Are you a maintainer with just a short amount of time? The following kinds of pull requests could be relevant for you.
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Updated |
Last status change |
total time in review |
| 35753 |
Vilin97 author:Vilin97 |
feat(Topology/Algebra/Order): regular grid helpers and piecewise linear interpolation |
Make API for piecewise linear interpolation on regular grids. I need these to for ODE time-stepping methods, like forward Euler, and later Runge–Kutta methods.
Follow-up PR: #35755 (forward Euler method convergence).
I don't know if these numerical analysis ODE-solving methods even belong in mathlib. If someone could advise me on it, I would appreciate it.
---
The initial proof was produced by [Aristotle](https://aristotle.harmonic.fun). The code was iteratively refined (factoring out lemmas, golfing, simplifying proofs) using Claude Code.
- [ ] depends on: #38091 |
t-topology
new-contributor
LLM-generated
maintainer-merge
|
201/0 |
Mathlib.lean,Mathlib/Topology/Algebra/Order/PiecewiseLinear.lean |
2 |
59 |
['Vilin97', 'YanYablonovskiy', 'adomani', 'botbaki-review', 'copilot-pull-request-reviewer', 'dagurtomas', 'eric-wieser', 'github-actions', 'grunweg', 'j-loreaux', 'mathlib-dependent-issues', 'wwylele'] |
nobody |
52-59423 1 month ago |
85-70143 85 days ago |
118-32636 118 days |
| 40925 |
JovanGerb author:JovanGerb |
chore(CategoryTheory/Functor/Category): don't expose `NatTrans.hcomp` |
This PR hides the definition of `NatTrans.hcomp`, because it has two equally sensible possible definitions. As a result, we can get rid of the `to_dual_insert_cast`. `simps` doesn't work for non-exposed definition, so `hcomp_app` is proved separately, and its dual `hcomp_app'` is added.
Note: some proofs break, because the `dsimp` set changes, due to the definition not being exposed. This is a bit unfortunate. There was some discussion on Zulip about changing `dsimp` for category theory into a simp set, which would fix this problem, because we could then add `hcomp_app` to this set.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
maintainer-merge
tech debt
|
30/15 |
Mathlib/AlgebraicTopology/DoldKan/NCompGamma.lean,Mathlib/AlgebraicTopology/DoldKan/PInfty.lean,Mathlib/CategoryTheory/Functor/Category.lean,Mathlib/CategoryTheory/Monoidal/Action/End.lean,Mathlib/CategoryTheory/Monoidal/End.lean,Mathlib/CategoryTheory/Triangulated/TStructure/SpectralObject.lean,Mathlib/CategoryTheory/Types/Basic.lean |
7 |
11 |
['JovanGerb', 'github-actions', 'grunweg', 'leanprover-radar', 'riccardobrasca'] |
nobody |
22-17228 22 days ago |
33-15125 33 days ago |
33-15745 33 days |
| 38214 |
emlis42 author:emlis42 |
feat(Algebra/ContinuedFractions): add Euler's continued fraction |
This PR formalizes Euler continued fractions by providing `euler` which construct one by giving head term and coefficients with some basic property.
We also introduce a transformation `GenContFract.toEuler` that maps a generalized continued fraction `g : GenContFract K` to an equivalent Euler continued fraction. |
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
364/0 |
Mathlib.lean,Mathlib/Algebra/ContinuedFractions/Euler.lean |
2 |
74 |
['YaelDillies', 'emlis42', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
13-18405 13 days ago |
19-1739 19 days ago |
81-52035 81 days |
| 39607 |
TentativeConvert author:TentativeConvert |
feat(Algebra/DirectSum): equivalence between direct sum indexed by ι₁ and double sum indexed by ι₂ and fibres of f : ι₁ → ι₂ |
1. Add variant `equivCongrLeft'` of `equivCongrLeft`, and corresponding `…_apply` lemma.
2. Add `…_of lemmas` for both `equivCongrLeft` and `equivCongrLeft'`.
3. Add `…of lemma` for `sigmaCurry`, i.e. `sigmaCurry_of`.
4. Add `sigmaFiberAddEquiv`: the equivalence between a direct sum indexed by a type `ι₁` and the double sum indexed by a type `ι₂` and the fibres of a map `f : ι₁ → ι₂`. Add two `…_apply` lemmas and an `…_of` lemma.
---
This is supposed to be a first step towards merging the draft PR #39356.
re 1: Mathematically, I don't see why one version should be preferred over the other, but I found the existing `equivCongrLeft` more difficult to work with when the equivalence `h : ι ≃ κ` is naturally given in the opposite direction. (I could not avoid explicit type casts through the equality `h.symm.symm = h` when defining `sigmaFiberAddEquiv` in terms of `equivCongrLeft`.)
Very unsure about the name of `equivCongrLeft'`. (I see that the name `equivCongrLeft` was chosen in analogy with `Equiv.piCongrLeft`. `Equiv.piCongrRight` looks very different, so presumably `equivCongrLeft'` should *not* be called `equivCongrRight`.)
re 4: Very unsure about the naming of the two different `…_apply` lemmas; called them `…_apply` and `…_apply'` for now. The second (`…_apply'`) cannot be a `simp` lemma as it would prevent the first (`…_apply`) from firing.
I've used Claude Opus for understanding error messages and git interaction, but everything is hand coded.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
maintainer-merge
label:t-algebra$ |
46/3 |
Mathlib/Algebra/DirectSum/Basic.lean |
1 |
48 |
['TentativeConvert', 'eric-wieser', 'github-actions', 'joneugster', 'themathqueen'] |
joneugster assignee:joneugster |
12-7538 12 days ago |
12-9520 12 days ago |
66-18037 66 days |
| 41616 |
JX-Mo author:JX-Mo |
refactor(RepresentationTheory): move instance Abelian (Rep k G) to Rep.Basic |
This instance removes the commutativity assumption on k in the current instance Abelian (Rep k G) in Rep.Iso. |
t-algebra
new-contributor
maintainer-merge
label:t-algebra$ |
2/2 |
Mathlib/RepresentationTheory/Rep/Basic.lean,Mathlib/RepresentationTheory/Rep/Iso.lean |
2 |
4 |
['github-actions', 'grunweg'] |
nobody |
10-21227 10 days ago |
15-18842 15 days ago |
15-18655 15 days |
| 41656 |
joelriou author:joelriou |
feat(AlgebraicTopology): order relation between simplices of the nerve of a partial order |
This is applied to the characterization of the order relation between simplices of `Δ[p] ⊗ Δ[q]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
maintainer-merge
|
64/2 |
Mathlib/AlgebraicTopology/SimplicialSet/NerveNondegenerate.lean,Mathlib/AlgebraicTopology/SimplicialSet/ProdStdSimplex.lean,Mathlib/AlgebraicTopology/SimplicialSet/Subcomplex.lean |
3 |
6 |
['github-actions', 'joelriou', 'robin-carlier'] |
nobody |
10-18640 10 days ago |
10-19706 10 days ago |
13-34746 13 days |
| 41818 |
Vierkantor author:Vierkantor |
feat(Tactic/Linter): add linter for missing `@[tactic_alt]` tags |
This PR adds a `tacticAlt` linter that complains when there are two tactics with the same user-facing name (usually: the first token in their syntax) but they aren't marked as `@[tactic_alt]` to each other. Those situations lead to duplicate entries in doc-gen's tactic overview page.
You can see example output in the tests file, or in the [build log](https://github.com/leanprover-community/mathlib4/actions/runs/29502419244/job/87654684693).
The current simple implementation has one limitation: if multiple duplicates are all being linted at once, each of them gets a linter warning. I think this is okay, but we could be a bit stricter and only produce the warning on the tactic that comes later in the environment.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
maintainer-merge
|
75/0 |
Mathlib/Tactic/ApplyAt.lean,Mathlib/Tactic/ClearExcept.lean,Mathlib/Tactic/Linter/TacticDocumentation.lean,MathlibTest/Linter/TacticDoc.lean |
4 |
5 |
['JovanGerb', 'github-actions', 'leanprover-radar'] |
JovanGerb assignee:JovanGerb |
9-52687 9 days ago |
9-86325 9 days ago |
9-86150 9 days |
| 35349 |
RemyDegenne author:RemyDegenne |
feat: data processing inequality for the Kullback-Leibler divergence |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #34841
- [x] depends on: #35089
- [x] depends on: #27953
- [x] depends on: #39819
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
maintainer-merge
|
290/24 |
Mathlib.lean,Mathlib/Analysis/Convex/Continuous.lean,Mathlib/InformationTheory/KullbackLeibler/DataProcessing.lean,Mathlib/MeasureTheory/Measure/Decomposition/IntegralRNDeriv.lean |
4 |
16 |
['EtienneC30', 'RemyDegenne', 'VictorBoscaro', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
EtienneC30 assignee:EtienneC30 |
9-36101 9 days ago |
10-28810 10 days ago |
25-28855 25 days |
| 40392 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Integral/Lebesgue/Basic): fix an `erw` |
Extracted from #40348.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
tech debt
maintainer-merge
|
11/1 |
Mathlib/Data/ENNReal/Operations.lean,Mathlib/MeasureTheory/Integral/Lebesgue/Basic.lean |
2 |
5 |
['felixpernegger', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
9-15084 9 days ago |
9-17193 9 days ago |
40-27731 40 days |
| 41243 |
dependabot author:dependabot |
chore(deps): bump GrantBirki/comment from 3.0.0 to 3.0.3 in /.github/workflows in the actions-version-updates group across 1 directory |
Bumps the actions-version-updates group with 1 update in the /.github/workflows directory: [GrantBirki/comment](https://github.com/grantbirki/comment).
Updates `GrantBirki/comment` from 3.0.0 to 3.0.3
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/grantbirki/comment/releases">GrantBirki/comment's releases</a>.</em></p>
<blockquote>
<h2>v3.0.3</h2>
<h2>What's Changed</h2>
<ul>
<li>Add release bundle attestations by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/48">GrantBirki/comment#48</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.3">https://github.com/GrantBirki/comment/compare/v3...v3.0.3</a></p>
<h2>v3.0.2</h2>
<h2>What's Changed</h2>
<ul>
<li>Bump version to v3.0.2 by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/47">GrantBirki/comment#47</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.2">https://github.com/GrantBirki/comment/compare/v3...v3.0.2</a></p>
<h2>v3.0.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Add dependency cooldowns by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/37">GrantBirki/comment#37</a></li>
<li>Bump actions/upload-artifact from 6.0.0 to 7.0.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/38">GrantBirki/comment#38</a></li>
<li>Bump actions/upload-artifact from 7.0.0 to 7.0.1 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/39">GrantBirki/comment#39</a></li>
<li>Bump esbuild from 0.27.7 to 0.28.1 in the npm_and_yarn group across 1 directory by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/40">GrantBirki/comment#40</a></li>
<li>Fix template variable documentation by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/41">GrantBirki/comment#41</a></li>
<li>Reduce npm dependency surface by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/45">GrantBirki/comment#45</a></li>
<li>Add versioned release automation by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/46">GrantBirki/comment#46</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.1">https://github.com/GrantBirki/comment/compare/v3...v3.0.1</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/GrantBirki/comment/commit/937820f3623fd0e300294bcc64ac7577fc0ad4cc"><code>937820f</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/48">#48</a> from GrantBirki/add-release-attestations</li>
<li><a href="https://github.com/GrantBirki/comment/commit/56617234d3c8c5bcb92b2ac851cc4925e3034254"><code>5661723</code></a> Bump version to v3.0.3</li>
<li><a href="https://github.com/GrantBirki/comment/commit/245ea8def6a8b8cd42098a154250be7098f4c97f"><code>245ea8d</code></a> Add release bundle attestations</li>
<li><a href="https://github.com/GrantBirki/comment/commit/93a7ff5a297b609ea35b67866cc3459676d2aba1"><code>93a7ff5</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/47">#47</a> from GrantBirki/bump-v3.0.2</li>
<li><a href="https://github.com/GrantBirki/comment/commit/44e0f6fce3957b6ba32ea1b28c2885c288723f4b"><code>44e0f6f</code></a> Bump version to v3.0.2</li>
<li><a href="https://github.com/GrantBirki/comment/commit/b23dd77391cf0a2538e898a73169eac9c1a6a6ff"><code>b23dd77</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/46">#46</a> from GrantBirki/versioned-auto-release</li>
<li><a href="https://github.com/GrantBirki/comment/commit/53e38fc3816c5a0ab34974efe7e26772fa504e39"><code>53e38fc</code></a> Make release workflow reruns resumable</li>
<li><a href="https://github.com/GrantBirki/comment/commit/b95b12a9f0e8d416e4dee45b1247c2ffa0d80f6b"><code>b95b12a</code></a> Disable persisted checkout credentials</li>
<li><a href="https://github.com/GrantBirki/comment/commit/a56acd4048fa2bfef519dbbc7b9f91cfceca3818"><code>a56acd4</code></a> Remove release workflow npm cache</li>
<li><a href="https://github.com/GrantBirki/comment/commit/f802ba8fc0cb98597304197afcbb85edd6d438a7"><code>f802ba8</code></a> Rename action version export</li>
<li>Additional commits viewable in <a href="https://github.com/grantbirki/comment/compare/3439715f0cf3b8fc29bf47be0e3226679c06c41a...937820f3623fd0e300294bcc64ac7577fc0ad4cc">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions
</details> |
dependencies
github_actions
CI
maintainer-merge
|
2/2 |
.github/workflows/build_template.yml,.github/workflows/maintainer_merge_wf_run.yml |
2 |
3 |
['github-actions', 'joneugster'] |
nobody |
9-14870 9 days ago |
25-12848 25 days ago |
25-12661 25 days |
| 41498 |
pepamontero author:pepamontero |
feat(Analysis/SpecificLimits/Normed): the sum ∑' n, n ^ k * r ^ n via Stirling numbers |
For `‖r‖ < 1`, compute `∑' n : ℕ, n ^ k * r ^ n` as the finite sum `∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j / (1 - r) ^ (j + 1)`, where `S(k, j)` are the Stirling numbers of the second kind.
**Motivation:** a special case of `tsum_sq_mul_geometric_of_norm_lt_one` over `ℂ` was proved in the FLT project and is generalized here to match the surrounding Mathlib API; the private FLT lemma can then be replaced by this one.
**Main additions to `Normed.lean`:**
- The general power formula:
- `hasSum_pow_mul_geometric_of_norm_lt_one'` / `tsum_pow_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n ^ k * r ^ n = ∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_pow_mul_geometric_of_norm_lt_one` / `tsum_pow_mul_geometric_of_norm_lt_one`: the same in a field, with `/ (1 - r) ^ (j + 1)`.
- The `descFactorial` special case that supplies each term of that sum:
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one'` / `tsum_descFactorial_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n.descFactorial j * r ^ n = j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one` / `tsum_descFactorial_mul_geometric_of_norm_lt_one`: the field versions, with `/ (1 - r) ^ (j + 1)`.
**Additions to other files:**
- `Combinatorics/Enumerative/Stirling.lean`: `Nat.pow_eq_sum_stirlingSecond_mul_descFactorial`, expressing every power `n ^ k` as a linear combination `n ^ k = ∑ j ∈ range (k + 1), stirlingSecond k j * n.descFactorial j`.
- `Data/Nat/Factorial/Basic.lean`: `Nat.descFactorial_mul_self`, the identity `n.descFactorial j * n = n.descFactorial (j + 1) + j * n.descFactorial j`, used in the induction proving the Stirling result above.
**Other changes:**
- `summable_pow_mul_geometric_of_norm_lt_one` (statement unchanged) is now a one-line consequence of the general formula; its previous proof via `ascPochhammer` is deleted, so the `RingTheory.Polynomial.Pochhammer` import is no longer needed.
- The statement of `summable_descFactorial_mul_geometric_of_norm_lt_one` changes from the shifted summand `(n + k).descFactorial k * r ^ n` to `n.descFactorial k * r ^ n`, to match the new `hasSum`/`tsum` lemmas. It had no other uses in Mathlib, and the shifted form is recoverable in one line from `summable_choose_mul_geometric_of_norm_lt_one`.
- The proof of `hasSum_coe_mul_geometric_of_norm_lt_one'` (`k = 1`) is simplified using the general formula, and the `k = 2` case is added: `∑' n, n ^ 2 * r ^ n = r * (1 + r) / (1 - r) ^ 3` (`hasSum_sq_mul_geometric_of_norm_lt_one'` and the three companion lemmas).
**Note**: redundant imports no longer needed because of changes to the code have not been removed yet since at least 5 other files depend on these as transitive imports.
**AI Disclosure**: this code originated in the FLT project, where an initial version was written by William Coram and Samuel Yin with AI assistance (Claude, later cleaned up with Codex). It has since been substantially rewritten for this PR; little of the original generated code remains.
Co-authored-by: Malhar A. Patel <142735852+Mal-Pat@users.noreply.github.com>
Co-authored-by: William Coram
Co-authored-by: Samuel Yin
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
t-analysis
maintainer-merge
|
195/83 |
Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/SpecialFunctions/OrdinaryHypergeometric.lean,Mathlib/Analysis/SpecialFunctions/Pochhammer.lean,Mathlib/Analysis/SpecialFunctions/PolynomialExp.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Basic.lean,Mathlib/Analysis/SpecificLimits/Normed.lean,Mathlib/Combinatorics/Enumerative/Stirling.lean,Mathlib/Data/Nat/Factorial/Basic.lean,Mathlib/InformationTheory/Coding/KraftMcMillan.lean,Mathlib/Topology/Instances/CantorSet.lean |
11 |
34 |
['Mal-Pat', 'YaelDillies', 'github-actions', 'grunweg', 'pepamontero'] |
nobody |
9-14333 9 days ago |
9-75337 9 days ago |
15-11700 15 days |
| 40510 |
felixpernegger author:felixpernegger |
refactor: reorganize Topology/EMetricSpace/Defs to generalise basic results |
This PR reorganizes the Topology/EMetricSpace/Defs so that various results that previously only held for `PseudoEMetricSpace` now also hold for `WeakPseudoEMetricSpace` (in particular ENNReal etc). This is a necessary stepping stone to generalise many definitions and theorems across mathlib to `WeakPseudoEMetricSpace`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
maintainer-merge
|
288/183 |
Mathlib.lean,Mathlib/Topology/EMetricSpace/Defs.lean,Mathlib/Topology/EMetricSpace/MulOpposite.lean,Mathlib/Topology/EMetricSpace/Weak.lean,Mathlib/Topology/MetricSpace/HausdorffDistance.lean,Mathlib/Topology/MetricSpace/IsometricSMul.lean,Mathlib/Topology/MetricSpace/Pseudo/Defs.lean |
7 |
28 |
['felixpernegger', 'github-actions', 'mathlib-bors', 'scholzhannah'] |
scholzhannah assignee:scholzhannah |
9-11254 9 days ago |
9-13171 9 days ago |
41-5381 41 days |
| 41813 |
sqrt-of-2 author:sqrt-of-2 |
feat(LinearAlgebra): totally nonnegative matrices |
Define totally nonnegative matrices and add a basic API.
A matrix is totally nonnegative if all its finite minors have nonnegative determinant.
From RealRooted
Co-authored-by: Yaël Dillies <yael.dillies@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
115/1 |
Mathlib.lean,Mathlib/Data/Set/Finite/Range.lean,Mathlib/LinearAlgebra/Matrix/Determinant/TotallyNonneg.lean,Mathlib/Order/Hom/Set.lean |
4 |
17 |
['Vierkantor', 'YaelDillies', 'github-actions', 'sqrt-of-2', 'vlad902'] |
nobody |
8-68613 8 days ago |
8-71488 8 days ago |
8-80896 8 days |
| 41849 |
ZRTMRH author:ZRTMRH |
feat(Combinatorics/Quiver/Path): add `Quiver.Reachable` |
Add `Quiver.Reachable a b`, the existence of a directed path from `a` to `b`, together with its basic preorder API (`@[refl]`/`@[trans]`) and `Path.reachable`/`Hom.reachable`.
Unlike `SimpleGraph.Reachable`, this is only a preorder, not an equivalence, since quiver paths are directed; the symmetric notion is reachability in `Symmetrify V`.
---
This will be used by #38310 (where it was suggested in review).
This PR was written with AI assistance (Claude). The code has been reviewed by the author.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
maintainer-merge
|
40/1 |
Mathlib/Combinatorics/Quiver/Path.lean |
1 |
16 |
['SnirBroshi', 'YaelDillies', 'ZRTMRH', 'github-actions', 'robin-carlier'] |
nobody |
8-46704 8 days ago |
8-50185 8 days ago |
9-36298 9 days |
| 33664 |
ooovi author:ooovi |
feat(Geometry/Convex/Cone/Pointed): face lattice of pointed cones |
- Define PointedCone.IsFaceOf, for a pointed cone being a face of another pointed cone.
- Prove some basic properties, that faces are extreme sets of their cone, and how they behave under intersection, map and product operations.
- Define `Face` by bundling the `IsFaceOf` structure, and show the complete lattice structure on it.
- Prove that taking the product of two faces is an order isomorphism.
Co-authored-by: Martin Winter
---
- [x] depends on: #33780 for the definition of the lineal space
- [x] depends on: #39185 for `isFaceOf`
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry
maintainer-merge
|
202/0 |
Mathlib.lean,Mathlib/Geometry/Convex/Cone/Face/Lattice.lean |
2 |
204 |
['YaelDillies', 'eric-wieser', 'github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'ooovi', 'vihdzp'] |
nobody |
6-27447 6 days ago |
6-28187 6 days ago |
12-22969 12 days |
| 37959 |
artie2000 author:artie2000 |
feat(LinearAlgebra/Dimension/Free): isomorphic to base ring iff rank is one |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
maintainer-merge
label:t-algebra$ |
18/10 |
Mathlib/LinearAlgebra/Dimension/Free.lean |
1 |
30 |
['artie2000', 'github-actions', 'mathlib-merge-conflicts', 'themathqueen'] |
themathqueen assignee:themathqueen |
5-26838 5 days ago |
6-5622 6 days ago |
28-65586 28 days |
| 41088 |
Brian-Nugent author:Brian-Nugent |
feat(Topology): sheafRestrict is a right adjoint |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
maintainer-merge
|
5/0 |
Mathlib/Topology/Sheaves/Over.lean |
1 |
3 |
['Brian-Nugent', 'github-actions', 'j-loreaux'] |
j-loreaux assignee:j-loreaux |
4-69246 4 days ago |
30-155 29 days ago |
29-86368 29 days |
| 41731 |
mpacholski author:mpacholski |
feat(Topology/Algebra/Module/Spaces/ContinuousLinearMap): convert `toLinearMap₁₂` to a linear map |
Convert the projection `toLinearMap₁₂` (which strips the topology from a continuous semibilinear map) to a linear map, by showing that it preserves addition and scalar multiplication. We also rename `toLinearMap₁₂_apply` to `toLinearMap₁₂_apply_apply_apply` without deprecation so that we can have `_apply` be a different lemma.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
tech debt
maintainer-merge
|
11/9 |
Mathlib/Analysis/Fourier/FourierTransformDeriv.lean,Mathlib/MeasureTheory/Measure/CharacteristicFunction/TaylorExpansion.lean,Mathlib/Topology/Algebra/Module/Spaces/ContinuousLinearMap.lean |
3 |
24 |
['github-actions', 'mpacholski', 'pechersky', 'themathqueen'] |
nobody |
4-6556 4 days ago |
7-79009 7 days ago |
9-36336 9 days |
| 41189 |
ADedecker author:ADedecker |
feat: define Fredholm operators between TVSs |
Project started during the May 2026 workshop "Techniques and Tools for the Formalization of Analysis" at ICERM.
