Welcome to the mathlib review page. Everybody's help with reviewing is appreciated. Reviewing contributions is important, and everybody is welcome to review pull requests! If you're not sure how, the pull request review guide is there to help you.
This page is the main reviewer-facing queue: if a PR is ready for review, it belongs here. The triage page contains additional triage-oriented views, but it is not the primary review queue.
This page contains tables of
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Updated |
Last status change |
total time in review |
| 39279 |
jayscambler author:jayscambler |
feat(Cryptography/Sigma): Schnorr sigma protocol and signature scheme |
Adds `Mathlib/Cryptography/Sigma/Schnorr.lean`. New file in a new top-level directory; mathlib currently has no `Mathlib/Cryptography/`, so I've taken `Mathlib/Cryptography/Sigma/` as the natural home for sigma-protocol formalizations.
The file proves the three defining properties of Schnorr's identification scheme as a sigma protocol:
- `Schnorr.correct`: completeness. Honest verifier accepts honest signer's transcript.
- `Schnorr.specialSoundness`: from two accepting transcripts sharing the commitment but using different challenges `c, c'`, the witness `x = (s - s') / (c - c')` is recovered. Needs `q` prime so `c - c'` is invertible in `ZMod q`.
- `Schnorr.hvzkAccepts`: the HVZK simulator `g^s · (y^c)⁻¹` always yields accepting transcripts. This is the structural-correctness half of HVZK only; the distributional indistinguishability statement is a separate result and not in this PR.
On top of the sigma protocol there's `Schnorr.Signature.{keyGen, sign, verify, correct}` wrapping it as a Fiat-Shamir signature scheme; `Schnorr.Signature.correct` is a one-line corollary of `Schnorr.correct`.
Two auxiliary lemmas, `Schnorr.gpow_sub` and `Schnorr.gpow_mul`, bridge `ZMod q` arithmetic and group exponentiation under `Fintype.card G = q`. They're local to this file for now because the surrounding `gpow` API is itself cryptography-specific; if a general `ZMod q`-graded group action framework lands in mathlib later, both lemmas would become instances of it.
There's also a small `example` instantiating everything on `Multiplicative (ZMod q)` for `Fact q.Prime` to show the API typechecks. That instantiation is a toy (DLOG is trivial in that group), but it confirms the abstraction is usable.
**AI disclosure**: this PR was a collaboration between myself, Grey Haven's autocontext and Claude Opus 4.7 (Anthropic). I read each line and built locally on current master. (strawberry has three r's) |
new-contributor
LLM-generated
|
352/0 |
Mathlib.lean,Mathlib/Cryptography/Sigma/Schnorr.lean |
2 |
2 |
['github-actions'] |
nobody |
86-12692 2 months ago |
86-12771 86 days ago |
86-13249 86 days |
| 33928 |
jsm28 author:jsm28 |
feat(Combinatorics/Tiling/TileSet): indexed families of tiles |
Define the type `TileSet` for indexed families of tiles (in a discrete context), and some associated definitions (including `symmetryGroup`) and API lemmas.
`TileSet` can be used for tilings of the whole space; for tilings of part of the space; for patches of tiles (extracted from a tiling by considering tiles meeting some set of points, or considered on their own without extracting from a tiling); for multiple tilings (covering the space more than once). In particular, the fact that people study multiple tilings provides a clear justification for using indexed families rather than sets of tiles, and basic definitions and API lemmas generally work for all these different uses of `TileSet` (sometimes with weak constraints such as tiles being finite, nonempty and only having finitely many tiles meeting any point of the space).
Definitions for saying e.g. "this `TileSet` is a tiling of the whole space" are to be included in subsequent files in subsequent PRs.
From AperiodicMonotilesLean.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
460/0 |
Mathlib.lean,Mathlib/Combinatorics/Tiling/TileSet.lean |
2 |
23 |
['Parcly-Taxel', 'b-mehta', 'eric-wieser', 'github-actions', 'jsm28', 'vihdzp'] |
nobody |
80-66973 2 months ago |
205-84081 205 days ago |
205-84069 205 days |
| 35069 |
A-M-Berns author:A-M-Berns |
feat(Geometry/Polygon): simple polygons and boundary map |
This PR introduces Simple polygons with the predicate `IsSimple`, which captures the idea of a non-self-intersecting boundary, in the file Simple.lean. In the file Boundary.lean, a boundary map from `AddCircle n` is defined. I prove that the range of this map is the boundary and that this map is injective if and only if the polygon is simple. I kept Boundary.lean and Simple.lean separate because future results will include stuff just about the boundary map independent of simplicity (e.g. that it is continuous in the appropriate setting) and stuff just about simple polygons independent of the boundary map (e.g. that for n = 3, IsSimple iff HasNondegenerateVertices.) I used Claude Code to help generate some of the proof material, but I golfed and edited all AI contribution.
- [x] depends on: #34598
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
--> |
new-contributor
t-euclidean-geometry
LLM-generated
|
360/0 |
Mathlib.lean,Mathlib/Geometry/Polygon/Boundary.lean,Mathlib/Geometry/Polygon/Simple.lean,Mathlib/Logic/Equiv/Fin/Rotate.lean |
4 |
30 |
['A-M-Berns', 'eric-wieser', 'github-actions', 'joneugster', 'jsm28', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp', 'wwylele'] |
nobody |
76-66974 2 months ago |
163-6429 163 days ago |
165-40703 165 days |
| 36814 |
YaelDillies author:YaelDillies |
refactor(Combinatorics/SimpleGraph): no proof obligation in `rotate` |
If the walk doesn't go through the new vertex, return `nil` instead.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
41/32 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Matching.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean |
7 |
9 |
['SnirBroshi', 'YaelDillies', 'b-mehta', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
73-16072 2 months ago |
73-16149 73 days ago |
135-54252 135 days |
| 39907 |
Hagb author:Hagb |
feat(Order/InititalSeg): `PrincipalSeg` is trichotomous for well orders |
For any two well orders, one is a principal segment of the other, or they are isomorphic.
Suggested by @vihdzp in the review of #39545
https://github.com/leanprover-community/mathlib4/pull/39545#discussion_r3262466782. It may slightly simplify the proof of `infinite_iff_nonempty_relEmbedding_of_isWellOrder`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
7/0 |
Mathlib/Order/InitialSeg.lean |
1 |
1 |
['github-actions', 'vihdzp'] |
nobody |
72-11626 2 months ago |
72-53936 72 days ago |
72-53924 72 days |
| 40185 |
lua-vr author:lua-vr |
feat(Order/Closure): closure_sup_le and sup_closure_le |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
6/0 |
Mathlib/Order/Closure.lean |
1 |
2 |
['github-actions'] |
nobody |
65-18435 2 months ago |
65-18800 65 days ago |
65-18788 65 days |
| 35753 |
Vilin97 author:Vilin97 |
feat(Topology/Algebra/Order): regular grid helpers and piecewise linear interpolation |
Make API for piecewise linear interpolation on regular grids. I need these to for ODE time-stepping methods, like forward Euler, and later Runge–Kutta methods.
Follow-up PR: #35755 (forward Euler method convergence).
I don't know if these numerical analysis ODE-solving methods even belong in mathlib. If someone could advise me on it, I would appreciate it.
---
The initial proof was produced by [Aristotle](https://aristotle.harmonic.fun). The code was iteratively refined (factoring out lemmas, golfing, simplifying proofs) using Claude Code.
- [ ] depends on: #38091 |
t-topology
new-contributor
LLM-generated
maintainer-merge
|
201/0 |
Mathlib.lean,Mathlib/Topology/Algebra/Order/PiecewiseLinear.lean |
2 |
59 |
['Vilin97', 'YanYablonovskiy', 'adomani', 'botbaki-review', 'copilot-pull-request-reviewer', 'dagurtomas', 'eric-wieser', 'github-actions', 'grunweg', 'j-loreaux', 'mathlib-dependent-issues', 'wwylele'] |
nobody |
64-66974 2 months ago |
97-77694 97 days ago |
130-40362 130 days |
| 39449 |
Paul-Lez author:Paul-Lez |
doc: add library note about scoping simp lemmas with weak keys |
In PR #39262 I noticed that some `simp` lemmas were scoped for a reason that is not immediately obvious, so I figured that adding a library note would be nice in case anyone else runs into this in the future (this pattern is quite common in Mathlib!)
In case it's helpful for review, here are links to a few of the PRs that added this scoping initially:
- #14233
- #15620
- #15631
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
71/4 |
Mathlib.lean,Mathlib/Algebra/AddConstMap/Basic.lean,Mathlib/Algebra/CharP/Two.lean,Mathlib/Algebra/GradedMonoid.lean,Mathlib/Algebra/Ring/BooleanRing.lean,Mathlib/Algebra/Ring/CharZero.lean,Mathlib/Tactic.lean,Mathlib/Tactic/SimpLibraryNote.lean |
8 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
63-65133 2 months ago |
63-65133 63 days ago |
76-72873 76 days |
| 40329 |
no-j author:no-j |
feat(Computability): matching εNFA.Path definition with NFA.Path |
Added εNFA.Path definition that is based on `Type` instead of `Prop` to match NFA's path definition
Added εNFA.Path.supp (same definition as NFA.Path.supp)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-computability
new-contributor
|
60/23 |
Mathlib/Computability/EpsilonNFA.lean |
1 |
3 |
['github-actions'] |
nobody |
61-32959 2 months ago |
61-33792 61 days ago |
61-34152 61 days |
| 40336 |
Bergschaf author:Bergschaf |
feat(Order/Sublocales): definition of open sublocales |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
49/7 |
Mathlib/Order/Sublocale.lean |
1 |
3 |
['Bergschaf', 'github-actions'] |
nobody |
60-8325 1 month ago |
60-21412 60 days ago |
60-21855 60 days |
| 40274 |
gasparattila author:gasparattila |
chore(Order/Partition/Finpartition): deprecate `ofPairwiseDisjoint` |
This is a duplicate of `Finpartition.ofErase`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
8/16 |
Mathlib/MeasureTheory/VectorMeasure/Variation/Basic.lean,Mathlib/Order/Partition/Finpartition.lean |
2 |
2 |
['gasparattila', 'github-actions'] |
nobody |
59-43363 1 month ago |
62-81607 62 days ago |
62-81595 62 days |
| 40438 |
tb65536 author:tb65536 |
feat(RingTheory/Spectrum/Prime/Basic): pointwise action on prime spectrum |
This PR defines the pointwise action on the prime spectrum.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
15/0 |
Mathlib/RingTheory/Spectrum/Prime/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
58-73094 1 month ago |
58-73142 58 days ago |
58-73130 58 days |
| 40472 |
karlesmarin author:karlesmarin |
feat(Combinatorics/SimpleGraph): oriented incidence matrix and the La… |
# feat(Combinatorics/SimpleGraph): oriented incidence matrix and the Laplacian factorization
## Summary
Adds the **oriented incidence matrix** of a simple graph and the standard **Gram factorization
of the graph Laplacian**:
- **`SimpleGraph.orientedIncMatrix R : Matrix α (Sym2 α) R`** — in the column of an edge
`e = s(u, w)` with `u < w`: `+1` at row `w` (the larger endpoint), `-1` at row `u`, `0`
elsewhere; columns of non-edges are zero. Orientation induced by a `LinearOrder` on the
vertex type.
- **`SimpleGraph.orientedIncMatrix_mul_transpose`** — `N * Nᵀ = G.lapMatrix R` (= `D − A`).
- Supporting API mirroring `incMatrix`: `orientedIncMatrix_apply`,
`orientedIncMatrix_of_notMem_incidenceSet`, `orientedIncMatrix_mul_self`
(the square of an entry is the unoriented `incMatrix` entry), and the two sign lemmas
`orientedIncMatrix_apply_mul_apply_of_adj` (product of the two endpoint entries = `-1`),
`orientedIncMatrix_apply_add_apply_of_adj` (their sum = `0`), plus
`orientedIncMatrix_apply_mul_apply_of_ne` (vanishing away from the common edge).
## Why
Mathlib has the unoriented `G.incMatrix`, whose Gram matrix is the **signless** Laplacian
`D + A` (`incMatrix_mul_transpose_diag` ff.), and it has `G.lapMatrix = D − A` with its kernel
theory — but no object connecting the two. The oriented incidence matrix is that object, and
`N Nᵀ = D − A` is the factorization behind: positive semidefiniteness of the Laplacian as a
Gram fact, Kirchhoff/matrix-tree determinant arguments (via Cauchy–Binet on the reduced
factorization), and total unimodularity of incidence matrices.
## Design notes
- The fixed smaller→larger orientation is harmless: any orientation gives the same Gram matrix
(each edge contributes `(±1)²` on the diagonal and `(+1)(−1)` off it). This is stated in the
module docstring; no orientation-genericity machinery is introduced.
- The headline proof is entrywise: the diagonal reduces to `sum_incMatrix_apply` (= degree)
through `orientedIncMatrix_mul_self`; an off-diagonal `(u, w)` entry is supported on the
single column `s(u, w)`, handled by `Finset.sum_eq_single` and the sign lemmas.
- `[Ring R]` for the API section (signs need negation); the definition itself only needs
`[Zero R] [One R] [Neg R]`.
## Files / placement
- `Mathlib/Combinatorics/SimpleGraph/OrientedIncMatrix.lean` (new)
- `Mathlib.lean` (+1 import line)
## Verification
- `lake env lean` on the file: clean, zero warnings.
- `#print axioms SimpleGraph.orientedIncMatrix_mul_transpose` → 3 standard axioms.
- The factorization and the downstream matrix-tree chain were validated numerically in exact
arithmetic (SageMath) before formalization.
Downstream context: DOI [10.5281/zenodo.20629746](https://doi.org/10.5281/zenodo.20629746).
|
new-contributor
LLM-generated
|
157/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/OrientedIncMatrix.lean |
2 |
1 |
['github-actions'] |
nobody |
58-5914 1 month ago |
58-10991 58 days ago |
58-11072 58 days |
| 40502 |
metakunt author:metakunt |
feat(RingTheory/RootsOfUnits/PrimitiveRoots): pow_div_gcd |
From #39404 |
t-ring-theory |
13/11 |
Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean |
1 |
2 |
['github-actions', 'tb65536'] |
nobody |
57-13592 1 month ago |
57-14474 57 days ago |
57-15035 57 days |
| 40520 |
Julian-Kuelshammer author:Julian-Kuelshammer |
feat(CategoryTheory/Linear): linear Yoneda and coYoneda are linear |
Mathlib/CategoryTheory/Linear/Basic.lean:
Adds an instance that the opposite category of a linear category is linear.
Mathlib/CategoryTheory/Linear/Yoneda.lean:
Adds instances that the linearYoneda and linearcoYoneda are linear functors, which was a TODO before.
---
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
|
27/2 |
Mathlib/CategoryTheory/Linear/Basic.lean,Mathlib/CategoryTheory/Linear/Yoneda.lean |
2 |
3 |
['github-actions'] |
nobody |
56-76287 1 month ago |
56-77723 56 days ago |
56-78244 56 days |
| 38225 |
kim-em author:kim-em |
ci: block merging PRs with large import increases unless reviewed |
This PR makes the existing `large-import` label into a merge gate. PRs that significantly increase transitive imports (>2% for any modified file) are now blocked from merging until a reviewer adds the `allow-large-import` label.
### Why three labels?
Bors's `block_labels` has no conditional logic — if a label is in the list, merge is blocked unconditionally. We need "blocked unless a reviewer has approved", i.e. `large-import ∧ ¬allow-large-import`. Since bors can't express that, we use a derived label:
| Label | Managed by | Purpose |
|---|---|---|
| `large-import` | `build` job (import analysis) | Factual: this PR increases imports |
| `blocked-by-large-import` | `check-large-import` job | Operational: blocks bors |
| `allow-large-import` | Reviewer | Override: reviewer approves the increase |
Each label is managed by exactly one actor, so there is no label-fighting.
### How it works
1. The existing `build` job adds/removes `large-import` based on import analysis (unchanged).
2. A new `check-large-import` job (in the same workflow) waits for `build` to finish, then:
- If `large-import` is present and `allow-large-import` is absent → adds `blocked-by-large-import`
- Otherwise → removes `blocked-by-large-import`
3. `blocked-by-large-import` is added to `block_labels` in `bors.toml`.
When a reviewer adds `allow-large-import`, the `labeled` event re-triggers the workflow. The heavy `build` job is skipped (guarded by `github.event.action != 'labeled'`), but the lightweight `check-large-import` job runs, sees both labels, and removes `blocked-by-large-import`. Bors can now merge.
### Reviewer workflow
The CI failure message tells the reviewer to consider whether the PR could be improved by splitting files, rearranging material, or creating new intermediate files. If the import increase is reasonable, they add `allow-large-import`.
False positives can be reported on the [mathlib4 Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/large-import.20label).
🤖 Prepared with Claude Code |
CI |
78/2 |
.github/workflows/PR_summary.yml,bors.toml |
2 |
7 |
['SnirBroshi', 'github-actions', 'jcommelin', 'joneugster', 'kim-em'] |
nobody |
56-66974 1 month ago |
108-71724 108 days ago |
108-72330 108 days |
| 40495 |
gw90 author:gw90 |
feat: weighted graphs with killing term |
Adding basic definitions and API for weighted graphs and weighted graphs with killing term.
---
My goal is to develop the basic theory from the beginning of [this textbook](https://www.math.uni-potsdam.de/fileadmin/user_upload/Prof-GraphTh/Keller/KellerLenzWojciechowski_GraphsAndDiscreteDirichletSpaces_wu_version.pdf). I also have some definitions and lemmas regarding Dirichlet forms and Laplacians to PR later, but I tried to pare down this first PR as much as possible. It currently has only 4 main definitions and sufficient API to demonstrate their correctness.
Note that I did not use [SimpleGraph.edgeLabeling](https://leanprover-community.github.io/mathlib4_docs/find/?pattern=SimpleGraph.EdgeLabeling#doc) for the edgeWeight function because it is important that vertices that are not adjacent have an edge weight of zero. That is, the edgeWeight must be defined for all pairs of vertices and respect the underlying adjacency relation on the graph.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
368/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Weighted/Basic.lean,docs/references.bib |
3 |
2 |
['github-actions'] |
nobody |
54-79902 1 month ago |
56-65537 56 days ago |
56-65525 56 days |
| 40612 |
kim-em author:kim-em |
feat: add Jacobian challenge based test for new `def_wanted` feature |
This PR adds tests for the new features introduced in batteries#1818, i.e. `def_wanted`, and the ability to safely refer to other `*_wanted` statements from within a `*_wanted` statement. We use the Jacobian challenge as the example. |
|
86/0 |
MathlibTest/JacobianChallenge.lean |
1 |
1 |
['github-actions'] |
nobody |
53-53831 1 month ago |
53-57292 53 days ago |
53-57280 53 days |
| 40532 |
tb65536 author:tb65536 |
feat(Combinatorics/Hypergraph/Basic): define linear hypergraphs |
This PR defines linear hypergraphs (hypergraphs where any two edges share at most one vertex).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/0 |
Mathlib/Combinatorics/Hypergraph/Basic.lean |
1 |
6 |
['SnirBroshi', 'github-actions', 'tb65536'] |
nobody |
53-37116 1 month ago |
56-11540 56 days ago |
56-54494 56 days |
| 40531 |
tb65536 author:tb65536 |
feat(Combinatorics/Hypergraph/Coloring): define hypergraph colorings |
This PR defines hypergraph colorings and the chromatic index of a hypergraph.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
66/0 |
Mathlib.lean,Mathlib/Combinatorics/Hypergraph/Coloring/Edge.lean |
2 |
4 |
['SnirBroshi', 'b-mehta', 'github-actions', 'tb65536'] |
nobody |
53-29455 1 month ago |
53-30328 53 days ago |
53-78449 53 days |
| 40639 |
metakunt author:metakunt |
feat(Combinatorics/MixedGraph): adds mixed graphs and some example API |
This PR is intended to gather some feedback. I'd like to introduce mixed graphs into mathlib as a generalisation of the graph api.
I didn't know whether to change the API of the graphs so I experimented a bit and ported some results as a proof of concept.
Zulip discussion: https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Mixed.20multigraphs/with/602794133
|
t-combinatorics |
186/0 |
Mathlib.lean,Mathlib/Combinatorics/Mixedgraph/Basic.lean |
2 |
2 |
['github-actions'] |
nobody |
53-12395 1 month ago |
53-13258 53 days ago |
53-13729 53 days |
| 38606 |
dennj author:dennj |
feat: preparation for Vanishing Sum of Roots of Unity |
Adds the Mathlib API extensions needed for an upcoming formalization of the Lam-style classification theorem for vanishing sums of roots of unity.
* Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean
+ `exists_eq_const_of_sum_smul_eq_zero_of_sum_eq_zero_of_linearIndependent`: if `∑ vᵢ = 0` and the first `n-1` of `n` vectors are linearly independent, every linear relation has constant coefficients.
* Mathlib/RingTheory/Radical/NatInt.lean
+ `Nat.totient_eq_div_radical_mul_totient_radical`: Euler's totient splits as `φ(n) = (n / rad n) * φ(rad n)`.
* Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean
+ `IsPrimitiveRoot.sum_range_pow_mul_div_eq_zero_of_dvd`: the `d` evenly-spaced powers of a primitive `k`-th root sum to zero, for `d ∣ k` and `1 < d`.
* Mathlib/NumberTheory/Cyclotomic/LinearDisjoint.lean (new)
+ `IsPrimitiveRoot.linearDisjoint_adjoin_pow_of_coprime`: cyclotomic subfields of coprime orders are linearly disjoint over `ℚ`.
* Mathlib/NumberTheory/Cyclotomic/LinearRelations.lean (new)
+ `IsPrimitiveRoot.coeffs_eq_of_sum_pow_eq_zero_prime_coprime`: in the cyclotomic field of order `p * m` with `p` prime coprime to `m`, any `ℚ⟮ζ^p⟯`-linear relation among powers of `ζ^m` has all coefficients equal.
---
I need these as preparation to start formalizing the theorem:
Let k be a positive integer. If a finite family of complex k-th roots of unity sums to zero, then the size of the family is a non-negative integer combination of the prime divisors of k.
---
Human-made PR with AI used for golfing and documentation |
new-contributor |
219/0 |
Mathlib.lean,Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean,Mathlib/NumberTheory/Cyclotomic/LinearDisjoint.lean,Mathlib/NumberTheory/Cyclotomic/LinearRelations.lean,Mathlib/RingTheory/Radical/Totient.lean,Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean |
6 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
50-66329 1 month ago |
50-68379 50 days ago |
59-13615 59 days |
| 37183 |
dagurtomas author:dagurtomas |
feat(Tactic/CategoryTheory): map attribute |
Adding `@[map]` to a lemma named `H` of shape `∀ .., f = g`, where `f` and `g` are morphisms
in some category `C`, creates a new lemma named `H_map` of the form
`∀ .. {D} (func : C ⥤ D), F.map f = F.map g` and then applies
`simp only [Functor.map_comp, Functor.map_id]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
LLM-generated
t-meta
t-category-theory
|
301/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/CategoryTheory/Map.lean,MathlibTest/CategoryTheory/Map.lean,MathlibTest/CategoryTheory/MapSimp.lean |
5 |
13 |
['adamtopaz', 'dagurtomas', 'github-actions', 'joelriou'] |
nobody |
49-66967 1 month ago |
71-48603 71 days ago |
134-12570 134 days |
| 40791 |
vvvv-ops author:vvvv-ops |
feat(RingTheory/DedekindDomain): dirichlet's s-unit theorem |
Proves the `Future work` of `RingTheory/DedekindDomain/SInteger.lean`: finite generation of `S`-units and Dirichlet's `S`-unit theorem.
For a Dedekind domain `R` with fraction field `K` and a finite set `S` of height-one primes, this adds the `S`-valuation map `Set.unitValuation` with kernel the `∅`-units (`Set.unitValuation_ker`), finite generation `Set.unit_fg`, and the exact rank `Set.finrank_eq`: `finrank ℤ (Additive 𝒪_{K,S}ˣ) = finrank ℤ (Additive 𝒪_Kˣ) + |S|`, plus the number-field specialisation `Set.unit_finrank_numberField` (`= (r₁ + r₂ - 1) + |S|`). The proof uses the short exact sequence `1 → 𝒪_Kˣ → 𝒪_{K,S}ˣ → ⊕_{v∈S} ℤ`: the kernel is the units, and the image has finite index because its cokernel embeds in the (finite) class group.
The general finiteness helpers `Module.Finite.of_fg_ker_of_fg_range`, `CommGroup.fg_of_fg_ker_of_fg_range`, `Subgroup.fg_of_fg_commGroup` are included in the file for now — happy to move them to `RingTheory/Finiteness` / `GroupTheory/Finiteness` if preferred.
|
t-ring-theory
new-contributor
|
339/0 |
Mathlib.lean,Mathlib/RingTheory/DedekindDomain/SUnit.lean,scripts/noshake.json |
3 |
3 |
['github-actions'] |
nobody |
49-52095 1 month ago |
49-54983 49 days ago |
49-54971 49 days |
| 40759 |
CoolRmal author:CoolRmal |
feat(Order): a sequence converges if every subsequence has a further convergent subsequence |
This PR proves `tendsto_of_forall_filter_le_exists_tendsto`, which is the filter version of the theorem in the title: if for any filter `m ≤ l₁`, there exists a nontrivial filter `n ≤ m` such that `f` converges to `l₂` along `n`, then `f` converges to `l₂` along `l₁`.
Mostly generated in a chat with GPT Pro 5.5. Polished and reviewed by me.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
10/0 |
Mathlib/Order/Filter/Tendsto.lean |
1 |
4 |
['CoolRmal', 'attilavjda', 'github-actions'] |
nobody |
48-61809 1 month ago |
48-63967 48 days ago |
50-7385 50 days |
| 39427 |
Hagb author:Hagb |
feat(Order/Interval/Finset/Defs): `LocallyFiniteOrder{Bot,Top}` implies `WellFounded{LT,GT}` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39547
[](https://gitpod.io/from-referrer/)
|
t-order |
11/0 |
Mathlib/Order/Interval/Finset/Defs.lean |
1 |
5 |
['Hagb', 'github-actions', 'leanprover-radar', 'mathlib-dependent-issues'] |
nobody |
46-82084 1 month ago |
46-83807 46 days ago |
47-1422 47 days |
| 40876 |
vihdzp author:vihdzp |
chore: deprecate `StrictMono.not_bddAbove_range_of_wellFoundedLT` → `StrictMono.isCofinal_range` |
In a linear order without a maximum, the statements `¬ BddAbove s` and `IsCofinal s` are equivalent. The `IsCofinal` version of this theorem works even without the `NoMaxOrder` assumption, so it is strictly more general.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
18/1 |
Mathlib/Order/Cofinal.lean,Mathlib/Order/WellFounded.lean,Mathlib/SetTheory/Ordinal/Enum.lean |
3 |
5 |
['SnirBroshi', 'github-actions', 'vihdzp'] |
nobody |
46-59449 1 month ago |
46-77474 46 days ago |
46-77660 46 days |
| 36743 |
Jun2M author:Jun2M |
feat(Combinatorics/GraphLike): introduce `GraphLike` typeclass |
Edit: There is #40204: alternative PR that uses incidence to define hypergraph.
Per discussion at ([#graph theory > HasAdj](https://leanprover.zulipchat.com/#narrow/channel/252551-graph-theory/topic/HasAdj/with/575843445)), This PR introduces the `GraphLike` typeclass to capture the notions like `dart` and `walk` across various graph objects, such as `SimpleGraph`, `Graph`, and `Digraph`.
The goal is that by abstracting these core components into a typeclass, we can prove these results once for all graph-like structures rather than duplicating them across different graph types.
### Main definitions
* `GraphLike V D E Gr`: A typeclass parameterized by a vertex type `V`, dart type `D` and a graph type `Gr` (with `V`, `D` & `E` as an `outParam`).
* `GraphLike.verts : Set V`: The set of vertices of the graph.
* `GraphLike.darts : Set D`: The set of darts of the graph.
* `GraphLike.edges : Set E`: The set of edges of the graph.
* `GraphLike.Adj : V → V → Prop`: The adjacency relation, defined by default as `∃ d ∈ darts, fst d = u ∧ snd d = v`.
---
This PR generalises #35776 to also unify `Graph`.
PRs depending on this PR are
#39047 (graphLike with no multi edges) => #39050 (Digraph is graphLike)
||
V
#36829 (undirected graphLike) => #39053 (Graph is graphLike) & #39054 (Simplegraph is graphLike)
||
V
#36756 (def of walk on GraphLike) => #36971 (change Simplegraph to use GraphLike walk)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
104/0 |
Mathlib.lean,Mathlib/Combinatorics/GraphLike/Basic.lean |
2 |
78 |
['IvanRenison', 'Jun2M', 'SnirBroshi', 'YaelDillies', 'github-actions', 'lauramonk', 'mathlib-merge-conflicts'] |
nobody |
45-66974 1 month ago |
91-11377 91 days ago |
142-9781 142 days |
| 40387 |
tb65536 author:tb65536 |
feat(RingTheory/Invariant/Basic): inertia subgroup of a quotient group |
This PR proves that the inertia subgroup of a quotient group is the image of the inertia subgroup.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #40383
- [x] depends on: #40385
- [x] depends on: #40386
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
68/0 |
Mathlib/RingTheory/Invariant/Basic.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues', 'xroblot'] |
nobody |
45-12192 1 month ago |
45-16893 45 days ago |
45-21234 45 days |
| 40757 |
tb65536 author:tb65536 |
feat(RingTheory/Ideal/Pointwise): add `Ideal.inertia_smul` |
This PR adds `Ideal.inertia_smul` stating that inertia subgroups of conjugate ideals are conjugate.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
15/5 |
Mathlib/RingTheory/Ideal/Defs.lean,Mathlib/RingTheory/Ideal/Pointwise.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
43-38624 1 month ago |
43-40299 43 days ago |
49-84229 49 days |
| 40967 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Paths): some lemmas about inducing walks |
Could also be done via `SimpleGraph.Walk.map_induce`, but I thought that doing it directly is not much worse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
|
48/0 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean,Mathlib/Data/List/Nodup.lean |
3 |
2 |
['github-actions'] |
nobody |
41-52144 1 month ago |
45-1970 45 days ago |
45-2043 45 days |
| 41066 |
BryceT233 author:BryceT233 |
feat(RingTheory/Jacobson/Ideal): surjective `RingHom` and `IsLocalHom` |
This is a split of #41064 which shows that a surjective `RingHom` is a local homomorphism if and only if its kernel is contained in the jacobson radical of the ring.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
24/16 |
Mathlib/RingTheory/Henselian.lean,Mathlib/RingTheory/Jacobson/Ideal.lean |
2 |
2 |
['BryceT233', 'github-actions'] |
nobody |
41-44047 1 month ago |
41-44988 41 days ago |
42-41269 42 days |
| 38841 |
SnirBroshi author:SnirBroshi |
feat(Mathlib/Order/SuccPred/Limit): more `WithTop` lemmas about `IsMin`/`CovBy`/`IsSuccLimit` |
---
Continues the work from #38244
We should probably also have such lemmas for `WithTopBot`/`WithBotTop`, but that's for another day
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
122/31 |
Mathlib/Order/Cover.lean,Mathlib/Order/SuccPred/Limit.lean,Mathlib/Order/WithBot.lean |
3 |
4 |
['SnirBroshi', 'github-actions', 'vihdzp'] |
nobody |
41-19275 1 month ago |
66-572 66 days ago |
97-37978 97 days |
| 39747 |
vihdzp author:vihdzp |
feat: intervals `Ici`/`Ioi` are cofinal/closed under directed suprema |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
67/11 |
Mathlib/Order/Cofinal.lean,Mathlib/Order/DirSupClosed.lean,Mathlib/Order/Interval/Set/Basic.lean,Mathlib/Order/UpperLower/Basic.lean,Mathlib/Topology/Order/ScottTopology.lean |
5 |
16 |
['YaelDillies', 'b-mehta', 'github-actions', 'vihdzp'] |
nobody |
41-19032 1 month ago |
75-15573 75 days ago |
75-79931 75 days |
| 39783 |
SnirBroshi author:SnirBroshi |
feat(Order/Interval/Finset): `Set.ncard` lemmas for `LocallyFiniteOrder` |
Followup to #39414 which untagged `Fintype.card_I??` as `@[simp]`.
Adds `Cardinal.mk`/`Set.encard`/`Set.ncard` lemmas for the 8 interval sets `Set.I??` (= 24 lemmas),
that convert them to `Finset.card` over the corresponding `Finset.I??` from a `LocallyFiniteOrder` instance.
---
`simp`? I think it's a bit strange since the `LocallyFiniteOrder` instance could have crazy definitions for the finset intervals which aren't "simpler", though the instances we currently have are simple.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
115/0 |
Mathlib.lean,Mathlib/Order/Interval/Finset/Card.lean |
2 |
1 |
['github-actions'] |
nobody |
41-18962 1 month ago |
75-11471 75 days ago |
75-11758 75 days |
| 40561 |
iosephusferrum author:iosephusferrum |
feat(ModelTheory): quantifier elimination for first-order theories |
This PR introduces `HasQuantifierElimination` for first-order languages, along with some standard criteria to establish it for any language that satisfies them and prerequisite formalization `mathlib4` required on elementary extension pairs (`IsElementaryExtensionPair`) and < κ-generated substructures (`CardinalLTGenerated`). It also states and proves that the first-order theory DLO (dense linear order without endpoints) has quantifier elimination (`dlo_hasQuantifierElimination`), using the newly formalized quantifier elimination criteria.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Salih Erdem Koçak <saliherdemkd@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
---
[](https://gitpod.io/from-referrer/)
Please note that we have utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are directly "translated" from human-language source material (check the diff in `references.bib`) to Lean proofs using mentioned AI tools. However, all design/formalization decisions are made by us. |
new-contributor
LLM-generated
|
976/7 |
Mathlib.lean,Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/ElementaryExtensionPair.lean,Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/Order.lean,Mathlib/ModelTheory/PartialEquiv.lean,Mathlib/ModelTheory/QuantifierElimination.lean,Mathlib/ModelTheory/Semantics.lean,Mathlib/ModelTheory/Substructures.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean,docs/references.bib |
11 |
6 |
['erdkocak', 'felixpernegger', 'github-actions'] |
nobody |
40-76272 1 month ago |
55-78882 55 days ago |
55-79156 55 days |
| 41134 |
martinwintermath author:martinwintermath |
feat(Algebra/Order/Nonneg): add `Nonneg` for nonnegative subtype |
Currently the nonnegative subtype is denoted `{x : R // 0 ≤ x}` which has a tendency to be used inconsistently and does not print well. This PR introduces
```lean4
/- The subtype of nonnegative elements. -/
abbrev Nonneg (α : Type*) [Zero α] [LE α] := { x : α // 0 ≤ x }
```
and replaces `{x : R // 0 ≤ x}` by `Nonneg R` throughout mathlib.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
114/110 |
Mathlib/Algebra/Order/Archimedean/Basic.lean,Mathlib/Algebra/Order/Module/Defs.lean,Mathlib/Algebra/Order/Nonneg/Basic.lean,Mathlib/Algebra/Order/Nonneg/Field.lean,Mathlib/Algebra/Order/Nonneg/Floor.lean,Mathlib/Algebra/Order/Nonneg/Module.lean,Mathlib/Algebra/Order/Nonneg/Ring.lean,Mathlib/Analysis/Convex/Cone/Basic.lean,Mathlib/Analysis/Convex/Segment.lean,Mathlib/Data/NNReal/Defs.lean,Mathlib/Geometry/Convex/Cone/Dual.lean,Mathlib/Geometry/Convex/Cone/Pointed.lean,Mathlib/MeasureTheory/Function/SimpleFuncDenseLp.lean,Mathlib/MeasureTheory/Integral/SetToL1.lean,Mathlib/RingTheory/Finiteness/Basic.lean,Mathlib/Topology/Algebra/Field.lean,Mathlib/Topology/Algebra/Order/Module.lean |
17 |
3 |
['SnirBroshi', 'github-actions', 'martinwintermath'] |
nobody |
39-72840 1 month ago |
39-75251 39 days ago |
39-77475 39 days |
| 41137 |
plp127 author:plp127 |
fix: include `[NPow F]` in `FunLike.monoidWithZero` |
Include a `NPow` assumption in `FunLike.monoidWithZero` and `FunLike.semiring` and `FunLike.ring` instead of using `npowRec`. See https://github.com/leanprover-community/mathlib4/pull/37779#discussion_r3399574849.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
18/8 |
Mathlib/Data/FunLike/Ring.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
39-59653 1 month ago |
39-61143 39 days ago |
39-61212 39 days |
| 40826 |
felixpernegger author:felixpernegger |
feat(ci): autolabel PRs with "Generated with Claude Code" |
When one tells Claude code to open a PR, it will usually end the description with "🤖 Generated with [Claude Code](https://claude.com/claude-code)" (Im sure almost everyone will have seen this at this point).
This PR adds an action that will autolabel PRs with that ending as "LLM-generated", which might save a bit of time.
[List of all such PRs to mathlib](https://github.com/leanprover-community/mathlib4/pulls?q=is%3Apr+%F0%9F%A4%96+Generated+with+Claude+Code+)
(Ironically enough, I made this PR with Codex...)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
CI
LLM-generated
|
44/0 |
.github/workflows/label_llm_generated.yml,docs/workflows.md |
2 |
6 |
['SnirBroshi', 'felixpernegger', 'github-actions', 'joneugster'] |
nobody |
38-62864 1 month ago |
48-82420 48 days ago |
48-82753 48 days |
| 41188 |
Scarlett-le author:Scarlett-le |
feat(Geometry/Euclidean): obtuse and right angle criteria from inner product sign |
This PR adds criteria characterising when an unoriented angle is at least, or
strictly greater than, `π / 2`, in terms of the sign of an inner product or a
comparison of squared distances. They are the obtuse/right-angle counterparts of
the existing equality results `InnerProductGeometry.inner_eq_zero_iff_angle_eq_pi_div_two`
and the if-and-only-if Pythagorean theorem
`EuclideanGeometry.dist_sq_eq_dist_sq_add_dist_sq_iff_angle_eq_pi_div_two`.
### New lemmas
`Mathlib/Analysis/SpecialFunctions/Trigonometric/Inverse.lean`
- `Real.pi_div_two_le_arccos : π / 2 ≤ arccos x ↔ x ≤ 0`
- `Real.pi_div_two_lt_arccos : π / 2 < arccos x ↔ x < 0`
Duals of the existing `Real.arccos_le_pi_div_two` / `Real.arccos_lt_pi_div_two`,
both `@[simp]`.
`Mathlib/Geometry/Euclidean/Angle/Unoriented/Basic.lean`
- `InnerProductGeometry.inner_nonpos_iff_pi_div_two_le_angle`
- `InnerProductGeometry.inner_neg_iff_pi_div_two_lt_angle`
`Mathlib/Geometry/Euclidean/Angle/Unoriented/RightAngle.lean`
- `EuclideanGeometry.dist_sq_add_dist_sq_le_dist_sq_iff_pi_div_two_le_angle` |
|
41/0 |
Mathlib/Analysis/SpecialFunctions/Trigonometric/Inverse.lean,Mathlib/Geometry/Euclidean/Angle/Unoriented/Basic.lean,Mathlib/Geometry/Euclidean/Angle/Unoriented/RightAngle.lean |
3 |
1 |
['github-actions'] |
nobody |
38-34078 1 month ago |
38-35924 38 days ago |
38-35912 38 days |
| 41217 |
Probablism author:Probablism |
feat(SimpleGraph/Matching): add graph-level IsMatching |
Closes #11911.
This adds a graph-level `SimpleGraph.IsMatching` predicate. It is support-based, so isolated
vertices are allowed: every vertex in the graph support is incident to exactly one edge.
The existing `Subgraph.IsMatching` predicate is unchanged. I added compatibility lemmas relating it
to `M.spanningCoe`, including an iff characterizing the subgraph predicate as graph-level matching
plus `M.support = M.verts`.
Validation:
- `lake env lean Mathlib/Combinatorics/SimpleGraph/Matching.lean`
- `lake build Mathlib.Combinatorics.SimpleGraph.Matching`
- `lake build Mathlib.Combinatorics.SimpleGraph.Hall Mathlib.Combinatorics.SimpleGraph.Tutte Mathlib.Combinatorics.SimpleGraph.UniversalVerts`
- `lake exe lint-style Mathlib/Combinatorics/SimpleGraph/Matching.lean`
- `lake build Mathlib`
- `lake test`
AI assistance: OpenAI Codex assisted with testing and validation.
|
t-combinatorics
new-contributor
|
41/3 |
Mathlib/Combinatorics/SimpleGraph/Matching.lean |
1 |
4 |
['Probablism', 'SnirBroshi', 'github-actions'] |
nobody |
37-69505 1 month ago |
37-70694 37 days ago |
37-70682 37 days |
| 38292 |
kim-em author:kim-em |
feat(AlgebraicTopology): universal cover construction |
This PR constructs the universal cover of a path-connected, locally path-connected, semilocally simply connected space `X` as the based-path space modulo endpoint-preserving homotopy, topologised by coinduction from the compact-open based-path space.
Split across five files:
* `Topology/Homotopy/TubeNeighborhood.lean` — class-free machinery: `IsPathHomotopyTrivial`, tube neighborhoods in path space, their openness in the compact-open topology, and the ladder-homotopy pasting argument showing any two paths in a common tube are homotopic.
* `AlgebraicTopology/FundamentalGroupoid/SemilocallySimplyConnected.lean` — `SemilocallySimplyConnectedAt/On/Space`, defined via the classical based condition (trivial `π₁(U, x) → π₁(X, x)`), with the unbased upgrade on locally path-connected spaces, and discreteness of `Path.Homotopic.Quotient`.
* `AlgebraicTopology/FundamentalGroupoid/BasedPath.lean` — the based-path space (with `FunLike`/`ContinuousEval` instances) and the path-component machinery of `endpoint ⁻¹' U`.
* `AlgebraicTopology/FundamentalGroupoid/UniversalCover/Basic.lean` — quotient topology, `proj`, and the sheet decomposition.
* `AlgebraicTopology/FundamentalGroupoid/UniversalCover/Covering.lean` and `Action.lean` — `isCoveringMap`, `pathConnectedSpace`, `simplyConnectedSpace`, the universal lifting property, and the free, properly discontinuous `π₁(X, x₀)`-action making `proj` a quotient covering map.
I want to note this takes a different approach than Hatcher et al, which build the universal cover as the path space, but with a "custom" topology. It is then a theorem (often not proved in textbooks) that with the usual hypotheses this topology coincides with the one coinduced from the compact-open topology. I decided that "the mathlib way" was just to start with the "natural" topology, and not take this shortcut.
🤖 Prepared with Claude Code and Codex.
|
|
2831/35 |
Mathlib.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/BasedPath.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/Basic.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/FundamentalGroup.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/SemilocallySimplyConnected.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/UniversalCover/Action.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/UniversalCover/Basic.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/UniversalCover/Covering.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/Homotopy/Path.lean,Mathlib/Topology/Homotopy/TubeNeighborhood.lean,Mathlib/Topology/Path.lean,Mathlib/Topology/Subpath.lean,Mathlib/Topology/UnitInterval.lean |
14 |
50 |
['github-actions', 'kim-em', 'mathlib-merge-conflicts'] |
nobody |
37-59316 1 month ago |
37-60681 37 days ago |
37-60669 37 days |
| 40768 |
AlexeyMilovanov author:AlexeyMilovanov |
Add a reachability characterization for PFun.fix |
Add a `ReflTransGen` characterization of `PFun.fix` and use it to simplify one Turing machine proof. |
new-contributor |
27/13 |
Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Data/PFun.lean |
2 |
2 |
['github-actions'] |
nobody |
37-24480 1 month ago |
37-24480 37 days ago |
37-24468 37 days |
| 35669 |
SnirBroshi author:SnirBroshi |
feat(Mathlib/Data/Finset/Mex): `sInf sᶜ ≤ s.encard` |
---
It's in a separate file because I couldn't find a sensible place with the required imports, not because "mex" is particularly interesting.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #35821
- [x] depends on: #35822
[](https://gitpod.io/from-referrer/)
|
t-order |
59/0 |
Mathlib.lean,Mathlib/Data/Finset/Mex.lean |
2 |
14 |
['SnirBroshi', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
37-15034 1 month ago |
37-15580 37 days ago |
41-18022 41 days |
| 38432 |
SnirBroshi author:SnirBroshi |
feat(Logic/Relation): `Map r f g ≤ s ↔ r ≤ s.bicompl f g` |
and the dual `s ≤ Relation.Map r f g ↔ s.bicompl f g ≤ r` which requires `f` and `g` to be bijective.
Adds `Galois{Connection/Insertion/Coinsertion}` for the dual.
The theorems are specialized to `onFun` instead of `bicompl` for when `f = g`.
A `GaloisConnection` for the iff in the title requires `f`/`g` to be bijective, but then we can get an `OrderIso` which is stronger (see #38499).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
126/28 |
Mathlib/Logic/Relation.lean,Mathlib/Order/GaloisConnection/Basic.lean |
2 |
5 |
['SnirBroshi', 'github-actions', 'plp127'] |
nobody |
37-12120 1 month ago |
37-15162 37 days ago |
105-32800 105 days |
| 40193 |
BoltonBailey author:BoltonBailey |
chore(1000.yaml): add entries |
This PR adds data on a number of previously missing entries to 1000.yaml that were found during the course of Project Numina's preparation of LeanTriathlon.
These include:
- `comment`s with references to formalized statements of theorems (mostly from the formal-conjectures repo) in cases where they exist, (it seems that, while we can add unproven statements and statements from other repos, we can't really include unproven statements from other repos using the system as it currently exists)
- `comment`s about related definitions to certain theorems in mathlib.
- `url` references to a few complete formalizations in a variety of other repositories.
- `decl` for the preexisting `prime_ideal_of_disjoint_filter_ideal` theorem in Mathlib, which as far as I can tell is just a more general version of the Boolean Prime Ideal theorem.
AI was used in large scale scans to identify these missing entries, but I have done my best to check manually that the statements are correct.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
17/2 |
docs/1000.yaml |
1 |
9 |
['BoltonBailey', 'github-actions', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
36-60730 1 month ago |
36-61231 36 days ago |
63-73722 63 days |
| 41297 |
plp127 author:plp127 |
feat: cardinality of `Ultrafilter` |
We prove there are `2 ^ 2 ^ #α` ultrafilters on an infinite type `α`. For completeness, we also provide the cardinality lemma when `α` is finite.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
t-set-theory
|
142/0 |
Mathlib.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/Ultrafilter/Basic.lean,Mathlib/Order/Filter/Ultrafilter/Cardinality.lean |
4 |
1 |
['github-actions'] |
nobody |
35-85936 1 month ago |
36-20594 36 days ago |
36-20582 36 days |
| 41241 |
intgrah author:intgrah |
feat(Order/Category): cartesian closed and distributive structure on PartOrd and Preord |
Give `PartOrd` and `Preord` `CartesianMonoidalCategory`, `MonoidalClosed`, and `IsCartesianDistributive` instances.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
|
272/0 |
Mathlib.lean,Mathlib/Order/Category/PartOrd/CartesianClosed.lean,Mathlib/Order/Category/PartOrd/Distributive.lean,Mathlib/Order/Category/Preord/CartesianClosed.lean,Mathlib/Order/Category/Preord/Distributive.lean |
5 |
5 |
['github-actions', 'intgrah'] |
nobody |
35-84303 1 month ago |
37-22481 37 days ago |
37-22469 37 days |
| 38587 |
dagurtomas author:dagurtomas |
feat(Tactic/CategoryTheory): concrete category boilerplate |
Adds `mk_concrete_category`, a command for generating the initial boilerplate for concrete categories whose morphisms are given by a bundled function type.
The command creates the wrapper `Hom` type, named category and concrete category instances, `ofHom`, `Hom.hom`, and the basic dsimp lemmas.
It handles parameterized categories such as `ModuleCat`, and has a paired additive/multiplicative form for generating both structures at once (e.g. `MonCat`/`AddMonCat`).
Includes test categories checking the generated declarations.
[](https://gitpod.io/from-referrer/)
|
LLM-generated
t-meta
t-category-theory
|
905/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/CategoryTheory/MkConcreteCategory.lean,MathlibTest/CategoryTheory/MkConcreteCategory.lean |
4 |
8 |
['dagurtomas', 'eric-wieser', 'github-actions'] |
nobody |
35-66927 1 month ago |
92-56521 92 days ago |
92-57270 92 days |
| 34799 |
vlad902 author:vlad902 |
feat(SimpleGraph): the cycle graph and complete graph are Hamiltonian |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #34797
- [ ] depends on: #35255
- [ ] depends on: #37930
[](https://gitpod.io/from-referrer/) |
t-combinatorics
large-import
|
22/0 |
Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean |
1 |
6 |
['SnirBroshi', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vlad902'] |
nobody |
35-41484 1 month ago |
36-85713 36 days ago |
36-86252 36 days |
| 32282 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Angle/Incenter): unoriented angle bisection |
Add lemmas giving unoriented angles involving the incenter and excenters of a triangle as expressions involving dividing angles of the triangle by 2, deduced from oriented bisection lemmas.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #30981
- [ ] depends on: #30982
- [ ] depends on: #31205
- [ ] depends on: #32019
- [ ] depends on: #32021
- [ ] depends on: #32259
- [ ] depends on: #32260
- [ ] depends on: #32270
- [ ] depends on: #32273
- [ ] depends on: #32278
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
92/0 |
Mathlib/Geometry/Euclidean/Angle/Incenter.lean |
1 |
19 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'wwylele'] |
nobody |
35-32670 1 month ago |
35-32962 35 days ago |
133-126 133 days |
| 41317 |
Raph-DG author:Raph-DG |
chore(Function): ext lemma checking points in the support |
In this PR, we add in a variant of ext_iff_mulSupport which checks two functions are equal by checking they are equal at all points of the union of their supports. This was originally part of #38472, but having this lemma modify such a low level file was making it difficult to work on that PR
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
9/0 |
Mathlib/Algebra/Notation/Support.lean |
1 |
2 |
['github-actions'] |
nobody |
35-31953 1 month ago |
35-34669 35 days ago |
35-34657 35 days |
| 41327 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Subgraph): `induce` lemmas |
`Subgraph.induce` API for sup / inf / iSup / iInf / inter / iUnion / iInter (union already exists)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
58/0 |
Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
1 |
1 |
['github-actions'] |
nobody |
35-14178 1 month ago |
35-15542 35 days ago |
35-15530 35 days |
| 41305 |
martinwintermath author:martinwintermath |
feat(Geometry/Convex/ConvexSpace): consistency adjustments for convexity on module and affine space |
This PR makes a few consistency adjustments to improve the use of `ConvexSpace` with modules and affine spaces.
- make `IsModuleConvexSpace.ofModule` into an instance
- deprecate `isModuleConvexSpace_self` since now derived from `IsModuleConvexSpace.ofModule`
- rename `ConvexSpace.ofAddTorsor := AddTorsor.toConvexSpace`
- add class `IsAffineConvexSpace` and instance `IsAffineConvexSpace.ofAddTorsor`
- add instance deriving `IsAffineConvexSpace R V V` from `IsModuleConvexSpace R V`
With this PR, to use the standard convexity on an affine space we do no longer need the (usually too agressiv)
```lean4
attribute [local instance] AddTorsor.toConvexSpace
```
but the more general
```lean4
variable [ConvexSpace R P] [IsAffineConvexSpace R V P]
```
which now works analogously to convexity on modules. See the fixed instance `IsConvexDist` for metric spaces.
Zulip: [#PR reviews > Convexity refactor](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/Convexity.20refactor/with/607934406)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry |
49/16 |
Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Geometry/Convex/ConvexSpace/AffineSpace.lean,Mathlib/Geometry/Convex/ConvexSpace/Module.lean |
3 |
1 |
['github-actions'] |
nobody |
35-9497 1 month ago |
35-74708 35 days ago |
35-79100 35 days |
| 41336 |
SnirBroshi author:SnirBroshi |
chore(Combinatorics/SimpleGraph/Girth): golf `egirth_top` using `cycleGraph` |
Golf `egirth_top` (#38529) using `cycleGraph_isContained_iff` (#35255)
Co-authored-by: Vlad Tsyrklevich <vlad@tsyrklevi.ch>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
6/11 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
1 |
['github-actions'] |
nobody |
34-68505 1 month ago |
34-69025 34 days ago |
34-69013 34 days |
| 41337 |
gotrevor author:gotrevor |
doc(1000-yaml): add Goodstein's theorem and the Kirby–Paris theorem |
Claims two listed-but-unclaimed entries in the 1000+ theorems scoreboard by adding external-formalization pointers (no mathlib declaration; same pattern as Löb's theorem [`Q204884`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L201), the flypitch continuum-hypothesis independence [`Q208416`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L216), and Arrow's impossibility theorem [`Q33481`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L30)).
## Entries
| Wikidata | Theorem | Formalization |
|----------|---------|---------------|
| `Q1149185` | **Goodstein's theorem** — every Goodstein sequence terminates | [`lean-gallery`](https://github.com/gotrevor/lean-gallery/blob/main/LeanGallery/Logic/Goodstein/Statement.lean) (ordinal-descent proof) |
| `Q1149185X` | **Kirby–Paris theorem** — PA does not prove that every Goodstein sequence terminates | [`goodstein-independence`](https://github.com/gotrevor/goodstein-independence/blob/main/src/GoodsteinPA/Statement.lean) |
## Notes
- **`Q1149185X` (Kirby–Paris, 1982)** is built on the [`FormalizedFormalLogic/Foundation`](https://github.com/FormalizedFormalLogic/Foundation) library (the same library that backs the existing Löb's-theorem entry [`Q204884`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L201)), via the Wainer growth-rate route (`Goodstein` outgrows every PA-provably-total function). The headline `peano_not_proves_goodstein` is sorry-free and `#print axioms`-clean — it rests on exactly `[propext, Classical.choice, Quot.sound]`.
- **`Q1149185`** is Goodstein's theorem proper (the termination statement, provable in ZFC / Lean); mathlib does not currently contain it.
- Both formalizations are by Trevor Morris, developed with AI assistance: Claude Code (Fable 5, Opus), Codex, and Harmonic's Aristotle.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
new-contributor
LLM-generated
|
6/0 |
docs/1000.yaml |
1 |
4 |
['felixpernegger', 'github-actions'] |
nobody |
34-65192 1 month ago |
34-67447 34 days ago |
34-67435 34 days |
| 40953 |
ymonbru author:ymonbru |
feat: the definition of a KSheaf on a T2 Space |
This files adds the definition of a KSheaf on a T2 space with value in an arbitrary category.
One may expect this notion to come from sheaves on a site of compact subset of a topological space but there is no coresponding Grothendieck topology on compact subsets. In particular, this is because one of the axioms is in the form of a colimit and can't be expressed as a limit condition (hence a sheaf condition).
It also adds API that allow to use the axioms in a convenient way.
---
- [ ] depends on: #40737
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
133/0 |
Mathlib.lean,Mathlib/Topology/Sheaves/KSheaf.lean |
2 |
9 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'ymonbru'] |
nobody |
34-41691 1 month ago |
34-41691 34 days ago |
34-52414 34 days |
| 41358 |
erdkocak author:erdkocak |
doc(ModelTheory): fix partial equivalence theorem reference |
Fix a stale module doc reference in `ModelTheory.PartialEquiv`: the theorem is `equiv_between_cg`, and the conclusion is an isomorphism `M ≃[L] N`.
---
This documentation-only PR was split out from #41111 following review feedback.
Please note that ChatGPT Codex was used to help prepare this documentation-only PR. |
t-logic
new-contributor
|
3/3 |
Mathlib/ModelTheory/PartialEquiv.lean |
1 |
2 |
['github-actions'] |
nobody |
34-36760 1 month ago |
34-37349 34 days ago |
34-37337 34 days |
| 41111 |
erdkocak author:erdkocak |
feat(ModelTheory): add cardinal-generated substructure API |
This is the first PR in a sequence splitting #40561.
It adds a `CardinalLTGenerated` predicate for substructures, basic closure and map lemmas, and the finitely generated specialization.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Yusuf Demir <yusufdemir12610@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
Please note that we utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are direct translations from human-language source material (see the diff in `references.bib`) into Lean proofs using the mentioned AI tools. However, all design and formalization decisions were made by us. |
t-logic
new-contributor
LLM-generated
|
51/0 |
Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/Substructures.lean |
2 |
9 |
['NoahW314', 'erdkocak', 'felixpernegger', 'github-actions'] |
nobody |
34-35905 1 month ago |
34-36712 34 days ago |
40-34389 40 days |
| 41100 |
tb65536 author:tb65536 |
refactor(RingTheory/Localization/AtPrime/Basic): replace `IsLiesOverAlgebra` with `IsScalarTower` |
As @erdOne pointed out on #38465, the recently added `IsLiesOverAlgebra` is equivalent to assuming `IsScalarTower`. So I've deprecated `IsLiesOverAlgebra` and switched everything over to `IsScalarTower`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
71/57 |
Mathlib/RingTheory/Flat/Localization.lean,Mathlib/RingTheory/LocalRing/ResidueField/Fiber.lean,Mathlib/RingTheory/LocalRing/ResidueField/Ideal.lean,Mathlib/RingTheory/LocalRing/ResidueField/Instances.lean,Mathlib/RingTheory/LocalRing/ResidueField/Polynomial.lean,Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/QuasiFinite/Basic.lean,Mathlib/RingTheory/QuasiFinite/Weakly.lean,Mathlib/RingTheory/RamificationInertia/Inertia.lean,Mathlib/RingTheory/RamificationInertia/Ramification.lean,Mathlib/RingTheory/Unramified/LocalRing.lean,Mathlib/RingTheory/Unramified/LocalStructure.lean,Mathlib/RingTheory/Unramified/Locus.lean |
13 |
8 |
['chrisflav', 'github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
34-12274 1 month ago |
34-13197 34 days ago |
41-19708 41 days |
| 41364 |
SnirBroshi author:SnirBroshi |
chore(SimpleGraph/Clique): tidy `CliqueFree` iff lemmas |
Add `G.CliqueFree n ↔ (completeGraph (Fin n)).Free G` and rename two other iff theorems to fit better.
Since `Free` is not infix it should come before `top` when naming, `cliqueFree_iff` should mention its RHS since it isn't obvious, and `Fintype.card` should be mentioned.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
18/8 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Extremal/Turan.lean |
2 |
1 |
['github-actions'] |
nobody |
33-73670 1 month ago |
34-11861 34 days ago |
34-11849 34 days |
| 41373 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph): some `CliqueFree`/`Free` lemmas |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
29/0 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Copy.lean |
2 |
1 |
['github-actions'] |
nobody |
33-73433 1 month ago |
33-74011 33 days ago |
33-73999 33 days |
| 41369 |
tb65536 author:tb65536 |
feat(RingTheory/Localization/Ideal): generalize `IsLocalization.isMaximal_of_isMaximal_disjoint` |
This PR generalizes the existing `IsLocalization.isMaximal_of_isMaximal_disjoint` in `RingTheory/Jacobson/Ring` to arbitrary localizations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
21/18 |
Mathlib/RingTheory/Jacobson/Ring.lean,Mathlib/RingTheory/KrullDimension/Polynomial.lean,Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/Localization/Ideal.lean |
4 |
1 |
['github-actions'] |
nobody |
33-71180 1 month ago |
33-71227 33 days ago |
33-71216 33 days |
| 39864 |
8e7 author:8e7 |
feat(Combinatorics/SimpleGraph/Acyclic): helly property on subtrees |
This PR adds several lemmas regarding connected subsets of vertices in trees (subtrees). The main result is the Helly property for subtrees: For a finite set of subtrees, if any pair of subtrees intersect, then there is a common vertex in all subtrees.
This lemma is part of an effort to formalize tree decompositions (see #38334), and will be used in a future PR to prove `G.cliqueNum - 1 <= G.treeWidth`.
AI Usage: The proofs were developed with the help of Claude Code. I vouch for all the code written and understand the content fully.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
|
114/0 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean |
2 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
33-56926 1 month ago |
33-57481 33 days ago |
51-71642 51 days |
| 37683 |
SabrinaJewson author:SabrinaJewson |
feat(Order/OrdContinuous): every map between complete lattices that preserves sSup is a left adjoint of some Galois connection |
It is already proven that the left side of a Galois connection is left-continuous; this provides the converse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #37682
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
|
14/0 |
Mathlib/Order/OrdContinuous.lean |
1 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
31-81938 1 month ago |
31-83605 31 days ago |
31-85040 31 days |
| 41393 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Hamiltonian): a graph is Hamiltonian iff there's a Hamiltonian path with adjacent endpoints |
---
The new public import is needed because `Nat.card` was previously only imported privately.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
38/1 |
Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean |
1 |
1 |
['github-actions'] |
nobody |
31-42881 1 month ago |
32-70374 32 days ago |
32-70362 32 days |
| 41208 |
tb65536 author:tb65536 |
chore(FieldTheory/Galois/IsGaloisGroup): remove FaithfulSMul assumptions |
A few results in IsGaloisGroup.lean are proved by passing to fraction fields which requires assuming FaithfulSMul. This PR removes the FaithfulSMul assumption by first passing to the image subring.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
28/29 |
Mathlib/FieldTheory/Galois/IsGaloisGroup.lean,Mathlib/NumberTheory/RamificationInertia/Galois.lean,Mathlib/RingTheory/IsGaloisGroup/Basic.lean |
3 |
1 |
['Whysoserioushah', 'github-actions'] |
nobody |
31-33007 1 month ago |
37-83177 37 days ago |
37-83166 37 days |
| 41401 |
vlad902 author:vlad902 |
feat(RingTheory): `Ideal.span` corollaries of Krull's height theorem |
Currently we have statements bounding the height of minimal primes of `Ideal.span s`. Add the obvious corollaries to bound the height of `Ideal.span s` directly.
Also add a `Set.encard`-valued statement of Krulls' height theorem for `Ideal.span`s. In a Noetherian ring we know the bound should always be finite, but this is useful in downstream applications that are using ENats.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
26/1 |
Mathlib/RingTheory/Ideal/KrullsHeightTheorem.lean |
1 |
1 |
['github-actions'] |
nobody |
31-32504 1 month ago |
32-38457 32 days ago |
32-38906 32 days |
| 40303 |
MichaelStollBayreuth author:MichaelStollBayreuth |
feat(AlgebraicGeometry/EllipticCurve/Affine): more on `xRep` |
This PR adds explicit formulas for `xRep` of a sum of two (affine) points on a Weierstrass curve.
This will be needed on the way to the Mordell-Weil Theorem for elliptic curves.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry |
116/0 |
Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Formula.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Point.lean |
2 |
17 |
['MichaelStollBayreuth', 'Multramate', 'github-actions'] |
Multramate and mattrobball assignee:Multramate assignee:mattrobball |
31-25889 1 month ago |
41-54 41 days ago |
61-85088 61 days |
| 41469 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Coloring/EdgeLabeling): `Unique` & `IsEmpty` instances and simplify `mk` |
---
The changes aren't related, they're just small so I grouped them together.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
8/5 |
Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeLabeling.lean |
1 |
1 |
['github-actions'] |
nobody |
30-82643 30 days ago |
30-84533 30 days ago |
30-84521 30 days |
| 41459 |
EzequielS2 author:EzequielS2 |
feat(Algebra/Group): mulOpposite equivs for submonoid and subgroup |
## Summary
Add MulOpposite monoid equivalences for submonoids and subgroups, and remove the corresponding TODOs in `Subsemiring/MulOpposite.lean`.
## Test plan
- [x] `lake build` and `lake exe runLinter` on `Mathlib.Algebra.Group.Submonoid.MulOpposite` and `Mathlib.Algebra.Group.Subgroup.MulOpposite`
|
t-algebra
new-contributor
label:t-algebra$ |
78/4 |
Mathlib/Algebra/Group/Subgroup/MulOpposite.lean,Mathlib/Algebra/Group/Submonoid/MulOpposite.lean,Mathlib/Algebra/Ring/Subsemiring/MulOpposite.lean |
3 |
9 |
['EzequielS2', 'github-actions', 'wwylele'] |
nobody |
30-67222 30 days ago |
31-4992 31 days ago |
31-4980 31 days |
| 41466 |
EzequielS2 author:EzequielS2 |
feat(Algebra/Order): stronger sublist product inequality via diff |
## Summary
Add `Sublist.prod_le_prod'_of_mem_diff` and `Sublist.sum_le_sum_of_mem_diff`.
## Test plan
- [x] `lake build` and `lake exe runLinter` on `Mathlib.Algebra.Order.BigOperators.Group.List`
|
t-algebra
new-contributor
label:t-algebra$ |
13/4 |
Mathlib/Algebra/Order/BigOperators/Group/List.lean |
1 |
6 |
['EzequielS2', 'github-actions', 'wwylele'] |
nobody |
30-66035 30 days ago |
30-85764 30 days ago |
30-85752 30 days |
| 41218 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Star): the star graph is the only triangle-free graph with a universal vertex |
- `starGraph r |>.CliqueFree 3`
- `G.IsUniversal v → G.CliqueFree 3 → G = starGraph v`
- `G.IsUniversal v → (G.IsAcyclic ↔ G.CliqueFree 3)`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
29/4 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Star.lean |
2 |
3 |
['github-actions', 'vlad902'] |
nobody |
30-54548 30 days ago |
37-13580 37 days ago |
37-69273 37 days |
| 41310 |
SnirBroshi author:SnirBroshi |
feat(Algebra/Group/Subgroup/ZPowers/Lemmas): generalize from pairs to `Finset`s |
Generalize `closure_eq_zmultiples`/`zmultiples_sup`/`zmultiples_inf` from pairs to `Finset`s. For `s : Finset ℤ`:
- `closure (s : Set ℤ) = zmultiples (s.gcd id)`
- `s.sup zmultiples = zmultiples (s.gcd id)`
- `s.inf zmultiples = zmultiples (s.lcm id)`
---
If the large imports aren't okay we could have a new `ZPowers/Finset.lean` or `ZPowers/FinsetLemmas.lean`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41261
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
28/3 |
Mathlib/Algebra/Group/Subgroup/ZPowers/Lemmas.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
30-51049 30 days ago |
30-52363 30 days ago |
30-54472 30 days |
| 41467 |
vlad902 author:vlad902 |
chore(MulLECancellable): rename lemmas |
Right now MulLECancellable has dual `Injective/inj` and `injective_left/inj_left` lemmas. Rename the first pair to `injective_right/inj_right` to match and add a `IsRightRegular` lemma to match the `IsLeftRegular` one.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
25/9 |
Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Order/Sub/Unbundled/Basic.lean,Mathlib/Data/ENNReal/Operations.lean |
3 |
1 |
['github-actions'] |
nobody |
30-40695 30 days ago |
30-43654 30 days ago |
30-46428 30 days |
| 39993 |
Brian-Nugent author:Brian-Nugent |
feat(Topology/CategoryTheory): TopologicalSpace.Opens.map preserves colimits and finite limits |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39992
- [ ] depends on: #39991
[](https://gitpod.io/from-referrer/)
|
t-topology
t-category-theory
large-import
|
50/17 |
Mathlib/Geometry/RingedSpace/OpenImmersion.lean,Mathlib/Geometry/RingedSpace/PresheafedSpace/Gluing.lean,Mathlib/Topology/Category/TopCat/Opens.lean,Mathlib/Topology/Sheaves/Presheaf.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
30-37961 30 days ago |
30-37964 30 days ago |
30-37952 30 days |
| 41443 |
alreadydone author:alreadydone |
feat(RingTheory/AdjoinRoot): add AdjoinRoot.isFractionRing |
Co-authored-by: Sriram Chinthalagiri Venkata @sriram3301
Co-authored-by: David Kurniadi Angdinata @Multramate
This contribution was created as part of the Heidelberg Lean workshop "Formalising algebraic geometry" in November 2025.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-ring-theory
label:t-algebra$ |
88/7 |
Mathlib/RingTheory/AdjoinRoot.lean,Mathlib/RingTheory/Algebraic/Integral.lean,Mathlib/RingTheory/Localization/Algebra.lean |
3 |
3 |
['alreadydone', 'github-actions', 'leanprover-radar'] |
nobody |
30-25976 30 days ago |
30-79613 30 days ago |
31-21982 31 days |
| 41306 |
vlad902 author:vlad902 |
feat(SimpleGraph): reduce CycleGraph imports |
Reduce the imports for CycleGraph.lean and re-prove and move a few lemmas around as a result.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
44/23 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/CycleGraph.lean,Mathlib/Combinatorics/SimpleGraph/Hasse.lean |
3 |
13 |
['SnirBroshi', 'github-actions', 'vlad902'] |
nobody |
30-23144 30 days ago |
35-41489 35 days ago |
35-41519 35 days |
| 36813 |
AlexeyMilovanov author:AlexeyMilovanov |
feat(Computability.Encoding): add self-delimiting unary and pair encodings |
Adds self-delimiting boolean encodings to `Mathlib.Computability.Encoding`.
**Key changes:**
* **`unaryPrefixEncodingNat`**: A self-delimiting unary `Encoding ℕ Bool`, using the code $1^n0$.
* **`encodingProdBool`**: Builds an `Encoding (α × β) Bool` from boolean encodings of `α` and `β`, by prefixing the length of the first encoded component.
* **`encodingListBool`**: Builds an `Encoding (List α) Bool` from a boolean encoding of `α`, using self-delimiting element encodings.
* **`UnaryPrefix` helpers**: Internal-style helper API for the underlying length-prefixed boolean-list encoding and decoding. |
t-computability
new-contributor
|
98/0 |
Mathlib/Computability/Encoding.lean |
1 |
6 |
['AlexeyMilovanov', 'Komyyy', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
30-13396 30 days ago |
30-13396 30 days ago |
46-55661 46 days |
| 38975 |
ldct author:ldct |
feat(EReal): Add equations for EReal |
Add equational lemmas for the simplifier to simplify `[natural number literal] + ⊤` in `EReal`, and add a test file in `MathlibTest/EReal.lean`.
Without these lemmas, `simp` fails to close many of the goals in `MathlibTest/EReal.lean`. I believe simp should close all of them.
An alternative is to add something like this as a simp lemma, to allow `top_add_of_ne_bot` to make progress, but it's not clear to me that this is desirable as a simp lemma, since it's not equational
```
example {n : ℕ} [n.AtLeastTwo] : (ofNat(n) : EReal) ≠ ⊤ := by
exact Ne.symm (not_eq_of_beq_eq_false rfl)
```
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
32/0 |
Mathlib/Data/EReal/Operations.lean,MathlibTest/EReal.lean |
2 |
2 |
['github-actions', 'vihdzp'] |
nobody |
29-66975 29 days ago |
93-74160 93 days ago |
93-74148 93 days |
| 41399 |
vlad902 author:vlad902 |
feat(MvPolynomial): ideal generated by variables is prime over a domain |
---
AI: Used Claude to help search for lemmas and golf, no AI code made it into the final PR.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
38/5 |
Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/RingTheory/MvPolynomial/Ideal.lean |
2 |
1 |
['github-actions'] |
nobody |
29-38579 29 days ago |
32-38473 32 days ago |
32-39872 32 days |
| 40952 |
tb65536 author:tb65536 |
feat(Algebra/Group/Subgroup/Basic): monotonicity of inertia subgroups |
This PR proves that inertia subgroups are monotone.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
5/1 |
Mathlib/Algebra/Group/Subgroup/Basic.lean |
1 |
1 |
['Multramate', 'github-actions'] |
nobody |
29-37160 29 days ago |
45-17333 45 days ago |
45-17322 45 days |
| 36815 |
EtienneC30 author:EtienneC30 |
feat: a measurable space structure on the type of continuous maps |
Endow the type `C(X, Y)` of continuous maps from `X` to `Y` with the Borel sigma-algebra coming from the compact-open topology and show that, under some assumptions on `X` and `Y`, this is equal to the restriction of the product sigma-algebra over `X → Y`.
Provide a measurable equivalence between `{f : X → Y // Continuous f}` and `C(X, Y)`.
Co-authored-by: @RemyDegenne
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
brownian
t-measure-probability
|
256/0 |
Mathlib.lean,Mathlib/MeasureTheory/Constructions/BorelSpace/ContinuousMap.lean,Mathlib/Topology/Bases.lean,Mathlib/Topology/Basic.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Separation/Regular.lean |
6 |
27 |
['ADedecker', 'EtienneC30', 'felixpernegger', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
29-34603 29 days ago |
94-39817 94 days ago |
134-35155 134 days |
| 41521 |
BryceT233 author:BryceT233 |
chore(Algebra/Order/Antidiag): relax an assumption in the definition of `HasAntidiagonal` |
This PR relaxes the typeclass requirement for `HasAntidiagonal` from `AddMonoid A` to `Add A`, which is useful for defining multiplications in `TotalMonoidAlgebra`(#41472).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
16/17 |
Mathlib/Algebra/Order/Antidiag/Prod.lean,Mathlib/Algebra/Order/Antidiag/Tendsto.lean |
2 |
4 |
['BryceT233', 'eric-wieser', 'github-actions'] |
nobody |
29-32410 29 days ago |
29-34664 29 days ago |
29-58387 29 days |
| 41433 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): more path/circuit/cycle lemmas |
- two `(p.append q).IsPath` lemmas (splitting to either `p` & `q.tail` or `p.dropLast` & `q`)
- `p.reverse.IsCircuit`
- `p.dropLast.IsPath ↔ p.tail.IsPath`
- `p.IsCycle ↔ p.dropLast.IsPath ∧ 3 ≤ p.length`
---
Golfs a few small things using the new lemmas as a drive by.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
35/9 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean |
1 |
1 |
['github-actions'] |
nobody |
29-31778 29 days ago |
29-32353 29 days ago |
31-64227 31 days |
| 41504 |
Paul-Lez author:Paul-Lez |
feat: add formula for the `j`-invariant of an elliptic curve |
This doesn't seem to be in Mathlib yet (?).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry |
4/0 |
Mathlib/AlgebraicGeometry/EllipticCurve/Weierstrass.lean |
1 |
4 |
['Multramate', 'Paul-Lez', 'github-actions'] |
Multramate assignee:Multramate |
29-26763 29 days ago |
30-13434 30 days ago |
30-13422 30 days |
| 41541 |
felixpernegger author:felixpernegger |
chore: prefer `classical` over `open scoped Classical` in proofs |
In #41423 it came up that it is preferable to use `classical` in proofs instead of `open (scoped) Classical`, as its slightly easier to maintain. This PR replaces all such occurences where it can be reasonably done.
This is likely my last PR about this topic.
(I used Claude to fix some git issue, which is why it shows up in the commit)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
111/58 |
Mathlib/Logic/Basic.lean,Mathlib/Logic/Function/Basic.lean,Mathlib/Order/Basic.lean,Mathlib/Order/Defs/PartialOrder.lean |
4 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
29-10393 29 days ago |
29-13468 29 days ago |
29-13456 29 days |
| 41135 |
martinwintermath author:martinwintermath |
feat(Algebra/Order/Nonneg): generalize Nonneg/Field.lean to `DivisionSemiring` |
Generalizes the content of Nonneg/Field.lean from `Semifield` to `DivisionSemiring`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
15/5 |
Mathlib/Algebra/Order/Nonneg/Field.lean |
1 |
5 |
['github-actions', 'leanprover-radar', 'themathqueen'] |
nobody |
29-9078 29 days ago |
39-74196 39 days ago |
39-74184 39 days |
| 41537 |
Mathias-Stout author:Mathias-Stout |
feat(RingTheory/TwoSidedIdeal/Lattice): add lemmas on two-sided ideals |
We add three lemmas on two-sided ideals.
These are analogues of existing lemmas of `Submodule` with the same names.
This prepares a follow-up PR proving that quaternions are central simple.
Co-authored-by: Justus Springer [justusspringer@gmx.de](mailto:justusspringer@gmx.de)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
|
13/0 |
Mathlib/RingTheory/TwoSidedIdeal/Lattice.lean |
1 |
5 |
['Whysoserioushah', 'github-actions', 'kbuzzard'] |
nobody |
29-7727 29 days ago |
29-10170 29 days ago |
29-17935 29 days |
| 41438 |
SnirBroshi author:SnirBroshi |
doc(Matrix): mention bundled forms in docstrings |
Followup to https://github.com/leanprover-community/mathlib4/pull/39123#issuecomment-4798925362
---
As in `Matrix.map`s docstring, the convention is "This is available in bundled forms as" and then listing bundled versions in asterisk bullet-points.
If there's only one item I went with "This is available in a bundled form as X".
For `Matrix.entry{AddHom/AddMonoidHom/LinearMap}` none of them is the "main" definition, so I added "see also" for each of them listing the other two.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
88/15 |
Mathlib/Data/Matrix/Basic.lean,Mathlib/Data/Matrix/Composition.lean,Mathlib/Data/Matrix/Diagonal.lean,Mathlib/Data/Matrix/Mul.lean,Mathlib/LinearAlgebra/Matrix/ConjTranspose.lean,Mathlib/LinearAlgebra/Matrix/Defs.lean,Mathlib/LinearAlgebra/Matrix/Determinant/Basic.lean,Mathlib/LinearAlgebra/Matrix/Permutation.lean |
8 |
6 |
['eric-wieser', 'github-actions', 'mathlib-splicebot', 'themathqueen'] |
nobody |
29-5587 29 days ago |
31-45901 31 days ago |
31-45889 31 days |
| 41548 |
JovanGerb author:JovanGerb |
chore: use `to_dual` for `DedekindCut` |
This PR uses `to_dual` in DedekindCut.
To make this work, we add a shortcut `PartialOrder` instance. We also add some specialized `DedekindCut` theorems, from the more general `Concept` theorems.
Two `gcongr` tags are also added on appropriate lemmas.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
35/18 |
Mathlib/Order/Completion.lean |
1 |
1 |
['github-actions'] |
nobody |
29-4523 29 days ago |
29-5256 29 days ago |
29-5244 29 days |
| 41554 |
felixpernegger author:felixpernegger |
chore: remove `noncomputable section` when only theorems in file |
Removes `noncomputable section` whenever no def/abbrev/instances appear in the section.
This is not the most important change, but prepares for a more general cleanup around `noncomputable`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
10/243 |
Mathlib/Algebra/GroupWithZero/Range.lean,Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/Polynomial/Degree/Domain.lean,Mathlib/Algebra/Polynomial/Degree/Lemmas.lean,Mathlib/Algebra/Polynomial/Degree/Monomial.lean,Mathlib/Algebra/Polynomial/Degree/Support.lean,Mathlib/Algebra/Polynomial/Degree/Units.lean,Mathlib/Algebra/Polynomial/Eval/Algebra.lean,Mathlib/Algebra/Polynomial/Eval/Irreducible.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Analysis/Analytic/Within.lean,Mathlib/Analysis/BoxIntegral/DivergenceTheorem.lean,Mathlib/Analysis/Calculus/ContDiff/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Analysis/Calculus/ContDiff/Comp.lean,Mathlib/Analysis/Calculus/ContDiff/Deriv.lean,Mathlib/Analysis/Calculus/ContDiff/FiniteDimension.lean,Mathlib/Analysis/Calculus/ContDiff/RCLike.lean,Mathlib/Analysis/Calculus/Deriv/Mul.lean,Mathlib/Analysis/Calculus/FDeriv/Add.lean,Mathlib/Analysis/Calculus/FDeriv/Basic.lean,Mathlib/Analysis/Calculus/FDeriv/Bilinear.lean,Mathlib/Analysis/Calculus/FDeriv/Comp.lean,Mathlib/Analysis/Calculus/FDeriv/Congr.lean,Mathlib/Analysis/Calculus/FDeriv/Const.lean,Mathlib/Analysis/Calculus/FDeriv/Equiv.lean,Mathlib/Analysis/Calculus/FDeriv/Prod.lean,Mathlib/Analysis/Calculus/FDeriv/RestrictScalars.lean,Mathlib/Analysis/Calculus/ParametricIntegral.lean,Mathlib/Analysis/Complex/CauchyIntegral.lean,Mathlib/Analysis/Complex/ReImTopology.lean,Mathlib/Analysis/Fourier/PoissonSummation.lean,Mathlib/Analysis/Fourier/RiemannLebesgueLemma.lean,Mathlib/Analysis/InnerProductSpace/Continuous.lean,Mathlib/Analysis/MeanInequalities.lean,Mathlib/Analysis/Normed/Module/Dual.lean,Mathlib/Analysis/SpecialFunctions/ExpDeriv.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/GaussianIntegral.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/PoissonSummation.lean,Mathlib/Analysis/SpecialFunctions/JapaneseBracket.lean,Mathlib/Analysis/SpecialFunctions/Log/Monotone.lean,Mathlib/Analysis/SpecialFunctions/Pow/Asymptotics.lean,Mathlib/Analysis/SpecialFunctions/Pow/Continuity.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/ArctanDeriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Complex.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/ComplexDeriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/InverseDeriv.lean,Mathlib/CategoryTheory/Limits/EssentiallySmall.lean,Mathlib/CategoryTheory/Limits/Preserves/Opposites.lean,Mathlib/CategoryTheory/Sites/CoverPreserving.lean,Mathlib/Data/Finsupp/PointwiseSMul.lean,Mathlib/Data/W/Cardinal.lean,Mathlib/Dynamics/Ergodic/Conservative.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/MvRatFunc/Rank.lean,Mathlib/FieldTheory/PurelyInseparable/Tower.lean,Mathlib/Geometry/Euclidean/Angle/Oriented/RightAngle.lean,Mathlib/Geometry/Euclidean/Angle/Sphere.lean,Mathlib/Geometry/Euclidean/Angle/Unoriented/RightAngle.lean,Mathlib/Geometry/Euclidean/Basic.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/Geometry/Manifold/MFDeriv/Basic.lean,Mathlib/Geometry/Manifold/MFDeriv/FDeriv.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/Geometry/Manifold/MFDeriv/UniqueDifferential.lean,Mathlib/Geometry/Manifold/SmoothApprox.lean,Mathlib/Geometry/Manifold/SmoothEmbedding.lean,Mathlib/LinearAlgebra/Charpoly/ToMatrix.lean,Mathlib/LinearAlgebra/Dimension/ErdosKaplansky.lean,Mathlib/LinearAlgebra/Finsupp/Span.lean,Mathlib/LinearAlgebra/LinearIndependent/Basic.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/FiniteField.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/Minpoly.lean,Mathlib/LinearAlgebra/Matrix/Diagonal.lean,Mathlib/LinearAlgebra/PerfectPairing/Restrict.lean,Mathlib/LinearAlgebra/RootSystem/Finite/Lemmas.lean,Mathlib/LinearAlgebra/RootSystem/GeckConstruction/Relations.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/Indicator.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/Real.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Indicator.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Monotonicity.lean,Mathlib/MeasureTheory/Function/LpSeminorm/SMul.lean,Mathlib/MeasureTheory/Function/SpecialFunctions/RCLike.lean,Mathlib/MeasureTheory/Integral/ExpDecay.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/ContDiff.lean,Mathlib/MeasureTheory/Integral/Layercake.lean,Mathlib/MeasureTheory/Integral/Prod.lean,Mathlib/MeasureTheory/MeasurableSpace/Pi.lean,Mathlib/MeasureTheory/MeasurableSpace/Prod.lean,Mathlib/MeasureTheory/Measure/Decomposition/RadonNikodym.lean,Mathlib/MeasureTheory/Measure/Portmanteau.lean,Mathlib/MeasureTheory/OuterMeasure/Basic.lean,Mathlib/NumberTheory/AbelSummation.lean,Mathlib/NumberTheory/LSeries/SumCoeff.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Summable.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/IsBoundedAtImInfty.lean |
124 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
28-70090 28 days ago |
28-72410 28 days ago |
28-72398 28 days |
| 36202 |
vihdzp author:vihdzp |
feat: more theorems on the Cantor normal form |
We also remove some redundant assumptions.
Used in the CGT repo.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory |
68/17 |
Mathlib/SetTheory/Ordinal/CantorNormalForm.lean |
1 |
21 |
['SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
28-66971 28 days ago |
135-36743 135 days ago |
154-28692 154 days |
| 41429 |
felixpernegger author:felixpernegger |
chore(Combinatorics): remove a `set_option backward.privateInPublic` |
Together with #41410 this removes all but one global `set_option backward.privateInPublic true`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
8/7 |
Mathlib/Combinatorics/Matroid/Basic.lean,Mathlib/Combinatorics/Matroid/Dual.lean,Mathlib/Combinatorics/Matroid/Loop.lean,Mathlib/Combinatorics/Matroid/Minor/Restrict.lean |
4 |
13 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts', 'vlad902'] |
nobody |
28-24826 28 days ago |
28-25694 28 days ago |
30-25791 30 days |
| 41598 |
NoahW314 author:NoahW314 |
feat(Algebra/Order/BigOperators): add `Finset.prod_le_prod_of_injOn` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
17/0 |
Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/Algebra/Order/BigOperators/GroupWithZero/Finset.lean |
2 |
1 |
['github-actions'] |
nobody |
28-429 28 days ago |
28-2796 28 days ago |
28-3195 28 days |
| 41604 |
tb65536 author:tb65536 |
feat(NumberTheory/NumberField/Completion/FinitePlace): compatibility of finite places across an algebra map |
Given an extension of finite places, this PR proves compatibility across an algebra map. Eventually it would be nice to have a version stated purely in terms of `FinitePlace`, but we are lacking the ramification theory of finite places required for this (I have larger plans to do ramification theory for absolute values more generally, but this will take some time).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
t-algebra
label:t-algebra$ |
23/4 |
Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean |
1 |
1 |
['github-actions'] |
nobody |
27-77305 27 days ago |
27-77359 27 days ago |
27-77348 27 days |
| 41607 |
mbkybky author:mbkybky |
chore(RingTheory/DedekindDomain): update definitions |
Update [IsDedekindRing](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/DedekindDomain/Basic.html#IsDedekindRing) and [IsDedekindDomainDvr](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/DedekindDomain/Dvr.html#IsDedekindDomainDvr) to extend `IsNoetherianRing A` instead of `IsNoetherian A A`, bringing their definitions closer to the usual mathematical formulations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
2/2 |
Mathlib/RingTheory/DedekindDomain/Basic.lean,Mathlib/RingTheory/DedekindDomain/Dvr.lean |
2 |
1 |
['github-actions'] |
nobody |
27-61835 27 days ago |
27-62707 27 days ago |
27-62695 27 days |
| 41609 |
SnirBroshi author:SnirBroshi |
feat(Data/List/Dedup): `dedup` and `Nodup` lemmas |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
16/0 |
Mathlib/Data/Finset/Card.lean,Mathlib/Data/Finset/Dedup.lean,Mathlib/Data/List/Dedup.lean |
3 |
1 |
['github-actions'] |
nobody |
27-54161 27 days ago |
27-56976 27 days ago |
27-56964 27 days |
| 41476 |
SnirBroshi author:SnirBroshi |
feat(SetTheory/Cardinal/NatCard): length of a nodup list whose elements come from a set |
For a list `l` with `l.Nodup` and a set `s` with `∀ a ∈ l, a ∈ s` we have `l.length ≤ s.encard`,
and similar statements for `Finset`/`Multiset` with `Set.encard`/`Set.ncard`/`ENat.card`/`Nat.card`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory |
82/12 |
Mathlib/Data/Finset/Dedup.lean,Mathlib/SetTheory/Cardinal/NatCard.lean |
2 |
1 |
['github-actions'] |
nobody |
27-54003 27 days ago |
30-62436 30 days ago |
30-62424 30 days |
| 41629 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Subgraph): `neighborSet` of `coe`/`spanningCoe` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/3 |
Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
1 |
1 |
['github-actions'] |
nobody |
26-59909 26 days ago |
26-60478 26 days ago |
26-60466 26 days |
| 41633 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): length of closed a walk/trail isn't `1`/`2` |
For a closed walk `p`:
- `p.length ≠ 1`
- `p.IsTrail` → `p.length ≠ 2`
- `p.IsTrail` → `p.length ≤ 2` → `p.Nil`
---
Since a circuit is a closed non-nil trail, `IsTrail.nil_of_length_le_two` is basically the contrapositive of `IsCircuit.three_le_length`, but I think this form is useful.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
11/4 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
26-49681 26 days ago |
26-50333 26 days ago |
26-50321 26 days |
| 41613 |
WenrongZou author:WenrongZou |
feat(ModularForm): add eisensteinSeries G_k^v |
This PR add the Eisenstein series $G_k^{\bar{v}}$, and prove it as a sum of Eisenstein series $E_k^{\bar{v}}$.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import |
179/0 |
Mathlib/Data/ZMod/Basic.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/Basic.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/Defs.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/IsBoundedAtImInfty.lean |
4 |
2 |
['github-actions', 'mathlib-bors'] |
nobody |
26-40129 26 days ago |
26-40129 26 days ago |
26-43338 26 days |
| 41426 |
gmcninch-prof author:gmcninch-prof |
Add SymmetricMap: symmetric multilinear maps |
Define `SymmetricMap R M N ι`, the type of symmetric `R`-multilinear maps
from `ι → M` to `N` (i.e. multilinear maps invariant under permutation of
their arguments).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
The code is adapted from Kenny Lau's work
[here](https://github.com/kckennylau/EllipticCurve/blob/master/EllipticCurve/ProjectiveSpace/TensorProduct/SymmetricMap.lean)
-- see [`SymmetricMap`](https://github.com/gmcninch-prof/mathlib4/blob/symmetric-power-lift/Mathlib/LinearAlgebra/TensorProduct/SymmetricMap.lean).
This PR previously also contained the universal property / `lift` for
`SymmetricPower` (relating linear maps out of `Sym[R]^n M` to symmetric
multilinear maps), but per reviewer feedback on Zulip that work has been
split into a separate PR that depends on this one.
Zulip discussion [here](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/SymmetricPower.20universal.20property/near/608532652)
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
397/0 |
Mathlib.lean,Mathlib/LinearAlgebra/TensorProduct/SymmetricMap.lean |
2 |
10 |
['github-actions', 'gmcninch-prof', 'jcommelin'] |
nobody |
25-85722 25 days ago |
25-85722 25 days ago |
27-54012 27 days |
| 41659 |
NoahW314 author:NoahW314 |
feat(Algebra/Order/GroupWithZero): generalize from `MonoidWithZero` to `MulZeroClass` |
The same proofs hold with the weaker typeclass.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
37/49 |
Mathlib/Algebra/Order/GroupWithZero/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
25-78452 25 days ago |
25-80979 25 days ago |
25-80967 25 days |
| 41308 |
sergantche author:sergantche |
feat: add `List.insertIdx_eraseIdx_getElem_perm` |
Adds `List.insertIdx_eraseIdx_getElem_perm`, showing that erasing an element by index and inserting it at any valid position gives a permutation of the original list.
This packages the existing lemmas `List.perm_insertIdx` and `List.getElem_cons_eraseIdx_perm` into a direct API lemma.
AI assistance was used in preparing this PR; I reviewed the statement and proof.
[](https://gitpod.io/from-referrer/) |
t-data
new-contributor
|
5/0 |
Mathlib/Data/List/Perm/Basic.lean |
1 |
4 |
['github-actions', 'sergantche', 'vlad902'] |
nobody |
25-74906 25 days ago |
25-77749 25 days ago |
29-81132 29 days |
| 40692 |
pechersky author:pechersky |
feat(GroupTheory/Finite): torsion free and FG WithOne M is when M is |
Couldn't find a better place for these
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [ ] depends on #40690 |
t-group-theory |
62/3 |
Mathlib/Algebra/Group/Hom/Defs.lean,Mathlib/Algebra/Group/Nat/Hom.lean,Mathlib/Algebra/Group/WithOne/Basic.lean,Mathlib/GroupTheory/MonoidLocalization/Finite.lean |
4 |
2 |
['github-actions'] |
nobody |
25-115 25 days ago |
25-3598 25 days ago |
25-8272 25 days |
| 41597 |
NoahW314 author:NoahW314 |
feat(Data/Finset/Card): add `Finset.card_le_card_of_surjective` |
This is modeled on the corresponding lemma `Finset.card_le_card_of_injective`, which already exists.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
9/0 |
Mathlib/Data/Finset/Card.lean |
1 |
2 |
['github-actions', 'themathqueen'] |
nobody |
24-81040 24 days ago |
28-5056 28 days ago |
28-5044 28 days |
| 41710 |
WenrongZou author:WenrongZou |
feat(FormalGroup): generalize the definition of `FormalGroup.Point` |
This PR generalizes the definition of the point of formal group. This will fit into more cases of applications.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
120/75 |
Mathlib/RingTheory/FormalGroup/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
24-78255 24 days ago |
24-79340 24 days ago |
24-79328 24 days |
| 41637 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Algebra/Group core and subobjects |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 13 file(s) in **Algebra/Group core and subobjects**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-algebra
label:t-algebra$ |
70/24 |
Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Center.lean,Mathlib/Algebra/Group/Commute/Defs.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Group/Subgroup/Basic.lean,Mathlib/Algebra/Group/Subgroup/Ker.lean,Mathlib/Algebra/Group/Subgroup/MulOppositeLemmas.lean,Mathlib/Algebra/Group/Submonoid/Membership.lean,Mathlib/Algebra/Group/Submonoid/MulAction.lean,Mathlib/Algebra/Group/Subsemigroup/Membership.lean,Mathlib/Algebra/Group/Torsion.lean,Mathlib/Algebra/Group/UniqueProds/Basic.lean |
13 |
11 |
['adomani', 'artie2000', 'github-actions'] |
nobody |
24-77783 24 days ago |
26-29859 26 days ago |
26-29847 26 days |
| 41636 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Algebra/Group actions and homs |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 7 file(s) in **Algebra/Group actions and homs**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-algebra
label:t-algebra$ |
60/21 |
Mathlib/Algebra/Group/Action/Defs.lean,Mathlib/Algebra/Group/Action/Faithful.lean,Mathlib/Algebra/Group/Action/Hom.lean,Mathlib/Algebra/Group/Action/Units.lean,Mathlib/Algebra/Group/Equiv/Defs.lean,Mathlib/Algebra/Group/Hom/Defs.lean,Mathlib/Algebra/Group/Units/Hom.lean |
7 |
14 |
['JovanGerb', 'adomani', 'artie2000', 'github-actions'] |
nobody |
24-77472 24 days ago |
25-30317 25 days ago |
26-30171 26 days |
| 41713 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Finite): the `Fintype` instance for `incidenceSet` doesn't need `DecidableEq` |
Now it only requires `Fintype (G.neighborSet v)`.
This caused `incidenceFinset` and theorems about it to complain that `DecidableEq` is unused, so I changed `incidenceFinset` to require `Fintype (G.incidenceSet v)` and fixed the theorems. Theorems that require a finite `neighborSet` can avoid this.
---
The theorem below it also doesn't need `DecidableEq` anymore.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/10 |
Mathlib/Combinatorics/SimpleGraph/Finite.lean |
1 |
1 |
['github-actions'] |
nobody |
24-61085 24 days ago |
24-61659 24 days ago |
24-62182 24 days |
| 41668 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Decomp): `dropUntil` API to match existing `takeUntil` API |
---
Slightly more complicated theorems than usual "API" though.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
56/9 |
Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean |
1 |
1 |
['github-actions'] |
nobody |
24-56536 24 days ago |
24-57104 24 days ago |
25-61382 25 days |
| 41435 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Hamiltonian): a graph with a Hamiltonian path is connected |
and other small Hamiltonian lemmas.
---
The new public import is needed because `Nat.card` was previously only imported privately.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
87/18 |
Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean |
1 |
1 |
['github-actions'] |
nobody |
24-43880 24 days ago |
29-44607 29 days ago |
31-63054 31 days |
| 41722 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Connectivity/Subgraph): `mapToSubgraph` API |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
36/0 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean |
1 |
1 |
['github-actions'] |
nobody |
24-42449 24 days ago |
24-43055 24 days ago |
24-43043 24 days |
| 28686 |
mitchell-horner author:mitchell-horner |
feat(Combinatorics/SimpleGraph): prove the Erdős-Stone theorem |
Proves the Erdős-Stone theorem:
If `G` has at least `(1 - 1 / r + o(1)) * n ^ 2 / 2` many edges, then `G` contains a copy of a `completeEquipartiteGraph (r + 1) t`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #28685
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
|
205/1 |
Mathlib/Combinatorics/SimpleGraph/Extremal/ErdosStoneSimonovits.lean |
1 |
8 |
['barni120400', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'mitchell-horner'] |
nobody |
24-28168 24 days ago |
35-21061 35 days ago |
35-30128 35 days |
| 41709 |
metakunt author:metakunt |
feat(Data/Multiset): change definition of Multiset.Pairwise |
Currently the definition of Multiset.Pairwise seems not right to me. For my project I need to get a decidable instance for a Finset.Pairwise, but the current definition doesn't seem correct and it can't even give me a decidable instance of Pairwise. |
t-data
large-import
|
71/60 |
Mathlib/Data/Finsupp/BigOperators.lean,Mathlib/Data/Fintype/List.lean,Mathlib/Data/Multiset/Bind.lean,Mathlib/Data/Multiset/Defs.lean,Mathlib/Data/Multiset/Pairwise.lean,Mathlib/Data/Multiset/Replicate.lean,Mathlib/Data/Multiset/ZeroCons.lean,Mathlib/Logic/Relation.lean |
8 |
13 |
['SnirBroshi', 'github-actions', 'metakunt'] |
nobody |
24-20494 24 days ago |
24-20494 24 days ago |
24-20493 24 days |
| 41737 |
jjdishere author:jjdishere |
feat(CategoryTheory/AB5): AB5 instance of Ab with universe variables |
When u <= v <= w, we show `AB5OfSize.{u, v} Ab.{w}`.
(Only `AB5OfSize.{u, u + 1} Ab.{u + 1}` is need in my further application.)
Co-authored-by: @chrisflav
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
13/1 |
Mathlib/Algebra/Category/Grp/AB.lean |
1 |
1 |
['github-actions'] |
nobody |
24-16951 24 days ago |
24-17527 24 days ago |
24-17515 24 days |
| 41415 |
tb65536 author:tb65536 |
feat(FieldTheory/AbsoluteGaloisGroup): functoriality of `absoluteGaloisGroup` |
This PR proves functionality of `absoluteGaloisGroup`.
Upstreamed from FLT.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41416
- [x] depends on: #41417
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
FLT
label:t-algebra$ |
49/1 |
Mathlib/FieldTheory/AbsoluteGaloisGroup.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
24-11407 24 days ago |
24-15777 24 days ago |
24-15767 24 days |
| 41743 |
themathqueen author:themathqueen |
chore: move `ContinuousLinearMap.extend` from `Analysis` to `Topology` |
According to #29888, the original definition was by Zhouhang Zhou in 2019, so I adjusted the copyright to that year.
No code is altered besides adding `public` and `@[expose]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
74/61 |
Mathlib.lean,Mathlib/Analysis/Normed/Operator/Extend.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Extend.lean |
3 |
1 |
['github-actions'] |
nobody |
24-10253 24 days ago |
24-11260 24 days ago |
24-11650 24 days |
| 40857 |
BryceT233 author:BryceT233 |
feat(RingTheory/Radical): radical of principal ideals in a UFD |
This PR resolves the "TODO" in `RingTheory/Radical/Basic.lean` by connecting `UniqueFactorizationMonoid.radical` with `Ideal.radical`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
large-import
|
44/4 |
Mathlib/RingTheory/Radical/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
23-73951 23 days ago |
47-56278 47 days ago |
47-56266 47 days |
| 37603 |
Parcly-Taxel author:Parcly-Taxel |
refactor: review of `SetSemiring` |
* Rename `Set.up` and `SetSemiring.down` to `SetSemiring.ofSet` and `SetSemiring.toSet` respectively. Unprotect both and make them equivalences, following `FreeMonoid`.
* Derive `CompleteAtomicBooleanAlgebra` for `SetSemiring` immediately.
* Add `imageHom_id` and `imageHom_comp`. The three existing lemmas about `imageHom` are coalesced into `imageHom_apply`.
Ultimately inspired by https://github.com/leanprover-community/mathlib4/pull/36934#issuecomment-4183475568. |
t-data |
119/164 |
Mathlib/Algebra/Algebra/Operations.lean,Mathlib/Data/Set/Semiring.lean |
2 |
45 |
['Parcly-Taxel', 'YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'ocfnash', 'sgouezel'] |
nobody |
23-68014 23 days ago |
23-69994 23 days ago |
59-80766 59 days |
| 41524 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Trails): in a preconnected Eulerian graph there exists an Eulerian circuit from any vertex |
This lets us take a circuit at a specific vertex, much like [`IsHamiltonian.exists_isHamiltonianCycle`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Combinatorics/SimpleGraph/Hamiltonian.html#SimpleGraph.IsHamiltonian.exists_isHamiltonianCycle) in Hamiltonian graphs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
23/1 |
Mathlib/Combinatorics/SimpleGraph/Trails.lean |
1 |
4 |
['SnirBroshi', 'github-actions', 'vlad902'] |
nobody |
23-67148 23 days ago |
29-53156 29 days ago |
29-53144 29 days |
| 38871 |
0xTerencePrime author:0xTerencePrime |
feat(Combinatorics/SimpleGraph): add parity lemmas for outer and inner vertices |
Adds three lemmas to `SimpleGraph.DegreeSum`:
- `sum_degrees_option_zmod_two`: the handshaking lemma for `Option I` over ZMod 2
- `degree_none_zmod_two_eq_sum`: simp-normal form of the above
- `card_degree_one_option_eq_outer_zmod_two`: under degree bound ≤ 2, count of degree-1 inner vertices equals outer vertex degree mod 2 |
t-combinatorics
new-contributor
|
65/3 |
Mathlib/Combinatorics/SimpleGraph/DegreeSum.lean |
1 |
6 |
['0xTerencePrime', 'SnirBroshi', 'github-actions'] |
nobody |
23-66973 23 days ago |
96-24658 96 days ago |
96-24646 96 days |
| 40276 |
gasparattila author:gasparattila |
feat(Order/Partition/Finpartition): lemmas for `restrict` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
34/1 |
Mathlib/Order/Partition/Finpartition.lean |
1 |
1 |
['github-actions', 'madvorak'] |
nobody |
23-37099 23 days ago |
62-74478 62 days ago |
62-74466 62 days |
| 41702 |
smmercuri author:smmercuri |
chore: make `adicCompletion` and `Completion` print nicer |
- Stop `toCompletion` and `ofCompletion` printing with braces
- Arguments to `completionMap` should be explicit.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
37/6 |
Mathlib/NumberTheory/NumberField/Completion/InfinitePlace.lean,Mathlib/NumberTheory/NumberField/Completion/LiesOverInstances.lean,Mathlib/RingTheory/DedekindDomain/AdicValuation.lean |
3 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
23-11901 23 days ago |
23-14335 23 days ago |
24-68536 24 days |
| 41291 |
tb65536 author:tb65536 |
refactor(RingTheory/IntegralClosure/IsIntegral/Basic): use `FaithfulSMul` in `isIntegral_algebraMap_iff` |
Currently `isIntegral_algebraMap_iff` takes an explicit assumption stating that `algebraMap A B` is nonzero, but a `[FaithfulSMul A B]` typeclass is more idiomatic (and can almost always be inferred automatically).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
25/30 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Algebra.lean,Mathlib/NumberTheory/Niven.lean,Mathlib/NumberTheory/NumberField/CMField.lean,Mathlib/NumberTheory/NumberField/Cyclotomic/Basic.lean,Mathlib/RingTheory/Adjoin/PowerBasis.lean,Mathlib/RingTheory/IntegralClosure/IntegralRestrict.lean,Mathlib/RingTheory/IntegralClosure/IntegrallyClosed.lean,Mathlib/RingTheory/IntegralClosure/IsIntegral/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Defs.lean,Mathlib/RingTheory/Invariant/Galois.lean,Mathlib/RingTheory/IsGaloisGroup/Basic.lean,Mathlib/RingTheory/Norm/Transitivity.lean,Mathlib/RingTheory/Trace/Basic.lean,Mathlib/RingTheory/ZariskisMainTheorem.lean |
15 |
2 |
['github-actions', 'plp127'] |
nobody |
23-11665 23 days ago |
23-16343 23 days ago |
36-19520 36 days |
| 41781 |
teng10 author:teng10 |
feat(Algebra/Representation): add abstract permutation action in TensorPower |
Hello, I'm a new contributor. I had an introduction here on [zulip](https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Introduction.3A.20Schur.20Weyl.20Duality/with/607194314)
This PR is a first step in formalizing Shur Weyl duality, which I got feedback that it would be useful to mathlib. The final statement I had in mind has the form
/--
The centralizer of `{g^{⊗k} | g ∈ End(V)}`equals `Span{W_σ | σ ∈ S_k}`, for all dimensions `d` and tensor powers `k`.
