48 |
Mathlib.lean,Mathlib/Algebra/Module/Congruence/Defs.lean,Mathlib/LinearAlgebra/TensorPower/Symmetric.lean,Mathlib/LinearAlgebra/TensorProduct/SymmetricMap.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
14-84365 14 days ago |
unknown |
0-0 0 seconds |
| 41069 |
ymonbru author:ymonbru |
feat: adds the definition of the pushforward of a Ksheaf |
For f: X to Y a proper map between T2 spaces and Y being locally comapct, this files adds the pushforward of KSheaves: in particular one gets a functor from Ksheaf A X to Ksheaf A Y.
In order to prove this lemma, we add the fact that the base changes of compact neighbourhoods of K to f^-1(K) is an initial functor.
This require to know that if f is closed then kernImage f (the adjoint of the preimage) is Open. (Note that if f is open then kernImage f is closed, we thus add this lemma even though we do not use it there).
We also add the ddefinition of the pushforward of a bicartesian square in order to define the pushforward.
Maybe the `properPreimage`in l.101 of BasechngeNhds should go elsewhere but find_home told me to let it there.
---
- [ ] depends on: #40953
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
blocked-by-other-PR
|
272/2 |
Mathlib.lean,Mathlib/Order/CompleteLattice/MulticoequalizerDiagram.lean,Mathlib/Topology/Basic.lean,Mathlib/Topology/Sets/BaseChangeNhds.lean,Mathlib/Topology/Sets/Compacts.lean,Mathlib/Topology/Sheaves/KSheaf.lean |
6 |
4 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
14-83756 14 days ago |
26-17520 26 days ago |
0-2162 36 minutes |
| 41449 |
EzequielS2 author:EzequielS2 |
feat(Topology/ContinuousMap): domMulAct action on C(X, Y) |
## Summary
- Define the action of `Mᵈᵐᵃ` on `C(α, β)` when `M` acts continuously on `α`.
- Add `SMul`, `MulAction`, `SMulCommClass`, and `ContinuousSMul` instances.
- Closes #5379.
## Test plan
- [x] `lake build Mathlib.Topology.ContinuousMap.DomAct`
- [x] `lake exe runLinter Mathlib.Topology.ContinuousMap.DomAct`
|
t-topology
new-contributor
|
101/0 |
Mathlib.lean,Mathlib/Topology/ContinuousMap/DomAct.lean |
2 |
3 |
['github-actions'] |
nobody |
14-79823 14 days ago |
14-80528 14 days ago |
14-79992 14 days |
| 41454 |
EzequielS2 author:EzequielS2 |
feat(Topology/ContinuousMap): domMulAct action on bounded continuous maps |
## Summary
- Define the action of `Mᵈᵐᵃ` on bounded continuous functions `α →ᵇ β`.
- Add basic instances and simp lemmas.
## Dependency
Depends on #41449. I will rebase onto `master` after that PR merges.
## Test plan
- [x] `lake build Mathlib.Topology.ContinuousMap.Bounded.DomAct`
- [x] `lake exe runLinter Mathlib.Topology.ContinuousMap.Bounded.DomAct`
|
new-contributor
t-topology
|
184/0 |
Mathlib.lean,Mathlib/Topology/ContinuousMap/Bounded/DomAct.lean,Mathlib/Topology/ContinuousMap/DomAct.lean |
3 |
2 |
['github-actions'] |
nobody |
14-75305 14 days ago |
14-77512 14 days ago |
14-76976 14 days |
| 40237 |
syedjafri06193 author:syedjafri06193 |
fix(scripts): add_deprecations.sh generates additive aliases for @[to_additive] decls |
Fixes #38550
When a renamed declaration is preceded by `@[to_additive]`, the script
previously only emitted a deprecation alias for the multiplicative name.
This PR also emits one for the additive counterpart.
**Changes:**
- Switch `git diff` to `--unified=1` so the unchanged `@[to_additive]`
attribute appears as a context line in the diff output
- Track that context line in awk; when detected, apply standard
mul→add word substitutions to derive additive old/new names and
emit a second `@[deprecated] alias`
**Example — before:**
@[deprecated (since := "2026-06-04")] alias foo_mul := bar_mul
**Example — after:**
@[deprecated (since := "2026-06-04")] alias foo_mul := bar_mul
@[deprecated (since := "2026-06-04")] alias foo_add := bar_add
---
- [ ] depends on: #40503
AI disclosure: this fix was developed with Claude (claude.ai).
I understand all the changes and can explain every design decision. |
new-contributor
CI
awaiting-author
LLM-generated
|
58/4 |
scripts/add_deprecations.sh |
1 |
10 |
['CoolRmal', 'SnirBroshi', 'adomani', 'github-actions', 'grunweg', 'mathlib-dependent-issues', 'syedjafri06193'] |
nobody |
14-69152 14 days ago |
47-70955 47 days ago |
0-2329 38 minutes |
| 41459 |
EzequielS2 author:EzequielS2 |
feat(Algebra/Group): mulOpposite equivs for submonoid and subgroup |
## Summary
Add MulOpposite monoid equivalences for submonoids and subgroups, and remove the corresponding TODOs in `Subsemiring/MulOpposite.lean`.
## Test plan
- [x] `lake build` and `lake exe runLinter` on `Mathlib.Algebra.Group.Submonoid.MulOpposite` and `Mathlib.Algebra.Group.Subgroup.MulOpposite`
|
t-algebra
new-contributor
label:t-algebra$ |
78/4 |
Mathlib/Algebra/Group/Subgroup/MulOpposite.lean,Mathlib/Algebra/Group/Submonoid/MulOpposite.lean,Mathlib/Algebra/Ring/Subsemiring/MulOpposite.lean |
3 |
9 |
['EzequielS2', 'github-actions', 'wwylele'] |
nobody |
14-49960 14 days ago |
14-74130 14 days ago |
14-73594 14 days |
| 41466 |
EzequielS2 author:EzequielS2 |
feat(Algebra/Order): stronger sublist product inequality via diff |
## Summary
Add `Sublist.prod_le_prod'_of_mem_diff` and `Sublist.sum_le_sum_of_mem_diff`.
## Test plan
- [x] `lake build` and `lake exe runLinter` on `Mathlib.Algebra.Order.BigOperators.Group.List`
|
t-algebra
new-contributor
label:t-algebra$ |
13/4 |
Mathlib/Algebra/Order/BigOperators/Group/List.lean |
1 |
6 |
['EzequielS2', 'github-actions', 'wwylele'] |
nobody |
14-48773 14 days ago |
14-68502 14 days ago |
14-67966 14 days |
| 38334 |
8e7 author:8e7 |
feat(Combinatorics/SimpleGraph/TreeDecomp): define tree decompositions |
Add definition for tree decompositions on simple graphs. Define the tree width of a simple graph and prove basic statements and conversions.
```lean
structure TreeDecomp (G : SimpleGraph V) where
/-- The type of bags in the tree. -/
W : Type
/-- The set of vertices in each bag. -/
bag : W → Finset V
/-- The graph adjacency relation of bags. -/
tree : SimpleGraph W
/-- T must be a tree. -/
isTree : IsTree tree
/-- All vertices in G must appear in some bag. -/
vertexCover : ∀ v : V, ∃ w : W, v ∈ bag w
/-- For any edge (u, v) in G, there is a bag containing both u and v. -/
edgeCover ⦃u v : V⦄ : G.Adj u v → ∃ w : W, u ∈ bag w ∧ v ∈ bag w
/-- For any vertex v in G, the set of bags that contain v is preconnected. -/
connectedBags : ∀ v : V, (tree.induce ({w | v ∈ bag w})).Preconnected
```
AI Usage: Some proofs are written with the help of Claude Code, and everything has been manually reviewed.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #38027
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
LLM-generated
awaiting-author
|
394/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/TreeDecomp.lean |
2 |
40 |
['8e7', 'YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
YaelDillies assignee:YaelDillies |
14-14285 14 days ago |
14-14285 14 days ago |
23-69735 23 days |
| 38527 |
archiebrowne author:archiebrowne |
feat(Analysis/Calculus): continuously differentiable actions |
define the class `ContDiffSMul 𝕜 M X n` which asserts that the map `(c, x) ↦ c • x` is `n` times continuously differentiable on `M × X`.
Many of the results are the C^n analogues of those in the module Mathlib.Topology.Algebra.MulAction.
|
t-differential-geometry
new-contributor
|
317/24 |
Mathlib.lean,Mathlib/Analysis/Calculus/BumpFunction/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Operations.lean,Mathlib/Analysis/Calculus/IteratedDeriv/Lemmas.lean,Mathlib/Analysis/ContDiffMulAction.lean,Mathlib/Analysis/InnerProductSpace/Calculus.lean |
6 |
11 |
['archiebrowne', 'github-actions', 'grunweg', 'peabrainiac'] |
fpvandoorn assignee:fpvandoorn |
14-5608 14 days ago |
14-5524 14 days ago |
69-45955 69 days |
| 36813 |
AlexeyMilovanov author:AlexeyMilovanov |
feat(Computability.Encoding): add self-delimiting unary and pair encodings |
Adds self-delimiting boolean encodings to `Mathlib.Computability.Encoding`.
**Key changes:**
* **`unaryPrefixEncodingNat`**: A self-delimiting unary `Encoding ℕ Bool`, using the code $1^n0$.
* **`encodingProdBool`**: Builds an `Encoding (α × β) Bool` from boolean encodings of `α` and `β`, by prefixing the length of the first encoded component.
* **`encodingListBool`**: Builds an `Encoding (List α) Bool` from a boolean encoding of `α`, using self-delimiting element encodings.
* **`UnaryPrefix` helpers**: Internal-style helper API for the underlying length-prefixed boolean-list encoding and decoding. |
t-computability
new-contributor
|
98/0 |
Mathlib/Computability/Encoding.lean |
1 |
6 |
['AlexeyMilovanov', 'Komyyy', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
13-82534 13 days ago |
13-82534 13 days ago |
30-37875 30 days |
| 35735 |
mkaratarakis author:mkaratarakis |
feat(NumberTheory): analytical properties and lower bounds for Gelfond-Schneider auxiliary function |
This PR is the third component in the formalization of the Gelfond-Schneider Theorem (Hilbert's Seventh Problem). It connects the algebraically constructed auxiliary function `R(x)` to its analytical properties, establishing the exact order of vanishing and the fundamental lower bound on the norm of its non-zero derivative evaluation.
Following the argument in Loo-Keng Hua's *Introduction to Number Theory* (Chapter 17.9, equations (4) and (5)), we define the minimal non-vanishing derivative order $r$ and scale the evaluation to an algebraic integer to compute its norm.
1. (`iteratedkDeriv_R_eq_zero` & `order_geq_n`): We verify that the coefficient vector $\eta$ (chosen via Siegel's lemma in the previous PR) forces the first $n$ derivatives of the auxiliary function $R(x)$ to vanish at the points $x \in \{1, 2, \dots, m\}$. Consequently, the analytical order of $R(x)$ at these points is at least $n$.
2. We extract $r$, the exact minimal order of vanishing of $R(x)$ among all points $1 \le l \le m$, and prove that $n \le r$.
3. We define the non-zero algebraic number $\rho = (\log \alpha)^{-r} R^{(r)}(l_0)$.
4. We prove the crucial textbook step that scaling $\rho$ by $c_1^{r+2mq}$ (formalized here as `cρ`) results in an algebraic integer in $\mathcal{O}_K$.
5. Because $c_1^{r+2mq} \rho$ is a non-zero algebraic integer, the absolute value of its norm is at least $1$. We use this to formally prove the strict lower bound on the absolute norm of the unscaled $\rho$: $|N(\rho)| > c_1^{-h(r+2mq)} > c_5^{-r}$.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #35734 [optional extra text]
[](https://gitpod.io/from-referrer/)
|
t-number-theory
new-contributor
merge-conflict
|
1106/48 |
Mathlib.lean,Mathlib/NumberTheory/NumberField/House.lean,Mathlib/NumberTheory/Transcendental/GelfondSchneider/MainAlg.lean,Mathlib/NumberTheory/Transcendental/GelfondSchneider/MainOrder.lean,Mathlib/RingTheory/Algebraic/NatDenominator.lean |
5 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
13-72286 13 days ago |
147-66477 147 days ago |
0-479 7 minutes |
| 40241 |
AydenLamp author:AydenLamp |
feat(Algebra/Group): add ppow_succ lemmas and idempotent power results for finite semigroups |
Add two successor lemmas to `PNatPowAssoc`:
- `ppow_succ`: `x ^ (n + 1) = x ^ n * x`
- `ppow_succ'`: `x ^ (n + 1) = x * x ^ n`
Add `SemigroupIdempotentPow` with results on idempotent elements in finite semigroups and monoids:
- `Semigroup.exists_idempotent_ppow`: in a finite semigroup, every element has an idempotent positive power
- `Monoid.exists_idempotent_pow`: in a finite monoid, every element has a nonzero idempotent power
- `Monoid.exists_pow_sandwich_eq_self`: in a finite monoid, if `a = x * a * y`, then there exist positive powers `n₁` and `n₂` such that `x ^ n₁ * a = a` and `a * y ^ n₂ = a`
Co-authored-by: Howard Straubing <howard.straubing@bc.edu>
Co-authored-by: Soleil Repple <repple@bc.edu>
Co-authored-by: Nathan Hart-Hodgson <harthodg@bc.edu>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
awaiting-author
label:t-algebra$ |
157/2 |
Mathlib.lean,Mathlib/Algebra/Group/PNatPowAssoc.lean,Mathlib/Algebra/Group/SemigroupIdempotentPow.lean |
3 |
12 |
['faenuccio', 'github-actions'] |
faenuccio and mattrobball assignee:faenuccio assignee:mattrobball |
13-58591 13 days ago |
13-58800 13 days ago |
34-8152 34 days |
| 39406 |
roos-j author:roos-j |
feat(Analysis): van der Corput's lemma |
Adds van der Corput's lemma on one-dimensional oscillatory integrals, a standard tool in harmonic analysis.
Co-authored-by: Manasa Praveen <Manasa_Praveen@student.uml.edu>
---
From https://github.com/roos-j/lean-oscillatory, see there for future plans
Zulip discussion [#mathlib4 > Oscillatory integrals in Lean](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Oscillatory.20integrals.20in.20Lean/with/584786060)
AI disclosure: The code in this PR was human-written. At some point there were attempts to shorten proofs using AI, but those have since been largely overwritten. Currently there is no significant AI-contributed code.
(Edited 6/18/26) |
t-analysis
new-contributor
awaiting-author
|
523/0 |
Mathlib.lean,Mathlib/Analysis/Complex/Trigonometric.lean,Mathlib/Analysis/OscillatoryIntegrals/VanDerCorput.lean,Mathlib/Topology/Order/IntermediateValue.lean,docs/references.bib |
5 |
69 |
['github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'mathlib-triage', 'roos-j', 'sgouezel'] |
j-loreaux assignee:j-loreaux |
13-53939 13 days ago |
14-7280 14 days ago |
49-34758 49 days |
| 24333 |
xcloudyunx author:xcloudyunx |
feat(Combinatorics/SimpleGraph): cycle graph implementation for generic vertex types |
The existing `cycleGraph` implementation under Combinatorics/SimpleGraph/Circulant.lean only operates over `Fin n`. This PR implements a cycle graph implementation over any generic vertex type.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-combinatorics
new-contributor
|
187/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Cycle.lean |
2 |
43 |
['IvanRenison', 'SnirBroshi', 'github-actions', 'mathlib4-merge-conflict-bot', 'vlad902'] |
kmill assignee:kmill |
13-28558 13 days ago |
331-24090 331 days ago |
123-18878 123 days |
| 40904 |
jiangf13 author:jiangf13 |
chore(Algebra/Group/WithOne): remove stale TODO |
The TODO claimed that `WithOne.coe_mul` and `WithZero.coe_mul` have inconsistent implicit parameters. Their current signatures are both of the form `{α} [Mul α] (a b : α)`, so the TODO is stale.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
0/4 |
Mathlib/Algebra/Group/WithOne/Defs.lean |
1 |
2 |
['Multramate', 'github-actions'] |
nobody |
13-20333 13 days ago |
29-82901 29 days ago |
29-82365 29 days |
| 41499 |
qdiazblanco author:qdiazblanco |
feat(NumberTheory): add bernoulli'_five, bernoulli'_six and riemannZeta_six |
Add bernoulli'_five and bernoulli'_six as simp lemmas, continuing the
existing sequence of explicit values bernoulli'_zero through
bernoulli'_four, and use the latter to prove `riemannZeta 6 = π ^ 6 / 945`.
Along the way, golf the proofs of `bernoulli'_two`, `bernoulli'_three` and
`bernoulli'_four` .
These results are upstreamed from the FLT project (ImperialCollegeLondon/FLT#1069).
Co-authored-by: William Coram
Co-authored-by: Samuel Yin
Co-authored-by: Pepa Montero
Co-authored-by: Archie Browne
---
Original PR by William Coram and Samuel Yin, written with the assistance of Claude and
cleaned up by Codex and then by Pepa Montero).
I have done some further changes to fit Mathlib conventions and Claude was also used to help shorten the
proof of `riemannZeta_six` with an idea by Archie Browne.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
LLM-generated
FLT
new-contributor
awaiting-author
|
18/4 |
Mathlib/NumberTheory/Bernoulli.lean,Mathlib/NumberTheory/LSeries/HurwitzZetaValues.lean |
2 |
5 |
['github-actions', 'grunweg', 'qdiazblanco'] |
nobody |
12-86187 12 days ago |
13-81875 13 days ago |
0-3903 1 hour |
| 41537 |
Mathias-Stout author:Mathias-Stout |
feat(RingTheory/TwoSidedIdeal/Lattice): add lemmas on two-sided ideals |
We add three lemmas on two-sided ideals.
These are analogues of existing lemmas of `Submodule` with the same names.
This prepares a follow-up PR proving that quaternions are central simple.
Co-authored-by: Justus Springer [justusspringer@gmx.de](mailto:justusspringer@gmx.de)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
|
13/0 |
Mathlib/RingTheory/TwoSidedIdeal/Lattice.lean |
1 |
5 |
['Whysoserioushah', 'github-actions', 'kbuzzard'] |
nobody |
12-76865 12 days ago |
12-79308 12 days ago |
13-149 13 days |
| 41523 |
Harmenszoon author:Harmenszoon |
feat(Analysis/SpecialFunctions): add the Chase-Lovett diagonal reduction for binEntropy |
This PR adds the two-variable entropy inequality of Chase and Lovett ([arXiv:2211.11689](https://arxiv.org/abs/2211.11689), Lemma 2.2): for `x, y ∈ [0, 1]`,
```
x * binEntropy y + y * binEntropy x ≤ 2 * sqrt (x * y) * binEntropy (sqrt (x * y))
```
in a new leaf file `Mathlib/Analysis/SpecialFunctions/BinaryEntropy/Diagonal.lean`, together with its `negMulLog (1 - ·)` half (`Real.mul_negMulLog_one_sub_add_le`) and a `private` concavity layer for the comparison function `η u = exp u * negMulLog (1 - exp (-u))`. Two entries are added to `docs/references.bib` (Chase–Lovett arXiv:2211.11689, Boppana arXiv:2301.09664).
**Motivation.** This inequality is the reusable reduction step behind the recent entropic lower bounds for Frankl's union-closed sets conjecture (Gilmer; Alweiss–Huang–Sellke; Chase–Lovett; Sawin; Boppana): it reduces two-variable inequalities of Boppana type `K * (x * h y + y * h x) ≤ h (x * y)` to one-variable inequalities `2 * K * t * h t ≤ h (t ^ 2)`. `Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean` currently contains calculus basics for `binEntropy` only, and no inequality of this family; I checked current master for collisions before opening this. A kernel-checked downstream application — a complete Lean formalization of the union-closed lower bound at the constant `(3 - √5)/2` that uses exactly this reduction — is public at https://github.com/demonstrandum-research/artifacts (the `UCFrankl` development), which I maintain.
**Proof shape** (one page of calculus): substituting `x = exp (-u)`, the inequality becomes midpoint concavity of `η` on `[0, ∞)`; the `negMulLog (x * y)` parts of the two sides cancel exactly, the `negMulLog (1 - ·)` parts transfer to `η` via the identity `x * η (-log x) = negMulLog (1 - x)`, and `η'' ≤ 0` reduces to `log t ≤ t - 1`. Stating `η` through `negMulLog` absorbs the `0 * log 0` boundary behaviour, so no separate edge-case argument is needed at `x = 1`.
**Design notes / open questions for reviewers.**
- Hypotheses are stated as `0 ≤ x`/`x ≤ 1` pairs rather than `x ∈ Set.Icc 0 1`; happy to convert if the membership form is preferred.
- The `η`-machinery is `private`; it could be exposed if judged independently useful.
- File placement: a new `BinaryEntropy/Diagonal.lean` leaf keeps the import footprint of `BinaryEntropy.lean` unchanged (the proof needs `Analysis.Convex.Deriv`); merging into the main file is also possible if preferred.
- Naming: `mul_binEntropy_add_mul_binEntropy_le` / `mul_negMulLog_one_sub_add_le` follow the conclusion-based convention but I am glad to rename.
**AI disclosure** (per the [mathlib AI policy](https://leanprover-community.github.io/contribute/index.html)): the Lean code in this PR was generated by LLM agents (Anthropic's Claude, running in an agent pipeline that I operate under the name Demonstrandum), and was then compile-verified against mathlib and reviewed by me. This PR description was also prepared with AI assistance and reviewed by me. The proof is elementary calculus as summarized above; I understand it and take full responsibility for the contribution. I am adding the `LLM-generated` label as required. The downstream `UCFrankl` development linked above (kernel-checked, axioms `[propext, Classical.choice, Quot.sound]` only) is the evidence that the lemma carries real weight in applications.
---
- [x] depends on: nothing
|
t-analysis
LLM-generated
new-contributor
|
227/0 |
Mathlib.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy/Diagonal.lean,docs/references.bib |
3 |
5 |
['Harmenszoon', 'Timeroot', 'github-actions'] |
nobody |
12-69775 12 days ago |
13-38515 13 days ago |
13-37979 13 days |
| 40448 |
ChiCubed author:ChiCubed |
feat(LinearAlgebra/Dimension): tower law for algebraic extensions |
We generalise the tower law for `Module.rank` to the situation of a module over an algebraic extension of domains.
---
See [the Zulip thread](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Tower.20law.20for.20.60Module.2Erank.60/) for some associated discussion.
I am not sure about in which file these results should live, or what their names should be. For the file I have gone with `LinearAlgebra/Dimension/Algebraic.lean` for now, because these feel more like dimension theorems than `Algebra.IsAlgebraic` theorems, and IMO do not logically fit into the other existing files in `LinearAlgebra/Dimension`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
109/3 |
Mathlib.lean,Mathlib/LinearAlgebra/Dimension/Algebraic.lean,Mathlib/LinearAlgebra/Dimension/Free.lean |
3 |
5 |
['ChiCubed', 'eric-wieser', 'github-actions', 'themathqueen'] |
nobody |
12-62358 12 days ago |
12-63899 12 days ago |
42-28971 42 days |
| 39294 |
Sfgangloff author:Sfgangloff |
feat(SymbolicDynamics): prove LanguageOn monotonicity under intersection |
In symbolic dynamics.
This PR proves that taking the language over a finite shape is monotone with respect to intersections of configuration sets:
```math
\mathrm{LanguageOn}(X \cap Y)\, U
\subseteq
\mathrm{LanguageOn}\, X\, U \cap \mathrm{LanguageOn}\, Y\, U
```
The proof is a direct unfolding of definitions: a pattern in the language of `X ∩ Y` comes from restricting a configuration `x ∈ X ∩ Y`. Since such an `x` belongs simultaneously to `X` and `Y`, the same restriction witness gives membership both in `LanguageOn X U` and in `LanguageOn Y U`, yielding membership in their intersection.
Related to issue #39252 |
t-dynamics
new-contributor
awaiting-author
|
9/1 |
Mathlib/Dynamics/SymbolicDynamics/Basic.lean |
1 |
3 |
['github-actions', 'sgouezel'] |
sgouezel assignee:sgouezel |
11-77077 11 days ago |
11-77077 11 days ago |
58-26524 58 days |
| 14237 |
js2357 author:js2357 |
feat: Define the localization of a fractional ideal at a prime ideal |
Define the localization of a fractional ideal at a prime ideal, and prove some basic properties.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This PR is part 3 out of 4 of a proof of `isDedekindDomain_iff_isDedekindDomainDvr`.
Part 4 is available here: #14242
- [x] depends on: #14099 Part 1
- [x] depends on: #14216 Part 2
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
230/0 |
Mathlib.lean,Mathlib/RingTheory/FractionalIdeal/LocalizedAtPrime.lean,Mathlib/RingTheory/Localization/Basic.lean |
3 |
23 |
['Vierkantor', 'YaelDillies', 'alreadydone', 'github-actions', 'js2357', 'kbuzzard', 'leanprover-community-bot-assistant', 'mathlib4-merge-conflict-bot'] |
Vierkantor assignee:Vierkantor |
11-12598 11 days ago |
694-76 693 days ago |
6-3525 6 days |
| 40496 |
thefundamentaltheor3m author:thefundamentaltheor3m |
feat(LinearAlgebra/AffineSpace/Simplex): the surface of a simplex |
I wrote the definition myself, and got Claude to generate some of the boilerplate code (which I then reviewed and had it clean up).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
new-contributor
awaiting-author
label:t-algebra$ |
94/8 |
Mathlib/LinearAlgebra/AffineSpace/Simplex/Basic.lean |
1 |
8 |
['github-actions', 'grunweg', 'mathlib-bors', 'mathlib-merge-conflicts', 'thefundamentaltheor3m', 'wwylele'] |
nobody |
11-12306 11 days ago |
11-12306 11 days ago |
13-26547 13 days |
| 40479 |
thefundamentaltheor3m author:thefundamentaltheor3m |
feat(LinearAlgebra/AffineSpace/Simplex/Standard): Define the standard $n$-simplex as an `Affine.Simplex` |
In this PR, we define a basis-dependent construction of an affine simplex, using which we define the standard $n$-simplex in `Fin n → k` in terms of `Pi.basisFun`.
The main constructions are `Affine.Simplex.mkOfAffineBasis` and `Affine.Simplex.mkOfBasis`. The former constructs a simplex from any affine basis of an affine space and the latter constructs an affine simplex in a vector space viewed as an affine space. We then relate the construction to `stdSimplex`, defined in `Analysis.Convex.StdSimplex`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
LLM-generated
new-contributor
awaiting-author
|
199/0 |
Mathlib.lean,Mathlib/LinearAlgebra/AffineSpace/Basis.lean,Mathlib/LinearAlgebra/AffineSpace/Simplex/Standard.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean |
4 |
8 |
['github-actions', 'wwylele'] |
nobody |
11-1738 11 days ago |
11-1738 11 days ago |
28-59574 28 days |
| 34005 |
MSpill author:MSpill |
feat: inverse function theorem for manifolds (concrete version) |
Proves the inverse function theorem for manifolds: given manifolds $M, N$ and a $C^n$ map $f : M \to N$ whose differential is a linear isomorphism at $p \in M$, then $f$ is a local diffeomorphism at $p$, provided that both $p$ and its image are interior points. The proof proceeds in 4 main steps:
1. Define composition of partial diffeomorphisms
2. Show that the extended chart at an interior point can be restricted to an open set on which it is a partial diffeomorphism, viewing the model vector space as a manifold modelled on itself trivially
3. Use the inverse function theorem (applied to $f$ written in coordinates) to obtain a partial diffeomorphism between model vector spaces
4. Compose with chart diffeomorphisms to obtain a partial diffeomorphism between the manifolds.
------
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-differential-geometry
new-contributor
|
256/3 |
Mathlib.lean,Mathlib/Geometry/Manifold/InverseFunctionTheorem.lean,Mathlib/Geometry/Manifold/IsManifold/Basic.lean,Mathlib/Geometry/Manifold/LocalDiffeomorph.lean |
4 |
12 |
['MSpill', 'github-actions', 'grunweg', 'mathlib-merge-conflicts'] |
grunweg assignee:grunweg |
10-60871 10 days ago |
187-78781 187 days ago |
0-1082 18 minutes |
| 41557 |
lakesare author:lakesare |
feat(Analysis/Convolution): add convolution_symm, convolution, (3 more lemmas) |
**Upstreaming from Carleson: [/Carleson/ToMathlib/Analysis/Convolution.lean](https://github.com/fpvandoorn/carleson/blob/master/Carleson/ToMathlib/Analysis/Convolution.lean)**
___
### Upstreamed theorems
- **theorem convolution_symm**
- renamed `g` to `f'` (to reuse the existing section variable)
- **theorem AEStronglyMeasurable.convolution** (refactored)
- **lemma lintegral_enorm_convolution_integrand_le_eLpNorm_mul_eLpNorm** (refactored)
- removed the comment _"This implies both of the following theorems convolutionExists_of_memLp_memLp and enorm_convolution_le_eLpNorm_mul_eLpNorm."_, because the comment would create an impression that it's an auxiliary lemma that shouldn't be used on its own
- **theorem ConvolutionExists.of_memLp_memLp** (slightly refactored)
- `(hf : AEStronglyMeasurable f μ)` and `(hg : AEStronglyMeasurable g μ)` were removed, because we can derive those hypotheses from `hfp.aestronglyMeasurable` and `hgq.aestronglyMeasurable` respectively (which we did during refactoring)
- **theorem enorm_convolution_le_eLpNorm_mul_eLpNorm**
___
- **lemma lintegral_enorm_convolution_integrand_le_eLpNorm_mul_eLpNorm,
theorem ConvolutionExists.of_memLp_memLp,
theorem enorm_convolution_le_eLpNorm_mul_eLpNorm**
- turned `(hpq : p.HolderConjugate q)` into an instance implicit `[hpq : p.HolderConjugate q]` (there does exist a `class HolderConjugate` for ENNReals, so mathlib seems to use instance implicits in such cases, like e.g. [here](https://github.com/leanprover-community/mathlib4/blob/79aee35d9696d759b73eed71d7dde666750bc35e/Mathlib/Analysis/Normed/Lp/lpHolder.lean#L262))
- **theorem AEStronglyMeasurable.convolution,
lemma lintegral_enorm_convolution_integrand_le_eLpNorm_mul_eLpNorm,
theorem ConvolutionExists.of_memLp_memLp,
theorem enorm_convolution_le_eLpNorm_mul_eLpNorm**
- `L` was implicit, now became explicit (to comply with existing section variables)
- changed `[SigmaFinite μ]` to `[SFinite μ]` (because it's a weaker requirement [/Mathlib/MeasureTheory/Measure/Typeclasses/SFinite.lean#L191](https://github.com/leanprover-community/mathlib4/blob/9ef14c7b82f8a45f8dfc03dace26d6bb25023bac/Mathlib/MeasureTheory/Measure/Typeclasses/SFinite.lean#L191))
|
carleson
t-analysis
new-contributor
|
58/5 |
Mathlib/Analysis/Convolution.lean |
1 |
5 |
['github-actions', 'lakesare'] |
nobody |
10-43346 10 days ago |
10-45327 10 days ago |
10-44949 10 days |
| 41081 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add Subrepresentation.toRepresentation_apply and Subrepresentation.quotient |
Add a lemma for Subrepresentation recording the inherited group action. Help avoid unfold Subrepresentation.toRepresentation.
Add the quotient representation associated to a subrepresentaiton. It wraps up Representation.quotient and Representation.Subrepresentation. Help avoid writing down explicitly the stability condition required in Representation.quotient.
|
t-algebra
new-contributor
label:t-algebra$ |
26/0 |
Mathlib/RepresentationTheory/Subrepresentation.lean |
1 |
17 |
['JX-Mo', 'Whysoserioushah', 'github-actions'] |
nobody |
10-28833 10 days ago |
10-29440 10 days ago |
25-84873 25 days |
| 37456 |
Robertboy18 author:Robertboy18 |
feat(LinearAlgebra/AffineSpace): add parallel form of Desargues's theorem |
This PR adds an affine parallel form of Desargues's theorem, corresponding to entry `87` of the Lean community “100 theorems” list and following the related Rocq/Coq affine-geometry statement.
**Main changes**
- New file `Mathlib/LinearAlgebra/AffineSpace/Desargues.lean` with `parallel_third_side_of_perspective`.
- Add the corresponding `public import` to `Mathlib.lean`.
- Update `docs/100.yaml` entry `87` with a note that this is the parallel affine form.
**Proof idea**
The proof compares side vectors using `exists_eq_smul_of_parallel` for the two given pairs of parallel sides. The shared comparison along `SA` forces the same scalar, which gives parallelism of the third pair of sides.
Tests: `lake build Mathlib.LinearAlgebra.AffineSpace.Desargues`
AI disclosure: GPT-5.2 Pro was used for assistance with web search/background details about the theorem and for finding useful existing Mathlib lemmas. The theorem statement and Lean formalization were written and checked by hand.
---
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
awaiting-author
LLM-generated
label:t-algebra$ |
133/0 |
Mathlib.lean,Mathlib/LinearAlgebra/AffineSpace/Desargues.lean |
2 |
17 |
['Robertboy18', 'SnirBroshi', 'copilot-pull-request-reviewer', 'eric-wieser', 'github-actions', 'wwylele'] |
eric-wieser assignee:eric-wieser |
9-73972 9 days ago |
104-1021 104 days ago |
8-72313 8 days |
| 41426 |
gmcninch-prof author:gmcninch-prof |
Add SymmetricMap: symmetric multilinear maps |
Define `SymmetricMap R M N ι`, the type of symmetric `R`-multilinear maps
from `ι → M` to `N` (i.e. multilinear maps invariant under permutation of
their arguments).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
The code is adapted from Kenny Lau's work
[here](https://github.com/kckennylau/EllipticCurve/blob/master/EllipticCurve/ProjectiveSpace/TensorProduct/SymmetricMap.lean)
-- see [`SymmetricMap`](https://github.com/gmcninch-prof/mathlib4/blob/symmetric-power-lift/Mathlib/LinearAlgebra/TensorProduct/SymmetricMap.lean).
This PR previously also contained the universal property / `lift` for
`SymmetricPower` (relating linear maps out of `Sym[R]^n M` to symmetric
multilinear maps), but per reviewer feedback on Zulip that work has been
split into a separate PR that depends on this one.
Zulip discussion [here](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/SymmetricPower.20universal.20property/near/608532652)
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
397/0 |
Mathlib.lean,Mathlib/LinearAlgebra/TensorProduct/SymmetricMap.lean |
2 |
10 |
['github-actions', 'gmcninch-prof', 'jcommelin'] |
nobody |
9-68460 9 days ago |
9-68460 9 days ago |
11-36226 11 days |
| 41593 |
Mal-Pat author:Mal-Pat |
feat(Combinatorics/SimpleGraph/Girth): `G.girth ≤ 2 * G.diam + 1` |
Add the lemma `G.girth ≤ 2 * G.diam + 1` given that `G.diam ≠ 0`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [ ] depends on: #25834 |
t-combinatorics
new-contributor
blocked-by-other-PR
|
26/7 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
3 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
9-61484 9 days ago |
11-77460 11 days ago |
0-809 13 minutes |
| 41308 |
sergantche author:sergantche |
feat: add `List.insertIdx_eraseIdx_getElem_perm` |
Adds `List.insertIdx_eraseIdx_getElem_perm`, showing that erasing an element by index and inserting it at any valid position gives a permutation of the original list.
This packages the existing lemmas `List.perm_insertIdx` and `List.getElem_cons_eraseIdx_perm` into a direct API lemma.
AI assistance was used in preparing this PR; I reviewed the statement and proof.
[](https://gitpod.io/from-referrer/) |
t-data
new-contributor
|
5/0 |
Mathlib/Data/List/Perm/Basic.lean |
1 |
4 |
['github-actions', 'sergantche', 'vlad902'] |
nobody |
9-57644 9 days ago |
9-60487 9 days ago |
13-63346 13 days |
| 40345 |
imalinowskip author:imalinowskip |
feat(Probability): Cramér-Wold |
|
t-measure-probability
new-contributor
|
79/0 |
Mathlib.lean,Mathlib/Probability/CramerWold.lean |
2 |
33 |
['RemyDegenne', 'felixpernegger', 'github-actions', 'imalinowskip', 'mathlib-merge-conflicts', 'wwylele'] |
RemyDegenne assignee:RemyDegenne |
9-56798 9 days ago |
14-77511 14 days ago |
36-29053 36 days |
| 39212 |
emlis42 author:emlis42 |
feat(Algebra/ContinuedFractions): add `partNums!` and `partDens!` |
This PR adds `partNums!` and `partDens!`, which provide infinite stream representations for the sequences of partial numerators and denominators of a generalized continued fraction. |
t-algebra
new-contributor
label:t-algebra$ |
66/35 |
Mathlib/Algebra/ContinuedFractions/Basic.lean,Mathlib/Algebra/ContinuedFractions/ContinuantsRecurrence.lean,Mathlib/Algebra/ContinuedFractions/Determinant.lean,Mathlib/Algebra/ContinuedFractions/Translations.lean |
4 |
4 |
['emlis42', 'github-actions', 'grunweg'] |
joelriou assignee:joelriou |
9-9344 9 days ago |
71-78495 71 days ago |
71-77959 71 days |
| 38214 |
emlis42 author:emlis42 |
feat(Algebra/ContinuedFractions): add Euler's continued fraction |
This PR formalizes Euler continued fractions by providing `euler` which construct one by giving head term and coefficients with some basic property.
We also introduce a transformation `GenContFract.toEuler` that maps a generalized continued fraction `g : GenContFract K` to an equivalent Euler continued fraction. |
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
364/0 |
Mathlib.lean,Mathlib/Algebra/ContinuedFractions/Euler.lean |
2 |
74 |
['YaelDillies', 'emlis42', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
9-8694 9 days ago |
14-78428 14 days ago |
77-41975 77 days |
| 41678 |
JX-Mo author:JX-Mo |
refactor(RepresentationTheory): record the concrete binary biproduct |
Record the concrete binary biproduct explicitly from the instance HasBinaryBiproducts to make it reusable.
|
t-algebra
new-contributor
label:t-algebra$ |
23/7 |
Mathlib/RepresentationTheory/Rep/Basic.lean |
1 |
7 |
['JX-Mo', 'Whysoserioushah', 'github-actions'] |
nobody |
9-3405 9 days ago |
9-13096 9 days ago |
9-12580 9 days |
| 37279 |
imalinowskip author:imalinowskip |
feat(Probability): multivariate CLT |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
<!-- [ ] depends on: #40345 -->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-measure-probability
awaiting-author
blocked-by-other-PR
|
266/3 |
Mathlib/Probability/CentralLimitTheorem.lean |
1 |
17 |
['EtienneC30', 'RemyDegenne', 'github-actions', 'imalinowskip', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
RemyDegenne assignee:RemyDegenne |
8-62709 8 days ago |
49-2781 49 days ago |
7-41719 7 days |
| 38848 |
jcreinhold author:jcreinhold |
feat(AlgebraicTopology/SimplicialSet): exists_isPushout_of_ne_top |
Every proper subcomplex of a simplicial set extends by attaching a single cell along its boundary, exhibited as a pushout of `∂Δ[n] ↪ Δ[n]`. This is the per-cell input for cell-by-cell filtrations of monomorphisms in `SSet`.
Adapted from @joelriou 's [proof](https://github.com/joelriou/topcat-model-category/blob/813338a8c88cfe0096deed7e3ba7daf92d4a1c71/TopCatModelCategory/SSet/Boundary.lean#L187). I also added the supporting lemma `Types.isPullback_of_eq_setPreimage` (set-preimage square is a pullback in `Type u`).
AI use: Claude helped locate `subtype_val_mono` and the `backward.isDefEq.respectTransparency` option.
|
t-algebraic-topology
new-contributor
|
117/3 |
Mathlib/AlgebraicTopology/SimplicialSet/Boundary.lean,Mathlib/CategoryTheory/Limits/Types/Pullbacks.lean |
2 |
37 |
['dagurtomas', 'github-actions', 'jcreinhold', 'joelriou', 'mckoen'] |
mattrobball assignee:mattrobball |
8-50612 8 days ago |
33-83671 33 days ago |
79-47052 79 days |
| 40741 |
AntoineduFresne author:AntoineduFresne |
feat(order): dilworth's and mirsky's theorems for finite orders |
I add Dilworth's theorem and its order dual, Mirsky's theorem, for finite subsets of a partial order, together with the order-theoretic lemmas they rest on.
A prior external formalization by Vlad Tsyrklevich is linked from `1000.yaml`; this is an independent `Finset`-based development using Galvin's proof, and I agreed the `1000.yaml` update with him.
I split the min-max content, as for Hall's marriage theorem, into a weak-duality inequality and a strong-duality existence of a matching pair, so I never define an extremal quantity over families of sets (no `Finset.min'` / `Finset.max'`):
- `dilworth` / `mirsky` — an antichain and a chain cover (resp. a chain and an antichain cover) of equal size;
- `antichain_le_chain_cover` / `chain_le_antichain_cover` — the weak-duality inequalities, for an arbitrary relation;
- `dilworth_partition` / `mirsky_partition` — the same with a pairwise-disjoint partition.
For Dilworth I use Galvin's induction (gluing step `chainCover_glue`); I avoid the König /
bipartite-matching route since König isn't in Mathlib yet (at least last time I checked). I prove Mirsky directly (peeling off minimal elements) rather than via `OrderDual`, since the direct induction seems simpler to me and the two proofs already share their foundations (the closure lemmas and the injective weak dualities).
Internally I work with an injection `f : α → Finset α` on the antichain rather than with the
`Finset (Finset α)` cover directly, so distinctness of the chains comes from the antichain property instead of a separate bookkeeping.
## Questions I'd like input on
1. Explicit min-max? I give weak duality plus a matching pair, from which "largest antichain = smallest chain cover" follows; I do not state that equality as a single theorem (doing so would, I think, mean defining the extremal quantities I wanted to avoid). Would you also like an explicit min-max statement?
2. Two layers of weak duality. I expose it twice: an injective form (`IsAntichain.exists_injOn_mem_chains`, over an arbitrary relation and an arbitrary index type, no finiteness) and a `Finset` cardinality form (`antichain_le_chain_cover`), the latter a one-line specialization of the former. I'm not sure whether exposing both is right, or whether one of them should be canonical. And is there appetite to push the general core to an `ℕ∞` / infinite version, or is the finite form the right scope here?
3. `[DecidableEq α]` on the main theorems. It comes only from writing the cover as
`s = 𝒞.biUnion id` (`Finset.biUnion` needs it); a membership-form coverage condition such as `∀ x, x ∈ s ↔ ∃ C ∈ 𝒞, x ∈ C` would drop the assumption, though it seems to me a bit less readable. Which do you prefer? (I think the injective-form weak dualities assume neither order, finiteness, nor `DecidableEq`.)
4. Naming. I use `C` / `A` for a chain / antichain and `𝒞` / `𝒜` for a chain / antichain cover (for hopefully obvious reason). Happy to change these if you would prefer something else.
## Open questions
- File placement (`Mathlib/Order/Dilworth.lean`?), and whether the general lemmas (the antichain closures, the injective transversal and weak dualities) should live in existing files (`Mathlib/Order/Antichain.lean`, `Mathlib/Order/UpperLower/…`) rather than in a new file.
Zulip: https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Antoine.20du.20Fresne.20von.20Hohenesche/with/604112426
AI use: I worked out all proofs on paper first and most of the design structure of the file. I then used Claude Code (Claude Opus) to transcribe my paper proofs into Lean, weaken hypotheses, reduce redundancy, and fix comment typos. |
t-order
new-contributor
LLM-generated
|
610/3 |
Mathlib.lean,Mathlib/Order/Dilworth.lean,docs/1000.yaml |
3 |
6 |
['AntoineduFresne', 'SnirBroshi', 'github-actions'] |
nobody |
7-86267 7 days ago |
34-28590 34 days ago |
34-29216 34 days |
| 39607 |
TentativeConvert author:TentativeConvert |
feat(Algebra/DirectSum): equivalence between direct sum indexed by ι₁ and double sum indexed by ι₂ and fibres of f : ι₁ → ι₂ |
1. Add variant `equivCongrLeft'` of `equivCongrLeft`, and corresponding `…_apply` lemma.
2. Add `…_of lemmas` for both `equivCongrLeft` and `equivCongrLeft'`.
3. Add `…of lemma` for `sigmaCurry`, i.e. `sigmaCurry_of`.
4. Add `sigmaFiberAddEquiv`: the equivalence between a direct sum indexed by a type `ι₁` and the double sum indexed by a type `ι₂` and the fibres of a map `f : ι₁ → ι₂`. Add two `…_apply` lemmas and an `…_of` lemma.
---
This is supposed to be a first step towards merging the draft PR #39356.
re 1: Mathematically, I don't see why one version should be preferred over the other, but I found the existing `equivCongrLeft` more difficult to work with when the equivalence `h : ι ≃ κ` is naturally given in the opposite direction. (I could not avoid explicit type casts through the equality `h.symm.symm = h` when defining `sigmaFiberAddEquiv` in terms of `equivCongrLeft`.)
Very unsure about the name of `equivCongrLeft'`. (I see that the name `equivCongrLeft` was chosen in analogy with `Equiv.piCongrLeft`. `Equiv.piCongrRight` looks very different, so presumably `equivCongrLeft'` should *not* be called `equivCongrRight`.)
re 4: Very unsure about the naming of the two different `…_apply` lemmas; called them `…_apply` and `…_apply'` for now. The second (`…_apply'`) cannot be a `simp` lemma as it would prevent the first (`…_apply`) from firing.
I've used Claude Opus for understanding error messages and git interaction, but everything is hand coded.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
maintainer-merge
label:t-algebra$ |
46/3 |
Mathlib/Algebra/DirectSum/Basic.lean |
1 |
48 |
['TentativeConvert', 'eric-wieser', 'github-actions', 'joneugster', 'themathqueen'] |
joneugster assignee:joneugster |
7-84227 7 days ago |
7-86209 7 days ago |
62-7977 62 days |
| 28246 |
Sebi-Kumar author:Sebi-Kumar |
feat(AlgebraicTopology/FundamentalGroupoid): the n-sphere is simply connected for n > 1 |
Prove that the `n`-dimensional sphere (i.e., the unit sphere centered at the origin in `(n + 1)`-dimensional real Euclidean space) is a simply connected space for `n > 1`. This proof follows Hatcher's "Algebraic Topology"; we first prove a general lemma about decomposing loops and then exploit the fact that non-surjective loops in the sphere are homotopically trivial.