Co-authored-by: Jon Bannon <jbannon@siena.edu>
Co-authored-by: Yongxi (Aaron) Lin <aaronlin@andrew.cmu.edu>
Co-authored-by: Patrick Massot <patrickmassot@free.fr>
Co-authored-by: Oliver Nash <github@olivernash.org>
Co-authored-by: Filippo A. E. Nuccio <filippo.nuccio@univ-st-etienne.fr>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [x] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39100
- [x] depends on: #41038
- [x] depends on: #41229
- [x] depends on: #41250
[](https://gitpod.io/from-referrer/)
|
t-analysis
maintainer-merge
|
380/0 |
Mathlib.lean,Mathlib/Algebra/Module/LinearMap/FiniteRange.lean,Mathlib/Analysis/Normed/Operator/Fredholm/Basic.lean |
3 |
61 |
['ADedecker', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'themathqueen'] |
themathqueen assignee:themathqueen |
3-16689 3 days ago |
4-11755 4 days ago |
9-67783 9 days |
| 41984 |
fpvandoorn author:fpvandoorn |
fix: typo in simps error messages |
* Remove trailing underscores in names `simps`-errors would erroneously print
* Restore Lean 3 error message tests.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
maintainer-merge
awaiting-author
|
46/27 |
Mathlib/Tactic/Simps/Basic.lean,MathlibTest/Simps.lean |
2 |
4 |
['Vierkantor', 'github-actions', 'grunweg'] |
nobody |
3-2577 3 days ago |
3-2577 3 days ago |
2-5055 2 days |
| 40724 |
justus-springer author:justus-springer |
feat(Analysis/InnerProductSpace): inner products on exterior powers |
Given a real inner product space `E`, we construct a canonical inner product on `⋀[ℝ]^n E` via the Gram determinant formula: on decomposable elements, `⟪v₁ ∧ ⋯ ∧ vₙ, w₁ ∧ ⋯ ∧ wₙ⟫ = det (⟪vⱼ, wᵢ⟫)ᵢⱼ`.
There are two generalizations of this construction: Going from `ℝ` to `RCLike`, and getting rid of the `FiniteDimensional` assumption. Both would require some prerequisites, hence they are left as future work for now (see the future work section of the module docstring).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
maintainer-merge |
159/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/ExteriorPower.lean,Mathlib/Analysis/InnerProductSpace/GramMatrix.lean |
3 |
16 |
['github-actions', 'justus-springer', 'mckoen', 'tb65536'] |
nobody |
3-1874 3 days ago |
3-2987 3 days ago |
38-16904 38 days |
| 41121 |
Scarlett-le author:Scarlett-le |
feat(Geometry/Euclidean/Angle): add the Alternate segment theorem |
Adds the Alternate segment theorem to`Mathlib/Geometry/Euclidean/Angle/Sphere.lean`:
if a line is tangent to a sphere `s` at `p₁`
and `p₁`, `p₂`, `p₃` lie on `s`, then twice the oriented angle from the tangent to the chord
`p₁p₂` equals twice the inscribed angle subtending `p₁p₂` at `p₃`. As elsewhere in this file,
the angles are doubled because the underlying oriented angles agree only mod `π`.
## Dependencies
- [x] depends on: #41143 |
t-euclidean-geometry
maintainer-merge
|
27/0 |
Mathlib/Geometry/Euclidean/Angle/Sphere.lean |
1 |
7 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
2-59414 2 days ago |
24-52087 24 days ago |
27-10754 27 days |
| 42027 |
loefflerd author:loefflerd |
chore(Data/FunLike): tag `IsApply` lemmas as simp |
The new `IsApply` typeclasses allow many existing special-case `coe_xxx` lemmas to be unified; but the general lemmas currently do not have the simp tag. This tags them as simp.
Other minor changes:
- There were two lemmas with statements identical up to argument order: `FunLike.coe_smul` (directly written) and `FunLike.coe_smul'` (auto-generated by `to_additive`). I unified these using `to_additive existing`, with a deprecation alias for `FunLike.coe_smul'`.
- Downstream code that uses `FunLike.coe_smul'` is adjusted appropriately (un-squeezing a couple of lengthy terminal `simp only`'s in the process).
- One more specific simp lemma downstream (`ContinuousLinearMap.coe_pow'`) is removed, because `simp` can now prove it using the `FunLike` simp lemmas. A misnamed lemma in this file, `ContinuousLinearMap.coe_pow`, was re-named to `ContinuousLinearMap.toLinearMap_pow`.
- There were just two simps (both in `Mathlib/Probability/Distributions/Gaussian/Basic.lean`) which broke, because they used an un-squeezed `simp` along with an additional explicitly provided lemma (not part of the default simp set) that conflicted with `FunLike.coe_zero`. These I fixed by explicitly removing `FunLike.coe_zero` from the simp set where necessary.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
maintainer-merge
|
44/50 |
Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Data/FunLike/IsApply.lean,Mathlib/LinearAlgebra/Eigenspace/ContinuousLinearMap.lean,Mathlib/MeasureTheory/VectorMeasure/SetIntegral.lean,Mathlib/NumberTheory/ModularForms/JacobiTheta/TwoVariable.lean,Mathlib/Probability/Distributions/Gaussian/Basic.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
7 |
17 |
['github-actions', 'leanprover-radar', 'loefflerd', 'mcdoll'] |
nobody |
2-31702 2 days ago |
2-38094 2 days ago |
3-15840 3 days |
| 39026 |
fpvandoorn author:fpvandoorn |
feat: add assume tactic |
Teaching tactic: `assume p` is short for `intro (_ : p)`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[Zulip thread](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Assume.20tactic/with/593477478)
[](https://gitpod.io/from-referrer/)
|
t-meta
awaiting-author
maintainer-merge
|
125/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Assume.lean,MathlibTest/Assume.lean |
4 |
12 |
['fpvandoorn', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
2-25337 2 days ago |
80-27300 80 days ago |
0-1 1 second |
| 41707 |
marcelolynch author:marcelolynch |
fix(cache): carry decompression pipeline state across download rounds |
`cache get` downloads files in multiple rounds (corresponding to azure containers, e.g. `master` then `forks` for a fork PR) and decompresses them in a pipeline while the download streams.
Each round started from a fresh pipeline state and the round loop kept only the last round's state, so some files queued for decompression plus the in-flight leantar batch was dropped: the .ltars were on disk but never unpacked, and the next lake build recompiled those modules.
The in-flight leantar was also never awaited, so it could still be writing build outputs while lake build read them.
Reported in https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/cache.20issues/with/609923362
The fix makes the pipeline state an explicit value threaded through the rounds: a DecompState structure (pending files, in-flight batch, counters) embedded in TransferState, and finalizeDecomp drain after the last round.
Also adds related tests in Cache/Test.lean. |
CI
maintainer-merge
|
164/58 |
Cache/Requests.lean,Cache/Test.lean |
2 |
6 |
['github-actions', 'joneugster', 'marcelolynch'] |
joneugster assignee:joneugster |
2-25178 2 days ago |
6-7476 6 days ago |
9-61229 9 days |
| 40468 |
BoltonBailey author:BoltonBailey |
feat(Data/Nat/Choose/Multinomial): add positivity support |
This PR adds `positivity` tactic support for `Multiset.multinomial`, by adding a `_pos` theorem and an extension.
This was done as a part of Project Numina's LeanTriathlon project. AI was used as an assistant in the creation of this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
maintainer-merge
|
24/0 |
Mathlib/Data/Nat/Choose/Multinomial.lean |
1 |
8 |
['BoltonBailey', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
2-23795 2 days ago |
5-81789 5 days ago |
42-4088 42 days |
| 41993 |
eneoli author:eneoli |
feat(Tactic/Linter/UnusedTactic): mark `isIgnoreTacticKind` and `addIgnoreTacticKind` as public |
Marks `isIgnoreTacticKind` and `addIgnoreTacticKind` in the `unusedTactic` linter as `public` definitions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
new-contributor
maintainer-merge
|
25/2 |
Mathlib/Tactic/Linter/UnusedTactic.lean,MathlibTest/Linter/UnusedTactic.lean |
2 |
5 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
2-13230 2 days ago |
4-75479 4 days ago |
4-75292 4 days |
| 41976 |
fpvandoorn author:fpvandoorn |
refactor(simps): centralize notation_class and initialize_simps_projections |
* Create a single file that declares all `notation_class` attributes and `initialize_simps_projections` calls for many structures in Core.
* Some of these notation classes were previously declared in `Tactic.Simps.Basic` or in other Mathlib files. The latter was problematic, because then you could have files that import `simps` and a Core structure, but not generate the right simp lemmas.
* Make sure that we import this file instead of the internal `Tactic.Simps.Basic` file throughout Mathlib. Not importing this file can cause `simps` to generate wrong lemmas.
* Also call `initialize_simps_projections` for (some) classes that are declared in Mathlib. (This is not super important, but ensures that these projections have to be only generated once, instead of in every file that imports it.)
* This was prompted by observing faulty behavior in #40653.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import
t-meta
maintainer-merge
|
170/36 |
Mathlib.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Notation/Defs.lean,Mathlib/CategoryTheory/Monoidal/Functor/Types.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/Subtype.lean,Mathlib/Data/TwoPointing.lean,Mathlib/Logic/Equiv/Defs.lean,Mathlib/Order/Defs/LinearOrder.lean,Mathlib/Order/Notation.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Common.lean,Mathlib/Tactic/ProdAssoc.lean,Mathlib/Tactic/ProxyType.lean,Mathlib/Tactic/Simps.lean,Mathlib/Tactic/Simps/Basic.lean,Mathlib/Tactic/Simps/NotationClass.lean,MathlibTest/Simps.lean,MathlibTest/TacticCheckInstancesSimps.lean |
19 |
3 |
['github-actions', 'joneugster'] |
nobody |
2-12651 2 days ago |
5-9933 5 days ago |
5-10018 5 days |
| 41488 |
artie2000 author:artie2000 |
feat(LinearAlgebra/Dimension/Free): division version of tower law |
Split from #37959
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
maintainer-merge
label:t-algebra$ |
22/0 |
Mathlib/LinearAlgebra/Dimension/Free.lean |
1 |
10 |
['artie2000', 'github-actions', 'tb65536', 'themathqueen'] |
nobody |
2-4071 2 days ago |
4-82382 4 days ago |
5-23588 5 days |
| 40663 |
Vierkantor author:Vierkantor |
feat: solve equalities of instances in `convert` |
This PR sets the `preTransparency` of `convert` to `.instances`, which means it will not run congruence on goals that already are equal at `.instances` transparency. In other words, `convert` (without exclamation) should leave no goals of the form `instA.toC = instB.toC`.
There are 387 (~ 8.5%) additional `convert!` calls in Mathlib that could become `convert` after this change, in addition to 2626 (~ 57,8%) where `convert` already succeeds at reducible transparency. I found no cases where `postTransparency := .instances` would be needed instead.
Full breakdown of stats, according to the test script below and passing the captured log messages to `sort | uniq -c`:
* 2626 `convert` would work
* 1513 `convert!` (i.e. `convert (postTransparency := .default)`) is required
* 387 `convert (preTransparency := .instances)` is required
* 16 cause an error in the test script
The test script consists of replacing the elaborator for `convert` with:
```lean
def sameGoals (gs₁ gs₂ : List MVarId) : MetaM Bool := do
if gs₁.length == gs₂.length then
try
(gs₁.zip gs₂).allM fun (g₁, g₂) => do
-- Check that they agree on the set of free variables, otherwise we get errors.
-- We assume the context in the `convert` case is a subset of the `convert!` case
-- since `convert!` can more agressively unfold and introduce more variables.
if !(← g₁.getDecl).lctx.isSubPrefixOf (← g₂.getDecl).lctx then return false
g₂.withContext <| withReducible <| isDefEq (← g₁.getType) (← g₂.getType)
catch _ => return false
else
return false
elab_rules : tactic
| `(tactic| convert $[!%$expensive]? $cfg $[←%$sym]? $term $[using $n]? $[with $ps?*]?) =>
withMainContext do
let actualConfig ← Convert.elabConfig expensive.isSome cfg
let cheapConfig ← Convert.elabConfig false cfg
let redConfig := { cheapConfig with
preTransparency := .reducible, postTransparency := .reducible }
let preInstConfig := { cheapConfig with
preTransparency := .instances, postTransparency := .reducible }
let postInstConfig := { cheapConfig with
postTransparency := .instances, preTransparency := .reducible }
let patterns := (ps?.getD #[]).toList
let expectedType ← mkFreshExprMVar (mkSort (← getLevel (← getMainTarget)))
let (e, gs) ← elabTermForConvert term expectedType
liftMetaTactic fun g ↦ do
-- Don't retain metavar assignments but do retain messages.
let msgs ← withoutModifyingState do
try
let actualGoals ← g.convert e sym.isSome (n.map (·.getNat)) actualConfig patterns
let redGoals ← g.convert e sym.isSome (n.map (·.getNat)) redConfig patterns
if ← sameGoals actualGoals redGoals then
logInfo m!"convert(reducible)"
else
let preInstGoals ← g.convert e sym.isSome (n.map (·.getNat)) preInstConfig patterns
if ← sameGoals actualGoals preInstGoals then
logInfo m!"convert(preInst)"
else
let postInstGoals ← g.convert e sym.isSome (n.map (·.getNat)) postInstConfig patterns
if ← sameGoals actualGoals postInstGoals then
logInfo m!"convert(postInst)"
else if expensive.isSome then
logInfo m!"convert(expensive)"
else
logInfo m!"convert(error)"
catch e =>
logInfo m!"convert(error {e.toMessageData})"
pure ()
Core.getMessageLog
Core.setMessageLog msgs
return (← g.convert e sym.isSome (n.map (·.getNat)) actualConfig patterns) ++ gs
```
---
Ideally we'd run a benchmark on this PR, or even better one that compares `preTransparency` and `postTransparency`. But we don't have a lot of calls to plain `convert` yet, since I'd want to wait for the migration until #38071 is merged.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
maintainer-merge
|
46/6 |
Mathlib/Algebra/GCDMonoid/Basic.lean,Mathlib/Analysis/SpecialFunctions/Log/InvLog.lean,Mathlib/Geometry/Euclidean/Incenter.lean,Mathlib/NumberTheory/ClassNumber/AdmissibleCardPowDegree.lean,Mathlib/Tactic/Convert.lean,MathlibTest/Tactic/Convert/Instances.lean |
6 |
20 |
['JovanGerb', 'Vierkantor', 'github-actions', 'joneugster', 'leanprover-radar'] |
joneugster and thorimur assignee:joneugster assignee:thorimur |
2-1241 2 days ago |
2-85537 2 days ago |
31-33378 31 days |
| 41487 |
Deicyde author:Deicyde |
feat: implement pi-base cross-reference attribute |
Adds a `@[pibase ID]` cross-reference attribute for canonical pi-base identifiers.
The parser accepts IDs of the form `P000001`, `S000023`, and `T000001`, and routes them to the corresponding `properties/`, `spaces/`, or `theorems/` page on `topology.pi-base.org`.
Tests cover docstring insertion, `#pibase_tags`, all three URL routes, and malformed IDs.
This PR was prepared with assistance from Codex. Based heavily on #41290 |
t-meta
LLM-generated
maintainer-merge
|
149/8 |
Mathlib/Tactic/CrossRefAttribute.lean,MathlibTest/CrossRefAttribute.lean |
2 |
20 |
['Deicyde', 'github-actions', 'joneugster', 'mathlib-merge-conflicts', 'thorimur', 'vlad902'] |
joneugster and thorimur assignee:joneugster assignee:thorimur |
1-78499 1 day ago |
1-79191 1 day ago |
11-22918 11 days |
| 40282 |
rosborn author:rosborn |
feat(Algebra/Group/Subgroup): add sup/iSup/biSup/sSup_characteristic |
The join of characteristic subgroups is characteristic.
---
These mirror the existing sup_normal/iSup_normal/biSup_normal/sSup_normal family in Subgroup/Pointwise.lean. I've left out the inf versions and extras like the characteristic closure until there's a use for them; they're easy to add later.
Discussed here: [Zulip](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Additional.20Group.20Theory.20Lemmas/with/600714666)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
|
t-algebra
maintainer-merge
label:t-algebra$ |
40/0 |
Mathlib/Algebra/Group/Subgroup/Basic.lean |
1 |
21 |
['SnirBroshi', 'adomani', 'github-actions', 'mathlib-merge-conflicts', 'rosborn', 'themathqueen'] |
themathqueen assignee:themathqueen |
1-78311 1 day ago |
3-67446 3 days ago |
41-9882 41 days |
| 39371 |
fpvandoorn author:fpvandoorn |
feat: tag lemmas with compactness and closedness |
---
- [x] depends on: #39370
[](https://gitpod.io/from-referrer/)
|
t-meta
t-topology
maintainer-merge
|
88/11 |
Mathlib/Topology/Basic.lean,Mathlib/Topology/Closure.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/MetricSpace/ProperSpace.lean,Mathlib/Topology/Order/Compact.lean,Mathlib/Topology/Order/OrderClosed.lean,Mathlib/Topology/Separation/Basic.lean,Mathlib/Topology/Separation/Hausdorff.lean,MathlibTest/Compactness.lean |
9 |
4 |
['github-actions', 'joneugster', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
joneugster assignee:joneugster |
1-77551 1 day ago |
5-10489 5 days ago |
5-10303 5 days |
| 41877 |
BoltonBailey author:BoltonBailey |
feat(Algebra/Order/Floor/Ring): `positivity` for `Int.fract` |
This PR adds a positivity extension for `Int.fract`, which is always nonnegative.
I used Claude Code to prepare this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
t-meta
maintainer-merge
label:t-algebra$ |
16/0 |
Mathlib/Algebra/Order/Floor/Ring.lean,MathlibTest/positivity.lean |
2 |
2 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
1-74210 1 day ago |
8-60917 8 days ago |
8-61773 8 days |
| 40298 |
xroblot author:xroblot |
feat(Algebra/Algebra): reinterpret a RingEquiv as a ℕ/ℤ/ℚ-algebra isomorphism |
Adds the `RingEquiv` analogues of the `RingHom.to{Nat,Int,Rat}AlgHom` / `RingHom.equivRatAlgHom` constructions, over `ℕ`, `ℤ` and `ℚ`:
- `RingEquiv.toNatAlgEquiv`, `RingEquiv.toIntAlgEquiv`, `RingEquiv.toRatAlgEquiv`: a `RingEquiv` is canonically an ℕ-, ℤ- or ℚ-algebra isomorphism.
- `ringEquivEquivNatAlgEquiv`, `ringEquivEquivIntAlgEquiv`, `ringEquivEquivRatAlgEquiv`: the corresponding equivalences `(R ≃+* S) ≃ (R ≃ₐ[·] S)`.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra
maintainer-merge
label:t-algebra$ |
111/14 |
Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/Algebra/Algebra/Hom/Rat.lean |
2 |
56 |
['github-actions', 'plp127', 'themathqueen', 'xroblot'] |
themathqueen assignee:themathqueen |
1-54578 1 day ago |
3-36988 3 days ago |
45-61716 45 days |
| 38200 |
Parcly-Taxel author:Parcly-Taxel |
feat: Turán numbers and their strict monotonicity |
`strictMonoOn_turanNumber` was initially proved by @Aristotle-Harmonic, then hand-polished.
Co-authored-by: Aristotle (Harmonic) <aristotle-harmonic@harmonic.fun> |
t-combinatorics
tech debt
maintainer-merge
|
45/20 |
Mathlib/Combinatorics/SimpleGraph/Extremal/Turan.lean |
1 |
9 |
['Parcly-Taxel', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
1-43755 1 day ago |
1-44391 1 day ago |
95-20109 95 days |
| 37685 |
vihdzp author:vihdzp |
feat: Fodor's lemma |
We define stationary sets and prove Fodor's lemma, following the proof at Wikipedia.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39727
I'm surprised that this has a [Wikipedia article](https://en.wikipedia.org/wiki/Fodor%27s_lemma) but isn't listed in 1000.yaml. Is it just because the name has "lemma" instead of "theorem"?
[](https://gitpod.io/from-referrer/)
|
t-set-theory
t-order
large-import
maintainer-merge
|
70/3 |
Mathlib/SetTheory/Cardinal/Cofinality/Club.lean,Mathlib/SetTheory/Ordinal/Basic.lean |
2 |
16 |
['YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'staroperator', 'vihdzp'] |
nobody |
1-43702 1 day ago |
2-40862 2 days ago |
2-75733 2 days |
| 38227 |
vihdzp author:vihdzp |
chore(Algebra/Order/Monoid/Unbundled/Basic): golfing + formatting |
We make use of `variable`, fix some weird spacing, and golf many proofs.
The only breaking change is that `mul_lt_iff_lt_one_left'`/`add_lt_iff_neg_left` now takes an explicit argument, matching the theorems surrounding it.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Not too fond of the `calc` tactic.
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-order
maintainer-merge
label:t-algebra$ |
233/501 |
Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean |
2 |
9 |
['YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
1-42459 1 day ago |
1-80803 1 day ago |
27-875 27 days |
| 38319 |
Zetetic-Dhruv author:Zetetic-Dhruv |
feat(Combinatorics/SetFamily): Assouad's dual VC bound |
Adds the Finset-level form of Assouad's 1983 dual VC bound: if a family
`𝒜 : Finset (Finset α)` has VC dimension at most `d`, then for any
ground set `X : Finset α` the dual family
`{𝒜.filter (· ∋ x) : x ∈ X}` has VC dimension at most `2 ^ (d + 1) - 1`.
New declarations (in `Finset` namespace):
- `dualFamily 𝒜 X`: for each `x ∈ X`, the subfamily `{A ∈ 𝒜 | x ∈ A}`
- `mem_dualFamily` (`@[simp]`): membership characterisation
- `exists_shatters_of_dualFamily_shatters`: Assouad's bitstring-coding lemma
- `vcDim_dualFamily_le`: the headline VC bound
Proof by Assouad's classical bitstring-coding argument. Sits on top of `Finset.shatterer` / `Finset.vcDim` from
`Mathlib.Combinatorics.SetFamily.Shatter`.