---/
This PR tries to define permutation action on TensorPower; define permutation image space.
An initial version of the definition is more specific to the Euclidean space (for reference I list them below)
```
open scoped TensorProduct
variable {d : ℕ} {k : ℕ}
/-- The `k`-fold tensor power of `ℂ^d`, defined as `⨂[ℂ] (i : Fin k), (Fin d → ℂ)`. -/
abbrev PiTensorPower (d k : ℕ) : Type :=
PiTensorProduct ℂ (fun (_ : Fin k) => (Fin d → ℂ))
/-- The permutation operator `W_σ` on the tensor power `V^{⊗k}`.
Given `σ : Equiv.Perm (Fin k)`, this acts by permuting the tensor factors:
`W_σ (v₁ ⊗ ⋯ ⊗ vₖ) = v_{σ⁻¹(1)} ⊗ ⋯ ⊗ v_{σ⁻¹(k)}`. -/
def permAction (d : ℕ) {k : ℕ} (σ : Equiv.Perm (Fin k)) :
PiTensorPower d k ≃ₗ[ℂ] TensV d k :=
PiTensorProduct.reindex ℂ (fun (_ : Fin k) => (Fin d → ℂ)) σ
/-- The set of permutation operators in `End(V^{⊗k})`. -/
def permImage (d k : ℕ) : Set (Module.End ℂ (TensV d k)) :=
Set.range (fun σ : Equiv.Perm (Fin k) => (permAction d σ).toLinearMap)
```
LLM acknowledgement: I have used aristotle to write these definitions. However, I am very motivated to learn how to write proper code. I have looked more into `PiTensorProduct` and `TensorPower` module and came to the abstract version in the PR. I tried to ask aristotle about how it's defining things and whether it's suitable for mathlib.
And I would very much appreciate your thoughts on how appropriate these definitions are. Thanks for your time!
Yanting
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
new-contributor
label:t-algebra$ |
22/0 |
Mathlib/LinearAlgebra/TensorPower/Basic.lean |
1 |
4 |
['github-actions', 'teng10'] |
nobody |
23-11284 23 days ago |
23-13884 23 days ago |
23-13888 23 days |
| 41777 |
ADedecker author:ADedecker |
chore: switch `IsQuasiInverse.of_comp_[left, right]` |
Also add a bit of doc and switch some arguments to enforce some asymmetry in the API for `IsQuasiInverse`: as a convention, we think of the first argument as a quasi-inverse to the second one, instead of the converse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
36/22 |
Mathlib/Algebra/Module/LinearMap/FiniteRange.lean |
1 |
1 |
['github-actions'] |
nobody |
23-11175 23 days ago |
23-14993 23 days ago |
23-14981 23 days |
| 41774 |
gasparattila author:gasparattila |
feat(Topology/Algebra): topology on `ContinuousAffineMap` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
large-import
|
236/4 |
Mathlib.lean,Mathlib/Analysis/Normed/Affine/ContinuousAffineMap.lean,Mathlib/Topology/Algebra/ContinuousAffineMap/Topology.lean,Mathlib/Topology/Algebra/Group/Torsor.lean |
4 |
1 |
['github-actions'] |
nobody |
23-10416 23 days ago |
23-13797 23 days ago |
23-14908 23 days |
| 41403 |
YaelDillies author:YaelDillies |
chore(Algebra/SkewMonoidAlgebra): deprecate `sum` |
One should just use `Finsupp.sum` instead.
---
- [x] depends on: #41365
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
125/154 |
Mathlib/Algebra/SkewMonoidAlgebra/Basic.lean,Mathlib/Algebra/SkewMonoidAlgebra/Lift.lean,Mathlib/Algebra/SkewMonoidAlgebra/Support.lean,Mathlib/Algebra/SkewPolynomial/Basic.lean |
4 |
15 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
23-2330 23 days ago |
30-27593 30 days ago |
30-31183 30 days |
| 41793 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph): `fromEdgeSet edgeSet` for subgraphs and walks |
`fromEdgeSet G'.edgeSet = G'.spanningCoe` for a subgraph `G'`
`fromEdgeSet p.edgeSet = p.toSubgraph.spanningCoe` for a walk `p`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
16/2 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
3 |
1 |
['github-actions'] |
nobody |
22-83203 22 days ago |
22-83780 22 days ago |
22-83768 22 days |
| 41800 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): `IsTrail` `concat` iff |
---
Also golf and fix the name of `concat_isPath_iff`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/5 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean |
1 |
1 |
['github-actions'] |
nobody |
22-76634 22 days ago |
22-77240 22 days ago |
22-77228 22 days |
| 41803 |
benjub author:benjub |
feat(Topology/order/IntermediateValue): continuous induction from sSup membership |
Add `mem_of_csSup_mem_of_forall_exists_gt`, that generalizes `IsClosed.mem_of_ge_of_forall_exists_gt` by weakening the closedness hypothesis to membership of the supremum. Derive `IsClosed.mem_of_ge_of_forall_exists_gt` from it.
---
This result was already in essence in `IsClosed.mem_of_ge_of_forall_exists_gt`, which uses closedness only to obtain membership of the supremum.
This new result does not require `[TopologicalSpace α] [OrderTopology α]` (it is purely order-theoretic), but I still placed it next to `IsClosed.mem_of_ge_of_forall_exists_gt`. I am open to moving it to another file if the reviewer sees fit.
There are cases where that more general lemma is needed, because closedness either does not hold or would be longer to prove. For instance, I need that generalization to shorten the proof in the draft PR #41552. |
t-topology
new-contributor
|
21/11 |
Mathlib/Topology/Order/IntermediateValue.lean |
1 |
3 |
['benjub', 'github-actions'] |
nobody |
22-67882 22 days ago |
22-69757 22 days ago |
22-69745 22 days |
| 38815 |
dagurtomas author:dagurtomas |
feat(Tactic/CategoryTheory): extend `@[to_app]` to natural transformations |
This extends the `@[to_app]` attribute so it also generates componentwise lemmas from equalities of natural transformations between functors, while preserving the existing bicategory behavior. It also ensures generated component lemmas remain usable by dsimp when they are definitionally true. |
t-category-theory
LLM-generated
t-meta
|
148/22 |
Mathlib/Tactic/CategoryTheory/ToApp.lean,Mathlib/Util/AddRelatedDecl.lean,MathlibTest/CategoryTheory/ToApp.lean |
3 |
1 |
['github-actions'] |
nobody |
22-66974 22 days ago |
98-6074 98 days ago |
98-6116 98 days |
| 37680 |
IvanRenison author:IvanRenison |
feat(Combinatorics/SimpleGraph/Clique): add lemmas about isomorphisms and cliques |
---
Idea from this Zulip thread: [#**graph theory>Second Order Monadic Logic for Graph** ](https://leanprover.zulipchat.com/#narrow/channel/252551-graph-theory/topic/Second.20Order.20Monadic.20Logic.20for.20Graph/with/583013775)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37649
- [x] depends on: #37640
- [x] depends on: #37676
- [x] depends on: #37697
- [x] depends on: #37700
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
86/0 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean |
1 |
6 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
22-66972 22 days ago |
61-21149 61 days ago |
61-21669 61 days |
| 39288 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/Subgraph): add `Embedding.ofIsInduced` and `IsInduced.map` |
Three additions to the `SimpleGraph.Subgraph` API for induced subgraphs. `Embedding.ofIsInduced` is the canonical embedding of an induced subgraph into its ambient graph, paired with `toHom_ofIsInduced` and `ofIsInduced_apply` lemmas. This is the embedding counterpart of `Subgraph.hom`, which only produces a homomorphism because non-induced subgraphs do not reflect adjacency. `Subgraph.IsInduced.map` then records that the image of an induced subgraph under a graph embedding is induced, strengthened to `IsInduced.map_iff` for the iso case.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
**Orthogonal pre-requisite of the `Copy` / `InducedCopy` refactor-feat stack.**
Extracted as a prerequisite from #38631 that is otherwise independent of the wider `Copy` / `InducedCopy` refactor-feat stack. |
t-combinatorics |
27/4 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
2 |
16 |
['FordUniver', 'SnirBroshi', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
22-66971 22 days ago |
74-44714 74 days ago |
85-80618 85 days |
| 39505 |
dannyhe652 author:dannyhe652 |
feat(SimpleGraph): add Vizing's theorem for edge coloring |
Hi! I'm a high school student interested in formulization of mathematics in Lean. Recently, I have worked on a project to formulize Vizing Theorem with Daniel Raggi from Cambridge University with AI assistance. In particular, we first drafted an outline for the proof, and built the proof using Claude Opus 4.5 and 4.6. The proof is optimized using Aristotle and finally reviewed by ourselves. We rewrote some parts of the code and some comments. The code now builds cleanly and we wish this code to be reviewed by Lean Community. I am aware that there are previous attempts, some being successful, on formulizing Vizing Theorem, including this one by Arohee https://github.com/aroheebhoja/vizing. However, I believe that no PR have been made. Our proof is not based on his proof, but it could be helpful for the community to review that project as well. I sincerely thank everyone who has time to verify and review our code. A summary of the project is as follows. Please contact me if there are any questions or problems.
## Summary
This PR completes the proof of **Vizing's theorem** for edge coloring in simple graphs, proving that the chromatic index of any graph is either Δ (the maximum degree) or Δ + 1.
## Changes
### New files
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeColoring.lean`** — Core definitions
- `edgeColoring`: Type for line graph colorings
- `edgeColorable`: Graph is edge-colorable with n colors
- `chromaticIndex`: Chromatic index as ℕ
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/KempeChain.lean`** — Kempe Chain
- Coloring observables: `incidentEdges`, `incidentColors`, `missingColors`
- Kempe subgraph structure with bounded degree
- `swapKempe`: Recolor edges in a connected component via color-swapping
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/VizingFan.lean`** — Vizing Fan Rotation
- `IsFan`: Vizing fan structure with special color properties
- Fan maximality and dichotomy on terminal vertices
- `rotate_termA`: Extend coloring when a free color exists at both endpoints
- `vizingAdjacencyLemma`: Main adjacency lemma for both cases
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/VizingTheorem.lean`** — Main theorems
- `edge_eq_of_color_eq`: Proper edge colorings assign different colors to distinct edges sharing a vertex
- `maxDegree_le_chromaticIndex`: χ'(G) ≥ Δ(G)
- `chromaticIndex_bot`: Empty graph has chromatic index 0
- `vizingUpperBound_aux`: Inductive proof of upper bound on number of edge
- `vizingTheorem`: χ'(G) ∈ {Δ(G), Δ(G) + 1}
### Modified files
- `Mathlib.lean` — Added imports for the four new coloring modules
## Technical Approach
**Lower bound** (χ'(G) ≥ Δ):
- Edges incident to a max-degree vertex form a clique in the line graph
- Clique number lower-bounds chromatic number
**Upper bound** (χ'(G) ≤ Δ + 1):
- Induction on the number of edges
- Base case: empty graph colored with 0 colors
- Inductive step:
- If a free color exists at both endpoints of an edge, then extend directly
- Otherwise:
- Build a maximal fan from one endpoint
- Apply dichotomy: either extend via Term-A (free color at both endpoints) or Term-B (Kempe swap)
- Term-B uses a three-vertex connectivity argument to derive a contradiction, forcing the fan to extend
## Key Lemmas
- `incidentEdges`, `incidentColors`, `missingColors`: Coloring observables at vertices
- `kempeSubgraph`: Restricted subgraph of edges with two specific colors
- `swapKempe`: Recolor via Kempe chain swapping
- `IsFan.singleton`: Trivial fan always valid
- `IsFan.length_le_card`: Fan length is bounded by vertex count
- `IsFan.dichotomy`: Maximal fan satisfies Term-A or Term-B
- `IsFan.rotate_termA`: Term-A case extends the coloring inductively
- `vizingAdjacencyLemma`: Handles both cases for extending one edge
- `vizingUpperBound_aux`: Framework for full inductive proof
- `edge_eq_of_color_eq`: Distinctness of edges with same color
## Testing
All four modules compile with no `sorry` nor errors or warnings.
## References
* V. G. Vizing, *On an estimate of the chromatic class of a p-graph*,
Diskret. Analiz. 3 (1964), 25–30.
## Co-authors
Co-authored-by: Daniel Raggi <dr495@cam.ac.uk>
Co-authored-by: Aristotle (Harmonic) <aristotle-harmonic@harmonic.fun>
Co-authored-by: Claude Opus 4.5 & 4.6 <noreply@anthropic.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
|
1913/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeColoring.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/KempeChain.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/VizingFan.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/VizingTheorem.lean |
5 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
22-66970 22 days ago |
49-42231 49 days ago |
70-18072 70 days |
| 39530 |
RaggedR author:RaggedR |
feat(Combinatorics/SimpleGraph): group actions on simple graphs |
This adds the first connection between Mathlib's MulAction and SimpleGraph libraries. The GraphAction class asserts that a group action on the vertex type preserves the adjacency relation, and builds on it to define vertex-transitivity and arc-transitivity for graphs.
The GraphAction typeclass gives adj_smul_iff (the biconditional for group actions) and toIso (each group element induces a graph automorphism). The IsVertexTransitive class combines GraphAction with IsPretransitive, and IsArcTransitive requires transitivity on ordered adjacent pairs (arcs).
The main theorem is the standard characterization: a graph is arc-transitive if and only if it is vertex-transitive and locally transitive (the stabilizer of each vertex acts transitively on its neighbors). The forward direction is proved directly by composing a vertex-transporting element with a neighbor-transporting stabilizer element. The reverse direction shows that an arc-transitive graph with no isolated vertices is vertex-transitive.
These definitions are the algebraic graph theory prerequisites for formalizing coset graphs (Sabidussi's construction) and the characterization of symmetric graphs via double cosets and involutions (Lorimer's theorem).
---
LLM tools were used to assist with Lean formalization. The mathematical content is the author's own work. |
t-combinatorics
new-contributor
LLM-generated
|
130/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Action.lean |
2 |
7 |
['RaggedR', 'b-mehta', 'github-actions', 'mathlib-bors'] |
nobody |
22-66969 22 days ago |
76-30857 76 days ago |
80-85695 80 days |
| 39627 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/LapMatrix): 0 is always an eigenvalue |
and the determinant is always zero, plus a few other small lemmas.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39642
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
71/15 |
Mathlib/Combinatorics/SimpleGraph/LapMatrix.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
22-66969 22 days ago |
78-27844 78 days ago |
78-75542 78 days |
| 38328 |
astrainfinita author:astrainfinita |
feat: `OrderSupSet` |
This PR introduces `OrderSupSet` and `OrderInfSet`, which are typeclasses expressing that `sSup` (resp., `sInf`) returns the least upper bound (resp., the greatest lower bound) of a set whenever one exists.
This allows us to prove properties about the `sSup` of specific sets (such as `∅`, singletons, finite sets, and `univ`) without any typeclasses asserting the existence of LUBs. For example, `sSup ∅ = ⊥` holds for any type equipped with `OrderBot` `OrderSupSet`, no longer requiring typeclasses like `ConditionallyCompleteLinearOrderBot`.
For a general set `s`, this gives a uniform way to extend results about `IsLUB s a → motive a` to `motive (sSup s)`, `motive (⨆ i, f i)`, `motive (a ⊔ b)`, etc., which allows proof reuse for basic API such as [`csSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/ConditionallyCompleteLattice/Basic.html#csSup_insert), [`iSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/CompleteLattice/Basic.html#iSup_insert), and [`sSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/CompleteLattice/Basic.html#sSup_insert) and downstream code like [`csSup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Pointwise/CompleteLattice.html#csSup_add), [`sSup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Pointwise/CompleteLattice.html#sSup_add), and [`sup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Lattice.html#sup_add).
Furthermore, this allows us to refactor incrementally, reducing the dependency of results about various completeness typeclasses on the specific implementation of `sSup`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/Any.20infimum.20based.20version.20of.20.60OmegaCompletePartialOrder.60.3F)
[](https://gitpod.io/from-referrer/)
|
t-order |
156/73 |
Mathlib/MeasureTheory/OuterMeasure/Induced.lean,Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/Bounds/Defs.lean,Mathlib/Order/CompleteLattice/Basic.lean,Mathlib/Order/CompleteLattice/Defs.lean,Mathlib/Order/SetNotation.lean,Mathlib/Topology/UniformSpace/OfCompactT2.lean |
7 |
16 |
['JovanGerb', 'astrainfinita', 'b-mehta', 'github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'openendings', 'vihdzp'] |
nobody |
22-66968 22 days ago |
90-44290 90 days ago |
95-74986 95 days |
| 38906 |
lua-vr author:lua-vr |
feat(ConditionallyCompleteLattice/Indexed): add binary versions of lemmas |
Add binary versions of some of the lemmas. Those are useful when the domain is indexed over the members of a set.
From the Carleson project.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
carleson
|
21/5 |
Mathlib/Order/ConditionallyCompleteLattice/Indexed.lean |
1 |
19 |
['JovanGerb', 'SnirBroshi', 'github-actions', 'grunweg', 'lua-vr', 'mathlib-merge-conflicts'] |
nobody |
22-66966 22 days ago |
80-18696 80 days ago |
89-78997 89 days |
| 39438 |
SnirBroshi author:SnirBroshi |
chore(Order/WellFounded): use `to_dual` |
Creates `argmax`/`argmaxOn` duals to the existing `argmin`/`argminOn`,
and `WellFoundedLT.min`/`WellFoundedGT.max` in order to properly dualize `WellFounded.min_le`.
Some theorems about `WellFounded{LT/GT}` which didn't have a dual before have to be renamed to make room,
e.g. `StrictMono.range_inj` is renamed to `StrictMono.range_inj_of_wellFoundedLT`.
---
This is blocking dualizing things in `ConditionallyCompleteLattice/Basic.lean`.
`WellFounded.min_le` has ~30 usages in ~10 files, so deprecating it should probably happen in a separate PR.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
83/34 |
Mathlib/Data/Finset/Sort.lean,Mathlib/Order/Hom/Set.lean,Mathlib/Order/WellFounded.lean,Mathlib/SetTheory/Ordinal/Enum.lean,Mathlib/Tactic/Translate/ToDual.lean |
5 |
10 |
['JovanGerb', 'SnirBroshi', 'github-actions', 'vihdzp'] |
nobody |
22-66965 22 days ago |
83-64122 83 days ago |
83-72706 83 days |
| 39549 |
Hagb author:Hagb |
feat(Order/RelIso/Basic): `swap`s and `compl`s are `Equiv`s |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
13/8 |
Mathlib/Order/RelIso/Basic.lean |
1 |
3 |
['Hagb', 'github-actions', 'leanprover-radar'] |
nobody |
22-66964 22 days ago |
80-84888 80 days ago |
80-84876 80 days |
| 36719 |
NoneMore author:NoneMore |
feat(ModelTheory): add `PartialType` for first-order theories |
This PR adds the definitions of partial types over theories and over parameter sets, and proves several equivalent characterizations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36667
[](https://gitpod.io/from-referrer/)
|
t-logic
new-contributor
|
432/17 |
Mathlib.lean,Mathlib/ModelTheory/PartialTypes.lean,Mathlib/ModelTheory/Semantics.lean |
3 |
7 |
['NoneMore', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
22-64695 22 days ago |
22-65216 22 days ago |
30-48165 30 days |
| 41447 |
SnirBroshi author:SnirBroshi |
chore(Combinatorics/SimpleGraph/Trails): golf and cleanup |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
45/77 |
Mathlib/Combinatorics/SimpleGraph/Trails.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
22-56937 22 days ago |
31-12387 31 days ago |
31-12375 31 days |
| 41623 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Trails): a walk is Eulerian iff it is a trail of length `G.edgeSet.encard` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
|
42/7 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Trails.lean |
2 |
1 |
['github-actions'] |
nobody |
22-56731 22 days ago |
27-8265 27 days ago |
27-8253 27 days |
| 41809 |
kebekus author:kebekus |
feat: Truncated Counting Function of Value Distribution Theory |
Introduce (and provide API for) the Truncated Logarithmic Counting Functions. These differ from the Logarithmic Counting Function in that they disregard pole orders and count all poles with multiplicity one. The truncated counting function is the quantity through which the Second Main Theorem of Value Distribution Theory is classically stated.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
t-analysis
LLM-generated
|
261/0 |
Mathlib.lean,Mathlib/Analysis/Complex/ValueDistribution/LogCounting/Truncated.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
1 |
['github-actions'] |
nobody |
22-42227 22 days ago |
22-42227 22 days ago |
22-42215 22 days |
| 41762 |
felixpernegger author:felixpernegger |
chore: replace terminal `convert` with `exact` |
Replaces terminal `convert(!)` with `exact` whenever possible.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
195/192 |
Mathlib/Algebra/BigOperators/Group/List/Basic.lean,Mathlib/Algebra/Category/ModuleCat/EpiMono.lean,Mathlib/Algebra/CharP/MixedCharZero.lean,Mathlib/Algebra/DirectSum/Module.lean,Mathlib/Algebra/Group/Action/Basic.lean,Mathlib/Algebra/Group/Fin/Tuple.lean,Mathlib/Algebra/Group/Pointwise/Set/Finite.lean,Mathlib/Algebra/Module/LocalizedModule/Basic.lean,Mathlib/Algebra/Module/NatInt.lean,Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/Polynomial/AlgebraMap.lean,Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Ring/GeomSum.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Jacobian/Point.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Projective/Point.lean,Mathlib/AlgebraicGeometry/Noetherian.lean,Mathlib/AlgebraicGeometry/Properties.lean,Mathlib/AlgebraicGeometry/Spec.lean,Mathlib/Analysis/BoxIntegral/Partition/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Convolution.lean,Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/Calculus/FDeriv/ContinuousAlternatingMap.lean,Mathlib/Analysis/Calculus/FDeriv/ContinuousMultilinearMap.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/Convex/Caratheodory.lean,Mathlib/Analysis/Convex/Side.lean,Mathlib/Analysis/Convex/SpecificFunctions/Deriv.lean,Mathlib/Analysis/Fourier/AddCircle.lean,Mathlib/Analysis/FunctionalSpaces/SobolevInequality.lean,Mathlib/Analysis/Normed/Field/UnitBall.lean,Mathlib/Analysis/Normed/Lp/ProdLp.lean,Mathlib/Analysis/Normed/Lp/lpSpace.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/Orthogonality.lean,Mathlib/CategoryTheory/Abelian/Pseudoelements.lean,Mathlib/CategoryTheory/Adhesive/Basic.lean,Mathlib/CategoryTheory/Category/Basic.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/IsPullback/BicartesianSq.lean,Mathlib/CategoryTheory/Limits/Types/Coequalizers.lean,Mathlib/CategoryTheory/Localization/Opposite.lean,Mathlib/CategoryTheory/Monoidal/Internal/Module.lean,Mathlib/CategoryTheory/Monoidal/Internal/Types/Basic.lean,Mathlib/CategoryTheory/Monoidal/Internal/Types/CommGrp_.lean,Mathlib/CategoryTheory/PUnit.lean,Mathlib/CategoryTheory/PathCategory/Basic.lean,Mathlib/CategoryTheory/Sites/Types.lean,Mathlib/CategoryTheory/Subobject/Classifier/Defs.lean,Mathlib/Combinatorics/Configuration.lean,Mathlib/Combinatorics/Hindman.lean,Mathlib/Combinatorics/Nullstellensatz.lean,Mathlib/Combinatorics/SetFamily/KruskalKatona.lean,Mathlib/Combinatorics/SimpleGraph/Dart.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Chunk.lean,Mathlib/Computability/TuringMachine/ToPartrec.lean,Mathlib/Data/DFinsupp/Interval.lean,Mathlib/Data/ENNReal/Operations.lean,Mathlib/Data/Fin/Tuple/Basic.lean,Mathlib/Data/Finset/Image.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Intervals.lean,Mathlib/Data/Nat/Digits/Defs.lean,Mathlib/Data/QPF/Univariate/Basic.lean,Mathlib/Data/Sym/Basic.lean,Mathlib/FieldTheory/PrimitiveElement.lean,Mathlib/Geometry/Convex/Cone/Pointed.lean,Mathlib/Geometry/Convex/ConvexSpace/Defs.lean,Mathlib/Geometry/Euclidean/Projection.lean,Mathlib/Geometry/Manifold/ChartedSpace.lean,Mathlib/Geometry/Manifold/ContMDiff/Constructions.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/Geometry/Manifold/Sheaf/Basic.lean,Mathlib/Geometry/RingedSpace/LocallyRingedSpace/HasColimits.lean,Mathlib/Geometry/RingedSpace/OpenImmersion.lean,Mathlib/Geometry/RingedSpace/PresheafedSpace/Gluing.lean,Mathlib/GroupTheory/Finiteness.lean,Mathlib/GroupTheory/GroupAction/Quotient.lean,Mathlib/GroupTheory/Perm/Closure.lean,Mathlib/GroupTheory/Perm/Cycle/Basic.lean,Mathlib/GroupTheory/Perm/Support.lean,Mathlib/GroupTheory/Submonoid/Inverses.lean,Mathlib/LinearAlgebra/AffineSpace/AffineMap.lean,Mathlib/LinearAlgebra/AffineSpace/Centroid.lean,Mathlib/LinearAlgebra/AffineSpace/Independent.lean,Mathlib/LinearAlgebra/Dimension/LinearMap.lean,Mathlib/LinearAlgebra/Finsupp/Supported.lean,Mathlib/LinearAlgebra/Matrix/Block.lean,Mathlib/LinearAlgebra/Matrix/ToLin.lean,Mathlib/LinearAlgebra/Pi.lean,Mathlib/LinearAlgebra/PiTensorProduct/Basic.lean,Mathlib/LinearAlgebra/StdBasis.lean,Mathlib/LinearAlgebra/TensorAlgebra/Basic.lean,Mathlib/Logic/Equiv/Fin/Basic.lean,Mathlib/Logic/Equiv/Fintype.lean,Mathlib/MeasureTheory/Function/ConvergenceInDistribution.lean,Mathlib/MeasureTheory/Function/Jacobian.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/Basic.lean,Mathlib/MeasureTheory/Group/Measure.lean,Mathlib/MeasureTheory/Integral/FinMeasAdditive.lean,Mathlib/MeasureTheory/Measure/Content.lean |
152 |
15 |
['Parcly-Taxel', 'adomani', 'chenson2018', 'felixpernegger', 'github-actions', 'grunweg', 'leanprover-radar', 'mathlib-bors'] |
nobody |
22-37480 22 days ago |
23-13473 23 days ago |
23-40146 23 days |
| 29744 |
espottesmith author:espottesmith |
feat(Combinatorics): define directed hypergraphs |
This PR defines directed hypergraphs:
```
@[ext]
structure DiHypergraph (α : Type*) where
/-- The vertex set -/
vertexSet : Set α
/-- The edge set -/
edgeSet : Set ((Set α) × (Set α))
/-- Each edge is a pair (s, d), where s ⊆ vertexSet and d ⊆ vertexSet -/
edge_src_dst_isSubset_vertexSet' : ∀ ⦃e⦄, e ∈ edgeSet → e.1 ⊆ vertexSet ∧ e.2 ⊆ vertexSet
```
Additional definitions:
- tail/head stars and negative/positive stars
- some special cases (B-Graph, F-Graph, BF-Graph, and what I'm calling a "non-endless" dihypergraph, where neither the source/tail nor the destination/head are empty)
- Vertex and (hyper)edge adjacency
- isolated vertices
- empty and nonempty dihypergraphs
The design employed here is based off of #28613, but this PR does not depend on that one.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
290/0 |
Mathlib.lean,Mathlib/Combinatorics/DiHypergraph/Basic.lean |
2 |
5 |
['b-mehta', 'espottesmith', 'github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
22-19005 22 days ago |
47-16013 47 days ago |
184-19749 184 days |
| 41200 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): pure morphisms |
In this PR, we define the notion of `κ`-pure morphisms (`IsCardinalPure`) in a category `C`. This class contains split monomorphisms and is stable under `κ`-filtered colimits. When `C` is a `κ`-accessible category, we show that `κ`-pure morphisms are monomorphisms.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
|
187/6 |
Mathlib.lean,Mathlib/CategoryTheory/Presentable/Basic.lean,Mathlib/CategoryTheory/Presentable/CardinalPure.lean |
3 |
16 |
['github-actions', 'joelriou', 'smorel394'] |
nobody |
22-16938 22 days ago |
34-26524 34 days ago |
37-80595 37 days |
| 41821 |
Timeroot author:Timeroot |
chore(Order/Basic): add grind _=_ to Subtype.coe_lt_coe, coe_le_coe |
Add grind annotations to Subtype.coe_le_coe and Subtype.coe_lt_coe.
As noted in [this zulip thread](https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/grind.20failures/near/610812085), grind was failing to solve some fairly simple goals, and I think these are generally good annotations to have. (I think they will usually fire usefully.)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
2/2 |
Mathlib/Order/Basic.lean |
1 |
4 |
['Timeroot', 'github-actions', 'leanprover-radar'] |
nobody |
22-12908 22 days ago |
22-18311 22 days ago |
22-18299 22 days |
| 41732 |
vaca22 author:vaca22 |
feat(RingTheory/ClassGroup): add mulEquiv_mk0 |
Add a simp lemma describing how the class-group equivalence induced by a ring equivalence acts on the class of a nonzero ideal.
The image is the class of the ideal mapped along the ring equivalence. The proof compares the corresponding fractional ideals through the existing class-group equivalence and localization membership API.
**AI disclosure**: this PR is primarily LLM-generated (Claude Code).
|
t-ring-theory
new-contributor
LLM-generated
|
43/0 |
Mathlib/RingTheory/ClassGroup/Basic.lean |
1 |
3 |
['github-actions', 'vaca22'] |
nobody |
22-7996 22 days ago |
24-23270 24 days ago |
24-23258 24 days |
| 41542 |
tb65536 author:tb65536 |
refactor(AlgebraicGeometry/Sites/Small): golf and remove some `backward.isDefEq.respectTransparency` |
This PR golfs and removes some `backward.isDefEq.respectTransparency`. Some proofs with the help of Claude, with further golfing by myself.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
LLM-generated
|
58/134 |
Mathlib/AlgebraicGeometry/Sites/Small.lean,Mathlib/CategoryTheory/Sites/Over.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
21-85614 21 days ago |
23-66166 23 days ago |
28-84138 28 days |
| 41830 |
Jun2M author:Jun2M |
feat(Data/PFun): add lemmas for ran, restrict, map, image and preimage |
Add missing simp / API lemmas for partial functions, and strengthen `preimage_inter`
from a subset inclusion to an equality. Also tag a few `Part` uniqueness lemmas
for `grind`.
- `Part`: `grind` attributes on `get_mem`, `mem_unique`, `mem_right_unique`
- `ran`: `ran_coe`, `ran_eq_empty_iff_dom_eq_empty`
- `restrict`: `dom_restrict`, `restrict_restrict`, `ran_restrict`, `preimage_restrict`
- `map`: `dom_map`, `mem_map`, `ran_map`, `image_map`, `preimage_map`
- `image` / `preimage`: `image_subset_ran`, `preimage_empty`,
`disjoint_preimage_of_disjoint`, plus `simp`/`gcongr` attributes
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
86/3 |
Mathlib/Data/PFun.lean,Mathlib/Data/Part.lean |
2 |
2 |
['github-actions'] |
nobody |
21-83526 21 days ago |
22-1812 22 days ago |
22-1800 22 days |
| 41831 |
YaelDillies author:YaelDillies |
chore(RingTheory/TwoSidedIdeal): rid the `SMulMemClass (TwoSidedIdeal R) Rᵐᵒᵖ R` instance from its `inst` |
See https://github.com/leanprover-community/mathlib4/pull/40718#discussion_r3573863027.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
1/1 |
Mathlib/RingTheory/TwoSidedIdeal/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
21-83129 21 days ago |
22-1546 22 days ago |
22-1534 22 days |
| 41823 |
tb65536 author:tb65536 |
feat(Combinatorics/Design/Defs): definitions of combinatorial designs |
This PR adds the definitions of combinatorial designs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
141/0 |
Mathlib.lean,Mathlib/Combinatorics/Design/Defs.lean |
2 |
1 |
['github-actions'] |
nobody |
21-81907 21 days ago |
21-81962 21 days ago |
21-81951 21 days |
| 41729 |
vaca22 author:vaca22 |
feat(RingTheory/DedekindDomain): add divisor group core |
Add the formal divisor group of a Dedekind domain and bundle the existing factorization API as an additive equivalence between nonzero fractional ideals and divisors.
Divisors are finitely supported integer-valued functions on height-one primes. divisor records FractionalIdeal.count, ofDivisor reconstructs a fractional ideal from prime powers, and divisorEquiv proves these operations are inverse and send ideal multiplication to divisor addition.
------------
This is the core of the earlier larger proposal. Principal divisors and weighted degrees are deliberately left for later pull requests.
**AI disclosure**: this PR is primarily LLM-generated (Claude Code).
|
t-ring-theory
new-contributor
LLM-generated
|
100/0 |
Mathlib.lean,Mathlib/RingTheory/DedekindDomain/Divisor.lean |
2 |
4 |
['github-actions', 'grunweg', 'vaca22'] |
nobody |
21-77843 21 days ago |
21-77843 21 days ago |
23-75034 23 days |
| 33157 |
wwylele author:wwylele |
feat(Combinatorics): partitions and pentagonal numbers |
We prove a corollary of pentagonal number theorem: the number of partitions with odd number of distinct parts and the number of partitions with even number of distinct parts are either equal (n is not pentagonal), or (-1)^k for the k-th pentagonal number
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #33143
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
92/0 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Partition/Basic.lean,Mathlib/Combinatorics/Enumerative/Partition/Pentagonal.lean |
3 |
8 |
['copilot-pull-request-reviewer', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
21-68019 21 days ago |
21-69625 21 days ago |
21-70284 21 days |
| 39935 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/Finite): LocallyFiniteOrder |
Adds an order-theoretic `LocallyFiniteOrder (SimpleGraph V)` instance (closed intervals are finite), distinct from the existing graph-theoretic `LocallyFinite` (vertex degrees) already in this file. The instance takes `DecidableLE` as an explicit hypothesis rather than routing through `Classical`, because per-graph `DecidableRel G.Adj` is value-dependent and cannot be a free global instance.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
Came up while writing a Möbius inversion between copy counts and induced copy counts ([WIP](https://github.com/FordUniver/mathlib4/pull/36/changes)) that sums over the closed interval `Finset.Icc G ⊤` of supergraphs. Decidability of the order plus local-finiteness of the lattice felt like a clean standalone piece to land first, before the rest of the Möbius file.
Less sure about what the conventions for declaring type class instances are in mathlib, let me know if this is not of the expected shape or should not be included at all. |
t-combinatorics |
20/0 |
Mathlib/Combinatorics/SimpleGraph/Finite.lean |
1 |
1 |
['github-actions'] |
nobody |
21-66973 21 days ago |
72-14959 72 days ago |
72-14947 72 days |
| 39941 |
mkaratarakis author:mkaratarakis |
feat(Data/List): add count lemmas for duplicate detection |
## Summary
Add general list count lemmas used in the Perron–Frobenius quiver-path development:
- `List.mem_tail_of_count_ge_two`
- `List.exists_pos_get_of_dropLast_count_ge_two`
Relocated from the PF-specific file per review feedback. Proofs use upstream `List.Duplicate` API and `grind` where appropriate (per @chenson2018).
Part of the Perron–Frobenius formalization (with @or4nge19).
## Test plan
- [x] `lake build Mathlib.Data.List.Count`
- [x] `lake build Mathlib.Combinatorics.Quiver.Path.PerronFrobenius` (on integration branch)
cc @or4nge19 for review |
t-data |
24/0 |
Mathlib/Data/List/Count.lean |
1 |
3 |
['chenson2018', 'github-actions', 'mkaratarakis'] |
nobody |
21-66953 21 days ago |
72-1173 72 days ago |
72-1761 72 days |
| 40005 |
tautschnig author:tautschnig |
feat(Data/ZMod/Basic): isUnit characterisation in prime power moduli |
Add two lemmas characterising units in ZMod (p^n) via divisibility of the canonical lift:
isUnit_iff_not_prime_dvd_val: for prime p and n > 0,
IsUnit x ↔ ¬ p ∣ x.val.
not_isUnit_iff_prime_dvd_val: for prime p and n > 0,
¬ IsUnit x ↔ p ∣ x.val.
These specialise the existing isUnit_iff_coprime to prime power moduli, where the coprimality condition reduces to a simple divisibility check on the unique prime factor.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
15/0 |
Mathlib/Data/ZMod/Basic.lean |
1 |
3 |
['copilot-pull-request-reviewer', 'github-actions'] |
nobody |
21-66952 21 days ago |
70-41839 70 days ago |
70-41827 70 days |
| 40590 |
BryceT233 author:BryceT233 |
feat(RingTheory/AdjoinRoot): more on `AdjoinRoot' of monic polynomials |
This PR adds some missing basic API for `AdjoinRoot p` where `p` is a monic polynomial.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
27/0 |
Mathlib/RingTheory/AdjoinRoot.lean |
1 |
1 |
['github-actions'] |
nobody |
21-62154 21 days ago |
42-58065 42 days ago |
54-41553 54 days |
| 41427 |
YaelDillies author:YaelDillies |
refactor(Algebra/MvPolynomial): delete `coeff` |
... without a deprecation because we want dot notation to resolve to `AddMonoidAlgebra.coeff`.
For migration, replace bare `MvPolynomial.coeff`s with `AddMonoidAlgebra.coeff`. Dot notation `.coeff` will resolve to `AddMonoidAlgebra.coeff` without further change. `MvPolynomial.coeff m p` corresponds to `AddMonoidAlgebra.coeff p m`, so you will need to swap arguments. Note further that `AddMonoidAlgebra.coeff p` is bundled as a `Finsupp` while `MvPolynomial.coeff` is a bare function.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
label:t-algebra$ |
243/245 |
Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Division.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/MvPolynomial/Eval.lean,Mathlib/Algebra/MvPolynomial/Funext.lean,Mathlib/Algebra/MvPolynomial/Monad.lean,Mathlib/Algebra/MvPolynomial/Nilpotent.lean,Mathlib/Algebra/MvPolynomial/NoZeroDivisors.lean,Mathlib/Algebra/MvPolynomial/PDeriv.lean,Mathlib/Algebra/MvPolynomial/Rename.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Combinatorics/Nullstellensatz.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/RingTheory/Extension/Generators.lean,Mathlib/RingTheory/Extension/Presentation/Basic.lean,Mathlib/RingTheory/MvPolynomial/Basic.lean,Mathlib/RingTheory/MvPolynomial/FreeCommRing.lean,Mathlib/RingTheory/MvPolynomial/Groebner.lean,Mathlib/RingTheory/MvPolynomial/Homogeneous.lean,Mathlib/RingTheory/MvPolynomial/IrreducibleQuadratic.lean,Mathlib/RingTheory/MvPolynomial/MonomialOrder.lean,Mathlib/RingTheory/MvPolynomial/WeightedHomogeneous.lean,Mathlib/RingTheory/MvPowerSeries/Basic.lean,Mathlib/RingTheory/MvPowerSeries/Trunc.lean,Mathlib/RingTheory/NoetherNormalization.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Polynomial/IsIntegral.lean,Mathlib/RingTheory/Polynomial/Quotient.lean,Mathlib/RingTheory/Spectrum/Prime/Polynomial.lean,Mathlib/RingTheory/TensorProduct/MvPolynomial.lean |
35 |
11 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
nobody |
21-51193 21 days ago |
21-52697 21 days ago |
30-22858 30 days |
| 41845 |
tb65536 author:tb65536 |
chore(GroupTheory/GroupAction/Defs): remove duplicate subgroup action instances |
This PR removes a few duplicate subgroup action instances.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
0/9 |
Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/GroupTheory/GroupAction/Defs.lean |
2 |
1 |
['github-actions'] |
nobody |
21-22014 21 days ago |
21-69809 21 days ago |
21-69798 21 days |
| 32294 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Angle/Incenter): distance from second intersection with circumcircle |
Add the following lemma: given a triangle ABC, suppose an angle bisector from A through the incenter or excenter I meets the circumcircle again at X (including the case of an external bisector at A tangent to the circle, in which case X = A). Then XB = XI (= XC, by applying this lemma again). This is a standard configuration: https://en.wikipedia.org/wiki/Incenter%E2%80%93excenter_lemma
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #30981
- [ ] depends on: #30982
- [ ] depends on: #32019
- [ ] depends on: #32021
- [ ] depends on: #32023
- [ ] depends on: #32270
- [ ] depends on: #32290
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
214/0 |
Mathlib/Geometry/Euclidean/Angle/Incenter.lean |
1 |
13 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'peakpoint'] |
nobody |
21-16572 21 days ago |
35-32433 35 days ago |
133-2510 133 days |
| 41863 |
scholzhannah author:scholzhannah |
chore(Order/Filter/Extr): rename various lemmas |
Per the mathlib naming conventions
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
95/61 |
Mathlib/Analysis/Calculus/LocalExtr/LineDeriv.lean,Mathlib/Analysis/Complex/AbsMax.lean,Mathlib/Order/Filter/Extr.lean,Mathlib/Topology/Order/LocalExtr.lean,Mathlib/Topology/Order/Rolle.lean |
5 |
2 |
['github-actions'] |
nobody |
21-10938 21 days ago |
21-10985 21 days ago |
21-10981 21 days |
| 41865 |
scholzhannah author:scholzhannah |
chore(Topology/Order/LocalExtr): rename several theorems |
Per the mathlib naming conventions. Also discussed on Zulip [#mathlib4 > Renaming `IsLocalMin.on` and `IsMinOn.localize`](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Renaming.20.60IsLocalMin.2Eon.60.20and.20.60IsMinOn.2Elocalize.60/with/611258354).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
40/21 |
Mathlib/Analysis/Calculus/Darboux.lean,Mathlib/Analysis/Calculus/LocalExtr/Basic.lean,Mathlib/Analysis/Convex/Extrema.lean,Mathlib/Analysis/InnerProductSpace/Rayleigh.lean,Mathlib/Topology/Order/LocalExtr.lean |
5 |
1 |
['github-actions'] |
nobody |
21-10233 21 days ago |
21-10287 21 days ago |
21-10285 21 days |
| 41861 |
stalex444 author:stalex444 |
feat(Algebra/Order/Floor): floor-of-sum dichotomy via fractional parts |
This PR adds four lemmas in Mathlib/Algebra/Order/Floor/Ring.lean, placed in the fractional-part section, complementing the existing one-sided bounds le_floor_add and le_floor_add_floor.
Here are the lemmas:
* floor_add_eq — writes ⌊a + b⌋ exactly as ⌊a⌋ + ⌊b⌋ + ⌊fract a + fract b⌋
* floor_add_eq_add_iff — the floors add exactly ⟺ the fractional parts sum below 1
* floor_add_eq_add_add_one_iff — the +1 case ⟺ the fractional parts sum to at least 1
* floor_add_eq_or — the dichotomy: it's always one or the other
The library has the two inequalities but not the exact case analysis, and this closes that small gap. In addition, these are the lemmas for the mechanical/Beatty-word development proposed here --https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Sturmian.20.28mechanical.29.20words/near/610836902.
Claude helped draft the Lean code; I reviewed the code, built the module locally, and it compiled.
---
I'm flexible on the lemma names should reviewers prefer different forms
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
new-contributor
label:t-algebra$ |
25/0 |
Mathlib/Algebra/Order/Floor/Ring.lean |
1 |
5 |
['BoltonBailey', 'github-actions', 'stalex444'] |
nobody |
21-4782 21 days ago |
21-4782 21 days ago |
21-14344 21 days |
| 41864 |
kebekus author:kebekus |
feat: estimate for logarithmic counting functions |
In preparation to the proof of the "Lemma of Logarithmic Derivatives" of Value Distribution Theory, establish the standard "Counting Estimate" for the logarithmic counting function. Simplify and streamline the API for restrictions of divisors a little.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
LLM-generated
|
124/15 |
Mathlib/Analysis/Complex/ValueDistribution/FirstMainTheorem.lean,Mathlib/Analysis/Complex/ValueDistribution/LogCounting/Basic.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
1 |
['github-actions'] |
nobody |
21-4288 21 days ago |
21-4288 21 days ago |
21-4276 21 days |
| 38859 |
SnirBroshi author:SnirBroshi |
feat(Order/CompleteLattice/Basic): tag `iSup_of_empty'` with `@[simp]` |
The theorem says `iSup f = sSup ∅` when the domain of `f` is empty, and dually `iInf f = sInf ∅`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
31/47 |
Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Analysis/Normed/Lp/lpSpace.lean,Mathlib/Analysis/Seminorm.lean,Mathlib/Data/ENat/Lattice.lean,Mathlib/Data/NNReal/Basic.lean,Mathlib/Data/Set/Finite/Lattice.lean,Mathlib/LinearAlgebra/Eigenspace/Pi.lean,Mathlib/MeasureTheory/Constructions/BorelSpace/Order.lean,Mathlib/Order/CompleteLattice/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Indexed.lean,Mathlib/Order/ConditionallyCompletePartialOrder/Indexed.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/Lift.lean,Mathlib/Order/Lattice/Nat.lean |
14 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
bryangingechen assignee:bryangingechen |
20-86009 20 days ago |
21-2540 21 days ago |
95-42841 95 days |
| 41685 |
plp127 author:plp127 |
feat: free modular lattice on three generators |
We define `FreeModLatThree`, the free modular lattice on three generators, as an inductive type and prove the universal property.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
t-data
|
587/0 |
Mathlib.lean,Mathlib/Data/FreeModLatThree.lean |
2 |
6 |
['alreadydone', 'github-actions', 'plp127'] |
nobody |
20-85130 20 days ago |
20-85130 20 days ago |
24-22539 24 days |
| 39110 |
SnirBroshi author:SnirBroshi |
chore(Data/Set): reduce defeq abuse of `Set α = α → Prop` |
These are among the first places that would fail if `Set α` wasn't defeq to `α → Prop`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
35/20 |
Mathlib/Data/Set/Basic.lean,Mathlib/Data/Set/Defs.lean,Mathlib/Data/Set/Insert.lean,Mathlib/Data/Set/Prod.lean,Mathlib/Order/BooleanAlgebra/Set.lean |
5 |
27 |
['SnirBroshi', 'Vierkantor', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts', 'themathqueen', 'urkud', 'vihdzp'] |
TwoFX assignee:TwoFX |
20-85023 20 days ago |
21-1937 21 days ago |
89-27936 89 days |
| 41872 |
plp127 author:plp127 |
chore(NumberTheory/Niven): generalize theorems |
Move some theorems out of the Niven's theorem file and generalize them.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
31/19 |
Mathlib/NumberTheory/Niven.lean,Mathlib/RingTheory/IntegralClosure/IsIntegral/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean,Mathlib/RingTheory/Polynomial/RationalRoot.lean |
4 |
1 |
['github-actions'] |
nobody |
20-83550 20 days ago |
20-84696 20 days ago |
20-84876 20 days |
| 40624 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Finite): `Set.ncard` of `neighborSet` |
Since #39414 the simpNF of the cardinality of `neighborSet` uses `Set.ncard` rather than `Fintype.card`, therefore we import `Set.ncard` into `SimpleGraph/Finite.lean` and show `(G.neighborSet v).ncard = G.degree v`.
Also includes some other results that benefit from the import/lemma:
- `(commonNeighbors ⊤ u v).encard = ENat.card V - 2`
- `(G.map f).degree (f v) = G.degree v` for an injective `f`
- `G'.degree (f v) = G.degree v` for `f : G ↪g G'`, given `G'.neighborSet (f v) ⊆ Set.range f`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
|
44/7 |
Mathlib/Combinatorics/SimpleGraph/Finite.lean,Mathlib/Combinatorics/SimpleGraph/IncMatrix.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
3 |
1 |
['github-actions'] |
nobody |
20-72223 20 days ago |
53-32127 53 days ago |
53-32115 53 days |
| 41611 |
SnirBroshi author:SnirBroshi |
chore(Data/Seq/Computation): golf using `grind` |
---
- `LiftRel.refl`: ? to 12ms
- `LiftRel.symm`: 10ms to 16ms
- `LiftRel.trans`: 13ms to 23ms
- `LiftRel.imp`: 11ms to 19ms
- `terminates_of_liftRel`: 14ms to 14ms
- `rel_of_liftRel`: 11ms to 15ms
- `liftRel_of_mem`: ? to 22ms
- `liftRel_def`: 20ms to 60ms
- `liftRel_bind`: 40ms to 55ms
- `liftRel_pure_left`: 15ms to 33ms
- `liftRel_think_left`: ? to 40ms
- `liftRel_congr`: ? to 35ms
- `LiftRelAux.ret_left`: 18ms to 18ms
(the question marks mean that `trace.profiler` doesn't output anything, maybe they're below 1ms?)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
28/85 |
Mathlib/Data/Seq/Computation.lean |
1 |
5 |
['SnirBroshi', 'github-actions', 'grunweg', 'leanprover-radar'] |
nobody |
20-69737 20 days ago |
20-71288 20 days ago |
21-21480 21 days |
| 37848 |
rwst author:rwst |
feat(RingTheory/PowerSeries/Log): log and exp as inverses |
This adds the lemmas `exp_subst_log` and `log_subst_exp_sub_one`, together with two helpers needed for the proofs.
Note: I'm using Claude + Opus for supervised formalization tasks. Claude has no permission to use git on my machine.
-[ ] depends on #40571
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
LLM-generated
|
91/0 |
Mathlib/RingTheory/PowerSeries/Log.lean,Mathlib/RingTheory/PowerSeries/Substitution.lean |
2 |
17 |
['chrisflav', 'github-actions', 'rwst', 'yuanyi-350'] |
jjdishere assignee:jjdishere |
20-67876 20 days ago |
55-18127 55 days ago |
118-65757 118 days |
| 38194 |
ryanncode author:ryanncode |
feat(LinearAlgebra/BilinearForm): add indefinite metrics |
Add the `IndefiniteMetric` structure to support vector spaces equipped with a non-degenerate, symmetric, indefinite bilinear form.
Provide the algebraic foundation for indefinite inner product spaces by formalizing the metric via `LinearMap.BilinForm` and extracting its associated quadratic form without enforcing the `IsPosSemidef` typeclass.
Previously, mathlib required strictly positive-definite metrics to instantiate inner product spaces (`InnerProductSpace`), which prevented the formalization of indefinite geometries without causing typeclass inference failures. Bridge this gap by isolating the symmetric bilinear form from topological and positivity constraints, allowing the library to handle generalized indefinite metric spaces safely.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
47/0 |
Mathlib.lean,Mathlib/LinearAlgebra/BilinearForm/IndefiniteMetric.lean |
2 |
5 |
['dagurtomas', 'github-actions', 'mathlib-merge-conflicts', 'ryanncode'] |
eric-wieser assignee:eric-wieser |
20-67876 20 days ago |
76-24802 76 days ago |
91-80959 91 days |
| 39117 |
joelriou author:joelriou |
feat(CategoryTheory): the right derived functor commutes with the shift |
A few lemmas are obtained about precomposing and postcomposing left/right Kan extensions or right/left derived functors with equivalences of categories. By applying these results to the equivalences given by shifts, we construct a family of isomorphisms which shows that the right derived functor commutes with shifts, and by proving certain compatibilities, we obtain a `Functor.CommShift` instance on the right derived functor of a functor which commutes with shifts.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
large-import
|
426/9 |
Mathlib.lean,Mathlib/CategoryTheory/Functor/Derived/LeftDerived.lean,Mathlib/CategoryTheory/Functor/Derived/RightDerived.lean,Mathlib/CategoryTheory/Functor/Derived/RightDerivedCommShift.lean,Mathlib/CategoryTheory/Functor/KanExtension/AdjunctionPreserves.lean,Mathlib/CategoryTheory/Functor/KanExtension/Basic.lean,Mathlib/CategoryTheory/Shift/CommShift.lean,Mathlib/CategoryTheory/Shift/Localization.lean |
8 |
16 |
['dagurtomas', 'github-actions', 'joelriou', 'mathlib-merge-conflicts', 'robin-carlier'] |
kim-em assignee:kim-em |
20-67871 20 days ago |
21-41552 21 days ago |
60-660 60 days |
| 39366 |
akiezun author:akiezun |
feat(Data/Nat): add prime divisibility for ascFactorial and choose |
Adds two prime-divisibility lemmas for natural-number factorial/binomial APIs.
The first characterizes when a prime divides an ascending factorial:
`Nat.Prime.dvd_ascFactorial_iff`.
The second applies this to binomial coefficients:
`Nat.Prime.dvd_choose_add_sub_one_iff`, using
`Nat.ascFactorial_eq_factorial_mul_choose'` and cancellation of the `n!` factor
when `n < p`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
large-import
|
46/0 |
Mathlib.lean,Mathlib/Data/Nat/Choose/Consecutive.lean,Mathlib/Data/Nat/Factorial/BigOperators.lean |
3 |
9 |
['SnirBroshi', 'akiezun', 'github-actions', 'wwylele'] |
TwoFX assignee:TwoFX |
20-67870 20 days ago |
81-5752 81 days ago |
85-16119 85 days |
| 39504 |
WenrongZou author:WenrongZou |
feat(MvPowerSeries/Ideal): kernel of map equals map `C` of kernel |
In this PR, we prove that given a ring homomorphism f, suppose that kernel of f is finitely generated, then kernel of map equals map `C` of kernel. (See `ker_map_of_FG`).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
87/0 |
Mathlib.lean,Mathlib/RingTheory/MvPowerSeries/Ideal.lean |
2 |
6 |
['CoolRmal', 'WenrongZou', 'github-actions'] |
mattrobball assignee:mattrobball |
20-67869 20 days ago |
35-26502 35 days ago |
82-28765 82 days |
| 39567 |
AlexBrodbelt author:AlexBrodbelt |
feat(Mathlib/Data/Finite/Option): option type is finite iff type is finite |
Option type is finite if and only if the type is finite.
This is an intermediate result to proving that if the `GroupWithZero` is (in)finite then the `Units` are (in)finite.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
25/0 |
Mathlib.lean,Mathlib/Data/Finite/Option.lean |
2 |
14 |
['AlexBrodbelt', 'github-actions', 'plp127', 'themathqueen'] |
eric-wieser assignee:eric-wieser |
20-67867 20 days ago |
80-34297 80 days ago |
80-34899 80 days |
| 40006 |
tautschnig author:tautschnig |
feat(Data/ZMod/Basic): idempotents in ZMod (p^d) are exactly {0, 1} |
Add sq_eq_self_iff_eq_zero_or_one: in ZMod (p^d) for prime p and d > 0, x^2 = x iff x = 0 or x = 1.
This generalises eq_zero_or_one_of_sq_eq_self (which requires CancelMonoidWithZero, i.e., no zero divisors) to the prime-power case. ZMod (p^d) has zero divisors for d >= 2, so the mul_left_injective₀ argument used by the existing lemma does not apply. The proof works by lifting to ℕ, using that if gcd(a, b) = 1 and p^d | a*b then p^d divides one of a or b (by Euclid's lemma), then noting that a = x.val and b = x.val - 1 are consecutive naturals and hence coprime.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
56/0 |
Mathlib/Data/ZMod/Basic.lean |
1 |
3 |
['Julian-Kuelshammer', 'github-actions'] |
TwoFX assignee:TwoFX |
20-67866 20 days ago |
70-36988 70 days ago |
70-37671 70 days |
| 40023 |
chenson2018 author:chenson2018 |
chore(AlgebraicTopology): refactor proofs where `grind?` fails |
These are sources of technical debt as now reported in the [weekly linting report](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log/with/544658968). The idea is that a successful grind proof can fail to report the theorems it used via grind?, which means that if these proofs break across toolchains that it becomes significantly harder to repair.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
will-close-soon
|
11/5 |
Mathlib/AlgebraicTopology/SimplexCategory/DeltaZeroIter.lean,Mathlib/AlgebraicTopology/SimplexCategory/GeneratorsRelations/NormalForms.lean,Mathlib/AlgebraicTopology/SimplicialSet/NonDegenerateSimplices.lean,Mathlib/AlgebraicTopology/SimplicialSet/NonDegenerateSimplicesSubcomplex.lean |
4 |
4 |
['chenson2018', 'github-actions', 'grunweg', 'joelriou'] |
robin-carlier assignee:robin-carlier |
20-67865 20 days ago |
70-11332 70 days ago |
70-11320 70 days |
| 41228 |
joelriou author:joelriou |
feat(Algebra/ModuleCat/Differentials/Presheaf): the presheaf of relative differentials |
Given a functor `F : C ⥤ D`, presheaves of commutative rings `S`, `R` and a morphism `φ : S ⟶ F.op ⋙ R`, we show that derivations relative to `φ` are representable by a presheaf of `R`-modules.
This is obtained by reducing to the case of absolute differentials. The construction shall allow to deduce the presheaf version of the cokernel sequence $$f^\star \Omega_{Y/S} ⟶ \Omega_{X/S} ⟶ \Omega_{X/Y} ⟶ 0$$ when `f : X ⟶ Y` and `g : Y ⟶ S` are morphisms of schemes.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
t-category-theory
t-algebra
large-import
label:t-algebra$ |
458/21 |
Mathlib/Algebra/Category/ModuleCat/Differentials/Presheaf.lean |
1 |
1 |
['github-actions'] |
kim-em assignee:kim-em |
20-67860 20 days ago |
37-39674 37 days ago |
37-39662 37 days |
| 41536 |
Mathias-Stout author:Mathias-Stout |
chore(Algebra): make quaternion directory |
We create separate directory for quaternions and move the two existing files into it.
This prepares a follow-up PR proving that quaternions are central simple.
Co-authored-by: Justus Springer <justusspringer@gmx.de>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
file-removed
new-contributor
|
7/7 |
Mathlib.lean,Mathlib/Algebra/DualQuaternion.lean,Mathlib/Algebra/Quaternion/Basic.lean,Mathlib/Algebra/Quaternion/Basis.lean,Mathlib/Analysis/Quaternion.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Equivs.lean,MathlibTest/Quaternion.lean |
7 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
20-64176 20 days ago |
20-64994 20 days ago |
28-24016 28 days |
| 41649 |
xroblot author:xroblot |
feat(FieldTheory/IntermediateField): adjoining a shifted or scaled generator |
Add two lemmas about simple intermediate field extensions:
* `IntermediateField.adjoin_simple_add_algebraMap`: `F⟮x + algebraMap F E y⟯ = F⟮x⟯` for `y` in the base field `F`.
* `IntermediateField.adjoin_simple_mul_algebraMap`: `F⟮x * algebraMap F E y⟯ = F⟮x⟯` for `y` a nonzero element of `F`.
Translating the generator by a base-field element, or scaling it by a nonzero base-field element, leaves the simple extension unchanged.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
21/0 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
20-61390 20 days ago |
26-24535 26 days ago |
26-24523 26 days |
| 40636 |
xroblot author:xroblot |
feat(RingTheory/FractionalIdeal): IsMulTorsionFree instance |
- Adds `FractionalIdeal.isMulTorsionFree_of_le_nonZeroDivisors`: if `S ≤ R⁰` and `[IsMulTorsionFree (Ideal R)]`, then `IsMulTorsionFree (FractionalIdeal S P)`.
- Derives `FractionalIdeal.instIsMulTorsionFree` for the fraction field case (`S = R⁰`).
Also adds a discoverability note in `DedekindDomain/Ideal/Basic.lean` pointing to `Mathlib.Algebra.GroupWithZero.Torsion` for the `IsMulTorsionFree (Ideal A)` instance (hence also `IsMulTorsionFree (FractionalIdeal A⁰ K)`).
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-ring-theory |
44/0 |
Mathlib/RingTheory/DedekindDomain/Ideal/Basic.lean,Mathlib/RingTheory/FractionalIdeal/Operations.lean |
2 |
1 |
['github-actions'] |
nobody |
20-61078 20 days ago |
27-23562 27 days ago |
27-23594 27 days |
| 40864 |
xroblot author:xroblot |
feat(RingTheory/Localization/FractionRing): add IsFractionRing.fixingSubgroup_range_algebraMap |
Adds `IsFractionRing.fixingSubgroup_range_algebraMap`: if `K` and `L` are the fraction fields of `A` and `B` with `A ⊆ B`, then for `G` acting on `B` and on `L`, the fixing subgroup of (the image of) `A` in `B` equals the fixing subgroup of `K` in `L`.
This lemma was split out of #38864, and is used here to golf the proof of `IsGaloisGroup.fixingSubgroup_range_algebraMap`.
|
t-ring-theory |
24/14 |
Mathlib/FieldTheory/Galois/IsGaloisGroup.lean,Mathlib/RingTheory/Localization/FractionRing.lean |
2 |
1 |
['github-actions'] |
nobody |
20-60960 20 days ago |
47-18264 47 days ago |
47-19142 47 days |
| 40301 |
xroblot author:xroblot |
feat(RingTheory/UniqueFactorizationDomain): add emultiplicity characterizations |
Adds characterizations of primality, vanishing, associatedness and equality in `WfDvdMonoid`/`UniqueFactorizationMonoid` in terms of `emultiplicity`:
- `Prime.emultiplicity_self`, `Prime.emultiplicity_prime`
- `WfDvdMonoid.eq_zero_iff_forall_prime_pow_dvd`, `WfDvdMonoid.ne_zero_iff_finiteMultiplicity`
- `UniqueFactorizationMonoid.associated_iff_emultiplicity_eq(')`, `UniqueFactorizationMonoid.eq_iff_emultiplicity_eq`
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-ring-theory |
67/0 |
Mathlib/RingTheory/UniqueFactorizationDomain/Multiplicity.lean |
1 |
1 |
['github-actions'] |
nobody |
20-60560 20 days ago |
27-23661 27 days ago |
35-40631 35 days |
| 40302 |
xroblot author:xroblot |
feat(Data/Nat/Digits): add digitsAppend API lemmas and List.mapIdx_replicate |
Adds some lemmas about `Nat.digitsAppend` and `List.mapIdx_replicate`:
These complete the basic API around `Nat.digitsAppend` (already in Mathlib) that is needed downstream to relate it to `Nat.digits` and to sums indexed via `List.mapIdx`.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-data |
50/0 |
Mathlib/Data/List/Indexes.lean,Mathlib/Data/Nat/Digits/Lemmas.lean |
2 |
1 |
['github-actions'] |
nobody |
20-60535 20 days ago |
60-12642 60 days ago |
60-12800 60 days |
| 40557 |
xroblot author:xroblot |
feat(RingTheory/Ideal): generalize span_singleton_dvd_span_singleton_iff_dvd and emultiplicity_eq_emultiplicity_span |
Move `Ideal.span_singleton_dvd_span_singleton_iff_dvd` from
`Mathlib.RingTheory.DedekindDomain.Ideal.Lemmas` to
`Mathlib.RingTheory.Ideal.Operations`. The result holds for any `CommSemiring` — the `[IsPrincipalIdealRing R]` hypothesis was not needed.
Generalize `Ideal.emultiplicity_eq_emultiplicity_span` from
`[IsDomain R] [IsPrincipalIdealRing R]` to `[CommRing R]`. The proof simplifies considerably: it follows immediately from `emultiplicity_eq_emultiplicity_iff` and the generalized dvd lemma.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-ring-theory |
29/26 |
Mathlib/RingTheory/DedekindDomain/Ideal/Lemmas.lean,Mathlib/RingTheory/Ideal/Operations.lean |
2 |
3 |
['Multramate', 'github-actions', 'xroblot'] |
nobody |
20-60125 20 days ago |
56-6722 56 days ago |
56-6710 56 days |
| 25841 |
mitchell-horner author:mitchell-horner |
feat(Combinatorics/SimpleGraph): prove the Kővári–Sós–Turán theorem |
Prove the Kővári–Sós–Turán theorem (an upper bound on the Zarankiewicz function)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #19865
- [x] depends on: #20738
- [x] depends on: #27602
- [x] depends on: #34633
[](https://gitpod.io/from-referrer/)
---
*This PR continues the work from #20240.*
*Original PR: https://github.com/leanprover-community/mathlib4/pull/20240* |
t-combinatorics |
244/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Extremal/KovariSosTuran.lean,docs/1000.yaml |
3 |
13 |
['SnirBroshi', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'mitchell-horner'] |
kmill assignee:kmill |
20-34095 20 days ago |
20-34653 20 days ago |
58-25666 58 days |
| 41887 |
Ljon4ik4 author:Ljon4ik4 |
feat: lemmas showing properties of ofDerivation added |
Given an `R`-Lie algebra `L` and a commutative `R`-algebra `A`, there is a Lie algebra structure on `(A ⊗[R] L)`.
A derivation of `A` induces a Lie derivation of `(A ⊗[R] L)`, and one obtains a Lie algebra map
```
ofDerivation : Derivation R A A →ₗ⁅R⁆ LieDerivation R (A ⊗[R] L) (A ⊗[R] L)
```
In this PR we add a Lemma showing that `ofDerivation` is in fact `A`-linear, and that the resulting LieDerivation satisfies a Leibniz rule with respect to the `A`-multiplication on `A ⊗[R] L`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
13/0 |
Mathlib/Algebra/Lie/Derivation/BaseChange.lean |
1 |
1 |
['github-actions'] |
nobody |
20-18177 20 days ago |
20-18722 20 days ago |
20-21686 20 days |
| 39307 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/Copy): introduce `UnlabeledCopy` carrier subtype |
Adds `abbrev UnlabeledCopy A B := {B' : B.Subgraph // Nonempty (A ≃g B'.coe)}` and uses it to replace the previous inline filter-set body of `copyCount G H`. Drops the now unused legacy Finset-image bridge `copyCount_eq_card_image_copyToSubgraph`. Adds `uniqueUnlabeledCopyBot` instance so `copyCount_bot` is a one-liner via `Fintype.card_unique`.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
**Step 1/5 of the `Copy` / `InducedCopy` refactor-feat stack.**
This PR isolates the `UnlabeledCopy` type introduction and the count's type-form redefinition from the larger rename/convention work in the rest of the stack. Note that resolving the current clash in naming (`Copy` and `UnlabeledCopy` vs `labelledCopyCount` and `copyCount`) is part of #38745.
|
t-combinatorics |
28/24 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean |
1 |
26 |
['FordUniver', 'SnirBroshi', 'YaelDillies', 'b-mehta', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'mitchell-horner'] |
nobody |
20-14904 20 days ago |
21-13600 21 days ago |
75-33884 75 days |
| 41567 |
kim-em author:kim-em |
doc: fix TFAE list rendering in Rees theorem module docstring |
This PR fixes the module docstring of `Mathlib/RingTheory/Depth/Rees.lean`: the four TFAE items used `·`, which is not a markdown list marker, so they rendered as a single run-on paragraph on doc-gen. Replace them with proper `*` sub-list items, add the missing "and nontrivial" to the first item to match the Lean statement, and drop the unused binder name `Nfin` in `subsingleton_ext_of_exists_isRegular`.
Follow-up to [#26212 (feat(Algebra): the Rees theorem for depth)](https://github.com/leanprover-community/mathlib4/pull/26212), where the reviewer deferred checking the rendered docs to after the merge.
🤖 Prepared with Claude Code
|
t-ring-theory
LLM-generated
|
6/5 |
Mathlib/RingTheory/Depth/Rees.lean |
1 |
1 |
['github-actions'] |
nobody |
20-13346 20 days ago |
20-13402 20 days ago |
20-13390 20 days |
| 41570 |
kim-em author:kim-em |
doc: fix and add docstrings in RingTheory/Invariant/Galois |
This PR fixes the docstring of `Ideal.Quotient.normal`, which was copy-pasted from `Ideal.Quotient.exists_algHom_fixedPoint_quotient_under` and did not describe the statement `Normal (A ⧸ P) (B ⧸ Q)`, and add docstrings to `Ideal.IsFractionRing.normal` and `Ideal.IsFractionRing.finite_of_isInvariant`, matching the phrasing of the sibling results in `RingTheory/Invariant/Basic.lean`.
Follow-up to [#40247 (feat(RingTheory/Invariant/Basic): generalize `Ideal.Quotient.normal` to `IsFractionRing`)](https://github.com/leanprover-community/mathlib4/pull/40247).
🤖 Prepared with Claude Code
|
t-ring-theory
LLM-generated
|
5/3 |
Mathlib/RingTheory/Invariant/Galois.lean |
1 |
1 |
['github-actions'] |
nobody |
20-13345 20 days ago |
20-13372 20 days ago |
20-13360 20 days |
| 41583 |
kim-em author:kim-em |
chore: move simple_obj into Functor namespace, golf proofs, tidy docstring |
This PR moves `CategoryTheory.simple_obj` and `CategoryTheory.simple_obj_iff` into the `Functor` namespace (matching their sibling `Functor.simple_of_simple_obj` and enabling dot notation), golf `Functor.simple_obj` and the forward direction of `isSimpleModule_iff_eq_zero_or_injective` via the existing `LinearMap.injective_or_eq_zero`, remove unused `variable` binders in `RingTheory/SimpleRing/DivisionRing.lean`, and fix inverted heading levels and an "an unique" typo in that file's module docstring. The one call site of the renamed lemmas is updated; no deprecated aliases are added since the declarations merged a week ago.
Follow-up to [#41233 (feat(SimpleRing/DivisionRing): simple module is preserved by ModuleCat equivs)](https://github.com/leanprover-community/mathlib4/pull/41233).
🤖 Prepared with Claude Code
|
LLM-generated |
16/19 |
Mathlib/CategoryTheory/Simple.lean,Mathlib/RingTheory/SimpleRing/DivisionRing.lean |
2 |
1 |
['github-actions'] |
nobody |
20-12849 20 days ago |
20-12849 20 days ago |
20-12837 20 days |
| 41578 |
kim-em author:kim-em |
chore: weaken hypotheses of Algebra.IsUnramifiedIn.ramificationIdx_eq_one |
This PR drops the unused `[IsDomain R] [Module.Finite ℤ R] [CharZero R] [Algebra.IsIntegral R S]` hypotheses from `Algebra.IsUnramifiedIn.ramificationIdx_eq_one` by proving via `Ideal.ramificationIdx_eq_one` directly rather than through `Ideal.ramificationIdx_eq_one_iff`, and tidy the docstrings in `Mathlib/RingTheory/Unramified/Locus.lean` (fix a stray space before a period, mention `Algebra.IsUnramifiedIn` in the module docstring, add a missing blank line).
Follow-up to [#40886 (feat: add Algebra.IsUnramifiedIn)](https://github.com/leanprover-community/mathlib4/pull/40886).
🤖 Prepared with Claude Code
|
LLM-generated |
8/6 |
Mathlib/NumberTheory/RamificationInertia/Unramified.lean,Mathlib/RingTheory/Unramified/Locus.lean |
2 |
1 |
['github-actions'] |
nobody |
20-12718 20 days ago |
20-12718 20 days ago |
20-12706 20 days |
| 41030 |
tb65536 author:tb65536 |
refactor(GroupTheory/Commensurable): add and generalize API |
This PR makes the following changes to `GroupTheory/Commensurable.lean`:
- Use `IsFiniteRelIndex` instead of `relIndex ≠ 0` to allow use of `IsFiniteRelIndex` API.
- Add API lemmas for `bot`, `top`, `inf`, `map`, `comap`, and `smul`.
- Deprecate the existing conjugation API lemmas as superseded by the new `smul` API lemmas.
- Define `commensurator` directly via `MulAut.conj` rather than going through `ConjAct`.
- Deprecate the auxiliary `commensurator'`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
130/55 |
Mathlib/GroupTheory/Commensurable.lean,Mathlib/GroupTheory/Index.lean,Mathlib/NumberTheory/ModularForms/ArithmeticSubgroups.lean,Mathlib/NumberTheory/ModularForms/CongruenceSubgroups.lean,Mathlib/NumberTheory/ModularForms/Cusps.lean,Mathlib/Topology/Algebra/Group/DiscontinuousSubgroup.lean,Mathlib/Topology/Algebra/IsUniformGroup/DiscreteSubgroup.lean |
7 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
20-11189 20 days ago |
20-13538 20 days ago |
42-83709 42 days |
| 41374 |
SnirBroshi author:SnirBroshi |
chore(SimpleGraph/Girth): namespace `egirth_le_length` under `IsCycle` |
For dot notation and because this is about cycles. This matches the circuit version.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
10/6 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
20-11153 20 days ago |
20-12343 20 days ago |
33-48335 33 days |
| 41432 |
SnirBroshi author:SnirBroshi |
chore(Combinatorics/SimpleGraph/Paths): spell `getVert` injectivity lemmas using `Set` intervals |
e.g. replace `{i | i ≤ p.length}` with `Iic p.length` in `IsPath.getVert_injOn`, which is the canonical spelling.
Proofs using `Set.mem_setOf`/`Set.mem_setOf_eq` had to be fixed, and got golfed along the way.
I also rewrote the proof of `IsPath.getVert_injOn` since it seemed too long.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
29/60 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
20-11077 20 days ago |
20-12406 20 days ago |
31-42856 31 days |
| 41380 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Girth): relate `girth` and `egirth` |
Also add `le_girth` to match `le_egirth`, which is the only `egirth` lemma that's missing a `girth` counterpart.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
38/4 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
20-10733 20 days ago |
20-11972 20 days ago |
33-31499 33 days |
| 36442 |
SnirBroshi author:SnirBroshi |
feat(Data/Sym/Sym2/Card): cardinality theorems about `Sym2 α` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
168/0 |
Mathlib.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/Sym/Sym2.lean,Mathlib/Data/Sym/Sym2/Card.lean |
4 |
33 |
['SnirBroshi', 'eric-wieser', 'github-actions', 'joneugster', 'mathlib-merge-conflicts', 'themathqueen'] |
eric-wieser assignee:eric-wieser |
20-7410 20 days ago |
20-11318 20 days ago |
81-72517 81 days |
| 41829 |
felixpernegger author:felixpernegger |
perf: explicitly specify free universes in `ModuleCat` |
Like #40964, but for `ModuleCat`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
197/193 |
Mathlib/Algebra/Category/AlgCat/Symmetric.lean,Mathlib/Algebra/Category/CoalgCat/Basic.lean,Mathlib/Algebra/Category/CoalgCat/ComonEquivalence.lean,Mathlib/Algebra/Category/CoalgCat/Monoidal.lean,Mathlib/Algebra/Category/FGModuleCat/Basic.lean,Mathlib/Algebra/Category/Grp/ZModuleEquivalence.lean,Mathlib/Algebra/Category/ModuleCat/Adjunctions.lean,Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Differentials/Basic.lean,Mathlib/Algebra/Category/ModuleCat/FilteredColimits.lean,Mathlib/Algebra/Category/ModuleCat/Images.lean,Mathlib/Algebra/Category/ModuleCat/Kernels.lean,Mathlib/Algebra/Category/ModuleCat/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Localization.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Adjunction.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Closed.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Symmetric.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/ColimitFunctor.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Monoidal.lean,Mathlib/Algebra/Category/ModuleCat/Subobject.lean,Mathlib/Algebra/Homology/ShortComplex/ModuleCat.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/AlgebraicGeometry/StructureSheaf.lean,Mathlib/CategoryTheory/Abelian/Ext.lean,Mathlib/CategoryTheory/Abelian/GrothendieckCategory/ModuleEmbedding/GabrielPopescu.lean,Mathlib/CategoryTheory/Limits/ConcreteCategory/WithAlgebraicStructures.lean,Mathlib/CategoryTheory/Linear/Yoneda.lean,Mathlib/Condensed/Discrete/Module.lean,Mathlib/Condensed/Light/Explicit.lean,Mathlib/Condensed/Light/Small.lean,Mathlib/LinearAlgebra/QuadraticForm/QuadraticModuleCat.lean,Mathlib/LinearAlgebra/QuadraticForm/QuadraticModuleCat/Monoidal.lean,Mathlib/LinearAlgebra/QuadraticForm/QuadraticModuleCat/Symmetric.lean,Mathlib/RepresentationTheory/Coinvariants.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/Basic.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/Functoriality.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/LongExactSequence.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/Basic.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/Functoriality.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/LongExactSequence.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/LowDegree.lean,Mathlib/RepresentationTheory/Homological/Resolution.lean,Mathlib/RepresentationTheory/Homological/TateCohomology/Basic.lean,Mathlib/RepresentationTheory/Invariants.lean,Mathlib/RepresentationTheory/Rep/Basic.lean,Mathlib/RepresentationTheory/Rep/Iso.lean,Mathlib/RingTheory/Depth/Rees.lean,Mathlib/RingTheory/Flat/CategoryTheory.lean,Mathlib/RingTheory/Regular/Category.lean |
51 |
10 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors'] |
nobody |
20-1964 20 days ago |
21-82080 21 days ago |
21-83037 21 days |
| 41905 |
wwylele author:wwylele |
feat(FieldTheory): relrank lemma about sup |
The main lemma I want is `(A ⊔ C).relrank (B ⊔ C) ≤ A.relrank B`. Added some trivial lemma along the way.
---
AI usage disclosure: this was originally drafted by Aristotle, then cleaned up by me.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
95/0 |
Mathlib/FieldTheory/Relrank.lean |
1 |
2 |
['copilot-pull-request-reviewer', 'github-actions'] |
nobody |
19-75421 19 days ago |
19-79253 19 days ago |
19-79241 19 days |
| 40410 |
seewoo5 author:seewoo5 |
feat(DihedralGroup): center of $D_n$ for even $n\ne 2$ |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
For even $n \ne 2$, center of $D_n$ is generated by the rotation `r (n/2)`. This is a companion of `center_eq_bot_of_odd_ne_one` proved in #33971. Initial code & further golfing is done by Claude Opus 4.5.
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
t-group-theory
label:t-algebra$ |
41/0 |
Mathlib/GroupTheory/SpecificGroups/Dihedral.lean |
1 |
11 |
['SnirBroshi', 'github-actions', 'plp127', 'seewoo5'] |
mattrobball assignee:mattrobball |
19-67874 19 days ago |
58-50476 58 days ago |
59-26081 59 days |
| 40782 |
tb65536 author:tb65536 |
feat(Combinatorics/SimpleGraph/Coloring/EdgeLabeling): add predicates for monochromatic subsets |
This PR adds predicates for monochromatic subsets, in preparation for Ramsey theory.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
143/0 |
Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeLabeling.lean |
1 |
26 |
['SnirBroshi', 'YaelDillies', 'b-mehta', 'github-actions', 'tb65536'] |
b-mehta assignee:b-mehta |
19-67873 19 days ago |
33-80671 33 days ago |
46-39499 46 days |
| 41299 |
JovanGerb author:JovanGerb |
chore(DomAct): clean up `DomMulAct`/`DomAddAct` instances |
This PR cleans up the `DomMulAct`/`DomAddAct` instances using `inferInstanceAs`.
Instead having the `MyClass Mᵐᵒᵖ` instance imply the `MyClass Mᵈᵐᵃ` instance, we use `MyClass M` as the hypothesis. For this to work, some instances need to be moved from the group file to the ring file, so that the required instances are available.
Additionally, `@[to_additive]` is now only used in the group instances and not the ring instances.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
large-import
|
21/16 |
Mathlib/Algebra/Module/Hom.lean,Mathlib/Algebra/Module/LinearMap/Basic.lean,Mathlib/Algebra/Ring/Opposite.lean,Mathlib/GroupTheory/GroupAction/DomAct/Basic.lean |
4 |
1 |
['github-actions'] |
tb65536 assignee:tb65536 |
19-67869 19 days ago |
36-13294 36 days ago |
36-13557 36 days |
| 38979 |
ldct author:ldct |
feat(EReal): simplify nat + ⊤ |
Alternative version of https://github.com/leanprover-community/mathlib4/pull/38975
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
28/2 |
Mathlib/Data/EReal/Basic.lean,Mathlib/Data/EReal/Operations.lean,MathlibTest/EReal.lean |
3 |
7 |
['SnirBroshi', 'eric-wieser', 'github-actions', 'ldct', 'leanprover-radar', 'plp127'] |
eric-wieser assignee:eric-wieser |
19-61597 19 days ago |
93-19053 93 days ago |
93-19171 93 days |
| 41914 |
Qinghev author:Qinghev |
feat(Analysis/Normed): bound finite convex combinations |
---
codex辅助我完成了编写和校验。 |
t-analysis
LLM-generated
new-contributor
|
8/0 |
Mathlib/Analysis/Normed/Module/Convex.lean |
1 |
3 |
['Qinghev', 'github-actions'] |
nobody |
19-58451 19 days ago |
19-59710 19 days ago |
19-59698 19 days |
| 41909 |
wwylele author:wwylele |
feat(FieldTheory): field equivalences for bot subfield |
Make it easier to use than the existing Subfield equality lemma.
---
~~The ZMod version `Subfield.botEquivZMod_symm_apply` is missing because the statement
`(Subfield.botEquivZMod K p).symm x = algebraMap (ZMod p) (⊥ : Subfield K) x` doesn't type-check, which is missing the instance `Algebra (ZMod p) (⊥ : Subfield K)`, which is because [ZMod.algebra](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Algebra/ZMod.html#ZMod.algebra) is a `def`~~
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
44/3 |
Mathlib/FieldTheory/PrimeField.lean |
1 |
4 |
['copilot-pull-request-reviewer', 'github-actions', 'plp127', 'wwylele'] |
nobody |
19-57393 19 days ago |
19-66869 19 days ago |
19-67378 19 days |
| 39420 |
mbkybky author:mbkybky |
feat(RingTheory/LocalProperties): `Module.Invertible` is a local property |
Let `M` be a finite `R`-module. We show that `M` is invertible if `Mₘ` is invertible for any maximal ideal `m` of `R`.
- [x] depends on: #39109
- [x] depends on: #39412
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
101/0 |
Mathlib.lean,Mathlib/RingTheory/LocalProperties/Invertible.lean |
2 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
19-55887 19 days ago |
19-56444 19 days ago |
28-29639 28 days |
| 40941 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add stabilizers of vectors in representations |
Add Representation.stabilizer: the subgroup fixing a vector in a representation.
Provide basic lemmas for zero vectors, scalar multiples, sums, intertwining maps, and conjugations, as a first step toward smooth representations. Make representation-theoretic arguments use this specialized API instead of repeatedly unfolding the fixed-vector condition or routing through the more general MulAction stabilizer API. |
t-algebra
new-contributor
label:t-algebra$ |
68/0 |
Mathlib.lean,Mathlib/RepresentationTheory/Stabilizer.lean |
2 |
70 |
['JX-Mo', 'Whysoserioushah', 'github-actions', 'tb65536'] |
nobody |
19-54423 19 days ago |
21-13941 21 days ago |
42-26974 42 days |
| 41911 |
kedlaya author:kedlaya |
feat(FieldTheory): implement Artin-Schreier extensions, Artin-Schreier theorem |
Implement the Artin-Schreier description of cyclic degree-p extensions of fields of characteristic p, and the related theorem of Artin-Schreier that a field with a finite algebraically closed extension is either algebraically closed or real closed.
|
t-algebra
new-contributor
label:t-algebra$ |
486/0 |
Mathlib.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/FieldTheory/ArtinSchreierExtension.lean,Mathlib/FieldTheory/IsRealClosed/ArtinSchreier.lean |
4 |
11 |
['SnirBroshi', 'github-actions', 'jcommelin', 'kedlaya'] |
nobody |
19-52327 19 days ago |
19-61177 19 days ago |
19-62506 19 days |
| 41890 |
Ljon4ik4 author:Ljon4ik4 |
feat: semidirect product of Lie algebras - adding simp lemmas for toProd.symm and toProdl.symm |
As an `R`-module the semidirect product of two Lie algebras ` K ⋊⁅ψ⁆ L` is isomorphic to ` K × L`.
The simp lemmas for the reverse direction of this isomorphisms were missing and are added in this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
5/1 |
Mathlib/Algebra/Lie/SemiDirect.lean |
1 |
2 |
['github-actions'] |
nobody |
19-38635 19 days ago |
20-21224 20 days ago |
20-21212 20 days |
| 41180 |
xroblot author:xroblot |
feat(NumberTheory/NumberField): congruence for the norm of an unramified prime |
Add `torsionOrder_dvd_absNorm_sub_one'`: if a prime `P` of `𝓞 K` is unramified over `ℤ` and the rational prime below it has norm greater than `2`, then `torsionOrder K` divides `absNorm P - 1`. This is a variant of `torsionOrder_dvd_absNorm_sub_one` that replaces the coprimality hypothesis by unramifiedness.
Also add the helper `pow_torsionOrder_eq_one`.
Co-authored-by: Ashleigh Ratcliffe
Co-authored-by: Bryan Hu
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
t-algebra
label:t-algebra$ |
84/5 |
Mathlib/NumberTheory/NumberField/Ideal/Basic.lean,Mathlib/NumberTheory/NumberField/Units/Basic.lean |
2 |
19 |
['CBirkbeck', 'github-actions', 'tb65536', 'xroblot'] |
tb65536 assignee:tb65536 |
19-37634 19 days ago |
19-63919 19 days ago |
36-80734 36 days |
| 41839 |
CoolRmal author:CoolRmal |
feat(Topology/Connected): connected subsets of finite one-dimensional Hausdorff measure |
This PR proves some properties of preconnected subsets of an extended metric space in terms of their Hausdorff measure.
- The extended diameter of a preconnected set is at most its one-dimensional Hausdorff measure
- A preconnected set with finite `d`-dimensional Hausdorff measure for some `d < 1` is a subsingleton, so any set with finite such measure is totally disconnected
- A preconnected set with finite one-dimensional Hausdorff measure is totally bounded.
The main tool is that the distance from a fixed base point is `1`-Lipschitz (we define it by `x => (edist a x).toReal` and `ENNReal.toReal` is necessary because `ℝ≥0∞` is not an EMetric space and blocks me from using `LipschitzOnWith`, this is also the reason why I proved some weird lemmas like `isClopen_setOf_edist_ne_top` and `IsPreconnected.edist_ne_top`), so it does not increase Hausdorff measures, and the image of a preconnected set under it is an interval whose one-dimensional Hausdorff measure is its length. Comparing the two turns distances inside the set into lower bounds for its measure.
Some of these lemmas probably should belong to a different space. Feel free to give me some suggestions on this.
In the future, I would also like to use results in this PR to prove that a preconnected, compact subset with finite one-dimensional Hausdorff measure is path-connected, and this is included in TODO.
Created with the help of Claude Code, carefully reviewed and golfed by myself.
|
t-topology
LLM-generated
|
179/0 |
Mathlib.lean,Mathlib/Topology/Connected/HausdorffMeasure.lean,Mathlib/Topology/EMetricSpace/Defs.lean |
3 |
3 |
['CoolRmal', 'github-actions', 'plp127'] |
nobody |
19-35734 19 days ago |
19-37233 19 days ago |
21-71675 21 days |
| 39219 |
WenrongZou author:WenrongZou |
feat(FieldTheory/Finite): add variant theorems for `expand_card` |
Add `MvPolynomial, MvPowerSeries, PowerSeries` version of `FiniteField.expand_card`, which is only for polynomial.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
37/3 |
Mathlib/FieldTheory/Finite/Basic.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/FiniteField.lean,Mathlib/RingTheory/MvPolynomial/Expand.lean,Mathlib/RingTheory/MvPowerSeries/Expand.lean,Mathlib/RingTheory/PowerSeries/Expand.lean |
5 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
kim-em assignee:kim-em |
19-32451 19 days ago |
19-33198 19 days ago |
83-36967 83 days |
| 41920 |
junjihashimoto author:junjihashimoto |
feat(Analysis/CliffordAlgebra): the pseudoscalar of Cl(n,0) and its complex structure |
We study the Clifford algebra of Euclidean `n`-space (the quadratic form `x ↦ ⟪x, x⟫_ℝ` on `EuclideanSpace ℝ (Fin n)`). The pseudoscalar `ω = e₀ ⋯ eₙ₋₁` satisfies
* `ω * ω = (-1) ^ (n.choose 2)` (`pseudoscalar_mul_pseudoscalar'`),
* `γᵢ * ω = (-1) ^ (n - 1) • (ω * γᵢ)` (`γ_mul_pseudoscalar`),
so it is central for odd `n`, and a square root of `-1` iff `n ≡ 2, 3 [MOD 4]`. In that case left multiplication by `ω` is a complex structure: we provide a scoped `Module ℂ` instance (via `Complex.liftAux` and `Module.compHom`; no commutation is needed for a module structure, which covers the non-central case `n ≡ 2 [MOD 4]`), and for `n ≡ 3 [MOD 4]` an `Algebra ℂ` structure as a non-instance def.
The sign computations are done by moving a generator through a product of distinct generators (`γ_mul_prod`, `γ_mul_prod_mem`, `prod_sq`), with no case analysis on `n`.
In a follow-up PR this makes the Clifford–Fourier transform (Ebling–Scheuermann) an instance of the ordinary vector-valued Fourier transform, giving Plancherel's theorem and the inversion formula.
- [ ] depends on: (nothing)
|
t-analysis
new-contributor
|
303/0 |
Mathlib.lean,Mathlib/Analysis/CliffordAlgebra/Euclidean.lean |
2 |
2 |
['github-actions'] |
nobody |
19-28377 19 days ago |
19-28928 19 days ago |
19-29416 19 days |
| 41892 |
Ljon4ik4 author:Ljon4ik4 |
feat: mapOfCompatibleSMul is the same map independently of S |
The `mapOfCompatibleSMul : M ⊗[A] N →ₗ[S] M ⊗[R] N` is the same map independently of `S`. This PR adds two lemmas asserting that (one for the underlying AddHom, one for the kernels).
I am not quite sure whether the second one is in the optimal shape: It was the shape useful to me, but maybe there is some better way to phrase it or it should be omitted completely (since it follows from the first one...).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
10/1 |
Mathlib/LinearAlgebra/TensorProduct/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
19-21299 19 days ago |
20-19499 20 days ago |
20-19487 20 days |
| 40368 |
Sanghyeok0 author:Sanghyeok0 |
feat: add confluence predicates for relations |
This PR adds a minimal relation-level API for confluence-style properties:
* `Relation.Diamond`
* `Relation.Confluent`
* `Relation.ChurchRosser`
It also adds the basic API connecting these predicates:
* `Relation.ReflTransGen.to_eqvGen`
* `Relation.Join.to_eqvGen`
* `Relation.ChurchRosser.confluent`
* `Relation.Confluent.churchRosser`
The main downstream application is the polynomial-reduction development in
#41475. There, polynomial reduction is treated as an ordinary relation on
`MvPolynomial`, and these predicates are used to formulate confluence and the
Church--Rosser property.
A more general rewriting API exists in CSLib. This PR does not attempt to
upstream that API wholesale; its scope is intentionally limited to the
declarations needed by the downstream polynomial application.
The earlier version of this PR also introduced
`Relation.StronglyConfluent` and additional equivalence packaging. Those
declarations have been removed to keep this PR small and application-driven.
Reference: Becker, Weispfenning, and Kredel,
*Gröbner Bases: A Computational Approach to Commutative Algebra*.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic
new-contributor
|
79/5 |
Mathlib/Logic/Relation.lean |
1 |
8 |
['Sanghyeok0', 'chenson2018', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
19-17684 19 days ago |
19-25758 19 days ago |
42-37537 42 days |
| 41904 |
rshlyakh author:rshlyakh |
feat(RingTheory/KrullDimension): add Krull dimension preservation under injective integral extensions |
This proves that an injective integral homomorphism of commutative rings
preserves Krull dimension, based on the `Algebra.HasGoingUp` infrastructure from #40911. It includes:
- `RingHom.IsIntegral.ringKrullDim_eq_of_injective`: injective integral homomorphisms of
commutative rings preserve Krull dimension.
- `RingHom.IsIntegral.ringKrullDim_quotient_ker_eq`: for an integral extension `f : A →+* B`,
the Krull dimension of `B` is equal to the Krull dimension of `A ⧸ RingHom.ker f`.
- [x] depends on: #40911
- [x] depends on: #41058
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
|
77/13 |
Mathlib.lean,Mathlib/RingTheory/Ideal/HasGoingUp.lean,Mathlib/RingTheory/KrullDimension/Integral.lean |
3 |
13 |
['github-actions', 'mathlib-dependent-issues', 'rshlyakh', 'vlad902'] |
nobody |
19-13218 19 days ago |
19-14305 19 days ago |
19-48556 19 days |
| 41206 |
Ljon4ik4 author:Ljon4ik4 |
feat: strict Lie-Rinehart ideals and Quotients by them |
In this PR strict ideals in the context of Lie-Rinehart algebras are defined and it is shown that quotients by them are again Lie-Rinehart algebras.
## Context on Lie-Rinehart algebras
A Lie-Rinehart algebra is given by a couple of an `R`-algebra `A` and an `R`-Lie-Algebra `L` acting on each other and satisfying certain compatibility conditions. The most important example of Lie-Rinehart algebras in geometry is given by `A`=smooth functions on a smooth manifold, and `L`= vector fields on the manifold. Many important geometric constructions (differential forms, Cartan calculus) are defined naturally in terms of Lie-Rinehart algebras.
## Relevance of the construction
This construction of quotients by ideals will be important to define the Basechange of Lie-Rineahart algebras, which in turn is necessary to define 'comorphisms'. Comorphisms are the right notion of morphism to do geometry (e.g. a smooth map between two manifolds corresponds to a comorphism of their associated Lie-Rinehart algebras).
## Strictness
The ideals here are called strict, because it is assumed that `A` remains untouched and one only considers a subobject of `L`. There seems to be constructions for non-strict ideals, but the definitions are more complicated:
https://www.uni-math.gwdg.de/mjotz/JotzLean18c.pdf
https://arxiv.org/pdf/1706.07084
## Changes made
The files `StrictIdeal.lean` and `Quotient.lean` are new, containing the definition of the ideals and the fact that quotients are again Lie-Rinehart algebras. The `Subalgebra.lean` was mildly changed, since it seemed strange to have `comap` and `ker` without having `map` and `range`.
## Disclosure of AI use
All code is hand-written, I used claude interpret debug messages and search for lemmas.
I think most notably the following patterns were proposed by claude:
* `mul_smul := by rintro r₁ r₂ ⟨x⟩; exact congrArg mk (mul_smul r₁ r₂ x)` to show that things are well-defined on the quotient.
* `change f.toLinearMap' ⁅x, y⁆ ∈ s₂` in the proof in `comap`. (I had a simp there, which had as a result `f.toLinearMap' ⁅x, y⁆ ∈ s₂`, but somehow the subsequent steps did not work then)
## Questions open
* I am not sure if strict is a good prefix, and am happy to change it to something else.
(Also, one could even argue that the subalgebras, as defined currently, should be called strict, too...)
* In the definition of `mk'` the `toFun` field seems obsolete to me, but somehow if I remove it I get an error in one of the lemmas after it.
* I am not sure I fully understand the 'per-definition' expose rules. When I first committed I got some errors so I made two defs exposed, but I am not sure that is the correct way to go.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
442/0 |
Mathlib.lean,Mathlib/Algebra/LieRinehartAlgebra/Quotient.lean,Mathlib/Algebra/LieRinehartAlgebra/StrictIdeal.lean,Mathlib/Algebra/LieRinehartAlgebra/Subalgebra.lean |
4 |
1 |
['github-actions'] |
nobody |
19-8632 19 days ago |
19-9171 19 days ago |
38-3564 38 days |
| 41907 |
Rob23oba author:Rob23oba |
feat: make `NegZeroClass` and `InvOneClass` mixins |
Most of the changes just add `[Zero α] [Neg α]` or `[One α] [Inv α]`, except:
- The change itself to `InvOneClass` / `NegZeroClass`
- Generalizing `neg_eq_zero` (and related theorems) to `InvolutiveNeg` + `NegZeroClass` and deprecating `EReal.neg_eq_zero_iff` / `ENNReal.inv_eq_zero_iff` / `SignType.neg_eq_zero_iff` which are no longer necessary
- Replacing occurrences of `@inv_one ty _` with `inv_one (G := ty)`
- Removing `one` and `inv` in some instance declarations of the form `:= { one, inv with inv_one := ... }`
- `mabs_sup_div_sup_le_mabs`, `mabs_inf_div_inf_le_mabs` and `tendsto_zpow_nhdsNE_zero_cobounded` needed adaptations; not sure why, something to do with unification?
- handling `InvOneClass` specially in `DomMulAct`
- replacing `neg_apply` in ``
- being more specific (i.e. `inv_one (G := F)` instead of `inv_one`) in the proof of `RatFunc.single_zpow`
- adding an `rw` in `differentIdeal_ne_bot` due to leanprover/lean4#14447
- replacing `ArithmeticFunction.neg_apply` with an `IsNegApply` instance
- adapting meta code by adding more implicit arguments (in the form of `none` arguments to `mkAppOptM`)
Zulip discussion at [#mathlib4 > Having both `NegZeroClass` and `InvolutiveNeg`](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Having.20both.20.60NegZeroClass.60.20and.20.60InvolutiveNeg.60/with/611441611)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
100/71 |
Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Group/EvenFunction.lean,Mathlib/Algebra/Group/Finsupp.lean,Mathlib/Algebra/Group/Hom/Basic.lean,Mathlib/Algebra/Group/InjSurj.lean,Mathlib/Algebra/Group/Pi/Basic.lean,Mathlib/Algebra/Group/WithOne/Defs.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/Algebra/Order/Group/Unbundled/Abs.lean,Mathlib/Algebra/QuadraticAlgebra/Defs.lean,Mathlib/Algebra/Ring/Periodic.lean,Mathlib/Algebra/TrivSqZeroExt/Basic.lean,Mathlib/Analysis/Normed/Field/Lemmas.lean,Mathlib/Data/ENNReal/Holder.lean,Mathlib/Data/ENNReal/Inv.lean,Mathlib/Data/EReal/Operations.lean,Mathlib/Data/FunLike/Group.lean,Mathlib/Data/Matrix/Basis.lean,Mathlib/Data/Matrix/Diagonal.lean,Mathlib/Data/Sign/Defs.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/GroupTheory/GroupAction/DomAct/Basic.lean,Mathlib/LinearAlgebra/Matrix/Block.lean,Mathlib/LinearAlgebra/Matrix/NonsingularInverse.lean,Mathlib/MeasureTheory/VectorMeasure/Basic.lean,Mathlib/NumberTheory/ArithmeticFunction/Defs.lean,Mathlib/Order/Filter/Germ/Basic.lean,Mathlib/RingTheory/DedekindDomain/Different.lean,Mathlib/RingTheory/HahnSeries/Addition.lean,Mathlib/RingTheory/HahnSeries/Cardinal.lean,Mathlib/RingTheory/LaurentSeries.lean,Mathlib/Tactic/Abel.lean,Mathlib/Tactic/Linarith/Verification.lean,Mathlib/Topology/Algebra/SeparationQuotient/Basic.lean,Mathlib/Topology/ContinuousMap/ContinuousMapZero.lean |
36 |
1 |
['github-actions'] |
nobody |
19-334 19 days ago |
19-3131 19 days ago |
19-5943 19 days |
| 41786 |
Nicola9Falciola author:Nicola9Falciola |
feat(LinearAlgebra/Matrix/GeneralLinearGroup/Defs): add the proof of the range of toGL to be the ker of the determinant and the induced equivalence |
Add a lemma proving that the `toGL.range ` is equal to `det.ker` and the induced equivalence between `SL` and `det.ker` .
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
13/0 |
Mathlib/LinearAlgebra/Matrix/GeneralLinearGroup/Defs.lean |
1 |
2 |
['github-actions'] |
nobody |
19-169 19 days ago |
22-43926 22 days ago |
22-46373 22 days |
| 41934 |
NickKobs author:NickKobs |
feat(Order/Nucleus): a nucleus on a Boolean algebra is closed |
Adds `Mathlib/Order/Nucleus/Boolean.lean` — the Boolean specialization of the nucleus API:
```lean
theorem Nucleus.apply_eq_sup_apply_bot [BooleanAlgebra X] (n : Nucleus X) (a : X) :
n a = a ⊔ n ⊥
theorem Nucleus.isClosed_of_booleanAlgebra [BooleanAlgebra X] (n : Nucleus X) :
⇑n = fun a => a ⊔ n ⊥
theorem Nucleus.eq_of_apply_bot_eq [BooleanAlgebra X] {m n : Nucleus X} (h : m ⊥ = n ⊥) :
m = n
```
**Why.** `Mathlib.Order.Nucleus` provides the frame / Heyting-algebra structure of `Nucleus X`, the closure-operator view (`toClosureOperator`), and the pointwise `le_apply` / `idempotent` / `map_inf` API, but no Boolean specialization. On a Boolean algebra every nucleus is *closed* — completely determined by its value at `⊥` — which is the pointwise algebraic core of the classical fact that the assembly `N(L)` is Boolean iff `L` is (Beazer–Macnab; Simmons; Johnstone, *Stone Spaces*, II.2). It is the natural companion to the existing frame structure and a common building block in point-free topology.
**Proof.** `n a = n a ⊓ (a ⊔ aᶜ) = (n a ⊓ a) ⊔ (n a ⊓ aᶜ)`; the left join-and is `a` (inflationarity), the right is `≤ n a ⊓ n aᶜ = n (a ⊓ aᶜ) = n ⊥` (inflationarity of `aᶜ` + `map_inf`). The reverse inequality is inflationarity plus monotonicity applied to `⊥ ≤ a`. No completeness is needed — the statement is pointwise, so `[BooleanAlgebra X]` (not a complete Boolean algebra) suffices.
**References.**
* R. Beazer, D. S. Macnab, *Modal extensions of Heyting algebras*.
* H. Simmons, *A framework for topology*, Logic Colloquium '77.
* P. T. Johnstone, *Stone Spaces*, CUP (1982), II.2.
**Provenance.** The theorem was first mechanized (Mathlib-free, over a finite Boolean frame) in the BETTI/Araksha refusal-algebra work; this PR is the generalization to an arbitrary `BooleanAlgebra` against Mathlib's own `Nucleus` API. The result is classical open mathematics, cited above. An earlier revision of the file was compiled clean against master `c81c5cbb` (Lean `v4.33.0-rc1`); this revision adapts the header to the module system (`module` / `public import` / `@[expose] public section`).
|
t-order
new-contributor
LLM-generated
|
71/0 |
Mathlib.lean,Mathlib/Order/Nucleus/Boolean.lean |
2 |
5 |
['felixpernegger', 'github-actions'] |
nobody |
18-67731 18 days ago |
18-81474 18 days ago |
18-81462 18 days |
| 41946 |
Hilbert-beinghappy author:Hilbert-beinghappy |
feat(SetTheory/Descriptive/Tree): add infinite branches and bodies |
Motivation
The existing `tree A` API models trees as prefix-closed sets of finite
lists, together with some basic node operations (`take`, `subAt`,
`pullSub`). It had no notion of an infinite branch through such a
tree. Infinite branches and their collection, the body of a tree, are
basic vocabulary in descriptive set theory (e.g. to state that a tree
is well-founded iff its body is empty, or to talk about closed subsets
of Baire space as bodies of trees), so this is a natural extension of
the file.
Changes
* `initialSegment x n` is the list of the first `n` values of an
infinite sequence `x : ℕ → A`, with lemmas relating its length and
its behaviour when passing from `n` to `n + 1`.
* `IsBranch T x` says that `x : ℕ → A` is an infinite branch of `T`:
every finite initial segment of `x` lies in `T`.
* `body T` is the set of infinite branches of `T`, defined via
`IsBranch`.
* The auxiliary lemmas `nil_mem_of_isBranch` (a branch forces the root
`[]` to lie in `T`) and `body_mono` (`body` is monotone in the tree,
tagged `@[gcongr]`) round out the basic API.
Scope
This PR intentionally does not add closedness of `body T` (which
would require `A` to carry the discrete topology, so that `body T` is
closed in the product topology on `ℕ → A`), well-foundedness of trees
(which needs well-founded relations and descending chains), or rank
(which needs ordinal-valued rank API). These are left for follow-up
PRs, since each pulls in its own dependencies and deserves separate
review.
Verification
* `lake build Mathlib.SetTheory.Descriptive.Tree`
* `lake exe lint-style Mathlib.SetTheory.Descriptive.Tree`
* `lake build Mathlib`
AI use
I used Codex to help select this item from the
backlog, adapt the definitions to the existing `tree A` API and to the
`Descriptive.Tree` namespace and current module system (e.g. adding
the `public import` for `Mathlib.Data.List.OfFn`), draft the
implementation, and run the three verification commands above. I
checked every definition and lemma statement against its intended
mathematical meaning, and went through each proof term individually,
unfolding `initialSegment`, `IsBranch`, and `body` to confirm the
`simp`/`simpa` calls actually close the resulting goals rather than
just trusting that they compiled. |
t-set-theory |
42/1 |
Mathlib/SetTheory/Descriptive/Tree.lean |
1 |
1 |
['github-actions'] |
nobody |
18-56693 18 days ago |
18-64127 18 days ago |
18-64115 18 days |
| 41947 |
hawkrobe author:hawkrobe |
feat(Order/Antisymmetrization): comparable minimal elements are equivalent |
Adds `Minimal.antisymmRel_of_ge` and `Minimal.antisymmRel_of_symmGen` at preorder generality.