Note: To get this file to build, I edited `Mathlib/Tactic/Linter/DirectoryDependency.lean` to remove the restrictions on AlgebraicTopology files importing Geometry, NumberTheory, and FieldTheory files. Thank you to those who shared their expertise [here](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Warning.20that.20AlgebraicTopology.20can't.20import.20SetTheory/with/533833638). As I understand it, this is just a short-term solution, so I would appreciate feedback on what to do about this situation.
Note: I am unsure where exactly the file `SimplyConnectedSphere.lean` should go or whether that is an appropriate name for the file, so feedback there would be appreciated.
---
To provide additional context, this code was written as a part of the Fields Undergraduate Summer Research Program at the University of Western Ontario under the supervision of Chris Kapulkin and Daniel Carranza.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #28208
- [x] depends on: #28198
- [x] depends on: #28185
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
new-contributor
|
371/3 |
Mathlib.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/SimplyConnectedSphere.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/VanKampen.lean,Mathlib/Logic/Equiv/PartialEquiv.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean,Mathlib/Topology/Path.lean |
6 |
19 |
['Sebi-Kumar', 'dagurtomas', 'github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'robin-carlier'] |
robin-carlier assignee:robin-carlier |
7-73440 7 days ago |
7-73440 7 days ago |
21-64770 21 days |
| 36487 |
samueloettl author:samueloettl |
feat(Dynamics): Ergodicity characterization |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #35402
- [x] depends on: #35451
This is a work in progress for a characterization of ergodicity via a Birkhoff Average.
Coarse Feedback is very encouraged.
[](https://gitpod.io/from-referrer/)
|
WIP
new-contributor
large-import
blocked-by-other-PR
|
421/1 |
Mathlib/Dynamics/Ergodic/Function.lean,Mathlib/Dynamics/Ergodic/OnAverageIndependent.lean,Mathlib/Topology/MetricSpace/Pseudo/Basic.lean |
3 |
5 |
['github-actions', 'lua-vr', 'mathlib-dependent-issues', 'samueloettl'] |
nobody |
7-59911 7 days ago |
132-82525 132 days ago |
0-163 2 minutes |
| 38871 |
0xTerencePrime author:0xTerencePrime |
feat(Combinatorics/SimpleGraph): add parity lemmas for outer and inner vertices |
Adds three lemmas to `SimpleGraph.DegreeSum`:
- `sum_degrees_option_zmod_two`: the handshaking lemma for `Option I` over ZMod 2
- `degree_none_zmod_two_eq_sum`: simp-normal form of the above
- `card_degree_one_option_eq_outer_zmod_two`: under degree bound ≤ 2, count of degree-1 inner vertices equals outer vertex degree mod 2 |
t-combinatorics
new-contributor
|
65/3 |
Mathlib/Combinatorics/SimpleGraph/DegreeSum.lean |
1 |
6 |
['0xTerencePrime', 'SnirBroshi', 'github-actions'] |
nobody |
7-49711 7 days ago |
80-7396 80 days ago |
80-6860 80 days |
| 35812 |
khwilson author:khwilson |
feat(MeasureTheory/Group/GeometryOfNumbers): successive minima and existence of a directional basis |
Define the successive minima of a discrete subgroup of a real vector space with respect to a convex set. These invariants show up throughout the geometry of numbers and are the focus of Minkowski's Second Theorem (whose statement is left here with a `proof_wanted`).
Note: The key lemma is that the "gauge set" of the convex set is closed. I took the approach of showing that it is sequentially closed. There's an alternative approach via showing it's the union of a finite number of closed sets. I personally thought this approach was more intuitive, but the union approach may result in a slightly shorter proof.
Co-authored-by: Yaël Dillies <yael.dillies@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [x] depends on: #xyz [optional extra text]
-->
- [x] depends on #37738
- [x] depends on #37740
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-measure-probability
|
350/36 |
Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Analysis/Convex/Basic.lean,Mathlib/Analysis/Convex/Body.lean,Mathlib/Analysis/Convex/Gauge.lean,Mathlib/LinearAlgebra/FiniteDimensional/Basic.lean,Mathlib/MeasureTheory/Group/GeometryOfNumbers.lean,Mathlib/NumberTheory/NumberField/Units/Regulator.lean |
7 |
98 |
['Vierkantor', 'YaelDillies', 'github-actions', 'joneugster', 'khwilson', 'mathlib-merge-conflicts', 'ocfnash', 'sgouezel'] |
nobody |
7-45950 7 days ago |
12-71767 12 days ago |
75-60283 75 days |
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Approval(s) |
Updated |
Last status change |
total time in review |
| 12608 |
eric-wieser author:eric-wieser |
feat: allow `nsmul` / `zsmul` to be omitted again, with a warning |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
t-meta
label:t-algebra$ |
118/2 |
Mathlib.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Tactic.lean,Mathlib/Tactic/DefaultFieldLinter.lean,scripts/noshake.json,test/default_field_linter.lean |
6 |
12 |
['YaelDillies', 'eric-wieser', 'fpvandoorn', 'github-actions'] |
nobody |
1 |
721-23678 1 year ago |
794-70065 794 days ago |
5-72493 5 days |
| 8519 |
eric-wieser author:eric-wieser |
refactor(LinearAlgebra/TensorProduct): golf using `liftAddHom` |
This new `TensorProduct.liftAddHom` doesn't require bilinearity, only that scalar multiplication can be moved between the arguments.
While in theory we only need the `AddMonoidHom` version as it offers exactly the same generality, we first provide an unbundled `liftFun` as this seems to give a sizeable performance boost if used in downstream `lift` variants.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [x] depends on: #8571
- [x] depends on: #8584
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
label:t-algebra$ |
53/50 |
Mathlib/Algebra/Category/AlgebraCat/Monoidal.lean,Mathlib/LinearAlgebra/TensorProduct.lean,Mathlib/LinearAlgebra/TensorProduct/Tower.lean |
3 |
28 |
['bustercopley', 'eric-wieser', 'jcommelin', 'jjaassoonn', 'leanprover-bot', 'mathlib-bors'] |
nobody |
1 |
721-23675 1 year ago |
960-75438 960 days ago |
5-6524 5 days |
| 9146 |
laughinggas author:laughinggas |
feat(Data/ZMod/Defs): Topological structure on `ZMod` |
Added a discrete topology structure to `ZMod n` for all `n`
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
awaiting-author
t-topology
label:t-algebra$ |
55/3 |
Mathlib.lean,Mathlib/Topology/Algebra/Constructions.lean,Mathlib/Topology/Algebra/Group/Basic.lean,Mathlib/Topology/Instances/ZMod.lean,Mathlib/Topology/Maps.lean |
5 |
61 |
['YaelDillies', 'eric-wieser', 'github-actions', 'jcommelin', 'laughinggas', 'mo271', 'urkud'] |
nobody |
1 |
721-23675 1 year ago |
927-68166 927 days ago |
7-11053 7 days |
| 12751 |
Command-Master author:Command-Master |
feat: add lemmas for Nat/Bits, Nat/Bitwise and Nat/Size |
Remove `@[simp]` from `Nat.bit_false` and `Nat.bit_true`, as `bit0` and `bit1` are deprecated, and add some lemmas to `Bits`, `Bitwise` and `Size`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
new-contributor
|
66/7 |
Mathlib/Data/Nat/Bits.lean,Mathlib/Data/Nat/Bitwise.lean,Mathlib/Data/Nat/Multiplicity.lean,Mathlib/Data/Nat/Size.lean |
4 |
26 |
['Command-Master', 'Rida-Hamadani', 'Ruben-VandeVelde', 'YaelDillies', 'github-actions', 'jcommelin'] |
nobody |
1 |
702-975 1 year ago |
737-7197 737 days ago |
56-40668 56 days |
| 15448 |
urkud author:urkud |
chore(*): deprecate `Option.elim'` |
Use `Option.elim` instead.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
merge-conflict
awaiting-author
tech debt
|
54/50 |
Mathlib/Algebra/BigOperators/Option.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Analysis/BoxIntegral/Partition/Additive.lean,Mathlib/Analysis/BoxIntegral/Partition/Basic.lean,Mathlib/Analysis/BoxIntegral/Partition/Split.lean,Mathlib/Analysis/Calculus/LagrangeMultipliers.lean,Mathlib/CategoryTheory/Category/PartialFun.lean,Mathlib/Computability/TMToPartrec.lean,Mathlib/Data/Option/Defs.lean,Mathlib/LinearAlgebra/Basis.lean,Mathlib/Logic/Embedding/Set.lean,Mathlib/Logic/Equiv/Basic.lean,Mathlib/MeasureTheory/OuterMeasure/Induced.lean,Mathlib/NumberTheory/Dioph.lean,Mathlib/Topology/Compactness/Paracompact.lean,Mathlib/Topology/LocallyFinite.lean |
17 |
12 |
['Ruben-VandeVelde', 'YaelDillies', 'github-actions', 'grunweg', 'urkud'] |
nobody |
1 |
701-76428 1 year ago |
711-36190 711 days ago |
7-18420 7 days |
| 13514 |
madvorak author:madvorak |
feat(Computability/ContextFreeGrammar): closure under union |
- [ ] depends on: #15895
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
blocked-by-other-PR
|
448/4 |
Mathlib/Computability/ContextFreeGrammar.lean |
1 |
50 |
['Rida-Hamadani', 'YaelDillies', 'github-actions', 'madvorak'] |
nobody |
1 |
627-16832 1 year ago |
704-77213 704 days ago |
72-28417 72 days |
| 12133 |
ADedecker author:ADedecker |
feat: generalize instIsLowerProd to arbitrary products |
Also change a bit the proof of the product case to match my own taste, feel free to tell if you prefer the old one.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-topology
t-order
|
34/14 |
Mathlib/Topology/Constructions.lean,Mathlib/Topology/Order/LowerUpperTopology.lean |
2 |
13 |
['Ruben-VandeVelde', 'TwoFX', 'github-actions', 'jcommelin', 'mans0954', 'mathlib-bors', 'riccardobrasca'] |
nobody |
2 |
614-22880 1 year ago |
765-18516 765 days ago |
63-69226 63 days |
| 18461 |
hannahfechtner author:hannahfechtner |
feat: left and right common multiples mixins |
add mixins for left and right common multiples. These carry the data of what factors are used to create the common multiples
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
78/0 |
Mathlib/Algebra/Group/Defs.lean |
1 |
13 |
['github-actions', 'hannahfechtner', 'jcommelin', 'kbuzzard', 'kim-em', 'trivial1711'] |
nobody |
1 |
548-19347 1 year ago |
548-19347 548 days ago |
69-35596 69 days |
| 2605 |
eric-wieser author:eric-wieser |
chore: better error message in linarith |
On this mwe:
```lean
import Mathlib.Tactic.Linarith
example (s : Set ℕ) (h : s = s) : 0 ≤ 1 :=
by linarith
```
this now indicates where the internal error is coming from.
Is there a better way of chaining errors than this?
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-meta
|
12/1 |
Mathlib/Tactic/Linarith/Preprocessing.lean |
1 |
3 |
['Vierkantor', 'harahu', 'kim-em', 'mo271'] |
nobody |
1 |
538-1367 1 year ago |
1185-32906 1185 days ago |
51-42225 51 days |
| 19425 |
hrmacbeth author:hrmacbeth |
perf: gcongr forward-reasoning adjustment |
This PR changes the "forward-reasoning" component of `gcongr`, rendering it more efficient, particularly in problems with a large number of variables/hypotheses in the context.
Previously `gcongr` attempted to match *every* `LocalDecl` against *every* node in the parse tree using *each* of the five implemented `@[gcongr_forward]` mini-tactics: matching directly, matching after applying `symm`, matching after applying `le_of_lt`, etc etc.
The new algorithm filters out the non-Prop `LocalDecl`s, and also adjusts the `@[gcongr_forward]` extensions so that, rather than re-apply the relevant lemmas (`symm`, `le_of_lt`, etc) at every node in the parse tree, the lemmas are applied in advance to the `LocalDecl`s and the result (if successful) stored.
The performance effect on mathlib as a whole is miniscule, but it speeds up the profiler's count of "tactic execution of Mathlib.Tactic.GCongr" in the newly-added test from 257 ms to 47 ms, and has a similar effect on real-life examples in an analysis project of mine.
Co-authored-by: Mario Carneiro <di.gama@gmail.com>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
(Note that Mario provided the ideas but not the code, so please review with appropriate diligence!) |
merge-conflict
awaiting-author
|
130/59 |
Mathlib/Order/Lattice.lean,Mathlib/Tactic/GCongr/Core.lean,Mathlib/Tactic/GCongr/ForwardAttr.lean,MathlibTest/GCongr/inequalities.lean |
4 |
17 |
['Vierkantor', 'github-actions', 'hrmacbeth', 'leanprover-bot', 'leanprover-community-bot-assistant'] |
Vierkantor assignee:Vierkantor |
1 |
468-17729 1 year ago |
601-6146 601 days ago |
1-41769 1 day |
| 19315 |
quangvdao author:quangvdao |
feat(Data/Finsupp/Fin): Add `Finsupp` operations on `Fin` tuple |
This PR adds more analogues of operations on `Fin` tuples to the `Finsupp` setting. Before, there were only `Finsupp.cons` and `Finsupp.tail`. Now there are also `Finsupp.snoc`, `Finsupp.insertNth`, `Finsupp.init`, and `Finsupp.removeNth`. These all come with supporting lemmas.
I also removed the porting comment about `succAboveCases` in `Data/Fin/Basic`, and added a lemma about `succAbove` in `Data/Fin/Tuple/Basic`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #20361
- [x] depends on: #20771
- [x] depends on: #20770
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-data
|
193/16 |
Mathlib/Algebra/BigOperators/Fin.lean,Mathlib/Algebra/BigOperators/Finsupp.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Data/Finsupp/Fin.lean,Mathlib/RingTheory/MvPolynomial/Homogeneous.lean,scripts/nolints_prime_decls.txt |
6 |
44 |
['YaelDillies', 'github-actions', 'j-loreaux', 'kbuzzard', 'mathlib4-dependent-issues-bot', 'quangvdao'] |
nobody |
1 |
441-60734 1 year ago |
518-85757 518 days ago |
43-80700 43 days |
| 21276 |
GabinKolly author:GabinKolly |
feat(ModelTheory/Substructures): define equivalences between equal substructures |
Define first-order equivalences between equal substructures, and prove related properties.
---
This is some preparatory work for #18876
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-logic
|
62/0 |
Mathlib/ModelTheory/Substructures.lean |
1 |
19 |
['GabinKolly', 'YaelDillies', 'fpvandoorn', 'github-actions', 'grunweg'] |
nobody |
1 |
438-78808 1 year ago |
438-78808 438 days ago |
46-55730 46 days |
| 25401 |
digama0 author:digama0 |
feat(Util): SuppressSorry option |
See also leanprover/lean4#8611 and [#lean4 > Silent sorry @ 💬](https://leanprover.zulipchat.com/#narrow/channel/270676-lean4/topic/Silent.20sorry/near/503537964). This is a stop-gap solution while leanprover/lean4#8611 is underway, but it works about as well as any other built in option. Hooking declaration elaborators turns out to be a very powerful technique.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
|
342/0 |
Mathlib.lean,Mathlib/Util/CommandElabHook.lean,Mathlib/Util/SuppressSorry.lean,MathlibTest/suppressSorry.lean |
4 |
15 |
['digama0', 'eric-wieser', 'github-actions', 'mathlib4-merge-conflict-bot'] |
alexjbest assignee:alexjbest |
1 |
342-55196 11 months ago |
342-55196 342 days ago |
71-28496 71 days |
| 26462 |
PSchwahn author:PSchwahn |
feat(LinearAlgebra/Projection): add results about inverse of `Submodule.prodEquivOfIsCompl` |
Add two theorems `Submodule.prodEquivOfIsCompl_symm_apply` and `Submodule.prodEquivOfIsCompl_symm_add`, which are API for `Submodule.prodEquivOfIsCompl`.
We believe these theorems are useful; for example, we have used their statements in a [classification formalization project](https://github.com/LieLean/LowDimSolvClassification).
Co-authored by:
- [Viviana del Barco](https://github.com/vdelbarc)
- [Gustavo Infanti](https://github.com/GuQOliveira)
- [Exequiel Rivas](https://github.com/erivas)
---
I am not sure whether the `prodEquivOfIsCompl_symm_apply` theorem should be tagged with `@[simp]`; this might lead to confluence issues. Opinions are welcome!
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
10/0 |
Mathlib/LinearAlgebra/Projection.lean |
1 |
7 |
['PSchwahn', 'github-actions', 'joelriou', 'kckennylau'] |
joelriou assignee:joelriou |
1 |
316-53799 10 months ago |
316-84902 316 days ago |
73-43082 73 days |
| 27937 |
madvorak author:madvorak |
feat(Logic/Basic): `congr_heq₂` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-logic
|
6/0 |
Mathlib/Logic/Basic.lean |
1 |
8 |
['YaelDillies', 'fpvandoorn', 'github-actions', 'madvorak', 'vihdzp'] |
fpvandoorn assignee:fpvandoorn |
1 |
308-17738 10 months ago |
334-18523 334 days ago |
17-62721 17 days |
| 21950 |
erdOne author:erdOne |
feat(NumberTheory/Padics): the completion of `ℚ` at a finite place is `ℚ_[p]` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-number-theory
|
253/1 |
Mathlib.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/NumberTheory/Padics/HeightOneSpectrum.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/Topology/Algebra/Valued/WithVal.lean,Mathlib/Topology/Algebra/WithZeroMulInt.lean,Mathlib/Topology/Algebra/WithZeroTopology.lean |
7 |
33 |
['Ruben-VandeVelde', 'erdOne', 'faenuccio', 'github-actions', 'leanprover-community-bot-assistant', 'pechersky', 'smmercuri', 'xroblot'] |
nobody |
1 |
299-1252 9 months ago |
380-1189 380 days ago |
73-10883 73 days |
| 26330 |
Timeroot author:Timeroot |
feat: "Junk value" test file |
This PR continues the work from #25173.
Original PR: https://github.com/leanprover-community/mathlib4/pull/25173 |
awaiting-author
t-data
|
360/0 |
MathlibTest/Junk.lean |
1 |
17 |
['SnirBroshi', 'Timeroot', 'bryangingechen', 'github-actions', 'leanprover-community-bot-assistant', 'madvorak', 'pechersky', 'vihdzp'] |
pechersky assignee:pechersky |
2 |
295-44979 9 months ago |
295-44979 295 days ago |
48-73998 48 days |
| 27302 |
tristan-f-r author:tristan-f-r |
feat(Fintype/Quotient): finLiftOn₂ |
The combination of [`Quotient.finLiftOn`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Data/Fintype/Quotient.html#Quotient.finLiftOn) and [`liftOn₂`](https://leanprover-community.github.io/mathlib4_docs/Init/Core.html#Quotient.liftOn%E2%82%82).
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-data
|
19/0 |
Mathlib/Data/Fintype/Quotient.lean |
1 |
12 |
['github-actions', 'kckennylau', 'pechersky', 'tristan-f-r', 'vihdzp'] |
pechersky assignee:pechersky |
2 |
279-35739 9 months ago |
279-35739 279 days ago |
6-6533 6 days |
| 28925 |
grunweg author:grunweg |
chore: remove `linear_combination'` tactic |
When `linear_combination` was refactored in #15899, the old code was kept as the `linear_combination'` tactic, for easier migration. The consensus of the zulip discussion ([#mathlib4 > Narrowing the scope of `linear_combination` @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Narrowing.20the.20scope.20of.20.60linear_combination.60/near/470237816)) was to wait, and "revisit this once people have experienced the various tactics in practice".
One year later, the old tactic has almost no uses: it is unused in mathlib; [searching on github](https://github.com/search?q=linear_combination%27%20path%3A*.lean&type=code) yields 37 hits --- all of which are in various forks of mathlib. Thus, removing this tactic seems appropriate.
---
Do not merge before the zulip discussion has concluded!
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
file-removed
awaiting-zulip
|
0/564 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/LinearCombination'.lean,Mathlib/Tactic/Linter/UnusedTactic.lean,MathlibTest/linear_combination'.lean |
5 |
4 |
['euprunin', 'github-actions', 'grunweg', 'mathlib4-merge-conflict-bot'] |
nobody |
1 |
279-30815 9 months ago |
330-62612 330 days ago |
0-1 1 second |
| 28737 |
astrainfinita author:astrainfinita |
refactor: deprecate `MulEquivClass` |
This PR continues the work from #18806.
Original PR: https://github.com/leanprover-community/mathlib4/pull/18806 |
merge-conflict
awaiting-author
t-algebra
label:t-algebra$ |
67/77 |
Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/Group/Equiv/Basic.lean,Mathlib/Algebra/Group/Equiv/Defs.lean,Mathlib/Algebra/Group/Irreducible/Lemmas.lean,Mathlib/Algebra/Group/Subgroup/Map.lean,Mathlib/Algebra/Group/Submonoid/Operations.lean,Mathlib/Algebra/Group/Units/Equiv.lean,Mathlib/Algebra/GroupWithZero/Equiv.lean,Mathlib/Algebra/GroupWithZero/NonZeroDivisors.lean,Mathlib/Algebra/Module/Equiv/Defs.lean,Mathlib/Algebra/Order/CauSeq/Basic.lean,Mathlib/Algebra/Order/Hom/Monoid.lean,Mathlib/Algebra/Prime/Lemmas.lean,Mathlib/Algebra/Ring/Divisibility/Basic.lean,Mathlib/Algebra/Ring/Equiv.lean,Mathlib/Algebra/Star/MonoidHom.lean,Mathlib/Combinatorics/Additive/FreimanHom.lean,Mathlib/GroupTheory/GroupExtension/Defs.lean,Mathlib/GroupTheory/Submonoid/Center.lean,Mathlib/LinearAlgebra/FreeModule/Finite/CardQuotient.lean,Mathlib/RingTheory/Bialgebra/Equiv.lean,Mathlib/RingTheory/Ideal/Norm/AbsNorm.lean,Mathlib/RingTheory/Multiplicity.lean,Mathlib/RingTheory/UniqueFactorizationDomain/NormalizedFactors.lean,Mathlib/Topology/Algebra/ContinuousMonoidHom.lean,Mathlib/Topology/Algebra/InfiniteSum/Basic.lean |
26 |
20 |
['Vierkantor', 'alreadydone', 'astrainfinita', 'github-actions', 'grunweg', 'leanprover-bot', 'mathlib4-merge-conflict-bot'] |
Vierkantor assignee:Vierkantor |
1 |
267-21297 8 months ago |
330-67870 330 days ago |
2-31233 2 days |
| 9352 |
chenyili0818 author:chenyili0818 |
feat: arithmetic lemmas for `gradient` |
This file is based on Mathlib.Analysis.Calculus.Gradient.Basic, and describes the calculation properties
Co-authored-by: Ziyu Wang [tropicalfish910@gmail.com](mailto:tropicalfish910@gmail.com)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-analysis
|
404/0 |
Mathlib.lean,Mathlib/Analysis/Calculus/Gradient/Lemmas.lean |
2 |
31 |
['chenyili0818', 'github-actions', 'jcommelin', 'mathlib4-merge-conflict-bot', 'sgouezel', 'winstonyin'] |
nobody |
1 |
245-26391 8 months ago |
883-4840 883 days ago |
52-1358 52 days |
| 11890 |
adomani author:adomani |
feat: the terminal refine linter |
A linter that warns on usages of `refine` and `refine'` as a finishing tactic.
See this [Zulip discussion](https://leanprover.zulipchat.com/#narrow/stream/287929-mathlib4/topic/Usage.20of.20refine').
### Conclusion of the experiment
Systematic replacements of terminal `refine` with `exact` leads to an overall slow-down.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #15616 (disable the linter in downstream projects)
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-linter
awaiting-author
|
77/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Linter/TerminalRefineLinter.lean |
3 |
15 |
['adomani', 'github-actions', 'grunweg', 'joneugster', 'leanprover-bot', 'mathlib4-merge-conflict-bot', 'urkud'] |
nobody |
1 |
245-26260 8 months ago |
707-60766 707 days ago |
18-28993 18 days |
| 20924 |
tomaz1502 author:tomaz1502 |
feat(Computability/QueryComplexity): Oracle-based computation |
This PR adds the types and lemmas for oracle-based computation. In this model, computations are run on a monad which also counts the number of oracle queries executed. With it, it becomes possible to reason about the upper bound of the query complexity of algorithms. In the future, we could extend this work to include the necessary bits from information theory and probability to also reason about lower bounds on query complexity, like the work in https://github.com/girving/debate.
Zulip discussion: https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/.2318629.20runtime.20complexity.20of.20sorting.20a.20list
Co-authored-by: Geoffrey Irving <irving@naml.us>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
|
305/0 |
Mathlib.lean,Mathlib/Computability/QueryComplexity/Basic.lean,Mathlib/Computability/QueryComplexity/Defs.lean |
3 |
60 |
['eric-wieser', 'girving', 'github-actions', 'mathlib4-merge-conflict-bot', 'quangvdao', 'tomaz1502'] |
nobody |
1 |
245-25826 8 months ago |
514-47130 514 days ago |
27-32632 27 days |
| 21624 |
sinhp author:sinhp |
feat(CategoryTheory): The (closed) monoidal structure on the product category of families of (closed) monoidal categories |
Given a family of closed monoidal categories, we show that the product of these categories
is a closed monoidal category with the pointwise monoidal structure.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-category-theory
|
144/0 |
Mathlib.lean,Mathlib/CategoryTheory/Pi/Basic.lean,Mathlib/CategoryTheory/Pi/Monoidal.lean,Mathlib/CategoryTheory/Pi/MonoidalClosed.lean |
4 |
20 |
['TwoFX', 'YaelDillies', 'b-mehta', 'github-actions', 'jcommelin', 'mathlib4-merge-conflict-bot', 'sinhp'] |
nobody |
1 |
245-25816 8 months ago |
470-40058 470 days ago |
50-48872 50 days |
| 22159 |
shetzl author:shetzl |
feat: add definition of pushdown automata |
Add the definition of pushdown automata and their two acceptance conditions: acceptance based on empty stack and acceptance based on final state.
Co-authored-by: Tobias Leichtfried <tobias.leichtfried@tuwien.ac.at>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
awaiting-author
new-contributor
|
70/0 |
Mathlib.lean,Mathlib/Computability/PDA.lean |
2 |
35 |
['YaelDillies', 'github-actions', 'madvorak', 'mathlib4-merge-conflict-bot', 'shetzl'] |
nobody |
1 |
245-25684 8 months ago |
492-19697 492 days ago |
20-81248 20 days |
| 22919 |
plp127 author:plp127 |
feat(Data/Fintype/Pi): Make `Fintype` instance for `RelHom`s computable |
Makes the `Fintype` instance for rel homs computable.
See this [Zulip](https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Classical.20vs.20constructive.20logic.20in.20computation/near/496220816) message.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [x] depends on: #24748
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-data
|
178/44 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Coloring.lean,Mathlib/Combinatorics/SimpleGraph/Maps.lean,Mathlib/Data/Fintype/CardEmbedding.lean,Mathlib/Data/Fintype/Pi.lean |
5 |
31 |
['IvanRenison', 'b-mehta', 'eric-wieser', 'fpvandoorn', 'github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'plp127'] |
b-mehta assignee:b-mehta |
1 |
245-25658 8 months ago |
419-38929 419 days ago |
71-41735 71 days |
| 26914 |
quangvdao author:quangvdao |
feat(Data/PFunctor/Univariate): more definitions for univariate `PFunctor` |
This PR defines several basic definitions of `PFunctor`, including zero, one, constants, monomials, coproduct (sum), product, sigma, pi, tensor product, universe lifting, and equivalence.
We also add: (1) simple lemmas connecting the basic definitions, (2) an automatically derived ext lemma for `PFunctor` via `@[ext]` attribute
Some things I'm not clear on:
- I define `HAdd` and `HMul` instances for coproduct and product of poly functors having different universe levels. Should I also define `Add` and `Mul` instances for poly functors having the same universe level?
- Is it ok to define notation for tensor product, i.e. `@[inherit_doc] scoped infixr:80 " ⊗ " => tensor`? I'm worried it might clash with other notation.
- Need a double-check on the priority of notation.
Some future definitions to add:
- Various equivalences arising from arithmetic identities, e.g., `P + 0 ≃ₚ P`.
- Definitions of Lenses and Charts (each of them will be a file or even a folder)
- Exponential objects (corresponding to both `prod` and `tensor`)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
|
144/5 |
Mathlib/Data/PFunctor/Univariate/Basic.lean |
1 |
20 |
['alexkeizer', 'eric-wieser', 'github-actions', 'mathlib4-merge-conflict-bot', 'quangvdao'] |
eric-wieser assignee:eric-wieser |
1 |
245-24974 8 months ago |
245-24975 245 days ago |
133-24576 133 days |
| 27163 |
pechersky author:pechersky |
feat(Topology/ValuativeRel): of and to basis of compatible valuations |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [x] depends on: #30262 |
t-number-theory
t-algebra
merge-conflict
awaiting-author
t-topology
label:t-algebra$ |
229/62 |
Mathlib/NumberTheory/LocalField/Basic.lean,Mathlib/Order/Filter/Bases/Basic.lean,Mathlib/Topology/Algebra/Valued/ValuativeRel.lean |
3 |
73 |
['erdOne', 'github-actions', 'kckennylau', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'pechersky', 'smmercuri'] |
alreadydone assignee:alreadydone |
1 |
245-24957 8 months ago |
246-56748 246 days ago |
85-75885 85 days |
| 28325 |
pechersky author:pechersky |
feat(WithZeroTopology): `locallyCompactSpace_iff_locallyFiniteOrder_units` |
On the way to golf/generalize the proof that
locally compact valued fields have locally finite valuation groups as embodied in
`Valued.integer.locallyFiniteOrder_units_mrange_of_isCompact_integer` ]
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
t-order
large-import
|
81/2 |
Mathlib/Topology/Algebra/GroupWithZero.lean,Mathlib/Topology/Algebra/WithZeroTopology.lean,Mathlib/Topology/Compactness/Compact.lean |
3 |
13 |
['erdOne', 'github-actions', 'kckennylau', 'mathlib4-merge-conflict-bot', 'ocfnash'] |
PatrickMassot assignee:PatrickMassot |
1 |
245-24662 8 months ago |
249-74945 249 days ago |
93-44257 93 days |
| 28871 |
JaafarTanoukhi author:JaafarTanoukhi |
feat(Combinatorics/Digraph): Tournaments |
Define orientations and tournaments. Related to #26771.
Co-authored-by: Rida Hamadani <mridahamadani@gmail.com>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-combinatorics
new-contributor
|
62/0 |
Mathlib.lean,Mathlib/Combinatorics/Digraph/Orientation.lean,Mathlib/Combinatorics/Digraph/Tournament.lean |
3 |
6 |
['JaafarTanoukhi', 'Rida-Hamadani', 'SnirBroshi', 'github-actions', 'mathlib4-merge-conflict-bot'] |
kmill assignee:kmill |
1 |
245-24516 8 months ago |
245-24517 245 days ago |
71-37436 71 days |
| 11800 |
JADekker author:JADekker |
feat: KappaLindelöf spaces |
Define KappaLindelöf spaces by following the first one-third of the API for Lindelöf spaces. The remainder will be added in a future PR.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
please-adopt
merge-conflict
t-topology
awaiting-zulip
|
301/2 |
Mathlib.lean,Mathlib/Topology/Compactness/KappaLindelof.lean,Mathlib/Topology/Compactness/Lindelof.lean |
3 |
38 |
['ADedecker', 'JADekker', 'PatrickMassot', 'StevenClontz', 'adomani', 'github-actions', 'grunweg', 'kim-em', 'urkud'] |
nobody |
1 |
244-84096 8 months ago |
720-17978 720 days ago |
123-25636 123 days |
| 26310 |
kckennylau author:kckennylau |
feat: binary forms |
This PR provides the basic definition of binary forms, which are homogeneous polynomials in two variables.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #26312
- [ ] depends on: #26313
- [ ] depends on: #26314
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
label:t-algebra$ |
73/0 |
Mathlib.lean,Mathlib/RingTheory/MvPolynomial/BinaryForm.lean |
2 |
14 |
['MichaelStollBayreuth', 'github-actions', 'kckennylau', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'ocfnash'] |
ocfnash assignee:ocfnash |
1 |
244-83508 8 months ago |
336-80529 336 days ago |
7-9588 7 days |
| 24514 |
b-mehta author:b-mehta |
chore(Int/GCD): use fuel in xgcd |
Modify the definition of xgcd to use fuel recursion, to allow it to be reduced in the kernel. As a consequence, this means the evaluation of field operations in ZMod p become provable by `rfl` and `decide`.
Zulip discussion: https://leanprover.zulipchat.com/#narrow/channel/270676-lean4/topic/opaque.20recursion.20definitions.20break.20mergeSort.20decidability
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-data
merge-conflict
|
44/22 |
Mathlib/Data/Int/GCD.lean |
1 |
6 |
['astrainfinita', 'b-mehta', 'eric-wieser', 'github-actions', 'mathlib4-merge-conflict-bot', 'nomeata', 'urkud'] |
nobody |
1 |
237-12916 7 months ago |
388-52794 388 days ago |
58-34020 58 days |
| 28057 |
plp127 author:plp127 |
feat(SuccOrder): simp lemma to refold `Order.succ` and `Order.pred` |
Adds `SuccOrder.succ_eq_succ` and `PredOrder.pred_eq_pred` to refold `SuccOrder.succ` and `PredOrder.pred` into `Order.succ` and `Order.pred`. These lemmas are marked `@[simp]`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-order
merge-conflict
|
8/2 |
Mathlib/Order/SuccPred/Basic.lean |
1 |
4 |
['YaelDillies', 'github-actions', 'mathlib4-merge-conflict-bot', 'plp127', 'vihdzp'] |
bryangingechen assignee:bryangingechen |
1 |
228-46045 7 months ago |
305-61753 305 days ago |
44-10271 44 days |
| 26912 |
pechersky author:pechersky |
chore(Algebra/Ring/Subring): simp tag `Subring.smul_def` |
s-multiplying by a subtype is easiest to manipulate when both terms are in the ambient type. Many places that had to use the _def lemma for a rewrite, or to include it in a simp set, no longer have to.
Ported from #25308
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
I found this being not-simp frustrating when talking about submodules over a valuation subring. |
merge-conflict
t-algebra
label:t-algebra$ |
67/66 |
Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Field/Subfield/Basic.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Group/Submonoid/MulAction.lean,Mathlib/Algebra/Module/LocalizedModule/Basic.lean,Mathlib/Algebra/Module/LocalizedModule/Exact.lean,Mathlib/Algebra/Module/LocalizedModule/IsLocalization.lean,Mathlib/Algebra/Module/LocalizedModule/Submodule.lean,Mathlib/Algebra/Ring/Periodic.lean,Mathlib/Algebra/Ring/Subring/Basic.lean,Mathlib/Algebra/Ring/Subsemiring/Basic.lean,Mathlib/Analysis/CStarAlgebra/Basic.lean,Mathlib/FieldTheory/KummerExtension.lean,Mathlib/GroupTheory/GroupAction/Defs.lean,Mathlib/GroupTheory/GroupAction/MultiplePrimitivity.lean,Mathlib/GroupTheory/GroupAction/MultipleTransitivity.lean,Mathlib/GroupTheory/GroupAction/SubMulAction/OfFixingSubgroup.lean,Mathlib/GroupTheory/GroupAction/SubMulAction/OfStabilizer.lean,Mathlib/LinearAlgebra/RootSystem/Irreducible.lean,Mathlib/LinearAlgebra/RootSystem/WeylGroup.lean,Mathlib/RingTheory/Etale/Kaehler.lean,Mathlib/RingTheory/Ideal/Over.lean,Mathlib/RingTheory/LocalProperties/Projective.lean,Mathlib/RingTheory/Localization/InvSubmonoid.lean,Mathlib/RingTheory/OreLocalization/Basic.lean |
25 |
26 |
['artie2000', 'eric-wieser', 'github-actions', 'j-loreaux', 'kckennylau', 'leanprover-bot', 'leanprover-radar', 'mathlib4-merge-conflict-bot', 'pechersky', 'wrenna-robson'] |
joelriou assignee:joelriou |
1 |
218-56681 7 months ago |
240-6230 240 days ago |
60-67125 60 days |
| 33381 |
urkud author:urkud |
feat: add a version of the Schwarz lemma |
Add a version of the Schwarz lemma that is midway between the original lemma
and Pick's version.
Use it to show that a function that is separately holomorphic on a polydisc
and is bounded on this polydisc must be continuous on it.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [ ] depends on: #33368
- [x] depends on: #33362 |
t-analysis
blocked-by-other-PR
merge-conflict
|
475/91 |
Mathlib.lean,Mathlib/Analysis/Complex/Schwarz.lean,Mathlib/Analysis/Complex/UnitDisc/Basic.lean,Mathlib/Analysis/Complex/UnitDisc/Schwarz.lean,Mathlib/Analysis/Complex/UnitDisc/Shift.lean |
5 |
22 |
['girving', 'github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'urkud'] |
nobody |
1 |
203-33087 6 months ago |
205-1567 205 days ago |
0-947 15 minutes |
| 17176 |
arulandu author:arulandu |
feat: integrals and integrability with .re |
Lemmas for swapping order of .re and integration/integrability.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
new-contributor
t-measure-probability
please-adopt
|
49/0 |
Mathlib/MeasureTheory/Function/L1Space.lean,Mathlib/MeasureTheory/Integral/IntegrableOn.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral.lean,Mathlib/MeasureTheory/Integral/SetIntegral.lean |
4 |
32 |
['EtienneC30', 'arulandu', 'github-actions', 'loefflerd'] |
nobody |
1 |
197-67661 6 months ago |
645-28498 645 days ago |
9-73631 9 days |
| 25905 |
mans0954 author:mans0954 |
feat(RingTheory/Polynomial/SmallDegreeVieta): polynomial versions of results in Algebra.QuadraticDiscriminant |
This PR continues the work from #25605.
Original PR: https://github.com/leanprover-community/mathlib4/pull/25605 |
merge-conflict
t-ring-theory
please-adopt
|
77/8 |
Mathlib/Algebra/Polynomial/Coeff.lean,Mathlib/RingTheory/Polynomial/SmallDegreeVieta.lean |
2 |
47 |
['chrisflav', 'github-actions', 'kckennylau', 'mans0954', 'mathlib4-merge-conflict-bot', 'ocfnash'] |
chrisflav assignee:chrisflav |
1 |
192-56554 6 months ago |
318-84933 318 days ago |
82-6504 82 days |
| 12934 |
grunweg author:grunweg |
chore: replace more uses of > or ≥ by < or ≤ |
These were flagged by the linter in https://github.com/leanprover-community/mathlib4/pull/12879: it is easy to simple avoid > or ≥ in hypotheses or haves.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
help-wanted
|
41/42 |
Archive/Imo/Imo1962Q1.lean,Archive/Imo/Imo1988Q6.lean,Archive/Imo/Imo1994Q1.lean,Archive/Imo/Imo2005Q3.lean,Archive/Imo/Imo2006Q3.lean,Archive/Imo/Imo2008Q2.lean,Archive/Imo/Imo2008Q3.lean,Archive/Imo/Imo2019Q4.lean,Archive/Sensitivity.lean,Archive/Wiedijk100Theorems/CubingACube.lean,Mathlib/Tactic/Linarith/Datatypes.lean,test/cancel_denoms.lean,test/congr.lean,test/interval_cases.lean,test/observe.lean |
15 |
12 |
['YaelDillies', 'adomani', 'github-actions', 'grunweg', 'jcommelin', 'urkud'] |
nobody |
1 |
191-37969 6 months ago |
796-7394 796 days ago |
1-73101 1 day |
| 29610 |
llllvvuu author:llllvvuu |
feat(LinearAlgebra): define LinearMap.Eigenbasis |
Some theorems are left TODO for follow-up work.
The definition is from @eric-wieser ([#Is there code for X? > diagonalizable linear maps @ 💬](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/diagonalizable.20linear.20maps/near/539163222)).
Co-authored-by: Aristotle Harmonic <aristotle-harmonic@harmonic.fun>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #29420 (golfs some `[Nontrivial R]` assumptions)
- [x] depends on: #29791
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
awaiting-author
label:t-algebra$ |
455/5 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/Spectrum.lean,Mathlib/LinearAlgebra/Eigenbasis.lean,Mathlib/LinearAlgebra/FreeModule/PID.lean,Mathlib/Order/CompleteLattice/Basic.lean |
5 |
31 |
['github-actions', 'joelriou', 'kckennylau', 'llllvvuu', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
joelriou assignee:joelriou |
1 |
188-76378 6 months ago |
245-23914 245 days ago |
20-33900 20 days |
| 33493 |
michelsol author:michelsol |
feat(RingTheory/Polynomial): An explicit formula for the Chebyshev polynomials of the first kind |
Adds the following explicit formula on the Chebyshev polynomial of the first kind of order n.
${ T_{n}(x)\ =\ \sum \limits _{k=0}^{\lfloor {\frac {n}{2}}\rfloor } {\binom {n}{2k}} \left(\ X^{2}-1\ \right)^{k}\ X^{n-2k}}$
This explicit formula can be found [here](https://en.wikipedia.org/wiki/Chebyshev_polynomials#Explicit_expressions). There is a proof using complex numbers but it only works if the ring R = ℂ.
The proof here is by induction and works in a commutative ring R.
Mathlib seems to extend the definition of Chebyshev polynomials for $n \in \mathbb{Z}$ but this would make the formula more cumbersome with `n.natAbs` in place of `n`'s, so I expressed it on `n : ℕ` directly.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
awaiting-author
|
51/1 |
Mathlib/RingTheory/Polynomial/Chebyshev.lean |
1 |
8 |
['YuvalFilmus', 'erdOne', 'github-actions', 'metakunt', 'michelsol'] |
chrisflav assignee:chrisflav |
1 |
164-48369 5 months ago |
164-48369 164 days ago |
35-16104 35 days |
| 11500 |
mcdoll author:mcdoll |
refactor(Topology/Algebra/Module/WeakDual): Clean up |
- Move `Dual` and `dualPairing` lower in the import-hierachy
- deduplicate `dualPairing`
- Bundle continuity statements to `CLM`s.
- Make `WeakDual` and `WeakSpace` reducible
- Remove `refine'` in favor of `refine`
---
Cleaning up `Analysis/NormedSpace/WeakDual` will be done in a second PR
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-topology
|
227/179 |
Mathlib.lean,Mathlib/Analysis/Fourier/RiemannLebesgueLemma.lean,Mathlib/Analysis/InnerProductSpace/Adjoint.lean,Mathlib/Analysis/InnerProductSpace/Dual.lean,Mathlib/Analysis/LocallyConvex/Polar.lean,Mathlib/Analysis/NormedSpace/Dual.lean,Mathlib/Analysis/NormedSpace/WeakDual.lean,Mathlib/Analysis/VonNeumannAlgebra/Basic.lean,Mathlib/MeasureTheory/Function/AEEqOfIntegral.lean,Mathlib/MeasureTheory/Measure/FiniteMeasure.lean,Mathlib/Topology/Algebra/Module/CharacterSpace.lean,Mathlib/Topology/Algebra/Module/Dual.lean,Mathlib/Topology/Algebra/Module/WeakDual.lean,docs/overview.yaml,docs/undergrad.yaml |
15 |
16 |
['ADedecker', 'grunweg', 'j-loreaux', 'kkytola', 'mathlib-bors', 'mcdoll', 'urkud'] |
nobody |
2 |
157-1922 5 months ago |
806-1122 806 days ago |
46-5571 46 days |
| 35134 |
fpvandoorn author:fpvandoorn |
feat(translate): print constant names with hover info |
Part of #34846.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
awaiting-author
merge-conflict
|
46/28 |
Mathlib/Tactic/Translate/Core.lean,MathlibTest/toAdditive.lean |
2 |
6 |
['JovanGerb', 'github-actions', 'mathlib-merge-conflicts'] |
JovanGerb assignee:JovanGerb |
1 |
156-80242 5 months ago |
158-72698 158 days ago |
2-13760 2 days |
| 31766 |
SuccessMoses author:SuccessMoses |
feat(Topology/EMetricSpace): continuity of arc length |
fixes half of #31751
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-topology
awaiting-author
merge-conflict
|
396/0 |
Mathlib.lean,Mathlib/Topology/EMetricSpace/ArcLength.lean,Mathlib/Topology/EMetricSpace/BoundedVariation.lean |
3 |
40 |
['SnirBroshi', 'SuccessMoses', 'alreadydone', 'github-actions', 'grunweg', 'j-loreaux', 'mathlib-merge-conflicts'] |
nobody |
1 |
148-60723 4 months ago |
224-61593 224 days ago |
2-77182 2 days |
| 35494 |
Timeroot author:Timeroot |
feat(Topology/Perfect): simp frontier_singleton |
Add simp lemma
```
theorem frontier_singleton {X : Type*} [TopologicalSpace X] [T1Space X]
[PerfectSpace X] (p : X) : frontier {p} = {p}
```
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
awaiting-author
|
4/0 |
Mathlib/Topology/Perfect.lean |
1 |
4 |
['Timeroot', 'github-actions', 'urkud', 'vihdzp'] |
urkud assignee:urkud |
1 |
147-83900 4 months ago |
148-43036 148 days ago |
5-41003 5 days |
| 30431 |
kckennylau author:kckennylau |
feat(RingTheory): a homogeneous submodule is the span of its homogeneous elements |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
merge-conflict
|
22/0 |
Mathlib/RingTheory/GradedAlgebra/Homogeneous/Ideal.lean,Mathlib/RingTheory/GradedAlgebra/Homogeneous/Submodule.lean |
2 |
9 |
['alreadydone', 'github-actions', 'kckennylau', 'mariainesdff', 'mathlib-merge-conflicts'] |
mariainesdff assignee:mariainesdff |
1 |
138-69042 4 months ago |
260-69903 260 days ago |
23-31743 23 days |
| 17627 |
hrmacbeth author:hrmacbeth |
feat: universal properties of vector bundle constructions |
Characterizations for the smoothness of maps into the total spaces of (1) the direct sum of two vector bundles; (2) the pullback of a vector bundle.