References:
- P. Assouad, Densite et dimension, Ann. Inst. Fourier 33(3) (1983), Thm 2.13
- J. Matousek, Lectures on Discrete Geometry, GTM 212, Springer, 2002, Section 10.3 Lemma 10.3.3
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
maintainer-merge
|
199/0 |
Mathlib.lean,Mathlib/Combinatorics/SetFamily/DualVC.lean,docs/references.bib |
3 |
44 |
['Shreyas4991', 'YaelDillies', 'Zetetic-Dhruv', 'github-actions'] |
b-mehta assignee:b-mehta |
1-41857 1 day ago |
77-72041 77 days ago |
94-32503 94 days |
| 42074 |
felixpernegger author:felixpernegger |
chore(Dynamics): fix defs with underscore |
This PR deprecates all (1) defs with underscore in Dynamics and renames it according to the naming convention.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-dynamics
tech debt
maintainer-merge
|
7/4 |
Mathlib/Dynamics/TopologicalEntropy/Subset.lean |
1 |
2 |
['github-actions', 'grunweg'] |
ADedecker assignee:ADedecker |
1-32628 1 day ago |
1-65375 1 day ago |
1-65725 1 day |
| 42073 |
felixpernegger author:felixpernegger |
chore(FieldTheory): fix defs with underscores |
This PR deprecates all (1) defs with underscore in FieldTheory and renames it according to the naming convention.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
easy
maintainer-merge
label:t-algebra$ |
7/4 |
Mathlib/FieldTheory/Differential/Liouville.lean,Mathlib/FieldTheory/Galois/Basic.lean,Mathlib/FieldTheory/IntermediateField/Basic.lean,Mathlib/FieldTheory/LinearDisjoint.lean |
4 |
3 |
['felixpernegger', 'github-actions', 'grunweg'] |
nobody |
1-32611 1 day ago |
1-65542 1 day ago |
1-66318 1 day |
| 42054 |
yuanyi-350 author:yuanyi-350 |
refactor: generalize `Module.Finite.of_surjective` to arbitrary ring homomorphisms |
|
t-ring-theory
maintainer-merge
|
9/10 |
Mathlib/RingTheory/Finiteness/Basic.lean |
1 |
4 |
['github-actions', 'themathqueen'] |
nobody |
1-17878 1 day ago |
2-36789 2 days ago |
2-36602 2 days |
| 41965 |
bryangingechen author:bryangingechen |
ci: retire legacy zulip emoji workflows, enable emojis on mathlib4-nightly-testing |
This PR replaces our existing zulip emoji reaction workflows with new triggers in the new "reconciliation" workflow (`zulip_emoji_reconcile.yml`) added in #41852.
Deleted workflows:
- `zulip_emoji_ci_status.yaml`: handles CI status reactions. Replaced with `workflow_run` trigger.
- `zulip_emoji_closed_pr.yaml`: handles reactions for closed / reopened PRs. Replaced with `pull_request_target` `closed` and `reopened` triggers.
- `zulip_emoji_labelling.yaml`: handles reactions for awaiting-author and maintainer-merge labels. Replaced with `pull_request_target` `labeled` and `unlabeled` triggers.
- `zulip_emoji_merge_delegate.yaml`: handles reactions for PRs merged into `master`. Replaced with `pull_request_target` `closed` and `reopened` triggers.
The Zulip reaction steps have also been removed from `maintainer_bors_wf_run.yml` which now just handles labels: that label event then triggers the reconciliation workflow rather than handling the reactions on its own.
This PR also adds and wires in a configuration file for `mathlib4-nightly-testing` so that reactions for `nightly#XXX` PRs are also managed.
Prepared with Claude code.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
CI
LLM-generated
file-removed
maintainer-merge
|
159/348 |
.github/workflows/maintainer_bors_wf_run.yml,.github/workflows/zulip_emoji_ci_status.yaml,.github/workflows/zulip_emoji_closed_pr.yaml,.github/workflows/zulip_emoji_labelling.yaml,.github/workflows/zulip_emoji_merge_delegate.yaml,.github/workflows/zulip_emoji_reconcile.yml,.github/zulip-emoji-config-nightly.json,docs/workflows.md |
8 |
3 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
1-12565 1 day ago |
5-50762 5 days ago |
5-50575 5 days |
| 42089 |
mathlib-splicebot author:mathlib-splicebot |
fix(LinearAlgebra/Matrix/Notation): fix defeq abuse in lemma |
---
This PR was automatically created from PR #39161 by @alreadydone via a [review comment](https://github.com/leanprover-community/mathlib4/pull/39161#discussion_r3650515623) by @themathqueen. |
t-algebra
easy
maintainer-merge
label:t-algebra$ |
1/1 |
Mathlib/LinearAlgebra/Matrix/Notation.lean |
1 |
3 |
['github-actions', 'themathqueen'] |
nobody |
1-2484 1 day ago |
1-4141 1 day ago |
1-3954 1 day |
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Updated |
Last status change |
total time in review |
| 35753 |
Vilin97 author:Vilin97 |
feat(Topology/Algebra/Order): regular grid helpers and piecewise linear interpolation |
Make API for piecewise linear interpolation on regular grids. I need these to for ODE time-stepping methods, like forward Euler, and later Runge–Kutta methods.
Follow-up PR: #35755 (forward Euler method convergence).
I don't know if these numerical analysis ODE-solving methods even belong in mathlib. If someone could advise me on it, I would appreciate it.
---
The initial proof was produced by [Aristotle](https://aristotle.harmonic.fun). The code was iteratively refined (factoring out lemmas, golfing, simplifying proofs) using Claude Code.
- [ ] depends on: #38091 |
t-topology
new-contributor
LLM-generated
maintainer-merge
|
201/0 |
Mathlib.lean,Mathlib/Topology/Algebra/Order/PiecewiseLinear.lean |
2 |
59 |
['Vilin97', 'YanYablonovskiy', 'adomani', 'botbaki-review', 'copilot-pull-request-reviewer', 'dagurtomas', 'eric-wieser', 'github-actions', 'grunweg', 'j-loreaux', 'mathlib-dependent-issues', 'wwylele'] |
nobody |
52-59423 1 month ago |
85-70143 85 days ago |
118-32636 118 days |
| 40925 |
JovanGerb author:JovanGerb |
chore(CategoryTheory/Functor/Category): don't expose `NatTrans.hcomp` |
This PR hides the definition of `NatTrans.hcomp`, because it has two equally sensible possible definitions. As a result, we can get rid of the `to_dual_insert_cast`. `simps` doesn't work for non-exposed definition, so `hcomp_app` is proved separately, and its dual `hcomp_app'` is added.
Note: some proofs break, because the `dsimp` set changes, due to the definition not being exposed. This is a bit unfortunate. There was some discussion on Zulip about changing `dsimp` for category theory into a simp set, which would fix this problem, because we could then add `hcomp_app` to this set.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
maintainer-merge
tech debt
|
30/15 |
Mathlib/AlgebraicTopology/DoldKan/NCompGamma.lean,Mathlib/AlgebraicTopology/DoldKan/PInfty.lean,Mathlib/CategoryTheory/Functor/Category.lean,Mathlib/CategoryTheory/Monoidal/Action/End.lean,Mathlib/CategoryTheory/Monoidal/End.lean,Mathlib/CategoryTheory/Triangulated/TStructure/SpectralObject.lean,Mathlib/CategoryTheory/Types/Basic.lean |
7 |
11 |
['JovanGerb', 'github-actions', 'grunweg', 'leanprover-radar', 'riccardobrasca'] |
nobody |
22-17228 22 days ago |
33-15125 33 days ago |
33-15745 33 days |
| 38214 |
emlis42 author:emlis42 |
feat(Algebra/ContinuedFractions): add Euler's continued fraction |
This PR formalizes Euler continued fractions by providing `euler` which construct one by giving head term and coefficients with some basic property.
We also introduce a transformation `GenContFract.toEuler` that maps a generalized continued fraction `g : GenContFract K` to an equivalent Euler continued fraction. |
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
364/0 |
Mathlib.lean,Mathlib/Algebra/ContinuedFractions/Euler.lean |
2 |
74 |
['YaelDillies', 'emlis42', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
13-18405 13 days ago |
19-1739 19 days ago |
81-52035 81 days |
| 39607 |
TentativeConvert author:TentativeConvert |
feat(Algebra/DirectSum): equivalence between direct sum indexed by ι₁ and double sum indexed by ι₂ and fibres of f : ι₁ → ι₂ |
1. Add variant `equivCongrLeft'` of `equivCongrLeft`, and corresponding `…_apply` lemma.
2. Add `…_of lemmas` for both `equivCongrLeft` and `equivCongrLeft'`.
3. Add `…of lemma` for `sigmaCurry`, i.e. `sigmaCurry_of`.
4. Add `sigmaFiberAddEquiv`: the equivalence between a direct sum indexed by a type `ι₁` and the double sum indexed by a type `ι₂` and the fibres of a map `f : ι₁ → ι₂`. Add two `…_apply` lemmas and an `…_of` lemma.
---
This is supposed to be a first step towards merging the draft PR #39356.
re 1: Mathematically, I don't see why one version should be preferred over the other, but I found the existing `equivCongrLeft` more difficult to work with when the equivalence `h : ι ≃ κ` is naturally given in the opposite direction. (I could not avoid explicit type casts through the equality `h.symm.symm = h` when defining `sigmaFiberAddEquiv` in terms of `equivCongrLeft`.)
Very unsure about the name of `equivCongrLeft'`. (I see that the name `equivCongrLeft` was chosen in analogy with `Equiv.piCongrLeft`. `Equiv.piCongrRight` looks very different, so presumably `equivCongrLeft'` should *not* be called `equivCongrRight`.)
re 4: Very unsure about the naming of the two different `…_apply` lemmas; called them `…_apply` and `…_apply'` for now. The second (`…_apply'`) cannot be a `simp` lemma as it would prevent the first (`…_apply`) from firing.
I've used Claude Opus for understanding error messages and git interaction, but everything is hand coded.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
maintainer-merge
label:t-algebra$ |
46/3 |
Mathlib/Algebra/DirectSum/Basic.lean |
1 |
48 |
['TentativeConvert', 'eric-wieser', 'github-actions', 'joneugster', 'themathqueen'] |
joneugster assignee:joneugster |
12-7538 12 days ago |
12-9520 12 days ago |
66-18037 66 days |
| 41616 |
JX-Mo author:JX-Mo |
refactor(RepresentationTheory): move instance Abelian (Rep k G) to Rep.Basic |
This instance removes the commutativity assumption on k in the current instance Abelian (Rep k G) in Rep.Iso. |
t-algebra
new-contributor
maintainer-merge
label:t-algebra$ |
2/2 |
Mathlib/RepresentationTheory/Rep/Basic.lean,Mathlib/RepresentationTheory/Rep/Iso.lean |
2 |
4 |
['github-actions', 'grunweg'] |
nobody |
10-21227 10 days ago |
15-18842 15 days ago |
15-18655 15 days |
| 41656 |
joelriou author:joelriou |
feat(AlgebraicTopology): order relation between simplices of the nerve of a partial order |
This is applied to the characterization of the order relation between simplices of `Δ[p] ⊗ Δ[q]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
maintainer-merge
|
64/2 |
Mathlib/AlgebraicTopology/SimplicialSet/NerveNondegenerate.lean,Mathlib/AlgebraicTopology/SimplicialSet/ProdStdSimplex.lean,Mathlib/AlgebraicTopology/SimplicialSet/Subcomplex.lean |
3 |
6 |
['github-actions', 'joelriou', 'robin-carlier'] |
nobody |
10-18640 10 days ago |
10-19706 10 days ago |
13-34746 13 days |
| 41818 |
Vierkantor author:Vierkantor |
feat(Tactic/Linter): add linter for missing `@[tactic_alt]` tags |
This PR adds a `tacticAlt` linter that complains when there are two tactics with the same user-facing name (usually: the first token in their syntax) but they aren't marked as `@[tactic_alt]` to each other. Those situations lead to duplicate entries in doc-gen's tactic overview page.
You can see example output in the tests file, or in the [build log](https://github.com/leanprover-community/mathlib4/actions/runs/29502419244/job/87654684693).
The current simple implementation has one limitation: if multiple duplicates are all being linted at once, each of them gets a linter warning. I think this is okay, but we could be a bit stricter and only produce the warning on the tactic that comes later in the environment.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
maintainer-merge
|
75/0 |
Mathlib/Tactic/ApplyAt.lean,Mathlib/Tactic/ClearExcept.lean,Mathlib/Tactic/Linter/TacticDocumentation.lean,MathlibTest/Linter/TacticDoc.lean |
4 |
5 |
['JovanGerb', 'github-actions', 'leanprover-radar'] |
JovanGerb assignee:JovanGerb |
9-52687 9 days ago |
9-86325 9 days ago |
9-86150 9 days |
| 35349 |
RemyDegenne author:RemyDegenne |
feat: data processing inequality for the Kullback-Leibler divergence |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #34841
- [x] depends on: #35089
- [x] depends on: #27953
- [x] depends on: #39819
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
maintainer-merge
|
290/24 |
Mathlib.lean,Mathlib/Analysis/Convex/Continuous.lean,Mathlib/InformationTheory/KullbackLeibler/DataProcessing.lean,Mathlib/MeasureTheory/Measure/Decomposition/IntegralRNDeriv.lean |
4 |
16 |
['EtienneC30', 'RemyDegenne', 'VictorBoscaro', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
EtienneC30 assignee:EtienneC30 |
9-36101 9 days ago |
10-28810 10 days ago |
25-28855 25 days |
| 40392 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Integral/Lebesgue/Basic): fix an `erw` |
Extracted from #40348.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
tech debt
maintainer-merge
|
11/1 |
Mathlib/Data/ENNReal/Operations.lean,Mathlib/MeasureTheory/Integral/Lebesgue/Basic.lean |
2 |
5 |
['felixpernegger', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
9-15084 9 days ago |
9-17193 9 days ago |
40-27731 40 days |
| 41243 |
dependabot author:dependabot |
chore(deps): bump GrantBirki/comment from 3.0.0 to 3.0.3 in /.github/workflows in the actions-version-updates group across 1 directory |
Bumps the actions-version-updates group with 1 update in the /.github/workflows directory: [GrantBirki/comment](https://github.com/grantbirki/comment).
Updates `GrantBirki/comment` from 3.0.0 to 3.0.3
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/grantbirki/comment/releases">GrantBirki/comment's releases</a>.</em></p>
<blockquote>
<h2>v3.0.3</h2>
<h2>What's Changed</h2>
<ul>
<li>Add release bundle attestations by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/48">GrantBirki/comment#48</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.3">https://github.com/GrantBirki/comment/compare/v3...v3.0.3</a></p>
<h2>v3.0.2</h2>
<h2>What's Changed</h2>
<ul>
<li>Bump version to v3.0.2 by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/47">GrantBirki/comment#47</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.2">https://github.com/GrantBirki/comment/compare/v3...v3.0.2</a></p>
<h2>v3.0.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Add dependency cooldowns by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/37">GrantBirki/comment#37</a></li>
<li>Bump actions/upload-artifact from 6.0.0 to 7.0.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/38">GrantBirki/comment#38</a></li>
<li>Bump actions/upload-artifact from 7.0.0 to 7.0.1 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/39">GrantBirki/comment#39</a></li>
<li>Bump esbuild from 0.27.7 to 0.28.1 in the npm_and_yarn group across 1 directory by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/40">GrantBirki/comment#40</a></li>
<li>Fix template variable documentation by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/41">GrantBirki/comment#41</a></li>
<li>Reduce npm dependency surface by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/45">GrantBirki/comment#45</a></li>
<li>Add versioned release automation by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/46">GrantBirki/comment#46</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.1">https://github.com/GrantBirki/comment/compare/v3...v3.0.1</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/GrantBirki/comment/commit/937820f3623fd0e300294bcc64ac7577fc0ad4cc"><code>937820f</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/48">#48</a> from GrantBirki/add-release-attestations</li>
<li><a href="https://github.com/GrantBirki/comment/commit/56617234d3c8c5bcb92b2ac851cc4925e3034254"><code>5661723</code></a> Bump version to v3.0.3</li>
<li><a href="https://github.com/GrantBirki/comment/commit/245ea8def6a8b8cd42098a154250be7098f4c97f"><code>245ea8d</code></a> Add release bundle attestations</li>
<li><a href="https://github.com/GrantBirki/comment/commit/93a7ff5a297b609ea35b67866cc3459676d2aba1"><code>93a7ff5</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/47">#47</a> from GrantBirki/bump-v3.0.2</li>
<li><a href="https://github.com/GrantBirki/comment/commit/44e0f6fce3957b6ba32ea1b28c2885c288723f4b"><code>44e0f6f</code></a> Bump version to v3.0.2</li>
<li><a href="https://github.com/GrantBirki/comment/commit/b23dd77391cf0a2538e898a73169eac9c1a6a6ff"><code>b23dd77</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/46">#46</a> from GrantBirki/versioned-auto-release</li>
<li><a href="https://github.com/GrantBirki/comment/commit/53e38fc3816c5a0ab34974efe7e26772fa504e39"><code>53e38fc</code></a> Make release workflow reruns resumable</li>
<li><a href="https://github.com/GrantBirki/comment/commit/b95b12a9f0e8d416e4dee45b1247c2ffa0d80f6b"><code>b95b12a</code></a> Disable persisted checkout credentials</li>
<li><a href="https://github.com/GrantBirki/comment/commit/a56acd4048fa2bfef519dbbc7b9f91cfceca3818"><code>a56acd4</code></a> Remove release workflow npm cache</li>
<li><a href="https://github.com/GrantBirki/comment/commit/f802ba8fc0cb98597304197afcbb85edd6d438a7"><code>f802ba8</code></a> Rename action version export</li>
<li>Additional commits viewable in <a href="https://github.com/grantbirki/comment/compare/3439715f0cf3b8fc29bf47be0e3226679c06c41a...937820f3623fd0e300294bcc64ac7577fc0ad4cc">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions
</details> |
dependencies
github_actions
CI
maintainer-merge
|
2/2 |
.github/workflows/build_template.yml,.github/workflows/maintainer_merge_wf_run.yml |
2 |
3 |
['github-actions', 'joneugster'] |
nobody |
9-14870 9 days ago |
25-12848 25 days ago |
25-12661 25 days |
| 41498 |
pepamontero author:pepamontero |
feat(Analysis/SpecificLimits/Normed): the sum ∑' n, n ^ k * r ^ n via Stirling numbers |
For `‖r‖ < 1`, compute `∑' n : ℕ, n ^ k * r ^ n` as the finite sum `∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j / (1 - r) ^ (j + 1)`, where `S(k, j)` are the Stirling numbers of the second kind.
**Motivation:** a special case of `tsum_sq_mul_geometric_of_norm_lt_one` over `ℂ` was proved in the FLT project and is generalized here to match the surrounding Mathlib API; the private FLT lemma can then be replaced by this one.
**Main additions to `Normed.lean`:**
- The general power formula:
- `hasSum_pow_mul_geometric_of_norm_lt_one'` / `tsum_pow_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n ^ k * r ^ n = ∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_pow_mul_geometric_of_norm_lt_one` / `tsum_pow_mul_geometric_of_norm_lt_one`: the same in a field, with `/ (1 - r) ^ (j + 1)`.
- The `descFactorial` special case that supplies each term of that sum:
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one'` / `tsum_descFactorial_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n.descFactorial j * r ^ n = j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one` / `tsum_descFactorial_mul_geometric_of_norm_lt_one`: the field versions, with `/ (1 - r) ^ (j + 1)`.
**Additions to other files:**
- `Combinatorics/Enumerative/Stirling.lean`: `Nat.pow_eq_sum_stirlingSecond_mul_descFactorial`, expressing every power `n ^ k` as a linear combination `n ^ k = ∑ j ∈ range (k + 1), stirlingSecond k j * n.descFactorial j`.
- `Data/Nat/Factorial/Basic.lean`: `Nat.descFactorial_mul_self`, the identity `n.descFactorial j * n = n.descFactorial (j + 1) + j * n.descFactorial j`, used in the induction proving the Stirling result above.
**Other changes:**
- `summable_pow_mul_geometric_of_norm_lt_one` (statement unchanged) is now a one-line consequence of the general formula; its previous proof via `ascPochhammer` is deleted, so the `RingTheory.Polynomial.Pochhammer` import is no longer needed.
- The statement of `summable_descFactorial_mul_geometric_of_norm_lt_one` changes from the shifted summand `(n + k).descFactorial k * r ^ n` to `n.descFactorial k * r ^ n`, to match the new `hasSum`/`tsum` lemmas. It had no other uses in Mathlib, and the shifted form is recoverable in one line from `summable_choose_mul_geometric_of_norm_lt_one`.
- The proof of `hasSum_coe_mul_geometric_of_norm_lt_one'` (`k = 1`) is simplified using the general formula, and the `k = 2` case is added: `∑' n, n ^ 2 * r ^ n = r * (1 + r) / (1 - r) ^ 3` (`hasSum_sq_mul_geometric_of_norm_lt_one'` and the three companion lemmas).
**Note**: redundant imports no longer needed because of changes to the code have not been removed yet since at least 5 other files depend on these as transitive imports.
**AI Disclosure**: this code originated in the FLT project, where an initial version was written by William Coram and Samuel Yin with AI assistance (Claude, later cleaned up with Codex). It has since been substantially rewritten for this PR; little of the original generated code remains.
Co-authored-by: Malhar A. Patel <142735852+Mal-Pat@users.noreply.github.com>
Co-authored-by: William Coram
Co-authored-by: Samuel Yin
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
t-analysis
maintainer-merge
|
195/83 |
Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/SpecialFunctions/OrdinaryHypergeometric.lean,Mathlib/Analysis/SpecialFunctions/Pochhammer.lean,Mathlib/Analysis/SpecialFunctions/PolynomialExp.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Basic.lean,Mathlib/Analysis/SpecificLimits/Normed.lean,Mathlib/Combinatorics/Enumerative/Stirling.lean,Mathlib/Data/Nat/Factorial/Basic.lean,Mathlib/InformationTheory/Coding/KraftMcMillan.lean,Mathlib/Topology/Instances/CantorSet.lean |
11 |
34 |
['Mal-Pat', 'YaelDillies', 'github-actions', 'grunweg', 'pepamontero'] |
nobody |
9-14333 9 days ago |
9-75337 9 days ago |
15-11700 15 days |
| 40510 |
felixpernegger author:felixpernegger |
refactor: reorganize Topology/EMetricSpace/Defs to generalise basic results |
This PR reorganizes the Topology/EMetricSpace/Defs so that various results that previously only held for `PseudoEMetricSpace` now also hold for `WeakPseudoEMetricSpace` (in particular ENNReal etc). This is a necessary stepping stone to generalise many definitions and theorems across mathlib to `WeakPseudoEMetricSpace`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
maintainer-merge
|
288/183 |
Mathlib.lean,Mathlib/Topology/EMetricSpace/Defs.lean,Mathlib/Topology/EMetricSpace/MulOpposite.lean,Mathlib/Topology/EMetricSpace/Weak.lean,Mathlib/Topology/MetricSpace/HausdorffDistance.lean,Mathlib/Topology/MetricSpace/IsometricSMul.lean,Mathlib/Topology/MetricSpace/Pseudo/Defs.lean |
7 |
28 |
['felixpernegger', 'github-actions', 'mathlib-bors', 'scholzhannah'] |
scholzhannah assignee:scholzhannah |
9-11254 9 days ago |
9-13171 9 days ago |
41-5381 41 days |
| 41813 |
sqrt-of-2 author:sqrt-of-2 |
feat(LinearAlgebra): totally nonnegative matrices |
Define totally nonnegative matrices and add a basic API.
A matrix is totally nonnegative if all its finite minors have nonnegative determinant.
From RealRooted
Co-authored-by: Yaël Dillies <yael.dillies@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
115/1 |
Mathlib.lean,Mathlib/Data/Set/Finite/Range.lean,Mathlib/LinearAlgebra/Matrix/Determinant/TotallyNonneg.lean,Mathlib/Order/Hom/Set.lean |
4 |
17 |
['Vierkantor', 'YaelDillies', 'github-actions', 'sqrt-of-2', 'vlad902'] |
nobody |
8-68613 8 days ago |
8-71488 8 days ago |
8-80896 8 days |
| 41849 |
ZRTMRH author:ZRTMRH |
feat(Combinatorics/Quiver/Path): add `Quiver.Reachable` |
Add `Quiver.Reachable a b`, the existence of a directed path from `a` to `b`, together with its basic preorder API (`@[refl]`/`@[trans]`) and `Path.reachable`/`Hom.reachable`.