---
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
|
32/3 |
Mathlib/Order/Antisymmetrization.lean |
1 |
2 |
['github-actions'] |
nobody |
18-54112 18 days ago |
18-58198 18 days ago |
18-58186 18 days |
| 41943 |
xroblot author:xroblot |
feat(RingTheory/Ideal/HasFiniteQuotients): Finite instance for a quotient by a nonzero ideal |
Add an instance deriving `Finite (R ⧸ I)` from `[Ring.HasFiniteQuotients R]` and `[NeZero I]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
5/1 |
Mathlib/NumberTheory/NumberField/Cyclotomic/Galois.lean,Mathlib/RingTheory/Ideal/Quotient/HasFiniteQuotients.lean |
2 |
11 |
['github-actions', 'leanprover-radar', 'xroblot'] |
nobody |
18-48778 18 days ago |
18-68833 18 days ago |
18-68821 18 days |
| 41651 |
xroblot author:xroblot |
feat(GroupTheory): coatoms of the subgroup lattice |
Add two group-theory results on maximal subgroups (coatoms of the subgroup lattice), plus a small API change:
- `isCyclic_of_isCoatom_subsingleton`: a group with at most one maximal subgroup is cyclic.
- `CommGroup.isSimpleGroup_iff_isCoatom`: a subgroup of a commutative group is maximal iff the quotient by it is simple.
- `comapMk'OrderIso`: retype the codomain of the correspondence-theorem order isomorphism to `Set.Ici N`, making the order API available (also it mirrors `Submodule.comapMkQRelIso`). The two codomains are defeq and there are no use.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-group-theory |
26/1 |
Mathlib/GroupTheory/QuotientGroup/Basic.lean,Mathlib/GroupTheory/SpecificGroups/Cyclic.lean |
2 |
11 |
['SnirBroshi', 'b-mehta', 'github-actions', 'mathlib-merge-conflicts', 'plp127', 'xroblot'] |
nobody |
18-43754 18 days ago |
22-40625 22 days ago |
22-40770 22 days |
| 41949 |
xroblot author:xroblot |
feat(Logic/Basic): add Subtype.subsingleton_iff |
Add `Subtype.subsingleton_iff`: `Subsingleton (Subtype p) ↔ ∀ a b, p a → p b → a = b`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
7/5 |
Mathlib/Algebra/Homology/ComplexShape.lean,Mathlib/Logic/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
18-39834 18 days ago |
18-42946 18 days ago |
18-43700 18 days |
| 41556 |
Thmoas-Guan author:Thmoas-Guan |
feat(RingTheory): add lemmas about `reesAlgebra` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
large-import
|
40/1 |
Mathlib/RingTheory/ReesAlgebra.lean |
1 |
4 |
['github-actions', 'vlad902'] |
nobody |
18-38884 18 days ago |
28-62558 28 days ago |
28-62546 28 days |
| 41817 |
kebekus author:kebekus |
feat: derivative of the Cauchy integral |
If `g` is circle integrable and `w` lies inside the circle, establish that the Cauchy-type integral `fun w ↦ ∮ z in C(c, R), (z - w)⁻¹ • g z` has derivative `∮ z in C(c, R), ((z - w) ^ 2)⁻¹ • g z` at `w`.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
LLM-generated
|
75/0 |
Mathlib/Analysis/Complex/CauchyIntegral.lean |
1 |
3 |
['github-actions', 'j-loreaux', 'kebekus'] |
nobody |
18-36680 18 days ago |
22-19647 22 days ago |
22-19635 22 days |
| 40926 |
Thmoas-Guan author:Thmoas-Guan |
feat(LinearAlgebra): lemmas for `exteriorPower.map` |
Lemmas for `exteriorPower.map`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
9/0 |
Mathlib/LinearAlgebra/ExteriorPower/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
18-35653 18 days ago |
45-39730 45 days ago |
45-39718 45 days |
| 40927 |
Thmoas-Guan author:Thmoas-Guan |
feat(LinearAlgebra): lemmas for vanishing of exteriorPower |
For a module generated by `n` elements, exterior power of order greater than `n` vanishes.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
26/0 |
Mathlib/LinearAlgebra/ExteriorPower/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
18-35636 18 days ago |
45-38920 45 days ago |
45-39476 45 days |
| 40948 |
Thmoas-Guan author:Thmoas-Guan |
feat(LinearAlgebra): exterior power commute with base change |
In this PR, we added the commute of exterior power and base change.
AI usage: filling in construction of the final equivalence with lemmas decribing it, all the preliminary constructions are refactored by human later.
Co-authored-by: Zichen Wang <zichenwang25@stu.pku.edu.cn>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
231/0 |
Mathlib.lean,Mathlib/LinearAlgebra/ExteriorPower/BaseChange.lean |
2 |
2 |
['github-actions', 'grunweg'] |
nobody |
18-35155 18 days ago |
27-29271 27 days ago |
45-19160 45 days |
| 41026 |
Thmoas-Guan author:Thmoas-Guan |
feat(LinearAlgebra): exterior algebra of product module |
In this PR, we proved the exterior algebra of product module is isomorphic to graded tensor product of the two exterior algebras.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
151/0 |
Mathlib.lean,Mathlib/LinearAlgebra/ExteriorAlgebra/Basic.lean,Mathlib/LinearAlgebra/ExteriorAlgebra/Product.lean |
3 |
3 |
['eric-wieser', 'github-actions'] |
nobody |
18-34812 18 days ago |
43-33769 43 days ago |
43-33757 43 days |
| 40922 |
Thmoas-Guan author:Thmoas-Guan |
feat(Algebra/Module): minimal generators of module over local ring |
In this PR, we proved for fg module over local ring, "two set of minimal generators can be transported by an invertible matrix", implemented as the commuting morphism between the source of the two surjection must be bijective.
(The last lemma is for transport between Koszul complex form two set of generators)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
93/0 |
Mathlib.lean,Mathlib/Algebra/Module/MinimalGenerators.lean |
2 |
1 |
['github-actions'] |
nobody |
18-34592 18 days ago |
45-43620 45 days ago |
45-43608 45 days |
| 41942 |
felixpernegger author:felixpernegger |
style: add missing spaces |
This PR adds some missing spaces per style guide (and removes some bad commas)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
161/161 |
Mathlib/Algebra/BigOperators/Pi.lean,Mathlib/Algebra/Category/MonCat/FilteredColimits.lean,Mathlib/Algebra/Lie/Prod.lean,Mathlib/Algebra/Module/Presentation/Basic.lean,Mathlib/Algebra/Module/Torsion/Basic.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/Algebra/Polynomial/Roots.lean,Mathlib/AlgebraicGeometry/AffineSpace.lean,Mathlib/AlgebraicGeometry/ProjectiveSpectrum/Proper.lean,Mathlib/AlgebraicTopology/ModelCategory/Opposite.lean,Mathlib/Analysis/Analytic/Within.lean,Mathlib/Analysis/Convex/TotallyBounded.lean,Mathlib/Analysis/LocallyConvex/Basic.lean,Mathlib/Analysis/SpecialFunctions/Log/InvLog.lean,Mathlib/Analysis/SpecialFunctions/Log/RpowTendsto.lean,Mathlib/CategoryTheory/Abelian/SerreClass/Localization.lean,Mathlib/CategoryTheory/Comma/Over/Basic.lean,Mathlib/CategoryTheory/EpiMono.lean,Mathlib/CategoryTheory/Filtered/Final.lean,Mathlib/CategoryTheory/Filtered/Small.lean,Mathlib/CategoryTheory/Functor/Currying.lean,Mathlib/CategoryTheory/Grothendieck.lean,Mathlib/CategoryTheory/Limits/Shapes/Products.lean,Mathlib/CategoryTheory/Monad/Basic.lean,Mathlib/CategoryTheory/Preadditive/Injective/Basic.lean,Mathlib/CategoryTheory/Products/Basic.lean,Mathlib/CategoryTheory/Sites/Coherent/CoherentTopology.lean,Mathlib/CategoryTheory/Sites/Coherent/ExtensiveSheaves.lean,Mathlib/CategoryTheory/Sites/Coherent/ExtensiveTopology.lean,Mathlib/CategoryTheory/Sites/Continuous.lean,Mathlib/CategoryTheory/Sites/EffectiveEpimorphic.lean,Mathlib/Combinatorics/Matroid/Basic.lean,Mathlib/Combinatorics/Matroid/Circuit.lean,Mathlib/Combinatorics/Matroid/Closure.lean,Mathlib/Combinatorics/Matroid/Dual.lean,Mathlib/Combinatorics/Matroid/Loop.lean,Mathlib/Combinatorics/Matroid/Map.lean,Mathlib/Combinatorics/Matroid/Minor/Contract.lean,Mathlib/Combinatorics/Matroid/Minor/Restrict.lean,Mathlib/Combinatorics/Matroid/Rank/ENat.lean,Mathlib/Combinatorics/Matroid/Sum.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Control/LawfulFix.lean,Mathlib/Data/Finset/Insert.lean,Mathlib/Data/Fintype/EquivFin.lean,Mathlib/Data/Fintype/Perm.lean,Mathlib/Data/Set/Card.lean,Mathlib/Data/Set/Finite/Lattice.lean,Mathlib/Data/Set/Insert.lean,Mathlib/FieldTheory/Galois/Infinite.lean,Mathlib/Lean/Meta.lean,Mathlib/LinearAlgebra/AffineSpace/AffineSubspace/Basic.lean,Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean,Mathlib/LinearAlgebra/Matrix/Ideal.lean,Mathlib/LinearAlgebra/Matrix/PosDef.lean,Mathlib/Logic/Encodable/Basic.lean,Mathlib/Logic/Equiv/Sum.lean,Mathlib/MeasureTheory/Function/UnifTight.lean,Mathlib/MeasureTheory/VectorMeasure/SetIntegral.lean,Mathlib/MeasureTheory/VectorMeasure/WithDensityVec.lean,Mathlib/ModelTheory/Definability.lean,Mathlib/ModelTheory/ElementarySubstructures.lean,Mathlib/NumberTheory/JacobiSum/Basic.lean,Mathlib/Order/Atoms.lean,Mathlib/Order/Filter/Finite.lean,Mathlib/Order/KrullDimension.lean,Mathlib/Order/ScottContinuity.lean,Mathlib/Order/WithBot.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/LowDegree.lean,Mathlib/RepresentationTheory/Intertwining.lean,Mathlib/RingTheory/GradedAlgebra/HomogeneousLocalization.lean,Mathlib/RingTheory/RootsOfUnity/Basic.lean,Mathlib/RingTheory/Smooth/Basic.lean,Mathlib/RingTheory/Valuation/ValuativeRel/Basic.lean,Mathlib/Tactic/FunProp/Core.lean,Mathlib/Tactic/FunProp/Decl.lean,Mathlib/Tactic/FunProp/Elab.lean,Mathlib/Tactic/FunProp/FunctionData.lean,Mathlib/Tactic/FunProp/Mor.lean,Mathlib/Tactic/FunProp/Theorems.lean,Mathlib/Tactic/FunProp/ToBatteries.lean,Mathlib/Tactic/Linarith/Datatypes.lean,Mathlib/Tactic/MkIffOfInductiveProp.lean,Mathlib/Tactic/NormNum/Basic.lean,Mathlib/Tactic/NormNum/Inv.lean,Mathlib/Tactic/ProdAssoc.lean,Mathlib/Tactic/SplitIfs.lean,Mathlib/Topology/Algebra/ContinuousMonoidHom.lean,Mathlib/Topology/CWComplex/Classical/Basic.lean,Mathlib/Topology/Category/CompHaus/EffectiveEpi.lean,Mathlib/Topology/Category/CompHausLike/Limits.lean,Mathlib/Topology/Category/Profinite/Nobeling/Span.lean,Mathlib/Topology/Category/Profinite/Nobeling/Successor.lean,Mathlib/Topology/Category/Profinite/Nobeling/ZeroLimit.lean,Mathlib/Topology/Category/Stonean/Basic.lean,Mathlib/Topology/Connected/Clopen.lean,Mathlib/Topology/Homotopy/Lifting.lean,Mathlib/Topology/Irreducible.lean,Mathlib/Topology/LocallyFinsupp.lean |
99 |
2 |
['github-actions', 'grunweg'] |
nobody |
18-26731 18 days ago |
18-68643 18 days ago |
18-68899 18 days |
| 41913 |
peabrainiac author:peabrainiac |
chore(Data/Set): move lemmas from `Set.Disjoint` to `Disjoint` |
Move three lemmas from the `Set.Disjoint` namespace to the `Disjoint` namespace to enable dot notation.
We do not add deprecation aliases since the lemmas only get moved, not renamed, and having both the lemmas and their deprecated aliases available inside the `Set` namespace could lead to trouble.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
4/3 |
Mathlib/Data/Set/Prod.lean |
1 |
5 |
['SnirBroshi', 'github-actions', 'peabrainiac'] |
nobody |
18-10255 18 days ago |
19-60761 19 days ago |
19-60749 19 days |
| 37745 |
AntoineChambert-Loir author:AntoineChambert-Loir |
feat(RingTheory/AugmentationIdeal): base change for augmentation ideals |
Base change for augmentation ideals
Co-authored with: @mariainesdff
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37744
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
large-import
label:t-algebra$ |
441/1 |
Mathlib.lean,Mathlib/Algebra/Algebra/Hom.lean,Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Module/Submodule/Range.lean,Mathlib/LinearAlgebra/Projection.lean,Mathlib/LinearAlgebra/Span/Defs.lean,Mathlib/LinearAlgebra/TensorProduct/Projection.lean,Mathlib/LinearAlgebra/TensorProduct/RightExactness.lean,Mathlib/LinearAlgebra/TensorProduct/Submodule.lean,Mathlib/Order/Disjoint.lean,Mathlib/RingTheory/Ideal/IsAugmentation.lean,Mathlib/RingTheory/TensorProduct/Basic.lean |
12 |
18 |
['AntoineChambert-Loir', 'dagurtomas', 'github-actions', 'mathlib-dependent-issues'] |
alreadydone assignee:alreadydone |
17-67875 17 days ago |
84-31054 84 days ago |
85-5018 85 days |
| 39687 |
TentativeConvert author:TentativeConvert |
feat(Algebra/Group/Submonoid): type class to indicate that supremum in a SubmonoidClass agrees with supremum of submonoids |
Add a type class `SubmonoidClass.IsConcreteSSup` to indicate that the canonical map `.ofClass` from a class `S` of submonoids of `M` to `Submonoid M` preserves suprema.
---
This PR implements the minimal type class assumption needed to make „pushfoward of gradings along maps of indexing sets“ – see draft PR #39356 – work in some `SetLike` generality.
Given `{S M : Type*} [SetLike S M] [Monoid M] [SubmonoidClass S M]`, we have canonical maps
```
S → Submonoid M → Set M
```
The first is `Submonoid.ofClass`, the second and the composition are `coe` maps coming from the `SetLike` structures. Depending on `S`, these maps may or may not satisfy various properties with respect the lattice structures on `Submonoid M` and `Set M`. Mathlib so far includes the type class `[IsConcreteLE S M]`, which asserts that the composition `S → Set M` is order-preserving and order-reflecting. The type class defined here asserts that the first map, `S → Submonoid M`, preserves suprema.
In examples such as `S = Subgroup M`, `S = Submodule R M`, much more is true – in these cases, `S` is a complete sublattice of `Submonoid M`. But there are also examples where only the weaker property defined here holds, e.g. `S = OpenSubgroup M` for a topological group `M`.
Note on `outParam`: I did *not* write `(M : outParam Type*)` in the assumptions of `SubmonoidClass.IsConcreteSSup` in accordance with the [DocString of `Setlike`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Data/SetLike/Basic.html#SetLike). However, we do have `(B : outParam Type*)` in the definition of `IsConcreteLE`, so perhaps I'm misinterpreting the DocString.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebra
label:t-algebra$ |
56/0 |
Mathlib.lean,Mathlib/Algebra/Group/Submonoid/SSup.lean |
2 |
2 |
['github-actions'] |
joelriou assignee:joelriou |
17-67872 17 days ago |
77-35434 77 days ago |
77-36022 77 days |
| 40648 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/MeasurableSpace/Constructions): remove some defeq abuse |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
7/2 |
Mathlib/MeasureTheory/MeasurableSpace/Constructions.lean,Mathlib/Order/Disjointed.lean |
2 |
2 |
['github-actions', 'wwylele'] |
nobody |
17-66972 17 days ago |
52-66591 52 days ago |
52-66597 52 days |
| 41967 |
peakpoint author:peakpoint |
feat(Data/Set/Finite): `Set.Finite.sigma` |
---
might be worth extracting the corresponding lemma for pi types too
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
37/0 |
Mathlib.lean,Mathlib/Data/Set/Finite/Sigma.lean |
2 |
1 |
['github-actions'] |
nobody |
17-49286 17 days ago |
17-49836 17 days ago |
17-53198 17 days |
| 41860 |
tb65536 author:tb65536 |
feat(GroupTheory/Index): formula for index of centralizer of an element |
This PR proves the formula for the index of the centralizer of an element.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
23/1 |
Mathlib/GroupTheory/GroupAction/Basic.lean,Mathlib/GroupTheory/Index.lean |
2 |
3 |
['github-actions', 'plp127', 'tb65536'] |
nobody |
17-45157 17 days ago |
21-17863 21 days ago |
21-17852 21 days |
| 41961 |
loefflerd author:loefflerd |
feat(NumberTheory/Padics): abstract theory of measures, part II |
Define the Iwasawa algebra of measures on a profinite group G, and show it's an algebra (and commutative if G is).
---
For simplicity, I did not attempt to optimise exactly the minimal typeclass assumptions on `G` required to obtain each typeclass property of `D(G, R)`, as this led to much lengthier code for no clear benefit; I am not aware of interesting examples where `G` is not at a monoid.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
164/0 |
Mathlib.lean,Mathlib/NumberTheory/Padics/Measure/Group.lean |
2 |
2 |
['github-actions'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
17-39420 17 days ago |
18-585 18 days ago |
18-573 18 days |
| 36507 |
BryceT233 author:BryceT233 |
feat(RingTheory/MvPowerSeries): various equivalences for `MvPowerSeries` |
This PR adds a number of equivalences related to power series rings and is patterned after `Mathlib/Algebra/MvPolynomial/Equiv.lean`.
To be specific, it adds:
* `MvPowerSeries.isEmptyEquiv` : The isomorphism between multivariable power series
in no variables and the ground ring.
* `MvPowerSeries.uniqueEquiv` : The isomorphism between multivariable power series
in a single variable and power series over the ground ring.
* `MvPowerSeries.mapEquiv`, `MvPowerSeries.mapAlgEquiv` : The isomorhism between
multivariable power series induced by an isomorphism between the coefficient rings.
* `MvPowerSeries.sumAlgEquiv` : The isomorphism between multivariable power series
in a sum of two types, and multivariable power series in one of the types,
with coefficients in multivariable power series in the other type.
* `MvPowerSeries.commAlgEquiv` : The isomorphism between multivariable power series
in variables `σ` of multivariable power series in variables `τ` and multivariable power series
in variables `τ` of multivariable power series in variables `σ`.
* `MvPowerSeries.optionEquivLeft` : The isomorphism between multivariable power series
in `Option σ` and power series with coefficients in `MvPowerSeries σ R`.
* `MvPowerSeries.optionEquivRight` : The isomorphism between multivariable power series
in `Option σ` and multivariable power series in `σ` with coefficients in `PowerSeries R`
* `MvPowerSeries.finSuccEquiv` : The isomorphism between multivariable power series
in `Fin (n + 1)` and power series over multivariable power series in `Fin n`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [x] depends on: #35329
- [x] depends on: #36506
- [ ] depends on: #40205 |
t-ring-theory |
405/11 |
Mathlib/RingTheory/MvPowerSeries/Basic.lean,Mathlib/RingTheory/MvPowerSeries/Equiv.lean |
2 |
27 |
['AntoineChambert-Loir', 'BryceT233', 'Thmoas-Guan', 'WenrongZou', 'YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
mattrobball assignee:mattrobball |
16-72974 16 days ago |
16-73606 16 days ago |
74-20368 74 days |
| 41759 |
JovanGerb author:JovanGerb |
chore: deprecate `haveI'` and `letI'` |
It seems that the uses of `haveI'` can simply be replaced by `have`. If this doesn't cause performance regressions, then I think that this is desired.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
139/138 |
Mathlib/Algebra/Order/Field/Power.lean,Mathlib/NumberTheory/LucasLehmer.lean,Mathlib/Tactic/HaveI.lean,Mathlib/Tactic/ModCases.lean,Mathlib/Tactic/NormNum/Basic.lean,Mathlib/Tactic/NormNum/BigOperators.lean,Mathlib/Tactic/NormNum/DivMod.lean,Mathlib/Tactic/NormNum/Eq.lean,Mathlib/Tactic/NormNum/GCD.lean,Mathlib/Tactic/NormNum/Ineq.lean,Mathlib/Tactic/NormNum/Inv.lean,Mathlib/Tactic/NormNum/LegendreSymbol.lean,Mathlib/Tactic/NormNum/OfScientific.lean,Mathlib/Tactic/NormNum/Ordinal.lean,Mathlib/Tactic/NormNum/Pow.lean,Mathlib/Tactic/NormNum/Prime.lean,Mathlib/Tactic/Positivity/Basic.lean,Mathlib/Tactic/Positivity/Core.lean,Mathlib/Tactic/ReduceModChar.lean |
19 |
10 |
['JovanGerb', 'eric-wieser', 'github-actions', 'leanprover-radar', 'thorimur'] |
nobody |
16-72785 16 days ago |
23-66817 23 days ago |
23-68631 23 days |
| 39763 |
NoahW314 author:NoahW314 |
feat(Algebra/GroupWithZero/Divisibility): add `mul_dvd_left_iff_isUnit` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
9/0 |
Mathlib/Algebra/GroupWithZero/Divisibility.lean |
1 |
1 |
['github-actions'] |
joelriou assignee:joelriou |
16-67875 16 days ago |
75-56753 75 days ago |
75-56741 75 days |
| 41988 |
vlad902 author:vlad902 |
feat(FreeGroup): characterize commutative/cyclic free groups |
Characterize cyclic/commutative free groups as being those on ≤ 1 generators. I generalize and move around some instances along the way to avoid new imports.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
64/23 |
Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/FieldTheory/Galois/Basic.lean,Mathlib/GroupTheory/FreeGroup/Basic.lean,Mathlib/GroupTheory/FreeGroup/Reduce.lean,Mathlib/GroupTheory/SpecificGroups/Cyclic/Basic.lean,Mathlib/Logic/Unique.lean |
7 |
3 |
['github-actions', 'vlad902'] |
nobody |
16-42544 16 days ago |
16-46134 16 days ago |
16-46277 16 days |
| 41910 |
wwylele author:wwylele |
feat(Analysis/Normed/Affine): mapping dist with homothety |
---
The file has all sorts of lemma involving `dist` and `homothety`, but the one that applies homothety on both points is surprisingly missing.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
14/0 |
Mathlib/Analysis/Normed/Affine/AddTorsor.lean |
1 |
1 |
['github-actions'] |
nobody |
16-21066 16 days ago |
19-65140 19 days ago |
19-65128 19 days |
| 37666 |
TJHeeringa author:TJHeeringa |
feat(Analysis/InnerProductSpace/Reproducing): Lipschitz wrt the kernel pseudometric |
RKHSs $H$ have bounded point evaluations. This induces a pseudometric on the underlying space `X`. The function $f\in H$ are Lipschitz continuous with Lipschitz constant $\||f\||$. This adds the theorem `lipschitzWith_ennnorm` encoding this.
---
This PR uses the name `lipschitzWith`, but doesn't actually proof a statment like `LipschitzWith ‖f‖₊ f` where Lipschitzianity is defined with respect to a pseudometric. We could create an instance for the pseudometric. That would give the code below. However, there the `(ofKMD 𝕜 V H)` in the `LipschitzWith ‖f‖₊ (f ∘ (ofKMD 𝕜 V H))` is undesirable. If we pursue the route with this pseudometric instance, then I would need some help, because I don't know how to get around it.
```lean4
section Lipschitz
variable (𝕜 X V) in
/-- Type copy of domain `X` meant for being equipped with the kernel metric, abbreviated `KMD`. -/
@[nolint unusedArguments]
def KernelMetricDomain [RKHS 𝕜 H X V] : Type _ := X
variable (𝕜 V) in
/-- `toKMD` is the identity function to the `KernelMetricDomain 𝕜 X V H` of a `X`. -/
def toKMD : X ≃ KernelMetricDomain 𝕜 X V H := Equiv.refl _
variable (𝕜 V) in
/-- `ofKMD` is the identity function from the `KernelMetricDomain 𝕜 X V H` to `X`. -/
def ofKMD : KernelMetricDomain 𝕜 X V H ≃ X := Equiv.refl _
omit [CompleteSpace H] [CompleteSpace V] in
@[simp] theorem toKMD_symm_eq : (toKMD 𝕜 V H).symm = ofKMD 𝕜 V H := by rfl
omit [CompleteSpace H] [CompleteSpace V] in
@[simp] theorem ofKMD_symm_eq : (ofKMD 𝕜 V H).symm = toKMD 𝕜 V H := by rfl
omit [CompleteSpace H] [CompleteSpace V] in
@[simp] theorem ofKMD_toKMD (x : X) : ofKMD 𝕜 V H (toKMD 𝕜 V H x) = x := by rfl
omit [CompleteSpace H] [CompleteSpace V] in
@[simp]
theorem toKMD_ofKMD (x : KernelMetricDomain 𝕜 X V H) :
toKMD 𝕜 V H (ofKMD 𝕜 V H x) = x := by
rfl
variable (𝕜 X V) in
instance instKMDPseudoEMetricSpace [RKHS 𝕜 H X V] :
PseudoEMetricSpace (KernelMetricDomain 𝕜 X V H) :=
PseudoEMetricSpace.induced ((kerFun H) ∘ ofKMD 𝕜 V H) inferInstance
@[simp]
lemma edist_KMD (x y : KernelMetricDomain 𝕜 X V H) :
edist x y = edist (kerFun H (ofKMD 𝕜 V H x)) (kerFun H (ofKMD 𝕜 V H y)) :=
rfl
variable {H} in
theorem lipschitzWith_ennnorm' (f : H) (x y : X) :
edist (f x) (f y) ≤ ‖f‖₊ * edist (kerFun H x) (kerFun H y) := by
by_cases h : f = 0
· simp [h]
simp_rw [edist_eq_enorm_sub, ← eval_apply, ← sub_apply]
grw [le_opENorm]
rw [← enorm_eq_nnnorm, mul_comm, ENNReal.mul_le_mul_iff_right (enorm_ne_zero.mpr h) enorm_ne_top]
simp_rw [kerFun_eq_adjoint_eval, ← LinearIsometryEquiv.map_sub, enorm_le_iff_norm_le,
LinearIsometryEquiv.norm_map, le_refl]
variable {H} in
theorem lipschitzWith_ennnorm (f : H) :
LipschitzWith ‖f‖₊ (f ∘ (ofKMD 𝕜 V H)) :=
fun x y => by simpa [edist_KMD] using lipschitzWith_ennnorm' f (ofKMD 𝕜 V H x) (ofKMD 𝕜 V H y)
end Lipschitz
```
#### AI:
I had the instance outside the theorem. Lean gave problems with resolving type classes / instance synthesis. I asked Claude and ChatGPT to interpret the error and fix it. The latter just spit gibberish and the former suggested inlining but in a way that didn't work. Then, I asked on Zulip and got the same suggestion but working. The type synonym alternative was also suggested there. The final PR doesn't include the instance because of the aforementioned reasons.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
new-contributor
|
26/6 |
Mathlib/Analysis/InnerProductSpace/Reproducing.lean |
1 |
10 |
['TJHeeringa', 'github-actions', 'j-loreaux', 'jkandel1'] |
nobody |
16-14079 16 days ago |
16-14727 16 days ago |
23-30764 23 days |
| 41101 |
YaelDillies author:YaelDillies |
feat(Data/{ENat,ENNReal,EReal}): missing coercion lemmas |
From MeanFourier
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
30/0 |
Mathlib/Data/ENat/Basic.lean,Mathlib/Data/EReal/Basic.lean,Mathlib/Data/Real/ENatENNReal.lean |
3 |
9 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
16-10919 16 days ago |
16-13565 16 days ago |
37-1031 37 days |
| 42012 |
grunweg author:grunweg |
feat: `isInvertible_mfderiv_extend` |
Prove that extended charts have invertible `mfderiv`, provided they lie in a maximal atlas.
This generalises `isInvertible_mfderiv_extChartAt` and its preliminary lemmas to any extended chart in the maximal atlas: this will be used in #41796 to prove that immersions have immersed points.
----------
- [x] depends on: https://github.com/leanprover-community/mathlib4/pull/42011
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
132/63 |
Mathlib/Geometry/Manifold/MFDeriv/Atlas.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
15-78275 15 days ago |
16-4293 16 days ago |
16-4610 16 days |
| 42017 |
plp127 author:plp127 |
chore(Algebra/MvPolynomial/Eval): deprecate duplicate definition |
Deprecate `MvPolynomial.eval₂AlgHom`, which is a duplicate of `MvPolynomial.aeval`. I chose to keep `MvPolynomial.aeval` over `MvPolynomial.eval₂AlgHom` because the corresponding definition for univariate polynomials is `Polynomial.aeval`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
26/24 |
Mathlib/Algebra/MvPolynomial/Eval.lean,Mathlib/RingTheory/DividedPowerAlgebra/Init.lean |
2 |
1 |
['github-actions'] |
nobody |
15-75343 15 days ago |
15-76899 15 days ago |
15-77837 15 days |
| 38002 |
Raph-DG author:Raph-DG |
feat(Topology): Relating irreducible components of a space to codimension one points in non dense subsets |
In this PR we show that the coheight zero points of a sober space (in the specialization order) correspond to the irreducible components. Furthermore, we show that the coheight one points of any non dense subset p of X (in the specialization order on X) have coheight zero in the specialization order on p.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import
t-topology
|
112/0 |
Mathlib/Order/Hom/Basic.lean,Mathlib/Order/KrullDimension.lean,Mathlib/Order/Minimal.lean,Mathlib/Topology/Inseparable.lean,Mathlib/Topology/KrullDimension.lean,Mathlib/Topology/Sober.lean |
6 |
7 |
['ADedecker', 'Raph-DG', 'dagurtomas', 'github-actions', 'mathlib-merge-conflicts'] |
fpvandoorn assignee:fpvandoorn |
15-67877 15 days ago |
43-11382 43 days ago |
111-8265 111 days |
| 30637 |
strihanje01 author:strihanje01 |
feat(Combinatorics/SetFamily/Lindstrom): Lindstrom's theorem for subfamilies with equal unions |
add Lindstrom's theorem and its strengthening for equal intersections
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
211/0 |
Mathlib.lean,Mathlib/Combinatorics/SetFamily/Lindstrom.lean |
2 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
15-66975 15 days ago |
37-34039 37 days ago |
68-83523 68 days |
| 42015 |
plp127 author:plp127 |
chore(GroupTheory/FreeGroup): fix recursor argument name |
Fix the argument names to `FreeGroup.induction_on` and `FreeAddGroup.induction_on`. Name the motive `motive` and name the minor premises according to their contents.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
6/6 |
Mathlib/GroupTheory/FreeGroup/Basic.lean |
1 |
1 |
['felixpernegger', 'github-actions'] |
nobody |
15-63671 15 days ago |
15-85281 15 days ago |
15-85269 15 days |
| 41957 |
YijunYuan author:YijunYuan |
feat(NumberTheory/Padics/Complex): add densely normed field and separable space instances |
Equip the field `ℂ_[p]` of `p`-adic complex numbers and its dense subfield
`PadicAlgCl p` (the algebraic closure of `ℚ_[p]`) with two further standard
typeclass instances.
Main additions:
* `DenselyNormedField (PadicAlgCl p)`: the norm takes values dense in the
positive reals. The witness between two given bounds `a < b` is built from an
`n`-th root `z` of `p` (which exists since `PadicAlgCl p` is algebraically
closed): choosing `n` so that `(a / b) ^ n < ‖p‖` gives `a / b < ‖z‖ < 1`, and
some integer power `z ^ m` then has norm strictly between `a` and `b`.
* `SeparableSpace (PadicAlgCl p)`: the elements algebraic over `ℚ` form a
countable dense subset. Density follows from continuity of roots — `α` is a
root of its minimal polynomial `f` over `ℚ_[p]`, and approximating the
coefficients of `f` by a polynomial `g` over the dense subfield `ℚ` yields a
root `β` of `g` (hence algebraic over `ℚ`) arbitrarily close to `α`.
* The corresponding instances `DenselyNormedField ℂ_[p]` and
`SeparableSpace ℂ_[p]` are then inferred, `ℂ_[p]` being the completion of
`PadicAlgCl p`.
Supporting general instance:
* `DenselyNormedField (UniformSpace.Completion A)` for a densely normed field
`A` with `CompletableTopField A`, since the norm on the completion extends the
norm on `A`.
The existing `NontriviallyNormedField` instances on `PadicAlgCl p` and `ℂ_[p]`
are simplified to `inferInstance`, as they now follow from the new
`DenselyNormedField` instances. |
new-contributor |
123/19 |
Mathlib/Analysis/Normed/Field/Dense.lean,Mathlib/Analysis/Normed/Module/Completion.lean,Mathlib/NumberTheory/Padics/Complex.lean |
3 |
8 |
['YijunYuan', 'github-actions', 'pechersky'] |
riccardobrasca assignee:riccardobrasca |
15-51386 15 days ago |
17-43414 17 days ago |
18-17578 18 days |
| 42024 |
NoneMore author:NoneMore |
feat(Data/Set/Card): characterize finite lower bounds on encard |
A set has the cardinality at least `n` if and only if it has a sequence of length `n` with distinct elements.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
AI disclosure: The proof was structurally simplified following the `/lean4:golf` workflow from Lean 4 Skills.
[](https://gitpod.io/from-referrer/)
|
t-data |
16/0 |
Mathlib/Data/Set/Card.lean |
1 |
1 |
['github-actions'] |
nobody |
15-31307 15 days ago |
15-33294 15 days ago |
15-33282 15 days |
| 39692 |
YaelDillies author:YaelDillies |
chore(Algebra/Order/BigOperators): follow the `₀` naming convention |
We have long agreed that `MonoidWithZero` lemmas corresponding to `Monoid` lemmas should be suffixed with `₀`, while currently it is the `Monoid` lemmas that are primed.
Also deprecate two primed lemmas that only differed from the unprimed versions in a minor way.
## Renames
Moves:
* `finprod_le_finprod'` → `finprod_le_finprod`
* `finprod_le_finprod` → `finprod_le_finprod₀`
* `Finset.prod_le_prod'` → `Finset.prod_le_prod`
* `Finset.one_le_prod'` → `Finset.one_le_prod`
* `Finset.one_le_prod''` → `Finset.one_le_prod`
* `Finset.sum_nonneg'` → `Finset.sum_nonneg`
* `Finset.prod_le_one'` → `Finset.prod_le_one`
* `Finset.prod_le_prod_of_subset_of_one_le'` → `Finset.prod_le_prod_of_subset_of_one_le`
* `Finset.prod_le_prod_of_subset_of_le_one'` → `Finset.prod_le_prod_of_subset_of_le_one`
* `Finset.prod_mono_set_of_one_le'` → `Finset.prod_mono_set_of_one_le`
* `Finset.prod_anti_set_of_le_one'` → `Finset.prod_anti_set_of_le_one`
* `Finset.prod_le_univ_prod_of_one_le'` → `Finset.prod_le_univ_prod_of_one_le`
* `Finset.prod_eq_one_iff_of_one_le'` → `Finset.prod_eq_one_iff_of_one_le`
* `Finset.prod_eq_one_iff_of_le_one'` → `Finset.prod_eq_one_iff_of_le_one`
* `Finset.single_le_prod'` → `Finset.single_le_prod`
* `Finset.prod_fiberwise_le_prod_of_one_le_prod_fiber'` → `Finset.prod_fiberwise_le_prod_of_one_le_prod_fiber`
* `Finset.prod_le_prod_fiberwise_of_prod_fiber_le_one'` → `Finset.prod_le_prod_fiberwise_of_prod_fiber_le_one`
* `Finset.abs_sum_of_nonneg'` → `Finset.abs_sum_of_nonneg`
* `Finset.prod_le_prod_of_subset'` → `Finset.prod_le_prod_of_subset`
* `Finset.prod_mono_set'` → `Finset.prod_mono_set`
* `Finset.prod_le_prod_of_ne_one'` → `Finset.prod_le_prod_of_ne_one`
* `Finset.prod_lt_prod'` → `Finset.prod_lt_prod`
* `Finset.prod_lt_prod_of_nonempty'` → `Finset.prod_lt_prod_of_nonempty`
* `Finset.prod_lt_prod_of_subset'` → `Finset.prod_lt_prod_of_subset`
* `Finset.single_lt_prod'` → `Finset.single_lt_prod`
* `Finset.exists_lt_of_prod_lt'` → `Finset.exists_lt_of_prod_lt`
* `Finset.exists_le_of_prod_le'` → `Finset.exists_le_of_prod_le`
* `Finset.exists_one_lt_of_prod_one_of_exists_ne_one'` → `Finset.exists_one_lt_of_prod_one_of_exists_ne_one`
* `Fintype.prod_mono'` → `Fintype.prod_mono`
* `Fintype.prod_strictMono'` → `Fintype.prod_strictMono`
* `List.Forall₂.prod_le_prod'` → `List.Forall₂.prod_le_prod`
* `List.Sublist.prod_le_prod'` → `List.Sublist.prod_le_prod`
* `List.SublistForall₂.prod_le_prod'` → `List.SublistForall₂.prod_le_prod`
* `List.prod_le_prod'` → `List.prod_le_prod`
* `List.prod_lt_prod'` → `List.prod_lt_prod`
* `List.exists_lt_of_prod_lt'` → `List.exists_lt_of_prod_lt`
* `List.exists_le_of_prod_le'` → `List.exists_le_of_prod_le`
* `Multiset.prod_lt_prod'` → `Multiset.prod_lt_prod`
* `Multiset.prod_lt_prod_of_nonempty'` → `Multiset.prod_lt_prod_of_nonempty`
* `Finset.prod_le_prod` → `Finset.prod_le_prod₀`
* `Finset.prod_le_one` → `Finset.prod_le_one₀`
* `Finset.one_le_prod` → `Finset.one_le_prod₀`
* `Finset.prod_le_prod_of_subset_of_one_le` → `Finset.prod_le_prod_of_subset_of_one_le₀`
* `Finset.prod_le_prod_of_subset_of_le_one` → `Finset.prod_le_prod_of_subset_of_le_one₀`
* `Finset.prod_mono_set_of_one_le` → `Finset.prod_mono_set_of_one_le₀`
* `Finset.prod_anti_set_of_le_one` → `Finset.prod_anti_set_of_le_one₀`
* `Finset.prod_lt_prod` → `Finset.prod_lt_prod₀`
* `Finset.prod_lt_prod_of_nonempty` → `Finset.prod_lt_prod_of_nonempty₀`
## Deprecations
* `Finset.sum_nonneg'`, `Finset.one_le_prod''`
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/345428-mathlib-reviewers/topic/The.20.E2.82.80.20suffix/with/604912624)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-order
label:t-algebra$ |
303/229 |
Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/Group/Submonoid/Pointwise.lean,Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/Algebra/Order/BigOperators/Group/List.lean,Mathlib/Algebra/Order/BigOperators/Group/Multiset.lean,Mathlib/Algebra/Order/BigOperators/GroupWithZero/Finset.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Asymptotics/SpecificAsymptotics.lean,Mathlib/Analysis/BoxIntegral/DivergenceTheorem.lean,Mathlib/Analysis/Complex/Exponential.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/InnerProductSpace/Orientation.lean,Mathlib/Analysis/InnerProductSpace/Subspace.lean,Mathlib/Analysis/Normed/Ring/Basic.lean,Mathlib/Analysis/Normed/Ring/InfiniteProd.lean,Mathlib/Analysis/ODE/DiscreteGronwall.lean,Mathlib/Analysis/Polynomial/MahlerMeasure.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/Extremal.lean,Mathlib/Analysis/SpecificLimits/Basic.lean,Mathlib/MeasureTheory/Constructions/Pi.lean,Mathlib/MeasureTheory/Measure/HasOuterApproxClosedProd.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Measure/Lebesgue/VolumeOfBalls.lean,Mathlib/NumberTheory/Bertrand.lean,Mathlib/NumberTheory/Height/Basic.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/NumberTheory/NumberField/InfinitePlace/Basic.lean,Mathlib/NumberTheory/Primorial.lean,Mathlib/NumberTheory/SelbergSieve.lean,Mathlib/NumberTheory/SiegelsLemma.lean,Mathlib/NumberTheory/SmoothNumbers.lean,Mathlib/Probability/ProductMeasure.lean,Mathlib/RingTheory/Polynomial/Cyclotomic/Eval.lean,Mathlib/Topology/Algebra/InfiniteSum/ENNReal.lean,Mathlib/Topology/Algebra/InfiniteSum/Order.lean |
35 |
15 |
['Vierkantor', 'YaelDillies', 'b-mehta', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'vihdzp'] |
b-mehta assignee:b-mehta |
15-13907 15 days ago |
15-34620 15 days ago |
30-7983 30 days |
| 39537 |
robin-carlier author:robin-carlier |
feat(CategoryTheory/Bicategory/Span): bicategories of spans |
In this PR, we extend the constructions from #39536 to a bicategory structure on `Spans C Wₗ Wᵣ`, which is a type alias for `C`, where the 1-morphisms are spans in `C` with left leg satisfying `Wₗ` and the right leg satisfies `Wᵣ`.
From [SymmMonCoherence](https://github.com/robin-carlier/SymmMonCoherence)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39536
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
370/3 |
Mathlib/CategoryTheory/Bicategory/Span/Basic.lean |
1 |
8 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'robin-carlier'] |
nobody |
15-8118 15 days ago |
15-8969 15 days ago |
15-20978 15 days |
| 37562 |
IvanRenison author:IvanRenison |
feat(Combinatorics/SimpleGraph): add several lemmas about when `Walk.bypass` and `Walk.cycleBypass` do nothing |
Co-authored-by: Vlad Tsyrklevich <vlad@tsyrklevi.ch>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37577
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
50/4 |
Mathlib/Combinatorics/SimpleGraph/Metric.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean |
2 |
24 |
['IvanRenison', 'SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'ocfnash', 'vlad902'] |
nobody |
14-80088 14 days ago |
14-80683 14 days ago |
39-80467 39 days |
| 39857 |
plp127 author:plp127 |
chore(Order/CompleteLattice/Basic): `Sort*` polymorphism |
Generalize some theorems from `Type*` to `Sort*`. Also make type-variables explicitly either `Type*` or `Sort*`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
15/13 |
Mathlib/Order/CompleteLattice/Basic.lean |
1 |
5 |
['SnirBroshi', 'b-mehta', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
14-76126 14 days ago |
14-79019 14 days ago |
72-59785 72 days |
| 42041 |
FrankieNC author:FrankieNC |
feat(Topology/MetricSpace): minkowski (box-counting) dimension |
Define the lower and upper Minkowski (box-counting) dimensions of a set in a pseudo-emetric space via covering numbers, prove the basic API (monotonicity, closure invariance, unions, finite sets), and show `dimH s ≤ lowerMinkowskiDim s ≤ upperMinkowskiDim s` (Falconer, Fractal Geometry, Ch. 3). |
t-topology |
355/0 |
Mathlib.lean,Mathlib/Topology/MetricSpace/Cover.lean,Mathlib/Topology/MetricSpace/CoveringNumbers.lean,Mathlib/Topology/MetricSpace/MinkowskiDimension.lean,docs/references.bib |
5 |
2 |
['github-actions'] |
nobody |
14-73251 14 days ago |
14-73820 14 days ago |
14-73939 14 days |
| 39847 |
vihdzp author:vihdzp |
chore: redefine `Ordinal.preOmega` using `Order.enum` |
The plan is to deprecate `Ordinal.enumOrd` in favor of `Order.enum`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39136
[](https://gitpod.io/from-referrer/)
|
t-set-theory |
23/21 |
Mathlib/Order/Cofinal.lean,Mathlib/SetTheory/Cardinal/Aleph.lean |
2 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
14-46507 14 days ago |
14-48236 14 days ago |
14-76918 14 days |
| 41981 |
YaelDillies author:YaelDillies |
refactor(Algebra/Polynomial): make into an `abbrev` of `AddMonoidAlgebra` |
... and deprecate the declarations that are now tautological (`toFinsupp`/`ofFinsupp` and their API). For some of the `Polynomial` declarations that needed changing, it was simplest to replace them with the corresponding `AddMonoidAlgebra` one. Note that this replacement is far from exhaustive (a majority of the `Polynomial` API could be replaced this way).
Note that `algebraMap R R[X]` has changed defeq.
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Reworking.20Finsupp.2C.20MonoidAlgebra.2C.20HahnSeries.2E.20PowerSeries/with/609275708)
Generated through several rounds of manual review with Claude Opus. Heavily edited by hand afterwards.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
LLM-generated
label:t-algebra$ |
337/538 |
Mathlib/Algebra/MonoidAlgebra/MapDomain.lean,Mathlib/Algebra/MonoidAlgebra/Support.lean,Mathlib/Algebra/Polynomial/AlgebraMap.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/Algebra/Polynomial/Basis.lean,Mathlib/Algebra/Polynomial/Cardinal.lean,Mathlib/Algebra/Polynomial/Coeff.lean,Mathlib/Algebra/Polynomial/Degree/Defs.lean,Mathlib/Algebra/Polynomial/Degree/IsMonicOfDegree.lean,Mathlib/Algebra/Polynomial/Degree/Operations.lean,Mathlib/Algebra/Polynomial/Degree/Support.lean,Mathlib/Algebra/Polynomial/Derivative.lean,Mathlib/Algebra/Polynomial/Eval/Coeff.lean,Mathlib/Algebra/Polynomial/Eval/Defs.lean,Mathlib/Algebra/Polynomial/Eval/Degree.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/Algebra/Polynomial/GroupRingAction.lean,Mathlib/Algebra/Polynomial/Inductions.lean,Mathlib/Algebra/Polynomial/Laurent.lean,Mathlib/Algebra/Polynomial/Module/Basic.lean,Mathlib/Algebra/Polynomial/Monic.lean,Mathlib/Algebra/Polynomial/Monomial.lean,Mathlib/Algebra/Polynomial/OfFn.lean,Mathlib/Algebra/Polynomial/Reverse.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Algebra/Polynomial/UnitTrinomial.lean,Mathlib/Algebra/Ring/Subring/IntPolynomial.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/LinearAlgebra/Finsupp/VectorSpace.lean,Mathlib/LinearAlgebra/Lagrange.lean,Mathlib/RingTheory/IsAdjoinRoot.lean,Mathlib/RingTheory/KrullDimension/Polynomial.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Polynomial/Opposites.lean,Mathlib/RingTheory/PowerBasis.lean,Mathlib/RingTheory/PowerSeries/Derivative.lean,Mathlib/RingTheory/Spectrum/Prime/Topology.lean,Mathlib/RingTheory/ZariskisMainTheorem.lean,Mathlib/Tactic/ReduceModChar.lean,MathlibTest/InstanceDiamonds.lean |
40 |
8 |
['NoahW314', 'YaelDillies', 'github-actions', 'leanprover-radar', 'tb65536'] |
nobody |
14-46375 14 days ago |
16-53212 16 days ago |
16-55697 16 days |
| 41544 |
YaelDillies author:YaelDillies |
refactor(Algebra/Polynomial): make `coeff` return a `Finsupp` |
This matches `AddMonoidAlgebra`.
Change made by myself, build fixed by Claude Opus, with the fixes reviewed by myself again.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
29/23 |
Counterexamples/MapFloor.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/AlgebraicGeometry/EllipticCurve/DivisionPolynomial/Degree.lean,Mathlib/Data/Nat/Choose/Lucas.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/Coeff.lean,Mathlib/RingTheory/IsAdjoinRoot.lean,Mathlib/RingTheory/Polynomial/Eisenstein/IsIntegral.lean,Mathlib/RingTheory/Polynomial/ScaleRoots.lean,Mathlib/RingTheory/Polynomial/UniversalFactorizationRing.lean,Mathlib/RingTheory/Polynomial/Vieta.lean,Mathlib/RingTheory/PowerSeries/Basic.lean,Mathlib/Tactic/ComputeDegree.lean |
12 |
3 |
['SnirBroshi', 'YaelDillies', 'github-actions'] |
nobody |
14-38145 14 days ago |
24-42324 24 days ago |
24-44147 24 days |
| 41533 |
YaelDillies author:YaelDillies |
refactor: notation for `EventuallyEq` on `Set` |
Introduce definitions `EventuallyEqSet`, `EventuallySubset` as the `Set` versions of `EventuallyEq` and `EventuallyLE`. Make the notations `x =ᶠ[l] y`, `x ≤ᶠ[l] y` `x =ᵐ[μ] y`. elaborate to either the `Set` or functiion version depending on the expected type of the argument.
In mathlib, we currently use the function predicates for sets, which abuses the `Set α := α → Prop` defeq and which will break once we make `Set` a one-field structure.
Note that some simp lemmas aren't in simp normal form anymore because `(· ∈ someSetConstruction)` simplifies already. We might want to make the above into actual definitions instead of notation to avoid this.
Generated by Claude Opus, reviewed line by line by myself, with a large amount of manual edits and further Claude prompting to polish the angles.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
LLM-generated
t-measure-probability
|
695/332 |
Mathlib/Analysis/Analytic/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/Calculus/ContDiff/FTaylorSeries.lean,Mathlib/Analysis/Calculus/ContDiff/Operations.lean,Mathlib/Analysis/Calculus/FDeriv/Congr.lean,Mathlib/Analysis/Calculus/FDeriv/Symmetric.lean,Mathlib/Analysis/Calculus/VectorField.lean,Mathlib/Dynamics/Ergodic/Conservative.lean,Mathlib/Dynamics/Ergodic/Ergodic.lean,Mathlib/Dynamics/Ergodic/RadonNikodym.lean,Mathlib/Geometry/Manifold/ContMDiff/Atlas.lean,Mathlib/Geometry/Manifold/ContMDiff/Defs.lean,Mathlib/Geometry/Manifold/IsManifold/ExtChartAt.lean,Mathlib/Geometry/Manifold/LocalInvariantProperties.lean,Mathlib/Geometry/Manifold/MFDeriv/Basic.lean,Mathlib/Geometry/Manifold/VectorField/LieBracket.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/AEMeasurable.lean,Mathlib/MeasureTheory/Function/ConvergenceInMeasure.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/AEStronglyMeasurable.lean,Mathlib/MeasureTheory/Group/Action.lean,Mathlib/MeasureTheory/Group/FundamentalDomain.lean,Mathlib/MeasureTheory/Integral/Bochner/Set.lean,Mathlib/MeasureTheory/Integral/CurveIntegral/Basic.lean,Mathlib/MeasureTheory/Integral/IntegrableOn.lean,Mathlib/MeasureTheory/Integral/Layercake.lean,Mathlib/MeasureTheory/MeasurableSpace/EventuallyMeasurable.lean,Mathlib/MeasureTheory/Measure/AEMeasurable.lean,Mathlib/MeasureTheory/Measure/Comap.lean,Mathlib/MeasureTheory/Measure/ContinuousPreimage.lean,Mathlib/MeasureTheory/Measure/EverywherePos.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/NullMeasurable.lean,Mathlib/MeasureTheory/Measure/Regular.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/MeasureTheory/Measure/Typeclasses/Finite.lean,Mathlib/MeasureTheory/OuterMeasure/AE.lean,Mathlib/MeasureTheory/OuterMeasure/BorelCantelli.lean,Mathlib/NumberTheory/WellApproximable.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/CardinalInter.lean,Mathlib/Order/Filter/CountableInter.lean,Mathlib/Order/Filter/Defs.lean,Mathlib/Order/Filter/Finite.lean,Mathlib/Order/Filter/IndicatorFunction.lean,Mathlib/Probability/BorelCantelli.lean,Mathlib/Probability/Distributions/Fernique.lean,Mathlib/Probability/Process/LocalProperty.lean,Mathlib/Topology/Baire/BaireMeasurable.lean,Mathlib/Topology/ContinuousOn.lean,Mathlib/Topology/NhdsWithin.lean,Mathlib/Topology/OpenPartialHomeomorph/Continuity.lean,Mathlib/Topology/Separation/Basic.lean |
53 |
6 |
['SnirBroshi', 'YaelDillies', 'github-actions', 'themathqueen'] |
urkud assignee:urkud |
14-38123 14 days ago |
14-41230 14 days ago |
23-80974 23 days |
| 39808 |
chenson2018 author:chenson2018 |
chore(Data): refactor proofs where `grind?` fails |
These are sources of technical debt as now reported in the [weekly linting report](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log/with/544658968). The idea is that a successful `grind` proof can fail to report the theorems it used via `grind?`, which means that if these proofs break across toolchains that it becomes significantly harder to repair.
Most of these are fixed by squeezing the call to `grind` and unsetting `linter.tacticAnalysis.verifyGrindOnly` so they no longer appear in the weekly report. Unfortunately, this can't be on by default for performance reasons, but I highly encourage using this linter when adding any `grind` proofs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
tech debt
|
69/41 |
Mathlib/Data/Bool/Basic.lean,Mathlib/Data/Bool/Set.lean,Mathlib/Data/EReal/Operations.lean,Mathlib/Data/Fin/Tuple/NatAntidiagonal.lean,Mathlib/Data/Finset/Image.lean,Mathlib/Data/Finset/Powerset.lean,Mathlib/Data/Finset/Range.lean,Mathlib/Data/Finset/SMulAntidiagonal.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Chain.lean,Mathlib/Data/List/Count.lean,Mathlib/Data/List/Cycle.lean,Mathlib/Data/List/Induction.lean,Mathlib/Data/List/ReduceOption.lean,Mathlib/Data/List/Sigma.lean,Mathlib/Data/List/Sort.lean,Mathlib/Data/List/TakeDrop.lean,Mathlib/Data/List/Triplewise.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Set/Card.lean,Mathlib/Data/Set/Disjoint.lean,Mathlib/Data/Set/Function.lean,Mathlib/Data/Set/Insert.lean,Mathlib/Data/Sum/Order.lean |
24 |
4 |
['Vierkantor', 'chenson2018', 'github-actions'] |
nobody |
14-37687 14 days ago |
74-52316 74 days ago |
74-52304 74 days |
| 41866 |
YaelDillies author:YaelDillies |
feat(GroupTheory): ` AddSubgroupClass` implies `SMulMemClass` over `ℤ` |
This is useful to talk about lattices in R^n.
Also delete two instances that are now automatically inferred.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
8/9 |
Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Basic.lean,Mathlib/Analysis/Normed/Ring/Basic.lean,Mathlib/GroupTheory/GroupAction/SubMulAction.lean |
3 |
1 |
['github-actions'] |
nobody |
14-36986 14 days ago |
14-39150 14 days ago |
14-42326 14 days |
| 37878 |
YaelDillies author:YaelDillies |
chore(Combinatorics/SimpleGraph): avoid structure relation predicates |
Relation predicates used to be `def`s over a `forall`, which was optimal for usability in fields of other structures. This changed in #35591 and #35192 as a byproduct of reducing apparent code duplication. Unfortunately, the usability issue was overlooked.
This PR restores usability by dropping the use of those relation classes that are `structure`s, ie `Std.Irrefl` and `Std.Transitive`. It also uses more widely the `simp` auto-param on `SimpleGraph.loopless`.
---
- [x] depends on: #38554
I would also be happy to revert #35591 and #35192 since this demonstrates a good use case for the `def` versions of the relation predicates.
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
86/90 |
Archive/Wiedijk100Theorems/Konigsberg.lean,Mathlib/Combinatorics/Graph/Simple.lean,Mathlib/Combinatorics/SimpleGraph/AdjMatrix.lean,Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Bipartite.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/CompleteMultipartite.lean,Mathlib/Combinatorics/SimpleGraph/Extremal/ErdosStoneSimonovits.lean,Mathlib/Combinatorics/SimpleGraph/FiveWheelLike.lean,Mathlib/Combinatorics/SimpleGraph/Hall.lean,Mathlib/Combinatorics/SimpleGraph/LineGraph.lean,Mathlib/Combinatorics/SimpleGraph/Maps.lean,Mathlib/Combinatorics/SimpleGraph/Operations.lean,Mathlib/Combinatorics/SimpleGraph/Prod.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Uniform.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Sum.lean,Mathlib/Combinatorics/SimpleGraph/Trails.lean,Mathlib/Combinatorics/SimpleGraph/Triangle/Tripartite.lean,Mathlib/ModelTheory/Graph.lean,Mathlib/Order/RelClasses.lean |
21 |
19 |
['SnirBroshi', 'Vierkantor', 'YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
b-mehta assignee:b-mehta |
14-36839 14 days ago |
14-39968 14 days ago |
69-10465 69 days |
| 38716 |
YaelDillies author:YaelDillies |
feat(Algebra/Order): `NNRat.cast_sub` |
From AddCombi
---
- [x] depends on: #41850
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
13/2 |
Mathlib/Algebra/Order/Field/Rat.lean,Mathlib/Data/NNRat/Defs.lean |
2 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
mattrobball assignee:mattrobball |
14-35919 14 days ago |
14-37986 14 days ago |
14-44259 14 days |
| 42046 |
LegaSage author:LegaSage |
feat(Polynomial): add Wronskian linear dependence lemmas |
This extends the polynomial Wronskian API of Baek and Lee from the existing coprime case to arbitrary polynomials over a characteristic-zero field.
It adds:
* an explicit nontrivial scalar relation for any pair with zero Wronskian, including zero-polynomial edge cases;
* scalar-multiple corollaries when either polynomial is nonzero;
* the weighted derivative corollary that solutions of `a * f' - n * a' * f = 0` are scalar multiples of `a ^ n` when `a ≠ 0`.
The proof factors out the polynomial gcd and applies the existing `IsCoprime.wronskian_eq_zero_iff` theorem. This PR makes no novelty claim; it packages standard consequences of the existing Baek–Lee coprime Wronskian API.
-------
The implementation was prepared with assistance from OpenAI Codex and reviewed and submitted by LegaSage.
|
t-ring-theory
new-contributor
large-import
LLM-generated
|
96/1 |
Mathlib/RingTheory/Polynomial/Wronskian.lean |
1 |
2 |
['github-actions'] |
nobody |
14-27690 14 days ago |
14-65660 14 days ago |
14-65648 14 days |
| 42047 |
LegaSage author:LegaSage |
feat(RingTheory): add locally nilpotent derivations |
This introduces `Derivation.IsLocallyNilpotent` and basic iteration lemmas for locally nilpotent derivations. The main result is the method-style theorem `Derivation.IsLocallyNilpotent.apply_eq_zero_of_dvd`: over a characteristic-zero domain, if `f ∣ D f` for a locally nilpotent derivation `D`, then `D f = 0`.
The proof uses the iterated Leibniz rule and the top nonvanishing iterates of the two factors.
-----
The implementation and PR text were prepared with assistance from OpenAI Codex. |
t-ring-theory
new-contributor
LLM-generated
|
167/0 |
Mathlib.lean,Mathlib/RingTheory/Derivation/LocallyNilpotent.lean |
2 |
2 |
['github-actions'] |
nobody |
14-27671 14 days ago |
14-65660 14 days ago |
14-65648 14 days |
| 41903 |
felixpernegger author:felixpernegger |
chore: simplify proofs with `grind` |
These all come from the [weekly linting log](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log) "Info messages count".
Note that that counter has two false positives which arise due to "all_goals". These are not included here obviously, but all others are (can undo some if they seriously hurt performance).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
10/40 |
Mathlib/Algebra/Polynomial/RuleOfSigns.lean,Mathlib/AlgebraicTopology/SimplexCategory/ToMkOne.lean,Mathlib/Analysis/Calculus/Taylor.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Analysis/SpecialFunctions/Stirling.lean,Mathlib/Combinatorics/Hypergraph/Basic.lean,Mathlib/Data/List/Defs.lean,Mathlib/LinearAlgebra/AffineSpace/Simplex/Basic.lean,Mathlib/MeasureTheory/MeasurableSpace/Defs.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/MeasureTheory/SetSemiring.lean,Mathlib/NumberTheory/LucasLehmer.lean,Mathlib/Order/CountableSupClosed.lean,Mathlib/Probability/Moments/SubGaussian.lean,Mathlib/Probability/Process/LocalProperty.lean,Mathlib/RingTheory/MvPowerSeries/GaussNorm.lean,Mathlib/Topology/Order/Basic.lean |
18 |
11 |
['Vierkantor', 'felixpernegger', 'github-actions', 'leanprover-radar', 'vlad902'] |
nobody |
14-25027 14 days ago |
20-827 20 days ago |
20-834 20 days |
| 41457 |
NoahW314 author:NoahW314 |
feat(Algebra/Group/Units/Basic): deduplicate lemmas by generalizing to `IsDedekindFiniteMonoid` |
Generalize a group of lemmas to `IsDedekindFiniteMonoid` which previously had versions for `CommMonoid`, `LeftCancelMonoid`, `RightCancelMonoid`, `CancelMonoid`, and `Ordinal`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
30/86 |
Mathlib/Algebra/AffineMonoid/Irreducible.lean,Mathlib/Algebra/Group/Units/Basic.lean,Mathlib/AlgebraicTopology/SimplicialSet/Horn.lean,Mathlib/Combinatorics/Enumerative/DyckWord.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Exponential.lean,scripts/nolints_prime_decls.txt |
7 |
4 |
['NoahW314', 'Vierkantor', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
14-23459 14 days ago |
14-23459 14 days ago |
30-64016 30 days |
| 41976 |
fpvandoorn author:fpvandoorn |
refactor(simps): centralize notation_class and initialize_simps_projections |
* Create a single file that declares all `notation_class` attributes and `initialize_simps_projections` calls for many structures in Core.
* Some of these notation classes were previously declared in `Tactic.Simps.Basic` or in other Mathlib files. The latter was problematic, because then you could have files that import `simps` and a Core structure, but not generate the right simp lemmas.
* Make sure that we import this file instead of the internal `Tactic.Simps.Basic` file throughout Mathlib. Not importing this file can cause `simps` to generate wrong lemmas.
* Also call `initialize_simps_projections` for (some) classes that are declared in Mathlib. (This is not super important, but ensures that these projections have to be only generated once, instead of in every file that imports it.)
* This was prompted by observing faulty behavior in #40653.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import
t-meta
maintainer-merge
|
170/36 |
Mathlib.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Notation/Defs.lean,Mathlib/CategoryTheory/Monoidal/Functor/Types.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/Subtype.lean,Mathlib/Data/TwoPointing.lean,Mathlib/Logic/Equiv/Defs.lean,Mathlib/Order/Defs/LinearOrder.lean,Mathlib/Order/Notation.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Common.lean,Mathlib/Tactic/ProdAssoc.lean,Mathlib/Tactic/ProxyType.lean,Mathlib/Tactic/Simps.lean,Mathlib/Tactic/Simps/Basic.lean,Mathlib/Tactic/Simps/NotationClass.lean,MathlibTest/Simps.lean,MathlibTest/TacticCheckInstancesSimps.lean |
19 |
3 |
['github-actions', 'joneugster'] |
nobody |
14-20202 14 days ago |
17-17484 17 days ago |
17-17744 17 days |
| 38198 |
JovanGerb author:JovanGerb |
chore(Data/Real/Basic): `no_expose` the private operations |
This PR puts `no_expose` on all of the operations on `Real` that are defined in terms of quotients. This is a step in the direction of not exposing the definiton of `Real`.
Note that I leave the `irreducible_def`s as is. This is because the `simpNF` linter does not participate in the module system, and it would time out otherwise. Additionally, downstream users may not be using the module system.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
11/31 |
Mathlib/Data/Real/Basic.lean,Mathlib/Topology/Algebra/Valued/NormedValued.lean |
2 |
18 |
['JovanGerb', 'Vierkantor', 'eric-wieser', 'github-actions', 'leanprover-radar', 'mathlib-merge-conflicts'] |
nobody |
14-18271 14 days ago |
50-66733 50 days ago |
110-65380 110 days |
| 42069 |
plp127 author:plp127 |
feat: isomorphism of `AdjoinRoot (f.comp g)` |
Prove that adjoining a root of `f.comp g` (this is `f(g(x))`) is the same as adjoining a root of `f` first, and then adjoining a root of `g - root f`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
74/0 |
Mathlib/RingTheory/AdjoinRoot.lean |
1 |
1 |
['github-actions'] |
nobody |
13-82949 13 days ago |
13-84015 13 days ago |
13-85022 13 days |
| 42070 |
felixpernegger author:felixpernegger |
chore: order imports of leaf files |
This PR orders imports of (almost) all leaf files to the standard
public import A
public import C
import B
import D
format. Excludes 18 files where `import all` or `public meta import` appears since we dont have a fixed convention for these imports yet.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
492/492 |
Mathlib/Algebra/Algebra/Subalgebra/Matrix.lean,Mathlib/Algebra/Azumaya/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Differentials/Presheaf.lean,Mathlib/Algebra/Category/ModuleCat/ExteriorPower.lean,Mathlib/Algebra/Category/ModuleCat/Pseudofunctor.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/PullbackFree.lean,Mathlib/Algebra/Category/MonCat/Adjunctions.lean,Mathlib/Algebra/Category/MonCat/Colimits.lean,Mathlib/Algebra/Category/Ring/Topology.lean,Mathlib/Algebra/Category/Ring/Under/Property.lean,Mathlib/Algebra/DirectSum/Idempotents.lean,Mathlib/Algebra/FreeMonoid/FreeSemigroup.lean,Mathlib/Algebra/Group/Action/Equidecomp.lean,Mathlib/Algebra/Group/Pointwise/Finset/Density.lean,Mathlib/Algebra/Group/Pointwise/Finset/Interval.lean,Mathlib/Algebra/GroupWithZero/Action/Pointwise/Finset.lean,Mathlib/Algebra/GroupWithZero/Submonoid/CancelMulZero.lean,Mathlib/Algebra/HierarchyDesign.lean,Mathlib/Algebra/Homology/GrothendieckAbelian.lean,Mathlib/Algebra/Lie/Classical.lean,Mathlib/Algebra/Lie/DirectSum.lean,Mathlib/Algebra/Module/GradedModule.lean,Mathlib/Algebra/Module/PointwisePi.lean,Mathlib/Algebra/Module/Presentation/Differentials.lean,Mathlib/Algebra/Module/Presentation/Finite.lean,Mathlib/Algebra/Module/Presentation/RestrictScalars.lean,Mathlib/Algebra/Module/Torsion/PrimaryComponent.lean,Mathlib/Algebra/MvPolynomial/SchwartzZippel.lean,Mathlib/Algebra/NoZeroSMulDivisors/Pi.lean,Mathlib/Algebra/Order/Group/Bounds.lean,Mathlib/Algebra/Order/GroupWithZero/Lex.lean,Mathlib/Algebra/Order/Interval/Basic.lean,Mathlib/Algebra/Order/SuccPred/TypeTags.lean,Mathlib/Algebra/Polynomial/SpecificDegree.lean,Mathlib/Algebra/Ring/Ext.lean,Mathlib/Algebra/Ring/Pointwise/Finset.lean,Mathlib/Algebra/Ring/Subgroup.lean,Mathlib/Algebra/SkewMonoidAlgebra/Lift.lean,Mathlib/Algebra/Star/CentroidHom.lean,Mathlib/Algebra/Star/Free.lean,Mathlib/Algebra/Tropical/BigOperators.lean,Mathlib/AlgebraicGeometry/AffineTransitionLimit.lean,Mathlib/AlgebraicGeometry/AlgebraicCycle/Basic.lean,Mathlib/AlgebraicGeometry/Group/Smooth.lean,Mathlib/AlgebraicGeometry/Morphisms/FlatRank.lean,Mathlib/AlgebraicGeometry/Sites/Representability.lean,Mathlib/AlgebraicTopology/ModelCategory/JoyalTrick.lean,Mathlib/AlgebraicTopology/ModelCategory/Over.lean,Mathlib/AlgebraicTopology/Quasicategory/StrictBicategory.lean,Mathlib/AlgebraicTopology/SimplicialSet/Homology/Nondegenerate.lean,Mathlib/AlgebraicTopology/SimplicialSet/NonsingularColimit.lean,Mathlib/Analysis/Asymptotics/Completion.lean,Mathlib/Analysis/CStarAlgebra/CompletelyPositiveMap.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Note.lean,Mathlib/Analysis/CStarAlgebra/Multiplier.lean,Mathlib/Analysis/Calculus/DerivativeTest.lean,Mathlib/Analysis/Calculus/Gradient/Basic.lean,Mathlib/Analysis/Calculus/ImplicitFunction/Bivariate.lean,Mathlib/Analysis/Calculus/LineDeriv/QuadraticMap.lean,Mathlib/Analysis/Calculus/LocalExtr/LineDeriv.lean,Mathlib/Analysis/Calculus/LocalExtr/Polynomial.lean,Mathlib/Analysis/Calculus/Rademacher.lean,Mathlib/Analysis/Calculus/TangentCone/ProperSpace.lean,Mathlib/Analysis/Calculus/TangentCone/Seq.lean,Mathlib/Analysis/Calculus/TaylorIntegral.lean,Mathlib/Analysis/Complex/Hadamard.lean,Mathlib/Analysis/Complex/Harmonic/Liouville.lean,Mathlib/Analysis/Complex/Tietze.lean,Mathlib/Analysis/Complex/UpperHalfPlane/FixedPoints.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Measure.lean,Mathlib/Analysis/ConstantSpeed.lean,Mathlib/Analysis/Convex/AmpleSet.lean,Mathlib/Analysis/Convex/Birkhoff.lean,Mathlib/Analysis/Convex/Extrema.lean,Mathlib/Analysis/Convex/SimplicialComplex/AffineIndependentUnion.lean,Mathlib/Analysis/Distribution/Support.lean,Mathlib/Analysis/InnerProductSpace/JointEigenspace.lean,Mathlib/Analysis/InnerProductSpace/OfNorm.lean,Mathlib/Analysis/InnerProductSpace/StarOrder.lean,Mathlib/Analysis/LocallyConvex/Montel.lean,Mathlib/Analysis/LocallyConvex/PointwiseConvergence.lean,Mathlib/Analysis/Normed/Affine/ContinuousAffineMap.lean,Mathlib/Analysis/Normed/Affine/MazurUlam.lean,Mathlib/Analysis/Normed/Algebra/MatrixExponential.lean,Mathlib/Analysis/Normed/Algebra/QuaternionExponential.lean,Mathlib/Analysis/Normed/Group/SemiNormedGrp/Completion.lean,Mathlib/Analysis/Normed/Group/SemiNormedGrp/Kernels.lean,Mathlib/Analysis/Normed/Module/ContinuousInverse.lean,Mathlib/Analysis/Normed/Operator/Perturbation/StrictByFinite.lean,Mathlib/Analysis/ODE/Transform.lean,Mathlib/Analysis/Real/Pi/Irrational.lean,Mathlib/Analysis/SpecialFunctions/ArithmeticGeometricMean.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean,Mathlib/Analysis/SpecialFunctions/CompareExp.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/ExpLog/Order.lean,Mathlib/Analysis/SpecialFunctions/Log/Monotone.lean,Mathlib/Analysis/SpecialFunctions/Pochhammer.lean,Mathlib/Analysis/SpecialFunctions/Pow/Integral.lean,Mathlib/Analysis/SpecialFunctions/Pow/NthRootLemmas.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/ChebyshevGauss.lean |
368 |
6 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors'] |
nobody |
13-81569 13 days ago |
13-81829 13 days ago |
13-81849 13 days |
| 41389 |
felixpernegger author:felixpernegger |
chore: reduce `import all` |
Removes `import all` whenever possible. I also tried to "downgrade" by changing to `import` from `import all`, but that never made a difference. Excludes MathlibTest.
For a related PR, see #41222.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
0/7 |
Mathlib/Control/Monad/Cont.lean,Mathlib/Data/Fintype/Parity.lean,Mathlib/Data/Int/Bitwise.lean,Mathlib/Lean/Meta/RefinedDiscrTree/Encode.lean,Mathlib/Tactic/GCongr/Core.lean,Mathlib/Tactic/PNatToNat.lean |
6 |
9 |
['felixpernegger', 'github-actions', 'grunweg', 'leanprover-radar'] |
nobody |
13-78441 13 days ago |
33-5146 33 days ago |
33-5134 33 days |
| 41896 |
felixpernegger author:felixpernegger |
chore: replace `simp_all` with `simp` whenever possible |
Replaces `simp_all (only)` with `simp (only)` whenever possible. About 5% of total `simp_all` occurences. Excludes MathlibTest.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
102/106 |
Archive/Arithcc.lean,Archive/Examples/Eisenstein.lean,Archive/Imo/Imo2024Q3.lean,Mathlib/Algebra/BigOperators/Intervals.lean,Mathlib/Algebra/Category/Grp/ForgetCorepresentable.lean,Mathlib/Algebra/GroupWithZero/ProdHom.lean,Mathlib/Algebra/Homology/SpectralObject/HasSpectralSequence.lean,Mathlib/Algebra/Module/Torsion/PrimaryComponent.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/Algebra/Polynomial/Expand.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Reduction.lean,Mathlib/Analysis/Analytic/Binomial.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Analysis/Meromorphic/Basic.lean,Mathlib/Analysis/Meromorphic/Divisor.lean,Mathlib/Analysis/Meromorphic/FactorizedRational.lean,Mathlib/Analysis/Polynomial/Fourier.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean,Mathlib/Analysis/SpecialFunctions/Integrals/PosLogEqCircleAverage.lean,Mathlib/Analysis/SpecialFunctions/Log/PosLog.lean,Mathlib/CategoryTheory/Action/Basic.lean,Mathlib/CategoryTheory/Functor/TypeValuedFlat.lean,Mathlib/CategoryTheory/Topos/Sheaf.lean,Mathlib/Combinatorics/Quiver/Path/Vertices.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Data/List/Nodup.lean,Mathlib/Data/List/PeriodicityLemma.lean,Mathlib/Data/List/ProdSigma.lean,Mathlib/Data/List/Sigma.lean,Mathlib/Data/Nat/Digits/Lemmas.lean,Mathlib/Data/PEquiv.lean,Mathlib/Data/PNat/Xgcd.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/Sym/Sym2.lean,Mathlib/Data/TypeVec.lean,Mathlib/Data/Vector/Basic.lean,Mathlib/Data/ZMod/Basic.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/GroupTheory/PushoutI.lean,Mathlib/LinearAlgebra/Basis/Exact.lean,Mathlib/LinearAlgebra/Finsupp/Pi.lean,Mathlib/MeasureTheory/Constructions/Polish/StronglyMeasurable.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Measure/CharacteristicFunction/TaylorExpansion.lean,Mathlib/MeasureTheory/Measure/PreVariation.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/Defs.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/NumberTheory/RatFunc/Ostrowski.lean,Mathlib/Order/ScottContinuity/Prod.lean,Mathlib/Order/SetDissipate.lean,Mathlib/Order/SuccPred/Basic.lean,Mathlib/Order/WithBot.lean,Mathlib/Probability/Kernel/Deterministic.lean,Mathlib/Probability/Kernel/Representation.lean,Mathlib/RepresentationTheory/Homological/TateCohomology/Basic.lean,Mathlib/RepresentationTheory/Tannaka.lean,Mathlib/RingTheory/Adjoin/Polynomial/Bivariate.lean,Mathlib/RingTheory/Binomial.lean,Mathlib/RingTheory/DiscreteValuationRing/Basic.lean,Mathlib/RingTheory/HahnSeries/Basic.lean,Mathlib/RingTheory/HahnSeries/Multiplication.lean,Mathlib/RingTheory/HahnSeries/Summable.lean,Mathlib/RingTheory/Multiplicity.lean,Mathlib/RingTheory/Nilpotent/Exp.lean,Mathlib/RingTheory/OrderOfVanishing/Basic.lean,Mathlib/RingTheory/OrderOfVanishing/Noetherian.lean,Mathlib/RingTheory/PowerSeries/Schroder.lean,Mathlib/RingTheory/Valuation/Basic.lean,Mathlib/RingTheory/Valuation/Discrete/Basic.lean,Mathlib/RingTheory/Valuation/IsTrivialOn.lean,Mathlib/RingTheory/Valuation/ValuativeRel/Basic.lean,Mathlib/SetTheory/Lists.lean,Mathlib/Topology/LocallyFinsupp.lean,Mathlib/Topology/MetricSpace/Bounded.lean |
80 |
24 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'themathqueen', 'vlad902'] |
nobody |
13-68536 13 days ago |
19-82095 19 days ago |
20-3576 20 days |
| 39868 |
JuanCoRo author:JuanCoRo |
feat(Algebra/Polynomial): linearity of `divByMonic` and adjacent results |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This PR adds the `R`-linearity of the monic polynomial division map `_ /ₘ q`. It also adds adjacent results that stem from this work.
#### Refactors:
- Reuses the proofs from `add_modByMonic` and `smul_modByMonic` to generalize these results to `add_div_modByMonic` and `smul_div_modByMonic` respectively.
- Replaces the proofs of `add_modByMonic` and `smul_modByMonic` as specializations of the more general theorems `add_div_modByMonic` and `smul_div_modByMonic` respectively.
#### Additions:
- Adds the necessary results for `_ /ₘ q` linearity:
- `add_divByMonic : (p₁ + p₂) /ₘ q = p₁ /ₘ q + p₂ /ₘ q`
- `smul_divByMonic : c • p /ₘ q = c • (p /ₘ q)`
- Adds `_ /ₘ q` as an `R`-linear map:
- `divByMonicHom`: definition of `_ /ₘ q` as a linear map
- `mem_ker_divByMonic`: kernel characterization for `_ /ₘ q`.
- In `Div.lean` adds dual results for `/ₘ` that were already present for `%ₘ`
- `neg_divByMonic : (-p) /ₘ q = -(p /ₘ q)`
- `sub_divByMonic : (p₁ - p₂) /ₘ q = p₁ /ₘ q - p₂ /ₘ q`
- `mul_divByMonic_assoc (hd : q ∣ p₂) : (p₁ * p₂) /ₘ q = p₁ * (p₂ /ₘ q)`
While `mul_divByMonic_assoc` is not exactly the dual of `mul_modByMonic`, I thought it wouldn't hurt to add it.
[](https://gitpod.io/from-referrer/) |
new-contributor
t-algebra
label:t-algebra$ |
54/17 |
Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Polynomial/RingDivision.lean |
2 |
8 |
['JuanCoRo', 'github-actions', 'wwylele'] |
alreadydone assignee:alreadydone |
13-67874 13 days ago |
70-30234 70 days ago |
70-30301 70 days |
| 39807 |
vihdzp author:vihdzp |
feat: universe-heterogeneous cardinal equality |
We introduce a predicate `LiftEq a b`, with notation `a =ₗ b`, which states that two cardinals (in different universes) are equal. This serves as a single canonical spelling for `lift.{v} a = lift.{u} b` and similar incantations.
Future PRs will introduce the analogous predicates for `<` and `≤`, and a notation typeclass so the notation can be reused for `Ordinal` and `OrderType`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory
tech debt
|
316/149 |
Mathlib/CategoryTheory/Abelian/GrothendieckCategory/EnoughInjectives.lean,Mathlib/FieldTheory/IsAlgClosed/Classification.lean,Mathlib/LinearAlgebra/Dimension/Basic.lean,Mathlib/LinearAlgebra/Dimension/Constructions.lean,Mathlib/LinearAlgebra/Dimension/Free.lean,Mathlib/LinearAlgebra/Dimension/FreeAndStrongRankCondition.lean,Mathlib/LinearAlgebra/Dimension/LinearMap.lean,Mathlib/LinearAlgebra/Dimension/StrongRankCondition.lean,Mathlib/ModelTheory/Basic.lean,Mathlib/ModelTheory/Satisfiability.lean,Mathlib/RingTheory/AlgebraicIndependent/Basic.lean,Mathlib/RingTheory/AlgebraicIndependent/RankAndCardinality.lean,Mathlib/RingTheory/AlgebraicIndependent/TranscendenceBasis.lean,Mathlib/RingTheory/LinearDisjoint.lean,Mathlib/RingTheory/Localization/Cardinality.lean,Mathlib/SetTheory/Cardinal/Aleph.lean,Mathlib/SetTheory/Cardinal/Arithmetic.lean,Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Cardinal/Defs.lean,Mathlib/SetTheory/Cardinal/ENat.lean,Mathlib/SetTheory/Cardinal/Order.lean,Mathlib/SetTheory/Cardinal/ToNat.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/ZFC/Cardinal.lean |
24 |
3 |
['acmepjz', 'github-actions', 'mathlib-merge-conflicts'] |
alreadydone assignee:alreadydone |
13-65200 13 days ago |
13-67245 13 days ago |
53-57457 53 days |
| 37751 |
JovanGerb author:JovanGerb |
chore(Order/Filter/IsBounded): use `to_dual` |
use `to_dual` for `Filter.IsBounded`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37747
[](https://gitpod.io/from-referrer/)
|
tech debt |
81/227 |
Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Order/Filter/IsBounded.lean |
2 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
13-63717 13 days ago |
13-66477 13 days ago |
52-68352 52 days |
| 42077 |
themathqueen author:themathqueen |
chore(LinearAlgebra/PerfectPairing/Basic): generalize to `AddCommMonoid` |
There's no reason for `LinearEquiv.flip` to be restricted to `AddCommGroup` over `CommRing`, so we weaken it to `AddCommMonoid` over `CommSemiring`.
But, while we're here, I just weakened the whole file (excluding the Field section).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
7/5 |
Mathlib/LinearAlgebra/PerfectPairing/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
13-59133 13 days ago |
13-59736 13 days ago |
13-59742 13 days |
| 38200 |
Parcly-Taxel author:Parcly-Taxel |
feat: Turán numbers and their strict monotonicity |
`strictMonoOn_turanNumber` was initially proved by @Aristotle-Harmonic, then hand-polished.
Co-authored-by: Aristotle (Harmonic) <aristotle-harmonic@harmonic.fun> |
t-combinatorics
tech debt
maintainer-merge
|
45/20 |
Mathlib/Combinatorics/SimpleGraph/Extremal/Turan.lean |
1 |
9 |
['Parcly-Taxel', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
13-51306 13 days ago |
13-51942 13 days ago |
107-27835 107 days |
| 37685 |
vihdzp author:vihdzp |
feat: Fodor's lemma |
We define stationary sets and prove Fodor's lemma, following the proof at Wikipedia.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39727
I'm surprised that this has a [Wikipedia article](https://en.wikipedia.org/wiki/Fodor%27s_lemma) but isn't listed in 1000.yaml. Is it just because the name has "lemma" instead of "theorem"?
[](https://gitpod.io/from-referrer/)
|
t-set-theory
t-order
large-import
maintainer-merge
|
70/3 |
Mathlib/SetTheory/Cardinal/Cofinality/Club.lean,Mathlib/SetTheory/Ordinal/Basic.lean |
2 |
16 |
['YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'staroperator', 'vihdzp'] |
nobody |
13-51253 13 days ago |
14-48413 14 days ago |
14-83459 14 days |
| 38227 |
vihdzp author:vihdzp |
chore(Algebra/Order/Monoid/Unbundled/Basic): golfing + formatting |
We make use of `variable`, fix some weird spacing, and golf many proofs.
The only breaking change is that `mul_lt_iff_lt_one_left'`/`add_lt_iff_neg_left` now takes an explicit argument, matching the theorems surrounding it.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Not too fond of the `calc` tactic.
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-order
maintainer-merge
label:t-algebra$ |
233/501 |
Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean |
2 |
9 |
['YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
13-50010 13 days ago |
14-1954 14 days ago |
39-8601 39 days |
| 38319 |
Zetetic-Dhruv author:Zetetic-Dhruv |
feat(Combinatorics/SetFamily): Assouad's dual VC bound |
Adds the Finset-level form of Assouad's 1983 dual VC bound: if a family
`𝒜 : Finset (Finset α)` has VC dimension at most `d`, then for any
ground set `X : Finset α` the dual family
`{𝒜.filter (· ∋ x) : x ∈ X}` has VC dimension at most `2 ^ (d + 1) - 1`.
New declarations (in `Finset` namespace):
- `dualFamily 𝒜 X`: for each `x ∈ X`, the subfamily `{A ∈ 𝒜 | x ∈ A}`
- `mem_dualFamily` (`@[simp]`): membership characterisation
- `exists_shatters_of_dualFamily_shatters`: Assouad's bitstring-coding lemma
- `vcDim_dualFamily_le`: the headline VC bound
Proof by Assouad's classical bitstring-coding argument. Sits on top of `Finset.shatterer` / `Finset.vcDim` from
`Mathlib.Combinatorics.SetFamily.Shatter`.
References:
- P. Assouad, Densite et dimension, Ann. Inst. Fourier 33(3) (1983), Thm 2.13
- J. Matousek, Lectures on Discrete Geometry, GTM 212, Springer, 2002, Section 10.3 Lemma 10.3.3
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
maintainer-merge
|
199/0 |
Mathlib.lean,Mathlib/Combinatorics/SetFamily/DualVC.lean,docs/references.bib |
3 |
44 |
['Shreyas4991', 'YaelDillies', 'Zetetic-Dhruv', 'github-actions'] |
b-mehta assignee:b-mehta |
13-49408 13 days ago |
89-79592 89 days ago |
106-40229 106 days |
| 41965 |
bryangingechen author:bryangingechen |
ci: retire legacy zulip emoji workflows, enable emojis on mathlib4-nightly-testing |
This PR replaces our existing zulip emoji reaction workflows with new triggers in the new "reconciliation" workflow (`zulip_emoji_reconcile.yml`) added in #41852.
Deleted workflows:
- `zulip_emoji_ci_status.yaml`: handles CI status reactions. Replaced with `workflow_run` trigger.
- `zulip_emoji_closed_pr.yaml`: handles reactions for closed / reopened PRs. Replaced with `pull_request_target` `closed` and `reopened` triggers.
- `zulip_emoji_labelling.yaml`: handles reactions for awaiting-author and maintainer-merge labels. Replaced with `pull_request_target` `labeled` and `unlabeled` triggers.
- `zulip_emoji_merge_delegate.yaml`: handles reactions for PRs merged into `master`. Replaced with `pull_request_target` `closed` and `reopened` triggers.
The Zulip reaction steps have also been removed from `maintainer_bors_wf_run.yml` which now just handles labels: that label event then triggers the reconciliation workflow rather than handling the reactions on its own.
This PR also adds and wires in a configuration file for `mathlib4-nightly-testing` so that reactions for `nightly#XXX` PRs are also managed.
Prepared with Claude code.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
CI
LLM-generated
file-removed
maintainer-merge
|
159/348 |
.github/workflows/maintainer_bors_wf_run.yml,.github/workflows/zulip_emoji_ci_status.yaml,.github/workflows/zulip_emoji_closed_pr.yaml,.github/workflows/zulip_emoji_labelling.yaml,.github/workflows/zulip_emoji_merge_delegate.yaml,.github/workflows/zulip_emoji_reconcile.yml,.github/zulip-emoji-config-nightly.json,docs/workflows.md |
8 |
3 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
13-20116 13 days ago |
17-58313 17 days ago |
17-58301 17 days |
| 42082 |
attilavjda author:attilavjda |
feat(FieldTheory): reduce Frobenius powers modulo the extension degree |
Adds ring-hom and pointwise lemmas reducing powers of Frobenius modulo the extension degree of a finite field.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
12/0 |
Mathlib/FieldTheory/Finite/Basic.lean |
1 |
5 |
['attilavjda', 'felixpernegger', 'github-actions'] |
nobody |
13-17485 13 days ago |
13-18269 13 days ago |
13-26728 13 days |
| 40725 |
dennj author:dennj |
chore(SetTheory/Ordinal): execute deprecation TODOs |
This PR resolves several ordinal deprecation TODOs by making the `add_one` spelling primary over the older `succ`-spelled theorem names.
It deprecates the old names, rewires Mathlib uses to the new names, and renames `Cardinal.noMaxOrder` to the more precise `Cardinal.noMaxOrder_ord_toType`. The old deprecated names are no longer used internally.
Code clean up in Ordinal.Notation |
t-set-theory
tech debt
|
121/149 |
Mathlib/CategoryTheory/Presentable/Directed.lean,Mathlib/CategoryTheory/Presentable/OrthogonalReflection.lean,Mathlib/CategoryTheory/Presentable/SharplyLT/Basic.lean,Mathlib/CategoryTheory/SmallObject/IsCardinalForSmallObjectArgument.lean,Mathlib/FieldTheory/CardinalEmb.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Basic.lean,Mathlib/SetTheory/Ordinal/Exponential.lean,Mathlib/SetTheory/Ordinal/FixedPoint.lean,Mathlib/SetTheory/Ordinal/Notation.lean,Mathlib/SetTheory/Ordinal/Principal.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/Ordinal/Veblen.lean |
13 |
14 |
['dennj', 'github-actions', 'mathlib-merge-conflicts', 'plp127', 'vihdzp'] |
alreadydone assignee:alreadydone |
13-13674 13 days ago |
14-50356 14 days ago |
41-43682 41 days |
| 42091 |
felixpernegger author:felixpernegger |
chore(RingTheory): fix `backward.inferInstanceAs.wrap.data` exception |
I am not sure why this works, but specifying the proof (rather def?) `Ideal.Quotient.algebraQuotientMapQuotient` resolves the necessity of the exception.
The `unfold ResidueField` is not necessarily needed. Also, `infer_instance` etc, does not work even after unfolding.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
|
3/2 |
Mathlib/RingTheory/Unramified/LocalRing.lean |
1 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
13-8543 13 days ago |
13-9254 13 days ago |
13-9257 13 days |
| 41525 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add Smooth.Basic for smooth representations |
This PR introduces basic setup for smooth representations of a topological group. Hopefully it will serve as preliminary content for those who are interested in formalizing representation theory for p-adic reductive groups in the future. We introduce the following in the file:
1. Define smoothness for representations of a topological group. It is a property for a representation to be smooth: the stabilizer of any vector is open.
2. Prove basic closure properties: subrepresentations, quotient representations, tensor products, direct sums of smooth representations are smooth.
3. Construct smoothHom and contragredient: they are obtained by cutting out smooth vectors from the naive hom and dual.
- [ ] depends on #40941
- [ ] depends on #41081 |
new-contributor
t-algebra
label:t-algebra$ |
345/0 |
Mathlib.lean,Mathlib/RepresentationTheory/Smooth/Basic.lean,Mathlib/RepresentationTheory/Stabilizer.lean,Mathlib/RepresentationTheory/Subrepresentation.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean |
5 |
4 |
['JX-Mo', 'felixpernegger', 'github-actions'] |
nobody |
13-7894 13 days ago |
21-13743 21 days ago |
29-35857 29 days |
| 41081 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add Subrepresentation.toRepresentation_apply and Subrepresentation.quotient |
Add a lemma for `Subrepresentation` recording the inherited group action. Help avoid unfolding `Subrepresentation.toRepresentation` when analyzing the action.
Add the `quotient` representation associated to a `Subrepresentation`. It wraps up `Representation.quotient` and `Representation.Subrepresentation` and then we also record the inherited group action.
|
t-algebra
new-contributor
label:t-algebra$ |
26/0 |
Mathlib/RepresentationTheory/Subrepresentation.lean |
1 |
17 |
['JX-Mo', 'Whysoserioushah', 'github-actions'] |
nobody |
13-6477 13 days ago |
26-46702 26 days ago |
42-16259 42 days |
| 42096 |
NoahW314 author:NoahW314 |
feat(Algebra/Order/IsBotOne): add `IsBotOneClass` instances (Prod, Pi, Subsingleton) |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
15/0 |
Mathlib/Algebra/Order/IsBotOne.lean |
1 |
1 |
['github-actions'] |
nobody |
12-77999 12 days ago |
12-80974 12 days ago |
12-80962 12 days |
| 40973 |
certik author:certik |
feat: multiplicative automatic continuity on ℝ |
This PR adds the multiplicative companion of the existing additive automatic-continuity theorem `AddMonoidHom.continuous_of_measurable`. See the git commit descriptions for all the details.
Depends on https://github.com/leanprover-community/mathlib4/pull/40976.
AI usage disclosure: I used Claude Opus 4.8 to create the theorems and proofs in my own Lean project, then extracted them into this PR since I think they are general purpose and would be useful for other people. I iterated on the proofs until they are as simple as I could get them. I am new to Lean, so if something should be reworked, please let me know. Lean is amazing, I was able to use it to prove various theorems and check my derivations. This is my little contribution back to the project. |
t-measure-probability
LLM-generated
new-contributor
|
159/0 |
Mathlib.lean,Mathlib/MeasureTheory/Measure/Haar/AutomaticContinuity.lean |
2 |
10 |
['certik', 'github-actions', 'mathlib-merge-conflicts', 'wwylele'] |
kex-y assignee:kex-y |
12-67877 12 days ago |
41-45402 41 days ago |
43-69087 43 days |
| 41183 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): new constructor for `IsCardinalFilteredGenerator` |
Instead of `w`-small index categories, one may provide essentially `w`-small categories instead.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
22/3 |
Mathlib/CategoryTheory/Presentable/CardinalFilteredPresentation.lean |
1 |
5 |
['github-actions', 'joelriou', 'smorel394'] |
robin-carlier assignee:robin-carlier |
12-67875 12 days ago |
38-37196 38 days ago |
38-37184 38 days |
| 42045 |
felixpernegger author:felixpernegger |
chore(NumberTheory): make an import private |
Proof of concept. The import is not redundant but can be made private.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
2/1 |
Mathlib/NumberTheory/FLT/Polynomial.lean |
1 |
4 |
['felixpernegger', 'github-actions', 'mathlib-bors'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
12-67870 12 days ago |
14-22897 14 days ago |
14-22894 14 days |
| 39913 |
mkaratarakis author:mkaratarakis |
feat(Combinatorics/Quiver): periodicity and aperiodicity |
cycle lengths, index of imprimitivity, and cyclic partitions for strongly connected quivers.
Part of the Perron–Frobenius formalization (with @or4nge19).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
cc @or4nge19 for review |
t-combinatorics |
191/0 |
Mathlib.lean,Mathlib/Combinatorics/Quiver/Cyclic.lean |
2 |
2 |
['github-actions', 'or4nge19'] |
nobody |
12-66974 12 days ago |
33-72605 33 days ago |
72-31383 72 days |
| 40389 |
YaelDillies author:YaelDillies |
feat(MeasureTheory): the average of a sum of functions |
and other basic lemmas about `average`
From MeanFourier
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
maintainer-merge
|
88/24 |
Mathlib/Analysis/Convex/Integral.lean,Mathlib/MeasureTheory/Integral/Average.lean |
2 |
7 |
['EtienneC30', 'YaelDillies', 'github-actions'] |
nobody |
12-66973 12 days ago |
58-44222 58 days ago |
58-61212 58 days |
| 38334 |
8e7 author:8e7 |
feat(Combinatorics/SimpleGraph/TreeDecomp): define tree decompositions |
Add definition for tree decompositions on simple graphs. Define the tree width of a simple graph and prove basic statements and conversions.
```lean
structure TreeDecomp (G : SimpleGraph V) (W : Type) where
/-- The set of vertices in each bag. -/
bag : W → Finset V
/-- The graph adjacency relation of bags. -/
tree : SimpleGraph W
/-- T must be a tree. -/
isTree : IsTree tree
/-- All vertices in G must appear in some bag. -/
vertexCover : ∀ v : V, ∃ w : W, v ∈ bag w
/-- For any edge (u, v) in G, there is a bag containing both u and v. -/
edgeCover ⦃u v : V⦄ : G.Adj u v → ∃ w : W, u ∈ bag w ∧ v ∈ bag w
/-- For any vertex v in G, the set of bags that contain v is preconnected. -/
connectedBags : ∀ v : V, (tree.induce ({w | v ∈ bag w})).Preconnected
```
AI Usage: Some proofs are written with the help of Claude Code, and everything has been manually reviewed.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #38027
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
LLM-generated
|
395/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/TreeDecomp.lean |
2 |
42 |
['8e7', 'SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
YaelDillies assignee:YaelDillies |
12-41226 12 days ago |
12-55013 12 days ago |
36-38336 36 days |
| 42104 |
vlad902 author:vlad902 |
feat(FreeGroup): `toWord` of multiplication by generators |
Add lemmas unfolding how left-/right- multiplication by a generator behaves on the `toWord` representation of a FreeGroup element, and derive two lemmas about the position of an element inside a multiplicatied word that I require later.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
62/0 |
Mathlib/Data/List/Basic.lean,Mathlib/GroupTheory/FreeGroup/Reduce.lean |
2 |
2 |
['github-actions', 'vlad902'] |
nobody |
12-36750 12 days ago |
12-39588 12 days ago |
12-39576 12 days |
| 42106 |
vlad902 author:vlad902 |
feat(FreeGroup): `zpow` lemmas |
We already have some lemmas for working with `Nat`-valued powers of FreeGroup elements, add some matching lemmas for working with `Int`-valued powers.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
31/0 |
Mathlib/Algebra/Group/Basic.lean,Mathlib/GroupTheory/FreeGroup/Reduce.lean |
2 |
1 |
['github-actions'] |
nobody |
12-35679 12 days ago |
12-39019 12 days ago |
12-39007 12 days |
| 39287 |
xgenereux author:xgenereux |
feat(Localization/AtPrime/Basic): upgrade `equivQuotMaximalIdeal` to an AlgEquiv |
The definition [IsLocalization.AtPrime.equivQuotMaximalIdealPow](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/Localization/AtPrime/Basic.html#IsLocalization.AtPrime.equivQuotMaximalIdealPow) was added in #36783.
The case with `n = 1` is still important and interesting. I have upgraded it to an AlgEquiv using `equivQuotMaximalIdealPow`.
This did break a few small things, because we need to bridge back to a `RingEquiv` in some places. I took the liberty to add some missing `apply` lemmas to ease fixing these proofs.
Disclaimer: I used Claude to suggest the first shot and refined it from there.
Co-authored-by: María Inés de Frutos Fernández <[mariaines.dff@gmail.com](mailto:mariaines.dff@gmail.com)>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
48/66 |
Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/Localization/AtPrime/Extension.lean,Mathlib/RingTheory/Trace/Quotient.lean |
3 |
4 |
['github-actions', 'mathlib-merge-conflicts', 'wwylele', 'xgenereux'] |
nobody |
12-33335 12 days ago |
12-36690 12 days ago |
60-61691 60 days |
| 37723 |
xgenereux author:xgenereux |
feat(Adjoin/Polynomial/Transcendental): Adjoining transcendental elements |
This PR establishes some basic properties about `A[y]` when `y` is transcendental over `A`. These are mostly just carried over from `A[X]`.
- Move `algEquivOfTranscendental` in the newly created file `Mathlib.RingTheory.Adjoin.Polynomial.Transcendental`
- Add `Algebra.adjoin.evalOfTranscendental`. This is technically very similar to `Algebra.adjoin.liftSingleton` but the definition is much simpler. It is also currently more general in the sense that it doesn't require `A` to be a field.
- Some basic instances from `Polynomial`. Note that these are actually theorems because of the hypothesis `(h : Transcendental R s)` everywhere. I've also added a `Fact` version to allow the possibility of instances.
Last note : I initially considered adding some results in `RingTheory.Polynomial.Quotient` where I golfed the file a tiny bit. I removed the unused results but kept the golf.
AI disclaimer : I used Claude to give me some feedback on the PR.
Co-authored-by: María Inés de Frutos Fernández <[mariaines.dff@gmail.com](mailto:mariaines.dff@gmail.com)>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36439
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
167/69 |
Mathlib.lean,Mathlib/FieldTheory/RatFunc/AsPolynomial.lean,Mathlib/RingTheory/Adjoin/Polynomial/Basic.lean,Mathlib/RingTheory/Adjoin/Polynomial/Bivariate.lean,Mathlib/RingTheory/Adjoin/Polynomial/Transcendental.lean,Mathlib/RingTheory/Algebraic/Basic.lean,Mathlib/RingTheory/Polynomial/Quotient.lean |
7 |
6 |
['github-actions', 'leanprover-radar', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'riccardobrasca'] |
nobody |
12-31484 12 days ago |
12-32879 12 days ago |
54-79942 54 days |
| 42085 |
felixpernegger author:felixpernegger |
chore: remove redundant `backward.inferInstanceAs.wrap.data` exception |
"Redundant" in the sense that `lake build` succeeds without it, so ought to be removable; especially since the exceptions are counted as strong tech debt.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
0/1 |
Mathlib/Algebra/Category/MonCat/Limits.lean |
1 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
12-18802 12 days ago |
13-18109 13 days ago |
13-18097 13 days |
| 42117 |
plp127 author:plp127 |
feat: locally compact left-uniform group is complete |
Prove that a locally compact left-uniform group is complete. We already have the theorem for right-uniform groups.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
28/4 |
Mathlib/Topology/Algebra/IsUniformGroup/Basic.lean |
1 |
7 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'plp127'] |
nobody |
11-70423 11 days ago |
12-1386 12 days ago |
12-1374 12 days |
| 37865 |
Jun2M author:Jun2M |
feat(Combinatorics/Graph): Edge cut of `Graph` |
This PR introduces
- `edgeCut`: A function on set of vertices that returns the set of edges with exactly one end in the set.
- `IsEdgeCut`: A predicate for set of edges that promises it is `edgeCut` of some set.
- `IsBridge`: An edge `e` is a bridge iff it is a singleton edge cut.
- `IsBond`: An edge Set `B` is bond iff it is minimal nonempty edge cut.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #35879
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
209/0 |
Mathlib/Combinatorics/Graph/Connected/EdgeCut.Lean,Mathlib/Combinatorics/Graph/Subgraph.lean,docs/references.bib |
3 |
12 |
['Jun2M', 'b-mehta', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
11-68488 11 days ago |
48-75432 48 days ago |
105-73876 105 days |
| 38086 |
dagurtomas author:dagurtomas |
feat(CategoryTheory): composition of profunctors |
---
- [x] depends on: #38085
- [x] depends on: #38382
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
345/2 |
Mathlib.lean,Mathlib/CategoryTheory/Profunctor/Basic.lean,Mathlib/CategoryTheory/Profunctor/Comp.lean |
3 |
20 |
['adamtopaz', 'dagurtomas', 'github-actions', 'mathlib-dependent-issues', 'mathlib-splicebot', 'robin-carlier'] |
mattrobball assignee:mattrobball |
11-67877 11 days ago |
35-34131 35 days ago |
82-83353 82 days |
| 41192 |
RemyDegenne author:RemyDegenne |
feat: `withDensity` of compositions of kernels and measures |
Co-authored-by: Paulo Rauber <pauloeduardorauber@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
LeanMachineLearning
t-measure-probability
|
128/18 |
Mathlib.lean,Mathlib/Probability/Kernel/CompProdEqIff.lean,Mathlib/Probability/Kernel/Composition/WithDensity.lean |
3 |
1 |
['github-actions'] |
kex-y assignee:kex-y |
11-67874 11 days ago |
38-27106 38 days ago |
38-27094 38 days |
| 42118 |
edwardfalk author:edwardfalk |
feat(NumberTheory/ModularForms/JacobiTheta): the derivative of jacobiTheta₂ in τ |
Adds `hasDerivAt_jacobiTheta₂_snd`, the companion to the existing `hasDerivAt_jacobiTheta₂_fst`: for `0 < im τ`,
```lean
HasDerivAt (jacobiTheta₂ z) (∑' n : ℤ, π * I * n ^ 2 * jacobiTheta₂_term n z τ) τ
```
The file already provides `differentiableAt_jacobiTheta₂_fst` / `differentiableAt_jacobiTheta₂_snd` and `hasDerivAt_jacobiTheta₂_fst`, so the `τ`-derivative in `HasDerivAt` form was the one missing corner of that square. The proof mirrors `hasDerivAt_jacobiTheta₂_fst`, evaluating the Fréchet derivative in the direction `(0, 1)` rather than `(1, 0)`.