This gap in the library was exposed by #17358.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #22804
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-differential-geometry
|
311/9 |
Mathlib/Data/Bundle.lean,Mathlib/Geometry/Manifold/VectorBundle/Basic.lean,Mathlib/Geometry/Manifold/VectorBundle/Pullback.lean,Mathlib/Topology/FiberBundle/Constructions.lean |
4 |
26 |
['PatrickMassot', 'fpvandoorn', 'github-actions', 'grunweg', 'hrmacbeth', 'j-loreaux', 'leanprover-community-bot-assistant', 'mathlib-bors', 'mathlib4-dependent-issues-bot', 'sgouezel'] |
grunweg assignee:grunweg |
1 |
138-9034 4 months ago |
398-8773 398 days ago |
91-68315 91 days |
| 19275 |
eric-wieser author:eric-wieser |
fix: if nolint files change, do a full rebuild |
Otherwise CI will succeed when removing entries from the file, but fail later when someone changes something unrelated.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
8/0 |
lakefile.lean |
1 |
22 |
['YaelDillies', 'adomani', 'eric-wieser', 'fpvandoorn', 'github-actions', 'grunweg', 'mathlib-bors'] |
nobody |
1 |
138-9017 4 months ago |
609-49652 609 days ago |
0-214 3 minutes |
| 33592 |
nielstron author:nielstron |
feat(Computability/ContextFreeGrammar): mapping between two types of nonterminal symbols |
This PR picks up https://github.com/leanprover-community/mathlib4/pull/15895 and resolves the failing lemma by redefining Good symbols.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
I checked that https://github.com/leanprover-community/mathlib4/pull/13514 builds correctly when based on this build. PR for that is #33599
This is my first contribution please let me know of any changes I should outline.
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-computability
new-contributor
|
160/0 |
Mathlib/Computability/ContextFreeGrammar.lean |
1 |
34 |
['YaelDillies', 'github-actions', 'madvorak', 'nielstron'] |
nobody |
1 |
137-84433 4 months ago |
187-26560 187 days ago |
10-68503 10 days |
| 27534 |
PierreQuinton author:PierreQuinton |
feat: a typeclass for `sSup`/`sInf` to be lawful |
Adds lawful infima and suprema type classes.
A preorder with lawful suprema: whenever a set has a least upper bound, `sSup` returns a least upper bound for that set.
A preorder with lawful infima: whenever a set has a greatest lower bound, `sInf` returns a greastest lower bound for that set.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-order
|
121/8 |
Mathlib.lean,Mathlib/Order/CompleteLattice/Defs.lean,Mathlib/Order/LawfulSupInf.lean |
3 |
26 |
['PierreQuinton', 'YaelDillies', 'github-actions', 'mathlib4-merge-conflict-bot', 'plp127', 'vihdzp'] |
nobody |
1 |
129-80137 4 months ago |
245-24812 245 days ago |
114-38193 114 days |
| 30872 |
rudynicolop author:rudynicolop |
feat(Computability/NFA): NFA closure under concatenation |
This PR proves that regular languages are closed under concatenation via a direct construction on `NFA`s without `εNFA` nor ε-transitions. The main new definitions and results include:
- `M1.concat M2`, the concatenation of `NFA`s `M1` and `M2`, a direct construction without ε-transitions.
- Theorem `accepts_concat : (M1.concat M2).accepts = M1.accepts * M2.accepts`, showing the correctness of the construction.
- Theorem `IsRegular.mul`, showing that regular languages are closed under concatenation.
---
- [x] depends on: #31038
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-computability
new-contributor
awaiting-author
|
104/7 |
Mathlib/Computability/NFA.lean |
1 |
67 |
['YaelDillies', 'ctchou', 'eric-wieser', 'github-actions', 'lambda-fairy', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'rudynicolop'] |
nobody |
2 |
129-80071 4 months ago |
173-68312 173 days ago |
59-63981 59 days |
| 35524 |
grunweg author:grunweg |
feat: text-based linter against \t followed by tactic mode |
Wait for the zulip discussion to converge. **If** there is consensus in favour of this change, summarise the motivation here.
[zulip discuss](https://leanprover.zulipchat.com/#narrow/channel/345428-mathlib-reviewers/topic/proposal.3A.20no.20more.20use.20of.20.60.E2.96.B8.60.20in.20Mathlib.3F/with/574680826)
---
There are currently 80 remaining exceptions in mathlib: ideally, these would get fixed before merging this.
Works best when combined with #35523.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
awaiting-zulip
merge-conflict
|
23/2 |
Mathlib/Tactic/Linter/TextBased.lean |
1 |
5 |
['github-actions', 'grunweg', 'joneugster', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
1 |
126-56829 4 months ago |
153-17991 153 days ago |
0-187 3 minutes |
| 26078 |
kckennylau author:kckennylau |
feat(AlgebraicGeometry): add x, y, px, py for points on elliptic curves |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Split from #25218.
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-algebraic-geometry
|
44/0 |
Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Point.lean |
1 |
12 |
['MichaelStollBayreuth', 'Multramate', 'acmepjz', 'dagurtomas', 'github-actions', 'kckennylau'] |
nobody |
1 |
125-78364 4 months ago |
334-84812 334 days ago |
64-11252 64 days |
| 20719 |
gio256 author:gio256 |
feat(AlgebraicTopology): delaborators for truncated simplicial notations |
We add delaborators for the following notations, introduced in #20688:
- `⦋m⦌ₙ`, which denotes the `m`-dimensional simplex in the `n`-truncated simplex category.
- `X _⦋m⦌ₙ`, which denotes the `m`-th term of an `n`-truncated simplicial object `X`.
- `X ^⦋m⦌ₙ`, which denotes the `m`-th term of an `n`-truncated cosimplicial object `X`.
If `pp.proofs` is set to `true`, we also pretty-print the proof `p : m ≤ n` for all three notations as `⦋m, p⦌ₙ`, `X _⦋m, p⦌ₙ`, and `X ^⦋m, p⦌ₙ`, respectively.
Credit to @kmill for one piece of code and much metaprogramming inspiration.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #20688
- [x] depends on: #23018
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebraic-topology
infinity-cosmos
t-meta
please-adopt
will-close-soon
|
525/33 |
Mathlib.lean,Mathlib/AlgebraicTopology/SimplexCategory/Basic.lean,Mathlib/AlgebraicTopology/SimplexCategory/Defs.lean,Mathlib/AlgebraicTopology/SimplicialObject/Basic.lean,Mathlib/Tactic.lean,Mathlib/Tactic/SimplexCategory.lean,Mathlib/Util/Superscript.lean,MathlibTest/SimplexCategory.lean,MathlibTest/SimplicialObject.lean,MathlibTest/superscript.lean,scripts/noshake.json |
11 |
24 |
['eric-wieser', 'gio256', 'github-actions', 'joneugster', 'kim-em', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot'] |
nobody |
1 |
117-16834 3 months ago |
366-64460 366 days ago |
88-84229 88 days |
| 21476 |
grunweg author:grunweg |
feat(lint-style): enable running on downstream projects |
Enable lint-style to run on downstream projects, by making the following modifications:
- allow passing an explicit list of libraries to lint: if nothing is passed, it lints `Mathlib`, `Archive` and `Counterexamples` (as before); otherwise, it lints precisely the passed modules
- only check init imports, undocumented scripts and the errors from `lint-style.py` when linting Mathlib
- make the style exceptions file configurable and optional: using the `nolints-file` flag, the exceptions file can be configured. If the flag is omitted, we try to find a file at `scripts/nolints-style.txt` --- and otherwise proceed with no style exceptions.
This means mathlib can continue unchanged, and downstream projects can either add an explicit exceptions file, or proceed without any exceptions.
After this PR, one should be able to run lint-style on a downstream project by `lake exe lint-style ProjectName`.
Prompted by [this zulip discussion](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/lint-style.20for.20downstream.20libraries).
---
- [x] depends on: #24570
- [x] depends on: #24953
(I did not test the last part.)
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-linter
awaiting-author
please-adopt
|
58/19 |
Mathlib/Tactic/Linter/TextBased.lean,scripts/lint-style.lean |
2 |
21 |
['Vierkantor', 'adomani', 'github-actions', 'grunweg', 'joneugster', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot'] |
nobody |
1 |
117-16283 3 months ago |
431-81388 431 days ago |
43-17409 43 days |
| 37111 |
tannerduve author:tannerduve |
feat(Computability): add Nat.PrimrecIn and PrimrecIn |
- Add `Nat.PrimrecIn`: primitive recursive functions relative to a set of oracles
- Add `PrimrecIn`: lifts `Nat.PrimrecIn` to `Primcodable` types
A `PrimrecIn` version of `RecursiveIn.iff_nat` (i.e., `PrimrecIn O (f : ℕ → ℕ) ↔ Nat.PrimrecIn O f`) is left as future work as it requires proving `Nat.PrimrecIn O Nat.pred`, which needs additional API for `Nat.PrimrecIn`.
---
Split out from #34937 as requested in review.
- [x] depends on: #37061 |
t-computability
new-contributor
awaiting-author
|
24/0 |
Mathlib/Computability/RecursiveIn.lean |
1 |
14 |
['Komyyy', 'bryangingechen', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'tannerduve'] |
nobody |
1 |
102-65341 3 months ago |
103-78200 103 days ago |
1-79421 1 day |
| 32889 |
artie2000 author:artie2000 |
feat(Algebra): forgetful lemmas for `map` and `comap` on substructures |
* Standardise the form of forgetful lemmas for `map` and `comap` (ie, `(co)map_toSubfoo`)
* Add missing lemmas of this form
* Mark all such lemmas as `simp`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #21031
[](https://gitpod.io/from-referrer/)
|
t-algebra
awaiting-author
merge-conflict
label:t-algebra$ |
72/17 |
Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Group/Subgroup/Map.lean,Mathlib/Algebra/Module/Submodule/Map.lean,Mathlib/Algebra/Ring/Subsemiring/Basic.lean,Mathlib/Algebra/Star/Subalgebra.lean |
6 |
30 |
['YaelDillies', 'artie2000', 'github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'vihdzp'] |
nobody |
1 |
99-17230 3 months ago |
216-63601 216 days ago |
2-56660 2 days |
| 6777 |
adomani author:adomani |
chore(Co*variantClass): replace eta-expanded (· * ·), (· + ·), (· ≤ ·), (· < ·) |
Replace `CovariantClass X X (· * ·) (· ≤ ·)` with -> `CovariantClass X X HMul.hMul LE.le` and similarly for `HAdd`, `LT`, `Contravariant`.
This PR is inspired by [Issue #6646](https://github.com/leanprover-community/mathlib4/issues/6646) and, more specifically, [this comment](https://github.com/leanprover-community/mathlib4/issues/6646#issuecomment-1692792066).
Note that https://github.com/leanprover/lean4/pull/2267 would make this unnecessary
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
```bash
# First sed command:
# the first captured pattern is `Co*variantClass <type> <type> `
# the second captured pattern is `<type>`
# the third captured pattern is `+` or `*`
# the fourth captured pattern is `<` or `≤`
# a match for `Co*variantClass <type> <type> (· <op> ·) (· <rel> ·)` becomes
# `Co*variantClass <type> <type> replaceop<op> replaceop<rel>`
# Second sed command: similar to the first, but looks for `(Function.swap (· <op> ·))`
sed -i '
s=\(Co[ntra]*variantClass \(..*\) \2 \)(· *\([+*]\) *·) (· *\([<≤]\) *·)=\1replaceop\3 replaceop\4=g
s=\(Co[ntra]*variantClass \(..*\) \2 \)(\([Functio\.swap ]*\)(· *\([+*]\) *·)) (· *\([<≤]\) *·)=\1(\3replaceop\4) replaceop\5=g
s=replaceop+=HAdd.hAdd=g
s=replaceop\*=HMul.hMul=g
s=replaceop<=LT.lt=g
s=replaceop≤=LE.le=g
s=\(Co[ntra]*variantClass N N\) (· \* ·) r=\1 HMul.hMul r=g
s=\(Co[ntra]*variantClass N N (swap μ)\) (· ≤ ·)=\1 LE.le=g
s=\(Co[ntra]*variantClass N N\) (swap (· \* ·)) r=\1 (swap HMul.hMul) r=g
s=\(CovariantClass (Filter α) (Filter α)\) (· / ·) (· ≤ ·)=\1 HDiv.hDiv LE.le=g
s=\(CovariantClass (Filter α) (Filter α)\) (swap (· / ·)) (· ≤ ·)=\1 (swap HDiv.hDiv) LE.le=g
s=\(Co[ntra]*variantClass .* (fun x y .> . \* .)\) (· ≤ ·)=\1 LE.le=g
s=\(Co[ntra]*variantClass .* (fun x y .> . \* .)\) (· < ·)=\1 LT.lt=g
s=\(Co[ntra]*variantClass [^}]*\) (· ≤ ·)=\1 LE.le=g
s=\(CovariantClass .* (Filter β)\) (· • ·) LE.le=\1 HSMul.hSMul LE.le=g
' $(git ls-files '*.lean')
```
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
703/678 |
Counterexamples/ZeroDivisorsInAddMonoidAlgebras.lean,Mathlib/Algebra/BigOperators/Basic.lean,Mathlib/Algebra/Bounds.lean,Mathlib/Algebra/CovariantAndContravariant.lean,Mathlib/Algebra/DirectSum/Internal.lean,Mathlib/Algebra/Group/UniqueProds.lean,Mathlib/Algebra/GroupPower/Order.lean,Mathlib/Algebra/MonoidAlgebra/Degree.lean,Mathlib/Algebra/Order/Archimedean.lean,Mathlib/Algebra/Order/Group/Abs.lean,Mathlib/Algebra/Order/Group/Defs.lean,Mathlib/Algebra/Order/Group/DenselyOrdered.lean,Mathlib/Algebra/Order/Group/MinMax.lean,Mathlib/Algebra/Order/Group/OrderIso.lean,Mathlib/Algebra/Order/Hom/Monoid.lean,Mathlib/Algebra/Order/Interval.lean,Mathlib/Algebra/Order/Kleene.lean,Mathlib/Algebra/Order/LatticeGroup.lean,Mathlib/Algebra/Order/Module.lean,Mathlib/Algebra/Order/Monoid/Basic.lean,Mathlib/Algebra/Order/Monoid/Cancel/Defs.lean,Mathlib/Algebra/Order/Monoid/Canonical/Defs.lean,Mathlib/Algebra/Order/Monoid/Defs.lean,Mathlib/Algebra/Order/Monoid/Lemmas.lean,Mathlib/Algebra/Order/Monoid/MinMax.lean,Mathlib/Algebra/Order/Monoid/NatCast.lean,Mathlib/Algebra/Order/Monoid/OrderDual.lean,Mathlib/Algebra/Order/Monoid/Prod.lean,Mathlib/Algebra/Order/Monoid/WithTop.lean,Mathlib/Algebra/Order/Monoid/WithZero/Basic.lean,Mathlib/Algebra/Order/Monoid/WithZero/Defs.lean,Mathlib/Algebra/Order/Nonneg/Ring.lean,Mathlib/Algebra/Order/Pointwise.lean,Mathlib/Algebra/Order/Positive/Ring.lean,Mathlib/Algebra/Order/Ring/Canonical.lean,Mathlib/Algebra/Order/Ring/Defs.lean,Mathlib/Algebra/Order/Ring/Lemmas.lean,Mathlib/Algebra/Order/Sub/Basic.lean,Mathlib/Algebra/Order/Sub/Canonical.lean,Mathlib/Algebra/Order/Sub/Defs.lean,Mathlib/Algebra/Order/WithZero.lean,Mathlib/Algebra/Parity.lean,Mathlib/Algebra/Star/Order.lean,Mathlib/Algebra/Tropical/Basic.lean,Mathlib/Analysis/Normed/Order/Lattice.lean,Mathlib/Data/DFinsupp/Lex.lean,Mathlib/Data/DFinsupp/Order.lean,Mathlib/Data/Finset/Fold.lean,Mathlib/Data/Finsupp/Lex.lean,Mathlib/Data/Finsupp/Order.lean,Mathlib/Data/List/BigOperators/Basic.lean,Mathlib/Data/List/BigOperators/Lemmas.lean,Mathlib/Data/Multiset/Basic.lean,Mathlib/Data/Nat/Cast/Order.lean,Mathlib/Data/PNat/Basic.lean,Mathlib/Data/Real/ENNReal.lean,Mathlib/Data/Real/NNReal.lean,Mathlib/Data/Set/Semiring.lean,Mathlib/Data/Sign.lean,Mathlib/MeasureTheory/Function/LpOrder.lean,Mathlib/MeasureTheory/Function/SimpleFuncDenseLp.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/VectorMeasure.lean,Mathlib/Order/ConditionallyCompleteLattice/Group.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/Pointwise.lean,Mathlib/Probability/Martingale/Basic.lean,Mathlib/Probability/Process/Stopping.lean,Mathlib/RingTheory/GradedAlgebra/Basic.lean,Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Game/Basic.lean,Mathlib/SetTheory/Game/PGame.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Basic.lean,Mathlib/SetTheory/Ordinal/NaturalOps.lean,Mathlib/Tactic/GCongr/Core.lean,Mathlib/Tactic/Positivity/Basic.lean,Mathlib/Topology/ContinuousFunction/Algebra.lean,lean-toolchain,test/Recall.lean,test/propose.lean |
81 |
37 |
['adomani', 'alreadydone', 'digama0', 'eric-wieser', 'ericrbg', 'jcommelin', 'leanprover-bot', 'sgouezel', 'vihdzp'] |
nobody |
1 |
96-39411 3 months ago |
995-75571 995 days ago |
35-63136 35 days |
| 34092 |
staroperator author:staroperator |
feat(SetTheory/ZFC): properties of `ZFSet.omega` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory
awaiting-author
|
77/10 |
Mathlib/SetTheory/ZFC/Basic.lean,Mathlib/SetTheory/ZFC/Ordinal.lean,Mathlib/SetTheory/ZFC/PSet.lean |
3 |
31 |
['Komyyy', 'YaelDillies', 'github-actions', 'mathlib4-merge-conflict-bot', 'staroperator', 'vihdzp'] |
YaelDillies assignee:YaelDillies |
1 |
86-23292 2 months ago |
86-23292 86 days ago |
99-7345 99 days |
| 36740 |
euprunin author:euprunin |
chore: golf using `grind` |
The goal of this PR is to decrease the number of times lemmas are called explicitly. Any decrease in compilation time is a welcome side effect, although it is not a primary objective.
Trace profiling results (differences <30 ms considered measurement noise):
* `AlgebraicGeometry.Scheme.isBasis_affineOpens`: unchanged 🎉
* `SimpleGraph.Walk.takeUntil_eq_take`: 263 ms before, 180 ms after 🎉
* `SimpleGraph.Walk.dropUntil_eq_drop`: 382 ms before, 261 ms after 🎉
* `Int.image_Ico_emod`: unchanged 🎉
* `Equiv.Perm.ofSubtype_swap_eq`: unchanged 🎉
Profiled using `set_option trace.profiler true in`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
7/33 |
Mathlib/AlgebraicGeometry/AffineScheme.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean,Mathlib/Data/Int/Interval.lean,Mathlib/GroupTheory/Perm/Support.lean |
4 |
8 |
['artie2000', 'chenson2018', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
1 |
83-61352 2 months ago |
83-61353 83 days ago |
43-5868 43 days |
| 32880 |
0xTerencePrime author:0xTerencePrime |
feat(Analysis/Asymptotics): define subpolynomial growth |
## Main definitions
* `Asymptotics.IsSubpolynomial l f g`: A function `f` has subpolynomial growth with respect to `g` along filter `l` if `f = O(1 + ‖g‖^k)` for some natural `k`.
## Main results
* `IsSubpolynomial.const`: Constant functions have subpolynomial growth
* `IsSubpolynomial.id`: Identity has subpolynomial growth
* `IsSubpolynomial.add`: Closure under addition
* `IsSubpolynomial.neg`: Closure under negation
* `IsSubpolynomial.sub`: Closure under subtraction
* `IsSubpolynomial.mul`: Closure under multiplication
* `IsSubpolynomial.pow`: Closure under powers
* `isSubpolynomial_iff_one_add`: Equivalence with `(1 + ‖g‖)^k` formulation
* `IsSubpolynomial.uniform`: Uniform bounds for finite families
## Implementation notes
The definition uses `1 + ‖g‖^k` rather than `(1 + ‖g‖)^k` as the primary form, with the equivalence established in `isSubpolynomial_iff_one_add`. Four private auxiliary lemmas handle the key inequalities needed for closure proofs.
Closes #32658
|
awaiting-author
t-analysis
new-contributor
|
184/0 |
Mathlib.lean,Mathlib/Analysis/Asymptotics/Subpolynomial.lean |
2 |
29 |
['0xTerencePrime', 'ADedecker', 'github-actions', 'j-loreaux'] |
ADedecker assignee:ADedecker |
1 |
80-18985 2 months ago |
190-70956 190 days ago |
22-22665 22 days |
| 38170 |
maddycrim author:maddycrim |
feat(Algebra/Module/FinitePresentation): Finitely Presented Module Lemma |
From FLT Project
Main Definitions:
`Module.FinitePresentation.exists_fin_exact` : A finitely presented module M admits an exact sequence F' -> F -> M -> 0 where F' and F are finite free modules.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
awaiting-author
label:t-algebra$ |
9/0 |
Mathlib/Algebra/Module/FinitePresentation.lean |
1 |
17 |
['chrisflav', 'github-actions', 'maddycrim', 'themathqueen', 'vlad902'] |
nobody |
1 |
78-23758 2 months ago |
78-23758 78 days ago |
17-43852 17 days |
| 36832 |
KryptosAI author:KryptosAI |
chore(Data/Finset/Card): rename `pred_card_le_card_erase` to `sub_one_card_le_card_erase` |
## Summary
The name `pred_card_le_card_erase` suggests `Nat.pred` but the statement uses `- 1` (i.e., `Nat.sub 1`). Rename to `sub_one_card_le_card_erase` to match the actual statement.
A deprecated alias is added for backwards compatibility.
### Files changed
- `Mathlib/Data/Finset/Card.lean` — definition renamed + deprecated alias
- `Mathlib/Data/Finset/Powerset.lean` — reference updated
- `Mathlib/Combinatorics/Additive/SubsetSum.lean` — reference updated
- `Mathlib/Algebra/Polynomial/EraseLead.lean` — reference updated
Addresses the `Finset.pred_card_le_card_erase` item in #21584.
## AI disclosure
I used Claude Code to explore the codebase (finding all references to rename) and to draft the PR description. I reviewed and understand all changes — these are straightforward renames with a deprecated alias. |
new-contributor
awaiting-author
|
22/15 |
Mathlib/Algebra/Polynomial/EraseLead.lean,Mathlib/Combinatorics/Additive/SubsetSum.lean,Mathlib/Combinatorics/SetFamily/AhlswedeZhang.lean,Mathlib/Combinatorics/SetFamily/Shadow.lean,Mathlib/Data/Finset/Card.lean,Mathlib/Data/Finset/Powerset.lean,Mathlib/Data/Set/Card.lean,Mathlib/GroupTheory/Perm/Support.lean,Mathlib/RingTheory/Ideal/Operations.lean |
9 |
8 |
['KryptosAI', 'Multramate', 'dagurtomas', 'github-actions', 'mattrobball', 'ooovi'] |
nobody |
1 |
65-8128 2 months ago |
65-8128 65 days ago |
59-48094 59 days |
| 33928 |
jsm28 author:jsm28 |
feat(Combinatorics/Tiling/TileSet): indexed families of tiles |
Define the type `TileSet` for indexed families of tiles (in a discrete context), and some associated definitions (including `symmetryGroup`) and API lemmas.
`TileSet` can be used for tilings of the whole space; for tilings of part of the space; for patches of tiles (extracted from a tiling by considering tiles meeting some set of points, or considered on their own without extracting from a tiling); for multiple tilings (covering the space more than once). In particular, the fact that people study multiple tilings provides a clear justification for using indexed families rather than sets of tiles, and basic definitions and API lemmas generally work for all these different uses of `TileSet` (sometimes with weak constraints such as tiles being finite, nonempty and only having finitely many tiles meeting any point of the space).
Definitions for saying e.g. "this `TileSet` is a tiling of the whole space" are to be included in subsequent files in subsequent PRs.
From AperiodicMonotilesLean.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
460/0 |
Mathlib.lean,Mathlib/Combinatorics/Tiling/TileSet.lean |
2 |
23 |
['Parcly-Taxel', 'b-mehta', 'eric-wieser', 'github-actions', 'jsm28', 'vihdzp'] |
nobody |
1 |
64-49711 2 months ago |
189-66819 189 days ago |
189-66283 189 days |
| 36774 |
euprunin author:euprunin |
chore: replace long terminal `rw […]`:s (≥4 lemmas) with bare `simp`:s |
The goal of this PR is to decrease the number of times lemmas are called explicitly. Any decrease in compilation time is a welcome side effect, although it is not a primary objective.
Trace profiling results (differences <30 ms considered measurement noise):
* `Finset.lcm_union`: unchanged 🎉
* `Finset.gcd_union`: unchanged 🎉
* `Polynomial.derivative_eval₂_C`: unchanged 🎉
* `Polynomial.expand_pow`: unchanged 🎉
* `Cardinal.mk_real`: unchanged 🎉
* `Real.log_zpow`: unchanged 🎉
* `Matroid.eRank_le_encard_add_eRk_compl`: unchanged 🎉
* `DFinsupp.single_tsub`: unchanged 🎉
* `EReal.inv_neg`: unchanged 🎉
* `Finsupp.toMultiset_map`: unchanged 🎉
* `Finsupp.single_tsub`: unchanged 🎉
* `Multiset.countP_map`: unchanged 🎉
* `Nat.ascFactorial_eq_factorial_mul_choose'`: unchanged 🎉
* `Real.sign_intCast`: unchanged 🎉
* `Real.volume_eball`: unchanged 🎉
* `Real.volume_closedEBall`: unchanged 🎉
* `LFunction_ne_zero_of_not_quadratic_or_ne_one`: 295 ms before, 152 ms after 🎉
* `hasSum_one_div_nat_pow_mul_cos`: unchanged 🎉
* `inv_eq_of_aeval_divX_ne_zero`: unchanged 🎉
* `AlgebraicIndependent.aeval_comp_mvPolynomialOptionEquivPolynomialAdjoin`: unchanged 🎉
* `Ordinal.deriv_mul_eq_opow_omega0_mul`: unchanged 🎉
Profiled using `set_option trace.profiler true in`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
22/24 |
Mathlib/Algebra/GCDMonoid/Finset.lean,Mathlib/Algebra/Polynomial/Derivative.lean,Mathlib/Algebra/Polynomial/Expand.lean,Mathlib/Analysis/Real/Cardinality.lean,Mathlib/Analysis/SpecialFunctions/Log/Basic.lean,Mathlib/Combinatorics/Matroid/Rank/ENat.lean,Mathlib/Data/DFinsupp/Order.lean,Mathlib/Data/EReal/Inv.lean,Mathlib/Data/Finsupp/Multiset.lean,Mathlib/Data/Finsupp/Order.lean,Mathlib/Data/Multiset/Filter.lean,Mathlib/Data/Nat/Choose/Basic.lean,Mathlib/Data/Real/Sign.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/NumberTheory/LSeries/Nonvanishing.lean,Mathlib/NumberTheory/ZetaValues.lean,Mathlib/RingTheory/Algebraic/Basic.lean,Mathlib/RingTheory/AlgebraicIndependent/Basic.lean,Mathlib/SetTheory/Ordinal/FixedPoint.lean |
19 |
3 |
['artie2000', 'euprunin', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
1 |
59-77559 1 month ago |
59-77560 59 days ago |
67-395 67 days |
| 26975 |
Whysoserioushah author:Whysoserioushah |
feat: a norm_num extension for complex numbers |
co-authored-by : @thefundamentaltheor3m, @hrmacbeth
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
* depends on: #39628
* depends on: #39620
[](https://gitpod.io/from-referrer/)
|
t-meta |
444/14 |
Mathlib.lean,Mathlib/Analysis/RCLike/Basic.lean,Mathlib/Data/Complex/Basic.lean,Mathlib/Tactic.lean,Mathlib/Tactic/NormNum/Core.lean,Mathlib/Tactic/NormNum/Eq.lean,Mathlib/Tactic/NormNum/NormNumI.lean,Mathlib/Tactic/NormNum/OfScientific.lean,Mathlib/Tactic/NormNum/Result.lean,MathlibTest/norm_numI.lean |
10 |
76 |
['JovanGerb', 'Vierkantor', 'Whysoserioushah', 'dupuisf', 'eric-wieser', 'github-actions', 'grunweg', 'hrmacbeth', 'mathlib4-merge-conflict-bot'] |
eric-wieser assignee:eric-wieser |
1 |
57-48542 1 month ago |
62-70416 62 days ago |
112-30556 112 days |
| 39907 |
Hagb author:Hagb |
feat(Order/InititalSeg): `PrincipalSeg` is trichotomous for well orders |
For any two well orders, one is a principal segment of the other, or they are isomorphic.
Suggested by @vihdzp in the review of #39545
https://github.com/leanprover-community/mathlib4/pull/39545#discussion_r3262466782. It may slightly simplify the proof of `infinite_iff_nonempty_relEmbedding_of_isWellOrder`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
7/0 |
Mathlib/Order/InitialSeg.lean |
1 |
1 |
['github-actions', 'vihdzp'] |
nobody |
1 |
55-80764 1 month ago |
56-36674 56 days ago |
56-36138 56 days |
| 34875 |
banrovegrie author:banrovegrie |
feat(LinearAlgebra/Matrix): add Sherman-Morrison formula |
Mathlib has the matrix determinant lemma (`det_add_replicateCol_mul_replicateRow` in SchurComplement.lean) but lacked the corresponding inverse formula. This PR fills that gap.
- Add `Matrix.inv_add_vecMulVec`: Sherman-Morrison formula for `(A + uv^T)^{-1}`
- Add `Matrix.inv_sub_vecMulVec`: subtraction variant
- Add `Matrix.isUnit_det_add_vecMulVec`: invertibility under the formula's hypotheses
## Test plan
- [x] `lake build` passes
- [x] Lines within 100 char limit
- [x] All declarations have docstrings
**Any specific AI usage?**: Used Copilot for review purposes. |
t-algebra
new-contributor
awaiting-author
label:t-algebra$ |
135/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Matrix/ShermanMorrison.lean |
2 |
15 |
['Xxxjdjdid', 'banrovegrie', 'chrisflav', 'copilot-pull-request-reviewer', 'eric-wieser', 'github-actions', 'wwylele'] |
chrisflav assignee:chrisflav |
1 |
51-76606 1 month ago |
97-77683 97 days ago |
69-6728 69 days |
| 32989 |
kim-em author:kim-em |
fix(Tactic/Simps): skip @[defeq] inference for non-exposed definitions |
This PR makes `@[simps]` check whether the source definition's body is exposed before calling `inferDefEqAttr`. When the body is not exposed, we skip the `@[defeq]` inference to avoid validation errors.
Without this fix, using `@[simps]` on a definition that is not `@[expose]`d produces an error like:
```
Theorem Foo_bar has a `rfl`-proof and was thus inferred to be `@[defeq]`, but validating that attribute failed:
Not a definitional equality: the left-hand side ... is not definitionally equal to the right-hand side ...
Note: This theorem is exported from the current module. This requires that all definitions that need to be unfolded to prove this theorem must be exposed.
```
The fix checks `(← getEnv).setExporting true |>.find? cfg.srcDeclName |>.any (·.hasValue)` to determine if the definition body is visible in the public scope, and only calls `inferDefEqAttr` if it is.
🤖 Prepared with Claude Code |
t-meta
LLM-generated
|
68/16 |
Mathlib/CategoryTheory/Triangulated/TStructure/TruncLTGE.lean,Mathlib/Tactic/Simps/Basic.lean,Mathlib/Tactic/Translate/Core.lean,MathlibTest/SimpsModule.lean |
4 |
22 |
['JovanGerb', 'Vierkantor', 'github-actions', 'joneugster', 'kim-em', 'mathlib-merge-conflicts'] |
nobody |
1 |
48-39707 1 month ago |
48-36951 48 days ago |
37-21977 37 days |
| 33355 |
0xTerencePrime author:0xTerencePrime |
feat(Combinatorics/SimpleGraph/Connectivity): define vertex connectivity |
**AI Disclosure**: Developed with LLM assistance (Claude). All mathematical design decisions were made by the author.
---
This PR introduces the foundations of vertex connectivity for simple graphs, providing a counterpart to the edge connectivity theory in #32870.
### Main definitions
- `SimpleGraph.IsVertexReachable`: two vertices are `k`-vertex-reachable if they remain reachable after removing any set of strictly fewer than `k` vertices, using `G.induce sᶜ`.
- `SimpleGraph.IsVertexPreconnected`: a graph is `k`-vertex-preconnected if any two vertices are `k`-vertex-reachable.
- `SimpleGraph.IsVertexConnected`: a graph is `k`-vertex-connected if it is `k`-vertex-preconnected and has more than `k` vertices (`k + 1 ≤ ENat.card V`).
### Key lemmas
- `k = 0`: 0-connected ↔ nonempty; 0-preconnected always holds
- `k = 1`: 1-connected ↔ `Nontrivial V ∧ G.Preconnected`
- `anti` / `mono`: antitonic in `k`, monotonic in the graph |
new-contributor
t-combinatorics
LLM-generated
awaiting-author
merge-conflict
|
169/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/VertexConnectivity.lean |
2 |
166 |
['0xTerencePrime', 'SnirBroshi', 'SproutSeeds', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
b-mehta assignee:b-mehta |
1 |
44-62853 1 month ago |
50-59317 50 days ago |
65-5110 65 days |
| 40502 |
metakunt author:metakunt |
feat(RingTheory/RootsOfUnits/PrimitiveRoots): pow_div_gcd |
From #39404 |
t-ring-theory |
13/11 |
Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean |
1 |
2 |
['github-actions', 'tb65536'] |
nobody |
1 |
40-82730 1 month ago |
40-83612 40 days ago |
40-83649 40 days |
| 39579 |
hawkrobe author:hawkrobe |
feat(RingTheory): Bialgebra / Hopf algebra structure on SymmetricAlgebra |
Adds Hopf algebra structure on SymmetricAlgebra.
---
- [x] depends on: #39483
- [x] depends on: #39785
- [ ] depends on: #39841
- [ ] depends on: #31898
- [ ] depends on: #39790 |
t-ring-theory
new-contributor
blocked-by-other-PR
merge-conflict
|
691/22 |
Mathlib.lean,Mathlib/LinearAlgebra/TensorAlgebra/Basic.lean,Mathlib/RingTheory/Bialgebra/Primitive.lean,Mathlib/RingTheory/Bialgebra/Quotient.lean,Mathlib/RingTheory/Bialgebra/SymmetricAlgebra.lean,Mathlib/RingTheory/Bialgebra/TensorAlgebra.lean,Mathlib/RingTheory/Coalgebra/Quotient.lean,Mathlib/RingTheory/HopfAlgebra/Generators.lean,Mathlib/RingTheory/HopfAlgebra/Primitive.lean,Mathlib/RingTheory/HopfAlgebra/Quotient.lean,Mathlib/RingTheory/HopfAlgebra/SymmetricAlgebra.lean,Mathlib/RingTheory/HopfAlgebra/TensorAlgebra.lean |
12 |
14 |
['YaelDillies', 'github-actions', 'hawkrobe', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
YaelDillies assignee:YaelDillies |
1 |
36-69280 1 month ago |
58-68712 58 days ago |
1-18386 1 day |
| 38702 |
jcommelin author:jcommelin |
chore(Data/Real): encapsulate real numbers |
This PR:
* hides the definition of the real numbers
* preserves defeqs when casting `Nat`, `Int`, `Rat`, into the reals
* preserves the defeq `x - y = x + (-y)` for `x y : Real`
* removes a bunch of technical debt
* adjusts imports in the library, where files relied on getting access to Cauchy sequences transitively via importing the reals.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
|
235/256 |
Archive/Imo/Imo2013Q5.lean,Counterexamples/SeminormLatticeNotDistrib.lean,Mathlib.lean,Mathlib/Analysis/Complex/Norm.lean,Mathlib/Analysis/RCLike/Basic.lean,Mathlib/Analysis/Real/Cardinality.lean,Mathlib/Combinatorics/SimpleGraph/Triangle/Counting.lean,Mathlib/Data/Complex/Basic.lean,Mathlib/Data/ENNReal/Basic.lean,Mathlib/Data/NNReal/Defs.lean,Mathlib/Data/Real/Archimedean.lean,Mathlib/Data/Real/Basic.lean,Mathlib/Data/Real/Cauchy.lean,Mathlib/Data/Real/Sign.lean,Mathlib/NumberTheory/Padics/PadicIntegers.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/NumberTheory/SelbergSieve.lean,Mathlib/Topology/Algebra/Ring/Real.lean,Mathlib/Topology/Instances/Real/Lemmas.lean,Mathlib/Topology/MetricSpace/CauSeqFilter.lean,Mathlib/Topology/UniformSpace/CompareReals.lean,Mathlib/Topology/UniformSpace/Real.lean,MathlibTest/Complex.lean,MathlibTest/Quaternion.lean,MathlibTest/Real.lean,MathlibTest/peel.lean |
26 |
37 |
['JovanGerb', 'Kha', 'YaelDillies', 'eric-wieser', 'fpvandoorn', 'github-actions', 'jcommelin', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts', 'riccardobrasca', 'sgouezel', 'wkrozowski'] |
nobody |
1 |
34-77290 1 month ago |
84-9547 84 days ago |
0-2637 43 minutes |
| 36686 |
euprunin author:euprunin |
chore: golf using `grind` |
The goal of this PR is to decrease the number of times lemmas are called explicitly. Any decrease in compilation time is a welcome side effect, although it is not a primary objective.
Trace profiling results (differences <30 ms considered measurement noise):
* `List.prod_map_ite`: unchanged 🎉
* `Path.Homotopy.trans_assoc_reparam`: 2938 ms before, 717 ms after 🎉
* `SimplexCategory.δ_comp_δ`: 522 ms before, 316 ms after 🎉
* `Finsupp.ext_iff'`: unchanged 🎉
* `Computation.bind_assoc`: unchanged 🎉
* `Set.piecewise_insert`: unchanged 🎉
* `ZMod.valMinAbs_mem_Ioc`: unchanged 🎉
* `Matrix.det_eq_of_forall_row_eq_smul_add_pred_aux`: 2141 ms before, 2004 ms after 🎉
Profiled using `set_option trace.profiler true in`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author |
11/50 |
Mathlib/Algebra/BigOperators/Group/List/Basic.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/Basic.lean,Mathlib/AlgebraicTopology/SimplexCategory/Basic.lean,Mathlib/Data/Finsupp/Defs.lean,Mathlib/Data/Seq/Computation.lean,Mathlib/Data/Set/Piecewise.lean,Mathlib/Data/ZMod/ValMinAbs.lean,Mathlib/LinearAlgebra/Matrix/Determinant/Basic.lean |
8 |
14 |
['artie2000', 'chenson2018', 'dagurtomas', 'euprunin', 'github-actions', 'mathlib-merge-conflicts', 'ooovi'] |
nobody |
2 |
34-54442 1 month ago |
77-67415 77 days ago |
49-23305 49 days |
| 40579 |
jcreinhold author:jcreinhold |
feat(Algebra/Category/Ring): preserve limits to CommMonCat |
Adds the missing instance saying that forgetting a commutative ring to its multiplicative commutative monoid preserves limits. |
t-algebra
new-contributor
label:t-algebra$ |
7/0 |
Mathlib/Algebra/Category/Ring/Limits.lean |
1 |
7 |
['felixpernegger', 'github-actions', 'jcreinhold'] |
nobody |
1 |
33-32452 1 month ago |
38-17524 38 days ago |
38-25462 38 days |
| 38968 |
eric-wieser author:eric-wieser |
fix: improve defeqs of comp actions |
The (deliberately) non-reducible `SMul.comp.smul` definition caused us to end with these failing unification examples at instance reducibility:
```lean
example : (Module.compHom ℕ (RingHom.id ℕ)).toSMul = SMul.comp ℕ (RingHom.id ℕ) := by
with_reducible_and_instances rfl
example : (Module.compHom ℕ (RingHom.id ℕ)).toMulAction = MulAction.compHom ℕ (MonoidHom.id ℕ) := by
with_reducible_and_instances rfl
```
There are two issues this fixes:
* the `compHom` constructors are inconsistent on whether they use `SMul.comp.smul` or reimplement its contents
* we need `SMul.comp.smul` to be instance-reducible, so that when invoked with the identity function it is instance-defeq to the original action.
As a bonus, allowing these to unify means we can have a single `SMul.comp_smul_def` lemma that works for all of the `compHom` definitions.
We could also consider changing `compHom` to take a `HomClass` in order to remove the casts entirely, which would remove the need to add these `SMul.comp` terms. This PR leaves that for possible future work, noting that in the past we have moved away from writing `def`s taking `HomClass`es.
Co-authored-by: Junye Ji <jijunye1@outlook.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
Refined from #38777 |
t-algebra
merge-conflict
label:t-algebra$ |
46/26 |
Mathlib/Algebra/Algebra/Defs.lean,Mathlib/Algebra/Group/Action/Defs.lean,Mathlib/Algebra/Group/Action/Hom.lean,Mathlib/Algebra/GroupWithZero/Action/Defs.lean,Mathlib/Algebra/GroupWithZero/Action/End.lean,Mathlib/Algebra/Module/RingHom.lean,Mathlib/Analysis/Complex/UpperHalfPlane/MoebiusAction.lean,Mathlib/Analysis/Complex/UpperHalfPlane/ProperAction.lean,Mathlib/Topology/Algebra/Group/OpenMapping.lean |
9 |
13 |
['JJYYY-JJY', 'Vierkantor', 'eric-wieser', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
1 |
29-52698 29 days ago |
29-52699 29 days ago |
13-10860 13 days |
| 36743 |
Jun2M author:Jun2M |
feat(Combinatorics/GraphLike): introduce `GraphLike` typeclass |
Edit: There is #40204: alternative PR that uses incidence to define hypergraph.
Per discussion at ([#graph theory > HasAdj](https://leanprover.zulipchat.com/#narrow/channel/252551-graph-theory/topic/HasAdj/with/575843445)), This PR introduces the `GraphLike` typeclass to capture the notions like `dart` and `walk` across various graph objects, such as `SimpleGraph`, `Graph`, and `Digraph`.
The goal is that by abstracting these core components into a typeclass, we can prove these results once for all graph-like structures rather than duplicating them across different graph types.
### Main definitions
* `GraphLike V D E Gr`: A typeclass parameterized by a vertex type `V`, dart type `D` and a graph type `Gr` (with `V`, `D` & `E` as an `outParam`).
* `GraphLike.verts : Set V`: The set of vertices of the graph.
* `GraphLike.darts : Set D`: The set of darts of the graph.
* `GraphLike.edges : Set E`: The set of edges of the graph.
* `GraphLike.Adj : V → V → Prop`: The adjacency relation, defined by default as `∃ d ∈ darts, fst d = u ∧ snd d = v`.
---
This PR generalises #35776 to also unify `Graph`.
PRs depending on this PR are
#39047 (graphLike with no multi edges) => #39050 (Digraph is graphLike)
||
V
#36829 (undirected graphLike) => #39053 (Graph is graphLike) & #39054 (Simplegraph is graphLike)
||
V
#36756 (def of walk on GraphLike) => #36971 (change Simplegraph to use GraphLike walk)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
104/0 |
Mathlib.lean,Mathlib/Combinatorics/GraphLike/Basic.lean |
2 |
78 |
['IvanRenison', 'Jun2M', 'SnirBroshi', 'YaelDillies', 'github-actions', 'lauramonk', 'mathlib-merge-conflicts'] |
nobody |
1 |
29-49712 29 days ago |
74-80515 74 days ago |
125-78395 125 days |
| 40387 |
tb65536 author:tb65536 |
feat(RingTheory/Invariant/Basic): inertia subgroup of a quotient group |
This PR proves that the inertia subgroup of a quotient group is the image of the inertia subgroup.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #40383
- [x] depends on: #40385
- [x] depends on: #40386
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
68/0 |
Mathlib/RingTheory/Invariant/Basic.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues', 'xroblot'] |
nobody |
1 |
28-81330 28 days ago |
28-86031 28 days ago |
29-3448 29 days |
| 34932 |
erdOne author:erdOne |
feat(AlgebraicGeometry): formally etale morphisms |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
merge-conflict
|
163/12 |
Mathlib.lean,Mathlib/AlgebraicGeometry/Morphisms/Etale.lean,Mathlib/AlgebraicGeometry/Morphisms/FormallyEtale.lean,Mathlib/AlgebraicGeometry/Morphisms/RingHomProperties.lean,Mathlib/RingTheory/RingHom/Etale.lean |
5 |
21 |
['chrisflav', 'erdOne', 'github-actions', 'joneugster', 'mathlib-bors', 'mathlib-merge-conflicts', 'ocfnash'] |
nobody |
1 |
28-35191 28 days ago |
147-56678 147 days ago |
11-35673 11 days |
| 24965 |
erdOne author:erdOne |
refactor: Make `IsLocalHom` take unbundled map |
Under the current definition, `IsLocalHom f` and `IsLocalHom f.toMonoidHom` are not defeq, which causes quite some annoyances. We also have a consensus to not use `*HomClass` in definitions. As a result, we change `IsLocalHom` to take an unbundled function instead of a funlike.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
merge-conflict
label:t-algebra$ |
18/9 |
Mathlib/Algebra/Group/Units/Hom.lean,Mathlib/AlgebraicGeometry/Scheme.lean,Mathlib/Geometry/RingedSpace/LocallyRingedSpace.lean,Mathlib/Geometry/RingedSpace/OpenImmersion.lean,Mathlib/RingTheory/LocalRing/ResidueField/Basic.lean |
5 |
19 |
['adomani', 'alreadydone', 'erdOne', 'eric-wieser', 'github-actions', 'jcommelin', 'leanprover-community-bot-assistant', 'mathlib-bors', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'vihdzp'] |
mattrobball assignee:mattrobball |
1 |
28-35189 28 days ago |
246-20522 246 days ago |
24-84527 24 days |
| 27180 |
ADedecker author:ADedecker |
feat: quotient of a monoid with zero by a multiplicative congruence |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
My motivation is getting a more conceptual construction of [ValuativeRel.ValueGroupWithZero](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/Valuation/ValuativeRel.html#ValuativeRel.ValueGroupWithZero), but I think this is of independent interest.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
141/26 |
Mathlib.lean,Mathlib/Data/Quot.lean,Mathlib/Data/Setoid/Basic.lean,Mathlib/GroupTheory/Congruence/Defs.lean,Mathlib/GroupTheory/Congruence/GroupWithZero.lean |
5 |
38 |
['ADedecker', 'eric-wieser', 'github-actions', 'mathlib-bors', 'mathlib4-merge-conflict-bot', 'ocfnash'] |
ocfnash assignee:ocfnash |
1 |
28-35188 28 days ago |
343-20088 343 days ago |
28-12053 28 days |
| 34015 |
erdOne author:erdOne |
feat(AlgebraicGeometry): category of schemes affine over a base |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
merge-conflict
|
522/11 |
Mathlib.lean,Mathlib/AlgebraicGeometry/AffineOver.lean,Mathlib/AlgebraicGeometry/Limits.lean,Mathlib/AlgebraicGeometry/Morphisms/Affine.lean,Mathlib/AlgebraicGeometry/OpenImmersion.lean,Mathlib/AlgebraicGeometry/RelativeGluing.lean,Mathlib/AlgebraicGeometry/Sites/SmallAffineZariski.lean,Mathlib/CategoryTheory/Sites/Hypercover/Subcanonical.lean |
8 |
57 |
['chrisflav', 'dagurtomas', 'erdOne', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'riccardobrasca'] |
chrisflav assignee:chrisflav |
1 |
28-35185 28 days ago |
73-21806 73 days ago |
40-35668 40 days |
| 38223 |
Deicyde author:Deicyde |
feat(Geometry/Manifold): add `MfldCat`, the category of `C^n` manifolds |
We define `MfldCat 𝕜 n`: the category of `C^n` manifolds over a field `𝕜`, following the pattern of `TopCat` in
`Mathlib.Topology.Category.TopCat.Basic`. We also implement `HasForget₂ (MfldCat 𝕜 n) TopCat`—the forgetful functor into the category of topological spaces. For more discussion see the Zulip thread: [#PR reviews > #38223 The Category of C^n Manifolds](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/.2338223.20The.20Category.20of.20C.5En.20Manifolds/with/587038032)
Also added: `ContMDiffMap.id_apply`, `.coe_id` and `.coe_comp` which are comparable to `ContinuousMap` API.