Unlike `SimpleGraph.Reachable`, this is only a preorder, not an equivalence, since quiver paths are directed; the symmetric notion is reachability in `Symmetrify V`.
---
This will be used by #38310 (where it was suggested in review).
This PR was written with AI assistance (Claude). The code has been reviewed by the author.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
maintainer-merge
|
40/1 |
Mathlib/Combinatorics/Quiver/Path.lean |
1 |
16 |
['SnirBroshi', 'YaelDillies', 'ZRTMRH', 'github-actions', 'robin-carlier'] |
nobody |
8-46704 8 days ago |
8-50185 8 days ago |
9-36298 9 days |
| 33664 |
ooovi author:ooovi |
feat(Geometry/Convex/Cone/Pointed): face lattice of pointed cones |
- Define PointedCone.IsFaceOf, for a pointed cone being a face of another pointed cone.
- Prove some basic properties, that faces are extreme sets of their cone, and how they behave under intersection, map and product operations.
- Define `Face` by bundling the `IsFaceOf` structure, and show the complete lattice structure on it.
- Prove that taking the product of two faces is an order isomorphism.
Co-authored-by: Martin Winter
---
- [x] depends on: #33780 for the definition of the lineal space
- [x] depends on: #39185 for `isFaceOf`
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry
maintainer-merge
|
202/0 |
Mathlib.lean,Mathlib/Geometry/Convex/Cone/Face/Lattice.lean |
2 |
204 |
['YaelDillies', 'eric-wieser', 'github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'ooovi', 'vihdzp'] |
nobody |
6-27447 6 days ago |
6-28187 6 days ago |
12-22969 12 days |
| 37959 |
artie2000 author:artie2000 |
feat(LinearAlgebra/Dimension/Free): isomorphic to base ring iff rank is one |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
maintainer-merge
label:t-algebra$ |
18/10 |
Mathlib/LinearAlgebra/Dimension/Free.lean |
1 |
30 |
['artie2000', 'github-actions', 'mathlib-merge-conflicts', 'themathqueen'] |
themathqueen assignee:themathqueen |
5-26838 5 days ago |
6-5622 6 days ago |
28-65586 28 days |
| 41088 |
Brian-Nugent author:Brian-Nugent |
feat(Topology): sheafRestrict is a right adjoint |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
maintainer-merge
|
5/0 |
Mathlib/Topology/Sheaves/Over.lean |
1 |
3 |
['Brian-Nugent', 'github-actions', 'j-loreaux'] |
j-loreaux assignee:j-loreaux |
4-69246 4 days ago |
30-155 29 days ago |
29-86368 29 days |
| 41731 |
mpacholski author:mpacholski |
feat(Topology/Algebra/Module/Spaces/ContinuousLinearMap): convert `toLinearMap₁₂` to a linear map |
Convert the projection `toLinearMap₁₂` (which strips the topology from a continuous semibilinear map) to a linear map, by showing that it preserves addition and scalar multiplication. We also rename `toLinearMap₁₂_apply` to `toLinearMap₁₂_apply_apply_apply` without deprecation so that we can have `_apply` be a different lemma.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
tech debt
maintainer-merge
|
11/9 |
Mathlib/Analysis/Fourier/FourierTransformDeriv.lean,Mathlib/MeasureTheory/Measure/CharacteristicFunction/TaylorExpansion.lean,Mathlib/Topology/Algebra/Module/Spaces/ContinuousLinearMap.lean |
3 |
24 |
['github-actions', 'mpacholski', 'pechersky', 'themathqueen'] |
nobody |
4-6556 4 days ago |
7-79009 7 days ago |
9-36336 9 days |
| 41189 |
ADedecker author:ADedecker |
feat: define Fredholm operators between TVSs |
Project started during the May 2026 workshop "Techniques and Tools for the Formalization of Analysis" at ICERM.
Co-authored-by: Jon Bannon <jbannon@siena.edu>
Co-authored-by: Yongxi (Aaron) Lin <aaronlin@andrew.cmu.edu>
Co-authored-by: Patrick Massot <patrickmassot@free.fr>
Co-authored-by: Oliver Nash <github@olivernash.org>
Co-authored-by: Filippo A. E. Nuccio <filippo.nuccio@univ-st-etienne.fr>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [x] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39100
- [x] depends on: #41038
- [x] depends on: #41229
- [x] depends on: #41250
[](https://gitpod.io/from-referrer/)
|
t-analysis
maintainer-merge
|
380/0 |
Mathlib.lean,Mathlib/Algebra/Module/LinearMap/FiniteRange.lean,Mathlib/Analysis/Normed/Operator/Fredholm/Basic.lean |
3 |
61 |
['ADedecker', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'themathqueen'] |
themathqueen assignee:themathqueen |
3-16689 3 days ago |
4-11755 4 days ago |
9-67783 9 days |
| 41984 |
fpvandoorn author:fpvandoorn |
fix: typo in simps error messages |
* Remove trailing underscores in names `simps`-errors would erroneously print
* Restore Lean 3 error message tests.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
maintainer-merge
awaiting-author
|
46/27 |
Mathlib/Tactic/Simps/Basic.lean,MathlibTest/Simps.lean |
2 |
4 |
['Vierkantor', 'github-actions', 'grunweg'] |
nobody |
3-2577 3 days ago |
3-2577 3 days ago |
2-5055 2 days |
| 40724 |
justus-springer author:justus-springer |
feat(Analysis/InnerProductSpace): inner products on exterior powers |
Given a real inner product space `E`, we construct a canonical inner product on `⋀[ℝ]^n E` via the Gram determinant formula: on decomposable elements, `⟪v₁ ∧ ⋯ ∧ vₙ, w₁ ∧ ⋯ ∧ wₙ⟫ = det (⟪vⱼ, wᵢ⟫)ᵢⱼ`.
There are two generalizations of this construction: Going from `ℝ` to `RCLike`, and getting rid of the `FiniteDimensional` assumption. Both would require some prerequisites, hence they are left as future work for now (see the future work section of the module docstring).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
maintainer-merge |
159/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/ExteriorPower.lean,Mathlib/Analysis/InnerProductSpace/GramMatrix.lean |
3 |
16 |
['github-actions', 'justus-springer', 'mckoen', 'tb65536'] |
nobody |
3-1874 3 days ago |
3-2987 3 days ago |
38-16904 38 days |
| 41121 |
Scarlett-le author:Scarlett-le |
feat(Geometry/Euclidean/Angle): add the Alternate segment theorem |
Adds the Alternate segment theorem to`Mathlib/Geometry/Euclidean/Angle/Sphere.lean`:
if a line is tangent to a sphere `s` at `p₁`
and `p₁`, `p₂`, `p₃` lie on `s`, then twice the oriented angle from the tangent to the chord
`p₁p₂` equals twice the inscribed angle subtending `p₁p₂` at `p₃`. As elsewhere in this file,
the angles are doubled because the underlying oriented angles agree only mod `π`.
## Dependencies
- [x] depends on: #41143 |
t-euclidean-geometry
maintainer-merge
|
27/0 |
Mathlib/Geometry/Euclidean/Angle/Sphere.lean |
1 |
7 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
2-59414 2 days ago |
24-52087 24 days ago |
27-10754 27 days |
| 42027 |
loefflerd author:loefflerd |
chore(Data/FunLike): tag `IsApply` lemmas as simp |
The new `IsApply` typeclasses allow many existing special-case `coe_xxx` lemmas to be unified; but the general lemmas currently do not have the simp tag. This tags them as simp.
Other minor changes:
- There were two lemmas with statements identical up to argument order: `FunLike.coe_smul` (directly written) and `FunLike.coe_smul'` (auto-generated by `to_additive`). I unified these using `to_additive existing`, with a deprecation alias for `FunLike.coe_smul'`.
- Downstream code that uses `FunLike.coe_smul'` is adjusted appropriately (un-squeezing a couple of lengthy terminal `simp only`'s in the process).
- One more specific simp lemma downstream (`ContinuousLinearMap.coe_pow'`) is removed, because `simp` can now prove it using the `FunLike` simp lemmas. A misnamed lemma in this file, `ContinuousLinearMap.coe_pow`, was re-named to `ContinuousLinearMap.toLinearMap_pow`.
- There were just two simps (both in `Mathlib/Probability/Distributions/Gaussian/Basic.lean`) which broke, because they used an un-squeezed `simp` along with an additional explicitly provided lemma (not part of the default simp set) that conflicted with `FunLike.coe_zero`. These I fixed by explicitly removing `FunLike.coe_zero` from the simp set where necessary.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
maintainer-merge
|
44/50 |
Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Data/FunLike/IsApply.lean,Mathlib/LinearAlgebra/Eigenspace/ContinuousLinearMap.lean,Mathlib/MeasureTheory/VectorMeasure/SetIntegral.lean,Mathlib/NumberTheory/ModularForms/JacobiTheta/TwoVariable.lean,Mathlib/Probability/Distributions/Gaussian/Basic.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
7 |
17 |
['github-actions', 'leanprover-radar', 'loefflerd', 'mcdoll'] |
nobody |
2-31702 2 days ago |
2-38094 2 days ago |
3-15840 3 days |
| 39026 |
fpvandoorn author:fpvandoorn |
feat: add assume tactic |
Teaching tactic: `assume p` is short for `intro (_ : p)`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[Zulip thread](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Assume.20tactic/with/593477478)
[](https://gitpod.io/from-referrer/)
|
t-meta
awaiting-author
maintainer-merge
|
125/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Assume.lean,MathlibTest/Assume.lean |
4 |
12 |
['fpvandoorn', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
2-25337 2 days ago |
80-27300 80 days ago |
0-1 1 second |
| 41707 |
marcelolynch author:marcelolynch |
fix(cache): carry decompression pipeline state across download rounds |
`cache get` downloads files in multiple rounds (corresponding to azure containers, e.g. `master` then `forks` for a fork PR) and decompresses them in a pipeline while the download streams.
Each round started from a fresh pipeline state and the round loop kept only the last round's state, so some files queued for decompression plus the in-flight leantar batch was dropped: the .ltars were on disk but never unpacked, and the next lake build recompiled those modules.
The in-flight leantar was also never awaited, so it could still be writing build outputs while lake build read them.
Reported in https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/cache.20issues/with/609923362
The fix makes the pipeline state an explicit value threaded through the rounds: a DecompState structure (pending files, in-flight batch, counters) embedded in TransferState, and finalizeDecomp drain after the last round.
Also adds related tests in Cache/Test.lean. |
CI
maintainer-merge
|
164/58 |
Cache/Requests.lean,Cache/Test.lean |
2 |
6 |
['github-actions', 'joneugster', 'marcelolynch'] |
joneugster assignee:joneugster |
2-25178 2 days ago |
6-7476 6 days ago |
9-61229 9 days |
| 40468 |
BoltonBailey author:BoltonBailey |
feat(Data/Nat/Choose/Multinomial): add positivity support |
This PR adds `positivity` tactic support for `Multiset.multinomial`, by adding a `_pos` theorem and an extension.
This was done as a part of Project Numina's LeanTriathlon project. AI was used as an assistant in the creation of this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
maintainer-merge
|
24/0 |
Mathlib/Data/Nat/Choose/Multinomial.lean |
1 |
8 |
['BoltonBailey', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
2-23795 2 days ago |
5-81789 5 days ago |
42-4088 42 days |
| 41993 |
eneoli author:eneoli |
feat(Tactic/Linter/UnusedTactic): mark `isIgnoreTacticKind` and `addIgnoreTacticKind` as public |
Marks `isIgnoreTacticKind` and `addIgnoreTacticKind` in the `unusedTactic` linter as `public` definitions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
new-contributor
maintainer-merge
|
25/2 |
Mathlib/Tactic/Linter/UnusedTactic.lean,MathlibTest/Linter/UnusedTactic.lean |
2 |
5 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
2-13230 2 days ago |
4-75479 4 days ago |
4-75292 4 days |
| 41976 |
fpvandoorn author:fpvandoorn |
refactor(simps): centralize notation_class and initialize_simps_projections |
* Create a single file that declares all `notation_class` attributes and `initialize_simps_projections` calls for many structures in Core.
* Some of these notation classes were previously declared in `Tactic.Simps.Basic` or in other Mathlib files. The latter was problematic, because then you could have files that import `simps` and a Core structure, but not generate the right simp lemmas.
* Make sure that we import this file instead of the internal `Tactic.Simps.Basic` file throughout Mathlib. Not importing this file can cause `simps` to generate wrong lemmas.
* Also call `initialize_simps_projections` for (some) classes that are declared in Mathlib. (This is not super important, but ensures that these projections have to be only generated once, instead of in every file that imports it.)
* This was prompted by observing faulty behavior in #40653.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import
t-meta
maintainer-merge
|
170/36 |
Mathlib.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Notation/Defs.lean,Mathlib/CategoryTheory/Monoidal/Functor/Types.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/Subtype.lean,Mathlib/Data/TwoPointing.lean,Mathlib/Logic/Equiv/Defs.lean,Mathlib/Order/Defs/LinearOrder.lean,Mathlib/Order/Notation.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Common.lean,Mathlib/Tactic/ProdAssoc.lean,Mathlib/Tactic/ProxyType.lean,Mathlib/Tactic/Simps.lean,Mathlib/Tactic/Simps/Basic.lean,Mathlib/Tactic/Simps/NotationClass.lean,MathlibTest/Simps.lean,MathlibTest/TacticCheckInstancesSimps.lean |
19 |
3 |
['github-actions', 'joneugster'] |
nobody |
2-12651 2 days ago |
5-9933 5 days ago |
5-10018 5 days |
| 41488 |
artie2000 author:artie2000 |
feat(LinearAlgebra/Dimension/Free): division version of tower law |
Split from #37959
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
maintainer-merge
label:t-algebra$ |
22/0 |
Mathlib/LinearAlgebra/Dimension/Free.lean |
1 |
10 |
['artie2000', 'github-actions', 'tb65536', 'themathqueen'] |
nobody |
2-4071 2 days ago |
4-82382 4 days ago |
5-23588 5 days |
| 40663 |
Vierkantor author:Vierkantor |
feat: solve equalities of instances in `convert` |
This PR sets the `preTransparency` of `convert` to `.instances`, which means it will not run congruence on goals that already are equal at `.instances` transparency. In other words, `convert` (without exclamation) should leave no goals of the form `instA.toC = instB.toC`.
There are 387 (~ 8.5%) additional `convert!` calls in Mathlib that could become `convert` after this change, in addition to 2626 (~ 57,8%) where `convert` already succeeds at reducible transparency. I found no cases where `postTransparency := .instances` would be needed instead.
Full breakdown of stats, according to the test script below and passing the captured log messages to `sort | uniq -c`:
* 2626 `convert` would work
* 1513 `convert!` (i.e. `convert (postTransparency := .default)`) is required
* 387 `convert (preTransparency := .instances)` is required
* 16 cause an error in the test script
The test script consists of replacing the elaborator for `convert` with:
```lean
def sameGoals (gs₁ gs₂ : List MVarId) : MetaM Bool := do
if gs₁.length == gs₂.length then
try
(gs₁.zip gs₂).allM fun (g₁, g₂) => do
-- Check that they agree on the set of free variables, otherwise we get errors.
-- We assume the context in the `convert` case is a subset of the `convert!` case
-- since `convert!` can more agressively unfold and introduce more variables.
if !(← g₁.getDecl).lctx.isSubPrefixOf (← g₂.getDecl).lctx then return false
g₂.withContext <| withReducible <| isDefEq (← g₁.getType) (← g₂.getType)
catch _ => return false
else
return false
elab_rules : tactic
| `(tactic| convert $[!%$expensive]? $cfg $[←%$sym]? $term $[using $n]? $[with $ps?*]?) =>
withMainContext do
let actualConfig ← Convert.elabConfig expensive.isSome cfg
let cheapConfig ← Convert.elabConfig false cfg
let redConfig := { cheapConfig with
preTransparency := .reducible, postTransparency := .reducible }
let preInstConfig := { cheapConfig with
preTransparency := .instances, postTransparency := .reducible }
let postInstConfig := { cheapConfig with
postTransparency := .instances, preTransparency := .reducible }
let patterns := (ps?.getD #[]).toList
let expectedType ← mkFreshExprMVar (mkSort (← getLevel (← getMainTarget)))
let (e, gs) ← elabTermForConvert term expectedType
liftMetaTactic fun g ↦ do
-- Don't retain metavar assignments but do retain messages.
let msgs ← withoutModifyingState do
try
let actualGoals ← g.convert e sym.isSome (n.map (·.getNat)) actualConfig patterns
let redGoals ← g.convert e sym.isSome (n.map (·.getNat)) redConfig patterns
if ← sameGoals actualGoals redGoals then
logInfo m!"convert(reducible)"
else
let preInstGoals ← g.convert e sym.isSome (n.map (·.getNat)) preInstConfig patterns
if ← sameGoals actualGoals preInstGoals then
logInfo m!"convert(preInst)"
else
let postInstGoals ← g.convert e sym.isSome (n.map (·.getNat)) postInstConfig patterns
if ← sameGoals actualGoals postInstGoals then
logInfo m!"convert(postInst)"
else if expensive.isSome then
logInfo m!"convert(expensive)"
else
logInfo m!"convert(error)"
catch e =>
logInfo m!"convert(error {e.toMessageData})"
pure ()
Core.getMessageLog
Core.setMessageLog msgs
return (← g.convert e sym.isSome (n.map (·.getNat)) actualConfig patterns) ++ gs
```
---
Ideally we'd run a benchmark on this PR, or even better one that compares `preTransparency` and `postTransparency`. But we don't have a lot of calls to plain `convert` yet, since I'd want to wait for the migration until #38071 is merged.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
maintainer-merge
|
46/6 |
Mathlib/Algebra/GCDMonoid/Basic.lean,Mathlib/Analysis/SpecialFunctions/Log/InvLog.lean,Mathlib/Geometry/Euclidean/Incenter.lean,Mathlib/NumberTheory/ClassNumber/AdmissibleCardPowDegree.lean,Mathlib/Tactic/Convert.lean,MathlibTest/Tactic/Convert/Instances.lean |
6 |
20 |
['JovanGerb', 'Vierkantor', 'github-actions', 'joneugster', 'leanprover-radar'] |
joneugster and thorimur assignee:joneugster assignee:thorimur |
2-1241 2 days ago |
2-85537 2 days ago |
31-33378 31 days |
| 41487 |
Deicyde author:Deicyde |
feat: implement pi-base cross-reference attribute |
Adds a `@[pibase ID]` cross-reference attribute for canonical pi-base identifiers.
The parser accepts IDs of the form `P000001`, `S000023`, and `T000001`, and routes them to the corresponding `properties/`, `spaces/`, or `theorems/` page on `topology.pi-base.org`.
Tests cover docstring insertion, `#pibase_tags`, all three URL routes, and malformed IDs.
This PR was prepared with assistance from Codex. Based heavily on #41290 |
t-meta
LLM-generated
maintainer-merge
|
149/8 |
Mathlib/Tactic/CrossRefAttribute.lean,MathlibTest/CrossRefAttribute.lean |
2 |
20 |
['Deicyde', 'github-actions', 'joneugster', 'mathlib-merge-conflicts', 'thorimur', 'vlad902'] |
joneugster and thorimur assignee:joneugster assignee:thorimur |
1-78499 1 day ago |
1-79191 1 day ago |
11-22918 11 days |
| 40282 |
rosborn author:rosborn |
feat(Algebra/Group/Subgroup): add sup/iSup/biSup/sSup_characteristic |
The join of characteristic subgroups is characteristic.
---
These mirror the existing sup_normal/iSup_normal/biSup_normal/sSup_normal family in Subgroup/Pointwise.lean. I've left out the inf versions and extras like the characteristic closure until there's a use for them; they're easy to add later.
Discussed here: [Zulip](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Additional.20Group.20Theory.20Lemmas/with/600714666)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
|
t-algebra
maintainer-merge
label:t-algebra$ |
40/0 |
Mathlib/Algebra/Group/Subgroup/Basic.lean |
1 |
21 |
['SnirBroshi', 'adomani', 'github-actions', 'mathlib-merge-conflicts', 'rosborn', 'themathqueen'] |
themathqueen assignee:themathqueen |
1-78311 1 day ago |
3-67446 3 days ago |
41-9882 41 days |
| 39371 |
fpvandoorn author:fpvandoorn |
feat: tag lemmas with compactness and closedness |
---
- [x] depends on: #39370
[](https://gitpod.io/from-referrer/)
|
t-meta
t-topology
maintainer-merge
|
88/11 |
Mathlib/Topology/Basic.lean,Mathlib/Topology/Closure.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/MetricSpace/ProperSpace.lean,Mathlib/Topology/Order/Compact.lean,Mathlib/Topology/Order/OrderClosed.lean,Mathlib/Topology/Separation/Basic.lean,Mathlib/Topology/Separation/Hausdorff.lean,MathlibTest/Compactness.lean |
9 |
4 |
['github-actions', 'joneugster', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
joneugster assignee:joneugster |
1-77551 1 day ago |
5-10489 5 days ago |
5-10303 5 days |
| 41877 |
BoltonBailey author:BoltonBailey |
feat(Algebra/Order/Floor/Ring): `positivity` for `Int.fract` |
This PR adds a positivity extension for `Int.fract`, which is always nonnegative.
I used Claude Code to prepare this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
t-meta
maintainer-merge
label:t-algebra$ |
16/0 |
Mathlib/Algebra/Order/Floor/Ring.lean,MathlibTest/positivity.lean |
2 |
2 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
1-74210 1 day ago |
8-60917 8 days ago |
8-61773 8 days |
| 40298 |
xroblot author:xroblot |
feat(Algebra/Algebra): reinterpret a RingEquiv as a ℕ/ℤ/ℚ-algebra isomorphism |
Adds the `RingEquiv` analogues of the `RingHom.to{Nat,Int,Rat}AlgHom` / `RingHom.equivRatAlgHom` constructions, over `ℕ`, `ℤ` and `ℚ`:
- `RingEquiv.toNatAlgEquiv`, `RingEquiv.toIntAlgEquiv`, `RingEquiv.toRatAlgEquiv`: a `RingEquiv` is canonically an ℕ-, ℤ- or ℚ-algebra isomorphism.
- `ringEquivEquivNatAlgEquiv`, `ringEquivEquivIntAlgEquiv`, `ringEquivEquivRatAlgEquiv`: the corresponding equivalences `(R ≃+* S) ≃ (R ≃ₐ[·] S)`.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra
maintainer-merge
label:t-algebra$ |
111/14 |
Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/Algebra/Algebra/Hom/Rat.lean |
2 |
56 |
['github-actions', 'plp127', 'themathqueen', 'xroblot'] |
themathqueen assignee:themathqueen |
1-54578 1 day ago |
3-36988 3 days ago |
45-61716 45 days |
| 38200 |
Parcly-Taxel author:Parcly-Taxel |
feat: Turán numbers and their strict monotonicity |
`strictMonoOn_turanNumber` was initially proved by @Aristotle-Harmonic, then hand-polished.