Unlike the `z`-derivative there is no named function for the `τ`-derivative (`jacobiTheta₂'` has no `τ` analogue), so the statement uses an explicit `tsum`. Happy to introduce a definition instead if reviewers prefer.
No new imports, no changes to existing declarations.
I needed this to differentiate the theta functional equation at its fixed point `τ = i`; it seemed generally useful enough to upstream on its own.
|
t-number-theory
new-contributor
|
23/0 |
Mathlib/NumberTheory/ModularForms/JacobiTheta/TwoVariable.lean |
1 |
2 |
['copilot-pull-request-reviewer', 'github-actions'] |
loefflerd assignee:loefflerd |
11-67873 11 days ago |
11-85396 11 days ago |
11-85384 11 days |
| 38821 |
Jun2M author:Jun2M |
feat(Data/List): rotation of sublist is sublist of rotation |
This PR proves `(∃ L₁ : List α, L ~r L₁ ∧ L₁ <+ L') ↔ (∃ L₂ : List α, L <+ L₂ ∧ L₂ ~r L')`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
10/0 |
Mathlib/Data/List/Rotate.lean |
1 |
5 |
['SnirBroshi', 'eric-wieser', 'github-actions', 'plp127'] |
eric-wieser assignee:eric-wieser |
11-65408 11 days ago |
11-68043 11 days ago |
97-85197 97 days |
| 40687 |
michaellee94 author:michaellee94 |
feat(Analysis/ODE): uniqueness of integral curves on intervals and intersections |
Adds some uniqueness lemmas for integral curves of a Lipschitz vector field, proved via Grönwall's inequality. Split out from #26413 (existence of maximal solutions). |
t-analysis
new-contributor
|
91/0 |
Mathlib/Analysis/ODE/ExistUnique.lean |
1 |
4 |
['github-actions', 'michaellee94', 'sgouezel'] |
sgouezel assignee:sgouezel |
11-63208 11 days ago |
13-29547 13 days ago |
40-2734 40 days |
| 41301 |
joelriou author:joelriou |
feat(CategoryTheory): (co)kernels in functor categories/homological complexes |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
|
95/8 |
Mathlib.lean,Mathlib/Algebra/Homology/HomologicalComplex.lean,Mathlib/Algebra/Homology/HomologicalComplexKernels.lean,Mathlib/CategoryTheory/Limits/FunctorCategory/Shapes/Kernels.lean,Mathlib/CategoryTheory/Limits/Preserves/Shapes/Kernels.lean,Mathlib/CategoryTheory/Limits/Shapes/Kernels.lean |
6 |
1 |
['github-actions'] |
nobody |
11-56180 11 days ago |
36-17190 36 days ago |
36-17178 36 days |
| 42125 |
NoneMore author:NoneMore |
feat(SetTheory/Cardinal): add cardinality bounds for direct limits |
Add an equivalence between a direct limit and its component at an upper-bound index. Use it to prove upper and lower cardinality bounds and criteria for computing the cardinality of direct limits.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
AI disclosure: Most declarations, comments, and documentation in this PR were generated with Codex.
[](https://gitpod.io/from-referrer/)
|
LLM-generated |
109/0 |
Mathlib.lean,Mathlib/Order/DirectedInverseSystem.lean,Mathlib/SetTheory/Cardinal/DirectLimit.lean |
3 |
2 |
['felixpernegger', 'github-actions'] |
nobody |
11-48527 11 days ago |
11-49379 11 days ago |
11-49367 11 days |
| 42080 |
dkunert author:dkunert |
feat(Algebra/Order/Floor): add fract-absorption lemmas for sums and d… |
Add the four one-sided absorption lemmas for `Int.fract`
* `Int.fract_fract_add : fract (fract a + b) = fract (a + b)`
* `Int.fract_add_fract : fract (a + fract b) = fract (a + b)`
* `Int.fract_fract_sub : fract (fract a - b) = fract (a - b)`
* `Int.fract_sub_fract : fract (a - fract b) = fract (a - b)`
all tagged `@[simp]`, together with the two-sided combinations `Int.fract_fract_add_fract` and `Int.fract_fract_sub_fract` as derived corollaries (not `@[simp]`, since their LHS is already simplified by the one-sided lemmas).
Mathlib currently has the existence form (`Int.fract_add`), the inequalities (`Int.fract_add_le`, `Int.fract_add_fract_le`), and absorption equalities only for integer casts (the `Int.fract_add_intCast` family); the `fract`-absorbing equalities themselves were missing (closest relatives: `Int.fract_fract`, `Int.fract_eq_fract`). With the new `@[simp]` set, goals like `fract (fract x + fract y) = fract (x + y)` now close by `simp` — they did not before.
The one-sided factoring of the add lemmas was suggested by Eric Wieser on [Zulip](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Int.2Efract.20of.20a.20sum.2Fdifference.20reduced.20mod.201); the two-sided add corollary is the lemma his two suggestions "combine to give". The sub analogues and the `@[simp]` tagging follow the same pattern. Naming follows the file's `fract_add_intCast`/`fract_intCast_add` convention.
I used the Anthropic LLMs Opus 4.8 and Fable 5 via Claude Code and made the central design decisions. The LLMs produced all the lemmas and proofs. The four lemmas and the two corollaries are fully proved and break nothing in Mathlib. They conform to the style and simpNF conventions. I take responsibility for this contribution.
--- |
t-algebra
new-contributor
LLM-generated
label:t-algebra$ |
22/0 |
Mathlib/Algebra/Order/Floor/Ring.lean |
1 |
3 |
['dkunert', 'github-actions'] |
nobody |
11-43363 11 days ago |
13-43416 13 days ago |
13-43404 13 days |
| 42040 |
fqlx author:fqlx |
feat(NumberTheory): formalize Størmer's theorem on consecutive smooth numbers |
This PR formalizes the Størmer theorem on consecutive smooth numbers.
The new `Mathlib.NumberTheory.Stormer` module:
- develops the Pell/Lucas coefficient needed to study powers of Pell solutions;
- proves that a positive Pell solution whose `y`-coordinate has no prime factors outside the Pell parameter is fundamental;
- encodes consecutive `s`-factored numbers by three-valued prime-exponent data; and
- proves that the set of consecutive `s`-factored pairs is finite, establishes the refined global bound `3 ^ s.card - 2 ^ s.card`, and retains a stronger reusable bound for arbitrary finite subcollections.
The main public conclusions are:
- `card_consecutive_factoredNumbers_le_sub`: the reusable finite-set injection bound;
- `finite_consecutiveFactoredNumbers`: the traditional qualitative Størmer theorem; and
- `ncard_consecutiveFactoredNumbers_le_sub`: the strongest clean public conclusion for the complete set.
The implementation reuses the existing Pell and smooth-number APIs, keeps the core prime-index argument explicit, and includes the corresponding bibliography entry and umbrella import.
--------
AI tools, including OpenAI Codex and ChatGPT, were used extensively in preparing this contribution. They generated and revised substantial portions of the Lean implementation, assisted with proof decomposition and mathlib API discovery, helped iterate on compiler errors and refactoring, and helped draft the PR text.
I selected the theorem and scope, directed the iterations, reviewed the theorem statements and overall proof structure, and ran the listed Lean validation commands. I did not independently author or manually verify every low-level Lean proof step. On the linked self-assessment scale, I would classify this contribution as approximately Level 6: bots coded, human understands mostly.
|
t-number-theory
new-contributor
LLM-generated
|
861/0 |
Mathlib.lean,Mathlib/NumberTheory/Stormer.lean,docs/references.bib |
3 |
6 |
['fqlx', 'github-actions', 'grunweg'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
11-39583 11 days ago |
11-39583 11 days ago |
11-85004 11 days |
| 42132 |
mcdoll author:mcdoll |
feat(Algebra/Module): use `IsApply` for `LieHom` |
No obstacles in this one.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
60/59 |
Mathlib/Algebra/Lie/Basic.lean |
1 |
5 |
['github-actions', 'grunweg', 'leanprover-radar', 'mcdoll'] |
nobody |
11-25721 11 days ago |
11-28849 11 days ago |
11-28837 11 days |
| 42141 |
plp127 author:plp127 |
chore(FieldTheory/Galois/Basic): API for `fixingSubgroupEquiv` and `subgroupEquivAlgEquiv` |
Add lemmas saying what `IntermediateField.fixingSubgroupEquiv` and `IntermediateField.subgroupEquivAlgEquiv` do when applied. Previously there were no lemmas at all mentioning these declarations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
20/0 |
Mathlib/FieldTheory/Galois/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
11-19926 11 days ago |
11-20808 11 days ago |
11-20796 11 days |
| 42142 |
philipp-svinger author:philipp-svinger |
feat(Analysis/ODE): peano existence theorem, Tonelli approximation 1 |
Add Tonelli approximation method for ODEs.
Implement the structure IsPeano similar to IsPicardLindelof. Construct a sequence of approximations using Tonelli technique.
First step towards Peano existence
Co-authored-by: Florian Grube <fgrube@math.uni-bielefeld.de>
Co-authored-by: Paul Niessner <pniessner@math.uni-bielefeld.de>
Co-authored-by: Julian Rolfes <jrolfes@math.uni-bielefeld.de>
Co-authored-by: Luke Schleef <lschleef@math.uni-bielefeld.de>
Co-authored-by: Philipp Svinger <psvinger@math.uni-bielefeld.de>
---
We want to add the proof of the Peano existence theorem for ODEs, using Tonelli approximations.
This will be a series of PRs working towards this goal. In this first PR, we
implement the structure IsPeano similar to IsPicardLindelof and construct a sequence of approximations using Tonelli technique. See our further PRs for more information, last: #42148
---
The statements, definitions and proofs were written without AI.
AI was used afterwards to help us to adapt our code to the style and naming conventions.
We also used it in the process of writing a documentation.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
new-contributor
|
175/0 |
Mathlib.lean,Mathlib/Analysis/ODE/Peano.lean |
2 |
2 |
['github-actions'] |
nobody |
11-18669 11 days ago |
11-18669 11 days ago |
11-18657 11 days |
| 41539 |
rmhi author:rmhi |
chore(RepresentationTheory/Homological/ContCohomology): refactor functoriality |
Currently, functoriality of continuous cohomology is given by `ContCohomology.map`, which takes
a continuous group homomorphism \phi and an intertwining map f: res \phi X \to Y and returns a map from the
continuous cohomology of X to the continuous cohomology of Y.
The problem with this is that `ContCohomology.map` does not have a natural type such as Functor or NatTrans.
In this PR, we split `ContCohomology.map` as a composition of `(continuousCohomologyFunctor _ _ _).map` and a restriction map in continuous cohomology, which is defined as a natural transformation `resNatTrans`.
co-authored-by: Edison Xie @Whysoserioushah
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
499/74 |
Mathlib/RepresentationTheory/Continuous/Basic.lean,Mathlib/RepresentationTheory/Continuous/TopRep.lean,Mathlib/RepresentationTheory/Homological/ContCohomology/Functoriality.lean,Mathlib/Topology/CompactOpen.lean |
4 |
13 |
['JX-Mo', 'github-actions', 'riccardobrasca', 'rmhi'] |
riccardobrasca assignee:riccardobrasca |
11-10259 11 days ago |
11-11766 11 days ago |
22-86319 22 days |
| 42154 |
plp127 author:plp127 |
feat(RingTheory,FieldTheory): add instances for `adjoin` |
Provide instances of `Algebra.FiniteType` and `Module.Finite` and `Algebra.IsIntegral` for `Algebra.adjoin`. Provide instances of `Algebra.EssFiniteType` and `FiniteDimensional` for `IntermediateField.adjoin`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
16/1 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Algebra.lean,Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean,Mathlib/RingTheory/FiniteType.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean |
4 |
4 |
['github-actions', 'leanprover-radar', 'plp127'] |
nobody |
10-86018 10 days ago |
11-7883 11 days ago |
11-7871 11 days |
| 37954 |
jdhart81 author:jdhart81 |
feat(Data/ENNReal/Inv): add ENNReal.div_mul_div_cancel |
Proves a / b * (b / c) = a / c for b ≠ 0, b ≠ ∞ in ENNReal. Proof via mul_div_assoc and existing div_mul_cancel.
AI Disclosure: This PR was developed with assistance from an LLM (Claude, Anthropic) for proof exploration and text drafting. The proof was compiled and verified locally by the contributor, who understands the mathematical content. This lemma is extracted from a larger formalization of information-theoretic bounds (Zenodo DOI: 10.5281/zenodo.19317983).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
8/0 |
Mathlib/Data/ENNReal/Inv.lean,Mathlib/Data/EReal/Inv.lean |
2 |
10 |
['felixpernegger', 'github-actions', 'jdhart81'] |
nobody |
10-80192 10 days ago |
10-85050 10 days ago |
10-85113 10 days |
| 42160 |
b-mehta author:b-mehta |
feat(AlgebraicGeometry/EllipticCurve): roots of the 2-torsion polynomial |
This property was mentioned in the docstring of twoTorsionPolynomial but not proved.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry |
25/0 |
Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Point.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Weierstrass.lean |
2 |
1 |
['github-actions'] |
nobody |
10-72828 10 days ago |
10-73425 10 days ago |
10-73413 10 days |
| 42140 |
mcdoll author:mcdoll |
feat(LinearAlgebra): use `IsApply` for `AlternatingMap` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
56/52 |
Mathlib/LinearAlgebra/Alternating/Basic.lean,Mathlib/LinearAlgebra/Alternating/DomCoprod.lean,Mathlib/LinearAlgebra/Determinant.lean,Mathlib/LinearAlgebra/Orientation.lean,Mathlib/MeasureTheory/Measure/Lebesgue/EqHaar.lean |
5 |
3 |
['github-actions', 'mcdoll'] |
nobody |
10-70620 10 days ago |
10-70620 10 days ago |
10-70608 10 days |
| 40081 |
xroblot author:xroblot |
chore(Algebra/Algebra/Subalgebra): lower priority of Module instance |
Lower the priority of `Subalgebra.instModuleSubtypeMem` from default (1000) to `low` (100).
This instance uses `inferInstance`, which re-triggers typeclass synthesis and can be expensive
to succeed. Lowering the priority makes it a fallback when cheaper paths are available.
Benchmark results show no regressions and meaningful speedups on several files
(up to -23% on `Mathlib.LinearAlgebra.TensorProduct.Subalgebra`).
:robot: Prepared with Claude Code |
t-algebra label:t-algebra$ |
1/1 |
Mathlib/Algebra/Algebra/Subalgebra/Basic.lean |
1 |
7 |
['github-actions', 'leanprover-radar', 'plp127', 'xroblot'] |
mattrobball assignee:mattrobball |
10-67877 10 days ago |
67-85667 67 days ago |
67-85697 67 days |
| 40899 |
mcdoll author:mcdoll |
feat(Data/FunLike): add `abbrev`s for pointwise multiplication |
We add `abbrev`s that provide easy access to instances that involve multiplication as a pointwise operation for `FunLike` classes. This is for example needed for `ZeroAtInftyContinuousMap`
Moreover, we
- move `NatCast` instance for `Pi` to new file `Data/Nat/Cast/Pi`
- rename `IsNatCastApply` to `IsNatCastApplyEqSMul` for the composition variant (same for `IntCast`)
- add `IsNatCast` for pointwise multiplication (same for `IntCast`)
- rename `abbrev` that apply to composition versions to `compSemiring` etc
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
335/70 |
Mathlib.lean,Mathlib/Algebra/Ring/Pi.lean,Mathlib/Data/FunLike/GroupWithZero.lean,Mathlib/Data/FunLike/IsApply.lean,Mathlib/Data/FunLike/Ring.lean,Mathlib/Data/Nat/Cast/Basic.lean,Mathlib/Data/Nat/Cast/Pi.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
8 |
4 |
['eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
10-67071 10 days ago |
10-69551 10 days ago |
45-19304 45 days |
| 39722 |
kg583 author:kg583 |
feat(Combinatorics): link `Nat.Partition` to `YoungDiagram` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
AI disclosure: Claude was used to source some proof sketches.
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
large-import
|
111/4 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Partition/Basic.lean,Mathlib/Combinatorics/Enumerative/Partition/YoungDiagram.lean,Mathlib/Combinatorics/Young/YoungDiagram.lean |
4 |
48 |
['NoahW314', 'YaelDillies', 'github-actions', 'kg583', 'wwylele'] |
nobody |
10-66968 10 days ago |
31-83557 31 days ago |
66-78462 66 days |
| 40534 |
mcdoll author:mcdoll |
feat(Algebra): introduce notation typeclass for composition of functions |
This PR defines two new typeclasses: `FComp` and `IsCompApply`. The former is just a notation typeclass with notation `(g ∘ᶠ f)` and the second one asserts that `(g ∘ᶠ f) x = g (f x)`.
---
There are two PRs that illustrate the use of these classes: #41169 and #41224
The second one is closer to what we actually implement here, but not sorry-free (because I ran into unrelated defeq abuse pretty far down the line)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
106/15 |
Mathlib/Algebra/Notation/Defs.lean,Mathlib/Algebra/SkewMonoidAlgebra/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Data/FunLike/IsApply.lean,Mathlib/Geometry/Manifold/GroupLieAlgebra.lean,Mathlib/Geometry/Manifold/VectorField/LieBracket.lean,Mathlib/NumberTheory/Height/Basic.lean,Mathlib/Probability/Distributions/Gaussian/HasGaussianLaw/Independence.lean,Mathlib/RingTheory/Coalgebra/Basic.lean,Mathlib/Topology/VectorBundle/Hom.lean |
10 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
10-66787 10 days ago |
10-69794 10 days ago |
29-53738 29 days |
| 31595 |
astrainfinita author:astrainfinita |
chore: redefine `Ideal.IsPrime` |
Redefine `Ideal.IsPrime` to make it correct for non-commutative cases
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
383/111 |
Mathlib/Algebra/Order/Ring/Ordering/Defs.lean,Mathlib/RingTheory/DedekindDomain/Ideal/Lemmas.lean,Mathlib/RingTheory/GradedAlgebra/Homogeneous/Maps.lean,Mathlib/RingTheory/GradedAlgebra/Radical.lean,Mathlib/RingTheory/Ideal/AssociatedPrime/Basic.lean,Mathlib/RingTheory/Ideal/Maps.lean,Mathlib/RingTheory/Ideal/Maximal.lean,Mathlib/RingTheory/Ideal/MinimalPrime/Noetherian.lean,Mathlib/RingTheory/Ideal/Oka.lean,Mathlib/RingTheory/Ideal/Operations.lean,Mathlib/RingTheory/Ideal/Over.lean,Mathlib/RingTheory/Ideal/Pointwise.lean,Mathlib/RingTheory/Ideal/Prime.lean,Mathlib/RingTheory/Ideal/Prod.lean,Mathlib/RingTheory/Ideal/Quotient/Basic.lean,Mathlib/RingTheory/Ideal/Quotient/Operations.lean,Mathlib/RingTheory/IsPrimary.lean,Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/Localization/Ideal.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/PrincipalIdealDomain.lean,Mathlib/RingTheory/Spectrum/Prime/Topology.lean,Mathlib/RingTheory/Valuation/Basic.lean,Mathlib/RingTheory/Valuation/ValuativeRel/Basic.lean |
24 |
34 |
['alreadydone', 'artie2000', 'astrainfinita', 'erdOne', 'github-actions', 'leanprover-bot', 'leanprover-radar', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
kim-em assignee:kim-em |
10-66223 10 days ago |
10-76501 10 days ago |
70-58630 70 days |
| 40764 |
seewoo5 author:seewoo5 |
feat(ModularForm): ramanujan-serre derivative maps modular form |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
...to modular form. Originated from sphere packing project (see [here](https://github.com/thefundamentaltheor3m/Sphere-Packing-Lean/blob/main/SpherePacking/ModularForms/Derivative.lean)). It works for any level that is a subgroup of SL2Z.
Claude is used to migrate and cleanup proofs.
- [x] depends on: #36963
- [x] depends on: #40765
[](https://gitpod.io/from-referrer/)
|
t-number-theory
LLM-generated
sphere-packing
|
70/2 |
Mathlib/NumberTheory/ModularForms/Derivative.lean |
1 |
9 |
['CBirkbeck', 'MichaelStollBayreuth', 'github-actions', 'loefflerd', 'mathlib-dependent-issues', 'seewoo5'] |
nobody |
10-65437 10 days ago |
32-56123 32 days ago |
32-56111 32 days |
| 42136 |
mitchell-horner author:mitchell-horner |
feat(Combinatorics/SimpleGraph): API for `labelledCopyCount` |
Add API for `SimpleGraph.labelledCopyCount`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
63/1 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean |
1 |
1 |
['github-actions'] |
nobody |
10-62409 10 days ago |
11-25942 11 days ago |
11-25930 11 days |
| 42153 |
Whysoserioushah author:Whysoserioushah |
feat(LinearAlgebra/Projectivization/PSL): the general case of PSL |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
LLM-generated
|
328/20 |
Mathlib.lean,Mathlib/GroupTheory/Subgroup/Center.lean,Mathlib/LinearAlgebra/Matrix/SpecialLinearGroup.lean,Mathlib/LinearAlgebra/Projectivization/Action.lean,Mathlib/LinearAlgebra/Projectivization/PSL/PSL2.lean,Mathlib/LinearAlgebra/Projectivization/PSL/PSLn.lean,Mathlib/LinearAlgebra/Projectivization/PSL/Stabilizer.lean |
7 |
3 |
['github-actions', 'mathlib-bors'] |
nobody |
10-58427 10 days ago |
11-8509 11 days ago |
11-8520 11 days |
| 42166 |
NoahW314 author:NoahW314 |
chore(Algebra): remove references to `NoZeroSMulDivisors` |
Follow-up to #30563 and #33873. Removes references to `NoZeroSMulDivisors` in places where it no longer appears, and renames some lemmas which now use `IsTorsionFree` instead of `NoZeroSMulDivisors`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
16/8 |
Mathlib/Algebra/Module/Torsion/Basic.lean,Mathlib/Algebra/Polynomial/Roots.lean,Mathlib/RingTheory/AdjoinRoot.lean,Mathlib/RingTheory/IsAdjoinRoot.lean,Mathlib/RingTheory/Support.lean |
5 |
1 |
['github-actions'] |
nobody |
10-55170 10 days ago |
10-56626 10 days ago |
10-56614 10 days |
| 41184 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): more basic API for κ-filtered categories |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
23/0 |
Mathlib/CategoryTheory/Presentable/IsCardinalFiltered.lean |
1 |
5 |
['github-actions', 'joelriou', 'smorel394'] |
robin-carlier assignee:robin-carlier |
10-53186 10 days ago |
38-37069 38 days ago |
38-37057 38 days |
| 33434 |
astrainfinita author:astrainfinita |
chore: redefine `Finsupp.indicator` using `Finsupp.onFinset` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
6/17 |
Mathlib/Data/Finsupp/Indicator.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
10-51085 10 days ago |
10-53193 10 days ago |
16-26044 16 days |
| 42168 |
astrainfinita author:astrainfinita |
chore(Algebra/Order/GroupWithZero): deprecate unnecessary lemmas |
This PR deprecates three lemmas with exactly the same statements as lemmas deprecated in #22353:
* `mul_lt_one_of_nonneg_of_lt_one_left`
* `mul_lt_one_of_nonneg_of_lt_one_right`
* `mul_le_one₀`
In addition, `mul_le_one₀` only covers the case where the right factor is nonnegative, while there is no corresponding lemma for the case where the left factor is nonnegative. This PR also adds `Bound.mul_le_one` to handle both cases.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-order
label:t-algebra$ |
46/32 |
Counterexamples/NowhereDifferentiable.lean,Mathlib/Algebra/Order/GroupWithZero/Basic.lean,Mathlib/Algebra/Order/Interval/Set/Instances.lean,Mathlib/Algebra/Order/Ring/GeomSum.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/Basic.lean,Mathlib/Analysis/Complex/Trigonometric.lean,Mathlib/Analysis/Convex/Between.lean,Mathlib/Analysis/Convex/Gauge.lean,Mathlib/Analysis/LocallyConvex/BalancedCoreHull.lean,Mathlib/Analysis/Normed/Field/UnitBall.lean,Mathlib/Analysis/Real/Pi/Irrational.lean,Mathlib/Combinatorics/SimpleGraph/Density.lean,Mathlib/NumberTheory/Padics/Hensel.lean,Mathlib/NumberTheory/Padics/PadicIntegers.lean,Mathlib/Topology/UnitInterval.lean |
15 |
1 |
['github-actions'] |
nobody |
10-43581 10 days ago |
10-45968 10 days ago |
10-48493 10 days |
| 41828 |
archiebrowne author:archiebrowne |
feat(RingTheory/HopfAlgebra/Convolution): add `ofAntipodeOfAdjoin` |
Adds `HopfAlgebra.ofAntipodeOfAdjoin`, which upgrades a bialgebra `A` to a Hopf
algebra given an algebra anti-homomorphism `S : A →ₐ[R] Aᵐᵒᵖ` that satisfies the
two antipode identities *only on a generating set* `X` with `adjoin R X = ⊤`.
Main additions (`Mathlib/RingTheory/HopfAlgebra/Basic.lean`):
* `HopfAlgebra.mul_antipode_rTensor_comul_adjoin_top` /
`HopfAlgebra.mul_antipode_lTensor_comul_adjoin_top`: the antipode axioms hold on
all of `A` when they hold on a generating set.
* `HopfAlgebra.ofAntipodeOfAdjoin`: the resulting `HopfAlgebra R A` structure,
with `antipode := (opLinearEquiv R).symm.toLinearMap ∘ₗ S.toLinearMap`.
Also in (`Mathlib/RingTheory/HopfAlgebra/Convolution.lean`):
* Golf `antipode_mul_id`, `id_mul_antipode`, and `antipode_id_cancel`.
* Add `id_antipode_cancel` (mirror of `antipode_id_cancel`). |
t-ring-theory
new-contributor
|
89/9 |
Mathlib/RingTheory/HopfAlgebra/Convolution.lean |
1 |
2 |
['github-actions'] |
nobody |
10-43416 10 days ago |
22-3294 22 days ago |
22-4324 22 days |
| 40651 |
Scarlett-le author:Scarlett-le |
feat: signed power of a point and dimension-free power-of-a-point converses |
This PR reworks the converse direction of the power of a point in `Mathlib/Geometry/Euclidean/Sphere/Power.lean` to be dimension-free, and adds the converse of the intersecting secants theorem.
Main additions:
* `Sphere.inner_vsub_vsub_eq_power`: the signed power `⟪a -ᵥ p, b -ᵥ p⟫` of a point
`p` on a secant line through `a, b ∈ s` is exactly `s.power p`; this unifies the
chord and secant cases without splitting on the sign.
* `Sphere.mem_of_inner_vsub_vsub_eq_power_of_mem_line`: a one-secant converse.
* `cospherical_of_inner_vsub_eq_inner_vsub`: a dimension-free converse to the power
of a point, stated with the signed invariant.
* `cospherical_of_mul_dist_eq_mul_dist_of_angle_eq_zero`: the converse of the
intersecting secants theorem (new).
Main change:
* `cospherical_of_mul_dist_eq_mul_dist_of_angle_eq_pi` (converse of the intersecting
chords theorem) is reproved via `cospherical_of_inner_vsub_eq_inner_vsub`, going
through the circumsphere of the triangle `{p₁, p₂, p₃}`. It no longer reduces to
the 2D case, so the `[Fact (finrank ℝ V = 2)]` / `[Module.Oriented ℝ V (Fin 2)]`
machinery, the private auxiliary lemma, and the `AffineIsometry` embedding into the
affine span are all removed. The statement is unchanged.
Imports `Mathlib.Geometry.Euclidean.Angle.Sphere` and
`Mathlib.Geometry.Euclidean.Similarity` are dropped; `Mathlib.Geometry.Euclidean.Circumcenter`
is added. |
t-euclidean-geometry
tech debt
|
139/92 |
Mathlib/Geometry/Euclidean/Angle/Unoriented/Affine.lean,Mathlib/Geometry/Euclidean/Sphere/Power.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
10-39211 10 days ago |
10-39781 10 days ago |
10-39790 10 days |
| 42131 |
joelriou author:joelriou |
feat(Geometry/Convex): a topology on StdSimplex |
In this PR, we define a topology on the standard simplex `StdSimplex R M`. When `M` is finite, this is the topology that is induced by the embedding `StdSimplex R M → (M → R)`. In general, we use the supremum of the coinduced topologies for the maps `StdSimplex.map f : StdSimplex R ι → StdSimplex R M` where `f : ι → M` is a map from a finite set `ι`.
---
This is different from the topology proposed in #40176.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry |
272/1 |
Mathlib.lean,Mathlib/Algebra/BigOperators/Finsupp/Basic.lean,Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Geometry/Convex/ConvexSpace/Defs.lean,Mathlib/Geometry/Convex/ConvexSpace/Topology.lean,Mathlib/LinearAlgebra/Vandermonde.lean |
7 |
1 |
['github-actions'] |
nobody |
10-32160 10 days ago |
10-47229 10 days ago |
11-13088 11 days |
| 42081 |
xroblot author:xroblot |
chore(RingTheory/Ideal/Quotient): split HasFiniteQuotients into Basic and Norm |
Split `HasFiniteQuotients.lean` into `Basic.lean` and `Norm.lean`. The file `Basic.lean` does not depend on `Ideal.absNorm`, thus `AbsNorm` can import the class (needed for the upcoming generalization of `Ideal.absNorm`, see #42048).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
213/176 |
Mathlib.lean,Mathlib/NumberTheory/NumberField/Cyclotomic/Galois.lean,Mathlib/NumberTheory/NumberField/ExistsRamified.lean,Mathlib/NumberTheory/RamificationInertia/HilbertTheory.lean,Mathlib/NumberTheory/RamificationInertia/Unramified.lean,Mathlib/RingTheory/Ideal/Quotient/HasFiniteQuotients.lean,Mathlib/RingTheory/Ideal/Quotient/HasFiniteQuotients/Basic.lean,Mathlib/RingTheory/Ideal/Quotient/HasFiniteQuotients/Norm.lean |
8 |
1 |
['github-actions'] |
nobody |
10-31344 10 days ago |
13-40378 13 days ago |
13-40366 13 days |
| 41718 |
riccardobrasca author:riccardobrasca |
feat: add Bernoulli.dvd_den_bernoulli and related lemmas |
Let `p` be a prime and `k` a positive even integer divisible by `p-1`. We add various results about the divisibility by `p` of the numerator and denominator of the `k`-th Bernoulli number.
These results are important to build the `p`-adic zeta function.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
91/16 |
Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/Algebra/Order/GroupWithZero/Canonical.lean,Mathlib/NumberTheory/Bernoulli.lean,Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/NumberTheory/Padics/ValuativeRel.lean,Mathlib/NumberTheory/RatFunc/Ostrowski.lean,Mathlib/RingTheory/MvPowerSeries/Inverse.lean,Mathlib/RingTheory/PowerSeries/Inverse.lean,Mathlib/RingTheory/Valuation/Discrete/Basic.lean,Mathlib/RingTheory/Valuation/Discrete/IsDiscreteValuationRing.lean,Mathlib/RingTheory/Valuation/DiscreteValuativeRel.lean |
12 |
9 |
['github-actions', 'loefflerd', 'riccardobrasca'] |
loefflerd assignee:loefflerd |
10-24765 10 days ago |
10-27280 10 days ago |
17-32638 17 days |
| 42182 |
gasparattila author:gasparattila |
feat(Order/Partition): converting a `Finpartition` into a `Partition` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
large-import
|
60/3 |
Mathlib/Order/Partition/Basic.lean,Mathlib/Order/Partition/Finpartition.lean,Mathlib/Order/SupIndep.lean |
3 |
1 |
['github-actions'] |
nobody |
10-23250 10 days ago |
10-25422 10 days ago |
10-25410 10 days |
| 40416 |
sparckix author:sparckix |
feat(Order/Monotone): add diagonal subsequence extraction |
This PR adds a small diagonal extraction lemma for nested strictly monotone subsequences of `Nat`.
Given strict-mono maps `φ k : Nat -> Nat` such that each `φ (k + 1)` factors through `φ k` by a strict-mono map `τ k`, the diagonal sequence `fun n => φ n n` is strictly monotone and each tail of the diagonal factors through the corresponding `φ k` by a strict-mono map.
The lemma is intended as a reusable sequence/order fact and is placed near `Nat.exists_strictMono_subsequence`.
Local checks run:
```text
lake env lean Mathlib/Order/Monotone/Basic.lean
lake build Mathlib.Order.Monotone.Basic
lake exe lint-style Mathlib/Order/Monotone/Basic.lean
git diff --check
```
AI assistance disclosure: I used AI tools, including Codex and external model feedback, to help extract and review this small lemma from a local formalization project. I have checked the statement and proof myself and am responsible for the submitted code.
|
t-order
new-contributor
LLM-generated
|
66/0 |
Mathlib/Order/Monotone/Basic.lean |
1 |
3 |
['github-actions', 'pepamontero'] |
nobody |
10-17749 10 days ago |
59-12507 59 days ago |
59-12495 59 days |
| 42079 |
JX-Mo author:JX-Mo |
refactor(RepresentationTheory): weaken condition of Schur's lemma |
Replace the condition `[FiniteDimensional k V]` of Schur's lemma by `[FiniteDimensional k (IntertwiningMap ρ ρ)]`. Note that the former will automatically give the latter by typeclass inference.
This has an immediate downstream application: irreducible admissible smooth representations (of e.g. GL2(Qp)) are usually not finite dimensional but the weaker condition`[FiniteDimensional k (IntertwiningMap ρ ρ)]` can be easily deduced from the definition of being "irreducible admissible smooth". |
new-contributor
t-algebra
label:t-algebra$ |
16/14 |
Mathlib/RepresentationTheory/AlgebraRepresentation/Basic.lean,Mathlib/RepresentationTheory/Irreducible.lean |
2 |
6 |
['JX-Mo', 'Whysoserioushah', 'github-actions', 'pepamontero'] |
nobody |
10-17651 10 days ago |
13-55688 13 days ago |
13-55676 13 days |
| 42179 |
FrankieNC author:FrankieNC |
chore(Logic): remove all `backward.isDefEq.respectTransparency` and `backward.defeqAttrib` options |
This removes all remaining `backward.isDefEq.respectTransparency` (and `.types`) options from `Mathlib/Logic`, as well as the two `backward.defeqAttrib.useBackward` ones. Most were stale and could just be deleted.
Three proofs needed actual fixing: `uniqueEmbeddingEquivResult` and `image_symm_preimage` now avoid unfolding through the coercions, and in the `sigmaSigmaSubtype` section it suffices to add `subtypeEquiv` to the local simp set (this also gives `sigmaSigmaSubtype_apply` a nicer form, and makes the `defeqAttrib` options unneeded).
The simps lemmas of `ofPreimageEquiv` change shape slightly; their only user, `HomOrthogonal.lean`, is unaffected. |
tech debt
t-logic
|
10/33 |
Mathlib/Logic/Embedding/Set.lean,Mathlib/Logic/Equiv/Basic.lean,Mathlib/Logic/Equiv/Embedding.lean,Mathlib/Logic/Equiv/Fin/Basic.lean,Mathlib/Logic/Equiv/Fintype.lean,Mathlib/Logic/Equiv/Option.lean,Mathlib/Logic/Equiv/Set.lean,Mathlib/Logic/Small/Defs.lean |
8 |
10 |
['FrankieNC', 'felixpernegger', 'github-actions'] |
nobody |
10-7387 10 days ago |
10-25077 10 days ago |
10-28421 10 days |
| 42023 |
lakesare author:lakesare |
feat(Topology/Instances/AddCircle/Defs): add liftIco_coe_apply_of_periodic, liftIoc_coe_apply_of_periodic (5 more lemmas) |
**Upstreaming from Carleson: [/Carleson/ToMathlib/Topology/Instances/AddCircle/Defs.lean](https://github.com/fpvandoorn/carleson/blob/master/Carleson/ToMathlib/Topology/Instances/AddCircle/Defs.lean)**
___
### Changes from carleson
- **liftIco_coe_apply_of_periodic**
- `(a : 𝕜)` => `{a : 𝕜}` (to comply with already-present variables)
- **liftIoc_coe_apply_of_periodic**, **liftIco_coe_apply_of_periodic**
- `(x : 𝕜)` => `{x : 𝕜}` (to look like surrounding lemmas)
- **liftIco_coe_apply_of_periodic**, **liftIoc_coe_apply_of_periodic**
- refactor
- **liftIco_eq_liftIco**, **liftIoc_eq_liftIoc**, **liftIco_eq_liftIoc**
- `(a' : 𝕜)` => `{a': k}` (for consistency with the existing argument `{a : 𝕜}`)
### Note
There is a comment in the Carleson file suggesting renaming `liftIco_coe_apply_of_periodic`, `liftIoc_coe_apply_of_periodic`, `liftIco_coe_apply`, and `liftIoc_coe_apply` together ([here](https://github.com/fpvandoorn/carleson/blob/master/Carleson/ToMathlib/Topology/Instances/AddCircle/Defs.lean#L27)), but the intended names are not specified. In my mind the names are already fine, so I didn't change them. |
carleson
t-topology
|
34/0 |
Mathlib/Topology/Instances/AddCircle/Defs.lean |
1 |
4 |
['github-actions', 'lakesare', 'mathlib-bors'] |
nobody |
10-3022 10 days ago |
10-4320 10 days ago |
10-4577 10 days |
| 41983 |
marcelolynch author:marcelolynch |
fix(cache): avoid misleading message on refs not built "on purpose" |
`cache get` on a fork printed a "no cache found for HEAD" note whenever the per-SHA fork marker was absent, even when every file was then served from mathlib's master cache — which is always the case for a tooling-only PR (its CI build stages zero files, so the upload job and the marker are skipped by design). Reported in https://github.com/leanprover-community/mathlib4/pull/41707#discussion_r3602459565.
The note is now printed after the download rounds and only when files are actually missing; `cache query`'s no-result message names both possible causes (CI hasn't built the commits, or its builds had nothing fork-specific to upload) instead of claiming the first.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
CI |
202/86 |
Cache/Main.lean,Cache/Query.lean,Cache/Requests.lean,Cache/Test.lean,Cache/Warning.lean |
5 |
1 |
['github-actions'] |
nobody |
10-2836 10 days ago |
10-3437 10 days ago |
10-3425 10 days |
| 42171 |
YaelDillies author:YaelDillies |
chore: don't inductively define sets |
Instead define them as `Set.ofPred` of inductively-defined predicates. This avoids abusing the defeq `Set α := α → Prop`. In cases where the set was barely used, I have inlined the definition instead.
Generated by Claude Opus, then reviewed and cherry-picked line-by-line by myself.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
LLM-generated
|
98/66 |
Mathlib/Combinatorics/Hindman.lean,Mathlib/Computability/EpsilonNFA.lean,Mathlib/Data/Set/Constructions.lean,Mathlib/LinearAlgebra/Projectivization/Subspace.lean,Mathlib/MeasureTheory/PiSystem.lean,Mathlib/MeasureTheory/SetAlgebra.lean,Mathlib/Topology/Category/Compactum.lean |
7 |
5 |
['YaelDillies', 'felixpernegger', 'github-actions', 'grunweg'] |
nobody |
9-80878 9 days ago |
10-43677 10 days ago |
10-43665 10 days |
| 42204 |
grunweg author:grunweg |
chore(Geometry/Manifold/IsManifold/InteriorBoundary): golf a proof |
Noticed in passing when self-reviewing #42034.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
easy
|
1/4 |
Mathlib/Geometry/Manifold/IsManifold/InteriorBoundary.lean |
1 |
1 |
['github-actions'] |
nobody |
9-78640 9 days ago |
9-79636 9 days ago |
9-79624 9 days |
| 40905 |
xroblot author:xroblot |
feat(FieldTheory): the compositum of two abelian extensions is abelian |
This adds:
* `AlgEquiv.ker_restrictNormalHom`: the kernel of the restriction homomorphism
`Gal(K₁/F) →* Gal(E/F)` is the fixing subgroup of the image of `E` in `K₁`.
* `IntermediateField.restrictNormalHomSupProd`: the embedding
`Gal(↑(K ⊔ L)/F) →* Gal(K/F) × Gal(L/F)`, `σ ↦ (σ|_K, σ|_L)`, for normal `K`, `L`.
* `IsAbelianGalois.sup`: the compositum of two abelian extensions is abelian.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
63/0 |
Mathlib/FieldTheory/Galois/Abelian.lean,Mathlib/FieldTheory/Galois/Basic.lean |
2 |
5 |
['github-actions', 'tb65536', 'xroblot'] |
nobody |
9-72525 9 days ago |
43-43486 43 days ago |
43-43500 43 days |
| 42152 |
plp127 author:plp127 |
feat(FieldTheory): typeclass for field extension with finite transcendence degree |
Make a new typeclass for field extensions with finite transcendence degree. See [Zulip](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/typeclass.20for.20finite.20transcendence.20basis/near/612845827).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
105/1 |
Mathlib.lean,Mathlib/FieldTheory/FinTrdeg.lean,Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean,Mathlib/RingTheory/AlgebraicIndependent/TranscendenceBasis.lean |
4 |
5 |
['github-actions', 'plp127', 'vihdzp'] |
nobody |
9-72165 9 days ago |
11-12410 11 days ago |
11-12398 11 days |
| 41678 |
JX-Mo author:JX-Mo |
refactor(RepresentationTheory): record the concrete binary biproduct |
Record the concrete binary biproduct explicitly from the instance `HasBinaryBiproducts` to make its _**proof**_ reusable. This strengthens the exposed mathematical statement from "_the biproduct exists_" to "_the biproduct exists and is isomorphic to_ `prod _ _`".
This has an immediate downstream application: to prove that the property of being smooth is stable under product, we need to reconstruct the "product". The current instance `HasBinaryBiproducts` only tells that the product exists and the information about how the product looks like is not directly available, so now we need to reprove that `prod` is a concrete categorical (bi)product. This PR aims to eliminate such future duplicated proofs. |
t-algebra
new-contributor
label:t-algebra$ |
23/7 |
Mathlib/RepresentationTheory/Rep/Basic.lean |
1 |
9 |
['JX-Mo', 'Whysoserioushah', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
9-68370 9 days ago |
9-69002 9 days ago |
25-29480 25 days |
| 31768 |
Thmoas-Guan author:Thmoas-Guan |
feat(Homology): `Ext` under restrict scalars by `RingEquiv` |
In this PR, we proved that `Ext` commute with ulift functor in `ModuleCat`.
Further more, we provided compatibility with (semi-)linear equiv of general universe.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39133
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-category-theory
label:t-algebra$ |
97/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/ChangeOfRings.lean,Mathlib/Algebra/Category/ModuleCat/Ext/RingEquiv.lean |
3 |
31 |
['Thmoas-Guan', 'dagurtomas', 'github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
joelriou assignee:joelriou |
9-67877 9 days ago |
57-56668 57 days ago |
79-14208 79 days |
| 39553 |
Brian-Nugent author:Brian-Nugent |
feat(Algebra/CategoryTheory/ModuleCat): Locally Free is local |
We define `SheafOfModules.LocalGeneratorsData.bind` just like `SheafOfModules.QuasicoherentData.bind` and use it to show that being locally free is a local condition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39544
- [ ] depends on: #39399
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
61/4 |
Mathlib/Algebra/Category/ModuleCat/Sheaf/Generators.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/LocallyFree.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Quasicoherent.lean |
3 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
ocfnash assignee:ocfnash |
9-67876 9 days ago |
61-2017 61 days ago |
61-8563 61 days |
| 40328 |
xroblot author:xroblot |
feat(FieldTheory/IntermediateField): add PowerBasis.ofAdjoinSimpleEqTop |
Adds `PowerBasis.ofAdjoinSimpleEqTop`, the `IntermediateField.adjoin` analogue of the
existing `PowerBasis.ofAdjoinEqTop` (which uses `Algebra.adjoin`): if `α` generates `L`
over `K` (i.e. `K⟮α⟯ = ⊤`) and is integral over `K`, then `α` defines a `PowerBasis`
for `L` over `K`.
The declaration is placed in `Mathlib.FieldTheory.IntermediateField.Adjoin.Basic`
(alongside `adjoin.powerBasis` and `adjoin.finrank`) rather than `Adjoin.Algebra`,
since its proof uses `adjoin.powerBasis` and `PowerBasis.map`.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
18/0 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean |
1 |
1 |
['github-actions'] |
ocfnash assignee:ocfnash |
9-67875 9 days ago |
61-15967 61 days ago |
61-16197 61 days |
| 40400 |
seewoo5 author:seewoo5 |
feat(Algebra/Order/Floor): hermite identity for floor function |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[Hermite's identity](https://en.wikipedia.org/wiki/Hermite%27s_identity) for floor function. Usually stated over real numbers, but it also holds for "floor field". Initially done by Claude Opus 4.7, and later golfed by myself. Proved as a part of personal project.
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
75/0 |
Mathlib.lean,Mathlib/Algebra/Order/Floor/Hermite.lean |
2 |
7 |
['b-mehta', 'github-actions', 'seewoo5', 'themathqueen'] |
ocfnash assignee:ocfnash |
9-67874 9 days ago |
58-58709 58 days ago |
59-28932 59 days |
| 40665 |
Yu-Misaka author:Yu-Misaka |
feat(RepresentationTheory): the character values of a finite group are algebraic integers |
Zulip link: [#Is there code for X? > Integrality of character](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Integrality.20of.20character/with/603655189)
The proof comes from Seed Prover (lean-eval) and was golfed by me.
Co-authored-by: @GanjinZero
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41242
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
16/3 |
Mathlib/RepresentationTheory/Character.lean |
1 |
14 |
['Yu-Misaka', 'bwangpj', 'copilot-pull-request-reviewer', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'tb65536', 'yuanyi-350'] |
ocfnash assignee:ocfnash |
9-67872 9 days ago |
35-62895 35 days ago |
51-82877 51 days |
| 40700 |
YaelDillies author:YaelDillies |
feat(FieldTheory): generalise `Separable.of_algHom` |
From BrauerGroup
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
12/19 |
Mathlib/FieldTheory/Separable.lean |
1 |
3 |
['Multramate', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts'] |
ocfnash assignee:ocfnash |
9-67871 9 days ago |
23-45155 23 days ago |
51-14358 51 days |
| 33247 |
sun123zxy author:sun123zxy |
feat(Mathlib/RingTheory/Ideal/Cotangent): dimension of cotangent spaces |
It is shown that the span rank of the maximal ideal of a local ring equals the dimension of the cotangent space
if the maximal ideal is finitely generated.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #33359
- [ ] depends on: #33361
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-ring-theory
|
39/0 |
Mathlib/RingTheory/Ideal/Cotangent.lean |
1 |
16 |
['erdOne', 'github-actions', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'sun123zxy', 'vlad902'] |
nobody |
9-66974 9 days ago |
30-84861 30 days ago |
65-20360 65 days |
| 42188 |
arcaputo3 author:arcaputo3 |
feat(Combinatorics/SimpleGraph): the line graph signature identity |
For a finite simple graph `G` with `n` vertices and `m` edges, we prove the classical identity
`s(A(L(G))) = n - m + p - q`
where `s` is the signature of the (real) adjacency matrix of the line graph `L(G)`, and `(p, q)` are the numbers of positive/negative eigenvalues of `Q(G) - 2•1`, with `Q(G) = D(G) + A(G)` the signless Laplacian, all counted with multiplicity.
The proof is the Gram-pairing argument: the `V × E(G)` incidence matrix `B` satisfies `Bᵀ * B = A(L(G)) + 2•1` and `B * Bᵀ = Q(G)`, and the two products have equal nonzero spectra by `Matrix.charpoly_mul_comm'`. Eigenvalue counts are transported along the resulting root-multiset identity.
New declarations:
- `Mathlib/Analysis/Matrix/Inertia.lean`: the inertia indices `Matrix.IsHermitian.posInertia` / `negInertia` / `signature` of a real symmetric matrix, and `Matrix.IsHermitian.charpoly_add_smul_one` / `roots_charpoly_add_smul_one` (the characteristic polynomial of `A + c • 1` splits over the shifted eigenvalues).
- `Mathlib/Combinatorics/SimpleGraph/LineGraphSignature.lean`: `SimpleGraph.signlessLapMatrix`, `SimpleGraph.edgeIncMatrix` (the `V × E(G)`-indexed incidence matrix) together with the two Gram identities above (stated over an arbitrary (non-assoc) semiring), a `DecidableRel` instance for `lineGraph.Adj`, and the main theorem `SimpleGraph.signature_adjMatrix_lineGraph`.
---
**AI disclosure** (per the mathlib policy on AI-assisted contributions): this PR was formalized end-to-end with Claude Code (Anthropic model Claude Fable 5). The choice of statement and the decision to contribute are mine; the Lean proofs were authored by the tool and verified by compilation. `#print axioms SimpleGraph.signature_adjMatrix_lineGraph` reports `[propext, Classical.choice, Quot.sound]`.
Notes for reviewers:
- `signlessLapMatrix` could alternatively live in `Mathlib/Combinatorics/SimpleGraph/LapMatrix.lean`, and the `DecidableRel G.lineGraph.Adj` instance in `LineGraph.lean`; happy to move them.
- The inertia API is deliberately minimal (what the main theorem needs); extensions (e.g. rank/inertia relations, congruence invariance / Sylvester's law) would be natural follow-ups.
- I do not yet have push access to non-master mathlib branches, so this PR comes from a fork; happy to move the branch onto the main repository once access is granted.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
|
new-contributor
LLM-generated
|
326/0 |
Mathlib.lean,Mathlib/Analysis/Matrix/Inertia.lean,Mathlib/Combinatorics/SimpleGraph/LineGraphSignature.lean |
3 |
2 |
['github-actions'] |
nobody |
9-55208 9 days ago |
10-19279 10 days ago |
10-19267 10 days |
| 41232 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): equivalence between the various definitions of sharply smaller regular cardinals |
---
- [x] depends on: #40937
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
366/16 |
Mathlib/CategoryTheory/Comma/CardinalArrow.lean,Mathlib/CategoryTheory/Presentable/Basic.lean,Mathlib/CategoryTheory/Presentable/SharplyLT/Basic.lean,Mathlib/Order/Monotone/Defs.lean |
4 |
17 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'smorel394'] |
kim-em assignee:kim-em |
9-53733 9 days ago |
21-30719 21 days ago |
33-55460 33 days |
| 41522 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): existence of longest paths/trails/cycles/circuits |
We already have the existence of a longest path/trail. This adds:
- the existence of a longest cycle/circuit
- the existence of a longest path/trail from a specific vertex
- the existence of a longest path/trail between specific endpoints
- the existence of a longest cycle/circuit at a specific vertex
---
`exists_isTrail_forall_length_le_of_pred` is the common argument that works for any predicate on trails, which is then used to prove the 10 versions mentioned above.
I know this looks a bit ugly, but taking a longest path/trail/cycle/circuit is a useful proof technique.
Also, that predicate version might be useful to get Kempe chains, although I haven't tried it.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
128/22 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean |
3 |
1 |
['github-actions'] |
nobody |
9-45859 9 days ago |
29-57728 29 days ago |
29-57716 29 days |
| 41123 |
Scarlett-le author:Scarlett-le |
feat(Geometry/Euclidean/Angle): the unoriented angle at the center in terms of the angle at the circumference |
Adds the unoriented counterpart of `Sphere.oangle_center_eq_two_zsmul_oangle` ("the angle at the
center of a circle is twice the angle at the circumference") to
`Mathlib/Geometry/Euclidean/Angle/Sphere.lean`. Since the unoriented angle at the center lies in
`[0, π]` while twice the angle at the circumference ranges over `[0, 2π]`, two lemmas are needed,
splitting at a right angle at the circumference:
- `Sphere.angle_center_eq_two_mul_angle_of_two_mul_angle_le_pi`: when twice the angle at the
circumference is at most `π`, the angle at the center equals twice it;
- `Sphere.angle_center_eq_two_pi_sub_two_mul_angle_of_pi_le_two_mul_angle`: when it is at least `π`,
the angle at the center equals `2 * π` minus twice it.
## Dependencies
- [x] depends on: #41143 |
t-euclidean-geometry |
87/3 |
Mathlib/Geometry/Euclidean/Angle/Oriented/Affine.lean,Mathlib/Geometry/Euclidean/Angle/Oriented/Basic.lean,Mathlib/Geometry/Euclidean/Angle/Sphere.lean |
3 |
13 |
['Scarlett-le', 'felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
jsm28 assignee:jsm28 |
9-42928 9 days ago |
9-42928 9 days ago |
29-38587 29 days |
| 42020 |
kebekus author:kebekus |
feat: separation lemma of Value Distribution Theory |
Begin the proof of the "Second Main Theorem of Value Distribution Theory" by establishing the classic separation lemma. The full formalized proof, which will be PRed piece by piece, is available on the internet at https://github.com/kebekus/ProjectVD
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
LLM-generated
|
146/0 |
Mathlib.lean,Mathlib/Analysis/Complex/ValueDistribution/SecondMainTheorem.lean,Mathlib/Data/Finset/Card.lean |
3 |
14 |
['github-actions', 'j-loreaux', 'kebekus'] |
nobody |
9-42075 9 days ago |
9-42112 9 days ago |
15-25006 15 days |
| 42226 |
espottesmith author:espottesmith |
feat(Combinatorics/Hypergraph): add restriction `x ≠ y` to hypergraph vertex and edge adjacency |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This introduces a small change to the definitions of adjacency and edge-adjacency for undirected hypergraphs, based on a conversation with @Jun2M and @b-mehta in [#28613](https://github.com/leanprover-community/mathlib4/pull/28613).
Previously, any two vertices (edges) `x` and `y` could be adjacent, provided that there was an edge in the edge set containing both of them (there was a vertex contained in both of them). Now, we add the restriction that `x` is not equal to `y`.
This should allow `SimpleGraph` to be a clean specialization of `Hypergraph` and to ease the eventual implementation of walks.
This PR has no dependencies, but see also [42164](https://github.com/leanprover-community/mathlib4/pull/42162), @Jun2M's implementation of `HyperGraphLike` and formalization that `Hypergraph`s are `HyperGraphLike`, which includes this restriction on `Adj`.
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
4/4 |
Mathlib/Combinatorics/Hypergraph/Basic.lean |
1 |
3 |
['github-actions'] |
nobody |
9-40120 9 days ago |
9-40686 9 days ago |
9-40674 9 days |
| 42200 |
tb65536 author:tb65536 |
feat(GroupTheory/Finiteness): add general `IsMulFG` |
This PR adds a general `IsMulFG` predicate that generalizes all four existing definitions `Monoid.FG`, `Submonoid.FG`, `Group.FG` and `Subgroup.FG`. Ultimately the plan will be to deprecate all four existing definitions in favor of `IsMulFG`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
178/0 |
Mathlib/Algebra/Group/Submonoid/Basic.lean,Mathlib/Data/Set/Finite/Basic.lean,Mathlib/GroupTheory/Finiteness.lean |
3 |
9 |
['eric-wieser', 'github-actions', 'tb65536', 'vihdzp'] |
nobody |
9-35244 9 days ago |
9-78533 9 days ago |
9-78523 9 days |
| 42231 |
mcdoll author:mcdoll |
doc(Analysis/SpecialFunctions): mention junk value for poles of Gaussian hypergeometric function |
The Gaussian hypergeometric function has a pole for `c = -k`, this is currently not mentioned at all in the file.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
6/2 |
Mathlib/Analysis/SpecialFunctions/OrdinaryHypergeometric.lean |
1 |
1 |
['github-actions'] |
nobody |
9-29556 9 days ago |
9-30137 9 days ago |
9-30125 9 days |
| 41293 |
riccardobrasca author:riccardobrasca |
feat: add WeierstrassCurve.exists_variableChange_lift |
We add `WeierstrassCurve.exists_variableChange_lift`, a variable change over the fraction field between integral Weierstrass equations descends to the
base ring if its `u` coefficient descends to a unit of the base ring.
---
A first version of the code has been generated by Claude, but it has gone through extensive review by me before opening the PR.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry |
45/0 |
Mathlib/AlgebraicGeometry/EllipticCurve/Reduction.lean |
1 |
2 |
['Multramate', 'github-actions'] |
Multramate and joelriou assignee:Multramate assignee:joelriou |
9-29470 9 days ago |
29-43057 29 days ago |
30-35047 30 days |
| 42239 |
plp127 author:plp127 |
feat(Algebra/MonoidAlgebra): add instances for `Infinite` and `Countable` and `Small` |
Add instance for `Infinite R[M]` when `Infinite R` and `Nonempty M` and when `Nontrivial R` and `Infinite M`. Also add instance for `Countable R[M]` when `Countable R` and `Countable M`. Also add instance for `Small.{w} R[M]` when `Small.{w} R` and `Small.{w} M`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
36/0 |
Mathlib/Algebra/MonoidAlgebra/Cardinal.lean |
1 |
1 |
['github-actions'] |
nobody |
9-18032 9 days ago |
9-19367 9 days ago |
9-19355 9 days |
| 42205 |
grunweg author:grunweg |
chore(Geometry/Manifold): avoid some underscore soup |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
maintainer-merge
|
13/9 |
Mathlib/Geometry/Manifold/ContMDiff/Basic.lean,Mathlib/Geometry/Manifold/HasGroupoid.lean,Mathlib/Geometry/Manifold/IsManifold/Basic.lean |
3 |
16 |
['JovanGerb', 'felixpernegger', 'github-actions', 'grunweg'] |
nobody |
9-13808 9 days ago |
9-79626 9 days ago |
9-79614 9 days |
| 36275 |
smmercuri author:smmercuri |
feat: norm for the finite adele ring of a number field |
---
- [x] depends on: #35820
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
151/3 |
Mathlib.lean,Mathlib/NumberTheory/NumberField/AdeleRing.lean,Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean,Mathlib/NumberTheory/NumberField/FiniteAdeleRing.lean,Mathlib/RingTheory/DedekindDomain/FiniteAdeleRing.lean,Mathlib/Topology/Algebra/Valued/NormedValued.lean |
6 |
5 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
9-8624 9 days ago |
15-22542 15 days ago |
71-41116 71 days |
| 40961 |
JovanGerb author:JovanGerb |
chore: remove imports added by `shake` |
This PR removes some imports that were added by `shake` in the past.
For some of these it's not clear to me why `shake` added them. In particular, I noticed some occurrences of `public import Mathlib.Tactic.NormNum.Pow`/`Inv`, where `norm_num` is not used in the file at all, which I found suspicious.
For `CompileInductive`, it is expected that `shake` keeps the import, because of `shake: keep-downstream`, so these imports need to be minimzed manually, which this PR does.
For good measure, I also fixed an issue in `Mathlib.Tactic.NormNum.Pow` that some non-meta things were marked as `meta`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
21/38 |
Mathlib/Algebra/ContinuedFractions/ConvergentsEquiv.lean,Mathlib/Algebra/Free.lean,Mathlib/Algebra/FreeMonoid/Basic.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/Algebra/Module/Submodule/Union.lean,Mathlib/Algebra/Opposites.lean,Mathlib/Algebra/Order/GroupWithZero/Basic.lean,Mathlib/Combinatorics/Enumerative/Stirling.lean,Mathlib/Combinatorics/Quiver/Path.lean,Mathlib/Combinatorics/SetFamily/AhlswedeZhang.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/ChainOfFn.lean,Mathlib/Data/List/Defs.lean,Mathlib/Data/List/Induction.lean,Mathlib/Data/List/InsertIdx.lean,Mathlib/Data/Multiset/Defs.lean,Mathlib/Data/Nat/Hyperoperation.lean,Mathlib/Data/Num/Prime.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Ordmap/Ordnode.lean,Mathlib/Data/Seq/Computation.lean,Mathlib/Data/WSeq/Basic.lean,Mathlib/Logic/Equiv/Prod.lean,Mathlib/RingTheory/Ideal/Lattice.lean,Mathlib/SetTheory/Lists.lean,Mathlib/Tactic/NormNum/Pow.lean |
27 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
9-8459 9 days ago |
9-15816 9 days ago |
38-34459 38 days |
| 40204 |
Jun2M author:Jun2M |
feat(Combinatorics): incidence-based `HypergraphLike` class |
This PR introduces incidence-based typeclasses for developing common graph theory across
`SimpleGraph`, `Graph`, `Digraph`, and more general hypergraph-like structures.
The central class, `HyperGraphLike V I E Gr`, treats incidence identifiers as primitive data.
For `G : Gr`, each incidence identifies an edge and an endpoint, and may be marked as a source or
target incidence. Links, adjacency, darts, and walks are then derived from this incidence structure.
This is an alternative to #36743, where darts and their endpoints are primitive. Keeping incidences
explicit distinguishes different incidences of the same edge at the same vertex—for example, the two incidences of a loop—and extends naturally to hypergraphs.
See discussion at ([#graph theory > HasAdj](https://leanprover.zulipchat.com/#narrow/channel/252551-graph-theory/topic/HasAdj/with/575843445)) for more information.
### Main definitions
* `HyperGraphLike`: supplies the vertex, incidence, and edge sets together with incidence, source,
target, link, and adjacency relations.
* `GraphLike`: requires every edge to have exactly two incidences, including a source and a target.
* `Undirected` and `Directed`: distinguish whether incidences may be traversed in both directions.
* `NoParallelEdge` and `Loopless`: express the usual restrictions on graph-like structures.
* `IsTraversal` and `Dart`: represent the traversal of an edge through an ordered pair of distinct
incidences.
The walk API includes constructions from darts, vertices, and edges, together with basic operations
and lemmas about lengths, visited vertices, traversed edges, incidence pairs, and reversal.
### Concrete graph types
This PR provides instances showing that:
* `SimpleGraph` is graph-like, undirected, loopless, and has no parallel edges.
* `Graph` is graph-like and undirected. Its incidence type distinguishes the two incidences of a
loop.
* `Digraph` is graph-like, directed, and has no parallel edges.
The PR also adds a small collection of supporting lemmas for `Part` and `PFun`. In particular,
`PFun.preimage_inter` is strengthened from an inclusion to an equality.
### Walk-related definitions
* `WalkData`: graph-independent walk data recording vertices, edges, and the exact incidence pair
used by each step.
* `WalkData.IsValid`: certifies that `WalkData` describes a valid walk in a particular graph.
* `Walk G u v`: packages valid walk data with specified endpoints.
Codex was used to help with writing the walk related section and reviewing the PR.
Co-authored-by: OpenAI Codex <codex@openai.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
2085/2 |
Mathlib.lean,Mathlib/Combinatorics/Digraph/GraphLike.lean,Mathlib/Combinatorics/Graph/Basic.lean,Mathlib/Combinatorics/Graph/GraphLike.lean,Mathlib/Combinatorics/GraphLike/Basic.lean,Mathlib/Combinatorics/GraphLike/Walks/Basic.lean,Mathlib/Combinatorics/GraphLike/Walks/Dart.lean,Mathlib/Combinatorics/SimpleGraph/GraphLike.lean,Mathlib/Data/PFun.lean,Mathlib/Data/Part.lean |
10 |
2 |
['github-actions'] |
b-mehta assignee:b-mehta |
9-7901 9 days ago |
10-67090 10 days ago |
63-49335 63 days |
| 42164 |
CoolRmal author:CoolRmal |
feat(MeasureTheory): one-sided continuous functions are measurable |
The following lemmas are proved in this PR:
- the image of a set of a second-countable linear order under a right-continuous function is a
separable space.
- a right continuous function is measurable.
- a right continuous function is strongly measurable.
The corresponding statements for left continuous functions are also included.
Note: the statement that a right continuous function is strongly measurable is actually true even in the case that the codomain is not assumed to be strongly measurable, and this can be proved through an explicit construction of an approximating sequence of simple functions. However, this proof is definitely more lengthy, and I believe in practice we only care about strongly measurable functions in the case of integrating banach space valued functions. This is why I decide to assume pseudometrizability so that a simpler proof is available through the use of [stronglyMeasurable_iff_measurable_separable](https://leanprover-community.github.io/mathlib4_docs/Mathlib/MeasureTheory/Function/StronglyMeasurable/Basic.html#stronglyMeasurable_iff_measurable_separable).
---
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
|
68/0 |
Mathlib/MeasureTheory/Constructions/BorelSpace/Order.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/Basic.lean,Mathlib/Topology/Order/LeftRightNhds.lean |
3 |
1 |
['github-actions'] |
nobody |
9-5261 9 days ago |
9-12291 9 days ago |
9-12279 9 days |
| 42202 |
j-loreaux author:j-loreaux |
feat: define `PositiveContinuousLinearMap` |
This PR defines the continuous version of `PositiveLinearMap` via `extend`ing this structure as well as `ContinuousLinearMap`. In the process, we also create `Is{Add,Zero,SMul}Apply` instances for `PositiveLinearMap`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
maintainer-merge
|
269/16 |
Mathlib.lean,Mathlib/Algebra/Order/Module/PositiveLinearMap.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Positive.lean |
3 |
28 |
['github-actions', 'j-loreaux', 'mcdoll', 'themathqueen'] |
nobody |
9-774 9 days ago |
9-1595 9 days ago |
9-10468 9 days |
| 42254 |
lakesare author:lakesare |
feat(Analysis/SpecialFunctions/ImproperIntegrals): add not_integrableOn_Ioi_rpow_of_neg_one_le |
From the Carleson project.
-------
**Upstreaming from Carleson: [/Carleson/ToMathlib/Analysis/SpecialFunctions/ImproperIntegrals.lean](https://github.com/fpvandoorn/carleson/blob/0072b6e47ec58ac13be0a9f3b7c17e9f3bb1be2e/Carleson/ToMathlib/Analysis/SpecialFunctions/ImproperIntegrals.lean)**
### Changes from carleson
- **generalized**
Removed `(ha : 0 ≤ a)` hypothesis
- **renamed from `theorem not_integrableOn_Ioi_rpow'` to `theorem not_integrableOn_Ioi_rpow_of_neg_one_le`**
A more descriptive name
### Signatures
```lean
-- CARLESON
not_integrableOn_Ioi_rpow' {a s : ℝ} (ha : 0 ≤ a) (hs : -1 ≤ s) : ¬IntegrableOn (fun x ↦ x ^ s) (Ioi a) volume
-- MATHLIB
not_integrableOn_Ioi_rpow_of_neg_one_le {a s : ℝ} (hs : -1 ≤ s) : ¬IntegrableOn (fun x ↦ x ^ s) (Ioi a) volume
``` |
carleson
t-analysis
easy
|
6/0 |
Mathlib/Analysis/SpecialFunctions/ImproperIntegrals.lean |
1 |
4 |
['felixpernegger', 'github-actions', 'lakesare'] |
nobody |
8-86111 8 days ago |
9-4445 9 days ago |
9-4433 9 days |
| 42195 |
Jun2M author:Jun2M |
refactor(Order/Partition): remove the support index from `Partition` |
Redefine `Partition α` as an independent collection of pairwise disjoint, nonempty sets, with its support available as `P.supp`.
Previously, `Partition s` carried its support as a type index. This made partitions of different sets inhabit different types and forced otherwise natural operations to transport partitions across support equalities.
BREAKING CHANGE: Replace the indexed type `Partition s` with `Partition α`, and obtain the former index from `P.supp`. When constructing a partition, omit the proof that the parts cover a prescribed set. `Partition.copy` and `Partition.partscopyEquiv` are no longer needed. Import the relevant `Mathlib.Order.Partition` submodule when using APIs moved out of `Basic`.
Deletions:
- Partition.copy
- Partition.mem_copy_iff
- Partition.partscopyEquiv
It also introduces some new definitions: `induce` & `bind`. These are added in this PR as they are needed to keep `SemiLattice` instance on `Partition`.
This PR is partially generated by AI: Partition API written by myself in [Matroid repo](https://github.com/apnelson1/Matroid) has be adapted using codex and final checked by myself.
Co-authored-by: OpenAI Codex <codex@openai.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
610/406 |
Mathlib.lean,Mathlib/Order/Partition/Basic.lean,Mathlib/Order/Partition/Set.lean,Mathlib/Order/SupIndep.lean |
4 |
1 |
['github-actions'] |
nobody |
8-79017 8 days ago |
8-79017 8 days ago |
8-79005 8 days |
| 42258 |
ScottCarnahan author:ScottCarnahan |
feat(Algebra/Lie/Graded): add graded Lie modules |
This PR defines graded Lie modules over graded Lie algebras. Some existing declarations are changed to be heterogeneous, so they apply to modules in addition to Lie algebras.
---
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
50/20 |
Mathlib/Algebra/Lie/Graded.lean |
1 |
1 |
['github-actions'] |
nobody |
8-75518 8 days ago |
8-85785 8 days ago |
8-85773 8 days |
| 41916 |
peabrainiac author:peabrainiac |
feat(Topology): add `Homeomorph.Set.iUnion` |
Disjoint unions of families of sets are canonically isomorphic to disjoint unions of the corresponding subtypes, provided each set in the family can be separated from the others with an open neighbourhood.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
The equivalence underlying this homeomorphism is already in mathlib as `Set.unionEqSigmaOfDisjoint`. I think that should be renamed to `Equiv.Set.iUnion` for several reasons, but doing so would touch 5 different files, so it's probably cleaner to do that in a separate PR.
[](https://gitpod.io/from-referrer/)
|
t-topology |
35/0 |
Mathlib/Topology/Homeomorph/Lemmas.lean |
1 |
7 |
['felixpernegger', 'github-actions'] |
nobody |
8-71043 8 days ago |
19-57072 19 days ago |
19-57060 19 days |
| 39663 |
Raph-DG author:Raph-DG |
feat(Topology): A spectral map between quasi-separated, prespectral sober spaces has compact fibers |
In this PR, we develop some API around the constructible topology, culminating in the fact that a spectral map between quasi-separated, prespectral sober spaces has compact fibers. To see why this might be of interest, note that the analogous theorem in algebraic geometry (that a quasiseparated map between schemes has quasicompact fibers) does not require any global separatedness assumptions, and the proof of this is very algebraic. So we have the somewhat mysterious situation that it seems as though there are nontrvial topological restrictions on the kinds of spectral maps which can be the underlying maps of morphisms of schemes.
This PR was originally part of #26304, a PR on pushforwards of algebraic cycles. This is where the notion of compactness of fibers becomes relevant, as this guarantees each coefficient of the pushforward of a cycle is computed by a finite sum.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
large-import
|
178/6 |
Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Constructible.lean,Mathlib/Topology/Defs/Induced.lean,Mathlib/Topology/Maps/Proper/Basic.lean,Mathlib/Topology/Spectral/ConstructibleTopology.lean,Mathlib/Topology/WithTopology.lean |
6 |
5 |
['Raph-DG', 'chrisflav', 'github-actions', 'j-loreaux'] |
urkud assignee:urkud |
8-67876 8 days ago |
57-22171 57 days ago |
62-6201 62 days |
| 40155 |
TheGoedeDoel author:TheGoedeDoel |
feat: functor of localized commutative rings |
Given a functor of commutative rings R and a submonoid functor S,
we add a functor of commutative rings with objects that are localizations
of R(U) at the submonoid S(U). We also show that this functor satisfies a
universal property.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
255/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/LocalizedFunctor.lean |
2 |
14 |
['TheGoedeDoel', 'chrisflav', 'github-actions'] |
riccardobrasca assignee:riccardobrasca |
8-67875 8 days ago |
56-75898 56 days ago |
65-75930 65 days |
| 40182 |
Thmoas-Guan author:Thmoas-Guan |
feat(RingTheory): add lemma for span rank of maximal ideal under surjection |
In this PR, we added the following result : for noetherian local ring `(R, m, k)`, the span rank of maximal ideal of `R/I` adding `k` dimension of `I+m^2/m^2` is equal to span rank of maximal ideal of `R`.
This would be useful when dealing with regular local ring and quotient within `m^2`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
52/0 |
Mathlib/Algebra/Module/SpanRankOperations.lean,Mathlib/RingTheory/Ideal/Cotangent.lean,Mathlib/RingTheory/LocalRing/ResidueField/Basic.lean |
3 |
1 |
['github-actions'] |
riccardobrasca assignee:riccardobrasca |
8-67874 8 days ago |
65-24403 65 days ago |
65-24391 65 days |
| 40250 |
mcdoll author:mcdoll |
feat(Dynamics): add `Homeomorph.flow` |
Define the discrete flow by iterating a homeomorphism.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #40259
[](https://gitpod.io/from-referrer/)
|
t-dynamics |
29/0 |
Mathlib/Dynamics/Flow.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
sgouezel assignee:sgouezel |
8-67873 8 days ago |
46-40506 46 days ago |
46-40494 46 days |
| 41523 |
Harmenszoon author:Harmenszoon |
feat(Analysis/SpecialFunctions): add the Chase-Lovett diagonal reduction for binEntropy |
This PR adds the two-variable entropy inequality of Chase and Lovett ([arXiv:2211.11689](https://arxiv.org/abs/2211.11689), Lemma 2.2): for `x, y ∈ [0, 1]`,
```
x * binEntropy y + y * binEntropy x ≤ 2 * sqrt (x * y) * binEntropy (sqrt (x * y))
```
in a new leaf file `Mathlib/Analysis/SpecialFunctions/BinaryEntropy/Diagonal.lean`, together with its `negMulLog (1 - ·)` half (`Real.mul_negMulLog_one_sub_add_le`) and a `private` concavity layer for the comparison function `η u = exp u * negMulLog (1 - exp (-u))`. Two entries are added to `docs/references.bib` (Chase–Lovett arXiv:2211.11689, Boppana arXiv:2301.09664).
**Motivation.** This inequality is the reusable reduction step behind the recent entropic lower bounds for Frankl's union-closed sets conjecture (Gilmer; Alweiss–Huang–Sellke; Chase–Lovett; Sawin; Boppana): it reduces two-variable inequalities of Boppana type `K * (x * h y + y * h x) ≤ h (x * y)` to one-variable inequalities `2 * K * t * h t ≤ h (t ^ 2)`. `Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean` currently contains calculus basics for `binEntropy` only, and no inequality of this family; I checked current master for collisions before opening this. A kernel-checked downstream application — a complete Lean formalization of the union-closed lower bound at the constant `(3 - √5)/2` that uses exactly this reduction — is public at https://github.com/demonstrandum-research/artifacts (the `UCFrankl` development), which I maintain.
**Proof shape** (one page of calculus): substituting `x = exp (-u)`, the inequality becomes midpoint concavity of `η` on `[0, ∞)`; the `negMulLog (x * y)` parts of the two sides cancel exactly, the `negMulLog (1 - ·)` parts transfer to `η` via the identity `x * η (-log x) = negMulLog (1 - x)`, and `η'' ≤ 0` reduces to `log t ≤ t - 1`. Stating `η` through `negMulLog` absorbs the `0 * log 0` boundary behaviour, so no separate edge-case argument is needed at `x = 1`.
**Design notes / open questions for reviewers.**
- Hypotheses are stated as `0 ≤ x`/`x ≤ 1` pairs rather than `x ∈ Set.Icc 0 1`; happy to convert if the membership form is preferred.
- The `η`-machinery is `private`; it could be exposed if judged independently useful.
- File placement: a new `BinaryEntropy/Diagonal.lean` leaf keeps the import footprint of `BinaryEntropy.lean` unchanged (the proof needs `Analysis.Convex.Deriv`); merging into the main file is also possible if preferred.
- Naming: `mul_binEntropy_add_mul_binEntropy_le` / `mul_negMulLog_one_sub_add_le` follow the conclusion-based convention but I am glad to rename.
**AI disclosure** (per the [mathlib AI policy](https://leanprover-community.github.io/contribute/index.html)): the Lean code in this PR was generated by LLM agents (Anthropic's Claude, running in an agent pipeline that I operate under the name Demonstrandum), and was then compile-verified against mathlib and reviewed by me. This PR description was also prepared with AI assistance and reviewed by me. The proof is elementary calculus as summarized above; I understand it and take full responsibility for the contribution. I am adding the `LLM-generated` label as required. The downstream `UCFrankl` development linked above (kernel-checked, axioms `[propext, Classical.choice, Quot.sound]` only) is the evidence that the lemma carries real weight in applications.
---
- [x] depends on: nothing
|
t-analysis
LLM-generated
new-contributor
|
227/0 |
Mathlib.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy/Diagonal.lean,docs/references.bib |
3 |
5 |
['Harmenszoon', 'Timeroot', 'github-actions'] |
ADedecker assignee:ADedecker |
8-67869 8 days ago |
29-55777 29 days ago |
29-55765 29 days |
| 41703 |
plp127 author:plp127 |
perf(Condensed/Light): speedup kernel typechecking of `InternalProjectivityProof.cocone` |
Speedup kernel typechecking of `InternalProjectivityProof.cocone` in `Mathlib/Condensed/Light/Sequence.lean`. `Functor.map_comp` for `lightProfiniteToLightCondSet` holds by `rfl`, but rewriting backwards with `Functor.map_comp` explicitly in `simp` makes the subsequent `rfl` faster in the kernel because it doesn't need to unfold as much. See [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/kernelbarfing.20in.20mathlib/near/609873490).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-condensed |
2/2 |
Mathlib/Condensed/Light/Sequence.lean |
1 |
5 |
['github-actions', 'grunweg', 'leanprover-radar', 'plp127'] |
dagurtomas assignee:dagurtomas |
8-67865 8 days ago |
25-9243 25 days ago |
25-9231 25 days |
| 41964 |
roos-j author:roos-j |
feat(MeasureTheory/Integral): second mean value theorem for integration |
Add second mean value theorem for integration, including an inequality variant for Banach-space valued functions.
---
This should be of general enough interest to need no justification, but as one specific application I need this as a prerequisite for appropriately generalizing the first-order case in https://github.com/leanprover-community/mathlib4/pull/39406
Some explanatory notes about the choices made. These may not belong into the documentation but we can add any subset of them if desired:
- Unlike the first mean value theorem, this one is specific to `intervalIntegral` and does not have the same natural generalization to integrals on connected sets.
- There are various formulations in the literature. In particular, there is a version featuring a one-sided limit of `f` at the endpoint on the right-hand side instead, and there is also a version without the non-negativity requirement which instead has two terms on the right-hand side. Each variant has their slight pros and cons. The present formulation is one of these and was chosen simply because it is the one most convenient for my purpose. Others can be added in the future if people need/want them.
- As is well-known, for vector-valued functions the identity generally fails, but one can show an inequality. I only need this for the complex-valued case, but I generalized it to functions taking values in a real Banach space. The argument uses the Hahn-Banach theorem and must be well-known, but I don't have a reference for it. There is of course also a version for the first mean value theorem, which is not part of this PR.
[](https://gitpod.io/from-referrer/)
|
t-analysis
t-measure-probability
|
192/5 |
Mathlib/MeasureTheory/Integral/IntervalIntegral/MeanValue.lean,docs/references.bib |
2 |
1 |
['github-actions'] |
urkud assignee:urkud |
8-67865 8 days ago |
17-63279 17 days ago |
17-63535 17 days |
| 41015 |
JovanGerb author:JovanGerb |
chore(CategoryTheory/Functor/EpiMono): use `to_dual` |
This PR uses `to_dual` to translate some declarations about `Epimorphisms` and `Monomorphisms`. Various prerequisites have also been tagged in this PR.
The namespace of some lemmas has been fixed that should have been capitalized.
A few lemmas about `Epimorphisms` didn't have a corresponding `Monomorphisms` version, so they have been added in this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
138/225 |
Mathlib/CategoryTheory/Adjunction/Basic.lean,Mathlib/CategoryTheory/EpiMono.lean,Mathlib/CategoryTheory/Functor/EpiMono.lean,Mathlib/CategoryTheory/Functor/FullyFaithful.lean,Mathlib/CategoryTheory/LiftingProperties/Adjunction.lean,Mathlib/CategoryTheory/Preadditive/Injective/Basic.lean,Mathlib/CategoryTheory/Preadditive/Projective/Internal.lean,Mathlib/Tactic/Translate/ToDual.lean |
8 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
8-64985 8 days ago |
8-68178 8 days ago |
30-24952 30 days |
| 41619 |
JovanGerb author:JovanGerb |
fix(Order/Notation): unify at correct transparency in sup/inf delaborators |
This PR fixes the `sup`/`inf` delaborators to use the correct transparency when unifying instances.
I discovered this problem when using `#click_suggestions`. It has the funny property of delaborating at the reducible transparency level instead of default (which usually doesn't affect delaboration, but in this case does)
Note: we may delay this PR until the next Lean version, since it splits this transparency level. The one we will then need is the implicit transparency.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
4/4 |
Mathlib/Order/Notation.lean |
1 |
1 |
['github-actions'] |
nobody |
8-64203 8 days ago |
27-19764 27 days ago |
27-19752 27 days |
| 42176 |
yuanyi-350 author:yuanyi-350 |
feat(RingTheory/AlgebraicIndependent): upgrade polynomial equivalence |
|
t-ring-theory |
13/26 |
Mathlib/RingTheory/AlgebraicIndependent/Basic.lean,Mathlib/RingTheory/AlgebraicIndependent/Transcendental.lean |
2 |
1 |
['github-actions'] |
nobody |
8-62097 8 days ago |
10-39832 10 days ago |
10-39820 10 days |
| 41923 |
themathqueen author:themathqueen |
feat(Algebra): `IsUnital` and `IsNotUnital` classes |
This adds Prop-type classes on multiplicative types that state whether a unit exists or not. This shouldn't really be used unless it is the only reasonable way to phrase or prove a statement.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This will be used in #36327.
Zulip thread: [#mathlib4 > `IsUnital` class](#narrow/channel/287929-mathlib4/topic/.60IsUnital.60.20class)
[](https://gitpod.io/from-referrer/)
|
t-algebra
maintainer-merge
label:t-algebra$ |
183/0 |
Mathlib/Algebra/Algebra/Defs.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Ring/Defs.lean,Mathlib/Analysis/CStarAlgebra/Classes.lean,Mathlib/Analysis/Normed/Module/Basic.lean,Mathlib/Analysis/Normed/Ring/Basic.lean |
6 |
13 |
['SnirBroshi', 'github-actions', 'j-loreaux', 'themathqueen'] |
nobody |
8-61483 8 days ago |
9-5227 9 days ago |
18-68693 18 days |
| 41918 |
CoolRmal author:CoolRmal |
feat(Topology/Order): separability is hereditary for linearly ordered topological spaces |
In this PR we prove that
1. `isTopologicalBasis_isOpen_ordConnected`: in a linearly ordered topological space, every point of an open set `U` has an open `Set.OrdConnected` neighbourhood contained in `U`.
2. `countable_setOf_isolated_subtype`: in a separable linearly ordered topological space, the points of a subset `s` that are isolated in the subspace `s` form a countable set.
3. A subset of a separable linearly ordered topological space is separable in the subspace topology. This is proved as an instance.
The material was developed for showing the measurability of the pathwise variation of a continuous stochastic process in https://github.com/RemyDegenne/brownian-motion/pull/494. Created with the help of Claude Code, carefully reviewed and golfed by myself.
|
t-topology |
153/0 |
Mathlib.lean,Mathlib/Topology/Closure.lean,Mathlib/Topology/Order/Separable.lean |
3 |
2 |
['CoolRmal', 'felixpernegger', 'github-actions'] |
nobody |
8-58514 8 days ago |
8-60279 8 days ago |
19-54735 19 days |
| 41288 |
lua-vr author:lua-vr |
feat(EReal): add_eq_top_iff_eq_top_* |
Adds `add_eq_top_iff_eq_top_{left,right}` and replaces the proofs of the `ne` versions with `.ne`. `add_ne_top_iff_of_ne_bot_of_ne_top` was duplicated, so I deprecated it.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
11/6 |
Mathlib/Data/EReal/Operations.lean |
1 |
3 |
['felixpernegger', 'github-actions', 'lua-vr'] |
nobody |
8-38717 8 days ago |
36-28821 36 days ago |
36-28809 36 days |
| 42240 |
yuanyi-350 author:yuanyi-350 |
feat(LinearAlgebra): generalize dualAnnihilator_iInf_eq to Sort |
|
t-algebra label:t-algebra$ |
5/4 |
Mathlib/LinearAlgebra/Dual/Lemmas.lean |
1 |
3 |
['github-actions', 'plp127'] |
nobody |
8-18371 8 days ago |
9-18521 9 days ago |
9-18509 9 days |
| 42223 |
cameronfreer author:cameronfreer |
feat(Computability/Reduce): the halting problem is many-one complete |
`Mathlib/Computability/Halting.lean` proves that the halting problem is recursively enumerable (`ComputablePred.halting_problem_re`) and not computable (`ComputablePred.halting_problem`), but not that it is complete: there is no `REPred R → R ≤₀ K`, and neither `Halting.lean` nor `RE.lean` mentions `≤₀`.
This PR adds three results:
```lean
theorem REPred.manyOneReducible_halting_problem {R : ℕ → Prop} (h : REPred R) (n : ℕ) :
R ≤₀ fun c : Code => (Code.eval c n).Dom
theorem halting_problem_manyOneEquiv_halting_problem₂ (n : ℕ) :
ManyOneEquiv (fun c : Code => (Code.eval c n).Dom)
(fun p : Code × ℕ => (Code.eval p.1 p.2).Dom)
theorem REPred.manyOneReducible_halting_problem₂ {R : ℕ → Prop} (h : REPred R) :
R ≤₀ fun p : Code × ℕ => (Code.eval p.1 p.2).Dom
```
(I've stated the results in `Reduce.lean` rather than alongside the other halting-problem results because `≤₀` is defined here, and `Reduce` imports `Halting` rather than the other way around.)
🤖 These proofs were written with the assistance of Claude Opus 5 high and reviewed by GPT Sol 5.6 xhigh.
|
t-computability
new-contributor
LLM-generated
|
41/0 |
Mathlib/Computability/Reduce.lean |
1 |
3 |
['cameronfreer', 'github-actions'] |
nobody |
8-16809 8 days ago |
9-44617 9 days ago |
9-44605 9 days |
| 42189 |
cameronfreer author:cameronfreer |
feat(ModelTheory/Basic): add characterization of languages with countably many symbols |
`Language.Countable.countable_functions` currently projects `Countable L.Symbols` onto the function symbols, but there is no counterpart for relations. This PR adds the missing instance; in doing so it relates the two ways that Mathlib already expresses "countable language": the bundled `Language.card ≤ ℵ₀` and the unbundled `Countable (Σ l, L.Functions l)` / `Countable (Σ l, L.Relations l)` hypotheses that model-theoretic statements tend to carry separately.
* `Countable.countable_relations`, `countable_symbols_iff`, and `card_le_aleph0_iff_countable` connect the bundled and unbundled formulations of symbol countability.
* `Countable.countable_sum`, `Countable.countable_constantsOn`, and `Countable.countable_withConstants` centralize countability instances for language constructors and remove the corresponding local instances from `Encoding.lean`.
## Motivation
Following review feedback from @NoneMore, this PR now also simplifies existing Mathlib code: generic countability instances for `Language.sum`, `constantsOn`, and `withConstants` live beside those constructors, so `Encoding.lean` no longer needs its own cardinal-arithmetic proofs for them.
The broader motivation comes from projects in infinitary model theory that build on Mathlib, in which one typically needs to carry around a hypothesis about countability of the set of symbols.
Specifically, in [cameronfreer/infinitary-logic](https://github.com/cameronfreer/infinitary-logic) the two sorts are carried unbundled and independently throughout; there are roughly 180 occurrences of the relation-symbol hypothesis and 24 of the function-symbol one. Here are a few examples:
* [`Methods/Henkin/ModelExistence.lean#L60`](https://github.com/cameronfreer/infinitary-logic/blob/1a478e80794080a536931c029281bb65266b3171/InfinitaryLogic/Methods/Henkin/ModelExistence.lean#L60): model existence, carrying both hypotheses side by side;
* [`Admissible/Compactness.lean#L90`](https://github.com/cameronfreer/infinitary-logic/blob/1a478e80794080a536931c029281bb65266b3171/InfinitaryLogic/Admissible/Compactness.lean#L90): Barwise completeness, likewise;
* [`Descriptive/Polish.lean#L46`](https://github.com/cameronfreer/infinitary-logic/blob/1a478e80794080a536931c029281bb65266b3171/InfinitaryLogic/Descriptive/Polish.lean#L46): a section variable assuming only the relation symbols are countable, which is where one notices the missing companion instance;
* [`Methods/LopezEscobar/CodeClass.lean#L29`](https://github.com/cameronfreer/infinitary-logic/blob/1a478e80794080a536931c029281bb65266b3171/InfinitaryLogic/Methods/LopezEscobar/CodeClass.lean#L29): a custom `Countable (Σ n, L.Functions n)` instance for relational languages, which is an example of the bookkeeping that arises from the two sorts not being related by a single lemma.
(Note that the `countable_functions` and `countable_relations` instances only project *out of* `Countable L.Symbols` into a summand; the converse direction is stated as a theorem rather than an instance, so there is no risk of an instance cycle.)
🤖 These proofs were written with the assistance of Claude Opus 5 high and reviewed by GPT Sol 5.6 xhigh.
|
t-logic
new-contributor
LLM-generated
|
33/12 |
Mathlib/ModelTheory/Basic.lean,Mathlib/ModelTheory/Encoding.lean,Mathlib/ModelTheory/LanguageMap.lean |
3 |
5 |
['NoneMore', 'cameronfreer', 'github-actions'] |
nobody |
8-16783 8 days ago |
9-43555 9 days ago |
9-46751 9 days |
| 42203 |
cameronfreer author:cameronfreer |
feat(Algebra/MvPolynomial): compact only the right summand of a sum of variables |
Currently `exists_fin_rename` reindexes the entire variable type along an injection `Fin n → σ`. At `σ ⊕ τ` this renumbers the left-hand variables together with the right-hand ones, so it cannot be used when the left summand carries meaning that has to be preserved.
This PR adds two variants that leave the left summand alone, mirroring the existing `exists_finset_rename` / `exists_fin_rename` pair:
```lean
theorem exists_finset_right_rename (p : MvPolynomial (σ ⊕ τ) R) :
∃ (t : Finset τ) (q : MvPolynomial (σ ⊕ { x // x ∈ t }) R),
p = rename (Sum.map id (↑)) q
theorem exists_fin_right_rename (p : MvPolynomial (σ ⊕ τ) R) :
∃ (n : ℕ) (f : Fin n → τ) (_hf : Injective f) (q : MvPolynomial (σ ⊕ Fin n) R),
p = rename (Sum.map id f) q
```
The first of these factors `exists_finset_rename` through `Finset.toRight`: rename along the map that fixes the left-hand variables and sends each right-hand variable of the finset into `s.toRight`.
The second one then enumerates that right-hand finset with `Fintype.equivFin`, the same way that `exists_fin_rename` does.
Motivation: a Diophantine relation is presented as a polynomial in input variables along with existentially quantified witness variables, and the normal form wants inputs indexed by `Fin n` and witnesses compacted to `Fin m`. Only the witnesses may be reindexed; renumbering the inputs changes the relation being represented. This comes up in work I've been exploring towards Hilbert's tenth problem (the TODO in `Mathlib.NumberTheory.Dioph`), though the statement is independent of that.
🤖 These proofs were written with the assistance of Claude Opus 5 high and reviewed by GPT Sol 5.6 xhigh.
|
t-algebra
new-contributor
LLM-generated
label:t-algebra$ |
41/0 |
Mathlib/Algebra/MvPolynomial/Rename.lean |
1 |
3 |
['cameronfreer', 'github-actions'] |
nobody |
8-16783 8 days ago |
9-80586 9 days ago |
9-81398 9 days |
| 42178 |
cameronfreer author:cameronfreer |
feat(Computability/Primrec/List): add theorems showing that List.all, List.any and List.sum are primitive recursive |
Add the parameterized `list_all`, `list_any` and natural-number `list_sum`, in the style of the existing `list_map`, `list_foldr` and `list_findIdx`.
Mathlib already has a parameterized core, but no direct lemmas for these standard list operations, so downstream developments tend to reconstruct them from `list_foldr` at each use site. In the course of writing [cameronfreer/computable-analysis](https://github.com/cameronfreer/computable-analysis) I ended up needing this in three places, all of which can now make use of the results here instead (see [a6898b5](https://github.com/cameronfreer/computable-analysis/commit/a6898b5), in particular `Weihrauch/Principles/Limit.lean:117`, `TypeTwo/PrefixTable.lean:334,351,369`, and `Measure/DisintegrateLower.lean:877,902`).
:robot: These proofs were written with the assistance of Claude Opus 5 high and reviewed by GPT Sol 5.6 xhigh. |
t-computability
new-contributor
LLM-generated
|
21/1 |
Mathlib/Computability/Primrec/List.lean |
1 |
4 |
['cameronfreer', 'github-actions'] |
nobody |
8-16776 8 days ago |
10-36701 10 days ago |
10-36689 10 days |
| 42265 |
cameronfreer author:cameronfreer |
chore(RingTheory/PowerSeries): simplify coeff_inv_aux |
This replaces the hand-written `Finset.sum_nbij'` in `coeff_inv_aux` with `simp_rw` + `simp`, via `Finsupp.antidiagonal_single`, the same rewrite that `PowerSeries.coeff_mul` already uses.
:robot: Golfing target found by GPT Pro 5.6 Sol, initial version of code written by Opus 5 high, refined by GPT 5.6 Sol xhigh, then again by Opus 5 high following @felixpernegger's review suggestion. |
t-ring-theory
new-contributor
LLM-generated
|
2/19 |
Mathlib/RingTheory/PowerSeries/Inverse.lean |
1 |
7 |
['cameronfreer', 'felixpernegger', 'github-actions', 'mathlib-bors'] |
nobody |
8-15242 8 days ago |
8-15322 8 days ago |
8-77509 8 days |
| 42133 |
joelkronqvist author:joelkronqvist |
feat(Order/Interval/Set/LinearOrder): add thms for unions of adjacent intervals |
This PR adds four new lemmas stating that for two nonempty intervals with a common endpoint, taking their union is equal to removing that common endpoint from a larger interval.
I use the fact `Ioo_union_Ioo_eq_Ioo_sdiff_singleton` in [ExtremeValueProject](https://github.com/joelkronqvist/ExtremeValueProject/commits/kandi-linear_of_additive_of_le_on_measure_pos).
I could also add versions of these lemmas for half-open intervals to this PR. Should I do it? I haven't added them yet because I suspect their proofs are quite repetitive and I'd like to get feedback on the first four additions to reduce the need of repetitive rewrites. Where would they belong? Probably not in a section that is concerned with two finite intervals with a common point. This addition would add 5 more proofs for `Iio ∪ Ioi`, `Ioo ∪ Ioi`, `Iio ∪ Ioo`, `Ico ∪ Ioi` and `Iio ∪ Ioc`.
Co-authored-by: Kalle Kytölä <kalle.kytola@aalto.fi>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
new-contributor
|
32/0 |
Mathlib/Order/Interval/Set/LinearOrder.lean |
1 |
3 |
['felixpernegger', 'github-actions', 'joelkronqvist', 'wwylele'] |
nobody |
8-9713 8 days ago |
11-27048 11 days ago |
11-27036 11 days |
| 38596 |
JJYYY-JJY author:JJYYY-JJY |
feat(LinearAlgebra/Matrix): add elementary row operations |
Add row-scaling matrices and row equivalence via the action of the general linear group.
Co-authored-by: Joseph Qian <jqian507@gmail.com>
Co-authored-by: Veer Shukla <shukvee@uw.edu>
Co-authored-by: Dhruv Bhatia <dhruvbhatia00@gmail.com>
Co-authored-by: Zheng Wu <1036819072@qq.com>
---
The echelon-form definitions from the previous version were removed in favor of #42236. |
t-algebra
new-contributor
label:t-algebra$ |
195/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Matrix/Elementary.lean |
2 |
37 |
['JJYYY-JJY', 'SnirBroshi', 'bryangingechen', 'copilot-pull-request-reviewer', 'dagurtomas', 'github-actions', 'mathlib-merge-conflicts', 'mathlib-splicebot', 'ocfnash', 'themathqueen', 'wwylele'] |
mattrobball and ocfnash assignee:ocfnash assignee:mattrobball |
8-6899 8 days ago |
8-7644 8 days ago |
75-15087 75 days |
| 42235 |
marcelolynch author:marcelolynch |
chore: remove unused open declarations |
This PR removes namespaces from `open` commands when no declaration of the scope uses them.
Found the candidates with metaprogramming, then double checked file by file. The linter used for this itself is not proposed for adoption (the approach is prone to false positives) but these verified removals still stand.
Unused `open` declarations carry two costs: they invite ambiguous-reference errors for later edits in the scope, and they misdescribe the dependencies of the file to readers. There is no performance effect.
Zulip discussion: https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Removing.20unnecessary.20.60open.60.20declarations/with/613515627 |
|
616/1099 |
Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/BigOperators/Group/Finset/Pi.lean,Mathlib/Algebra/BigOperators/Group/Finset/Preimage.lean,Mathlib/Algebra/BigOperators/Group/Finset/Sigma.lean,Mathlib/Algebra/BigOperators/Ring/List.lean,Mathlib/Algebra/Category/AlgCat/Basic.lean,Mathlib/Algebra/Category/BialgCat/Monoidal.lean,Mathlib/Algebra/Category/BoolRing.lean,Mathlib/Algebra/Category/CommAlgCat/FiniteType.lean,Mathlib/Algebra/Category/FGModuleCat/Abelian.lean,Mathlib/Algebra/Category/Grp/Abelian.lean,Mathlib/Algebra/Category/HopfAlgCat/Monoidal.lean,Mathlib/Algebra/Category/ModuleCat/AB.lean,Mathlib/Algebra/Category/ModuleCat/Ext/Basic.lean,Mathlib/Algebra/Category/ModuleCat/InjectiveDimension.lean,Mathlib/Algebra/Category/ModuleCat/ProjectiveDimension.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Abelian.lean,Mathlib/Algebra/CharP/Reduced.lean,Mathlib/Algebra/CharZero/Infinite.lean,Mathlib/Algebra/Colimit/Module.lean,Mathlib/Algebra/DirectSum/Finsupp.lean,Mathlib/Algebra/Field/Basic.lean,Mathlib/Algebra/Field/Defs.lean,Mathlib/Algebra/Field/GeomSum.lean,Mathlib/Algebra/Group/Pointwise/Finset/Scalar.lean,Mathlib/Algebra/Group/Pointwise/Set/Lattice.lean,Mathlib/Algebra/Group/Subgroup/Defs.lean,Mathlib/Algebra/GroupWithZero/Action/Faithful.lean,Mathlib/Algebra/GroupWithZero/Action/Pointwise/Set.lean,Mathlib/Algebra/GroupWithZero/Pointwise/Set/Basic.lean,Mathlib/Algebra/Homology/DerivedCategory/Linear.lean,Mathlib/Algebra/Homology/ImageToKernel.lean,Mathlib/Algebra/Homology/LeftResolution/Transport.lean,Mathlib/Algebra/Homology/ShortComplex/ModuleCat.lean,Mathlib/Algebra/Lie/EngelSubalgebra.lean,Mathlib/Algebra/Lie/Weights/Linear.lean,Mathlib/Algebra/Module/CharacterModule.lean,Mathlib/Algebra/Module/Defs.lean,Mathlib/Algebra/Module/End.lean,Mathlib/Algebra/Module/Equiv/Basic.lean,Mathlib/Algebra/Module/GradedModule.lean,Mathlib/Algebra/Module/LocalizedModule/Int.lean,Mathlib/Algebra/Module/LocalizedModule/Submodule.lean,Mathlib/Algebra/Module/NatInt.lean,Mathlib/Algebra/Module/PID.lean,Mathlib/Algebra/Module/RingHom.lean,Mathlib/Algebra/Module/Submodule/Map.lean,Mathlib/Algebra/MonoidAlgebra/Support.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/MvPolynomial/PDeriv.lean,Mathlib/Algebra/Order/AddTorsor.lean,Mathlib/Algebra/Order/Algebra.lean,Mathlib/Algebra/Order/BigOperators/Group/LocallyFinite.lean,Mathlib/Algebra/Order/Field/GeomSum.lean,Mathlib/Algebra/Order/Field/Pointwise.lean,Mathlib/Algebra/Order/Floor/Defs.lean,Mathlib/Algebra/Order/Floor/Semifield.lean,Mathlib/Algebra/Order/Group/Abs.lean,Mathlib/Algebra/Order/Group/CompleteLattice.lean,Mathlib/Algebra/Order/Group/Defs.lean,Mathlib/Algebra/Order/Group/Lattice.lean,Mathlib/Algebra/Order/Group/OrderIso.lean,Mathlib/Algebra/Order/Group/Pointwise/CompleteLattice.lean,Mathlib/Algebra/Order/Group/Unbundled/Abs.lean,Mathlib/Algebra/Order/Group/Unbundled/Basic.lean,Mathlib/Algebra/Order/Group/Unbundled/Int.lean,Mathlib/Algebra/Order/GroupWithZero/Synonym.lean,Mathlib/Algebra/Order/Hom/Basic.lean,Mathlib/Algebra/Order/Interval/Basic.lean,Mathlib/Algebra/Order/Interval/Finset/Basic.lean,Mathlib/Algebra/Order/Interval/Finset/SuccPred.lean,Mathlib/Algebra/Order/Interval/Set/SuccPred.lean,Mathlib/Algebra/Order/Monoid/NatCast.lean,Mathlib/Algebra/Order/Monoid/OrderDual.lean,Mathlib/Algebra/Order/Monoid/Unbundled/MinMax.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Pow.lean,Mathlib/Algebra/Order/Monoid/WithTop.lean,Mathlib/Algebra/Order/Nonneg/Basic.lean,Mathlib/Algebra/Order/Nonneg/Field.lean,Mathlib/Algebra/Order/Nonneg/Ring.lean,Mathlib/Algebra/Order/Ring/Basic.lean,Mathlib/Algebra/Order/Ring/Cast.lean,Mathlib/Algebra/Order/Ring/Defs.lean,Mathlib/Algebra/Order/Ring/GeomSum.lean,Mathlib/Algebra/Order/SuccPred/PartialSups.lean,Mathlib/Algebra/Order/ZeroLEOne.lean,Mathlib/Algebra/Pointwise/Stabilizer.lean,Mathlib/Algebra/Polynomial/Cardinal.lean,Mathlib/Algebra/Polynomial/Degree/Domain.lean,Mathlib/Algebra/Polynomial/Degree/Lemmas.lean,Mathlib/Algebra/Polynomial/Degree/Monomial.lean,Mathlib/Algebra/Polynomial/Degree/SmallDegree.lean,Mathlib/Algebra/Polynomial/Degree/TrailingDegree.lean,Mathlib/Algebra/Polynomial/Degree/Units.lean,Mathlib/Algebra/Polynomial/DenomsClearable.lean,Mathlib/Algebra/Polynomial/Eval/Algebra.lean,Mathlib/Algebra/Polynomial/Eval/Degree.lean,Mathlib/Algebra/Polynomial/Eval/Irreducible.lean,Mathlib/Algebra/Polynomial/Eval/SMul.lean,Mathlib/Algebra/Polynomial/Inductions.lean |
797 |
3 |
['b-mehta', 'github-actions', 'marcelolynch'] |
nobody |
8-350 8 days ago |
8-82638 8 days ago |
8-82626 8 days |
| 42214 |
marcelolynch author:marcelolynch |
chore: remove unused section variables |
This PR removes about 1955 `variable` binders that no declaration in their scope uses, together with the anonymous instance binders that mention them.
A prototype stateful linter found the binders in a sweep over all of mathlib; #42216 contains the linter for reference. An automated edit removed each dead binder and its dependent instance binders, and every edited file was verified to compile after the edit. Files whose findings could not be verified, or whose sources differ between master and the validation branch, were dropped from the PR.