### Future work
- ✅ Define a Monoidal structure via product manifolds, analogous to `Manifold.Topology.Category.TopCat.Monoidal` #38560
- ✅ Define the tangent functor: `M ↦ TM`, `F ↦ F.tangentMap` from `MfldCat (n+1) 𝕜` to `MfldCat n 𝕜` #38270
- Functor `FGModuleCat 𝕜 ⥤ MfldCat 𝕜 n` sending a finite-dimensional `𝕜`-vector space to the manifold modeled on itself. Left as `TODO`.
- Define `FGModuleCat 𝕜` as an enriched category over `MfldCat n 𝕜`. Then _smooth functors_ can be realized as endofunctors on the enriched category. This is the main motivation for this construction.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #41109 [The category of `C^n` manifolds on a fixed model]
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
new-contributor
t-category-theory
awaiting-author
blocked-by-other-PR
|
224/0 |
Mathlib.lean,Mathlib/Geometry/Manifold/Category/MfldCat/Basic.lean,Mathlib/Geometry/Manifold/ContMDiffMap.lean |
3 |
60 |
['Deicyde', 'chrisflav', 'dagurtomas', 'github-actions', 'idontgetoutmuch', 'mathlib-dependent-issues', 'peabrainiac'] |
joelriou assignee:joelriou |
1 |
24-68374 24 days ago |
28-77766 28 days ago |
59-40239 59 days |
| 40915 |
felixpernegger author:felixpernegger |
chore: remove (all) instances of `simp; infer_instance` |
Removes some exceptions for `linter.flexible`; these are all occurences of this pattern (including multi-line).
See also the reviews at #40883
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
tech debt
|
9/11 |
Mathlib/Analysis/Calculus/ContDiff/FaaDiBruno.lean,Mathlib/CategoryTheory/Comma/Over/Pullback.lean |
2 |
4 |
['eric-wieser', 'github-actions', 'themathqueen'] |
nobody |
1 |
23-75724 23 days ago |
26-80057 26 days ago |
2-59119 2 days |
| 41086 |
erdOne author:erdOne |
feat(RingTheory): etale lifting property of henselian local rings |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
large-import
awaiting-author
|
476/19 |
Mathlib.lean,Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/LinearAlgebra/Dimension/Free.lean,Mathlib/RingTheory/Henselian.lean,Mathlib/RingTheory/IdempotentInstances.lean,Mathlib/RingTheory/Idempotents.lean,Mathlib/RingTheory/LocalRing/RingHom/IsIntegral.lean |
7 |
36 |
['chrisflav', 'faenuccio', 'github-actions'] |
faenuccio assignee:faenuccio |
1 |
21-78582 21 days ago |
21-78647 21 days ago |
3-46413 3 days |
| 37346 |
euprunin author:euprunin |
chore: golf using `grind` |
The goal of this PR is to decrease the number of times lemmas are called explicitly. Any decrease in compilation time is a welcome side effect, although it is not a primary objective.
Trace profiling results (differences <30 ms considered measurement noise):
* `✅️ SimpleGraph.Walk.IsPath.getVert_injOn`: unchanged 🎉
* `✅️ SimpleGraph.Walk.length_bypass_le`: unchanged 🎉
* `✅️ Rat.floor_intCast_div_natCast`: unchanged 🎉
* `✅️ InnerProductGeometry.norm_eq_of_angle_sub_eq_angle_sub_rev_of_angle_ne_pi`: unchanged 🎉
* `✅️ padicNorm.zero_of_padicNorm_eq_zero`: unchanged 🎉
Profiled using `set_option trace.profiler true in`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-zulip
merge-conflict
|
7/45 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Data/Rat/Floor.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/NumberTheory/Padics/PadicNorm.lean |
4 |
23 |
['FernandoChu', 'bryangingechen', 'chenson2018', 'euprunin', 'faenuccio', 'github-actions', 'grunweg', 'mathlib-merge-conflicts'] |
nobody |
1 |
20-81989 20 days ago |
84-10037 84 days ago |
30-49603 30 days |
| 39720 |
vihdzp author:vihdzp |
feat: cofinality within order |
We introduce `Order.cofWithin x = Order.cof (Iio x)` for the cofinality of an element within a preorder. This generalizes `Ordinal.cof`, with the caveat that `cof o : Cardinal.{u}` for `o : Ordinal.{u}`, whereas `cofWithin o : Cardinal.{u + 1}`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory
awaiting-author
|
104/14 |
Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Cardinal/Cofinality/Basic.lean,Mathlib/SetTheory/Cardinal/Cofinality/Ordinal.lean |
3 |
13 |
['SnirBroshi', 'YaelDillies', 'b-mehta', 'github-actions', 'mathlib-merge-conflicts', 'ocfnash', 'vihdzp'] |
nobody |
1 |
20-76623 20 days ago |
21-83860 21 days ago |
38-63310 38 days |
| 36376 |
jessealama author:jessealama |
feat(SimpleGraph): hamiltonian cycle from cyclic permutation |
This PR provides `IsHamiltonian.of_perm`, a bridge from `Equiv.Perm.IsCycle` to `SimpleGraph.IsHamiltonian`: if σ is a permutation that is a single cycle with full support on at least 3 elements, and each step `v → σ v` is an edge of `G`, then `G` is Hamiltonian.
### New definitions and lemmas
**`Mathlib/Data/List/Chain.lean`**:
- `IsChain.iterate`: `List.iterate f a n` is a chain under `r` whenever `r a (f a)` holds for all `a`
**`Mathlib/Data/List/Iterate.lean`**:
- `getLast_iterate`: the last element of `List.iterate f a n` is `f^[n - 1] a`
**`Mathlib/Combinatorics/SimpleGraph/Walk/Iterate.lean`** (new file):
- `Walk.iterate`: builds a walk of length `n` from `x` to `f^[n] x` for any function `f` with `G.Adj x (f x)` for all `x`, defined via `Walk.ofSupport`
- `Walk.length_iterate`, `Walk.support_iterate`, `Walk.edges_iterate`: basic API
**`Mathlib/GroupTheory/Perm/Cycle/Basic.lean`**:
- `IsCycleOn.injOn_pow_apply`: the map `n ↦ (f ^ n) a` is injective on `Finset.range #s`
**`Mathlib/GroupTheory/Perm/Cycle/Concrete.lean`**:
- `IsCycleOn.injOn_sym2_pow_apply`: the unordered-pair edge map `k ↦ s((f ^ k) a, (f ^ (k + 1)) a)` is injective on `[0, #s)` when `#s ≠ 2`
- `IsCycleOn.sym2_pow_apply_ne`: edge distinctness for cycle-on permutations — `s((f ^ k) a, (f ^ (k + 1)) a) ≠ s(a, f a)` when `k ≠ 0`, `k < #s`, and `#s ≠ 2`
- `Perm.toList_eq_range_map_pow`: expresses `toList` as a range map over powers
**`Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean`**:
- `cons_isHamiltonianCycle_iff`: a Hamiltonian path closed by an edge outside its support is a Hamiltonian cycle, and conversely
- `IsHamiltonian.of_perm`: the main theorem
---
- [x] depends on: #36307
- [ ] depends on: #35255
- [ ] depends on: #34799
|
t-combinatorics
awaiting-author
blocked-by-other-PR
|
182/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian/Perm.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Iterate.lean,Mathlib/Data/List/Chain.lean,Mathlib/Data/List/Iterate.lean,Mathlib/GroupTheory/Perm/Cycle/Basic.lean,Mathlib/GroupTheory/Perm/Cycle/Concrete.lean |
8 |
88 |
['SnirBroshi', 'YaelDillies', 'faenuccio', 'github-actions', 'jessealama', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vlad902'] |
b-mehta assignee:b-mehta |
1 |
20-69012 20 days ago |
37-26273 37 days ago |
71-22971 71 days |
| 31892 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Sphere/PolePolar): poles and polars |
Define poles and polars for spheres in Euclidean affine spaces, and set up some basic API, including in particular La Hire's theorem (`p₁` lies on the polar of `p₂` if and only if `p₂` lies on the polar of `p₁`).
Poles and polars are actually meaningful for any quadric in a projective space over any field, but I think it's reasonable to set up this theory for spheres in the Euclidean context and potentially link it in future to more general projective geometry.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #31891
- [x] depends on: #32296
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
158/0 |
Mathlib.lean,Mathlib/Geometry/Euclidean/Sphere/PolePolar.lean |
2 |
10 |
['Parcly-Taxel', 'github-actions', 'jsm28', 'kim-em', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
2 |
20-46723 20 days ago |
20-47532 20 days ago |
116-73758 116 days |
| 40660 |
jcommelin author:jcommelin |
chore(Algebra/Module/Submodule): rename variables |
This PR renames variables in `Algebra/Module/Submodule/Map.lean`.
The entire patch is trivial modulo alpha-equivalence and to comments.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
merge-conflict
label:t-algebra$ |
143/140 |
Mathlib/Algebra/Module/Submodule/Map.lean |
1 |
11 |
['github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'riccardobrasca', 'themathqueen'] |
nobody |
1 |
20-9740 20 days ago |
34-28595 34 days ago |
0-73 1 minute |
| 32282 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Angle/Incenter): unoriented angle bisection |
Add lemmas giving unoriented angles involving the incenter and excenters of a triangle as expressions involving dividing angles of the triangle by 2, deduced from oriented bisection lemmas.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #30981
- [ ] depends on: #30982
- [ ] depends on: #31205
- [ ] depends on: #32019
- [ ] depends on: #32021
- [ ] depends on: #32259
- [ ] depends on: #32260
- [ ] depends on: #32270
- [ ] depends on: #32273
- [ ] depends on: #32278
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
92/0 |
Mathlib/Geometry/Euclidean/Angle/Incenter.lean |
1 |
19 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'wwylele'] |
nobody |
1 |
19-15408 19 days ago |
19-15700 19 days ago |
116-68740 116 days |
| 39722 |
kg583 author:kg583 |
feat(Combinatorics): link `Nat.Partition` to `YoungDiagram` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
AI disclosure: Claude was used to source some proof sketches.
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
large-import
|
111/4 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Partition/Basic.lean,Mathlib/Combinatorics/Enumerative/Partition/YoungDiagram.lean,Mathlib/Combinatorics/Young/YoungDiagram.lean |
4 |
48 |
['NoahW314', 'YaelDillies', 'github-actions', 'kg583', 'wwylele'] |
YaelDillies assignee:YaelDillies |
2 |
15-66295 15 days ago |
15-66295 15 days ago |
50-60676 50 days |
| 38483 |
jessealama author:jessealama |
feat(Algebra): finset sums of antiperiodic functions |
Two lemmas on `Finset` sums of `Function.Antiperiodic` functions, in the new file `Mathlib.Algebra.BigOperators.Periodic`: `sum_Ico_shift`, that shifting a sum over `[a, b)` by the antiperiod negates it; and `sum_Ico_mul_shift`, the analogue for a sum weighted by an antiperiodic function. Spun off from #29713 (Euler-Poincaré formula).
|
t-algebra
awaiting-author
label:t-algebra$ |
49/0 |
Mathlib.lean,Mathlib/Algebra/BigOperators/Periodic.lean |
2 |
19 |
['github-actions', 'j-loreaux', 'jessealama', 'mathlib-splicebot', 'themathqueen', 'wwylele'] |
themathqueen assignee:themathqueen |
1 |
15-16153 15 days ago |
19-77336 19 days ago |
58-22139 58 days |
| 41208 |
tb65536 author:tb65536 |
chore(FieldTheory/Galois/IsGaloisGroup): remove FaithfulSMul assumptions |
A few results in IsGaloisGroup.lean are proved by passing to fraction fields which requires assuming FaithfulSMul. This PR removes the FaithfulSMul assumption by first passing to the image subring.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
28/29 |
Mathlib/FieldTheory/Galois/IsGaloisGroup.lean,Mathlib/NumberTheory/RamificationInertia/Galois.lean,Mathlib/RingTheory/IsGaloisGroup/Basic.lean |
3 |
1 |
['Whysoserioushah', 'github-actions'] |
nobody |
1 |
15-15745 15 days ago |
21-65915 21 days ago |
21-65380 21 days |
| 40735 |
tb65536 author:tb65536 |
feat(NumberTheory/NumberField/AdeleRing): define the idele class group |
This PR defines the idele class group and the maps from the completions at finite places. This will be used to define Hecke L-Functions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
t-algebra
label:t-algebra$ |
82/5 |
Mathlib/NumberTheory/NumberField/AdeleRing.lean,Mathlib/NumberTheory/NumberField/InfiniteAdeleRing.lean,Mathlib/RingTheory/DedekindDomain/FiniteAdeleRing.lean,Mathlib/Topology/Algebra/RestrictedProduct/Basic.lean |
4 |
4 |
['github-actions', 'smmercuri'] |
riccardobrasca assignee:riccardobrasca |
1 |
14-50599 14 days ago |
34-62409 34 days ago |
34-61874 34 days |
| 31135 |
kckennylau author:kckennylau |
feat(RingTheory): is localization iff is localization on saturation |
In this PR we show that `A` is a localization of `R` on the submonoid `S` iff it is so on the saturation of `S`.
Crucially, the saturation of `S` is precisely the elements that become a unit in `A`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #31132
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
53/0 |
Mathlib.lean,Mathlib/RingTheory/Localization/Saturation.lean |
2 |
20 |
['alreadydone', 'chrisflav', 'github-actions', 'kckennylau', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'riccardobrasca'] |
chrisflav and joneugster assignee:joneugster assignee:chrisflav |
1 |
14-15335 14 days ago |
14-15888 14 days ago |
61-15498 61 days |
| 31361 |
alreadydone author:alreadydone |
feat(Algebra/Order): convex subgroups |
---
- [x] depends on: #32886
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-order
awaiting-author
label:t-algebra$ |
342/0 |
Mathlib.lean,Mathlib/Algebra/Order/Archimedean/Class.lean,Mathlib/Algebra/Order/Group/Convex.lean,Mathlib/Order/Birkhoff.lean,Mathlib/Order/Quotient.lean |
5 |
100 |
['Vierkantor', 'YaelDillies', 'alreadydone', 'b-mehta', 'faenuccio', 'github-actions', 'kckennylau', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'vihdzp', 'wwylele'] |
faenuccio assignee:faenuccio |
1 |
14-11154 14 days ago |
15-55402 15 days ago |
57-52008 57 days |
| 41306 |
vlad902 author:vlad902 |
feat(SimpleGraph): reduce CycleGraph imports |
Reduce the imports for CycleGraph.lean and re-prove and move a few lemmas around as a result.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
44/23 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/CycleGraph.lean,Mathlib/Combinatorics/SimpleGraph/Hasse.lean |
3 |
13 |
['SnirBroshi', 'github-actions', 'vlad902'] |
nobody |
1 |
14-5882 14 days ago |
19-24227 19 days ago |
19-23733 19 days |
| 40405 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Group): remove an erw |
Extracted from #40348
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
3/1 |
Mathlib/MeasureTheory/Group/GeometryOfNumbers.lean |
1 |
1 |
['Multramate', 'github-actions'] |
kex-y assignee:kex-y |
1 |
13-20411 13 days ago |
43-14032 43 days ago |
43-13496 43 days |
| 40904 |
jiangf13 author:jiangf13 |
chore(Algebra/Group/WithOne): remove stale TODO |
The TODO claimed that `WithOne.coe_mul` and `WithZero.coe_mul` have inconsistent implicit parameters. Their current signatures are both of the form `{α} [Mul α] (a b : α)`, so the TODO is stale.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
0/4 |
Mathlib/Algebra/Group/WithOne/Defs.lean |
1 |
2 |
['Multramate', 'github-actions'] |
nobody |
1 |
13-20333 13 days ago |
29-82901 29 days ago |
29-82365 29 days |
| 40952 |
tb65536 author:tb65536 |
feat(Algebra/Group/Subgroup/Basic): monotonicity of inertia subgroups |
This PR proves that inertia subgroups are monotone.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
5/1 |
Mathlib/Algebra/Group/Subgroup/Basic.lean |
1 |
1 |
['Multramate', 'github-actions'] |
nobody |
1 |
13-19898 13 days ago |
29-71 28 days ago |
28-85936 28 days |
| 40402 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Integral): remove an `erw` |
Extracted from #40348. Note we cannot just do `simp_all [...]`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
tech debt
awaiting-author
|
3/2 |
Mathlib/MeasureTheory/Integral/RieszMarkovKakutani/NNReal.lean |
1 |
5 |
['Multramate', 'felixpernegger', 'github-actions', 'mcdoll'] |
EtienneC30 assignee:EtienneC30 |
1 |
13-4513 13 days ago |
13-8106 13 days ago |
30-7330 30 days |
| 41537 |
Mathias-Stout author:Mathias-Stout |
feat(RingTheory/TwoSidedIdeal/Lattice): add lemmas on two-sided ideals |
We add three lemmas on two-sided ideals.
These are analogues of existing lemmas of `Submodule` with the same names.
This prepares a follow-up PR proving that quaternions are central simple.
Co-authored-by: Justus Springer [justusspringer@gmx.de](mailto:justusspringer@gmx.de)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
|
13/0 |
Mathlib/RingTheory/TwoSidedIdeal/Lattice.lean |
1 |
5 |
['Whysoserioushah', 'github-actions', 'kbuzzard'] |
nobody |
1 |
12-76865 12 days ago |
12-79308 12 days ago |
13-149 13 days |
| 36202 |
vihdzp author:vihdzp |
feat: more theorems on the Cantor normal form |
We also remove some redundant assumptions.
Used in the CGT repo.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory |
68/17 |
Mathlib/SetTheory/Ordinal/CantorNormalForm.lean |
1 |
21 |
['SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
1 |
12-49709 12 days ago |
119-19481 119 days ago |
138-10906 138 days |
| 40981 |
LLaurance author:LLaurance |
chore(Algebra/Ring/BooleanRing): resolve TODO on non-terminal simp |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
1/3 |
Mathlib/Algebra/Ring/BooleanRing.lean |
1 |
2 |
['Multramate', 'github-actions'] |
nobody |
1 |
12-10747 12 days ago |
12-11295 12 days ago |
28-2495 28 days |
| 39736 |
NoahW314 author:NoahW314 |
feat(RingTheory/MvPolynomial/MonomialOrder): add `leadingTerm` lemmas |
Add lemmas for `leadingTerm` to match those for `leadingCoeff`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
87/0 |
Mathlib/RingTheory/MvPolynomial/MonomialOrder.lean |
1 |
5 |
['Hagb', 'NoahW314', 'github-actions'] |
alreadydone and joneugster assignee:alreadydone assignee:joneugster |
1 |
11-49711 11 days ago |
60-42427 60 days ago |
60-41891 60 days |
| 40841 |
TJHeeringa author:TJHeeringa |
chore(Topology/Algebra): rename .equivOfInverse to .ofContinuousLinearMap |
Renames `ContinuousLinearEquiv.equivOfInverse` and `ContinuousLinearEquiv.equivOfInverse'` to `ContinuousLinearEquiv.ofContinuousLinearMap` and `ContinuousLinearEquiv.ofContinuousLinearMap'`. It reorders the order of arguments to match that of `ofLinearMap`.
---
Prerequisite for the `TensorProduct.congrL` requested in https://github.com/leanprover-community/mathlib4/pull/40074#issuecomment-4650716234.
Addresses the ToDO `*ToDo*: Improve the naiming to make it match `LinearMap.ofLinear`.` for `ContinuousLinearEquiv.equivOfInverse`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #40865
[](https://gitpod.io/from-referrer/)
|
t-topology
blocked-by-other-PR
|
78/21 |
Mathlib/Topology/Algebra/Module/Equiv.lean |
1 |
73 |
['TJHeeringa', 'Whysoserioushah', 'b-mehta', 'github-actions', 'j-loreaux', 'mathlib-dependent-issues', 'themathqueen'] |
PatrickMassot assignee:PatrickMassot |
1 |
10-67639 10 days ago |
14-62962 14 days ago |
16-1782 16 days |
| 40865 |
TJHeeringa author:TJHeeringa |
refactor(Algebra/Module/Equiv): update name and refactor API ofLinearEquiv |
Change the name of `LinearEquiv.ofLinear` to `LinearEquiv.ofLinearMap` and change the API. This replaces `_apply` by `coe_`, introduces `_symm`, which makes `_symm_apply` and `_symm_toLinearMap` redundant, and changes `_toLinearMap` to `toLinearMap_`.
---
This PR is as discussed in https://github.com/leanprover-community/mathlib4/pull/40841#discussion_r3448504317 and https://github.com/leanprover-community/mathlib4/pull/40841#issuecomment-4762175719.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
114/97 |
Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Semi.lean,Mathlib/Algebra/Colimit/Module.lean,Mathlib/Algebra/Module/CharacterModule.lean,Mathlib/Algebra/Module/Equiv/Basic.lean,Mathlib/Algebra/Module/Presentation/Basic.lean,Mathlib/Algebra/Star/Module.lean,Mathlib/Analysis/Normed/Operator/LinearIsometry.lean,Mathlib/LinearAlgebra/Contraction.lean,Mathlib/LinearAlgebra/DirectSum/TensorProduct.lean,Mathlib/LinearAlgebra/Dual/Lemmas.lean,Mathlib/LinearAlgebra/ExteriorPower/Basic.lean,Mathlib/LinearAlgebra/Finsupp/LinearCombination.lean,Mathlib/LinearAlgebra/Matrix/SpecialLinearGroup.lean,Mathlib/LinearAlgebra/Multilinear/DFinsupp.lean,Mathlib/LinearAlgebra/Pi.lean,Mathlib/LinearAlgebra/PiTensorProduct/Basic.lean,Mathlib/LinearAlgebra/PiTensorProduct/DFinsupp.lean,Mathlib/LinearAlgebra/PiTensorProduct/Dual.lean,Mathlib/LinearAlgebra/Projection.lean,Mathlib/LinearAlgebra/Quotient/Basic.lean,Mathlib/LinearAlgebra/TensorProduct/Associator.lean,Mathlib/LinearAlgebra/TensorProduct/Basic.lean,Mathlib/LinearAlgebra/TensorProduct/DirectLimit.lean,Mathlib/LinearAlgebra/TensorProduct/Graded/External.lean,Mathlib/LinearAlgebra/TensorProduct/Map.lean,Mathlib/LinearAlgebra/TensorProduct/Pi.lean,Mathlib/LinearAlgebra/TensorProduct/Prod.lean,Mathlib/LinearAlgebra/TensorProduct/Quotient.lean,Mathlib/LinearAlgebra/TensorProduct/Subalgebra.lean,Mathlib/LinearAlgebra/TensorProduct/Submodule.lean,Mathlib/LinearAlgebra/TensorProduct/Tower.lean,Mathlib/LinearAlgebra/Trace.lean,Mathlib/RepresentationTheory/Coinvariants.lean,Mathlib/RepresentationTheory/FiniteIndex.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/LowDegree.lean,Mathlib/RingTheory/AdicCompletion/AsTensorProduct.lean,Mathlib/RingTheory/AdicCompletion/Functoriality.lean,Mathlib/RingTheory/Extension/Cotangent/Basis.lean,Mathlib/RingTheory/Flat/Equalizer.lean,Mathlib/RingTheory/IsTensorProduct.lean,Mathlib/RingTheory/Localization/Module.lean,Mathlib/RingTheory/MatrixAlgebra.lean,Mathlib/RingTheory/PicardGroup.lean |
44 |
24 |
['TJHeeringa', 'github-actions', 'j-loreaux', 'mathlib-bors', 'mathlib-merge-conflicts', 'themathqueen'] |
nobody |
1 |
10-66368 10 days ago |
11-6831 11 days ago |
25-49952 25 days |
| 41081 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add Subrepresentation.toRepresentation_apply and Subrepresentation.quotient |
Add a lemma for Subrepresentation recording the inherited group action. Help avoid unfold Subrepresentation.toRepresentation.
Add the quotient representation associated to a subrepresentaiton. It wraps up Representation.quotient and Representation.Subrepresentation. Help avoid writing down explicitly the stability condition required in Representation.quotient.
|
t-algebra
new-contributor
label:t-algebra$ |
26/0 |
Mathlib/RepresentationTheory/Subrepresentation.lean |
1 |
17 |
['JX-Mo', 'Whysoserioushah', 'github-actions'] |
nobody |
1 |
10-28833 10 days ago |
10-29440 10 days ago |
25-84873 25 days |
| 41308 |
sergantche author:sergantche |
feat: add `List.insertIdx_eraseIdx_getElem_perm` |
Adds `List.insertIdx_eraseIdx_getElem_perm`, showing that erasing an element by index and inserting it at any valid position gives a permutation of the original list.
This packages the existing lemmas `List.perm_insertIdx` and `List.getElem_cons_eraseIdx_perm` into a direct API lemma.
AI assistance was used in preparing this PR; I reviewed the statement and proof.
[](https://gitpod.io/from-referrer/) |
t-data
new-contributor
|
5/0 |
Mathlib/Data/List/Perm/Basic.lean |
1 |
4 |
['github-actions', 'sergantche', 'vlad902'] |
nobody |
1 |
9-57644 9 days ago |
9-60487 9 days ago |
13-63346 13 days |
| 38214 |
emlis42 author:emlis42 |
feat(Algebra/ContinuedFractions): add Euler's continued fraction |
This PR formalizes Euler continued fractions by providing `euler` which construct one by giving head term and coefficients with some basic property.
We also introduce a transformation `GenContFract.toEuler` that maps a generalized continued fraction `g : GenContFract K` to an equivalent Euler continued fraction. |
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
364/0 |
Mathlib.lean,Mathlib/Algebra/ContinuedFractions/Euler.lean |
2 |
74 |
['YaelDillies', 'emlis42', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
1 |
9-8694 9 days ago |
14-78428 14 days ago |
77-41975 77 days |
| 41645 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Combinatorics and Dynamics |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 5 file(s) in **Combinatorics and Dynamics**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated |
22/9 |
Mathlib/Combinatorics/Additive/FreimanHom.lean,Mathlib/Combinatorics/Hindman.lean,Mathlib/Combinatorics/SimpleGraph/Cayley.lean,Mathlib/Data/Finset/NoncommProd.lean,Mathlib/Dynamics/SymbolicDynamics/Basic.lean |
5 |
3 |
['b-mehta', 'github-actions'] |
nobody |
1 |
8-83558 8 days ago |
9-926 9 days ago |
9-2231 9 days |
| 37247 |
yuma-mizuno author:yuma-mizuno |
feat(GroupTheory/MonoidLocalization): add prime transport lemmas |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
awaiting-author
merge-conflict
|
75/7 |
Mathlib/GroupTheory/MonoidLocalization/MonoidWithZero.lean,Mathlib/RingTheory/Localization/Basic.lean,Mathlib/RingTheory/Localization/Defs.lean |
3 |
7 |
['github-actions', 'mathlib-merge-conflicts', 'riccardobrasca'] |
riccardobrasca assignee:riccardobrasca |
1 |
8-59695 8 days ago |
97-18994 97 days ago |
20-41780 20 days |
| 41082 |
wrenna-robson author:wrenna-robson |
feat(Logic/Function/Defs): add `Function.diag` |
Adds a name for the function `fun x => (x, x)`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
82/50 |
Mathlib/Data/Finset/Prod.lean,Mathlib/Data/Int/Cast/Prod.lean,Mathlib/Data/Nat/Cast/Prod.lean,Mathlib/Data/Set/Prod.lean,Mathlib/Logic/Function/Defs.lean,Mathlib/MeasureTheory/MeasurableSpace/Constructions.lean,Mathlib/NumberTheory/Height/Basic.lean,Mathlib/Order/Filter/Prod.lean,Mathlib/Probability/Independence/Conditional.lean,Mathlib/Probability/Kernel/Basic.lean,Mathlib/Probability/Kernel/Composition/MeasureComp.lean,Mathlib/Probability/Kernel/Composition/MeasureCompProd.lean,Mathlib/Probability/Kernel/Condexp.lean,Mathlib/Probability/Kernel/Deterministic.lean,Mathlib/Probability/Moments/SubGaussian.lean,Mathlib/Topology/Algebra/ProperAction/Basic.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Constructions/SumProd.lean,Mathlib/Topology/UniformSpace/UniformConvergence.lean |
19 |
31 |
['github-actions', 'themathqueen', 'wrenna-robson'] |
nobody |
1 |
8-17361 8 days ago |
8-20619 8 days ago |
21-9773 21 days |
| 39607 |
TentativeConvert author:TentativeConvert |
feat(Algebra/DirectSum): equivalence between direct sum indexed by ι₁ and double sum indexed by ι₂ and fibres of f : ι₁ → ι₂ |
1. Add variant `equivCongrLeft'` of `equivCongrLeft`, and corresponding `…_apply` lemma.
2. Add `…_of lemmas` for both `equivCongrLeft` and `equivCongrLeft'`.
3. Add `…of lemma` for `sigmaCurry`, i.e. `sigmaCurry_of`.
4. Add `sigmaFiberAddEquiv`: the equivalence between a direct sum indexed by a type `ι₁` and the double sum indexed by a type `ι₂` and the fibres of a map `f : ι₁ → ι₂`. Add two `…_apply` lemmas and an `…_of` lemma.
---
This is supposed to be a first step towards merging the draft PR #39356.
re 1: Mathematically, I don't see why one version should be preferred over the other, but I found the existing `equivCongrLeft` more difficult to work with when the equivalence `h : ι ≃ κ` is naturally given in the opposite direction. (I could not avoid explicit type casts through the equality `h.symm.symm = h` when defining `sigmaFiberAddEquiv` in terms of `equivCongrLeft`.)
Very unsure about the name of `equivCongrLeft'`. (I see that the name `equivCongrLeft` was chosen in analogy with `Equiv.piCongrLeft`. `Equiv.piCongrRight` looks very different, so presumably `equivCongrLeft'` should *not* be called `equivCongrRight`.)
re 4: Very unsure about the naming of the two different `…_apply` lemmas; called them `…_apply` and `…_apply'` for now. The second (`…_apply'`) cannot be a `simp` lemma as it would prevent the first (`…_apply`) from firing.
I've used Claude Opus for understanding error messages and git interaction, but everything is hand coded.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
maintainer-merge
label:t-algebra$ |
46/3 |
Mathlib/Algebra/DirectSum/Basic.lean |
1 |
48 |
['TentativeConvert', 'eric-wieser', 'github-actions', 'joneugster', 'themathqueen'] |
joneugster assignee:joneugster |
2 |
7-84227 7 days ago |
7-86209 7 days ago |
62-7977 62 days |
| 38830 |
Jun2M author:Jun2M |
feat(Data/List): Nodup and head & getLast lemmas |
Given a Nodup list:
* If a prefix contains the last element, they are equal
* If a suffix contains the first element, they are equal
* If an infix contains the first element, it is a prefix
* If an infix contains the last element, it is a suffix
* If the first and the last element are the same, it is a singleton
* `countP` is cardinality of the filter of `toFinset`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
awaiting-author
|
31/2 |
Mathlib/Data/Finset/Basic.lean,Mathlib/Data/Finset/Card.lean,Mathlib/Data/List/Nodup.lean |
3 |
18 |
['Jun2M', 'SnirBroshi', 'b-mehta', 'github-actions', 'joneugster', 'mathlib-merge-conflicts', 'ocfnash'] |
joneugster assignee:joneugster |
1 |
7-74998 7 days ago |
21-2916 21 days ago |
47-28078 47 days |
| 37603 |
Parcly-Taxel author:Parcly-Taxel |
refactor: review of `SetSemiring` |
* Rename `Set.up` and `SetSemiring.down` to `SetSemiring.ofSet` and `SetSemiring.toSet` respectively. Unprotect both and make them equivalences, following `FreeMonoid`.
* Derive `CompleteAtomicBooleanAlgebra` for `SetSemiring` immediately.
* Add `imageHom_id` and `imageHom_comp`. The three existing lemmas about `imageHom` are coalesced into `imageHom_apply`.
Ultimately inspired by https://github.com/leanprover-community/mathlib4/pull/36934#issuecomment-4183475568. |
t-data |
119/164 |
Mathlib/Algebra/Algebra/Operations.lean,Mathlib/Data/Set/Semiring.lean |
2 |
45 |
['Parcly-Taxel', 'YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'ocfnash', 'sgouezel'] |
nobody |
1 |
7-50752 7 days ago |
7-52732 7 days ago |
43-62980 43 days |
| 35812 |
khwilson author:khwilson |
feat(MeasureTheory/Group/GeometryOfNumbers): successive minima and existence of a directional basis |
Define the successive minima of a discrete subgroup of a real vector space with respect to a convex set. These invariants show up throughout the geometry of numbers and are the focus of Minkowski's Second Theorem (whose statement is left here with a `proof_wanted`).
Note: The key lemma is that the "gauge set" of the convex set is closed. I took the approach of showing that it is sequentially closed. There's an alternative approach via showing it's the union of a finite number of closed sets. I personally thought this approach was more intuitive, but the union approach may result in a slightly shorter proof.
Co-authored-by: Yaël Dillies <yael.dillies@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [x] depends on: #xyz [optional extra text]
-->
- [x] depends on #37738
- [x] depends on #37740
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-measure-probability
|
350/36 |
Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Analysis/Convex/Basic.lean,Mathlib/Analysis/Convex/Body.lean,Mathlib/Analysis/Convex/Gauge.lean,Mathlib/LinearAlgebra/FiniteDimensional/Basic.lean,Mathlib/MeasureTheory/Group/GeometryOfNumbers.lean,Mathlib/NumberTheory/NumberField/Units/Regulator.lean |
7 |
98 |
['Vierkantor', 'YaelDillies', 'github-actions', 'joneugster', 'khwilson', 'mathlib-merge-conflicts', 'ocfnash', 'sgouezel'] |
nobody |
1 |
7-45950 7 days ago |
12-71767 12 days ago |
75-60283 75 days |
| 41596 |
teorth author:teorth |
feat(Archive/RiemannStieltjes): archived version of the Riemann-Stieltjes and Riemann integrals |
Construction of the Riemann and Riemann-Stieltjes integrals, based on the BoxIntegral API. These notions are weaker than the Bochner and vector-valued integrals already in Mathlib, so after the discussion in #41108 and https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/What.20to.20do.20with.20weak.20but.20standard.20math.2C.20e.2Eg.2E.20Riemann.20integ.3F , the basic definitions are being PR'ed to Archive rather than Mathlib.
---
The code was primarily human-generated, but AI was used to review the submission.
- [ ] depends on: #41592
[](https://gitpod.io/from-referrer/)
|
t-analysis |
546/3 |
Archive.lean,Archive/RiemannStieltjes.lean,Mathlib/Analysis/BoxIntegral/Basic.lean,Mathlib/Analysis/BoxIntegral/Partition/Additive.lean |
4 |
2 |
['github-actions', 'madvorak', 'mathlib-dependent-issues'] |
nobody |
1 |
7-23499 7 days ago |
9-15915 9 days ago |
9-17844 9 days |
| 40040 |
JovanGerb author:JovanGerb |
chore(Order/Bounds/Basic): add missing `to_dual` tags |
This PR adds some `to_dual` tags that weren't added in #35208
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
43/68 |
Mathlib/Order/Bounds/Basic.lean |
1 |
1 |
['github-actions', 'madvorak', 'vihdzp'] |
nobody |
2 |
7-22418 7 days ago |
53-15595 53 days ago |
53-15059 53 days |
| 40855 |
NoahW314 author:NoahW314 |
feat(Data/ENNReal): add `sum_div` |
`Finset.sum_div` does not apply since `ℝ≥0∞` is not a `DivisionSemiring`. Although the proof of `Finset.sum_div` (and of this lemma) only needs `DivInvMonoid` and `NonUnitalNonAssocSemiring`, the best typeclass including these is `DivisionSemiring`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
Removed the `open ENNReal` in `MeanInequalities` to avoid ambiguity with `Finset.sum_div`.
|
t-data |
7/1 |
Mathlib/Analysis/MeanInequalities.lean,Mathlib/Data/ENNReal/BigOperators.lean |
2 |
2 |
['SnirBroshi', 'github-actions', 'madvorak'] |
nobody |
1 |
7-21968 7 days ago |
31-52883 31 days ago |
31-52885 31 days |
| 40310 |
felixpernegger author:felixpernegger |
chore(Algebra): remove an `erw` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
3/4 |
Mathlib/Algebra/Ring/Divisibility/Basic.lean |
1 |
10 |
['felixpernegger', 'github-actions', 'grunweg', 'j-loreaux', 'madvorak', 'mathlib-bors'] |
nobody |
1 |
7-20975 7 days ago |
33-5914 33 days ago |
34-31965 34 days |
| 40276 |
gasparattila author:gasparattila |
feat(Order/Partition/Finpartition): lemmas for `restrict` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
34/1 |
Mathlib/Order/Partition/Finpartition.lean |
1 |
1 |
['github-actions', 'madvorak'] |
nobody |
1 |
7-19837 7 days ago |
46-57216 46 days ago |
46-56680 46 days |
| 41291 |
tb65536 author:tb65536 |
refactor(RingTheory/IntegralClosure/IsIntegral/Basic): use `FaithfulSMul` in `isIntegral_algebraMap_iff` |
Currently `isIntegral_algebraMap_iff` takes an explicit assumption stating that `algebraMap A B` is nonzero, but a `[FaithfulSMul A B]` typeclass is more idiomatic (and can almost always be inferred automatically).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
25/30 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Algebra.lean,Mathlib/NumberTheory/Niven.lean,Mathlib/NumberTheory/NumberField/CMField.lean,Mathlib/NumberTheory/NumberField/Cyclotomic/Basic.lean,Mathlib/RingTheory/Adjoin/PowerBasis.lean,Mathlib/RingTheory/IntegralClosure/IntegralRestrict.lean,Mathlib/RingTheory/IntegralClosure/IntegrallyClosed.lean,Mathlib/RingTheory/IntegralClosure/IsIntegral/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Defs.lean,Mathlib/RingTheory/Invariant/Galois.lean,Mathlib/RingTheory/IsGaloisGroup/Basic.lean,Mathlib/RingTheory/Norm/Transitivity.lean,Mathlib/RingTheory/Trace/Basic.lean,Mathlib/RingTheory/ZariskisMainTheorem.lean |
15 |
2 |
['github-actions', 'plp127'] |
nobody |
1 |
6-80803 6 days ago |
6-85481 6 days ago |
20-1734 20 days |
| 41361 |
lakesare author:lakesare |
feat(Order/ConditionallyCompleteLattice/Finset): add `sup_eq_ciSup` |
From the Carleson project.
___
**Upstreaming from Carleson: [/Carleson/ToMathlib/Data/Finset/Lattice/Fold.lean](https://github.com/fpvandoorn/carleson/blob/a3e427dc0f23f6b818c7f7d32f2b1d2ccfab1f21/Carleson/ToMathlib/Data/Finset/Lattice/Fold.lean)**
Changes from the Carleson version:
1. `sup_eq_iSup'` is refactored (to shorten the proof & to make some of the imports unnecessary)
2. `sup_eq_iSup'` is renamed to `sup_eq_ciSup`
3. Carleson-suggested file was `/Data/Finset/Lattice/Fold.lean`, but we placed the theorem into `/Order/ConditionallyCompleteLattice/Finset.lean`
|
carleson
new-contributor
t-order
|
7/4 |
Mathlib/Order/ConditionallyCompleteLattice/Finset.lean |
1 |
17 |
['SnirBroshi', 'github-actions', 'j-loreaux', 'lakesare'] |
nobody |
1 |
6-57058 6 days ago |
8-57425 8 days ago |
9-3567 9 days |
| 38328 |
astrainfinita author:astrainfinita |
feat: `OrderSupSet` |
This PR introduces `OrderSupSet` and `OrderInfSet`, which are typeclasses expressing that `sSup` (resp., `sInf`) returns the least upper bound (resp., the greatest lower bound) of a set whenever one exists.
This allows us to prove properties about the `sSup` of specific sets (such as `∅`, singletons, finite sets, and `univ`) without any typeclasses asserting the existence of LUBs. For example, `sSup ∅ = ⊥` holds for any type equipped with `OrderBot` `OrderSupSet`, no longer requiring typeclasses like `ConditionallyCompleteLinearOrderBot`.
For a general set `s`, this gives a uniform way to extend results about `IsLUB s a → motive a` to `motive (sSup s)`, `motive (⨆ i, f i)`, `motive (a ⊔ b)`, etc., which allows proof reuse for basic API such as [`csSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/ConditionallyCompleteLattice/Basic.html#csSup_insert), [`iSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/CompleteLattice/Basic.html#iSup_insert), and [`sSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/CompleteLattice/Basic.html#sSup_insert) and downstream code like [`csSup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Pointwise/CompleteLattice.html#csSup_add), [`sSup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Pointwise/CompleteLattice.html#sSup_add), and [`sup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Lattice.html#sup_add).
Furthermore, this allows us to refactor incrementally, reducing the dependency of results about various completeness typeclasses on the specific implementation of `sSup`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/Any.20infimum.20based.20version.20of.20.60OmegaCompletePartialOrder.60.3F)
[](https://gitpod.io/from-referrer/)
|
t-order |
156/73 |
Mathlib/MeasureTheory/OuterMeasure/Induced.lean,Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/Bounds/Defs.lean,Mathlib/Order/CompleteLattice/Basic.lean,Mathlib/Order/CompleteLattice/Defs.lean,Mathlib/Order/SetNotation.lean,Mathlib/Topology/UniformSpace/OfCompactT2.lean |
7 |
16 |
['JovanGerb', 'astrainfinita', 'b-mehta', 'github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'openendings', 'vihdzp'] |
nobody |
1 |
6-49706 6 days ago |
74-27028 74 days ago |
79-57200 79 days |
| 38906 |
lua-vr author:lua-vr |
feat(ConditionallyCompleteLattice/Indexed): add binary versions of lemmas |
Add binary versions of some of the lemmas. Those are useful when the domain is indexed over the members of a set.
From the Carleson project.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
carleson
|
21/5 |
Mathlib/Order/ConditionallyCompleteLattice/Indexed.lean |
1 |
19 |
['JovanGerb', 'SnirBroshi', 'github-actions', 'grunweg', 'lua-vr', 'mathlib-merge-conflicts'] |
nobody |
1 |
6-49704 6 days ago |
64-1434 64 days ago |
73-61211 73 days |
| 39438 |
SnirBroshi author:SnirBroshi |
chore(Order/WellFounded): use `to_dual` |
Creates `argmax`/`argmaxOn` duals to the existing `argmin`/`argminOn`,
and `WellFoundedLT.min`/`WellFoundedGT.max` in order to properly dualize `WellFounded.min_le`.
Some theorems about `WellFounded{LT/GT}` which didn't have a dual before have to be renamed to make room,
e.g. `StrictMono.range_inj` is renamed to `StrictMono.range_inj_of_wellFoundedLT`.
---
This is blocking dualizing things in `ConditionallyCompleteLattice/Basic.lean`.
`WellFounded.min_le` has ~30 usages in ~10 files, so deprecating it should probably happen in a separate PR.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
83/34 |
Mathlib/Data/Finset/Sort.lean,Mathlib/Order/Hom/Set.lean,Mathlib/Order/WellFounded.lean,Mathlib/SetTheory/Ordinal/Enum.lean,Mathlib/Tactic/Translate/ToDual.lean |
5 |
10 |
['JovanGerb', 'SnirBroshi', 'github-actions', 'vihdzp'] |
nobody |
1 |
6-49703 6 days ago |
67-46860 67 days ago |
67-54920 67 days |
| 36605 |
martinwintermath author:martinwintermath |
feat(Geometry/Convex/Cone): Add lemmas about interaction of hull, span and negation |
Prove lemmas about the interaction of hull, span and negation.