Co-authored-by: Aristotle (Harmonic) <aristotle-harmonic@harmonic.fun> |
t-combinatorics
tech debt
maintainer-merge
|
45/20 |
Mathlib/Combinatorics/SimpleGraph/Extremal/Turan.lean |
1 |
9 |
['Parcly-Taxel', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
1-43755 1 day ago |
1-44391 1 day ago |
95-20109 95 days |
| 37685 |
vihdzp author:vihdzp |
feat: Fodor's lemma |
We define stationary sets and prove Fodor's lemma, following the proof at Wikipedia.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39727
I'm surprised that this has a [Wikipedia article](https://en.wikipedia.org/wiki/Fodor%27s_lemma) but isn't listed in 1000.yaml. Is it just because the name has "lemma" instead of "theorem"?
[](https://gitpod.io/from-referrer/)
|
t-set-theory
t-order
large-import
maintainer-merge
|
70/3 |
Mathlib/SetTheory/Cardinal/Cofinality/Club.lean,Mathlib/SetTheory/Ordinal/Basic.lean |
2 |
16 |
['YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'staroperator', 'vihdzp'] |
nobody |
1-43702 1 day ago |
2-40862 2 days ago |
2-75733 2 days |
| 38227 |
vihdzp author:vihdzp |
chore(Algebra/Order/Monoid/Unbundled/Basic): golfing + formatting |
We make use of `variable`, fix some weird spacing, and golf many proofs.
The only breaking change is that `mul_lt_iff_lt_one_left'`/`add_lt_iff_neg_left` now takes an explicit argument, matching the theorems surrounding it.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Not too fond of the `calc` tactic.
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-order
maintainer-merge
label:t-algebra$ |
233/501 |
Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean |
2 |
9 |
['YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
1-42459 1 day ago |
1-80803 1 day ago |
27-875 27 days |
| 38319 |
Zetetic-Dhruv author:Zetetic-Dhruv |
feat(Combinatorics/SetFamily): Assouad's dual VC bound |
Adds the Finset-level form of Assouad's 1983 dual VC bound: if a family
`𝒜 : Finset (Finset α)` has VC dimension at most `d`, then for any
ground set `X : Finset α` the dual family
`{𝒜.filter (· ∋ x) : x ∈ X}` has VC dimension at most `2 ^ (d + 1) - 1`.
New declarations (in `Finset` namespace):
- `dualFamily 𝒜 X`: for each `x ∈ X`, the subfamily `{A ∈ 𝒜 | x ∈ A}`
- `mem_dualFamily` (`@[simp]`): membership characterisation
- `exists_shatters_of_dualFamily_shatters`: Assouad's bitstring-coding lemma
- `vcDim_dualFamily_le`: the headline VC bound
Proof by Assouad's classical bitstring-coding argument. Sits on top of `Finset.shatterer` / `Finset.vcDim` from
`Mathlib.Combinatorics.SetFamily.Shatter`.
References:
- P. Assouad, Densite et dimension, Ann. Inst. Fourier 33(3) (1983), Thm 2.13
- J. Matousek, Lectures on Discrete Geometry, GTM 212, Springer, 2002, Section 10.3 Lemma 10.3.3
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
maintainer-merge
|
199/0 |
Mathlib.lean,Mathlib/Combinatorics/SetFamily/DualVC.lean,docs/references.bib |
3 |
44 |
['Shreyas4991', 'YaelDillies', 'Zetetic-Dhruv', 'github-actions'] |
b-mehta assignee:b-mehta |
1-41857 1 day ago |
77-72041 77 days ago |
94-32503 94 days |
| 42074 |
felixpernegger author:felixpernegger |
chore(Dynamics): fix defs with underscore |
This PR deprecates all (1) defs with underscore in Dynamics and renames it according to the naming convention.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-dynamics
tech debt
maintainer-merge
|
7/4 |
Mathlib/Dynamics/TopologicalEntropy/Subset.lean |
1 |
2 |
['github-actions', 'grunweg'] |
ADedecker assignee:ADedecker |
1-32628 1 day ago |
1-65375 1 day ago |
1-65725 1 day |
| 42073 |
felixpernegger author:felixpernegger |
chore(FieldTheory): fix defs with underscores |
This PR deprecates all (1) defs with underscore in FieldTheory and renames it according to the naming convention.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
easy
maintainer-merge
label:t-algebra$ |
7/4 |
Mathlib/FieldTheory/Differential/Liouville.lean,Mathlib/FieldTheory/Galois/Basic.lean,Mathlib/FieldTheory/IntermediateField/Basic.lean,Mathlib/FieldTheory/LinearDisjoint.lean |
4 |
3 |
['felixpernegger', 'github-actions', 'grunweg'] |
nobody |
1-32611 1 day ago |
1-65542 1 day ago |
1-66318 1 day |
| 42054 |
yuanyi-350 author:yuanyi-350 |
refactor: generalize `Module.Finite.of_surjective` to arbitrary ring homomorphisms |
|
t-ring-theory
maintainer-merge
|
9/10 |
Mathlib/RingTheory/Finiteness/Basic.lean |
1 |
4 |
['github-actions', 'themathqueen'] |
nobody |
1-17878 1 day ago |
2-36789 2 days ago |
2-36602 2 days |
| 41965 |
bryangingechen author:bryangingechen |
ci: retire legacy zulip emoji workflows, enable emojis on mathlib4-nightly-testing |
This PR replaces our existing zulip emoji reaction workflows with new triggers in the new "reconciliation" workflow (`zulip_emoji_reconcile.yml`) added in #41852.
Deleted workflows:
- `zulip_emoji_ci_status.yaml`: handles CI status reactions. Replaced with `workflow_run` trigger.
- `zulip_emoji_closed_pr.yaml`: handles reactions for closed / reopened PRs. Replaced with `pull_request_target` `closed` and `reopened` triggers.
- `zulip_emoji_labelling.yaml`: handles reactions for awaiting-author and maintainer-merge labels. Replaced with `pull_request_target` `labeled` and `unlabeled` triggers.
- `zulip_emoji_merge_delegate.yaml`: handles reactions for PRs merged into `master`. Replaced with `pull_request_target` `closed` and `reopened` triggers.
The Zulip reaction steps have also been removed from `maintainer_bors_wf_run.yml` which now just handles labels: that label event then triggers the reconciliation workflow rather than handling the reactions on its own.
This PR also adds and wires in a configuration file for `mathlib4-nightly-testing` so that reactions for `nightly#XXX` PRs are also managed.
Prepared with Claude code.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
CI
LLM-generated
file-removed
maintainer-merge
|
159/348 |
.github/workflows/maintainer_bors_wf_run.yml,.github/workflows/zulip_emoji_ci_status.yaml,.github/workflows/zulip_emoji_closed_pr.yaml,.github/workflows/zulip_emoji_labelling.yaml,.github/workflows/zulip_emoji_merge_delegate.yaml,.github/workflows/zulip_emoji_reconcile.yml,.github/zulip-emoji-config-nightly.json,docs/workflows.md |
8 |
3 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
1-12565 1 day ago |
5-50762 5 days ago |
5-50575 5 days |
| 42089 |
mathlib-splicebot author:mathlib-splicebot |
fix(LinearAlgebra/Matrix/Notation): fix defeq abuse in lemma |
---
This PR was automatically created from PR #39161 by @alreadydone via a [review comment](https://github.com/leanprover-community/mathlib4/pull/39161#discussion_r3650515623) by @themathqueen. |
t-algebra
easy
maintainer-merge
label:t-algebra$ |
1/1 |
Mathlib/LinearAlgebra/Matrix/Notation.lean |
1 |
3 |
['github-actions', 'themathqueen'] |
nobody |
1-2484 1 day ago |
1-4141 1 day ago |
1-3954 1 day |
| 40389 |
YaelDillies author:YaelDillies |
feat(MeasureTheory): the average of a sum of functions |
and other basic lemmas about `average`
From MeanFourier
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
maintainer-merge
|
88/24 |
Mathlib/Analysis/Convex/Integral.lean,Mathlib/MeasureTheory/Integral/Average.lean |
2 |
7 |
['EtienneC30', 'YaelDillies', 'github-actions'] |
nobody |
0-59422 16 hours ago |
46-36671 46 days ago |
46-53486 46 days |
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Updated |
Last status change |
total time in review |
| 17623 |
astrainfinita author:astrainfinita |
feat(Algebra/Order/GroupWithZero/Unbundled): add some lemmas |
Some lemmas in `Algebra.Order.GroupWithZero.Unbundled` have incorrect or unsatisfactory names, or assumptions that can be omitted using `ZeroLEOneClass`. The lemmas added in this PR are versions of existing lemmas that use the correct or better name or `ZeroLEOneClass` to omit an assumption. The original lemmas will be deprecated in #17593.
| New name | Old name |
|-------------------------|-------------------------|
| `mul_le_one_left₀` | `Left.mul_le_one_of_le_of_le` |
| `mul_lt_one_of_le_of_lt_left₀` (`0 ≤ ·` version) / `mul_lt_one_of_le_of_lt_of_pos_left` | `Left.mul_lt_of_le_of_lt_one_of_pos` |
| `mul_lt_one_of_lt_of_le_left₀` | `Left.mul_lt_of_lt_of_le_one_of_nonneg` |
| `mul_le_one_right₀` | `Right.mul_le_one_of_le_of_le` |
| `mul_lt_one_of_lt_of_le_right₀` (`0 ≤ ·` version) / `mul_lt_one_of_lt_of_le_of_pos_right` | `Right.mul_lt_one_of_lt_of_le_of_pos` |
| `mul_lt_one_of_le_of_lt_right₀` | `Right.mul_lt_one_of_le_of_lt_of_nonneg` |
The following lemmas use `ZeroLEOneClass`.
| New name | Old name |
|-------------------------|-------------------------|
| `(Left.)one_le_mul₀` | `Left.one_le_mul_of_le_of_le` |
| `Left.one_lt_mul_of_le_of_lt₀` | `Left.one_lt_mul_of_le_of_lt_of_pos` |
| `Left.one_lt_mul_of_lt_of_le₀` | `Left.lt_mul_of_lt_of_one_le_of_nonneg` / `one_lt_mul_of_lt_of_le` (still there) |
| `(Left.)one_lt_mul₀` | |
| `Right.one_le_mul₀` | `Right.one_le_mul_of_le_of_le` |
| `Right.one_lt_mul_of_lt_of_le₀` | `Right.one_lt_mul_of_lt_of_le_of_pos` |
| `Right.one_lt_mul_of_le_of_lt₀` | `Right.one_lt_mul_of_le_of_lt_of_nonneg` / `one_lt_mul_of_le_of_lt` (still there) / `one_lt_mul` (still there) |
| `Right.one_lt_mul₀` | `Right.one_lt_mul_of_lt_of_lt` |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Split from #17593.
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
awaiting-zulip
t-order
label:t-algebra$ |
146/44 |
Mathlib/Algebra/Order/GroupWithZero/Canonical.lean,Mathlib/Algebra/Order/GroupWithZero/Unbundled.lean |
2 |
11 |
['YaelDillies', 'astrainfinita', 'github-actions', 'j-loreaux'] |
nobody |
613-18807 1 year ago |
620-11366 620 days ago |
33-64877 33 days |
| 15654 |
TpmKranz author:TpmKranz |
feat(Computability): language-preserving maps between NFA and RE |
Map REs to NFAs via Thompson's construction and NFAs to REs using GNFAs
Last chunk of #12648
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #15651
- [ ] depends on: #15649
[](https://gitpod.io/from-referrer/)
|
blocked-by-other-PR
new-contributor
t-computability
merge-conflict
awaiting-zulip
|
985/2 |
Mathlib.lean,Mathlib/Computability/GNFA.lean,Mathlib/Computability/Language.lean,Mathlib/Computability/NFA.lean,Mathlib/Computability/RegularExpressions.lean,Mathlib/Data/FinEnum/Option.lean,docs/references.bib |
7 |
3 |
['github-actions', 'meithecatte'] |
nobody |
446-68484 1 year ago |
716-5269 716 days ago |
0-179 2 minutes |
| 17458 |
urkud author:urkud |
refactor(Algebra/Group): make `IsUnit` a typeclass |
Also change some lemmas to assume `[IsUnit _]` instead of `[Invertible _]`.
Motivated by potential non-defeq diamonds in #14986, see also [Zulip](https://leanprover.zulipchat.com/#narrow/stream/116395-maths/topic/Invertible.20and.20data)
I no longer plan to merge this PR, but I'm going to cherry-pick some changes to a new PR before closing this one.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebra
awaiting-zulip
label:t-algebra$ |
82/72 |
Mathlib/Algebra/CharP/Invertible.lean,Mathlib/Algebra/Group/Invertible/Basic.lean,Mathlib/Algebra/Group/Units/Defs.lean,Mathlib/Algebra/GroupWithZero/Invertible.lean,Mathlib/Algebra/GroupWithZero/Units/Basic.lean,Mathlib/Algebra/Polynomial/Degree/Units.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Analysis/Convex/Segment.lean,Mathlib/Analysis/Normed/Affine/Isometry.lean,Mathlib/Analysis/Normed/Ring/Units.lean,Mathlib/CategoryTheory/Linear/Basic.lean,Mathlib/FieldTheory/Finite/Basic.lean,Mathlib/FieldTheory/Separable.lean,Mathlib/FieldTheory/SeparableDegree.lean,Mathlib/GroupTheory/Submonoid/Inverses.lean,Mathlib/LinearAlgebra/AffineSpace/AffineEquiv.lean,Mathlib/LinearAlgebra/AffineSpace/Combination.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Contraction.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Inversion.lean,Mathlib/LinearAlgebra/CliffordAlgebra/SpinGroup.lean,Mathlib/LinearAlgebra/Eigenspace/Minpoly.lean,Mathlib/NumberTheory/MulChar/Basic.lean,Mathlib/RingTheory/Localization/NumDen.lean,Mathlib/RingTheory/Polynomial/Content.lean,Mathlib/RingTheory/Polynomial/GaussLemma.lean,Mathlib/RingTheory/Valuation/Basic.lean |
26 |
12 |
['MichaelStollBayreuth', 'acmepjz', 'eric-wieser', 'github-actions', 'leanprover-bot', 'leanprover-community-bot-assistant', 'urkud'] |
nobody |
386-48833 1 year ago |
657-82876 657 days ago |
0-66650 18 hours |
| 25218 |
kckennylau author:kckennylau |
feat(AlgebraicGeometry): Tate normal form of elliptic curves |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-algebraic-geometry
awaiting-zulip
new-contributor
|
291/26 |
Mathlib.lean,Mathlib/AlgebraicGeometry/EllipticCurve/IsomOfJ.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Modular/TateNormalForm.lean,Mathlib/AlgebraicGeometry/EllipticCurve/NormalForms.lean,Mathlib/AlgebraicGeometry/EllipticCurve/VariableChange.lean |
5 |
31 |
['MichaelStollBayreuth', 'Multramate', 'acmepjz', 'github-actions', 'grunweg', 'kckennylau', 'leanprover-community-bot-assistant'] |
nobody |
386-47671 1 year ago |
419-22788 419 days ago |
6-44783 6 days |
| 28803 |
astrainfinita author:astrainfinita |
refactor: unbundle algebra from `ENormed*` |
Further speed up the search in the algebraic typeclass hierarchy by avoiding searching for `TopologicalSpace`.
This PR continues the work from #23961.
- Change `ESeminormed(Add)Monoid` and `ENormed(Add)Monoid` so they no longer carry algebraic data.
- Deprecate `ESeminormed(Add)CommMonoid` and `ENormed(Add)CommMonoid` in favor of `ESeminormed(Add)Monoid` and `ENormed(Add)Monoid` with a commutative algebraic typeclass.
|Old|New|
|---|---|
| `[ESeminormed(Add)(Comm)Monoid E]` | `[(Add)(Comm)Monoid E] [ESeminormed(Add)Monoid E]` |
| `[ENormed(Add)(Comm)Monoid]` | `[(Add)(Comm)Monoid E] [ENormed(Add)Monoid]` |
See [Zulip discussion](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/.2328803.20refactor.3A.20unbundle.20algebra.20from.20.60ENormed*.60/with/536024350)
------------
- [x] depends on: #28813 |
t-algebra
merge-conflict
slow-typeclass-synthesis
awaiting-zulip
t-analysis
label:t-algebra$ |
80/63 |
Mathlib/Analysis/CStarAlgebra/CStarMatrix.lean,Mathlib/Analysis/Normed/Group/Basic.lean,Mathlib/Analysis/Normed/Group/Continuity.lean,Mathlib/Analysis/Normed/Group/InfiniteSum.lean,Mathlib/Analysis/NormedSpace/IndicatorFunction.lean,Mathlib/MeasureTheory/Function/L1Space/AEEqFun.lean,Mathlib/MeasureTheory/Function/L1Space/HasFiniteIntegral.lean,Mathlib/MeasureTheory/Function/L1Space/Integrable.lean,Mathlib/MeasureTheory/Function/LocallyIntegrable.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Function/LpSeminorm/CompareExp.lean,Mathlib/MeasureTheory/Function/LpSeminorm/TriangleInequality.lean,Mathlib/MeasureTheory/Integral/IntegrableOn.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/Basic.lean |
14 |
28 |
['astrainfinita', 'bryangingechen', 'github-actions', 'grunweg', 'kbuzzard', 'leanprover-bot', 'mathlib-bors', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'sgouezel'] |
grunweg assignee:grunweg |
326-63316 10 months ago |
335-14470 335 days ago |
0-19882 5 hours |
| 28925 |
grunweg author:grunweg |
chore: remove `linear_combination'` tactic |
When `linear_combination` was refactored in #15899, the old code was kept as the `linear_combination'` tactic, for easier migration. The consensus of the zulip discussion ([#mathlib4 > Narrowing the scope of `linear_combination` @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Narrowing.20the.20scope.20of.20.60linear_combination.60/near/470237816)) was to wait, and "revisit this once people have experienced the various tactics in practice".
One year later, the old tactic has almost no uses: it is unused in mathlib; [searching on github](https://github.com/search?q=linear_combination%27%20path%3A*.lean&type=code) yields 37 hits --- all of which are in various forks of mathlib. Thus, removing this tactic seems appropriate.
---
Do not merge before the zulip discussion has concluded!
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
merge-conflict
file-removed
awaiting-zulip
|
0/564 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/LinearCombination'.lean,Mathlib/Tactic/Linter/UnusedTactic.lean,MathlibTest/linear_combination'.lean |
5 |
4 |
['euprunin', 'github-actions', 'grunweg', 'mathlib4-merge-conflict-bot'] |
nobody |
283-40526 9 months ago |
334-72323 334 days ago |
0-1 1 second |
| 30150 |
imbrem author:imbrem |
feat(CategoryTheory/Monoidal): to_additive for MonoidalCategory |
Add `AddMonoidalCategory`, the additive version of `MonoidalCategory`.
To get this to work, I needed to _remove_ the `to_additive` attributes in `Discrete.lean`, since existing code relies on the `AddMonoid M → MonoidalCategory M` instance. For now, we simply implement the additive variants by hand instead.
---
As discussed in #28718; I added an `AddMonoidalCategory` struct and tagged `MonoidalCategory` with `to_additive`, along with the lemmas in `Category.lean`.
I think this is the right approach, since under this framework the "correct" additive version of `Discrete.lean` would be mapping an `AddMonoid` to an `AddMonoidalCategory`.
Next steps would be to:
- Make `monoidal_coherence` and `coherence` support `AddMonoidalCategory`
- Add `CocartesianMonoidalCategory` extending `AddMonoidalCategory`
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
large-import
new-contributor
merge-conflict
awaiting-zulip
t-meta
|
444/125 |
Mathlib/CategoryTheory/Monoidal/Category.lean,Mathlib/CategoryTheory/Monoidal/Discrete.lean,Mathlib/Tactic/ToAdditive/GuessName.lean |
3 |
22 |
['JovanGerb', 'YaelDillies', 'github-actions', 'imbrem', 'mathlib4-merge-conflict-bot'] |
nobody |
255-51400 8 months ago |
295-30066 295 days ago |
1-160 1 day |
| 15651 |
TpmKranz author:TpmKranz |
feat(Computability/NFA): operations for Thompson's construction |
Lays the groundwork for a proof of equivalence of RE and NFA, w.r.t. described language. Actual connection to REs comes later, after the groundwork for the opposite direction has been laid.
Third chunk of #12648
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-computability
merge-conflict
awaiting-author
awaiting-zulip
|
307/5 |
Mathlib/Computability/NFA.lean |
1 |
27 |
['TpmKranz', 'YaelDillies', 'dupuisf', 'github-actions', 'leanprover-community-bot-assistant', 'meithecatte', 'rudynicolop'] |
nobody |
250-68532 8 months ago |
670-9520 670 days ago |
45-84611 45 days |
| 15649 |
TpmKranz author:TpmKranz |
feat(Computability): introduce Generalised NFA as bridge to Regular Expression |
Lays the groundwork for a proof of equivalence of NFA and RE, w.r.t. described language. Actual connection to NFA comes later, after the groundwork for the opposite direction has been laid.
Second chunk of #12648
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #15647 [Data.FinEnum.Option unchanged since then]
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-computability
merge-conflict
awaiting-author
awaiting-zulip
|
298/0 |
Mathlib.lean,Mathlib/Computability/GNFA.lean,Mathlib/Computability/Language.lean,Mathlib/Computability/RegularExpressions.lean,docs/references.bib |
5 |
7 |
['github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'meithecatte', 'trivial1711'] |
nobody |
249-84773 8 months ago |
595-48303 595 days ago |
23-54870 23 days |
| 20648 |
anthonyde author:anthonyde |
feat: formalize regular expression -> εNFA |
The file `Computability/RegularExpressionsToEpsilonNFA.lean` contains a formal definition of Thompson's method for constructing an `εNFA` from a `RegularExpression` and a proof of its correctness.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #20644
- [x] depends on: #20645
[](https://gitpod.io/from-referrer/)
|
merge-conflict
t-computability
awaiting-zulip
new-contributor
|
490/0 |
Mathlib.lean,Mathlib/Computability/RegularExpressionsToEpsilonNFA.lean,docs/references.bib |
3 |
7 |
['anthonyde', 'github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'meithecatte', 'qawbecrdtey'] |
nobody |
249-35541 8 months ago |
446-68470 446 days ago |
75-77754 75 days |
| 11800 |
JADekker author:JADekker |
feat: KappaLindelöf spaces |
Define KappaLindelöf spaces by following the first one-third of the API for Lindelöf spaces. The remainder will be added in a future PR.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
please-adopt
merge-conflict
t-topology
awaiting-zulip
|
301/2 |
Mathlib.lean,Mathlib/Topology/Compactness/KappaLindelof.lean,Mathlib/Topology/Compactness/Lindelof.lean |
3 |
38 |
['ADedecker', 'JADekker', 'PatrickMassot', 'StevenClontz', 'adomani', 'github-actions', 'grunweg', 'kim-em', 'urkud'] |
nobody |
249-7407 8 months ago |
724-27689 724 days ago |
123-25636 123 days |
| 33368 |
urkud author:urkud |
feat: define `Complex.UnitDisc.shift` |
Also review the existing API
UPD: I'm going to define a `PSL(2, Real)` action instead.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
t-analysis
awaiting-zulip
merge-conflict
|
273/39 |
Mathlib.lean,Mathlib/Analysis/Complex/UnitDisc/Basic.lean,Mathlib/Analysis/Complex/UnitDisc/Shift.lean |
3 |
7 |
['github-actions', 'j-loreaux', 'mathlib4-merge-conflict-bot', 'sgouezel', 'urkud'] |
j-loreaux assignee:j-loreaux |
200-43966 6 months ago |
201-4299 201 days ago |
7-33574 7 days |
| 20238 |
maemre author:maemre |
feat(Computability/DFA): Closure of regular languages under some set operations |
This shows that regular languages are closed under complement and intersection by constructing DFAs for them.