Section variables enter a declaration only when the declaration uses them. The removals therefore change no signatures and have no effect on other files: the change is invisible outside the edited files.However, dead instance binders sit in the local context of every declaration of their scope and participate in every type class search there.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
|
|
1143/1387 |
Mathlib/Algebra/Algebra/Defs.lean,Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/Algebra/Algebra/Hom.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Operations.lean,Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Algebra/Subalgebra/Lattice.lean,Mathlib/Algebra/Algebra/Subalgebra/Tower.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/BigOperators/Group/Finset/Defs.lean,Mathlib/Algebra/BigOperators/Group/Finset/Lemmas.lean,Mathlib/Algebra/BigOperators/Group/Finset/Piecewise.lean,Mathlib/Algebra/BigOperators/Group/Finset/Powerset.lean,Mathlib/Algebra/BigOperators/Group/Finset/Sigma.lean,Mathlib/Algebra/BigOperators/Group/List/Lemmas.lean,Mathlib/Algebra/BigOperators/Group/Multiset/Defs.lean,Mathlib/Algebra/BigOperators/Intervals.lean,Mathlib/Algebra/Category/CommAlgCat/Monoidal.lean,Mathlib/Algebra/Category/Grp/Abelian.lean,Mathlib/Algebra/CharP/Defs.lean,Mathlib/Algebra/CharP/Frobenius.lean,Mathlib/Algebra/CharP/Lemmas.lean,Mathlib/Algebra/CubicDiscriminant.lean,Mathlib/Algebra/DirectSum/Module.lean,Mathlib/Algebra/Divisibility/Basic.lean,Mathlib/Algebra/Field/GeomSum.lean,Mathlib/Algebra/Field/Periodic.lean,Mathlib/Algebra/Field/Subfield/Defs.lean,Mathlib/Algebra/Group/Action/End.lean,Mathlib/Algebra/Group/Action/Equidecomp.lean,Mathlib/Algebra/Group/Action/Pointwise/Set/Basic.lean,Mathlib/Algebra/Group/Action/Prod.lean,Mathlib/Algebra/Group/Action/TypeTags.lean,Mathlib/Algebra/Group/Equiv/Basic.lean,Mathlib/Algebra/Group/Equiv/Finite.lean,Mathlib/Algebra/Group/Finsupp.lean,Mathlib/Algebra/Group/Irreducible/Defs.lean,Mathlib/Algebra/Group/Nat/Hom.lean,Mathlib/Algebra/Group/Nat/Range.lean,Mathlib/Algebra/Group/Pi/Basic.lean,Mathlib/Algebra/Group/Pointwise/Finset/Basic.lean,Mathlib/Algebra/Group/Pointwise/Finset/Scalar.lean,Mathlib/Algebra/Group/Pointwise/Set/Basic.lean,Mathlib/Algebra/Group/Pointwise/Set/Finite.lean,Mathlib/Algebra/Group/Pointwise/Set/Lattice.lean,Mathlib/Algebra/Group/Pointwise/Set/Scalar.lean,Mathlib/Algebra/Group/Pointwise/Set/Small.lean,Mathlib/Algebra/Group/Subgroup/Basic.lean,Mathlib/Algebra/Group/Subgroup/Finite.lean,Mathlib/Algebra/Group/Subgroup/Ker.lean,Mathlib/Algebra/Group/Subgroup/Map.lean,Mathlib/Algebra/Group/Subgroup/MulOpposite.lean,Mathlib/Algebra/Group/Subgroup/ZPowers/Basic.lean,Mathlib/Algebra/Group/Submonoid/BigOperators.lean,Mathlib/Algebra/Group/Submonoid/Pointwise.lean,Mathlib/Algebra/Group/Units/Defs.lean,Mathlib/Algebra/Group/Units/Opposite.lean,Mathlib/Algebra/GroupWithZero/Action/Basic.lean,Mathlib/Algebra/GroupWithZero/Basic.lean,Mathlib/Algebra/Homology/Bifunctor.lean,Mathlib/Algebra/Homology/Embedding/ExtendHomology.lean,Mathlib/Algebra/Homology/HomotopyCategory/HomComplexCohomology.lean,Mathlib/Algebra/Homology/HomotopyCategory/Pretriangulated.lean,Mathlib/Algebra/Homology/LocalCohomology.lean,Mathlib/Algebra/Homology/Localization.lean,Mathlib/Algebra/Homology/ShortComplex/Abelian.lean,Mathlib/Algebra/Homology/ShortComplex/HomologicalComplex.lean,Mathlib/Algebra/Homology/ShortComplex/Homology.lean,Mathlib/Algebra/Homology/ShortComplex/Linear.lean,Mathlib/Algebra/Homology/ShortComplex/PreservesHomology.lean,Mathlib/Algebra/Homology/SpectralObject/EpiMono.lean,Mathlib/Algebra/Homology/SpectralObject/Homology.lean,Mathlib/Algebra/Homology/SpectralObject/Page.lean,Mathlib/Algebra/Lie/Abelian.lean,Mathlib/Algebra/Lie/Ideal.lean,Mathlib/Algebra/Lie/InvariantForm.lean,Mathlib/Algebra/Lie/Rank.lean,Mathlib/Algebra/Lie/Submodule.lean,Mathlib/Algebra/Module/Defs.lean,Mathlib/Algebra/Module/End.lean,Mathlib/Algebra/Module/GradedModule.lean,Mathlib/Algebra/Module/LinearMap/FiniteRange.lean,Mathlib/Algebra/Module/Opposite.lean,Mathlib/Algebra/Module/RingHom.lean,Mathlib/Algebra/Module/Submodule/Basic.lean,Mathlib/Algebra/Module/Submodule/Defs.lean,Mathlib/Algebra/Module/Submodule/Equiv.lean,Mathlib/Algebra/Module/Submodule/Ker.lean,Mathlib/Algebra/Module/Submodule/LinearMap.lean,Mathlib/Algebra/Module/Submodule/Map.lean,Mathlib/Algebra/Module/Submodule/Pointwise.lean,Mathlib/Algebra/Module/Torsion/Free.lean,Mathlib/Algebra/MonoidAlgebra/Lift.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/MvPolynomial/Eval.lean,Mathlib/Algebra/MvPolynomial/NoZeroDivisors.lean,Mathlib/Algebra/MvPolynomial/PDeriv.lean |
811 |
14 |
['github-actions', 'leanprover-radar', 'marcelolynch', 'thorimur'] |
nobody |
7-81216 7 days ago |
8-61086 8 days ago |
8-61074 8 days |
| 31135 |
kckennylau author:kckennylau |
feat(RingTheory): is localization iff is localization on saturation |
In this PR we show that `A` is a localization of `R` on the submonoid `S` iff it is so on the saturation of `S`.
Crucially, the saturation of `S` is precisely the elements that become a unit in `A`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #31132
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
53/0 |
Mathlib.lean,Mathlib/RingTheory/Localization/Saturation.lean |
2 |
20 |
['alreadydone', 'chrisflav', 'github-actions', 'kckennylau', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'riccardobrasca'] |
alreadydone assignee:alreadydone |
7-67877 7 days ago |
30-33150 30 days ago |
77-33284 77 days |
| 40197 |
plp127 author:plp127 |
feat: valuation of an algebraic element |
We prove that if `x` is algebraic over `K` then there exists some `n ≠ 0` such that the valuation of `x` raised to the `n`-th power is equal to the valuation of some element of `K`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
67/0 |
Mathlib.lean,Mathlib/RingTheory/Valuation/Algebraic.lean |
2 |
1 |
['github-actions'] |
alreadydone assignee:alreadydone |
7-67876 7 days ago |
65-731 65 days ago |
65-719 65 days |
| 41187 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): constructor for `IsCardinalPresentable` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
28/5 |
Mathlib/CategoryTheory/Presentable/Basic.lean |
1 |
8 |
['github-actions', 'joelriou', 'smorel394'] |
robin-carlier assignee:robin-carlier |
7-67873 7 days ago |
37-51963 37 days ago |
38-35902 38 days |
| 41312 |
EtienneC30 author:EtienneC30 |
feat: the indicator of a set is a Bernoulli random variable |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
large-import
|
40/0 |
Mathlib/Probability/Distributions/Bernoulli.lean |
1 |
1 |
['github-actions'] |
kex-y assignee:kex-y |
7-67872 7 days ago |
35-41436 35 days ago |
35-41930 35 days |
| 41891 |
sgouezel author:sgouezel |
feat: Fubini theorem for vector measures |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
259/0 |
Mathlib/MeasureTheory/VectorMeasure/Prod.lean |
1 |
5 |
['SnirBroshi', 'github-actions', 'sgouezel'] |
kex-y assignee:kex-y |
7-67871 7 days ago |
20-19875 20 days ago |
20-19921 20 days |
| 40597 |
xroblot author:xroblot |
feat(GroupTheory/SpecificGroups/Cyclic): add IsCyclic.subgroup_le/eq_subgroup_iff |
Add the following results about subgroup comparison in finite cyclic groups.
In `Mathlib.Algebra.Group.Subgroup.ZPowers.Lemmas`:
- `Int.zmultiples_le_zmultiples_iff`: `zmultiples a ≤ zmultiples b ↔ b ∣ a`
In `Mathlib.GroupTheory.SpecificGroups.Cyclic`:
- `AddSubgroup.zmultiples_le_zmultiples_iff`: `zmultiples (i • g) ≤ zmultiples (j • g) ↔ j.gcd (addOrderOf g) ∣ i.gcd (addOrderOf g)`
- `Subgroup.zpowers_le_zpowers_iff`: multiplicative version
- `Subgroup.zpowers_eq_zpowers_iff'`: `zpowers (g ^ i) = zpowers (g ^ j) ↔ i.gcd (orderOf g) = j.gcd (orderOf g)`
- `IsCyclic.subgroup_le_subgroup_iff`: in a finite cyclic group, `H ≤ K ↔ Nat.card H ∣ Nat.card K`
- `IsCyclic.subgroup_eq_subgroup_iff`: in a finite cyclic group, `H = K ↔ Nat.card H = Nat.card K`
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-group-theory |
113/0 |
Mathlib/Algebra/Group/Subgroup/Ker.lean,Mathlib/Algebra/Group/Subgroup/ZPowers/Lemmas.lean,Mathlib/Data/Nat/GCD/Basic.lean,Mathlib/GroupTheory/OrderOfElement.lean,Mathlib/GroupTheory/SpecificGroups/Cyclic.lean |
5 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
7-66973 7 days ago |
29-11280 29 days ago |
47-84874 47 days |
| 41260 |
SnirBroshi author:SnirBroshi |
feat(GroupTheory/Exponent): the order of a group divides a power of its exponent |
For finite groups:
- `(Monoid.exponent G).primeFactors = (Nat.card G).primeFactors`
- `Nat.card G ∣ Monoid.exponent G ^ Nat.card G`
---
This requires importing Cauchy's theorem (`GroupTheory.Perm.Cycle.Type`) in `Exponent.lean` which I'm not sure about, but the alternatives are either moving the theorems to `PGroup.lean`, or creating a new file with a strange name like `ExponentLemmas.lean`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
large-import
|
27/5 |
Mathlib/GroupTheory/Exponent.lean,Mathlib/GroupTheory/Perm/Cycle/Type.lean |
2 |
13 |
['SnirBroshi', 'github-actions', 'ocfnash', 'tb65536'] |
nobody |
7-66970 7 days ago |
36-3110 36 days ago |
36-36745 36 days |
| 42167 |
felixpernegger author:felixpernegger |
feat(Topology): small inductive dimension does not increase under inducing maps |
The small inductive dimension of a topological space does not increase under inducing maps; in particular, the dimension of a subspace is less or equal to that of the original space and the dimension is preserved by homeomorphisms.
Story of this PR:
I originally proved this (entirely by hand) for homeomorphisms, but @plp127 pointed out this can be improved. I then asked Codex (GPT 5.6 Sol high) to prove the generalisation. I reviewed the AI code carefully and golfed it slightly.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
large-import
LLM-generated
|
51/4 |
Mathlib/Topology/SmallInductiveDimension.lean |
1 |
24 |
['felixpernegger', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'plp127', 'vihdzp'] |
nobody |
7-64523 7 days ago |
7-66785 7 days ago |
10-52592 10 days |
| 42283 |
YaelDillies author:YaelDillies |
feat(RingTheory): diagonalisable Hopf algebras |
Define diagonalisable Hopf algebras as those that are isomorphic to some group algebra. We will prove in a later PR that they are closed under tensor product.
From Toric
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Riccardo, feel free to push reasonable changes directly. I am AFK for two weeks.
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
toric
|
168/1 |
Mathlib.lean,Mathlib/LinearAlgebra/Finsupp/LinearCombination.lean,Mathlib/LinearAlgebra/LinearIndependent/Defs.lean,Mathlib/RingTheory/HopfAlgebra/Basic.lean,Mathlib/RingTheory/HopfAlgebra/Diagonalisable.lean |
5 |
1 |
['github-actions'] |
nobody |
7-45193 7 days ago |
7-45193 7 days ago |
7-45233 7 days |
| 42000 |
kebekus author:kebekus |
feat: trivial estimates for the positive part of the logarithm |
Complete API for posLog by adding several trivial but useful estimates.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
large-import
|
60/15 |
Mathlib/Analysis/SpecialFunctions/Log/PosLog.lean |
1 |
22 |
['felixpernegger', 'github-actions', 'kebekus'] |
nobody |
7-42099 7 days ago |
7-42744 7 days ago |
16-39014 16 days |
| 41696 |
vaca22 author:vaca22 |
feat(RingTheory): generalize relNorm_eq_pow_of_isMaximal to separable fraction field extensions |
This PR relaxes the hypothesis of Ideal.relNorm_eq_pow_of_isMaximal and its supporting Ring.NormalClosure instances.
Originally the theorem required the fraction ring of base Dedekind domain R to be a perfect field. Now we only require the fraction field extension to be separable.
The perfect field condition excludes function fields with imperfect constant fields, which is an important case we want to support. The core mathematical insight is that the normal closure of a separable field extension stays separable, so we can construct the Galois structure without a perfect base.
This change is fully backwards compatible: any existing code relying on the old perfect field assumption still compiles, since perfect fields automatically give separable extensions. Only two files are modified: NormalClosure.lean and RelNorm.lean, with small diff and no extra imports.
AI disclosure: I used AI tools to assist with initial code drafting and full CI validation. All mathematical reasoning and proof logic I worked through independently, and I can explain every adjustment in review. My original PR text relied too heavily on AI output, I’ve fully rewritten this description manually. |
new-contributor
t-ring-theory
LLM-generated
|
23/3 |
Mathlib/FieldTheory/Galois/Basic.lean,Mathlib/RingTheory/Ideal/Norm/RelNorm.lean,Mathlib/RingTheory/NormalClosure.lean |
3 |
15 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'vaca22', 'xroblot'] |
nobody |
7-41722 7 days ago |
16-4753 16 days ago |
21-13651 21 days |
| 41898 |
marcinbugaj author:marcinbugaj |
feat(Analysis/Convex): majorization preorder and T-transform decomposition |
Define `Majorizes` (notation `≺`) on `Fin n → ℝ`, show it is a preorder, define single T-transforms (`TTransform`/`RelatedByTTransform`) and `discrepancy`, and prove `majorizes_iff_reflTransGen_relatedByTTransform`: `a ≺ b` iff the sorted `a` is reachable from the sorted `b` by a finite chain of T-transforms (both directions).
|
t-analysis
new-contributor
|
782/0 |
Mathlib.lean,Mathlib/Analysis/Convex/Majorization.lean,docs/references.bib |
3 |
9 |
['YaelDillies', 'github-actions', 'marcinbugaj'] |
nobody |
7-40043 7 days ago |
14-28765 14 days ago |
19-26240 19 days |
| 41757 |
wwylele author:wwylele |
doc: add theorem 8 (straightedge-and-compass construction) to 100.yaml |
Adding my repo as an external proof to the theorems.
---
A hard part of these theorems is verifying the definition and the statement. I have extracted the relevant definition in the [Challenge.lean file](https://github.com/wwylele/Compass/blob/master/Challenge.lean) for review. This is also verifiable using comparator. I followed [wikipedia](https://en.wikipedia.org/wiki/Straightedge_and_compass_construction#The_basic_constructions) for the definition of constructibility
Zulip thread: [#general > The impossibility of trisecting the angle](https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/The.20impossibility.20of.20trisecting.20the.20angle/with/610005158) (there is discussion about whether this definition allows "picking an arbitrary point")
I plan to upstream some or all of the project, but I anticipate it to be a long process, and it is not clear to me whether the entire project is within the scope of Mathlib, which is why I am only adding a link to the repo for now
AI usage disclosure: [this 63 lines](https://github.com/wwylele/Compass/blob/1352a83753052bc9a069b52aced81785dccb0aba/Compass/ConstructibleNumber.lean#L45-L111) were generated by Aristotle. The rest were written by me.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
documentation
maintainer-merge
|
3/0 |
docs/100.yaml |
1 |
4 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
7-39583 7 days ago |
23-81375 23 days ago |
23-81363 23 days |
| 41938 |
rosborn author:rosborn |
chore(Linter/DirectoryDependency): move forbidden directories into a JSON file |
Co-authored-by: Michael Rothgang <rothgang@math.uni-bonn.de>
---
This PR adopts the work from #26088 and #26406.
The JSON file was generated programmatically from the previous hard-coded array and verified to produce an identical relation, with one deliberate exception: the entry ``(`MathlibTest.Header, `Mathlib.Deprecated)`` was dropped.
If this looks good, I can continue work on `allowedImportDirs` and `overrideAllowedImportDirs`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
|
t-linter
maintainer-merge
|
407/313 |
Mathlib/Tactic/Linter/DirectoryDependency.lean,scripts/README.md,scripts/forbiddenDirs.json |
3 |
14 |
['github-actions', 'grunweg', 'joneugster', 'rosborn'] |
grunweg and joneugster assignee:joneugster assignee:grunweg |
7-38236 7 days ago |
9-64029 9 days ago |
13-85638 13 days |
| 41591 |
xroblot author:xroblot |
refactor(NumberTheory/RamificationInertia): ring-level decomposition and inertia predicates |
Refactor of the decomposition/inertia infrastructure in Hilbert Theory to the level of rings with two new predicates `Ideal.IsDecompositionRing G P C` and `Ideal.IsInertiaRing G P C`: for a group `G` acting on a commutative ring `B` with prime `P`, they state that `B` is Galois over the ring `C` with Galois group the decomposition group, resp. the inertia group of P.
The old field-level classes and their whole API are deprecated in favor of the ring versions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41614
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
396/87 |
Mathlib/Algebra/Group/Subgroup/Basic.lean,Mathlib/NumberTheory/RamificationInertia/HilbertTheory.lean,Mathlib/RingTheory/Ideal/Maps.lean,Mathlib/RingTheory/Ideal/Pointwise.lean,Mathlib/RingTheory/RamificationInertia/Inertia.lean,Mathlib/RingTheory/RamificationInertia/Ramification.lean |
6 |
12 |
['github-actions', 'mathlib-dependent-issues', 'tb65536', 'xroblot'] |
loefflerd assignee:loefflerd |
7-36124 7 days ago |
8-67044 8 days ago |
9-23274 9 days |
| 41982 |
scholzhannah author:scholzhannah |
feat: generalize `OpenPartialHomeomorph/IsImage` to `PartialHomeomorph` |
This is a continuation of #41045.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
355/11 |
Mathlib.lean,Mathlib/Topology/OpenPartialHomeomorph/IsImage.lean,Mathlib/Topology/PartialHomeomorph/IsImage.lean |
3 |
6 |
['fpvandoorn', 'github-actions', 'scholzhannah'] |
grunweg assignee:grunweg |
7-35475 7 days ago |
7-35492 7 days ago |
7-40250 7 days |
| 39696 |
jsm28 author:jsm28 |
refactor(LinearAlgebra/Orientation,LinearAlgebra/AffineSpace/FiniteDimensional): instances for arbitrary orientations |
Based on suggestions by @kim-em on Zulip https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/PRs.20towards.20IMO.20geometry.202024.20P4/near/596946072 add convenience scoped instances for choosing an arbitrary orientation of a module, and for the `finrank` of the span of the vertices of a simplex.
Note: I don't understand why the latter scoped instance is only found automatically in one of the two places using it; in `Sphere/Power.lean` it's necessary to use `Affine.Simplex.fact_finrank_direction_affineSpan_eq` rather than relying on typeclass inference, but in `Angle/Sphere.lean` typeclass inference suffices.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-euclidean-geometry
maintainer-merge
label:t-algebra$ |
26/23 |
Archive/Imo/Imo2019Q2.lean,Mathlib/Geometry/Euclidean/Angle/Sphere.lean,Mathlib/Geometry/Euclidean/Sphere/Power.lean,Mathlib/LinearAlgebra/AffineSpace/FiniteDimensional.lean,Mathlib/LinearAlgebra/Orientation.lean |
5 |
9 |
['YaelDillies', 'github-actions', 'jsm28', 'mathlib-merge-conflicts'] |
eric-wieser assignee:eric-wieser |
7-35400 7 days ago |
7-36069 7 days ago |
77-14333 77 days |
| 38489 |
Jun2M author:Jun2M |
feat(Topology/Algebra/InfiniteSum): Generalize ENNReal lemmas |
This PR generalizes many theorems in Topology/Algebra/InfiniteSum/ENNReal.lean from `ENNREal` to any type that satisfies a list of order-related instances, mostly
`[CommMonoid α] [CompleteLattice α] [CanonicallyOrderedMul α] [TopologicalSpace α] [SupConvergenceClass α]`
Deprecation of the original `ENNReal` lemmas are done in the next PR: #38193.
Related Zulip thread: [#Is there code for X? > Summing `ENat`s without topology](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Summing.20.60ENat.60s.20without.20topology/with/588756615)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
239/5 |
Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/OuterMeasure/OfFunction.lean,Mathlib/Probability/ProbabilityMassFunction/Monad.lean,Mathlib/Topology/Algebra/InfiniteSum/Basic.lean,Mathlib/Topology/Algebra/InfiniteSum/ENNReal.lean,Mathlib/Topology/Algebra/InfiniteSum/Order.lean |
6 |
11 |
['Jun2M', 'SnirBroshi', 'github-actions', 'j-loreaux', 'wwylele'] |
nobody |
7-30820 7 days ago |
23-15887 23 days ago |
104-67929 104 days |
| 42138 |
mitchell-horner author:mitchell-horner |
feat(Combinatorics/SimpleGraph): copies into `⊤` and containment in the complete graph, and replace `α`,`β`,`γ` with `V`,`W`,`X`, etc |
Add copy constructors mirroring the existing `Copy.bot` API. Also replaces `α`,`β`,`γ` with `V`,`W`,`X`, etc. throughout the file.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
100/80 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean |
1 |
7 |
['SnirBroshi', 'github-actions', 'mitchell-horner', 'vlad902'] |
nobody |
7-29711 7 days ago |
11-25667 11 days ago |
11-25655 11 days |
| 33664 |
ooovi author:ooovi |
feat(Geometry/Convex/Cone/Pointed): face lattice of pointed cones |
- Define PointedCone.IsFaceOf, for a pointed cone being a face of another pointed cone.
- Prove some basic properties, that faces are extreme sets of their cone, and how they behave under intersection, map and product operations.
- Define `Face` by bundling the `IsFaceOf` structure, and show the complete lattice structure on it.
- Prove that taking the product of two faces is an order isomorphism.
Co-authored-by: Martin Winter
---
- [x] depends on: #33780 for the definition of the lineal space
- [x] depends on: #39185 for `isFaceOf`
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry
maintainer-merge
|
202/0 |
Mathlib.lean,Mathlib/Geometry/Convex/Cone/Face/Lattice.lean |
2 |
205 |
['YaelDillies', 'eric-wieser', 'github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'ooovi', 'vihdzp'] |
nobody |
7-27416 7 days ago |
18-35738 18 days ago |
24-30695 24 days |
| 41814 |
JovanGerb author:JovanGerb |
fix(CategoryTheory/Limits/VanKampen): backport fix for lean#8883 |
This PR contains the fix that I had to make to get https://github.com/leanprover/lean4/pull/8883 working. When looking into this, I had concluded that the original proof should not have worked in the first place.
This was the only such failure that was present in mathlib.
I think having this fix will be helpful when work on the unification performance issue is resumed.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
maintainer-merge
|
1/1 |
Mathlib/CategoryTheory/Limits/VanKampen.lean |
1 |
3 |
['github-actions', 'grunweg'] |
nobody |
7-26548 7 days ago |
22-24891 22 days ago |
22-24879 22 days |
| 31892 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Sphere/PolePolar): poles and polars |
Define poles and polars for spheres in Euclidean affine spaces, and set up some basic API, including in particular La Hire's theorem (`p₁` lies on the polar of `p₂` if and only if `p₂` lies on the polar of `p₁`).
Poles and polars are actually meaningful for any quadric in a projective space over any field, but I think it's reasonable to set up this theory for spheres in the Euclidean context and potentially link it in future to more general projective geometry.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #31891
- [x] depends on: #32296
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
157/0 |
Mathlib.lean,Mathlib/Geometry/Euclidean/Sphere/PolePolar.lean |
2 |
19 |
['Parcly-Taxel', 'YaelDillies', 'github-actions', 'jsm28', 'kim-em', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
7-24755 7 days ago |
7-31684 7 days ago |
133-2918 133 days |
| 40910 |
riccardobrasca author:riccardobrasca |
feat: add comap_map_eq_of_unramified and related declarations |
From flt-regular.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
170/0 |
Mathlib/RingTheory/DedekindDomain/Different.lean |
1 |
1 |
['github-actions'] |
nobody |
7-22963 7 days ago |
7-23561 7 days ago |
45-80600 45 days |
| 42157 |
sdflkjssl author:sdflkjssl |
feat(LinearAlgebra/Matrix): add the generalized E-type Cartan matrix family |
This PR adds a generalized family `CartanMatrix.E n`, obtained by continuing the Dynkin-diagram pattern of the exceptional matrices E₆, E₇, and E₈.
For `n ≥ 3`, it proves the uniform determinant formula:
```lean
theorem E_det {n : ℕ} (hn : 3 ≤ n) : (E n).det = 9 - (n : ℤ)
```
## Public API
- `CartanMatrix.E (n : ℕ)` is the generalized E-type Cartan matrix.
- `CartanMatrix.E_det` gives its determinant for `n ≥ 3`.
- `CartanMatrix.E_six_eq`, `CartanMatrix.E_seven_eq`, and `CartanMatrix.E_eight_eq` identify `E 6`, `E 7`, and `E 8` with the usual explicit matrices.
The generalized family is the canonical definition. The former constants `CartanMatrix.E₆`, `CartanMatrix.E₇`, and `CartanMatrix.E₈` are retained as deprecated abbreviations for `E 6`, `E 7`, and `E 8` to preserve compatibility. The existing theorem names such as `E₆_diag`, `E₆_det`, and `isSimplyLaced_E₆` are retained, but their statements use `E 6`; similarly for E₇ and E₈.
The downstream definitions `LieAlgebra.e₆`, `LieAlgebra.e₇`, and `LieAlgebra.e₈` in `SerreConstruction.lean` now use `CartanMatrix.E 6`, `CartanMatrix.E 7`, and `CartanMatrix.E 8`.
The fixed-size determinant proofs introduced in #42119 continue to use `norm_det` after rewriting with the corresponding explicit-matrix equality lemmas.
## Proof outline
After reindexing by `Fin.revPerm`, passing from `E n` to `E (n + 1)` amounts to adjoining a leaf to the beginning of a path. Laplace expansion first along the new row and then along the resulting sparse column gives the recurrence
```text
dₙ₊₂ = 2dₙ₊₁ - dₙ.
```
The initial values are `d₃ = 6`, `d₄ = 5`, and `d₅ = 4`. A two-step induction gives `dₙ = 9 - n` for every `n ≥ 4`, while `n = 3` is handled by the initial computation.
The auxiliary definitions describing the reversed matrices and path extension are private.
## Review changes
The definition of `E` uses `Matrix.of`, consistently with the other infinite Cartan matrix families in this file. To accommodate `Matrix.of`, the broad `simp` calls in `reverseE_succ` are replaced by controlled `simp only` steps, since direct unfolding otherwise reaches the maximum recursion depth. This does not change the statement or the mathematical argument.
The separate definitions of `E₆`, `E₇`, and `E₈` are replaced by deprecated abbreviations for `E 6`, `E 7`, and `E 8`. The lemmas `E_six_eq`, `E_seven_eq`, and `E_eight_eq` identify these canonical matrices with their usual explicit forms.
## AI usage
Codex with GPT 5.6-Sol xhigh was used to assist implementing the Lean changes, which are then meticulously reviewed and adjusted by the author to align with mathlib4 styles before pushing. |
t-algebra
new-contributor
LLM-generated
label:t-algebra$ |
177/64 |
Mathlib/Algebra/Lie/SerreConstruction.lean,Mathlib/LinearAlgebra/Matrix/Cartan.lean |
2 |
9 |
['github-actions', 'ocfnash', 'sdflkjssl', 'wwylele'] |
nobody |
7-22808 7 days ago |
9-85413 9 days ago |
10-39045 10 days |
| 41991 |
dahlem author:dahlem |
fix(Analysis/Matrix): anchor the elementwise matrix norm's topology to instTopologicalSpaceMatrix |
With `open scoped Matrix.Norms.Elementwise`,
```lean
noncomputable example {m n : Type*} [Fintype m] [Fintype n] :
Norm (Matrix m n ℝ →L[ℝ] Matrix m n ℝ) := inferInstance
```
fails to synthesize, even though the norm-induced topology on `Matrix m n ℝ` is definitionally equal to the ambient `instTopologicalSpaceMatrix` (`rfl` proves the equality).
What goes wrong: the `→L[ℝ]` type is elaborated with the *direct* instance `instTopologicalSpaceMatrix`, while `ContinuousLinearMap.hasOpNorm`'s conclusion carries topologies that are *projections* of its `SeminormedAddCommGroup` arguments. During resolution, pending synthesis does find `Matrix.seminormedAddCommGroup`, but the projected topology then has to unify with `instTopologicalSpaceMatrix`, and the projection chain through `fast_instance% Pi.seminormedAddCommGroup` does not reduce to the same term. (Types like `ℝ` or `EuclideanSpace` don't hit this because they have no direct `TopologicalSpace` instance competing with the projection path — matrices do.)
**Fix**: anchor the topology field of `Matrix.seminormedAddCommGroup` / `Matrix.normedAddCommGroup` to `instTopologicalSpaceMatrix` via `PseudoMetricSpace.replaceTopology` / `MetricSpace.replaceTopology` with `rfl` proofs — the standard forgetful-inheritance pattern; the Frobenius family in the same file already achieves this through `PiLp.seminormedAddCommGroupToPi`. Anchoring to a freshly-elaborated `inferInstanceAs <| TopologicalSpace (m → n → α)` is *not* sufficient — the anchor must be the same instance term that appears in elaborated goal types, which is why this also adds `public import Mathlib.Topology.Instances.Matrix` (no cycle; that file only imports `LinearAlgebra.Matrix.*` and `Topology.Algebra.*`).
`norm`, `dist`, and the uniformity are untouched — only the packaging of the topology field changes, in the direction of the canonical instance. The fix works at Lean's default `maxSynthPendingDepth`. It also unblocks smul-continuity resolution in Fréchet-derivative developments over matrix codomains (`HasFDerivAt.const_smul` sites), where the goal's topology argument is the same non-reducing projection.
Motivation: hit in a downstream project (~4300 build jobs of matrix-valued Fréchet calculus) where ten files currently need local high-priority compat instances to work around this. A downstream repair cannot be shipped safely: boosting a repaired `SeminormedAddCommGroup`'s priority steals `‖·‖` resolution from files mixing norm scopes (e.g. `Matrix.Norms.L2Operator` sections of a Davis–Kahan development silently re-resolve to the elementwise norm). The fix has to live in the instance definitions.
Validation: full `lake build Mathlib` passes with the change (8666 jobs), plus new regression tests in `MathlibTest/MatrixNormTopology.lean` (both `rfl` agreements, the `Norm` synthesis above, `‖f‖` usage, `ContinuousConstSMul` unification).
Open questions for reviewers:
- Should the `linftyOp*` family get the same anchor for uniformity of design?
- Is `letI I := fast_instance% …; { I with … }` the preferred spelling here?
- Is the added import acceptable, or should the anchored instances move to a file that already sees `Topology.Instances.Matrix`?
Disclosure: this PR was prepared with AI assistance (Claude); the diagnosis and fix were validated by the full mathlib build and the included regression tests.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
|
t-analysis
new-contributor
LLM-generated
|
60/4 |
Mathlib/Analysis/Matrix/Normed.lean,MathlibTest/MatrixNormTopology.lean |
2 |
2 |
['github-actions'] |
nobody |
7-22412 7 days ago |
16-86296 16 days ago |
16-86284 16 days |
| 41856 |
Ruizsolveall author:Ruizsolveall |
feat(Topology/Covering): fundamental group of the circle is ℤ |
This is the promised follow-up to #40947 (see [Zulip](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/How.20to.20wisely.20state.20Homotopy.20lifting.20lemma)); most of the file is the computation that the loop `t ↦ n • t` is sent to `n : ℤ`.
---
I used Claude to navigate the quotient covering map API and for an initial frame of the proofs, which I then reworked; I understand and can vouch for all of it.
|
t-topology
new-contributor
LLM-generated
|
102/0 |
Mathlib.lean,Mathlib/Topology/Covering/FundamentalGroupCircle.lean |
2 |
2 |
['github-actions'] |
nobody |
7-21898 7 days ago |
21-30614 21 days ago |
21-30706 21 days |
| 42307 |
mcdoll author:mcdoll |
feat(Analysis): define Bessel potential spaces |
This PR defines Bessel potential or Fourier theoretic Sobolev spaces.
Material taken from github.com/mcdoll/DirichletProblem
---
As a side note: some of the theorems in `Distribution.Sobolev` will have to be reworked (and maybe the file has to be renamed).
In the future, the facts about `TemperedDistribution.MemSobolev` will be deduced from facts about `BesselPotentialSpace`, the reason being that the existence quantifier makes it impossible to track the `Lp` function, which makes it really hard to prove continuity statements.
This is more related to the properties of interesting operations such as the Sobolev embedding theorem and the trace theorem and I don't think that deducing `MemSobolev.add` from the bundled version saves any lines.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
289/0 |
Mathlib.lean,Mathlib/Analysis/FunctionalSpaces/BesselPotentialSpace.lean |
2 |
2 |
['github-actions'] |
nobody |
7-20265 7 days ago |
7-20909 7 days ago |
7-20897 7 days |
| 42281 |
grunweg author:grunweg |
chore: tweak API for modelWithCornersEuclideanHalfSpace |
- un-simp `modelWithCornersEuclideanHalfSpace_toFun`: in applications, this is not always the change you want to make.
- instead, add an _apply lemma (and make that simp); that's much better
- add `modelWithCornersEuclideanHalfSpace_symm_apply_of_le`, a more useful version of `modelWithCornersEuclideanHalfSpace_symm_apply`. It cannot be used to golf proofs easily, but it's a *much* more useful rewrite lemma.
- add analogous lemmas for `modelWithCornersEuclideanQuadrant`
Inspired by questions arising in `scholzhannah`'s master's thesis.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
maintainer-merge
|
23/1 |
Mathlib/Geometry/Manifold/Instances/Real.lean |
1 |
10 |
['github-actions', 'grunweg', 'scholzhannah'] |
scholzhannah assignee:scholzhannah |
7-13922 7 days ago |
7-24587 7 days ago |
8-21359 8 days |
| 42128 |
SnirBroshi author:SnirBroshi |
feat(Order/UpperLower/CompleteLattice): induce the `PartialOrder` for `LowerSet`s from `SetLike` |
Now `#synth IsConcreteLE (LowerSet α) α` works so `SetLike.coe_subset_coe` and the like can be used with `LowerSet`s.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
4/1 |
Mathlib/Order/Birkhoff.lean,Mathlib/Order/UpperLower/CompleteLattice.lean |
2 |
1 |
['github-actions'] |
nobody |
6-83848 6 days ago |
6-85623 6 days ago |
7-421 7 days |
| 41869 |
FawadHa1der author:FawadHa1der |
perf(FieldTheory/RatFunc/Valuation): explicit proof instead of aesop |
A little longer explicit proof but may be bench will show it could be worth it. |
new-contributor
t-algebra
will-close-soon
label:t-algebra$ |
8/2 |
Mathlib/FieldTheory/RatFunc/Valuation.lean |
1 |
8 |
['FawadHa1der', 'github-actions', 'grunweg', 'leanprover-radar'] |
nobody |
6-80814 6 days ago |
6-80814 6 days ago |
6-83697 6 days |
| 40925 |
JovanGerb author:JovanGerb |
chore(CategoryTheory/Functor/Category): don't expose `NatTrans.hcomp` |
This PR hides the definition of `NatTrans.hcomp`, because it has two equally sensible possible definitions. As a result, we can get rid of the `to_dual_insert_cast`. `simps` doesn't work for non-exposed definition, so `hcomp_app` is proved separately, and its dual `hcomp_app'` is added.
Note: some proofs break, because the `dsimp` set changes, due to the definition not being exposed. This is a bit unfortunate. There was some discussion on Zulip about changing `dsimp` for category theory into a simp set, which would fix this problem, because we could then add `hcomp_app` to this set.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
maintainer-merge
tech debt
|
31/17 |
Mathlib/Algebra/Homology/HomologicalComplex.lean,Mathlib/AlgebraicTopology/DoldKan/NCompGamma.lean,Mathlib/AlgebraicTopology/DoldKan/PInfty.lean,Mathlib/CategoryTheory/Functor/Category.lean,Mathlib/CategoryTheory/Monoidal/Action/End.lean,Mathlib/CategoryTheory/Monoidal/End.lean,Mathlib/CategoryTheory/Triangulated/TStructure/SpectralObject.lean,Mathlib/CategoryTheory/Types/Basic.lean |
8 |
20 |
['JovanGerb', 'github-actions', 'grunweg', 'leanprover-radar', 'mathlib-merge-conflicts', 'riccardobrasca'] |
nobody |
6-78780 6 days ago |
6-79744 6 days ago |
44-49030 44 days |
| 40728 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Hasse): more properties of Hasse graphs of linear orders |
- two forms of an intermediate value theorem for linear orders
- the Hasse graph of a linear order is acyclic
- a path graph is locally finite
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
large-import
|
99/24 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/CycleGraph.lean,Mathlib/Combinatorics/SimpleGraph/Hasse.lean,Mathlib/Data/Fintype/Defs.lean |
4 |
23 |
['Formalistic03', 'SnirBroshi', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
6-78770 6 days ago |
6-81870 6 days ago |
45-68789 45 days |
| 38534 |
AlexeyMilovanov author:AlexeyMilovanov |
refactor(Computability): bundle PFun into a structure with FunLike instance |
This PR refactors `PFun` from `def PFun α β := α → Part β` to a structure with a `FunLike` instance.
[Discussion](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Fix.20for.20fun_prop.20on.20PFun.20.28context.3A.20Computability.20Theory.29)
### Main changes
* `PFun` is now a structure with a single field `toFun : α → Part β`.
* Added the `FunLike (α →. β) α (Part β)` instance and `initialize_simps_projections`.
* Added the basic projection/application simp lemmas needed for the structure wrapper.
* Definitions which used to return raw lambdas as partial functions now explicitly use `PFun.mk` or `PFun.lift`.
* Equality proofs for partial functions now use `PFun.ext` / `DFunLike.ext` where `funext` no longer applies directly.
### Downstream impact
The refactor mainly impacts Computability Theory and Category Theory (`Category/PartialFun.lean`). Since `PFun` is no longer definitionally equal to `α → Part β`, tactics such as `rfl`, `simp`, and `funext` can no longer always see through the old raw-function representation.
As a result, several proofs (e.g. `fix_aux`, `ppred`, `mem_eval`, and `unitIso`) grew in size, requiring explicit `ext` + `simp` breakdowns. I tried to keep these proof changes minimal; further golfing suggestions are very welcome. It seems that fully recovering the old brevity in some places may require additional `PFun`-specific API/congruence support, which I avoided adding in this PR to keep the diff minimal.
### Affected files
* **Core:** `Mathlib/Data/PFun.lean`
* **Computability:** `Partrec`, `PartrecBasis`, `PartrecCode`, `RE`, `RecursiveIn`, `Ackermann`, `StateTransition`, `TuringDegree`, `TuringMachine/Config`
* **Category Theory:** `Category/PartialFun.lean`
* **Other:** `Data/Finset/PImage.lean`, `NumberTheory/Dioph.lean`
This also removes the previous `set_option linter.flexible false` workaround and the local transparency workaround in `TuringMachine/Config.lean`, as well as the local transparency workarounds in `Category/PartialFun.lean`.
### Note on LLM usage
The core `PFun` change caused numerous downstream errors. I initially used an LLM to help draft fixes for these files. Afterwards, I spent a significant amount of time manually correcting and modifying all of the generated changes.
|
new-contributor
t-computability
tech debt
LLM-generated
|
546/486 |
Mathlib/CategoryTheory/Category/PartialFun.lean,Mathlib/Computability/Ackermann.lean,Mathlib/Computability/Partrec.lean,Mathlib/Computability/PartrecBasis.lean,Mathlib/Computability/PartrecCode.lean,Mathlib/Computability/RE.lean,Mathlib/Computability/RecursiveIn.lean,Mathlib/Computability/StateTransition.lean,Mathlib/Computability/TuringDegree.lean,Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Data/Finset/PImage.lean,Mathlib/Data/PFun.lean,Mathlib/NumberTheory/Dioph.lean |
13 |
40 |
['AlexeyMilovanov', 'JovanGerb', 'YaelDillies', 'dagurtomas', 'github-actions', 'j-loreaux', 'mathlib-bors', 'mathlib-merge-conflicts'] |
YaelDillies assignee:YaelDillies |
6-76403 6 days ago |
6-76403 6 days ago |
76-71797 76 days |
| 41378 |
tb65536 author:tb65536 |
chore(RingTheory/QuasiFinite/Basic): extract instance from ramification proof |
This PR extracts an instance from the proof of `Ideal.ramificationIdx_pos`. This is a prerequisite for #41377.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
13/7 |
Mathlib/RingTheory/QuasiFinite/Basic.lean,Mathlib/RingTheory/RamificationInertia/Ramification.lean |
2 |
1 |
['github-actions'] |
nobody |
6-75402 6 days ago |
33-65197 33 days ago |
33-65186 33 days |
| 42093 |
DrDMT-VR author:DrDMT-VR |
feat(Topology/Algebra/Ring): topological closure of a two-sided ideal |
Defines `TwoSidedIdeal.closure`, the topological closure of a two-sided ideal in a
topological ring, together with its basic API. This mirrors the existing one-sided
`Ideal.closure` (`Mathlib/Topology/Algebra/Ring/Ideal.lean`), but is stated in the
generality of non-unital non-associative topological rings (`IsTopologicalRing` over
`NonUnitalNonAssocRing`), where one-sided ideals are unavailable.
New declarations (namespace `TwoSidedIdeal`): `closure`, `coe_closure`,
`mem_closure_iff`, `le_closure`, `closure_mono`, `closure_minimal`, `isClosed_closure`,
`closure_eq_of_isClosed`, `closure_closure`, `closure_top`, and `closure_ne_top` (in a
unital ring whose units are open, e.g. a Banach algebra via `Units.isOpen`, the closure of
a proper two-sided ideal is proper).
Mathlib has no topological-closure API for `TwoSidedIdeal`. Closed two-sided ideals are
the basic objects of C*-algebra ideal theory, and `closure_ne_top` is the standard first
step toward "maximal two-sided ideals are closed".
------
- should the definition be called `topologicalClosure` instead? (The current name matches `Ideal.closure`.)
- Claude was utilized throughout the project. It helped with coding, syntax and running repetitive testing.
|
t-topology
new-contributor
LLM-generated
|
114/0 |
Mathlib.lean,Mathlib/Topology/Algebra/Ring/TwoSidedIdeal.lean |
2 |
5 |
['FractalDevTeam', 'github-actions', 'grunweg'] |
nobody |
6-73559 6 days ago |
7-9389 7 days ago |
12-72802 12 days |
| 42209 |
xroblot author:xroblot |
feat(Algebra/QuadraticAlgebra): change of generator |
Add `QuadraticAlgebra.map`, the `R`-algebra map induced by a change of generator `ω ↦ u • ω + k`, and `QuadraticAlgebra.mapEquiv`, its packaging as an isomorphism when `u` is a unit.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
54/1 |
Mathlib/Algebra/QuadraticAlgebra/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
6-70588 6 days ago |
6-71111 6 days ago |
9-15095 9 days |
| 42296 |
xroblot author:xroblot |
feat(Algebra/Ring/Int/Parity): add Int.sq_emod_four and relocate square-mod-four lemma |
Add `Int.sq_emod_four : b ^ 2 % 4 = b % 2`, and move the existing `Int.sq_mod_four_eq_one_of_odd` and `(Nat/Int).eight_dvd_sq_sub_one_of_odd` from `NumberTheory.Multiplicity` to the basic `Parity` files, their natural home.
|
|
16/18 |
Mathlib/Algebra/Ring/Int/Parity.lean,Mathlib/Algebra/Ring/Parity.lean,Mathlib/NumberTheory/Multiplicity.lean |
3 |
4 |
['github-actions', 'themathqueen', 'xroblot'] |
nobody |
6-69573 6 days ago |
7-45307 7 days ago |
7-45589 7 days |
| 39368 |
gasparattila author:gasparattila |
feat: homogenization of an affine space |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
* Alternative to #39431
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
405/0 |
Mathlib.lean,Mathlib/LinearAlgebra/AffineSpace/Homogenization.lean,docs/references.bib |
3 |
27 |
['eric-wieser', 'gasparattila', 'github-actions', 'themathqueen'] |
mattrobball assignee:mattrobball |
6-67877 6 days ago |
45-5525 45 days ago |
84-35904 84 days |
| 41190 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): functors which preserve κ-presentable objects |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
62/1 |
Mathlib.lean,Mathlib/CategoryTheory/Presentable/Basic.lean,Mathlib/CategoryTheory/Presentable/PreservesCardinalPresentable.lean |
3 |
3 |
['github-actions', 'smorel394'] |
robin-carlier assignee:robin-carlier |
6-67876 6 days ago |
38-35303 38 days ago |
38-35291 38 days |
| 42210 |
seewoo5 author:seewoo5 |
feat(NumberTheory/ModularForms): `E₂` is 1-periodic |
Add `E2_T_transform`, `E2_T_smul` and `E2_periodic`. Used in Sphere packing project; written with Claude Opus 5.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
LLM-generated
sphere-packing
|
26/0 |
Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Transform.lean |
1 |
1 |
['github-actions'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
6-67875 6 days ago |
9-63728 9 days ago |
9-63716 9 days |
| 42308 |
Scarlett-le author:Scarlett-le |
feat(Geometry/Euclidean/Sphere/SecondInter): add secondInter difference lemmas |
This PR adds formulas for the difference and distance between the values of
`Sphere.secondInter` associated with two sphere centers and a common base point
and direction.
The general statements do not require the direction to have norm one. Convenient
unit-direction corollaries are provided as well:
- `Sphere.secondInter_vsub_secondInter`
- `Sphere.secondInter_vsub_secondInter_of_norm_eq_one`
- `Sphere.dist_secondInter_secondInter`
- `Sphere.dist_secondInter_secondInter_of_norm_eq_one`
The results describe how the second intersection changes when the sphere center
is changed, and provide both vector-valued and distance formulations. |
t-euclidean-geometry |
31/0 |
Mathlib/Geometry/Euclidean/Sphere/SecondInter.lean |
1 |
1 |
['github-actions', 'wwylele'] |
jsm28 assignee:jsm28 |
6-67874 6 days ago |
7-13271 7 days ago |
7-13259 7 days |
| 41792 |
JovanGerb author:JovanGerb |
chore(Order/CompleteBooleanAlgebra): use `to_dual` |
This PR uses `to_dual` in `Mathlib/Order/CompleteBooleanAlgebra`.
- `Frame.mk` and `Coframe.mk` are annoyingly not dual to eachother due to the way in which `GeneralizedHeytingAlgebra` and `GeneralizedCoheytingAlgebra` are not dual to eachother.
- The `MinimalAxioms` structures have been refactored into a more natural form. Firstly, they should not be classes since they should not be used in type class search. Additionally, instead of extending `CompleteLattice`, they now take it as a parameter, so that we can easily talk about the order operations. As a result, the `MinimalAxioms` structures live in `Prop`. Some lemmas about `MinimalAxioms` have been marked `private`, since these are not meant to be used anywhere else.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
131/232 |
Mathlib/Combinatorics/SimpleGraph/Subgraph.lean,Mathlib/Data/Fintype/Order.lean,Mathlib/Order/CompleteBooleanAlgebra.lean,Mathlib/Order/CompleteLattice/Defs.lean,Mathlib/Order/Nucleus.lean,Mathlib/Order/Sublocale.lean,Mathlib/Order/UpperLower/CompleteLattice.lean,Mathlib/Tactic/Translate/ToDual.lean,Mathlib/Topology/Sets/Closeds.lean,Mathlib/Topology/Sets/Opens.lean |
10 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
6-61562 6 days ago |
6-64681 6 days ago |
8-54995 8 days |
| 42317 |
plp127 author:plp127 |
chore(Topology/Separation): generalize theorems on `IndiscreteTopology` |
Generalize some theorems on `IndiscreteTopology` from `EMetricSpace` to `T0Space`. Also move `subsingleton_iff_discrete_and_indiscrete` to an earlier file because it has an easier proof.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
27/16 |
Mathlib/Topology/EMetricSpace/Basic.lean,Mathlib/Topology/Separation/Basic.lean,Mathlib/Topology/Separation/Connected.lean |
3 |
13 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'plp127'] |
nobody |
6-60321 6 days ago |
6-67337 6 days ago |
6-67325 6 days |
| 38965 |
joelriou author:joelriou |
feat(AlgebraicTopology/SimplicialSet/Homology): extension of scalars |
If `X` is a simplicial set, `R₁ →+* R₂` is a morphism of commutative rings, and `M₁` is a `R₁`-module, then the chain complex of `R₂`-modules of `X` with coefficients in `R₂ ⊗[R₁] M₁` identifies to the extensions of scalars of the chain complex of `R₁`-modules of `X` with coefficients in `M₁`. In this file, we obtain a formulation of this result where the extension of scalars functor `ModuleCat R₁ ⥤ ModuleCat R₂` is replaced by an arbitrary functor `F : C ⥤ D` which commutes with coproducts.
(As `SimplicialObject` is now an `abbrev` for a category of functors, `SimplicialObject.whiskering` is also made an abbrev here.)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology |
140/36 |
Mathlib.lean,Mathlib/Algebra/Homology/Additive.lean,Mathlib/Algebra/Homology/HomologicalComplex.lean,Mathlib/AlgebraicTopology/AlternatingFaceMapComplex.lean,Mathlib/AlgebraicTopology/SimplicialObject/Basic.lean,Mathlib/AlgebraicTopology/SimplicialSet/Homology/MapHomologicalComplex.lean,Mathlib/AlgebraicTopology/SingularHomology/Basic.lean,Mathlib/CategoryTheory/Limits/Preserves/SigmaConst.lean,Mathlib/CategoryTheory/Limits/Shapes/Products.lean |
9 |
12 |
['dagurtomas', 'github-actions', 'joelriou', 'mathlib-merge-conflicts', 'robin-carlier'] |
dagurtomas assignee:dagurtomas |
6-59572 6 days ago |
6-60834 6 days ago |
45-30359 45 days |
| 42310 |
themathqueen author:themathqueen |
feat(Analysis/Convex/Strict/Extreme): `star (extremePoints 𝕜 s) = extremePoints 𝕜 (star s)` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Or can go in a new file `Convex/StarModule` or something?
~~Note that the proofs can and will be simplified using `image_segment`, `image_openSegment` and `image_extremePoints` after #42311.~~ Nevermind, I don't think so.
[](https://gitpod.io/from-referrer/)
|
t-analysis |
30/0 |
Mathlib/Analysis/Convex/Extreme.lean |
1 |
1 |
['github-actions'] |
nobody |
6-55542 6 days ago |
7-4659 7 days ago |
7-4647 7 days |
| 42320 |
joelriou author:joelriou |
feat(CategoryTheory/Galois): full subcategories |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
97/3 |
Mathlib.lean,Mathlib/CategoryTheory/Galois/Basic.lean,Mathlib/CategoryTheory/Galois/Examples.lean,Mathlib/CategoryTheory/Galois/FullSubcategory.lean |
4 |
1 |
['github-actions'] |
nobody |
6-50817 6 days ago |
6-51419 6 days ago |
6-51407 6 days |
| 40013 |
WilliamCoram author:WilliamCoram |
feat: define bounded sets and power bounded elements |
We define bounded sets, so that we can define power bounded elements in a topological ring. Using this we generalise some notions of topoligcally nilpotent elements and define a residue field.
AI usage: some proofs were initially generated with Claude code before being cleaned and/or rewritten by hand.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
LLM-generated
large-import
|
431/5 |
Mathlib.lean,Mathlib/Topology/Algebra/Bounded.lean,Mathlib/Topology/Algebra/PowerBounded.lean,Mathlib/Topology/Algebra/TopologicallyNilpotent.lean |
4 |
16 |
['ADedecker', 'CBirkbeck', 'WilliamCoram', 'github-actions', 'mathlib-merge-conflicts', 'sfingali', 'vihdzp', 'wwylele'] |
nobody |
6-43233 6 days ago |
46-18018 46 days ago |
62-133 62 days |
| 42314 |
sfingali author:sfingali |
feat(RingTheory): continuous valuations |
### Summary
Defines continuous valuations on topological rings: a valuation `v : A → Γ₀`
whose underlying function is continuous for the order topology on `Γ₀`
(Wedhorn, *Adic Spaces*, arXiv:1910.05934, Def. 7.7 and Rem. 7.8(1), p. 58).
* `ContinuousValuationClass` — the class of continuous valuations: a
`ValuationClass` whose functions are continuous.
* `ContinuousValuation` — a bundled continuous valuation.
* `ContinuousValuation.isOpen_lt` — the primary definition of Wedhorn,
Def. 7.7: `{a | v a < γ}` is open for every `γ`.
This is the second step of an adic/perfectoid pipeline (Huber rings → Huber
pairs → continuous valuations → Spa → perfectoid → tilting); #42312 defines
Huber rings. The subspace `Cont(A) ⊆ Spv(A)` of continuous valuations
(Wedhorn, p. 58) will build on `ValuationSpectrum` once #38009 lands — this
PR provides the element-level notion, which is independent of the spectrum
topology.
### References
* T. Wedhorn, *Adic Spaces*, arXiv:1910.05934, Def. 7.7, Rem. 7.8 (p. 58).
|
t-ring-theory
new-contributor
|
99/0 |
Mathlib.lean,Mathlib/RingTheory/Valuation/ContinuousValuation.lean |
2 |
2 |
['github-actions'] |
nobody |
6-42223 6 days ago |
6-72558 6 days ago |
6-73092 6 days |
| 42312 |
sfingali author:sfingali |
feat(Topology): huber (f-adic) rings |
### Summary
Defines Huber (f-adic) rings: topological rings admitting an open subring whose
subspace topology is the `I`-adic topology for a finitely generated ideal `I`
(Wedhorn, *Adic Spaces*, arXiv:1910.05934, Prop. and Def. 6.1, p. 46).
* `HuberRing.RingOfDefinition` — the pair of definition `(A₀, I)`: an open subring
`A₀ ⊆ A` with `IsAdic I` for a finitely generated ideal `I` of `A₀` (data).
* `HuberRing.IsHuberRing` — a topological ring admitting a ring of definition
(property).
* `HuberRing.ringOfDefinition_iff_open_adic` — Wedhorn, Lemma 6.2 (a) ↔ (b), p. 46:
a subring is a ring of definition iff it is open and adic.
This is the first step of a planned adic/perfectoid pipeline (Huber rings →
Huber pairs → continuous valuations → Spa → perfectoid fields → tilting), following
the design of the Lean 3 `lean-perfectoid-spaces` project (ring of definition as
data, Huber ring as a property). Follow-ups (depending on #40013's boundedness):
Lemma 6.2 (c) (ring of definition ⟺ open + bounded) and Cor. 6.4(3) (the
power-bounded elements form a subring, the union of all rings of definition).
### References
* T. Wedhorn, *Adic Spaces*, arXiv:1910.05934, Prop. and Def. 6.1, Lemma 6.2,
Cor. 6.4 (pp. 46–47).
|
t-topology
new-contributor
|
84/0 |
Mathlib.lean,Mathlib/Topology/Algebra/Nonarchimedean/HuberRing.lean |
2 |
3 |
['github-actions'] |
nobody |
6-42200 6 days ago |
6-72663 6 days ago |
6-73320 6 days |
| 42323 |
joelriou author:joelriou |
feat(Algebra/Homology): homotopy equivalences in degreewise split short exact sequences |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
t-algebra
label:t-algebra$ |
150/5 |
Mathlib.lean,Mathlib/Algebra/Homology/Embedding/Extend.lean,Mathlib/Algebra/Homology/Embedding/Splitting.lean,Mathlib/Algebra/Homology/HomotopyCategory/ChainComplex.lean,Mathlib/Algebra/Homology/HomotopyCategory/DegreewiseSplit.lean,Mathlib/Algebra/Homology/ShortComplex/Exact.lean |
6 |
1 |
['github-actions'] |
nobody |
6-42030 6 days ago |
6-42760 6 days ago |
6-42748 6 days |
| 41073 |
vlad902 author:vlad902 |
feat(RingTheory): characterizing lemma for rings of infinite Krull dimension |
Show that the Krull dimension of a ring R is infinite if and only if it has ideals of unbounded height.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
17/0 |
Mathlib/RingTheory/Ideal/Height.lean |
1 |
1 |
['github-actions'] |
nobody |
6-33837 6 days ago |
42-27899 42 days ago |
42-28815 42 days |
| 41074 |
vlad902 author:vlad902 |
feat(RingTheory): a ring is nontrivial iff it has nontrivial Krull dimension |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
15/4 |
Mathlib/Order/WithBot.lean,Mathlib/RingTheory/KrullDimension/Basic.lean |
2 |
4 |
['github-actions', 'tb65536', 'vlad902'] |
nobody |
6-33260 6 days ago |
42-27649 42 days ago |
42-27637 42 days |
| 41962 |
juanjomadrigal author:juanjomadrigal |
feat(Counterexamples): the space ω₁ |
Introduce the `ω₁` ordinal space that, when given the order topology, may be used to build some nice counterexamples in general topology, namely
- A subspace of a paracompact space need not be paracompact
- The product of two normal spaces need not be normal
- A subspace of a normal space need not be normal
- A regular space need not be normal
This PR introduces the basic definitions and order-theoretic properties, in order to have a good set of tools to work with.
---
Subsequent commits / PRs would roughly cover:
- Topology definitions in that space
- Compactness (and non-compactness) properties
- Countability properties
- Non-metrizability
- Each of the properties above
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-topology
|
152/0 |
Counterexamples.lean,Counterexamples/Omega1Space.lean |
2 |
67 |
['FrankieNC', 'felixpernegger', 'github-actions', 'grunweg', 'j-loreaux', 'juanjomadrigal', 'plp127', 'vihdzp'] |
nobody |
6-32820 6 days ago |
6-32820 6 days ago |
14-56983 14 days |
| 42329 |
dependabot author:dependabot |
chore(deps): bump the actions-version-updates group across 1 directory with 11 updates |
Bumps the actions-version-updates group with 11 updates in the /.github/workflows directory:
| Package | From | To |
| --- | --- | --- |
| [actions/checkout](https://github.com/actions/checkout) | `6.0.3` | `7.0.1` |
| [actions/setup-python](https://github.com/actions/setup-python) | `6.3.0` | `7.0.0` |
| [reviewdog/action-actionlint](https://github.com/reviewdog/action-actionlint) | `1.72.0` | `1.73.0` |
| [GrantBirki/comment](https://github.com/grantbirki/comment) | `3.0.0` | `3.0.3` |
| [marocchino/sticky-pull-request-comment](https://github.com/marocchino/sticky-pull-request-comment) | `3.0.4` | `3.0.5` |
| [zulip/github-actions-zulip/send-message](https://github.com/zulip/github-actions-zulip) | `2.0.1` | `2.0.2` |
| [docker/login-action](https://github.com/docker/login-action) | `4.2.0` | `4.6.0` |
| [docker/metadata-action](https://github.com/docker/metadata-action) | `6.1.0` | `6.2.0` |
| [docker/build-push-action](https://github.com/docker/build-push-action) | `7.2.0` | `7.3.0` |
| [corentinmusard/otel-cicd-action](https://github.com/corentinmusard/otel-cicd-action) | `4.0.1` | `4.1.0` |
| [softprops/action-gh-release](https://github.com/softprops/action-gh-release) | `3.0.1` | `3.0.2` |
Updates `actions/checkout` from 6.0.3 to 7.0.1
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/actions/checkout/releases">actions/checkout's releases</a>.</em></p>
<blockquote>
<h2>v7.0.1</h2>
<h2>What's Changed</h2>
<ul>
<li>skip running unsafe pr check if input is default by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2518">actions/checkout#2518</a></li>
<li>trim only ascii whitespace for branch by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2521">actions/checkout#2521</a></li>
<li>escape values passed to --unset by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2530">actions/checkout#2530</a></li>
<li>Various dependency updates</li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/actions/checkout/compare/v7...v7.0.1">https://github.com/actions/checkout/compare/v7...v7.0.1</a></p>
<h2>v7.0.0</h2>
<h2>What's Changed</h2>
<ul>
<li>block checking out fork pr for pull_request_target and workflow_run by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2454">actions/checkout#2454</a></li>
<li>Bump actions/publish-immutable-action from 0.0.3 to 0.0.4 in the minor-actions-dependencies group across 1 directory by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/checkout/pull/2458">actions/checkout#2458</a></li>
<li>Bump flatted from 3.3.1 to 3.4.2 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/checkout/pull/2460">actions/checkout#2460</a></li>
<li>Bump js-yaml from 4.1.0 to 4.2.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/checkout/pull/2461">actions/checkout#2461</a></li>
<li>Bump <code>@actions/core</code> and <code>@actions/tool-cache</code> and Remove uuid by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/checkout/pull/2459">actions/checkout#2459</a></li>
<li>upgrade module to esm and update dependencies by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2463">actions/checkout#2463</a></li>
<li>Bump the minor-npm-dependencies group across 1 directory with 3 updates by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/checkout/pull/2462">actions/checkout#2462</a></li>
<li>getting ready for checkout v7 release by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2464">actions/checkout#2464</a></li>
<li>update error wording by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2467">actions/checkout#2467</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> made their first contribution in <a href="https://redirect.github.com/actions/checkout/pull/2454">actions/checkout#2454</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/actions/checkout/compare/v6.0.3...v7.0.0">https://github.com/actions/checkout/compare/v6.0.3...v7.0.0</a></p>
<h2>v6.1.0</h2>
<h2>What's Changed</h2>
<ul>
<li><strong>[BREAKING]</strong> backport <code>allow-unsafe-pr-checkout</code> to v6 by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2500">actions/checkout#2500</a></li>
<li>backport fixes to releases-v6 by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2527">actions/checkout#2527</a></li>
</ul>
<p><a href="https://github.blog/changelog/2026-06-18-safer-pull_request_target-defaults-for-github-actions-checkout/">https://github.blog/changelog/2026-06-18-safer-pull_request_target-defaults-for-github-actions-checkout/</a> for more details about this breaking change</p>
<p><strong>Full Changelog</strong>: <a href="https://github.com/actions/checkout/compare/v6.0.3...v6.1.0">https://github.com/actions/checkout/compare/v6.0.3...v6.1.0</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/actions/checkout/blob/main/CHANGELOG.md">actions/checkout's changelog</a>.</em></p>
<blockquote>
<h1>Changelog</h1>
<h2>v7.0.1</h2>
<ul>
<li>Skip running unsafe pr check if input is default by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2518">actions/checkout#2518</a></li>
<li>Trim only ascii whitespace for branch by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2521">actions/checkout#2521</a></li>
<li>Escape values passed to --unset by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2530">actions/checkout#2530</a></li>
<li>Various dependency updates</li>
</ul>
<h2>v7.0.0</h2>
<ul>
<li>Block checking out fork PR for pull_request_target and workflow_run by <a href="https://github.com/aiqiaoy"><code>@aiqiaoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2454">actions/checkout#2454</a></li>
<li>Various dependency updates</li>
</ul>
<h2>v6.0.3</h2>
<ul>
<li>Fix checkout init for SHA-256 repositories by <a href="https://github.com/yaananth"><code>@yaananth</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2439">actions/checkout#2439</a></li>
<li>fix: expand merge commit SHA regex and add SHA-256 test cases by <a href="https://github.com/yaananth"><code>@yaananth</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2414">actions/checkout#2414</a></li>
</ul>
<h2>v6.0.2</h2>
<ul>
<li>Fix tag handling: preserve annotations and explicit fetch-tags by <a href="https://github.com/ericsciple"><code>@ericsciple</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2356">actions/checkout#2356</a></li>
</ul>
<h2>v6.0.1</h2>
<ul>
<li>Add worktree support for persist-credentials includeIf by <a href="https://github.com/ericsciple"><code>@ericsciple</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2327">actions/checkout#2327</a></li>
</ul>
<h2>v6.0.0</h2>
<ul>
<li>Persist creds to a separate file by <a href="https://github.com/ericsciple"><code>@ericsciple</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2286">actions/checkout#2286</a></li>
<li>Update README to include Node.js 24 support details and requirements by <a href="https://github.com/salmanmkc"><code>@salmanmkc</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2248">actions/checkout#2248</a></li>
</ul>
<h2>v5.0.1</h2>
<ul>
<li>Port v6 cleanup to v5 by <a href="https://github.com/ericsciple"><code>@ericsciple</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2301">actions/checkout#2301</a></li>
</ul>
<h2>v5.0.0</h2>
<ul>
<li>Update actions checkout to use node 24 by <a href="https://github.com/salmanmkc"><code>@salmanmkc</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2226">actions/checkout#2226</a></li>
</ul>
<h2>v4.3.1</h2>
<ul>
<li>Port v6 cleanup to v4 by <a href="https://github.com/ericsciple"><code>@ericsciple</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2305">actions/checkout#2305</a></li>
</ul>
<h2>v4.3.0</h2>
<ul>
<li>docs: update README.md by <a href="https://github.com/motss"><code>@motss</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/1971">actions/checkout#1971</a></li>
<li>Add internal repos for checking out multiple repositories by <a href="https://github.com/mouismail"><code>@mouismail</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/1977">actions/checkout#1977</a></li>
<li>Documentation update - add recommended permissions to Readme by <a href="https://github.com/benwells"><code>@benwells</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2043">actions/checkout#2043</a></li>
<li>Adjust positioning of user email note and permissions heading by <a href="https://github.com/joshmgross"><code>@joshmgross</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2044">actions/checkout#2044</a></li>
<li>Update README.md by <a href="https://github.com/nebuk89"><code>@nebuk89</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2194">actions/checkout#2194</a></li>
<li>Update CODEOWNERS for actions by <a href="https://github.com/TingluoHuang"><code>@TingluoHuang</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2224">actions/checkout#2224</a></li>
<li>Update package dependencies by <a href="https://github.com/salmanmkc"><code>@salmanmkc</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/2236">actions/checkout#2236</a></li>
</ul>
<h2>v4.2.2</h2>
<ul>
<li><code>url-helper.ts</code> now leverages well-known environment variables by <a href="https://github.com/jww3"><code>@jww3</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/1941">actions/checkout#1941</a></li>
<li>Expand unit test coverage for <code>isGhes</code> by <a href="https://github.com/jww3"><code>@jww3</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/1946">actions/checkout#1946</a></li>
</ul>
<h2>v4.2.1</h2>
<ul>
<li>Check out other refs/* by commit if provided, fall back to ref by <a href="https://github.com/orhantoy"><code>@orhantoy</code></a> in <a href="https://redirect.github.com/actions/checkout/pull/1924">actions/checkout#1924</a></li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/actions/checkout/commit/3d3c42e5aac5ba805825da76410c181273ba90b1"><code>3d3c42e</code></a> prep v7.0.1 release (<a href="https://redirect.github.com/actions/checkout/issues/2531">#2531</a>)</li>
<li><a href="https://github.com/actions/checkout/commit/28802689a136bfcdb721715abd713740beecbe07"><code>2880268</code></a> escape values passed to --unset (<a href="https://redirect.github.com/actions/checkout/issues/2530">#2530</a>)</li>
<li><a href="https://github.com/actions/checkout/commit/12cd2235efa0937479335606d7c3ac9f6c0973b1"><code>12cd223</code></a> trim only ascii whitespace for branch (<a href="https://redirect.github.com/actions/checkout/issues/2521">#2521</a>)</li>
<li><a href="https://github.com/actions/checkout/commit/62661c4e71a304b2823ed026347b8d34c3eac541"><code>62661c4</code></a> skip running unsafe pr check if input is default (<a href="https://redirect.github.com/actions/checkout/issues/2518">#2518</a>)</li>
<li><a href="https://github.com/actions/checkout/commit/e8d4307400f9427dba7cb98e488d6ab85f1cec5f"><code>e8d4307</code></a> Bump the minor-actions-dependencies group with 2 updates (<a href="https://redirect.github.com/actions/checkout/issues/2499">#2499</a>)</li>
<li><a href="https://github.com/actions/checkout/commit/631c942040754b6e095e929c1677c07e10ed4f87"><code>631c942</code></a> eslint 9 (<a href="https://redirect.github.com/actions/checkout/issues/2474">#2474</a>)</li>
<li><a href="https://github.com/actions/checkout/commit/4f1f4aec02e41874fa0262ea8ff5172d7978ad1e"><code>4f1f4ae</code></a> Bump actions/upload-artifact from 4 to 7 (<a href="https://redirect.github.com/actions/checkout/issues/2476">#2476</a>)</li>
<li><a href="https://github.com/actions/checkout/commit/ba097532fb203f7e88c9c3c0b899b49469908a92"><code>ba09753</code></a> Bump actions/checkout from 6 to 7 (<a href="https://redirect.github.com/actions/checkout/issues/2488">#2488</a>)</li>
<li><a href="https://github.com/actions/checkout/commit/b9e0990d219a03df7633c93f6f005a8fecbcab22"><code>b9e0990</code></a> Bump docker/login-action from 3.3.0 to 4.2.0 (<a href="https://redirect.github.com/actions/checkout/issues/2479">#2479</a>)</li>
<li><a href="https://github.com/actions/checkout/commit/e8cb398be4a550817e382abf69e4c12c76fce1f2"><code>e8cb398</code></a> Bump docker/build-push-action from 6.5.0 to 7.2.0 (<a href="https://redirect.github.com/actions/checkout/issues/2478">#2478</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/actions/checkout/compare/v6.0.3...3d3c42e5aac5ba805825da76410c181273ba90b1">compare view</a></li>
</ul>
</details>
<br />
Updates `actions/setup-python` from 6.3.0 to 7.0.0
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/actions/setup-python/releases">actions/setup-python's releases</a>.</em></p>
<blockquote>
<h2>v7.0.0</h2>
<h2>What's Changed</h2>
<h3>Enhancements</h3>
<ul>
<li>Migrate to ESM and upgrade dependencies by <a href="https://github.com/priyagupta108"><code>@priyagupta108</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1330">actions/setup-python#1330</a></li>
<li>Pin SHA commits and update docs with latest versions by <a href="https://github.com/HarithaVattikuti"><code>@HarithaVattikuti</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1338">actions/setup-python#1338</a></li>
<li>Remove the pip-install input by <a href="https://github.com/gowridurgad"><code>@gowridurgad</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1336">actions/setup-python#1336</a></li>
</ul>
<h3>Bug Fix</h3>
<ul>
<li>Fix to Classify stderr warning messages as warnings instead of errors in annotations by <a href="https://github.com/lmvysakh"><code>@lmvysakh</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1335">actions/setup-python#1335</a></li>
<li>Validate and retry manifest fetch to prevent silent failures by <a href="https://github.com/priyagupta108"><code>@priyagupta108</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1332">actions/setup-python#1332</a></li>
</ul>
<h3>Dependency Upgrade</h3>
<ul>
<li>Bump certifi from 2020.6.20 to 2024.7.4 in /<strong>tests</strong>/data by <a href="https://github.com/dependabot"><code>@dependabot</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1328">actions/setup-python#1328</a></li>
<li>Remove EOL Python versions and Bumps numpy text fixture by <a href="https://github.com/priya-kinthali"><code>@priya-kinthali</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1333">actions/setup-python#1333</a></li>
<li>Upgrade <code>@actions/cache</code> to 6.2.0 by <a href="https://github.com/philip-gai"><code>@philip-gai</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1337">actions/setup-python#1337</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/lmvysakh"><code>@lmvysakh</code></a> made their first contribution in <a href="https://redirect.github.com/actions/setup-python/pull/1335">actions/setup-python#1335</a></li>
<li><a href="https://github.com/philip-gai"><code>@philip-gai</code></a> made their first contribution in <a href="https://redirect.github.com/actions/setup-python/pull/1337">actions/setup-python#1337</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/actions/setup-python/compare/v6...v7.0.0">https://github.com/actions/setup-python/compare/v6...v7.0.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/actions/setup-python/commit/5fda3b95a4ea91299a34e894583c3862153e4b97"><code>5fda3b9</code></a> Pin SHA commits and update docs with latest versions (<a href="https://redirect.github.com/actions/setup-python/issues/1338">#1338</a>)</li>
<li><a href="https://github.com/actions/setup-python/commit/4ab7e95f05e168b4356aebde89dd84f59c283d8e"><code>4ab7e95</code></a> Merge pull request <a href="https://redirect.github.com/actions/setup-python/issues/1337">#1337</a> from actions/philip-gai/bump-actions-cache-6-2-0</li>
<li><a href="https://github.com/actions/setup-python/commit/0f3a009f475dbea83c0371cd85d099690fee8c5c"><code>0f3a009</code></a> Remove the pip-install input (<a href="https://redirect.github.com/actions/setup-python/issues/1336">#1336</a>)</li>
<li><a href="https://github.com/actions/setup-python/commit/f8cf4291c8b8e273ddd26e569454615c7315d932"><code>f8cf429</code></a> Migrate to ESM and upgrade dependencies (<a href="https://redirect.github.com/actions/setup-python/issues/1330">#1330</a>)</li>
<li><a href="https://github.com/actions/setup-python/commit/54baeea5b34417d10a7479663a23cca53ea209b5"><code>54baeea</code></a> Validate and retry manifest fetch to prevent silent failures (<a href="https://redirect.github.com/actions/setup-python/issues/1332">#1332</a>)</li>
<li><a href="https://github.com/actions/setup-python/commit/c7092773a316760f4ecfe498e4af668a4dafeac5"><code>c709277</code></a> Annotation code fix (<a href="https://redirect.github.com/actions/setup-python/issues/1335">#1335</a>)</li>
<li><a href="https://github.com/actions/setup-python/commit/6849080452e69b330395e8a6d23cf90f56d76a1a"><code>6849080</code></a> remove EOL Python versions and Bumps numpy text fixture (<a href="https://redirect.github.com/actions/setup-python/issues/1333">#1333</a>)</li>
<li><a href="https://github.com/actions/setup-python/commit/0903b469fbf4441aadfe4f4b249dc5b1fba3a73e"><code>0903b46</code></a> Bump certifi from 2020.6.20 to 2024.7.4 in /<strong>tests</strong>/data (<a href="https://redirect.github.com/actions/setup-python/issues/1328">#1328</a>)</li>
<li>See full diff in <a href="https://github.com/actions/setup-python/compare/ece7cb06caefa5fff74198d8649806c4678c61a1...5fda3b95a4ea91299a34e894583c3862153e4b97">compare view</a></li>
</ul>
</details>
<br />
Updates `reviewdog/action-actionlint` from 1.72.0 to 1.73.0
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/reviewdog/action-actionlint/releases">reviewdog/action-actionlint's releases</a>.</em></p>
<blockquote>
<h2>Release v1.73.0</h2>
<h2>What's Changed</h2>
<ul>
<li>feat: add support for running this action without docker by <a href="https://github.com/IlyaGulya"><code>@IlyaGulya</code></a> in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/156">reviewdog/action-actionlint#156</a></li>
<li>Install pyflakes to composite action by <a href="https://github.com/shogo82148"><code>@shogo82148</code></a> in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/212">reviewdog/action-actionlint#212</a></li>
<li>Install shellcheck to dockerless by <a href="https://github.com/shogo82148"><code>@shogo82148</code></a> in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/213">reviewdog/action-actionlint#213</a></li>
<li>pin the version of pyflakes by <a href="https://github.com/shogo82148"><code>@shogo82148</code></a> in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/214">reviewdog/action-actionlint#214</a></li>
<li>feat: consolidate installation into a dedicated script by <a href="https://github.com/shogo82148"><code>@shogo82148</code></a> in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/215">reviewdog/action-actionlint#215</a></li>
<li>chore(deps): update reviewdog to 0.21.0 by <a href="https://github.com/github-actions"><code>@github-actions</code></a>[bot] in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/216">reviewdog/action-actionlint#216</a></li>
<li>chore(deps): update actionlint to 1.7.12 by <a href="https://github.com/github-actions"><code>@github-actions</code></a>[bot] in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/217">reviewdog/action-actionlint#217</a></li>
<li>fix: correct version_name typo in depup workflow for shellcheck by <a href="https://github.com/shogo82148"><code>@shogo82148</code></a> in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/218">reviewdog/action-actionlint#218</a></li>
<li>chore(deps): update shellcheck to 0.11.0 by <a href="https://github.com/github-actions"><code>@github-actions</code></a>[bot] in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/219">reviewdog/action-actionlint#219</a></li>
<li>GitHub native release note by <a href="https://github.com/shogo82148"><code>@shogo82148</code></a> in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/220">reviewdog/action-actionlint#220</a></li>
<li>chore: update download URLs for actionlint and reviewdog to specific commits by <a href="https://github.com/shogo82148"><code>@shogo82148</code></a> in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/221">reviewdog/action-actionlint#221</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/IlyaGulya"><code>@IlyaGulya</code></a> made their first contribution in <a href="https://redirect.github.com/reviewdog/action-actionlint/pull/156">reviewdog/action-actionlint#156</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/reviewdog/action-actionlint/compare/v1.72.1...v1.73.0">https://github.com/reviewdog/action-actionlint/compare/v1.72.1...v1.73.0</a></p>
<h2>Release v1.72.1</h2>
<p>v1.72.1: PR <a href="https://redirect.github.com/reviewdog/action-actionlint/issues/211">#211</a> - fix: include digest in Docker image reference for action.yml</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/reviewdog/action-actionlint/commit/50842263c20a7c46bd0065b9e624d3c569db061e"><code>5084226</code></a> bump v1.73.0</li>
<li><a href="https://github.com/reviewdog/action-actionlint/commit/70f2164c5922dc98a25d3a1c865e11db03ff1aeb"><code>70f2164</code></a> Merge branch 'main' into releases/v1</li>
<li><a href="https://github.com/reviewdog/action-actionlint/commit/a499b807aed4af40b8f2f7b885b9e38c469a945c"><code>a499b80</code></a> Merge pull request <a href="https://redirect.github.com/reviewdog/action-actionlint/issues/221">#221</a> from reviewdog/pin-install-script</li>
<li><a href="https://github.com/reviewdog/action-actionlint/commit/b9330b90ccb72273b2a50dec3d45667e5a835b3c"><code>b9330b9</code></a> chore: update download URLs for actionlint and reviewdog to specific commits</li>
<li><a href="https://github.com/reviewdog/action-actionlint/commit/e32ed5474aa46bda2bf7d69638552c72a8203cee"><code>e32ed54</code></a> Merge pull request <a href="https://redirect.github.com/reviewdog/action-actionlint/issues/220">#220</a> from reviewdog/github-native-release-note</li>
<li><a href="https://github.com/reviewdog/action-actionlint/commit/ae14c286ba0c506306f84b41a2fecdcd0bab8b32"><code>ae14c28</code></a> chore: enable generation of release notes in the release workflow</li>
<li><a href="https://github.com/reviewdog/action-actionlint/commit/992e9348c56e5da35ca5d00a468ae2d2e7ae1b9d"><code>992e934</code></a> chore: remove tag trigger from release workflow</li>
<li><a href="https://github.com/reviewdog/action-actionlint/commit/f9adc3afc1750064b3fcdd9a301f4371408f7472"><code>f9adc3a</code></a> Merge pull request <a href="https://redirect.github.com/reviewdog/action-actionlint/issues/219">#219</a> from reviewdog/depup/shellcheck</li>
<li><a href="https://github.com/reviewdog/action-actionlint/commit/82955410a240babb73811b5087edd3bca3437cf8"><code>8295541</code></a> chore(deps): update shellcheck to 0.11.0</li>
<li><a href="https://github.com/reviewdog/action-actionlint/commit/f96c3f1ecdecc12c278e12bded6228bdc3b5eca6"><code>f96c3f1</code></a> Merge pull request <a href="https://redirect.github.com/reviewdog/action-actionlint/issues/218">#218</a> from reviewdog/correct-version-name-typo</li>
<li>Additional commits viewable in <a href="https://github.com/reviewdog/action-actionlint/compare/6fb7acc99f4a1008869fa8a0f09cfca740837d9d...50842263c20a7c46bd0065b9e624d3c569db061e">compare view</a></li>
</ul>
</details>
<br />
Updates `GrantBirki/comment` from 3.0.0 to 3.0.3
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/grantbirki/comment/releases">GrantBirki/comment's releases</a>.</em></p>
<blockquote>
<h2>v3.0.3</h2>
<h2>What's Changed</h2>
<ul>
<li>Add release bundle attestations by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/48">GrantBirki/comment#48</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.3">https://github.com/GrantBirki/comment/compare/v3...v3.0.3</a></p>
<h2>v3.0.2</h2>
<h2>What's Changed</h2>
<ul>
<li>Bump version to v3.0.2 by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/47">GrantBirki/comment#47</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.2">https://github.com/GrantBirki/comment/compare/v3...v3.0.2</a></p>
<h2>v3.0.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Add dependency cooldowns by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/37">GrantBirki/comment#37</a></li>
<li>Bump actions/upload-artifact from 6.0.0 to 7.0.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/38">GrantBirki/comment#38</a></li>
<li>Bump actions/upload-artifact from 7.0.0 to 7.0.1 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/39">GrantBirki/comment#39</a></li>
<li>Bump esbuild from 0.27.7 to 0.28.1 in the npm_and_yarn group across 1 directory by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/40">GrantBirki/comment#40</a></li>
<li>Fix template variable documentation by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/41">GrantBirki/comment#41</a></li>
<li>Reduce npm dependency surface by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/45">GrantBirki/comment#45</a></li>
<li>Add versioned release automation by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/46">GrantBirki/comment#46</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.1">https://github.com/GrantBirki/comment/compare/v3...v3.0.1</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/GrantBirki/comment/commit/937820f3623fd0e300294bcc64ac7577fc0ad4cc"><code>937820f</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/48">#48</a> from GrantBirki/add-release-attestations</li>
<li><a href="https://github.com/GrantBirki/comment/commit/56617234d3c8c5bcb92b2ac851cc4925e3034254"><code>5661723</code></a> Bump version to v3.0.3</li>
<li><a href="https://github.com/GrantBirki/comment/commit/245ea8def6a8b8cd42098a154250be7098f4c97f"><code>245ea8d</code></a> Add release bundle attestations</li>
<li><a href="https://github.com/GrantBirki/comment/commit/93a7ff5a297b609ea35b67866cc3459676d2aba1"><code>93a7ff5</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/47">#47</a> from GrantBirki/bump-v3.0.2</li>
<li><a href="https://github.com/GrantBirki/comment/commit/44e0f6fce3957b6ba32ea1b28c2885c288723f4b"><code>44e0f6f</code></a> Bump version to v3.0.2</li>
<li><a href="https://github.com/GrantBirki/comment/commit/b23dd77391cf0a2538e898a73169eac9c1a6a6ff"><code>b23dd77</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/46">#46</a> from GrantBirki/versioned-auto-release</li>
<li><a href="https://github.com/GrantBirki/comment/commit/53e38fc3816c5a0ab34974efe7e26772fa504e39"><code>53e38fc</code></a> Make release workflow reruns resumable</li>
<li><a href="https://github.com/GrantBirki/comment/commit/b95b12a9f0e8d416e4dee45b1247c2ffa0d80f6b"><code>b95b12a</code></a> Disable persisted checkout credentials</li>
<li><a href="https://github.com/GrantBirki/comment/commit/a56acd4048fa2bfef519dbbc7b9f91cfceca3818"><code>a56acd4</code></a> Remove release workflow npm cache</li>
<li><a href="https://github.com/GrantBirki/comment/commit/f802ba8fc0cb98597304197afcbb85edd6d438a7"><code>f802ba8</code></a> Rename action version export</li>
<li>Additional commits viewable in <a href="https://github.com/grantbirki/comment/compare/3439715f0cf3b8fc29bf47be0e3226679c06c41a...937820f3623fd0e300294bcc64ac7577fc0ad4cc">compare view</a></li>
</ul>
</details>
<br />
Updates `marocchino/sticky-pull-request-comment` from 3.0.4 to 3.0.5
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/marocchino/sticky-pull-request-comment/releases">marocchino/sticky-pull-request-comment's releases</a>.</em></p>
<blockquote>
<h2>v3.0.5</h2>
<h2>What's Changed</h2>
<ul>
<li>build(deps-dev): Bump rollup from 4.60.1 to 4.60.2 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1687">marocchino/sticky-pull-request-comment#1687</a></li>
<li>build(deps-dev): Bump typescript from 6.0.2 to 6.0.3 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1686">marocchino/sticky-pull-request-comment#1686</a></li>
<li>build(deps-dev): Bump <code>@biomejs/biome</code> from 2.4.11 to 2.4.12 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1685">marocchino/sticky-pull-request-comment#1685</a></li>
<li>build(deps-dev): Bump vitest from 4.1.4 to 4.1.5 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1688">marocchino/sticky-pull-request-comment#1688</a></li>
<li>build(deps): Bump <code>@actions/glob</code> from 0.6.1 to 0.7.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1689">marocchino/sticky-pull-request-comment#1689</a></li>
<li>build(deps): Bump <code>@actions/core</code> from 3.0.0 to 3.0.1 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1690">marocchino/sticky-pull-request-comment#1690</a></li>
<li>build(deps): Bump <code>@actions/github</code> from 9.1.0 to 9.1.1 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1691">marocchino/sticky-pull-request-comment#1691</a></li>
<li>build(deps-dev): Bump <code>@biomejs/biome</code> from 2.4.12 to 2.4.13 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1693">marocchino/sticky-pull-request-comment#1693</a></li>
<li>feat: embed file content in message template via <code>{{{content}}}</code> placeholder by <a href="https://github.com/marocchino"><code>@marocchino</code></a> with <a href="https://github.com/Copilot"><code>@Copilot</code></a> in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1665">marocchino/sticky-pull-request-comment#1665</a></li>
<li>build(deps-dev): Bump <code>@biomejs/biome</code> from 2.4.13 to 2.4.14 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1694">marocchino/sticky-pull-request-comment#1694</a></li>
<li>build(deps-dev): Bump rollup from 4.60.2 to 4.60.3 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1695">marocchino/sticky-pull-request-comment#1695</a></li>
<li>build(deps-dev): Bump <code>@types/node</code> from 25.6.0 to 25.6.2 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1698">marocchino/sticky-pull-request-comment#1698</a></li>
<li>build(deps-dev): Bump <code>@types/node</code> from 25.6.2 to 25.7.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1700">marocchino/sticky-pull-request-comment#1700</a></li>
<li>build(deps-dev): Bump vitest from 4.1.5 to 4.1.6 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1701">marocchino/sticky-pull-request-comment#1701</a></li>
<li>build(deps-dev): Bump <code>@types/node</code> from 25.7.0 to 25.8.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1703">marocchino/sticky-pull-request-comment#1703</a></li>
<li>build(deps-dev): Bump rollup from 4.60.3 to 4.60.4 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1704">marocchino/sticky-pull-request-comment#1704</a></li>
<li>build(deps-dev): Bump <code>@types/node</code> from 25.8.0 to 25.9.1 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1707">marocchino/sticky-pull-request-comment#1707</a></li>
<li>build(deps-dev): Bump vitest from 4.1.6 to 4.1.7 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1708">marocchino/sticky-pull-request-comment#1708</a></li>
<li>build(deps): Bump brace-expansion from 5.0.5 to 5.0.6 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1705">marocchino/sticky-pull-request-comment#1705</a></li>
<li>build(deps): Bump undici from 6.24.0 to 6.27.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1725">marocchino/sticky-pull-request-comment#1725</a></li>
<li>build(deps-dev): Bump rollup from 4.60.4 to 4.62.2 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1722">marocchino/sticky-pull-request-comment#1722</a></li>
<li>build(deps): Bump actions/checkout from 6 to 7 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1721">marocchino/sticky-pull-request-comment#1721</a></li>
<li>build(deps-dev): Bump vite from 8.0.13 to 8.0.16 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1720">marocchino/sticky-pull-request-comment#1720</a></li>
<li>build(deps-dev): Bump vitest from 4.1.7 to 4.1.9 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1719">marocchino/sticky-pull-request-comment#1719</a></li>
<li>build(deps-dev): Bump <code>@types/node</code> from 25.9.1 to 26.1.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1731">marocchino/sticky-pull-request-comment#1731</a></li>
<li>build(deps-dev): Bump <code>@rollup/plugin-commonjs</code> from 29.0.2 to 29.0.3 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1710">marocchino/sticky-pull-request-comment#1710</a></li>
<li>build(deps-dev): Bump js-yaml from 4.1.1 to 5.2.1 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1732">marocchino/sticky-pull-request-comment#1732</a></li>
<li>build(deps-dev): Bump <code>@biomejs/biome</code> from 2.4.14 to 2.5.2 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/pull/1730">marocchino/sticky-pull-request-comment#1730</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/marocchino/sticky-pull-request-comment/compare/v3.0.4...v3.0.5">https://github.com/marocchino/sticky-pull-request-comment/compare/v3.0.4...v3.0.5</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/marocchino/sticky-pull-request-comment/commit/5770ad5eb8f42dd2c4f34da00c94c5381e49af88"><code>5770ad5</code></a> 📦️ Build</li>
<li><a href="https://github.com/marocchino/sticky-pull-request-comment/commit/2c190609760f3bf7b8298e5e88612e77a6d49ecc"><code>2c19060</code></a> build(deps-dev): Bump <code>@biomejs/biome</code> from 2.4.14 to 2.5.2 (<a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/issues/1730">#1730</a>)</li>
<li><a href="https://github.com/marocchino/sticky-pull-request-comment/commit/3d24e5ae13e5cb81ea2bc10645b7d737cf11902f"><code>3d24e5a</code></a> build(deps-dev): Bump js-yaml from 4.1.1 to 5.2.1 (<a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/issues/1732">#1732</a>)</li>
<li><a href="https://github.com/marocchino/sticky-pull-request-comment/commit/36048210fda2e47994091215455a64526baf9829"><code>3604821</code></a> build(deps-dev): Bump <code>@rollup/plugin-commonjs</code> from 29.0.2 to 29.0.3 (<a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/issues/1710">#1710</a>)</li>
<li><a href="https://github.com/marocchino/sticky-pull-request-comment/commit/a4d9c0f61c8b826000881e93dcf8d3c3de9e6d82"><code>a4d9c0f</code></a> build(deps-dev): Bump <code>@types/node</code> from 25.9.1 to 26.1.0 (<a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/issues/1731">#1731</a>)</li>
<li><a href="https://github.com/marocchino/sticky-pull-request-comment/commit/ae65a58300ab21f85000f649966645a4f8b98c7e"><code>ae65a58</code></a> build(deps-dev): Bump vitest from 4.1.7 to 4.1.9 (<a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/issues/1719">#1719</a>)</li>
<li><a href="https://github.com/marocchino/sticky-pull-request-comment/commit/86803217fddacb4de85c3e9724a5562badaa8c8e"><code>8680321</code></a> build(deps-dev): Bump vite from 8.0.13 to 8.0.16 (<a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/issues/1720">#1720</a>)</li>
<li><a href="https://github.com/marocchino/sticky-pull-request-comment/commit/5d402391401fd084c1a074525b8c1f306989428f"><code>5d40239</code></a> build(deps): Bump actions/checkout from 6 to 7 (<a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/issues/1721">#1721</a>)</li>
<li><a href="https://github.com/marocchino/sticky-pull-request-comment/commit/39ab01d7848066124dd3483f4186a8ec4b5f8f3d"><code>39ab01d</code></a> build(deps-dev): Bump rollup from 4.60.4 to 4.62.2 (<a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/issues/1722">#1722</a>)</li>
<li><a href="https://github.com/marocchino/sticky-pull-request-comment/commit/b2660f1f0ba080a208cdb3834816c6012377e8b6"><code>b2660f1</code></a> build(deps): Bump undici from 6.24.0 to 6.27.0 (<a href="https://redirect.github.com/marocchino/sticky-pull-request-comment/issues/1725">#1725</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/marocchino/sticky-pull-request-comment/compare/0ea0beb66eb9baf113663a64ec522f60e49231c0...5770ad5eb8f42dd2c4f34da00c94c5381e49af88">compare view</a></li>
</ul>
</details>
<br />
Updates `zulip/github-actions-zulip/send-message` from 2.0.1 to 2.0.2
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/zulip/github-actions-zulip/releases">zulip/github-actions-zulip/send-message's releases</a>.</em></p>
<blockquote>
<h2>v2.0.2</h2>
<h2>What's Changed</h2>
<ul>
<li>Upgrade dependencies by <a href="https://github.com/andersk"><code>@andersk</code></a> in <a href="https://redirect.github.com/zulip/github-actions-zulip/pull/153">zulip/github-actions-zulip#153</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/zulip/github-actions-zulip/compare/v2.0.1...v2.0.2">https://github.com/zulip/github-actions-zulip/compare/v2.0.1...v2.0.2</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/zulip/github-actions-zulip/blob/main/CHANGELOG.md">zulip/github-actions-zulip/send-message's changelog</a>.</em></p>
<blockquote>
<h1>Zulip GitHub Action Changelog</h1>
<h2>2.0.2 (2026-06-16)</h2>
<p><strong>Infrastructure</strong></p>
<ul>
<li>Upgrade dependencies.</li>
</ul>
<h2>2.0.1 (2026-05-21)</h2>
<p><strong>Fixes</strong></p>
<ul>
<li>Add missing tslib dependency.</li>
</ul>
<h2>2.0.0 (2026-05-20)</h2>
<p><strong>Breaking changes</strong></p>
<ul>
<li>Switch from deprecated Node 20 to Node 24.</li>
</ul>
<p><strong>Infrastructure</strong></p>
<ul>
<li>Upgrade dependencies.</li>
</ul>
<h2>1.0.0 (2021-08-14)</h2>
<p><strong>Breaking changes</strong></p>
<p>⚠️ Please use <code>zulip/github-actions-zulip/send-message@v1</code> instead of <code>yuzutech/zulip-send-message-action@v0.1.2</code>.<br />
If you were using <code>password</code> as authentification method, please get an API key through Zulip's web interface and use <code>api-key</code> instead.
Finally, <code>username</code> field was renamed to <code>email</code> to be consistent with Zulip API naming.</p>
<p><em>Before</em></p>
<pre lang="yml"><code>- name: Send a stream message
uses: yuzutech/zulip-send-message-action@v0.1.0
with:
username: "username@example.com"
api-key: "abcd1234"
organization-url: "https://org.zulipchat.com"
to: "social"
type: "stream"
topic: "Castle"
content: "I come not, friends, to steal away your hearts."
</code></pre>
<p><em>After</em></p>
<pre lang="yml"><code></tr></table>
</code></pre>
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/zulip/github-actions-zulip/commit/f675f2b4eb2a95fae974215476dcb7ad8dfeff6b"><code>f675f2b</code></a> Release v2.0.2.</li>
<li><a href="https://github.com/zulip/github-actions-zulip/commit/2126b4e7204e82380377173715b9d0e28a1e0ea9"><code>2126b4e</code></a> Upgrade dependencies.</li>
<li><a href="https://github.com/zulip/github-actions-zulip/commit/03c1bf9bf768078ee07156917294308e82e10df0"><code>03c1bf9</code></a> eslint: Run prettier separately.</li>
<li><a href="https://github.com/zulip/github-actions-zulip/commit/bf35ec515a8c2269ff64bca5d3e454092015795f"><code>bf35ec5</code></a> eslint: Fix arrow-body-style.</li>
<li><a href="https://github.com/zulip/github-actions-zulip/commit/f624d603510fbc938e91ee40ae12d030dd8442f6"><code>f624d60</code></a> eslint: Fix <code>@typescript-eslint/strict-boolean-expressions</code>.</li>
<li>See full diff in <a href="https://github.com/zulip/github-actions-zulip/compare/v2.0.1...f675f2b4eb2a95fae974215476dcb7ad8dfeff6b">compare view</a></li>
</ul>
</details>
<br />
Updates `docker/login-action` from 4.2.0 to 4.6.0
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/docker/login-action/releases">docker/login-action's releases</a>.</em></p>
<blockquote>
<h2>v4.6.0</h2>
<ul>
<li>Harden buildx scoped config path handling by <a href="https://github.com/crazy-max"><code>@crazy-max</code></a> in <a href="https://redirect.github.com/docker/login-action/pull/1059">docker/login-action#1059</a></li>
<li>Bump <code>@aws-sdk/client-ecr</code> and <code>@aws-sdk/client-ecr-public</code> to 3.1095.0 in <a href="https://redirect.github.com/docker/login-action/pull/1051">docker/login-action#1051</a></li>
<li>Bump js-yaml from 5.2.1 to 5.2.2 in <a href="https://redirect.github.com/docker/login-action/pull/1057">docker/login-action#1057</a></li>
<li>Bump postcss from 8.5.10 to 8.5.22 in <a href="https://redirect.github.com/docker/login-action/pull/1056">docker/login-action#1056</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/docker/login-action/compare/v4.5.2...v4.6.0">https://github.com/docker/login-action/compare/v4.5.2...v4.6.0</a></p>
<h2>v4.5.2</h2>
<ul>
<li>Surface Docker Hub OIDC error responses by <a href="https://github.com/crazy-max"><code>@crazy-max</code></a> in <a href="https://redirect.github.com/docker/login-action/pull/1058">docker/login-action#1058</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/docker/login-action/compare/v4.5.1...v4.5.2">https://github.com/docker/login-action/compare/v4.5.1...v4.5.2</a></p>
<h2>v4.5.1</h2>
<ul>
<li>Support <code>dhi.io</code> as Docker Hub OIDC registry by <a href="https://github.com/crazy-max"><code>@crazy-max</code></a> in <a href="https://redirect.github.com/docker/login-action/pull/1054">docker/login-action#1054</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/docker/login-action/compare/v4.5.0...v4.5.1">https://github.com/docker/login-action/compare/v4.5.0...v4.5.1</a></p>
<h2>v4.5.0</h2>
<ul>
<li><a href="https://github.com/docker/login-action#docker-hub">Docker Hub OIDC</a> login support by <a href="https://github.com/crazy-max"><code>@crazy-max</code></a> in <a href="https://redirect.github.com/docker/login-action/pull/1048">docker/login-action#1048</a></li>
<li>Bump <code>@aws-sdk/client-ecr</code> and <code>@aws-sdk/client-ecr-public</code> to 3.1091.0 in <a href="https://redirect.github.com/docker/login-action/pull/1037">docker/login-action#1037</a></li>
<li>Bump <code>@docker/actions-toolkit</code> from 0.92.0 to 0.94.0 in <a href="https://redirect.github.com/docker/login-action/pull/1044">docker/login-action#1044</a> <a href="https://redirect.github.com/docker/login-action/pull/1050">docker/login-action#1050</a></li>
<li>Bump brace-expansion from 1.1.13 to 1.1.16 in <a href="https://redirect.github.com/docker/login-action/pull/1046">docker/login-action#1046</a></li>
<li>Bump js-yaml from 5.2.0 to 5.2.1 in <a href="https://redirect.github.com/docker/login-action/pull/1038">docker/login-action#1038</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/docker/login-action/compare/v4.4.0...v4.5.0">https://github.com/docker/login-action/compare/v4.4.0...v4.5.0</a></p>
<h2>v4.4.0</h2>
<ul>
<li>Skip empty <code>registry-auth</code> secret mask by <a href="https://github.com/crazy-max"><code>@crazy-max</code></a> in <a href="https://redirect.github.com/docker/login-action/pull/1035">docker/login-action#1035</a></li>
<li>Bump <code>@aws-sdk/client-ecr</code> and <code>@aws-sdk/client-ecr-public</code> to 3.1077.0 <a href="https://redirect.github.com/docker/login-action/pull/1034">docker/login-action#1034</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/docker/login-action/compare/v4.3.0...v4.4.0">https://github.com/docker/login-action/compare/v4.3.0...v4.4.0</a></p>
<h2>v4.3.0</h2>
<ul>
<li>Preserve names in esbuild bundle by <a href="https://github.com/crazy-max"><code>@crazy-max</code></a> in <a href="https://redirect.github.com/docker/login-action/pull/1022">docker/login-action#1022</a></li>
<li>Bump <code>@aws-sdk/client-ecr</code> and <code>@aws-sdk/client-ecr-public</code> to 3.1076.0 <a href="https://redirect.github.com/docker/login-action/pull/999">docker/login-action#999</a> <a href="https://redirect.github.com/docker/login-action/pull/1030">docker/login-action#1030</a></li>
<li>Bump <code>@docker/actions-toolkit</code> from 0.90.0 to 0.92.0 in <a href="https://redirect.github.com/docker/login-action/pull/1004">docker/login-action#1004</a> <a href="https://redirect.github.com/docker/login-action/pull/1027">docker/login-action#1027</a></li>
<li>Bump <code>@sigstore/core</code> from 3.1.0 to 3.2.1 in <a href="https://redirect.github.com/docker/login-action/pull/1023">docker/login-action#1023</a></li>
<li>Bump <code>@sigstore/verify</code> from 3.1.0 to 3.1.1 in <a href="https://redirect.github.com/docker/login-action/pull/1029">docker/login-action#1029</a></li>
<li>Bump http-proxy-agent and https-proxy-agent to 9.1.0 in <a href="https://redirect.github.com/docker/login-action/pull/1017">docker/login-action#1017</a></li>
<li>Bump js-yaml from 4.1.1 to 5.2.0 in <a href="https://redirect.github.com/docker/login-action/pull/1028">docker/login-action#1028</a></li>
<li>Bump sigstore from 4.1.0 to 4.1.1 in <a href="https://redirect.github.com/docker/login-action/pull/1031">docker/login-action#1031</a></li>
<li>Bump tmp from 0.2.5 to 0.2.7 in <a href="https://redirect.github.com/docker/login-action/pull/1002">docker/login-action#1002</a></li>
<li>Bump undici from 6.24.1 to 6.27.0 in <a href="https://redirect.github.com/docker/login-action/pull/1020">docker/login-action#1020</a></li>
<li>Bump vite from 7.3.3 to 7.3.6 in <a href="https://redirect.github.com/docker/login-action/pull/1019">docker/login-action#1019</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/docker/login-action/compare/v4.2.0...v4.3.0">https://github.com/docker/login-action/compare/v4.2.0...v4.3.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/docker/login-action/commit/dbcb813823bdd20940b903addbd779551569679f"><code>dbcb813</code></a> Merge pull request <a href="https://redirect.github.com/docker/login-action/issues/1051">#1051</a> from docker/dependabot/npm_and_yarn/aws-sdk-dependen...</li>
<li><a href="https://github.com/docker/login-action/commit/5bcb015ee6ec720ecdeaef2dc1164122e9b209fc"><code>5bcb015</code></a> [dependabot skip] chore: update generated content</li>
<li><a href="https://github.com/docker/login-action/commit/b30b2f2d3196c1714318ba0c3c3bec211d949752"><code>b30b2f2</code></a> build(deps): bump the aws-sdk-dependencies group across 1 directory with 2 up...</li>
<li><a href="https://github.com/docker/login-action/commit/9087f1e6d666fe0292409e3c819680c18526e108"><code>9087f1e</code></a> Merge pull request <a href="https://redirect.github.com/docker/login-action/issues/1057">#1057</a> from docker/dependabot/npm_and_yarn/js-yaml-5.2.2</li>
<li><a href="https://github.com/docker/login-action/commit/0009830ea169ca16c24c0ea4cac1c325bfa3aee4"><code>0009830</code></a> [dependabot skip] chore: update generated content</li>
<li><a href="https://github.com/docker/login-action/commit/23255232d3e43c8f0052d9a0dba82a515a88ce92"><code>2325523</code></a> build(deps): bump js-yaml from 5.2.1 to 5.2.2</li>
<li><a href="https://github.com/docker/login-action/commit/4ec1d4a769e8b05a89a7396551dc38b329211688"><code>4ec1d4a</code></a> Merge pull request <a href="https://redirect.github.com/docker/login-action/issues/1056">#1056</a> from docker/dependabot/npm_and_yarn/postcss-8.5.22</li>
<li><a href="https://github.com/docker/login-action/commit/5fc99ba47bca274c5a499688f71c7ea79c0ea1b3"><code>5fc99ba</code></a> Merge pull request <a href="https://redirect.github.com/docker/login-action/issues/1053">#1053</a> from docker/dependabot/github_actions/aws-actions/co...</li>
<li><a href="https://github.com/docker/login-action/commit/e512bd59d16c53d79ea5c0f0e345fe554453c4bb"><code>e512bd5</code></a> Merge pull request <a href="https://redirect.github.com/docker/login-action/issues/1052">#1052</a> from docker/dependabot/github_actions/codeql-actions...</li>
<li><a href="https://github.com/docker/login-action/commit/a146c91b8f371700d323bae808af7cbdc2766ed5"><code>a146c91</code></a> Merge pull request <a href="https://redirect.github.com/docker/login-action/issues/1059">#1059</a> from crazy-max/harden-buildx-scope-paths</li>
<li>Additional commits viewable in <a href="https://github.com/docker/login-action/compare/650006c6eb7dba73a995cc03b0b2d7f5ca915bee...dbcb813823bdd20940b903addbd779551569679f">compare view</a></li>
</ul>
</details>
<br />
Updates `docker/metadata-action` from 6.1.0 to 6.2.0
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/docker/metadata-action/releases">docker/metadata-action's releases</a>.</em></p>
<blockquote>
<h2>v6.2.0</h2>
<ul>
<li>Preserve names in esbuild bundle by <a href="https://github.com/crazy-max"><code>@crazy-max</code></a> in <a href="https://redirect.github.com/docker/metadata-action/pull/689">docker/metadata-action#689</a></li>
<li>Bump <code>@actions/core</code> from 3.0.0 to 3.0.1 in <a href="https://redirect.github.com/docker/metadata-action/pull/663">docker/metadata-action#663</a></li>
<li>Bump <code>@actions/github</code> from 9.0.0 to 9.1.1 in <a href="https://redirect.github.com/docker/metadata-action/pull/666">docker/metadata-action#666</a></li>
<li>Bump <code>@docker/actions-toolkit</code> from 0.90.0 to 0.92.0 in <a href="https://redirect.github.com/docker/metadata-action/pull/672">docker/metadata-action#672</a> <a href="https://redirect.github.com/docker/metadata-action/pull/696">docker/metadata-action#696</a></li>
<li>Bump <code>@sigstore/core</code> from 3.1.0 to 3.2.1 in <a href="https://redirect.github.com/docker/metadata-action/pull/690">docker/metadata-action#690</a></li>
<li>Bump <code>@sigstore/verify</code> from 3.1.0 to 3.1.1 in <a href="https://redirect.github.com/docker/metadata-action/pull/693">docker/metadata-action#693</a></li>
<li>Bump csv-parse from 6.2.1 to 7.0.0 in <a href="https://redirect.github.com/docker/metadata-action/pull/683">docker/metadata-action#683</a></li>
<li>Bump js-yaml from 4.1.1 to 4.3.0 in <a href="https://redirect.github.com/docker/metadata-action/pull/688">docker/metadata-action#688</a></li>
<li>Bump moment-timezone from 0.6.1 to 0.6.2 in <a href="https://redirect.github.com/docker/metadata-action/pull/664">docker/metadata-action#664</a></li>
<li>Bump semver from 7.7.4 to 7.8.5 in <a href="https://redirect.github.com/docker/metadata-action/pull/665">docker/metadata-action#665</a> <a href="https://redirect.github.com/docker/metadata-action/pull/695">docker/metadata-action#695</a></li>
<li>Bump sigstore from 4.1.0 to 4.1.1 in <a href="https://redirect.github.com/docker/metadata-action/pull/694">docker/metadata-action#694</a></li>
<li>Bump tmp from 0.2.5 to 0.2.7 in <a href="https://redirect.github.com/docker/metadata-action/pull/673">docker/metadata-action#673</a></li>
<li>Bump undici from 6.25.0 to 6.27.0 in <a href="https://redirect.github.com/docker/metadata-action/pull/686">docker/metadata-action#686</a></li>
<li>Bump vite from 7.3.2 to 7.3.6 in <a href="https://redirect.github.com/docker/metadata-action/pull/685">docker/metadata-action#685</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/docker/metadata-action/compare/v6.1.0...v6.2.0">https://github.com/docker/metadata-action/compare/v6.1.0...v6.2.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/docker/metadata-action/commit/dc802804100637a589fabce1cb79ff13a1411302"><code>dc80280</code></a> Merge pull request <a href="https://redirect.github.com/docker/metadata-action/issues/696">#696</a> from docker/dependabot/npm_and_yarn/docker/actions-to...</li>
<li><a href="https://github.com/docker/metadata-action/commit/2b9fe830efc58cb7b0fab7c94300b1afa01864db"><code>2b9fe83</code></a> [dependabot skip] chore: update generated content</li>
<li><a href="https://github.com/docker/metadata-action/commit/8128ce30ab370fd360c8423698dcc077f2db8087"><code>8128ce3</code></a> chore(deps): Bump <code>@docker/actions-toolkit</code> from 0.91.0 to 0.92.0</li>
<li><a href="https://github.com/docker/metadata-action/commit/1d1c89551edb081628e818368680beffb2bbccee"><code>1d1c895</code></a> Merge pull request <a href="https://redirect.github.com/docker/metadata-action/issues/695">#695</a> from docker/dependabot/npm_and_yarn/semver-7.8.5</li>
<li><a href="https://github.com/docker/metadata-action/commit/7f0c2dd4c83ea6258f78bf2fc6a02908417518ad"><code>7f0c2dd</code></a> Merge pull request <a href="https://redirect.github.com/docker/metadata-action/issues/694">#694</a> from docker/dependabot/npm_and_yarn/sigstore-4.1.1</li>
<li><a href="https://github.com/docker/metadata-action/commit/025f8c5c8167edab853571a387d8e80ccc1e91ed"><code>025f8c5</code></a> [dependabot skip] chore: update generated content</li>
<li><a href="https://github.com/docker/metadata-action/commit/e98d63c3081990566e174100a3afaa97aefbbcf3"><code>e98d63c</code></a> chore(deps): Bump semver from 7.8.1 to 7.8.5</li>
<li><a href="https://github.com/docker/metadata-action/commit/37d93799507b94cf1c1885efd7278d52a0fb806a"><code>37d9379</code></a> chore(deps): Bump sigstore from 4.1.0 to 4.1.1</li>
<li><a href="https://github.com/docker/metadata-action/commit/a1b80728476a956a25c5eeaff91c4dc46e7ac1bc"><code>a1b8072</code></a> Merge pull request <a href="https://redirect.github.com/docker/metadata-action/issues/690">#690</a> from docker/dependabot/npm_and_yarn/sigstore/core-3.2.1</li>
<li><a href="https://github.com/docker/metadata-action/commit/e0e338106d6ae0da5b44537049a34620b3559a5c"><code>e0e3381</code></a> [dependabot skip] chore: update generated content</li>
<li>Additional commits viewable in <a href="https://github.com/docker/metadata-action/compare/80c7e94dd9b9319bd5eb7a0e0fe9291e23a2a2e9...dc802804100637a589fabce1cb79ff13a1411302">compare view</a></li>
</ul>
</details>
<br />
Updates `docker/build-push-action` from 7.2.0 to 7.3.0
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/docker/build-push-action/releases">docker/build-push-action's releases</a>.</em></p>
<blockquote>
<h2>v7.3.0</h2>
<ul>
<li>Preserve names in esbuild bundle by <a href="https://github.com/crazy-max"><code>@crazy-max</code></a> in <a href="https://redirect.github.com/docker/build-push-action/pull/1567">docker/build-push-action#1567</a></li>
<li>Bump <code>@docker/actions-toolkit</code> from 0.90.0 to 0.92.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1545">docker/build-push-action#1545</a> <a href="https://redirect.github.com/docker/build-push-action/pull/1572">docker/build-push-action#1572</a></li>
<li>Bump <code>@sigstore/core</code> from 3.1.0 to 3.2.1 in <a href="https://redirect.github.com/docker/build-push-action/pull/1568">docker/build-push-action#1568</a></li>
<li>Bump js-yaml from 4.1.1 to 4.3.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1566">docker/build-push-action#1566</a></li>
<li>Bump tmp from 0.2.5 to 0.2.7 in <a href="https://redirect.github.com/docker/build-push-action/pull/1547">docker/build-push-action#1547</a></li>
<li>Bump undici from 6.24.1 to 6.27.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1564">docker/build-push-action#1564</a></li>
<li>Bump vite from 7.3.2 to 7.3.6 in <a href="https://redirect.github.com/docker/build-push-action/pull/1563">docker/build-push-action#1563</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v7.2.0...v7.3.0">https://github.com/docker/build-push-action/compare/v7.2.0...v7.3.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/docker/build-push-action/commit/53b7df96c91f9c12dcc8a07bcb9ccacbed38856a"><code>53b7df9</code></a> Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1572">#1572</a> from docker/dependabot/npm_and_yarn/docker/actions-t...</li>
<li><a href="https://github.com/docker/build-push-action/commit/154298c1ca89be1c0e019084f0611ddca621aafc"><code>154298c</code></a> [dependabot skip] chore: update generated content</li>
<li><a href="https://github.com/docker/build-push-action/commit/cb1238b9c9eb453d106b4e4142a5bd9cde710040"><code>cb1238b</code></a> chore(deps): Bump <code>@docker/actions-toolkit</code> from 0.91.0 to 0.92.0</li>
<li><a href="https://github.com/docker/build-push-action/commit/24f845d5cbe75d2d350a984fd0e18cb7a3f29c1c"><code>24f845d</code></a> Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1566">#1566</a> from docker/dependabot/npm_and_yarn/js-yaml-4.2.0</li>
<li><a href="https://github.com/docker/build-push-action/commit/9c6973007b52c322651c38915d5e8824cea95c50"><code>9c69730</code></a> [dependabot skip] chore: update generated content</li>
<li><a href="https://github.com/docker/build-push-action/commit/bc3a3a5f72a6dca16c2c2468d1dfc55ee66d2193"><code>bc3a3a5</code></a> Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1574">#1574</a> from docker/dependabot/github_actions/aws-actions/co...</li>
<li><a href="https://github.com/docker/build-push-action/commit/a82c504a2387bb8bedc50072f9c554ae2a7dab5d"><code>a82c504</code></a> chore(deps): Bump js-yaml from 4.1.1 to 4.3.0</li>
<li><a href="https://github.com/docker/build-push-action/commit/0285a75190c039d6dac52b7711abcef3f5d8f6f6"><code>0285a75</code></a> Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1573">#1573</a> from docker/dependabot/github_actions/actions/cache-...</li>
<li><a href="https://github.com/docker/build-push-action/commit/c6ad2a3f9644680619de938b97c8a10a87b2a88d"><code>c6ad2a3</code></a> Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1575">#1575</a> from docker/dependabot/github_actions/actions/checko...</li>
<li><a href="https://github.com/docker/build-push-action/commit/d37484fb9737c5442a257e2f0ae5a8d756ed7d92"><code>d37484f</code></a> Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1564">#1564</a> from docker/dependabot/npm_and_yarn/undici-6.27.0</li>
<li>Additional commits viewable in <a href="https://github.com/docker/build-push-action/compare/f9f3042f7e2789586610d6e8b85c8f03e5195baf...53b7df96c91f9c12dcc8a07bcb9ccacbed38856a">compare view</a></li>
</ul>
</details>
<br />
Updates `corentinmusard/otel-cicd-action` from 4.0.1 to 4.1.0
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/corentinmusard/otel-cicd-action/releases">corentinmusard/otel-cicd-action's releases</a>.</em></p>
<blockquote>
<h2>v4.1.0</h2>
<h3>Added</h3>
<ul>
<li>Added the <code>otlpInsecureSkipVerify</code> input for exp...
_Description has been truncated_ |
dependencies
github_actions
CI
|
97/97 |
.github/workflows/PR_summary.yml,.github/workflows/actionlint.yml,.github/workflows/add_label_from_diff.yaml,.github/workflows/build_template.yml,.github/workflows/cache_test.yml,.github/workflows/check_pr_titles.yaml,.github/workflows/commit_verification.yml,.github/workflows/daily-master-tag.yml,.github/workflows/daily.yml,.github/workflows/decls-diff.yml,.github/workflows/docker_build.yml,.github/workflows/export_crossrefs.yml,.github/workflows/export_telemetry.yaml,.github/workflows/label_new_contributor.yml,.github/workflows/lake_cache_shadow.yml,.github/workflows/latest_import.yml,.github/workflows/long_file_report.yml,.github/workflows/maintainer_bors_wf_run.yml,.github/workflows/maintainer_merge_wf_run.yml,.github/workflows/nightly_bump_and_merge.yml,.github/workflows/nightly_detect_failure.yml,.github/workflows/nightly_merge_master.yml,.github/workflows/nolints.yml,.github/workflows/olean_report.yaml,.github/workflows/pr_check_downstream.yml,.github/workflows/pre-commit.yml,.github/workflows/publish_tools.yml,.github/workflows/release.yml,.github/workflows/release_cache.yml,.github/workflows/remove_deprecated_decls.yml,.github/workflows/rm_set_option.yml,.github/workflows/shake.yaml,.github/workflows/technical_debt_metrics.yml,.github/workflows/update_dependencies.yml,.github/workflows/update_dependencies_zulip.yml,.github/workflows/validate_mathlib_ci_paths.yml,.github/workflows/weekly-lints.yml,.github/workflows/zulip_emoji_ci_status.yaml,.github/workflows/zulip_emoji_closed_pr.yaml,.github/workflows/zulip_emoji_labelling.yaml,.github/workflows/zulip_emoji_merge_delegate.yaml,.github/workflows/zulip_emoji_reconcile.yml |
42 |
1 |
['github-actions'] |
nobody |
6-19739 6 days ago |
6-20288 6 days ago |
6-20276 6 days |
| 42276 |
yuanyi-350 author:yuanyi-350 |
feat(IMO): archive IMO 2026 Q5 |
|
IMO |
196/0 |
Archive.lean,Archive/Imo/Imo2026Q5.lean |
2 |
8 |
['felixpernegger', 'github-actions'] |
jsm28 assignee:jsm28 |
6-17614 6 days ago |
6-18158 6 days ago |
8-45005 8 days |
| 42331 |
riccardobrasca author:riccardobrasca |
feat: add ModularForm.qExpansionAlgHom |
Replace `ModularForm.qExpansionRingHom` by `ModularForm.qExpansionAlgHom`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
42/0 |
Mathlib/NumberTheory/ModularForms/QExpansion.lean |
1 |
2 |
['github-actions'] |
nobody |
6-13511 6 days ago |
6-16961 6 days ago |
6-16949 6 days |
| 37910 |
wwylele author:wwylele |
feat(Geometry/Euclidean): volume of a simplex |
This defines the volume of a simplex in Euclidean geometry, and shows that it agrees with measure theory. It also adds the basic set of lemmas (base-and-height formula, reindex, positivity, map, and restrict). Further properties of the volume will be in future PRs.
Three new file s are introduced and organized in the following dependency chain:
Def.lean -> MeasureSimplex.Lean -> Basic.lean
The Def.lean file has the definition only. MeasureSimplex.lean pulls in measure theory. Basic.lean publicly imports Def.lean, and privately imports MeasureSimplex.lean. When a downstream file imports Basic.lean, the measure theory part is not exposed and all properties of the volume is provided.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36018
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry
t-measure-probability
|
305/0 |
Mathlib.lean,Mathlib/Geometry/Euclidean/Volume/Basic.lean,Mathlib/Geometry/Euclidean/Volume/Def.lean,Mathlib/Geometry/Euclidean/Volume/MeasureSimplex.lean,MathlibTest/positivity.lean |
5 |
16 |
['YanYablonovskiy', 'copilot-pull-request-reviewer', 'felixpernegger', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'wwylele'] |
kex-y assignee:kex-y |
6-6278 6 days ago |
38-7441 38 days ago |
38-7902 38 days |
| 38214 |
emlis42 author:emlis42 |
feat(Algebra/ContinuedFractions): add Euler's continued fraction |
This PR formalizes Euler continued fractions by providing `euler` which construct one by giving head term and coefficients with some basic property.
We also introduce a transformation `GenContFract.toEuler` that maps a generalized continued fraction `g : GenContFract K` to an equivalent Euler continued fraction. |
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
364/0 |
Mathlib.lean,Mathlib/Algebra/ContinuedFractions/Euler.lean |
2 |
74 |
['YaelDillies', 'emlis42', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
6-4319 6 days ago |
6-4878 6 days ago |
93-59759 93 days |
| 41529 |
kebekus author:kebekus |
feat: Émile Borel's classic "Growth Lemma" |
Establish Émile Borel's classic **Growth Lemma**: if `S : ℝ → ℝ` is monotone on `Set.Ici a` and satisfies `1 ≤ S` there, then
`∀ᶠ r in volume.cofinite ⊓ atTop, S (r + (S r)⁻¹) ≤ 2 * S r`.
In other words: The inequality `S (r + (S r)⁻¹) ≤ 2 * S r` holds for all sufficiently large `r` outside an exceptional set `E` of finite Lebesgue measure. In Value Distribution Theory, this statement is central to the proof of the "Lemma on the Logarithmic Derivatives".
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
LLM-generated
maintainer-merge
|
142/0 |
Mathlib.lean,Mathlib/MeasureTheory/Function/BorelGrowth.lean,docs/references.bib |
3 |
7 |
['EtienneC30', 'github-actions', 'kebekus'] |
EtienneC30 assignee:EtienneC30 |
6-725 6 days ago |
6-3117 6 days ago |
28-85280 28 days |
| 41388 |
emlis42 author:emlis42 |
feat(Data/Set): add mono of right inv |
This PR adds some theorems about monotonicity of right inverse of some map.
This is mainly for discoverability and includes a strict version of `monotoneOn_of_rightInvOn_of_mapsTo` i.e `strictMonoOn_of_rightInvOn_of_mapsTo`.
Discussed here: [Lemmas about `StrictMono`/`Monotone` maps with right inverse](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Lemmas.20about.20.60StrictMono.60.2F.60Monotone.60.20maps.20with.20right.20inverse) |
t-data |
36/3 |
Mathlib/Data/Set/Monotone.lean |
1 |
3 |
['emlis42', 'felixpernegger', 'github-actions', 'themathqueen'] |
nobody |
6-303 6 days ago |
33-5860 33 days ago |
33-5848 33 days |
| 42345 |
TomOleDiem author:TomOleDiem |
feat(Analysis/Normed/Algebra): characterize continuous one-parameter subgroups |
This PR proves that every continuous one-parameter subgroup of the unit group of a real Banach algebra has a unique exponential generator.
The theorem applies to any function-like type from `Multiplicative ℝ` to `Eˣ` carrying `MonoidHomClass` and `ContinuousMapClass` instances.
The proof first derives differentiability from an invertible local average. It then identifies the subgroup with the exponential of its derivative at zero and proves uniqueness by differentiation at zero.
The new module builds successfully and passes `lint-style`.
Substantial AI assistance was used to develop and review this formalization. |
t-analysis
new-contributor
LLM-generated
|
248/0 |
Mathlib.lean,Mathlib/Analysis/Normed/Algebra/OneParameterSubgroup.lean |
2 |
3 |
['TomOleDiem', 'github-actions'] |
nobody |
6-99 6 days ago |
6-99 6 days ago |
6-87 6 days |
| 42252 |
b-mehta author:b-mehta |
feat(RingTheory/PowerSeries): coeff of a power series times a numeral |
Adds the four coeff simp lemmas for a power series multiplied by a numeral (natCast or ofNat, on either side), matching what already exists for polynomials in Mathlib/Algebra/Polynomial/Coeff.lean.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
easy
t-ring-theory
|
12/0 |
Mathlib/RingTheory/PowerSeries/Basic.lean |
1 |
2 |
['bocowgill', 'github-actions'] |
nobody |
6-5 6 days ago |
9-13029 9 days ago |
9-13017 9 days |
| 40551 |
emlis42 author:emlis42 |
feat(SetTheory/Ordinal): prove that `ε₀` and `Γ₀` are countable |
This PR proves that `ε₀` and `Γ₀` are countable, i.e. `Countable (ToType ε₀)` and `Countable (ToType Γ₀)`.
This completes a TODO in `SetTheory/Ordinal/Veblen.lean`. |
t-set-theory
large-import
|
144/2 |
Mathlib/SetTheory/Cardinal/Aleph.lean,Mathlib/SetTheory/Cardinal/Ordinal.lean,Mathlib/SetTheory/Ordinal/Basic.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/Ordinal/Veblen.lean |
5 |
53 |
['emlis42', 'felixpernegger', 'github-actions', 'plp127', 'vihdzp'] |
jjdishere assignee:jjdishere |
5-76176 5 days ago |
6-3175 6 days ago |
56-13277 56 days |
| 42332 |
plp127 author:plp127 |
feat: principal ideal is maximal iff generator is irreducible |
Prove the theorem that if a principal ideal is maximal and not generated by an idempotent, then the generator is irreducible. Prove that in a domain if a principal ideal is maximal and its generator is nonzero then it is irreducible. Prove that in a principal ideal domain a principal ideal is maximal iff its generator is irreducible.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
39/0 |
Mathlib/RingTheory/Ideal/Maximal.lean,Mathlib/RingTheory/PrincipalIdealDomain.lean |
2 |
2 |
['artie2000', 'github-actions'] |
nobody |
5-74356 5 days ago |
5-76141 5 days ago |
6-16015 6 days |
| 42319 |
xroblot author:xroblot |
feat(Algebra/Squarefree): add exists_sq_mul_squarefree |
Add `exists_sq_mul_squarefree`: every element of a unique factorization monoid is a square times a squarefree element. Also add `Squarefree.dvd_of_isSquare_mul` and `Squarefree.associated_of_isSquare_mul`, and golf the existing `Nat.sq_mul_squarefree` and `Nat.sq_mul_squarefree_of_pos` to use the new lemma.
|
t-algebra label:t-algebra$ |
33/31 |
Mathlib/Algebra/Squarefree/Basic.lean,Mathlib/Data/Nat/Squarefree.lean |
2 |
1 |
['github-actions'] |
nobody |
5-74111 5 days ago |
6-58051 6 days ago |
6-58039 6 days |
| 42113 |
LAC1213 author:LAC1213 |
feat(RingTheory/Noetherian): injective modules over a Noetherian ring… |
… surject onto localizations by powers of an element. [Hartshorne III.3.3]
Disclaimer: I used Claude to help me find the names of useful lemmas and definitions and explain lean errors to me.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
LLM-generated
|
114/0 |
Mathlib.lean,Mathlib/Algebra/Module/Torsion/Basic.lean,Mathlib/RingTheory/Noetherian/InjectiveModule.lean |
3 |
42 |
['LAC1213', 'NoahW314', 'github-actions', 'robin-carlier'] |
nobody |
5-72847 5 days ago |
11-21036 11 days ago |
11-45752 11 days |
| 42358 |
homeowmorphism author:homeowmorphism |
doc(RingTheory/Extension/Generators): remove stale TODO and clarify docstring |
Update the docstring in light of #25085 refactoring the bundled type into an unbundled type. A fix to the docstring has been done in #39705.
The TODO still to be removed and the docstring is clarified a bit to be clear that the type iota is now unbundled.
---
Use of AI: Claude Fable was used to help me understand this API in light of me working on a similar API for `Group.Presentation` (#41936). It came to my attention that the docstring was outdated and I had Claude fetch the PR history.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
7/17 |
Mathlib/RingTheory/Extension/Generators.lean |
1 |
2 |
['github-actions'] |
nobody |
5-68546 5 days ago |
5-69242 5 days ago |
5-69230 5 days |
| 39388 |
marcelolynch author:marcelolynch |
chore: remove @[expose] from def-free public sections |
Strip `@[expose]` from `public section` headers in 136 modules where no declaration needs its body visible downstream. A new sweep in the style of #38480
Found using the linter-in-progress: #39387
Relevant Zulip thread: https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Removing.20unnecessary.20.60.40.5Bexpose.5D.60/with/595180230 |
tech debt |
136/136 |
Mathlib/Algebra/Category/ModuleCat/ChangeOfRingsExact.lean,Mathlib/Algebra/Category/ModuleCat/Ext/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Adjunction.lean,Mathlib/Algebra/Category/Ring/Small.lean,Mathlib/Algebra/EuclideanDomain/Basic.lean,Mathlib/Algebra/Field/Basic.lean,Mathlib/Algebra/Field/MinimalAxioms.lean,Mathlib/Algebra/Field/Opposite.lean,Mathlib/Algebra/Field/ULift.lean,Mathlib/Algebra/Field/ZMod.lean,Mathlib/Algebra/Group/Action/Option.lean,Mathlib/Algebra/Group/Action/Sigma.lean,Mathlib/Algebra/Group/Action/Sum.lean,Mathlib/Algebra/Group/Action/Units.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Group/Submonoid/MulAction.lean,Mathlib/Algebra/Homology/ModelCategory/Injective.lean,Mathlib/Algebra/Module/Projective.lean,Mathlib/Algebra/Module/Submodule/Basic.lean,Mathlib/Algebra/MonoidAlgebra/PointwiseSMul.lean,Mathlib/Algebra/NonAssoc/LieAdmissible/Defs.lean,Mathlib/Algebra/Notation/Prod.lean,Mathlib/Algebra/Order/Antidiag/Tendsto.lean,Mathlib/Algebra/Order/Floor/Div.lean,Mathlib/Algebra/Order/Group/Action/End.lean,Mathlib/Algebra/Order/Group/End.lean,Mathlib/Algebra/Order/Group/PosPart.lean,Mathlib/Algebra/Order/Kleene.lean,Mathlib/Algebra/Order/Pi.lean,Mathlib/Algebra/Ring/Commute.lean,Mathlib/Algebra/Star/TransferInstance.lean,Mathlib/AlgebraicGeometry/Birational/Dominant.lean,Mathlib/AlgebraicTopology/ModelCategory/Over.lean,Mathlib/AlgebraicTopology/SimplicialSet/AnodyneExtensions/Inner/PushoutProduct.lean,Mathlib/AlgebraicTopology/SimplicialSet/AnodyneExtensions/PushoutProduct.lean,Mathlib/Analysis/Calculus/TaylorIntegral.lean,Mathlib/Analysis/Normed/Algebra/TrivSqZeroExt.lean,Mathlib/Analysis/Normed/Group/Constructions.lean,Mathlib/Analysis/Normed/Module/MStructure.lean,Mathlib/Analysis/Normed/Operator/Compact/FiniteDimension.lean,Mathlib/Analysis/ODE/DiscreteGronwall.lean,Mathlib/Analysis/Polynomial/Norm.lean,Mathlib/CategoryTheory/Adjunction/ParametrizedLimits.lean,Mathlib/CategoryTheory/Comma/CatCommSq.lean,Mathlib/CategoryTheory/Localization/DerivabilityStructure/OfLocalizedEquivalences.lean,Mathlib/CategoryTheory/MarkovCategory/Positive.lean,Mathlib/CategoryTheory/Monoidal/Cartesian/Normal.lean,Mathlib/CategoryTheory/Monoidal/Functor/Types.lean,Mathlib/CategoryTheory/Monoidal/Types/Coyoneda.lean,Mathlib/CategoryTheory/Preadditive/Comma.lean,Mathlib/CategoryTheory/Preadditive/Injective/InjectiveObject.lean,Mathlib/CategoryTheory/Sites/CoversTop/Over.lean,Mathlib/CategoryTheory/Sites/Precoverage/Generates.lean,Mathlib/Combinatorics/Additive/FreimanHom.lean,Mathlib/Computability/AkraBazzi/AkraBazzi.lean,Mathlib/Data/ENNReal/Action.lean,Mathlib/Data/Fin/Init.lean,Mathlib/Data/Finsupp/Pointwise.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/FunLike/Embedding.lean,Mathlib/Data/FunLike/Equiv.lean,Mathlib/Data/FunLike/Ring.lean,Mathlib/Data/Int/Cast/Pi.lean,Mathlib/Data/LawfulXor/Basic.lean,Mathlib/Data/List/Monad.lean,Mathlib/Data/Prod/Lex.lean,Mathlib/Data/Rat/Cast/Defs.lean,Mathlib/Data/Rat/Cast/OfScientific.lean,Mathlib/Data/ZMod/IntUnitsPower.lean,Mathlib/GroupTheory/Congruence/Star.lean,Mathlib/GroupTheory/GroupAction/Embedding.lean,Mathlib/GroupTheory/IsPerfect.lean,Mathlib/GroupTheory/MonoidLocalization/UniqueFactorization.lean,Mathlib/GroupTheory/ResiduallyFinite.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Star.lean,Mathlib/LinearAlgebra/FreeModule/Finite/Matrix.lean,Mathlib/LinearAlgebra/InvariantBasisNumber.lean,Mathlib/LinearAlgebra/Matrix/GeneralLinearGroup/MvPolynomial.lean,Mathlib/LinearAlgebra/Matrix/HadamardMatrix.lean,Mathlib/LinearAlgebra/Projectivization/PSL/PSL2.lean,Mathlib/LinearAlgebra/RootSystem/GeckConstruction/Semisimple.lean,Mathlib/LinearAlgebra/Transvection/Generation.lean,Mathlib/MeasureTheory/Function/L2Space.lean,Mathlib/MeasureTheory/Function/LpSpace/CompleteOfCompleteLp.lean,Mathlib/MeasureTheory/Integral/IntegralEqImproper.lean,Mathlib/MeasureTheory/Measure/Sub.lean,Mathlib/MeasureTheory/Measure/Typeclasses/ZeroOne.lean,Mathlib/MeasureTheory/VectorMeasure/SetIntegral.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Summable.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Transform.lean,Mathlib/NumberTheory/NumberField/ExistsRamified.lean,Mathlib/NumberTheory/NumberField/Ideal/Asymptotics.lean,Mathlib/NumberTheory/Padics/PadicVal/Defs.lean,Mathlib/NumberTheory/RamificationInertia/Valuation.lean,Mathlib/Order/CompleteLattice/PiLex.lean,Mathlib/Order/Filter/FilterProduct.lean,Mathlib/Order/Interval/Finset/Floor.lean,Mathlib/Order/Interval/Set/OrdConnected.lean,Mathlib/Order/Northcott.lean,Mathlib/Order/Quotient.lean |
136 |
8 |
['eric-wieser', 'github-actions', 'grunweg', 'marcelolynch', 'mathlib-merge-conflicts', 'urkud'] |
JovanGerb assignee:JovanGerb |
5-67877 5 days ago |
10-7413 10 days ago |
25-31033 25 days |
| 39736 |
NoahW314 author:NoahW314 |
feat(RingTheory/MvPolynomial/MonomialOrder): add `leadingTerm` lemmas |
Add lemmas for `leadingTerm` to match those for `leadingCoeff`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
87/0 |
Mathlib/RingTheory/MvPolynomial/MonomialOrder.lean |
1 |
5 |
['Hagb', 'NoahW314', 'github-actions'] |
jjdishere assignee:jjdishere |
5-67876 5 days ago |
76-59689 76 days ago |
76-59677 76 days |
| 41935 |
martinamaggio author:martinamaggio |
feat(Probability/Independence): grouping an independent family by pairwise disjoint index sets |
If `m : ι → MeasurableSpace Ω` is an independent family of σ-algebras and `G : ι' → Set ι` is a
pairwise disjoint family of index sets, then the family of grouped σ-algebras
`fun i' ↦ ⨆ j ∈ G i', m j` is again independent.
This is the indexed-family version of the existing two-group lemma `indep_iSup_of_disjoint`, from
which it follows by induction on the finite subfamily, peeling off one group at a time against the
union of the remaining ones. As usual it is proven for the kernel notion of independence
(`Kernel.iIndep_iSup_of_disjoint`) and specialized to independence w.r.t. a measure
(`iIndep_iSup_of_disjoint`) and to conditional independence (`iCondIndep_iSup_of_disjoint`).
The lemma is the natural bridge from an independent family to block/grouping arguments — e.g.
Markov-style properties of recursions driven by disjoint sets of randomness sources. It was
developed for a formalization of end-to-end latency distributions of periodic task chains, where it
establishes that successive chain states, being measurable w.r.t. σ-algebras of disjoint groups of
an independent family, form an independent family themselves. |
t-measure-probability
new-contributor
|
52/0 |
Mathlib/Probability/Independence/Basic.lean,Mathlib/Probability/Independence/Conditional.lean,Mathlib/Probability/Independence/Kernel/Indep.lean |
3 |
4 |
['bocowgill', 'github-actions'] |
kex-y assignee:kex-y |
5-67871 5 days ago |
18-78505 18 days ago |
18-78493 18 days |
| 34910 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Acyclic): a graph is a tree iff it's acyclic and has exactly `n - 1` edges |
---
This was my white whale for quite some time. Hooray!
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #34907
- [x] depends on: #34909
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
70/3 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Order/RelIso/Basic.lean |
3 |
24 |
['Rida-Hamadani', 'SnirBroshi', 'amellendijk', 'github-actions', 'jt0202', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
5-66970 5 days ago |
26-84008 26 days ago |
52-32757 52 days |
| 40156 |
JovanGerb author:JovanGerb |
perf: reduce priority of `DivisionSemiring.toSemiring` |
This PR reduces the priority of `DivisionSemiring.toSemiring`. This is relevant because a lot of type class search starts at `Semiring`, so we need to ensure that the instances that apply to `Semiring` are tried in a sensible order. In particular, this will now prefer `CommSemiring.toSemiring`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
18/15 |
Mathlib/Algebra/Field/Defs.lean,Mathlib/Algebra/Quaternion.lean,Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/Calculus/FDeriv/Add.lean,Mathlib/FieldTheory/SeparableClosure.lean,Mathlib/RingTheory/Etale/Field.lean,Mathlib/RingTheory/QuasiFinite/Polynomial.lean,MathlibTest/GalNotation.lean,MathlibTest/Tactic/Ring/Ring.lean |
9 |
8 |
['JovanGerb', 'github-actions', 'kbuzzard', 'leanprover-radar', 'themathqueen'] |
nobody |
5-66967 5 days ago |
64-11980 64 days ago |
64-13733 64 days |
| 42360 |
vihdzp author:vihdzp |
chore: make `IsStronglyAtomic.of_wellFounded_lt` into an instance |
We use the `WellFoundedLT` typeclass, instead of writing `WellFounded (· < ·)` explicitly.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
16/17 |
Mathlib/Algebra/Lie/Submodule.lean,Mathlib/Order/Atoms.lean |
2 |
1 |
['github-actions'] |
nobody |
5-62266 5 days ago |
5-64625 5 days ago |
5-64965 5 days |
| 42363 |
ghseeli author:ghseeli |
feat(Combinatorics): card_le_card_biUnion_of_card_le_card |
This PR contributes a lemma to combinatorics, `card_le_card_biUnion_of_card_le_card`. this is a set theoretic corollary of a double counting result proved for bipartite graphs (`Finset.sum_card_bipartiteAbove_eq_sum_card_bipartiteBelow`). This result was needed for our Latin Square PR https://github.com/leanprover-community/mathlib4/pull/36698. This result was proved in less general terms in that PR, but is independent of Latin Square considerations and so we have generalized and moved it into this file.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
27/0 |
Mathlib/Combinatorics/Enumerative/DoubleCounting.lean |
1 |
2 |
['github-actions'] |
nobody |
5-60851 5 days ago |
5-60851 5 days ago |
5-61057 5 days |
| 39802 |
vihdzp author:vihdzp |
feat: more theorems on `toBoolRing` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
24/0 |
Mathlib/Algebra/Ring/BooleanRing.lean |
1 |
11 |
['github-actions', 'plp127', 'themathqueen', 'vihdzp'] |
themathqueen assignee:themathqueen |
5-60037 5 days ago |
5-60589 5 days ago |
39-69472 39 days |
| 38310 |
ZRTMRH author:ZRTMRH |
feat(Combinatorics/Quiver/Schreier): word evaluation and reachability |
Adds word evaluation and reachability results to the Schreier graph API.
* `SchreierGraph.evalWord` : evaluates a word `List (S × Bool)` as an element of the ambient group, where `(s, true)` contributes `ι s` and `(s, false)` contributes `(ι s)⁻¹`.
* `SchreierGraph.evalWord_eq_lift` : agreement with `FreeGroup.lift`.
* `SchreierGraph.evalWord_mem_closure` : every word evaluates into the subgroup generated by `ι`.
* `SchreierGraph.pathFromWord` : a Bool-tagged word yields a path in `Symmetrify (SchreierGraph V ι)` from `x` to `evalWord ι w • x`.
* `SchreierGraph.reachable_iff` : two vertices are connected by a path in the symmetrification iff some element of the subgroup closure carries one to the other.
Follow-up to #36320.
This PR was written with AI assistance (Claude). The code has been reviewed by the author.
---
- [x] depends on: #41849
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
large-import
LLM-generated
|
129/0 |
Mathlib/Combinatorics/Quiver/Schreier.lean |
1 |
16 |
['YaelDillies', 'ZRTMRH', 'github-actions', 'mathlib-dependent-issues'] |
YaelDillies assignee:YaelDillies |
5-34888 5 days ago |
5-34888 5 days ago |
94-85087 94 days |
| 42324 |
yuanyi-350 author:yuanyi-350 |
feat(Topology/ContinuousMap): add bundled subtype coercion |
|
t-algebraic-topology |
17/0 |
Mathlib/Topology/ContinuousMap/Basic.lean |
1 |
2 |
['github-actions', 'joelriou'] |
nobody |
5-26504 5 days ago |
5-28206 5 days ago |
6-19877 6 days |
| 42349 |
teorth author:teorth |
feat(Analysis/SpecialFunctions/Gamma/Digamma): reflection formula for digamma |
Establishes the Euler reflection formula for the digamma function, by taking the log derivative of the corresponding reflection formula for the Gamma function.
---
Inspired by https://github.com/leanprover-community/mathlib4/pull/41120#discussion_r3695475523
An initial proof of this theorem was generated by an AI, but heavily rewritten by the author.
[](https://gitpod.io/from-referrer/)
|
t-analysis |
16/0 |
Mathlib/Analysis/SpecialFunctions/Gamma/Digamma.lean |
1 |
4 |
['felixpernegger', 'github-actions', 'teorth'] |
nobody |
5-19235 5 days ago |
5-75319 5 days ago |
5-75401 5 days |
| 42370 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Maps): more `map`/`comap` API |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
120/12 |
Mathlib/Combinatorics/SimpleGraph/Maps.lean |
1 |
1 |
['github-actions'] |
nobody |
5-18023 5 days ago |
5-18885 5 days ago |
5-18977 5 days |
| 42371 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Basic): `Infinite V → Infinite (SimpleGraph V)` |
Matches the existing `Finite V → Finite (SimpleGraph V)`.
---
I wonder if there's an easier/shorter solution.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
5/0 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
5-17234 5 days ago |
5-17983 5 days ago |
5-17971 5 days |
| 42369 |
SnirBroshi author:SnirBroshi |
fix: remove `DecidableEq Prop` instance |
Convert the `LinearOrder Prop` and `CompleteLinearOrder Prop` instances into `def`s, to avoid providing a global `DecidableEq Prop` instance.
We can convert them back when the decidability fields are removed from `LinearOrder`, but very few places need `LinearOrder Prop` so this seems like a good fix until that happens.
Note that the `DecidableEq Prop` instance causes diamonds with [`instDecidableEqOfIff`](https://leanprover-community.github.io/mathlib4_docs/Init/Core.html#instDecidableEqOfIff).
See [#mathlib4 > leaked `DecidableEq Prop`](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/leaked.20.60DecidableEq.20Prop.60/with/564769361)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
47/9 |
Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Data/Fintype/Sets.lean,Mathlib/Data/Multiset/Filter.lean,Mathlib/Data/Nat/Periodic.lean,Mathlib/Order/CompleteLattice/Basic.lean,Mathlib/Order/PropInstances.lean,Mathlib/RingTheory/Norm/Transitivity.lean,Mathlib/Topology/OmegaCompletePartialOrder.lean,Mathlib/Topology/Order/LowerUpperTopology.lean,Mathlib/Topology/Order/ScottTopology.lean,Mathlib/Topology/Separation/LinearUpperLowerSetTopology.lean,MathlibTest/Instances/DecidableEqProp.lean |
12 |
1 |
['github-actions'] |
nobody |
5-16653 5 days ago |
5-19961 5 days ago |
5-19949 5 days |
| 42273 |
astrainfinita author:astrainfinita |
chore: remove `CovariantClass` and `ContravariantClass` |
This PR continues the work from #13124.
Original PR: https://github.com/leanprover-community/mathlib4/pull/13124 |
t-algebra
t-order
tech debt
label:t-algebra$ |
526/322 |
Mathlib/Algebra/AddConstMap/Basic.lean,Mathlib/Algebra/Algebra/Operations.lean,Mathlib/Algebra/Algebra/Subalgebra/Pointwise.lean,Mathlib/Algebra/Group/Subgroup/Pointwise.lean,Mathlib/Algebra/Group/Submonoid/Pointwise.lean,Mathlib/Algebra/Module/Submodule/Pointwise.lean,Mathlib/Algebra/Order/AddTorsor.lean,Mathlib/Algebra/Order/Group/Action.lean,Mathlib/Algebra/Order/GroupWithZero/Basic.lean,Mathlib/Algebra/Order/GroupWithZero/Defs.lean,Mathlib/Algebra/Order/Monoid/Defs.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Defs.lean,Mathlib/Algebra/Order/Monoid/Unbundled/OrderDual.lean,Mathlib/Algebra/Order/Monoid/Unbundled/WithTop.lean,Mathlib/Algebra/Order/Quantale.lean,Mathlib/Algebra/Order/Ring/Canonical.lean,Mathlib/Algebra/Order/Ring/WithTop.lean,Mathlib/Algebra/Ring/Subring/Pointwise.lean,Mathlib/Algebra/Ring/Subsemiring/Pointwise.lean,Mathlib/Analysis/RCLike/Basic.lean,Mathlib/Analysis/SumOverResidueClass.lean,Mathlib/Data/ENNReal/Action.lean,Mathlib/Data/EReal/Inv.lean,Mathlib/GroupTheory/OrderOfElement.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/Order/Filter/Pointwise.lean,Mathlib/RingTheory/DedekindDomain/Ideal/Basic.lean,Mathlib/RingTheory/Ideal/Pointwise.lean,Mathlib/RingTheory/Valuation/ValuationSubring.lean |
30 |
7 |
['astrainfinita', 'github-actions', 'leanprover-radar', 'vihdzp'] |
nobody |
5-16456 5 days ago |
6-18804 6 days ago |
6-22183 6 days |
| 41705 |
kbuzzard author:kbuzzard |
perf: speed up kernel typechecking of some of mathlib's slowest declarations |
This PR changes some of the proofs in mathlib which were slowest to typecheck in the kernel. Typically there is some kind of defeq abuse going on in master, which the elaborator is quick to accept but which the kernel doesn't like, typically resulting in the unfolding of a large amount of stuff. Hopefully all the changes are uncontroversial. The problematic declarations were located with an LLM and changes were also initially written by an LLM but some fixes were complex, and I removed most of these from his PR because they were fiddling with parts of the codebase I didn't know well. I have now gone through everything manually, tidied up, and tested that indeed this is making mathlib quicker in every case.
The added declaration `strictMono_valueGroupEquiv` in `Mathlib/RingTheory/DedekindDomain/AdicValuation.lean` is to tidy up one of the slow proofs. |
LLM-generated |
21/11 |
Mathlib/Algebra/Category/ModuleCat/Sheaf/PushforwardContinuous.lean,Mathlib/Analysis/InnerProductSpace/Adjoint.lean,Mathlib/RingTheory/DedekindDomain/AdicValuation.lean,Mathlib/RingTheory/Etale/Field.lean |
4 |
8 |
['github-actions', 'kbuzzard', 'leanprover-radar', 'mathlib-merge-conflicts', 'metakunt'] |
nobody |
5-14837 5 days ago |
10-19438 10 days ago |
10-19704 10 days |
| 42367 |
plp127 author:plp127 |
chore: remove `IsDedekindDomainDvr` |
Remove `IsDedekindDomainDvr`, because is the same as `IsDedekindDomain`. See [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/three.20dedekind.20domains/near/574535735).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
|
47/65 |
Mathlib/NumberTheory/NumberField/ExistsRamified.lean,Mathlib/RingTheory/DedekindDomain/Dvr.lean,Mathlib/RingTheory/Trace/Quotient.lean,Mathlib/RingTheory/Unramified/Dedekind.lean |
4 |
4 |
['github-actions', 'kbuzzard', 'plp127'] |
nobody |
5-12763 5 days ago |
5-58635 5 days ago |
5-58988 5 days |
| 25834 |
Rida-Hamadani author:Rida-Hamadani |
feat(SimpleGraph): girth-diameter inequality |
This is a useful inequality that comes up in proofs related to Moore graphs, cages, SRGs, and so on.
Co-authored-by: Malhar A. Patel <142735852+Mal-Pat@users.noreply.github.com>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [x] depends on: #xyz [optional extra text]
-->
- [x] depends on: #26380
- [x] depends on: #25650
- [x] depends on: #26614
- [x] depends on: #33249
- [x] depends on: #33506
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
29/6 |
Mathlib/Combinatorics/SimpleGraph/Diam.lean,Mathlib/Combinatorics/SimpleGraph/Girth.lean,Mathlib/Combinatorics/SimpleGraph/Metric.lean |
3 |
17 |
['Rida-Hamadani', 'SnirBroshi', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
nobody |
5-11079 5 days ago |
5-67292 5 days ago |
35-62357 35 days |
| 42322 |
EtienneC30 author:EtienneC30 |
refactor: change `ProbabilityMeasure.map` to not require measurability |
Currently, if `µ : ProbabilityMeasure X` and `f : X -> Y`, then to talk about the pushforward of `µ` by `f` one must assume `hf : AEMeasurable f µ` and write `µ.map hf`. The issue with this is that if `hf` is not available as is then providing it explicitly quickly gets the code hard to read (for instance in the PR I replaced some `f_cont.measurable.aemeasurable` by just `f`). Thus we change the definition so that `µ.map f` is some arbitrary Dirac mass if `f` is not measurable (note that `X` is not empty because it has a probability measure, and thus `Y` is not empty either).
The only issue seems to be that [MeasureTheory.ProbabilityMeasure.toMeasure_map](https://leanprover-community.github.io/mathlib4_docs/Mathlib/MeasureTheory/Measure/ProbabilityMeasure.html#MeasureTheory.ProbabilityMeasure.toMeasure_map) now requires a measurability hypothesis to trigger with `simp`, I personally think that's ok.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
33/24 |
Mathlib/MeasureTheory/Function/ConvergenceInDistribution.lean,Mathlib/MeasureTheory/Measure/FiniteMeasureProd.lean,Mathlib/MeasureTheory/Measure/ProbabilityMeasure.lean |
3 |
5 |
['D-Thomine', 'EtienneC30', 'github-actions'] |
RemyDegenne assignee:RemyDegenne |
5-8153 5 days ago |
6-44874 6 days ago |
6-44862 6 days |
| 40180 |
FMLJohn author:FMLJohn |
feat(Topology/Spectral/ConstructibleTopology): the constructible topology on a compact quasi-separated space `X` equals the topology generated by the constructible subsets of `X` |
In this pull request, I have proved that the constructible topology on a compact quasi-separated space `X` equals the topology generated by the constructible subsets of `X`. This holds in particular for spectral spaces.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
t-topology |
84/2 |
Mathlib.lean,Mathlib/Order/BooleanSubalgebra.lean,Mathlib/Topology/Order/GenerateFromLattice.lean,Mathlib/Topology/Spectral/ConstructibleTopology.lean |
4 |
23 |
['FMLJohn', 'chrisflav', 'github-actions', 'plp127'] |
PatrickMassot and chrisflav assignee:PatrickMassot assignee:chrisflav |
5-4944 5 days ago |
17-4204 17 days ago |
53-81679 53 days |
| 40344 |
FMLJohn author:FMLJohn |
feat(RingTheory/Adjoin/Polynomial/Basic): `Algebra.adjoin_mem_exists_aeval'` and `Algebra.adjoin_eq_exists_aeval'` |
In this pull request, I have proved the following result:
Suppose `R` and `A` are commutative semirings with `Algebra R A`, `S` is a subset of `A`, `a` is an element of `A` that belongs to `adjoin R S`, and `f : σ → A` satisfies `S ⊆ Set.range f`, then there exists a multivariate polynomial `p : MvPolynomial σ R` such that `p.aeval f = a`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
t-ring-theory |
19/0 |
Mathlib/RingTheory/Adjoin/Polynomial/Basic.lean |
1 |
4 |
['github-actions', 'plp127'] |
nobody |
5-4349 5 days ago |
60-1528 60 days ago |
60-21474 60 days |
| 42365 |
hawkrobe author:hawkrobe |
feat(LinearAlgebra/TensorProduct): tensor product of graded modules is graded |
---
Split from #39849, also a first step toward the TODO in `LinearAlgebra/TensorProduct/Graded/Internal.lean` (the tensor product of graded algebras is graded.) I tried to model it after [AddMonoidAlgebra.gradeBy](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/MonoidAlgebra/Grading.html#AddMonoidAlgebra.gradeBy).
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
121/0 |
Mathlib/Data/DFinsupp/Defs.lean,Mathlib/LinearAlgebra/TensorProduct/Decomposition.lean,Mathlib/LinearAlgebra/TensorProduct/Map.lean |
3 |
2 |
['github-actions'] |
nobody |
4-84553 4 days ago |
4-84553 4 days ago |
4-84541 4 days |
| 35078 |
grunweg author:grunweg |
feat: immersed points |
Define immersed points of a (differentiable) map between manifolds, and prove that immersed points compose.
Future PRs show that `x` is an immersed point of `f` if and only if `f` is an immersion at `x`:
thus, proving the composition of immersed points (which follows immediately from the chain rule)
implies the composition of immersions (which is not obvious from their definition.
From the path towards immersions, embeddings and submanifolds.
---
- [x] depends on: #35057
- [x] depends on: #35284
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
187/1 |
Mathlib.lean,Mathlib/Analysis/Normed/Module/ContinuousInverse.lean,Mathlib/Geometry/Manifold/ImmersedPoint.lean,Mathlib/Geometry/Manifold/LocalDiffeomorph.lean |
4 |
5 |
['github-actions', 'grunweg', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
sgouezel assignee:sgouezel |
4-67877 4 days ago |
22-85528 22 days ago |
22-85522 22 days |
| 36146 |
Multramate author:Multramate |
feat(AlgebraicGeometry/GammaSpecAdjunction): add equivalences for Spec morphisms that commute with algebra maps |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
t-algebra
label:t-algebra$ |
47/2 |
Mathlib/Algebra/Category/CommAlgCat/Basic.lean,Mathlib/AlgebraicGeometry/GammaSpecAdjunction.lean,Mathlib/AlgebraicGeometry/Scheme.lean |
3 |
18 |
['CBirkbeck', 'Multramate', 'chrisflav', 'erdOne', 'github-actions'] |
joelriou assignee:joelriou |
4-67876 4 days ago |
37-35100 37 days ago |
49-81339 49 days |
| 39953 |
plp127 author:plp127 |
feat(RingTheory/Valuation): embedding of valuation groups |
We show that if `vR` and `vA` are valuations satisfying `vR.HasExtension vA`, then there is an induced embedding of the valuation groups compatible with the valuations and with the extension.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
39/1 |
Mathlib/Algebra/Group/WithOne/Defs.lean,Mathlib/RingTheory/Valuation/Extension.lean |
2 |
6 |
['faenuccio', 'github-actions', 'plp127', 'riccardobrasca'] |
nobody |
4-66975 4 days ago |
62-25548 62 days ago |
71-61556 71 days |
| 40613 |
LLaurance author:LLaurance |
feat(Probability): expectation of a binomial random variable |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
maintainer-merge
|
16/1 |
Mathlib/Probability/Distributions/Binomial.lean |
1 |
3 |
['EtienneC30', 'github-actions'] |
nobody |
4-66971 4 days ago |
53-56106 53 days ago |
53-56094 53 days |
| 42394 |
SnirBroshi author:SnirBroshi |
fix(Algebra/GroupWithZero/Associated): de-`abbrev` `Associates` |
`Associates` is an `abbrev` for `Quotient _`, but there are many `instance`s defined on it.
Some of them create diamonds with general `Quotient` instances: `Inhabited`, `Unique`, and most notably `Preorder`.
While `Associates` has a `Preorder` instance that uses the divisibility relation, any monoid with a `Preorder` will have its ordering lifted to the `Quotient`. So currently `Associates ℕ` has two different `LE` orders defined on it that disagree on `2 ≤ 3`.
This changes `Associates` to a `def` tagged with `@[implicit_reducible]`.
---
The `nonZeroDivisors` proof is now a bit awkward, since the `Equiv` works for `Quotient`s but `simp` refuses to evaluate the `Equiv` because `Associate` elements are multiplied but `Quotient` doesn't have that multiplication. Though `rw` works thanks to `@[implicit_reducible]`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
|
26/11 |
Mathlib/Algebra/GroupWithZero/Associated.lean,Mathlib/Algebra/GroupWithZero/NonZeroDivisors.lean,Mathlib/RingTheory/Ideal/IsPrincipal.lean |
3 |
1 |
['github-actions'] |
nobody |
4-53064 4 days ago |
4-55601 4 days ago |
4-57866 4 days |
| 42137 |
mitchell-horner author:mitchell-horner |
feat(Combinatorics/SimpleGraph): bounds for `extremalNumber` and `turanDensity` |
Add bounds for `extremalNumber` and `turanDensity`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
37/0 |
Mathlib/Combinatorics/SimpleGraph/Extremal/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Extremal/TuranDensity.lean |
2 |
6 |
['SnirBroshi', 'b-mehta', 'github-actions', 'mitchell-horner'] |
nobody |
4-47591 4 days ago |
11-25753 11 days ago |
11-25741 11 days |
| 42373 |
astrainfinita author:astrainfinita |
chore(Order/Defs/LinearOrder): move fundamental lemmas |
Also simplifies the proofs of several lemmas.
This prepares for #35881.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
35/48 |
Mathlib/Algebra/Polynomial/Reverse.lean,Mathlib/Analysis/Normed/Module/Multilinear/Basic.lean,Mathlib/Data/List/Infix.lean,Mathlib/Order/Defs/LinearOrder.lean,Mathlib/Order/Lattice.lean,Mathlib/Order/MinMax.lean,Mathlib/Tactic/Order/ToInt.lean |
7 |
1 |
['github-actions', 'vihdzp'] |
nobody |
4-33810 4 days ago |
5-12973 5 days ago |
5-12961 5 days |
| 33369 |
Thmoas-Guan author:Thmoas-Guan |
feat(Homology): `Ext` commute with flat base change |
In this PR, using the linear map `Ext(M,N) => Ext(F(M), F(N))` when `F` is exact functor, we prove that `Ext` commute with flat base change if the ring is noetherian and two modules are finitely generated, stated using `IsBaseChange`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #31046
- [ ] depends on: #31222
- [x] depends on: #32316
[](https://gitpod.io/from-referrer/)
|
t-topology |
383/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/Ext/BaseChange.lean |
2 |
7 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
nobody |
4-31077 4 days ago |
4-31595 4 days ago |
4-49938 4 days |
| 40788 |
FrankieNC author:FrankieNC |
feat: uniformly integrable Lᵖ tails tend to 0 uniformly |
Adds `UniformIntegrable.tendsto_iSup_eLpNorm_indicator_atTop`: for a uniformly
integrable family `f`,
Tendsto (fun M ↦ ⨆ i, eLpNorm ({x | M ≤ ‖f i x‖₊}.indicator (f i)) p μ) atTop (𝓝 0).
This is the `Tendsto` companion to the existing `UniformIntegrable.spec`, which only
provides, for each `ε`, a single threshold `C`.
This is the form that arises when truncating an L¹/Lᵖ family at increasing norm
levels — e.g. vector-valued truncation / Komlós-type arguments — where the existing
ProbabilityTheory.truncation does not apply, being real- and order-interval-valued.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
brownian
maintainer-merge
|
113/5 |
Mathlib/MeasureTheory/Function/UniformIntegrable.lean |
1 |
22 |
['CoolRmal', 'EtienneC30', 'FrankieNC', 'github-actions'] |
EtienneC30 assignee:EtienneC30 |
4-30112 4 days ago |
4-35627 4 days ago |
48-76964 48 days |
| 41847 |
stalex444 author:stalex444 |
feat(Analysis/Matrix): tightness of the Tsirelson bound |
This PR adds Mathlib/Analysis/Matrix/CHSH.lean, closing the "Future work" item in Mathlib/Algebra/Star/CHSH.lean (whose header is updated in this same PR; module registered via mk_all).
It constructs the explicit real-Pauli CHSH tuple in 4×4 real matrices — X⊗1, Z⊗1, and (√2)⁻¹·(1⊗(X±Z)) — and proves it's a CHSH tuple. It also shows its CHSH operator sends the Bell vector ![1,0,0,1] to √2^3 times itself (the eigenvalue the Future-work item asked for).
The PR also goes further than the request: √2^3 is the least constant bounding that operator in the Loewner order (via the scoped MatrixOrder instances + the existing tsirelson_inequality), so the constant in tsirelson_inequality cannot be improved.
Small honest caveat worth stating: the "over every algebra" corollary quantifies over Type (universe-0), since hypotheses can't quantify universes; the concrete least-constant statement is universe-free.
This Lean code was drafted with the help of AI (Claude Code). I reviewed the file; built it locally against current Mathlib master and confirmed that it compiled.
---
Questions for reviewers:
- happy to make B₀' and B₁' private if preferred
- happy to provide a ℂ-matrix version if that's more useful
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
LLM-generated
|
229/6 |
Mathlib.lean,Mathlib/Algebra/Star/CHSH.lean,Mathlib/Analysis/Matrix/CHSH.lean |
3 |
5 |
['github-actions', 'stalex444'] |
nobody |
4-27917 4 days ago |
21-68457 21 days ago |
21-68445 21 days |
| 41871 |
stalex444 author:stalex444 |
feat(RingTheory/IntegralClosure): integer powers of integral elements are integral |
This PR adds IsIntegral.zpow and its subalgebra-membership analogs (zpow_mem, zpow_mem_adjoin, Algebra.IsIntegral.zpow_mem), generalizing the existing inv lemmas from the −1 power to all integer powers.
This Lean code was drafted with the help of AI (Claude Code), I reviewed it and built it locally against the current master.
---
Happy to adjust the placement or the type-variable names.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
LLM-generated
new-contributor
|
20/0 |
Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean |
1 |
10 |
['SnirBroshi', 'github-actions', 'stalex444'] |
nobody |
4-27430 4 days ago |
21-3718 21 days ago |
21-3706 21 days |
| 41769 |
mckoen author:mckoen |
feat(CategoryTheory/Abelian/Subobject): correspondence theorem for subobjects in abelian categories |
Given a subobject `Y` of `X` in an abelian category, we construct an order-isomorphism between subobjects of the "quotient" `X/Y := cokernel (Y ↪ X)` and subobjects of `X` containing `Y`.
Following Popescu's "Abelian Categories with Applications to Rings and Modules", a morphism `f : X ⟶ Y` induces a functor `Subobject X ⥤ Subobject Y` by `X' ↦ kernel (cokernel.π (X'.arrow ≫ f))`, and a functor `Subobject Y ⥤ Subobject X` by `Y' ↦ kernel (f ≫ cokernel.π Y'.arrow)`. We show these are equivalent to the existing, generic `Subobject.exists` and `Subobject.pullback` functors, and use these to define the correspondence.
Some miscellaneous API is also added.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
337/9 |
Mathlib/CategoryTheory/Abelian/Basic.lean,Mathlib/CategoryTheory/Abelian/ShortExact.lean,Mathlib/CategoryTheory/Abelian/Subobject.lean,Mathlib/CategoryTheory/Subobject/Basic.lean,Mathlib/CategoryTheory/Subobject/Lattice.lean,Mathlib/CategoryTheory/Subobject/Limits.lean,Mathlib/CategoryTheory/Subobject/MonoOver.lean,docs/references.bib |
8 |
8 |
['github-actions', 'joelriou', 'justus-springer', 'mckoen', 'tb65536'] |
dagurtomas assignee:dagurtomas |
4-27095 4 days ago |
7-19051 7 days ago |
22-60894 22 days |
| 41139 |
Deicyde author:Deicyde |
doc: add wikidata attributes |
This PR adds a batch of 20 `@[wikidata]` attributes.
Claude helped generate the list of crossrefs (by scanning Wikidata + Mathlib). Comments are generated by [crossref-report](https://github.com/jcommelin/mathlib-crossref-report) and Wikilean.
See https://wikilean.jackmccarthy.org/review?pr=41139 for reviewer UI.
---
|
LLM-generated |
39/4 |
Mathlib/Algebra/IsPrimePow.lean,Mathlib/Analysis/Complex/Circle.lean,Mathlib/Analysis/InnerProductSpace/Adjoint.lean,Mathlib/Analysis/Normed/Algebra/Spectrum.lean,Mathlib/Analysis/Normed/Operator/BoundedLinearMaps.lean,Mathlib/Combinatorics/Digraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Finite.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean,Mathlib/Data/Set/Operations.lean,Mathlib/Geometry/Manifold/Instances/Real.lean,Mathlib/LinearAlgebra/BilinearMap.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/Basic.lean,Mathlib/LinearAlgebra/Matrix/Symmetric.lean,Mathlib/LinearAlgebra/RootSystem/WeylGroup.lean,Mathlib/MeasureTheory/Function/L1Space/Integrable.lean,Mathlib/MeasureTheory/OuterMeasure/AE.lean,Mathlib/NumberTheory/NumberField/Basic.lean,Mathlib/RingTheory/ClassGroup/Basic.lean,Mathlib/Topology/Defs/Basic.lean |
20 |
30 |
['Deicyde', 'SnirBroshi', 'faenuccio', 'github-actions'] |
nobody |
4-23467 4 days ago |
14-11346 14 days ago |
35-48450 35 days |
| 26214 |
Thmoas-Guan author:Thmoas-Guan |
feat(Algebra): definition of depth |
In this PR, we defined the depth of two modules as the minimal order of nonvanishing `Ext` and the `I-depth` for ideal `I` and some basic properties. Including the equivalence of the two in the condition of rees theorem.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #26212
- [x] depends on: #32966
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
410/0 |
Mathlib.lean,Mathlib/RingTheory/Depth/Basic.lean |
2 |
11 |
['Thmoas-Guan', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
nobody |
4-21554 4 days ago |
20-37275 20 days ago |
33-33752 33 days |
| 41632 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Trails): the support of an Eulerian trail equals the support of the graph |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
32/0 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Trails.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
3 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
4-16309 4 days ago |
4-16875 4 days ago |
26-22853 26 days |
| 31884 |
Thmoas-Guan author:Thmoas-Guan |
feat(RingTheory): definition of Gorenstein local ring |
In this PR, we gave basic definition of Gorenstein local ring and Gorestein ring and prove that they are stable under ring equiv.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41885
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
73/0 |
Mathlib.lean,Mathlib/RingTheory/Gorenstein/Defs.lean |
2 |
12 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
nobody |
4-15386 4 days ago |
15-49946 15 days ago |
15-52508 15 days |
| 42316 |
JovanGerb author:JovanGerb |
feat: use `max`/`min` for `union`/`intersection` in `Set`, `Finset`, `ZFSet`, `Class` |
This lets us write `∪`/`∩` for sets while the underlying constant is `max`/`min`. This is a follow-up to #32983, which made the same change for `⊆`, `⊂`, `⊇` and `⊃`. The implementation for `∪`/`∩` is analogous.
The first commit contains the implementation change, and all other commits are just adaptations.
Note that there are now two different special delaborators for `max`/`min`, because we already had the delaborator that chooses between `max`/`min` and `⊔`/`⊓`. It is important that the one for `∪`/`∩` is tried first. There is no priority mechanism for delaborators: they are always executed newest to oldest. So, this PR adds a (redundant) import to ensure that this order is respected.
- I modified the delaborator for `⊔`/`⊓` so that it doesn't fire if `LinearOrder` isn't imported. Due to the extra redundant import, that is now a more common situation and I think in that situation it's better to print `max a b` instead of `a ⊔ b`.
- It is now not anymore possible to write `simp [(· ∪ ·)]` due to elaboration issues. The same also already applied to `simp [(· ⊆ ·)]`.
- Many `simp` calls had to be fixed because the `simp` set for `max`/`min` contains more lemmas than what we had for `union`/`inter`. For example, `compl_inf` and `inf_of_le_left`/`inf_of_le_right` now also apply to intersections.
- In particular `inf_of_le_left`/`inf_of_le_right` are quite slow simp lemmas, which means that this PR gives a bit of slowdown.
- A `grind` call had to be fixed because it timed out. Originally, that `grind` call was already doing too much stuff, but it didn't quite reach its limits.
- Many `@[simp]` and some `@[gcongr]` tags could be removed because they are now subsumed by more general tags.
- I removed `@[mfld_simp]` from `inter_subset_left`, as it seemed a bit weird to have it there and not on its dual or its mirror lemma.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
329/413 |
Archive/Examples/Kuratowski.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/Lie/Basis/Prod.lean,Mathlib/Algebra/Module/SpanRank.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/AlgebraicGeometry/Morphisms/UniversallyClosed.lean,Mathlib/AlgebraicGeometry/Scheme.lean,Mathlib/AlgebraicGeometry/ZariskisMainTheorem.lean,Mathlib/AlgebraicTopology/SimplicialSet/AnodyneExtensions/RelativeCellComplex.lean,Mathlib/AlgebraicTopology/SimplicialSet/Degenerate.lean,Mathlib/Analysis/Convex/Combination.lean,Mathlib/Analysis/InnerProductSpace/Projection/FiniteDimensional.lean,Mathlib/Analysis/Seminorm.lean,Mathlib/Analysis/SpecialFunctions/Log/NegMulLog.lean,Mathlib/CategoryTheory/Limits/Types/Pushouts.lean,Mathlib/Combinatorics/Additive/Dissociation.lean,Mathlib/Combinatorics/Matroid/Basic.lean,Mathlib/Combinatorics/Matroid/Minor/Contract.lean,Mathlib/Combinatorics/Matroid/Minor/Order.lean,Mathlib/Combinatorics/SetFamily/Compression/UV.lean,Mathlib/Combinatorics/SetFamily/FourFunctions.lean,Mathlib/Combinatorics/SimpleGraph/AdjMatrix.lean,Mathlib/Combinatorics/SimpleGraph/LineGraph.lean,Mathlib/Combinatorics/SimpleGraph/UniversalVerts.lean,Mathlib/Computability/TuringMachine/ToPartrec.lean,Mathlib/Data/Finmap.lean,Mathlib/Data/Finset/Basic.lean,Mathlib/Data/Finset/BooleanAlgebra.lean,Mathlib/Data/Finset/Lattice/Basic.lean,Mathlib/Data/Finset/Lattice/Lemmas.lean,Mathlib/Data/Finset/SDiff.lean,Mathlib/Data/Finset/Sups.lean,Mathlib/Data/Finset/SymmDiff.lean,Mathlib/Data/Finsupp/BigOperators.lean,Mathlib/Data/Multiset/UnionInter.lean,Mathlib/Data/Set/Basic.lean,Mathlib/Data/Set/Defs.lean,Mathlib/Data/Set/Disjoint.lean,Mathlib/Data/Set/Function.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/Set/Insert.lean,Mathlib/Data/Set/Subset.lean,Mathlib/Geometry/Manifold/IsManifold/ExtChartAt.lean,Mathlib/Geometry/Manifold/MFDeriv/Defs.lean,Mathlib/GroupTheory/CosetCover.lean,Mathlib/GroupTheory/Perm/Finite.lean,Mathlib/GroupTheory/Perm/Support.lean,Mathlib/LinearAlgebra/AffineSpace/AffineSubspace/Defs.lean,Mathlib/LinearAlgebra/Basis/Exact.lean,Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean,Mathlib/Logic/Equiv/Set.lean,Mathlib/MeasureTheory/Covering/LiminfLimsup.lean,Mathlib/MeasureTheory/MeasurableSpace/CountablyGenerated.lean,Mathlib/MeasureTheory/Measure/Decomposition/Hahn.lean,Mathlib/MeasureTheory/Measure/Haar/Unique.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/Typeclasses/ZeroOne.lean,Mathlib/MeasureTheory/OuterMeasure/AE.lean,Mathlib/MeasureTheory/PiSystem.lean,Mathlib/MeasureTheory/SetSemiring.lean,Mathlib/MeasureTheory/VectorMeasure/Variation/Semivariation.lean,Mathlib/NumberTheory/LSeries/ZetaZeros.lean,Mathlib/NumberTheory/WellApproximable.lean,Mathlib/Order/Birkhoff.lean,Mathlib/Order/BooleanAlgebra/Set.lean,Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/Filter/Bases/Basic.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/Defs.lean,Mathlib/Order/Lattice.lean,Mathlib/Order/Lattice/Congruence.lean,Mathlib/Order/Notation.lean,Mathlib/Order/SupIndep.lean,Mathlib/RingTheory/PolynomialLaw/Basic.lean,Mathlib/RingTheory/RegularLocalRing/Polynomial.lean,Mathlib/SetTheory/ZFC/Basic.lean,Mathlib/SetTheory/ZFC/Class.lean,Mathlib/Tactic/SetNotationForOrder.lean,Mathlib/Topology/CWComplex/Classical/Basic.lean,Mathlib/Topology/Closure.lean,Mathlib/Topology/Compactification/StoneCech.lean,Mathlib/Topology/Connected/Clopen.lean,Mathlib/Topology/Constructible.lean,Mathlib/Topology/DiscreteSubset.lean,Mathlib/Topology/NhdsWithin.lean,Mathlib/Topology/OpenPartialHomeomorph/IsImage.lean,Mathlib/Topology/Sets/Compacts.lean,Mathlib/Topology/Sets/Opens.lean,Mathlib/Topology/UrysohnsLemma.lean,MathlibTest/Attribute/ToDual.lean,MathlibTest/Delab/SupInf.lean,MathlibTest/SetNotationForOrder.lean,MathlibTest/Simps.lean,MathlibTest/Tactic/GRewrite.lean,MathlibTest/Tactic/Order.lean |
97 |
8 |
['JovanGerb', 'github-actions', 'leanprover-radar', 'mathlib-merge-conflicts'] |
nobody |
4-11741 4 days ago |
4-22384 4 days ago |
4-38506 4 days |
| 39905 |
plp127 author:plp127 |
chore(Order/CompleteBooleanAlgebra): dualize `symmDiff` theorems |
Dualize some `symmDiff` theorems, and also generalize them from `CompleteBooleanAlgebra` to `Order.Coframe`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
76/39 |
Mathlib/Order/CompleteBooleanAlgebra.lean |
1 |
4 |
['JovanGerb', 'github-actions', 'plp127', 'vihdzp'] |
nobody |
4-9170 4 days ago |
72-65937 72 days ago |
72-65925 72 days |
| 42402 |
justus-springer author:justus-springer |
refactor(AlgebraicGeometry/Birational): phase out `Scheme.Over` for rational maps |
Split off from #40871
We refactor `PartialMap.IsOver` to not use `Scheme.Hom.IsOver`, which is being phased out. We still keep it as class with one field for now (as opposed to making it an abbrev for the morphism equation directly). This is because I think it's still useful to have instances for `PartialMap.restrict` and `PartialMap.toRationalMap`. However, some things which used to be instances (`isOver_comp` and `IsOver.compHom`) now need to be lemmas.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
tech debt
|
100/86 |
Mathlib/AlgebraicGeometry/Birational/Composition.lean,Mathlib/AlgebraicGeometry/Birational/RationalMap.lean |
2 |
1 |
['github-actions'] |
nobody |
4-7704 4 days ago |
4-20950 4 days ago |
4-20938 4 days |
| 41559 |
JovanGerb author:JovanGerb |
chore(Data/List/MinMax): use `to_dual` |
This PR uses `to_dual` to translate some theorems about maxima and minima on lists.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
61/179 |
Mathlib/Data/List/MinMax.lean,Mathlib/Tactic/ToDual.lean,Mathlib/Tactic/Translate/ToDual.lean |
3 |
1 |
['github-actions'] |
nobody |
4-6224 4 days ago |
28-56848 28 days ago |
28-56836 28 days |
| 41481 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Connectivity/Connected): a preconnected graph with finitely many edges has finitely many vertices |
`Finite V ↔ Finite G.Dart ↔ G.support.Finite ↔ G.edgeSet.Finite`
---
`#G.Dart = 2 * #G.edgeSet` is also true (#36406) which could simplify the `edgeSet` proof, but it's in `DegreeSum.lean` and more complicated. Having `Finite` theorems seems useful.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
|
79/1 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/Dart.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
4 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
4-5635 4 days ago |
4-6243 4 days ago |
16-49414 16 days |
| 40827 |
FrankieNC author:FrankieNC |
feat(MeasureTheory): coercion of a linear combination in Lp |
Adds `Lp.coeFn_linearCombination`: for finitely supported coefficients `c : ι →₀ 𝕜` and a family `f : ι → Lp E p μ`, the coercion of `Finsupp.linearCombination 𝕜 f c` is almost everywhere equal to `∑ i ∈ c.support, c i • ⇑(f i)`. |
t-measure-probability
brownian
|
4/0 |
Mathlib/MeasureTheory/Function/LpSpace/Basic.lean |
1 |
11 |
['CoolRmal', 'EtienneC30', 'FrankieNC', 'github-actions', 'j-loreaux'] |
RemyDegenne assignee:RemyDegenne |
4-5594 4 days ago |
4-6651 4 days ago |
47-32493 47 days |
| 42159 |
fbarroero author:fbarroero |
chore(NumberTheory/SiegelsLemma): simplify and golf proofs |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
37/74 |
Mathlib/NumberTheory/SiegelsLemma.lean |
1 |
6 |
['copilot-pull-request-reviewer', 'fbarroero', 'github-actions', 'leanprover-radar'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
4-4701 4 days ago |
10-76111 10 days ago |
10-76099 10 days |
| 39841 |
hawkrobe author:hawkrobe |
feat(RingTheory/HopfAlgebra): Construction on primitive elements |
Builds a Hopf algebra structure on a bialgebra generated by [primitive elements](https://github.com/leanprover-community/mathlib4/pull/31898#discussion_r2553181878).
---
Please let me know if it would be better to split into multiple PRs (e.g. `Bialgebra/Primitive.lean` first)!
* [x] depends on: #39785
|
t-ring-theory
new-contributor
|
392/0 |
Mathlib.lean,Mathlib/RingTheory/Bialgebra/Primitive.lean,Mathlib/RingTheory/Coalgebra/Primitive.lean,Mathlib/RingTheory/HopfAlgebra/Generators.lean,Mathlib/RingTheory/HopfAlgebra/Primitive.lean,docs/references.bib |
6 |
21 |
['YaelDillies', 'github-actions', 'hawkrobe', 'mathlib-bors', 'mathlib-merge-conflicts', 'themathqueen'] |
YaelDillies assignee:YaelDillies |
4-2834 4 days ago |
4-3659 4 days ago |
35-85537 35 days |
| 38855 |
SnirBroshi author:SnirBroshi |
feat(Order/ConditionallyCompleteLattice/Indexed): `≤` version of `ciSup_or'` for `ConditionallyCompleteLattice` |
Deprime `ciSup_or'` because there's no `ciSup_or`, and add a `≤` version (and dual) for `ConditionallyCompleteLattice`.
Only `≤` because equality does not hold when `p ≠ q` without `sSup ∅ = ⊥`.
---
`ciSup_or'` can't have a dual because there's no dual to `ConditionallyCompleteLinearOrderBot`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
9/2 |
Mathlib/Order/ConditionallyCompleteLattice/Finset.lean,Mathlib/Order/ConditionallyCompleteLattice/Indexed.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
bryangingechen assignee:bryangingechen |
4-1024 4 days ago |
4-4013 4 days ago |
85-71618 85 days |
| 41458 |
SnirBroshi author:SnirBroshi |
feat(Data/List/Basic): lists with equal `tail` and `dropLast` are equal |
(except for subsingleton lists), and also lists with equal `head?` and `tail`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
19/0 |
Mathlib/Data/List/Basic.lean |
1 |
4 |
['felixpernegger', 'github-actions'] |
nobody |
3-84849 3 days ago |
31-6143 31 days ago |
31-6131 31 days |
| 42411 |
SnirBroshi author:SnirBroshi |
feat(ModEq): `IsEquiv` instance |
`IsEquiv` for `Nat.ModEq`/`Int.ModEq`/`SModEq`
---
The deleted instances are synthesizable from the new ones.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
12/15 |
Mathlib/Data/Int/ModEq.lean,Mathlib/Data/Nat/ModEq.lean,Mathlib/LinearAlgebra/SModEq/Basic.lean |
3 |
1 |
['github-actions'] |
nobody |
3-83791 3 days ago |
3-85859 3 days ago |
3-85847 3 days |
| 41052 |
hawkrobe author:hawkrobe |
refactor(RingTheory/HopfAlgebra): relocate `ofSurjective` |
---
Cleanup after #39790, moves `HopfAlgebra.ofSurjective` to `HopfAlgebra/Convolution.lean` and extracts the convolution functoriality.
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
|
87/51 |
Mathlib/RingTheory/Bialgebra/Convolution.lean,Mathlib/RingTheory/Coalgebra/Convolution.lean,Mathlib/RingTheory/HopfAlgebra/Convolution.lean,Mathlib/RingTheory/HopfAlgebra/Quotient.lean |
4 |
11 |
['eric-wieser', 'github-actions', 'hawkrobe'] |
nobody |
3-83439 3 days ago |
14-17700 14 days ago |
42-18414 42 days |
| 42313 |
deancureton author:deancureton |
feat(RingTheory): embDomain composition and range, Laurent series expansion |
Add to the Hahn series API:
- `embDomain_embDomain` (composition of domain embeddings)
- `mem_range_embDomain_iff` (range of `embDomain` is characterized by support containment)
Add to the Laurent series API:
- the expansion ring endomorphism `LaurentSeries.expand` with its monomial and `orderTop` lemmas
- follows the pattern of `Polynomial.expand`, `MvPolynomial.expand`, `PowerSeries.expand`
- its opposite `LaurentSeries.contract`, with the decomposition of a Laurent series by exponent residues mod `n` (`sum_single_mul_expand_contract`) and its uniqueness (`contract_eq_of_sum_eq`)
- `exists_ofPowerSeries_eq_of_orderTop_nonneg`
This is the first of a series of PRs formalizing Puiseux series and Puiseux's theorem (entry 41 of Freek Wiedijk's 100 theorems list). |
t-ring-theory
new-contributor
LLM-generated
|
116/0 |
Mathlib/RingTheory/HahnSeries/Basic.lean,Mathlib/RingTheory/LaurentSeries.lean |
2 |
16 |
['deancureton', 'github-actions', 'wwylele'] |
nobody |
3-80488 3 days ago |
6-75566 6 days ago |
6-75554 6 days |
| 42414 |
FrankieNC author:FrankieNC |
feat(Analysis/Convex): convex functions are locally Lipschitz on the intrinsic interior |
Prove the four `proof_wanted` statements in `Mathlib/Analysis/Convex/Continuous.lean`: a convex (resp. concave) function on a set `C` in a finite-dimensional real normed space is locally Lipschitz, hence continuous, on `intrinsicInterior ℝ C` — the intrinsic analogues of the existing `ConvexOn.locallyLipschitzOn_interior` and `ConvexOn.continuousOn_interior`.
- `ConvexOn.locallyLipschitzOn_intrinsicInterior` and its concave, `ContinuousOn` companions
- `Isometry.locallyLipschitzOn_image`: if `h ∘ g` is locally Lipschitz on `s` for an isometry `g`, then `h` is locally Lipschitz on `g '' s` |
t-analysis |
41/12 |
Mathlib/Analysis/Convex/Continuous.lean |
1 |
1 |
['github-actions'] |
nobody |
3-80082 3 days ago |
3-80722 3 days ago |
3-80710 3 days |
| 27707 |
amellendijk author:amellendijk |
feat(NumberTheory/SelbergSieve): define Selberg's weights and prove basic results |
This PR continues the work from #23635.
Original PR: https://github.com/leanprover-community/mathlib4/pull/23635
- [x] depends on: #27702 |
t-number-theory
t-analysis
|
140/0 |
Mathlib/NumberTheory/Divisors.lean,Mathlib/NumberTheory/SelbergSieve.lean |
2 |
29 |
['MichaelStollBayreuth', 'amellendijk', 'github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot'] |
urkud assignee:urkud |
3-67877 3 days ago |
29-29281 29 days ago |
32-73996 32 days |
| 39075 |
Thmoas-Guan author:Thmoas-Guan |
feat(Algebra/CommRingCat): colimit of local ring via local hom |
In this PR, we deal with filtered colimit of local ring via local homomorphisms, proving it is
again local, with maximal ideal equal to the union of images of maximal ideals.
Further more, we proved their residue field is colimit too (in category of local ring, residue field functor preserve colimit).
Co-authored-by: Wang Jingting <wangjt2020@163.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
211/0 |
Mathlib.lean,Mathlib/Algebra/Category/Ring/FilteredColimitsLocal.lean |
2 |
3 |
['Thmoas-Guan', 'github-actions', 'riccardobrasca'] |
jjdishere assignee:jjdishere |
3-67877 3 days ago |
26-58080 26 days ago |
91-23018 91 days |
| 39799 |
NoahW314 author:NoahW314 |
chore(RingTheory/Ideal/Operations): deprecate duplicate theorem `Ideal.span_mul_span'` |
`Ideal.span_mul_span'` is identical to `Ideal.span_mul_span`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
At one point, `Ideal.span_mul_span` and `Ideal.span_mul_span'` were distinct, but `Ideal.span_mul_span` was changed in #22151 to be identical to `Ideal.span_mul_span'`. |
t-ring-theory |
6/7 |
Mathlib/RingTheory/GradedAlgebra/Homogeneous/Ideal.lean,Mathlib/RingTheory/Ideal/Norm/RelNorm.lean,Mathlib/RingTheory/Ideal/Operations.lean,scripts/nolints_prime_decls.txt |
4 |
2 |
['faenuccio', 'github-actions'] |
alreadydone assignee:alreadydone |
3-67876 3 days ago |
74-64746 74 days ago |
74-64734 74 days |
| 41085 |
chrisflav author:chrisflav |
feat(CategoryTheory): stalks of a presheaf on an indiscrete topological space |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
84/0 |
Mathlib/CategoryTheory/Limits/Shapes/Terminal.lean,Mathlib/Topology/Category/TopCat/OpenNhds.lean,Mathlib/Topology/Sheaves/Stalks.lean |
3 |
3 |
['chrisflav', 'github-actions', 'plp127'] |
joelriou assignee:joelriou |
3-67875 3 days ago |
41-83390 41 days ago |
41-84534 41 days |
| 41642 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Topology, Geometry and Analysis |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 20 file(s) in **Topology, Geometry and Analysis**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-differential-geometry
|
39/19 |
Mathlib/Geometry/Manifold/Algebra/SMul.lean,Mathlib/Geometry/Manifold/ContMDiff/Basic.lean,Mathlib/Geometry/Manifold/Instances/Quotient.lean,Mathlib/Topology/Algebra/Category/ProfiniteGrp/Basic.lean,Mathlib/Topology/Algebra/Group/DiscontinuousSubgroup.lean,Mathlib/Topology/Algebra/Group/OpenMapping.lean,Mathlib/Topology/Algebra/Group/Pointwise.lean,Mathlib/Topology/Algebra/Group/Quotient.lean,Mathlib/Topology/Algebra/InfiniteSum/Constructions.lean,Mathlib/Topology/Algebra/IsUniformGroup/DiscreteSubgroup.lean,Mathlib/Topology/Algebra/MulAction.lean,Mathlib/Topology/Algebra/Nonarchimedean/Basic.lean,Mathlib/Topology/Algebra/ProperAction/Basic.lean,Mathlib/Topology/Algebra/ProperAction/CompactlyGenerated.lean,Mathlib/Topology/Algebra/Support.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/Covering/Quotient.lean |
17 |
11 |
['adomani', 'github-actions', 'grunweg'] |
sgouezel assignee:sgouezel |
3-67874 3 days ago |
26-28266 26 days ago |
26-28254 26 days |
| 42042 |
ijtejeda author:ijtejeda |
feat(MeasureTheory/OuterMeasure): more API for outer measures |
Previously some desired basic API for outer measures regarding regularity notions was missing. Even though some of these notions were available in `MeasureTheory.Measure.Regular` for measures, these do not automatically translate to general outer measure conditions.
Add the following notions of regularity for outer measures: regular, Borel regular, Radon; as well as some basic lemmas about them and the definition of support of an outer measure.
AI usage: we use Claude to mimic proofs from the textbooks we use and partially assist some definitions and lemma statements.
References:
1. P. Mattila - Geometry of Sets and Measures in Euclidean Spaces
2. V.I. Bogachev - Measure Theory v.1
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
LLM-generated
new-contributor
t-measure-probability
|
143/1 |
Mathlib.lean,Mathlib/MeasureTheory/OuterMeasure/Caratheodory.lean,Mathlib/MeasureTheory/OuterMeasure/Regular.lean,README.md |
4 |
6 |
['github-actions', 'ijtejeda', 'tdwag123'] |
RemyDegenne assignee:RemyDegenne |
3-67873 3 days ago |
8-45752 8 days ago |
8-48664 8 days |
| 42165 |
bocowgill author:bocowgill |
feat(Probability/Independence): characterize independence using conditional distributions |
This PR uses conditional distributions to characterize independence of two random variables.
It adds the results below to `Mathlib/Probability/HasCondDistrib.lean`:
* `IndepFun.hasCondDistrib_const`: suppose that `P` is finite and that `X` and `Y` are a.e.-measurable. If `X` and `Y` are independent, then the constant kernel at the marginal distribution `P.map Y` is a conditional distribution of `Y` given `X`.
* `HasCondDistrib.indepFun_of_const`: conversely (assuming that `P` is finite), if the constant kernel at the marginal distribution `P.map Y` is a conditional distribution of `Y` given `X`, then `X` and `Y` are independent.
* `indepFun_iff_hasCondDistrib_const`: combines these implications into an equivalence (under the same finiteness and a.e.-measurability assumptions).
In addition, this PR also adds the new file `Mathlib/Probability/Independence/CondDistrib.lean`. The main theorem in this file, `indepFun_iff_condDistrib_ae_eq_const`, states that (assuming that `P` is finite) for a.e.-measurable random variables `X` and `Y`, with `Y` taking values in a nonempty standard Borel space, `X` and `Y` are independent if and only if the conditional distribution of `Y` given `X` is equal, `P.map X`-almost everywhere, to the constant kernel at the marginal distribution `P.map Y`. The new file is also added to the root `Mathlib.lean` imports.
---
### Motivation
These results provide a basic building block for formalizing randomized experiments and causal identification. The main result provides a starting point for later ignorability and conditional-independence results in causal inference.
### LLM disclosure
For theorem planning and Lean implementation, I substantially used Codex by OpenAI. I also used it for suggestions around naming and documentation, for iterating on the proofs, and for validating my commits locally.
I manually searched for the best locations and earlier results to build upon. I personally reviewed both the mathematical statements and Lean code (line-by-line), as well as the suggestions around naming and API choices. I also reviewed and confirmed that I can explain each step of the results (both Mathematics and Lean syntax).
To validate the change, I directly compiled the modified file and ran a targeted build. I also ran the style linter, and completed a full `lake build` and a full `lake test`.
Please note: This is one of my first mathlib contributions. I welcome corrections or suggestions about all aspects of this PR. I'm prepared to revise it as necessary, and to learn from the review. |
t-measure-probability
LLM-generated
new-contributor
|
72/0 |
Mathlib.lean,Mathlib/Probability/HasCondDistrib.lean,Mathlib/Probability/Independence/CondDistrib.lean |
3 |
3 |
['bocowgill', 'github-actions'] |
kex-y assignee:kex-y |
3-67871 3 days ago |
10-57007 10 days ago |
10-56995 10 days |
| 42400 |
JovanGerb author:JovanGerb |
feat(Translate): improve error message when translation fails |
This PR improves the error message `to_additive`/`to_dual` gives when the translation fails. In particular, it was previously possible to get a kernel error when the value itself was type correct, but it didn't match with the translated type.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta |
81/8 |
Mathlib/Tactic/Translate/Core.lean,MathlibTest/Attribute/ToAdditive/Basic.lean |
2 |
1 |
['github-actions'] |
thorimur assignee:thorimur |
3-67869 3 days ago |
4-31229 4 days ago |
4-31217 4 days |
| 41799 |
FrankieNC author:FrankieNC |
feat(Topology/MetricSpace): differentiable maps do not increase Hausdorff dimension |
Add the Luzin N property of differentiable maps and deduce that differentiable maps do not increase Hausdorff dimension, over any nontrivially normed field with no finite-dimensionality or separability assumptions:
- `MeasureTheory.Measure.isSeparable_of_hausdorffMeasure_ne_top`: a set with `μH[d] s ≠ ∞` is separable
- `DifferentiableOn.hausdorffMeasure_image_eq_zero`: if `f` is differentiable on `t` and `μH[d] t = 0` for some `0 ≤ d`, then `μH[d] (f '' t) = 0`
- `DifferentiableOn.dimH_image_le`: `dimH (f '' t) ≤ dimH t`, as a corollary of the Luzin N property
- `Differentiable.dimH_range_le`, `DifferentiableOn.dense_compl_image_of_dimH_lt_finrank`, `Differentiable.dense_compl_range_of_finrank_lt_finrank`: differentiable versions of the Sard-type corollaries; `dense_compl_of_dimH_lt_finrank` and these corollaries also drop `FiniteDimensional` instance assumptions that already follow from their hypotheses
This resolves the TODO on `ContDiffOn.dimH_image_le`: the `Convex ℝ s` hypothesis is not needed. The four `ContDiff`/`ContDiffOn` lemmas (`ContDiffOn.dimH_image_le`, `ContDiff.dimH_range_le`, `ContDiffOn.dense_compl_image_of_dimH_lt_finrank`, `ContDiff.dense_compl_range_of_finrank_lt_finrank`) are deprecated in favour of the `Differentiable` versions. |
t-topology
maintainer-merge
|
103/28 |
Mathlib/MeasureTheory/Measure/Hausdorff.lean,Mathlib/Topology/MetricSpace/HausdorffDimension.lean |
2 |
18 |
['CoolRmal', 'FrankieNC', 'github-actions'] |
CoolRmal assignee:CoolRmal |
3-67208 3 days ago |
4-31790 4 days ago |
21-67110 21 days |
| 41198 |
Raph-DG author:Raph-DG |
feat(AlgebraicGeometry): degree of a zero-cycle |
In this PR, we define the degree of a zero-cycle as in https://stacks.math.columbia.edu/tag/0AZ0
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
large-import
|
107/2 |
Mathlib/AlgebraicGeometry/AlgebraicCycle/Basic.lean,Mathlib/AlgebraicGeometry/ResidueField.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
13 |
['Raph-DG', 'github-actions', 'joelriou'] |
nobody |
3-66973 3 days ago |
31-41525 31 days ago |
34-25794 34 days |
| 41428 |
chrisflav author:chrisflav |
feat(Algebra/Category/ModuleCat): submodules of sheaves of modules |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
LLM-generated
|
148/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Submodule.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Submodule.lean,Mathlib/CategoryTheory/Sites/Whiskering.lean |
4 |
2 |
['chrisflav', 'github-actions'] |
nobody |
3-66972 3 days ago |
31-78665 31 days ago |
31-78691 31 days |
| 41484 |
FernandoChu author:FernandoChu |
feat(CategoryTheory): kan extensions from isos |
This PR constructs lifts out of isomorphisms of 1-cells, and shows that being (abs) Kan is preserved by this. This is done for all four notions of left/right lifts/extensions.
This is needed for the oo-cosmos project.
----
**AI disclosure**. Claude was used in defining the API for the left extension case. After manually fixing its bad proofs/definitions/docstrings, Claude was later asked to replicate this for the other three cases, which I again finetuned. |
t-category-theory
LLM-generated
large-import
|
330/3 |
Mathlib/CategoryTheory/Bicategory/Extension.lean,Mathlib/CategoryTheory/Bicategory/Kan/IsKan.lean |
2 |
3 |
['FernandoChu', 'github-actions', 'grunweg'] |
nobody |
3-66971 3 days ago |
30-38917 30 days ago |
30-38905 30 days |
| 42413 |
SnirBroshi author:SnirBroshi |
feat(Order/Cover): `CovBy` is asymmetric and `WCovBy` is antisymmetric |
---
The deleted instances are synthesizable from the new ones.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
10/5 |
Mathlib/Order/Cover.lean |
1 |
1 |
['github-actions'] |
nobody |
3-66361 3 days ago |
3-84074 3 days ago |
3-84062 3 days |
| 42350 |
sankalpsthakur author:sankalpsthakur |
feat(Computability): characterize halted TM1 configurations |
Adds `Turing.TM1.step_none_iff`, characterizing exactly when a single TM1 step returns `none`: iff the configuration's current label is already `none`. Tagged `@[simp]`.
Motivated by #35366.
### Validation
Built locally: `lake build Mathlib.Computability.TuringMachine.PostTuringMachine` — succeeds (688 jobs, cache-backed).
Closes #35366
### AI/LLM disclosure
AI coding tools were used to help draft this change and PR description. I reviewed the complete change, understand the reasoning, and verified the build locally before submitting. |
t-computability
new-contributor
LLM-generated
|
5/0 |
Mathlib/Computability/TuringMachine/PostTuringMachine.lean |
1 |
2 |
['github-actions'] |
nobody |
3-62674 3 days ago |
3-63265 3 days ago |
4-60830 4 days |
| 42352 |
sankalpsthakur author:sankalpsthakur |
feat(RingTheory): coprimality of a sum and difference |
Adds `Int.isCoprime_add_sub`: if `m, n` are coprime and `m + n` is odd (equivalently, `m, n` have opposite parity), then `m + n` and `m - n` are coprime.
Motivated by #37366.
### Validation
Built locally: `lake build Mathlib.RingTheory.Int.Basic` — succeeds.
Closes #37366
### AI/LLM disclosure
AI coding tools were used to help draft this change and PR description. I reviewed the complete change, understand the reasoning, and verified the build locally before submitting. |
t-ring-theory
new-contributor
|
9/0 |
Mathlib/RingTheory/Int/Basic.lean |
1 |
4 |
['SnirBroshi', 'github-actions', 'sankalpsthakur'] |
nobody |
3-62445 3 days ago |
5-72621 5 days ago |
5-72609 5 days |
| 42354 |
sankalpsthakur author:sankalpsthakur |
doc(Data/Rel): clarify the SetRel representation |
Rewrites the implementation-notes section explaining why `SetRel` represents relations as `Set (α × β)` rather than `α → β → Prop`. The previous text framed the two representations as competing, with the function form as default and `SetRel` mainly justified by dedicated notation. This reframes it around what each representation is *for*: the function form when a relation is primarily applied to arguments, the set-of-pairs form when the relation itself is manipulated as an object — with concrete examples (inverse as preimage, transport as image, union/intersection/complement/subset-order inherited from `Set`). Also fixes a stray double space.
Motivated by #39397.
### Validation
Documentation-only change (module docstring); no executable code touched.
Closes #39397
### AI/LLM disclosure
AI coding tools were used to help draft this change and PR description. I reviewed the complete change and the reasoning before submitting. |
t-data
new-contributor
LLM-generated
|
16/13 |
Mathlib/Data/Rel.lean |
1 |
3 |
['github-actions'] |
nobody |
3-61327 3 days ago |
5-72603 5 days ago |
5-72591 5 days |
| 42356 |
sankalpsthakur author:sankalpsthakur |
fix(Tactic/Lift): preserve abbreviated target types |
`lift n to MyNat using hn` where `MyNat` is an `abbrev` could produce a proof term whose displayed/elaborated type unfolds the abbreviation to its underlying type, losing the connection to `MyNat`-specific declarations (e.g. a subsequent call to a `MyNat`-namespaced lemma would fail to resolve).
Wraps the synthesized proof term in an explicit `show ∃ _ : $t, _ from …` ascription using the originally-written target syntax `t`, so the abbreviation is preserved rather than unfolded.
Closes #15865.
-------
### Validation
- Built locally: `lake build Mathlib.Tactic.Lift` and `lake build MathlibTest.Tactic.Lift` — both succeed, including the new regression test (lifting to an `abbrev`-defined `MyNat` and calling a `MyNat`-namespaced lemma on the result).
- Scope note: `lift` is used in roughly 241 files across Mathlib. I verified the tactic's own implementation and its dedicated test suite build cleanly, but did not rebuild the full library to check every existing call site — the ascription should be semantically transparent (same term, explicit type), but I'm relying on CI for full-library confirmation rather than claiming that coverage myself.
### AI/LLM disclosure
AI coding tools were used to help draft this change and PR description. I reviewed the complete change, understand the reasoning, and verified the build locally before submitting. |
t-meta
new-contributor
LLM-generated
|
17/2 |
Mathlib/Tactic/Lift.lean,MathlibTest/Tactic/Lift.lean |
2 |
2 |
['github-actions'] |
thorimur assignee:thorimur |
3-60417 3 days ago |
5-72590 5 days ago |
5-72578 5 days |
| 42225 |
matt-w-horn author:matt-w-horn |
feat(Order): Knaster–Tarski fixed points on an interval |
`lfpIcc f a b` and `gfpIcc f a b`: least and greatest fixed points of `f` on `Set.Icc a b` in a conditionally complete lattice, for `f` monotone on the interval and mapping it into itself. Also interval membership, endpoint-iterate bounds, and monotonicity in `f`.
`OrderHom.lfp` gives this through the complete-lattice instance on the subtype, but wants a `Fact (a ≤ b)` and returns subtype elements. These take `MonotoneOn` and `MapsTo` directly and stay in `α`. Bridge lemmas between the two are a follow-up.
Used on intervals of ℝ in Overload, a sorry-free Lean library on retry and overload dynamics: https://github.com/matt-w-horn/overload/tree/main/Overload
Claude Fable wrote the Lean from a spec I gave it. I reviewed and tested it myself, including adversarial tests and the suites in the library above, and did the same for its dependencies.
Assisted-by: Claude Fable 5 |
t-order
new-contributor
LLM-generated
|
168/0 |
Mathlib.lean,Mathlib/Order/FixedPointsIcc.lean |
2 |
7 |
['github-actions', 'matt-w-horn', 'wwylele'] |
nobody |
3-57243 3 days ago |
4-66829 4 days ago |
4-66817 4 days |
| 42224 |
matt-w-horn author:matt-w-horn |
doc: sync area READMEs with the directory tree |
These four README topic lists are out of date.
`Order/README.md` was missing `Order.ConditionallyCompletePartialOrder`, which sits between `CompleteLattice` and `ConditionallyCompleteLattice` in the import chain. The three convex ones were missing files that have been added since.
No Lean changes.
Claude Fable checked the READMEs against the directory tree and suggested the additions; I made the edits.
Assisted-by: Claude Fable 5 |
easy
new-contributor
LLM-generated
t-convex-geometry
|
8/0 |
Mathlib/Analysis/Convex/Cone/README.md,Mathlib/Geometry/Convex/Cone/README.md,Mathlib/Geometry/Convex/README.md,Mathlib/Order/README.md |
4 |
15 |
['YaelDillies', 'github-actions', 'mathlib-bors', 'matt-w-horn'] |
YaelDillies assignee:YaelDillies |
3-57147 3 days ago |
4-75790 4 days ago |
7-11006 7 days |
| 42425 |
mcdoll author:mcdoll |
chore(LinearAlgebra/LinearPMap): change lemma to use `LinearMap.range` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
5/5 |
Mathlib/LinearAlgebra/LinearPMap.lean |
1 |
1 |
['github-actions'] |
nobody |
3-54403 3 days ago |
3-56081 3 days ago |
3-56069 3 days |
| 41656 |
joelriou author:joelriou |
feat(AlgebraicTopology): order relation between simplices of the nerve of a partial order |
This is applied to the characterization of the order relation between simplices of `Δ[p] ⊗ Δ[q]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
maintainer-merge
|
64/2 |
Mathlib/AlgebraicTopology/SimplicialSet/NerveNondegenerate.lean,Mathlib/AlgebraicTopology/SimplicialSet/ProdStdSimplex.lean,Mathlib/AlgebraicTopology/SimplicialSet/Subcomplex.lean |
3 |
6 |
['github-actions', 'joelriou', 'robin-carlier'] |
nobody |
3-48303 3 days ago |
22-27257 22 days ago |
25-42472 25 days |
| 42396 |
joelriou author:joelriou |
feat(CategoryTheory): properties of objects that are closed under finite limits |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
63/8 |
Mathlib.lean,Mathlib/CategoryTheory/ObjectProperty/FiniteLimits.lean,Mathlib/CategoryTheory/ObjectProperty/LimitsOfShape.lean |
3 |
4 |
['faenuccio', 'github-actions', 'joelriou', 'robin-carlier'] |
nobody |
3-46896 3 days ago |
4-50976 4 days ago |
4-50964 4 days |
| 42418 |
FrankieNC author:FrankieNC |
chore(Data/Finset/Prod): state `singleton_product`/`product_singleton` via `sectR`/`sectL` |
The embeddings in the statements of `Finset.singleton_product` and `Finset.product_singleton` are `Function.Embedding.sectR`/`sectL` written out as anonymous constructors. Restate them via the named embeddings (the statements are definitionally unchanged), so call sites can rewrite with the `sectR_apply`/`sectL_apply` simp lemmas instead of `Embedding.coeFn_mk`. Update the two call sites that did the latter, and golf `singleton_product_singleton`, which is now `rfl`.
Preparation for a follow-up PR replacing the `aesop` proofs of the `{Icc,Ico,Ioc,Ioo,uIcc}_map_{sectL,sectR}` lemmas in `Order/Interval/Finset/Basic`.
|
t-topology
easy
maintainer-merge
|
5/8 |
Mathlib/Analysis/Fourier/FourierTransformDeriv.lean,Mathlib/Data/Finset/Prod.lean,Mathlib/Topology/EMetricSpace/PairReduction.lean |
3 |
2 |
['github-actions', 'grunweg'] |
nobody |
3-39369 3 days ago |
3-72103 3 days ago |
3-72091 3 days |
| 42377 |
norbsvr author:norbsvr |
doc(1000.yaml): add Brauer's theorem on induced characters |
Claims a proof of [Q4958218:](https://www.wikidata.org/wiki/Q4958218) Brauer's theorem on induced characters.
The formalization is in an <a href="https://github.com/norbsvr/BrauerInduction/">external Lean 4 repository</a>. Please see file `README.md` for further information.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
3/0 |
docs/1000.yaml |
1 |
3 |
['github-actions'] |
nobody |
3-35490 3 days ago |
5-1338 5 days ago |
5-1326 5 days |
| 41618 |
joelriou author:joelriou |
chore(Order/Relseries): cleaning up a proof |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
14/45 |
Mathlib/Order/RelSeries.lean |
1 |
3 |
['Whysoserioushah', 'chenson2018', 'github-actions'] |
nobody |
3-35347 3 days ago |
26-20042 26 days ago |
27-25074 27 days |
| 36418 |
j-loreaux author:j-loreaux |
feat: add `IsMulCommutative` instances for topological closures of subobjects |
---
- [ ] depends on: #36549
- [ ] depends on: #36552
- [ ] depends on: #36553
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
t-algebra
label:t-algebra$ |
177/72 |
Mathlib/Analysis/CStarAlgebra/Classes.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Basic.lean,Mathlib/Analysis/CStarAlgebra/GelfandDuality.lean,Mathlib/Topology/Algebra/Algebra.lean,Mathlib/Topology/Algebra/Group/Basic.lean,Mathlib/Topology/Algebra/Monoid.lean,Mathlib/Topology/Algebra/NonUnitalAlgebra.lean,Mathlib/Topology/Algebra/NonUnitalStarAlgebra.lean,Mathlib/Topology/Algebra/Ring/Basic.lean,Mathlib/Topology/Algebra/StarSubalgebra.lean |
10 |
31 |
['github-actions', 'j-loreaux', 'leanprover-radar', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'themathqueen'] |
ocfnash assignee:ocfnash |
3-34351 3 days ago |
3-82347 3 days ago |
14-62735 14 days |
| 41498 |
pepamontero author:pepamontero |
feat(Analysis/SpecificLimits/Normed): the sum ∑' n, n ^ k * r ^ n via Stirling numbers |
For `‖r‖ < 1`, compute `∑' n : ℕ, n ^ k * r ^ n` as the finite sum `∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j / (1 - r) ^ (j + 1)`, where `S(k, j)` are the Stirling numbers of the second kind.
**Motivation:** a special case of `tsum_sq_mul_geometric_of_norm_lt_one` over `ℂ` was proved in the FLT project and is generalized here to match the surrounding Mathlib API; the private FLT lemma can then be replaced by this one.
**Main additions to `Normed.lean`:**
- The general power formula:
- `hasSum_pow_mul_geometric_of_norm_lt_one'` / `tsum_pow_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n ^ k * r ^ n = ∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_pow_mul_geometric_of_norm_lt_one` / `tsum_pow_mul_geometric_of_norm_lt_one`: the same in a field, with `/ (1 - r) ^ (j + 1)`.
- The `descFactorial` special case that supplies each term of that sum:
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one'` / `tsum_descFactorial_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n.descFactorial j * r ^ n = j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one` / `tsum_descFactorial_mul_geometric_of_norm_lt_one`: the field versions, with `/ (1 - r) ^ (j + 1)`.
**Additions to other files:**
- `Combinatorics/Enumerative/Stirling.lean`: `Nat.pow_eq_sum_stirlingSecond_mul_descFactorial`, expressing every power `n ^ k` as a linear combination `n ^ k = ∑ j ∈ range (k + 1), stirlingSecond k j * n.descFactorial j`.
- `Data/Nat/Factorial/Basic.lean`: `Nat.descFactorial_mul_self`, the identity `n.descFactorial j * n = n.descFactorial (j + 1) + j * n.descFactorial j`, used in the induction proving the Stirling result above.
**Other changes:**
- `summable_pow_mul_geometric_of_norm_lt_one` (statement unchanged) is now a one-line consequence of the general formula; its previous proof via `ascPochhammer` is deleted, so the `RingTheory.Polynomial.Pochhammer` import is no longer needed.
- The statement of `summable_descFactorial_mul_geometric_of_norm_lt_one` changes from the shifted summand `(n + k).descFactorial k * r ^ n` to `n.descFactorial k * r ^ n`, to match the new `hasSum`/`tsum` lemmas. It had no other uses in Mathlib, and the shifted form is recoverable in one line from `summable_choose_mul_geometric_of_norm_lt_one`.
- The proof of `hasSum_coe_mul_geometric_of_norm_lt_one'` (`k = 1`) is simplified using the general formula, and the `k = 2` case is added: `∑' n, n ^ 2 * r ^ n = r * (1 + r) / (1 - r) ^ 3` (`hasSum_sq_mul_geometric_of_norm_lt_one'` and the three companion lemmas).
- The redundant imports mentioned above have now been removed; this required import edits in 8 dependent files that had relied on them transitively.
**AI Disclosure**: this code originated in the FLT project, where an initial version was written by William Coram and Samuel Yin with AI assistance (Claude, later cleaned up with Codex). It has since been substantially rewritten for this PR; little of the original generated code remains.
Co-authored-by: Malhar A. Patel <142735852+Mal-Pat@users.noreply.github.com>
Co-authored-by: William Coram
Co-authored-by: Samuel Yin
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
t-analysis
maintainer-merge
|
195/83 |
Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/SpecialFunctions/OrdinaryHypergeometric.lean,Mathlib/Analysis/SpecialFunctions/Pochhammer.lean,Mathlib/Analysis/SpecialFunctions/PolynomialExp.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Basic.lean,Mathlib/Analysis/SpecificLimits/Normed.lean,Mathlib/Combinatorics/Enumerative/Stirling.lean,Mathlib/Data/Nat/Factorial/Basic.lean,Mathlib/InformationTheory/Coding/KraftMcMillan.lean,Mathlib/Topology/Instances/CantorSet.lean |
11 |
34 |
['Mal-Pat', 'YaelDillies', 'github-actions', 'grunweg', 'pepamontero'] |
nobody |
3-31450 3 days ago |
21-82888 21 days ago |
27-19426 27 days |
| 42315 |
sfingali author:sfingali |
feat(Topology): the adic spectrum Spa(A, A+) as a topological space |
### Summary
Defines the adic spectrum `Spa(A, A⁺)` as a set and topological space for a
topological ring `A` and a subring `A⁺` (Wedhorn, *Adic Spaces*,
arXiv:1910.05934, Def. 7.23 and Def. 7.29, pp. 62–63).
* `SpaPoint A A⁺` — a point of the adic spectrum: a continuous valuation
`v : A → Γ₀` with `v(f) ≤ 1` for all `f ∈ A⁺`.
* `SpaPoint.rationalSubset s T` — the rational subset `R(T/s)`.
* `SpaPoint.spaTopologicalSpace` — the topology generated by the rational
subsets with `T · A` open in `A`; `isOpen_rationalSubset` shows every such
rational subset is open.
* `SpaPoint.mem_rationalSubset_one` — Wedhorn, Rem. 7.30(4): `R(f/1)` is the
set `{x | |f(x)| ≤ 1}`.
Third step of an adic/perfectoid pipeline (Huber rings #42312 → continuous
valuations #42314 → Spa → Huber pairs → perfectoid → tilting). This PR works
with the element-level notion (a bundled continuous valuation with a fixed
value group); Wedhorn defines `Spa(A, A⁺)` as a subspace of the valuation
spectrum `Spv(A)` — the comparison is added once the spectrum PR lands.
### References
* T. Wedhorn, *Adic Spaces*, arXiv:1910.05934, Def. 7.23, Def. 7.29,
Rem. 7.30 (pp. 62–63).
|
new-contributor |
411/0 |
Mathlib.lean,Mathlib/RingTheory/Valuation/ContinuousValuation.lean,Mathlib/Topology/Algebra/Nonarchimedean/Spa.lean |
3 |
3 |
['github-actions', 'tb65536'] |
nobody |
3-25953 3 days ago |
5-9943 5 days ago |
5-13925 5 days |
| 40975 |
bwangpj author:bwangpj |
feat(LinearAlgebra): complex structures on real vector spaces |
Define complex structures,i .e. an `ℝ`-linear endomorphism `J` of a real vector space `V` with `J * J = -1`. |
t-algebra label:t-algebra$ |
93/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Complex/Structure.lean |
2 |
5 |
['bwangpj', 'github-actions', 'grunweg', 'themathqueen', 'wwylele'] |
nobody |
3-22252 3 days ago |
44-76843 44 days ago |
44-76831 44 days |
| 42439 |
xroblot author:xroblot |
feat(Algebra/QuadraticAlgebra): injectivity and surjectivity of `lift` |
Add API for the algebra map `QuadraticAlgebra.lift`:
* `range_lift`: its range is the subalgebra generated by `u`;
* `lift_surjective_iff`: surjective iff `u` generates the algebra;
* `lift_injective_iff`: injective iff `1` and `u` are linearly independent.
Also add the basis decomposition `re_smul_add_im_smul` (used to golf `algHom_ext`)
and `adjoin_omega_eq_top`. |
t-algebra
tech debt
label:t-algebra$ |
39/3 |
Mathlib/Algebra/QuadraticAlgebra/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
3-22211 3 days ago |
3-22820 3 days ago |
3-22808 3 days |
| 42408 |
fbarroero author:fbarroero |
chore(Algebra/Order/Ring/IsNonarchimedean): remove FunLike hypotheses and generalize statements |
This PR generalizes the `IsNonarchimedean` API from `FunLike` maps to arbitrary functions `f : α → R`, replacing bundled typeclass assumptions with explicit hypotheses.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
227/196 |
Mathlib/Algebra/Order/Hom/Basic.lean,Mathlib/Algebra/Order/Ring/IsNonarchimedean.lean,Mathlib/Analysis/Normed/Unbundled/FiniteExtension.lean,Mathlib/Analysis/Normed/Unbundled/RingSeminorm.lean,Mathlib/Analysis/Normed/Unbundled/SpectralNorm.lean,Mathlib/NumberTheory/Height/NumberField.lean,Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean,Mathlib/NumberTheory/Padics/PadicNorm.lean,Mathlib/RingTheory/MvPowerSeries/GaussNorm.lean,Mathlib/RingTheory/Polynomial/GaussNorm.lean |
10 |
11 |
['WilliamCoram', 'copilot-pull-request-reviewer', 'fbarroero', 'github-actions', 'leanprover-radar', 'riccardobrasca'] |
nobody |
3-22084 3 days ago |
3-29721 3 days ago |
3-29722 3 days |
| 42187 |
alreadydone author:alreadydone |
chore(Polynomial/GaussLemma): generalize dvd lemmas |
Only the divisor needs to be monic, and integral closedness isn't used.
---
#find_home returns:
[Mathlib.Algebra.Polynomial.PartialFractions, Mathlib.Algebra.Polynomial.Roots, Mathlib.RingTheory.FractionalIdeal.Operations, Mathlib.RingTheory.IntegralClosure.IsIntegral.AlmostIntegral],
none of which seems better than the current file.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
easy
label:t-algebra$ |
7/14 |
Mathlib/RingTheory/Polynomial/GaussLemma.lean |
1 |
3 |
['bocowgill', 'github-actions'] |
nobody |
3-19112 3 days ago |
10-20915 10 days ago |
10-20975 10 days |
| 42405 |
FrankieNC author:FrankieNC |
perf(Data/Rel): replace aesop proofs with explicit proofs |
Replace all 56 `aesop` calls with explicit proofs. Proofs only; no statement changes.
See benchmark results below.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
171/74 |
Mathlib/Data/Rel.lean |
1 |
14 |
['FrankieNC', 'chenson2018', 'github-actions', 'leanprover-radar'] |
nobody |
3-16666 3 days ago |
3-18708 3 days ago |
4-8775 4 days |
| 42289 |
grunweg author:grunweg |
refactor: add a separate delaborator for TotalSpace.mk' |
This allows removing the special-casing of the T% syntax in the differential geometry custom delaborators, massively reducing code duplication: the same code was repeated eight times (and #41005 would have added another four copies).
A secondary motivation is that the current delaborator code has a bug, and fixing this once is much better than doing so eight or twelve times. (This will happen in a follow-up.)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
78/146 |
Mathlib/Geometry/Manifold/Notation.lean,MathlibTest/DifferentialGeometry/Notation/Basic.lean |
2 |
24 |
['JovanGerb', 'github-actions', 'grunweg', 'thorimur'] |
nobody |
3-15663 3 days ago |
7-34085 7 days ago |
7-74003 7 days |
| 42421 |
SnirBroshi author:SnirBroshi |
feat(Order/CompactlyGenerated/Basic): the supremum of compact elements is compact and other basics |
- `⊥` is compact
- `⊔` of compacts is compact
- `WellFoundedGT` implies that every element is compact
- Generalize `IsCompactlyGenerated` to use `IsLUB`, like `IsCompactElement` & `IsAtomistic`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
84/34 |
Mathlib/Algebra/Lie/Submodule.lean,Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean,Mathlib/LinearAlgebra/Span/Basic.lean,Mathlib/Order/CompactlyGenerated/Basic.lean,Mathlib/Order/CompactlyGenerated/Intervals.lean |
5 |
1 |
['github-actions'] |
nobody |
3-15138 3 days ago |
3-19361 3 days ago |
3-22304 3 days |
| 42429 |
vlad902 author:vlad902 |
feat(LocalRing): trivial generalization of RingEquiv.isLocalRing to non-commutative semirings |
Currently `RingEquiv.isLocalRing` is stated only for the case when one of the rings is commutative, but generalizing it to non-commutative rings only involves generalizing type classes.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
4/8 |
Mathlib/RingTheory/LocalRing/Basic.lean,Mathlib/RingTheory/LocalRing/RingHom/Basic.lean |
2 |
1 |
['Whysoserioushah', 'github-actions'] |
nobody |
3-14913 3 days ago |
3-16477 3 days ago |
3-17506 3 days |
| 42442 |
vlad902 author:vlad902 |
doc(MetricSpace): fix docstring for `Dist` class |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
1/1 |
Mathlib/Topology/MetricSpace/Pseudo/Defs.lean |
1 |
1 |
['github-actions'] |
nobody |
3-14577 3 days ago |
3-16215 3 days ago |
3-16203 3 days |
| 42415 |
j-loreaux author:j-loreaux |
feat: generalize type class assumptions for `PositiveLinearMap.preGNS` and prove the Cauchy-Schwarz lemma |
In particular, we show:
```lean
lemma norm_map_star_mul_le (f : A →ₚ[ℂ] ℂ) (x y : A) :
‖f (star x * y)‖ ≤ √‖f (star x * x)‖ * √‖f (star y * y)‖
```
for `A` a non-unital star-ordered `ℂ`-algebra (and we create an alias `cauchy_schwarz_star_mul` for discoverability). The generalization away from C⋆-algebras allows this material to be used for type synonyms of C⋆-algebras with alternative topologies.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
maintainer-merge
|
48/3 |
Mathlib/Analysis/CStarAlgebra/GelfandNaimarkSegal.lean |
1 |
9 |
['github-actions', 'j-loreaux', 'themathqueen'] |
nobody |
3-11024 3 days ago |
3-15686 3 days ago |
3-77346 3 days |
| 37956 |
artie2000 author:artie2000 |
feat(Algebra/Polynomial): lemmas about polynomial degree |
* Add various small lemmas for computing polynomial degree
* Change a `hint` test to be slightly "harder" since `simp` gets more powerful
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
23/5 |
Mathlib/Algebra/Polynomial/Degree/Defs.lean,Mathlib/Algebra/Polynomial/Degree/Operations.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/Algebra/Polynomial/Monic.lean,MathlibTest/Tactic/Hint/All.lean |
5 |
10 |
['artie2000', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
kim-em assignee:kim-em |
3-10942 3 days ago |
3-13687 3 days ago |
46-56890 46 days |
| 42428 |
mo271 author:mo271 |
feat(Algebra/Polynomial/HasseDeriv): add `hasseDeriv_map` |
This is from Formal Conjecture's ForMathlib:
originally added by @shamEiNew in
https://github.com/google-deepmind/formal-conjectures/pull/150
This is analogous to `Polynomial.derivative_map` for the standard derivative.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
6/0 |
Mathlib/Algebra/Polynomial/HasseDeriv.lean |
1 |
2 |
['github-actions', 'mo271'] |
nobody |
3-10810 3 days ago |
3-12037 3 days ago |
3-45291 3 days |
| 42438 |
Garmelon author:Garmelon |
chore: bench linters even if they fail |
Previously, a !bench run would abort as soon as some linters failed. Now, it continues and measures the linters regardless of whether they accept the code.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
CI |
22/9 |
scripts/bench/lint/run,scripts/bench/measure.py |
2 |
3 |
['Garmelon', 'github-actions', 'leanprover-radar'] |
nobody |
3-10619 3 days ago |
3-22014 3 days ago |
3-22073 3 days |
| 42156 |
tb65536 author:tb65536 |
doc(Algebra/Module/ZLattice/Basic): fix `ZLattice.comap` docstring |
The linear map in the `ZLattice.comap` docstring was the wrong way around.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
documentation
easy
maintainer-merge
label:t-algebra$ |
5/5 |
Mathlib/Algebra/Module/ZLattice/Basic.lean |
1 |
3 |
['github-actions', 'joneugster', 'plp127'] |
joneugster assignee:joneugster |
3-10029 3 days ago |
10-83572 10 days ago |
10-83562 10 days |
| 42105 |
vlad902 author:vlad902 |
feat(Algebra): `center` map lemmas |
Plumb lemmas showing surjective homs/isos map centers to centers throughout the algebra hierarchy.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
182/25 |
Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Group/Center.lean,Mathlib/Algebra/Ring/Subring/Basic.lean,Mathlib/Algebra/Ring/Subsemiring/Basic.lean,Mathlib/Algebra/Star/NonUnitalSubalgebra.lean,Mathlib/GroupTheory/Subgroup/Center.lean,Mathlib/GroupTheory/Submonoid/Center.lean,Mathlib/RingTheory/NonUnitalSubring/Basic.lean,Mathlib/RingTheory/NonUnitalSubsemiring/Basic.lean |
10 |
50 |
['SnirBroshi', 'github-actions', 'tb65536', 'themathqueen', 'vlad902'] |
themathqueen assignee:themathqueen |
3-9920 3 days ago |
3-16498 3 days ago |
10-21468 10 days |
| 41617 |
joelriou author:joelriou |
feat(Order/Fin): conditions for `Fin.insertNth` to be monotone or strictly monotone |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
86/0 |
Mathlib.lean,Mathlib/Order/Fin/InsertNth.lean |
2 |
6 |
['Whysoserioushah', 'github-actions', 'joelriou', 'robin-carlier'] |
nobody |
3-9446 3 days ago |
3-50587 3 days ago |
26-51084 26 days |
| 41339 |
mkaratarakis author:mkaratarakis |
feat(ComputablePolynomial): define SparsePoly, a computable univariate polynomial |
`SparsePoly R` is a computable, kernel-reducible representation of univariate polynomials over a commutative ring `R` with `DecidableEq R`: a list of `(exponent, coefficient)` pairs with strictly decreasing exponents and nonzero coefficients, making the representation canonical. This first part defines the structure, the semantics `toPoly : SparsePoly R → Polynomial R`, and addition.
Started by Mario Carneiro at the Hausdorff Institute (June 2024) with design notes and an original Lean prototype by James Davenport (https://github.com/JamesHDavenport/Dagstuhl23401, `verify-irred/VerifyIrred`) and the proofs were done with the help of Claude code.
|
t-meta |
201/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/ComputablePolynomial/Basic.lean |
3 |
2 |
['github-actions'] |
JovanGerb assignee:JovanGerb |
3-8792 3 days ago |
34-43544 34 days ago |
34-44067 34 days |
| 41120 |
teorth author:teorth |
feat(Analysis/SpecialFunctions/Gamma/Deriv,NumberTheory/Harmonic/GammaDeriv): formulae for the derivative of Gamma / eulerMascheroni |
Some integral representations of the derivative of the Gamma function, or the Euler-Mascheroni constant, focusing on the real form of the Gamma function rather than the complex one (as formulae for the latter are already present).
---
The initial code was human generated; an AI agent was used to help proofread and refactor the code subsequently.
- [x] depends on: #41119
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
91/7 |
Mathlib/Analysis/SpecialFunctions/Gamma/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Pow/Real.lean,Mathlib/NumberTheory/Harmonic/GammaDeriv.lean |
3 |
27 |
['felixpernegger', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'teorth'] |
nobody |
3-8725 3 days ago |
3-9930 3 days ago |
21-78319 21 days |
| 41503 |
JovanGerb author:JovanGerb |
feat(GRewrite): support strict rewriting in `>`/`≥` |
This PR adds `gcongr strict` tags in order to support strict rewriting in `≥`/`>`. Previously this only worked in `≤`/`<`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
maintainer-merge
|
9/0 |
Mathlib/Order/Basic.lean,MathlibTest/Tactic/GRewrite.lean |
2 |
4 |
['JovanGerb', 'github-actions', 'grunweg'] |
nobody |
3-8644 3 days ago |
30-14795 30 days ago |
30-14783 30 days |
| 35402 |
samueloettl author:samueloettl |
feat(Dynamics/BirkhoffSum): birkhoffAverage const |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
I think this is useful and one of these should be a simp lemma.
I'm not really sure if I got the naming of the theorems correct.
When generalizing to the assumption (n : R) ≠ 0 instead of the special case CharZero R with n ≠ 0 I had to use "open Classical in". I'm a bit unfamiliar with that part so please check if this makes sense. See also https://github.com/leanprover-community/mathlib4/pull/35307#discussion_r2823586252
[](https://gitpod.io/from-referrer/)
|
t-dynamics
new-contributor
|
14/0 |
Mathlib/Dynamics/BirkhoffSum/Average.lean |
1 |
39 |
['Maldooor', 'github-actions', 'lua-vr', 'mcdoll', 'plp127', 'samueloettl'] |
nobody |
3-7885 3 days ago |
100-19923 100 days ago |
166-18724 166 days |
| 37964 |
mortarsanjaya author:mortarsanjaya |
feat(Algebra/Order/Floor): weaken assumptions on theorems about `FloorRing` |
This PR weakens as much assumptions as possible on theorems about `FloorSemiring` and `FloorRing`. Mainly, `IsOrderedRing` and `IsStrictOrderedRing` are weakened to just `IsOrderedAddMonoid` or removed completely from the assumptions on the theorems.
Most theorems can be generalized as is or only requires a minor modification of replacing lemmas about casting naturals/integers preserving order (the likes of `Nat.cast_le`, `Int.cast_lt`, etc.) with the corresponding version for `FloorRing`. Some other lemmas require modification in the proofs, but these changes shorten the proofs. The new proof of the theorem `Int.mul_cast_floor_div_cancel_of_pos` requires an extra import.
The assumption `IsOrderedAddMonoid` is required on lemmas that involve comparison + addition, and `IsOrderedRing` is required only on lemmas that involve comparison + multiplication of two non-integer elements.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37714
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
168/141 |
Mathlib/Algebra/ContinuedFractions/Computation/Translations.lean,Mathlib/Algebra/Order/Floor/Defs.lean,Mathlib/Algebra/Order/Floor/Ring.lean,Mathlib/Algebra/Order/Floor/Semifield.lean,Mathlib/Algebra/Order/Floor/Semiring.lean,Mathlib/Algebra/Order/Round.lean,Mathlib/Analysis/SpecificLimits/Basic.lean,Mathlib/Data/Int/Log.lean,Mathlib/Data/NNRat/Floor.lean,Mathlib/Data/Rat/Floor.lean,Mathlib/MeasureTheory/Function/Floor.lean,Mathlib/Order/Interval/Finset/Floor.lean,Mathlib/Topology/Algebra/Order/Floor.lean |
13 |
12 |
['github-actions', 'leanprover-radar', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mortarsanjaya', 'themathqueen'] |
nobody |
3-7600 3 days ago |
3-9777 3 days ago |
51-27710 51 days |
| 42446 |
ipezygj author:ipezygj |
feat(Algebra/Order/Ring/Pow): bernoulli's inequality for a subtracted term |
Adds `one_sub_mul_le_pow`, the mirror of `one_add_mul_le_pow`:
```lean
lemma one_sub_mul_le_pow (H : a ≤ 2) (n : ℕ) : 1 - n * a ≤ (1 - a) ^ n
```
`Mathlib/Algebra/Order/Ring/Pow.lean` already carries Bernoulli in the `1 + a` form
and one reformulation of it (`one_add_mul_sub_le_pow`); this is the `1 - a` form,
which is the shape that comes up when bounding a product of complements — for
example showing that `1 - (1 - p) ^ n ≤ n * p`, the comparison between the Šidák and
Bonferroni corrections in statistics, which follows immediately by `linarith`.
The hypothesis `a ≤ 2` is exactly what `one_add_mul_le_pow`'s `-2 ≤ -a` becomes, and
it is load-bearing rather than decorative: the inequality fails for `a > 2` (checked
numerically over a grid before writing the proof).
Proof is two lines and reduces directly to the existing lemma.
This is my first contribution to mathlib, so please do point out anything that does
not match the library's conventions.
---
[Blueprint] not applicable.
|
t-algebra
new-contributor
label:t-algebra$ |
6/0 |
Mathlib/Algebra/Order/Ring/Pow.lean |
1 |
3 |
['github-actions'] |
nobody |
3-6313 3 days ago |
3-9313 3 days ago |
3-9301 3 days |
| 37199 |
mckoen author:mckoen |
feat(CategoryTheory/Monoidal/Arrow): pushout-products of monomorphisms are monic |
Proves conditions under which the pushout-product of two monomorphisms is again a monomorphism.
- [x] depends on: #33935
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
109/1 |
Mathlib.lean,Mathlib/CategoryTheory/Adhesive/Basic.lean,Mathlib/CategoryTheory/Adhesive/PushoutProduct.lean,Mathlib/CategoryTheory/Monoidal/Cartesian/Basic.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
3-6061 3 days ago |
3-7908 3 days ago |
3-8340 3 days |
| 38664 |
joelriou author:joelriou |
feat(AlgebraicTopology/SimplicialSet): more API for `SSet.op` |
---
- [x] depends on: #38662
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
tech debt
maintainer-merge
|
136/36 |
Mathlib/AlgebraicTopology/SimplexCategory/Rev.lean,Mathlib/AlgebraicTopology/SimplicialObject/Op.lean,Mathlib/AlgebraicTopology/SimplicialSet/KanComplex/MulStruct.lean,Mathlib/AlgebraicTopology/SimplicialSet/Op.lean,Mathlib/AlgebraicTopology/SimplicialSet/StdSimplex.lean |
5 |
18 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'robin-carlier'] |
dagurtomas assignee:dagurtomas |
3-242 3 days ago |
3-1458 3 days ago |
42-9726 42 days |
| 42451 |
FawadHa1der author:FawadHa1der |
perf(Analysis/Distribution/SchwartzSpace): split denseRange_toLpCLM off Basic to shorten the longest pole |
Shortening the "longest pole" in the mathlib build. LLM help was used.
Per [lake prof report](https://speed.lean-lang.org/mathlib4-out/c8830a1d9ceaffabd7c8c7493d9a9be3ead6ea74/) SchwartzSpace/Basic.lean sits on the longest pole. With this change SchwartzSpace/Basic no longer imports SmoothApprox( which imported the whole manifold chain) hence shortening the longest pole by **23s** of ~502 s
denseRange_toLpCLM is moved to a new file SchwartzSpace/DenseLp.lean. |
t-analysis
new-contributor
|
59/18 |
Mathlib.lean,Mathlib/Analysis/Distribution/SchwartzSpace.lean,Mathlib/Analysis/Distribution/SchwartzSpace/Basic.lean,Mathlib/Analysis/Distribution/SchwartzSpace/DenseLp.lean,Mathlib/Analysis/Fourier/LpSpace.lean |
5 |
4 |
['FawadHa1der', 'github-actions'] |
nobody |
2-84389 2 days ago |
2-85051 2 days ago |
2-85220 2 days |
| 42266 |
menon-codes author:menon-codes |
refactor: making trans usage explicit with kerLift |
Slightly simplifies the argument used in `exists_integral_inj_algHom_of_quotient` for clarity.
This is also needed to fix a small edge case present in a linter I am making as discussed here: [#mathlib4 > Linter for ellipsis @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Linter.20for.20ellipsis/near/613523943) |
t-ring-theory
new-contributor
maintainer-merge
|
2/5 |
Mathlib/RingTheory/NoetherNormalization.lean |
1 |
8 |
['copilot-pull-request-reviewer', 'github-actions', 'grunweg', 'menon-codes'] |
nobody |
2-84227 2 days ago |
3-15960 3 days ago |
8-58454 8 days |
| 38584 |
TJHeeringa author:TJHeeringa |
feat(Analysis/InnerProductSpace/Reproducing): Add outerKernel, mem_iff |
---
Adds the `outerKernel` definition and the theorem `mem_iff`. These are needed for proving statements involving embeddings of RKHS.
I can split `mem_of_posSemidef` and `mem_iff` off into a different pull request if that is preferred.
The theorems `mem_of_posSemidef` and `posSemidef_of_mem` are the two directions of `mem_iff`. `posSemidef_of_mem` is slightly stronger than the converse direction of `mem_iff` in the sense that it also specifies the constant `c` in the statement. The specified `c` is in fact the smallest possible `c` for which the statement holds.
The statement `mem_of_posSemidef` proves `∃ (g : H), (g : X → V) = f`. We could instead write `f ∈ (coeCLM 𝕜 (H:=H)).range`. Making this change would require the addition of the line `simp only [LinearMap.mem_range, coe_coe, coeCLM_apply]` in the beginning of the proof. The full beginning is then
```
lemma mem_of_posSemidef (f : X → V) {c : ℝ}
(hc : ((c : 𝕜) ^ 2 • kernel H - outerKernel 𝕜 f).PosSemidef) : f ∈ (coeCLM 𝕜 (H:=H)).range := by
simp only [LinearMap.mem_range, coe_coe, coeCLM_apply]
let Laux : ...
```
Making a `MemRKHS` like MemLp and MemSobolev and then writing `MemRKHS H f` is also an option. Happy to change it to whatever is preferred.
The proof of `mem_of_posSemidef` is based on the idea that any function f in the RKHS satisfies `<f,\sum_n K(\cdot,x_n)v_n>=\sum_{n} <f(x_n),v_n>` for `x_n\in X` and `v_n\in V` by the reproducing property. We define the operator L(\sum_n K(\cdot,x_n)v_n) = \sum_{n} <f(x_n),v_n>. This is bounded by the condition based on the kernels, and thus extends to a bounded linear operator on the RKHS. Its Riesz' representer agrees pointwise with f.
AI:
When asking how to avoid Classical.choose in constructing the operator L, Claude suggested the approach of going through the quotient. I made the proof using Claude as supplementary Loogle. Afterwards, I asked it to help shorted the proofs. Some suggestions for `mem_of_posSemidef` were applied. The other suggestions were not helping or not correct.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
new-contributor
|
121/3 |
Mathlib/Analysis/InnerProductSpace/Reproducing.lean |
1 |
33 |
['Maldooor', 'TJHeeringa', 'github-actions', 'j-loreaux', 'themathqueen'] |
j-loreaux assignee:j-loreaux |
2-81391 2 days ago |
2-81391 2 days ago |
39-56905 39 days |
| 42455 |
plp127 author:plp127 |
feat: partial sections for `Filter.Product` |
Change the definition of `Filter.Product` to only use partial functions defined in some neighborhood of `l`. This is mathematically the correct definition, and differs from the previous definition in that with the previous definition `IsEmpty (l.Product ε) ↔ ∃ x : α, IsEmpty (ε x)` but with the new definition `IsEmpty (l.Product ε) ↔ ∃ᶠ x in l, IsEmpty (ε x)`. See [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Non-standard.20analysis/near/572530042). See also #36763.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
1094/479 |
Mathlib/Analysis/Real/Hyperreal.lean,Mathlib/MeasureTheory/Function/AEEqFun.lean,Mathlib/MeasureTheory/Function/SimpleFuncDenseLp.lean,Mathlib/MeasureTheory/Integral/SetToL1.lean,Mathlib/ModelTheory/Ultraproducts.lean,Mathlib/Order/Filter/FilterProduct.lean,Mathlib/Order/Filter/Germ/Basic.lean,Mathlib/Order/Filter/Germ/OrderedMonoid.lean,Mathlib/Order/Filter/Ring.lean,Mathlib/Topology/Germ.lean |
10 |
1 |
['github-actions'] |
nobody |
2-72117 2 days ago |
2-73015 2 days ago |
2-74700 2 days |
| 42346 |
mortarsanjaya author:mortarsanjaya |
feat(Algebra/CharP/Two): weaken theorem hypothesis |
This PR weakens the hypothesis of several theorems about rings of characteristic 2. Some of these lemmas do not require the (semi)ring to be associative, some of them do not require subtraction (and thus `Ring` can be weakened to `Semiring`), and those about integer cast do not even require multiplication.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
71/45 |
Mathlib/Algebra/CharP/Two.lean |
1 |
3 |
['github-actions', 'mortarsanjaya', 'vihdzp'] |
nobody |
2-70731 2 days ago |
3-9375 3 days ago |
5-71320 5 days |
| 42341 |
gaetanserre author:gaetanserre |
feat(Kernel/Deterministic): any deterministic kernel is s-finite |
Any deterministic kernel is s-finite.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
maintainer-merge
|
11/0 |
Mathlib/Probability/Kernel/Deterministic.lean |
1 |
7 |
['CoolRmal', 'github-actions'] |
CoolRmal assignee:CoolRmal |
2-70443 2 days ago |
2-70443 2 days ago |
5-30423 5 days |
| 42196 |
ADedecker author:ADedecker |
feat: `IsLocallyClosedAt` predicate |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
212/49 |
Mathlib/Topology/Defs/Filter.lean,Mathlib/Topology/LocallyClosed.lean |
2 |
1 |
['github-actions'] |
nobody |
2-69752 2 days ago |
2-70195 2 days ago |
2-70183 2 days |
| 41289 |
D-Thomine author:D-Thomine |
feat(Dynamics): recurrents set and refactoring of conservative maps |
This PR deals mostly with `Dynamics.Conservative`. The notion of *recurrent set* is introduced: a set `s` is recurrent if almost every point in `s` returns to `s`. Most properties of conservative maps actually apply to recurrent sets.
The definition of conservative map is changed to align with this notion of recurrent set (a map is conservative if every measurable set is recurrent). Theorem `MeasureTheory.conservative_iff_exists_mem_iterate_mem` expresses the equivalence of the new definition with the older one.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-dynamics |
341/113 |
Mathlib/Dynamics/Ergodic/Conservative.lean,Mathlib/Dynamics/Ergodic/MeasurePreserving.lean,Mathlib/MeasureTheory/Measure/QuasiMeasurePreserving.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/CountableInter.lean,Mathlib/Order/Interval/Finset/Basic.lean |
6 |
9 |
['D-Thomine', 'github-actions', 'mathlib-merge-conflicts', 'mcdoll'] |
mcdoll assignee:mcdoll |
2-69729 2 days ago |
2-71712 2 days ago |
23-80348 23 days |
| 42457 |
thorimur author:thorimur |
chore: remove `import all`s by making some `norm_num` components public |
Removes some `import all`s by making `evalMinFac.core`, `evalIntMod.go`, and `eval`(`LE`/`LT`)`.core` public.
Note that this inlines the `Nat.instAddMonoidWithOne` instance in `evalMinFac.core` instead of making it an argument. Otherwise, the code is not touched.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
large-import
|
96/94 |
Mathlib/Tactic/NormNum/DivMod.lean,Mathlib/Tactic/NormNum/Ineq.lean,Mathlib/Tactic/NormNum/Prime.lean,Mathlib/Tactic/ReduceModChar.lean,Mathlib/Tactic/Ring/Compare.lean,Mathlib/Tactic/Simproc/Factors.lean |
6 |
4 |
['github-actions', 'leanprover-radar', 'thorimur'] |
nobody |
2-69504 2 days ago |
2-76001 2 days ago |
2-75989 2 days |
| 42359 |
vihdzp author:vihdzp |
chore: golf (and rename) `EuclideanDomain.to_principal_ideal_domain` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
22/30 |
Mathlib/RingTheory/DiscreteValuationRing/Basic.lean,Mathlib/RingTheory/PrincipalIdealDomain.lean,docs/100.yaml,docs/1000.yaml |
4 |
3 |
['github-actions', 'tb65536'] |
nobody |
2-69465 2 days ago |
5-68204 5 days ago |
5-68192 5 days |
| 32058 |
Thmoas-Guan author:Thmoas-Guan |
feat(Algebra): Baer criterion for injective dimension |
In this PR, we added the cateory version of Baer criterion stating that `M` is injective iff `Ext^1(R/I, M)` vanish for all ideal `I`. By dimension shifting, we also have `M` has injective dimension not exceeding `n` iff `Ext^{n + 1}(R/I, M)` vanish for all ideal `I`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36980
- [x] depends on: #39305
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-category-theory
label:t-algebra$ |
172/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/Ext/Baer.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/EnoughProjectives.lean |
3 |
86 |
['Thmoas-Guan', 'dagurtomas', 'github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib-splicebot', 'mathlib4-merge-conflict-bot'] |
mattrobball assignee:mattrobball |
2-67877 2 days ago |
49-23331 49 days ago |
135-15034 135 days |
| 35605 |
j-loreaux author:j-loreaux |
feat: transfer instances of `ContinuousFunctionalCalculus` to type synonyms with weaker topologies |
---
- [ ] depends on: #35551
- [ ] depends on: #40517
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
210/1 |
Mathlib.lean,Mathlib/Algebra/Algebra/Spectrum/Quasispectrum.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Transfer.lean,Mathlib/Topology/ContinuousMap/ContinuousMapZero.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
mcdoll assignee:mcdoll |
2-67876 2 days ago |
9-4592 9 days ago |
9-7812 9 days |
| 39212 |
emlis42 author:emlis42 |
feat(Algebra/ContinuedFractions): add `partNums!` and `partDens!` |
This PR adds `partNums!` and `partDens!`, which provide infinite stream representations for the sequences of partial numerators and denominators of a generalized continued fraction. |
t-algebra
new-contributor
label:t-algebra$ |
66/35 |
Mathlib/Algebra/ContinuedFractions/Basic.lean,Mathlib/Algebra/ContinuedFractions/ContinuantsRecurrence.lean,Mathlib/Algebra/ContinuedFractions/Determinant.lean,Mathlib/Algebra/ContinuedFractions/Translations.lean |
4 |
4 |
['emlis42', 'github-actions', 'grunweg'] |
kim-em assignee:kim-em |
2-67875 2 days ago |
88-9357 88 days ago |
88-9345 88 days |
| 40604 |
xroblot author:xroblot |
feat(Algebra.GroupWithZero): generalize SMulZeroClass to MonoidWithZero and lift MulDistribMulAction to nonZeroDivisors |
Generalize the instance `SMulZeroClass α β` under `[Group α] [GroupWithZero β] [MulDistribMulAction α β]`to `[Group α] [MonoidWithZero β] [MulDistribMulAction α β]`.
From an action `[Group G] [MonoidWithZero M] [MulDistribMulAction G M]`, use this instance to construct an action on the nonzero divisors of 'M'.
**No diamond**: there is no general instance giving an action on a submonoid as a target (that would need the submonoid to be invariant, which isn't automatic), so defining the action on `nonZeroDivisors` should not clash with anything .
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
55/6 |
Mathlib/Algebra/GroupWithZero/Action/Defs.lean,Mathlib/Algebra/GroupWithZero/NonZeroDivisors.lean,Mathlib/Algebra/Ring/Action/ConjAct.lean |
3 |
4 |
['github-actions', 'leanprover-radar', 'themathqueen'] |
joelriou assignee:joelriou |
2-67874 2 days ago |
47-18326 47 days ago |
48-82792 48 days |
| 40735 |
tb65536 author:tb65536 |
feat(NumberTheory/NumberField/AdeleRing): define the idele class group |
This PR defines the idele class group and the maps from the completions at finite places. This will be used to define Hecke L-Functions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
t-algebra
label:t-algebra$ |
82/5 |
Mathlib/NumberTheory/NumberField/AdeleRing.lean,Mathlib/NumberTheory/NumberField/InfiniteAdeleRing.lean,Mathlib/RingTheory/DedekindDomain/FiniteAdeleRing.lean,Mathlib/Topology/Algebra/RestrictedProduct/Basic.lean |
4 |
5 |
['github-actions', 'mathlib-merge-conflicts', 'smmercuri'] |
alreadydone assignee:alreadydone |
2-67873 2 days ago |
8-76621 8 days ago |
50-67591 50 days |
| 41717 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Walk): more `transfer` API |
---
The Hamiltonian lemmas don't really need `Finite`; I'll fix this after #41435 (in whichever merges second).
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
tech debt
|
54/23 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean |
4 |
1 |
['github-actions'] |
JovanGerb assignee:JovanGerb |
2-67869 2 days ago |
24-53931 24 days ago |
24-54022 24 days |
| 41880 |
mbkybky author:mbkybky |
feat(CategoryTheory/ObjectProperty): define objects admitting finite resolutions by objects satisfying `P : ObjectProperty C` |
Let `C` be a category, `P : ObjectProperty C` be a property of objectsin `C`. We say that `X : C` has a `P`-resolution of length `n` if there exists an exact sequence `0 ⟶ Eₙ ⟶ ⋯ ⟶ E₀ ⟶ X ⟶ 0` such that each `Eᵢ : C` satisfies `P`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
147/0 |
Mathlib.lean,Mathlib/CategoryTheory/ObjectProperty/HasFiniteResolution/Basic.lean |
2 |
8 |
['github-actions', 'joelriou'] |
dagurtomas assignee:dagurtomas |
2-67868 2 days ago |
17-56751 17 days ago |
19-12571 19 days |
| 41940 |
mcdoll author:mcdoll |
chore(Dynamics): deprecate `IsForwardInvariant` in favour of new `Set.IsInvariantOn` |
We define a predicate `Set.IsInvariantOn` that generalizes `IsInvariant` and as a special case contains `IsForwardInvariant`. The later is hence removed. We also move `IsInvariant` into the `Set` namespace to allow for dot-notation.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-dynamics |
52/17 |
Mathlib/Dynamics/Flow.lean,Mathlib/Dynamics/OmegaLimit.lean |
2 |
1 |
['github-actions'] |
urkud assignee:urkud |
2-67868 2 days ago |
18-57321 18 days ago |
18-67203 18 days |
| 41956 |
mckoen author:mckoen |
feat(CategoryTheory/Quotient): the quotient category is monoidal |
If `r : HomRel C` is a congruence on a (braided, symmetric) monoidal (resp. preadditive, linear) category `C` which satisfies certain compatibilities with left and right whiskering (resp. addition/scalar multiplication), then `Quotient r` is also (braided, symmetric) monoidal (resp. preadditive, linear).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
269/0 |
Mathlib.lean,Mathlib/CategoryTheory/Monoidal/Preadditive.lean,Mathlib/CategoryTheory/Quotient/Monoidal.lean |
3 |
4 |
['github-actions', 'joelriou', 'mckoen'] |
dagurtomas assignee:dagurtomas |
2-67867 2 days ago |
7-33957 7 days ago |
16-27602 16 days |
| 42022 |
felixpernegger author:felixpernegger |
chore(Condensed): reduce imports |
Removes all redundant import in Mathlib/Condensed
Note: I originally also tried to privatize each import (which is why I made this PR in the first place), but surprisingly this never actually works. Additionally, Mathlib/Condensed in never imported in another subfolder, so there is probably no downside to merging this now
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-condensed |
0/19 |
Mathlib/Condensed/Basic.lean,Mathlib/Condensed/Discrete/Basic.lean,Mathlib/Condensed/Discrete/Module.lean,Mathlib/Condensed/Epi.lean,Mathlib/Condensed/Light/Basic.lean,Mathlib/Condensed/Light/EffectiveEpi.lean,Mathlib/Condensed/Light/InternallyProjective.lean,Mathlib/Condensed/Light/Module.lean,Mathlib/Condensed/Light/Monoidal.lean,Mathlib/Condensed/Light/Small.lean,Mathlib/Condensed/Module.lean,Mathlib/Condensed/Solid.lean,Mathlib/Condensed/TopComparison.lean |
13 |
9 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors'] |
dagurtomas assignee:dagurtomas |
2-67866 2 days ago |
15-36574 15 days ago |
15-36574 15 days |
| 41882 |
theebayuser author:theebayuser |
feat(Data/List): decidability of HasPeriod and periods of repeated lists |
Hello, this PR extends `Mathlib/Data/List/PeriodicityLemma.lean` with:
* a `Decidable (List.HasPeriod w p)` instance (it is a prefix test), and
* two directions that relate periods to repetition:
* `hasPeriod_flatten_replicate` — `(replicate n l).flatten` has period `l.length`
* `eq_flatten_replicate_of_hasPeriod` — a word with period `p` and length `r * p` is the `r`-fold repetition of its length-`p` prefix.
This characterizes `r`-th powers of words by a period plus a length constraint, which a future follow-up PR that I plan to work on will use.
AI disclosure: This code was mostly generated by Claude Fable 5 and Opus 4.8 as part of my larger project on combinatorics on words, which I then reviewed and revised to contribute to mathlib.
|
t-data
LLM-generated
new-contributor
|
60/1 |
Mathlib/Data/List/PeriodicityLemma.lean |
1 |
8 |
['SnirBroshi', 'github-actions', 'theebayuser'] |
nobody |
2-67569 2 days ago |
20-45136 20 days ago |
20-45124 20 days |
| 42271 |
vihdzp author:vihdzp |
refactor: split `Data.ENat.Basic` |
There's various `assert_not_exists` scattered throughout the library that don't even permit `MonoidWithZero`. This is causing problems on #40901, since the `smallInductiveDimension` of a topological space (a relatively basic notion) is `WithBot ℕ∞`-valued.
We split `Data.ENat.Basic` into three files:
- `Data.ENat.Basic` now imports nothing about monoids.
- `Data.ENat.Monoid` contains the lemmas about the `LinearOrderedAddCommMonoidWithTop` structure.
- `Data.ENat.SuccOrder` contains the lemmas about the `SuccAddOrder` structure.
No new results are added. A few proofs are tweaked slightly so as to decrease imports.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
508/438 |
Mathlib.lean,Mathlib/Algebra/Polynomial/Degree/TrailingDegree.lean,Mathlib/Data/ENat/Basic.lean,Mathlib/Data/ENat/Lattice.lean,Mathlib/Data/ENat/Monoid.lean,Mathlib/Data/ENat/Pow.lean,Mathlib/Data/ENat/SuccOrder.lean,Mathlib/Data/Real/ENatENNReal.lean,Mathlib/Data/Seq/Basic.lean,Mathlib/NumberTheory/Padics/PadicVal/Defs.lean,Mathlib/Order/KrullDimension.lean,Mathlib/RingTheory/Multiplicity.lean,Mathlib/RingTheory/MvPowerSeries/Order.lean,Mathlib/RingTheory/UniqueFactorizationDomain/Basic.lean,Mathlib/RingTheory/UniqueFactorizationDomain/Multiplicity.lean,Mathlib/RingTheory/UniqueFactorizationDomain/Nat.lean,Mathlib/SetTheory/Cardinal/ENat.lean,Mathlib/Tactic/ENatToNat.lean,Mathlib/Topology/CWComplex/Classical/Basic.lean,Mathlib/Topology/Instances/ENat.lean,Mathlib/Topology/SmallInductiveDimension.lean,MathlibTest/Tactic/Grind/NatCastInstance.lean |
22 |
1 |
['github-actions'] |
nobody |
2-67041 2 days ago |
6-71413 6 days ago |
6-71410 6 days |
| 38018 |
matthewjasper author:matthewjasper |
feat(Algebra): expand Subalgebra.restrictScalars API |
Add an instance for the original algebra structure, the implied scalar tower instances, and the algebra equivalence with the original subalgebra. Use this to remove some `set_option backward.isDefEq.respectTransparency`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
|
61/15 |
Mathlib/Algebra/Algebra/Subalgebra/Tower.lean,Mathlib/RingTheory/AlgebraicIndependent/TranscendenceBasis.lean,Mathlib/RingTheory/Finiteness/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean |
4 |
17 |
['eric-wieser', 'github-actions', 'kbuzzard', 'leanprover-radar', 'mariainesdff', 'mathlib-merge-conflicts', 'matthewjasper'] |
nobody |
2-66973 2 days ago |
23-75301 23 days ago |
98-41167 98 days |
| 41775 |
JovanGerb author:JovanGerb |
chore(Order/SymmDiff): use `to_dual` |
This PR generates `bihimp` from `symmDiff` using `to_dual`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
50/169 |
Mathlib/Order/SymmDiff.lean,Mathlib/Tactic/Translate/ToDual.lean |
2 |
7 |
['JovanGerb', 'github-actions', 'vihdzp'] |
nobody |
2-66613 2 days ago |
2-69667 2 days ago |
22-50335 22 days |
| 41915 |
theebayuser author:theebayuser |
feat(Data/List): infixes, the enumerator of contiguous factors |
Hello, this PR extends `Mathlib/Data/List/Infix.lean` with the missing third enumerator alongside `inits` and `tails`:
* `infixes l` — all contiguous factors (infixes) of `l`, with multiplicity, as every prefix of every suffix, and
* its membership characterization and basic API:
* `mem_infixes` (`@[simp]`) — `s ∈ t.infixes ↔ s <:+: t`, the infix analogue of `mem_inits`/`mem_tails`
* `infixes_nil`, `infixes_cons`, `length_infixes_cons`, `nil_mem_infixes`, `self_mem_infixes`, `infixes_ne_nil`.
This gives `∃ s, s <:+: t ∧ P s` and `∀ s, s <:+: t → P s` executable bounded-search forms (e.g. deciding repetition-freeness of a fixed word by `decide`), which a future follow-up PR that I plan to work on will use.
AI disclosure: This code was mostly generated by Claude Fable 5 and Opus 4.8 as part of my larger project on combinatorics on words, which I then reviewed and revised to contribute to mathlib.
|
t-data
LLM-generated
new-contributor
|
44/3 |
Mathlib/Data/List/Infix.lean |
1 |
3 |
['github-actions', 'theebayuser'] |
nobody |
2-65292 2 days ago |
19-58351 19 days ago |
19-58339 19 days |
| 42424 |
lydia-schiff author:lydia-schiff |
feat(Order/Partition/Finpartition): transport a set partition along a type equivalence |
- Adds `Finpartition.congr` to transport a `Finpartition` along a type equivalence.
- We can use `Finpartition.map` if we have an order-iso, and the equivalence induces one via the new `Finset.congrOrderIso` which is based on `Equiv.finsetCongr`.
- Includes parts, card, refl, and round-trip lemmas.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- `Equiv.finsetCongr` already gives us an equivalence of Finsets, so the new `Finset.congrOrderIso` just adds that the power-set lattice structure is also preserved.
- Includes lemmas showing that the parts are e-images of the old ones, card is preserved, and refl + round-trip for the equivalence.
- The cardinality lemma was the original motivation from some work on Stirling numbers, but I thought that `Finpartition.congr` and `Finset.congrOrderIso` seemed reusable and hopefully useful in their own right, and thought it would make a good first contribution.
- Zulip thread about naming and placement [here](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/.60Finpartition.2Econgr.60.20.E2.80.94.20naming.20.26.20placement)
- I used Claude Opus 4.8 to help draft the proofs and explore the API. I have spent several weeks making sure I understand and can justify every line and I've learned a lot which is great.
[](https://gitpod.io/from-referrer/)
|
t-order
LLM-generated
t-combinatorics
new-contributor
|
64/0 |
Mathlib/Data/Finset/Image.lean,Mathlib/Order/Partition/Finpartition.lean |
2 |
4 |
['github-actions', 'lydia-schiff'] |
nobody |
2-62437 2 days ago |
2-65246 2 days ago |
2-70630 2 days |
| 42185 |
wwylele author:wwylele |
feat(combinatorics): pentagonal number theorem for normed ring |
This completes the other half of the theorem.
For the new function `eulerFunction`, I considered the alternative definition using `FormalMultilinearSeries`. However, a lot of things around `FormalMultilinearSeries` are defined for algebra with a base `Fieid` (e.g. `FormalMultilinearSeries.ofScalars`), whereas the new theorem here works for any complete normed rings. Those `FormalMultilinearSeries` lemma might generalize to rings, but ultimately I don't gain anything from using `FormalMultilinearSeries` while increasing the imports, so I decided against it.
I also made change to the forbidden import list, and allow Combinatorics to import MeasureTheory and Probability. This is a somewhat accidental import in the PR (via `Mathlib.Analysis.SpecialFunctions.Log.Summable`, which pull in the integral subtree for results on log), but it does makes sense that Combinatorics should be allow to interact with Probability anyway. (Zulip thread for this [#mathlib4 > Surprise dependency Analysis -> MeasureTheory -> Probability](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Surprise.20dependency.20Analysis.20-.3E.20MeasureTheory.20-.3E.20Probability/with/613206628))
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #42184
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
177/4 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Pentagonal/Basic.lean,Mathlib/Combinatorics/Enumerative/Pentagonal/EulerFunction.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean,docs/1000.yaml |
5 |
3 |
['copilot-pull-request-reviewer', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
2-61823 2 days ago |
3-78257 3 days ago |
3-80392 3 days |
| 40599 |
ChiCubed author:ChiCubed |
feat(LinearAlgebra): rank-nullity theorems for Submodule map/comap |
We show forms of the rank-nullity theorem involving `Submodule.map` and `Submodule.comap`. Together with `LinearMap.ker_comp` this provides a formula for the rank of the kernel of a composite (and, in finite dimensions at least, for the rank of the range).
---
I didn't explicitly write the aforementioned formula for rank ker (f ∘ g) since it is just `LinearMap.ker_comp` followed by `LinearMap.lift_rank_comap`, but perhaps it should be added for discoverability?
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
63/15 |
Mathlib/Algebra/Module/Submodule/Ker.lean,Mathlib/Algebra/Module/Submodule/Map.lean,Mathlib/Algebra/Module/Submodule/Range.lean,Mathlib/LinearAlgebra/Dimension/RankNullity.lean |
4 |
24 |
['ChiCubed', 'github-actions', 'themathqueen', 'wwylele'] |
themathqueen assignee:themathqueen |
2-60751 2 days ago |
2-62931 2 days ago |
52-77454 52 days |
| 40448 |
ChiCubed author:ChiCubed |
feat(LinearAlgebra/Dimension): tower law for algebraic extensions |
We generalise the tower law for `Module.rank` to the situation of a module over an algebraic extension of domains.
---
See [the Zulip thread](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Tower.20law.20for.20.60Module.2Erank.60/) for some associated discussion.
I am not sure about in which file these results should live, or what their names should be. For the file I have gone with `LinearAlgebra/Dimension/Algebraic.lean` for now, because these feel more like dimension theorems than `Algebra.IsAlgebraic` theorems, and IMO do not logically fit into the other existing files in `LinearAlgebra/Dimension`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
297/30 |
Mathlib.lean,Mathlib/Algebra/Group/Action/Faithful.lean,Mathlib/LinearAlgebra/Dimension/Domain.lean,Mathlib/LinearAlgebra/Dimension/Free.lean,Mathlib/RingTheory/Algebraic/Integral.lean,Mathlib/RingTheory/Localization/FractionRing.lean |
6 |
14 |
['ChiCubed', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'themathqueen'] |
ocfnash assignee:ocfnash |
2-60206 2 days ago |
2-62758 2 days ago |
54-30123 54 days |
| 42423 |
mcdoll author:mcdoll |
feat(LinearAlgebra): kernel of a `LinearPMap` |
We define the kernel of a `LinearPMap` as a submodule of `E` and prove basic properties of it. If one takes `f.toFun.ker` then it is a submodule of `f.domain`, which leads to many problems.
Secondly, the code around `LinearPMap.inverse` gets cleaned up: use `LinearPMap.ker`, use dot-notation consistently, and some golfs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
85/32 |
Mathlib/LinearAlgebra/LinearPMap.lean,Mathlib/Topology/Algebra/Module/LinearPMap.lean |
2 |
4 |
['github-actions', 'mcdoll', 'wwylele'] |
nobody |
2-59048 2 days ago |
3-56804 3 days ago |
3-57940 3 days |
| 42463 |
vihdzp author:vihdzp |
chore: fix all instances of `linter.defProp` |
I've omitted the `MathlibTest` folder, since it's a bit difficult to tell which of those usages are intended.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
18/25 |
Mathlib/CategoryTheory/Category/Preorder.lean,Mathlib/Combinatorics/Hindman.lean,Mathlib/Computability/Partrec.lean,Mathlib/Computability/Primrec/Basic.lean,Mathlib/Data/Nat/Find.lean,Mathlib/NumberTheory/Padics/Hensel.lean |
6 |
1 |
['github-actions'] |
nobody |
2-58847 2 days ago |
2-61138 2 days ago |
2-61388 2 days |
| 42466 |
xroblot author:xroblot |
feat(LinearAlgebra): unimodular elements and completion to a basis |
Add a new file `Mathlib/LinearAlgebra/Unimodular.lean` about unimodular
elements of a module (those on which some linear functional takes the value
`1`).
Main results:
* `Module.Basis.span_repr_eq_top_iff`: `v` is unimodular iff its coordinates in
a basis generate the unit ideal;
* `Module.Free.exists_basis_apply_zero_eq`: a unimodular vector of a rank-two
free module completes to a basis;
* `Module.Basis.span_repr_one_eq_top` / `Module.Free.exists_linearMap_apply_one_eq_one`:
`1` is unimodular in a nonzero free algebra.
Some of the mathematics and proofs in this file were developed with the help of Claude 🤖.
|
t-algebra label:t-algebra$ |
134/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Unimodular.lean,docs/references.bib |
3 |
1 |
['github-actions'] |
nobody |
2-54021 2 days ago |
2-54587 2 days ago |
2-54723 2 days |
| 42467 |
yuanyi-350 author:yuanyi-350 |
feat(Topology/Homotopy): show covering maps are surjective on path components |
|
t-topology |
12/0 |
Mathlib/Topology/Homotopy/Lifting.lean |
1 |
1 |
['github-actions'] |
nobody |
2-49612 2 days ago |
2-50229 2 days ago |
2-50217 2 days |
| 42452 |
menon-codes author:menon-codes |
feat: lint for use of ellipsis |
See the conversation at [#mathlib4 > Linter for ellipsis @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Linter.20for.20ellipsis/near/613523943)
Creates a linter to detect excessive use of `_` holes at end of lemmas and replace it when appropriate with uses of `..`
It also creates a respective test file to check it, though I am not too certain about the styles and techniques mathlib uses for testing.
AI (GPT 5.6 Terra) was used heavily in the documentation and testing of the code. Most of the logic and coding was done manually. |
new-contributor
LLM-generated
t-linter
|
927/5 |
Mathlib.lean,Mathlib/Init.lean,Mathlib/RingTheory/NoetherNormalization.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean,Mathlib/Tactic/Linter/EllipsisPlaceholders.lean,MathlibTest/Linter/EllipsisPlaceholders.lean |
7 |
7 |
['copilot-pull-request-reviewer', 'github-actions', 'mathlib-bors', 'menon-codes'] |
nobody |
2-45504 2 days ago |
2-48616 2 days ago |
2-52759 2 days |
| 42469 |
mo271 author:mo271 |
feat(RingTheory/LaurentSeries): `derivative_map` and friends |
noticed in #42428 that `Polynomial` has these, while `LaurentSeries` not yet.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
21/0 |
Mathlib/RingTheory/LaurentSeries.lean |
1 |
2 |
['github-actions', 'mathlib-bors'] |
nobody |
2-45476 2 days ago |
2-46018 2 days ago |
2-46526 2 days |
| 41816 |
tb65536 author:tb65536 |
feat(GroupTheory/PGroup): add exponent characterization |
This PR adds the exponent characterization of p-groups, and uses it to golf the existing proof of `isPGroup_iff_card_dvd_pow`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
large-import
|
41/40 |
Mathlib/GroupTheory/Exponent.lean,Mathlib/GroupTheory/PGroup.lean |
2 |
3 |
['SnirBroshi', 'github-actions', 'tb65536'] |
nobody |
2-41394 2 days ago |
2-41397 2 days ago |
2-42568 2 days |
| 42472 |
yuanyi-350 author:yuanyi-350 |
feat(Topology/Homotopy/Lifting): add bijectivity results for monodromy evaluation |
|
t-topology |
40/0 |
Mathlib/Topology/Homotopy/Lifting.lean |
1 |
1 |
['github-actions'] |
nobody |
2-38896 2 days ago |
2-39459 2 days ago |
2-39447 2 days |
| 40812 |
karlesmarin author:karlesmarin |
feat(RingTheory/HopfAlgebra): antipode is the unique convolution inverse of the identity |
Adds `HopfAlgebra.eq_antipode_of_convMul_id_eq_one` and `HopfAlgebra.eq_antipode_of_id_convMul_eq_one`: an `R`-linear map that is a one-sided convolution inverse of the identity equals the antipode. Either side suffices.
The proof is `left_inv_eq_right_inv` in the convolution monoid `WithConv (A →ₗ[R] A)` together with the two antipode axioms, transported by `toConv_injective`. It closes the "uniqueness of Hopf algebra structure on a bialgebra" TODO in this file, and is the uniqueness companion to the existing `ofConvInverse` (existence).
---
**AI disclosure.** This contribution was written with AI assistance (Claude, used as a coding assistant). I have reviewed and understand the proof and can justify the design. The result is classical; the contribution is its Lean formalization.
|
t-ring-theory
new-contributor
LLM-generated
maintainer-merge
|
17/3 |
Mathlib/RingTheory/HopfAlgebra/Basic.lean,Mathlib/RingTheory/HopfAlgebra/Convolution.lean |
2 |
24 |
['YaelDillies', 'github-actions', 'hawkrobe', 'karlesmarin', 'themathqueen'] |
nobody |
2-32915 2 days ago |
2-32939 2 days ago |
38-36878 38 days |
| 42477 |
Multramate author:Multramate |
feat(NumberTheory/EllipticDivisibilitySequence): add some lemmas and grind some proofs |
Also rename `odd` to `neg` because `odd` will be reserved for odd elliptic relations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
t-algebra
maintainer-merge
label:t-algebra$ |
95/53 |
Mathlib/Data/Nat/DvdSequence.lean,Mathlib/NumberTheory/EllipticDivisibilitySequence.lean |
2 |
5 |
['Multramate', 'github-actions', 'tb65536'] |
nobody |
2-20167 2 days ago |
2-24317 2 days ago |
2-24305 2 days |
| 41244 |
joelriou author:joelriou |
chore(CategoryTheory/Adjunction/AdjointFunctorTheorems): generalize universes |
For theorems involving a category `C : Type u` (with `Category.{v} C`), the smallness assumptions or the existence of limits/colimits are expressed relative to an arbitrary universe `w` (instead of `w = v`), provided the assumption `LocallySmall.{w} C` is added. (This makes this more coherent with the API about locally presentable/accessible categories.)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
maintainer-merge
|
71/36 |
Mathlib/CategoryTheory/Adjunction/AdjointFunctorTheorems.lean,Mathlib/CategoryTheory/Comma/StructuredArrow/Small.lean,Mathlib/CategoryTheory/Limits/Constructions/WeaklyInitial.lean,Mathlib/CategoryTheory/Limits/Shapes/WideEqualizers.lean |
4 |
7 |
['github-actions', 'robin-carlier', 'smorel394'] |
robin-carlier assignee:robin-carlier |
2-11113 2 days ago |
33-84086 33 days ago |
36-75922 36 days |
| 42398 |
gasparattila author:gasparattila |
feat: add a wrapper around `fun_prop` that calls `simp` on the function |
This new tactic is used for the `autoParam` tactics of `Homeomorph`, etc. These `autoParam`s currently use `dsimp`, which often requires the use of `backward.defeqAttrib.useBackward`, since `simps` tags lemmas with `@[backward_defeq]`. It also prevents the use of general lemmas such as `IsAddApply.add_apply`, which cannot hold definitionally.
This PR also removes the `backward.defeqAttrib.useBackward` options which become unnecessary as a result of this change.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
t-meta
tech debt
|
52/26 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/FunPropSimp.lean,Mathlib/Topology/Algebra/Group/Basic.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/PiProd.lean,Mathlib/Topology/Algebra/Module/Equiv.lean,Mathlib/Topology/Algebra/Module/Multilinear/Basic.lean,Mathlib/Topology/Algebra/Module/Star.lean,Mathlib/Topology/Constructions/SumProd.lean,Mathlib/Topology/Homeomorph/Defs.lean,Mathlib/Topology/Homeomorph/Lemmas.lean |
12 |
27 |
['JovanGerb', 'gasparattila', 'github-actions', 'grunweg', 'leanprover-radar'] |
thorimur assignee:thorimur |
2-4520 2 days ago |
2-6448 2 days ago |
4-17644 4 days |
| 40963 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Paths): add lemma about the first dart if dropLast is a path |
If `dropLast` of a walk is a path, a dart of the walk sharing its first vertex with the walk also shares its second vertex.
I thought this was a natural more general form of `IsPath.eq_snd_of_mem_edges`, useful for cycles for example.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
15/0 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Operations.lean |
2 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
2-4441 2 days ago |
2-5059 2 days ago |
44-24742 44 days |
| 38848 |
jcreinhold author:jcreinhold |
feat(AlgebraicTopology/SimplicialSet): exists_isPushout_of_ne_top |
Every proper subcomplex of a simplicial set extends by attaching a single cell along its boundary, exhibited as a pushout of `∂Δ[n] ↪ Δ[n]`. This is the per-cell input for cell-by-cell filtrations of monomorphisms in `SSet`.
Adapted from @joelriou 's [proof](https://github.com/joelriou/topcat-model-category/blob/813338a8c88cfe0096deed7e3ba7daf92d4a1c71/TopCatModelCategory/SSet/Boundary.lean#L187). I also added the supporting lemma `Types.isPullback_of_eq_setPreimage` (set-preimage square is a pullback in `Type u`).
AI use: Claude helped locate `subtype_val_mono` and the `backward.isDefEq.respectTransparency` option.
|
t-algebraic-topology
new-contributor
|
117/3 |
Mathlib/AlgebraicTopology/SimplicialSet/Boundary.lean,Mathlib/CategoryTheory/Limits/Types/Pullbacks.lean |
2 |
37 |
['dagurtomas', 'github-actions', 'jcreinhold', 'joelriou', 'mckoen'] |
nobody |
2-223 2 days ago |
50-14533 50 days ago |
95-64838 95 days |
| 41514 |
teorth author:teorth |
feat(Topology/MetricSpace/Heine-Cantor): metric ε-δ forms of Heine–Cantor |
Add (pseudo-)metric space (or "epsilon-delta") versions of many of the versions of the Heine-Cantor theorem (continuous functions on compacta are uniformly continuous) from `Topology.UniformSpace.HeineCantor` into a new file
`Topology.Metric.HeineCantor`. As per reviewer feedback, EMetric variants are also provided at `Topology.EMetric.HeineCantor`.
---
New files needed to be created because many files downstream of `Topology.UniformSpace.HeineCantor` blocked the use of `UniformOnFun`.
AI assistance was used to expand a small initial set of human-generated lemmas into a larger set, with the latter then reviewed by both an AI tool and myself.
[](https://gitpod.io/from-referrer/)
|
t-topology
maintainer-merge
|
161/0 |
Mathlib.lean,Mathlib/Topology/EMetricSpace/Defs.lean,Mathlib/Topology/EMetricSpace/HeineCantor.lean,Mathlib/Topology/MetricSpace/HeineCantor.lean |
4 |
14 |
['felixpernegger', 'github-actions', 'j-loreaux', 'teorth'] |
j-loreaux assignee:j-loreaux |
1-81293 1 day ago |
11-21141 11 days ago |
29-47803 29 days |
| 42193 |
sgouezel author:sgouezel |
chore: fix defeq abuse in the definition of MFDeriv |
---
- [x] depends on: ##42374
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
tech debt
|
136/58 |
Mathlib/Geometry/Manifold/ContMDiffMFDeriv.lean,Mathlib/Geometry/Manifold/IntegralCurve/UniformTime.lean,Mathlib/Geometry/Manifold/IsManifold/Basic.lean,Mathlib/Geometry/Manifold/LocalDiffeomorph.lean,Mathlib/Geometry/Manifold/MFDeriv/Atlas.lean,Mathlib/Geometry/Manifold/MFDeriv/Basic.lean,Mathlib/Geometry/Manifold/MFDeriv/Defs.lean,Mathlib/Geometry/Manifold/MFDeriv/FDeriv.lean,Mathlib/Geometry/Manifold/MFDeriv/Tangent.lean |
9 |
25 |
['github-actions', 'grunweg', 'kbuzzard', 'mathlib-bors', 'sgouezel'] |
nobody |
1-79359 1 day ago |
5-85371 5 days ago |
5-85469 5 days |
| 40473 |
karlesmarin author:karlesmarin |
feat(LinearAlgebra/Matrix): the Cauchy-Binet formula |
Adds the Cauchy–Binet formula. For `A : Matrix m n R` and `B : Matrix n m R` over a commutative ring, `det (A * B)` is the sum, over the `Fintype.card m`-element subsets `S` of `n`, of the product of the two maximal minors selected by `S`.
Main results:
* `Matrix.det_mul_eq_sum_det_submatrix_mul_prod` — the Leibniz-type expansion of `det (A * B)` over all index functions `g : m → n`.
* `Matrix.det_mul_cauchyBinet` — the Cauchy–Binet formula.
The proof expands over all `g : m → n`, discards the non-injective ones, and groups the rest by image.
|
|
212/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Matrix/Determinant/CauchyBinet.lean |
2 |
7 |
['github-actions', 'karlesmarin', 'mathlib-merge-conflicts', 'wwylele', 'yuanyi-350'] |
nobody |
1-78552 1 day ago |
1-79150 1 day ago |
46-82932 46 days |
| 28246 |
Sebi-Kumar author:Sebi-Kumar |
feat(AlgebraicTopology/FundamentalGroupoid): the n-sphere is simply connected for n > 1 |
Prove that the `n`-dimensional sphere (i.e., the unit sphere centered at the origin in `(n + 1)`-dimensional real Euclidean space) is a simply connected space for `n > 1`. This proof follows Hatcher's "Algebraic Topology"; we first prove a general lemma about decomposing loops and then exploit the fact that non-surjective loops in the sphere are homotopically trivial.
Note: To get this file to build, I edited `Mathlib/Tactic/Linter/DirectoryDependency.lean` to remove the restrictions on AlgebraicTopology files importing Geometry, NumberTheory, and FieldTheory files. Thank you to those who shared their expertise [here](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Warning.20that.20AlgebraicTopology.20can't.20import.20SetTheory/with/533833638). As I understand it, this is just a short-term solution, so I would appreciate feedback on what to do about this situation.
Note: I am unsure where exactly the file `SimplyConnectedSphere.lean` should go or whether that is an appropriate name for the file, so feedback there would be appreciated.
---
To provide additional context, this code was written as a part of the Fields Undergraduate Summer Research Program at the University of Western Ontario under the supervision of Chris Kapulkin and Daniel Carranza.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #28208
- [x] depends on: #28198
- [x] depends on: #28185
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
new-contributor
|
371/3 |
Mathlib.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/SimplyConnectedSphere.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/VanKampen.lean,Mathlib/Logic/Equiv/PartialEquiv.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean,Mathlib/Topology/Path.lean |
6 |
19 |
['Sebi-Kumar', 'dagurtomas', 'github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'robin-carlier'] |
dagurtomas assignee:dagurtomas |
1-67858 1 day ago |
24-4302 24 days ago |
37-82556 37 days |
| 38009 |
CBirkbeck author:CBirkbeck |
feat(RingTheory/Valuation): define the valuation spectrum and its topology |
## Summary
Define the valuation spectrum `Spv A` of a commutative ring and equip it with the topology generated by basic open sets, following Wedhorn's *Adic Spaces*. Also define the pullback (`comap`) of a `ValuativeRel` along a ring homomorphism. This is preparation for later defining adic spaces.
Note the code was generated by claude code, but I have cleaned up and pre-reviewed the work.
|
t-ring-theory
LLM-generated
|
400/0 |
Mathlib.lean,Mathlib/RingTheory/Valuation/ValuationSpectrum.lean,Mathlib/RingTheory/Valuation/ValuativeRel/Comap.lean |
3 |
73 |
['CBirkbeck', 'adamtopaz', 'chrisflav', 'dagurtomas', 'faenuccio', 'github-actions', 'jjdishere', 'riccardobrasca', 'sfingali'] |
jjdishere assignee:jjdishere |
1-67857 1 day ago |
25-41301 25 days ago |
110-15000 110 days |
| 39588 |
jvanwinden author:jvanwinden |
feat(MeasureTheory/Measure/ProbabilityMeasure): add toProbabilityMeasure and basic API |
Introduces `Measure.toProbabilityMeasure`, which converts a `Measure` into a `ProbabilityMeasure` in the presence of the typeclass assumption `[IsProbabilityMeasure]`. Some basic API is added for the interaction between `toProbabilityMeasure` and the coercion from `ProbabilityMeasure` to `Measure`. The main convenience is that the new method allows for dot notation on `Measure`.
This PR arose from the following situation: I needed to prove equality of two `Measure` objects, and I wanted to do this by using uniqueness of limits. But the topology of weak convergence is only defined on `ProbabilityMeasure` and not on `Measure`. With the new lemma `toProbabilityMeasure_inj`, an equality of measures can easily be rewritten into an equality of the corresponding probability measures, after which `tendsto_nhds_unique` can be applied.
Aside from this, `toProbabilityMeasure` has the potential to simplify theorem statements about `Measure` objects which use the topology of weak convergence either in the assumptions or the conclusion. For example, now one can simply write `Tendsto μ.toProbabilityMeasure f (nhds μ_lim.toProbabilityMeasure)` when appropriate `[IsProbabilityMeasure]` assumptions are present.
This PR is intended as a starting point for a discussion. I only added some basic API, but perhaps more lemmas should be added (which ones?). Also, a similar definition could be made for `FiniteMeasure`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
20/2 |
Mathlib/MeasureTheory/Measure/ProbabilityMeasure.lean |
1 |
2 |
['EtienneC30', 'github-actions'] |
RemyDegenne assignee:RemyDegenne |
1-67856 1 day ago |
80-1554 80 days ago |
80-1542 80 days |
| 41146 |
joelriou author:joelriou |
feat(CategoryTheory/Limits): weighted limits commute with (co)limits in the weight variable |
This is an adaptation of code from https://github.com/joelriou/reedy in order to allow uses both for Reedy categories and applications to hypercovers #41125. In particular, the proof of the preservations of limits with respect to the weight variable (which was obtained in https://github.com/joelriou/reedy in the most favourable case) is proven here in a similar manner as in #41125.
Co-authored-by: Yun Liu
- [x] depends on: #41163
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
267/0 |
Mathlib.lean,Mathlib/CategoryTheory/Limits/Weighted/HasWeightedLimit.lean,Mathlib/CategoryTheory/Limits/Weighted/PreservesLimit.lean,Mathlib/CategoryTheory/ObjectProperty/Equivalence.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
robin-carlier assignee:robin-carlier |
1-67855 1 day ago |
35-80103 35 days ago |
35-82808 35 days |
| 41203 |
grunweg author:grunweg |
feat: post-composing an immersion with a diffeomorphism yields an immersion |
Use this to golf the proof that `Sum.inr` is a smooth embedding: requested by `@chrisflav` in #40507.
This lemma is a special case of "the composition of immersions is an immersion"; the latter requires additional hypotheses (such as, on behaviour near the boundary or about the manifold being modeled on a Banach space). This statement does not require any such hypotheses.
---
- [x] depends on: #40720
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
51/12 |
Mathlib/Geometry/Manifold/Immersion.lean |
1 |
6 |
['github-actions', 'grunweg', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
sgouezel assignee:sgouezel |
1-67854 1 day ago |
13-40067 13 days ago |
20-29450 20 days |
| 41734 |
IlPreteRosso author:IlPreteRosso |
feat(DiscreteConvolution): add ring convolution definitions and properties |
Continuation of PR #34191
Adds ring convolution and its elementary properties.
Aligns the API with [Day convolution](https://leanprover-community.github.io/mathlib4_docs/Mathlib/CategoryTheory/Monoidal/DayConvolution.html) structure. Although no idea how to bridge them right now. |
t-topology
new-contributor
|
222/5 |
Mathlib/Topology/Algebra/InfiniteSum/DiscreteConvolution.lean |
1 |
3 |
['github-actions', 'grunweg'] |
j-loreaux assignee:j-loreaux |
1-67852 1 day ago |
24-22232 24 days ago |
24-22220 24 days |
| 42261 |
D-Thomine author:D-Thomine |
chore(MeasureTheory): using ENNReal instead of NNReal |
With this PR, I test what can be gained by removing coercions in measure theory (i.e. working directly with `ENNReal` instead of working with `NNReal` and coercing), focusing on `MeasureTheory.Covering.Differentiation`. Overall, it looks a bit shorter and a more legible.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
166/205 |
Mathlib/MeasureTheory/Constructions/BorelSpace/Order.lean,Mathlib/MeasureTheory/Covering/Differentiation.lean,Mathlib/MeasureTheory/Function/AEMeasurableOrder.lean,Mathlib/MeasureTheory/Measure/Typeclasses/Finite.lean |
4 |
5 |
['D-Thomine', 'github-actions', 'grunweg', 'leanprover-radar'] |
urkud assignee:urkud |
1-67851 1 day ago |
8-12212 8 days ago |
8-12200 8 days |
| 42376 |
JJYYY-JJY author:JJYYY-JJY |
feat(MeasureTheory): add RCLike integrability equivalences for real-valued functions |
Continues from https://github.com/leanprover-community/mathlib4/pull/17176, I merged it into current main and implement with previous comments.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
new-contributor
|
31/0 |
Mathlib/MeasureTheory/Function/L1Space/Integrable.lean,Mathlib/MeasureTheory/Integral/IntegrableOn.lean |
2 |
3 |
['github-actions'] |
EtienneC30 assignee:EtienneC30 |
1-67850 1 day ago |
5-5528 5 days ago |
5-5531 5 days |
| 42404 |
Robertboy18 author:Robertboy18 |
chore(downstream_repos): add TorchLean |
This PR adds [TorchLean](https://github.com/lean-dojo/TorchLean) to `scripts/downstream_repos.yml`!
TorchLean is the first unified Lean 4 framework for neural-network specification,
execution, training, and formal verification. It depends on Mathlib and maintains
build and documentation workflows on its default branch! Let me know if something else is needed:)
|
CI
new-contributor
|
7/0 |
scripts/downstream_repos.yml |
1 |
2 |
['copilot-pull-request-reviewer', 'github-actions'] |
nobody |
1-67238 1 day ago |
1-67244 1 day ago |
1-67232 1 day |
| 41258 |
ungatz author:ungatz |
feat(Analysis/Fourier/FiniteAbelian): add the Donoho-Stark support uncertainty principle |
This adds the Donoho–Stark support uncertainty inequality for the unitary Fourier transform on a finite abelian group, plus the supporting Fourier-inversion machinery indexed by the Pontryagin dual `AddChar G ℂ`.
The headline:
> **Theorem `AddChar.donoho_stark`.** For nonzero `f : G → ℂ`,
> `Fintype.card G ≤ (support f).ncard * (support (fourierTransform f)).ncard`,
> where `fourierTransform f ψ = |G|^(-1/2) * ∑ g, conj (ψ g) * f g` ranges over `ψ : AddChar G ℂ`.
The proof is the elementary (L¹, L∞) duality argument that any harmonic-analysis textbook gives for the classical `ZMod N` case; no Parseval or Cauchy–Schwarz is needed. The finite-abelian generalisation is folklore (stated in Tao–Vu *Additive Combinatorics* and Terras *Fourier Analysis on Finite Groups*); I did not find it formalised in Mathlib or any other major library.
### Why this belongs in Mathlib
Mathlib already has the supporting infrastructure — character theory of finite abelian groups (`Mathlib.Algebra.Group.AddChar`), character orthogonality and Pontryagin duality (`Mathlib.Analysis.Fourier.FiniteAbelian.{Orthogonality, PontryaginDuality}`). The Donoho–Stark inequality is the canonical application of all three, and its absence is a real gap: I needed it for a downstream operator-uncertainty result (a diagonal-operator `rank * Pauli-support` bound on the finite Heisenberg group reduces to it) and ended up proving it from scratch. Beyond that use, it is a standard tool in compressed sensing on finite abelian groups, additive combinatorics, and discrete signal recovery (the 1989 paper has ~3500 citations).
### What's in this PR
A single new file, `Mathlib/Analysis/Fourier/FiniteAbelian/DonohoStark.lean`:
- `AddChar.fourierTransform` — the unitary (symmetric) Fourier transform indexed by `AddChar G ℂ`;
- `AddChar.fourier_inversion` — the inversion formula;
- `AddChar.norm_fourierTransform_le`, `AddChar.norm_le_sum_norm_fourierTransform` — the two `L∞ ≤ |G|^(-1/2) · L¹` triangle bounds;
- `AddChar.donoho_stark` — the support uncertainty inequality.
Design choices I expect questions on, and my defaults:
- **`ℂ` rather than `RCLike`**: matches the cited literature and the cleanest home of `AddChar.norm_apply`; happy to generalise if preferred.
- **`Set.ncard` for support sizes**: avoids needing `DecidableEq ℂ` in the statement.
- **A new sibling file** of `Orthogonality.lean` / `PontryaginDuality.lean` rather than a subsection: orthogonality is the tool, Donoho–Stark is the application; can inline if preferred.
Deliberately *not* included: the diagonal-operator `rank * Pauli-support ≥ 2^n` corollary from my workspace — the Pauli-word machinery has no natural home in `Analysis/Fourier` yet; happy to factor it into a follow-up if there is interest.
### AI usage disclosure
Per the [AI contribution policy](https://leanprover-community.github.io/contribute/index.html): the original Lean proof was generated by **Aristotle** (Harmonic AI's automated proof system) from a dispatch containing the statement and the (L¹, L∞) proof strategy, as part of my PhD research workspace. I audited the delivery line by line against Donoho–Stark 1989 (the dispatch also produced a kernel-checked counterexample to a tempting wrong variant — replacing rank by the count of distinct eigenvalues — which the 2×2 identity falsifies). The file here is my adaptation to Mathlib conventions and to current master (module system, `Set.ncard` statement, robust cast handling in the inversion proof), with final tactic-level repairs done with the assistance of Claude (Anthropic). I understand and can defend every line without AI assistance. Please add the `LLM-generated` label (I cannot set labels myself).
### Test plan
- [x] `lake build Mathlib.Analysis.Fourier.FiniteAbelian.DonohoStark` clean (0 errors, 0 warnings).
- [x] `#print axioms` on all five declarations: `[propext, Classical.choice, Quot.sound]`.
- [x] `lake exe lint-style` clean; all lines ≤ 100 chars.
- [x] `Mathlib.lean` updated in alphabetical position.
- [x] Imports minimal (`PontryaginDuality` + `RCLike.Basic` only).
### Reference
Donoho, D. L. and Stark, P. B. (1989). *Uncertainty principles and signal recovery.* SIAM Journal on Applied Mathematics, **49**(3): 906–931. https://doi.org/10.1137/0149053
---
|
t-analysis
new-contributor
LLM-generated
|
283/0 |
Mathlib.lean,Mathlib/Analysis/Fourier/FiniteAbelian/DonohoStark.lean |
2 |
4 |
['YaelDillies', 'copilot-pull-request-reviewer', 'felixpernegger', 'github-actions'] |
nobody |
1-66975 1 day ago |
36-73554 36 days ago |
36-73542 36 days |
| 40266 |
WangJiabai author:WangJiabai |
feat(RingTheory/MvPolynomial): define generic determinantal ideals |
This PR adds a foundational API for determinantal ideals of the generic matrix.
It defines `Matrix.MinorIndex`, the corresponding minors of the existing generic
matrix `Matrix.mvPolynomialX`, the finite set of all `t × t` generic minors, and
the ideal generated by these minors in `MvPolynomial (Fin m × Fin n) R`.
It also proves basic membership, evaluation, coefficient-map/base-change, and
finite-generation lemmas.
This PR intentionally does not include the Sturmfels/KRS/straightening/Groebner
part of the development.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Additional context:
This is extracted and refactored from a standalone project on determinantal
ideals and the Gröbner-basis theorem for generic determinantal ideals:
https://github.com/WangJiabai/Determinantal-Ideals-Formalization
The current PR is intentionally limited to the small foundational API for
generic minors and generic determinantal ideals.
AI use:
ChatGPT was used for planning/refactoring discussion, and Codex was used to
draft some proof scripts. I reviewed the statements and proofs and am
responsible for the submitted code.
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
LLM-generated
|
227/0 |
Mathlib.lean,Mathlib/RingTheory/MvPolynomial/DeterminantalIdeal.lean |
2 |
3 |
['WangJiabai', 'github-actions'] |
nobody |
1-66974 1 day ago |
63-10060 63 days ago |
63-10048 63 days |
| 36428 |
wrenna-robson author:wrenna-robson |
feat(Logic/Equiv/Fin): Streamline equiv definitions using mkDivMod |
This PR uses Fin.mkDivMod to streamline the related equivalence and introduces Nat.mkDivMod to a similar end.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
64/67 |
Mathlib/Analysis/SpecialFunctions/Complex/Arctan.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Series.lean,Mathlib/Data/Nat/Init.lean,Mathlib/Logic/Equiv/Fin/Basic.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/Order/Partition/Equipartition.lean |
6 |
6 |
['JovanGerb', 'github-actions', 'mathlib-merge-conflicts', 'wrenna-robson'] |
nobody |
1-66973 1 day ago |
23-36028 23 days ago |
50-76757 50 days |
| 42426 |
mcdoll author:mcdoll |
chore(LinearAlgebra/LinearPMap): use `grind` and other golfs |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
63/106 |
Mathlib/LinearAlgebra/LinearPMap.lean |
1 |
7 |
['chenson2018', 'github-actions', 'leanprover-radar', 'mcdoll', 'yuanyi-350'] |
nobody |
1-63850 1 day ago |
1-65568 1 day ago |
2-2030 2 days |
| 42364 |
vihdzp author:vihdzp |
chore(Order/LatticeIntervals): use `to_dual` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #42362
[](https://gitpod.io/from-referrer/)
|
t-order |
77/177 |
Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/Lattice.lean,Mathlib/Order/LatticeIntervals.lean,Mathlib/Order/ModularLattice.lean |
4 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
1-61115 1 day ago |
1-61118 1 day ago |
1-62720 1 day |
| 42288 |
yuanyi-350 author:yuanyi-350 |
feat(PowerSeries): if `P.subst Q = X`, then `Q.subst P = X` |
used in #37848
This adds a small helper for compositional inverses of power series.
If `P.constantCoeff = 0`, `coeff 1 P` is a unit, and `P.subst Q = X`, then `Q.subst P = X`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
easy
|
15/0 |
Mathlib/RingTheory/PowerSeries/Substitution.lean |
1 |
2 |
['bocowgill', 'github-actions'] |
nobody |
1-60169 1 day ago |
8-10351 8 days ago |
8-10339 8 days |
| 27493 |
themathqueen author:themathqueen |
feat(RingTheory): define Frobenius equations (`Coalgebra.IsFrobenius`) |
A coalgebra with an algebra structure `A` is said to be Frobenius when it satisfies the Frobenius equation:
`(id ⊗ mul) ∘ assoc ∘ (comul ⊗ id) = comul ∘ mul = (mul ⊗ id) ∘ assoc.symm ∘ (id ⊗ comul)`,
which in diagrams looks like
```
| | | |
| μ | | μ |
| / \ \ / / \ |
\ / | = δ ∘ μ = | \ /
δ | / \ | δ
| | | | | |
```
where `μ` stands for multiplication and `δ` for comultiplication.
It suffices to show that the left and right diagrams are equal, i.e.,
`(id ⊗ mul) ∘ assoc ∘ (comul ⊗ id) = (mul ⊗ id) ∘ assoc.symm ∘ (id ⊗ comul)`, so this is the only equality in the class.
Because of how long and complicated the names would be, we add abbreviations for the left and right equations, `IsFrobenius.left` and `IsFrobenius.right`. So the Frobenius equation is literally `left_eq_right : IsFrobenius.left = IsFrobenius.right`.
A Frobenius coalgebra is necessarily finite and projective. Also, the bilinear form `(LinearMap.mul R A).compr₂ counit` is nondegenerate and bijective.
A `Bialgebra R A` that is Frobenius must have `R` isomorphic to `A`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #27567
- [x] depends on: #27569
- [x] depends on: #32245
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
265/0 |
Mathlib.lean,Mathlib/RingTheory/Coalgebra/IsFrobenius.lean |
2 |
38 |
['JonBannon', 'Julian-Kuelshammer', 'YaelDillies', 'erdOne', 'github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'riccardobrasca', 'themathqueen', 'wwylele'] |
riccardobrasca assignee:riccardobrasca |
1-58502 1 day ago |
16-1829 16 days ago |
119-43834 119 days |
| 41640 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in GroupTheory.GroupAction |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 6 file(s) in **GroupTheory.GroupAction**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-group-theory
|
50/28 |
Mathlib/GroupTheory/GroupAction/Blocks.lean,Mathlib/GroupTheory/GroupAction/FixingSubgroup.lean,Mathlib/GroupTheory/GroupAction/Hom.lean,Mathlib/GroupTheory/GroupAction/MultipleTransitivity.lean,Mathlib/GroupTheory/GroupAction/Pointwise.lean,Mathlib/GroupTheory/GroupAction/SubMulAction.lean |
6 |
1 |
['github-actions'] |
nobody |
1-54142 1 day ago |
26-18467 26 days ago |
26-18455 26 days |
| 41644 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Algebra (BigOperators, Order, ...) |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 16 file(s) in **Algebra (BigOperators, Order, ...)**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated |
68/40 |
Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/BigOperators/Group/Finset/Defs.lean,Mathlib/Algebra/BigOperators/Group/Finset/Piecewise.lean,Mathlib/Algebra/BigOperators/Group/Finset/Sigma.lean,Mathlib/Algebra/FreeMonoid/Basic.lean,Mathlib/Algebra/Module/PUnit.lean,Mathlib/Algebra/MonoidAlgebra/Module.lean,Mathlib/Algebra/Order/Antidiag/Prod.lean,Mathlib/Algebra/Order/Group/Finset.lean,Mathlib/Algebra/Order/Group/Unbundled/Basic.lean,Mathlib/Algebra/Order/Hom/Monoid.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Pow.lean,Mathlib/Algebra/Regular/Basic.lean,Mathlib/Algebra/Torsor/Basic.lean,Mathlib/Order/Filter/AtTopBot/Monoid.lean |
16 |
1 |
['github-actions'] |
nobody |
1-54014 1 day ago |
25-29731 25 days ago |
25-29719 25 days |
| 42483 |
bocowgill author:bocowgill |
feat(Analysis/InnerProductSpace/Projection): characterize joint minimizers via infDist |
This PR adds two results about minimization and orthogonal projection onto a subspace.
- `Submodule.norm_starProjection_orthogonal_eq_infDist` identifies the norm of the projection onto `Uᗮ` with the point-to-set distance `Metric.infDist y U`.
- `Submodule.exists_forall_norm_sub_le_iff_forall_infDist_le` characterizes when a point `a : E` can be paired with some `u : U` such that their distance is no greater than the distance between any pair in `A × U`. This is possible precisely when `Metric.infDist a U ≤ Metric.infDist a' U` for every `a' : A`.
The second theorem is stated using a comparison set rather than a particular parameterization. Specializing
`A = Set.range (fun z' ↦ y - f z')`
and
`a = y - f z`
recovers the abstract partialling-out principle underlying the Frisch–Waugh–Lovell theorem.
---
### Motivation
These lemmas extend Mathlib's inner-product-space projection API for partial minimization over a subspace.
- The first result connects the norm of an orthogonal residual with Mathlib's canonical point-to-set distance.
- The second shows that the subspace variable can be profiled out: joint optimization against points of `U` reduces to minimizing `Metric.infDist · U` over the remaining comparison set.
This geometric formulation is intended to support later formalizations of least squares, regression, and partialling-out arguments while remaining independent of any particular parameterization of the comparison set.
### LLM disclosure
For theorem planning and Lean implementation, I used OpenAI Codex substantially. I also used it for suggestions around naming and documentation, for iterating on the proofs, responding to review feedback, and validating my commits locally.
I manually searched for the best locations and earlier results to build upon. I personally reviewed both the mathematical statements and Lean code line-by-line, as well as the suggestions around naming and API choices. I also reviewed and confirmed that I can explain each step of the two theorems' proofs.
For the current revision, I ran a targeted build of `Mathlib.Analysis.InnerProductSpace.Projection.Basic`, the style linter, and the environment linter. I performed a `git diff --check`. I also inspected the inferred declaration signatures and axiom dependencies, and compiled a scratch proof recovering the original regression-parameterized statement from the new set-based theorem. Earlier in development, before the reviewer-driven refactor, I also completed a full `lake build` and a full `lake test`.
Please note: This is one of my earliest Mathlib contributions. I welcome corrections or suggestions about all aspects of this PR. I'm prepared to revise it as necessary and to learn from the review. |
t-analysis
LLM-generated
new-contributor
|
59/0 |
Mathlib/Analysis/InnerProductSpace/Projection/Basic.lean |
1 |
7 |
['bocowgill', 'github-actions', 'wwylele'] |
nobody |
1-53322 1 day ago |
1-64457 1 day ago |
1-64445 1 day |
| 42475 |
kebekus author:kebekus |
feat: establish the Poisson-Jensen formula |
Establish the classic Poisson-Jensen formula of complex analysis, which generalizes the Jensen formula.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
LLM-generated
|
160/10 |
Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/Complex/Poisson.lean |
2 |
1 |
['github-actions'] |
nobody |
1-50063 1 day ago |
1-50649 1 day ago |
2-27093 2 days |
| 42485 |
vlad902 author:vlad902 |
feat(LocalRing): add `IsLocalRing` instance for `MulOpposite` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
6/0 |
Mathlib/RingTheory/LocalRing/Basic.lean |
1 |
3 |
['eric-wieser', 'github-actions', 'vlad902'] |
nobody |
1-44099 1 day ago |
1-52247 1 day ago |
1-52235 1 day |
| 41303 |
kebekus author:kebekus |
feat: Invariance of meromorphicity under scaling |
Prove that various notions associated with meromorphic functions are invariant under scaling. Add several missing `fun_prop` tags and normalize comments.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
182/101 |
Mathlib/Analysis/Analytic/Constructions.lean,Mathlib/Analysis/Meromorphic/Basic.lean,Mathlib/Analysis/Meromorphic/Divisor.lean,Mathlib/Analysis/Meromorphic/NormalForm.lean,Mathlib/Analysis/Meromorphic/Order.lean |
5 |
1 |
['github-actions'] |
nobody |
1-43100 1 day ago |
1-43100 1 day ago |
1-43088 1 day |
| 42448 |
Whysoserioushah author:Whysoserioushah |
chore(Algebra/Homology/HomotopyCategory/Shift): clean up most of set_options |
If we want every `set_option` gone from this file, especially gone from this instance: `CategoryTheory.Functor.commShiftMapCochainComplex` then we need to set the reducibility of `Functor.mapHomologicalComplex` into reducible, this together with [ContCohomology](https://github.com/leanprover-community/mathlib4/blob/master/Mathlib/RepresentationTheory/Homological/ContCohomology/Basic.lean#L109) may indicate that we want it as an `abbrev`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
t-category-theory
label:t-algebra$ |
75/206 |
Mathlib/Algebra/Homology/HomotopyCategory/DegreewiseSplit.lean,Mathlib/Algebra/Homology/HomotopyCategory/HomComplexShift.lean,Mathlib/Algebra/Homology/HomotopyCategory/Pretriangulated.lean,Mathlib/Algebra/Homology/HomotopyCategory/Shift.lean,Mathlib/Algebra/Homology/HomotopyCategory/Triangulated.lean |
5 |
9 |
['Whysoserioushah', 'github-actions', 'joelriou', 'leanprover-radar'] |
riccardobrasca assignee:riccardobrasca |
1-42287 1 day ago |
2-27983 2 days ago |
2-32704 2 days |
| 42482 |
SauersML author:SauersML |
feat(Probability/Decision): add data processing inequalities for minimax risk |
This PR adds the minimax analogs of the three data processing inequalities for the Bayes risk in Mathlib.Probability.Decision.Risk.Basic.
It is similar to the compositions section in PR #29143, but with minimax.
-----------
Claude Fable 5 wrote the code and GPT 5.6 Sol reviewed the code. This was written for a different project, and I identified this as a candidate for upstreaming into Mathlib.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
LLM-generated
new-contributor
|
31/0 |
Mathlib/Probability/Decision/Risk/Basic.lean |
1 |
3 |
['SauersML', 'github-actions'] |
nobody |
1-39556 1 day ago |
1-64695 1 day ago |
1-64683 1 day |
| 41177 |
mcdoll author:mcdoll |
feat(MeasureTheory): use `IsApply` for `Measure` |
---
Sorry, I messed up a merge and the old PR went weird.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
177/203 |
Mathlib/Analysis/InnerProductSpace/NormDet.lean,Mathlib/Dynamics/Ergodic/Extreme.lean,Mathlib/Geometry/Euclidean/Volume/Measure.lean,Mathlib/MeasureTheory/Constructions/Pi.lean,Mathlib/MeasureTheory/Covering/Differentiation.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Function/SimpleFunc.lean,Mathlib/MeasureTheory/Group/FundamentalDomain.lean,Mathlib/MeasureTheory/Group/Prod.lean,Mathlib/MeasureTheory/Integral/Average.lean,Mathlib/MeasureTheory/Integral/Bochner/Basic.lean,Mathlib/MeasureTheory/Integral/Bochner/L1.lean,Mathlib/MeasureTheory/Integral/FinMeasAdditive.lean,Mathlib/MeasureTheory/Integral/SetToL1.lean,Mathlib/MeasureTheory/Measure/AEMeasurable.lean,Mathlib/MeasureTheory/Measure/AbsolutelyContinuous.lean,Mathlib/MeasureTheory/Measure/Decomposition/Exhaustion.lean,Mathlib/MeasureTheory/Measure/Decomposition/IntegralRNDeriv.lean,Mathlib/MeasureTheory/Measure/Decomposition/Lebesgue.lean,Mathlib/MeasureTheory/Measure/Dirac.lean,Mathlib/MeasureTheory/Measure/FiniteMeasure.lean,Mathlib/MeasureTheory/Measure/GiryMonad.lean,Mathlib/MeasureTheory/Measure/Haar/Basic.lean,Mathlib/MeasureTheory/Measure/Haar/DistribChar.lean,Mathlib/MeasureTheory/Measure/Haar/MulEquivHaarChar.lean,Mathlib/MeasureTheory/Measure/Hausdorff.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Measure/Lebesgue/EqHaar.lean,Mathlib/MeasureTheory/Measure/Map.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/MutuallySingular.lean,Mathlib/MeasureTheory/Measure/ProbabilityMeasure.lean,Mathlib/MeasureTheory/Measure/Prod.lean,Mathlib/MeasureTheory/Measure/Prokhorov.lean,Mathlib/MeasureTheory/Measure/Regular.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/MeasureTheory/Measure/Stieltjes.lean,Mathlib/MeasureTheory/Measure/Sub.lean,Mathlib/MeasureTheory/Measure/SubFinite.lean,Mathlib/MeasureTheory/Measure/Tilted.lean,Mathlib/MeasureTheory/Measure/Typeclasses/Finite.lean,Mathlib/MeasureTheory/Measure/Typeclasses/SFinite.lean,Mathlib/MeasureTheory/Measure/WithDensity.lean,Mathlib/MeasureTheory/Measure/WithDensityFinite.lean,Mathlib/MeasureTheory/VectorMeasure/Decomposition/Jordan.lean,Mathlib/MeasureTheory/VectorMeasure/Integral.lean,Mathlib/MeasureTheory/VectorMeasure/Prod.lean,Mathlib/MeasureTheory/VectorMeasure/Variation/Basic.lean,Mathlib/MeasureTheory/VectorMeasure/Variation/SignedMeasure.lean,Mathlib/Probability/ConditionalProbability.lean,Mathlib/Probability/Distributions/Bernoulli.lean,Mathlib/Probability/Distributions/Binomial.lean,Mathlib/Probability/Distributions/Uniform.lean,Mathlib/Probability/Kernel/Composition/Comp.lean,Mathlib/Probability/Kernel/Composition/CompProd.lean,Mathlib/Probability/Kernel/Defs.lean,Mathlib/Probability/Kernel/RadonNikodym.lean,Mathlib/Probability/UniformOn.lean |
58 |
22 |
['github-actions', 'grunweg', 'j-loreaux', 'mathlib-merge-conflicts', 'mcdoll'] |
grunweg assignee:grunweg |
1-38234 1 day ago |
1-38234 1 day ago |
31-31633 31 days |
| 42034 |
grunweg author:grunweg |
chore(Geometry/Manifold): remove "easy" cases of defeq abuse |
Remove many uses of the `backward.isDefeq.respectTransparency` option in differential geometry.
- a number of options are simply superfluous now (hence can be removed)
- some cases could be fixed by adding `chartAt_self_eq` to a simp call --- should this be made simp?
- using `NormedSpace.fromTangentSpace` and `mvfderiv` allowed fixing a few options in `VectorBundle/Riemannian`
- a few proofs simply needed to be slightly more careful, and then also worked without the defeq abuse
---
- [x] depends on: #42031
- [x] depends on: #42038
Best reviewed commit by commit: the individual commit messages contain slightly more detail.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
tech debt
|
21/34 |
Mathlib/Geometry/Manifold/ContMDiff/Atlas.lean,Mathlib/Geometry/Manifold/ContMDiff/Basic.lean,Mathlib/Geometry/Manifold/IsManifold/Basic.lean,Mathlib/Geometry/Manifold/IsManifold/ExtChartAt.lean,Mathlib/Geometry/Manifold/MFDeriv/NormedSpace.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/Geometry/Manifold/Riemannian/Basic.lean |
7 |
3 |
['github-actions', 'grunweg', 'mathlib-dependent-issues'] |
nobody |
1-37695 1 day ago |
9-81277 9 days ago |
10-84811 10 days |
| 37232 |
mathlib-splicebot author:mathlib-splicebot |
chore(Algebra/Order): bound on `|n / m|ₘ` and `|n - m|` |
This PR was automatically created from PR #34722 by @GrigorenkoPV via a [review comment](https://github.com/leanprover-community/mathlib4/pull/34722#discussion_r2996870566) by @Vierkantor. |
t-algebra
maintainer-merge
label:t-algebra$ |
5/0 |
Mathlib/Algebra/Order/Group/Unbundled/Abs.lean |
1 |
14 |
['Vierkantor', 'bryangingechen', 'github-actions', 'grunweg', 'mathlib-bors', 'themathqueen'] |
nobody |
1-37536 1 day ago |
7-18398 7 days ago |
44-51978 44 days |
| 41121 |
Scarlett-le author:Scarlett-le |
feat(Geometry/Euclidean/Angle): add the Alternate segment theorem |
Adds the Alternate segment theorem to`Mathlib/Geometry/Euclidean/Angle/Sphere.lean`:
if a line is tangent to a sphere `s` at `p₁`
and `p₁`, `p₂`, `p₃` lie on `s`, then twice the oriented angle from the tangent to the chord
`p₁p₂` equals twice the inscribed angle subtending `p₁p₂` at `p₃`. As elsewhere in this file,
the angles are doubled because the underlying oriented angles agree only mod `π`.
----
- [x] depends on: #41143 |
t-euclidean-geometry
maintainer-merge
|
27/0 |
Mathlib/Geometry/Euclidean/Angle/Sphere.lean |
1 |
7 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
1-37524 1 day ago |
36-59638 36 days ago |
39-18480 39 days |
| 42044 |
wwylele author:wwylele |
feat(GroupTheory/Sylow): a tower of subgroup exists |
This is a pretty trivial corollary but tedious to write formally, so let's provide it for convenience. My recent application of this is to show that a Galois extension of degree `2 ^ n` consists of a tower of quadratic extensions, and with this I can avoid doing too much induction with field theory.
I also took some liberties in the naming, as the one strictly following the statement would be long and obscure.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
95/0 |
Mathlib/Algebra/Group/Subgroup/Finite.lean,Mathlib/GroupTheory/Sylow.lean |
2 |
22 |
['SnirBroshi', 'copilot-pull-request-reviewer', 'github-actions', 'tb65536', 'wwylele'] |
nobody |
1-37110 1 day ago |
1-64084 1 day ago |
10-38059 10 days |
| 42490 |
kebekus author:kebekus |
chore: add `to_fun` tag to theorems on logarithmic derivations |
Following a discussion with @j-loreaux, add `to_fun` tag to theorems on logarithmic derivations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
17/15 |
Mathlib/Analysis/Calculus/LogDeriv.lean,Mathlib/Analysis/Calculus/LogDerivUniformlyOn.lean,Mathlib/Analysis/Meromorphic/LogDeriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Cotangent.lean,Mathlib/NumberTheory/ModularForms/DedekindEta.lean,Mathlib/NumberTheory/ModularForms/Discriminant.lean |
6 |
1 |
['github-actions'] |
nobody |
1-36574 1 day ago |
1-36587 1 day ago |
1-36575 1 day |
| 42489 |
mo271 author:mo271 |
feat(Data/Finset/Powerset): `powersetCard_inter` and `disjoint_powers… |
…etCard_powersetCard`
Add `Finset.powersetCard_inter` and `Finset.disjoint_powersetCard_powersetCard`, and tag `Finset.powersetCard_mono` with `@[gcongr]`.
Ported from Formal Conjecture's ForMathlib, original PR is https://github.com/google-deepmind/formal-conjectures/pull/1428.
Co-authored-by: Yaël Dillies <yael.dillies@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
9/1 |
Mathlib/Data/Finset/Powerset.lean |
1 |
1 |
['github-actions'] |
nobody |
1-34869 1 day ago |
1-37492 1 day ago |
1-37480 1 day |
| 41485 |
luigi-massacci author:luigi-massacci |
feat: multiplication by a regular function in D^n as a CLM (bilin version) |
Preliminary lemma for multiplication of a classical distribution by a regular function (PR #41634).
The `def` is mutatis mutandis the exact same construction as the existing `ContDiffMapSupportedin.fderivCLM`-> `TestFunction.fderivCLM` topology-wise, and algebra-wise it mirrors the existing API for `TemperedDistribution` (`simp` lemma included).
Note that this is a helper definition not meant to be used directly, hence the regularity assumption in the type for simplicity, as in the existing `ContDiffMapSupprotedIn.bilinLefCLM`. The consumer definitions (`TestFunction.smul`in PR #41531 and `Distribution.smul` in #41634) take junk values instead.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41324
[](https://gitpod.io/from-referrer/)
|
t-analysis
easy
|
34/2 |
Mathlib/Analysis/Distribution/ContDiffMapSupportedIn.lean,Mathlib/Analysis/Distribution/TestFunction.lean |
2 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
1-34444 1 day ago |
1-38161 1 day ago |
1-56008 1 day |
| 42447 |
lua-vr author:lua-vr |
chore(Dynamics/BirkhofSum): improve naming of birkhoffSum and birkhoffAverage lemmas |
Before, those two files used apostrophes `'` for discerning the point-free or applied lemmas in a non-consistent way. I changed the naming to use `_apply` for the applied versions. (See some discussion about that on https://github.com/leanprover-community/mathlib4/pull/35402.)
For `birkhoffSum`, the `birkhoffSum_add` and `birkhoffSum_add'` lemma names were inconsistent with `birkhoffSum_sub` and the analogous lemmas in the `BirkhoffAverage` file. `_add` is now function addition `g + g'`, and `_add'` is now index addition `m + n`.
Another cases of inconsistency was that the `n` was sometimes present in in the non-applied version, sometimes not. I changed it to generalize the `n` (not mention it) in the non-applied when sensible.
I also added some missing non-applied versions.
I did not add deprecation aliases as there are currently no other files using those lemmas, and since many names are swapped I'm not sure if adding deprecations is even possible.
AI was used for the refactors, iteratively reviewed by me.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-dynamics |
128/46 |
Mathlib/Dynamics/BirkhoffSum/Average.lean,Mathlib/Dynamics/BirkhoffSum/Basic.lean |
2 |
4 |
['github-actions', 'lua-vr', 'mcdoll'] |
ADedecker and mcdoll assignee:mcdoll assignee:ADedecker |
1-34251 1 day ago |
1-34746 1 day ago |
2-58641 2 days |
| 40904 |
jiangf13 author:jiangf13 |
chore(Algebra/Group/WithOne): remove stale TODO |
The TODO claimed that `WithOne.coe_mul` and `WithZero.coe_mul` have inconsistent implicit parameters. Their current signatures are both of the form `{α} [Mul α] (a b : α)`, so the TODO is stale.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
maintainer-merge
label:t-algebra$ |
0/4 |
Mathlib/Algebra/Group/WithOne/Defs.lean |
1 |
3 |
['Multramate', 'github-actions', 'themathqueen'] |
themathqueen assignee:themathqueen |
1-29703 1 day ago |
46-13763 46 days ago |
46-13751 46 days |
| 42497 |
mathlib-splicebot author:mathlib-splicebot |
feat: add `contDiffWithinAt_clm_apply` |
All the necessary work as already contained in `contDiffOn_clm_apply`; it is useful to also have the point-wise version available. This will be used to prove a smoothness criterion of tensor fields on manifold.
From the path towards the smoothness of the Levi-Civita connection. |
t-analysis |
12/6 |
Mathlib/Analysis/Calculus/ContDiff/FiniteDimension.lean |
1 |
1 |
['github-actions'] |
nobody |
1-28439 1 day ago |
1-29060 1 day ago |
1-29048 1 day |
| 42496 |
mathlib-splicebot author:mathlib-splicebot |
chore(Geometry/Manifold/VectorBundle/Basic): consolidate open statements |
Extracted from #36036, as a by-product of work towards Riemannian geometry in mathlib. |
t-differential-geometry
easy
|
2/6 |
Mathlib/Geometry/Manifold/VectorBundle/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
1-28389 1 day ago |
1-29070 1 day ago |
1-29058 1 day |
| 42471 |
mo271 author:mo271 |
feat(RingTheory/LaurentSeries): add Leibniz rule |
This adds `hasseDeriv_mul` and `derivative_mul`.
Written with the help of Gemini
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
LLM-generated
|
101/0 |
Mathlib/RingTheory/LaurentSeries.lean |
1 |
8 |
['felixpernegger', 'github-actions', 'mathlib-bors', 'mo271', 'wwylele'] |
nobody |
1-27880 1 day ago |
2-40615 2 days ago |
2-40705 2 days |
| 40496 |
thefundamentaltheor3m author:thefundamentaltheor3m |
feat(LinearAlgebra/AffineSpace/Simplex): the surface of a simplex |
I wrote the definition myself, and got Claude to generate some of the boilerplate code (which I then reviewed and had it clean up).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
new-contributor
label:t-algebra$ |
97/5 |
Mathlib/LinearAlgebra/AffineSpace/Simplex/Basic.lean |
1 |
8 |
['github-actions', 'grunweg', 'mathlib-bors', 'mathlib-merge-conflicts', 'thefundamentaltheor3m', 'wwylele'] |
nobody |
1-26930 1 day ago |
1-28364 1 day ago |
14-57772 14 days |
| 41154 |
sgouezel author:sgouezel |
feat: the variation of a Stieltjes vector measure |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
maintainer-merge
|
330/5 |
Mathlib/MeasureTheory/VectorMeasure/BoundedVariation.lean,Mathlib/MeasureTheory/VectorMeasure/Variation/Basic.lean |
2 |
20 |
['EtienneC30', 'github-actions', 'mathlib-merge-conflicts', 'sgouezel'] |
EtienneC30 assignee:EtienneC30 |
1-24825 1 day ago |
2-32523 2 days ago |
37-14721 37 days |
| 42487 |
bocowgill author:bocowgill |
feat(Algebra/BigOperators/Group/Finset/Powerset): add nested powersetCard identities |
This PR adds product and sum identities for nested collections of fixed-cardinality subsets. For
`r ≤ k`, each `r`-element subset of a finite set `s` is contained in exactly
`Nat.choose (s.card - r) (k - r)`
of the `k`-element subsets of `s`. Thus, a sum over the `r`-element subsets of every `k`-element
subset reduces to this multiplicity, times a single sum over `s.powersetCard r`. The product version
is the analogous power identity.
The proof exchanges the order of the two big operators using `Finset.prod_comm'`. It then counts
each fiber with `Finset.card_filter_powersetCard_subset`. The additive identities are generated
with `to_additive`. The PR also provides the useful elementwise specialization `r = 1`.
**Motivation**: These results provide reusable weighted double-counting tools for finite
combinatorics. They are useful in arguments about uniform set systems, incidence relations, and
sums or products over fixed-cardinality subsets.
---
### LLM disclosure
For theorem planning and Lean implementation, I used OpenAI Codex substantially. I also used Codex to search Mathlib and open PRs for related results, suggest naming and documentation, iterate on the proofs, audit import dependencies, and validate the commits locally.
I personally reviewed the mathematical statements and Lean code line-by-line, including the naming and API choices. I also confirmed that I can explain each step of the proofs.
For the current revision, I ran a targeted build of `Mathlib.Algebra.BigOperators.Group.Finset.Powerset`, the style and environment linters, and `git diff --check`. I also inspected the generated additive declarations and axiom dependencies, and tested an alternative proof using explicit incidence finsets. The complete GitHub CI suite passes.
This is one of my earliest Mathlib contributions. I welcome corrections and suggestions, and I am prepared to revise the PR and learn from the review. |
t-algebra
new-contributor
LLM-generated
label:t-algebra$ |
50/0 |
Mathlib/Algebra/BigOperators/Group/Finset/Powerset.lean |
1 |
3 |
['bocowgill', 'github-actions'] |
nobody |
1-23375 1 day ago |
1-23375 1 day ago |
1-23363 1 day |
| 42480 |
SnirBroshi author:SnirBroshi |
feat(Order/SuccPred/Limit): generalize `IsSuccPrelimit.isLUB_Iio` from `LinearOrder` to `SemilatticeInf` |
Generalize `IsSucc[Pre]limit.isLUB_Iio` from `LinearOrder` to `SemilatticeInf`,
and `IsSuccLimit.sSup_Iio` from `ConditionallyCompleteLinearOrderBot` to `ConditionallyCompleteLattice`.
Also show `IsLUB (.Iio b) a → a ⩿ b`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
34/12 |
Mathlib/Order/Cover.lean,Mathlib/Order/SuccPred/CompleteLinearOrder.lean,Mathlib/Order/SuccPred/Limit.lean |
3 |
1 |
['github-actions'] |
nobody |
1-21784 1 day ago |
1-70287 1 day ago |
1-70989 1 day |
| 40775 |
felixpernegger author:felixpernegger |
feat(Data/Finset): `insert a (s.erase a) = insert a s` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
5/3 |
Mathlib/Data/Finset/Basic.lean,Mathlib/Data/Finset/Fold.lean,Mathlib/RingTheory/Lasker.lean |
3 |
5 |
['eric-wieser', 'felixpernegger', 'github-actions', 'themathqueen'] |
nobody |
1-21255 1 day ago |
1-24068 1 day ago |
50-2441 50 days |
| 42493 |
attilavjda author:attilavjda |
chore(GroupTheory/Complement): deduplicate IsComplement.card_mul |
IsComplement.card_mul restated IsComplement.card_mul_card. Keep the latter (conventional name, has to_additive), deprecate the former, rename IsComplement'.card_mul to match, update the call site.
Aristotle helped with finding the duplicates, generating and verifing the code, understanding the proofs, preparing the PR and reasoning.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
new-contributor
|
9/7 |
Mathlib/GroupTheory/Complement.lean |
1 |
2 |
['github-actions'] |
nobody |
1-21142 1 day ago |
1-32941 1 day ago |
1-32929 1 day |
| 42498 |
plp127 author:plp127 |
chore: make `norm_num` normalize negative rationals as `-a / b` |
Make `norm_num` normalize negative rationals as `-a / b` instead of `-(a / b)`. This is consistent with how `#eval` and `ring_nf` do them. See [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/normal.20form.20of.20a.20rational.20number/near/614821577).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta |
9/9 |
Mathlib/Analysis/SpecialFunctions/Pow/NNReal.lean,Mathlib/Analysis/SpecialFunctions/Pow/Real.lean,Mathlib/Data/NNRat/Floor.lean,Mathlib/Tactic/NormNum/IsSquare.lean,Mathlib/Tactic/NormNum/Result.lean |
5 |
1 |
['github-actions'] |
nobody |
1-19824 1 day ago |
1-22585 1 day ago |
1-24064 1 day |
| 42410 |
MrBrain295 author:MrBrain295 |
feat(Data/EReal): prove recENNReal_neg_coe_ennreal |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Replaces the `proof_wanted` with a proof and removes the extra import. Generated by @Aristotle-Harmonic and reviewed by myself.
[](https://gitpod.io/from-referrer/)
|
t-data
LLM-generated
new-contributor
|
10/4 |
Mathlib/Data/EReal/Operations.lean |
1 |
8 |
['MrBrain295', 'Whysoserioushah', 'github-actions'] |
nobody |
1-18900 1 day ago |
2-17462 2 days ago |
2-17531 2 days |
| 36605 |
martinwintermath author:martinwintermath |
feat(Geometry/Convex/Cone): Add lemmas about interaction of hull, span and negation |
Prove lemmas about the interaction of hull, span and negation.
Main additions:
* `PointedCone.toSubmodule` that produces a submodule with the same support given that `-C = C`. Also the corresponding `CanLift`
* `PointedCone.hull_neg_pair_eq_span_singleton` proving `hull R {-x, x} = R ∙ x` (simp lemma)
* `PointedCone.span_eq_hull_neg_sup_hull` proving `span R s = hull R (-s) ⊔ hull R s`
* `PointedCone.mem_span` proving `x ∈ span R C ↔ ∃ p, n ∈ C, x = p - n`
Considerations: there are several ways to express that a convex cone is a submodule:
* `-C = C`
* `-C ≤ C` or `C ≤ -C`
* `C = span R C`
* `C = C.lineal`
The consensus was that the the first option is the most direct way to express this property, which then allows to lift to a submodule.
Co-authored by: Olivia Röhrig, Kilian Rueß, Artie Khovanov
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37464
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry |
65/0 |
Mathlib/Geometry/Convex/Cone/Pointed.lean |
1 |
75 |
['YaelDillies', 'artie2000', 'github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
1-16602 1 day ago |
73-83877 73 days ago |
90-84471 90 days |
| 40683 |
dennj author:dennj |
feat(Analysis/Matrix): prove Hadamard's determinant inequality |
This PR adds Hadamard's maximal determinant inequality: a real matrix with entries bounded by `1` in absolute value has determinant at most the Hadamard bound.
This is the classical extremal theorem behind Hadamard matrices. The equality case is also proved, so `Matrix.IsHadamard` is characterized as exactly the matrices attaining the maximal determinant. This turns the existing Hadamard matrix API into the solution of its natural optimization problem, rather than only an algebraic definition.
The proof also adds a few small reusable pieces of API connecting matrix rows with Euclidean-space determinants, Gram-Schmidt equality cases, and row-orthogonality recognition of Hadamard matrices. |
t-analysis |
230/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/GramSchmidtOrtho.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/Matrix/HadamardInequality.lean,Mathlib/LinearAlgebra/Matrix/HadamardMatrix.lean |
5 |
14 |
['dennj', 'github-actions', 'j-loreaux', 'wwylele'] |
j-loreaux assignee:j-loreaux |
1-16528 1 day ago |
1-32113 1 day ago |
51-29382 51 days |
| 40579 |
jcreinhold author:jcreinhold |
feat(Algebra/Category/Ring): preserve limits to CommMonCat |
Adds the missing instance saying that forgetting a commutative ring to its multiplicative commutative monoid preserves limits. |
t-algebra
new-contributor
label:t-algebra$ |
7/0 |
Mathlib/Algebra/Category/Ring/Limits.lean |
1 |
8 |
['felixpernegger', 'github-actions', 'jcreinhold'] |
ocfnash assignee:ocfnash |
1-16304 1 day ago |
54-34786 54 days ago |
54-43248 54 days |
| 42470 |
yuanyi-350 author:yuanyi-350 |
chore(Topology/EMetricSpace/Basic): generalize compact separability to pseudometrizable spaces |
|
t-topology |
15/10 |
Mathlib/Topology/EMetricSpace/Basic.lean,Mathlib/Topology/Metrizable/Basic.lean |
2 |
2 |
['github-actions', 'plp127'] |
nobody |
1-12388 1 day ago |
1-16786 1 day ago |
2-47396 2 days |
| 40741 |
AntoineduFresne author:AntoineduFresne |
feat(order): dilworth's and mirsky's theorems for finite orders |
I add Dilworth's theorem and its order dual, Mirsky's theorem, for finite subsets of a partial order, together with the order-theoretic lemmas they rest on.
A prior external formalization by Vlad Tsyrklevich is linked from `1000.yaml`; this is an independent `Finset`-based development using Galvin's proof, and I agreed the `1000.yaml` update with him.
I split the min-max content, as for Hall's marriage theorem, into a weak-duality inequality and a strong-duality existence of a matching pair, so I never define an extremal quantity over families of sets (no `Finset.min'` / `Finset.max'`):
- `dilworth` / `mirsky` — an antichain and a chain cover (resp. a chain and an antichain cover) of equal size;
- `antichain_le_chain_cover` / `chain_le_antichain_cover` — the weak-duality inequalities, for an arbitrary relation;
- `dilworth_partition` / `mirsky_partition` — the same with a pairwise-disjoint partition.
For Dilworth I use Galvin's induction (gluing step `chainCover_glue`); I avoid the König /
bipartite-matching route since König isn't in Mathlib yet (at least last time I checked). I prove Mirsky directly (peeling off minimal elements) rather than via `OrderDual`, since the direct induction seems simpler to me and the two proofs already share their foundations (the closure lemmas and the injective weak dualities).
Internally I work with an injection `f : α → Finset α` on the antichain rather than with the
`Finset (Finset α)` cover directly, so distinctness of the chains comes from the antichain property instead of a separate bookkeeping.
## Questions I'd like input on
1. Explicit min-max? I give weak duality plus a matching pair, from which "largest antichain = smallest chain cover" follows; I do not state that equality as a single theorem (doing so would, I think, mean defining the extremal quantities I wanted to avoid). Would you also like an explicit min-max statement?
2. Two layers of weak duality. I expose it twice: an injective form (`IsAntichain.exists_injOn_mem_chains`, over an arbitrary relation and an arbitrary index type, no finiteness) and a `Finset` cardinality form (`antichain_le_chain_cover`), the latter a one-line specialization of the former. I'm not sure whether exposing both is right, or whether one of them should be canonical. And is there appetite to push the general core to an `ℕ∞` / infinite version, or is the finite form the right scope here?
3. `[DecidableEq α]` on the main theorems. It comes only from writing the cover as
`s = 𝒞.biUnion id` (`Finset.biUnion` needs it); a membership-form coverage condition such as `∀ x, x ∈ s ↔ ∃ C ∈ 𝒞, x ∈ C` would drop the assumption, though it seems to me a bit less readable. Which do you prefer? (I think the injective-form weak dualities assume neither order, finiteness, nor `DecidableEq`.)
4. Naming. I use `C` / `A` for a chain / antichain and `𝒞` / `𝒜` for a chain / antichain cover (for hopefully obvious reason). Happy to change these if you would prefer something else.
## Open questions
- File placement (`Mathlib/Order/Dilworth.lean`?), and whether the general lemmas (the antichain closures, the injective transversal and weak dualities) should live in existing files (`Mathlib/Order/Antichain.lean`, `Mathlib/Order/UpperLower/…`) rather than in a new file.
Zulip: https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Antoine.20du.20Fresne.20von.20Hohenesche/with/604112426
AI use: I worked out all proofs on paper first and most of the design structure of the file. I then used Claude Code (Claude Opus) to transcribe my paper proofs into Lean, weaken hypotheses, reduce redundancy, and fix comment typos. |
t-order
new-contributor
LLM-generated
|
610/3 |
Mathlib.lean,Mathlib/Order/Dilworth.lean,docs/1000.yaml |
3 |
18 |
['AntoineduFresne', 'SnirBroshi', 'github-actions', 'tdwag123'] |
nobody |
1-8905 1 day ago |
50-45852 50 days ago |
50-47002 50 days |
| 41347 |
mkaratarakis author:mkaratarakis |
feat(Tactic/Polynomial): poly_dvd_cert, certificate-based polynomial divisibility |
The `poly_dvd_cert` tactic: prove `p ∣ q` for `Polynomial K` polyrith-style - search the quotient uncertified in compiled `MetaM` (pseudo-division, so the certified identity is division-free), then verify with `ring` and cancel the leading-coefficient unit. Works over any field with concrete or symbolic coefficients, for monic divisors over any commutative ring, and for unit leading coefficients.
|
t-meta
LLM-generated
|
290/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/ComputablePolynomial/DvdCert.lean,MathlibTest/ComputablePolynomial/PolyDvdCert.lean |
4 |
5 |
['JovanGerb', 'github-actions', 'mkaratarakis'] |
kim-em assignee:kim-em |
0-85963 23 hours ago |
1-33116 1 day ago |
32-70383 32 days |
| 42499 |
attilavjda author:attilavjda |
doc(Data/ENat,ENNReal): fix swapped docstring on mul_iInf_of_ne |
Fixed left from right multiplication and "see-also" to point at mul_iInf
[Aristotle helped](https://github.com/attilavjda/formal-contributions/blob/main/mul_iInf_of_ne/PR3.lean) with finding the error, generating and verifying a solution by tests, and made a guide to the solution.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
5/5 |
Mathlib/Data/ENNReal/Inv.lean,Mathlib/Data/ENat/Lattice.lean |
2 |
3 |
['github-actions'] |
nobody |
0-85467 23 hours ago |
1-18628 1 day ago |
1-18616 1 day |
| 39875 |
mkaratarakis author:mkaratarakis |
refactor(NumberField/House): expose Siegel lemma infrastructure |
Expose Siegel's lemma infrastructure in `NumberField.House`: rename the private basis-matrix bound to `basisMatrixInvSupNorm`, make `house` reducible, and adjust `exists_ne_zero_int_vec_house_le`. This changes are required for #39874.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
|
58/48 |
Mathlib/NumberTheory/NumberField/House.lean |
1 |
5 |
['github-actions', 'mathlib-merge-conflicts', 'mkaratarakis', 'tb65536'] |
nobody |
0-84385 23 hours ago |
2-32396 2 days ago |
45-37180 45 days |
| 41889 |
Ljon4ik4 author:Ljon4ik4 |
chore: corrected namespace of ker_mapOfCompatibleSMul in the docstring of mapOfCompatibleSMul_surjective |
The Lemma `TensorProduct.mapOfCompatibleSMul_surjective` contained a wrong reference to `TensorProduct.AlgebraTensorModule.ker_mapOfCompatibleSMul` (it was missing the `AlgebraTensorModule`). That is corrected in this PR.
(Sorry if that is to minor for a PR !)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
2/2 |
Mathlib/LinearAlgebra/TensorProduct/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
0-84004 23 hours ago |
20-21864 20 days ago |
20-21852 20 days |
| 42505 |
attilavjda author:attilavjda |
chore(Algebra/Tropical/Basic): deduplicate five pairs of lemmas |
`On a LinearOrder`, `⊓`/`⊔` are `min`/`max`, so `trop_inf`, `untrop_sup`, `inf_eq_add`, and `trop_sup_def` are the same statements as `trop_min`, `untrop_max`, `min_eq_add`, and `trop_max_def`, respectively (three duplicated `simp` lemmas). Likewise, `injective_trop`/`injective_untrop` duplicate `trop_injective`/`untrop_injective`. The removed lemmas become deprecated aliases.
[I used Aristotle AI](https://github.com/attilavjda/formal-contributions/blob/main/tropical_dedup_lemmas/RequestProject/TropicalDedup.lean) it helped find the duplicates, and generated the solutions, verified the equivalences, and helped in understanding the proofs, and meaning of the refactor.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebra
label:t-algebra$ |
8/17 |
Mathlib/Algebra/Tropical/Basic.lean |
1 |
2 |
['github-actions'] |
nobody |
0-81097 22 hours ago |
0-86062 23 hours ago |
1-3522 1 day |
| 41610 |
SnirBroshi author:SnirBroshi |
chore(Logic/Relation): golf using `grind` |
Also tag `Relation.map_apply` with `grind =`.
---
- `comp_assoc`: 14ms to 23ms
- `IsTrans.map`: 10ms to 28ms
- `instIsPreorderOfIsTrans`: ? to 11ms
- `total_of_right_unique`: ? to 15ms
- `isTrans_join`: 10ms to 100ms
- `Quot.eqvGen_sound`: ? to ?
- `Equivalence.eqvGen_iff`: ? to 14ms
(the question marks mean that `trace.profiler` doesn't output anything, maybe they're below 1ms?)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
17/45 |
Mathlib/Combinatorics/SimpleGraph/Subgraph.lean,Mathlib/Logic/Relation.lean |
2 |
11 |
['SnirBroshi', 'b-mehta', 'chenson2018', 'github-actions', 'grunweg', 'leanprover-radar', 'themathqueen'] |
nobody |
0-77515 21 hours ago |
20-70494 20 days ago |
21-7488 21 days |
| 35735 |
mkaratarakis author:mkaratarakis |
feat(NumberTheory): analytical properties and lower bounds for Gelfond-Schneider auxiliary function |
This PR is the third component in the formalization of the Gelfond-Schneider Theorem (Hilbert's Seventh Problem). It connects the algebraically constructed auxiliary function `R(x)` to its analytical properties, establishing the exact order of vanishing and the fundamental lower bound on the norm of its non-zero derivative evaluation.
Following the argument in Loo-Keng Hua's *Introduction to Number Theory* (Chapter 17.9, equations (4) and (5)), we define the minimal non-vanishing derivative order $r$ and scale the evaluation to an algebraic integer to compute its norm.
1. (`iteratedkDeriv_R_eq_zero` & `order_geq_n`): We verify that the coefficient vector $\eta$ (chosen via Siegel's lemma in the previous PR) forces the first $n$ derivatives of the auxiliary function $R(x)$ to vanish at the points $x \in \{1, 2, \dots, m\}$. Consequently, the analytical order of $R(x)$ at these points is at least $n$.
2. We extract $r$, the exact minimal order of vanishing of $R(x)$ among all points $1 \le l \le m$, and prove that $n \le r$.
3. We define the non-zero algebraic number $\rho = (\log \alpha)^{-r} R^{(r)}(l_0)$.
4. We prove the crucial textbook step that scaling $\rho$ by $c_1^{r+2mq}$ (formalized here as `cρ`) results in an algebraic integer in $\mathcal{O}_K$.
5. Because $c_1^{r+2mq} \rho$ is a non-zero algebraic integer, the absolute value of its norm is at least $1$. We use this to formally prove the strict lower bound on the absolute norm of the unscaled $\rho$: $|N(\rho)| > c_1^{-h(r+2mq)} > c_5^{-r}$.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #35734 [optional extra text]
[](https://gitpod.io/from-referrer/)
|
t-number-theory
new-contributor
|
1105/48 |
Mathlib.lean,Mathlib/NumberTheory/NumberField/House.lean,Mathlib/NumberTheory/Transcendental/GelfondSchneider/MainAlg.lean,Mathlib/NumberTheory/Transcendental/GelfondSchneider/MainOrder.lean,Mathlib/RingTheory/Algebraic/NatDenominator.lean |
5 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
0-76503 21 hours ago |
0-76503 21 hours ago |
0-76970 21 hours |
| 42503 |
plp127 author:plp127 |
chore: generalize theorems `Finset.Ici_top` and `Finset.Iic_bot` |
Generalize the theorems `Finset.Ici_top` and `Finset.Iic_bot` from `LocallyFiniteOrder` to `LocallyFiniteOrderTop` and `LocallyFiniteOrderBot`, respectively. Also generalize the instance of `Unique (Finset.Iic ⊥)` from `LocallyFiniteOrder` to `LocallyFiniteOrderBot`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
10/10 |
Mathlib/Order/Interval/Finset/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
0-76390 21 hours ago |
1-7650 1 day ago |
1-7638 1 day |
| 41902 |
Ljon4ik4 author:Ljon4ik4 |
feat: sum of derivations lemmas |
This PR adds Lemmas showing that derivations are well-behaved with sums.
In order to prove one of them an additive map version of `coe : Derivation R A M → A →ₗ[R] M` is also added.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
17/0 |
Mathlib/RingTheory/Derivation/Basic.lean |
1 |
8 |
['Ljon4ik4', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
0-76367 21 hours ago |
20-1994 20 days ago |
20-1988 20 days |
| 42357 |
SynBurz author:SynBurz |
feat: the Krull dimension of the product of finitely many rings is equal to the maximum of Krull dimensions of the factors |
Add `ringKrullDim_pi_eq_iSup_ringKrullDim`. Also add useful defs: `LTSeries.sigmaEquiv`, `PrimeSpectrum.sigmaToPiOrderIso`, and lemmas `PrimeSpectrum.sigmaToPiOrderIso_apply`, Pi.not_comap_evalRingHom_le_comap_of_neq`, `LTSeries.sigma_fst_eq_fst`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
93/0 |
Mathlib/Order/RelSeries.lean,Mathlib/RingTheory/Ideal/Maps.lean,Mathlib/RingTheory/Spectrum/Prime/Topology.lean |
3 |
5 |
['SynBurz', 'github-actions', 'wwylele'] |
nobody |
0-76157 21 hours ago |
5-66789 5 days ago |
5-67180 5 days |
| 42504 |
yuanyi-350 author:yuanyi-350 |
feat(Analysis/Calculus): add Euler's theorem for homogeneous functions |
Add a local, vector-valued version of [Euler's homogeneous function theorem](https://en.wikipedia.org/wiki/Homogeneous_function#Euler's_theorem).
Assume `f (t • x) = w t • f x` for `t` near `1`. If `f` has Fréchet derivative `f'` at `x` and `w` has derivative `w'` at `1`, conclude `f' x = w' • f x`. This formulation works over an arbitrary nontrivially normed field and for functions between normed spaces.
Also provide a corollary under the global homogeneity condition `∀ t y, f (t • y) = w t • f y`, and register both declarations in `docs/1000.yaml`. |
t-analysis |
28/0 |
Mathlib/Analysis/Calculus/LineDeriv/Basic.lean,docs/1000.yaml |
2 |
1 |
['github-actions'] |
nobody |
0-74172 20 hours ago |
1-6914 1 day ago |
1-6902 1 day |
| 39843 |
wwylele author:wwylele |
feat(Analysis/Meromorphic): a non-zero meromorphic function has multiplicative inverse |
This is the core lemma to say that the equivalent classes of meromorphic functions have will-defined inverse
AI usage disclosure: Aristotle was used to draft the initial proof, and it was manually restructured.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39904
[](https://gitpod.io/from-referrer/)
|
t-analysis |
28/0 |
Mathlib/Analysis/Meromorphic/Order.lean |
1 |
5 |
['CoolRmal', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'wwylele'] |
ADedecker assignee:ADedecker |
0-72839 20 hours ago |
0-73690 20 hours ago |
32-14404 32 days |
| 42375 |
TJHeeringa author:TJHeeringa |
feat(Analysis/Normed): add `LinearMap.extendOfIsometry` |
Adds `LinearMap.extendOfIsometry`, the extention of a linear map `f : E →ₛₗ[𝕜] F` between normed spaces to a linear isometry `Eₗ →ₗᵢ[𝕜] Fₗ` between Banach spaces with a dense map `e₁ : E →ₗ[𝕜] Eₗ`, a linear map `e₂ : F →ₗ[𝕜] Fₗ` and the corresponding norm estimate.
---
`LinearEquiv` and `ContinuousLinearMap` have this extension, but a corresponding one for `LinearIsometry` does not exist.
I called this `extendOfIsometry` because `LinearIsometry.extend` map already [exists](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Analysis/InnerProductSpace/PiL2.html#LinearIsometry.extend) and `LinearEquiv` has a similar map. That map is the special case of `LinearIsometry.extendOfIsometry` when the input space is a submodule of a finite dimensional inner product space. A case could be made for calling `LinearIsometry.extendOfIsometry` `LinearIsometry.extend` and renaming the existing `LinearIsometry.extendOfIsometry` to `LinearIsometry.extendOfFin`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
maintainer-merge
|
42/5 |
Mathlib/Analysis/Normed/Operator/Extend.lean |
1 |
28 |
['TJHeeringa', 'github-actions', 'mcdoll', 'wwylele'] |
mcdoll assignee:mcdoll |
0-72355 20 hours ago |
1-44458 1 day ago |
3-62699 3 days |
| 38055 |
felixpernegger author:felixpernegger |
feat(Topology/EMetricSpace): add r-variation |
Redoing #37007 (I had accidently deleted my fork which nuked the PR).
See https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/p-variation for discussion.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
t-analysis
|
395/0 |
Mathlib.lean,Mathlib/Topology/EMetricSpace/RVariation.lean |
2 |
22 |
['felixpernegger', 'github-actions', 'luigi-massacci', 'luigimassacci-ax', 'mathlib-merge-conflicts'] |
ADedecker assignee:ADedecker |
0-67876 18 hours ago |
2-29437 2 days ago |
107-22667 107 days |
| 39709 |
justus-springer author:justus-springer |
feat(RingTheory/): `MvPolynomial` is standard smooth |
Add the trivial submersive presentation for `MvPolynomial` and show that `MvPolynomial` is standard smooth over its base ring. This will be used to show that affine space is smooth in #39710.
- [x] depends on: #39708
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
47/0 |
Mathlib/RingTheory/Extension/Presentation/Basic.lean,Mathlib/RingTheory/Extension/Presentation/Submersive.lean,Mathlib/RingTheory/Smooth/StandardSmooth.lean |
3 |
4 |
['faenuccio', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
alreadydone assignee:alreadydone |
0-67874 18 hours ago |
48-12510 48 days ago |
73-4953 73 days |
| 39870 |
YaelDillies author:YaelDillies |
feat(Data): interleaving lists |
Define interleaving of lists as a relation.
This will be used to define interleaving polynomials, which in turn are a central concept in the line of work that earned June Huh his 2022 Fields medal.
From RealRooted
---
Interleaving of lists as an operation was merged in https://github.com/leanprover-community/batteries/pull/1853.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
137/0 |
Mathlib.lean,Mathlib/Data/List/Interleave.lean |
2 |
21 |
['YaelDillies', 'chenson2018', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'ocfnash'] |
TwoFX assignee:TwoFX |
0-67874 18 hours ago |
35-16755 35 days ago |
72-71700 72 days |
| 41736 |
pechersky author:pechersky |
feat: generalize SMul instances from DistribMulAction to DistribSMul |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
Affected types:
- `M →SL[σ₁₂] M₂` (semilinear maps)
- `ContinuousMultilinearMap 𝕜 E G`
- `FreeLieAlgebra R X`
- `𝓓^{n}_{K}(E, F)` (compactly supported smooth functions)
- `𝓓^{n}(Ω, F)` (test functions)
---
Discovered while working on #40785.
Used GPT 5.6 Terra to classify hunks from the originating PR and do the cherry-pick operations. |
t-analysis |
72/15 |
Mathlib/Algebra/Lie/Free.lean,Mathlib/Analysis/Distribution/ContDiffMapSupportedIn.lean,Mathlib/Analysis/Distribution/TestFunction.lean,Mathlib/Analysis/Normed/Module/Multilinear/Basic.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
5 |
1 |
['github-actions'] |
j-loreaux assignee:j-loreaux |
0-67873 18 hours ago |
24-17606 24 days ago |
24-17594 24 days |
| 42306 |
b-mehta author:b-mehta |
feat(NumberTheory/Padics): add Rat.padicValuation_natCast |
A prereq for #42304.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
easy
t-number-theory
|
6/2 |
Mathlib/NumberTheory/Padics/PadicNumbers.lean |
1 |
1 |
['github-actions'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
0-67872 18 hours ago |
7-20674 7 days ago |
7-20754 7 days |
| 42326 |
AlyciaBHZ author:AlyciaBHZ |
feat(NumberTheory/Wilson): explicit square root of -1 modulo a prime |
Adds an explicit square root of `-1` in `ZMod p`, together with the half-factorial pairing identity it rests on.
- `ZMod.factorial_eq_neg_one_pow_mul_half_factorial_sq`: for odd `p`, `(p - 1)! = (-1)^m * (m !)^2` in `ZMod p` with `m = (p - 1) / 2`. Only needs `Odd p`, not primality.
- `ZMod.half_factorial_sq_eq_neg_one`: for prime `p` with `p % 4 ≠ 3`, `((p - 1) / 2)!` is a square root of `-1`.
### Why
Mathlib has `exists_sq_eq_neg_one_iff` for existence and `mod_four_ne_three_of_sq_eq_neg_one` for the converse, but nothing takes you from the congruence condition to a specific root. I checked all seventeen uses of `IsSquare (-1 : ZMod _)` currently in Mathlib and none of them exhibits a witness.
A live case: `SumOfTwoSquares/Wilson.lean` in `seewoo5/DifferentProofs` states the pairing identity verbatim in a docstring, though only for `p ≡ 1 mod 4` and assuming primality. I have no consumer for it myself — I hit the gap formalizing something adjacent and it seemed worth contributing rather than keeping local.
The pairing identity is worth having on its own: it is the core step of the standard Wilson argument and holds for any odd `p`, so it is not really about primes.
### AI disclosure
The Lean proofs were drafted with an OpenAI Codex agent orchestrated by Claude Code, and I reviewed the result. I re-ran the duplicate search against current master, CSLib, Batteries, Lean core and by type on Loogle, and ran `lake build` / `runLinter` / `lint-style` by hand.
|
t-number-theory
new-contributor
LLM-generated
|
42/1 |
Mathlib/NumberTheory/Wilson.lean |
1 |
12 |
['AlyciaBHZ', 'bocowgill', 'github-actions', 'wwylele'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
0-67870 18 hours ago |
6-27335 6 days ago |
6-27323 6 days |
| 42383 |
matt-w-horn author:matt-w-horn |
doc(Probability/Distributions): fix the mass in the Geometric docstring |
The module docstring gives the mass at `{n}` as `(1 - p) ^ n * n`. It's `(1 - p) ^ n * p`, per `geometricMeasure_singleton`.
Same file: "experience" for "experiment", a bullet siting the measure on "a semiring `R`" when it's on `ℕ`, and "positivty".
Claude Fable spotted these; I made the edits.
Assisted-by: Claude Fable 5 |
t-measure-probability
new-contributor
LLM-generated
easy
|
4/4 |
Mathlib/Probability/Distributions/Geometric.lean |
1 |
4 |
['github-actions', 'matt-w-horn'] |
EtienneC30 assignee:EtienneC30 |
0-67869 18 hours ago |
4-66279 4 days ago |
4-66267 4 days |
| 41818 |
Vierkantor author:Vierkantor |
feat(Tactic/Linter): add linter for missing `@[tactic_alt]` tags |
This PR adds a `tacticAlt` linter that complains when there are two tactics with the same user-facing name (usually: the first token in their syntax) but they aren't marked as `@[tactic_alt]` to each other. Those situations lead to duplicate entries in doc-gen's tactic overview page.
You can see example output in the tests file, or in the [build log](https://github.com/leanprover-community/mathlib4/actions/runs/29502419244/job/87654684693).
The current simple implementation has one limitation: if multiple duplicates are all being linted at once, each of them gets a linter warning. I think this is okay, but we could be a bit stricter and only produce the warning on the tactic that comes later in the environment.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
maintainer-merge
|
75/0 |
Mathlib/Tactic/ApplyAt.lean,Mathlib/Tactic/ClearExcept.lean,Mathlib/Tactic/Linter/TacticDocumentation.lean,MathlibTest/Linter/TacticDoc.lean |
4 |
6 |
['JovanGerb', 'adomani', 'github-actions', 'leanprover-radar'] |
nobody |
0-66975 18 hours ago |
22-7476 22 days ago |
22-7476 22 days |
| 41517 |
sadasant author:sadasant |
feat(MeasureTheory): define Hellinger affinity |
Define the Hellinger affinity (Bhattacharyya coefficient) of two measures as an `ENNReal`-valued lintegral against the canonical dominating measure `μ + ν`, making the definition total with no absolute-continuity or integrability side conditions. Provide symmetry, invariance under the choice of sigma-finite dominating measure, the self-affinity of a probability measure, the `rnDeriv` and `withDensity` computation rules, the bound `≤ 1` for probability measures (via Hölder with `p = q = 2`), and the characterization that the affinity vanishes iff the measures are mutually singular. Groundwork for a formalization of Kakutani's dichotomy (1948) for infinite products of probability measures.
---
**Design notes.**
On the value type ("why not `ℝ` / `ℝ≥0` / `EReal`"): the `ℝ≥0∞`-valued lintegral against `μ + ν` makes the affinity total, which is what makes the singular direction of Kakutani's dichotomy (planned follow-up PRs) case-split-free — `hellingerAffinity_eq_zero_iff` already characterizes mutual singularity with no absolute-continuity hypothesis. `InformationTheory.klDiv` sets the precedent of an `ℝ≥0∞`-valued, standalone divergence-like quantity. The invariance lemma `hellingerAffinity_eq_lintegral_rnDeriv_mul_rnDeriv` recovers the textbook `∫ √(dμ/dρ · dν/dρ) dρ` for any σ-finite dominating `ρ`.
**Relation to f-divergences** (CC @RemyDegenne for coordination with the planned `fDiv` upstreaming from TestingLowerBounds): the affinity is the f-integral at `f = √·`, equivalently `1 −` the Hellinger-½ divergence, with `H²(μ,ν)/2 = 1 − affinity`. Rather than block on an unlanded framework, this PR keeps the affinity standalone (the `klDiv` pattern); when `fDiv` lands, a single bridging lemma of the shape `fDiv hellingerFun μ ν = 1 - hellingerAffinity μ ν` reconciles them, and I am happy to contribute it. Also happy to move the file to `Mathlib/InformationTheory/` if reviewers prefer that home over `Mathlib/MeasureTheory/Measure/`.
**Roadmap.** This is PR 1 of a planned sequence building toward Kakutani's dichotomy for `Measure.infinitePi` over an arbitrary index type (stronger than the textbook countable statement): the `lintegral` product Fubini and `Measure.pi_withDensity`, the infinite-product/summability bridges, then the singular and absolutely-continuous directions and the packaged dichotomy. Natural follow-up API for this file, available on request: `hellingerAffinity_pos_iff`, monotonicity in each argument, and the relation to the squared Hellinger distance once a distance exists.
**Attribution and AI disclosure.** This material was developed in the public [riemann-venue](https://github.com/idolum-ai/riemann-venue) repository by Daniel Rodriguez in collaboration with Claude Fable 5 (Anthropic), as part of a machine-checked formalization of Kakutani's dichotomy (1948) for infinite products of probability measures. The definitions, proofs, and the drafting of this description were done with Claude Fable 5 via Claude Code, working from a design and statement plan reviewed by the human author; all proofs are checked by Lean (`#print axioms` on the main results reports only `propext`, `Classical.choice`, `Quot.sound`), and the human author reviewed the final form, takes responsibility for it, and will answer all review comments personally. I am applying the `LLM-generated` label per the contribution guidelines. |
t-measure-probability
LLM-generated
new-contributor
|
214/0 |
Mathlib.lean,Mathlib/MeasureTheory/Measure/Hellinger.lean |
2 |
4 |
['github-actions', 'sadasant'] |
nobody |
0-66974 18 hours ago |
29-77316 29 days ago |
29-77304 29 days |
| 31092 |
FlAmmmmING author:FlAmmmmING |
feat(Algebra/Group/ForwardDiff.lean): Add theorem `sum_shift_eq_fwdDiff_iter`. |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
17/1 |
Mathlib/Algebra/Group/ForwardDiff.lean |
1 |
24 |
['BeibeiX0', 'FlAmmmmING', 'Ruben-VandeVelde', 'dagurtomas', 'github-actions', 'jcommelin', 'mathlib-bors', 'mathlib4-merge-conflict-bot'] |
nobody |
0-66973 18 hours ago |
44-52460 44 days ago |
98-74503 98 days |
| 37934 |
Thmoas-Guan author:Thmoas-Guan |
feat(FieldTheory): definition of transcendental separable field extension |
In this PR, we introduce the concept of separably generated field extension and transcendental separable field extension.
Further properties will be in #37838
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
102/0 |
Mathlib.lean,Mathlib/FieldTheory/TranscendentalSeparable.lean |
2 |
14 |
['Thmoas-Guan', 'github-actions', 'robin-carlier'] |
nobody |
0-66972 18 hours ago |
89-17990 89 days ago |
97-36155 97 days |
| 38324 |
BryceT233 author:BryceT233 |
chore(RingTheory/AdicCompletion): make `AdicCompletion.map` linear on linear maps |
This PR upgrades `AdicCompletion.map` to be an R-linear map on the space of linear maps `M →ₗ[R] N`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
38/12 |
Mathlib/RingTheory/AdicCompletion/Basic.lean,Mathlib/RingTheory/AdicCompletion/Functoriality.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
0-66972 18 hours ago |
105-69355 105 days ago |
108-52049 108 days |
| 41960 |
qawbecrdtey author:qawbecrdtey |
chore(Topology/Order): cleanup imports |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Cleaned imports of `Mathlib.Topology.Order`.
+ Two exceptional files in `Mathlib.Order`.
[](https://gitpod.io/from-referrer/)
|
t-topology |
4/20 |
Mathlib/Order/Filter/AtTopBot/Archimedean.lean,Mathlib/Order/Filter/Cofinite.lean,Mathlib/Topology/Order/Basic.lean,Mathlib/Topology/Order/Bornology.lean,Mathlib/Topology/Order/Compact.lean,Mathlib/Topology/Order/Completion.lean,Mathlib/Topology/Order/HullKernel.lean,Mathlib/Topology/Order/IntermediateValue.lean,Mathlib/Topology/Order/IsLUB.lean,Mathlib/Topology/Order/Lattice.lean,Mathlib/Topology/Order/LawsonTopology.lean,Mathlib/Topology/Order/LeftRightLim.lean,Mathlib/Topology/Order/LiminfLimsup.lean,Mathlib/Topology/Order/LowerUpperTopology.lean,Mathlib/Topology/Order/MonotoneContinuity.lean,Mathlib/Topology/Order/PartialSups.lean,Mathlib/Topology/Order/Priestley.lean,Mathlib/Topology/Order/Rolle.lean,Mathlib/Topology/Order/WithTop.lean |
19 |
4 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'qawbecrdtey'] |
nobody |
0-66613 18 hours ago |
18-11141 18 days ago |
18-11149 18 days |
| 42198 |
lakesare author:lakesare |
feat(Topology/Instances/AddCircle/Defs): add equivAddCircle_eq, continuous_equivAddCircle |
From the Carleson project.
-------
**Upstreaming from Carleson: [/Carleson/ToMathlib/Topology/Instances/AddCircle/Defs.lean](https://github.com/fpvandoorn/carleson/blob/0072b6e47ec58ac13be0a9f3b7c17e9f3bb1be2e/Carleson/ToMathlib/Topology/Instances/AddCircle/Defs.lean)**
### Changes from carleson
- **theorem equivAddCircle_eq**
- refactored, generalized
- **theorem continuous_equivAddCircle**
- refactored, generalized
- `@[continuity]`, `@[fun_prop]` added
### Signatures
```lean
-- CARLESON
AddCircle.continuous_equivAddCircle.{u_3} {𝕜 : Type u_3} [Field 𝕜] {p q : 𝕜} [LinearOrder 𝕜] [IsStrictOrderedRing 𝕜]
[TopologicalSpace 𝕜] [OrderTopology 𝕜] [hp : Fact (0 < p)] [hq : Fact (0 < q)] :
Continuous ⇑(equivAddCircle p q (LT.lt.ne' Fact.out) (LT.lt.ne' Fact.out))
-- MATHLIB
AddCircle.continuous_equivAddCircle.{u_1} {𝕜 : Type u_1} [Field 𝕜] (p q : 𝕜) [LinearOrder 𝕜] [IsStrictOrderedRing 𝕜]
[TopologicalSpace 𝕜] [OrderTopology 𝕜] (hp : p ≠ 0) (hq : q ≠ 0) : Continuous ⇑(equivAddCircle p q hp hq)
```
```lean
-- CARLESON
AddCircle.equivAddCircle_eq.{u_3} {𝕜 : Type u_3} [Field 𝕜] {p q : 𝕜} [LinearOrder 𝕜] [IsStrictOrderedRing 𝕜]
[Archimedean 𝕜] [hp : Fact (0 < p)] [hq : Fact (0 < q)] :
⇑(equivAddCircle p q (LT.lt.ne' Fact.out) (LT.lt.ne' Fact.out)) = fun x ↦ ↑(↑((equivIco p 0) x) * (p⁻¹ * q))
-- MATHLIB
AddCircle.equivAddCircle_eq.{u_1} {𝕜 : Type u_1} [Field 𝕜] (p q : 𝕜) [LinearOrder 𝕜] [IsOrderedAddMonoid 𝕜]
[Archimedean 𝕜] [hp : Fact (0 < p)] (hq : q ≠ 0) :
⇑(equivAddCircle p q (LT.lt.ne' Fact.out) hq) = fun x ↦ ↑(↑((equivIco p 0) x) * (p⁻¹ * q))
``` |
t-topology
carleson
|
13/0 |
Mathlib/Topology/Instances/AddCircle/Defs.lean |
1 |
18 |
['felixpernegger', 'github-actions', 'grunweg', 'lakesare'] |
nobody |
0-60750 16 hours ago |
0-62030 17 hours ago |
2-36500 2 days |
| 42075 |
Parcly-Taxel author:Parcly-Taxel |
chore: delete deprecated declarations/modules from January 2026 |
`Mathlib.Util.MemoFix` is directly removed since all deprecations in it are more than 6 months old. |
tech debt
file-removed
maintainer-merge
|
1/2758 |
Mathlib.lean,Mathlib/Algebra/Algebra/Basic.lean,Mathlib/Algebra/Algebra/Epi.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/Category/ModuleCat/Semi.lean,Mathlib/Algebra/Category/Ring/Epi.lean,Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Int/Defs.lean,Mathlib/Algebra/GroupWithZero/Action/Defs.lean,Mathlib/Algebra/GroupWithZero/Basic.lean,Mathlib/Algebra/GroupWithZero/Defs.lean,Mathlib/Algebra/GroupWithZero/Int.lean,Mathlib/Algebra/GroupWithZero/NonZeroDivisors.lean,Mathlib/Algebra/GroupWithZero/Regular.lean,Mathlib/Algebra/ModEq.lean,Mathlib/Algebra/Module/Hom.lean,Mathlib/Algebra/Module/LinearMap/End.lean,Mathlib/Algebra/NoZeroSMulDivisors/Prod.lean,Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Algebra/Polynomial/Degree/Definitions.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Algebra/Ring/Regular.lean,Mathlib/AlgebraicGeometry/Artinian.lean,Mathlib/AlgebraicGeometry/Cover/MorphismProperty.lean,Mathlib/AlgebraicGeometry/Morphisms/ClosedImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/FinitePresentation.lean,Mathlib/AlgebraicGeometry/Morphisms/FiniteType.lean,Mathlib/AlgebraicGeometry/Morphisms/Flat.lean,Mathlib/AlgebraicGeometry/Morphisms/FormallyUnramified.lean,Mathlib/AlgebraicGeometry/Morphisms/OpenImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Preimmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Separated.lean,Mathlib/AlgebraicGeometry/Morphisms/SurjectiveOnStalks.lean,Mathlib/AlgebraicGeometry/Morphisms/UniversallyClosed.lean,Mathlib/AlgebraicGeometry/Morphisms/UniversallyOpen.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/SimplyConnected.lean,Mathlib/AlgebraicTopology/ModelCategory/CofibrantObjectHomotopy.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Asymptotics/AsymptoticEquivalent.lean,Mathlib/Analysis/Calculus/Deriv/Mul.lean,Mathlib/Analysis/Calculus/FDeriv/Add.lean,Mathlib/Analysis/Calculus/Implicit.lean,Mathlib/Analysis/Calculus/ImplicitContDiff.lean,Mathlib/Analysis/Calculus/TangentCone/Basic.lean,Mathlib/Analysis/Complex/IntegerCompl.lean,Mathlib/Analysis/Complex/Schwarz.lean,Mathlib/Analysis/Complex/TaylorSeries.lean,Mathlib/Analysis/Complex/UnitDisc/Basic.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Basic.lean,Mathlib/Analysis/Convex/Body.lean,Mathlib/Analysis/Distribution/FourierSchwartz.lean,Mathlib/Analysis/Distribution/SchwartzSpace.lean,Mathlib/Analysis/Distribution/SchwartzSpace/Fourier.lean,Mathlib/Analysis/Distribution/TemperedDistribution.lean,Mathlib/Analysis/Fourier/Notation.lean,Mathlib/Analysis/InnerProductSpace/Orthogonal.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/LocallyConvex/Barrelled.lean,Mathlib/Analysis/Matrix/Spectrum.lean,Mathlib/Analysis/Normed/Group/Basic.lean,Mathlib/Analysis/Normed/Group/Pointwise.lean,Mathlib/Analysis/Normed/Module/Ball/Pointwise.lean,Mathlib/Analysis/Normed/Order/Basic.lean,Mathlib/Analysis/Normed/Unbundled/SeminormFromConst.lean,Mathlib/Analysis/Polynomial/MahlerMeasure.lean,Mathlib/Analysis/Real/Hyperreal.lean,Mathlib/Analysis/SpecialFunctions/Complex/Log.lean,Mathlib/Analysis/SpecialFunctions/NonIntegrable.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Cotangent.lean,Mathlib/CategoryTheory/Adjunction/Opposites.lean,Mathlib/CategoryTheory/Category/Grpd.lean,Mathlib/CategoryTheory/Limits/Shapes/Products.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/CommSq.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/Equifibered.lean,Mathlib/CategoryTheory/MorphismProperty/Basic.lean,Mathlib/CategoryTheory/Sites/IsSheafFor.lean,Mathlib/CategoryTheory/Triangulated/TStructure/Basic.lean,Mathlib/Combinatorics/SimpleGraph/AdjMatrix.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/Vertex.lean,Mathlib/Combinatorics/SimpleGraph/VertexCover.lean,Mathlib/Computability/Primrec.lean,Mathlib/Computability/Primrec/Basic.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Data/Fintype/Prod.lean,Mathlib/Data/Int/ModEq.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Flatten.lean,Mathlib/Data/List/GetD.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Option/Defs.lean,Mathlib/Data/Set/Card.lean,Mathlib/Data/SetLike/Basic.lean,Mathlib/Data/Tree/RBMap.lean,Mathlib/FieldTheory/Isaacs.lean,Mathlib/Geometry/Manifold/PartitionOfUnity.lean,Mathlib/Geometry/Manifold/Riemannian/Basic.lean,Mathlib/Lean/Expr.lean,Mathlib/Lean/Expr/ReplaceRec.lean,Mathlib/LinearAlgebra/AffineSpace/AffineSubspace/Basic.lean |
184 |
5 |
['Parcly-Taxel', 'github-actions', 'grunweg', 'joneugster', 'mathlib-merge-conflicts'] |
joneugster assignee:joneugster |
0-56124 15 hours ago |
0-59736 16 hours ago |
13-11843 13 days |
| 42343 |
brianrabern author:brianrabern |
feat(Combinatorics/SimpleGraph): extend a coloring to one more vertex |
Add `Colorable.of_induce_compl_singleton`: if deleting a vertex `v` leaves an `n`-colourable graph and `deg(v) < n`, then `G` itself is `n`-colourable.
This is a local colouring-extension / induction step (colour `G - v`, then assign `v` a free colour). It is useful for inductive arguments such as Brooks' theorem. The global greedy bound `χ ≤ Δ + 1` is developed separately in #38357.
AI assistance: LLM was used to smooth it out and put things in the expected style
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
t-combinatorics
new-contributor
LLM-generated
|
35/0 |
Mathlib/Combinatorics/SimpleGraph/Coloring/Vertex.lean |
1 |
11 |
['Parcly-Taxel', 'SnirBroshi', 'bocowgill', 'brianrabern', 'github-actions'] |
nobody |
0-51737 14 hours ago |
3-14036 3 days ago |
5-55544 5 days |
| 42434 |
kebekus author:kebekus |
chore: rename files |
Rename files in `Mathlib/Analysis/SpecialFunctions/Integrability` and `Mathlib/Analysis/SpecialFunctions/Integrals` to better reflect their contents, and update docstrings. The current file names are somewhat unsystematic, very specialized, and will be seen as misleading once more material is added.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
file-removed
t-analysis
|
116/62 |
Mathlib.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/Complex/ValueDistribution/Proximity/Basic.lean,Mathlib/Analysis/Complex/ValueDistribution/Proximity/IntegralPresentation.lean,Mathlib/Analysis/Polynomial/MahlerMeasure.lean,Mathlib/Analysis/SpecialFunctions/Integrability/Log.lean,Mathlib/Analysis/SpecialFunctions/Integrability/PosLog.lean,Mathlib/Analysis/SpecialFunctions/Integrals/Log.lean,Mathlib/Analysis/SpecialFunctions/Integrals/PosLog.lean |
9 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
0-51268 14 hours ago |
0-51808 14 hours ago |
2-75315 2 days |
| 40578 |
CoolRmal author:CoolRmal |
feat(Topology/Order): convergence of suprema and infima |
The main lemma proved in this PR is that for every function `a : ι → α`, `Tendsto (fun F : Finset ι => F.inf a) atTop (𝓝 (⨅ i, a i))`, where `α` is a complete lattice and a SupConvergenceClass. The corresponding versions for `ciSup`, `iInf`, `ciInf` are also proved. We also prove `ciSup_eq_ciSup_finset`, which is the analogue of [iSup_eq_iSup_finset](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/CompleteLattice/Finset.html#iSup_eq_iSup_finset)
Created with the help of codex.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
--> |
t-topology
maintainer-merge
|
67/0 |
Mathlib/Data/Finset/Lattice/Fold.lean,Mathlib/Order/ConditionallyCompleteLattice/Finset.lean,Mathlib/Topology/Order/MonotoneConvergence.lean |
3 |
13 |
['CoolRmal', 'github-actions', 'mathlib-merge-conflicts', 'scholzhannah'] |
scholzhannah assignee:scholzhannah |
0-49658 13 hours ago |
3-6825 3 days ago |
15-63461 15 days |
| 40983 |
khwilson author:khwilson |
feat: lemmas to support F-space open mapping theorem |
In order to generalize the Banach open mapping theorem to a generic F-space, we need several leamms about balanced and absorbent sets in more arbitrary spaces. In particular, we need some key lemmas such as:
- A closed absorbent set in a Baire space with countably generated cobounded filter has nonempty interior
- A topological vector space has a basis of neighborhoods about 0 consisting of balanced sets
AI Disclosure: Generated by Claude Code with specific prompts from me and edits by me.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
LLM-generated
|
118/11 |
Mathlib.lean,Mathlib/Analysis/LocallyConvex/AbsConvex.lean,Mathlib/Analysis/LocallyConvex/BalancedCoreHull.lean,Mathlib/Analysis/LocallyConvex/Basic.lean,Mathlib/Topology/Algebra/Group/Pointwise.lean,Mathlib/Topology/Baire/Absorbent.lean,Mathlib/Topology/Bornology/Absorbs.lean,Mathlib/Topology/MetricSpace/Bounded.lean |
8 |
10 |
['felixpernegger', 'github-actions', 'khwilson', 'mcdoll', 'scholzhannah'] |
mcdoll assignee:mcdoll |
0-49313 13 hours ago |
1-82945 1 day ago |
41-73914 41 days |
| 42517 |
khwilson author:khwilson |
refactor(Analysis/LocallyConvex): state hulls via ClosureOperator |
Restate `balancedHull` and the neighborhood bases of the origin in terms of the `ClosureOperator` API, and add the general lemmas that make this possible:
* `ClosureOperator.closure_binop_le`: a closure operator is sub-`f` for any monotone binary operation `f` whose closed elements are stable under `f`; `balancedHull_add_subset` and `absConvexHull_add_subset` are instances.
* `Filter.HasBasis.and_isClosed`: combine a basis of `p`-sets with a basis of `c`-closed sets when `c` preserves `p`.
* `Topology.closureOperator`: topological closure, bundled.
* `Balanced.sUnion`, and `Balanced.closure` generalized to `SeminormedRing`.
`balancedCore` keeps its definition as a union of balanced subsets, but its API is now derived from the hull side; `balancedCoreAux` is removed in favour of lemmas stated directly about `⋂ (r : 𝕜) (_ : 1 ≤ ‖r‖), r • s`. The new `nhds_basis_open_balanced` joins `nhds_basis_closed_balanced`, `nhds_hasBasis_absConvex_open` and `nhds_hasBasis_absConvex_closed`, all four proved through `and_isClosed`.
AI Disclosure: Much of the refactoring work across files was performed by Claude Opus 5 after being given examples I wrote.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
170/126 |
Mathlib/Analysis/LocallyConvex/AbsConvex.lean,Mathlib/Analysis/LocallyConvex/BalancedCoreHull.lean,Mathlib/Analysis/LocallyConvex/Basic.lean,Mathlib/Order/Closure.lean,Mathlib/Order/Filter/Bases/Basic.lean,Mathlib/Topology/Closure.lean |
6 |
2 |
['github-actions', 'khwilson'] |
nobody |
0-46863 13 hours ago |
0-49448 13 hours ago |
0-49436 13 hours |
| 42227 |
kebekus author:kebekus |
feat: API for (co)discrete sets |
Establish simple but useful API for dealing with (co)discrete sets.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
maintainer-merge
|
125/2 |
Mathlib/Algebra/Polynomial/Roots.lean,Mathlib/Analysis/Calculus/Deriv/Basic.lean,Mathlib/Analysis/Calculus/FDeriv/Congr.lean,Mathlib/Topology/Algebra/Polynomial.lean,Mathlib/Topology/DiscreteSubset.lean |
5 |
36 |
['CoolRmal', 'felixpernegger', 'github-actions', 'kebekus'] |
nobody |
0-46537 12 hours ago |
1-43094 1 day ago |
9-2496 9 days |
| 42221 |
mcdoll author:mcdoll |
feat(Data/FunLike): add `IsTorsionFree` theorems |
Needed for `Finsupp` and `MeasureTheory.Measure`
The lemma about torsion-free monoids was contributed in #24312.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
large-import
maintainer-merge
|
53/12 |
Mathlib.lean,Mathlib/Algebra/Group/Finsupp.lean,Mathlib/Algebra/Group/Pi/Lemmas.lean,Mathlib/Algebra/Group/Pi/Torsion.lean,Mathlib/Algebra/Order/Antidiag/Pi.lean,Mathlib/Data/FunLike/Group.lean,Mathlib/Data/FunLike/Module.lean |
7 |
9 |
['github-actions', 'grunweg', 'joneugster', 'mcdoll'] |
joneugster assignee:joneugster |
0-45501 12 hours ago |
4-58387 4 days ago |
9-42807 9 days |
| 40855 |
NoahW314 author:NoahW314 |
feat(Data/ENNReal): add `sum_div` |
`Finset.sum_div` does not apply since `ℝ≥0∞` is not a `DivisionSemiring`. Although the proof of `Finset.sum_div` (and of this lemma) only needs `DivInvMonoid` and `NonUnitalNonAssocSemiring`, the best typeclass including these is `DivisionSemiring`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
Removed the `open ENNReal` in `MeanInequalities` to avoid ambiguity with `Finset.sum_div`.
|
t-data
maintainer-merge
|
7/1 |
Mathlib/Analysis/MeanInequalities.lean,Mathlib/Data/ENNReal/BigOperators.lean |
2 |
8 |
['NoahW314', 'SnirBroshi', 'github-actions', 'joneugster', 'madvorak'] |
joneugster assignee:joneugster |
0-43371 12 hours ago |
4-52320 4 days ago |
47-64296 47 days |
| 42518 |
theebayuser author:theebayuser |
feat(Geometry/Euclidean): add the British flag theorem |
Adds the British flag theorem to `Mathlib/Geometry/Euclidean/`
The rectangle is expressed as a parallelogram, the diagonals `a c` and
`b d` share a midpoint with a right angle at a.
Main results
* `EuclideanGeometry.dist_sq_add_dist_sq_eq_dist_sq_add_dist_sq_of_angle_eq_pi_div_two` —
the British flag theorem.
* `EuclideanGeometry.dist_sq_add_dist_sq_eq_dist_sq_add_dist_sq_iff_angle_eq_pi_div_two` —
the if-and-only-if form: among parallelograms the identity characterises rectangles. It needs
no nondegeneracy hypotheses, thanks to the `angle 0 v = π / 2` convention.
* `EuclideanGeometry.dist_sq_add_dist_sq_eq_dist_sq_add_dist_sq_add_two_mul_dist_mul_dist_mul_cos_angle`
— a generalisation to arbitrary parallelograms with a law-of-cosines correction term.
* `InnerProductGeometry.norm_sq_add_norm_sub_add_sq_eq_norm_sub_sq_add_norm_sub_sq_add_two_inner`
and its `…_iff_inner_eq_zero` corollary — the underlying inner-product identity, in the vector
layer.
AI disclosure
This contribution was developed with assistance from Claude Code.
|
t-euclidean-geometry
new-contributor
LLM-generated
|
117/0 |
Mathlib.lean,Mathlib/Geometry/Euclidean/BritishFlag.lean,docs/1000.yaml |
3 |
3 |
['github-actions', 'theebayuser'] |
nobody |
0-42993 11 hours ago |
0-47532 13 hours ago |
0-47520 13 hours |
| 42520 |
mo271 author:mo271 |
refactor(Data/Finset/Sups): rename `powerset_union/inter` |
... to `powerset_sups/infs`
Rename `Finset.powerset_union` to `Finset.powerset_sups` and `Finset.powerset_inter` to `Finset.powerset_infs` to reflect that they compute pointwise operations `⊻` and `⊼`.
Add deprecation aliases.
A follow-up (#42521) will add `Finset.powerset_inter` back (with a different meaning).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
13/8 |
Mathlib/Data/Finset/Sups.lean |
1 |
2 |
['github-actions'] |
nobody |
0-40507 11 hours ago |
0-43087 11 hours ago |
0-43075 11 hours |
| 41740 |
themathqueen author:themathqueen |
chore(Topology/Algebra/LinearMapCompletion): generalize `UniformSpace.Completion.toComplL` |
Generalize and move `toComplL` to a more appropriate file.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
(`toCompl`, `toComplL`, `toComplₗᵢ`, etc... aren't great names in my opinion, but that's a separate issue for another time)
(In another PR (maybe sometime in the near future), we should make the variables R and α explicit for `toCompl`, `toComplL`, and `toComplₗᵢ`.)
[](https://gitpod.io/from-referrer/)
|
t-topology
maintainer-merge
|
26/20 |
Mathlib/Analysis/InnerProductSpace/Reproducing.lean,Mathlib/Analysis/Normed/Module/Completion.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/DistLEIntegral.lean,Mathlib/Topology/Algebra/LinearMapCompletion.lean |
4 |
6 |
['TJHeeringa', 'github-actions', 'mathlib-merge-conflicts', 'scholzhannah', 'themathqueen'] |
scholzhannah assignee:scholzhannah |
0-39802 11 hours ago |
2-14556 2 days ago |
23-38081 23 days |
| 41361 |
lakesare author:lakesare |
feat(Order/ConditionallyCompleteLattice/Finset): add `sup_eq_ciSup` |
From the Carleson project.
___
**Upstreaming from Carleson: [/Carleson/ToMathlib/Data/Finset/Lattice/Fold.lean](https://github.com/fpvandoorn/carleson/blob/a3e427dc0f23f6b818c7f7d32f2b1d2ccfab1f21/Carleson/ToMathlib/Data/Finset/Lattice/Fold.lean)**
Changes from the Carleson version:
1. `sup_eq_iSup'` is refactored (to shorten the proof & to make some of the imports unnecessary)
2. `sup_eq_iSup'` is renamed to `sup_eq_ciSup`
3. Carleson-suggested file was `/Data/Finset/Lattice/Fold.lean`, but we placed the theorem into `/Order/ConditionallyCompleteLattice/Finset.lean`
|
carleson
new-contributor
t-order
maintainer-merge
|
8/9 |
Mathlib/Order/ConditionallyCompleteLattice/Finset.lean |
1 |
21 |
['SnirBroshi', 'github-actions', 'j-loreaux', 'lakesare', 'themathqueen'] |
nobody |
0-36134 10 hours ago |
0-50736 14 hours ago |
18-63803 18 days |
| 40995 |
WilliamCoram author:WilliamCoram |
feat: epsilon dense implies dense |
We follow BGR - Nonarchimedean analysis and introduce the definition of a subgroup being epsilon dense. Then prove this implies dense (Prop 1.1.4./2)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
24/0 |
Mathlib/Topology/MetricSpace/HausdorffDistance.lean |
1 |
16 |
['WilliamCoram', 'github-actions', 'j-loreaux'] |
j-loreaux assignee:j-loreaux |
0-35856 9 hours ago |
0-35856 9 hours ago |
34-6712 34 days |
| 26479 |
thefundamentaltheor3m author:thefundamentaltheor3m |
feat(Analysis/Complex/CauchyIntegral): Cauchy–Goursat for Unbounded Rectangles |
In this PR, we prove versions of the Cauchy-Goursat theorem where the contours in question are rectangular and unbounded (ie, where the contours look like the $\bigsqcup$ symbol). I am not sure if I have formalised these in the best way, or if `Analysis.Complex.CauchyIntegral` is the best place for them (it might be prudent to reorganise the file into multiple files at some point), but I believe this is a useful result. Suggestions welcome.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-analysis
sphere-packing
|
176/0 |
Mathlib/Analysis/Complex/CauchyIntegral.lean |
1 |
34 |
['github-actions', 'j-loreaux', 'loefflerd', 'mathlib4-merge-conflict-bot', 'thefundamentaltheor3m', 'themathqueen', 'wwylele'] |
j-loreaux assignee:j-loreaux |
0-35141 9 hours ago |
0-35802 9 hours ago |
87-16904 87 days |
| 42509 |
attilavjda author:attilavjda |
chore(Analysis/Normed/Lp/PiLp): fix stale docstring cross-references |
The docstrings of `PiLp.nnnorm_toLp_const` and `PiLp.norm_toLp_const'` still referred to
`PiLp.nnnorm_equiv_symm_const'` and `PiLp.norm_equiv_symm_const`, which no longer exist after
the `equiv_symm` -> `toLp` rename. Also fix a line wrap that split a sentence with a stray
full stop.
[Found the errors with Aristotle, it generated, verified, and made guides to the solution](https://github.com/attilavjda/formal-contributions/blob/main/analysis-pilp-docstrings/RequestProject/PiLpConstNorm.lean)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
3/5 |
Mathlib/Analysis/Normed/Lp/PiLp.lean |
1 |
1 |
['github-actions'] |
nobody |
0-34718 9 hours ago |
0-83779 23 hours ago |
0-83767 23 hours |
| 42500 |
ocfnash author:ocfnash |
feat: a base for the root system of a Lie algebra can be promoted to a basis |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
201/5 |
Mathlib/Algebra/Lie/Basis/Base.lean,Mathlib/Algebra/Lie/Subalgebra.lean,Mathlib/Algebra/Lie/Weights/Killing.lean,Mathlib/Algebra/Lie/Weights/RootSystem.lean,Mathlib/Algebra/Module/LinearMap/Defs.lean |
5 |
1 |
['github-actions'] |
nobody |
0-34683 9 hours ago |
1-17612 1 day ago |
1-17600 1 day |
| 42507 |
yuanyi-350 author:yuanyi-350 |
feat(Topology/MetricSpace): prove Caristi's fixed-point theorem |
|
t-topology |
77/2 |
Mathlib/Topology/MetricSpace/Contracting.lean |
1 |
1 |
['github-actions'] |
CoolRmal assignee:CoolRmal |
0-34560 9 hours ago |
1-4207 1 day ago |
1-4195 1 day |
| 42524 |
YanYablonovskiy author:YanYablonovskiy |
feat(MeasureTheory): `fun_prop` for `integrable_stoppedValue` |
Adding `fun_prop` tag , part of WIP in golfing proof of OST at [BM#450](https://github.com/RemyDegenne/brownian-motion/pull/450
)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
easy
|
1/0 |
Mathlib/Probability/Process/Stopping.lean |
1 |
2 |
['YanYablonovskiy', 'github-actions'] |
nobody |
0-34500 9 hours ago |
0-36505 10 hours ago |
0-36493 10 hours |
| 42511 |
chiyunhsu author:chiyunhsu |
feat(NumberTheory/Padics/PadicVal/Basic): Locally square rational numbers are squares |
Co-authored-by: María Inés de Frutos-Fernández <midff@math.uni-bonn.de>
---
In the ongoing formalization of Hasse-Minkowski Theorem on quadratic forms, we need the fact that a non-negative rational number having even p-adic valuations for all prime p is a square. This is added as `isSquare_of_even_factorization` in the `Rat` namespace in NumberTheory/Padics/PadicVal/Basic.lean in the PR. Also add preliminary lemmas`num_or_den_zero_padicVal` `num_den_even_padicVal_of_even_padicVal`.
As preliminary results, add analogous theorems for natural numbers and integers `Nat.isSquare_of_even_factorization` `Int.isSquare_of_nonneg_of_even_factorization` in Data/Nat/Factorization/Defs.lean.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
60/0 |
Mathlib/Data/Nat/Factorization/Defs.lean,Mathlib/NumberTheory/Padics/PadicVal/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
0-34324 9 hours ago |
0-81400 22 hours ago |
0-81388 22 hours |
| 42510 |
williamjblair author:williamjblair |
feat(NumberTheory/AdditionChain): addition chains and the doubling bound |
An addition chain for `n` is a strictly increasing list `1 = a₀ < a₁ < ⋯ < a_r = n` in which every entry after the first is a sum of two earlier entries. `Nat.additionChainLength n` is the least `r` over all such chains, the classical `ℓ(n)`.
`additionChainLength` is an `sInf` over `List ℕ`, so an explicit chain bounds it above (`Nat.additionChainLength_le`), but nothing bounds it below until the search is confined. `List.IsAdditionChain.getLast_le_two_pow` confines it: a step at most doubles, so `r` steps cannot reach past `2 ^ r`. That gives `Nat.lt_additionChainLength_of_two_pow_lt`, and the two bounds together pin down individual values.
`Nat.exists_isAdditionChain` shows every positive `n` ends some chain, so the length is a minimum of a nonempty set rather than `sInf ∅`.
---
Mathlib has nothing on addition chains at present. This came out of [formal-conjectures](https://github.com/google-deepmind/formal-conjectures), where it underlies the Scholz conjecture.
I could not run `scripts/lint-bib.sh` locally (no `bibtool`), so the new `knuth1997` entry is formatted by hand to match its neighbours.
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
256/0 |
Mathlib.lean,Mathlib/NumberTheory/AdditionChain.lean,docs/references.bib |
3 |
0 |
[] |
nobody |
0-34309 9 hours ago |
0-83417 23 hours ago |
0-83405 23 hours |
| 42522 |
mo271 author:mo271 |
feat(Data/Finset/Powerset): disjointness lemmas for `powersetCard` |
Add disjointness lemmas for `Finset.powersetCard`:
- `Disjoint.powersetCard_powersetCard`: `powersetCard` of disjoint sets are disjoint for positive cardinality
- `Finset.disjoint_powersetCard_of_ne`: `powersetCard` of distinct cardinalities are disjoint
- Simplify some proofs using `disjoint_powersetCard_of_ne`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
19/4 |
Mathlib/Data/Finset/Powerset.lean,Mathlib/LinearAlgebra/Multilinear/Basic.lean |
2 |
1 |
['github-actions'] |
CoolRmal assignee:CoolRmal |
0-33800 9 hours ago |
0-41641 11 hours ago |
0-41629 11 hours |
| 42110 |
Zeta-Wu author:Zeta-Wu |
feat: add path length for paths in pseudo emetric spaces |
This PR defines the length of a path in a `PseudoEMetricSpace` as its variation on the unit interval.
It proves the basic properties of path length:
- the endpoint distance is bounded by the length;
- the constant path has length zero;
- reversing a path preserves its length;
- concatenating two paths adds their lengths.
Main declarations:
- `Path.length`
- `Path.edist_le_length`
- `Path.length_refl`
- `Path.length_symm`
- `Path.length_trans`
This is intended as a first step toward a broader theory of rectifiable paths, including later results on invariance of length under monotone reparametrization, and shortest paths are line segments up to monotone reparametrization in strict convex spaces.
This PR was discussed on Zulip [here](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/PR.20.2342110.3A.20Path.2Elength.20in.20PseudoEMetricSpace).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
|
190/0 |
Mathlib.lean,Mathlib/Topology/EMetricSpace/PathLength.lean |
2 |
60 |
['CoolRmal', 'Zeta-Wu', 'felixpernegger', 'github-actions', 'pelicanhere', 'scholzhannah'] |
scholzhannah assignee:scholzhannah |
0-33308 9 hours ago |
9-60314 9 days ago |
11-29496 11 days |
| 42527 |
joelriou author:joelriou |
feat(CategoryTheory/Groupoid): various induction principles for morphisms |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
57/0 |
Mathlib/AlgebraicTopology/SimplicialSet/HomotopyCat.lean,Mathlib/CategoryTheory/Groupoid/FreeGroupoid.lean,Mathlib/CategoryTheory/Groupoid/FreeGroupoidOfCategory.lean |
3 |
1 |
['github-actions'] |
nobody |
0-32904 9 hours ago |
0-33491 9 hours ago |
0-33479 9 hours |
| 41051 |
tb65536 author:tb65536 |
feat(FieldTheory/PolynomialGaloisGroup): add equivariant bijection between root sets |
Currently the bijection `rootsEquivRoots` between root sets of a polynomial that splits is not equivariant with respect to the action of the Galois group. This PR demotes the existing `rootsEquivRoots` to an auxilliary def `rootsEquivRootsAux` and adds an equivariant `rootsEquivRoots` in its place.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-ring-theory
label:t-algebra$ |
32/18 |
Mathlib/FieldTheory/PolynomialGaloisGroup.lean |
1 |
3 |
['github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
0-31976 8 hours ago |
0-32553 9 hours ago |
42-44853 42 days |
| 42292 |
stevenliuyi author:stevenliuyi |
feat(Probability/Kernel/Composition): kernel Radon-Nikodym derivative of composition products |
This PR resolves the TODO in this file by adding `rnDeriv_measure_compProd_right` and `rnDeriv_measure_compProd`, which replace `∂(μ ⊗ₘ κ)/∂(μ ⊗ₘ η)` by `∂κ/∂η` under the suitable assumptions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
large-import
new-contributor
maintainer-merge
|
56/7 |
Mathlib/Probability/Kernel/Composition/RadonNikodym.lean |
1 |
12 |
['EtienneC30', 'github-actions', 'stevenliuyi'] |
EtienneC30 assignee:EtienneC30 |
0-30812 8 hours ago |
0-51791 14 hours ago |
7-1176 7 days |
| 42338 |
D-Thomine author:D-Thomine |
chore(MeasureTheory): Move lemmas and deprecate duplicates |
This PR moves a few lemmas around in `MeasureTheory.Measure`; basically, if a lemma can be expressed and proved elementarily, it is moved upstream. For instance, if a lemma has `μ ≤ ν` has an hypothesis, it may be proved as a special case of a lemma about absolutely continuous measures, but may also be proved as easily by more elementary considerations, which means it can be moved to more suitable files upstream (e.g. to `MeasureTheory.Measure.MeasureSpace` instead of `MeasureTheory.Measure.AbsolutelyContinuous`).
This also slightly simplifies imports and allowed me to detect two exact duplicates.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
77/68 |
Mathlib/Dynamics/Ergodic/RadonNikodym.lean,Mathlib/MeasureTheory/Group/Prod.lean,Mathlib/MeasureTheory/Measure/AEMeasurable.lean,Mathlib/MeasureTheory/Measure/AbsolutelyContinuous.lean,Mathlib/MeasureTheory/Measure/Comap.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/NullMeasurable.lean,Mathlib/MeasureTheory/Measure/QuasiMeasurePreserving.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/MeasureTheory/Measure/WithDensity.lean |
11 |
2 |
['EtienneC30', 'github-actions'] |
EtienneC30 assignee:EtienneC30 |
0-30769 8 hours ago |
6-8361 6 days ago |
6-8349 6 days |
| 42339 |
attilavjda author:attilavjda |
feat: add diagonal iSup and iInf lemmas |
Adds generic lemmas collapsing a cofinal double iSup/iInf to its diagonal, then uses them to simplify the corresponding ENat and ENNReal addition proofs.
Adds conditionally complete version with `hf : BddAbove (range fun k ↦ f k k)`. Dropping [Nonempty ι] (both sides are sSup ∅ when empty) makes the `…Bot` copy the same statement
```
CompleteSemilatticeSup
|
+--> iSup₂_eq_iSup_diagonal
|
+--> ENat.iSup_add_iSup
+--> ENNReal.iSup_add_iSup
+--> ENNReal.iInf_add_iInf (via dual)
ConditionallyCompleteLattice
|
+--> ciSup₂_eq_ciSup_diagonal
```
Aristotle helped
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
new-contributor
LLM-generated
|
36/17 |
Mathlib/Data/ENNReal/Operations.lean,Mathlib/Data/ENat/Lattice.lean,Mathlib/Order/CompleteLattice/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Indexed.lean |
4 |
13 |
['SnirBroshi', 'attilavjda', 'github-actions', 'vihdzp'] |
nobody |
0-30042 8 hours ago |
2-10263 2 days ago |
3-77072 3 days |
| 41723 |
luigi-massacci author:luigi-massacci |
feat: classical distributions induced by a locally integrable function |
Analogous to the results for Tempered Distributions.
Part of a series of PRs about induced distributions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
large-import
|
127/1 |
Mathlib/Analysis/Distribution/Distribution.lean,Mathlib/Analysis/Distribution/TestFunction.lean,docs/references.bib |
3 |
1 |
['github-actions'] |
ADedecker assignee:ADedecker |
0-30015 8 hours ago |
24-36297 24 days ago |
24-36561 24 days |
| 42409 |
alreadydone author:alreadydone |
doc(CategoryTheory): fix three typos |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
documentation
t-category-theory
easy
|
3/3 |
Mathlib/CategoryTheory/Functor/Derived/LeftDerived.lean,Mathlib/CategoryTheory/Functor/Derived/RightDerived.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/Categorical/Basic.lean |
3 |
1 |
['github-actions'] |
nobody |
0-29553 8 hours ago |
0-30138 8 hours ago |
3-33796 3 days |
| 42502 |
pepamontero author:pepamontero |
feat(Geometry/Manifold): chart conjugates of self-diffeomorphisms are compatible |
Add two lemmas showing that conjugating a self-diffeomorphism `f : OpenPartialHomeomorph M M` (i.e. `f` and `f.symm` are `ContMDiffOn` their respective domains) by two charts from the maximal atlas produces a map that
- lies in the maximal atlas (`symm_trans_trans_mem_maximalAtlas_of_contMDiffOn`) and
- satisfies the contDiffGroupoid n I compatibility condition (`symm_trans_trans_mem_contDiffGroupoid_of_contMDiffOn`)
The latter is used in [#40727](https://github.com/leanprover-community/mathlib4/pull/40727) to show that `orbitRel.Quotient G M` is a manifold when `G` acts by `ContMDiffSMul`: the quotient's chart transition maps locally agree with a group element's smul action `g0 • ·` conjugated by charts on M, and `symm_trans_trans_mem_contDiffGroupoid_of_contMDiffOn` shows this conjugate lies in `contDiffGroupoid n I`, which helps us conclude local compatibility.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
23/0 |
Mathlib/Geometry/Manifold/ContMDiff/Atlas.lean |
1 |
1 |
['github-actions'] |
nobody |
0-28234 7 hours ago |
0-28895 8 hours ago |
0-38782 10 hours |
| 41808 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add API lemmas in Representation.induced for making IndV.mk a def |
The current `IndV.mk` is an abbrev and `ind` has an @[simp] lemma `ind_apply`, so `simp` would expose the implementation and unfold the simple representation theoretic expressions into nasty linear algebra compounds consisting of MonoidAlgebra.single/TensorProduct/Coinvariant/.lift/.mk. The purpose of this PR is to seal `IndV.mk` and `ind_apply` off so that we can use simpler API lemmas and say goodbye to 20+ lines goals in the InfoView.
We address the issue by making `IndV.mk` a def and adding a new core def`IndV.lift`:
1) Making `IndV.mk` a def will allow the desired API lemmas `IndV.mk_map_mul` `IndV.mk_map_inv_mul` `IndV.mk_map_mem_eq` `IndV.mk_map_inv_eq` to have the desired @[simp] behaviour (previously simp would unfold `IndV.mk`, so @[simp] would not invoke these lemmas). We also add a useful `IndV.induction_on` lemma for reducing Prop to elementary generators and addition.
2) `IndV.lift`, which is a def, gives a way to construct a linear map from a family of linear maps on elementary generators. It unifies the previous constructions in both `ind` and `coinvariantsTensorInd`. Moreover, it turns out a single @[simp] lemma `IndV.lift_apply_IndVMk` is good enough while previously we had the annoying @[simps] above `ind` unfolding several linear algebra layers at once. We then make `ind` simply an abbrev using `IndV.lift`, without additional API lemmas.
As an immediate payoff, the definitions and proofs around `ind`, `indResHomEquiv` and `coinvariantTensorInd` becomes much cleaner.
This also has very direct downstream benefit in smooth representation theory: `ind` packages both induction and coinvariant in a single functor and these API lemmas will serve both of Hecke modules and Jacquet modules. |
t-algebra
new-contributor
label:t-algebra$ |
102/61 |
Mathlib/RepresentationTheory/FiniteIndex.lean,Mathlib/RepresentationTheory/Induced.lean |
2 |
2 |
['github-actions'] |
nobody |
0-27786 7 hours ago |
0-31612 8 hours ago |
22-40545 22 days |
| 41383 |
joelriou author:joelriou |
feat(Algebra/Category/ModuleCat): the category of sheaves of modules is Grothendieck abelian |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
maintainer-merge
|
127/5 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Generator.lean,Mathlib/AlgebraicGeometry/Modules/Sheaf.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/CategoryTheory/Abelian/GrothendieckAxioms/PresheafOfModules.lean,Mathlib/CategoryTheory/Abelian/GrothendieckAxioms/SheafOfModules.lean,Mathlib/CategoryTheory/Generator/Basic.lean |
7 |
3 |
['alreadydone', 'github-actions'] |
nobody |
0-26927 7 hours ago |
0-27618 7 hours ago |
33-17802 33 days |
| 42513 |
plp127 author:plp127 |
feat(ModelTheory): typeclass for theory to have nonempty models |
We add a typeclass for a theory to have nonempty models. We provide instances for `nonemptyTheory`, `infiniteTheory`, and `completeTheory`.
---
- [x] depends on: #42508
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
51/0 |
Mathlib/ModelTheory/Algebra/Ring/Basic.lean,Mathlib/ModelTheory/Semantics.lean |
2 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
0-26013 7 hours ago |
0-33492 9 hours ago |
0-36030 10 hours |
| 42528 |
joelriou author:joelriou |
chore(CategoryTheory): `implicit_reducible` for compositions of natural transformations |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
easy
maintainer-merge
|
2/2 |
Mathlib/CategoryTheory/Functor/Category.lean,Mathlib/CategoryTheory/NatTrans.lean |
2 |
4 |
['github-actions', 'joelriou', 'leanprover-radar', 'robin-carlier'] |
nobody |
0-20182 5 hours ago |
0-32940 9 hours ago |
0-32928 9 hours |
| 40582 |
dennj author:dennj |
feat(Analysis): the one-sided Laplace transform |
Introducing Laplace transform `ℒ(f)(s) = ∫ t in Ioi 0, exp (-s * t) • f t`
It is needed in physlib
I modelled the file following Mellin transform.
## Main definitions
* `LaplaceConvergent f s`: the Laplace integral is well-defined at `s`.
* `laplace f s`: the Laplace transform, a total function
* `HasLaplace f s m`: convergence together with the value `m`.
## Main results
* Linearity: `laplace_add`/`sub`/`const_smul`/`neg`/`zero`/`div_const`, at the `laplace`, `LaplaceConvergent`, and `HasLaplace` levels.
* `laplaceConvergent_iff_norm`, `norm_laplace_le_integral_norm`: reduction of convergence and norm bounds to the real exponential weight.
* `laplaceConvergent_of_isBigO_exp`: existence for functions of exponential order, on the appropriate right half-plane.
* `LaplaceConvergent.of_re_le`/`of_re_lt`: monotonicity of convergence in `s.re` (the half-plane structure).
* `laplace_cexp_smul`: the frequency-shift rule.
* `laplace_indicator_comp_sub`: the time-shift rule.
* `laplace_comp_mul_left`/`right`: behaviour under positive dilation.
* `hasLaplace_const`/`hasLaplace_one`/`hasLaplace_cexp`: basic transform values.
Human made PR |
t-measure-probability
new-contributor
|
677/1 |
Mathlib.lean,Mathlib/Analysis/LaplaceTransform.lean,Mathlib/MeasureTheory/Integral/ExpDecay.lean |
3 |
33 |
['AlyciaBHZ', 'EtienneC30', 'dennj', 'github-actions', 'mathlib-splicebot'] |
EtienneC30 assignee:EtienneC30 |
0-18816 5 hours ago |
1-16557 1 day ago |
53-61592 53 days |
| 40040 |
JovanGerb author:JovanGerb |
chore(Order/Bounds/Basic): add missing `to_dual` tags |
This PR adds some `to_dual` tags that weren't added in #35208
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
12/14 |
Mathlib/Order/Bounds/Basic.lean |
1 |
2 |
['github-actions', 'madvorak', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
0-16677 4 hours ago |
0-19641 5 hours ago |
68-62778 68 days |
| 41558 |
JovanGerb author:JovanGerb |
chore(order/ConditionallyCompleteLattice): use `to_dual` more |
This PR uses `to_dual` in most remaining places in `Mathlib.Order.ConditionallyCompleteLattice.Basic`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
77/185 |
Mathlib/Order/ConditionallyCompleteLattice/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Defs.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
0-16343 4 hours ago |
0-19757 5 hours ago |
28-6270 28 days |
| 42531 |
mathlib-splicebot author:mathlib-splicebot |
chore(MeasureTheory/Integral/ExpDecay): automated extraction from #40582 |
If a function has exponential growth at most then multiplying by a stronger exponential makes it integrable at infinity.
---
This PR was automatically created from PR #40582 by @dennj via a [review comment](https://github.com/leanprover-community/mathlib4/pull/40582#discussion_r3735267224) by @EtienneC30. |
t-measure-probability |
25/1 |
Mathlib/MeasureTheory/Integral/ExpDecay.lean |
1 |
6 |
['dennj', 'github-actions', 'mathlib-splicebot', 'sgouezel'] |
nobody |
0-15328 4 hours ago |
0-15353 4 hours ago |
0-15586 4 hours |
| 42533 |
attilavjda author:attilavjda |
chore(Analysis/SpecialFunctions/Pow/Real): deprecate six misnamed duplicate log/rpow lemmas |
6 `Pow/Real.lean` lemmas duplicate with misleading names, replace by deprecated aliases
Some of these deprecated lemmas names, or their intended proofs seem mixed up too, which could be updated perhaps after the deprecation period?
[Used Aristotle in making this PR. It found the duplicates, generated guidance, example code, and verifications.](https://github.com/attilavjda/formal-contributions/blob/main/analysis-rpow-dedup/RpowLogDedup.lean)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
new-contributor
|
6/20 |
Mathlib/Analysis/SpecialFunctions/Pow/Real.lean |
1 |
3 |
['github-actions', 'wwylele'] |
nobody |
0-15216 4 hours ago |
0-24148 6 hours ago |
0-24136 6 hours |
| 36218 |
Brian-Nugent author:Brian-Nugent |
feat(CategoryTheory): Add exact sequences for Sheaf Cohomology |
In this PR, I add the long exact sequence for sheaf cohomology as well as prove that it is functorial. Since sheaf cohomology is defined in terms of `Ext`, this is done using the covariant sequence for `Ext`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #34742
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
238/1 |
Mathlib.lean,Mathlib/Algebra/Homology/SpectralObject/Page.lean,Mathlib/CategoryTheory/ComposableArrows/Basic.lean,Mathlib/CategoryTheory/Sites/SheafCohomology/ExactSequences.lean |
4 |
42 |
['Brian-Nugent', 'dagurtomas', 'github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
robin-carlier assignee:robin-carlier |
0-13716 3 hours ago |
0-13716 3 hours ago |
49-25334 49 days |
| 42291 |
JovanGerb author:JovanGerb |
feat: generalize transfer instance type class assumptions |
This PR refactors various declarations that are used for transporting instances or definitions along equivalences. The idea is to avoid using local instances with `letI` in places where we can assume an arbitrary instance instead, because otherwise these declarations can only be used in situations where the global instance is defeq to the one introduced by `letI`. In many cases this means that the equivalence needs to be an `AddEquiv` or `LinearEquiv` instead of an `Equiv`. This is not an issue in practice, because it is typically easy to construct this richer equivalence.
It would be possible to keep both styles of transporting declarations, but I think that would be more confusing.
This PR is a prerequisite for #41362 (no_exposing some operations in `MonoidAlgebra`), because to use the old `Equiv.distribMulAction` we need the `MonoidAlgebra` instances to be exposed.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
201/277 |
Mathlib/Algebra/Algebra/Unitization.lean,Mathlib/Algebra/Category/Grp/Colimits.lean,Mathlib/Algebra/Category/ModuleCat/Topology/Basic.lean,Mathlib/Algebra/Group/Shrink.lean,Mathlib/Algebra/GroupWithZero/Action/TransferInstance.lean,Mathlib/Algebra/GroupWithZero/Shrink.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/Linear.lean,Mathlib/Algebra/Lie/Extension.lean,Mathlib/Algebra/Lie/SemiDirect.lean,Mathlib/Algebra/Lie/TransferInstance.lean,Mathlib/Algebra/Module/Shrink.lean,Mathlib/Algebra/Module/TransferInstance.lean,Mathlib/Algebra/MonoidAlgebra/Defs.lean,Mathlib/Algebra/MonoidAlgebra/Module.lean,Mathlib/Algebra/Polynomial/Module/Basic.lean,Mathlib/Algebra/Quaternion.lean,Mathlib/Algebra/WithConv.lean,Mathlib/Analysis/LocallyConvex/WeakOperatorTopology.lean,Mathlib/Analysis/Normed/Lp/WithLp.lean,Mathlib/Analysis/Normed/Module/Shrink.lean,Mathlib/Analysis/Normed/Module/TransferInstance.lean,Mathlib/Analysis/Normed/Ring/WithAbs.lean,Mathlib/CategoryTheory/Linear/Basic.lean,Mathlib/Geometry/Manifold/Immersion.lean,Mathlib/Geometry/Manifold/Submersion.lean,Mathlib/LinearAlgebra/TensorProduct/Associator.lean,Mathlib/LinearAlgebra/TensorProduct/Map.lean,Mathlib/RepresentationTheory/Continuous/TopRep.lean,Mathlib/RingTheory/Coalgebra/Basic.lean,Mathlib/RingTheory/Coalgebra/MonoidAlgebra.lean,Mathlib/RingTheory/OrzechProperty.lean,Mathlib/Topology/Algebra/Module/TransferInstance.lean,Mathlib/Topology/Algebra/Valued/WithVal.lean |
33 |
6 |
['JovanGerb', 'github-actions', 'leanprover-radar', 'mathlib-merge-conflicts'] |
nobody |
0-13152 3 hours ago |
0-15707 4 hours ago |
7-19133 7 days |
| 42514 |
SnirBroshi author:SnirBroshi |
feat(Analysis/Complex/IsIntegral): `I` is integral over any `CommRing` |
We have separate theorems for `ℤ` and `ℚ`, but one is enough for all rings.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
easy
t-analysis
|
12/10 |
Mathlib/Analysis/Complex/IsIntegral.lean,Mathlib/NumberTheory/Niven.lean |
2 |
7 |
['SnirBroshi', 'github-actions', 'themathqueen'] |
nobody |
0-12398 3 hours ago |
0-13825 3 hours ago |
0-51371 14 hours |
| 42539 |
NoahW314 author:NoahW314 |
chore(Algebra/Order/GroupWithZero/Canonical): remove unnecessary typeclass assumptions |
`IsReduced` and `NoZeroDivisors` can already be inferred from `LinearOrderedCommMonoidWithZero`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
easy
|
1/3 |
Mathlib/Algebra/Order/GroupWithZero/Canonical.lean,Mathlib/RingTheory/Valuation/Basic.lean |
2 |
2 |
['NoahW314', 'github-actions'] |
nobody |
0-12137 3 hours ago |
0-14605 4 hours ago |
0-14593 4 hours |
| 42512 |
SnirBroshi author:SnirBroshi |
feat(Order/Interval/Set/Disjoint): generalize `⋃ x ∈ s, Iic x = Iic a` from `LinearOrder` to `Preorder` |
and add an `IsLeast` version.
---
(yes more stuff here could be `to_dual`ized, but that's a separate issue)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
25/11 |
Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/Interval/Set/Disjoint.lean |
2 |
6 |
['SnirBroshi', 'github-actions', 'themathqueen'] |
nobody |
0-9542 2 hours ago |
0-12587 3 hours ago |
0-56252 15 hours |
| 42541 |
NoahW314 author:NoahW314 |
feat: add `CharZero`/`CharP` instances on `OrderDual` and `Lex` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
11/1 |
Mathlib/Algebra/Order/Ring/Synonym.lean,Mathlib/LinearAlgebra/Eigenspace/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
0-8487 2 hours ago |
0-10907 3 hours ago |
0-12653 3 hours |
| 42542 |
tb65536 author:tb65536 |
feat(Analysis/Normed/Field/WithAbs): algebra structure on `AbsoluteValue.Completion` |
This PR defines the algebra structure on `AbsoluteValue.Completion`. This is in preparation for general ramification theory of absolute values.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
52/5 |
Mathlib/Analysis/Normed/Field/WithAbs.lean,Mathlib/Topology/Algebra/Ring/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
0-8290 2 hours ago |
0-9940 2 hours ago |
0-10901 3 hours |
| 42538 |
NoahW314 author:NoahW314 |
feat: add Semilattice lemmas for `IsBotOneClass` |
These lemmas are analogous to the existing lemmas for `LinearOrder` + `IsBotOneClass`. The bot versions for Semilattices and LinearOrder also exist already.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
29/4 |
Mathlib/Algebra/Order/IsBotOne.lean |
1 |
1 |
['github-actions'] |
nobody |
0-7108 1 hour ago |
0-10529 2 hours ago |
0-13589 3 hours |
| 42545 |
j-loreaux author:j-loreaux |
refactor(Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Order): clean up hypotheses |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
69/54 |
Mathlib/Analysis/CStarAlgebra/ApproximateUnit.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Order.lean,Mathlib/Analysis/CStarAlgebra/GelfandNaimarkSegal.lean,Mathlib/Analysis/CStarAlgebra/Module/Constructions.lean,Mathlib/Analysis/CStarAlgebra/Module/Defs.lean,Mathlib/Analysis/CStarAlgebra/PositiveLinearMap.lean,Mathlib/Analysis/CStarAlgebra/Unitary/Connected.lean |
7 |
6 |
['github-actions', 'themathqueen'] |
nobody |
0-4802 1 hour ago |
0-6722 1 hour ago |
0-6710 1 hour |
| 42444 |
j-loreaux author:j-loreaux |
feat: prove that in the C⋆-algebra the map `a ↦ ‖a⁺‖` is monotone |
Along the way, we provide some generic lemmas related to the continuous functional calculus and reduce the public imports of `Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Order.lean`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
108/3 |
Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Isometric.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/NonUnital.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Order.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Unital.lean |
4 |
10 |
['github-actions', 'themathqueen'] |
nobody |
0-4476 1 hour ago |
0-5641 1 hour ago |
0-18312 5 hours |
| 42526 |
joelriou author:joelriou |
feat(CategoryTheory): more API for `IsoCat` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
maintainer-merge
|
54/3 |
Mathlib/CategoryTheory/IsoCat.lean |
1 |
9 |
['github-actions', 'joelriou', 'robin-carlier'] |
nobody |
0-2792 46 minutes ago |
0-12365 3 hours ago |
0-26160 7 hours |
| 42529 |
joelriou author:joelriou |
chore(CategoryTheory): composition implicit reducible in `Type` |
This is meant to be used in combination with #42528 in order to have better "defeq" for categories of functors to types.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
easy
maintainer-merge
|
2/2 |
Mathlib/CategoryTheory/Types/Basic.lean |
1 |
5 |
['github-actions', 'joelriou', 'leanprover-radar', 'robin-carlier'] |
nobody |
0-2773 46 minutes ago |
0-9736 2 hours ago |
0-21541 5 hours |
| 41127 |
TJHeeringa author:TJHeeringa |
feat(Analysis/InnerProductSpace/Reproducing): add sum of two RKHS |
Add the sum of two RKHS. This space comes equipped with the norm
$$
\\|f\\|^2 = \inf \\{ \\|f_1\\| + \\|f_1\\| : f_1\in H_1, f_2\in H_2 \text{ s.t. } f(x) = f_1(x) + f_2(x) \quad \forall x\in X \\}
$$
This quotient norm is realized by defining the space as the quotient of `WithLp 2 (H × H₁)` with the kernel of the map `WithLp 2 (H × H₁) →L[𝕜] (X → V), (f,g) ↦ ↑f + ↑f` and defining the `coeCLM` of the RKHS accordingly.
---
I am doubting whether `generator` and `sumSpace` are good names.
This sum of two RKHs `sumSpace` is not a direct sum or a Hilbert sum, but the sum from interpolation theory. Once that is properly implemented the construction of `sumSpace` should likely be altered accordingly.
#### AI usage:
I used AI for a previous attempt in which I defined `sumSpace` as
```lean4
abbrev sumSpace := (generator H H₁).range
```
instead of
```lean4
abbrev sumSpace := WithLp 2 (H × H₁) ⧸ (generator H H₁).ker
```
However, that lead to instance collisions.
Additionally, I used an LLM to help with the proof of `linearIsometry_surjective`.
#### Mathematical details
These can be found in e.g. theorem 5.4 of Paulsen, Vern I. and Raghupathi, Mrinal,
*An introduction to the theory of reproducing kernel Hilbert spaces*.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41149
[](https://gitpod.io/from-referrer/)
|
t-analysis |
209/2 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/Reproducing.lean,Mathlib/Analysis/InnerProductSpace/Reproducing/Operations.lean |
3 |
12 |
['Maldooor', 'TJHeeringa', 'github-actions', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
0-1866 31 minutes ago |
8-82316 8 days ago |
18-30753 18 days |
| 39116 |
khwilson author:khwilson |
feat(Topology/Semicontinuity/Michael): michael's selection theorem |
Michael's selection theorem states that a correspondence `f : α → Set β` from a normal, paracompact topological space `α` to a Frechet space `β` that is lower hemicontinuous, and has nonempty, closed, convex values admits a continuous selection, i.e., a map `g : α → β` such that `g x ∈ f x` for all `x`.
This theorem is used in many places, e.g., to find continuous sections to certain functions.
This PR proves this theorem.
N.B. At this time, this PR doesn't pass as it depends on two other PRs which may go through substantial changes
- [x] depends on: #38601
- [x] depends on: #39063
AI Disclosure: Various simplifications and refactors provided by Claude Code and then edited by me.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
282/16 |
Mathlib.lean,Mathlib/Topology/Algebra/Group/Pointwise.lean,Mathlib/Topology/Semicontinuity/Michael.lean |
3 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
j-loreaux assignee:j-loreaux |
0-1806 30 minutes ago |
30-83334 30 days ago |
33-62129 33 days |
| 42546 |
plp127 author:plp127 |
chore: rename `Set.exists_mem_of_nonempty` |
Rename `Set.exists_mem_of_nonempty` to `Set.exists_mem_univ_of_nonempty`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
8/6 |
Mathlib/Data/Set/Basic.lean,Mathlib/LinearAlgebra/Multilinear/Basic.lean,Mathlib/Topology/MetricSpace/GromovHausdorff.lean |
3 |
1 |
['github-actions'] |
nobody |
0-1090 18 minutes ago |
0-1507 24 minutes ago |
0-1495 24 minutes |
| 42491 |
grunweg author:grunweg |
chore(Geometry/Manifold/Notation): avoid more superfluous work in cus… |
…tom elaborators
We can use mkAppOptM instead of passing from an expression to syntax and re-elaborating that. Continuation of #40933.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
easy
t-meta
maintainer-merge
|
6/11 |
Mathlib/Geometry/Manifold/Notation.lean |
1 |
5 |
['github-actions', 'thorimur'] |
nobody |
0-690 11 minutes ago |
1-33479 1 day ago |
1-33467 1 day |
| 42540 |
shaikidris author:shaikidris |
feat: add natural density of sets of naturals |
This PR defines the natural density of a set of natural numbers through convergence of its finite-prefix proportions.
It introduces `Set.HasNaturalDensity` and `Set.naturalDensity`, proves uniqueness, computes the densities of the empty and universal sets, and establishes that every natural density lies in `[0, 1]`.
This addresses part of the TODO in `Mathlib.Combinatorics.Schnirelmann`. Lower and upper asymptotic densities and their relationship with Schnirelmann density are left to focused follow-up PRs.
---
---
<!-- Your PR title will become the first line of the commit message.
AI disclosure: this PR is primarily LLM-generated (OpenAI Codex)
I primarily used these as part of my other project on quantitative descent already and I think there is a merit in reusability.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
|
185/2 |
Mathlib.lean,Mathlib/Combinatorics/AsymptoticDensity.lean,Mathlib/Combinatorics/Schnirelmann.lean |
3 |
8 |
['github-actions', 'shaikidris', 'wwylele'] |
nobody |
0-636 10 minutes ago |
0-13984 3 hours ago |
0-13972 3 hours |
| 42250 |
grunweg author:grunweg |
feat: support inferring a model with corners on a manifold over Euclidean (half-)space or quadrant |
Follow-up to https://github.com/leanprover-community/mathlib4/pull/40075. (Re-)discovered during `scholzhannah`'s master's thesis.
---
Best reviewed commit by commit.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
t-meta
maintainer-merge
|
65/6 |
Mathlib/Geometry/Manifold/Notation.lean,MathlibTest/DifferentialGeometry/Notation/Advanced.lean,MathlibTest/DifferentialGeometry/Notation/Basic.lean |
3 |
6 |
['github-actions', 'grunweg', 'joneugster', 'thorimur'] |
joneugster assignee:joneugster |
0-508 8 minutes ago |
9-15095 9 days ago |
9-15083 9 days |