Main additions:
* `PointedCone.toSubmodule` that produces a submodule with the same support given that `-C = C`. Also the corresponding `CanLift`
* `PointedCone.hull_neg_pair_eq_span_singleton` proving `hull R {-x, x} = R ∙ x` (simp lemma)
* `PointedCone.span_eq_hull_neg_sup_hull` proving `span R s = hull R (-s) ⊔ hull R s`
* `PointedCone.mem_span` proving `x ∈ span R C ↔ ∃ p, n ∈ C, x = p - n`
Considerations: there are several ways to express that a convex cone is a submodule:
* `-C = C`
* `-C ≤ C` or `C ≤ -C`
* `C = span R C`
* `C = C.lineal`
The consensus was that the the first option is the most direct way to express this property, which then allows to lift to a submodule.
Co-authored by: Olivia Röhrig, Kilian Rueß, Artie Khovanov
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37464
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry |
65/0 |
Mathlib/Geometry/Convex/Cone/Pointed.lean |
1 |
74 |
['YaelDillies', 'artie2000', 'github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
1 |
6-49694 6 days ago |
57-66615 57 days ago |
74-66685 74 days |
| 37870 |
Jun2M author:Jun2M |
feat(Combinatorics/Graph): `Simple` typeclass for `Graph` |
This PR introduces two type classes on `Graph`: `Loopless` and `Simple`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
delegated
|
141/0 |
Mathlib.lean,Mathlib/Combinatorics/Graph/Simple.lean |
2 |
11 |
['Jun2M', 'YaelDillies', 'b-mehta', 'github-actions', 'madvorak', 'mathlib-bors', 'mathlib-merge-conflicts', 'ocfnash'] |
nobody |
3 |
6-24781 6 days ago |
6-24782 6 days ago |
83-60469 83 days |
| 41260 |
SnirBroshi author:SnirBroshi |
feat(GroupTheory/Exponent): the order of a group divides a power of its exponent |
For finite groups:
- `(Monoid.exponent G).primeFactors = (Nat.card G).primeFactors`
- `Nat.card G ∣ Monoid.exponent G ^ Nat.card G`
---
This requires importing Cauchy's theorem (`GroupTheory.Perm.Cycle.Type`) in `Exponent.lean` which I'm not sure about, but the alternatives are either moving the theorems to `PGroup.lean`, or creating a new file with a strange name like `ExponentLemmas.lean`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
large-import
|
27/5 |
Mathlib/GroupTheory/Exponent.lean,Mathlib/GroupTheory/Perm/Cycle/Type.lean |
2 |
13 |
['SnirBroshi', 'github-actions', 'ocfnash', 'tb65536'] |
tb65536 assignee:tb65536 |
1 |
6-7059 6 days ago |
19-72248 19 days ago |
20-18959 20 days |
| 41794 |
ajirving author:ajirving |
style: fix by on newline |
Fixes some instances of by being on a newline or the first line of the
proof rather than the final line of the declaration (as required by
Mathlib style).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
easy |
34/33 |
Mathlib/Algebra/Homology/Factorizations/CM5a.lean,Mathlib/Algebra/SkewPolynomial/Basic.lean,Mathlib/AlgebraicTopology/SimplexCategory/GeneratorsRelations/Basic.lean,Mathlib/Analysis/InnerProductSpace/Projection/Minimal.lean,Mathlib/Analysis/InnerProductSpace/SingularValues.lean,Mathlib/CategoryTheory/Sites/Descent/DescentDataAsCoalgebra.lean,Mathlib/Geometry/Convex/Cone/Dual.lean,Mathlib/Geometry/Convex/Cone/Face/Basic.lean,Mathlib/Geometry/Euclidean/Circumcenter.lean,Mathlib/Geometry/Euclidean/Simplex.lean,Mathlib/GroupTheory/Index.lean,Mathlib/MeasureTheory/Integral/CircleAverage.lean,Mathlib/NumberTheory/LSeries/ZetaZeros.lean,Mathlib/NumberTheory/SelbergSieve.lean,Mathlib/RingTheory/Polynomial/DegreeLT.lean |
15 |
6 |
['ajirving', 'felixpernegger', 'github-actions'] |
nobody |
1 |
5-77771 5 days ago |
5-82470 5 days ago |
6-974 6 days |
| 41248 |
tb65536 author:tb65536 |
chore(NumberTheory/RamificationInertia/Basic): deprecate file |
This PR deprecates `NumberTheory/RamificationInertia/Basic.lean` in favor of `RingTheory/RamificationInertia/Basic.lean`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
t-number-theory
label:t-algebra$ |
40/6 |
Mathlib/NumberTheory/RamificationInertia/Basic.lean |
1 |
6 |
['Multramate', 'github-actions', 'grunweg', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
1 |
5-66803 5 days ago |
5-70902 5 days ago |
20-6704 20 days |
| 41213 |
tb65536 author:tb65536 |
chore(GroupTheory/Torsion): rename `IsTorsion` to `IsMulTorsion` |
`GroupTheory/Torsion.lean` has some bad to_additive translations. This PR fixes this by renaming `Monoid.IsTorsion` to `IsMulTorsion` and `AddMonoid.IsTorsion` to `IsAddTorsion`. This also aligns better with `IsMulTorsionFree` and `IsAddTorsionFree`.
This PR has a lot of deprecations, but you can check the lean-aware declarations diff to make sure I didn't miss anything.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
177/96 |
Mathlib/Algebra/Module/Torsion/Basic.lean,Mathlib/GroupTheory/FiniteAbelian/Basic.lean,Mathlib/GroupTheory/Torsion.lean |
3 |
36 |
['Multramate', 'github-actions', 'tb65536'] |
Multramate assignee:Multramate |
1 |
5-66456 5 days ago |
21-828 21 days ago |
21-18755 21 days |
| 40551 |
emlis42 author:emlis42 |
feat(SetTheory/Ordinal): prove that `ε₀` and `Γ₀` are countable |
This PR proves that `ε₀` and `Γ₀` are countable, i.e. `Countable (ToType ε₀)` and `Countable (ToType Γ₀)`.
This completes a TODO in `SetTheory/Ordinal/Veblen.lean`. |
t-set-theory
large-import
|
144/2 |
Mathlib/SetTheory/Cardinal/Aleph.lean,Mathlib/SetTheory/Cardinal/Ordinal.lean,Mathlib/SetTheory/Ordinal/Basic.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/Ordinal/Veblen.lean |
5 |
53 |
['emlis42', 'felixpernegger', 'github-actions', 'plp127', 'vihdzp'] |
jjdishere assignee:jjdishere |
1 |
5-50611 5 days ago |
32-40915 32 days ago |
39-82375 39 days |
| 39868 |
JuanCoRo author:JuanCoRo |
feat(Algebra/Polynomial): linearity of `divByMonic` and adjacent results |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This PR adds the `R`-linearity of the monic polynomial division map `_ /ₘ q`. It also adds adjacent results that stem from this work.
#### Refactors:
- Reuses the proofs from `add_modByMonic` and `smul_modByMonic` to generalize these results to `add_div_modByMonic` and `smul_div_modByMonic` respectively.
- Replaces the proofs of `add_modByMonic` and `smul_modByMonic` as specializations of the more general theorems `add_div_modByMonic` and `smul_div_modByMonic` respectively.
#### Additions:
- Adds the necessary results for `_ /ₘ q` linearity:
- `add_divByMonic : (p₁ + p₂) /ₘ q = p₁ /ₘ q + p₂ /ₘ q`
- `smul_divByMonic : c • p /ₘ q = c • (p /ₘ q)`
- Adds `_ /ₘ q` as an `R`-linear map:
- `divByMonicHom`: definition of `_ /ₘ q` as a linear map
- `mem_ker_divByMonic`: kernel characterization for `_ /ₘ q`.
- In `Div.lean` adds dual results for `/ₘ` that were already present for `%ₘ`
- `neg_divByMonic : (-p) /ₘ q = -(p /ₘ q)`
- `sub_divByMonic : (p₁ - p₂) /ₘ q = p₁ /ₘ q - p₂ /ₘ q`
- `mul_divByMonic_assoc (hd : q ∣ p₂) : (p₁ * p₂) /ₘ q = p₁ * (p₂ /ₘ q)`
While `mul_divByMonic_assoc` is not exactly the dual of `mul_modByMonic`, I thought it wouldn't hurt to add it.
[](https://gitpod.io/from-referrer/) |
new-contributor
t-algebra
label:t-algebra$ |
54/17 |
Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Polynomial/RingDivision.lean |
2 |
8 |
['JuanCoRo', 'github-actions', 'wwylele'] |
nobody |
1 |
5-49697 5 days ago |
54-12972 54 days ago |
54-12515 54 days |
| 39287 |
xgenereux author:xgenereux |
feat(Localization/AtPrime/Basic): upgrade `equivQuotMaximalIdeal` to an AlgEquiv |
The definition [IsLocalization.AtPrime.equivQuotMaximalIdealPow](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/Localization/AtPrime/Basic.html#IsLocalization.AtPrime.equivQuotMaximalIdealPow) was added in #36783.
The case with `n = 1` is still important and interesting. I have upgraded it to an AlgEquiv using `equivQuotMaximalIdealPow`.
This did break a few small things, because we need to bridge back to a `RingEquiv` in some places. I took the liberty to add some missing `apply` lemmas to ease fixing these proofs.
Disclaimer: I used Claude to suggest the first shot and refined it from there.
Co-authored-by: María Inés de Frutos Fernández <[mariaines.dff@gmail.com](mailto:mariaines.dff@gmail.com)>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
merge-conflict
|
45/65 |
Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/Localization/AtPrime/Extension.lean,Mathlib/RingTheory/Trace/Quotient.lean |
3 |
3 |
['github-actions', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
1 |
5-49563 5 days ago |
5-49564 5 days ago |
48-25013 48 days |
| 40292 |
felixpernegger author:felixpernegger |
chore: replace `by calc` by `calc` whenever possible |
Avoids unnecessarily going into tactic mode, similar to #40223.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
212/212 |
Archive/Imo/Imo1981Q3.lean,Archive/Imo/Imo1982Q1.lean,Archive/Imo/Imo1982Q3.lean,Archive/Imo/Imo2005Q3.lean,Archive/Imo/Imo2024Q3.lean,Archive/Imo/Imo2025Q3.lean,Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/BigOperators/Group/Finset/Indicator.lean,Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/MvPolynomial/SchwartzZippel.lean,Mathlib/Algebra/Order/Floor/Ring.lean,Mathlib/Algebra/Order/Floor/Semifield.lean,Mathlib/Algebra/Order/Ring/Unbundled/Basic.lean,Mathlib/Algebra/Order/Sub/Defs.lean,Mathlib/Algebra/Polynomial/Coeff.lean,Mathlib/Algebra/Ring/Invertible.lean,Mathlib/Analysis/CStarAlgebra/Module/Defs.lean,Mathlib/Analysis/Calculus/BumpFunction/Normed.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Analysis/Complex/AbelLimit.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/Complex/ValueDistribution/FirstMainTheorem.lean,Mathlib/Analysis/Complex/ValueDistribution/Proximity/Basic.lean,Mathlib/Analysis/Convex/Caratheodory.lean,Mathlib/Analysis/Convex/Continuous.lean,Mathlib/Analysis/Convex/Visible.lean,Mathlib/Analysis/Hofer.lean,Mathlib/Analysis/InnerProductSpace/Defs.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/Matrix/Normed.lean,Mathlib/Analysis/Meromorphic/Divisor.lean,Mathlib/Analysis/Normed/Field/Approximation.lean,Mathlib/Analysis/ODE/DiscreteGronwall.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean,Mathlib/Analysis/SpecialFunctions/Integrals/LogTrigonometric.lean,Mathlib/Analysis/SpecialFunctions/Integrals/PosLogEqCircleAverage.lean,Mathlib/Analysis/SpecialFunctions/JapaneseBracket.lean,Mathlib/Analysis/SpecialFunctions/Log/Base.lean,Mathlib/Analysis/SpecialFunctions/Log/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Stirling.lean,Mathlib/CategoryTheory/Bicategory/Adjunction/Basic.lean,Mathlib/CategoryTheory/Bicategory/Adjunction/Mate.lean,Mathlib/CategoryTheory/Bicategory/NaturalTransformation/Lax.lean,Mathlib/CategoryTheory/Bicategory/NaturalTransformation/Oplax.lean,Mathlib/CategoryTheory/Equivalence.lean,Mathlib/CategoryTheory/Limits/Types/Products.lean,Mathlib/CategoryTheory/Localization/Composition.lean,Mathlib/CategoryTheory/MarkovCategory/Positive.lean,Mathlib/CategoryTheory/Monoidal/DayConvolution.lean,Mathlib/CategoryTheory/Monoidal/Rigid/Basic.lean,Mathlib/Combinatorics/Additive/AP/Three/Behrend.lean,Mathlib/Combinatorics/Additive/Energy.lean,Mathlib/Combinatorics/Additive/ErdosGinzburgZiv.lean,Mathlib/Combinatorics/Additive/SubsetSum.lean,Mathlib/Combinatorics/Additive/VerySmallDoubling.lean,Mathlib/Combinatorics/SetFamily/LYM.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Uniform.lean,Mathlib/Combinatorics/SimpleGraph/Triangle/Removal.lean,Mathlib/Computability/AkraBazzi/AkraBazzi.lean,Mathlib/Computability/AkraBazzi/GrowsPolynomially.lean,Mathlib/Computability/AkraBazzi/SumTransform.lean,Mathlib/Data/Fintype/BigOperators.lean,Mathlib/Data/List/PeriodicityLemma.lean,Mathlib/Data/Nat/Choose/Vandermonde.lean,Mathlib/Data/Nat/Factorial/Basic.lean,Mathlib/Data/Rat/Floor.lean,Mathlib/FieldTheory/Finite/Basic.lean,Mathlib/FieldTheory/Minpoly/IsConjRoot.lean,Mathlib/Geometry/Manifold/Instances/Real.lean,Mathlib/Geometry/Manifold/VectorBundle/CovariantDerivative/Basic.lean,Mathlib/Geometry/Manifold/VectorBundle/Tensoriality.lean,Mathlib/GroupTheory/SpecificGroups/Quaternion.lean,Mathlib/InformationTheory/KullbackLeibler/Basic.lean,Mathlib/LinearAlgebra/AffineSpace/Matrix.lean,Mathlib/LinearAlgebra/Eigenspace/Basic.lean,Mathlib/LinearAlgebra/Matrix/Determinant/Basic.lean,Mathlib/LinearAlgebra/Matrix/Invertible.lean,Mathlib/LinearAlgebra/RootSystem/RootPositive.lean,Mathlib/MeasureTheory/Constructions/HaarToSphere.lean,Mathlib/MeasureTheory/Covering/Vitali.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/Basic.lean,Mathlib/MeasureTheory/Function/LpSeminorm/CompareExp.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Count.lean,Mathlib/MeasureTheory/Integral/Bochner/ContinuousLinearMap.lean,Mathlib/MeasureTheory/Integral/BoundedContinuousFunction.lean,Mathlib/MeasureTheory/Integral/CircleAverage.lean,Mathlib/MeasureTheory/Integral/Gamma.lean,Mathlib/MeasureTheory/Integral/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Integral/MeanInequalities.lean,Mathlib/MeasureTheory/Integral/MeanValue.lean,Mathlib/MeasureTheory/Measure/AddContent.lean,Mathlib/MeasureTheory/Measure/Count.lean,Mathlib/MeasureTheory/Measure/FiniteMeasure.lean,Mathlib/MeasureTheory/Measure/LevyConvergence.lean,Mathlib/MeasureTheory/Measure/LogLikelihoodRatio.lean,Mathlib/MeasureTheory/Measure/PreVariation.lean,Mathlib/NumberTheory/Chebyshev.lean,Mathlib/NumberTheory/FLT/MasonStothers.lean |
140 |
6 |
['github-actions', 'madvorak', 'mathlib-merge-conflicts'] |
nobody |
1 |
5-47073 5 days ago |
5-47074 5 days ago |
34-17484 34 days |
| 41427 |
YaelDillies author:YaelDillies |
refactor(Algebra/MvPolynomial): delete `coeff` |
... without a deprecation because we want dot notation to resolve to `AddMonoidAlgebra.coeff`.
For migration, replace bare `MvPolynomial.coeff`s with `AddMonoidAlgebra.coeff`. Dot notation `.coeff` will resolve to `AddMonoidAlgebra.coeff` without further change. `MvPolynomial.coeff m p` corresponds to `AddMonoidAlgebra.coeff p m`, so you will need to swap arguments. Note further that `AddMonoidAlgebra.coeff p` is bundled as a `Finsupp` while `MvPolynomial.coeff` is a bare function.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
label:t-algebra$ |
243/245 |
Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Division.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/MvPolynomial/Eval.lean,Mathlib/Algebra/MvPolynomial/Funext.lean,Mathlib/Algebra/MvPolynomial/Monad.lean,Mathlib/Algebra/MvPolynomial/Nilpotent.lean,Mathlib/Algebra/MvPolynomial/NoZeroDivisors.lean,Mathlib/Algebra/MvPolynomial/PDeriv.lean,Mathlib/Algebra/MvPolynomial/Rename.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Combinatorics/Nullstellensatz.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/RingTheory/Extension/Generators.lean,Mathlib/RingTheory/Extension/Presentation/Basic.lean,Mathlib/RingTheory/MvPolynomial/Basic.lean,Mathlib/RingTheory/MvPolynomial/FreeCommRing.lean,Mathlib/RingTheory/MvPolynomial/Groebner.lean,Mathlib/RingTheory/MvPolynomial/Homogeneous.lean,Mathlib/RingTheory/MvPolynomial/IrreducibleQuadratic.lean,Mathlib/RingTheory/MvPolynomial/MonomialOrder.lean,Mathlib/RingTheory/MvPolynomial/WeightedHomogeneous.lean,Mathlib/RingTheory/MvPowerSeries/Basic.lean,Mathlib/RingTheory/MvPowerSeries/Trunc.lean,Mathlib/RingTheory/NoetherNormalization.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Polynomial/IsIntegral.lean,Mathlib/RingTheory/Polynomial/Quotient.lean,Mathlib/RingTheory/Spectrum/Prime/Polynomial.lean,Mathlib/RingTheory/TensorProduct/MvPolynomial.lean |
35 |
11 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
nobody |
1 |
5-33931 5 days ago |
5-35435 5 days ago |
14-5072 14 days |
| 35349 |
RemyDegenne author:RemyDegenne |
feat: data processing inequality for the Kullback-Leibler divergence |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #34841
- [x] depends on: #35089
- [x] depends on: #27953
- [x] depends on: #39819
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
maintainer-merge
|
290/24 |
Mathlib.lean,Mathlib/Analysis/Convex/Continuous.lean,Mathlib/InformationTheory/KullbackLeibler/DataProcessing.lean,Mathlib/MeasureTheory/Measure/Decomposition/IntegralRNDeriv.lean |
4 |
16 |
['EtienneC30', 'RemyDegenne', 'VictorBoscaro', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
EtienneC30 assignee:EtienneC30 |
1 |
5-26390 5 days ago |
6-19099 6 days ago |
21-18795 21 days |
| 41835 |
pepamontero author:pepamontero |
feat: add `orbitRel.Quotient.quotient_smul_eq` and `Homeomorph.smul_symm` |
Two small, independent lemmas separated from PR #40727 (proving the orbit space inherits `IsManifold` structure), since neither depends on manifolds and both are useful on their own:
* `orbitRel.Quotient.quotient_smul_eq`: in the quotient by `MulAction.orbitRel`, `⟦g • a⟧ = ⟦a⟧` for any `g`.
* `Homeomorph.smul_symm`: the inverse of the homeomorphism `Homeomorph.smul g` is `Homeomorph.smul g⁻¹`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
8/0 |
Mathlib/GroupTheory/GroupAction/Defs.lean,Mathlib/Topology/Algebra/ConstMulAction.lean |
2 |
7 |
['felixpernegger', 'github-actions', 'pepamontero'] |
nobody |
1 |
5-19279 5 days ago |
5-21671 5 days ago |
5-29980 5 days |
| 39755 |
wwylele author:wwylele |
chore(GroupTheory): remove a defeq abuse |
---
I am not sure if this is the right change to make, so I'd like to start a discussion from this. The issue here seems to be that the simp lemma [MulAction.orbitRel.Quotient.orbit_mk](https://leanprover-community.github.io/mathlib4_docs/Mathlib/GroupTheory/GroupAction/Defs.html#MulAction.orbitRel.Quotient.orbit_mk) fired and changed the underlying type of variables in the expression, which is not defeq at instance transparency, and fails defeq check for `MulAction` ([MulAction.instElemOrbit](https://leanprover-community.github.io/mathlib4_docs/Mathlib/GroupTheory/GroupAction/Defs.html#MulAction.instElemOrbit) vs [MulAction.instElemOrbit_1](https://leanprover-community.github.io/mathlib4_docs/Mathlib/GroupTheory/GroupAction/Defs.html#MulAction.instElemOrbit_1)). The easy change here is to disable the offending simp, but it feels like a common language pitfall. Should we do either of the following instead?
- remove `MulAction.orbitRel.Quotient.orbit_mk` from default simp set
- Make the the orbit definition more transparent
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-group-theory
awaiting-author
|
1/2 |
Mathlib/GroupTheory/GroupAction/Basic.lean |
1 |
1 |
['Multramate', 'github-actions', 'joneugster'] |
nobody |
1 |
5-16878 5 days ago |
5-16878 5 days ago |
54-54937 54 days |
| 37067 |
kbuzzard author:kbuzzard |
feat: add_group tactic |
Written by Claude Code, additivising the `group` tactic, although there were some problems which needed human input.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
This is me burning Claude credits as a result of this comment [#mathlib4 > MulAut and to_additive @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/MulAut.20and.20to_additive/near/581059625) . Just to be clear, all comments below are human-written by me with 0 AI assistance.
To my amusement, naively additivising the `group` tactic to make an `add_group` tactic does not work. The problem is that the algorithm run by `group` involves adding `← zpow_neg_one` to the simp set, which rewrites `x⁻¹` to `x ^ (-1)` for `x` in any group: the idea is that `x ^ (z : Int)` is preferred in the algorithm and `x⁻¹` is eliminated. Amusingly, when additivised, this becomes `-x -> -1 • x` which then immediately becomes `(-1 • 1) • x` which then becomes `((-1 • 1) • 1) • x` etc etc, as the integers are themselves an additive group. So we need to find another way of normalising terms of the form `-x`. The idea is to simply prove a bunch more simp lemmas which will deal with things like `-x + x` etc.
|
t-meta
LLM-generated
maintainer-merge
|
207/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/AddGroup.lean,MathlibTest/Tactic/AddGroup.lean |
4 |
30 |
['JovanGerb', 'SnirBroshi', 'github-actions', 'joneugster', 'kbuzzard', 'mathlib-merge-conflicts', 'thorimur'] |
thorimur assignee:thorimur |
1 |
5-15926 5 days ago |
9-85507 9 days ago |
38-30451 38 days |
| 41479 |
YaelDillies author:YaelDillies |
feat(LinearAlgebra): dual of tensor is tensor of duals for finite projective modules |
Generalise this isomorphism and many similar ones from finite free to finite projective. To be able to deduce some isos from some other ones, I had to move them around in a preliminary PR. Note that #40297 made of the changes that the current PR was intending to do but not all, hence the slightly mangled diff.
Also change the defeq of `homTensorHomEquiv` so that it is *not* defeq to `homTensorHomMap` (but would be if `homTensorHomMap` became heterobasic). This makes `BilinForm.tensorDistribEquiv` defeq to `BilinForm.tensorDistrib`.
Also tag `LinearEquiv.congrRight` with `simps` to generate some required simp lemmas.
Human generated then golfed and edited with Claude Opus, then human-edited some more.
From FLT, PersistentDecomp
Co-authored-by: Edison Xie
Co-authored-by: Andrew Yang <the.erd.one@gmail.com>
Assisted-by: Claude Opus 4.8
---
This is a cleaned up version of #21829 reopened from a fork.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
125/95 |
Mathlib/Algebra/Module/Equiv/Basic.lean,Mathlib/LinearAlgebra/BilinearForm/TensorProduct.lean,Mathlib/LinearAlgebra/Contraction.lean,Mathlib/LinearAlgebra/TensorProduct/Map.lean,Mathlib/LinearAlgebra/Trace.lean |
5 |
13 |
['Deicyde', 'Whysoserioushah', 'YaelDillies', 'erdOne', 'github-actions', 'kbuzzard', 'mathlib-merge-conflicts'] |
nobody |
1 |
5-13644 5 days ago |
5-15719 5 days ago |
8-34873 8 days |
| 40724 |
justus-springer author:justus-springer |
feat(Analysis/InnerProductSpace): inner products on exterior powers |
Given a real inner product space `E`, we construct a canonical inner product on `⋀[ℝ]^n E` via the Gram determinant formula: on decomposable elements, `⟪v₁ ∧ ⋯ ∧ vₙ, w₁ ∧ ⋯ ∧ wₙ⟫ = det (⟪vⱼ, wᵢ⟫)ᵢⱼ`.
There are two generalizations of this construction: Going from `ℝ` to `RCLike`, and getting rid of the `FiniteDimensional` assumption. Both would require some prerequisites, hence they are left as future work for now (see the future work section of the module docstring).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
168/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/ExteriorPower.lean,Mathlib/Analysis/InnerProductSpace/GramMatrix.lean |
3 |
2 |
['github-actions', 'mckoen'] |
nobody |
1 |
5-12846 5 days ago |
34-7811 34 days ago |
34-8130 34 days |
| 41657 |
JovanGerb author:JovanGerb |
feat: `haveI`/`letI` tactic linter |
This PR implements a variation on the linter that was written by Claude in #41562. It suggest to use `have`/`let` instead of `haveI`/`letI` whenever the goal is a proposition.
See also https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/surprising.20have.2FhaveI.20kernel.20phenomenon/with/609718493
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
maintainer-merge
|
131/22 |
Archive/Imo/Imo2008Q3.lean,Archive/Imo/Imo2019Q2.lean,Archive/Wiedijk100Theorems/BallotProblem.lean,Archive/Wiedijk100Theorems/CubingACube.lean,Archive/Wiedijk100Theorems/FriendshipGraphs.lean,Counterexamples/CliffordAlgebraNotInjective.lean,Counterexamples/Phillips.lean,Counterexamples/SorgenfreyLine.lean,Counterexamples/ZeroDivisorsInAddMonoidAlgebras.lean,Mathlib.lean,Mathlib/Init.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Linter/HaveILetI.lean,MathlibTest/InstanceDiamonds.lean,MathlibTest/Linter/HaveILetI.lean,MathlibTest/Tactic/ITauto.lean,MathlibTest/TransImports.lean |
17 |
7 |
['JovanGerb', 'Vierkantor', 'github-actions', 'joneugster', 'thorimur'] |
joneugster assignee:joneugster |
2 |
5-12246 5 days ago |
7-43590 7 days ago |
7-59002 7 days |
| 41498 |
pepamontero author:pepamontero |
feat(Analysis/SpecificLimits/Normed): the sum ∑' n, n ^ k * r ^ n via Stirling numbers |
For `‖r‖ < 1`, compute `∑' n : ℕ, n ^ k * r ^ n` as the finite sum `∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j / (1 - r) ^ (j + 1)`, where `S(k, j)` are the Stirling numbers of the second kind.
**Motivation:** a special case of `tsum_sq_mul_geometric_of_norm_lt_one` over `ℂ` was proved in the FLT project and is generalized here to match the surrounding Mathlib API; the private FLT lemma can then be replaced by this one.
**Main additions to `Normed.lean`:**
- The general power formula:
- `hasSum_pow_mul_geometric_of_norm_lt_one'` / `tsum_pow_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n ^ k * r ^ n = ∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_pow_mul_geometric_of_norm_lt_one` / `tsum_pow_mul_geometric_of_norm_lt_one`: the same in a field, with `/ (1 - r) ^ (j + 1)`.
- The `descFactorial` special case that supplies each term of that sum:
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one'` / `tsum_descFactorial_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n.descFactorial j * r ^ n = j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one` / `tsum_descFactorial_mul_geometric_of_norm_lt_one`: the field versions, with `/ (1 - r) ^ (j + 1)`.
**Additions to other files:**
- `Combinatorics/Enumerative/Stirling.lean`: `Nat.pow_eq_sum_stirlingSecond_mul_descFactorial`, expressing every power `n ^ k` as a linear combination `n ^ k = ∑ j ∈ range (k + 1), stirlingSecond k j * n.descFactorial j`.
- `Data/Nat/Factorial/Basic.lean`: `Nat.descFactorial_mul_self`, the identity `n.descFactorial j * n = n.descFactorial (j + 1) + j * n.descFactorial j`, used in the induction proving the Stirling result above.
**Other changes:**
- `summable_pow_mul_geometric_of_norm_lt_one` (statement unchanged) is now a one-line consequence of the general formula; its previous proof via `ascPochhammer` is deleted, so the `RingTheory.Polynomial.Pochhammer` import is no longer needed.
- The statement of `summable_descFactorial_mul_geometric_of_norm_lt_one` changes from the shifted summand `(n + k).descFactorial k * r ^ n` to `n.descFactorial k * r ^ n`, to match the new `hasSum`/`tsum` lemmas. It had no other uses in Mathlib, and the shifted form is recoverable in one line from `summable_choose_mul_geometric_of_norm_lt_one`.
- The proof of `hasSum_coe_mul_geometric_of_norm_lt_one'` (`k = 1`) is simplified using the general formula, and the `k = 2` case is added: `∑' n, n ^ 2 * r ^ n = r * (1 + r) / (1 - r) ^ 3` (`hasSum_sq_mul_geometric_of_norm_lt_one'` and the three companion lemmas).
**Note**: redundant imports no longer needed because of changes to the code have not been removed yet since at least 5 other files depend on these as transitive imports.
**AI Disclosure**: this code originated in the FLT project, where an initial version was written by William Coram and Samuel Yin with AI assistance (Claude, later cleaned up with Codex). It has since been substantially rewritten for this PR; little of the original generated code remains.
Co-authored-by: Malhar A. Patel <142735852+Mal-Pat@users.noreply.github.com>
Co-authored-by: William Coram
Co-authored-by: Samuel Yin
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
t-analysis
maintainer-merge
|
195/83 |
Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/SpecialFunctions/OrdinaryHypergeometric.lean,Mathlib/Analysis/SpecialFunctions/Pochhammer.lean,Mathlib/Analysis/SpecialFunctions/PolynomialExp.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Basic.lean,Mathlib/Analysis/SpecificLimits/Normed.lean,Mathlib/Combinatorics/Enumerative/Stirling.lean,Mathlib/Data/Nat/Factorial/Basic.lean,Mathlib/InformationTheory/Coding/KraftMcMillan.lean,Mathlib/Topology/Instances/CantorSet.lean |
11 |
34 |
['Mal-Pat', 'YaelDillies', 'github-actions', 'grunweg', 'pepamontero'] |
nobody |
1 |
5-4622 5 days ago |
5-65626 5 days ago |
11-1640 11 days |
| 39575 |
YaelDillies author:YaelDillies |
chore(Data/Finsupp): make `mapDomain_congr` congr |
This makes simp stronger. It particular, it breaks some proofs that relied on simp being weak.
From MeanFourier
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
maintainer-merge
|
31/38 |
Mathlib/Algebra/MonoidAlgebra/MapDomain.lean,Mathlib/Algebra/MonoidAlgebra/Module.lean,Mathlib/Algebra/MvPolynomial/Nilpotent.lean,Mathlib/Algebra/Polynomial/Laurent.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Geometry/Convex/ConvexSpace/Defs.lean,Mathlib/LinearAlgebra/Basis/Defs.lean,Mathlib/LinearAlgebra/Finsupp/Pi.lean,Mathlib/LinearAlgebra/Matrix/Basis.lean,Mathlib/NumberTheory/NumberField/EquivReindex.lean,Mathlib/NumberTheory/NumberField/House.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/Functoriality.lean,Mathlib/RepresentationTheory/Intertwining.lean,Mathlib/RingTheory/Bialgebra/MonoidAlgebra.lean |
14 |
15 |
['YaelDillies', 'eric-wieser', 'github-actions', 'joneugster', 'mathlib-merge-conflicts'] |
joneugster assignee:joneugster |
1 |
5-2963 5 days ago |
13-24877 13 days ago |
58-64085 58 days |
| 39161 |
alreadydone author:alreadydone |
feat(LinearAlgebra): commutative semirings satisfy strong rank condition |
Co-authored-by: Aristotle (Harmonic) <aristotle-harmonic@harmonic.fun>
Co-authored-by: Monica Omar <23701951+themathqueen@users.noreply.github.com>
Thanks to ChatGPT and Gemini for converting part of Yi-Jia Tan's paper into LaTeX, which served as solutions provided to Aristotle.
- [x] depends on: #40875
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
merge-conflict
awaiting-author
label:t-algebra$ |
288/3 |
Mathlib.lean,Mathlib/LinearAlgebra/Matrix/Nonsingular.lean,Mathlib/LinearAlgebra/Matrix/SemiringInverse.lean,docs/references.bib |
4 |
56 |
['SnirBroshi', 'alreadydone', 'github-actions', 'mathlib-dependent-issues', 'tb65536', 'themathqueen', 'wwylele'] |
themathqueen assignee:themathqueen |
1 |
4-83481 4 days ago |
6-9129 6 days ago |
21-55858 21 days |
| 39341 |
drocta author:drocta |
feat(Algebra/Colimit/DirectLimit): add DirectLimit.(NonUnital)StarAlgebra.(lift/of) maps and associated lemmas |
add the `of` and `lift` maps for `DirectLimit.StarAlgebra` and `DirectLimit.NonUnitalStarAlgebra`, as well as the associated lemmas, `of_f`, `lift_comp_of`, `lift_of`, and `hom_ext` for each. Also make `DirectLimit.NonUnitalAlgebra` only require `[Monoid R]` rather than `[CommSemiring R]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Use of AI: I again asked ChatGPT for some advice about some things about this code. I can personally vouch for all of the code I'm submitting, and that I understand all of it.
This is the third part of my project towards supporting direct limits of $C^∗$ -algebras (as I described [on Zulip](https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Early.20feedback.20on.20approach.20towards.20formalizing.20UHF.20algebras.3F) ).
This PR adds an import of `Mathlib.Algebra.Star.StarAlgHom` (because it needs `StarAlgHom` and `NonUnitalStarAlgHom`) replacing/encompassing the previously added imports of `Mathlib.Algebra.Star.StarRingHom` and `Mathlib.Algebra.Algebra.NonUnitalHom` (added in PR #38308 and #38672 respectively). |
t-algebra
new-contributor
awaiting-author
label:t-algebra$ |
100/3 |
Mathlib/Algebra/Colimit/DirectLimit.lean |
1 |
22 |
['dagurtomas', 'drocta', 'github-actions', 'themathqueen'] |
themathqueen assignee:themathqueen |
1 |
4-82941 4 days ago |
4-82941 4 days ago |
56-22749 56 days |
| 31141 |
peabrainiac author:peabrainiac |
feat(Analysis/Calculus): parametric integrals over smooth functions are smooth |
Show that for any smooth function `f : H × ℝ → E`, the parametric integral `fun x ↦ ∫ t in a..b, f (x, t) ∂μ` is smooth too.
The argument proceeds inductively, using the fact that derivatives of parametric integrals can themselves be computed as parametric integrals. The necessary lemmas on derivatives of parametric integrals already existed, but took some work to apply due to their generality; we state some convenient special cases.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #31077
[](https://gitpod.io/from-referrer/)
|
t-analysis
awaiting-author
merge-conflict
|
470/12 |
Mathlib/Analysis/Calculus/ParametricIntegral.lean,Mathlib/Analysis/Calculus/ParametricIntervalIntegral.lean,Mathlib/MeasureTheory/Integral/DominatedConvergence.lean,Mathlib/Topology/NhdsWithin.lean,Mathlib/Topology/Separation/Regular.lean |
5 |
37 |
['fpvandoorn', 'github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'peabrainiac', 'sgouezel'] |
j-loreaux assignee:j-loreaux |
1 |
4-81425 4 days ago |
161-12274 161 days ago |
33-85043 33 days |
| 34440 |
grunweg author:grunweg |
feat: linter for name components in uppercase |
Per the naming convention, these are errors (unless they are an abbreviation).
Mathlib has *many* violations at the moment: for this reason, we add this as an environment linter
and automatically add all current exceptions. Once these have been fixed, converting to a syntax linter
is desirable.
Until then, track the number of such exceptions as technical debt.
---
[Zulip discussion](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/naming.20convention.20linter/with/570617527)
Note to self: wait for CI, then do a final nolints update. and try to implement the follow-up soon
#40977 is also rolled into this linter now: TODO update PR description!
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
awaiting-author
awaiting-CI
merge-conflict
|
1082/23 |
Mathlib/Init.lean,Mathlib/Tactic/Linter/Style.lean,MathlibTest/Linter/DoubleUnderscore.lean,MathlibTest/Linter/TextBased.lean,scripts/nolints.json |
5 |
31 |
['Vierkantor', 'github-actions', 'grunweg', 'joneugster', 'mathlib-merge-conflicts'] |
nobody |
1 |
4-81173 4 days ago |
154-21096 154 days ago |
13-82065 13 days |
| 41861 |
stalex444 author:stalex444 |
feat(Algebra/Order/Floor): floor-of-sum dichotomy via fractional parts |
This PR adds four lemmas in Mathlib/Algebra/Order/Floor/Ring.lean, placed in the fractional-part section, complementing the existing one-sided bounds le_floor_add and le_floor_add_floor.
Here are the lemmas:
* floor_add_eq — writes ⌊a + b⌋ exactly as ⌊a⌋ + ⌊b⌋ + ⌊fract a + fract b⌋
* floor_add_eq_add_iff — the floors add exactly ⟺ the fractional parts sum below 1
* floor_add_eq_add_add_one_iff — the +1 case ⟺ the fractional parts sum to at least 1
* floor_add_eq_or — the dichotomy: it's always one or the other
The library has the two inequalities but not the exact case analysis, and this closes that small gap. In addition, these are the lemmas for the mechanical/Beatty-word development proposed here --https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Sturmian.20.28mechanical.29.20words/near/610836902.
Claude helped draft the Lean code; I reviewed the code, built the module locally, and it compiled.
---
I'm flexible on the lemma names should reviewers prefer different forms
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
new-contributor
label:t-algebra$ |
25/0 |
Mathlib/Algebra/Order/Floor/Ring.lean |
1 |
5 |
['BoltonBailey', 'github-actions', 'stalex444'] |
nobody |
1 |
4-73920 4 days ago |
4-73920 4 days ago |
4-82958 4 days |
| 40033 |
JJYYY-JJY author:JJYYY-JJY |
chore: remove flexible linter suppressions |
Replace `simp; infer_instance` with explicit proofs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
tech debt
maintainer-merge
|
6/6 |
Mathlib/Dynamics/TopologicalEntropy/DynamicalEntourage.lean,Mathlib/Topology/UniformSpace/Ultra/Constructions.lean |
2 |
18 |
['JJYYY-JJY', 'chenson2018', 'github-actions', 'grunweg', 'joneugster', 'mathlib-merge-conflicts', 'vihdzp'] |
joneugster assignee:joneugster |
3 |
4-73069 4 days ago |
4-73069 4 days ago |
46-19697 46 days |
| 41870 |
FawadHa1der author:FawadHa1der |
perf(MeasureTheory/Integral/IntervalIntegral/Periodic): explicit proof instead of aesop |
replacing use of Aesop with theorems(enorm_ne_top, neg_pos.mpr h). Should improve the heartbeats. Readability doesn't seem to be affected. |
t-measure-probability
new-contributor
|
4/4 |
Mathlib/MeasureTheory/Integral/IntervalIntegral/Periodic.lean |
1 |
4 |
['FawadHa1der', 'felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
1 |
4-72211 4 days ago |
4-72162 4 days ago |
0-3034 50 minutes |
| 40486 |
adomani author:adomani |
chore(CI): keep the previous Lean declarations diff visible while a new build runs |
Keep the previous Lean declarations diff visible (relabelled *stale*) while a new build runs, instead of resetting the PR-summary comment to *pending* on every push.
Companion: leanprover-community/mathlib-ci#56 · details in the **Reference** / **Explanation** / **How-to** comments below.
|
CI
LLM-generated
maintainer-merge
|
21/6 |
.github/workflows/PR_summary.yml,.github/workflows/decls-diff.yml |
2 |
18 |
['SnirBroshi', 'adomani', 'bryangingechen', 'github-actions', 'joneugster', 'mathlib-bors'] |
bryangingechen and joneugster assignee:bryangingechen assignee:joneugster |
2 |
4-68148 4 days ago |
27-46297 27 days ago |
27-65266 27 days |
| 39110 |
SnirBroshi author:SnirBroshi |
chore(Data/Set): reduce defeq abuse of `Set α = α → Prop` |
These are among the first places that would fail if `Set α` wasn't defeq to `α → Prop`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
35/20 |
Mathlib/Data/Set/Basic.lean,Mathlib/Data/Set/Defs.lean,Mathlib/Data/Set/Insert.lean,Mathlib/Data/Set/Prod.lean,Mathlib/Order/BooleanAlgebra/Set.lean |
5 |
27 |
['SnirBroshi', 'Vierkantor', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts', 'themathqueen', 'urkud', 'vihdzp'] |
TwoFX assignee:TwoFX |
1 |
4-67761 4 days ago |
4-71075 4 days ago |
73-10150 73 days |
| 40370 |
eric-wieser author:eric-wieser |
feat: connect BinaryTree and Ordnode |
These types are basically isomorphic; this PR adds the trivial defs that link them.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
maintainer-merge
|
26/1 |
Mathlib/Data/Ordmap/Ordnode.lean |
1 |
2 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
1 |
4-66466 4 days ago |
43-37895 43 days ago |
43-37787 43 days |
| 41813 |
sqrt-of-2 author:sqrt-of-2 |
feat(LinearAlgebra): totally nonnegative matrices |
Define totally nonnegative matrices and add a basic API.
A matrix is totally nonnegative if all its finite minors have nonnegative determinant.
From RealRooted
Co-authored-by: Yaël Dillies <yael.dillies@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
115/1 |
Mathlib.lean,Mathlib/Data/Set/Finite/Range.lean,Mathlib/LinearAlgebra/Matrix/Determinant/TotallyNonneg.lean,Mathlib/Order/Hom/Set.lean |
4 |
17 |
['Vierkantor', 'YaelDillies', 'github-actions', 'sqrt-of-2', 'vlad902'] |
nobody |
1 |
4-58902 4 days ago |
4-61777 4 days ago |
4-70836 4 days |
| 38612 |
SnirBroshi author:SnirBroshi |
feat(Order/SuccPred/CompleteLinearOrder): `sSup s < x` iff theorems when we know if `x` is a successor pre-limit or not |
Adds the following theorems (along with their duals and indexed versions):
```lean
sSup_lt_iff_of_not_isSuccPrelimit : ¬IsSuccPrelimit x → sSup s < x ↔ ∀ a ∈ s, a < x
le_sSup_iff_of_not_isSuccPrelimit : ¬IsSuccPrelimit x → x ≤ sSup s ↔ ∃ a ∈ s, x ≤ a
Order.IsSuccPrelimit.sSup_lt_iff : IsSuccPrelimit x → sSup s < x ↔ ∃ a < x, ∀ b ∈ s, b < a
Order.IsSuccPrelimit.le_sSup_iff : IsSuccPrelimit x → x ≤ sSup s ↔ ∀ a < x, ∃ b ∈ s, a ≤ b
```
They are similar to these existing theorems, but not the same:
```lean
sSup_lt_iff : sSup s < x ↔ ∃ a < x, ∀ b ∈ s, b ≤ a
le_sSup_iff_forall_lt : x ≤ sSup s ↔ ∀ a < x, ∃ b ∈ s, a < b
```
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
43/0 |
Mathlib/Order/SuccPred/CompleteLinearOrder.lean |
1 |
6 |
['SnirBroshi', 'github-actions', 'vihdzp'] |
Vierkantor assignee:Vierkantor |
1 |
4-50612 4 days ago |
49-73820 49 days ago |
85-23681 85 days |
| 39117 |
joelriou author:joelriou |
feat(CategoryTheory): the right derived functor commutes with the shift |
A few lemmas are obtained about precomposing and postcomposing left/right Kan extensions or right/left derived functors with equivalences of categories. By applying these results to the equivalences given by shifts, we construct a family of isomorphisms which shows that the right derived functor commutes with shifts, and by proving certain compatibilities, we obtain a `Functor.CommShift` instance on the right derived functor of a functor which commutes with shifts.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
large-import
|
426/9 |
Mathlib.lean,Mathlib/CategoryTheory/Functor/Derived/LeftDerived.lean,Mathlib/CategoryTheory/Functor/Derived/RightDerived.lean,Mathlib/CategoryTheory/Functor/Derived/RightDerivedCommShift.lean,Mathlib/CategoryTheory/Functor/KanExtension/AdjunctionPreserves.lean,Mathlib/CategoryTheory/Functor/KanExtension/Basic.lean,Mathlib/CategoryTheory/Shift/CommShift.lean,Mathlib/CategoryTheory/Shift/Localization.lean |
8 |
16 |
['dagurtomas', 'github-actions', 'joelriou', 'mathlib-merge-conflicts', 'robin-carlier'] |
kim-em assignee:kim-em |
1 |
4-50609 4 days ago |
5-24290 5 days ago |
43-69274 43 days |
| 40557 |
xroblot author:xroblot |
feat(RingTheory/Ideal): generalize span_singleton_dvd_span_singleton_iff_dvd and emultiplicity_eq_emultiplicity_span |
Move `Ideal.span_singleton_dvd_span_singleton_iff_dvd` from
`Mathlib.RingTheory.DedekindDomain.Ideal.Lemmas` to
`Mathlib.RingTheory.Ideal.Operations`. The result holds for any `CommSemiring` — the `[IsPrincipalIdealRing R]` hypothesis was not needed.