---
Closure under all other operations will be proved when someone adds the proof for DFA<->regular expression equivalence, so they are not part of this PR.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-computability
merge-conflict
awaiting-author
awaiting-zulip
|
159/0 |
Mathlib/Computability/DFA.lean,Mathlib/Computability/Language.lean |
2 |
60 |
['EtienneC30', 'YaelDillies', 'github-actions', 'maemre', 'mathlib4-merge-conflict-bot', 'meithecatte', 'urkud'] |
nobody |
150-28775 5 months ago |
496-6714 496 days ago |
48-67492 48 days |
| 22361 |
rudynicolop author:rudynicolop |
feat(Computability/NFA): nfa closure properties |
Add the closure properties union, intersection and reversal for NFA.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-computability
merge-conflict
awaiting-author
awaiting-zulip
|
218/2 |
Mathlib/Computability/Language.lean,Mathlib/Computability/NFA.lean |
2 |
91 |
['EtienneC30', 'b-mehta', 'ctchou', 'github-actions', 'leanprover-community-bot-assistant', 'meithecatte', 'rudynicolop'] |
nobody |
150-28759 5 months ago |
447-10653 447 days ago |
39-60738 39 days |
| 23929 |
meithecatte author:meithecatte |
feat(Computability/NFA): improve bound on pumping lemma |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #25321
[](https://gitpod.io/from-referrer/)
|
t-computability
awaiting-zulip
new-contributor
awaiting-author
|
101/10 |
Mathlib/Computability/EpsilonNFA.lean,Mathlib/Computability/NFA.lean |
2 |
42 |
['YaelDillies', 'dagurtomas', 'github-actions', 'leanprover-community-bot-assistant', 'mathlib4-dependent-issues-bot', 'meithecatte'] |
nobody |
149-48788 4 months ago |
413-78087 413 days ago |
34-10092 34 days |
| 35524 |
grunweg author:grunweg |
feat: text-based linter against \t followed by tactic mode |
Wait for the zulip discussion to converge. **If** there is consensus in favour of this change, summarise the motivation here.
[zulip discuss](https://leanprover.zulipchat.com/#narrow/channel/345428-mathlib-reviewers/topic/proposal.3A.20no.20more.20use.20of.20.60.E2.96.B8.60.20in.20Mathlib.3F/with/574680826)
---
There are currently 80 remaining exceptions in mathlib: ideally, these would get fixed before merging this.
Works best when combined with #35523.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
awaiting-zulip
merge-conflict
|
23/2 |
Mathlib/Tactic/Linter/TextBased.lean |
1 |
5 |
['github-actions', 'grunweg', 'joneugster', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
130-66540 4 months ago |
157-27702 157 days ago |
0-187 3 minutes |
| 36890 |
vihdzp author:vihdzp |
chore(SetTheory): `le_mul_left` → `le_mul_of_pos_left` |
The new theorem names/statements match [`Nat.le_mul_of_pos_left`](https://leanprover-community.github.io/mathlib4_docs/Init/Data/Nat/Lemmas.html#Nat.le_mul_of_pos_left). The cardinal one has also been moved to an earlier file.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory
awaiting-zulip
merge-conflict
|
28/23 |
Mathlib/SetTheory/Cardinal/Arithmetic.lean,Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Cardinal/Free.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Exponential.lean,Mathlib/SetTheory/Ordinal/Notation.lean |
6 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
125-38944 4 months ago |
128-25684 128 days ago |
0-10825 3 hours |
| 35578 |
Shreyas4991 author:Shreyas4991 |
fix: writer monad should use an additive logging type |
The Writer monad's w type is supposed to be additive, not multiplicative. This is how it is conceptually used in Haskell (as a logging type). Haskell uses `Monoid` because it doesn't make a distinction between `AddMonoid` and `Monoid`.
[#mathlib4 > Writer should use an additive monoid @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Writer.20should.20use.20an.20additive.20monoid/near/574990415)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
awaiting-zulip
merge-conflict
|
10/10 |
Mathlib/Control/Monad/Cont.lean,Mathlib/Control/Monad/Writer.lean |
2 |
5 |
['Shreyas4991', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
121-49419 3 months ago |
155-69937 155 days ago |
0-18707 5 hours |
| 30750 |
SnirBroshi author:SnirBroshi |
feat(Data/Quot): `toSet` and `equivClassOf` |
Define `toSet` which gets the set corresponding to an element of a quotient, and `equivClassOf` which gets the equivalence class of an element under a quotient.
---
I found these definitions helpful when working with quotients, specifically `ConnectedComponents` of a `TopologicalSpace`.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
awaiting-author
awaiting-zulip
|
162/0 |
Mathlib/Data/Quot.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/SetLike/Basic.lean,Mathlib/Data/Setoid/Basic.lean |
4 |
8 |
['SnirBroshi', 'TwoFX', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'wrenna-robson'] |
TwoFX assignee:TwoFX |
103-20928 3 months ago |
241-34329 241 days ago |
35-84279 35 days |
| 26299 |
adomani author:adomani |
perf: the `whitespace` linter only acts on modified files |
Introduces an `IO.Ref` to allow the `commandStart` linter to only run on files that git considers modified with respect to `master`.
The linter is also active on files that have had some error, as these are likely being modified!
The PR should also mitigate the speed-up that the linter introduced:
[#mathlib4 > A whitespace linter @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/A.20whitespace.20linter/near/525091877)
Assuming that this goes well, a similar mechanism could be applied to several linters that do not need to run on all code, just on the modified code.
Implementation detail: the linter is currently either on or off in "whole" files. It may be also a future development to make this more granular and only run the linter on "modifed commands in modified files", but this is not currently the plan for this modification!
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
awaiting-zulip
awaiting-author
|
55/7 |
Mathlib/Tactic/Linter/Whitespace.lean |
1 |
20 |
['adomani', 'eric-wieser', 'github-actions', 'grunweg', 'joneugster', 'kim-em', 'leanprover-bot', 'leanprover-radar', 'mathlib-bors', 'mathlib4-merge-conflict-bot'] |
grunweg assignee:grunweg |
100-39643 3 months ago |
331-30721 331 days ago |
66-73556 66 days |
| 34963 |
Parcly-Taxel author:Parcly-Taxel |
feat(Archive): proof of the Robbins conjecture |
Cf. [#mathlib4 > Alternative axiomatization of boolean algebras @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Alternative.20axiomatization.20of.20boolean.20algebras/near/558900960) and #31924. |
t-algebra
awaiting-zulip
label:t-algebra$ |
610/0 |
Archive.lean,Archive/Robbins.lean |
2 |
2 |
['chrisflav', 'github-actions'] |
chrisflav assignee:chrisflav |
97-804 3 months ago |
97-804 97 days ago |
71-52828 71 days |
| 32742 |
LTolDe author:LTolDe |
feat(MeasureTheory/Constructions/Polish/Basic): add class SuslinSpace |
add new class `SuslinSpace` for a topological space that is an analytic set in itself
This will be useful to prove the **Effros Theorem**, see [zulip thread](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Effros.20Theorem/with/558712441).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
awaiting-zulip
t-measure-probability
awaiting-author
|
4/0 |
Mathlib/MeasureTheory/Constructions/Polish/Basic.lean |
1 |
10 |
['ADedecker', 'LTolDe', 'dagurtomas', 'dupuisf', 'github-actions', 'jcommelin'] |
PatrickMassot assignee:PatrickMassot |
79-74760 2 months ago |
201-7761 201 days ago |
11-7507 11 days |
| 30668 |
astrainfinita author:astrainfinita |
feat: `QuotType` |
This typeclass is primarily for use by type synonyms of `Quot` and `Quotient`. Using `QuotType` API for type synonyms of `Quot` and `Quotient` will avoid defeq abuse caused by directly using `Quot` and `Quotient` APIs.
This PR also adds some typeclasses to support different ways to find the quotient map that should be used. See the documentation comments of these typeclasses for examples of usage.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> Mathlib.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
It's not a typical design to use these auxiliary typeclasses and term elaborators, but I haven't found a better way to support these notations.
Some of the naming may need to be discussed. For example:
- `⟦·⟧` is currently called `mkQ` in names. This distinguishes it from other `.mk`s and makes it possible to write the quotient map as `mkQ` `mkQ'` ~~`mkQ_ h`~~. But this will also require changing the old lemma names.
- It would be helpful if the names of new type classes explained their functionality better.
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/migrate.20to.20.60QuotLike.60.20API)
This PR continues the work from #16421.
Original PR: https://github.com/leanprover-community/mathlib4/pull/16421 |
RFC
t-data
awaiting-zulip
awaiting-author
|
629/0 |
Mathlib.lean,Mathlib/Data/QuotType.lean,MathlibTest/QuotType.lean |
3 |
22 |
['SnirBroshi', 'YaelDillies', 'astrainfinita', 'dagurtomas', 'github-actions', 'mathlib4-merge-conflict-bot', 'plp127', 'vihdzp'] |
nobody |
79-62061 2 months ago |
280-44506 280 days ago |
0-81 1 minute |
| 38546 |
yhx-12243 author:yhx-12243 |
fix(Algebra/Module/Injective): changing the universe from the module's to the ring's |
Change the definition of
```lean
class Module.Injective : Prop where
out : ∀ ⦃X Y : Type v⦄ [AddCommGroup X] [AddCommGroup Y] [Module R X] [Module R Y]
(f : X →ₗ[R] Y) (_ : Function.Injective f) (g : X →ₗ[R] Q),
∃ h : Y →ₗ[R] Q, ∀ x, h (f x) = g x
```
into
```lean
class Module.Injective : Prop where
out : ∀ ⦃X Y : Type u⦄ [AddCommGroup X] [AddCommGroup Y] [Module R X] [Module R Y]
(f : X →ₗ[R] Y) (_ : Function.Injective f) (g : X →ₗ[R] Q),
∃ h : Y →ₗ[R] Q, ∀ x, h (f x) = g x
```
where `u` is the universe of ring, `v` is the universe of module,
to make it agree with `Module.Baer` and real mathematical definition, **without universe issues** (make the theorem [`Module.Baer.of_injective`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Module/Injective.html#Module.Baer.of_injective) not require `Small.{v, u} R` issue).
This type of adaption also appeared in the criterion `Module.Flat`, which also uses `Type u` on testing modules.
See discussions in https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Universe.20issue.20about.20injective.20module .
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
awaiting-zulip
awaiting-author
label:t-algebra$ |
57/43 |
Mathlib/Algebra/Category/ModuleCat/Injective.lean,Mathlib/Algebra/Category/ModuleCat/Ulift.lean,Mathlib/Algebra/Module/Injective.lean,Mathlib/RepresentationTheory/FinGroupCharZero.lean,Mathlib/RingTheory/Flat/Tensor.lean,Mathlib/RingTheory/LocalProperties/Injective.lean |
6 |
10 |
['eric-wieser', 'github-actions', 'grunweg', 'mathlib-bors', 'wwylele', 'yhx-12243'] |
nobody |
47-32237 1 month ago |
90-73904 90 days ago |
0-26133 7 hours |
| 32608 |
PrParadoxy author:PrParadoxy |
feat(LinearAlgebra/PiTensorProduct): API for PiTensorProducts indexed by sets |
This PR addresses a TODO item in LinearAlgebra/PiTensorProduct.lean:
* API for the various ways ι can be split into subsets; connect this
with the binary tensor product
-- specifically by describing tensors of type ⨂ (i : S), M i, for S : Set ι.
Our primary motivation is to formalise the notion of "restricted tensor
products". This will be the content of a follow-up PR.
Beyond that, the Set API is natural in contexts where the index type has
an independent interpretation. An example is quantum physics, where ι
ranges over distinguishable degrees of freedom, and where its is common
practice to annotate objects by the set of indices they are defined on.
---
Stub file with preliminary definition of the restricted tensor product as a direct limit of tensors indexed by finite subsets of an index type:
https://github.com/PrParadoxy/mathlib4/blob/restricted-stub/Mathlib/LinearAlgebra/PiTensorProduct/Restricted.lean
---
- [x] depends on: #32598
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
awaiting-zulip
t-algebra
WIP
merge-conflict
label:t-algebra$ |
300/2 |
Mathlib.lean,Mathlib/LinearAlgebra/PiTensorProduct.lean,Mathlib/LinearAlgebra/PiTensorProduct/Set.lean |
3 |
32 |
['PrParadoxy', 'dagurtomas', 'eric-wieser', 'github-actions', 'goliath-klein', 'leanprover-radar', 'mathlib-merge-conflicts', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot'] |
nobody |
36-71418 1 month ago |
216-726 216 days ago |
10-66980 10 days |
| 33031 |
chiyunhsu author:chiyunhsu |
feat(Combinatorics/Enumerative/Partition): add combinatorial proof of Euler's partition theorem |
The new file EulerComb.lean contains the combinatorial proof of Euler's partition theorem. The analytic proof of the theorem and its generalization of Glaisher's Theorem has already been formalized in [Glaisher.lean](https://github.com/leanprover-community/mathlib4/blob/master/Mathlib/Combinatorics/Enumerative/Partition/Glaisher.lean). The generalization of the combinatorial proof from this file to Glaisher's Theorem is within reach.
---
Zulip discussion: [#mathlib4 > Glaisher’s Bijection on integer partitions](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Glaisher.E2.80.99s.20Bijection.20on.20integer.20partitions/with/570808111)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
awaiting-zulip
|
531/0 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Partition/EulerComb.lean |
2 |
8 |
['chiyunhsu', 'dagurtomas', 'github-actions', 'tb65536', 'vihdzp'] |
b-mehta assignee:b-mehta |
30-71099 1 month ago |
178-11219 178 days ago |
42-22427 42 days |
| 40022 |
chenson2018 author:chenson2018 |
chore(Algebra): refactor proofs where `grind?` fails |
These are sources of technical debt as now reported in the [weekly linting report](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log/with/544658968). The idea is that a successful grind proof can fail to report the theorems it used via grind?, which means that if these proofs break across toolchains that it becomes significantly harder to repair.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
awaiting-zulip
label:t-algebra$ |
16/6 |
Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Notation/Support.lean,Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/Algebra/Order/Field/Basic.lean,Mathlib/Algebra/Order/Ring/StandardPart.lean,Mathlib/Algebra/Polynomial/Degree/Lemmas.lean |
6 |
2 |
['github-actions', 'themathqueen'] |
themathqueen assignee:themathqueen |
28-21832 28 days ago |
28-21832 28 days ago |
29-68789 29 days |
| 39233 |
wrenna-robson author:wrenna-robson |
feat: `Pi.map` rename to `Function.map` |
This PR renames `Pi.map` to `Function.map` and makes the changes necessary to support this. In particular this means that Mathlib.Logic.Function.Defs now only contains the Function namespace.
A future PR may update the names of *.piMap in line with this.
Zulip thread: [#PR reviews > #39233 - rename Pi.map to Function.map @ 💬](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/.2339233.20-.20rename.20Pi.2Emap.20to.20Function.2Emap/near/594605689)
General discussion regarding the Pi namespace: https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/The.20Pi.20namespace/near/594782721
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-zulip |
130/121 |
Mathlib/Algebra/Category/Grp/AB.lean,Mathlib/Algebra/Notation/Pi/Defs.lean,Mathlib/Algebra/Order/Antidiag/Nat.lean,Mathlib/Algebra/Regular/Pi.lean,Mathlib/Analysis/InnerProductSpace/Coalgebra.lean,Mathlib/Analysis/SpecialFunctions/PolarCoord.lean,Mathlib/Condensed/Discrete/LocallyConstant.lean,Mathlib/Control/Bifunctor.lean,Mathlib/Data/Finset/Powerset.lean,Mathlib/Data/Prod/Basic.lean,Mathlib/Data/Set/Prod.lean,Mathlib/Dynamics/Ergodic/MeasurePreserving.lean,Mathlib/Dynamics/PeriodicPts/Defs.lean,Mathlib/Dynamics/PeriodicPts/Lemmas.lean,Mathlib/Dynamics/TopologicalEntropy/Semiconj.lean,Mathlib/FieldTheory/Perfect.lean,Mathlib/Geometry/Manifold/IsManifold/Basic.lean,Mathlib/Geometry/Manifold/IsManifold/ExtChartAt.lean,Mathlib/GroupTheory/MonoidLocalization/Lemmas.lean,Mathlib/LinearAlgebra/Multilinear/Basis.lean,Mathlib/LinearAlgebra/Pi.lean,Mathlib/Logic/Equiv/Basic.lean,Mathlib/Logic/Equiv/PartialEquiv.lean,Mathlib/Logic/Function/Basic.lean,Mathlib/Logic/Function/Defs.lean,Mathlib/Logic/Function/Iterate.lean,Mathlib/Order/Filter/Cofinite.lean,Mathlib/Order/Filter/Pi.lean,Mathlib/RingTheory/Coalgebra/Basic.lean,Mathlib/Topology/Algebra/FilterBasis.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/PiProd.lean,Mathlib/Topology/Algebra/RestrictedProduct/TopologicalSpace.lean,Mathlib/Topology/Constructions.lean,Mathlib/Topology/Maps/Basic.lean,Mathlib/Topology/MetricSpace/HausdorffAlexandroff.lean,Mathlib/Topology/MetricSpace/Isometry.lean,Mathlib/Topology/NhdsWithin.lean |
37 |
5 |
['github-actions', 'mathlib-merge-conflicts', 'themathqueen', 'wrenna-robson'] |
nobody |
27-27714 27 days ago |
75-6840 75 days ago |
0-7302 2 hours |
| 37346 |
euprunin author:euprunin |
chore: golf using `grind` |
The goal of this PR is to decrease the number of times lemmas are called explicitly. Any decrease in compilation time is a welcome side effect, although it is not a primary objective.
Trace profiling results (differences <30 ms considered measurement noise):
* `✅️ SimpleGraph.Walk.IsPath.getVert_injOn`: unchanged 🎉
* `✅️ SimpleGraph.Walk.length_bypass_le`: unchanged 🎉
* `✅️ Rat.floor_intCast_div_natCast`: unchanged 🎉
* `✅️ InnerProductGeometry.norm_eq_of_angle_sub_eq_angle_sub_rev_of_angle_ne_pi`: unchanged 🎉
* `✅️ padicNorm.zero_of_padicNorm_eq_zero`: unchanged 🎉
Profiled using `set_option trace.profiler true in`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-zulip
merge-conflict
|
7/45 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Data/Rat/Floor.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/NumberTheory/Padics/PadicNorm.lean |
4 |
23 |
['FernandoChu', 'bryangingechen', 'chenson2018', 'euprunin', 'faenuccio', 'github-actions', 'grunweg', 'mathlib-merge-conflicts'] |
nobody |
25-5300 25 days ago |
88-19748 88 days ago |
30-49603 30 days |
| 39311 |
felixpernegger author:felixpernegger |
refactor: redefine `eLpNorm` at `p = 0` |
For Zulip discussion see https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/eLpNorm.20junk.20value/with/576356442. In partuclar this change is suggestion 2 in [#mathlib4 > eLpNorm junk value @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/eLpNorm.20junk.20value/near/576340531)
This redefined [MeasureTheory.eLpNorm](https://leanprover-community.github.io/mathlib4_docs/Mathlib/MeasureTheory/Function/LpSeminorm/Defs.html#MeasureTheory.eLpNorm) at `p = 0`. Previously it was always `0` but now it is the measure of the support of the function (technical detail: In order to avoid having to add additional arguments to `eLpNorm`, we define it as the measure of the support of the norm of the function, but this is almost always the same)
The motivation for this comes from the counting measure, in particular this then unifies with https://leanprover-community.github.io/mathlib4_docs/Mathlib/Analysis/Normed/Lp/lpSpace.html#Mem%E2%84%93p. In any case, it is "closer" to the actual mathematical definition
Unfortunately, since `eLpNorm` is widely used, the diff is very large and a lot of theorems break (i.e. now require `p != 0`). Oftentimes `p != 0` is still not required (sometimes with nontrivial arguments), I tried to avoid adding extra hypothesis whenever I could but I almost certainly missed some.
There now may also be places where we dont need `p != 0` as a hypothesis anymore (i.e. for `[Memℓp](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Analysis/Normed/Lp/lpSpace.html#Mem%E2%84%93p)`), but this is not included in this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
awaiting-zulip
merge-conflict
t-measure-probability
|
950/595 |
Mathlib/Analysis/Distribution/ContDiffMapSupportedIn.lean,Mathlib/Analysis/Distribution/SchwartzSpace/Basic.lean,Mathlib/Analysis/Distribution/TemperateGrowth.lean,Mathlib/Analysis/Distribution/TemperedDistribution.lean,Mathlib/Analysis/Distribution/TestFunction.lean,Mathlib/Analysis/Fourier/LpSpace.lean,Mathlib/Analysis/FunctionalSpaces/SobolevInequality.lean,Mathlib/Analysis/Normed/Lp/SmoothApprox.lean,Mathlib/Data/ENNReal/Holder.lean,Mathlib/MeasureTheory/Function/ContinuousMapDense.lean,Mathlib/MeasureTheory/Function/ConvergenceInMeasure.lean,Mathlib/MeasureTheory/Function/Holder.lean,Mathlib/MeasureTheory/Function/L1Space/Integrable.lean,Mathlib/MeasureTheory/Function/L2Space.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Function/LpSeminorm/CompareExp.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Defs.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Indicator.lean,Mathlib/MeasureTheory/Function/LpSeminorm/LpNorm.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Monotonicity.lean,Mathlib/MeasureTheory/Function/LpSeminorm/SMul.lean,Mathlib/MeasureTheory/Function/LpSeminorm/TriangleInequality.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Trim.lean,Mathlib/MeasureTheory/Function/LpSpace/Basic.lean,Mathlib/MeasureTheory/Function/LpSpace/Complete.lean,Mathlib/MeasureTheory/Function/LpSpace/CompleteOfCompleteLp.lean,Mathlib/MeasureTheory/Function/LpSpace/ContinuousFunctions.lean,Mathlib/MeasureTheory/Function/LpSpace/Indicator.lean,Mathlib/MeasureTheory/Function/SimpleFuncDenseLp.lean,Mathlib/MeasureTheory/Function/UniformIntegrable.lean,Mathlib/MeasureTheory/Integral/SetToL1.lean,Mathlib/Probability/CentralLimitTheorem.lean,Mathlib/Probability/Distributions/Gaussian/Basic.lean,Mathlib/Probability/Distributions/Gaussian/Fernique.lean,Mathlib/Probability/Distributions/Gaussian/HasGaussianLaw/Basic.lean,Mathlib/Probability/Distributions/Gaussian/Real.lean,Mathlib/Probability/IdentDistrib.lean,Mathlib/Probability/Kernel/Disintegration/CDFToKernel.lean,Mathlib/Probability/Kernel/Disintegration/Density.lean,Mathlib/Probability/Martingale/Convergence.lean,Mathlib/Probability/Moments/CovarianceBilinDual.lean,Mathlib/Probability/Moments/IntegrableExpMul.lean,Mathlib/Probability/Moments/SubGaussian.lean,Mathlib/Probability/Process/Filtration.lean,MathlibTest/congr.lean |
45 |
42 |
['felixpernegger', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'sgouezel'] |
nobody |
16-18033 16 days ago |
51-15661 51 days ago |
5-67427 5 days |
| 40994 |
felixpernegger author:felixpernegger |
chore(Topology): rename `IndiscreteTopology` to `HasIndiscreteTopology` |
Per naming convention. https://leanprover-community.github.io/contribute/naming.html#prop-valued-classes .
See [this](https://github.com/leanprover-community/leanprover-community.github.io/pull/882) PR for further information.
Renaming discrete topology will be more involved, sinced its used much more widely
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
awaiting-author
merge-conflict
awaiting-zulip
|
154/109 |
Mathlib/Analysis/Normed/Group/Basic.lean,Mathlib/Topology/AlexandrovDiscrete.lean,Mathlib/Topology/Algebra/Group/Basic.lean,Mathlib/Topology/Algebra/Monoid.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Constructions.lean,Mathlib/Topology/EMetricSpace/Basic.lean,Mathlib/Topology/Homeomorph/Defs.lean,Mathlib/Topology/Homotopy/Contractible.lean,Mathlib/Topology/Inseparable.lean,Mathlib/Topology/Irreducible.lean,Mathlib/Topology/Maps/Basic.lean,Mathlib/Topology/Metrizable/Basic.lean,Mathlib/Topology/NoetherianSpace.lean,Mathlib/Topology/Order.lean,Mathlib/Topology/Separation/Connected.lean,Mathlib/Topology/Sets/Opens.lean,Mathlib/Topology/Sheaves/PUnit.lean,Mathlib/Topology/UniformSpace/Separation.lean |
19 |
9 |
['felixpernegger', 'github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'scholzhannah'] |
scholzhannah assignee:scholzhannah |
11-33329 11 days ago |
30-11326 30 days ago |
2-10191 2 days |
| 40061 |
gasparattila author:gasparattila |
chore(MeasureTheory/SetSemiring): deprecate `disjointOfUnion` |
This definition was only used in the proof of `AddContent.addContent_sUnion_le_sum`. Since it is defined using choice with very specific properties, it is unlikely to be reusable elsewhere.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #40060
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
awaiting-zulip
merge-conflict
|
10/0 |
Mathlib/MeasureTheory/SetSemiring.lean |
1 |
6 |
['RemyDegenne', 'WojciechCzernous', 'gasparattila', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
EtienneC30 assignee:EtienneC30 |
9-56786 9 days ago |
54-19079 54 days ago |
1-10686 1 day |
| 38957 |
wwylele author:wwylele |
chore(GroupTheory/DivisibleHull): remove `backward.privateInPublic` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-group-theory
awaiting-zulip
|
5/12 |
Mathlib/GroupTheory/DivisibleHull.lean |
1 |
14 |
['Komyyy', 'Vierkantor', 'github-actions', 'grunweg', 'jcommelin', 'wwylele'] |
nobody |
2-30858 2 days ago |
2-30858 2 days ago |
73-19357 73 days |
| 42007 |
felixpernegger author:felixpernegger |
chore: don't use `by assumption` for hypothesis with exposed name |
Let's say some goal if solve with `:= by assumption` and `assumption` is using `h` to solve it. Then `:= h` would also solve the goal (note: in most cases this is not possible, we would need to expose names before). This is more readable (tells the used explicitly what is being used) and at least in theory slightly faster.
This PR replace all such `by assumption` with the hypothesis directly. If this looks good / gets merged, I will make another PR replacing also `assumption`'s which do not immediately follow a `by`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
awaiting-author
awaiting-zulip
|
20/20 |
Mathlib/Algebra/Homology/DerivedCategory/DerivabilityStructureInjectives.lean,Mathlib/Algebra/Polynomial/BigOperators.lean,Mathlib/Analysis/Calculus/FDeriv/Congr.lean,Mathlib/Analysis/Calculus/Gradient/Basic.lean,Mathlib/Analysis/MeanInequalities.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/RootsExtrema.lean,Mathlib/CategoryTheory/Limits/FinallySmall.lean,Mathlib/CategoryTheory/Presentable/Type.lean,Mathlib/Combinatorics/Additive/ApproximateSubgroup.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/Geometry/RingedSpace/LocallyRingedSpace.lean,Mathlib/LinearAlgebra/PiTensorProduct/Generators.lean,Mathlib/MeasureTheory/Function/UnifTight.lean,Mathlib/Order/Atoms.lean,Mathlib/Topology/Algebra/Valued/LocallyCompact.lean,Mathlib/Topology/Category/CompHausLike/EffectiveEpi.lean,Mathlib/Topology/Category/Profinite/Nobeling/Basic.lean,Mathlib/Topology/Category/TopCat/EffectiveEpi.lean |
18 |
6 |
['Vierkantor', 'felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
2-29201 2 days ago |
2-29215 2 days ago |
1-66762 1 day |
| 42066 |
lyfar author:lyfar |
feat(SimpleGraph/Coloring): add list-coloring compactness |
This is the focused part of [Lean Pool PR #275](https://github.com/Vilin97/lean-pool/pull/275) that does not duplicate Mathlib's existing ordinary de Bruijn--Erdős API. I brought it here after Vasily Ilin [recommended moving the genuinely new list-coloring part to Mathlib](https://github.com/Vilin97/lean-pool/pull/275#issuecomment-5066933313).
It adds `SimpleGraph.ListColoring`, restriction to induced subgraphs, compactness for explicitly finite color sets via `Set.Finite.rado_selection_subtype`, and the finite-induced-subgraph iff.
This is a formalized API for a standard corollary of Rado's selection lemma, not new mathematics.
AI disclosure: I used OpenAI Codex to inspect the current Mathlib API and contribution policy, adapt the list-coloring part of Lean Pool PR #275, implement this file, and run the verification commands below.
Verification:
```text
lake build Mathlib.Combinatorics.SimpleGraph.Coloring.List
lake exe lint-style Mathlib.Combinatorics.SimpleGraph.Coloring.List
lake exe batteries/runLinter Mathlib.Combinatorics.SimpleGraph.Coloring.List
lake exe mk_all --check
git diff upstream/master...HEAD --check
```
|
t-combinatorics
LLM-generated
new-contributor
awaiting-author
awaiting-zulip
|
96/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/List.lean |
2 |
10 |
['SnirBroshi', 'felixpernegger', 'github-actions', 'lyfar'] |
nobody |
1-33791 1 day ago |
2-5314 2 days ago |
0-4355 1 hour |
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Updated |
Last status change |
total time in review |
| 40404 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Constructions/BorelSpace): remove some `erw`'s |
Extracted from #40348
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-order
t-measure-probability
|
27/6 |
Mathlib/MeasureTheory/Constructions/BorelSpace/Order.lean,Mathlib/Order/Interval/Set/Basic.lean,Mathlib/Order/OrderDual.lean |
3 |
1 |
['github-actions'] |
nobody |
47-20976 1 month ago |
47-24274 47 days ago |
47-24087 47 days |
| 40925 |
JovanGerb author:JovanGerb |
chore(CategoryTheory/Functor/Category): don't expose `NatTrans.hcomp` |
This PR hides the definition of `NatTrans.hcomp`, because it has two equally sensible possible definitions. As a result, we can get rid of the `to_dual_insert_cast`. `simps` doesn't work for non-exposed definition, so `hcomp_app` is proved separately, and its dual `hcomp_app'` is added.
Note: some proofs break, because the `dsimp` set changes, due to the definition not being exposed. This is a bit unfortunate. There was some discussion on Zulip about changing `dsimp` for category theory into a simp set, which would fix this problem, because we could then add `hcomp_app` to this set.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
maintainer-merge
tech debt
|
30/15 |
Mathlib/AlgebraicTopology/DoldKan/NCompGamma.lean,Mathlib/AlgebraicTopology/DoldKan/PInfty.lean,Mathlib/CategoryTheory/Functor/Category.lean,Mathlib/CategoryTheory/Monoidal/Action/End.lean,Mathlib/CategoryTheory/Monoidal/End.lean,Mathlib/CategoryTheory/Triangulated/TStructure/SpectralObject.lean,Mathlib/CategoryTheory/Types/Basic.lean |
7 |
11 |
['JovanGerb', 'github-actions', 'grunweg', 'leanprover-radar', 'riccardobrasca'] |
nobody |
22-17228 22 days ago |
33-15125 33 days ago |
33-15745 33 days |
| 38018 |
matthewjasper author:matthewjasper |
feat(Algebra): expand Subalgebra.restrictScalars API |
Add an instance for the original algebra structure, the implied scalar tower instances, and the algebra equivalence with the original subalgebra. Use this to remove some `set_option backward.isDefEq.respectTransparency`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
|
61/15 |
Mathlib/Algebra/Algebra/Subalgebra/Tower.lean,Mathlib/RingTheory/AlgebraicIndependent/TranscendenceBasis.lean,Mathlib/RingTheory/Finiteness/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean |
4 |
15 |
['eric-wieser', 'github-actions', 'kbuzzard', 'leanprover-radar', 'mariainesdff', 'mathlib-merge-conflicts', 'matthewjasper'] |
mariainesdff assignee:mariainesdff |
11-65827 11 days ago |
11-67750 11 days ago |
86-33441 86 days |
| 41776 |
JovanGerb author:JovanGerb |
fix(Order/Heyting/Regular): fix `Lattice` instance diamond |
This PR fixes a diamond in the `Lattice` instance on `Regular`.
It's a bit awkward that `Lattice` does not extend `Min`, so `fast_instance%` doesn't save us here.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-order
|
1/2 |
Mathlib/Order/Heyting/Regular.lean |
1 |
5 |
['JovanGerb', 'YaelDillies', 'eric-wieser', 'github-actions'] |
YaelDillies assignee:YaelDillies |
10-71312 10 days ago |
11-7664 11 days ago |
11-7477 11 days |
| 41717 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Walk): more `transfer` API |
---
The Hamiltonian lemmas don't really need `Finite`; I'll fix this after #41435 (in whichever merges second).
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
tech debt
|
54/23 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean |
4 |
1 |
['github-actions'] |
nobody |
10-48996 10 days ago |
12-46380 12 days ago |
12-46296 12 days |
| 41200 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): pure morphisms |
In this PR, we define the notion of `κ`-pure morphisms (`IsCardinalPure`) in a category `C`. This class contains split monomorphisms and is stable under `κ`-filtered colimits. When `C` is a `κ`-accessible category, we show that `κ`-pure morphisms are monomorphisms.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
|
187/6 |
Mathlib.lean,Mathlib/CategoryTheory/Presentable/Basic.lean,Mathlib/CategoryTheory/Presentable/CardinalPure.lean |
3 |
16 |
['github-actions', 'joelriou', 'smorel394'] |
nobody |
10-9387 10 days ago |
22-18973 22 days ago |
25-72869 25 days |
| 41542 |
tb65536 author:tb65536 |
refactor(AlgebraicGeometry/Sites/Small): golf and remove some `backward.isDefEq.respectTransparency` |
This PR golfs and removes some `backward.isDefEq.respectTransparency`. Some proofs with the help of Claude, with further golfing by myself.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
LLM-generated
|
58/134 |
Mathlib/AlgebraicGeometry/Sites/Small.lean,Mathlib/CategoryTheory/Sites/Over.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
9-78063 9 days ago |
11-58615 11 days ago |
16-76412 16 days |
| 41427 |
YaelDillies author:YaelDillies |
refactor(Algebra/MvPolynomial): delete `coeff` |
... without a deprecation because we want dot notation to resolve to `AddMonoidAlgebra.coeff`.
For migration, replace bare `MvPolynomial.coeff`s with `AddMonoidAlgebra.coeff`. Dot notation `.coeff` will resolve to `AddMonoidAlgebra.coeff` without further change. `MvPolynomial.coeff m p` corresponds to `AddMonoidAlgebra.coeff p m`, so you will need to swap arguments. Note further that `AddMonoidAlgebra.coeff p` is bundled as a `Finsupp` while `MvPolynomial.coeff` is a bare function.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
label:t-algebra$ |
243/245 |
Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Division.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/MvPolynomial/Eval.lean,Mathlib/Algebra/MvPolynomial/Funext.lean,Mathlib/Algebra/MvPolynomial/Monad.lean,Mathlib/Algebra/MvPolynomial/Nilpotent.lean,Mathlib/Algebra/MvPolynomial/NoZeroDivisors.lean,Mathlib/Algebra/MvPolynomial/PDeriv.lean,Mathlib/Algebra/MvPolynomial/Rename.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Combinatorics/Nullstellensatz.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/RingTheory/Extension/Generators.lean,Mathlib/RingTheory/Extension/Presentation/Basic.lean,Mathlib/RingTheory/MvPolynomial/Basic.lean,Mathlib/RingTheory/MvPolynomial/FreeCommRing.lean,Mathlib/RingTheory/MvPolynomial/Groebner.lean,Mathlib/RingTheory/MvPolynomial/Homogeneous.lean,Mathlib/RingTheory/MvPolynomial/IrreducibleQuadratic.lean,Mathlib/RingTheory/MvPolynomial/MonomialOrder.lean,Mathlib/RingTheory/MvPolynomial/WeightedHomogeneous.lean,Mathlib/RingTheory/MvPowerSeries/Basic.lean,Mathlib/RingTheory/MvPowerSeries/Trunc.lean,Mathlib/RingTheory/NoetherNormalization.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Polynomial/IsIntegral.lean,Mathlib/RingTheory/Polynomial/Quotient.lean,Mathlib/RingTheory/Spectrum/Prime/Polynomial.lean,Mathlib/RingTheory/TensorProduct/MvPolynomial.lean |
35 |
11 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
nobody |
9-43642 9 days ago |
9-45146 9 days ago |
18-15132 18 days |
| 40392 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Integral/Lebesgue/Basic): fix an `erw` |
Extracted from #40348.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
tech debt
maintainer-merge
|
11/1 |
Mathlib/Data/ENNReal/Operations.lean,Mathlib/MeasureTheory/Integral/Lebesgue/Basic.lean |
2 |
5 |
['felixpernegger', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
9-15084 9 days ago |
9-17193 9 days ago |
40-27731 40 days |
| 41864 |
kebekus author:kebekus |
feat: estimate for logarithmic counting functions |
In preparation to the proof of the "Lemma of Logarithmic Derivatives" of Value Distribution Theory, establish the standard "Counting Estimate" for the logarithmic counting function. Simplify and streamline the API for restrictions of divisors a little.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
LLM-generated
|
124/15 |
Mathlib/Analysis/Complex/ValueDistribution/FirstMainTheorem.lean,Mathlib/Analysis/Complex/ValueDistribution/LogCounting/Basic.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
1 |
['github-actions'] |
nobody |
8-83137 8 days ago |
8-83137 8 days ago |
8-82950 8 days |
| 38039 |
themathqueen author:themathqueen |
chore(Topology): `UniformSpace.Completion` renames for morphisms |
This PR renames the following `UniformSpace.Completion` morphisms.
The `UniformSpace` namespace remains for ring morphisms and functions so that we're clear which completion we're talking about. For isometries, `UniformEquiv`s, `NormedAddGroupHom`s, there's no need for the `UniformSpace` namespace.
For the isometry definitions, we used `Isometry.ringHom{FromCompletion, Completion}` instead of `RingHom.Isometry.{fromCompletion, completion}` so that it won't clash with the function versions (`Isometry.{fromCompletion, completion}`).
RingHom
- [ ] `UniformSpace.Completion.mapRingHom` -> `UniformSpace.RingHom.toCompletion`
- [ ] `UniformSpace.Completion.extensionHom` -> `UniformSpace.RingHom.fromCompletion`
RingEquiv
- [ ] `UniformSpace.Completion.mapRingEquiv` -> `UniformSpace.RingEquiv.completion`
NormedAddGroupHom
- [ ] `NormedAddGroupHom.extension` -> `NormedAddGroupHom.fromCompletion`
RingHom isometries
- [ ] `Isometry.extensionHom` -> `Isometry.ringHomFromCompletion`
- [ ] `Isometry.mapRingHom` -> `Isometry.ringHomCompletion`
isometries
- [ ] `Isometry.completion_extension` -> `Isometry.fromCompletion`
- [ ] `Isometry.completion_map` -> `Isometry.completion`
Functions
- [ ] `UniformSpace.Completion.extension` -> `UniformSpace.Function.fromCompletion`
- [ ] `UniformSpace.Completion.map` -> `UniformSpace.Function.completion`
UniformEquiv
- [ ] `UniformSpace.Completion.mapEquiv` -> `UniformEquiv.completion`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
See Zulip thread: [#mathlib4 > naming convention: `UniformSpace.Completion` morphisms](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/naming.20convention.3A.20.60UniformSpace.2ECompletion.60.20morphisms)
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
|
385/230 |
Mathlib/Analysis/InnerProductSpace/Completion.lean,Mathlib/Analysis/Normed/Field/WithAbs.lean,Mathlib/Analysis/Normed/Group/Completion.lean,Mathlib/Analysis/Normed/Group/HomCompletion.lean,Mathlib/Analysis/Normed/Group/SemiNormedGrp/Completion.lean,Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean,Mathlib/NumberTheory/NumberField/Completion/InfinitePlace.lean,Mathlib/NumberTheory/NumberField/Completion/LiesOverInstances.lean,Mathlib/NumberTheory/Padics/Complex.lean,Mathlib/NumberTheory/Padics/HeightOneSpectrum.lean,Mathlib/NumberTheory/Padics/WithVal.lean,Mathlib/RingTheory/DedekindDomain/AdicValuation.lean,Mathlib/RingTheory/LaurentSeries.lean,Mathlib/Topology/Algebra/GroupCompletion.lean,Mathlib/Topology/Algebra/LinearMapCompletion.lean,Mathlib/Topology/Algebra/UniformMulAction.lean,Mathlib/Topology/Algebra/UniformRing.lean,Mathlib/Topology/Algebra/Valued/ValuedField.lean,Mathlib/Topology/Algebra/Valued/WithVal.lean,Mathlib/Topology/Category/UniformSpace.lean,Mathlib/Topology/MetricSpace/Completion.lean,Mathlib/Topology/UniformSpace/Completion.lean |
22 |
8 |
['github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'themathqueen'] |
ADedecker assignee:ADedecker |
8-72748 8 days ago |
8-74148 8 days ago |
27-70179 27 days |
| 36239 |
plp127 author:plp127 |
feat(FieldTheory/KrullTopology): define uniform group structure on galois group |
Endow the galois group of a field extension `Gal(L/K)` with the structure of a uniform group. Use this to prove some properties of the galois group earlier, for example, that the galois group is compact is immediate, and in more generality than the version proved in `FieldTheory/Galois/Profinite`. Deprecate some material which used to be used to define the krull topology, but is now unused since the krull topology comes out of the uniform structure.
---
- [x] depends on: #39759
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
281/213 |
Mathlib/FieldTheory/Galois/Infinite.lean,Mathlib/FieldTheory/Galois/Profinite.lean,Mathlib/FieldTheory/KrullTopology.lean,Mathlib/NumberTheory/Cyclotomic/CyclotomicCharacter.lean |
4 |
25 |
['acmepjz', 'dagurtomas', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'plp127', 'vihdzp'] |
mattrobball assignee:mattrobball |
6-674 6 days ago |
6-1970 6 days ago |
67-53034 67 days |
| 40648 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/MeasurableSpace/Constructions): remove some defeq abuse |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
7/2 |
Mathlib/MeasureTheory/MeasurableSpace/Constructions.lean,Mathlib/Order/Disjointed.lean |
2 |
2 |
['github-actions', 'wwylele'] |
nobody |
5-59421 5 days ago |
40-59040 40 days ago |
40-58871 40 days |
| 41731 |
mpacholski author:mpacholski |
feat(Topology/Algebra/Module/Spaces/ContinuousLinearMap): convert `toLinearMap₁₂` to a linear map |
Convert the projection `toLinearMap₁₂` (which strips the topology from a continuous semibilinear map) to a linear map, by showing that it preserves addition and scalar multiplication. We also rename `toLinearMap₁₂_apply` to `toLinearMap₁₂_apply_apply_apply` without deprecation so that we can have `_apply` be a different lemma.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
tech debt
maintainer-merge
|
11/9 |
Mathlib/Analysis/Fourier/FourierTransformDeriv.lean,Mathlib/MeasureTheory/Measure/CharacteristicFunction/TaylorExpansion.lean,Mathlib/Topology/Algebra/Module/Spaces/ContinuousLinearMap.lean |
3 |
24 |
['github-actions', 'mpacholski', 'pechersky', 'themathqueen'] |
nobody |
4-6556 4 days ago |
7-79009 7 days ago |
9-36336 9 days |
| 41460 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Walk/Operations): more operations API |
---
Moved `support_tail_of_not_nil` up because `reverse_dropLast` uses it as a `simp` lemma.
Tagged it with `simp` makes `cons_support_tail` work `by simp`, so I also untagged `cons_support_tail`.
You may wonder whether we need `mapLe` API if it's an `abbrev` for `map`; the answer is you can't `rw`/`simp` goals with `mapLe` using `map` API because these tactics do not unfold the `Hom.ofLE` (and then `id`) applications in the endpoints of the walk, since it isn't reducible (even though `mapLe` itself is). The definition of `mapLe` is actually an `abbrev` plus a non-reducibly defeq type change.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
tech debt
|
86/15 |
Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Operations.lean |
3 |
5 |
['SnirBroshi', 'github-actions', 'vlad902'] |
JovanGerb assignee:JovanGerb |
3-60324 3 days ago |
18-57212 18 days ago |
18-58902 18 days |
| 41981 |
YaelDillies author:YaelDillies |
refactor(Algebra/Polynomial): make into an `abbrev` of `AddMonoidAlgebra` |
... and deprecate the declarations that are now tautological (`toFinsupp`/`ofFinsupp` and their API). For some of the `Polynomial` declarations that needed changing, it was simplest to replace them with the corresponding `AddMonoidAlgebra` one. Note that this replacement is far from exhaustive (a majority of the `Polynomial` API could be replaced this way).
Note that `algebraMap R R[X]` has changed defeq.
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Reworking.20Finsupp.2C.20MonoidAlgebra.2C.20HahnSeries.2E.20PowerSeries/with/609275708)
Generated through several rounds of manual review with Claude Opus. Heavily edited by hand afterwards.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
LLM-generated
label:t-algebra$ |
337/538 |
Mathlib/Algebra/MonoidAlgebra/MapDomain.lean,Mathlib/Algebra/MonoidAlgebra/Support.lean,Mathlib/Algebra/Polynomial/AlgebraMap.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/Algebra/Polynomial/Basis.lean,Mathlib/Algebra/Polynomial/Cardinal.lean,Mathlib/Algebra/Polynomial/Coeff.lean,Mathlib/Algebra/Polynomial/Degree/Defs.lean,Mathlib/Algebra/Polynomial/Degree/IsMonicOfDegree.lean,Mathlib/Algebra/Polynomial/Degree/Operations.lean,Mathlib/Algebra/Polynomial/Degree/Support.lean,Mathlib/Algebra/Polynomial/Derivative.lean,Mathlib/Algebra/Polynomial/Eval/Coeff.lean,Mathlib/Algebra/Polynomial/Eval/Defs.lean,Mathlib/Algebra/Polynomial/Eval/Degree.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/Algebra/Polynomial/GroupRingAction.lean,Mathlib/Algebra/Polynomial/Inductions.lean,Mathlib/Algebra/Polynomial/Laurent.lean,Mathlib/Algebra/Polynomial/Module/Basic.lean,Mathlib/Algebra/Polynomial/Monic.lean,Mathlib/Algebra/Polynomial/Monomial.lean,Mathlib/Algebra/Polynomial/OfFn.lean,Mathlib/Algebra/Polynomial/Reverse.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Algebra/Polynomial/UnitTrinomial.lean,Mathlib/Algebra/Ring/Subring/IntPolynomial.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/LinearAlgebra/Finsupp/VectorSpace.lean,Mathlib/LinearAlgebra/Lagrange.lean,Mathlib/RingTheory/IsAdjoinRoot.lean,Mathlib/RingTheory/KrullDimension/Polynomial.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Polynomial/Opposites.lean,Mathlib/RingTheory/PowerBasis.lean,Mathlib/RingTheory/PowerSeries/Derivative.lean,Mathlib/RingTheory/Spectrum/Prime/Topology.lean,Mathlib/RingTheory/ZariskisMainTheorem.lean,Mathlib/Tactic/ReduceModChar.lean,MathlibTest/InstanceDiamonds.lean |
40 |
8 |
['NoahW314', 'YaelDillies', 'github-actions', 'leanprover-radar', 'tb65536'] |
nobody |
2-38824 2 days ago |
4-45661 4 days ago |
4-47971 4 days |
| 39808 |
chenson2018 author:chenson2018 |
chore(Data): refactor proofs where `grind?` fails |
These are sources of technical debt as now reported in the [weekly linting report](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log/with/544658968). The idea is that a successful `grind` proof can fail to report the theorems it used via `grind?`, which means that if these proofs break across toolchains that it becomes significantly harder to repair.
Most of these are fixed by squeezing the call to `grind` and unsetting `linter.tacticAnalysis.verifyGrindOnly` so they no longer appear in the weekly report. Unfortunately, this can't be on by default for performance reasons, but I highly encourage using this linter when adding any `grind` proofs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
tech debt
|
69/41 |
Mathlib/Data/Bool/Basic.lean,Mathlib/Data/Bool/Set.lean,Mathlib/Data/EReal/Operations.lean,Mathlib/Data/Fin/Tuple/NatAntidiagonal.lean,Mathlib/Data/Finset/Image.lean,Mathlib/Data/Finset/Powerset.lean,Mathlib/Data/Finset/Range.lean,Mathlib/Data/Finset/SMulAntidiagonal.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Chain.lean,Mathlib/Data/List/Count.lean,Mathlib/Data/List/Cycle.lean,Mathlib/Data/List/Induction.lean,Mathlib/Data/List/ReduceOption.lean,Mathlib/Data/List/Sigma.lean,Mathlib/Data/List/Sort.lean,Mathlib/Data/List/TakeDrop.lean,Mathlib/Data/List/Triplewise.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Set/Card.lean,Mathlib/Data/Set/Disjoint.lean,Mathlib/Data/Set/Function.lean,Mathlib/Data/Set/Insert.lean,Mathlib/Data/Sum/Order.lean |
24 |
4 |
['Vierkantor', 'chenson2018', 'github-actions'] |
nobody |
2-30136 2 days ago |
62-44765 62 days ago |
62-44578 62 days |
| 41995 |
YaelDillies author:YaelDillies |
feat(RingTheory): bialgebra homs `R[G] → R[H]` are in bijection with group homs `G → H` |
... for abelian groups `G` and `H`. Furthermore, the convolution product on bialgebra homs corresponds to pointwise addition on group homs.
Also generate more lemmas through `to_additive`, remove some unused `set_option`s and relocate `MonoidAlgebra.toAdditive`/`AddMonoidAlgebra.toMultiplicative` to existing sections.
From Toric
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
toric
large-import
|
335/45 |
Mathlib/Algebra/Category/CommHopfAlgCat.lean,Mathlib/RingTheory/Bialgebra/MonoidAlgebra.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
2-17890 2 days ago |
2-18620 2 days ago |
2-21502 2 days |
| 41903 |
felixpernegger author:felixpernegger |
chore: simplify proofs with `grind` |
These all come from the [weekly linting log](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log) "Info messages count".
Note that that counter has two false positives which arise due to "all_goals". These are not included here obviously, but all others are (can undo some if they seriously hurt performance).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
10/40 |
Mathlib/Algebra/Polynomial/RuleOfSigns.lean,Mathlib/AlgebraicTopology/SimplexCategory/ToMkOne.lean,Mathlib/Analysis/Calculus/Taylor.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Analysis/SpecialFunctions/Stirling.lean,Mathlib/Combinatorics/Hypergraph/Basic.lean,Mathlib/Data/List/Defs.lean,Mathlib/LinearAlgebra/AffineSpace/Simplex/Basic.lean,Mathlib/MeasureTheory/MeasurableSpace/Defs.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/MeasureTheory/SetSemiring.lean,Mathlib/NumberTheory/LucasLehmer.lean,Mathlib/Order/CountableSupClosed.lean,Mathlib/Probability/Moments/SubGaussian.lean,Mathlib/Probability/Process/LocalProperty.lean,Mathlib/RingTheory/MvPowerSeries/GaussNorm.lean,Mathlib/Topology/Order/Basic.lean |
18 |
11 |
['Vierkantor', 'felixpernegger', 'github-actions', 'leanprover-radar', 'vlad902'] |
nobody |
2-17476 2 days ago |
7-79676 7 days ago |
7-79508 7 days |
| 41457 |
NoahW314 author:NoahW314 |
feat(Algebra/Group/Units/Basic): deduplicate lemmas by generalizing to `IsDedekindFiniteMonoid` |
Generalize a group of lemmas to `IsDedekindFiniteMonoid` which previously had versions for `CommMonoid`, `LeftCancelMonoid`, `RightCancelMonoid`, `CancelMonoid`, and `Ordinal`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
30/86 |
Mathlib/Algebra/AffineMonoid/Irreducible.lean,Mathlib/Algebra/Group/Units/Basic.lean,Mathlib/AlgebraicTopology/SimplicialSet/Horn.lean,Mathlib/Combinatorics/Enumerative/DyckWord.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Exponential.lean,scripts/nolints_prime_decls.txt |
7 |
4 |
['NoahW314', 'Vierkantor', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
2-15908 2 days ago |
2-15908 2 days ago |
18-56290 18 days |
| 40394 |
mathlib-splicebot author:mathlib-splicebot |
chore(MeasureTheory/Measure/Haar/InnerProductSpace: remove an `erw` |
Extracted from #40348. |
t-measure-probability
tech debt
|
7/6 |
Mathlib/MeasureTheory/Measure/Haar/InnerProductSpace.lean |
1 |
4 |
['felixpernegger', 'github-actions'] |
kex-y assignee:kex-y |
1-60321 1 day ago |
47-29732 47 days ago |
47-29545 47 days |
| 39807 |
vihdzp author:vihdzp |
feat: universe-heterogeneous cardinal equality |
We introduce a predicate `LiftEq a b`, with notation `a =ₗ b`, which states that two cardinals (in different universes) are equal. This serves as a single canonical spelling for `lift.{v} a = lift.{u} b` and similar incantations.
Future PRs will introduce the analogous predicates for `<` and `≤`, and a notation typeclass so the notation can be reused for `Ordinal` and `OrderType`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory
tech debt
|
316/149 |
Mathlib/CategoryTheory/Abelian/GrothendieckCategory/EnoughInjectives.lean,Mathlib/FieldTheory/IsAlgClosed/Classification.lean,Mathlib/LinearAlgebra/Dimension/Basic.lean,Mathlib/LinearAlgebra/Dimension/Constructions.lean,Mathlib/LinearAlgebra/Dimension/Free.lean,Mathlib/LinearAlgebra/Dimension/FreeAndStrongRankCondition.lean,Mathlib/LinearAlgebra/Dimension/LinearMap.lean,Mathlib/LinearAlgebra/Dimension/StrongRankCondition.lean,Mathlib/ModelTheory/Basic.lean,Mathlib/ModelTheory/Satisfiability.lean,Mathlib/RingTheory/AlgebraicIndependent/Basic.lean,Mathlib/RingTheory/AlgebraicIndependent/RankAndCardinality.lean,Mathlib/RingTheory/AlgebraicIndependent/TranscendenceBasis.lean,Mathlib/RingTheory/LinearDisjoint.lean,Mathlib/RingTheory/Localization/Cardinality.lean,Mathlib/SetTheory/Cardinal/Aleph.lean,Mathlib/SetTheory/Cardinal/Arithmetic.lean,Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Cardinal/Defs.lean,Mathlib/SetTheory/Cardinal/ENat.lean,Mathlib/SetTheory/Cardinal/Order.lean,Mathlib/SetTheory/Cardinal/ToNat.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/ZFC/Cardinal.lean |
24 |
3 |
['acmepjz', 'github-actions', 'mathlib-merge-conflicts'] |
alreadydone assignee:alreadydone |
1-57649 1 day ago |
1-59694 1 day ago |
41-49731 41 days |
| 42075 |
Parcly-Taxel author:Parcly-Taxel |
chore: delete deprecated declarations/modules from January 2026 |
`Mathlib.Util.MemoFix` is directly removed since all deprecations in it are more than 6 months old.
----
The automated deprecation removal action is now broken because the branch for #40618 still exists. |
tech debt
file-removed
|
1/2758 |
Mathlib.lean,Mathlib/Algebra/Algebra/Basic.lean,Mathlib/Algebra/Algebra/Epi.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/Category/ModuleCat/Semi.lean,Mathlib/Algebra/Category/Ring/Epi.lean,Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Int/Defs.lean,Mathlib/Algebra/GroupWithZero/Action/Defs.lean,Mathlib/Algebra/GroupWithZero/Basic.lean,Mathlib/Algebra/GroupWithZero/Defs.lean,Mathlib/Algebra/GroupWithZero/Int.lean,Mathlib/Algebra/GroupWithZero/NonZeroDivisors.lean,Mathlib/Algebra/GroupWithZero/Regular.lean,Mathlib/Algebra/ModEq.lean,Mathlib/Algebra/Module/Hom.lean,Mathlib/Algebra/Module/LinearMap/End.lean,Mathlib/Algebra/NoZeroSMulDivisors/Prod.lean,Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Algebra/Polynomial/Degree/Definitions.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Algebra/Ring/Regular.lean,Mathlib/AlgebraicGeometry/Artinian.lean,Mathlib/AlgebraicGeometry/Cover/MorphismProperty.lean,Mathlib/AlgebraicGeometry/Morphisms/ClosedImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/FinitePresentation.lean,Mathlib/AlgebraicGeometry/Morphisms/FiniteType.lean,Mathlib/AlgebraicGeometry/Morphisms/Flat.lean,Mathlib/AlgebraicGeometry/Morphisms/FormallyUnramified.lean,Mathlib/AlgebraicGeometry/Morphisms/OpenImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Preimmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Separated.lean,Mathlib/AlgebraicGeometry/Morphisms/SurjectiveOnStalks.lean,Mathlib/AlgebraicGeometry/Morphisms/UniversallyClosed.lean,Mathlib/AlgebraicGeometry/Morphisms/UniversallyOpen.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/SimplyConnected.lean,Mathlib/AlgebraicTopology/ModelCategory/CofibrantObjectHomotopy.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Asymptotics/AsymptoticEquivalent.lean,Mathlib/Analysis/Calculus/Deriv/Mul.lean,Mathlib/Analysis/Calculus/FDeriv/Add.lean,Mathlib/Analysis/Calculus/Implicit.lean,Mathlib/Analysis/Calculus/ImplicitContDiff.lean,Mathlib/Analysis/Calculus/TangentCone/Basic.lean,Mathlib/Analysis/Complex/IntegerCompl.lean,Mathlib/Analysis/Complex/Schwarz.lean,Mathlib/Analysis/Complex/TaylorSeries.lean,Mathlib/Analysis/Complex/UnitDisc/Basic.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Basic.lean,Mathlib/Analysis/Convex/Body.lean,Mathlib/Analysis/Distribution/FourierSchwartz.lean,Mathlib/Analysis/Distribution/SchwartzSpace.lean,Mathlib/Analysis/Distribution/SchwartzSpace/Fourier.lean,Mathlib/Analysis/Distribution/TemperedDistribution.lean,Mathlib/Analysis/Fourier/Notation.lean,Mathlib/Analysis/InnerProductSpace/Orthogonal.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/LocallyConvex/Barrelled.lean,Mathlib/Analysis/Matrix/Spectrum.lean,Mathlib/Analysis/Normed/Group/Basic.lean,Mathlib/Analysis/Normed/Group/Pointwise.lean,Mathlib/Analysis/Normed/Module/Ball/Pointwise.lean,Mathlib/Analysis/Normed/Order/Basic.lean,Mathlib/Analysis/Normed/Unbundled/SeminormFromConst.lean,Mathlib/Analysis/Polynomial/MahlerMeasure.lean,Mathlib/Analysis/Real/Hyperreal.lean,Mathlib/Analysis/SpecialFunctions/Complex/Log.lean,Mathlib/Analysis/SpecialFunctions/NonIntegrable.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Cotangent.lean,Mathlib/CategoryTheory/Adjunction/Opposites.lean,Mathlib/CategoryTheory/Category/Grpd.lean,Mathlib/CategoryTheory/Limits/Shapes/Products.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/CommSq.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/Equifibered.lean,Mathlib/CategoryTheory/MorphismProperty/Basic.lean,Mathlib/CategoryTheory/Sites/IsSheafFor.lean,Mathlib/CategoryTheory/Triangulated/TStructure/Basic.lean,Mathlib/Combinatorics/SimpleGraph/AdjMatrix.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/Vertex.lean,Mathlib/Combinatorics/SimpleGraph/VertexCover.lean,Mathlib/Computability/Primrec.lean,Mathlib/Computability/Primrec/Basic.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Data/Fintype/Prod.lean,Mathlib/Data/Int/ModEq.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Flatten.lean,Mathlib/Data/List/GetD.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Option/Defs.lean,Mathlib/Data/Set/Card.lean,Mathlib/Data/SetLike/Basic.lean,Mathlib/Data/Tree/RBMap.lean,Mathlib/FieldTheory/Isaacs.lean,Mathlib/Geometry/Manifold/PartitionOfUnity.lean,Mathlib/Geometry/Manifold/Riemannian/Basic.lean,Mathlib/Lean/Expr.lean,Mathlib/Lean/Expr/ReplaceRec.lean,Mathlib/LinearAlgebra/AffineSpace/AffineSubspace/Basic.lean |
184 |
1 |
['github-actions'] |
nobody |
1-57137 1 day ago |
1-60201 1 day ago |
1-63100 1 day |
| 37751 |
JovanGerb author:JovanGerb |
chore(Order/Filter/IsBounded): use `to_dual` |
use `to_dual` for `Filter.IsBounded`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37747
[](https://gitpod.io/from-referrer/)
|
tech debt |
81/227 |
Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Order/Filter/IsBounded.lean |
2 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
1-56166 1 day ago |
1-58926 1 day ago |
40-60626 40 days |
| 38200 |
Parcly-Taxel author:Parcly-Taxel |
feat: Turán numbers and their strict monotonicity |
`strictMonoOn_turanNumber` was initially proved by @Aristotle-Harmonic, then hand-polished.
Co-authored-by: Aristotle (Harmonic) <aristotle-harmonic@harmonic.fun> |
t-combinatorics
tech debt
maintainer-merge
|
45/20 |
Mathlib/Combinatorics/SimpleGraph/Extremal/Turan.lean |
1 |
9 |
['Parcly-Taxel', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
1-43755 1 day ago |
1-44391 1 day ago |
95-20109 95 days |
| 42074 |
felixpernegger author:felixpernegger |
chore(Dynamics): fix defs with underscore |
This PR deprecates all (1) defs with underscore in Dynamics and renames it according to the naming convention.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-dynamics
tech debt
maintainer-merge
|
7/4 |
Mathlib/Dynamics/TopologicalEntropy/Subset.lean |
1 |
2 |
['github-actions', 'grunweg'] |
ADedecker assignee:ADedecker |
1-32628 1 day ago |
1-65375 1 day ago |
1-65725 1 day |
| 42073 |
felixpernegger author:felixpernegger |
chore(FieldTheory): fix defs with underscores |
This PR deprecates all (1) defs with underscore in FieldTheory and renames it according to the naming convention.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
easy
maintainer-merge
label:t-algebra$ |
7/4 |
Mathlib/FieldTheory/Differential/Liouville.lean,Mathlib/FieldTheory/Galois/Basic.lean,Mathlib/FieldTheory/IntermediateField/Basic.lean,Mathlib/FieldTheory/LinearDisjoint.lean |
4 |
3 |
['felixpernegger', 'github-actions', 'grunweg'] |
nobody |
1-32611 1 day ago |
1-65542 1 day ago |
1-66318 1 day |
| 42038 |
grunweg author:grunweg |
chore: make `ModelProd` and `ModelPi` implicit_reducible |
They should not be instance reducible (their entire raison d'être is to be a type synonym
to disambiguate typeclass synthesis), but they can be implicit_reducible just fine.
This allows removing another 10-20 backcompat options.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
tech debt
|
5/17 |
Mathlib/Geometry/Manifold/Algebra/Structures.lean,Mathlib/Geometry/Manifold/ChartedSpace.lean,Mathlib/Geometry/Manifold/Immersion.lean,Mathlib/Geometry/Manifold/IsManifold/Basic.lean,Mathlib/Geometry/Manifold/IsManifold/ExtChartAt.lean,Mathlib/Geometry/Manifold/IsManifold/InteriorBoundary.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/Geometry/Manifold/MFDeriv/UniqueDifferential.lean,Mathlib/Geometry/Manifold/Submersion.lean |
9 |
2 |
['github-actions', 'grunweg'] |
nobody |
1-31794 1 day ago |
1-32480 1 day ago |
1-33872 1 day |
| 40725 |
dennj author:dennj |
chore(SetTheory/Ordinal): execute deprecation TODOs |
This PR resolves several ordinal deprecation TODOs by making the `add_one` spelling primary over the older `succ`-spelled theorem names.
It deprecates the old names, rewires Mathlib uses to the new names, and renames `Cardinal.noMaxOrder` to the more precise `Cardinal.noMaxOrder_ord_toType`. The old deprecated names are no longer used internally.
Code clean up in Ordinal.Notation |
t-set-theory
tech debt
|
121/149 |
Mathlib/CategoryTheory/Presentable/Directed.lean,Mathlib/CategoryTheory/Presentable/OrthogonalReflection.lean,Mathlib/CategoryTheory/Presentable/SharplyLT/Basic.lean,Mathlib/CategoryTheory/SmallObject/IsCardinalForSmallObjectArgument.lean,Mathlib/FieldTheory/CardinalEmb.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Basic.lean,Mathlib/SetTheory/Ordinal/Exponential.lean,Mathlib/SetTheory/Ordinal/FixedPoint.lean,Mathlib/SetTheory/Ordinal/Notation.lean,Mathlib/SetTheory/Ordinal/Principal.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/Ordinal/Veblen.lean |
13 |
14 |
['dennj', 'github-actions', 'mathlib-merge-conflicts', 'plp127', 'vihdzp'] |
alreadydone assignee:alreadydone |
1-6123 1 day ago |
2-42805 2 days ago |
29-35956 29 days |
| 42091 |
felixpernegger author:felixpernegger |
chore(RingTheory): fix `backward.inferInstanceAs.wrap.data` exception |
I am not sure why this works, but specifying the proof (rather def?) `Ideal.Quotient.algebraQuotientMapQuotient` resolves the necessity of the exception.
The `unfold ResidueField` is not necessarily needed. Also, `infer_instance` etc, does not work even after unfolding.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
|
3/2 |
Mathlib/RingTheory/Unramified/LocalRing.lean |
1 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
1-992 1 day ago |
1-1703 1 day ago |
1-1531 1 day |
| 42085 |
felixpernegger author:felixpernegger |
chore: remove redundant `backward.inferInstanceAs.wrap.data` exception |
"Redundant" in the sense that `lake build` succeeds without it, so ought to be removable; especially since the exceptions are counted as strong tech debt.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
0/1 |
Mathlib/Algebra/Category/MonCat/Limits.lean |
1 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
0-11251 3 hours ago |
1-10558 1 day ago |
1-10371 1 day |
| 38534 |
AlexeyMilovanov author:AlexeyMilovanov |
refactor(Computability): bundle PFun into a structure with FunLike instance |
This PR refactors `PFun` from `def PFun α β := α → Part β` to a structure with a `FunLike` instance.
[Discussion](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Fix.20for.20fun_prop.20on.20PFun.20.28context.3A.20Computability.20Theory.29)
### Main changes
* `PFun` is now a structure with a single field `toFun : α → Part β`.
* Added the `FunLike (α →. β) α (Part β)` instance and `initialize_simps_projections`.
* Added the basic projection/application simp lemmas needed for the structure wrapper.
* Definitions which used to return raw lambdas as partial functions now explicitly use `PFun.mk` or `PFun.lift`.
* Equality proofs for partial functions now use `PFun.ext` / `DFunLike.ext` where `funext` no longer applies directly.
### Downstream impact
The refactor mainly impacts Computability Theory and Category Theory (`Category/PartialFun.lean`). Since `PFun` is no longer definitionally equal to `α → Part β`, tactics such as `rfl`, `simp`, and `funext` can no longer always see through the old raw-function representation.
As a result, several proofs (e.g. `fix_aux`, `ppred`, `mem_eval`, and `unitIso`) grew in size, requiring explicit `ext` + `simp` breakdowns. I tried to keep these proof changes minimal; further golfing suggestions are very welcome. It seems that fully recovering the old brevity in some places may require additional `PFun`-specific API/congruence support, which I avoided adding in this PR to keep the diff minimal.
### Affected files
* **Core:** `Mathlib/Data/PFun.lean`
* **Computability:** `Partrec`, `PartrecBasis`, `PartrecCode`, `RE`, `RecursiveIn`, `Ackermann`, `StateTransition`, `TuringDegree`, `TuringMachine/Config`
* **Category Theory:** `Category/PartialFun.lean`
* **Other:** `Data/Finset/PImage.lean`, `NumberTheory/Dioph.lean`
This also removes the previous `set_option linter.flexible false` workaround and the local transparency workaround in `TuringMachine/Config.lean`, as well as the local transparency workarounds in `Category/PartialFun.lean`.
### Note on LLM usage
The core `PFun` change caused numerous downstream errors. I initially used an LLM to help draft fixes for these files. Afterwards, I spent a significant amount of time manually correcting and modifying all of the generated changes.
|
new-contributor
t-computability
tech debt
LLM-generated
|
531/478 |
Mathlib/CategoryTheory/Category/PartialFun.lean,Mathlib/Computability/Ackermann.lean,Mathlib/Computability/Partrec.lean,Mathlib/Computability/PartrecBasis.lean,Mathlib/Computability/PartrecCode.lean,Mathlib/Computability/RE.lean,Mathlib/Computability/RecursiveIn.lean,Mathlib/Computability/StateTransition.lean,Mathlib/Computability/TuringDegree.lean,Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Data/Finset/PImage.lean,Mathlib/Data/PFun.lean,Mathlib/NumberTheory/Dioph.lean |
13 |
27 |
['AlexeyMilovanov', 'JovanGerb', 'YaelDillies', 'dagurtomas', 'github-actions', 'j-loreaux', 'mathlib-bors', 'mathlib-merge-conflicts'] |
YaelDillies assignee:YaelDillies |
0-4286 1 hour ago |
0-4286 1 hour ago |
65-51554 65 days |