Generalize `Ideal.emultiplicity_eq_emultiplicity_span` from
`[IsDomain R] [IsPrincipalIdealRing R]` to `[CommRing R]`. The proof simplifies considerably: it follows immediately from `emultiplicity_eq_emultiplicity_iff` and the generalized dvd lemma.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-ring-theory |
29/26 |
Mathlib/RingTheory/DedekindDomain/Ideal/Lemmas.lean,Mathlib/RingTheory/Ideal/Operations.lean |
2 |
3 |
['Multramate', 'github-actions', 'xroblot'] |
nobody |
1 |
4-42863 4 days ago |
39-75860 39 days ago |
39-75324 39 days |
| 41849 |
ZRTMRH author:ZRTMRH |
feat(Combinatorics/Quiver/Path): add `Quiver.Reachable` |
Add `Quiver.Reachable a b`, the existence of a directed path from `a` to `b`, together with its basic preorder API (`@[refl]`/`@[trans]`) and `Path.reachable`/`Hom.reachable`.
Unlike `SimpleGraph.Reachable`, this is only a preorder, not an equivalence, since quiver paths are directed; the symmetric notion is reachability in `Symmetrify V`.
---
This will be used by #38310 (where it was suggested in review).
This PR was written with AI assistance (Claude). The code has been reviewed by the author.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
maintainer-merge
|
40/1 |
Mathlib/Combinatorics/Quiver/Path.lean |
1 |
16 |
['SnirBroshi', 'YaelDillies', 'ZRTMRH', 'github-actions', 'robin-carlier'] |
nobody |
1 |
4-36993 4 days ago |
4-40474 4 days ago |
5-26238 5 days |
| 38141 |
Jun2M author:Jun2M |
feat(Order/Partition): the partition induced by a symmetric transitive relation |
We introduce a constructor for Partition from a symmetric, transitive relation, with `copy` function baked into the definition.
Co-authored-by: Peter Nelson <apn.uni@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
awaiting-author
|
43/4 |
Mathlib/Order/Partition/Basic.lean |
1 |
9 |
['SnirBroshi', 'Vierkantor', 'YaelDillies', 'github-actions'] |
nobody |
1 |
4-21678 4 days ago |
5-15931 5 days ago |
90-77422 90 days |
| 39558 |
b-mehta author:b-mehta |
feat(Data/Finset/Prod): count the number of ordered pairs in a set |
These proofs were written a while ago, so they may be golfable
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
16/0 |
Mathlib/Data/Finset/Prod.lean,Mathlib/Data/Fintype/Prod.lean |
2 |
5 |
['b-mehta', 'github-actions', 'j-loreaux', 'plp127'] |
joneugster assignee:joneugster |
1 |
4-21513 4 days ago |
38-33619 38 days ago |
22-55326 22 days |
| 39332 |
Michaillus author:Michaillus |
chore(Topology/Spectral): Added two small lemmas |
chore(Topology/Spectral): Added two lemmas
`IsCompact.isClosed_constructibleTopology_of_isOpen`
`IsCompact.isClosed_constructibleTopology_of_isClosed`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
awaiting-author
|
27/0 |
Mathlib/Topology/Defs/Basic.lean,Mathlib/Topology/Spectral/ConstructibleTopology.lean |
2 |
12 |
['Michaillus', 'github-actions', 'j-loreaux', 'plp127', 'qawbecrdtey'] |
j-loreaux assignee:j-loreaux |
1 |
3-84217 3 days ago |
14-68839 14 days ago |
54-79797 54 days |
| 39307 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/Copy): introduce `UnlabeledCopy` carrier subtype |
Adds `abbrev UnlabeledCopy A B := {B' : B.Subgraph // Nonempty (A ≃g B'.coe)}` and uses it to replace the previous inline filter-set body of `copyCount G H`. Drops the now unused legacy Finset-image bridge `copyCount_eq_card_image_copyToSubgraph`. Adds `uniqueUnlabeledCopyBot` instance so `copyCount_bot` is a one-liner via `Fintype.card_unique`.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
**Step 1/5 of the `Copy` / `InducedCopy` refactor-feat stack.**
This PR isolates the `UnlabeledCopy` type introduction and the count's type-form redefinition from the larger rename/convention work in the rest of the stack. Note that resolving the current clash in naming (`Copy` and `UnlabeledCopy` vs `labelledCopyCount` and `copyCount`) is part of #38745.
|
t-combinatorics |
28/24 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean |
1 |
26 |
['FordUniver', 'SnirBroshi', 'YaelDillies', 'b-mehta', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'mitchell-horner'] |
nobody |
2 |
3-84042 3 days ago |
4-82738 4 days ago |
59-16098 59 days |
| 41902 |
Ljon4ik4 author:Ljon4ik4 |
feat: sum of derivations lemmas |
This PR adds Lemmas showing that derivations are well-behaved with sums.
In order to prove one of them an additive map version of `coe : Derivation R A M → A →ₗ[R] M` is also added.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
17/0 |
Mathlib/RingTheory/Derivation/Basic.lean |
1 |
8 |
['Ljon4ik4', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
1 |
3-58570 3 days ago |
3-71132 3 days ago |
3-70602 3 days |
| 37562 |
IvanRenison author:IvanRenison |
feat(Combinatorics/SimpleGraph): add several lemmas about when `Walk.bypass` and `Walk.cycleBypass` do nothing |
Co-authored-by: Vlad Tsyrklevich <vlad@tsyrklevi.ch>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37577
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
42/4 |
Mathlib/Combinatorics/SimpleGraph/Metric.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean |
2 |
24 |
['IvanRenison', 'SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'ocfnash', 'vlad902'] |
nobody |
2 |
3-54447 3 days ago |
3-67645 3 days ago |
23-62756 23 days |
| 40782 |
tb65536 author:tb65536 |
feat(Combinatorics/SimpleGraph/Coloring/EdgeLabeling): add predicates for monochromatic subsets |
This PR adds predicates for monochromatic subsets, in preparation for Ramsey theory.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
143/0 |
Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeLabeling.lean |
1 |
26 |
['SnirBroshi', 'YaelDillies', 'b-mehta', 'github-actions', 'tb65536'] |
b-mehta assignee:b-mehta |
1 |
3-50611 3 days ago |
17-63409 17 days ago |
30-21713 30 days |
| 40941 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add stabilizers of vectors in representations |
Add Representation.stabilizer: the subgroup fixing a vector in a representation.
Provide basic lemmas for zero vectors, scalar multiples, sums, intertwining maps, and conjugations, as a first step toward smooth representations. Make representation-theoretic arguments use this specialized API instead of repeatedly unfolding the fixed-vector condition or routing through the more general MulAction stabilizer API. |
t-algebra
new-contributor
label:t-algebra$ |
68/0 |
Mathlib.lean,Mathlib/RepresentationTheory/Stabilizer.lean |
2 |
70 |
['JX-Mo', 'Whysoserioushah', 'github-actions', 'tb65536'] |
nobody |
1 |
3-37161 3 days ago |
4-83079 4 days ago |
26-9188 26 days |
| 41855 |
Nicola9Falciola author:Nicola9Falciola |
feat(LinearAlgebra/Matrix/GeneralLinearGroup/Card): add theorem proving cardinal of matrix |
Add the theorem proving the cardinality formula for `Matrix`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
5/0 |
Mathlib/LinearAlgebra/Matrix/GeneralLinearGroup/Card.lean |
1 |
3 |
['felixpernegger', 'github-actions'] |
nobody |
1 |
2-86212 2 days ago |
5-15612 5 days ago |
5-15076 5 days |
| 38319 |
Zetetic-Dhruv author:Zetetic-Dhruv |
feat(Combinatorics/SetFamily): Assouad's dual VC bound |
Adds the Finset-level form of Assouad's 1983 dual VC bound: if a family
`𝒜 : Finset (Finset α)` has VC dimension at most `d`, then for any
ground set `X : Finset α` the dual family
`{𝒜.filter (· ∋ x) : x ∈ X}` has VC dimension at most `2 ^ (d + 1) - 1`.
New declarations (in `Finset` namespace):
- `dualFamily 𝒜 X`: for each `x ∈ X`, the subfamily `{A ∈ 𝒜 | x ∈ A}`
- `mem_dualFamily` (`@[simp]`): membership characterisation
- `exists_shatters_of_dualFamily_shatters`: Assouad's bitstring-coding lemma
- `vcDim_dualFamily_le`: the headline VC bound
Proof by Assouad's classical bitstring-coding argument. Sits on top of `Finset.shatterer` / `Finset.vcDim` from
`Mathlib.Combinatorics.SetFamily.Shatter`.
References:
- P. Assouad, Densite et dimension, Ann. Inst. Fourier 33(3) (1983), Thm 2.13
- J. Matousek, Lectures on Discrete Geometry, GTM 212, Springer, 2002, Section 10.3 Lemma 10.3.3
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
199/0 |
Mathlib.lean,Mathlib/Combinatorics/SetFamily/DualVC.lean,docs/references.bib |
3 |
43 |
['Shreyas4991', 'YaelDillies', 'Zetetic-Dhruv', 'github-actions'] |
b-mehta assignee:b-mehta |
1 |
2-81376 2 days ago |
73-62330 73 days ago |
90-22443 90 days |
| 41214 |
artie2000 author:artie2000 |
chore(Algebra/Polynomial/Degree): rename lemma |
* Rename `degree_sub_lt` to `degree_sub_lt_left` due to proposed `_right` variation PRed at #37956. Rename suggested at https://github.com/leanprover-community/mathlib4/pull/37956#discussion_r3070265942
This PR is blocking #37956
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
12/9 |
Mathlib/Algebra/Polynomial/Degree/Defs.lean,Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Polynomial/Sequence.lean,Mathlib/FieldTheory/Minpoly/Field.lean,Mathlib/FieldTheory/Minpoly/IsIntegrallyClosed.lean,Mathlib/LinearAlgebra/Lagrange.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/PowerSeries/WeierstrassPreparation.lean |
8 |
1 |
['github-actions', 'themathqueen'] |
nobody |
1 |
2-80278 2 days ago |
20-57440 20 days ago |
20-59141 20 days |
| 41927 |
felixpernegger author:felixpernegger |
chore: replace `simp only []` with `simp only` |
Slightly simplify. There are no `simp []`, `rw []` or `grind []` used; so these are probably the only empty lists one can replace.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
easy |
13/13 |
Counterexamples/AharoniKorman.lean,Mathlib/Analysis/SpecialFunctions/Integrals/PosLogEqCircleAverage.lean,Mathlib/CategoryTheory/Limits/Fubini.lean,Mathlib/Computability/PartrecCode.lean,Mathlib/Computability/RE.lean,Mathlib/Computability/TuringMachine/Config.lean,Mathlib/ModelTheory/Encoding.lean |
7 |
3 |
['SnirBroshi', 'felixpernegger', 'github-actions', 'plp127'] |
nobody |
1 |
2-75315 2 days ago |
2-83695 2 days ago |
2-83326 2 days |
| 41930 |
plp127 author:plp127 |
fix(GroupTheory/Coprod): fix recursor argument name |
Fix the argument names of `Monoid.Coprod.induction_on'` and `Monoid.Coprod.induction_on`. Name the motive `motive` and name the minor premises according to their contents.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
easy
t-group-theory
|
7/6 |
Mathlib/GroupTheory/Coprod/Basic.lean |
1 |
2 |
['felixpernegger', 'github-actions', 'plp127'] |
nobody |
1 |
2-73748 2 days ago |
2-81287 2 days ago |
2-80751 2 days |
| 41610 |
SnirBroshi author:SnirBroshi |
chore(Logic/Relation): golf using `grind` |
---
- `comp_assoc`: 14ms to 23ms
- `IsTrans.map`: 10ms to 28ms
- `instIsPreorderOfIsTrans`: ? to 11ms
- `total_of_right_unique`: ? to 15ms
- `isTrans_join`: 10ms to 100ms
- `Quot.eqvGen_sound`: ? to ?
- `Equivalence.eqvGen_iff`: ? to 14ms
(the question marks mean that `trace.profiler` doesn't output anything, maybe they're below 1ms?)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
8/36 |
Mathlib/Logic/Relation.lean |
1 |
11 |
['SnirBroshi', 'b-mehta', 'chenson2018', 'github-actions', 'grunweg', 'leanprover-radar', 'themathqueen'] |
nobody |
1 |
2-42858 2 days ago |
4-53232 4 days ago |
4-76102 4 days |
| 41338 |
kim-em author:kim-em |
refactor(Combinatorics/SimpleGraph/CycleGraph): golf cycleGraph_isContained_iff via getVert |
Reopened from my fork, replacing #41268 (previously a branch on the main repo).
This PR rewrites the reverse direction of `cycleGraph_isContained_iff` from https://github.com/leanprover-community/mathlib4/pull/35255. Building the copy on `Walk.getVert` instead of `support` indexing makes the vertex map total, dispatches both adjacency cases through a single cyclic-successor helper (no `wlog`), handles the wraparound with `adj_penultimate`, and gets injectivity directly from `IsCycle.getVert_injOn'`.
🤖 Prepared with Claude Code |
t-combinatorics
LLM-generated
awaiting-author
|
14/20 |
Mathlib/Combinatorics/SimpleGraph/CycleGraph.lean |
1 |
11 |
['SnirBroshi', 'github-actions', 'kim-em', 'vlad902'] |
nobody |
2 |
2-40907 2 days ago |
2-40907 2 days ago |
15-75556 15 days |
| 39692 |
YaelDillies author:YaelDillies |
chore(Algebra/Order/BigOperators): follow the `₀` naming convention |
We have long agreed that `MonoidWithZero` lemmas corresponding to `Monoid` lemmas should be suffixed with `₀`, while currently it is the `Monoid` lemmas that are primed.
Also deprecate two primed lemmas that only differed from the unprimed versions in a minor way.
## Renames
Moves:
* `finprod_le_finprod'` → `finprod_le_finprod`
* `finprod_le_finprod` → `finprod_le_finprod₀`
* `Finset.prod_le_prod'` → `Finset.prod_le_prod`
* `Finset.one_le_prod'` → `Finset.one_le_prod`
* `Finset.one_le_prod''` → `Finset.one_le_prod`
* `Finset.sum_nonneg'` → `Finset.sum_nonneg`
* `Finset.prod_le_one'` → `Finset.prod_le_one`
* `Finset.prod_le_prod_of_subset_of_one_le'` → `Finset.prod_le_prod_of_subset_of_one_le`
* `Finset.prod_le_prod_of_subset_of_le_one'` → `Finset.prod_le_prod_of_subset_of_le_one`
* `Finset.prod_mono_set_of_one_le'` → `Finset.prod_mono_set_of_one_le`
* `Finset.prod_anti_set_of_le_one'` → `Finset.prod_anti_set_of_le_one`
* `Finset.prod_le_univ_prod_of_one_le'` → `Finset.prod_le_univ_prod_of_one_le`
* `Finset.prod_eq_one_iff_of_one_le'` → `Finset.prod_eq_one_iff_of_one_le`
* `Finset.prod_eq_one_iff_of_le_one'` → `Finset.prod_eq_one_iff_of_le_one`
* `Finset.single_le_prod'` → `Finset.single_le_prod`
* `Finset.prod_fiberwise_le_prod_of_one_le_prod_fiber'` → `Finset.prod_fiberwise_le_prod_of_one_le_prod_fiber`
* `Finset.prod_le_prod_fiberwise_of_prod_fiber_le_one'` → `Finset.prod_le_prod_fiberwise_of_prod_fiber_le_one`
* `Finset.abs_sum_of_nonneg'` → `Finset.abs_sum_of_nonneg`
* `Finset.prod_le_prod_of_subset'` → `Finset.prod_le_prod_of_subset`
* `Finset.prod_mono_set'` → `Finset.prod_mono_set`
* `Finset.prod_le_prod_of_ne_one'` → `Finset.prod_le_prod_of_ne_one`
* `Finset.prod_lt_prod'` → `Finset.prod_lt_prod`
* `Finset.prod_lt_prod_of_nonempty'` → `Finset.prod_lt_prod_of_nonempty`
* `Finset.prod_lt_prod_of_subset'` → `Finset.prod_lt_prod_of_subset`
* `Finset.single_lt_prod'` → `Finset.single_lt_prod`
* `Finset.exists_lt_of_prod_lt'` → `Finset.exists_lt_of_prod_lt`
* `Finset.exists_le_of_prod_le'` → `Finset.exists_le_of_prod_le`
* `Finset.exists_one_lt_of_prod_one_of_exists_ne_one'` → `Finset.exists_one_lt_of_prod_one_of_exists_ne_one`
* `Fintype.prod_mono'` → `Fintype.prod_mono`
* `Fintype.prod_strictMono'` → `Fintype.prod_strictMono`
* `List.Forall₂.prod_le_prod'` → `List.Forall₂.prod_le_prod`
* `List.Sublist.prod_le_prod'` → `List.Sublist.prod_le_prod`
* `List.SublistForall₂.prod_le_prod'` → `List.SublistForall₂.prod_le_prod`
* `List.prod_le_prod'` → `List.prod_le_prod`
* `List.prod_lt_prod'` → `List.prod_lt_prod`
* `List.exists_lt_of_prod_lt'` → `List.exists_lt_of_prod_lt`
* `List.exists_le_of_prod_le'` → `List.exists_le_of_prod_le`
* `Multiset.prod_lt_prod'` → `Multiset.prod_lt_prod`
* `Multiset.prod_lt_prod_of_nonempty'` → `Multiset.prod_lt_prod_of_nonempty`
* `Finset.prod_le_prod` → `Finset.prod_le_prod₀`
* `Finset.prod_le_one` → `Finset.prod_le_one₀`
* `Finset.one_le_prod` → `Finset.one_le_prod₀`
* `Finset.prod_le_prod_of_subset_of_one_le` → `Finset.prod_le_prod_of_subset_of_one_le₀`
* `Finset.prod_le_prod_of_subset_of_le_one` → `Finset.prod_le_prod_of_subset_of_le_one₀`
* `Finset.prod_mono_set_of_one_le` → `Finset.prod_mono_set_of_one_le₀`
* `Finset.prod_anti_set_of_le_one` → `Finset.prod_anti_set_of_le_one₀`
* `Finset.prod_lt_prod` → `Finset.prod_lt_prod₀`
* `Finset.prod_lt_prod_of_nonempty` → `Finset.prod_lt_prod_of_nonempty₀`
## Deprecations
* `Finset.sum_nonneg'`, `Finset.one_le_prod''`
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/345428-mathlib-reviewers/topic/The.20.E2.82.80.20suffix/with/604912624)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-order
awaiting-author
label:t-algebra$ |
288/221 |
Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/Group/Submonoid/Pointwise.lean,Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/Algebra/Order/BigOperators/Group/List.lean,Mathlib/Algebra/Order/BigOperators/Group/Multiset.lean,Mathlib/Algebra/Order/BigOperators/GroupWithZero/Finset.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Asymptotics/SpecificAsymptotics.lean,Mathlib/Analysis/BoxIntegral/DivergenceTheorem.lean,Mathlib/Analysis/Complex/Exponential.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/InnerProductSpace/Orientation.lean,Mathlib/Analysis/InnerProductSpace/Subspace.lean,Mathlib/Analysis/Normed/Ring/Basic.lean,Mathlib/Analysis/Normed/Ring/InfiniteProd.lean,Mathlib/Analysis/ODE/DiscreteGronwall.lean,Mathlib/Analysis/Polynomial/MahlerMeasure.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/Extremal.lean,Mathlib/Analysis/SpecificLimits/Basic.lean,Mathlib/MeasureTheory/Constructions/Pi.lean,Mathlib/MeasureTheory/Measure/HasOuterApproxClosedProd.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Measure/Lebesgue/VolumeOfBalls.lean,Mathlib/NumberTheory/Bertrand.lean,Mathlib/NumberTheory/Height/Basic.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/NumberTheory/NumberField/InfinitePlace/Basic.lean,Mathlib/NumberTheory/Primorial.lean,Mathlib/NumberTheory/SelbergSieve.lean,Mathlib/NumberTheory/SiegelsLemma.lean,Mathlib/NumberTheory/SmoothNumbers.lean,Mathlib/Probability/ProductMeasure.lean,Mathlib/RingTheory/Polynomial/Cyclotomic/Eval.lean,Mathlib/Topology/Algebra/InfiniteSum/ENNReal.lean,Mathlib/Topology/Algebra/InfiniteSum/Order.lean |
35 |
14 |
['Vierkantor', 'YaelDillies', 'b-mehta', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'vihdzp'] |
Vierkantor assignee:Vierkantor |
1 |
2-11299 2 days ago |
2-11299 2 days ago |
14-59775 14 days |
| 39738 |
NoahW314 author:NoahW314 |
feat(Algebra/Algebra/Bilinear): generalize to `NonUnitalNonAssocCommSemiring` |
Complete a TODO which can now be done since #28604 is merged.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
maintainer-merge
label:t-algebra$ |
2/4 |
Mathlib/Algebra/Algebra/Bilinear.lean |
1 |
2 |
['github-actions', 'madvorak', 'themathqueen'] |
nobody |
1 |
1-85252 1 day ago |
60-40947 60 days ago |
60-40411 60 days |
| 39506 |
b-mehta author:b-mehta |
feat(Data/Complex/Basic): add simproc to reduce powers of I |
This is enabled by default to make eg i^5 simplify automatically.
We intentionally require the exponent to be a numeral, as this is intended to be a reduction statement, and for symbolic `n`, the lemma `I_pow_eq_pow_mod` should be used instead.
Note that we can't have `I_pow_eq_pow_mod` as a simp lemma due to looping.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
t-meta
maintainer-merge
|
71/5 |
Mathlib/Algebra/Group/Defs.lean,Mathlib/Analysis/Meromorphic/FactorizedRational.lean,Mathlib/Analysis/SpecialFunctions/Elliptic/Weierstrass.lean,Mathlib/Data/Complex/Basic.lean,MathlibTest/Simproc/IPow.lean |
5 |
20 |
['Paul-Lez', 'SnirBroshi', 'b-mehta', 'eric-wieser', 'github-actions', 'joneugster', 'mathlib-merge-conflicts'] |
joneugster assignee:joneugster |
1 |
1-73444 1 day ago |
2-32331 2 days ago |
63-59775 63 days |
| 40468 |
BoltonBailey author:BoltonBailey |
feat(Data/Nat/Choose/Multinomial): add positivity support |
This PR adds `positivity` tactic support for `Multiset.multinomial`, by adding a `_pos` theorem and an extension.
This was done as a part of Project Numina's LeanTriathlon project. AI was used as an assistant in the creation of this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
maintainer-merge
|
24/0 |
Mathlib/Data/Nat/Choose/Multinomial.lean |
1 |
6 |
['BoltonBailey', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
1 |
1-71431 1 day ago |
1-72078 1 day ago |
37-80428 37 days |
| 41487 |
Deicyde author:Deicyde |
feat: implement pi-base cross-reference attribute |
Adds a `@[pibase ID]` cross-reference attribute for canonical pi-base identifiers.
The parser accepts IDs of the form `P000001`, `S000023`, and `T000001`, and routes them to the corresponding `properties/`, `spaces/`, or `theorems/` page on `topology.pi-base.org`.
Tests cover docstring insertion, `#pibase_tags`, all three URL routes, and malformed IDs.
This PR was prepared with assistance from Codex. Based heavily on #41290 |
t-meta
LLM-generated
|
149/8 |
Mathlib/Tactic/CrossRefAttribute.lean,MathlibTest/CrossRefAttribute.lean |
2 |
6 |
['Deicyde', 'github-actions', 'joneugster', 'mathlib-merge-conflicts', 'vlad902'] |
thorimur assignee:thorimur |
1 |
0-50609 14 hours ago |
3-63093 3 days ago |
7-48846 7 days |
| 39703 |
YaelDillies author:YaelDillies |
chore: create a `Basic` top folder |
Move a select few folders from `Logic` to a new `Basic` folder.
The goal is to finally move the material misplaced in the `Data` and `Logic` folder and to clarify the various expectations of each folder. Ultimately:
* the `Basic` folder will be about basic predicates on types and basic mathematical types not fitting in any other folder;
* the `Data` folder will be about data structures, instead of the current mix of data structures and basic mathematical types not fitting in any other folder;
* the `Logic` folder will be about advanced logic results not fitting in either `ModelTheory` or `SetTheory`, instead of the current mix of basic predicates on types and advanced logic results.
Many more files (~1000) could be moved, so I will do it in several PRs. Not all files should move to `Basic`. Some files should go to `Algebra.Order` instead (eg `Data.Nat.Lattice`) and some should be straight out deprecated (eg `Data.Analysis`).
[Zulip discussion](https://leanprover.zulipchat.com/#narrow/channel/345428-mathlib-reviewers/topic/Basic.20folder/with/597151406)
---
This PR stems from discussions at the MI retreat 2026.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
file-removed
t-data
|
165/96 |
Counterexamples/Girard.lean,Mathlib.lean,Mathlib/Algebra/CharZero/Defs.lean,Mathlib/Algebra/Group/Irreducible/Defs.lean,Mathlib/Algebra/Group/Nat/Units.lean,Mathlib/Algebra/Group/Pi/Basic.lean,Mathlib/Algebra/Group/Units/Basic.lean,Mathlib/Algebra/Group/WithOne/Defs.lean,Mathlib/Algebra/GroupWithZero/Basic.lean,Mathlib/Algebra/GroupWithZero/Defs.lean,Mathlib/Algebra/Module/Presentation/Free.lean,Mathlib/Algebra/Module/Projective.lean,Mathlib/Algebra/NeZero.lean,Mathlib/Basic/Denumerable.lean,Mathlib/Basic/ExistsUnique.lean,Mathlib/Basic/IsEmpty.lean,Mathlib/Basic/IsEmpty/Basic.lean,Mathlib/Basic/IsEmpty/Defs.lean,Mathlib/Basic/Logic/Basic.lean,Mathlib/Basic/Logic/Lemmas.lean,Mathlib/Basic/Nonempty.lean,Mathlib/Basic/Nontrivial/Basic.lean,Mathlib/Basic/Nontrivial/Defs.lean,Mathlib/Basic/README.md,Mathlib/Basic/Unique.lean,Mathlib/Basic/UnivLE.lean,Mathlib/CategoryTheory/EssentiallySmall.lean,Mathlib/CategoryTheory/Limits/Types/Colimits.lean,Mathlib/CategoryTheory/Limits/Types/Limits.lean,Mathlib/CategoryTheory/UnivLE.lean,Mathlib/Combinatorics/Quiver/Path.lean,Mathlib/Computability/Primrec/Basic.lean,Mathlib/Data/Bool/Basic.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/GetD.lean,Mathlib/Data/Nat/Basic.lean,Mathlib/Data/Nat/MaxPowDiv.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Quot.lean,Mathlib/Data/README.md,Mathlib/Data/Rat/Denumerable.lean,Mathlib/Data/TwoPointing.lean,Mathlib/Lean/Meta/CongrTheorems.lean,Mathlib/LinearAlgebra/Matrix/Defs.lean,Mathlib/Logic/Equiv/Defs.lean,Mathlib/Logic/Equiv/List.lean,Mathlib/Logic/Function/Basic.lean,Mathlib/Logic/README.md,Mathlib/Order/OrderIsoNat.lean,Mathlib/Order/RelClasses.lean,Mathlib/Order/WithBot.lean,Mathlib/RingTheory/Coprime/Basic.lean,Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Cardinal/UnivLE.lean,Mathlib/SetTheory/ZFC/Rank.lean,Mathlib/Tactic/CancelDenoms/Core.lean,Mathlib/Tactic/CongrExclamation.lean,Mathlib/Tactic/ITauto.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean,Mathlib/Tactic/Nontriviality/Core.lean,Mathlib/Tactic/Push.lean,Mathlib/Tactic/Subsingleton.lean,Mathlib/Tactic/Tauto.lean,Mathlib/Testing/Plausible/Testable.lean,Mathlib/Topology/Order/UpperLowerSetTopology.lean,MathlibTest/Linter/PrivateModule/ImportOnly.lean,scripts/autolabel.lean,scripts/noshake.json |
69 |
39 |
['SnirBroshi', 'TwoFX', 'YaelDillies', 'github-actions', 'grunweg', 'j-loreaux', 'joneugster', 'mathlib-merge-conflicts', 'themathqueen'] |
nobody |
1 |
0-24088 6 hours ago |
0-27456 7 hours ago |
50-63346 50 days |
| 41682 |
tb65536 author:tb65536 |
feat(LinearAlgebra/LinearIndependent/Basic): linear independence along faithful algebra maps |
This PR adds results about linear independence along faithful algebra maps.
I think the 3.5% import bump is fine for this basic file (and it maintains the existing `assert_not_exists Cardinal`), but happy to split off to a `LinearIndependent/Algebra` file if desired.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
maintainer-merge
delegated
label:t-algebra$ |
23/0 |
Mathlib/LinearAlgebra/LinearIndependent/Basic.lean |
1 |
11 |
['Vierkantor', 'github-actions', 'mathlib-bors', 'tb65536', 'themathqueen'] |
nobody |
1 |
0-1421 23 minutes ago |
0-1422 14 minutes ago |
8-83060 8 days |
| 41189 |
ADedecker author:ADedecker |
feat: define Fredholm operators between TVSs |
Project started during the May 2026 workshop "Techniques and Tools for the Formalization of Analysis" at ICERM.
Co-authored-by: Jon Bannon <jbannon@siena.edu>
Co-authored-by: Yongxi (Aaron) Lin <aaronlin@andrew.cmu.edu>
Co-authored-by: Patrick Massot <patrickmassot@free.fr>
Co-authored-by: Oliver Nash <github@olivernash.org>
Co-authored-by: Filippo A. E. Nuccio <filippo.nuccio@univ-st-etienne.fr>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [x] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39100
- [x] depends on: #41038
- [x] depends on: #41229
- [x] depends on: #41250
[](https://gitpod.io/from-referrer/)
|
t-analysis |
382/0 |
Mathlib.lean,Mathlib/Algebra/Module/LinearMap/FiniteRange.lean,Mathlib/Analysis/Normed/Operator/Fredholm/Basic.lean |
3 |
51 |
['ADedecker', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'themathqueen'] |
themathqueen assignee:themathqueen |
1 |
0-1394 23 minutes ago |
0-2044 25 minutes ago |
5-57723 5 days |
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Updated |
Last status change |
total time in review |
| 14720 |
eric-wieser author:eric-wieser |
refactor: change `CliffordAlgebra.lift` to use quadratic maps |
This works towards addressing a footnote on [page 152](https://eric-wieser.github.io/thesis/eric-wieser-thesis.pdf#page=164) of my thesis.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-algebra
label:t-algebra$ |
200/167 |
Mathlib/LinearAlgebra/CliffordAlgebra/Basic.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Equivs.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Prod.lean,Mathlib/LinearAlgebra/QuadraticForm/Complex.lean,Mathlib/LinearAlgebra/QuadraticForm/Dual.lean,Mathlib/LinearAlgebra/QuadraticForm/Isometry.lean,Mathlib/LinearAlgebra/QuadraticForm/IsometryEquiv.lean,Mathlib/LinearAlgebra/QuadraticForm/Prod.lean,Mathlib/LinearAlgebra/QuadraticForm/QuadraticModuleCat.lean,Mathlib/LinearAlgebra/QuadraticForm/Real.lean,Mathlib/LinearAlgebra/QuadraticForm/TensorProduct/Isometries.lean |
11 |
1 |
['github-actions'] |
nobody |
721-23681 1 year ago |
unknown |
0-0 0 seconds |
| 14889 |
yuma-mizuno author:yuma-mizuno |
feat(CategoryTheory/Bicategory/Monad): define monad in bicategory |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #12107
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
blocked-by-other-PR
t-category-theory
|
1566/12 |
Mathlib.lean,Mathlib/CategoryTheory/Bicategory/Functor/Oplax.lean,Mathlib/CategoryTheory/Bicategory/LocallyDiscrete.lean,Mathlib/CategoryTheory/Bicategory/Monad/Adjunction.lean,Mathlib/CategoryTheory/Bicategory/Monad/Basic.lean,Mathlib/CategoryTheory/Bicategory/Monad/Cat.lean,Mathlib/CategoryTheory/Monad/Basic.lean,Mathlib/Tactic.lean,Mathlib/Tactic/CategoryTheory/Coherence.lean,Mathlib/Tactic/Widget/StringDiagram.lean,scripts/noshake.json,test/StringDiagram.lean,widget/src/penrose/monoidal.dsl,widget/src/penrose/monoidal.sty |
14 |
2 |
['github-actions'] |
nobody |
721-23681 1 year ago |
unknown |
0-0 0 seconds |
| 14036 |
adomani author:adomani |
Test/decl diff in lean |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
465/1040 |
.github/workflows/Lean_decl_diff.yml,.github/workflows/bors.yml,.github/workflows/build.yml,.github/workflows/build.yml.in,.github/workflows/build_fork.yml,.github/workflows/mk_build_yml.sh,scripts/decls_diff_hybrid.sh,scripts/list_decls.lean |
8 |
1 |
['github-actions'] |
nobody |
721-23680 1 year ago |
unknown |
0-0 0 seconds |
| 12952 |
adomani author:adomani |
test: length statistics |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
test-ci
|
124/0 |
.github/workflows/mathlib_stats.yml,.github/workflows/ml_stats_label.yaml,scripts/mathlib_stats.sh |
3 |
9 |
['github-actions'] |
nobody |
721-23679 1 year ago |
unknown |
0-0 0 seconds |
| 13297 |
urkud author:urkud |
feat(Semicontinuous): add `comp` lemma |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
merge-conflict
awaiting-author
t-topology
t-order
|
31/13 |
Mathlib/Topology/Semicontinuous.lean |
1 |
3 |
['sgouezel', 'urkud'] |
nobody |
721-23679 1 year ago |
785-24377 785 days ago |
0-18201 5 hours |
| 13372 |
adomani author:adomani |
dev: generic replacement |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
446/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Linter/ReplaceRefine.lean,Mathlib/Tactic/Replacements.lean |
4 |
4 |
['adomani', 'github-actions'] |
nobody |
721-23679 1 year ago |
unknown |
0-0 0 seconds |
| 13512 |
adomani author:adomani |
test: count all |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
85/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Linter.lean,Mathlib/Tactic/Linter/Tally.lean |
4 |
0 |
[] |
nobody |
721-23679 1 year ago |
unknown |
0-0 0 seconds |
| 12416 |
adomani author:adomani |
chore: remove some cdots |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
3830/3239 |
Archive/Imo/Imo1972Q5.lean,Archive/Imo/Imo2006Q5.lean,Archive/Imo/Imo2008Q2.lean,Archive/Imo/Imo2021Q1.lean,Archive/Wiedijk100Theorems/AbelRuffini.lean,Archive/Wiedijk100Theorems/BallotProblem.lean,Archive/Wiedijk100Theorems/BirthdayProblem.lean,Archive/Wiedijk100Theorems/BuffonsNeedle.lean,Archive/Wiedijk100Theorems/CubingACube.lean,Archive/Wiedijk100Theorems/FriendshipGraphs.lean,Archive/Wiedijk100Theorems/Partition.lean,Counterexamples/Cyclotomic105.lean,Counterexamples/DirectSumIsInternal.lean,Mathlib.lean,Mathlib/Algebra/Algebra/Spectrum.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/BigOperators/List/Basic.lean,Mathlib/Algebra/Category/GroupCat/Colimits.lean,Mathlib/Algebra/Category/ModuleCat/Images.lean,Mathlib/Algebra/Category/Ring/Constructions.lean,Mathlib/Algebra/CharP/Quotient.lean,Mathlib/Algebra/ContinuedFractions/Computation/Approximations.lean,Mathlib/Algebra/DirectLimit.lean,Mathlib/Algebra/DirectSum/Internal.lean,Mathlib/Algebra/GCDMonoid/Finset.lean,Mathlib/Algebra/GeomSum.lean,Mathlib/Algebra/Group/UniqueProds.lean,Mathlib/Algebra/GroupPower/Order.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/Algebra/Homology/Exact.lean,Mathlib/Algebra/Homology/HomotopyCategory/HomComplex.lean,Mathlib/Algebra/Homology/HomotopyCategory/Triangulated.lean,Mathlib/Algebra/Homology/LocalCohomology.lean,Mathlib/Algebra/Homology/TotalComplex.lean,Mathlib/Algebra/Lie/DirectSum.lean,Mathlib/Algebra/Lie/IdealOperations.lean,Mathlib/Algebra/Lie/Nilpotent.lean,Mathlib/Algebra/Lie/Weights/Basic.lean,Mathlib/Algebra/Module/DedekindDomain.lean,Mathlib/Algebra/Module/LinearMap/End.lean,Mathlib/Algebra/Module/LocalizedModule.lean,Mathlib/Algebra/Module/PID.lean,Mathlib/Algebra/Module/Submodule/Bilinear.lean,Mathlib/Algebra/Module/Torsion.lean,Mathlib/Algebra/Module/Zlattice/Basic.lean,Mathlib/Algebra/MonoidAlgebra/Basic.lean,Mathlib/Algebra/MonoidAlgebra/Degree.lean,Mathlib/Algebra/MonoidAlgebra/Ideal.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Algebra/Order/Archimedean.lean,Mathlib/Algebra/Order/BigOperators/Group/List.lean,Mathlib/Algebra/Order/CauSeq/BigOperators.lean,Mathlib/Algebra/Order/CompleteField.lean,Mathlib/Algebra/Order/Field/Basic.lean,Mathlib/Algebra/Order/Group/Abs.lean,Mathlib/Algebra/Order/Group/Int.lean,Mathlib/Algebra/Order/Group/MinMax.lean,Mathlib/Algebra/Order/Interval/Basic.lean,Mathlib/Algebra/Order/Pointwise.lean,Mathlib/Algebra/Order/Sub/Defs.lean,Mathlib/Algebra/Polynomial/BigOperators.lean,Mathlib/Algebra/Polynomial/Degree/Definitions.lean,Mathlib/Algebra/Polynomial/Derivative.lean,Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/Algebra/Polynomial/Module/Basic.lean,Mathlib/Algebra/Polynomial/PartialFractions.lean,Mathlib/Algebra/Polynomial/Reverse.lean,Mathlib/Algebra/Polynomial/RingDivision.lean,Mathlib/Algebra/Polynomial/UnitTrinomial.lean,Mathlib/Algebra/Quandle.lean,Mathlib/Algebra/Quaternion.lean,Mathlib/AlgebraicGeometry/AffineScheme.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Affine.lean,Mathlib/AlgebraicGeometry/FunctionField.lean,Mathlib/AlgebraicGeometry/Gluing.lean,Mathlib/AlgebraicGeometry/Morphisms/Basic.lean,Mathlib/AlgebraicGeometry/Morphisms/QuasiCompact.lean,Mathlib/AlgebraicGeometry/Morphisms/QuasiSeparated.lean,Mathlib/AlgebraicGeometry/Morphisms/RingHomProperties.lean,Mathlib/AlgebraicGeometry/OpenImmersion.lean,Mathlib/AlgebraicGeometry/ProjectiveSpectrum/Scheme.lean,Mathlib/AlgebraicGeometry/Properties.lean,Mathlib/AlgebraicGeometry/Pullbacks.lean,Mathlib/AlgebraicGeometry/StructureSheaf.lean,Mathlib/AlgebraicTopology/SimplexCategory.lean,Mathlib/AlgebraicTopology/SplitSimplicialObject.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Analytic/IsolatedZeros.lean,Mathlib/Analysis/BoundedVariation.lean,Mathlib/Analysis/BoxIntegral/Box/Basic.lean,Mathlib/Analysis/BoxIntegral/Partition/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Basic.lean,Mathlib/Analysis/Calculus/Deriv/Slope.lean,Mathlib/Analysis/Calculus/FDeriv/Basic.lean,Mathlib/Analysis/Calculus/FDeriv/Extend.lean,Mathlib/Analysis/Calculus/InverseFunctionTheorem/ApproximatesLinearOn.lean,Mathlib/Analysis/Calculus/LocalExtr/Basic.lean,Mathlib/Analysis/Calculus/ParametricIntegral.lean,Mathlib/Analysis/Calculus/TangentCone.lean |
608 |
0 |
[] |
nobody |
721-23678 1 year ago |
unknown |
0-0 0 seconds |
| 12465 |
rosborn author:rosborn |
style: Change Subtype.val to (↑) |
---
This is a test to see replacing `Subtype.val` with `(↑)` where appropriate.
After performing the rewrite, some of the types subtly changed in a difficult to detect manner.
Before the change, `openEmbedding' _` had type `OpenEmbedding Subtype.val` where `Subtype.val` expanded as `@Subtype.val α fun x ↦ x ∈ U : ↥U → α`. After the change, `Subtype.val` expands to `@Subtype.val α fun x ↦ x ∈ ↑U : { x // x ∈ ↑U } → α`. This caused some later proofs to fail due to the different definition.
In a similar case, within the proof of `mfderiv_coe_sphere_injective` on line 553 `Subtype.val` expanded as `@Subtype.val E fun x ↦ x ∈ (Submodule.span ℝ {↑(-v)})ᗮ : ↥(Submodule.span ℝ {↑(-v)})ᗮ → E`.
After changing to `(↑)`, it expanded to `@Subtype.val E fun x ↦ x ∈ ↑(Submodule.span ℝ {↑(-v)})ᗮ : { x // x ∈ ↑(Submodule.span ℝ {↑(-v)})ᗮ } → E`. One benefit to using `(↑)` was that it lead to a shorter proof as `ContinuousLinearEquiv.coe_coe` could be removed on line 559.
In general, this subtle change in types is basically impossible to detect without a tool like leaff.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
50/50 |
Mathlib/Analysis/InnerProductSpace/Basic.lean,Mathlib/Analysis/Normed/Group/Hom.lean,Mathlib/CategoryTheory/Generator.lean,Mathlib/CategoryTheory/Limits/Shapes/Types.lean,Mathlib/CategoryTheory/Subobject/Types.lean,Mathlib/Data/Fin/Basic.lean,Mathlib/Data/Set/Function.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/Setoid/Basic.lean,Mathlib/Geometry/Manifold/ContMDiff/Basic.lean,Mathlib/Geometry/Manifold/Instances/Sphere.lean,Mathlib/Geometry/Manifold/LocalInvariantProperties.lean,Mathlib/GroupTheory/Subsemigroup/Operations.lean,Mathlib/LinearAlgebra/LinearIndependent.lean,Mathlib/Order/Directed.lean,Mathlib/Order/RelIso/Basic.lean,Mathlib/Order/RelIso/Set.lean,Mathlib/RingTheory/Artinian.lean,Mathlib/SetTheory/Cardinal/Cofinality.lean,Mathlib/SetTheory/Game/Basic.lean,Mathlib/SetTheory/Game/PGame.lean,Mathlib/SetTheory/Surreal/Basic.lean,Mathlib/Topology/Bornology/Constructions.lean,Mathlib/Topology/EMetricSpace/Lipschitz.lean,Mathlib/Topology/Germ.lean,Mathlib/Topology/UniformSpace/Basic.lean,Mathlib/Topology/UniformSpace/UniformConvergenceTopology.lean,Mathlib/Topology/UniformSpace/UniformEmbedding.lean |
28 |
1 |
['eric-wieser', 'rosborn'] |
nobody |
721-23678 1 year ago |
unknown |
0-0 0 seconds |
| 12473 |
adomani author:adomani |
first translations |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
424/265 |
Mathlib.lean,Mathlib/Order/Lattice.lean,Mathlib/Order/WithBot.lean,Mathlib/Tactic.lean,Mathlib/Tactic/MinMax.lean |
5 |
0 |
[] |
nobody |
721-23678 1 year ago |
unknown |
0-0 0 seconds |
| 12528 |
adomani author:adomani |
test: autotranslations Bot --> Top |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
350/294 |
Mathlib.lean,Mathlib/Order/WithBot.lean,Mathlib/Tactic.lean,Mathlib/Tactic/MinMax.lean,test/MinMax.lean |
5 |
0 |
[] |
nobody |
721-23678 1 year ago |
813-59116 813 days ago |
0-4 4 seconds |
| 12588 |
adomani author:adomani |
remove trailingDegree |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
1280/979 |
Mathlib.lean,Mathlib/Algebra/MonoidAlgebra/Basic.lean,Mathlib/Algebra/Polynomial/Degree/Definitions.lean,Mathlib/Algebra/Polynomial/Degree/TrailingDegree.lean,Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Polynomial/Mirror.lean,Mathlib/Order/WithBot.lean,Mathlib/Tactic.lean,Mathlib/Tactic/MinMax.lean,Mathlib/Tactic/MinMaxTwo.lean,test/MinMax.lean |
11 |
0 |
[] |
nobody |
721-23678 1 year ago |
unknown |
0-0 0 seconds |
| 12608 |
eric-wieser author:eric-wieser |
feat: allow `nsmul` / `zsmul` to be omitted again, with a warning |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
t-meta
label:t-algebra$ |
118/2 |
Mathlib.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Tactic.lean,Mathlib/Tactic/DefaultFieldLinter.lean,scripts/noshake.json,test/default_field_linter.lean |
6 |
12 |
['YaelDillies', 'eric-wieser', 'fpvandoorn', 'github-actions'] |
nobody |
721-23678 1 year ago |
794-70065 794 days ago |
5-72493 5 days |
| 12637 |
adomani author:adomani |
translation: MonoidAlgebra to AddMonoidAlgebra |
[Zulip discussion](https://leanprover.zulipchat.com/#narrow/stream/287929-mathlib4/topic/merge.20Add-MonoidAlgebra)
* #12646 was found as a consequence of unification.
* #12659 the typo `single 1 1` for `single 0 1`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
t-meta
label:t-algebra$ |
615/986 |
Mathlib.lean,Mathlib/Algebra/MonoidAlgebra/Basic.lean,Mathlib/Algebra/MonoidAlgebra/Division.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Tactic.lean,Mathlib/Tactic/MinMaxTwo.lean,scripts/noshake.json |
7 |
0 |
[] |
nobody |
721-23678 1 year ago |
unknown |
0-0 0 seconds |
| 12984 |
adomani author:adomani |
Adomani/periodic reports dev custom action |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
test-ci
|
366/0 |
.github/workflows/mathlib_stats.yml,.github/workflows/ml_stats_label.yaml,scripts/count_decls.lean,scripts/mathlib_stats.sh |
4 |
69 |
['github-actions'] |
nobody |
721-23678 1 year ago |
unknown |
0-0 0 seconds |
| 13057 |
alreadydone author:alreadydone |
feat(NumberTheory): characterize elliptic divisibility sequences |
Main results:
+ Every `normEDS` is an elliptic divisibility sequence (EDS). The key proof is `rel₄_of_anti_oddRec_evenRec`, based on my original argument first published on [MathSE](https://math.stackexchange.com/a/4903422/12932)
+ Conversely, every EDS is equal to some `normEDS` (assuming that the first two terms are not zero divisors)
---
- [ ] depends on: #13155
- [x] depends on: #13153
- [x] depends on: #10843
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
t-number-theory
blocked-by-other-PR
label:t-algebra$ |
1032/55 |
Mathlib/Algebra/Ring/NegOnePow.lean,Mathlib/Data/Int/Defs.lean,Mathlib/Data/Int/Parity.lean,Mathlib/GroupTheory/Perm/Sign.lean,Mathlib/NumberTheory/EllipticDivisibilitySequence.lean |
5 |
6 |
['Multramate', 'alreadydone', 'kbuzzard'] |
nobody |
721-23678 1 year ago |
789-48106 789 days ago |
0-34672 9 hours |
| 12192 |
Ruben-VandeVelde author:Ruben-VandeVelde |
feat: generalize isLittleO_const_id_atTop/atBot |
From PNT+.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-analysis
|
10/4 |
Mathlib/Analysis/Asymptotics/Asymptotics.lean |
1 |
6 |
['Ruben-VandeVelde', 'llllvvuu', 'urkud'] |
nobody |
721-23677 1 year ago |
825-45773 825 days ago |
1-21749 1 day |
| 10024 |
ADedecker author:ADedecker |
feat: rename `connectedComponentOfOne` to `identityComponent`, prove that it is normal and open |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
awaiting-CI
|
58/24 |
Mathlib/FieldTheory/AbsoluteGaloisGroup.lean,Mathlib/Topology/Algebra/Group/Basic.lean,Mathlib/Topology/Algebra/Group/TopologicalAbelianization.lean,Mathlib/Topology/Algebra/OpenSubgroup.lean,Mathlib/Topology/Connected/Basic.lean |
5 |
0 |
[] |
nobody |
721-23676 1 year ago |
908-15800 908 days ago |
0-832 13 minutes |
| 10521 |
eric-wieser author:eric-wieser |
chore: generalize `IsBoundedLinearMap` to modules |
Most of the lemmas don't actually need the normed on the scalars at all.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-analysis
|
58/42 |
Mathlib/Analysis/NormedSpace/BoundedLinearMaps.lean |
1 |
3 |
['github-actions', 'j-loreaux', 'urkud'] |
nobody |
721-23676 1 year ago |
887-78126 887 days ago |
1-29105 1 day |
| 10721 |
urkud author:urkud |
feat(Order/FunLike): define `PointwiseLE` |
- introduce a mixin class `DFunLike.PointwiseLE`, use it to define `DFunLike.instPartialOrder`;
- add a generic `DFunLike.orderEmbeddingCoe`
- add `DFunLike.PointwiseLE` instances here and there.
With this refactor and #13022, I'm going to generalize lemmas like `MeasureTheory.ae_mono` to `OuterMeasureClass`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [x] depends on: #12983
[](https://gitpod.io/from-referrer/) |
merge-conflict
t-order
t-logic
|
123/50 |
Mathlib.lean,Mathlib/Algebra/Order/Hom/Ring.lean,Mathlib/Data/DFinsupp/Order.lean,Mathlib/Data/Finsupp/Order.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Dynamics/Circle/RotationNumber/TranslationNumber.lean,Mathlib/GroupTheory/Congruence.lean,Mathlib/Order/FunLike.lean,Mathlib/Order/Heyting/Hom.lean,Mathlib/Order/Hom/Basic.lean,Mathlib/Order/Hom/Bounded.lean,Mathlib/Order/Hom/CompleteLattice.lean,Mathlib/Topology/Order/Hom/Basic.lean |
13 |
48 |
['YaelDillies', 'dupuisf', 'urkud'] |
nobody |
721-23676 1 year ago |
771-2078 771 days ago |
64-12984 64 days |
| 10845 |
Shamrock-Frost author:Shamrock-Frost |
Refactor: Make MonoidalFunctor carry the data of an inverse |
We change the definition of a strong monoidal functor from a lax monoidal functor for which the unitor and tensorator are `IsIso` to a lax monoidal functor with the data of inverses for the unitor and tensorator. This requires fixing a lot of knock on effects.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This is a **draft PR**. I would like to talk with people on zulip before merging it, and plan ahead to when we have oplax/colax monoidal functors as well. I'm not sure the approach I took here where `MonoidalFunctor` inherits from `LaxMonoidalFunctor` is a good choice if we want to be lax/oplax symmetric.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
RFC
t-category-theory
|
3799/1589 |
Mathlib/Algebra/Category/ModuleCat/Adjunctions.lean,Mathlib/Algebra/Homology/HomotopyCategory/DegreewiseSplit.lean,Mathlib/CategoryTheory/Adjunction/Basic.lean,Mathlib/CategoryTheory/Adjunction/Mates.lean,Mathlib/CategoryTheory/Adjunction/Opposites.lean,Mathlib/CategoryTheory/Adjunction/Prod.lean,Mathlib/CategoryTheory/Adjunction/Whiskering.lean,Mathlib/CategoryTheory/Bicategory/End.lean,Mathlib/CategoryTheory/Bicategory/SingleObj.lean,Mathlib/CategoryTheory/CatCommSq.lean,Mathlib/CategoryTheory/CatSquares.lean,Mathlib/CategoryTheory/Enriched/Basic.lean,Mathlib/CategoryTheory/Equivalence.lean,Mathlib/CategoryTheory/Iso.lean,Mathlib/CategoryTheory/Monoidal/Adjunction.lean,Mathlib/CategoryTheory/Monoidal/Braided.lean,Mathlib/CategoryTheory/Monoidal/Category.lean,Mathlib/CategoryTheory/Monoidal/Center.lean,Mathlib/CategoryTheory/Monoidal/CommMon_.lean,Mathlib/CategoryTheory/Monoidal/Discrete.lean,Mathlib/CategoryTheory/Monoidal/End.lean,Mathlib/CategoryTheory/Monoidal/Free/Basic.lean,Mathlib/CategoryTheory/Monoidal/Functor.lean,Mathlib/CategoryTheory/Monoidal/Limits.lean,Mathlib/CategoryTheory/Monoidal/Mon_.lean,Mathlib/CategoryTheory/Monoidal/NaturalTransformation.lean,Mathlib/CategoryTheory/Monoidal/Opposite.lean,Mathlib/CategoryTheory/Monoidal/Rigid/FunctorCategory.lean,Mathlib/CategoryTheory/Monoidal/Rigid/OfEquivalence.lean,Mathlib/CategoryTheory/Monoidal/Subcategory.lean,Mathlib/CategoryTheory/Monoidal/Transport.lean,Mathlib/CategoryTheory/Monoidal/Types/Basic.lean,Mathlib/CategoryTheory/Opposites.lean,Mathlib/CategoryTheory/Products/Associator.lean,Mathlib/CategoryTheory/Products/Basic.lean,Mathlib/CategoryTheory/Shift/Basic.lean,Mathlib/CategoryTheory/Shift/Pullback.lean,Mathlib/CategoryTheory/Whiskering.lean,Mathlib/RepresentationTheory/Action/Monoidal.lean,Mathlib/RepresentationTheory/GroupCohomology/Resolution.lean,Mathlib/RepresentationTheory/Rep.lean |
41 |
7 |
['Shamrock-Frost', 'joelriou'] |
nobody |
721-23676 1 year ago |
unknown |
0-0 0 seconds |
| 11100 |
eric-wieser author:eric-wieser |
feat(CategoryTheory/Limits): add `Functor.mapBinaryBiconeInv` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [ ] depends on: #11130
[](https://gitpod.io/from-referrer/)
It's tempting to try to prove something like
```lean
theorem Functor.mapBinaryBiconeInv_toCone [Limits.HasZeroMorphisms C]
[Limits.HasZeroMorphisms D]
(e : D ⥤ C) [IsEquivalence e] {X Y : D} (b : BinaryBicone (e.obj X) (e.obj Y)) :
(e.mapBinaryBiconeInv b).toCone =
(e.mapConeInv <| (Cones.postcompose (pairComp X Y e).symm.hom).obj b.toCone) := by
simp
sorry
theorem Functor.mapBinaryBiconeInv_toCocone [Limits.HasZeroMorphisms C]
[Limits.HasZeroMorphisms D]
(e : D ⥤ C) [IsEquivalence e] {X Y : D} (b : BinaryBicone (e.obj X) (e.obj Y)) :
(e.mapBinaryBiconeInv b).toCocone =
(e.mapCoconeInv <| (Cocones.precompose (pairComp X Y e).hom).obj b.toCocone) := by
sorry
```
but maybe equality is evil here |
merge-conflict
t-category-theory
awaiting-CI
|
52/0 |
Mathlib/CategoryTheory/Adjunction/Basic.lean,Mathlib/CategoryTheory/Equivalence.lean,Mathlib/CategoryTheory/Limits/Preserves/Shapes/Biproducts.lean |
3 |
6 |
['TwoFX', 'eric-wieser'] |
nobody |
721-23676 1 year ago |
unknown |
0-0 0 seconds |
| 8503 |
thorimur author:thorimur |
feat: meta utils for `refine?` |
This PR introduces some metaprogramming infrastructure and utilities that are necessary for `refine?` (#8364).
* `elabTermWithHoles'` (and `withCollectingNewGoalsFrom'`): a more configurable version of `elabTermWithHoles`, which allows: preserving the initial mvar type; *not* tagging untagged goals; and postponing mvars.
* Some `Syntax` and `TSyntax` functionality, including:
* `TSyntax.map`(`M`), for acting on `TSyntax` with functions `f : Syntax -> (m) Syntax`
* Range operations: `includes` and `isEqByRange`
* `setTrailingInfoBy?` and `unsetOriginalTrailing`, which is like `unsetTrailing`, but behaves as expected.
* `Term.withoutModifyingState`, which does not allow unknown mvarIds to escape via the infotree
* `hasNewErrors`, which runs a monad computation and returns the value along with `true` or `false` depending on whether new error messages have been logged
* the option `pp.anonymousMVarSuffixes`, which can be set to `false` to replace all numeric suffixes of anonymous mvars with `✝`, which is useful in tandem with `#guard_msgs` for tests (but is essentially a workaround—although it can make some tactic states more legible).
---
I'm open to suggestions on the location and name of the option/delaborator used for trimming the numeric suffixes of anonymous mvar names (which is used in the tests)—including whether or not it should exist in the first place, as it's essentially just a workaround.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-meta
|
312/5 |
Mathlib.lean,Mathlib/Lean/CoreM.lean,Mathlib/Lean/Elab/Tactic/ElabTerm.lean,Mathlib/Lean/Elab/Term.lean,Mathlib/Util/Delaborators.lean,Mathlib/Util/Syntax.lean |
6 |
2 |
['kmill', 'thorimur'] |
kmill assignee:kmill |
721-23675 1 year ago |
937-82399 937 days ago |
38-46649 38 days |
| 8519 |
eric-wieser author:eric-wieser |
refactor(LinearAlgebra/TensorProduct): golf using `liftAddHom` |
This new `TensorProduct.liftAddHom` doesn't require bilinearity, only that scalar multiplication can be moved between the arguments.
While in theory we only need the `AddMonoidHom` version as it offers exactly the same generality, we first provide an unbundled `liftFun` as this seems to give a sizeable performance boost if used in downstream `lift` variants.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [x] depends on: #8571
- [x] depends on: #8584
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
label:t-algebra$ |
53/50 |
Mathlib/Algebra/Category/AlgebraCat/Monoidal.lean,Mathlib/LinearAlgebra/TensorProduct.lean,Mathlib/LinearAlgebra/TensorProduct/Tower.lean |
3 |
28 |
['bustercopley', 'eric-wieser', 'jcommelin', 'jjaassoonn', 'leanprover-bot', 'mathlib-bors'] |
nobody |
721-23675 1 year ago |
960-75438 960 days ago |
5-6524 5 days |
| 8582 |
eric-wieser author:eric-wieser |
wip |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
3/7 |
Mathlib/Algebra/Category/AlgebraCat/Monoidal.lean,Mathlib/LinearAlgebra/TensorProduct.lean |
2 |
4 |
['eric-wieser', 'leanprover-bot'] |
nobody |
721-23675 1 year ago |
unknown |
0-0 0 seconds |
| 8616 |
eric-wieser author:eric-wieser |
feat(Algebra/FreeAlgebra): add right action and `IsCentralScalar` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [ ] depends on: #8652
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
awaiting-CI
label:t-algebra$ |
30/8 |
Mathlib/Algebra/FreeAlgebra.lean |
1 |
1 |
[] |
nobody |
721-23675 1 year ago |
968-57617 968 days ago |
2-25170 2 days |
| 8658 |
eric-wieser author:eric-wieser |
feat: support right actions for `Con` |
This adds a new `Con.CompatibleSMul` typeclass that captures exactly the condition when `smul` descends to the quotient.
I was not quite able to merge this with `MulAction.QuotientAction`:
* The imports are such that the congruence relation `QuotientGroup.con` is not yet available in that file
* `QuotientGroup.con` requires the subgroup to be normal, while `MulAction.QuotientAction` does not
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
label:t-algebra$ |
80/18 |
Mathlib/GroupTheory/Congruence.lean,Mathlib/RingTheory/Congruence.lean |
2 |
6 |
['YaelDillies', 'eric-wieser'] |
nobody |
721-23675 1 year ago |
937-75722 937 days ago |
29-65537 29 days |
| 8788 |
FMLJohn author:FMLJohn |
feat(Algebra/Module/GradeZeroModule): if `A` is a graded semiring and `M` is a graded `A`-module, then each grade of `M` is a module over the 0-th grade of `A`. |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [ ] depends on: #8187
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
237/4 |
Mathlib.lean,Mathlib/Algebra/DirectSum/Internal.lean,Mathlib/Algebra/GradedMonoid.lean,Mathlib/Algebra/Module/GradeZeroModule.lean,Mathlib/RingTheory/GradedAlgebra/Basic.lean,Mathlib/RingTheory/GradedAlgebra/Noetherian.lean |
6 |
4 |
['FMLJohn', 'github-actions'] |
nobody |
721-23675 1 year ago |
961-13571 961 days ago |
1-57831 1 day |
| 8906 |
jjaassoonn author:jjaassoonn |
feat: add some missing lemmas about linear algebra |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #8905 [lifting injective modules to higher universe]
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
label:t-algebra$ |
45/1 |
Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Module/Injective.lean,Mathlib/LinearAlgebra/Basic.lean,Mathlib/LinearAlgebra/BilinearMap.lean |
4 |
21 |
['AntoineChambert-Loir', 'alreadydone', 'jjaassoonn'] |
nobody |
721-23675 1 year ago |
956-83169 956 days ago |
0-343 5 minutes |
| 8961 |
eric-wieser author:eric-wieser |
refactor: use the coinduced topology on ULift |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [x] depends on: #8958
[](https://gitpod.io/from-referrer/)
|
please-adopt
merge-conflict
awaiting-author
awaiting-CI
|
46/14 |
Mathlib/Analysis/Normed/Group/Basic.lean,Mathlib/Topology/Bornology/Constructions.lean,Mathlib/Topology/Constructions.lean |
3 |
6 |
['eric-wieser', 'github-actions', 'urkud'] |
nobody |
721-23675 1 year ago |
954-55505 954 days ago |
0-1 1 second |
| 9146 |
laughinggas author:laughinggas |
feat(Data/ZMod/Defs): Topological structure on `ZMod` |
Added a discrete topology structure to `ZMod n` for all `n`
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
awaiting-author
t-topology
label:t-algebra$ |
55/3 |
Mathlib.lean,Mathlib/Topology/Algebra/Constructions.lean,Mathlib/Topology/Algebra/Group/Basic.lean,Mathlib/Topology/Instances/ZMod.lean,Mathlib/Topology/Maps.lean |
5 |
61 |
['YaelDillies', 'eric-wieser', 'github-actions', 'jcommelin', 'laughinggas', 'mo271', 'urkud'] |
nobody |
721-23675 1 year ago |
927-68166 927 days ago |
7-11053 7 days |
| 9229 |
eric-wieser author:eric-wieser |
refactor(Algebra/GradedMonoid): Use `HMul` to define `GMul` |
This make the notation much nicer, but I'm pretty sure this is a bad idea for performance / ambiguity reasons.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-algebra
label:t-algebra$ |
114/125 |
Mathlib/Algebra/DirectSum/Algebra.lean,Mathlib/Algebra/DirectSum/Internal.lean,Mathlib/Algebra/DirectSum/Ring.lean,Mathlib/Algebra/GradedMonoid.lean,Mathlib/Algebra/GradedMulAction.lean,Mathlib/Algebra/Module/GradedModule.lean,Mathlib/Algebra/MonoidAlgebra/ToDirectSum.lean,Mathlib/LinearAlgebra/TensorAlgebra/ToTensorPower.lean,Mathlib/LinearAlgebra/TensorPower.lean,Mathlib/LinearAlgebra/TensorProduct/Graded/Internal.lean,Mathlib/RingTheory/GradedAlgebra/Basic.lean |
11 |
6 |
['eric-wieser', 'leanprover-bot'] |
nobody |
721-23675 1 year ago |
unknown |
0-0 0 seconds |
| 9252 |
astrainfinita author:astrainfinita |
chore: remove redundant covariance instances, add priority |
I noticed that the following code is surprisingly slow.
``` lean
import Mathlib
count_heartbeats in
example {n : ℕ} : CovariantClass (Fin (n + 1)) (Fin (n + 1)) (· + ·) (· < ·) := by
try infer_instance
sorry
```
This PR removed some redundant instances. The heartbeats have dropped from 19118 to 11450 (still too slow).
Lean4 still seems to make some redundant attempts. See also https://github.com/leanprover-community/mathlib4/issues/6646#issuecomment-1691792488.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
t-order
merge-conflict
slow-typeclass-synthesis
awaiting-author
label:t-algebra$ |
40/32 |
Mathlib/Algebra/CovariantAndContravariant.lean,Mathlib/Algebra/Order/Group/Defs.lean,Mathlib/Algebra/Order/Monoid/Defs.lean,Mathlib/CategoryTheory/Abelian/DiagramLemmas/Four.lean |
4 |
8 |
['astrainfinita', 'leanprover-bot', 'urkud'] |
nobody |
721-23675 1 year ago |
unknown |
0-0 0 seconds |
| 9354 |
chenyili0818 author:chenyili0818 |
feat: monotonicity of gradient on convex real-valued functions |
This file is based on Mathlib.Analysis.Calculus.Gradient.Basic, and describes the calculation properties
co-authored-by: Ziyu Wang [tropicalfish910@gmail.com](mailto:tropicalfish910@gmail.com)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-analysis
|
540/0 |
Mathlib.lean,Mathlib/Analysis/Convex/ConvexFunction.lean |
2 |
15 |
['github-actions', 'winstonyin'] |
nobody |
721-23675 1 year ago |
911-54301 911 days ago |
23-36394 23 days |
| 9356 |
alexjbest author:alexjbest |
feat: assumption? |
A little helper for replacing `assumption`s with `exact` statements quickly
---
If this is approved I will add tests
This begs the question of whether it might simply be better to add some sort of code action for "replace with trythis output"
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-meta
|
24/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Common.lean,Mathlib/Tactic/TryAssumption.lean |
4 |
5 |
['alexjbest', 'j-loreaux', 'jcommelin'] |
nobody |
721-23675 1 year ago |
915-59673 915 days ago |
19-26336 19 days |
| 9469 |
dupuisf author:dupuisf |
feat: maximum modulus principle for functions vanishing at infinity |
This PR adds versions of the maximum modulus principle for functions vanishing at infinity that parallel those we already had for functions over a bounded set. These will have applications in e.g. norm interpolation.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-analysis
|
71/0 |
Mathlib/Analysis/Complex/AbsMax.lean |
1 |
8 |
['dupuisf', 'j-loreaux'] |
nobody |
721-23675 1 year ago |
915-64921 915 days ago |
12-86009 12 days |
| 9482 |
yuma-mizuno author:yuma-mizuno |
refactor(CategoryTheory/Monoidal): add `LaxMonoidalStruct` |
Add a `LaxMonoidalStruct` with only the unit morphism `ε` and the tensorator `μ`. This is used in #6307 to provide two different constructors for `LaxMonoidal` that have common `ε` and `μ` but use the tensor of morphisms or the whiskerings.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-category-theory
|
21/8 |
Mathlib/Algebra/Category/ModuleCat/Adjunctions.lean,Mathlib/CategoryTheory/Monoidal/Functorial.lean,Mathlib/CategoryTheory/Monoidal/Limits.lean |
3 |
0 |
[] |
nobody |
721-23675 1 year ago |
unknown |
0-0 0 seconds |
| 9487 |
eric-wieser author:eric-wieser |
feat: the exponential of dual numbers over non-commutative rings |
This is a work in progress, as I don't know my way around the measure theory library.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
-->
- [x] depends on: #9489
- [x] depends on: #9486
- [x] depends on: #10427
- [ ] depends on: #10452
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
t-measure-probability
merge-conflict
t-analysis
label:t-algebra$ |
97/0 |
Mathlib/Analysis/NormedSpace/TrivSqZeroExt.lean |
1 |
7 |
['github-actions'] |
nobody |
721-23675 1 year ago |
unknown |
0-0 0 seconds |
| 9504 |
alreadydone author:alreadydone |
chore: remove some IsSeparable assumptions |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-algebra
label:t-algebra$ |
41/14 |
Mathlib/NumberTheory/NumberField/Norm.lean,Mathlib/RingTheory/Norm.lean |
2 |
0 |
[] |
nobody |
721-23675 1 year ago |
unknown |
0-0 0 seconds |
| 9510 |
eric-wieser author:eric-wieser |
feat(Analysis/Calculus/DualNumber): Extending differentiable functions to dual numbers |
This shows that this operation preserves multiplication and composition
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
t-algebra
t-analysis
awaiting-CI
label:t-algebra$ |
119/0 |
Mathlib/Analysis/Calculus/DualNumber.lean |
1 |
4 |
['github-actions'] |
nobody |
721-23675 1 year ago |
unknown |
0-0 0 seconds |
| 9570 |
eric-wieser author:eric-wieser |
feat(Algebra/Star): Non-commutative generalization of `StarModule` |
[Zulip thread](https://leanprover.zulipchat.com/#narrow/stream/116395-maths/topic/Star.20modules.20over.20non-commutative.20scalars/near/383664005).
Until we address #7152, we have to have both `StarModule` and `StarModule'`.
To prove this generalization is useful, this shows that with it as an assumption, `TrivSqZeroExt` is a `StarRing`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-algebra
awaiting-CI
label:t-algebra$ |
66/6 |
Mathlib/Algebra/Star/Basic.lean,Mathlib/Algebra/Star/Pi.lean,Mathlib/Algebra/Star/Prod.lean,Mathlib/Algebra/TrivSqZeroExt.lean |
4 |
0 |
[] |
nobody |
721-23675 1 year ago |
unknown |
0-0 0 seconds |
| 9642 |
eric-wieser author:eric-wieser |
refactor(Analysis/Normed/{Group/Field}/Basic): Let `extends` generate the repeated fields |
New-style structure shenanigans mean that instance constructors randomly complain about a missing field that can be found with `__ : MetricSpace _ := infer_instance`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
I will write a longer PR description for this once CI is happy
|
WIP
merge-conflict
awaiting-author
help-wanted
t-analysis
|
122/202 |
Mathlib/Analysis/Calculus/ContDiff/Basic.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/Matrix.lean,Mathlib/Analysis/Normed/Field/Basic.lean,Mathlib/Analysis/Normed/Group/Basic.lean,Mathlib/Analysis/Normed/Group/Completion.lean,Mathlib/Analysis/Normed/Order/Basic.lean,Mathlib/Analysis/NormedSpace/ProdLp.lean,Mathlib/Analysis/NormedSpace/Star/Matrix.lean,Mathlib/Analysis/NormedSpace/Unitization.lean,Mathlib/Analysis/Quaternion.lean,Mathlib/Geometry/Manifold/Instances/Sphere.lean,Mathlib/InformationTheory/Hamming.lean,Mathlib/MeasureTheory/Measure/Lebesgue/VolumeOfBalls.lean,Mathlib/NumberTheory/NumberField/CanonicalEmbedding.lean,Mathlib/NumberTheory/Padics/PadicIntegers.lean,Mathlib/Topology/ContinuousFunction/Bounded.lean |
17 |
11 |
['eric-wieser', 'leanprover-bot', 'urkud'] |
nobody |
721-23675 1 year ago |
unknown |
0-0 0 seconds |
| 6580 |
adomani author:adomani |
chore: `move_add`-driven replacements |
This PR accompanies #6576 and uses `move_add/mul` to simplify/streamline a selection of proofs.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
|
12/13 |
Counterexamples/Monic_nonRegular.lean,Mathlib/Algebra/Associated.lean,Mathlib/Data/Polynomial/RingDivision.lean,Mathlib/LinearAlgebra/QuadraticForm/Basic.lean |
4 |
0 |
[] |
nobody |
721-23674 1 year ago |
1006-72838 1006 days ago |
62-34247 62 days |
| 6630 |
MohanadAhmed author:MohanadAhmed |
feat: Reduced Spectral Theorem |
For A hermitian matrix $A : n \times n$ with rank $A.rank \leq n$, we can eliminate the zero eigenvalues and their corresponding eigenvectors from the (alternate) spectral theorem. As such the matrix $A$ can be written as: $$A = V₁ D V₁ᴴ$$ where
- $V₁$ : $n \times r$ is the matrix of eigenvector with non-zero associated eigenvalues.
- $D$ is $r \times r$ is the diagonal matrix containing only non-zero eigenvalues on its main diagonal.
with $r = A.rank$ being the rank of the matrix
Towards that goal we make several equivalence definitions:
- `{i // hA.eigenvalues i ≠ 0} ≃ Fin (A.rank)` the set of non-zero eigenvalues can be indexed by the numbers from 0 to (r - 1).
- `{i // ¬ hA.eigenvalues i ≠ 0} ≃ Fin (n - A.rank)` the set of non-zero eigenvalues can be indexed by the numbers from 0 to (n - r - 1).
- `{i // hA.eigenvalues i ≠ 0} ⊕ {i // ¬hA.eigenvalues i ≠ 0} ≃ n`: the index set of the matrix (together with the associated eigenvector matrix and eigenvalues matrix ) can be partitioned into two complement groups the ones corresponding to non-zero eigenvalues and the ones corresponding to zero eigenvalues.
- We can then put the previous definitions together to obtain a: `Fin (A.rank) ⊕ Fin (Fintype.card n - A.rank) ≃ n`
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-algebra
label:t-algebra$ |
31/0 |
Mathlib/LinearAlgebra/Matrix/Spectrum.lean |
1 |
0 |
[] |
nobody |
721-23674 1 year ago |
unknown |
0-0 0 seconds |
| 6791 |
eric-wieser author:eric-wieser |
refactor: Use flat structures for morphisms |
This restores the symmetry we had in Lean3, where we had `MonoidHom.mk f one mul` not `MonoidHom.mk (OneHom.mk f one) mul`, and `f.toFun` wasn't notation for `f.toMulHom.toFun`.
The nesting provided by the previous inheritance is useless to us in the face of `MonoidHomClass.toMonoidHom`, which completely eta-expands the structure anyway.
We call the class `FunLikeFlatHack._` because this means the field is called `to_` which uses up less space in the goal view than any alternative.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
help-wanted
awaiting-CI
|
174/201 |
Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/Algebra/Algebra/Hom.lean,Mathlib/Algebra/Category/GroupCat/ZModuleEquivalence.lean,Mathlib/Algebra/Category/GroupWithZeroCat.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf.lean,Mathlib/Algebra/Category/MonCat/Basic.lean,Mathlib/Algebra/Group/Ext.lean,Mathlib/Algebra/Group/Prod.lean,Mathlib/Algebra/Group/UniqueProds.lean,Mathlib/Algebra/Hom/Equiv/Basic.lean,Mathlib/Algebra/Hom/Group/Defs.lean,Mathlib/Algebra/Hom/GroupAction.lean,Mathlib/Algebra/Hom/NonUnitalAlg.lean,Mathlib/Algebra/Hom/Ring/Defs.lean,Mathlib/Algebra/Lie/Basic.lean,Mathlib/Algebra/Module/Equiv.lean,Mathlib/Algebra/Module/LinearMap.lean,Mathlib/Algebra/Order/Hom/Ring.lean,Mathlib/Algebra/Order/Interval.lean,Mathlib/Algebra/Ring/Equiv.lean,Mathlib/Analysis/Normed/Group/SemiNormedGroupCat.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/Rat/Cast/CharZero.lean,Mathlib/Data/Real/EReal.lean,Mathlib/Data/Real/Sqrt.lean,Mathlib/GroupTheory/FreeAbelianGroup.lean,Mathlib/GroupTheory/MonoidLocalization.lean,Mathlib/LinearAlgebra/Quotient.lean,Mathlib/LinearAlgebra/TensorProduct.lean,Mathlib/RingTheory/RingInvo.lean,Mathlib/Topology/Algebra/Module/Basic.lean,Mathlib/Topology/MetricSpace/Dilation.lean |
32 |
0 |
[] |
nobody |
721-23674 1 year ago |
unknown |
0-0 0 seconds |
| 6930 |
kmill author:kmill |
feat: `resynth_instances` tactic for resynthesizing instances in the goal or local context |
This tactic can be useful for debugging non-canonical instances or for fixing up goals and hypotheses after using the `classical` tactic.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-meta
|
327/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/ResynthInstances.lean,test/ResynthInstances.lean |
4 |
0 |
[] |
nobody |
721-23674 1 year ago |
unknown |
0-0 0 seconds |
| 6931 |
urkud author:urkud |
refactor(Analysis/Normed*): use `RingHomIsometric` for `*.norm_cast` |
---
I don't understand why linter fails.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
help-wanted
t-analysis
|
78/68 |
Mathlib/Analysis/LocallyConvex/ContinuousOfBounded.lean,Mathlib/Analysis/Normed/Field/Basic.lean,Mathlib/Analysis/Normed/Group/Basic.lean,Mathlib/Analysis/NormedSpace/Basic.lean,Mathlib/Analysis/NormedSpace/Exponential.lean,Mathlib/Analysis/NormedSpace/Spectrum.lean,Mathlib/Analysis/RCLike/Basic.lean,Mathlib/NumberTheory/NumberField/Embeddings.lean |
8 |
0 |
[] |
nobody |
721-23674 1 year ago |
unknown |
0-0 0 seconds |
| 7225 |
jjaassoonn author:jjaassoonn |
some random stuff |
- Consider two commutative rings `R` and `S` and `X` and `(R, S)`-bimodule.
Consider the tensor functor `(X ⊗[R] .)` from the category of `R`-modules to the category of `S`-modules and the hom functor `X →ₗ[S] .` from the category of `S`-modules to the category of `R`-modules, they form an adjunction.
- direct limits of modules commute with tensor product
- A proof of 
Three definitions for flatness:
1. in terms of injectiveness
```lean
def Flat.injective : Prop :=
∀ ⦃N N' : ModuleCat.{u} R⦄ (L : N ⟶ N'),
Function.Injective L → Function.Injective ((tensorRight (ModuleCat.of R M)).map L)
```
2. in terms of ideals
```lean
def Flat.ideal : Prop :=
∀ (I : Ideal R), Function.Injective (TensorProduct.lift ((lsmul R M).comp I.subtype))
```
3. in terms of finitely generated ideal
```lean
def Flat.fg_ideal : Prop :=
∀ ⦃I : Ideal R⦄ (_ : I.FG), Function.Injective (TensorProduct.lift ((lsmul R M).comp I.subtype))
```
and they are all equivalent:
```lean
lemma tfae : List.TFAE
[ Flat.injective R M,
Flat.ideal R M,
Flat.fg_ideal R M ] := by
```
The dependencies between these changed files are:
```
Algebra.Module.LinearMap---------------------------------
| |
| |
v v
Algebra.Category.ModuleCat.TensorProduct -----> Algebra.Character
|
|
|
v
Algebra.DirectLimitAndTensorProduct -------------> RingTheory.Flat
```
to prove equivalence of other definitions, e.g. exact functor, tor, etc should be easier with this because the proof is will be categorical
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
-------------
Some other stuff not about flatness
1. If $S$ is a submonoid and $I$ is maximally disjoint from $S$ then $I$ is prime
2. if $\mathfrak p$ is a minimal prime, then $x \in \mathfrak p$ implies that $x$ is a zero divisor
3. Noetherian rings has only finitely many minimal ideals
4. One version of [the prime avoidance lemma](https://en.wikipedia.org/wiki/Prime_avoidance_lemma): if $E$ is an addsubgroup of a ring and is mutiplicatively closed, and $\mathfrak p_i$ is some prime ideals, then not being any subset of the individual prime ideal implies that not being a subset of their union
----------
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
1828/16 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/TensorProduct.lean,Mathlib/Algebra/Character.lean,Mathlib/Algebra/DirectLimitAndTensorProduct.lean,Mathlib/Algebra/Module/LinearMap.lean,Mathlib/AlgebraicGeometry/PrimeSpectrum/Basic.lean,Mathlib/AlgebraicGeometry/PrimeSpectrum/Noetherian.lean,Mathlib/CategoryTheory/Functor/Fin.lean,Mathlib/CategoryTheory/ShortExactSequence.lean,Mathlib/RingTheory/Flat.lean,Mathlib/RingTheory/Ideal/Basic.lean,Mathlib/RingTheory/Ideal/MinimalPrime.lean,Mathlib/RingTheory/Ideal/PrimeAvoidance.lean |
13 |
6 |
['eric-wieser', 'jjaassoonn'] |
nobody |
721-23674 1 year ago |
unknown |
0-0 0 seconds |
| 7227 |
kmill author:kmill |
feat: flexible binders and integration into notation3 |
Introduces `flexibleBinders`, which is an extensible system for binder notations that allow destructuring, bounded domains, and other niceties. Integrates this into `notation3`, and makes `Finset.sum`/`Finset.prod` use it.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #6833
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-meta
|
1215/131 |
Mathlib.lean,Mathlib/Algebra/BigOperators/Basic.lean,Mathlib/Algebra/BigOperators/Intervals.lean,Mathlib/Algebra/BigOperators/NatAntidiagonal.lean,Mathlib/Mathport/Notation.lean,Mathlib/Util/FlexibleBinders.lean,Mathlib/Util/FlexibleBindersFinset.lean,Mathlib/Util/SyntaxFun.lean,test/FlexibleBinders.lean,test/notation3.lean |
10 |
3 |
['eric-wieser', 'kmill'] |
nobody |
721-23674 1 year ago |
unknown |
0-0 0 seconds |
| 7351 |
shuxuezhuyi author:shuxuezhuyi |
feat(Topology/Algebra/Order): extend function on `Ioo` to `Icc` |
Extend a strictly monotone function defined on an open interval.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-order
|
59/0 |
Mathlib.lean,Mathlib/Data/Set/Function.lean,Mathlib/Topology/Algebra/Order/IccExtendFromIoo.lean |
3 |
7 |
['j-loreaux', 'shuxuezhuyi'] |
nobody |
721-23674 1 year ago |
999-78902 999 days ago |
30-32706 30 days |
| 7467 |
ADedecker author:ADedecker |
feat: spectrum of X →ᵇ ℂ is StoneCech X |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-analysis
|
121/23 |
Mathlib/Analysis/NormedSpace/Star/BoundedContinuousFunction.lean,Mathlib/Analysis/NormedSpace/Star/GelfandDuality.lean,Mathlib/Topology/ContinuousFunction/Bounded.lean,Mathlib/Topology/ContinuousFunction/Compact.lean |
4 |
1 |
['github-actions'] |
nobody |
721-23674 1 year ago |
unknown |
0-0 0 seconds |
| 7512 |
Komyyy author:Komyyy |
perf: override the data structures of coinductive types |
The data structures of the model of coinductive types (`Stream'`, `Computation`, `Stream'.Seq`) are inefficient, so we override their data structures.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #7514
- [ ] depends on: leanprover/lean4#2292
- [x] depends on: leanprover/std4#371
- [x] depends on: #8460
[](https://gitpod.io/from-referrer/)
|
WIP
blocked-by-core-PR
blocked-by-other-PR
merge-conflict
t-meta
|
6919/3700 |
Mathlib.lean,Mathlib/Algebra/ContinuedFractions/Basic.lean,Mathlib/Algebra/ContinuedFractions/Computation/ApproximationCorollaries.lean,Mathlib/Algebra/ContinuedFractions/Computation/Approximations.lean,Mathlib/Algebra/ContinuedFractions/Computation/Basic.lean,Mathlib/Algebra/ContinuedFractions/Computation/CorrectnessTerminating.lean,Mathlib/Algebra/ContinuedFractions/Computation/TerminatesIffRat.lean,Mathlib/Algebra/ContinuedFractions/Computation/Translations.lean,Mathlib/Algebra/ContinuedFractions/ContinuantRecurrence.lean,Mathlib/Algebra/ContinuedFractions/EvalEquiv.lean,Mathlib/Algebra/ContinuedFractions/Real.lean,Mathlib/Algebra/ContinuedFractions/TerminatedStable.lean,Mathlib/Algebra/ContinuedFractions/Translations.lean,Mathlib/Combinatorics/Hindman.lean,Mathlib/Control/Fix.lean,Mathlib/Control/LawfulFix.lean,Mathlib/Data/Seq/Computation.lean,Mathlib/Data/Seq/Parallel.lean,Mathlib/Data/Seq/Seq.lean,Mathlib/Data/Seq/WSeq.lean,Mathlib/Data/Stream.lean,lean-toolchain |
22 |
2 |
['digama0'] |
nobody |
721-23674 1 year ago |
unknown |
0-0 0 seconds |
| 7564 |
shuxuezhuyi author:shuxuezhuyi |
feat(Topology/Algebra/Order): extend strictly monotone function on `Ioo` to homeomorphism on `Icc` |
A strictly monotone function between open intervals can be extended to a homeomorphism between the closed intervals.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #7351
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
blocked-by-other-PR
|
162/0 |
Mathlib.lean,Mathlib/Topology/Algebra/Order/IccExtendFromIoo.lean |
2 |
1 |
[] |
nobody |
721-23674 1 year ago |
1019-10906 1019 days ago |
0-537 8 minutes |
| 7601 |
digama0 author:digama0 |
feat: ring hom support in `ring` |
As [requested on Zulip](https://leanprover.zulipchat.com/#narrow/stream/287929-mathlib4/topic/aroots/near/395750055). Adds support for distributing ring morphisms in `ring`:
```lean
example (p : ℤ[X]) (r : ℤ) : C (2 * r) * p = C r * p + C r * p := by ring
```
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
t-meta
label:t-algebra$ |
257/48 |
Mathlib/Tactic/Ring/Basic.lean,test/linear_combination.lean,test/ring.lean |
3 |
1 |
['eric-wieser'] |
nobody |
721-23674 1 year ago |
954-7277 954 days ago |
62-28836 62 days |
| 7835 |
shuxuezhuyi author:shuxuezhuyi |
feat(LinearAlgebra/Matrix): `lift` for projective special linear group |
We provide converters to help with the use of "quotient.liftOn" on projective special linear groups.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #7826
- [x] depends on: #7791
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
label:t-algebra$ |
52/0 |
Mathlib/LinearAlgebra/Matrix/ProjectiveSpecialLinearGroup.lean |
1 |
3 |
['jcommelin', 'shuxuezhuyi'] |
jcommelin assignee:jcommelin |
721-23674 1 year ago |
867-33505 867 days ago |
1-85797 1 day |
| 7875 |
astrainfinita author:astrainfinita |
chore: make `SMulCommClass A A B` and `SMulCommClass A B B` higher priority |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
slow-typeclass-synthesis
t-algebra
label:t-algebra$ |
54/48 |
Mathlib/Algebra/Algebra/Basic.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/DirectSum/Algebra.lean,Mathlib/Algebra/Group/Action/Defs.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Lie/NonUnitalNonAssocAlgebra.lean,Mathlib/Algebra/Module/LinearMap/End.lean,Mathlib/Algebra/MonoidAlgebra/Basic.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/Ring/CentroidHom.lean,Mathlib/Algebra/Ring/Subring/Basic.lean,Mathlib/Algebra/Ring/Subsemiring/Basic.lean,Mathlib/Algebra/Star/NonUnitalSubalgebra.lean,Mathlib/Analysis/Complex/UnitDisc/Basic.lean,Mathlib/Analysis/NormedSpace/lpSpace.lean,Mathlib/Data/Matrix/Basic.lean,Mathlib/GroupTheory/GroupAction/Prod.lean,Mathlib/GroupTheory/GroupAction/Ring.lean,Mathlib/GroupTheory/GroupAction/SubMulAction.lean,Mathlib/GroupTheory/MonoidLocalization.lean,Mathlib/GroupTheory/Submonoid/Center.lean,Mathlib/LinearAlgebra/PiTensorProduct.lean,Mathlib/RingTheory/Ideal/Quotient.lean,Mathlib/RingTheory/TensorProduct/Basic.lean,Mathlib/Topology/ContinuousFunction/ContinuousMapZero.lean,Mathlib/Topology/ContinuousFunction/StoneWeierstrass.lean,Mathlib/Topology/ContinuousFunction/ZeroAtInfty.lean |
27 |
15 |
['Parcly-Taxel', 'astrainfinita', 'jcommelin', 'leanprover-bot'] |
nobody |
721-23674 1 year ago |
775-40182 775 days ago |
1-47913 1 day |
| 7932 |
eric-wieser author:eric-wieser |
refactor(Algebra/TrivSqZeroExt): replace with a structure |
This is dogfooding my claim that "one-field structures are the lesser evil in Lean 4".
This runs into the `simp [(stupid_parens)]` bug; or rather, a particular nasty instance of it where the offending simp call is inside `@[simps]`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
awaiting-CI
label:t-algebra$ |
155/73 |
Mathlib/Algebra/DualNumber.lean,Mathlib/Algebra/TrivSqZeroExt.lean,Mathlib/Logic/Equiv/TransferInstance.lean,Mathlib/Topology/Instances/TrivSqZeroExt.lean |
4 |
1 |
['github-actions'] |
nobody |
721-23674 1 year ago |
unknown |
0-0 0 seconds |
| 7962 |
eric-wieser author:eric-wieser |
feat: `DualNumber (Quaternion R)` as a `CliffordAlgebra` |
This provides a clifford algebra isomorphic to the dual quaternions
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
-->
- [x] depends on: #7934
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-algebra
label:t-algebra$ |
307/7 |
Mathlib/Algebra/DualNumber.lean,Mathlib/Algebra/QuaternionBasis.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Equivs.lean |
3 |
16 |
['github-actions'] |
nobody |
721-23674 1 year ago |
unknown |
0-0 0 seconds |
| 8364 |
thorimur author:thorimur |
feat: `refine?` |
This PR adds `refine? e`, which suggests replacing unsynthesized `_`'s in `e` with `?_` in order to make `refine e'` work:
```lean
example : Nat → Nat := by
refine? fun (_ : _) => _ -- Try this: refine fun (_ : _) => ?_
```
Note that this only suggests replacements for `_`'s present in the syntax; to create goals for implicit or instance arguments, the user is expected to use `refine'`.
---
I'm especially open to suggestions on the filename (currently `RefineFix`).
I'm also curious if this behaves as expected! Feel free to try it out "in real life" and comment here on edge cases.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #8503
[](https://gitpod.io/from-referrer/)
|
merge-conflict
blocked-by-other-PR
t-meta
|
684/5 |
Mathlib.lean,Mathlib/Lean/CoreM.lean,Mathlib/Lean/Elab/Tactic/ElabTerm.lean,Mathlib/Lean/Elab/Term.lean,Mathlib/Tactic.lean,Mathlib/Tactic/RefineFix.lean,Mathlib/Util/Delaborators.lean,Mathlib/Util/Syntax.lean,test/RefineFix.lean |
9 |
5 |
['j-loreaux', 'thorimur'] |
nobody |
721-23674 1 year ago |
976-43808 976 days ago |
6-59892 6 days |
| 3575 |
Kha author:Kha |
perf: selectively enable precompilation |
---
This is an initial performance test on Linux. TODO:
- [ ] test on macOS and Windows as well
- [ ] adapt caching |
merge-conflict
WIP
|
3/0 |
lakefile.lean |
1 |
21 |
['Kha', 'kim-em', 'leanprover-bot', 'tydeu'] |
nobody |
721-23673 1 year ago |
unknown |
0-0 0 seconds |
| 4771 |
thorimur author:thorimur |
feat: Backtrack minimize |
Utilities for backtracking in order to attain a minimum according to some arbitrary notion of size when generating lists of parts and alternatives in alternating fashion. Motivated by minimizing the number of generated subgoals under apply-like actions on the goal.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
|
482/1 |
Mathlib/Tactic/Backtracking.lean,test/Backtracking.lean |
2 |
0 |
[] |
nobody |
721-23673 1 year ago |
unknown |
0-0 0 seconds |
| 4775 |
thorimur author:thorimur |
feat: `SubExpr` utilities |
This file contains utilities for handling positions in expressions, including folding over subexpressions along with their positions.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-meta
|
148/0 |
Mathlib.lean,Mathlib/Lean/SubExpr.lean |
2 |
0 |
[] |
nobody |
721-23673 1 year ago |
unknown |
0-0 0 seconds |
| 4785 |
thorimur author:thorimur |
feat: ExprWithLevels |
This introduces `ExprWithLevels`, a means of emulating universe polymorphism for non-constants during metaprogramming. [Description pending]
- [ ] depends on: #4786
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
blocked-by-other-PR
t-meta
|
491/1 |
Mathlib.lean,Mathlib/Lean/Meta/AppBuilder.lean,Mathlib/Lean/Meta/Basic.lean,Mathlib/Lean/Meta/ExprWithLevels.lean |
4 |
1 |
['kim-em'] |
nobody |
721-23673 1 year ago |
unknown |
0-0 0 seconds |
| 4871 |
j-loreaux author:j-loreaux |
feat: define the additive submonoid of positive elements in a star ordered ring |
This file defines the `AddSubmonoid` of nonegative elements `StarOrderedRing.positive R` in a star ordered ring `R` with carrier `{ x : R | 0 ≤ x }` (in fact, the definition only requires `OrderedAddCommMonoid R` to allow for other use cases, but it is primarily intended for `StarOrderedRing R`). Equivalently, this is the `AddSubmonoid` generated by the elements of the form `star s * s`. Even though this technically corresponds to the nonnegative elements, the "positive" terminology is standard throughout the literature (at least in C⋆-algebra theory and operator theory), so we choose to prefer that.
The advantage of using this over other definitions of positivity is that it allows us to unify several different concepts under a single umbrella. For example, one might be tempted to consider the collection of bounded linear operators on an Hilbert space and define positivity as `∀ x, 0 ≤ ⟪T x, x⟫`, but this doesn't generalize nicely to C⋆-algebras. Alternatively, one could define positivity as those self-adjoint elements with nonnegative spectrum, but this requires the algebra to be unital. Our definition herein conveniently sidesteps these issues.
---
Note: I declared the `AddMonoidWithOne` and `AddGroupWithOne` instances for `selfAdjoint R` separately because it made the proof of the latter easier.
- [x] depends on: #6229
- [x] depends on: #10209
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
awaiting-CI
label:t-algebra$ |
216/12 |
Mathlib.lean,Mathlib/Algebra/Order/Ring/CharZero.lean,Mathlib/Algebra/Star/Order.lean,Mathlib/Algebra/Star/Positive.lean,Mathlib/Algebra/Star/SelfAdjoint.lean,Mathlib/GroupTheory/Submonoid/Operations.lean |
6 |
28 |
['eric-wieser', 'j-loreaux'] |
nobody |
721-23673 1 year ago |
1134-9725 1134 days ago |
5-55287 5 days |
| 5133 |
kmill author:kmill |
feat: IntermediateField adjoin syntax for sets of elements |
Adds support for both `F⟮S⟯` and `F⟮α⟯`. The term `x` in `F⟮x⟯` is elaborated, and if it has type `Set _` the first interpretation is used, and otherwise the second is.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-algebra
label:t-algebra$ |
110/55 |
Mathlib/FieldTheory/Adjoin.lean |
1 |
0 |
[] |
nobody |
721-23673 1 year ago |
1132-24799 1132 days ago |
0-20 20 seconds |
| 5912 |
ADedecker author:ADedecker |
feat(Analysis.Distribution.ContDiffMapSupportedIn): space of smooth maps with support in a fixed compact |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-analysis
|
513/13 |
Mathlib.lean,Mathlib/Analysis/Distribution/ContDiffMapSupportedIn.lean,Mathlib/Analysis/LocallyConvex/WithSeminorms.lean,Mathlib/Analysis/Seminorm.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/Set/Function.lean,Mathlib/Topology/Algebra/Module/StrongTopology.lean,Mathlib/Topology/ContinuousFunction/Bounded.lean |
8 |
0 |
[] |
nobody |
721-23673 1 year ago |
unknown |
0-0 0 seconds |
| 6002 |
slerpyyy author:slerpyyy |
feat(Analysis.SpecialFunctions.Gaussian): add `integrable_fun_mul_exp_neg_mul_sq` |
If `f : ℝ → ℝ` is bounded by a polynomial, `fun x : ℝ => f x * exp (-b * x ^ 2)` is integrable.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-analysis
|
26/0 |
Mathlib/Analysis/SpecialFunctions/Gaussian.lean |
1 |
3 |
['ocfnash', 'slerpyyy', 'urkud'] |
nobody |
721-23673 1 year ago |
1089-24035 1089 days ago |
9-71263 9 days |
| 6195 |
eric-wieser author:eric-wieser |
chore(RingTheory/TensorProduct): golf the `mul` definition |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
-->
- [x] depends on: #6211
- [x] depends on: #6187
[](https://gitpod.io/from-referrer/)
Strangely this causes a timeout downstream
|
merge-conflict
t-algebra
awaiting-CI
label:t-algebra$ |
4/29 |
Mathlib/RingTheory/TensorProduct.lean |
1 |
1 |
[] |
nobody |
721-23673 1 year ago |
unknown |
0-0 0 seconds |
| 6307 |
yuma-mizuno author:yuma-mizuno |
refactor(CategoryTheory/Monoidal): add whiskering operators |
We introduce whiskering operators. This allows us to introduce a simp-normal form for morphisms in monoidal categories. Rewriting into simp-normal forms is especially useful when combined with the coherence tactic.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #6420
- [x] depends on: #8191
- [x] depends on: #9988
- [x] depends on: #9991
- [x] depends on: #9995
- [x] depends on: #10061
- [x] depends on: #10078
- [x] depends on: #10898
- [x] depends on: #10912
- [x] depends on: #11223
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-category-theory
|
325/280 |
Mathlib/Algebra/Category/ModuleCat/Adjunctions.lean,Mathlib/CategoryTheory/Bicategory/End.lean,Mathlib/CategoryTheory/Closed/Ideal.lean,Mathlib/CategoryTheory/Monoidal/Category.lean,Mathlib/CategoryTheory/Monoidal/Center.lean,Mathlib/CategoryTheory/Monoidal/Free/Basic.lean,Mathlib/CategoryTheory/Monoidal/Free/Coherence.lean,Mathlib/CategoryTheory/Monoidal/Functor.lean,Mathlib/CategoryTheory/Monoidal/FunctorCategory.lean,Mathlib/CategoryTheory/Monoidal/Limits.lean,Mathlib/CategoryTheory/Monoidal/Mon_.lean,Mathlib/CategoryTheory/Monoidal/NaturalTransformation.lean,Mathlib/CategoryTheory/Monoidal/Opposite.lean,Mathlib/CategoryTheory/Monoidal/Transport.lean,test/CategoryTheory/Coherence.lean |
15 |
38 |
['eric-wieser', 'github-actions', 'grunweg', 'jcommelin', 'kim-em', 'yuma-mizuno'] |
nobody |
721-23673 1 year ago |
859-76347 859 days ago |
60-84345 60 days |
| 6328 |
astrainfinita author:astrainfinita |
chore: make some instance about `Sub...Class` lower priority |
Many similar instances have been marked as lower priority. I'd like to see if this would make things faster.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-algebra
awaiting-CI
label:t-algebra$ |
14/14 |
Mathlib/RingTheory/NonUnitalSubsemiring/Basic.lean,Mathlib/RingTheory/Subsemiring/Basic.lean,lean-toolchain |
3 |
1 |
['digama0'] |
nobody |
721-23673 1 year ago |
unknown |
0-0 0 seconds |
| 6330 |
astrainfinita author:astrainfinita |
chore: make some instance about `Sub...Class` higher priority than `Sub...` |
The opposite direction to #6328.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-algebra
slow-typeclass-synthesis
label:t-algebra$ |
123/128 |
Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Star/NonUnitalSubalgebra.lean,Mathlib/FieldTheory/IsAlgClosed/Basic.lean,Mathlib/FieldTheory/Subfield.lean,Mathlib/RingTheory/NonUnitalSubring/Basic.lean,Mathlib/RingTheory/NonUnitalSubsemiring/Basic.lean,Mathlib/RingTheory/Polynomial/Quotient.lean,Mathlib/RingTheory/Subring/Basic.lean,Mathlib/RingTheory/Subsemiring/Basic.lean,lean-toolchain |
11 |
13 |
['astrainfinita', 'digama0', 'leanprover-bot'] |
nobody |
721-23673 1 year ago |
unknown |
0-0 0 seconds |
| 6491 |
eric-wieser author:eric-wieser |
chore(Mathlib/Algebra/Hom/GroupAction): add `SMulHomClass.comp_smul` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
24/10 |
Mathlib/Algebra/Hom/GroupAction.lean |
1 |
0 |
[] |
nobody |
721-23673 1 year ago |
993-9673 993 days ago |
83-76369 83 days |
| 7076 |
grunweg author:grunweg |
feat: define measure zero subsets of a manifold |
A topological manifold has no canonical measure, but there is a canonical notion of measure zero subsets.
We show that these are closed under subsets and countable unions (hence define a filter, the almost everywhere filter)
and that a closed nowhere dense has empty interior.
This is necessary for stating the general version of Sard's theorem (in finite dimensions), and a first step towards its proof.
This code was written at LftCM 2023. Thanks for @fpvandoorn for mentoring me! :heart:
---
Unresolved questions/looking for feedback
- Is "measure zero" a good name or would "null set" be better? I tend towards the former, but welcome input from a measure theorist (which I'm not).
- What is the correct definition? One could also define "measure zero" using any `IsOpenPosMeasure` on the charted space.
I think all results in this file still hold then, but for applications (e.g., Sard's theorem), this might be too general.
- define custom notation, similar to the a.e. filter on a measure space? (We could include $J$ instead of $\mu$.)
- what's the right syntax for formulas in docstrings --- use LaTeX or backticks? I don't know how to preview the generated docs, the guidelines are a bit ambiguous for me.
|
merge-conflict
WIP
t-differential-geometry
t-measure-probability
|
165/0 |
Mathlib.lean,Mathlib/Geometry/Manifold/MeasureZero.lean,docs/references.bib |
3 |
27 |
['ADedecker', 'github-actions', 'grunweg', 'mo271', 'sgouezel'] |
ADedecker assignee:ADedecker |
721-23673 1 year ago |
876-20982 876 days ago |
43-56110 43 days |
| 3757 |
thorimur author:thorimur |
feat: config options for `fail_if_no_progress` |
This PR creates config options for `fail_if_no_progress` that allow the user to tweak what exactly counts as "progress". This includes whether to use defeq or `BEq`, what transparency to use, and which parts of the goal and local context to check.
It also splits off the comparison functionality into `Mathlib.Lean.Meta.Compare`, which provides fully configurable comparison functions for common complex metaprogramming types not specific to `fail_if_no_progress`. These types are `Expr`, `LocalDecl`, `LocalContext`, `MetavarDecl`, `MVarId`, and `List MVarId`.
---
See [zulip](https://leanprover.zulipchat.com/#narrow/stream/287929-mathlib4/topic/progress.20on.20fail_if_no_progress) for a couple review questions.
Status update: this PR is now basically done, save for some extra tests which should probably be included.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-meta
|
603/54 |
Mathlib.lean,Mathlib/Lean/Meta.lean,Mathlib/Lean/Meta/Compare.lean,Mathlib/Tactic/FailIfNoProgress.lean,test/fail_if_no_progress.lean |
5 |
38 |
['alexjbest', 'github-actions', 'joneugster', 'kim-em', 'thorimur'] |
nobody |
721-23672 1 year ago |
1177-74754 1177 days ago |
0-15 15 seconds |
| 12353 |
thorimur author:thorimur |
feat: `conv%` |
This PR introduces `conv% e => tac`, along with `simp%`, `norm_num%`, and `push_neg%`, which are defined in terms of `conv%`.
It also introduces `conv%?` (and `simp%?`, `norm_num%?`, and `push_neg%?`) as shortcuts for `show_term ...`.
This is a relatively straightforward refactor of code already present in the implementation of `#conv`, and otherwise relies entirely on simple macros.
This PR also introduces some modifications to existing command syntax for `#conv`, `#simp`, and `#norm_num`:
* The syntax for `#conv` was `#conv tac => e`; however, this is inconsistent with the tactic syntax, and so this has been flipped to `#conv e => tac`. Likewise, `conv%` uses the same (new) syntax `conv% e => tac`.
* `#simp` and `#norm_num` separated their config and `only` syntax from the expression by an optional `=>` (for `#simp`) and an optional `:` (for `#norm_num`) (e.g. `#simp only [lem] => e`). These have both been replaced with an optional`on` (e.g. `#simp only [lem] on e`) which is also used for `simp%` and `norm_num%`.
Although `#whnf` is implemented in terms of `#conv`, this PR doesn't introduce `whnf%` in the same way, as that's probably better off being implemented directly instead of through `conv`.
---
WIP: needs tests.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-meta
|
131/32 |
Mathlib/Tactic/Conv.lean,Mathlib/Tactic/NormNum/Core.lean,Mathlib/Tactic/PushNeg.lean,docs/Conv/Guide.lean |
4 |
0 |
[] |
nobody |
716-86382 1 year ago |
820-38024 820 days ago |
0-17 17 seconds |
| 13852 |
astrainfinita author:astrainfinita |
perf: skip some typeclasses in TC search |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #7873
[](https://gitpod.io/from-referrer/)
|
merge-conflict
slow-typeclass-synthesis
blocked-by-other-PR
|
45/33 |
Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Ring/Defs.lean,Mathlib/RingTheory/Norm.lean |
3 |
21 |
['MichaelStollBayreuth', 'astrainfinita', 'github-actions', 'leanprover-bot'] |
nobody |
716-80062 1 year ago |
unknown |
0-0 0 seconds |
| 7903 |
urkud author:urkud |
feat: define `UnboundedSpace` |
---
The new instances generate some timeouts, and I don't understand why.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
help-wanted
t-topology
|
111/59 |
Mathlib/Analysis/BoxIntegral/Basic.lean,Mathlib/Analysis/Normed/Module/Basic.lean,Mathlib/Topology/Bornology/Basic.lean,Mathlib/Topology/Bornology/Constructions.lean,Mathlib/Topology/MetricSpace/Bounded.lean,Mathlib/Topology/MetricSpace/GromovHausdorffRealized.lean |
6 |
1 |
['github-actions'] |
nobody |
714-11651 1 year ago |
unknown |
0-0 0 seconds |
| 15679 |
adomani author:adomani |
test: refactor in CI |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
|
213/5 |
.github/workflows/bors.yml,.github/workflows/build.yml,.github/workflows/build.yml.in,.github/workflows/build_fork.yml,Mathlib.lean,Mathlib/Algebra/Homology/HomotopyCategory/SingleFunctors.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Affine.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Order.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Unique.lean,Mathlib/Analysis/Convex/Combination.lean,Mathlib/Analysis/Convex/Segment.lean,Mathlib/CategoryTheory/Bicategory/Adjunction.lean,Mathlib/CategoryTheory/Monoidal/Braided/Basic.lean,Mathlib/CategoryTheory/Monoidal/Center.lean,Mathlib/GroupTheory/Coxeter/Matrix.lean,Mathlib/Order/Filter/Cocardinal.lean,Mathlib/Order/UpperLower/Basic.lean,Mathlib/TestRefactor.lean,Refactor/Main.lean,lakefile.lean,lean-toolchain |
21 |
1 |
['github-actions'] |
nobody |
708-67227 1 year ago |
710-76669 710 days ago |
0-8 8 seconds |
| 7565 |
shuxuezhuyi author:shuxuezhuyi |
feat(Topology/Algebra/Order): extend homeomorphism of `Ioo` to `Icc` |
We extend the homeomorphisms between open intervals to homeomorphisms between the closed intervals.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #7018
- [ ] depends on: #7351
- [ ] depends on: #7564
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
blocked-by-other-PR
t-order
|
389/5 |
Mathlib.lean,Mathlib/Data/Set/Intervals/Image.lean,Mathlib/Order/Directed.lean,Mathlib/Topology/Algebra/Order/IccExtendFromIoo.lean,Mathlib/Topology/Algebra/Order/IntermediateValue.lean |
5 |
1 |
[] |
nobody |
707-17327 1 year ago |
1018-84606 1018 days ago |
0-222 3 minutes |
| 10629 |
madvorak author:madvorak |
feat: List.cons_sublist_append_iff_right |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-data
|
11/0 |
Mathlib/Data/List/Basic.lean |
1 |
1 |
['eric-wieser'] |
nobody |
707-17218 1 year ago |
833-26055 833 days ago |
53-73442 53 days |
| 9973 |
Ruben-VandeVelde author:Ruben-VandeVelde |
feat: polynomials formed by lists |
From https://github.com/leanprover-community/mathlib/pull/15476
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
please-adopt
merge-conflict
t-data
|
311/0 |
Mathlib.lean,Mathlib/Data/Polynomial/OfList.lean |
2 |
0 |
[] |
nobody |
707-16751 1 year ago |
unknown |
0-0 0 seconds |
| 12926 |
joelriou author:joelriou |
feat(CategoryTheory): the monoidal category structure induced by a monoidal functor |
In this PR, given a monoidal functor `F : MonoidalFunctor C D`, we define a monoidal category structure on the category `InducedCategory D F.obj`, which has the "same" objects as `C`, but the morphisms between `X` and `Y` identify to `F.obj X ⟶ F.obj Y`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-category-theory
|
105/0 |
Mathlib.lean,Mathlib/CategoryTheory/Monoidal/Induced.lean |
2 |
3 |
['eric-wieser', 'github-actions', 'joelriou'] |
nobody |
707-15150 1 year ago |
798-20355 798 days ago |
0-10 10 seconds |
| 12869 |
adomani author:adomani |
feat: linter and script for `theorem` vs `lemma` |
This PR contains a linter for flagging doc-string-less `theorem`s, as well as a bash script that, once the linter ran on Mathlib, automatically replaces every linter-offending `theorem` by `lemma`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-linter
awaiting-author
|
106/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Linter/ThmLemma.lean,scripts/thmLemma.sh |
4 |
13 |
['adomani', 'github-actions', 'grunweg', 'joneugster'] |
nobody |
707-1914 1 year ago |
761-22409 761 days ago |
38-16364 38 days |
| 14563 |
awueth author:awueth |
feat: if-then-else of exclusive or statement |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks, and is labeled with `awaiting-review`.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
If `¬(P ∧ Q)` then `ite (P ∨ Q) a 1 = (ite P a 1) * (ite Q a 1)`
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-algebra
new-contributor
label:t-algebra$ |
5/0 |
Mathlib/Algebra/Group/Basic.lean |
1 |
3 |
['eric-wieser', 'github-actions', 'kim-em'] |
nobody |
706-16066 1 year ago |
736-63048 736 days ago |
6-38745 6 days |
| 14308 |
grhkm21 author:grhkm21 |
feat(Algebra/Category): Direct construction of colimits in algebraic categories |
(Below I only write about colimits since that's what I'm familiar with after working on it the last few days, but maybe it's the same for other categorical constructions)
**Main feature:** Construct colimits in `AddCommGrp`/`ModuleCat`/`FGModuleCat`(/...) directly as coequalizer (i.e. cokernel i.e. quotient) of two maps, allowing one to say $\coprod_j M_j \cong *$
Currently, if you look at how colimits are constructed for [AddCommGrp](https://github.com/leanprover-community/mathlib4/blob/master/Mathlib/Algebra/Category/Grp/Colimits.lean#L69-L92), you see this massive block of code of all relations generating the quotient relation, but that's kind of bad, you can't say anything concretely about it.
Also as noted in the TODOs of a few files:
```
TODO:
In fact, in `ModuleCat R` there is a much nicer model of colimits as quotients
of finitely supported functions, and we really should implement this as well.
```
I wrote it down [here](https://leanprover.zulipchat.com/#narrow/stream/287929-mathlib4/topic/Braided.20left.20rigid.20categories.20are.20right.20rigid/near/447490672), and **have formalised it** in a small file already [here](https://gist.github.com/grhkm21/5b2d938753c0ce0900d21c93a39e3b7d#file-addcommgrpcolimits-lean-L162-L163) (I also have a `ModuleCat` version, and proving existence of colimits in `FGModuleCat` from it).
Usually I will try to merge the file into Mathlib directly (preferably in one sitting), but I have been trying for a while now and been struggling. One issue is I am struggling to understand universes, which I asked [here](https://leanprover.zulipchat.com/#narrow/stream/113489-new-members/topic/Universe.20constraints!/near/448049266) along with many other places. A more concrete issue is that
- [ ] FGModuleCat (and `FullSubcategory` in general) requires morphism and objects to be on the same universe, whereas generally `Category.{v, u}` don't.
So that seems to limit what I can express, and maybe I have to fix it first.
Here are a few more TODOs just so I don't forget, probably done before the one above:
- [ ] Generalise `cokernelIsoQuotient` to other categories.
- [ ] Also prove `coproductIsoDirectSum`
- [ ] Also prove coequalizer (f + h) (g + h) ~ coequalizer f g ~ cokernel (f - g) 0
- [ ] Fix typo `FGModuleCatCat`
If anyone is familiar with universe stuff and can answer my many questions that'll be great too. I need help understanding just [these five lines](https://github.com/leanprover-community/mathlib4/blob/master/Mathlib/Algebra/Category/Grp/Colimits.lean#L267-L271) |
merge-conflict
WIP
t-algebra
label:t-algebra$ |
10/3 |
Mathlib/Algebra/DirectSum/Module.lean,Mathlib/LinearAlgebra/FreeModule/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
706-13935 1 year ago |
751-48612 751 days ago |
0-23 23 seconds |
| 13010 |
ADedecker author:ADedecker |
feat: relax universe constraint in stoneCechExtend |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
|
33/3 |
Mathlib/Topology/StoneCech.lean |
1 |
2 |
['ADedecker', 'erdOne'] |
nobody |
706-13732 1 year ago |
unknown |
0-0 0 seconds |
| 12411 |
adomani author:adomani |
feat: more linting of cdots |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-linter
|
953/617 |
Archive/Wiedijk100Theorems/CubingACube.lean,Mathlib.lean,Mathlib/Algebra/Category/GroupCat/Colimits.lean,Mathlib/Algebra/Homology/Exact.lean,Mathlib/Algebra/Homology/LocalCohomology.lean,Mathlib/Algebra/Lie/Nilpotent.lean,Mathlib/Algebra/Module/PID.lean,Mathlib/Algebra/Module/Submodule/Bilinear.lean,Mathlib/Algebra/Module/Torsion.lean,Mathlib/Algebra/MonoidAlgebra/Basic.lean,Mathlib/Algebra/Order/Archimedean.lean,Mathlib/AlgebraicGeometry/StructureSheaf.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Calculus/Deriv/Slope.lean,Mathlib/Analysis/Calculus/InverseFunctionTheorem/ApproximatesLinearOn.lean,Mathlib/Analysis/Calculus/LocalExtr/Basic.lean,Mathlib/Analysis/Calculus/TangentCone.lean,Mathlib/Analysis/InnerProductSpace/Basic.lean,Mathlib/Analysis/InnerProductSpace/Projection.lean,Mathlib/Analysis/MeanInequalitiesPow.lean,Mathlib/Analysis/Normed/Group/ControlledClosure.lean,Mathlib/Analysis/Normed/Group/Pointwise.lean,Mathlib/Analysis/NormedSpace/FiniteDimension.lean,Mathlib/Analysis/NormedSpace/HahnBanach/Separation.lean,Mathlib/Analysis/NormedSpace/Multilinear/Basic.lean,Mathlib/Analysis/NormedSpace/Star/Basic.lean,Mathlib/Analysis/NormedSpace/Star/Multiplier.lean,Mathlib/Analysis/NormedSpace/lpSpace.lean,Mathlib/Analysis/PSeries.lean,Mathlib/Analysis/RCLike/Basic.lean,Mathlib/Analysis/SpecialFunctions/Complex/Arg.lean,Mathlib/Analysis/SpecialFunctions/Log/Base.lean,Mathlib/Analysis/SpecialFunctions/Log/Monotone.lean,Mathlib/Analysis/SpecialFunctions/Pow/NNReal.lean,Mathlib/Analysis/SpecialFunctions/Pow/Real.lean,Mathlib/Analysis/SpecificLimits/Normed.lean,Mathlib/CategoryTheory/Abelian/Basic.lean,Mathlib/CategoryTheory/Action.lean,Mathlib/CategoryTheory/Bicategory/NaturalTransformation.lean,Mathlib/CategoryTheory/Category/Cat/Limit.lean,Mathlib/CategoryTheory/Category/PartialFun.lean,Mathlib/CategoryTheory/Category/TwoP.lean,Mathlib/CategoryTheory/Closed/Cartesian.lean,Mathlib/CategoryTheory/Functor/Flat.lean,Mathlib/CategoryTheory/Galois/GaloisObjects.lean,Mathlib/CategoryTheory/Limits/Over.lean,Mathlib/CategoryTheory/Limits/VanKampen.lean,Mathlib/CategoryTheory/Localization/Predicate.lean,Mathlib/CategoryTheory/Monad/Coequalizer.lean,Mathlib/CategoryTheory/Monad/Monadicity.lean,Mathlib/CategoryTheory/Pi/Basic.lean,Mathlib/CategoryTheory/Sites/DenseSubsite.lean,Mathlib/CategoryTheory/Sites/InducedTopology.lean,Mathlib/CategoryTheory/Subobject/Lattice.lean,Mathlib/Combinatorics/Additive/PluenneckeRuzsa.lean,Mathlib/Combinatorics/HalesJewett.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Chunk.lean,Mathlib/Computability/Reduce.lean,Mathlib/Data/Holor.lean,Mathlib/Data/Nat/Multiplicity.lean,Mathlib/Data/Nat/Pairing.lean,Mathlib/Data/Real/Cardinality.lean,Mathlib/Data/Real/Hyperreal.lean,Mathlib/Data/Real/Irrational.lean,Mathlib/Data/Set/Card.lean,Mathlib/Dynamics/Circle/RotationNumber/TranslationNumber.lean,Mathlib/FieldTheory/Finite/Polynomial.lean,Mathlib/FieldTheory/Minpoly/IsIntegrallyClosed.lean,Mathlib/FieldTheory/PerfectClosure.lean,Mathlib/FieldTheory/RatFunc.lean,Mathlib/Geometry/RingedSpace/OpenImmersion.lean,Mathlib/Geometry/RingedSpace/PresheafedSpace/Gluing.lean,Mathlib/GroupTheory/GroupAction/Quotient.lean,Mathlib/GroupTheory/Nilpotent.lean,Mathlib/GroupTheory/Perm/Cycle/Factors.lean,Mathlib/GroupTheory/Perm/Finite.lean,Mathlib/GroupTheory/SpecificGroups/Quaternion.lean,Mathlib/GroupTheory/Sylow.lean,Mathlib/LinearAlgebra/Dimension/RankNullity.lean,Mathlib/LinearAlgebra/Dual.lean,Mathlib/LinearAlgebra/LinearIndependent.lean,Mathlib/LinearAlgebra/LinearPMap.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/Coeff.lean,Mathlib/LinearAlgebra/Prod.lean,Mathlib/LinearAlgebra/QuadraticForm/Complex.lean,Mathlib/LinearAlgebra/Reflection.lean,Mathlib/MeasureTheory/Constructions/Pi.lean,Mathlib/MeasureTheory/Covering/VitaliFamily.lean,Mathlib/MeasureTheory/Measure/Haar/Basic.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/Typeclasses.lean,Mathlib/MeasureTheory/OuterMeasure/Basic.lean,Mathlib/ModelTheory/Skolem.lean,Mathlib/NumberTheory/Dioph.lean,Mathlib/NumberTheory/LegendreSymbol/Basic.lean,Mathlib/NumberTheory/Padics/Hensel.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/NumberTheory/Padics/RingHoms.lean,Mathlib/NumberTheory/RamificationInertia.lean,Mathlib/RingTheory/AdjoinRoot.lean |
147 |
2 |
['adomani', 'leanprover-bot'] |
nobody |
706-13595 1 year ago |
unknown |
0-0 0 seconds |
| 12279 |
casavaca author:casavaca |
WIP: feat: Holder's inequality n-ary |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
<!-- This is https://artofproblemsolving.com/wiki/index.php/H%C3%B6lder%27s_Inequality -->
- [x] depends on #12291
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-analysis
|
129/0 |
Mathlib/Analysis/MeanInequalities.lean,Mathlib/Analysis/SpecialFunctions/Pow/Real.lean |
2 |
13 |
['github-actions'] |
nobody |
706-13580 1 year ago |
822-74685 822 days ago |
0-50185 13 hours |
| 12093 |
ADedecker author:ADedecker |
feat: tweak the definition of semicontinuity to behave better in nonlinear orders |
Summary of the changes:
- change definitions to make [lowerSemicontinuous_iff_isClosed_preimage](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Topology/Semicontinuous.html#lowerSemicontinuous_iff_isClosed_preimage) true without assuming `LinearOrder`, so that semicontinuity corresponds to continuity for lower/upper order topology on the codomain. See discussion on [Zulip](https://leanprover.zulipchat.com/#narrow/stream/116395-maths/topic/Semicontinuity.20definition.20for.20non-linear.20orders/near/432898278)
- add new `iff` lemmas for unfolding the definition
- add `iff` lemmas with the old definition in the linearly ordered case
- some basic lemmas need to be changed in an easy way
- minimize assumptions for continuity => semicontinuity
- prove the semicontinuity criterion for indicators using "preimage of Ici/Iic" instead of a direct proof, because the proof is more natural (especially because we have no `filter_upwards` for `Frequently`)
- in the rest of the file (which is about linear orders anyway), we don't touch the statements and just rewrite to the old definition. Some of these could be generalized, but we keep that for a later PR.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-topology
|
274/130 |
Mathlib/Analysis/BoundedVariation.lean,Mathlib/MeasureTheory/Integral/FundThmCalculus.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Topology/Semicontinuous.lean |
4 |
0 |
[] |
nobody |
706-13542 1 year ago |
unknown |
0-0 0 seconds |
| 11520 |
thorimur author:thorimur |
feat: `linting_rules` and deprecated syntax |
---
Experimental. WIP. Might not be performance-viable.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #11519
[](https://gitpod.io/from-referrer/)
|
merge-conflict
blocked-by-other-PR
t-meta
|
1016/0 |
Mathlib.lean,Mathlib/Command/Linter.lean,Mathlib/Command/Linter/Deprecated.lean,Mathlib/Command/Linter/LintingRules.lean,Mathlib/Command/SyntaxRules.lean,Mathlib/Command/SyntaxRules/Attr.lean,Mathlib/Command/SyntaxRules/Elab.lean,Mathlib/Command/SyntaxRules/Header.lean,Mathlib/Command/SyntaxRules/Util.lean,Mathlib/Tactic/Common.lean,scripts/noshake.json |
11 |
11 |
['leanprover-bot', 'thorimur'] |
nobody |
706-13532 1 year ago |
unknown |
0-0 0 seconds |
| 11519 |
thorimur author:thorimur |
feat: `syntax_rules` |
---
Experimental. WIP.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
|
485/0 |
Mathlib.lean,Mathlib/Command/SyntaxRules.lean,Mathlib/Command/SyntaxRules/Attr.lean,Mathlib/Command/SyntaxRules/Elab.lean,Mathlib/Command/SyntaxRules/Header.lean,Mathlib/Command/SyntaxRules/Util.lean,scripts/noshake.json |
7 |
0 |
[] |
nobody |
706-13518 1 year ago |
unknown |
0-0 0 seconds |
| 11393 |
mcdoll author:mcdoll |
feat(Analysis/Distribution/SchwartzSpace): The Heine-Borel property |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
t-analysis
|
688/3 |
Mathlib.lean,Mathlib/Analysis/Distribution/SchwartzSpace.lean,Mathlib/Topology/Constructions.lean,Mathlib/Topology/UniformSpace/Ascoli.lean,Mathlib/Topology/UniformSpace/Pi.lean,Mathlib/Topology/UniformSpace/UniformConvergenceTopology.lean |
6 |
0 |
[] |
nobody |
706-13508 1 year ago |
unknown |
0-0 0 seconds |
| 9444 |
erdOne author:erdOne |
feat: Various instances regarding `𝓞 K`. |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
help-wanted
t-number-theory
|
27/0 |
Mathlib/NumberTheory/NumberField/Basic.lean,Mathlib/RingTheory/IntegralClosure.lean |
2 |
9 |
['erdOne', 'leanprover-bot', 'mattrobball', 'riccardobrasca', 'xroblot'] |
nobody |
706-13427 1 year ago |
928-12854 928 days ago |
1-62292 1 day |
| 8931 |
hmonroe author:hmonroe |
feat(Computable): define P, NP, and NP-complete |
Revised to focus on languages that are binary strings, given the issue of non-acceptable encodings of unspecified Types
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
awaiting-author
|
381/5 |
Mathlib.lean,Mathlib/Computability/Complexity copy.lean,Mathlib/Computability/Complexity.lean,Mathlib/Computability/Encoding.lean,Mathlib/Computability/TMComputable.lean,Mathlib/Computability/TuringMachine.lean,Mathlib/Computability/halting example.lean,docs/references.bib |
8 |
3 |
['fpvandoorn', 'github-actions', 'hmonroe'] |
nobody |
706-13392 1 year ago |
862-22774 862 days ago |
93-64275 93 days |
| 10641 |
newell author:newell |
feat(Topology/MetricSpace/WellSpaced): Define sets that are *well-spaced*. |
Create a new file `Mathlib.Topology.MetricSpace.WellSpaced` that contains definitions of sets which are in some sense *well-spaced*.
Some examples are Delone and Meyer sets, which find applications in Quasicrystals and Coding Theory, among others.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-topology
|
1073/14 |
Mathlib.lean,Mathlib/Analysis/LocallyConvex/WithSeminorms.lean,Mathlib/Topology/EMetricSpace/Basic.lean,Mathlib/Topology/GMetric/Basic.lean,Mathlib/Topology/GMetric/GInfSep.lean,Mathlib/Topology/GMetric/WellSpaced.lean,Mathlib/Topology/GPseudoMetric/Basic.lean,Mathlib/Topology/MetricSpace/WellSpaced.lean |
8 |
1 |
['edegeltje'] |
nobody |
706-13360 1 year ago |
unknown |
0-0 0 seconds |
| 10387 |
adomani author:adomani |
feat(Tactic/ComputeDegree): add `polynomial` tactic |
Introducing the `polynomial` tactic, summing up `compute_degree, monicity` and adding support for `leadingCoeff`.
This is more of a proof of concept: if there is interest in this tactic, I can polish it up.
See [this Zulip discussion](https://leanprover.zulipchat.com/#narrow/stream/113489-new-members/topic/Compute.20roots.20of.20polynomials/near/420713624).
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
WIP
RFC
t-meta
|
24/0 |
Mathlib/Tactic/ComputeDegree.lean |
1 |
0 |
[] |
nobody |
706-13214 1 year ago |
749-82644 749 days ago |
143-73801 143 days |
| 9154 |
astrainfinita author:astrainfinita |
feat: `npow` / `nsmul` / `Nat.cast`/ `zpow` / `zsmul` implemented using `Nat.binaryRec` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: https://github.com/leanprover/lean4/pull/3756
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
blocked-by-other-PR
label:t-algebra$ |
168/359 |
Mathlib/Algebra/Group/Defs.lean,Mathlib/Computability/PartrecCode.lean,Mathlib/Computability/Primrec.lean,Mathlib/Data/Bool/Basic.lean,Mathlib/Data/Int/Bitwise.lean,Mathlib/Data/Nat/Bits.lean,Mathlib/Data/Nat/Bitwise.lean,Mathlib/Data/Nat/Digits.lean,Mathlib/Data/Nat/EvenOddRec.lean,Mathlib/Data/Nat/Fib/Basic.lean,Mathlib/Data/Nat/Multiplicity.lean,Mathlib/Data/Nat/Order/Basic.lean,Mathlib/Data/Nat/Parity.lean,Mathlib/Data/Nat/Size.lean,Mathlib/Data/Num/Lemmas.lean,Mathlib/Init/Data/Nat/Bitwise.lean,Mathlib/LinearAlgebra/TensorProduct/Graded/Internal.lean,Mathlib/Logic/Basic.lean,Mathlib/Logic/Denumerable.lean,Mathlib/Logic/Encodable/Basic.lean,Mathlib/Logic/Equiv/Basic.lean,Mathlib/Logic/Equiv/Nat.lean,lake-manifest.json,lakefile.lean,test/zmod.lean |
25 |
7 |
['astrainfinita', 'eric-wieser', 'kim-em'] |
nobody |
706-13005 1 year ago |
unknown |
0-0 0 seconds |
| 6603 |
tydeu author:tydeu |
feat: automatically try `cache get` before build |
---
A quick proof-of-concept. With this, `lake build` will always try `cache get` before building mathlib.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
WIP
CI
|
29/0 |
lakefile.lean |
1 |
3 |
['kim-em', 'tydeu'] |
nobody |
706-12979 1 year ago |
1060-29502 1060 days ago |
11-2031 11 days |
| 6058 |
apurvnakade author:apurvnakade |
feat: duality theory for cone programs |
This PR tracks the development of duality theory for cone programs.
[Reference](https://ti.inf.ethz.ch/ew/courses/ApproxSDP09/notes/conelp.pdf)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [x] depends on: #6059
- [ ] define direct sum of cones
- [ ] weak duality
- [ ] regular duality
- [ ] slater condition
- [ ] strong duality |
merge-conflict
WIP
t-analysis
|
159/0 |
Mathlib.lean,Mathlib/Analysis/Convex/Cone/ConeLinearProgram.lean |
2 |
1 |
[] |
nobody |
706-12924 1 year ago |
1095-49832 1095 days ago |
0-9 9 seconds |
| 6449 |
ADedecker author:ADedecker |
feat: functions with finite fibers |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This has been discussed before on [Zulip](https://leanprover.zulipchat.com/#narrow/stream/217875-Is-there-code-for-X.3F/topic/.E2.9C.94.20Cofinite.20maps.3F) and it came up again while working with @kkytola's student. As explained in the docstring, we could absolutely just use `Tendsto f cofinite cofinite` all the time, but (1) we lack some API for it (2) the API is nicer to setup if we have a separate def (e.g for dot notation) and (3) mentioning filters for such a simple concept is really not beginner-friendly.
I'm not sure at all about the name.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-topology
|
203/0 |
Mathlib.lean,Mathlib/Logic/Function/HasFiniteFibers.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/Cofinite.lean |
4 |
14 |
['ADedecker', 'YaelDillies', 'alexjbest', 'kkytola'] |
nobody |
706-12918 1 year ago |
1072-10972 1072 days ago |
6-70040 6 days |
| 8100 |
digama0 author:digama0 |
feat: add support for other types in norm_num |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-meta
|
177/12 |
Mathlib/Tactic/NormNum/Basic.lean,Mathlib/Tactic/NormNum/Eq.lean,Mathlib/Tactic/NormNum/Ineq.lean,Mathlib/Tactic/NormNum/Pow.lean,Mathlib/Tactic/NormNum/Result.lean,Mathlib/Tactic/NormNum/Structural.lean,test/norm_num.lean |
7 |
4 |
['dwrensha'] |
nobody |
706-12786 1 year ago |
unknown |
0-0 0 seconds |
| 13163 |
erdOne author:erdOne |
feat(.vscode/module-docstring.code-snippet): Prevent auto-complete from firing on `do` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-author
t-meta
|
5/0 |
.vscode/module-docstring.code-snippets |
1 |
5 |
['erdOne', 'grunweg', 'robertylewis', 'trivial1711'] |
nobody |
706-11528 1 year ago |
738-25720 738 days ago |
50-78405 50 days |
| 15585 |
astrainfinita author:astrainfinita |
test make `HasQuotient.quotient'` reducible |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
8/1 |
Mathlib/Algebra/Quotient.lean,Mathlib/GroupTheory/Coset.lean |
2 |
1 |
['github-actions'] |
nobody |
704-45194 1 year ago |
unknown |
0-0 0 seconds |
| 15586 |
astrainfinita author:astrainfinita |
test make `HasQuotient` out put a `setoid` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
22/36 |
Mathlib/Algebra/Lie/CartanExists.lean,Mathlib/Algebra/Lie/Quotient.lean,Mathlib/Algebra/Lie/Weights/Basic.lean,Mathlib/Algebra/Quotient.lean,Mathlib/Analysis/Normed/Group/AddCircle.lean,Mathlib/GroupTheory/Commensurable.lean,Mathlib/GroupTheory/Coset.lean,Mathlib/GroupTheory/CosetCover.lean,Mathlib/GroupTheory/GroupAction/Quotient.lean,Mathlib/GroupTheory/Nilpotent.lean,Mathlib/GroupTheory/QuotientGroup.lean,Mathlib/LinearAlgebra/Quotient.lean,Mathlib/RingTheory/Ideal/Quotient.lean,Mathlib/Topology/Algebra/UniformRing.lean |
14 |
5 |
['astrainfinita', 'github-actions', 'leanprover-bot'] |
nobody |
704-45194 1 year ago |
unknown |
0-0 0 seconds |
| 13791 |
digama0 author:digama0 |
refactor: Primrec and Partrec |
General cleanup of the `Primrec` and `Partrec` files, to better adjust to lean 4 things. The main user-visible change is that `Primrec₂` is no longer a `def` but an `abbrev`, because it was causing inference issues in lean 4. I also removed all the nonterminal `simp`s in `PartrecCode.lean`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
tech debt
|
585/778 |
Mathlib/Computability/Ackermann.lean,Mathlib/Computability/Halting.lean,Mathlib/Computability/Partrec.lean,Mathlib/Computability/PartrecCode.lean,Mathlib/Computability/Primrec.lean |
5 |
2 |
['github-actions', 'grunweg'] |
nobody |
702-66463 1 year ago |
766-56049 766 days ago |
1-84718 1 day |
| 12418 |
rosborn author:rosborn |
style: replace preimage_val with ↓∩ notation |
---
This is a rough draft of what the new `↓∩` notation would look like within mathlib. I believe this is an improvement in clarity and would like to have `↓∩` as a standard notation (along with `''`, `⁻¹'`, `↑`, etc...). As `↓∩` is specialized for `Set`s, I have only changed `preimage_val` when the left-hand side of `↓∩` is a `Set`.
The introduction of the `↓∩` notation to Data.Set.Image is temporary as it isn't possible to import Data.Set.Subset directly. If we want `↓∩` unscoped, where would be the best place to define it? An option is Data.Set.Defs, but the notation cannot be defined without additional imports as the file does not import `notation3`.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict |
56/61 |
Mathlib/Analysis/InnerProductSpace/Projection.lean,Mathlib/Data/Set/Function.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/Set/Subset.lean,Mathlib/MeasureTheory/Constructions/Polish.lean,Mathlib/MeasureTheory/MeasurableSpace/Basic.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/Order/UpperLower/Basic.lean,Mathlib/Topology/Bases.lean,Mathlib/Topology/Clopen.lean,Mathlib/Topology/Connected/Basic.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/Constructions.lean,Mathlib/Topology/ContinuousOn.lean,Mathlib/Topology/LocalAtTarget.lean,Mathlib/Topology/LocallyConstant/Basic.lean,Mathlib/Topology/Separation.lean,Mathlib/Topology/Sober.lean |
18 |
3 |
['grunweg', 'rosborn'] |
nobody |
702-66221 1 year ago |
788-76205 788 days ago |
29-50022 29 days |
| 9978 |
astrainfinita author:astrainfinita |
chore(FieldTheory/KummerExtension): move some lemmas earlier |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
awaiting-author
t-algebra
label:t-algebra$ |
197/177 |
Mathlib.lean,Mathlib/Data/Polynomial/FieldDivision.lean,Mathlib/FieldTheory/KummerExtension.lean,Mathlib/RingTheory/AdjoinRoot.lean,Mathlib/RingTheory/Polynomial/Irreducible.lean |
5 |
5 |
['alreadydone', 'grunweg', 'riccardobrasca'] |
nobody |
702-66013 1 year ago |
900-60195 900 days ago |
8-83342 8 days |
| 12429 |
adomani author:adomani |
feat: toND -- auto-generating natDegree |
This is an experiment to automatically translate theorems about `degree` to theorems about `natDegree`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
RFC
merge-conflict
awaiting-author
t-meta
label:t-algebra$ |
167/132 |
Mathlib.lean,Mathlib/Algebra/Polynomial/Degree/Definitions.lean,Mathlib/Algebra/Polynomial/Degree/Lemmas.lean,Mathlib/Algebra/Polynomial/EraseLead.lean,Mathlib/Algebra/Polynomial/HasseDeriv.lean,Mathlib/Algebra/Polynomial/Inductions.lean,Mathlib/Algebra/Polynomial/Mirror.lean,Mathlib/Algebra/Polynomial/Reverse.lean,Mathlib/Tactic.lean,Mathlib/Tactic/ToNatDegree.lean,scripts/noshake.json |
11 |
2 |
['adomani', 'grunweg'] |
nobody |
702-65324 1 year ago |
814-12997 814 days ago |
3-76602 3 days |
| 15823 |
eric-wieser author:eric-wieser |
Quotients of rings in model theory |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-logic
|
55/13 |
Mathlib/ModelTheory/Algebra/Ring/FreeCommRing.lean,Mathlib/ModelTheory/Syntax.lean |
2 |
1 |
['github-actions'] |
nobody |
702-43887 1 year ago |
unknown |
0-0 0 seconds |
| 12178 |
joneugster author:joneugster |
feat(Data/Matrix/Basic): add notation for `m×n`-Matrices |
Introduce the notation `Mat[m,n][R]` for `Matrix (Fin m) (Fin n) R`.
[Zulip thread](https://leanprover.zulipchat.com/#narrow/stream/287929-mathlib4/topic/Why.20does.20.60Matrix.2Erow.60.20use.20.20.60Unit.60.20instead.20of.20.60Fin.201.60.3F/near/427949223)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
label:t-algebra$ |
139/135 |
Mathlib/Algebra/Lie/CartanMatrix.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Basic.lean,Mathlib/Data/Matrix/Basic.lean,Mathlib/Data/Matrix/Notation.lean,Mathlib/Data/Matrix/Rank.lean,Mathlib/Data/Matrix/Reflection.lean,Mathlib/GroupTheory/Coxeter/Matrix.lean,Mathlib/LinearAlgebra/Matrix/Adjugate.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/Coeff.lean,Mathlib/LinearAlgebra/Matrix/Determinant.lean,Mathlib/LinearAlgebra/Matrix/SpecialLinearGroup.lean,Mathlib/LinearAlgebra/Matrix/Trace.lean,Mathlib/LinearAlgebra/Matrix/Transvection.lean,Mathlib/LinearAlgebra/PID.lean,Mathlib/LinearAlgebra/Vandermonde.lean,Mathlib/NumberTheory/Modular.lean,Mathlib/NumberTheory/ModularForms/CongruenceSubgroups.lean,Mathlib/NumberTheory/ModularForms/SlashActions.lean,Mathlib/NumberTheory/ModularForms/SlashInvariantForms.lean,Mathlib/NumberTheory/RamificationInertia.lean,Mathlib/RingTheory/SimpleModule.lean,test/matrix.lean |
22 |
9 |
['YaelDillies', 'eric-wieser', 'grunweg', 'joneugster'] |
nobody |
702-21011 1 year ago |
821-11404 821 days ago |
5-76679 5 days |
| 12751 |
Command-Master author:Command-Master |
feat: add lemmas for Nat/Bits, Nat/Bitwise and Nat/Size |
Remove `@[simp]` from `Nat.bit_false` and `Nat.bit_true`, as `bit0` and `bit1` are deprecated, and add some lemmas to `Bits`, `Bitwise` and `Size`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends |