Welcome to the mathlib review page. Everybody's help with reviewing is appreciated. Reviewing contributions is important, and everybody is welcome to review pull requests! If you're not sure how, the pull request review guide is there to help you.
This page is the main reviewer-facing queue: if a PR is ready for review, it belongs here. The triage page contains additional triage-oriented views, but it is not the primary review queue.
This page contains tables of
| Number |
Author |
Title |
Description |
Labels |
+/- |
Modified files (first 100) |
📝 |
💬 |
All users who commented or reviewed |
Assignee(s) |
Updated |
Last status change |
total time in review |
| 39279 |
jayscambler author:jayscambler |
feat(Cryptography/Sigma): Schnorr sigma protocol and signature scheme |
Adds `Mathlib/Cryptography/Sigma/Schnorr.lean`. New file in a new top-level directory; mathlib currently has no `Mathlib/Cryptography/`, so I've taken `Mathlib/Cryptography/Sigma/` as the natural home for sigma-protocol formalizations.
The file proves the three defining properties of Schnorr's identification scheme as a sigma protocol:
- `Schnorr.correct`: completeness. Honest verifier accepts honest signer's transcript.
- `Schnorr.specialSoundness`: from two accepting transcripts sharing the commitment but using different challenges `c, c'`, the witness `x = (s - s') / (c - c')` is recovered. Needs `q` prime so `c - c'` is invertible in `ZMod q`.
- `Schnorr.hvzkAccepts`: the HVZK simulator `g^s · (y^c)⁻¹` always yields accepting transcripts. This is the structural-correctness half of HVZK only; the distributional indistinguishability statement is a separate result and not in this PR.
On top of the sigma protocol there's `Schnorr.Signature.{keyGen, sign, verify, correct}` wrapping it as a Fiat-Shamir signature scheme; `Schnorr.Signature.correct` is a one-line corollary of `Schnorr.correct`.
Two auxiliary lemmas, `Schnorr.gpow_sub` and `Schnorr.gpow_mul`, bridge `ZMod q` arithmetic and group exponentiation under `Fintype.card G = q`. They're local to this file for now because the surrounding `gpow` API is itself cryptography-specific; if a general `ZMod q`-graded group action framework lands in mathlib later, both lemmas would become instances of it.
There's also a small `example` instantiating everything on `Multiplicative (ZMod q)` for `Fact q.Prime` to show the API typechecks. That instantiation is a toy (DLOG is trivial in that group), but it confirms the abstraction is usable.
**AI disclosure**: this PR was a collaboration between myself, Grey Haven's autocontext and Claude Opus 4.7 (Anthropic). I read each line and built locally on current master. (strawberry has three r's) |
new-contributor
LLM-generated
|
352/0 |
Mathlib.lean,Mathlib/Cryptography/Sigma/Schnorr.lean |
2 |
2 |
['github-actions'] |
nobody |
74-11965 2 months ago |
74-12044 74 days ago |
74-12414 74 days |
| 33928 |
jsm28 author:jsm28 |
feat(Combinatorics/Tiling/TileSet): indexed families of tiles |
Define the type `TileSet` for indexed families of tiles (in a discrete context), and some associated definitions (including `symmetryGroup`) and API lemmas.
`TileSet` can be used for tilings of the whole space; for tilings of part of the space; for patches of tiles (extracted from a tiling by considering tiles meeting some set of points, or considered on their own without extracting from a tiling); for multiple tilings (covering the space more than once). In particular, the fact that people study multiple tilings provides a clear justification for using indexed families rather than sets of tiles, and basic definitions and API lemmas generally work for all these different uses of `TileSet` (sometimes with weak constraints such as tiles being finite, nonempty and only having finitely many tiles meeting any point of the space).
Definitions for saying e.g. "this `TileSet` is a tiling of the whole space" are to be included in subsequent files in subsequent PRs.
From AperiodicMonotilesLean.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
460/0 |
Mathlib.lean,Mathlib/Combinatorics/Tiling/TileSet.lean |
2 |
23 |
['Parcly-Taxel', 'b-mehta', 'eric-wieser', 'github-actions', 'jsm28', 'vihdzp'] |
nobody |
68-66246 2 months ago |
193-83354 193 days ago |
193-83234 193 days |
| 35069 |
A-M-Berns author:A-M-Berns |
feat(Geometry/Polygon): simple polygons and boundary map |
This PR introduces Simple polygons with the predicate `IsSimple`, which captures the idea of a non-self-intersecting boundary, in the file Simple.lean. In the file Boundary.lean, a boundary map from `AddCircle n` is defined. I prove that the range of this map is the boundary and that this map is injective if and only if the polygon is simple. I kept Boundary.lean and Simple.lean separate because future results will include stuff just about the boundary map independent of simplicity (e.g. that it is continuous in the appropriate setting) and stuff just about simple polygons independent of the boundary map (e.g. that for n = 3, IsSimple iff HasNondegenerateVertices.) I used Claude Code to help generate some of the proof material, but I golfed and edited all AI contribution.
- [x] depends on: #34598
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
--> |
new-contributor
t-euclidean-geometry
LLM-generated
|
360/0 |
Mathlib.lean,Mathlib/Geometry/Polygon/Boundary.lean,Mathlib/Geometry/Polygon/Simple.lean,Mathlib/Logic/Equiv/Fin/Rotate.lean |
4 |
30 |
['A-M-Berns', 'eric-wieser', 'github-actions', 'joneugster', 'jsm28', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp', 'wwylele'] |
nobody |
64-66247 2 months ago |
151-5702 151 days ago |
153-39868 153 days |
| 36814 |
YaelDillies author:YaelDillies |
refactor(Combinatorics/SimpleGraph): no proof obligation in `rotate` |
If the walk doesn't go through the new vertex, return `nil` instead.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
41/32 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Matching.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean |
7 |
9 |
['SnirBroshi', 'YaelDillies', 'b-mehta', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
61-15345 2 months ago |
61-15422 61 days ago |
123-53417 123 days |
| 39907 |
Hagb author:Hagb |
feat(Order/InititalSeg): `PrincipalSeg` is trichotomous for well orders |
For any two well orders, one is a principal segment of the other, or they are isomorphic.
Suggested by @vihdzp in the review of #39545
https://github.com/leanprover-community/mathlib4/pull/39545#discussion_r3262466782. It may slightly simplify the proof of `infinite_iff_nonempty_relEmbedding_of_isWellOrder`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
7/0 |
Mathlib/Order/InitialSeg.lean |
1 |
1 |
['github-actions', 'vihdzp'] |
nobody |
60-10899 1 month ago |
60-53209 60 days ago |
60-53089 60 days |
| 39905 |
plp127 author:plp127 |
chore(Order/CompleteBooleanAlgebra): dualize `symmDiff` theorems |
Dualize some `symmDiff` theorems, and also generalize them from `CompleteBooleanAlgebra` to `Order.Coframe`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
76/39 |
Mathlib/Order/CompleteBooleanAlgebra.lean |
1 |
3 |
['github-actions', 'plp127', 'vihdzp'] |
nobody |
54-77927 1 month ago |
60-65210 60 days ago |
60-65090 60 days |
| 40185 |
lua-vr author:lua-vr |
feat(Order/Closure): closure_sup_le and sup_closure_le |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
6/0 |
Mathlib/Order/Closure.lean |
1 |
2 |
['github-actions'] |
nobody |
53-17708 1 month ago |
53-18073 53 days ago |
53-17953 53 days |
| 35753 |
Vilin97 author:Vilin97 |
feat(Topology/Algebra/Order): regular grid helpers and piecewise linear interpolation |
Make API for piecewise linear interpolation on regular grids. I need these to for ODE time-stepping methods, like forward Euler, and later Runge–Kutta methods.
Follow-up PR: #35755 (forward Euler method convergence).
I don't know if these numerical analysis ODE-solving methods even belong in mathlib. If someone could advise me on it, I would appreciate it.
---
The initial proof was produced by [Aristotle](https://aristotle.harmonic.fun). The code was iteratively refined (factoring out lemmas, golfing, simplifying proofs) using Claude Code.
- [ ] depends on: #38091 |
t-topology
new-contributor
LLM-generated
maintainer-merge
|
201/0 |
Mathlib.lean,Mathlib/Topology/Algebra/Order/PiecewiseLinear.lean |
2 |
59 |
['Vilin97', 'YanYablonovskiy', 'adomani', 'botbaki-review', 'copilot-pull-request-reviewer', 'dagurtomas', 'eric-wieser', 'github-actions', 'grunweg', 'j-loreaux', 'mathlib-dependent-issues', 'wwylele'] |
nobody |
52-66247 1 month ago |
85-76967 85 days ago |
118-39527 118 days |
| 39449 |
Paul-Lez author:Paul-Lez |
doc: add library note about scoping simp lemmas with weak keys |
In PR #39262 I noticed that some `simp` lemmas were scoped for a reason that is not immediately obvious, so I figured that adding a library note would be nice in case anyone else runs into this in the future (this pattern is quite common in Mathlib!)
In case it's helpful for review, here are links to a few of the PRs that added this scoping initially:
- #14233
- #15620
- #15631
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
71/4 |
Mathlib.lean,Mathlib/Algebra/AddConstMap/Basic.lean,Mathlib/Algebra/CharP/Two.lean,Mathlib/Algebra/GradedMonoid.lean,Mathlib/Algebra/Ring/BooleanRing.lean,Mathlib/Algebra/Ring/CharZero.lean,Mathlib/Tactic.lean,Mathlib/Tactic/SimpLibraryNote.lean |
8 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
51-64406 1 month ago |
51-64406 51 days ago |
64-72038 64 days |
| 40329 |
no-j author:no-j |
feat(Computability): matching εNFA.Path definition with NFA.Path |
Added εNFA.Path definition that is based on `Type` instead of `Prop` to match NFA's path definition
Added εNFA.Path.supp (same definition as NFA.Path.supp)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-computability
new-contributor
|
60/23 |
Mathlib/Computability/EpsilonNFA.lean |
1 |
3 |
['github-actions'] |
nobody |
49-32232 1 month ago |
49-33065 49 days ago |
49-33317 49 days |
| 40336 |
Bergschaf author:Bergschaf |
feat(Order/Sublocales): definition of open sublocales |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
49/7 |
Mathlib/Order/Sublocale.lean |
1 |
3 |
['Bergschaf', 'github-actions'] |
nobody |
48-7598 1 month ago |
48-20685 48 days ago |
48-21020 48 days |
| 40274 |
gasparattila author:gasparattila |
chore(Order/Partition/Finpartition): deprecate `ofPairwiseDisjoint` |
This is a duplicate of `Finpartition.ofErase`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
8/16 |
Mathlib/MeasureTheory/VectorMeasure/Variation/Basic.lean,Mathlib/Order/Partition/Finpartition.lean |
2 |
2 |
['gasparattila', 'github-actions'] |
nobody |
47-42636 1 month ago |
50-80880 50 days ago |
50-80760 50 days |
| 40404 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Constructions/BorelSpace): remove some `erw`'s |
Extracted from #40348
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-order
t-measure-probability
|
27/6 |
Mathlib/MeasureTheory/Constructions/BorelSpace/Order.lean,Mathlib/Order/Interval/Set/Basic.lean,Mathlib/Order/OrderDual.lean |
3 |
1 |
['github-actions'] |
nobody |
47-27800 1 month ago |
47-31098 47 days ago |
47-30978 47 days |
| 40416 |
sparckix author:sparckix |
feat(Order/Monotone): add diagonal subsequence extraction |
This PR adds a small diagonal extraction lemma for nested strictly monotone subsequences of `Nat`.
Given strict-mono maps `φ k : Nat -> Nat` such that each `φ (k + 1)` factors through `φ k` by a strict-mono map `τ k`, the diagonal sequence `fun n => φ n n` is strictly monotone and each tail of the diagonal factors through the corresponding `φ k` by a strict-mono map.
The lemma is intended as a reusable sequence/order fact and is placed near `Nat.exists_strictMono_subsequence`.
Local checks run:
```text
lake env lean Mathlib/Order/Monotone/Basic.lean
lake build Mathlib.Order.Monotone.Basic
lake exe lint-style Mathlib/Order/Monotone/Basic.lean
git diff --check
```
AI assistance disclosure: I used AI tools, including Codex and external model feedback, to help extract and review this small lemma from a local formalization project. I have checked the statement and proof myself and am responsible for the submitted code.
|
t-order
new-contributor
LLM-generated
|
66/0 |
Mathlib/Order/Monotone/Basic.lean |
1 |
2 |
['github-actions'] |
nobody |
46-79398 1 month ago |
47-11780 47 days ago |
47-11660 47 days |
| 40438 |
tb65536 author:tb65536 |
feat(RingTheory/Spectrum/Prime/Basic): pointwise action on prime spectrum |
This PR defines the pointwise action on the prime spectrum.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
15/0 |
Mathlib/RingTheory/Spectrum/Prime/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
46-72367 1 month ago |
46-72415 46 days ago |
46-72295 46 days |
| 40472 |
karlesmarin author:karlesmarin |
feat(Combinatorics/SimpleGraph): oriented incidence matrix and the La… |
# feat(Combinatorics/SimpleGraph): oriented incidence matrix and the Laplacian factorization
## Summary
Adds the **oriented incidence matrix** of a simple graph and the standard **Gram factorization
of the graph Laplacian**:
- **`SimpleGraph.orientedIncMatrix R : Matrix α (Sym2 α) R`** — in the column of an edge
`e = s(u, w)` with `u < w`: `+1` at row `w` (the larger endpoint), `-1` at row `u`, `0`
elsewhere; columns of non-edges are zero. Orientation induced by a `LinearOrder` on the
vertex type.
- **`SimpleGraph.orientedIncMatrix_mul_transpose`** — `N * Nᵀ = G.lapMatrix R` (= `D − A`).
- Supporting API mirroring `incMatrix`: `orientedIncMatrix_apply`,
`orientedIncMatrix_of_notMem_incidenceSet`, `orientedIncMatrix_mul_self`
(the square of an entry is the unoriented `incMatrix` entry), and the two sign lemmas
`orientedIncMatrix_apply_mul_apply_of_adj` (product of the two endpoint entries = `-1`),
`orientedIncMatrix_apply_add_apply_of_adj` (their sum = `0`), plus
`orientedIncMatrix_apply_mul_apply_of_ne` (vanishing away from the common edge).
## Why
Mathlib has the unoriented `G.incMatrix`, whose Gram matrix is the **signless** Laplacian
`D + A` (`incMatrix_mul_transpose_diag` ff.), and it has `G.lapMatrix = D − A` with its kernel
theory — but no object connecting the two. The oriented incidence matrix is that object, and
`N Nᵀ = D − A` is the factorization behind: positive semidefiniteness of the Laplacian as a
Gram fact, Kirchhoff/matrix-tree determinant arguments (via Cauchy–Binet on the reduced
factorization), and total unimodularity of incidence matrices.
## Design notes
- The fixed smaller→larger orientation is harmless: any orientation gives the same Gram matrix
(each edge contributes `(±1)²` on the diagonal and `(+1)(−1)` off it). This is stated in the
module docstring; no orientation-genericity machinery is introduced.
- The headline proof is entrywise: the diagonal reduces to `sum_incMatrix_apply` (= degree)
through `orientedIncMatrix_mul_self`; an off-diagonal `(u, w)` entry is supported on the
single column `s(u, w)`, handled by `Finset.sum_eq_single` and the sign lemmas.
- `[Ring R]` for the API section (signs need negation); the definition itself only needs
`[Zero R] [One R] [Neg R]`.
## Files / placement
- `Mathlib/Combinatorics/SimpleGraph/OrientedIncMatrix.lean` (new)
- `Mathlib.lean` (+1 import line)
## Verification
- `lake env lean` on the file: clean, zero warnings.
- `#print axioms SimpleGraph.orientedIncMatrix_mul_transpose` → 3 standard axioms.
- The factorization and the downstream matrix-tree chain were validated numerically in exact
arithmetic (SageMath) before formalization.
Downstream context: DOI [10.5281/zenodo.20629746](https://doi.org/10.5281/zenodo.20629746).
|
new-contributor
LLM-generated
|
157/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/OrientedIncMatrix.lean |
2 |
1 |
['github-actions'] |
nobody |
46-5187 1 month ago |
46-10264 46 days ago |
46-10237 46 days |
| 40502 |
metakunt author:metakunt |
feat(RingTheory/RootsOfUnits/PrimitiveRoots): pow_div_gcd |
From #39404 |
t-ring-theory |
13/11 |
Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean |
1 |
2 |
['github-actions', 'tb65536'] |
nobody |
45-12865 1 month ago |
45-13747 45 days ago |
45-14200 45 days |
| 40520 |
Julian-Kuelshammer author:Julian-Kuelshammer |
feat(CategoryTheory/Linear): linear Yoneda and coYoneda are linear |
Mathlib/CategoryTheory/Linear/Basic.lean:
Adds an instance that the opposite category of a linear category is linear.
Mathlib/CategoryTheory/Linear/Yoneda.lean:
Adds instances that the linearYoneda and linearcoYoneda are linear functors, which was a TODO before.
---
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
|
27/2 |
Mathlib/CategoryTheory/Linear/Basic.lean,Mathlib/CategoryTheory/Linear/Yoneda.lean |
2 |
3 |
['github-actions'] |
nobody |
44-75560 1 month ago |
44-76996 44 days ago |
44-77409 44 days |
| 38225 |
kim-em author:kim-em |
ci: block merging PRs with large import increases unless reviewed |
This PR makes the existing `large-import` label into a merge gate. PRs that significantly increase transitive imports (>2% for any modified file) are now blocked from merging until a reviewer adds the `allow-large-import` label.
### Why three labels?
Bors's `block_labels` has no conditional logic — if a label is in the list, merge is blocked unconditionally. We need "blocked unless a reviewer has approved", i.e. `large-import ∧ ¬allow-large-import`. Since bors can't express that, we use a derived label:
| Label | Managed by | Purpose |
|---|---|---|
| `large-import` | `build` job (import analysis) | Factual: this PR increases imports |
| `blocked-by-large-import` | `check-large-import` job | Operational: blocks bors |
| `allow-large-import` | Reviewer | Override: reviewer approves the increase |
Each label is managed by exactly one actor, so there is no label-fighting.
### How it works
1. The existing `build` job adds/removes `large-import` based on import analysis (unchanged).
2. A new `check-large-import` job (in the same workflow) waits for `build` to finish, then:
- If `large-import` is present and `allow-large-import` is absent → adds `blocked-by-large-import`
- Otherwise → removes `blocked-by-large-import`
3. `blocked-by-large-import` is added to `block_labels` in `bors.toml`.
When a reviewer adds `allow-large-import`, the `labeled` event re-triggers the workflow. The heavy `build` job is skipped (guarded by `github.event.action != 'labeled'`), but the lightweight `check-large-import` job runs, sees both labels, and removes `blocked-by-large-import`. Bors can now merge.
### Reviewer workflow
The CI failure message tells the reviewer to consider whether the PR could be improved by splitting files, rearranging material, or creating new intermediate files. If the import increase is reasonable, they add `allow-large-import`.
False positives can be reported on the [mathlib4 Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/large-import.20label).
🤖 Prepared with Claude Code |
CI |
78/2 |
.github/workflows/PR_summary.yml,bors.toml |
2 |
7 |
['SnirBroshi', 'github-actions', 'jcommelin', 'joneugster', 'kim-em'] |
nobody |
44-66247 1 month ago |
96-70997 96 days ago |
96-71495 96 days |
| 40495 |
gw90 author:gw90 |
feat: weighted graphs with killing term |
Adding basic definitions and API for weighted graphs and weighted graphs with killing term.
---
My goal is to develop the basic theory from the beginning of [this textbook](https://www.math.uni-potsdam.de/fileadmin/user_upload/Prof-GraphTh/Keller/KellerLenzWojciechowski_GraphsAndDiscreteDirichletSpaces_wu_version.pdf). I also have some definitions and lemmas regarding Dirichlet forms and Laplacians to PR later, but I tried to pare down this first PR as much as possible. It currently has only 4 main definitions and sufficient API to demonstrate their correctness.
Note that I did not use [SimpleGraph.edgeLabeling](https://leanprover-community.github.io/mathlib4_docs/find/?pattern=SimpleGraph.EdgeLabeling#doc) for the edgeWeight function because it is important that vertices that are not adjacent have an edge weight of zero. That is, the edgeWeight must be defined for all pairs of vertices and respect the underlying adjacency relation on the graph.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
368/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Weighted/Basic.lean,docs/references.bib |
3 |
2 |
['github-actions'] |
nobody |
42-79175 1 month ago |
44-64810 44 days ago |
44-64690 44 days |
| 40612 |
kim-em author:kim-em |
feat: add Jacobian challenge based test for new `def_wanted` feature |
This PR adds tests for the new features introduced in batteries#1818, i.e. `def_wanted`, and the ability to safely refer to other `*_wanted` statements from within a `*_wanted` statement. We use the Jacobian challenge as the example. |
|
86/0 |
MathlibTest/JacobianChallenge.lean |
1 |
1 |
['github-actions'] |
nobody |
41-53104 1 month ago |
41-56565 41 days ago |
41-56445 41 days |
| 40532 |
tb65536 author:tb65536 |
feat(Combinatorics/Hypergraph/Basic): define linear hypergraphs |
This PR defines linear hypergraphs (hypergraphs where any two edges share at most one vertex).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/0 |
Mathlib/Combinatorics/Hypergraph/Basic.lean |
1 |
6 |
['SnirBroshi', 'github-actions', 'tb65536'] |
nobody |
41-36389 1 month ago |
44-10813 44 days ago |
44-53659 44 days |
| 40531 |
tb65536 author:tb65536 |
feat(Combinatorics/Hypergraph/Coloring): define hypergraph colorings |
This PR defines hypergraph colorings and the chromatic index of a hypergraph.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
66/0 |
Mathlib.lean,Mathlib/Combinatorics/Hypergraph/Coloring/Edge.lean |
2 |
4 |
['SnirBroshi', 'b-mehta', 'github-actions', 'tb65536'] |
nobody |
41-28728 1 month ago |
41-29601 41 days ago |
41-77614 41 days |
| 40639 |
metakunt author:metakunt |
feat(Combinatorics/MixedGraph): adds mixed graphs and some example API |
This PR is intended to gather some feedback. I'd like to introduce mixed graphs into mathlib as a generalisation of the graph api.
I didn't know whether to change the API of the graphs so I experimented a bit and ported some results as a proof of concept.
Zulip discussion: https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Mixed.20multigraphs/with/602794133
|
t-combinatorics |
186/0 |
Mathlib.lean,Mathlib/Combinatorics/Mixedgraph/Basic.lean |
2 |
2 |
['github-actions'] |
nobody |
41-11668 1 month ago |
41-12531 41 days ago |
41-12894 41 days |
| 38606 |
dennj author:dennj |
feat: preparation for Vanishing Sum of Roots of Unity |
Adds the Mathlib API extensions needed for an upcoming formalization of the Lam-style classification theorem for vanishing sums of roots of unity.
* Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean
+ `exists_eq_const_of_sum_smul_eq_zero_of_sum_eq_zero_of_linearIndependent`: if `∑ vᵢ = 0` and the first `n-1` of `n` vectors are linearly independent, every linear relation has constant coefficients.
* Mathlib/RingTheory/Radical/NatInt.lean
+ `Nat.totient_eq_div_radical_mul_totient_radical`: Euler's totient splits as `φ(n) = (n / rad n) * φ(rad n)`.
* Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean
+ `IsPrimitiveRoot.sum_range_pow_mul_div_eq_zero_of_dvd`: the `d` evenly-spaced powers of a primitive `k`-th root sum to zero, for `d ∣ k` and `1 < d`.
* Mathlib/NumberTheory/Cyclotomic/LinearDisjoint.lean (new)
+ `IsPrimitiveRoot.linearDisjoint_adjoin_pow_of_coprime`: cyclotomic subfields of coprime orders are linearly disjoint over `ℚ`.
* Mathlib/NumberTheory/Cyclotomic/LinearRelations.lean (new)
+ `IsPrimitiveRoot.coeffs_eq_of_sum_pow_eq_zero_prime_coprime`: in the cyclotomic field of order `p * m` with `p` prime coprime to `m`, any `ℚ⟮ζ^p⟯`-linear relation among powers of `ζ^m` has all coefficients equal.
---
I need these as preparation to start formalizing the theorem:
Let k be a positive integer. If a finite family of complex k-th roots of unity sums to zero, then the size of the family is a non-negative integer combination of the prime divisors of k.
---
Human-made PR with AI used for golfing and documentation |
new-contributor |
219/0 |
Mathlib.lean,Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean,Mathlib/NumberTheory/Cyclotomic/LinearDisjoint.lean,Mathlib/NumberTheory/Cyclotomic/LinearRelations.lean,Mathlib/RingTheory/Radical/Totient.lean,Mathlib/RingTheory/RootsOfUnity/PrimitiveRoots.lean |
6 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
38-65602 1 month ago |
38-67652 38 days ago |
47-12780 47 days |
| 37183 |
dagurtomas author:dagurtomas |
feat(Tactic/CategoryTheory): map attribute |
Adding `@[map]` to a lemma named `H` of shape `∀ .., f = g`, where `f` and `g` are morphisms
in some category `C`, creates a new lemma named `H_map` of the form
`∀ .. {D} (func : C ⥤ D), F.map f = F.map g` and then applies
`simp only [Functor.map_comp, Functor.map_id]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
LLM-generated
t-meta
t-category-theory
|
301/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/CategoryTheory/Map.lean,MathlibTest/CategoryTheory/Map.lean,MathlibTest/CategoryTheory/MapSimp.lean |
5 |
13 |
['adamtopaz', 'dagurtomas', 'github-actions', 'joelriou'] |
nobody |
37-66240 1 month ago |
59-47876 59 days ago |
122-11735 122 days |
| 40791 |
vvvv-ops author:vvvv-ops |
feat(RingTheory/DedekindDomain): dirichlet's s-unit theorem |
Proves the `Future work` of `RingTheory/DedekindDomain/SInteger.lean`: finite generation of `S`-units and Dirichlet's `S`-unit theorem.
For a Dedekind domain `R` with fraction field `K` and a finite set `S` of height-one primes, this adds the `S`-valuation map `Set.unitValuation` with kernel the `∅`-units (`Set.unitValuation_ker`), finite generation `Set.unit_fg`, and the exact rank `Set.finrank_eq`: `finrank ℤ (Additive 𝒪_{K,S}ˣ) = finrank ℤ (Additive 𝒪_Kˣ) + |S|`, plus the number-field specialisation `Set.unit_finrank_numberField` (`= (r₁ + r₂ - 1) + |S|`). The proof uses the short exact sequence `1 → 𝒪_Kˣ → 𝒪_{K,S}ˣ → ⊕_{v∈S} ℤ`: the kernel is the units, and the image has finite index because its cokernel embeds in the (finite) class group.
The general finiteness helpers `Module.Finite.of_fg_ker_of_fg_range`, `CommGroup.fg_of_fg_ker_of_fg_range`, `Subgroup.fg_of_fg_commGroup` are included in the file for now — happy to move them to `RingTheory/Finiteness` / `GroupTheory/Finiteness` if preferred.
|
t-ring-theory
new-contributor
|
339/0 |
Mathlib.lean,Mathlib/RingTheory/DedekindDomain/SUnit.lean,scripts/noshake.json |
3 |
3 |
['github-actions'] |
nobody |
37-51368 1 month ago |
37-54256 37 days ago |
37-54136 37 days |
| 40579 |
jcreinhold author:jcreinhold |
feat(Algebra/Category/Ring): preserve limits to CommMonCat |
Adds the missing instance saying that forgetting a commutative ring to its multiplicative commutative monoid preserves limits. |
t-algebra
new-contributor
label:t-algebra$ |
7/0 |
Mathlib/Algebra/Category/Ring/Limits.lean |
1 |
7 |
['felixpernegger', 'github-actions', 'jcreinhold'] |
nobody |
37-48987 1 month ago |
42-34059 42 days ago |
42-42413 42 days |
| 40775 |
felixpernegger author:felixpernegger |
feat(Data/Finset): `insert a (s.erase a) = insert a s` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
5/3 |
Mathlib/Data/Finset/Basic.lean,Mathlib/Data/Finset/Fold.lean,Mathlib/RingTheory/Lasker.lean |
3 |
3 |
['eric-wieser', 'felixpernegger', 'github-actions'] |
nobody |
37-27251 1 month ago |
38-2868 38 days ago |
38-4926 38 days |
| 40759 |
CoolRmal author:CoolRmal |
feat(Order): a sequence converges if every subsequence has a further convergent subsequence |
This PR proves `tendsto_of_forall_filter_le_exists_tendsto`, which is the filter version of the theorem in the title: if for any filter `m ≤ l₁`, there exists a nontrivial filter `n ≤ m` such that `f` converges to `l₂` along `n`, then `f` converges to `l₂` along `l₁`.
Mostly generated in a chat with GPT Pro 5.5. Polished and reviewed by me.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
10/0 |
Mathlib/Order/Filter/Tendsto.lean |
1 |
4 |
['CoolRmal', 'attilavjda', 'github-actions'] |
nobody |
36-61082 1 month ago |
36-63240 36 days ago |
38-6550 38 days |
| 39427 |
Hagb author:Hagb |
feat(Order/Interval/Finset/Defs): `LocallyFiniteOrder{Bot,Top}` implies `WellFounded{LT,GT}` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39547
[](https://gitpod.io/from-referrer/)
|
t-order |
11/0 |
Mathlib/Order/Interval/Finset/Defs.lean |
1 |
5 |
['Hagb', 'github-actions', 'leanprover-radar', 'mathlib-dependent-issues'] |
nobody |
34-81357 1 month ago |
34-83080 34 days ago |
35-587 35 days |
| 40876 |
vihdzp author:vihdzp |
chore: deprecate `StrictMono.not_bddAbove_range_of_wellFoundedLT` → `StrictMono.isCofinal_range` |
In a linear order without a maximum, the statements `¬ BddAbove s` and `IsCofinal s` are equivalent. The `IsCofinal` version of this theorem works even without the `NoMaxOrder` assumption, so it is strictly more general.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
18/1 |
Mathlib/Order/Cofinal.lean,Mathlib/Order/WellFounded.lean,Mathlib/SetTheory/Ordinal/Enum.lean |
3 |
5 |
['SnirBroshi', 'github-actions', 'vihdzp'] |
nobody |
34-58722 1 month ago |
34-76747 34 days ago |
34-76825 34 days |
| 40910 |
riccardobrasca author:riccardobrasca |
feat: add comap_map_eq_of_unramified and related declarations |
From flt-regular.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
172/0 |
Mathlib/RingTheory/DedekindDomain/Different.lean |
1 |
1 |
['github-actions'] |
nobody |
33-80155 1 month ago |
33-80989 33 days ago |
33-80869 33 days |
| 36743 |
Jun2M author:Jun2M |
feat(Combinatorics/GraphLike): introduce `GraphLike` typeclass |
Edit: There is #40204: alternative PR that uses incidence to define hypergraph.
Per discussion at ([#graph theory > HasAdj](https://leanprover.zulipchat.com/#narrow/channel/252551-graph-theory/topic/HasAdj/with/575843445)), This PR introduces the `GraphLike` typeclass to capture the notions like `dart` and `walk` across various graph objects, such as `SimpleGraph`, `Graph`, and `Digraph`.
The goal is that by abstracting these core components into a typeclass, we can prove these results once for all graph-like structures rather than duplicating them across different graph types.
### Main definitions
* `GraphLike V D E Gr`: A typeclass parameterized by a vertex type `V`, dart type `D` and a graph type `Gr` (with `V`, `D` & `E` as an `outParam`).
* `GraphLike.verts : Set V`: The set of vertices of the graph.
* `GraphLike.darts : Set D`: The set of darts of the graph.
* `GraphLike.edges : Set E`: The set of edges of the graph.
* `GraphLike.Adj : V → V → Prop`: The adjacency relation, defined by default as `∃ d ∈ darts, fst d = u ∧ snd d = v`.
---
This PR generalises #35776 to also unify `Graph`.
PRs depending on this PR are
#39047 (graphLike with no multi edges) => #39050 (Digraph is graphLike)
||
V
#36829 (undirected graphLike) => #39053 (Graph is graphLike) & #39054 (Simplegraph is graphLike)
||
V
#36756 (def of walk on GraphLike) => #36971 (change Simplegraph to use GraphLike walk)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
104/0 |
Mathlib.lean,Mathlib/Combinatorics/GraphLike/Basic.lean |
2 |
78 |
['IvanRenison', 'Jun2M', 'SnirBroshi', 'YaelDillies', 'github-actions', 'lauramonk', 'mathlib-merge-conflicts'] |
nobody |
33-66247 1 month ago |
79-10650 79 days ago |
130-8946 130 days |
| 40387 |
tb65536 author:tb65536 |
feat(RingTheory/Invariant/Basic): inertia subgroup of a quotient group |
This PR proves that the inertia subgroup of a quotient group is the image of the inertia subgroup.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #40383
- [x] depends on: #40385
- [x] depends on: #40386
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
68/0 |
Mathlib/RingTheory/Invariant/Basic.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues', 'xroblot'] |
nobody |
33-11465 1 month ago |
33-16166 33 days ago |
33-20399 33 days |
| 40963 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Paths): add lemma about the first dart if dropLast is a path |
If `dropLast` of a walk is a path, a dart of the walk sharing its first vertex with the walk also shares its second vertex.
I thought this was a natural more general form of `IsPath.eq_snd_of_mem_edges`, useful for cycles for example.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
16/0 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Operations.lean |
2 |
2 |
['github-actions'] |
nobody |
33-5391 1 month ago |
33-6245 33 days ago |
33-6787 33 days |
| 37232 |
mathlib-splicebot author:mathlib-splicebot |
chore(Algebra/Order): bound on `|n / m|ₘ` and `|n - m|` |
This PR was automatically created from PR #34722 by @GrigorenkoPV via a [review comment](https://github.com/leanprover-community/mathlib4/pull/34722#discussion_r2996870566) by @Vierkantor. |
t-algebra label:t-algebra$ |
5/0 |
Mathlib/Algebra/Order/Group/Unbundled/Abs.lean |
1 |
10 |
['Vierkantor', 'bryangingechen', 'github-actions', 'mathlib-bors'] |
nobody |
32-51725 1 month ago |
32-51725 32 days ago |
32-52193 32 days |
| 40975 |
bwangpj author:bwangpj |
feat(LinearAlgebra): complex structures on real vector spaces |
Define complex structures,i .e. an `ℝ`-linear endomorphism `J` of a real vector space `V` with `J * J = -1`. |
t-algebra label:t-algebra$ |
93/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Complex/Structure.lean |
2 |
4 |
['bwangpj', 'github-actions', 'grunweg', 'wwylele'] |
nobody |
31-74367 1 month ago |
32-76116 32 days ago |
32-75996 32 days |
| 40899 |
mcdoll author:mcdoll |
feat(Data/FunLike): add `abbrev`s for pointwise multiplication |
We add `abbrev`s that provide easy access to instances that involve multiplication as a pointwise operation for `FunLike` classes. This is for example needed for `ZeroAtInftyContinuousMap`
Moreover, we
- move `NatCast` instance for `Pi` to new file `Data/Nat/Cast/Pi`
- rename `IsNatCastApply` to `IsNatCastApplyEqSMul` for the composition variant (same for `IntCast`)
- add `IsNatCast` for pointwise multiplication (same for `IntCast`)
- rename `abbrev` that apply to composition versions to `compSemiring` etc
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
337/68 |
Mathlib.lean,Mathlib/Algebra/Ring/Pi.lean,Mathlib/Data/FunLike/GroupWithZero.lean,Mathlib/Data/FunLike/IsApply.lean,Mathlib/Data/FunLike/Ring.lean,Mathlib/Data/Nat/Cast/Basic.lean,Mathlib/Data/Nat/Cast/Pi.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
8 |
3 |
['eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
31-54240 1 month ago |
31-56577 31 days ago |
33-22135 33 days |
| 40757 |
tb65536 author:tb65536 |
feat(RingTheory/Ideal/Pointwise): add `Ideal.inertia_smul` |
This PR adds `Ideal.inertia_smul` stating that inertia subgroups of conjugate ideals are conjugate.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
15/5 |
Mathlib/RingTheory/Ideal/Defs.lean,Mathlib/RingTheory/Ideal/Pointwise.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
31-37897 1 month ago |
31-39572 31 days ago |
37-83394 37 days |
| 41022 |
CoolRmal author:CoolRmal |
feat(Data/List): add TFAE lemmas for append and permutations |
This PR adds some `TFAE` lemmas in `Mathlib/Data/List/TFAE`: a sublist monotonicity lemma, an append criterion, and congruence under list permutations.
It also rewrites `tfae_cons_of_mem` as a specialization of the append lemma.
Created with the help of codex.
|
t-data |
28/10 |
Mathlib/Data/List/TFAE.lean |
1 |
3 |
['github-actions', 'themathqueen'] |
nobody |
31-4889 1 month ago |
31-37656 31 days ago |
31-37632 31 days |
| 41051 |
tb65536 author:tb65536 |
feat(FieldTheory/PolynomialGaloisGroup): add equivariant bijection between root sets |
Currently the bijection `rootsEquivRoots` between root sets of a polynomial that splits is not equivariant with respect to the action of the Galois group. This PR demotes the existing `rootsEquivRoots` to an auxilliary def `rootsEquivRootsAux` and adds an equivariant `rootsEquivRoots` in its place.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-ring-theory
label:t-algebra$ |
32/18 |
Mathlib/FieldTheory/PolynomialGaloisGroup.lean |
1 |
2 |
['github-actions', 'tb65536'] |
nobody |
30-76832 1 month ago |
30-83112 30 days ago |
30-82994 30 days |
| 41065 |
BryceT233 author:BryceT233 |
feat(Algebra/GroupWithZero/Associated): transfer `IsRelPrime` between associated elements |
This is a split of #41064 which adds lemmas transfering `IsRelPrime` property via associated elements.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
18/0 |
Mathlib/Algebra/GroupWithZero/Associated.lean |
1 |
1 |
['github-actions'] |
nobody |
30-39394 1 month ago |
30-41636 30 days ago |
30-41516 30 days |
| 41074 |
vlad902 author:vlad902 |
feat(RingTheory): a ring is nontrivial iff it has nontrivial Krull dimension |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
15/4 |
Mathlib/Data/ENat/Basic.lean,Mathlib/RingTheory/KrullDimension/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
30-25014 1 month ago |
30-26922 30 days ago |
30-26802 30 days |
| 41073 |
vlad902 author:vlad902 |
feat(RingTheory): characterizing lemma for rings of infinite Krull dimension |
Show that the Krull dimension of a ring R is infinite if and only if it has ideals of unbounded height.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
21/0 |
Mathlib/Data/ENat/Basic.lean,Mathlib/RingTheory/Ideal/Height.lean |
2 |
1 |
['github-actions'] |
nobody |
30-24878 1 month ago |
30-27172 30 days ago |
30-27980 30 days |
| 40967 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Paths): some lemmas about inducing walks |
Could also be done via `SimpleGraph.Walk.map_induce`, but I thought that doing it directly is not much worse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
|
48/0 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean,Mathlib/Data/List/Nodup.lean |
3 |
2 |
['github-actions'] |
nobody |
29-51417 29 days ago |
33-1243 33 days ago |
33-1208 33 days |
| 41066 |
BryceT233 author:BryceT233 |
feat(RingTheory/Jacobson/Ideal): surjective `RingHom` and `IsLocalHom` |
This is a split of #41064 which shows that a surjective `RingHom` is a local homomorphism if and only if its kernel is contained in the jacobson radical of the ring.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
24/16 |
Mathlib/RingTheory/Henselian.lean,Mathlib/RingTheory/Jacobson/Ideal.lean |
2 |
2 |
['BryceT233', 'github-actions'] |
nobody |
29-43320 29 days ago |
29-44261 29 days ago |
30-40434 30 days |
| 38841 |
SnirBroshi author:SnirBroshi |
feat(Mathlib/Order/SuccPred/Limit): more `WithTop` lemmas about `IsMin`/`CovBy`/`IsSuccLimit` |
---
Continues the work from #38244
We should probably also have such lemmas for `WithTopBot`/`WithBotTop`, but that's for another day
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
122/31 |
Mathlib/Order/Cover.lean,Mathlib/Order/SuccPred/Limit.lean,Mathlib/Order/WithBot.lean |
3 |
4 |
['SnirBroshi', 'github-actions', 'vihdzp'] |
nobody |
29-18548 29 days ago |
53-86245 53 days ago |
85-37143 85 days |
| 39747 |
vihdzp author:vihdzp |
feat: intervals `Ici`/`Ioi` are cofinal/closed under directed suprema |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
67/11 |
Mathlib/Order/Cofinal.lean,Mathlib/Order/DirSupClosed.lean,Mathlib/Order/Interval/Set/Basic.lean,Mathlib/Order/UpperLower/Basic.lean,Mathlib/Topology/Order/ScottTopology.lean |
5 |
16 |
['YaelDillies', 'b-mehta', 'github-actions', 'vihdzp'] |
nobody |
29-18305 29 days ago |
63-14846 63 days ago |
63-79096 63 days |
| 39783 |
SnirBroshi author:SnirBroshi |
feat(Order/Interval/Finset): `Set.ncard` lemmas for `LocallyFiniteOrder` |
Followup to #39414 which untagged `Fintype.card_I??` as `@[simp]`.
Adds `Cardinal.mk`/`Set.encard`/`Set.ncard` lemmas for the 8 interval sets `Set.I??` (= 24 lemmas),
that convert them to `Finset.card` over the corresponding `Finset.I??` from a `LocallyFiniteOrder` instance.
---
`simp`? I think it's a bit strange since the `LocallyFiniteOrder` instance could have crazy definitions for the finset intervals which aren't "simpler", though the instances we currently have are simple.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
115/0 |
Mathlib.lean,Mathlib/Order/Interval/Finset/Card.lean |
2 |
1 |
['github-actions'] |
nobody |
29-18235 29 days ago |
63-10744 63 days ago |
63-10923 63 days |
| 40561 |
iosephusferrum author:iosephusferrum |
feat(ModelTheory): quantifier elimination for first-order theories |
This PR introduces `HasQuantifierElimination` for first-order languages, along with some standard criteria to establish it for any language that satisfies them and prerequisite formalization `mathlib4` required on elementary extension pairs (`IsElementaryExtensionPair`) and < κ-generated substructures (`CardinalLTGenerated`). It also states and proves that the first-order theory DLO (dense linear order without endpoints) has quantifier elimination (`dlo_hasQuantifierElimination`), using the newly formalized quantifier elimination criteria.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Salih Erdem Koçak <saliherdemkd@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
---
[](https://gitpod.io/from-referrer/)
Please note that we have utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are directly "translated" from human-language source material (check the diff in `references.bib`) to Lean proofs using mentioned AI tools. However, all design/formalization decisions are made by us. |
new-contributor
LLM-generated
|
976/7 |
Mathlib.lean,Mathlib/ModelTheory/Complexity.lean,Mathlib/ModelTheory/ElementaryExtensionPair.lean,Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/Order.lean,Mathlib/ModelTheory/PartialEquiv.lean,Mathlib/ModelTheory/QuantifierElimination.lean,Mathlib/ModelTheory/Semantics.lean,Mathlib/ModelTheory/Substructures.lean,Mathlib/Tactic/Linter/TextBased/UnicodeLinter.lean,docs/references.bib |
11 |
6 |
['erdkocak', 'felixpernegger', 'github-actions'] |
nobody |
28-75545 28 days ago |
43-78155 43 days ago |
43-78321 43 days |
| 40950 |
bwangpj author:bwangpj |
feat(LinearAlgebra): add Yang-Baxter equation and braided vector spaces |
Define braided vector spaces and the Yang–Baxter equation. |
t-algebra label:t-algebra$ |
121/0 |
Mathlib.lean,Mathlib/LinearAlgebra/TensorProduct/YangBaxter.lean |
2 |
3 |
['github-actions', 'themathqueen'] |
nobody |
28-66288 28 days ago |
33-20136 33 days ago |
33-20016 33 days |
| 41104 |
mbkybky author:mbkybky |
feat(Algebra/Module/Submodule/Pointwise): `u • N = N` if `u` is a unit |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
10/6 |
Mathlib/Algebra/Module/Submodule/Pointwise.lean |
1 |
2 |
['eric-wieser', 'github-actions'] |
nobody |
28-57228 28 days ago |
29-18707 29 days ago |
29-18587 29 days |
| 41134 |
martinwintermath author:martinwintermath |
feat(Algebra/Order/Nonneg): add `Nonneg` for nonnegative subtype |
Currently the nonnegative subtype is denoted `{x : R // 0 ≤ x}` which has a tendency to be used inconsistently and does not print well. This PR introduces
```lean4
/- The subtype of nonnegative elements. -/
abbrev Nonneg (α : Type*) [Zero α] [LE α] := { x : α // 0 ≤ x }
```
and replaces `{x : R // 0 ≤ x}` by `Nonneg R` throughout mathlib.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
114/110 |
Mathlib/Algebra/Order/Archimedean/Basic.lean,Mathlib/Algebra/Order/Module/Defs.lean,Mathlib/Algebra/Order/Nonneg/Basic.lean,Mathlib/Algebra/Order/Nonneg/Field.lean,Mathlib/Algebra/Order/Nonneg/Floor.lean,Mathlib/Algebra/Order/Nonneg/Module.lean,Mathlib/Algebra/Order/Nonneg/Ring.lean,Mathlib/Analysis/Convex/Cone/Basic.lean,Mathlib/Analysis/Convex/Segment.lean,Mathlib/Data/NNReal/Defs.lean,Mathlib/Geometry/Convex/Cone/Dual.lean,Mathlib/Geometry/Convex/Cone/Pointed.lean,Mathlib/MeasureTheory/Function/SimpleFuncDenseLp.lean,Mathlib/MeasureTheory/Integral/SetToL1.lean,Mathlib/RingTheory/Finiteness/Basic.lean,Mathlib/Topology/Algebra/Field.lean,Mathlib/Topology/Algebra/Order/Module.lean |
17 |
3 |
['SnirBroshi', 'github-actions', 'martinwintermath'] |
nobody |
27-72113 27 days ago |
27-74524 27 days ago |
27-76640 27 days |
| 41137 |
plp127 author:plp127 |
fix: include `[NPow F]` in `FunLike.monoidWithZero` |
Include a `NPow` assumption in `FunLike.monoidWithZero` and `FunLike.semiring` and `FunLike.ring` instead of using `npowRec`. See https://github.com/leanprover-community/mathlib4/pull/37779#discussion_r3399574849.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
18/8 |
Mathlib/Data/FunLike/Ring.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
27-58926 27 days ago |
27-60416 27 days ago |
27-60377 27 days |
| 40826 |
felixpernegger author:felixpernegger |
feat(ci): autolabel PRs with "Generated with Claude Code" |
When one tells Claude code to open a PR, it will usually end the description with "🤖 Generated with [Claude Code](https://claude.com/claude-code)" (Im sure almost everyone will have seen this at this point).
This PR adds an action that will autolabel PRs with that ending as "LLM-generated", which might save a bit of time.
[List of all such PRs to mathlib](https://github.com/leanprover-community/mathlib4/pulls?q=is%3Apr+%F0%9F%A4%96+Generated+with+Claude+Code+)
(Ironically enough, I made this PR with Codex...)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
CI
LLM-generated
|
44/0 |
.github/workflows/label_llm_generated.yml,docs/workflows.md |
2 |
6 |
['SnirBroshi', 'felixpernegger', 'github-actions', 'joneugster'] |
nobody |
26-62137 26 days ago |
36-81693 36 days ago |
36-81918 36 days |
| 41188 |
Scarlett-le author:Scarlett-le |
feat(Geometry/Euclidean): obtuse and right angle criteria from inner product sign |
This PR adds criteria characterising when an unoriented angle is at least, or
strictly greater than, `π / 2`, in terms of the sign of an inner product or a
comparison of squared distances. They are the obtuse/right-angle counterparts of
the existing equality results `InnerProductGeometry.inner_eq_zero_iff_angle_eq_pi_div_two`
and the if-and-only-if Pythagorean theorem
`EuclideanGeometry.dist_sq_eq_dist_sq_add_dist_sq_iff_angle_eq_pi_div_two`.
### New lemmas
`Mathlib/Analysis/SpecialFunctions/Trigonometric/Inverse.lean`
- `Real.pi_div_two_le_arccos : π / 2 ≤ arccos x ↔ x ≤ 0`
- `Real.pi_div_two_lt_arccos : π / 2 < arccos x ↔ x < 0`
Duals of the existing `Real.arccos_le_pi_div_two` / `Real.arccos_lt_pi_div_two`,
both `@[simp]`.
`Mathlib/Geometry/Euclidean/Angle/Unoriented/Basic.lean`
- `InnerProductGeometry.inner_nonpos_iff_pi_div_two_le_angle`
- `InnerProductGeometry.inner_neg_iff_pi_div_two_lt_angle`
`Mathlib/Geometry/Euclidean/Angle/Unoriented/RightAngle.lean`
- `EuclideanGeometry.dist_sq_add_dist_sq_le_dist_sq_iff_pi_div_two_le_angle` |
|
41/0 |
Mathlib/Analysis/SpecialFunctions/Trigonometric/Inverse.lean,Mathlib/Geometry/Euclidean/Angle/Unoriented/Basic.lean,Mathlib/Geometry/Euclidean/Angle/Unoriented/RightAngle.lean |
3 |
1 |
['github-actions'] |
nobody |
26-33351 26 days ago |
26-35197 26 days ago |
26-35077 26 days |
| 41217 |
Probablism author:Probablism |
feat(SimpleGraph/Matching): add graph-level IsMatching |
Closes #11911.
This adds a graph-level `SimpleGraph.IsMatching` predicate. It is support-based, so isolated
vertices are allowed: every vertex in the graph support is incident to exactly one edge.
The existing `Subgraph.IsMatching` predicate is unchanged. I added compatibility lemmas relating it
to `M.spanningCoe`, including an iff characterizing the subgraph predicate as graph-level matching
plus `M.support = M.verts`.
Validation:
- `lake env lean Mathlib/Combinatorics/SimpleGraph/Matching.lean`
- `lake build Mathlib.Combinatorics.SimpleGraph.Matching`
- `lake build Mathlib.Combinatorics.SimpleGraph.Hall Mathlib.Combinatorics.SimpleGraph.Tutte Mathlib.Combinatorics.SimpleGraph.UniversalVerts`
- `lake exe lint-style Mathlib/Combinatorics/SimpleGraph/Matching.lean`
- `lake build Mathlib`
- `lake test`
AI assistance: OpenAI Codex assisted with testing and validation.
|
t-combinatorics
new-contributor
|
41/3 |
Mathlib/Combinatorics/SimpleGraph/Matching.lean |
1 |
4 |
['Probablism', 'SnirBroshi', 'github-actions'] |
nobody |
25-68778 25 days ago |
25-69967 25 days ago |
25-69847 25 days |
| 38292 |
kim-em author:kim-em |
feat(AlgebraicTopology): universal cover construction |
This PR constructs the universal cover of a path-connected, locally path-connected, semilocally simply connected space `X` as the based-path space modulo endpoint-preserving homotopy, topologised by coinduction from the compact-open based-path space.
Split across five files:
* `Topology/Homotopy/TubeNeighborhood.lean` — class-free machinery: `IsPathHomotopyTrivial`, tube neighborhoods in path space, their openness in the compact-open topology, and the ladder-homotopy pasting argument showing any two paths in a common tube are homotopic.
* `AlgebraicTopology/FundamentalGroupoid/SemilocallySimplyConnected.lean` — `SemilocallySimplyConnectedAt/On/Space`, defined via the classical based condition (trivial `π₁(U, x) → π₁(X, x)`), with the unbased upgrade on locally path-connected spaces, and discreteness of `Path.Homotopic.Quotient`.
* `AlgebraicTopology/FundamentalGroupoid/BasedPath.lean` — the based-path space (with `FunLike`/`ContinuousEval` instances) and the path-component machinery of `endpoint ⁻¹' U`.
* `AlgebraicTopology/FundamentalGroupoid/UniversalCover/Basic.lean` — quotient topology, `proj`, and the sheet decomposition.
* `AlgebraicTopology/FundamentalGroupoid/UniversalCover/Covering.lean` and `Action.lean` — `isCoveringMap`, `pathConnectedSpace`, `simplyConnectedSpace`, the universal lifting property, and the free, properly discontinuous `π₁(X, x₀)`-action making `proj` a quotient covering map.
I want to note this takes a different approach than Hatcher et al, which build the universal cover as the path space, but with a "custom" topology. It is then a theorem (often not proved in textbooks) that with the usual hypotheses this topology coincides with the one coinduced from the compact-open topology. I decided that "the mathlib way" was just to start with the "natural" topology, and not take this shortcut.
🤖 Prepared with Claude Code and Codex.
|
|
2831/35 |
Mathlib.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/BasedPath.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/Basic.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/FundamentalGroup.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/SemilocallySimplyConnected.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/UniversalCover/Action.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/UniversalCover/Basic.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/UniversalCover/Covering.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/Homotopy/Path.lean,Mathlib/Topology/Homotopy/TubeNeighborhood.lean,Mathlib/Topology/Path.lean,Mathlib/Topology/Subpath.lean,Mathlib/Topology/UnitInterval.lean |
14 |
50 |
['github-actions', 'kim-em', 'mathlib-merge-conflicts'] |
nobody |
25-58589 25 days ago |
25-59954 25 days ago |
25-59834 25 days |
| 41223 |
YaelDillies author:YaelDillies |
feat(LInearAlgebra): predicate version of `mem_span_iff_linearCombination` |
This is necessary after #39582.
From Toric
---
There are *many* more lemmas that will need to be similarly duplicated to accommodate #39582. I personally think it is more reasonable to revert #39582.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
toric
label:t-algebra$ |
4/0 |
Mathlib/LinearAlgebra/Finsupp/LinearCombination.lean |
1 |
1 |
['github-actions'] |
nobody |
25-47971 25 days ago |
25-50110 25 days ago |
25-49990 25 days |
| 40768 |
AlexeyMilovanov author:AlexeyMilovanov |
Add a reachability characterization for PFun.fix |
Add a `ReflTransGen` characterization of `PFun.fix` and use it to simplify one Turing machine proof. |
new-contributor |
27/13 |
Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Data/PFun.lean |
2 |
2 |
['github-actions'] |
nobody |
25-23753 25 days ago |
25-23753 25 days ago |
25-23633 25 days |
| 35669 |
SnirBroshi author:SnirBroshi |
feat(Mathlib/Data/Finset/Mex): `sInf sᶜ ≤ s.encard` |
---
It's in a separate file because I couldn't find a sensible place with the required imports, not because "mex" is particularly interesting.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #35821
- [x] depends on: #35822
[](https://gitpod.io/from-referrer/)
|
t-order |
59/0 |
Mathlib.lean,Mathlib/Data/Finset/Mex.lean |
2 |
14 |
['SnirBroshi', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
25-14307 25 days ago |
25-14853 25 days ago |
29-17187 29 days |
| 38432 |
SnirBroshi author:SnirBroshi |
feat(Logic/Relation): `Map r f g ≤ s ↔ r ≤ s.bicompl f g` |
and the dual `s ≤ Relation.Map r f g ↔ s.bicompl f g ≤ r` which requires `f` and `g` to be bijective.
Adds `Galois{Connection/Insertion/Coinsertion}` for the dual.
The theorems are specialized to `onFun` instead of `bicompl` for when `f = g`.
A `GaloisConnection` for the iff in the title requires `f`/`g` to be bijective, but then we can get an `OrderIso` which is stronger (see #38499).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
126/28 |
Mathlib/Logic/Relation.lean,Mathlib/Order/GaloisConnection/Basic.lean |
2 |
5 |
['SnirBroshi', 'github-actions', 'plp127'] |
nobody |
25-11393 25 days ago |
25-14435 25 days ago |
93-31965 93 days |
| 31892 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Sphere/PolePolar): poles and polars |
Define poles and polars for spheres in Euclidean affine spaces, and set up some basic API, including in particular La Hire's theorem (`p₁` lies on the polar of `p₂` if and only if `p₂` lies on the polar of `p₁`).
Poles and polars are actually meaningful for any quadric in a projective space over any field, but I think it's reasonable to set up this theory for spheres in the Euclidean context and potentially link it in future to more general projective geometry.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #31891
- [x] depends on: #32296
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
158/0 |
Mathlib.lean,Mathlib/Geometry/Euclidean/Sphere/PolePolar.lean |
2 |
10 |
['Parcly-Taxel', 'github-actions', 'jsm28', 'kim-em', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
24-63258 24 days ago |
24-64067 24 days ago |
121-4309 121 days |
| 41259 |
felixpernegger author:felixpernegger |
chore: remove redudant `nonrec`'s |
Remove all `nonrec` which are just not needed, about 9% of all `nonrec` occurences (tech debt)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
62/62 |
Mathlib/Algebra/Colimit/DirectLimit.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/AlgebraicGeometry/Cover/MorphismProperty.lean,Mathlib/AlgebraicGeometry/Morphisms/ClosedImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Descent.lean,Mathlib/AlgebraicGeometry/Morphisms/QuasiFinite.lean,Mathlib/AlgebraicGeometry/Sites/SheafQuasiCompact.lean,Mathlib/Analysis/Calculus/Deriv/Comp.lean,Mathlib/Analysis/Calculus/Deriv/Star.lean,Mathlib/Analysis/Calculus/FDeriv/Basic.lean,Mathlib/Analysis/Calculus/FDeriv/WithLp.lean,Mathlib/Analysis/Complex/PhragmenLindelof.lean,Mathlib/Analysis/Complex/Trigonometric.lean,Mathlib/Analysis/Normed/Group/Quotient.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Computability/RecursiveIn.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Cycle.lean,Mathlib/Data/NNReal/Defs.lean,Mathlib/Data/Rel/Cover.lean,Mathlib/Data/Rel/Separated.lean,Mathlib/Geometry/Euclidean/Inversion/Calculus.lean,Mathlib/Geometry/Manifold/ContMDiff/Constructions.lean,Mathlib/Geometry/Manifold/ContMDiff/NormedSpace.lean,Mathlib/LinearAlgebra/Multilinear/Basic.lean,Mathlib/MeasureTheory/Group/Arithmetic.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/Basic.lean,Mathlib/MeasureTheory/Measure/Decomposition/Lebesgue.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/ModelTheory/Ultraproducts.lean,Mathlib/NumberTheory/BernoulliPolynomials.lean,Mathlib/Probability/Density.lean,Mathlib/Probability/Moments/Variance.lean,Mathlib/RingTheory/Flat/Basic.lean,Mathlib/RingTheory/Ideal/KrullsHeightTheorem.lean,Mathlib/RingTheory/Polynomial/Resultant/Basic.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/FiberBundle/Basic.lean,Mathlib/Topology/Filter.lean,Mathlib/Topology/Homotopy/Basic.lean,Mathlib/Topology/Instances/ENat.lean,Mathlib/Topology/MetricSpace/MetricSeparated.lean,Mathlib/Topology/MetricSpace/Pseudo/Basic.lean,Mathlib/Topology/Order/LocalExtr.lean |
44 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
24-63008 24 days ago |
24-70112 24 days ago |
24-69992 24 days |
| 40193 |
BoltonBailey author:BoltonBailey |
chore(1000.yaml): add entries |
This PR adds data on a number of previously missing entries to 1000.yaml that were found during the course of Project Numina's preparation of LeanTriathlon.
These include:
- `comment`s with references to formalized statements of theorems (mostly from the formal-conjectures repo) in cases where they exist, (it seems that, while we can add unproven statements and statements from other repos, we can't really include unproven statements from other repos using the system as it currently exists)
- `comment`s about related definitions to certain theorems in mathlib.
- `url` references to a few complete formalizations in a variety of other repositories.
- `decl` for the preexisting `prime_ideal_of_disjoint_filter_ideal` theorem in Mathlib, which as far as I can tell is just a more general version of the Boolean Prime Ideal theorem.
AI was used in large scale scans to identify these missing entries, but I have done my best to check manually that the statements are correct.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
17/2 |
docs/1000.yaml |
1 |
9 |
['BoltonBailey', 'github-actions', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
24-60003 24 days ago |
24-60504 24 days ago |
51-72887 51 days |
| 41273 |
SnirBroshi author:SnirBroshi |
feat(Order/ConditionallyCompleteLattice): antitone versions of `sSup (f '' s)` lemmas |
`f (sInf s) = sSup (f '' s)` and `f (sSup s) = sInf (f '' s)` for an antitone function and a finite nonempty set.
Matches the existing monotone lemmas.
---
Followup to #35822
I think the `Basic.lean` lemmas don't hold for `{Mono/Anti}toneOn f s`, but the `Finset.lean` lemmas should, though I haven't done that yet.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
39/19 |
Mathlib/Order/ConditionallyCompleteLattice/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Finset.lean |
2 |
1 |
['github-actions'] |
nobody |
24-56176 24 days ago |
24-58797 24 days ago |
24-58677 24 days |
| 41288 |
lua-vr author:lua-vr |
feat(EReal): add_eq_top_iff_eq_top_* |
Adds `add_eq_top_iff_eq_top_{left,right}` and replaces the proofs of the `ne` versions with `.ne`. `add_ne_top_iff_of_ne_bot_of_ne_top` was duplicated, so I deprecated it.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
11/6 |
Mathlib/Data/EReal/Operations.lean |
1 |
1 |
['github-actions'] |
nobody |
24-26699 24 days ago |
24-28094 24 days ago |
24-27974 24 days |
| 41297 |
plp127 author:plp127 |
feat: cardinality of `Ultrafilter` |
We prove there are `2 ^ 2 ^ #α` ultrafilters on an infinite type `α`. For completeness, we also provide the cardinality lemma when `α` is finite.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
t-set-theory
|
142/0 |
Mathlib.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/Ultrafilter/Basic.lean,Mathlib/Order/Filter/Ultrafilter/Cardinality.lean |
4 |
1 |
['github-actions'] |
nobody |
23-85209 23 days ago |
24-19867 24 days ago |
24-19747 24 days |
| 41241 |
intgrah author:intgrah |
feat(Order/Category): cartesian closed and distributive structure on PartOrd and Preord |
Give `PartOrd` and `Preord` `CartesianMonoidalCategory`, `MonoidalClosed`, and `IsCartesianDistributive` instances.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
|
272/0 |
Mathlib.lean,Mathlib/Order/Category/PartOrd/CartesianClosed.lean,Mathlib/Order/Category/PartOrd/Distributive.lean,Mathlib/Order/Category/Preord/CartesianClosed.lean,Mathlib/Order/Category/Preord/Distributive.lean |
5 |
5 |
['github-actions', 'intgrah'] |
nobody |
23-83576 23 days ago |
25-21754 25 days ago |
25-21634 25 days |
| 38587 |
dagurtomas author:dagurtomas |
feat(Tactic/CategoryTheory): concrete category boilerplate |
Adds `mk_concrete_category`, a command for generating the initial boilerplate for concrete categories whose morphisms are given by a bundled function type.
The command creates the wrapper `Hom` type, named category and concrete category instances, `ofHom`, `Hom.hom`, and the basic dsimp lemmas.
It handles parameterized categories such as `ModuleCat`, and has a paired additive/multiplicative form for generating both structures at once (e.g. `MonCat`/`AddMonCat`).
Includes test categories checking the generated declarations.
[](https://gitpod.io/from-referrer/)
|
LLM-generated
t-meta
t-category-theory
|
905/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/CategoryTheory/MkConcreteCategory.lean,MathlibTest/CategoryTheory/MkConcreteCategory.lean |
4 |
8 |
['dagurtomas', 'eric-wieser', 'github-actions'] |
nobody |
23-66200 23 days ago |
80-55794 80 days ago |
80-56435 80 days |
| 40665 |
Yu-Misaka author:Yu-Misaka |
feat(RepresentationTheory): the character values of a finite group are algebraic integers |
Zulip link: [#Is there code for X? > Integrality of character](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Integrality.20of.20character/with/603655189)
The proof comes from Seed Prover (lean-eval) and was golfed by me.
Co-authored-by: @GanjinZero
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41242
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
16/3 |
Mathlib/RepresentationTheory/Character.lean |
1 |
14 |
['Yu-Misaka', 'bwangpj', 'copilot-pull-request-reviewer', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'tb65536', 'yuanyi-350'] |
nobody |
23-61054 23 days ago |
23-62168 23 days ago |
39-82042 39 days |
| 34799 |
vlad902 author:vlad902 |
feat(SimpleGraph): the cycle graph and complete graph are Hamiltonian |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #34797
- [ ] depends on: #35255
- [ ] depends on: #37930
[](https://gitpod.io/from-referrer/) |
t-combinatorics
large-import
|
22/0 |
Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean |
1 |
6 |
['SnirBroshi', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vlad902'] |
nobody |
23-40757 23 days ago |
24-84986 24 days ago |
24-85417 24 days |
| 32282 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Angle/Incenter): unoriented angle bisection |
Add lemmas giving unoriented angles involving the incenter and excenters of a triangle as expressions involving dividing angles of the triangle by 2, deduced from oriented bisection lemmas.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #30981
- [ ] depends on: #30982
- [ ] depends on: #31205
- [ ] depends on: #32019
- [ ] depends on: #32021
- [ ] depends on: #32259
- [ ] depends on: #32260
- [ ] depends on: #32270
- [ ] depends on: #32273
- [ ] depends on: #32278
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
92/0 |
Mathlib/Geometry/Euclidean/Angle/Incenter.lean |
1 |
19 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'wwylele'] |
nobody |
23-31943 23 days ago |
23-32235 23 days ago |
120-85691 120 days |
| 41317 |
Raph-DG author:Raph-DG |
chore(Function): ext lemma checking points in the support |
In this PR, we add in a variant of ext_iff_mulSupport which checks two functions are equal by checking they are equal at all points of the union of their supports. This was originally part of #38472, but having this lemma modify such a low level file was making it difficult to work on that PR
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
9/0 |
Mathlib/Algebra/Notation/Support.lean |
1 |
2 |
['github-actions'] |
nobody |
23-31226 23 days ago |
23-33942 23 days ago |
23-33822 23 days |
| 41327 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Subgraph): `induce` lemmas |
`Subgraph.induce` API for sup / inf / iSup / iInf / inter / iUnion / iInter (union already exists)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
58/0 |
Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
1 |
1 |
['github-actions'] |
nobody |
23-13451 23 days ago |
23-14815 23 days ago |
23-14695 23 days |
| 41305 |
martinwintermath author:martinwintermath |
feat(Geometry/Convex/ConvexSpace): consistency adjustments for convexity on module and affine space |
This PR makes a few consistency adjustments to improve the use of `ConvexSpace` with modules and affine spaces.
- make `IsModuleConvexSpace.ofModule` into an instance
- deprecate `isModuleConvexSpace_self` since now derived from `IsModuleConvexSpace.ofModule`
- rename `ConvexSpace.ofAddTorsor := AddTorsor.toConvexSpace`
- add class `IsAffineConvexSpace` and instance `IsAffineConvexSpace.ofAddTorsor`
- add instance deriving `IsAffineConvexSpace R V V` from `IsModuleConvexSpace R V`
With this PR, to use the standard convexity on an affine space we do no longer need the (usually too agressiv)
```lean4
attribute [local instance] AddTorsor.toConvexSpace
```
but the more general
```lean4
variable [ConvexSpace R P] [IsAffineConvexSpace R V P]
```
which now works analogously to convexity on modules. See the fixed instance `IsConvexDist` for metric spaces.
Zulip: [#PR reviews > Convexity refactor](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/Convexity.20refactor/with/607934406)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry |
49/16 |
Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Geometry/Convex/ConvexSpace/AffineSpace.lean,Mathlib/Geometry/Convex/ConvexSpace/Module.lean |
3 |
1 |
['github-actions'] |
nobody |
23-8770 23 days ago |
23-73981 23 days ago |
23-78265 23 days |
| 41336 |
SnirBroshi author:SnirBroshi |
chore(Combinatorics/SimpleGraph/Girth): golf `egirth_top` using `cycleGraph` |
Golf `egirth_top` (#38529) using `cycleGraph_isContained_iff` (#35255)
Co-authored-by: Vlad Tsyrklevich <vlad@tsyrklevi.ch>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
6/11 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
1 |
['github-actions'] |
nobody |
22-67778 22 days ago |
22-68298 22 days ago |
22-68178 22 days |
| 41337 |
gotrevor author:gotrevor |
doc(1000-yaml): add Goodstein's theorem and the Kirby–Paris theorem |
Claims two listed-but-unclaimed entries in the 1000+ theorems scoreboard by adding external-formalization pointers (no mathlib declaration; same pattern as Löb's theorem [`Q204884`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L201), the flypitch continuum-hypothesis independence [`Q208416`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L216), and Arrow's impossibility theorem [`Q33481`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L30)).
## Entries
| Wikidata | Theorem | Formalization |
|----------|---------|---------------|
| `Q1149185` | **Goodstein's theorem** — every Goodstein sequence terminates | [`lean-gallery`](https://github.com/gotrevor/lean-gallery/blob/main/LeanGallery/Logic/Goodstein/Statement.lean) (ordinal-descent proof) |
| `Q1149185X` | **Kirby–Paris theorem** — PA does not prove that every Goodstein sequence terminates | [`goodstein-independence`](https://github.com/gotrevor/goodstein-independence/blob/main/src/GoodsteinPA/Statement.lean) |
## Notes
- **`Q1149185X` (Kirby–Paris, 1982)** is built on the [`FormalizedFormalLogic/Foundation`](https://github.com/FormalizedFormalLogic/Foundation) library (the same library that backs the existing Löb's-theorem entry [`Q204884`](https://github.com/leanprover-community/mathlib4/blob/master/docs/1000.yaml#L201)), via the Wainer growth-rate route (`Goodstein` outgrows every PA-provably-total function). The headline `peano_not_proves_goodstein` is sorry-free and `#print axioms`-clean — it rests on exactly `[propext, Classical.choice, Quot.sound]`.
- **`Q1149185`** is Goodstein's theorem proper (the termination statement, provable in ZFC / Lean); mathlib does not currently contain it.
- Both formalizations are by Trevor Morris, developed with AI assistance: Claude Code (Fable 5, Opus), Codex, and Harmonic's Aristotle.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
new-contributor
LLM-generated
|
6/0 |
docs/1000.yaml |
1 |
4 |
['felixpernegger', 'github-actions'] |
nobody |
22-64465 22 days ago |
22-66720 22 days ago |
22-66600 22 days |
| 40953 |
ymonbru author:ymonbru |
feat: the definition of a KSheaf on a T2 Space |
This files adds the definition of a KSheaf on a T2 space with value in an arbitrary category.
One may expect this notion to come from sheaves on a site of compact subset of a topological space but there is no coresponding Grothendieck topology on compact subsets. In particular, this is because one of the axioms is in the form of a colimit and can't be expressed as a limit condition (hence a sheaf condition).
It also adds API that allow to use the axioms in a convenient way.
---
- [ ] depends on: #40737
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
133/0 |
Mathlib.lean,Mathlib/Topology/Sheaves/KSheaf.lean |
2 |
9 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'ymonbru'] |
nobody |
22-40964 22 days ago |
22-40964 22 days ago |
22-51579 22 days |
| 41358 |
erdkocak author:erdkocak |
doc(ModelTheory): fix partial equivalence theorem reference |
Fix a stale module doc reference in `ModelTheory.PartialEquiv`: the theorem is `equiv_between_cg`, and the conclusion is an isomorphism `M ≃[L] N`.
---
This documentation-only PR was split out from #41111 following review feedback.
Please note that ChatGPT Codex was used to help prepare this documentation-only PR. |
t-logic
new-contributor
|
3/3 |
Mathlib/ModelTheory/PartialEquiv.lean |
1 |
2 |
['github-actions'] |
nobody |
22-36033 22 days ago |
22-36622 22 days ago |
22-36502 22 days |
| 41111 |
erdkocak author:erdkocak |
feat(ModelTheory): add cardinal-generated substructure API |
This is the first PR in a sequence splitting #40561.
It adds a `CardinalLTGenerated` predicate for substructures, basic closure and map lemmas, and the finitely generated specialization.
Co-authored-by: Yağız Kaan Aydoğdu <y.kaan.aydogdu@gmail.com>
Co-authored-by: Yusuf Demir <yusufdemir12610@gmail.com>
Advised-by: Ayhan Günaydın <ayhan.gunaydin@bogazici.edu.tr>
Advised-by: Metin Ersin Arıcan <metin.arican@bogazici.edu.tr>
Please note that we utilized agentic AI tools (Claude Opus, ChatGPT Codex) during the development of this PR. Most of the proofs of the major theorems are direct translations from human-language source material (see the diff in `references.bib`) into Lean proofs using the mentioned AI tools. However, all design and formalization decisions were made by us. |
t-logic
new-contributor
LLM-generated
|
51/0 |
Mathlib/ModelTheory/FinitelyGenerated.lean,Mathlib/ModelTheory/Substructures.lean |
2 |
9 |
['NoahW314', 'erdkocak', 'felixpernegger', 'github-actions'] |
nobody |
22-35178 22 days ago |
22-35985 22 days ago |
28-33554 28 days |
| 40925 |
JovanGerb author:JovanGerb |
chore(CategoryTheory/Functor/Category): don't expose `NatTrans.hcomp` |
This PR hides the definition of `NatTrans.hcomp`, because it has two equally sensible possible definitions. As a result, we can get rid of the `to_dual_insert_cast`. `simps` doesn't work for non-exposed definition, so `hcomp_app` is proved separately, and its dual `hcomp_app'` is added.
Note: some proofs break, because the `dsimp` set changes, due to the definition not being exposed. This is a bit unfortunate. There was some discussion on Zulip about changing `dsimp` for category theory into a simp set, which would fix this problem, because we could then add `hcomp_app` to this set.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
maintainer-merge
tech debt
|
30/15 |
Mathlib/AlgebraicTopology/DoldKan/NCompGamma.lean,Mathlib/AlgebraicTopology/DoldKan/PInfty.lean,Mathlib/CategoryTheory/Functor/Category.lean,Mathlib/CategoryTheory/Monoidal/Action/End.lean,Mathlib/CategoryTheory/Monoidal/End.lean,Mathlib/CategoryTheory/Triangulated/TStructure/SpectralObject.lean,Mathlib/CategoryTheory/Types/Basic.lean |
7 |
11 |
['JovanGerb', 'github-actions', 'grunweg', 'leanprover-radar', 'riccardobrasca'] |
nobody |
22-24052 22 days ago |
33-21949 33 days ago |
33-22636 33 days |
| 41100 |
tb65536 author:tb65536 |
refactor(RingTheory/Localization/AtPrime/Basic): replace `IsLiesOverAlgebra` with `IsScalarTower` |
As @erdOne pointed out on #38465, the recently added `IsLiesOverAlgebra` is equivalent to assuming `IsScalarTower`. So I've deprecated `IsLiesOverAlgebra` and switched everything over to `IsScalarTower`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
71/57 |
Mathlib/RingTheory/Flat/Localization.lean,Mathlib/RingTheory/LocalRing/ResidueField/Fiber.lean,Mathlib/RingTheory/LocalRing/ResidueField/Ideal.lean,Mathlib/RingTheory/LocalRing/ResidueField/Instances.lean,Mathlib/RingTheory/LocalRing/ResidueField/Polynomial.lean,Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/QuasiFinite/Basic.lean,Mathlib/RingTheory/QuasiFinite/Weakly.lean,Mathlib/RingTheory/RamificationInertia/Inertia.lean,Mathlib/RingTheory/RamificationInertia/Ramification.lean,Mathlib/RingTheory/Unramified/LocalRing.lean,Mathlib/RingTheory/Unramified/LocalStructure.lean,Mathlib/RingTheory/Unramified/Locus.lean |
13 |
8 |
['chrisflav', 'github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
22-11547 22 days ago |
22-12470 22 days ago |
29-18873 29 days |
| 41364 |
SnirBroshi author:SnirBroshi |
chore(SimpleGraph/Clique): tidy `CliqueFree` iff lemmas |
Add `G.CliqueFree n ↔ (completeGraph (Fin n)).Free G` and rename two other iff theorems to fit better.
Since `Free` is not infix it should come before `top` when naming, `cliqueFree_iff` should mention its RHS since it isn't obvious, and `Fintype.card` should be mentioned.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
18/8 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Extremal/Turan.lean |
2 |
1 |
['github-actions'] |
nobody |
21-72943 21 days ago |
22-11134 22 days ago |
22-11014 22 days |
| 41373 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph): some `CliqueFree`/`Free` lemmas |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
29/0 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Copy.lean |
2 |
1 |
['github-actions'] |
nobody |
21-72706 21 days ago |
21-73284 21 days ago |
21-73164 21 days |
| 41369 |
tb65536 author:tb65536 |
feat(RingTheory/Localization/Ideal): generalize `IsLocalization.isMaximal_of_isMaximal_disjoint` |
This PR generalizes the existing `IsLocalization.isMaximal_of_isMaximal_disjoint` in `RingTheory/Jacobson/Ring` to arbitrary localizations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
21/18 |
Mathlib/RingTheory/Jacobson/Ring.lean,Mathlib/RingTheory/KrullDimension/Polynomial.lean,Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/Localization/Ideal.lean |
4 |
1 |
['github-actions'] |
nobody |
21-70453 21 days ago |
21-70500 21 days ago |
21-70381 21 days |
| 41378 |
tb65536 author:tb65536 |
chore(RingTheory/QuasiFinite/Basic): extract instance from ramification proof |
This PR extracts an instance from the proof of `Ideal.ramificationIdx_pos`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
13/7 |
Mathlib/RingTheory/QuasiFinite/Basic.lean,Mathlib/RingTheory/RamificationInertia/Ramification.lean |
2 |
1 |
['github-actions'] |
nobody |
21-64425 21 days ago |
21-64470 21 days ago |
21-64351 21 days |
| 39864 |
8e7 author:8e7 |
feat(Combinatorics/SimpleGraph/Acyclic): helly property on subtrees |
This PR adds several lemmas regarding connected subsets of vertices in trees (subtrees). The main result is the Helly property for subtrees: For a finite set of subtrees, if any pair of subtrees intersect, then there is a common vertex in all subtrees.
This lemma is part of an effort to formalize tree decompositions (see #38334), and will be used in a future PR to prove `G.cliqueNum - 1 <= G.treeWidth`.
AI Usage: The proofs were developed with the help of Claude Code. I vouch for all the code written and understand the content fully.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
|
114/0 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean |
2 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
21-56199 21 days ago |
21-56754 21 days ago |
39-70807 39 days |
| 41379 |
tb65536 author:tb65536 |
chore(RingTheory/*): remove domain assumptions by generalizing from torsion free to faithful smul |
This PR removes some `IsDomain` assumptions by generalizing `Module.IsTorsionFree` to `FaithfulSMul`.
(As @SnirBroshi pointed out in the comments, this is not quite a generalization when the top ring is the zero ring, but this never arises in practice).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
7/7 |
Mathlib/RingTheory/Conductor.lean,Mathlib/RingTheory/Ideal/Maps.lean,Mathlib/RingTheory/Ideal/Over.lean |
3 |
3 |
['SnirBroshi', 'github-actions', 'tb65536'] |
nobody |
21-42471 21 days ago |
21-62044 21 days ago |
21-61925 21 days |
| 40829 |
FrankieNC author:FrankieNC |
feat(MeasureTheory): eLpNorm bound for a convex combination of functions |
Adds `eLpNorm_sum_smul_le`: if `w i ≥ 0` for `i ∈ s`, `∑ i ∈ s, w i = 1`, and each `eLpNorm (h i) 1 μ ≤ B`, then `eLpNorm (∑ i ∈ s, w i • h i) 1 μ ≤ B`. In other words, a convex combination of functions whose `L¹`-seminorms are bounded by `B` again has `L¹`-seminorm at most `B`. |
t-measure-probability
brownian
|
18/1 |
Mathlib/MeasureTheory/Function/LpSeminorm/TriangleInequality.lean |
1 |
6 |
['CoolRmal', 'EtienneC30', 'FrankieNC', 'github-actions'] |
EtienneC30 assignee:EtienneC30 |
21-24355 21 days ago |
21-25057 21 days ago |
33-44177 33 days |
| 41388 |
emlis42 author:emlis42 |
feat(Data/Set): add mono of right inv |
This PR adds some theorems about monotonicity of right inverse of some map.
This is mainly for discoverability and includes a strict version of `monotoneOn_of_rightInvOn_of_mapsTo` i.e `strictMonoOn_of_rightInvOn_of_mapsTo`.
Discussed here: [Lemmas about `StrictMono`/`Monotone` maps with right inverse](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Lemmas.20about.20.60StrictMono.60.2F.60Monotone.60.20maps.20with.20right.20inverse) |
t-data |
36/3 |
Mathlib/Data/Set/Monotone.lean |
1 |
1 |
['github-actions'] |
nobody |
21-2608 21 days ago |
21-5133 21 days ago |
21-5013 21 days |
| 41194 |
RemyDegenne author:RemyDegenne |
feat: define `riskIncrease` (statistical information) |
This PR adds a measure of the information in a statistical experiment: the increase of risk that follows from discarding the result of the experiment.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
139/0 |
Mathlib.lean,Mathlib/Probability/Decision/RiskIncrease.lean,docs/references.bib |
3 |
1 |
['github-actions'] |
kex-y assignee:kex-y |
20-67142 20 days ago |
26-24213 26 days ago |
26-24237 26 days |
| 41225 |
kebekus author:kebekus |
feat: tag circle integrability as fun_prop |
On a suggestion of @j-loreaux, tag circle integrability as `fun_prop` to aid proof automatization.
Note: Experiments show that much of the automatization benefit is realized only if `MeromorphicOn` will also become `fun_prop`. This is out of scope here, but will be addressed in a follow-up PR.
Disclaimer: Clode Code was used in the preparation of this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
52/6 |
Mathlib/Analysis/Complex/ValueDistribution/Proximity/Basic.lean,Mathlib/Analysis/SpecialFunctions/Integrability/LogMeromorphic.lean,Mathlib/Analysis/SpecialFunctions/Integrals/PosLogEqCircleAverage.lean,Mathlib/MeasureTheory/Integral/CircleIntegral.lean |
4 |
1 |
['github-actions'] |
RemyDegenne assignee:RemyDegenne |
20-67141 20 days ago |
25-46261 25 days ago |
25-46141 25 days |
| 40347 |
thorimur author:thorimur |
perf(Mathlib.Tactic.Linter.Header): different implementation for header linter |
This PR tries a different implementation strategy for the header linter: identify whether we're linting the first command by parsing the file header quickly, seeing where the final position for the parse lands, and seeing if the current command's start position (stored in the `CommandElabM` context) matches that position. Then, check if the first command is a module doc (or an exempted command) just by looking at the current syntax's kind.
While this does still parse the imports on every command, it does less parsing than the previous implementation.
This reduces interpretation wall-clock by over 10% (at least on the radar machines).
This also changes the behavior slightly:
- adds backticks in messages instead of quotes
- now allows `set_option ... in` before the module docstring
There's still room for improvement: in the future we could try to figure out an interactive-safe cache for the end position of the header (somewhat tricky) and update the string functions to use the new string slice API. (The first part might be easier after some upcoming linting framework changes.)
My guess for why this seems to improve the performance in apparently unrelated metrics is that it reduces pressure on the async computations overall, but to be honest, I'm not sure.
---
Note: happy to make it so that `set_option ... in` cannot now precede the module docstring. This is mostly a matter of where `withSetOptionIn` is.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter |
125/192 |
Mathlib/Tactic/Linter/Header.lean,MathlibTest/DirectoryDependencyLinter/Test.lean,MathlibTest/Linter/Header/Basic.lean,MathlibTest/Linter/Header/Fail.lean |
4 |
44 |
['JovanGerb', 'github-actions', 'grunweg', 'leanprover-radar', 'mathlib-merge-conflicts', 'thorimur'] |
JovanGerb assignee:JovanGerb |
20-11580 20 days ago |
20-14843 20 days ago |
41-11909 41 days |
| 40728 |
Formalistic03 author:Formalistic03 |
feat(Combinatorics/SimpleGraph/Hasse): more properties of Hasse graphs of linear orders |
- two forms of an intermediate value theorem for linear orders
- the Hasse graph of a linear order is acyclic
- a path graph is locally finite
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
large-import
|
97/24 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/CycleGraph.lean,Mathlib/Combinatorics/SimpleGraph/Hasse.lean,Mathlib/Data/Fintype/Defs.lean |
4 |
18 |
['Formalistic03', 'SnirBroshi', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
19-84999 19 days ago |
20-1721 20 days ago |
33-67965 33 days |
| 39722 |
kg583 author:kg583 |
feat(Combinatorics): link `Nat.Partition` to `YoungDiagram` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
AI disclosure: Claude was used to source some proof sketches.
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
large-import
|
111/4 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Partition/Basic.lean,Mathlib/Combinatorics/Enumerative/Partition/YoungDiagram.lean,Mathlib/Combinatorics/Young/YoungDiagram.lean |
4 |
48 |
['NoahW314', 'YaelDillies', 'github-actions', 'kg583', 'wwylele'] |
YaelDillies assignee:YaelDillies |
19-82830 19 days ago |
19-82830 19 days ago |
54-77627 54 days |
| 37683 |
SabrinaJewson author:SabrinaJewson |
feat(Order/OrdContinuous): every map between complete lattices that preserves sSup is a left adjoint of some Galois connection |
It is already proven that the left side of a Galois connection is left-continuous; this provides the converse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #37682
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
|
14/0 |
Mathlib/Order/OrdContinuous.lean |
1 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
19-81211 19 days ago |
19-82878 19 days ago |
19-84205 19 days |
| 40582 |
dennj author:dennj |
feat(Analysis): the one-sided Laplace transform |
Introducing Laplace transform `ℒ(f)(s) = ∫ t in Ioi 0, exp (-s * t) • f t`
It is needed in physlib
I modelled the file following Mellin transform.
## Main definitions
* `LaplaceConvergent f s`: the Laplace integral is well-defined at `s`.
* `laplace f s`: the Laplace transform, a total function
* `HasLaplace f s m`: convergence together with the value `m`.
## Main results
* Linearity: `laplace_add`/`sub`/`const_smul`/`neg`/`zero`/`div_const`, at the `laplace`, `LaplaceConvergent`, and `HasLaplace` levels.
* `laplaceConvergent_iff_norm`, `norm_laplace_le_integral_norm`: reduction of convergence and norm bounds to the real exponential weight.
* `laplaceConvergent_of_isBigO_exp`: existence for functions of exponential order, on the appropriate right half-plane.
* `LaplaceConvergent.of_re_le`/`of_re_lt`: monotonicity of convergence in `s.re` (the half-plane structure).
* `laplace_cexp_smul`: the frequency-shift rule.
* `laplace_indicator_comp_sub`: the time-shift rule.
* `laplace_comp_mul_left`/`right`: behaviour under positive dilation.
* `hasLaplace_const`/`hasLaplace_one`/`hasLaplace_cexp`: basic transform values.
Human made PR |
t-measure-probability
new-contributor
|
571/1 |
Mathlib.lean,Mathlib/Analysis/LaplaceTransform.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/AEStronglyMeasurable.lean,Mathlib/MeasureTheory/Group/Measure.lean,Mathlib/MeasureTheory/Integral/ExpDecay.lean |
5 |
3 |
['github-actions'] |
CoolRmal assignee:CoolRmal |
19-67140 19 days ago |
42-53005 42 days ago |
42-60741 42 days |
| 40683 |
dennj author:dennj |
feat(Analysis/Matrix): prove Hadamard's determinant inequality |
This PR adds Hadamard's maximal determinant inequality: a real matrix with entries bounded by `1` in absolute value has determinant at most the Hadamard bound.
This is the classical extremal theorem behind Hadamard matrices. The equality case is also proved, so `Matrix.IsHadamard` is characterized as exactly the matrices attaining the maximal determinant. This turns the existing Hadamard matrix API into the solution of its natural optimization problem, rather than only an algebraic definition.
The proof also adds a few small reusable pieces of API connecting matrix rows with Euclidean-space determinants, Gram-Schmidt equality cases, and row-orthogonality recognition of Hadamard matrices. |
t-analysis |
255/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/GramSchmidtOrtho.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/Matrix/HadamardInequality.lean,Mathlib/LinearAlgebra/Matrix/HadamardMatrix.lean |
5 |
2 |
['github-actions', 'wwylele'] |
CoolRmal assignee:CoolRmal |
19-67138 19 days ago |
39-77877 39 days ago |
39-77757 39 days |
| 41393 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Hamiltonian): a graph is Hamiltonian iff there's a Hamiltonian path with adjacent endpoints |
---
The new public import is needed because `Nat.card` was previously only imported privately.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
38/1 |
Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean |
1 |
1 |
['github-actions'] |
nobody |
19-42154 19 days ago |
20-69647 20 days ago |
20-69527 20 days |
| 41208 |
tb65536 author:tb65536 |
chore(FieldTheory/Galois/IsGaloisGroup): remove FaithfulSMul assumptions |
A few results in IsGaloisGroup.lean are proved by passing to fraction fields which requires assuming FaithfulSMul. This PR removes the FaithfulSMul assumption by first passing to the image subring.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
28/29 |
Mathlib/FieldTheory/Galois/IsGaloisGroup.lean,Mathlib/NumberTheory/RamificationInertia/Galois.lean,Mathlib/RingTheory/IsGaloisGroup/Basic.lean |
3 |
1 |
['Whysoserioushah', 'github-actions'] |
nobody |
19-32280 19 days ago |
25-82450 25 days ago |
25-82331 25 days |
| 41401 |
vlad902 author:vlad902 |
feat(RingTheory): `Ideal.span` corollaries of Krull's height theorem |
Currently we have statements bounding the height of minimal primes of `Ideal.span s`. Add the obvious corollaries to bound the height of `Ideal.span s` directly.
Also add a `Set.encard`-valued statement of Krulls' height theorem for `Ideal.span`s. In a Noetherian ring we know the bound should always be finite, but this is useful in downstream applications that are using ENats.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
26/1 |
Mathlib/RingTheory/Ideal/KrullsHeightTheorem.lean |
1 |
1 |
['github-actions'] |
nobody |
19-31777 19 days ago |
20-37730 20 days ago |
20-38071 20 days |
| 40303 |
MichaelStollBayreuth author:MichaelStollBayreuth |
feat(AlgebraicGeometry/EllipticCurve/Affine): more on `xRep` |
This PR adds explicit formulas for `xRep` of a sum of two (affine) points on a Weierstrass curve.
This will be needed on the way to the Mordell-Weil Theorem for elliptic curves.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry |
116/0 |
Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Formula.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Affine/Point.lean |
2 |
17 |
['MichaelStollBayreuth', 'Multramate', 'github-actions'] |
Multramate and mattrobball assignee:Multramate assignee:mattrobball |
19-25162 19 days ago |
28-85727 28 days ago |
49-84253 49 days |
| 41449 |
EzequielS2 author:EzequielS2 |
feat(Topology/ContinuousMap): domMulAct action on C(X, Y) |
## Summary
- Define the action of `Mᵈᵐᵃ` on `C(α, β)` when `M` acts continuously on `α`.
- Add `SMul`, `MulAction`, `SMulCommClass`, and `ContinuousSMul` instances.
- Closes #5379.
## Test plan
- [x] `lake build Mathlib.Topology.ContinuousMap.DomAct`
- [x] `lake exe runLinter Mathlib.Topology.ContinuousMap.DomAct`
|
t-topology
new-contributor
|
101/0 |
Mathlib.lean,Mathlib/Topology/ContinuousMap/DomAct.lean |
2 |
3 |
['github-actions'] |
nobody |
19-9958 19 days ago |
19-10663 19 days ago |
19-10543 19 days |
| 41454 |
EzequielS2 author:EzequielS2 |
feat(Topology/ContinuousMap): domMulAct action on bounded continuous maps |
## Summary
- Define the action of `Mᵈᵐᵃ` on bounded continuous functions `α →ᵇ β`.
- Add basic instances and simp lemmas.
## Dependency
Depends on #41449. I will rebase onto `master` after that PR merges.
## Test plan
- [x] `lake build Mathlib.Topology.ContinuousMap.Bounded.DomAct`
- [x] `lake exe runLinter Mathlib.Topology.ContinuousMap.Bounded.DomAct`
|
new-contributor
t-topology
|
184/0 |
Mathlib.lean,Mathlib/Topology/ContinuousMap/Bounded/DomAct.lean,Mathlib/Topology/ContinuousMap/DomAct.lean |
3 |
2 |
['github-actions'] |
nobody |
19-5440 19 days ago |
19-7647 19 days ago |
19-7527 19 days |
| 41450 |
chenson2018 author:chenson2018 |
chore: remove uses of `Subrelation` |
Following up on the description of #40792, this removes additional uses of `Subrelation` now that #30526 has been merged.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
19/20 |
Mathlib/Logic/Relation.lean |
1 |
1 |
['github-actions'] |
nobody |
19-4674 19 days ago |
19-8464 19 days ago |
19-8344 19 days |
| 41458 |
SnirBroshi author:SnirBroshi |
feat(Data/List/Basic): lists with equal `tail` and `dropLast` are equal |
(except for subsingleton lists), and also lists with equal `head?` and `tail`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
17/0 |
Mathlib/Data/List/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
19-2612 19 days ago |
19-5416 19 days ago |
19-5296 19 days |
| 41469 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Coloring/EdgeLabeling): `Unique` & `IsEmpty` instances and simplify `mk` |
---
The changes aren't related, they're just small so I grouped them together.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
8/5 |
Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeLabeling.lean |
1 |
1 |
['github-actions'] |
nobody |
18-81916 18 days ago |
18-83806 18 days ago |
18-83686 18 days |
| 39663 |
Raph-DG author:Raph-DG |
feat(Topology): A spectral map between quasi-separated, prespectral sober spaces has compact fibers |
In this PR, we develop some API around the constructible topology, culminating in the fact that a spectral map between quasi-separated, prespectral sober spaces has compact fibers. To see why this might be of interest, note that the analogous theorem in algebraic geometry (that a quasiseparated map between schemes has quasicompact fibers) does not require any global separatedness assumptions, and the proof of this is very algebraic. So we have the somewhat mysterious situation that it seems as though there are nontrvial topological restrictions on the kinds of spectral maps which can be the underlying maps of morphisms of schemes.
This PR was originally part of #26304, a PR on pushforwards of algebraic cycles. This is where the notion of compactness of fibers becomes relevant, as this guarantees each coefficient of the pushforward of a cycle is computed by a finite sum.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
large-import
|
178/6 |
Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Constructible.lean,Mathlib/Topology/Defs/Induced.lean,Mathlib/Topology/Maps/Proper/Basic.lean,Mathlib/Topology/Spectral/ConstructibleTopology.lean,Mathlib/Topology/WithTopology.lean |
6 |
5 |
['Raph-DG', 'chrisflav', 'github-actions', 'j-loreaux'] |
CoolRmal assignee:CoolRmal |
18-67143 18 days ago |
45-21444 45 days ago |
50-5366 50 days |
| 40250 |
mcdoll author:mcdoll |
feat(Dynamics): add `Homeomorph.flow` |
Define the discrete flow by iterating a homeomorphism.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #40259
[](https://gitpod.io/from-referrer/)
|
t-dynamics |
29/0 |
Mathlib/Dynamics/Flow.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
urkud assignee:urkud |
18-67141 18 days ago |
34-39779 34 days ago |
34-39659 34 days |
| 40296 |
RemyDegenne author:RemyDegenne |
feat: define `HasCoveringExponent` |
This PR adds a definition `HasCoveringExponent`, that states that a set has a covering number that satisfies a certain bound at all scales.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
brownian
t-measure-probability
|
97/0 |
Mathlib.lean,Mathlib/Topology/MetricSpace/CoveringExponent.lean |
2 |
1 |
['github-actions'] |
CoolRmal assignee:CoolRmal |
18-67138 18 days ago |
50-15845 50 days ago |
50-15725 50 days |
| 40735 |
tb65536 author:tb65536 |
feat(NumberTheory/NumberField/AdeleRing): define the idele class group |
This PR defines the idele class group and the maps from the completions at finite places. This will be used to define Hecke L-Functions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
t-algebra
label:t-algebra$ |
82/5 |
Mathlib/NumberTheory/NumberField/AdeleRing.lean,Mathlib/NumberTheory/NumberField/InfiniteAdeleRing.lean,Mathlib/RingTheory/DedekindDomain/FiniteAdeleRing.lean,Mathlib/Topology/Algebra/RestrictedProduct/Basic.lean |
4 |
4 |
['github-actions', 'smmercuri'] |
riccardobrasca assignee:riccardobrasca |
18-67134 18 days ago |
38-78944 38 days ago |
38-78825 38 days |
| 41459 |
EzequielS2 author:EzequielS2 |
feat(Algebra/Group): mulOpposite equivs for submonoid and subgroup |
## Summary
Add MulOpposite monoid equivalences for submonoids and subgroups, and remove the corresponding TODOs in `Subsemiring/MulOpposite.lean`.
## Test plan
- [x] `lake build` and `lake exe runLinter` on `Mathlib.Algebra.Group.Submonoid.MulOpposite` and `Mathlib.Algebra.Group.Subgroup.MulOpposite`
|
t-algebra
new-contributor
label:t-algebra$ |
78/4 |
Mathlib/Algebra/Group/Subgroup/MulOpposite.lean,Mathlib/Algebra/Group/Submonoid/MulOpposite.lean,Mathlib/Algebra/Ring/Subsemiring/MulOpposite.lean |
3 |
9 |
['EzequielS2', 'github-actions', 'wwylele'] |
nobody |
18-66495 18 days ago |
19-4265 19 days ago |
19-4145 19 days |
| 41466 |
EzequielS2 author:EzequielS2 |
feat(Algebra/Order): stronger sublist product inequality via diff |
## Summary
Add `Sublist.prod_le_prod'_of_mem_diff` and `Sublist.sum_le_sum_of_mem_diff`.
## Test plan
- [x] `lake build` and `lake exe runLinter` on `Mathlib.Algebra.Order.BigOperators.Group.List`
|
t-algebra
new-contributor
label:t-algebra$ |
13/4 |
Mathlib/Algebra/Order/BigOperators/Group/List.lean |
1 |
6 |
['EzequielS2', 'github-actions', 'wwylele'] |
nobody |
18-65308 18 days ago |
18-85037 18 days ago |
18-84917 18 days |
| 41473 |
CoolRmal author:CoolRmal |
feat(MeasureTheory): prove regular measures have conull support |
This PR proves in `MeasureTheory.Measure.Support` that any measure which is compact-inner-regular on open sets has conull support. It also records the consequences for `[μ.InnerRegular]` on spaces with `[OpensMeasurableSpace X]` and for `[μ.Regular]`.
It first proves compact subsets of `μ.supportᶜ` have measure zero, then applies `InnerRegularWRT IsCompact IsOpen`. The inner-regular and regular statements are corollaries.
Created with the help of codex.
|
t-measure-probability |
38/2 |
Mathlib/MeasureTheory/Measure/Support.lean |
1 |
1 |
['github-actions'] |
urkud assignee:urkud |
18-64111 18 days ago |
18-72541 18 days ago |
18-72421 18 days |
| 41218 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Star): the star graph is the only triangle-free graph with a universal vertex |
- `starGraph r |>.CliqueFree 3`
- `G.IsUniversal v → G.CliqueFree 3 → G = starGraph v`
- `G.IsUniversal v → (G.IsAcyclic ↔ G.CliqueFree 3)`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
29/4 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Star.lean |
2 |
3 |
['github-actions', 'vlad902'] |
nobody |
18-53821 18 days ago |
25-12853 25 days ago |
25-68438 25 days |
| 41310 |
SnirBroshi author:SnirBroshi |
feat(Algebra/Group/Subgroup/ZPowers/Lemmas): generalize from pairs to `Finset`s |
Generalize `closure_eq_zmultiples`/`zmultiples_sup`/`zmultiples_inf` from pairs to `Finset`s. For `s : Finset ℤ`:
- `closure (s : Set ℤ) = zmultiples (s.gcd id)`
- `s.sup zmultiples = zmultiples (s.gcd id)`
- `s.inf zmultiples = zmultiples (s.lcm id)`
---
If the large imports aren't okay we could have a new `ZPowers/Finset.lean` or `ZPowers/FinsetLemmas.lean`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41261
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
28/3 |
Mathlib/Algebra/Group/Subgroup/ZPowers/Lemmas.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
18-50322 18 days ago |
18-51636 18 days ago |
18-53637 18 days |
| 40957 |
kebekus author:kebekus |
feat: characterize mermorphic functions with finite set of poles in terms of logarithmic counting function |
Deliver on an open TODO. showing that a meromorphic function has a finite set of poles if and only if its logarithmic counting function is big-O of log. This material will later be used to characterize rational and algebraic functions among all meromorphic functions in terms of their characteristic (a.k.a. Nevanlinna height)
Claude Code was used in the preparation of this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
120/17 |
Mathlib/Analysis/Asymptotics/Defs.lean,Mathlib/Analysis/Calculus/ContDiff/FaaDiBruno.lean,Mathlib/Analysis/Complex/ValueDistribution/LogCounting/Asymptotic.lean,Mathlib/Analysis/Distribution/TemperateGrowth.lean,Mathlib/Analysis/Polynomial/Basic.lean,Mathlib/NumberTheory/ModularForms/Bounds.lean,Mathlib/NumberTheory/ModularForms/NormTrace.lean,Mathlib/Topology/LocallyFinsupp.lean |
8 |
14 |
['github-actions', 'j-loreaux', 'kebekus'] |
urkud assignee:urkud |
18-48192 18 days ago |
18-48192 18 days ago |
32-78401 32 days |
| 41467 |
vlad902 author:vlad902 |
chore(MulLECancellable): rename lemmas |
Right now MulLECancellable has dual `Injective/inj` and `injective_left/inj_left` lemmas. Rename the first pair to `injective_right/inj_right` to match and add a `IsRightRegular` lemma to match the `IsLeftRegular` one.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
25/9 |
Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Order/Sub/Unbundled/Basic.lean,Mathlib/Data/ENNReal/Operations.lean |
3 |
1 |
['github-actions'] |
nobody |
18-39968 18 days ago |
18-42927 18 days ago |
18-45593 18 days |
| 39993 |
Brian-Nugent author:Brian-Nugent |
feat(Topology/CategoryTheory): TopologicalSpace.Opens.map preserves colimits and finite limits |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39992
- [ ] depends on: #39991
[](https://gitpod.io/from-referrer/)
|
t-topology
t-category-theory
large-import
|
50/17 |
Mathlib/Geometry/RingedSpace/OpenImmersion.lean,Mathlib/Geometry/RingedSpace/PresheafedSpace/Gluing.lean,Mathlib/Topology/Category/TopCat/Opens.lean,Mathlib/Topology/Sheaves/Presheaf.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
18-37234 18 days ago |
18-37237 18 days ago |
18-37117 18 days |
| 31135 |
kckennylau author:kckennylau |
feat(RingTheory): is localization iff is localization on saturation |
In this PR we show that `A` is a localization of `R` on the submonoid `S` iff it is so on the saturation of `S`.
Crucially, the saturation of `S` is precisely the elements that become a unit in `A`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #31132
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
53/0 |
Mathlib.lean,Mathlib/RingTheory/Localization/Saturation.lean |
2 |
20 |
['alreadydone', 'chrisflav', 'github-actions', 'kckennylau', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'riccardobrasca'] |
chrisflav and joneugster assignee:joneugster assignee:chrisflav |
18-31870 18 days ago |
18-32423 18 days ago |
65-32449 65 days |
| 36346 |
kckennylau author:kckennylau |
chore: add simp lemma to unfold Algebra.algHom |
```lean
@[simp] lemma Algebra.coe_algHom : ⇑(Algebra.algHom R A B) = algebraMap A B := rfl
```
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
6/2 |
Mathlib/Algebra/Algebra/Hom.lean,Mathlib/RingTheory/Etale/StandardEtale.lean |
2 |
9 |
['acmepjz', 'artie2000', 'github-actions', 'kckennylau', 'mathlib-merge-conflicts', 'ocfnash'] |
ocfnash assignee:ocfnash |
18-28209 18 days ago |
18-31277 18 days ago |
44-53254 44 days |
| 41443 |
alreadydone author:alreadydone |
feat(RingTheory/AdjoinRoot): add AdjoinRoot.isFractionRing |
Co-authored-by: Sriram Chinthalagiri Venkata @sriram3301
Co-authored-by: David Kurniadi Angdinata @Multramate
This contribution was created as part of the Heidelberg Lean workshop "Formalising algebraic geometry" in November 2025.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-ring-theory
label:t-algebra$ |
88/7 |
Mathlib/RingTheory/AdjoinRoot.lean,Mathlib/RingTheory/Algebraic/Integral.lean,Mathlib/RingTheory/Localization/Algebra.lean |
3 |
3 |
['alreadydone', 'github-actions', 'leanprover-radar'] |
nobody |
18-25249 18 days ago |
18-78886 18 days ago |
19-21147 19 days |
| 41306 |
vlad902 author:vlad902 |
feat(SimpleGraph): reduce CycleGraph imports |
Reduce the imports for CycleGraph.lean and re-prove and move a few lemmas around as a result.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
44/23 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/CycleGraph.lean,Mathlib/Combinatorics/SimpleGraph/Hasse.lean |
3 |
13 |
['SnirBroshi', 'github-actions', 'vlad902'] |
nobody |
18-22417 18 days ago |
23-40762 23 days ago |
23-40684 23 days |
| 36813 |
AlexeyMilovanov author:AlexeyMilovanov |
feat(Computability.Encoding): add self-delimiting unary and pair encodings |
Adds self-delimiting boolean encodings to `Mathlib.Computability.Encoding`.
**Key changes:**
* **`unaryPrefixEncodingNat`**: A self-delimiting unary `Encoding ℕ Bool`, using the code $1^n0$.
* **`encodingProdBool`**: Builds an `Encoding (α × β) Bool` from boolean encodings of `α` and `β`, by prefixing the length of the first encoded component.
* **`encodingListBool`**: Builds an `Encoding (List α) Bool` from a boolean encoding of `α`, using self-delimiting element encodings.
* **`UnaryPrefix` helpers**: Internal-style helper API for the underlying length-prefixed boolean-list encoding and decoding. |
t-computability
new-contributor
|
98/0 |
Mathlib/Computability/Encoding.lean |
1 |
6 |
['AlexeyMilovanov', 'Komyyy', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
18-12669 18 days ago |
18-12669 18 days ago |
34-54826 34 days |
| 41503 |
JovanGerb author:JovanGerb |
feat(GRewrite): support strict rewriting in `>`/`≥` |
This PR adds `gcongr strict` tags in order to support strict rewriting in `≥`/`>`. Previously this only worked in `≤`/`<`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
9/0 |
Mathlib/Order/Basic.lean,MathlibTest/Tactic/GRewrite.lean |
2 |
1 |
['github-actions'] |
nobody |
18-10611 18 days ago |
18-14068 18 days ago |
18-13948 18 days |
| 41512 |
teorth author:teorth |
feat (Order/Interval/Finset/Floor): Relating membership of an Int or Nat cast in intervals to intervals of floor and ceil functions |
For a `FloorRing` (resp. `FloorSemiring`) `α`, we relate membership of a cast `↑n` in an interval
of `α` to membership of the integer (resp. natural number) `n` in the corresponding interval with
floor/ceil endpoints, for instance `Int.coe_mem_Ioc_iff : ↑n ∈ Set.Ioc a b ↔ n ∈ Set.Ioc ⌊a⌋ ⌊b⌋`.
If the right-hand side is finite, we express them as `Finset` instead.
---
AI was used to extend a small initial set of human-generated lemmas to the full set in this PR, which were then reviewed and edited by myself.
This code is placed in a new file because the core `Algebra.Order.Floor` files explicitly disallow the use of `Finset`.
[](https://gitpod.io/from-referrer/)
|
t-order |
85/0 |
Mathlib.lean,Mathlib/Order/Interval/Finset/Floor.lean |
2 |
2 |
['github-actions'] |
nobody |
17-84683 17 days ago |
17-86314 17 days ago |
17-86194 17 days |
| 41514 |
teorth author:teorth |
feat(Topology/MetricSpace/Heine-Cantor): metric ε-δ forms of Heine–Cantor |
Add (pseudo-)metric space (or "epsilon-delta") versions of many of the versions of the Heine-Cantor theorem (continuous functions on compacta are uniformly continuous) from `Topology.UniformSpace.HeineCantor` into a new file
`Topology.Metric.HeineCantor`.
---
A new file needed to be created because many files downstream of this file blocked the use of `UniformOnFun`.
AI assistance was used to expand a small initial set of human-generated lemmas into a larger set, with the latter then reviewed by both an AI tool and myself.
[](https://gitpod.io/from-referrer/)
|
t-topology |
71/0 |
Mathlib.lean,Mathlib/Topology/MetricSpace/HeineCantor.lean |
2 |
2 |
['github-actions'] |
nobody |
17-77755 17 days ago |
17-79342 17 days ago |
17-79323 17 days |
| 38055 |
felixpernegger author:felixpernegger |
feat(Topology/EMetricSpace): add r-variation |
Redoing #37007 (I had accidently deleted my fork which nuked the PR).
See https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/p-variation for discussion.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
t-analysis
|
409/0 |
Mathlib.lean,Mathlib/Topology/EMetricSpace/RVariation.lean |
2 |
4 |
['felixpernegger', 'github-actions', 'mathlib-merge-conflicts'] |
fpvandoorn assignee:fpvandoorn |
17-76476 17 days ago |
17-77561 17 days ago |
101-36809 101 days |
| 41312 |
EtienneC30 author:EtienneC30 |
feat: the indicator of a set is a Bernoulli random variable |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
large-import
|
40/0 |
Mathlib/Probability/Distributions/Bernoulli.lean |
1 |
1 |
['github-actions'] |
CoolRmal assignee:CoolRmal |
17-67138 17 days ago |
23-40709 23 days ago |
23-41095 23 days |
| 41322 |
RemyDegenne author:RemyDegenne |
feat: variants of `Measurable.oneLePart` and related lemmas |
This PR does 3 things:
- add lemmas about measurability of `oneLePart`, `leOnePart`, `posPart` and `negPart` of functions
- generalize the existing lemmas from `Group` to `DivInvMonoid` (and `AddGroup` to `SubNegMonoid`, which covers `EReal`).
- use notation for those positive and negative parts instead of their full names.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
38/15 |
Mathlib/MeasureTheory/Order/Group/Lattice.lean |
1 |
1 |
['github-actions'] |
kex-y assignee:kex-y |
17-67137 17 days ago |
23-27754 23 days ago |
23-27634 23 days |
| 38975 |
ldct author:ldct |
feat(EReal): Add equations for EReal |
Add equational lemmas for the simplifier to simplify `[natural number literal] + ⊤` in `EReal`, and add a test file in `MathlibTest/EReal.lean`.
Without these lemmas, `simp` fails to close many of the goals in `MathlibTest/EReal.lean`. I believe simp should close all of them.
An alternative is to add something like this as a simp lemma, to allow `top_add_of_ne_bot` to make progress, but it's not clear to me that this is desirable as a simp lemma, since it's not equational
```
example {n : ℕ} [n.AtLeastTwo] : (ofNat(n) : EReal) ≠ ⊤ := by
exact Ne.symm (not_eq_of_beq_eq_false rfl)
```
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
32/0 |
Mathlib/Data/EReal/Operations.lean,MathlibTest/EReal.lean |
2 |
2 |
['github-actions', 'vihdzp'] |
nobody |
17-66248 17 days ago |
81-73433 81 days ago |
81-73313 81 days |
| 40534 |
mcdoll author:mcdoll |
feat(Algebra): introduce notation typeclass for composition of functions |
This PR defines two new typeclasses: `FComp` and `IsCompApply`. The former is just a notation typeclass with notation `(g ∘ᶠ f)` and the second one asserts that `(g ∘ᶠ f) x = g (f x)`.
---
There are two PRs that illustrate the use of these classes: #41169 and #41224
The second one is closer to what we actually implement here, but not sorry-free (because I ran into unrelated defeq abuse pretty far down the line)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
106/15 |
Mathlib/Algebra/Notation/Defs.lean,Mathlib/Algebra/SkewMonoidAlgebra/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Data/FunLike/IsApply.lean,Mathlib/Geometry/Manifold/GroupLieAlgebra.lean,Mathlib/Geometry/Manifold/VectorField/LieBracket.lean,Mathlib/NumberTheory/Height/Basic.lean,Mathlib/Probability/Distributions/Gaussian/HasGaussianLaw/Independence.lean,Mathlib/RingTheory/Coalgebra/Basic.lean,Mathlib/Topology/VectorBundle/Hom.lean |
10 |
1 |
['github-actions'] |
nobody |
17-56572 17 days ago |
17-56572 17 days ago |
17-56452 17 days |
| 41098 |
vlad902 author:vlad902 |
feat(RingTheory): krull dimension of a polynomial ring in an infinite number of variables |
Add a simp lemma that `dim(R[X_1, ...]) = ∞` and also derive an ENat-valued lemma that `dim(R[X_s]) = dim(R) + card(X_s)`. Note that I keep the original lemma for finite index sets as @[simp] since this is likely to be the more common case in practice.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
30/1 |
Mathlib/Data/ENat/Basic.lean,Mathlib/RingTheory/KrullDimension/NonZeroDivisors.lean,Mathlib/RingTheory/KrullDimension/Polynomial.lean |
3 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
17-42517 17 days ago |
17-44549 17 days ago |
29-2926 29 days |
| 41293 |
riccardobrasca author:riccardobrasca |
feat: add WeierstrassCurve.exists_variableChange_lift |
We add `WeierstrassCurve.exists_variableChange_lift`, a variable change over the fraction field between integral Weierstrass equations descends to the
base ring if its `u` coefficient descends to a unit of the base ring.
---
A first version of the code has been generated by Claude, but it has gone through extensive review by me before opening the PR.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry |
45/0 |
Mathlib/AlgebraicGeometry/EllipticCurve/Reduction.lean |
1 |
2 |
['Multramate', 'github-actions'] |
Multramate assignee:Multramate |
17-41774 17 days ago |
17-42330 17 days ago |
18-34212 18 days |
| 41154 |
sgouezel author:sgouezel |
feat: the variation of a Stieltjes vector measure |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
338/3 |
Mathlib/MeasureTheory/VectorMeasure/BoundedVariation.lean,Mathlib/MeasureTheory/VectorMeasure/Variation/Basic.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
EtienneC30 assignee:EtienneC30 |
17-38809 17 days ago |
17-40208 17 days ago |
26-75496 26 days |
| 41399 |
vlad902 author:vlad902 |
feat(MvPolynomial): ideal generated by variables is prime over a domain |
---
AI: Used Claude to help search for lemmas and golf, no AI code made it into the final PR.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
38/5 |
Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/RingTheory/MvPolynomial/Ideal.lean |
2 |
1 |
['github-actions'] |
nobody |
17-37852 17 days ago |
20-37746 20 days ago |
20-39037 20 days |
| 40952 |
tb65536 author:tb65536 |
feat(Algebra/Group/Subgroup/Basic): monotonicity of inertia subgroups |
This PR proves that inertia subgroups are monotone.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
5/1 |
Mathlib/Algebra/Group/Subgroup/Basic.lean |
1 |
1 |
['Multramate', 'github-actions'] |
nobody |
17-36433 17 days ago |
33-16606 33 days ago |
33-16487 33 days |
| 36815 |
EtienneC30 author:EtienneC30 |
feat: a measurable space structure on the type of continuous maps |
Endow the type `C(X, Y)` of continuous maps from `X` to `Y` with the Borel sigma-algebra coming from the compact-open topology and show that, under some assumptions on `X` and `Y`, this is equal to the restriction of the product sigma-algebra over `X → Y`.
Provide a measurable equivalence between `{f : X → Y // Continuous f}` and `C(X, Y)`.
Co-authored-by: @RemyDegenne
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
brownian
t-measure-probability
|
256/0 |
Mathlib.lean,Mathlib/MeasureTheory/Constructions/BorelSpace/ContinuousMap.lean,Mathlib/Topology/Bases.lean,Mathlib/Topology/Basic.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Separation/Regular.lean |
6 |
27 |
['ADedecker', 'EtienneC30', 'felixpernegger', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
17-33876 17 days ago |
82-39090 82 days ago |
122-34320 122 days |
| 41521 |
BryceT233 author:BryceT233 |
chore(Algebra/Order/Antidiag): relax an assumption in the definition of `HasAntidiagonal` |
This PR relaxes the typeclass requirement for `HasAntidiagonal` from `AddMonoid A` to `Add A`, which is useful for defining multiplications in `TotalMonoidAlgebra`(#41472).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
16/17 |
Mathlib/Algebra/Order/Antidiag/Prod.lean,Mathlib/Algebra/Order/Antidiag/Tendsto.lean |
2 |
4 |
['BryceT233', 'eric-wieser', 'github-actions'] |
nobody |
17-31683 17 days ago |
17-33937 17 days ago |
17-57552 17 days |
| 41433 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): more path/circuit/cycle lemmas |
- two `(p.append q).IsPath` lemmas (splitting to either `p` & `q.tail` or `p.dropLast` & `q`)
- `p.reverse.IsCircuit`
- `p.dropLast.IsPath ↔ p.tail.IsPath`
- `p.IsCycle ↔ p.dropLast.IsPath ∧ 3 ≤ p.length`
---
Golfs a few small things using the new lemmas as a drive by.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
35/9 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean |
1 |
1 |
['github-actions'] |
nobody |
17-31051 17 days ago |
17-31626 17 days ago |
19-63392 19 days |
| 40328 |
xroblot author:xroblot |
feat(FieldTheory/IntermediateField): add PowerBasis.ofAdjoinSimpleEqTop |
Adds `PowerBasis.ofAdjoinSimpleEqTop`, the `IntermediateField.adjoin` analogue of the
existing `PowerBasis.ofAdjoinEqTop` (which uses `Algebra.adjoin`): if `α` generates `L`
over `K` (i.e. `K⟮α⟯ = ⊤`) and is integral over `K`, then `α` defines a `PowerBasis`
for `L` over `K`.
The declaration is placed in `Mathlib.FieldTheory.IntermediateField.Adjoin.Basic`
(alongside `adjoin.powerBasis` and `adjoin.finrank`) rather than `Adjoin.Algebra`,
since its proof uses `adjoin.powerBasis` and `PowerBasis.map`.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
18/0 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
17-30003 17 days ago |
49-15240 49 days ago |
49-15362 49 days |
| 41504 |
Paul-Lez author:Paul-Lez |
feat: add formula for the `j`-invariant of an elliptic curve |
This doesn't seem to be in Mathlib yet (?).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry |
4/0 |
Mathlib/AlgebraicGeometry/EllipticCurve/Weierstrass.lean |
1 |
4 |
['Multramate', 'Paul-Lez', 'github-actions'] |
Multramate assignee:Multramate |
17-26036 17 days ago |
18-12707 18 days ago |
18-12587 18 days |
| 41541 |
felixpernegger author:felixpernegger |
chore: prefer `classical` over `open scoped Classical` in proofs |
In #41423 it came up that it is preferable to use `classical` in proofs instead of `open (scoped) Classical`, as its slightly easier to maintain. This PR replaces all such occurences where it can be reasonably done.
This is likely my last PR about this topic.
(I used Claude to fix some git issue, which is why it shows up in the commit)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
111/58 |
Mathlib/Logic/Basic.lean,Mathlib/Logic/Function/Basic.lean,Mathlib/Order/Basic.lean,Mathlib/Order/Defs/PartialOrder.lean |
4 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
17-9666 17 days ago |
17-12741 17 days ago |
17-12621 17 days |
| 41135 |
martinwintermath author:martinwintermath |
feat(Algebra/Order/Nonneg): generalize Nonneg/Field.lean to `DivisionSemiring` |
Generalizes the content of Nonneg/Field.lean from `Semifield` to `DivisionSemiring`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
15/5 |
Mathlib/Algebra/Order/Nonneg/Field.lean |
1 |
5 |
['github-actions', 'leanprover-radar', 'themathqueen'] |
nobody |
17-8351 17 days ago |
27-73469 27 days ago |
27-73349 27 days |
| 41537 |
Mathias-Stout author:Mathias-Stout |
feat(RingTheory/TwoSidedIdeal/Lattice): add lemmas on two-sided ideals |
We add three lemmas on two-sided ideals.
These are analogues of existing lemmas of `Submodule` with the same names.
This prepares a follow-up PR proving that quaternions are central simple.
Co-authored-by: Justus Springer [justusspringer@gmx.de](mailto:justusspringer@gmx.de)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
|
13/0 |
Mathlib/RingTheory/TwoSidedIdeal/Lattice.lean |
1 |
5 |
['Whysoserioushah', 'github-actions', 'kbuzzard'] |
nobody |
17-7000 17 days ago |
17-9443 17 days ago |
17-17100 17 days |
| 41438 |
SnirBroshi author:SnirBroshi |
doc(Matrix): mention bundled forms in docstrings |
Followup to https://github.com/leanprover-community/mathlib4/pull/39123#issuecomment-4798925362
---
As in `Matrix.map`s docstring, the convention is "This is available in bundled forms as" and then listing bundled versions in asterisk bullet-points.
If there's only one item I went with "This is available in a bundled form as X".
For `Matrix.entry{AddHom/AddMonoidHom/LinearMap}` none of them is the "main" definition, so I added "see also" for each of them listing the other two.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
88/15 |
Mathlib/Data/Matrix/Basic.lean,Mathlib/Data/Matrix/Composition.lean,Mathlib/Data/Matrix/Diagonal.lean,Mathlib/Data/Matrix/Mul.lean,Mathlib/LinearAlgebra/Matrix/ConjTranspose.lean,Mathlib/LinearAlgebra/Matrix/Defs.lean,Mathlib/LinearAlgebra/Matrix/Determinant/Basic.lean,Mathlib/LinearAlgebra/Matrix/Permutation.lean |
8 |
6 |
['eric-wieser', 'github-actions', 'mathlib-splicebot', 'themathqueen'] |
nobody |
17-4860 17 days ago |
19-45174 19 days ago |
19-45054 19 days |
| 41548 |
JovanGerb author:JovanGerb |
chore: use `to_dual` for `DedekindCut` |
This PR uses `to_dual` in DedekindCut.
To make this work, we add a shortcut `PartialOrder` instance. We also add some specialized `DedekindCut` theorems, from the more general `Concept` theorems.
Two `gcongr` tags are also added on appropriate lemmas.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
35/18 |
Mathlib/Order/Completion.lean |
1 |
1 |
['github-actions'] |
nobody |
17-3796 17 days ago |
17-4529 17 days ago |
17-4409 17 days |
| 40597 |
xroblot author:xroblot |
feat(GroupTheory/SpecificGroups/Cyclic): add IsCyclic.subgroup_le/eq_subgroup_iff |
Add the following results about subgroup comparison in finite cyclic groups.
In `Mathlib.Algebra.Group.Subgroup.ZPowers.Lemmas`:
- `Int.zmultiples_le_zmultiples_iff`: `zmultiples a ≤ zmultiples b ↔ b ∣ a`
In `Mathlib.GroupTheory.SpecificGroups.Cyclic`:
- `AddSubgroup.zmultiples_le_zmultiples_iff`: `zmultiples (i • g) ≤ zmultiples (j • g) ↔ j.gcd (addOrderOf g) ∣ i.gcd (addOrderOf g)`
- `Subgroup.zpowers_le_zpowers_iff`: multiplicative version
- `Subgroup.zpowers_eq_zpowers_iff'`: `zpowers (g ^ i) = zpowers (g ^ j) ↔ i.gcd (orderOf g) = j.gcd (orderOf g)`
- `IsCyclic.subgroup_le_subgroup_iff`: in a finite cyclic group, `H ≤ K ↔ Nat.card H ∣ Nat.card K`
- `IsCyclic.subgroup_eq_subgroup_iff`: in a finite cyclic group, `H = K ↔ Nat.card H = Nat.card K`
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-group-theory |
113/0 |
Mathlib/Algebra/Group/Subgroup/Ker.lean,Mathlib/Algebra/Group/Subgroup/ZPowers/Lemmas.lean,Mathlib/Data/Nat/GCD/Basic.lean,Mathlib/GroupTheory/OrderOfElement.lean,Mathlib/GroupTheory/SpecificGroups/Cyclic.lean |
5 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
mattrobball assignee:mattrobball |
16-82342 16 days ago |
17-10553 17 days ago |
35-84039 35 days |
| 40448 |
ChiCubed author:ChiCubed |
feat(LinearAlgebra/Dimension): tower law for algebraic extensions |
We generalise the tower law for `Module.rank` to the situation of a module over an algebraic extension of domains.
---
See [the Zulip thread](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Tower.20law.20for.20.60Module.2Erank.60/) for some associated discussion.
I am not sure about in which file these results should live, or what their names should be. For the file I have gone with `LinearAlgebra/Dimension/Algebraic.lean` for now, because these feel more like dimension theorems than `Algebra.IsAlgebraic` theorems, and IMO do not logically fit into the other existing files in `LinearAlgebra/Dimension`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
109/3 |
Mathlib.lean,Mathlib/LinearAlgebra/Dimension/Algebraic.lean,Mathlib/LinearAlgebra/Dimension/Free.lean |
3 |
5 |
['ChiCubed', 'eric-wieser', 'github-actions', 'themathqueen'] |
nobody |
16-78893 16 days ago |
16-80434 16 days ago |
46-45922 46 days |
| 41554 |
felixpernegger author:felixpernegger |
chore: remove `noncomputable section` when only theorems in file |
Removes `noncomputable section` whenever no def/abbrev/instances appear in the section.
This is not the most important change, but prepares for a more general cleanup around `noncomputable`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
10/243 |
Mathlib/Algebra/GroupWithZero/Range.lean,Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/Polynomial/Degree/Domain.lean,Mathlib/Algebra/Polynomial/Degree/Lemmas.lean,Mathlib/Algebra/Polynomial/Degree/Monomial.lean,Mathlib/Algebra/Polynomial/Degree/Support.lean,Mathlib/Algebra/Polynomial/Degree/Units.lean,Mathlib/Algebra/Polynomial/Eval/Algebra.lean,Mathlib/Algebra/Polynomial/Eval/Irreducible.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Analysis/Analytic/Within.lean,Mathlib/Analysis/BoxIntegral/DivergenceTheorem.lean,Mathlib/Analysis/Calculus/ContDiff/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Bounds.lean,Mathlib/Analysis/Calculus/ContDiff/Comp.lean,Mathlib/Analysis/Calculus/ContDiff/Deriv.lean,Mathlib/Analysis/Calculus/ContDiff/FiniteDimension.lean,Mathlib/Analysis/Calculus/ContDiff/RCLike.lean,Mathlib/Analysis/Calculus/Deriv/Mul.lean,Mathlib/Analysis/Calculus/FDeriv/Add.lean,Mathlib/Analysis/Calculus/FDeriv/Basic.lean,Mathlib/Analysis/Calculus/FDeriv/Bilinear.lean,Mathlib/Analysis/Calculus/FDeriv/Comp.lean,Mathlib/Analysis/Calculus/FDeriv/Congr.lean,Mathlib/Analysis/Calculus/FDeriv/Const.lean,Mathlib/Analysis/Calculus/FDeriv/Equiv.lean,Mathlib/Analysis/Calculus/FDeriv/Prod.lean,Mathlib/Analysis/Calculus/FDeriv/RestrictScalars.lean,Mathlib/Analysis/Calculus/ParametricIntegral.lean,Mathlib/Analysis/Complex/CauchyIntegral.lean,Mathlib/Analysis/Complex/ReImTopology.lean,Mathlib/Analysis/Fourier/PoissonSummation.lean,Mathlib/Analysis/Fourier/RiemannLebesgueLemma.lean,Mathlib/Analysis/InnerProductSpace/Continuous.lean,Mathlib/Analysis/MeanInequalities.lean,Mathlib/Analysis/Normed/Module/Dual.lean,Mathlib/Analysis/SpecialFunctions/ExpDeriv.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/GaussianIntegral.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/PoissonSummation.lean,Mathlib/Analysis/SpecialFunctions/JapaneseBracket.lean,Mathlib/Analysis/SpecialFunctions/Log/Monotone.lean,Mathlib/Analysis/SpecialFunctions/Pow/Asymptotics.lean,Mathlib/Analysis/SpecialFunctions/Pow/Continuity.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/ArctanDeriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Complex.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/ComplexDeriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/InverseDeriv.lean,Mathlib/CategoryTheory/Limits/EssentiallySmall.lean,Mathlib/CategoryTheory/Limits/Preserves/Opposites.lean,Mathlib/CategoryTheory/Sites/CoverPreserving.lean,Mathlib/Data/Finsupp/PointwiseSMul.lean,Mathlib/Data/W/Cardinal.lean,Mathlib/Dynamics/Ergodic/Conservative.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/MvRatFunc/Rank.lean,Mathlib/FieldTheory/PurelyInseparable/Tower.lean,Mathlib/Geometry/Euclidean/Angle/Oriented/RightAngle.lean,Mathlib/Geometry/Euclidean/Angle/Sphere.lean,Mathlib/Geometry/Euclidean/Angle/Unoriented/RightAngle.lean,Mathlib/Geometry/Euclidean/Basic.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/Geometry/Manifold/MFDeriv/Basic.lean,Mathlib/Geometry/Manifold/MFDeriv/FDeriv.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/Geometry/Manifold/MFDeriv/UniqueDifferential.lean,Mathlib/Geometry/Manifold/SmoothApprox.lean,Mathlib/Geometry/Manifold/SmoothEmbedding.lean,Mathlib/LinearAlgebra/Charpoly/ToMatrix.lean,Mathlib/LinearAlgebra/Dimension/ErdosKaplansky.lean,Mathlib/LinearAlgebra/Finsupp/Span.lean,Mathlib/LinearAlgebra/LinearIndependent/Basic.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/FiniteField.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/Minpoly.lean,Mathlib/LinearAlgebra/Matrix/Diagonal.lean,Mathlib/LinearAlgebra/PerfectPairing/Restrict.lean,Mathlib/LinearAlgebra/RootSystem/Finite/Lemmas.lean,Mathlib/LinearAlgebra/RootSystem/GeckConstruction/Relations.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/Indicator.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/Real.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Indicator.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Monotonicity.lean,Mathlib/MeasureTheory/Function/LpSeminorm/SMul.lean,Mathlib/MeasureTheory/Function/SpecialFunctions/RCLike.lean,Mathlib/MeasureTheory/Integral/ExpDecay.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/ContDiff.lean,Mathlib/MeasureTheory/Integral/Layercake.lean,Mathlib/MeasureTheory/Integral/Prod.lean,Mathlib/MeasureTheory/MeasurableSpace/Pi.lean,Mathlib/MeasureTheory/MeasurableSpace/Prod.lean,Mathlib/MeasureTheory/Measure/Decomposition/RadonNikodym.lean,Mathlib/MeasureTheory/Measure/Portmanteau.lean,Mathlib/MeasureTheory/OuterMeasure/Basic.lean,Mathlib/NumberTheory/AbelSummation.lean,Mathlib/NumberTheory/LSeries/SumCoeff.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/E2/Summable.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/IsBoundedAtImInfty.lean |
124 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
16-69363 16 days ago |
16-71683 16 days ago |
16-71563 16 days |
| 41085 |
chrisflav author:chrisflav |
feat(CategoryTheory): stalks of a presheaf on an indiscrete topological space |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
84/0 |
Mathlib/CategoryTheory/Limits/Shapes/Terminal.lean,Mathlib/Topology/Category/TopCat/OpenNhds.lean,Mathlib/Topology/Sheaves/Stalks.lean |
3 |
3 |
['chrisflav', 'github-actions', 'plp127'] |
robin-carlier assignee:robin-carlier |
16-67141 16 days ago |
29-82663 29 days ago |
29-83699 29 days |
| 36202 |
vihdzp author:vihdzp |
feat: more theorems on the Cantor normal form |
We also remove some redundant assumptions.
Used in the CGT repo.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory |
68/17 |
Mathlib/SetTheory/Ordinal/CantorNormalForm.lean |
1 |
21 |
['SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
16-66244 16 days ago |
123-36016 123 days ago |
142-27857 142 days |
| 31768 |
Thmoas-Guan author:Thmoas-Guan |
feat(Homology): `Ext` under restrict scalars by `RingEquiv` |
In this PR, we proved that `Ext` commute with ulift functor in `ModuleCat`.
Further more, we provided compatibility with (semi-)linear equiv of general universe.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39133
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-category-theory
label:t-algebra$ |
97/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/ChangeOfRings.lean,Mathlib/Algebra/Category/ModuleCat/Ext/RingEquiv.lean |
3 |
31 |
['Thmoas-Guan', 'dagurtomas', 'github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
mattrobball assignee:mattrobball |
16-58318 16 days ago |
45-55941 45 days ago |
67-13373 67 days |
| 41558 |
JovanGerb author:JovanGerb |
chore(order/ConditionallyCompleteLattice): use `to_dual` more |
This PR uses `to_dual` in most remaining places in `Mathlib.Order.ConditionallyCompleteLattice.Basic`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
98/228 |
Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Defs.lean |
3 |
1 |
['github-actions'] |
nobody |
16-53952 16 days ago |
16-57078 16 days ago |
16-56958 16 days |
| 41559 |
JovanGerb author:JovanGerb |
chore(Data/List/MinMax): use `to_dual` |
This PR uses `to_dual` to translate some theorems about maxima and minima on lists.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
61/179 |
Mathlib/Data/List/MinMax.lean,Mathlib/Tactic/ToDual.lean,Mathlib/Tactic/Translate/ToDual.lean |
3 |
1 |
['github-actions'] |
nobody |
16-52958 16 days ago |
16-56121 16 days ago |
16-56001 16 days |
| 41429 |
felixpernegger author:felixpernegger |
chore(Combinatorics): remove a `set_option backward.privateInPublic` |
Together with #41410 this removes all but one global `set_option backward.privateInPublic true`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
8/7 |
Mathlib/Combinatorics/Matroid/Basic.lean,Mathlib/Combinatorics/Matroid/Dual.lean,Mathlib/Combinatorics/Matroid/Loop.lean,Mathlib/Combinatorics/Matroid/Minor/Restrict.lean |
4 |
13 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts', 'vlad902'] |
nobody |
16-24099 16 days ago |
16-24967 16 days ago |
18-24956 18 days |
| 41565 |
grunweg author:grunweg |
chore: specify doc-strings of auto-generated additive declarations di… |
…rectly
There's no need for add_decl_doc any more.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
64/107 |
Mathlib/Algebra/Category/Grp/Basic.lean,Mathlib/Algebra/Group/Action/Basic.lean,Mathlib/Algebra/Group/Action/Defs.lean,Mathlib/Algebra/Group/Action/Hom.lean,Mathlib/Algebra/Group/Hom/Basic.lean,Mathlib/Algebra/Group/Subsemigroup/Basic.lean,Mathlib/Algebra/Notation/Defs.lean,Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/GroupTheory/Finiteness.lean,Mathlib/MeasureTheory/Group/Action.lean,Mathlib/MeasureTheory/Measure/MeasureSpaceDef.lean,Mathlib/Topology/Algebra/ConstMulAction.lean |
12 |
1 |
['github-actions'] |
nobody |
16-15524 16 days ago |
16-22747 16 days ago |
16-22627 16 days |
| 41598 |
NoahW314 author:NoahW314 |
feat(Algebra/Order/BigOperators): add `Finset.prod_le_prod_of_injOn` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
17/0 |
Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/Algebra/Order/BigOperators/GroupWithZero/Finset.lean |
2 |
1 |
['github-actions'] |
nobody |
15-86102 15 days ago |
16-2069 16 days ago |
16-2360 16 days |
| 41604 |
tb65536 author:tb65536 |
feat(NumberTheory/NumberField/Completion/FinitePlace): compatibility of finite places across an algebra map |
Given an extension of finite places, this PR proves compatibility across an algebra map. Eventually it would be nice to have a version stated purely in terms of `FinitePlace`, but we are lacking the ramification theory of finite places required for this (I have larger plans to do ramification theory for absolute values more generally, but this will take some time).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
t-algebra
label:t-algebra$ |
23/4 |
Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean |
1 |
1 |
['github-actions'] |
nobody |
15-76578 15 days ago |
15-76632 15 days ago |
15-76513 15 days |
| 27451 |
kckennylau author:kckennylau |
feat(RingTheory/Valuation): define ball, closed ball, and sphere |
*From the 2025 Local Class Field Theory Workshop.*
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
27/0 |
Mathlib/RingTheory/Valuation/Basic.lean |
1 |
13 |
['JovanGerb', 'github-actions', 'kckennylau', 'mathlib4-merge-conflict-bot', 'pechersky', 'wwylele'] |
riccardobrasca assignee:riccardobrasca |
15-67150 15 days ago |
50-41639 50 days ago |
68-7478 68 days |
| 39585 |
chrisflav author:chrisflav |
chore(RingTheory): add `rfl` lemmas for `Ideal.quotientInfRingEquivPiQuotient` |
From Pi1.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
11/0 |
Mathlib/RingTheory/Ideal/Quotient/Operations.lean |
1 |
2 |
['felixpernegger', 'github-actions'] |
riccardobrasca assignee:riccardobrasca |
15-67147 15 days ago |
68-8625 68 days ago |
68-8505 68 days |
| 41122 |
chrisflav author:chrisflav |
feat(CategoryTheory): torsors in a cartesian monoidal category |
We define a predicate `ModObj.IsTorsor`: A module object `X` with action by a monoid object `M` is a torsor for a Grothendieck topology `J` if `M` acts simply transitively on `X` and there exists a `J`-covering that trivializes `X`, i.e. after restricting to the cover, `X` admits a section.
We show that having a section is the same as being isomorphic to `M`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
large-import
|
206/7 |
Mathlib.lean,Mathlib/CategoryTheory/Monoidal/Cartesian/Mod.lean,Mathlib/CategoryTheory/Monoidal/Cartesian/Torsor.lean |
3 |
1 |
['github-actions'] |
robin-carlier assignee:robin-carlier |
15-67136 15 days ago |
28-32488 28 days ago |
28-33500 28 days |
| 37865 |
Jun2M author:Jun2M |
feat(Combinatorics/Graph): Edge cut of `Graph` |
This PR introduces
- `edgeCut`: A function on set of vertices that returns the set of edges with exactly one end in the set.
- `IsEdgeCut`: A predicate for set of edges that promises it is `edgeCut` of some set.
- `IsBridge`: An edge `e` is a bridge iff it is a singleton edge cut.
- `IsBond`: An edge Set `B` is bond iff it is minimal nonempty edge cut.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #35879
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
209/0 |
Mathlib/Combinatorics/Graph/Connected/EdgeCut.Lean,Mathlib/Combinatorics/Graph/Subgraph.lean,docs/references.bib |
3 |
12 |
['Jun2M', 'b-mehta', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
15-66247 15 days ago |
36-74705 36 days ago |
93-73041 93 days |
| 39736 |
NoahW314 author:NoahW314 |
feat(RingTheory/MvPolynomial/MonomialOrder): add `leadingTerm` lemmas |
Add lemmas for `leadingTerm` to match those for `leadingCoeff`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
87/0 |
Mathlib/RingTheory/MvPolynomial/MonomialOrder.lean |
1 |
5 |
['Hagb', 'NoahW314', 'github-actions'] |
alreadydone and joneugster assignee:alreadydone assignee:joneugster |
15-66246 15 days ago |
64-58962 64 days ago |
64-58842 64 days |
| 41607 |
mbkybky author:mbkybky |
chore(RingTheory/DedekindDomain): update definitions |
Update [IsDedekindRing](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/DedekindDomain/Basic.html#IsDedekindRing) and [IsDedekindDomainDvr](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/DedekindDomain/Dvr.html#IsDedekindDomainDvr) to extend `IsNoetherianRing A` instead of `IsNoetherian A A`, bringing their definitions closer to the usual mathematical formulations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
2/2 |
Mathlib/RingTheory/DedekindDomain/Basic.lean,Mathlib/RingTheory/DedekindDomain/Dvr.lean |
2 |
1 |
['github-actions'] |
nobody |
15-61108 15 days ago |
15-61980 15 days ago |
15-61860 15 days |
| 41609 |
SnirBroshi author:SnirBroshi |
feat(Data/List/Dedup): `dedup` and `Nodup` lemmas |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
16/0 |
Mathlib/Data/Finset/Card.lean,Mathlib/Data/Finset/Dedup.lean,Mathlib/Data/List/Dedup.lean |
3 |
1 |
['github-actions'] |
nobody |
15-53434 15 days ago |
15-56249 15 days ago |
15-56129 15 days |
| 41476 |
SnirBroshi author:SnirBroshi |
feat(SetTheory/Cardinal/NatCard): length of a nodup list whose elements come from a set |
For a list `l` with `l.Nodup` and a set `s` with `∀ a ∈ l, a ∈ s` we have `l.length ≤ s.encard`,
and similar statements for `Finset`/`Multiset` with `Set.encard`/`Set.ncard`/`ENat.card`/`Nat.card`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory |
82/12 |
Mathlib/Data/Finset/Dedup.lean,Mathlib/SetTheory/Cardinal/NatCard.lean |
2 |
1 |
['github-actions'] |
nobody |
15-53276 15 days ago |
18-61709 18 days ago |
18-61589 18 days |
| 41617 |
joelriou author:joelriou |
feat(Order/Fin): conditions for `Fin.insertNth` to be monotone or strictly monotone |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
102/0 |
Mathlib.lean,Mathlib/Order/Fin/InsertNth.lean |
2 |
1 |
['github-actions'] |
nobody |
15-24734 15 days ago |
15-25310 15 days ago |
15-25190 15 days |
| 39116 |
khwilson author:khwilson |
feat(Topology/Semicontinuity/Michael): michael's selection theorem |
Michael's selection theorem states that a correspondence `f : α → Set β` from a normal, paracompact topological space `α` to a Frechet space `β` that is lower hemicontinuous, and has nonempty, closed, convex values admits a continuous selection, i.e., a map `g : α → β` such that `g x ∈ f x` for all `x`.
This theorem is used in many places, e.g., to find continuous sections to certain functions.
This PR proves this theorem.
N.B. At this time, this PR doesn't pass as it depends on two other PRs which may go through substantial changes
- [x] depends on: #38601
- [x] depends on: #39063
AI Disclosure: Various simplifications and refactors provided by Claude Code and then edited by me.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
282/16 |
Mathlib.lean,Mathlib/Topology/Algebra/Group/Pointwise.lean,Mathlib/Topology/Semicontinuity/Michael.lean |
3 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
CoolRmal assignee:CoolRmal |
15-13161 15 days ago |
18-82607 18 days ago |
21-61294 21 days |
| 40865 |
TJHeeringa author:TJHeeringa |
refactor(Algebra/Module/Equiv): update name and refactor API ofLinearEquiv |
Change the name of `LinearEquiv.ofLinear` to `LinearEquiv.ofLinearMap` and change the API. This replaces `_apply` by `coe_`, introduces `_symm`, which makes `_symm_apply` and `_symm_toLinearMap` redundant, and changes `_toLinearMap` to `toLinearMap_`.
---
This PR is as discussed in https://github.com/leanprover-community/mathlib4/pull/40841#discussion_r3448504317 and https://github.com/leanprover-community/mathlib4/pull/40841#issuecomment-4762175719.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
114/97 |
Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Semi.lean,Mathlib/Algebra/Colimit/Module.lean,Mathlib/Algebra/Module/CharacterModule.lean,Mathlib/Algebra/Module/Equiv/Basic.lean,Mathlib/Algebra/Module/Presentation/Basic.lean,Mathlib/Algebra/Star/Module.lean,Mathlib/Analysis/Normed/Operator/LinearIsometry.lean,Mathlib/LinearAlgebra/Contraction.lean,Mathlib/LinearAlgebra/DirectSum/TensorProduct.lean,Mathlib/LinearAlgebra/Dual/Lemmas.lean,Mathlib/LinearAlgebra/ExteriorPower/Basic.lean,Mathlib/LinearAlgebra/Finsupp/LinearCombination.lean,Mathlib/LinearAlgebra/Matrix/SpecialLinearGroup.lean,Mathlib/LinearAlgebra/Multilinear/DFinsupp.lean,Mathlib/LinearAlgebra/Pi.lean,Mathlib/LinearAlgebra/PiTensorProduct/Basic.lean,Mathlib/LinearAlgebra/PiTensorProduct/DFinsupp.lean,Mathlib/LinearAlgebra/PiTensorProduct/Dual.lean,Mathlib/LinearAlgebra/Projection.lean,Mathlib/LinearAlgebra/Quotient/Basic.lean,Mathlib/LinearAlgebra/TensorProduct/Associator.lean,Mathlib/LinearAlgebra/TensorProduct/Basic.lean,Mathlib/LinearAlgebra/TensorProduct/DirectLimit.lean,Mathlib/LinearAlgebra/TensorProduct/Graded/External.lean,Mathlib/LinearAlgebra/TensorProduct/Map.lean,Mathlib/LinearAlgebra/TensorProduct/Pi.lean,Mathlib/LinearAlgebra/TensorProduct/Prod.lean,Mathlib/LinearAlgebra/TensorProduct/Quotient.lean,Mathlib/LinearAlgebra/TensorProduct/Subalgebra.lean,Mathlib/LinearAlgebra/TensorProduct/Submodule.lean,Mathlib/LinearAlgebra/TensorProduct/Tower.lean,Mathlib/LinearAlgebra/Trace.lean,Mathlib/RepresentationTheory/Coinvariants.lean,Mathlib/RepresentationTheory/FiniteIndex.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/LowDegree.lean,Mathlib/RingTheory/AdicCompletion/AsTensorProduct.lean,Mathlib/RingTheory/AdicCompletion/Functoriality.lean,Mathlib/RingTheory/Extension/Cotangent/Basis.lean,Mathlib/RingTheory/Flat/Equalizer.lean,Mathlib/RingTheory/IsTensorProduct.lean,Mathlib/RingTheory/Localization/Module.lean,Mathlib/RingTheory/MatrixAlgebra.lean,Mathlib/RingTheory/PicardGroup.lean |
44 |
24 |
['TJHeeringa', 'github-actions', 'j-loreaux', 'mathlib-bors', 'mathlib-merge-conflicts', 'themathqueen'] |
nobody |
14-82903 14 days ago |
15-23366 15 days ago |
29-66903 29 days |
| 40156 |
JovanGerb author:JovanGerb |
perf: reduce priority of `DivisionSemiring.toSemiring` |
This PR reduces the priority of `DivisionSemiring.toSemiring`. This is relevant because a lot of type class search starts at `Semiring`, so we need to ensure that the instances that apply to `Semiring` are tried in a sensible order. In particular, this will now prefer `CommSemiring.toSemiring`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
18/15 |
Mathlib/Algebra/Field/Defs.lean,Mathlib/Algebra/Quaternion.lean,Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/Calculus/FDeriv/Add.lean,Mathlib/FieldTheory/SeparableClosure.lean,Mathlib/RingTheory/Etale/Field.lean,Mathlib/RingTheory/QuasiFinite/Polynomial.lean,MathlibTest/GalNotation.lean,MathlibTest/Tactic/Ring/Ring.lean |
9 |
8 |
['JovanGerb', 'github-actions', 'kbuzzard', 'leanprover-radar', 'themathqueen'] |
joelriou assignee:joelriou |
14-67149 14 days ago |
52-11253 52 days ago |
52-12898 52 days |
| 39709 |
justus-springer author:justus-springer |
feat(RingTheory/): `MvPolynomial` is standard smooth |
Add the trivial submersive presentation for `MvPolynomial` and show that `MvPolynomial` is standard smooth over its base ring. This will be used to show that affine space is smooth in #39710.
- [x] depends on: #39708
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
47/0 |
Mathlib/RingTheory/Extension/Presentation/Basic.lean,Mathlib/RingTheory/Extension/Presentation/Submersive.lean,Mathlib/RingTheory/Smooth/StandardSmooth.lean |
3 |
4 |
['faenuccio', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
jjdishere assignee:jjdishere |
14-66247 14 days ago |
36-11783 36 days ago |
61-4118 61 days |
| 41629 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Subgraph): `neighborSet` of `coe`/`spanningCoe` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/3 |
Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
1 |
1 |
['github-actions'] |
nobody |
14-59182 14 days ago |
14-59751 14 days ago |
14-59631 14 days |
| 41632 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Trails): the support of an Eulerian trail equals the support of the graph |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
32/0 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Trails.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
3 |
1 |
['github-actions'] |
nobody |
14-50953 14 days ago |
14-51538 14 days ago |
14-51418 14 days |
| 41633 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): length of closed a walk/trail isn't `1`/`2` |
For a closed walk `p`:
- `p.length ≠ 1`
- `p.IsTrail` → `p.length ≠ 2`
- `p.IsTrail` → `p.length ≤ 2` → `p.Nil`
---
Since a circuit is a closed non-nil trail, `IsTrail.nil_of_length_le_two` is basically the contrapositive of `IsCircuit.three_le_length`, but I think this form is useful.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
11/4 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
14-48954 14 days ago |
14-49606 14 days ago |
14-49486 14 days |
| 41613 |
WenrongZou author:WenrongZou |
feat(ModularForm): add eisensteinSeries G_k^v |
This PR add the Eisenstein series $G_k^{\bar{v}}$, and prove it as a sum of Eisenstein series $E_k^{\bar{v}}$.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import |
179/0 |
Mathlib/Data/ZMod/Basic.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/Basic.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/Defs.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/IsBoundedAtImInfty.lean |
4 |
2 |
['github-actions', 'mathlib-bors'] |
nobody |
14-39402 14 days ago |
14-39402 14 days ago |
14-42503 14 days |
| 41642 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Topology, Geometry and Analysis |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 20 file(s) in **Topology, Geometry and Analysis**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-differential-geometry
|
39/19 |
Mathlib/Geometry/Manifold/Algebra/SMul.lean,Mathlib/Geometry/Manifold/ContMDiff/Basic.lean,Mathlib/Geometry/Manifold/Instances/Quotient.lean,Mathlib/Topology/Algebra/Category/ProfiniteGrp/Basic.lean,Mathlib/Topology/Algebra/Group/DiscontinuousSubgroup.lean,Mathlib/Topology/Algebra/Group/OpenMapping.lean,Mathlib/Topology/Algebra/Group/Pointwise.lean,Mathlib/Topology/Algebra/Group/Quotient.lean,Mathlib/Topology/Algebra/InfiniteSum/Constructions.lean,Mathlib/Topology/Algebra/IsUniformGroup/DiscreteSubgroup.lean,Mathlib/Topology/Algebra/MulAction.lean,Mathlib/Topology/Algebra/Nonarchimedean/Basic.lean,Mathlib/Topology/Algebra/ProperAction/Basic.lean,Mathlib/Topology/Algebra/ProperAction/CompactlyGenerated.lean,Mathlib/Topology/Algebra/Support.lean,Mathlib/Topology/Connected/PathConnected.lean,Mathlib/Topology/Covering/Quotient.lean |
17 |
11 |
['adomani', 'github-actions', 'grunweg'] |
grunweg assignee:grunweg |
14-27539 14 days ago |
14-27539 14 days ago |
14-27419 14 days |
| 34910 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Acyclic): a graph is a tree iff it's acyclic and has exactly `n - 1` edges |
---
This was my white whale for quite some time. Hooray!
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #34907
- [x] depends on: #34909
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
70/3 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Order/RelIso/Basic.lean |
3 |
24 |
['Rida-Hamadani', 'SnirBroshi', 'amellendijk', 'github-actions', 'jt0202', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
b-mehta assignee:b-mehta |
14-24446 14 days ago |
14-83281 14 days ago |
40-31922 40 days |
| 41618 |
joelriou author:joelriou |
chore(Order/Relseries): cleaning up a proof |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
14/45 |
Mathlib/Order/RelSeries.lean |
1 |
3 |
['chenson2018', 'github-actions'] |
nobody |
14-17563 14 days ago |
14-19315 14 days ago |
15-24239 15 days |
| 41641 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in GroupTheory |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 17 file(s) in **GroupTheory**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-group-theory
|
68/33 |
Mathlib/GroupTheory/Congruence/Hom.lean,Mathlib/GroupTheory/Coset/Defs.lean,Mathlib/GroupTheory/CosetCover.lean,Mathlib/GroupTheory/Exponent.lean,Mathlib/GroupTheory/FinitelyPresentedGroup.lean,Mathlib/GroupTheory/FreeGroup/Basic.lean,Mathlib/GroupTheory/MonoidLocalization/Lemmas.lean,Mathlib/GroupTheory/Nilpotent.lean,Mathlib/GroupTheory/NoncommPiCoprod.lean,Mathlib/GroupTheory/OreLocalization/Basic.lean,Mathlib/GroupTheory/OreLocalization/OreSet.lean,Mathlib/GroupTheory/Perm/Cycle/Type.lean,Mathlib/GroupTheory/QuotientGroup/Defs.lean,Mathlib/GroupTheory/ResiduallyFinite.lean,Mathlib/GroupTheory/SpecificGroups/Cyclic.lean,Mathlib/GroupTheory/SpecificGroups/KleinFour.lean,Mathlib/GroupTheory/Submonoid/Center.lean |
17 |
1 |
['github-actions'] |
nobody |
14-17036 14 days ago |
14-17036 14 days ago |
14-16916 14 days |
| 41426 |
gmcninch-prof author:gmcninch-prof |
Add SymmetricMap: symmetric multilinear maps |
Define `SymmetricMap R M N ι`, the type of symmetric `R`-multilinear maps
from `ι → M` to `N` (i.e. multilinear maps invariant under permutation of
their arguments).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
The code is adapted from Kenny Lau's work
[here](https://github.com/kckennylau/EllipticCurve/blob/master/EllipticCurve/ProjectiveSpace/TensorProduct/SymmetricMap.lean)
-- see [`SymmetricMap`](https://github.com/gmcninch-prof/mathlib4/blob/symmetric-power-lift/Mathlib/LinearAlgebra/TensorProduct/SymmetricMap.lean).
This PR previously also contained the universal property / `lift` for
`SymmetricPower` (relating linear maps out of `Sym[R]^n M` to symmetric
multilinear maps), but per reviewer feedback on Zulip that work has been
split into a separate PR that depends on this one.
Zulip discussion [here](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/SymmetricPower.20universal.20property/near/608532652)
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
397/0 |
Mathlib.lean,Mathlib/LinearAlgebra/TensorProduct/SymmetricMap.lean |
2 |
10 |
['github-actions', 'gmcninch-prof', 'jcommelin'] |
nobody |
13-84995 13 days ago |
13-84995 13 days ago |
15-53177 15 days |
| 41659 |
NoahW314 author:NoahW314 |
feat(Algebra/Order/GroupWithZero): generalize from `MonoidWithZero` to `MulZeroClass` |
The same proofs hold with the weaker typeclass.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
37/49 |
Mathlib/Algebra/Order/GroupWithZero/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
13-77725 13 days ago |
13-80252 13 days ago |
13-80132 13 days |
| 41308 |
sergantche author:sergantche |
feat: add `List.insertIdx_eraseIdx_getElem_perm` |
Adds `List.insertIdx_eraseIdx_getElem_perm`, showing that erasing an element by index and inserting it at any valid position gives a permutation of the original list.
This packages the existing lemmas `List.perm_insertIdx` and `List.getElem_cons_eraseIdx_perm` into a direct API lemma.
AI assistance was used in preparing this PR; I reviewed the statement and proof.
[](https://gitpod.io/from-referrer/) |
t-data
new-contributor
|
5/0 |
Mathlib/Data/List/Perm/Basic.lean |
1 |
4 |
['github-actions', 'sergantche', 'vlad902'] |
nobody |
13-74179 13 days ago |
13-77022 13 days ago |
17-80297 17 days |
| 40345 |
imalinowskip author:imalinowskip |
feat(Probability): Cramér-Wold |
|
t-measure-probability
new-contributor
|
79/0 |
Mathlib.lean,Mathlib/Probability/CramerWold.lean |
2 |
33 |
['RemyDegenne', 'felixpernegger', 'github-actions', 'imalinowskip', 'mathlib-merge-conflicts', 'wwylele'] |
RemyDegenne assignee:RemyDegenne |
13-73333 13 days ago |
19-7646 19 days ago |
40-46004 40 days |
| 39953 |
plp127 author:plp127 |
feat(RingTheory/Valuation): embedding of valuation groups |
We show that if `vR` and `vA` are valuations satisfying `vR.HasExtension vA`, then there is an induced embedding of the valuation groups compatible with the valuations and with the extension.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
39/1 |
Mathlib/Algebra/Group/WithOne/Defs.lean,Mathlib/RingTheory/Valuation/Extension.lean |
2 |
6 |
['faenuccio', 'github-actions', 'plp127', 'riccardobrasca'] |
alreadydone assignee:alreadydone |
13-67149 13 days ago |
50-24821 50 days ago |
59-60721 59 days |
| 40613 |
LLaurance author:LLaurance |
feat(Probability): expectation of a binomial random variable |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
16/1 |
Mathlib/Probability/Distributions/Binomial.lean |
1 |
1 |
['github-actions'] |
sgouezel assignee:sgouezel |
13-67148 13 days ago |
41-55379 41 days ago |
41-55259 41 days |
| 41339 |
mkaratarakis author:mkaratarakis |
feat(Tactic/ComputablePolynomial): define SparsePoly, a computable univariate polynomial |
`SparsePoly R` is a computable, kernel-reducible representation of univariate polynomials over a commutative ring `R` with `DecidableEq R`: a list of `(exponent, coefficient)` pairs with strictly decreasing exponents and nonzero coefficients, making the representation canonical. This first part defines the structure, the semantics `toPoly : SparsePoly R → Polynomial R`, and addition.
This is part 1 of a series splitting #41282 into ≤300-line PRs as requested by reviewers. The series builds up to a `CommRing` instance, an `AlgEquiv` with `Polynomial R`, division, and axiom-free reflection tactics (`poly_decide`, `poly_eval`, `poly_dvd`) whose `#print axioms` trust checks land in `MathlibTest/`.
Started by Mario Carneiro at the Hausdorff Institute (June 2024) with design notes and an original Lean prototype by James Davenport (https://github.com/JamesHDavenport/Dagstuhl23401, `verify-irred/VerifyIrred`).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
|
t-meta |
201/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/ComputablePolynomial/Basic.lean |
3 |
2 |
['github-actions'] |
thorimur assignee:thorimur |
13-67145 13 days ago |
22-42817 22 days ago |
22-43232 22 days |
| 38908 |
CBirkbeck author:CBirkbeck |
feat(NumberTheory/ModularForms): API lemmas for level-1 graded ring |
Adds API lemmas extracted from #38813 to keep that PR reviewable: `DirectSum.of_eq_of_eq`, `DirectSum.of_eq_sub_add_smul`, `ModularForm.cast_apply`, `ModularForm.mul_ne_zero`, `ModularForm.sub_smul_isCuspForm`. |
LLM-generated |
28/0 |
Mathlib/NumberTheory/ModularForms/Basic.lean,Mathlib/NumberTheory/ModularForms/CuspFormSubmodule.lean,Mathlib/NumberTheory/ModularForms/QExpansion.lean |
3 |
7 |
['CBirkbeck', 'github-actions', 'mathlib-merge-conflicts', 'riccardobrasca'] |
nobody |
13-46700 13 days ago |
13-47242 13 days ago |
13-47122 13 days |
| 38909 |
CBirkbeck author:CBirkbeck |
feat(RingTheory/MvPolynomial/WeightedHomogeneous): sub, eq_zero_of_no_monomials, eq_monomial_of_unique_weight |
Adds the general-purpose API lemmas extracted from #38813 to keep that PR reviewable: `MvPolynomial.IsWeightedHomogeneous.sub`, `MvPolynomial.eq_zero_of_no_monomials`, `MvPolynomial.eq_monomial_of_unique_weight`, `MvPolynomial.monomial_fin_two`, `MvPolynomial.support_sub_monomial_sub_monomial`, `Finsupp.weight_eq_sum`, and the Finset inequality `Finset.sum_lt_sum_of_replace` (no mathlib equivalent exists — `prod_lt_prod_of_subset`-style lemmas need `s ⊆ t`).
_Prepared by Claude._
|
LLM-generated |
86/0 |
Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/Data/Finsupp/Weight.lean,Mathlib/RingTheory/MvPolynomial/WeightedHomogeneous.lean |
5 |
5 |
['CBirkbeck', 'github-actions', 'riccardobrasca'] |
nobody |
13-44294 13 days ago |
13-47066 13 days ago |
13-46946 13 days |
| 38009 |
CBirkbeck author:CBirkbeck |
feat(RingTheory/Valuation): define the valuation spectrum and its topology |
## Summary
Define the valuation spectrum `Spv A` of a commutative ring and equip it with the topology generated by basic open sets, following Wedhorn's *Adic Spaces*. Also define the pullback (`comap`) of a `ValuativeRel` along a ring homomorphism. This is preparation for later defining adic spaces.
Note the code was generated by claude code, but I have cleaned up and pre-reviewed the work.
|
t-ring-theory
LLM-generated
|
400/0 |
Mathlib.lean,Mathlib/RingTheory/Valuation/ValuationSpectrum.lean,Mathlib/RingTheory/Valuation/ValuativeRel/Comap.lean |
3 |
70 |
['CBirkbeck', 'adamtopaz', 'chrisflav', 'dagurtomas', 'faenuccio', 'github-actions', 'jjdishere', 'riccardobrasca'] |
alreadydone assignee:alreadydone |
13-40041 13 days ago |
13-40574 13 days ago |
98-14165 98 days |
| 41640 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in GroupTheory.GroupAction |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 6 file(s) in **GroupTheory.GroupAction**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-group-theory
|
50/28 |
Mathlib/GroupTheory/GroupAction/Blocks.lean,Mathlib/GroupTheory/GroupAction/FixingSubgroup.lean,Mathlib/GroupTheory/GroupAction/Hom.lean,Mathlib/GroupTheory/GroupAction/MultipleTransitivity.lean,Mathlib/GroupTheory/GroupAction/Pointwise.lean,Mathlib/GroupTheory/GroupAction/SubMulAction.lean |
6 |
1 |
['github-actions'] |
nobody |
13-37139 13 days ago |
14-17740 14 days ago |
14-17620 14 days |
| 41644 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Algebra (BigOperators, Order, ...) |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 16 file(s) in **Algebra (BigOperators, Order, ...)**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated |
68/40 |
Mathlib/Algebra/BigOperators/Group/Finset/Basic.lean,Mathlib/Algebra/BigOperators/Group/Finset/Defs.lean,Mathlib/Algebra/BigOperators/Group/Finset/Piecewise.lean,Mathlib/Algebra/BigOperators/Group/Finset/Sigma.lean,Mathlib/Algebra/FreeMonoid/Basic.lean,Mathlib/Algebra/Module/PUnit.lean,Mathlib/Algebra/MonoidAlgebra/Module.lean,Mathlib/Algebra/Order/Antidiag/Prod.lean,Mathlib/Algebra/Order/Group/Finset.lean,Mathlib/Algebra/Order/Group/Unbundled/Basic.lean,Mathlib/Algebra/Order/Hom/Monoid.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Pow.lean,Mathlib/Algebra/Regular/Basic.lean,Mathlib/Algebra/Torsor/Basic.lean,Mathlib/Order/Filter/AtTopBot/Monoid.lean |
16 |
1 |
['github-actions'] |
nobody |
13-26337 13 days ago |
13-29004 13 days ago |
13-28884 13 days |
| 39212 |
emlis42 author:emlis42 |
feat(Algebra/ContinuedFractions): add `partNums!` and `partDens!` |
This PR adds `partNums!` and `partDens!`, which provide infinite stream representations for the sequences of partial numerators and denominators of a generalized continued fraction. |
t-algebra
new-contributor
label:t-algebra$ |
66/35 |
Mathlib/Algebra/ContinuedFractions/Basic.lean,Mathlib/Algebra/ContinuedFractions/ContinuantsRecurrence.lean,Mathlib/Algebra/ContinuedFractions/Determinant.lean,Mathlib/Algebra/ContinuedFractions/Translations.lean |
4 |
4 |
['emlis42', 'github-actions', 'grunweg'] |
joelriou assignee:joelriou |
13-25879 13 days ago |
76-8630 76 days ago |
76-8510 76 days |
| 38214 |
emlis42 author:emlis42 |
feat(Algebra/ContinuedFractions): add Euler's continued fraction |
This PR formalizes Euler continued fractions by providing `euler` which construct one by giving head term and coefficients with some basic property.
We also introduce a transformation `GenContFract.toEuler` that maps a generalized continued fraction `g : GenContFract K` to an equivalent Euler continued fraction. |
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
364/0 |
Mathlib.lean,Mathlib/Algebra/ContinuedFractions/Euler.lean |
2 |
74 |
['YaelDillies', 'emlis42', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
13-25229 13 days ago |
19-8563 19 days ago |
81-58926 81 days |
| 41645 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Combinatorics and Dynamics |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 5 file(s) in **Combinatorics and Dynamics**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated |
22/9 |
Mathlib/Combinatorics/Additive/FreimanHom.lean,Mathlib/Combinatorics/Hindman.lean,Mathlib/Combinatorics/SimpleGraph/Cayley.lean,Mathlib/Data/Finset/NoncommProd.lean,Mathlib/Dynamics/SymbolicDynamics/Basic.lean |
5 |
3 |
['b-mehta', 'github-actions'] |
nobody |
13-13693 13 days ago |
13-17461 13 days ago |
13-19182 13 days |
| 40692 |
pechersky author:pechersky |
feat(GroupTheory/Finite): torsion free and FG WithOne M is when M is |
Couldn't find a better place for these
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [ ] depends on #40690 |
t-group-theory |
62/3 |
Mathlib/Algebra/Group/Hom/Defs.lean,Mathlib/Algebra/Group/Nat/Hom.lean,Mathlib/Algebra/Group/WithOne/Basic.lean,Mathlib/GroupTheory/MonoidLocalization/Finite.lean |
4 |
2 |
['github-actions'] |
nobody |
12-85788 12 days ago |
13-2871 13 days ago |
13-7437 13 days |
| 41647 |
adomani author:adomani |
chore: add missing `to_additive` docstrings (Normed, TransferInstance) |
Split out of #41642. These three additive doc-strings need closer review than a mechanical translation:
- `Analysis/Normed/Group/Constructions.lean` — `Prod.nnnorm_def'`/`Prod.nnnorm_mk'` (primed↔unprimed naming with `to_additive`; needs double-checking).
- `Analysis/Normed/Group/Continuity.lean` — `comap_norm_nhdsGT_zero'` (freshly worded additive doc-string).
- `Topology/Algebra/Module/TransferInstance.lean` — `ContinuousMulEquiv.isTopologicalGroup` (the pre-existing multiplicative doc-string already reads as additive — likely needs fixing on both sides).
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
t-topology
LLM-generated
|
9/5 |
Mathlib/Analysis/Normed/Group/Constructions.lean,Mathlib/Analysis/Normed/Group/Continuity.lean,Mathlib/Topology/Algebra/Module/TransferInstance.lean |
3 |
10 |
['adomani', 'github-actions', 'grunweg'] |
grunweg assignee:grunweg |
12-81530 12 days ago |
12-81530 12 days ago |
13-73101 13 days |
| 41597 |
NoahW314 author:NoahW314 |
feat(Data/Finset/Card): add `Finset.card_le_card_of_surjective` |
This is modeled on the corresponding lemma `Finset.card_le_card_of_injective`, which already exists.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
9/0 |
Mathlib/Data/Finset/Card.lean |
1 |
2 |
['github-actions', 'themathqueen'] |
nobody |
12-80313 12 days ago |
16-4329 16 days ago |
16-4209 16 days |
| 41654 |
adomani author:adomani |
chore: rename `QuotientAddGroup.mk_out_eq_mul` to `mk_out_eq_add` |
The additive lemma states `(mk g).out = g + h`, so by the `to_additive` naming convention its name should end in `add`, not `mul`. Renames it to `QuotientAddGroup.mk_out_eq_add` (a copy-paste error inherited from mathlib3) and deprecates the old name. |
LLM-generated
t-group-theory
|
4/1 |
Mathlib/GroupTheory/Coset/Defs.lean |
1 |
2 |
['adomani', 'github-actions'] |
nobody |
12-78913 12 days ago |
12-81296 12 days ago |
12-82734 12 days |
| 40689 |
pechersky author:pechersky |
feat(Algebra/Group/WithOne): isFooCancel when source is |
requires that source has no idempotent elements
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
37/0 |
Mathlib/Algebra/Group/WithOne/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
12-78785 12 days ago |
39-60537 39 days ago |
39-60428 39 days |
| 41710 |
WenrongZou author:WenrongZou |
feat(FormalGroup): generalize the definition of `FormalGroup.Point` |
This PR generalizes the definition of the point of formal group. This will fit into more cases of applications.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
120/75 |
Mathlib/RingTheory/FormalGroup/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
12-77528 12 days ago |
12-78613 12 days ago |
12-78493 12 days |
| 41637 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Algebra/Group core and subobjects |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 13 file(s) in **Algebra/Group core and subobjects**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-algebra
label:t-algebra$ |
70/24 |
Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Center.lean,Mathlib/Algebra/Group/Commute/Defs.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/Algebra/Group/Subgroup/Basic.lean,Mathlib/Algebra/Group/Subgroup/Ker.lean,Mathlib/Algebra/Group/Subgroup/MulOppositeLemmas.lean,Mathlib/Algebra/Group/Submonoid/Membership.lean,Mathlib/Algebra/Group/Submonoid/MulAction.lean,Mathlib/Algebra/Group/Subsemigroup/Membership.lean,Mathlib/Algebra/Group/Torsion.lean,Mathlib/Algebra/Group/UniqueProds/Basic.lean |
13 |
11 |
['adomani', 'artie2000', 'github-actions'] |
nobody |
12-77056 12 days ago |
14-29132 14 days ago |
14-29012 14 days |
| 41636 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in Algebra/Group actions and homs |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 7 file(s) in **Algebra/Group actions and homs**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-algebra
label:t-algebra$ |
60/21 |
Mathlib/Algebra/Group/Action/Defs.lean,Mathlib/Algebra/Group/Action/Faithful.lean,Mathlib/Algebra/Group/Action/Hom.lean,Mathlib/Algebra/Group/Action/Units.lean,Mathlib/Algebra/Group/Equiv/Defs.lean,Mathlib/Algebra/Group/Hom/Defs.lean,Mathlib/Algebra/Group/Units/Hom.lean |
7 |
14 |
['JovanGerb', 'adomani', 'artie2000', 'github-actions'] |
nobody |
12-76745 12 days ago |
13-29590 13 days ago |
14-29336 14 days |
| 38848 |
jcreinhold author:jcreinhold |
feat(AlgebraicTopology/SimplicialSet): exists_isPushout_of_ne_top |
Every proper subcomplex of a simplicial set extends by attaching a single cell along its boundary, exhibited as a pushout of `∂Δ[n] ↪ Δ[n]`. This is the per-cell input for cell-by-cell filtrations of monomorphisms in `SSet`.
Adapted from @joelriou 's [proof](https://github.com/joelriou/topcat-model-category/blob/813338a8c88cfe0096deed7e3ba7daf92d4a1c71/TopCatModelCategory/SSet/Boundary.lean#L187). I also added the supporting lemma `Types.isPullback_of_eq_setPreimage` (set-preimage square is a pullback in `Type u`).
AI use: Claude helped locate `subtype_val_mono` and the `backward.isDefEq.respectTransparency` option.
|
t-algebraic-topology
new-contributor
|
117/3 |
Mathlib/AlgebraicTopology/SimplicialSet/Boundary.lean,Mathlib/CategoryTheory/Limits/Types/Pullbacks.lean |
2 |
37 |
['dagurtomas', 'github-actions', 'jcreinhold', 'joelriou', 'mckoen'] |
mattrobball assignee:mattrobball |
12-67147 12 days ago |
38-13806 38 days ago |
83-64003 83 days |
| 39078 |
fpvandoorn author:fpvandoorn |
feat: add lemmas about products over Finset.Iio |
* Mostly useful for `ℕ`
* I added the `Finset.Iic` lemmas by symmetry, but I'm happy to remove them if we think they are redundant.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
29/0 |
Mathlib/Algebra/Order/BigOperators/Group/LocallyFinite.lean |
1 |
1 |
['github-actions'] |
joelriou assignee:joelriou |
12-67146 12 days ago |
79-24094 79 days ago |
79-23974 79 days |
| 41713 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Finite): the `Fintype` instance for `incidenceSet` doesn't need `DecidableEq` |
Now it only requires `Fintype (G.neighborSet v)`.
This caused `incidenceFinset` and theorems about it to complain that `DecidableEq` is unused, so I changed `incidenceFinset` to require `Fintype (G.incidenceSet v)` and fixed the theorems. Theorems that require a finite `neighborSet` can avoid this.
---
The theorem below it also doesn't need `DecidableEq` anymore.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/10 |
Mathlib/Combinatorics/SimpleGraph/Finite.lean |
1 |
1 |
['github-actions'] |
nobody |
12-60358 12 days ago |
12-60932 12 days ago |
12-61347 12 days |
| 41668 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Decomp): `dropUntil` API to match existing `takeUntil` API |
---
Slightly more complicated theorems than usual "API" though.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
56/9 |
Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean |
1 |
1 |
['github-actions'] |
nobody |
12-55809 12 days ago |
12-56377 12 days ago |
13-60547 13 days |
| 41435 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Hamiltonian): a graph with a Hamiltonian path is connected |
and other small Hamiltonian lemmas.
---
The new public import is needed because `Nat.card` was previously only imported privately.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
87/18 |
Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean |
1 |
1 |
['github-actions'] |
nobody |
12-43153 12 days ago |
17-43880 17 days ago |
19-62219 19 days |
| 41722 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Connectivity/Subgraph): `mapToSubgraph` API |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
36/0 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean |
1 |
1 |
['github-actions'] |
nobody |
12-41722 12 days ago |
12-42328 12 days ago |
12-42208 12 days |
| 41082 |
wrenna-robson author:wrenna-robson |
feat(Logic/Function/Defs): add `Function.diag` |
Adds a name for the function `fun x => (x, x)`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
82/50 |
Mathlib/Data/Finset/Prod.lean,Mathlib/Data/Int/Cast/Prod.lean,Mathlib/Data/Nat/Cast/Prod.lean,Mathlib/Data/Set/Prod.lean,Mathlib/Logic/Function/Defs.lean,Mathlib/MeasureTheory/MeasurableSpace/Constructions.lean,Mathlib/NumberTheory/Height/Basic.lean,Mathlib/Order/Filter/Prod.lean,Mathlib/Probability/Independence/Conditional.lean,Mathlib/Probability/Kernel/Basic.lean,Mathlib/Probability/Kernel/Composition/MeasureComp.lean,Mathlib/Probability/Kernel/Composition/MeasureCompProd.lean,Mathlib/Probability/Kernel/Condexp.lean,Mathlib/Probability/Kernel/Deterministic.lean,Mathlib/Probability/Moments/SubGaussian.lean,Mathlib/Topology/Algebra/ProperAction/Basic.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Constructions/SumProd.lean,Mathlib/Topology/UniformSpace/UniformConvergence.lean |
19 |
31 |
['github-actions', 'themathqueen', 'wrenna-robson'] |
nobody |
12-33896 12 days ago |
12-37154 12 days ago |
25-26724 25 days |
| 28686 |
mitchell-horner author:mitchell-horner |
feat(Combinatorics/SimpleGraph): prove the Erdős-Stone theorem |
Proves the Erdős-Stone theorem:
If `G` has at least `(1 - 1 / r + o(1)) * n ^ 2 / 2` many edges, then `G` contains a copy of a `completeEquipartiteGraph (r + 1) t`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #28685
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
|
205/1 |
Mathlib/Combinatorics/SimpleGraph/Extremal/ErdosStoneSimonovits.lean |
1 |
8 |
['barni120400', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'mitchell-horner'] |
nobody |
12-27441 12 days ago |
23-20334 23 days ago |
23-29293 23 days |
| 41709 |
metakunt author:metakunt |
feat(Data/Multiset): change definition of Multiset.Pairwise |
Currently the definition of Multiset.Pairwise seems not right to me. For my project I need to get a decidable instance for a Finset.Pairwise, but the current definition doesn't seem correct and it can't even give me a decidable instance of Pairwise. |
t-data
large-import
|
71/60 |
Mathlib/Data/Finsupp/BigOperators.lean,Mathlib/Data/Fintype/List.lean,Mathlib/Data/Multiset/Bind.lean,Mathlib/Data/Multiset/Defs.lean,Mathlib/Data/Multiset/Pairwise.lean,Mathlib/Data/Multiset/Replicate.lean,Mathlib/Data/Multiset/ZeroCons.lean,Mathlib/Logic/Relation.lean |
8 |
13 |
['SnirBroshi', 'github-actions', 'metakunt'] |
nobody |
12-19767 12 days ago |
12-19767 12 days ago |
12-19658 12 days |
| 40741 |
AntoineduFresne author:AntoineduFresne |
feat(order): dilworth's and mirsky's theorems for finite orders |
I add Dilworth's theorem and its order dual, Mirsky's theorem, for finite subsets of a partial order, together with the order-theoretic lemmas they rest on.
A prior external formalization by Vlad Tsyrklevich is linked from `1000.yaml`; this is an independent `Finset`-based development using Galvin's proof, and I agreed the `1000.yaml` update with him.
I split the min-max content, as for Hall's marriage theorem, into a weak-duality inequality and a strong-duality existence of a matching pair, so I never define an extremal quantity over families of sets (no `Finset.min'` / `Finset.max'`):
- `dilworth` / `mirsky` — an antichain and a chain cover (resp. a chain and an antichain cover) of equal size;
- `antichain_le_chain_cover` / `chain_le_antichain_cover` — the weak-duality inequalities, for an arbitrary relation;
- `dilworth_partition` / `mirsky_partition` — the same with a pairwise-disjoint partition.
For Dilworth I use Galvin's induction (gluing step `chainCover_glue`); I avoid the König /
bipartite-matching route since König isn't in Mathlib yet (at least last time I checked). I prove Mirsky directly (peeling off minimal elements) rather than via `OrderDual`, since the direct induction seems simpler to me and the two proofs already share their foundations (the closure lemmas and the injective weak dualities).
Internally I work with an injection `f : α → Finset α` on the antichain rather than with the
`Finset (Finset α)` cover directly, so distinctness of the chains comes from the antichain property instead of a separate bookkeeping.
## Questions I'd like input on
1. Explicit min-max? I give weak duality plus a matching pair, from which "largest antichain = smallest chain cover" follows; I do not state that equality as a single theorem (doing so would, I think, mean defining the extremal quantities I wanted to avoid). Would you also like an explicit min-max statement?
2. Two layers of weak duality. I expose it twice: an injective form (`IsAntichain.exists_injOn_mem_chains`, over an arbitrary relation and an arbitrary index type, no finiteness) and a `Finset` cardinality form (`antichain_le_chain_cover`), the latter a one-line specialization of the former. I'm not sure whether exposing both is right, or whether one of them should be canonical. And is there appetite to push the general core to an `ℕ∞` / infinite version, or is the finite form the right scope here?
3. `[DecidableEq α]` on the main theorems. It comes only from writing the cover as
`s = 𝒞.biUnion id` (`Finset.biUnion` needs it); a membership-form coverage condition such as `∀ x, x ∈ s ↔ ∃ C ∈ 𝒞, x ∈ C` would drop the assumption, though it seems to me a bit less readable. Which do you prefer? (I think the injective-form weak dualities assume neither order, finiteness, nor `DecidableEq`.)
4. Naming. I use `C` / `A` for a chain / antichain and `𝒞` / `𝒜` for a chain / antichain cover (for hopefully obvious reason). Happy to change these if you would prefer something else.
## Open questions
- File placement (`Mathlib/Order/Dilworth.lean`?), and whether the general lemmas (the antichain closures, the injective transversal and weak dualities) should live in existing files (`Mathlib/Order/Antichain.lean`, `Mathlib/Order/UpperLower/…`) rather than in a new file.
Zulip: https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Antoine.20du.20Fresne.20von.20Hohenesche/with/604112426
AI use: I worked out all proofs on paper first and most of the design structure of the file. I then used Claude Code (Claude Opus) to transcribe my paper proofs into Lean, weaken hypotheses, reduce redundancy, and fix comment typos. |
t-order
new-contributor
LLM-generated
|
610/3 |
Mathlib.lean,Mathlib/Order/Dilworth.lean,docs/1000.yaml |
3 |
6 |
['AntoineduFresne', 'SnirBroshi', 'github-actions'] |
nobody |
12-16402 12 days ago |
38-45125 38 days ago |
38-46167 38 days |
| 41737 |
jjdishere author:jjdishere |
feat(CategoryTheory/AB5): AB5 instance of Ab with universe variables |
When u <= v <= w, we show `AB5OfSize.{u, v} Ab.{w}`.
(Only `AB5OfSize.{u, u + 1} Ab.{u + 1}` is need in my further application.)
Co-authored-by: @chrisflav
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
13/1 |
Mathlib/Algebra/Category/Grp/AB.lean |
1 |
1 |
['github-actions'] |
nobody |
12-16224 12 days ago |
12-16800 12 days ago |
12-16680 12 days |
| 39607 |
TentativeConvert author:TentativeConvert |
feat(Algebra/DirectSum): equivalence between direct sum indexed by ι₁ and double sum indexed by ι₂ and fibres of f : ι₁ → ι₂ |
1. Add variant `equivCongrLeft'` of `equivCongrLeft`, and corresponding `…_apply` lemma.
2. Add `…_of lemmas` for both `equivCongrLeft` and `equivCongrLeft'`.
3. Add `…of lemma` for `sigmaCurry`, i.e. `sigmaCurry_of`.
4. Add `sigmaFiberAddEquiv`: the equivalence between a direct sum indexed by a type `ι₁` and the double sum indexed by a type `ι₂` and the fibres of a map `f : ι₁ → ι₂`. Add two `…_apply` lemmas and an `…_of` lemma.
---
This is supposed to be a first step towards merging the draft PR #39356.
re 1: Mathematically, I don't see why one version should be preferred over the other, but I found the existing `equivCongrLeft` more difficult to work with when the equivalence `h : ι ≃ κ` is naturally given in the opposite direction. (I could not avoid explicit type casts through the equality `h.symm.symm = h` when defining `sigmaFiberAddEquiv` in terms of `equivCongrLeft`.)
Very unsure about the name of `equivCongrLeft'`. (I see that the name `equivCongrLeft` was chosen in analogy with `Equiv.piCongrLeft`. `Equiv.piCongrRight` looks very different, so presumably `equivCongrLeft'` should *not* be called `equivCongrRight`.)
re 4: Very unsure about the naming of the two different `…_apply` lemmas; called them `…_apply` and `…_apply'` for now. The second (`…_apply'`) cannot be a `simp` lemma as it would prevent the first (`…_apply`) from firing.
I've used Claude Opus for understanding error messages and git interaction, but everything is hand coded.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
maintainer-merge
label:t-algebra$ |
46/3 |
Mathlib/Algebra/DirectSum/Basic.lean |
1 |
48 |
['TentativeConvert', 'eric-wieser', 'github-actions', 'joneugster', 'themathqueen'] |
joneugster assignee:joneugster |
12-14362 12 days ago |
12-16344 12 days ago |
66-24928 66 days |
| 41415 |
tb65536 author:tb65536 |
feat(FieldTheory/AbsoluteGaloisGroup): functoriality of `absoluteGaloisGroup` |
This PR proves functionality of `absoluteGaloisGroup`.
Upstreamed from FLT.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41416
- [x] depends on: #41417
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
FLT
label:t-algebra$ |
49/1 |
Mathlib/FieldTheory/AbsoluteGaloisGroup.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
12-10680 12 days ago |
12-15050 12 days ago |
12-14932 12 days |
| 41743 |
themathqueen author:themathqueen |
chore: move `ContinuousLinearMap.extend` from `Analysis` to `Topology` |
According to #29888, the original definition was by Zhouhang Zhou in 2019, so I adjusted the copyright to that year.
No code is altered besides adding `public` and `@[expose]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
74/61 |
Mathlib.lean,Mathlib/Analysis/Normed/Operator/Extend.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Extend.lean |
3 |
1 |
['github-actions'] |
nobody |
12-9526 12 days ago |
12-10533 12 days ago |
12-10815 12 days |
| 28246 |
Sebi-Kumar author:Sebi-Kumar |
feat(AlgebraicTopology/FundamentalGroupoid): the n-sphere is simply connected for n > 1 |
Prove that the `n`-dimensional sphere (i.e., the unit sphere centered at the origin in `(n + 1)`-dimensional real Euclidean space) is a simply connected space for `n > 1`. This proof follows Hatcher's "Algebraic Topology"; we first prove a general lemma about decomposing loops and then exploit the fact that non-surjective loops in the sphere are homotopically trivial.
Note: To get this file to build, I edited `Mathlib/Tactic/Linter/DirectoryDependency.lean` to remove the restrictions on AlgebraicTopology files importing Geometry, NumberTheory, and FieldTheory files. Thank you to those who shared their expertise [here](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Warning.20that.20AlgebraicTopology.20can't.20import.20SetTheory/with/533833638). As I understand it, this is just a short-term solution, so I would appreciate feedback on what to do about this situation.
Note: I am unsure where exactly the file `SimplyConnectedSphere.lean` should go or whether that is an appropriate name for the file, so feedback there would be appreciated.
---
To provide additional context, this code was written as a part of the Fields Undergraduate Summer Research Program at the University of Western Ontario under the supervision of Chris Kapulkin and Daniel Carranza.
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #28208
- [x] depends on: #28198
- [x] depends on: #28185
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
new-contributor
|
371/3 |
Mathlib.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/SimplyConnectedSphere.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/VanKampen.lean,Mathlib/Logic/Equiv/PartialEquiv.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean,Mathlib/Topology/Path.lean |
6 |
19 |
['Sebi-Kumar', 'dagurtomas', 'github-actions', 'mathlib4-dependent-issues-bot', 'mathlib4-merge-conflict-bot', 'robin-carlier'] |
robin-carlier assignee:robin-carlier |
12-3575 12 days ago |
12-3575 12 days ago |
25-81721 25 days |
| 40151 |
TJHeeringa author:TJHeeringa |
feat(Topology/Algebra): add ContinuousLinearMap.fromCompletion |
`Uniform.Completion.extension` maps a map $f:\alpha\to\beta$ to $f:\text{Completion }\alpha \to \beta$. There are theorems that show that this operations preserves continuous, uniformly, continuous and LipschitzWith, but not linearity. This adds that theorem.
---
Asked at [#Is there code for X? > Theorem for Completion.extension preserving linearity](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Theorem.20for.20Completion.2Eextension.20preserving.20linearity/with/599463628) whether it exists. No response given.
I placed it in other parts about extensions, but I needed to add an (flagged as costly) import for making this work. Hence, I am not sure I added it in the right spot.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
45/5 |
Mathlib/Topology/Algebra/LinearMapCompletion.lean |
1 |
23 |
['TJHeeringa', 'github-actions', 'j-loreaux', 'themathqueen'] |
sgouezel assignee:sgouezel |
11-83876 11 days ago |
21-26636 21 days ago |
44-9104 44 days |
| 40857 |
BryceT233 author:BryceT233 |
feat(RingTheory/Radical): radical of principal ideals in a UFD |
This PR resolves the "TODO" in `RingTheory/Radical/Basic.lean` by connecting `UniqueFactorizationMonoid.radical` with `Ideal.radical`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
large-import
|
44/4 |
Mathlib/RingTheory/Radical/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
11-73224 11 days ago |
35-55551 35 days ago |
35-55431 35 days |
| 38018 |
matthewjasper author:matthewjasper |
feat(Algebra): expand Subalgebra.restrictScalars API |
Add an instance for the original algebra structure, the implied scalar tower instances, and the algebra equivalence with the original subalgebra. Use this to remove some `set_option backward.isDefEq.respectTransparency`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
|
61/15 |
Mathlib/Algebra/Algebra/Subalgebra/Tower.lean,Mathlib/RingTheory/AlgebraicIndependent/TranscendenceBasis.lean,Mathlib/RingTheory/Finiteness/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean |
4 |
15 |
['eric-wieser', 'github-actions', 'kbuzzard', 'leanprover-radar', 'mariainesdff', 'mathlib-merge-conflicts', 'matthewjasper'] |
mariainesdff assignee:mariainesdff |
11-72651 11 days ago |
11-74574 11 days ago |
86-40332 86 days |
| 37603 |
Parcly-Taxel author:Parcly-Taxel |
refactor: review of `SetSemiring` |
* Rename `Set.up` and `SetSemiring.down` to `SetSemiring.ofSet` and `SetSemiring.toSet` respectively. Unprotect both and make them equivalences, following `FreeMonoid`.
* Derive `CompleteAtomicBooleanAlgebra` for `SetSemiring` immediately.
* Add `imageHom_id` and `imageHom_comp`. The three existing lemmas about `imageHom` are coalesced into `imageHom_apply`.
Ultimately inspired by https://github.com/leanprover-community/mathlib4/pull/36934#issuecomment-4183475568. |
t-data |
119/164 |
Mathlib/Algebra/Algebra/Operations.lean,Mathlib/Data/Set/Semiring.lean |
2 |
45 |
['Parcly-Taxel', 'YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'ocfnash', 'sgouezel'] |
nobody |
11-67287 11 days ago |
11-69267 11 days ago |
47-79931 47 days |
| 30109 |
scholzhannah author:scholzhannah |
feat: the subcomplexes of a (relative classical) CW complex form a completely distributive lattice |
In this PR we prove that the space of subcomplexes `Subcomplex C` of a (relative classical) CW complex `C` is a `CompletelyDistribLattice`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
313/0 |
Mathlib/Topology/CWComplex/Classical/Subcomplex.lean |
1 |
28 |
['ADedecker', 'github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'scholzhannah'] |
urkud assignee:urkud |
11-67150 11 days ago |
41-37757 41 days ago |
98-35886 98 days |
| 39588 |
jvanwinden author:jvanwinden |
feat(MeasureTheory/Measure/ProbabilityMeasure): add toProbabilityMeasure and basic API |
Introduces `Measure.toProbabilityMeasure`, which converts a `Measure` into a `ProbabilityMeasure` in the presence of the typeclass assumption `[IsProbabilityMeasure]`. Some basic API is added for the interaction between `toProbabilityMeasure` and the coercion from `ProbabilityMeasure` to `Measure`. The main convenience is that the new method allows for dot notation on `Measure`.
This PR arose from the following situation: I needed to prove equality of two `Measure` objects, and I wanted to do this by using uniqueness of limits. But the topology of weak convergence is only defined on `ProbabilityMeasure` and not on `Measure`. With the new lemma `toProbabilityMeasure_inj`, an equality of measures can easily be rewritten into an equality of the corresponding probability measures, after which `tendsto_nhds_unique` can be applied.
Aside from this, `toProbabilityMeasure` has the potential to simplify theorem statements about `Measure` objects which use the topology of weak convergence either in the assumptions or the conclusion. For example, now one can simply write `Tendsto μ.toProbabilityMeasure f (nhds μ_lim.toProbabilityMeasure)` when appropriate `[IsProbabilityMeasure]` assumptions are present.
This PR is intended as a starting point for a discussion. I only added some basic API, but perhaps more lemmas should be added (which ones?). Also, a similar definition could be made for `FiniteMeasure`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
20/2 |
Mathlib/MeasureTheory/Measure/ProbabilityMeasure.lean |
1 |
2 |
['EtienneC30', 'github-actions'] |
EtienneC30 assignee:EtienneC30 |
11-67148 11 days ago |
68-827 68 days ago |
68-707 68 days |
| 40013 |
WilliamCoram author:WilliamCoram |
feat: define bounded sets and power bounded elements |
We define bounded sets, so that we can define power bounded elements in a topological ring. Using this we generalise some notions of topoligcally nilpotent elements and define a residue field.
AI usage: some proofs were initially generated with Claude code before being cleaned and/or rewritten by hand.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
LLM-generated
large-import
|
431/5 |
Mathlib.lean,Mathlib/Topology/Algebra/Bounded.lean,Mathlib/Topology/Algebra/PowerBounded.lean,Mathlib/Topology/Algebra/TopologicallyNilpotent.lean |
4 |
12 |
['ADedecker', 'WilliamCoram', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp', 'wwylele'] |
mcdoll assignee:mcdoll |
11-67147 11 days ago |
34-17291 34 days ago |
49-85698 49 days |
| 41524 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Trails): in a preconnected Eulerian graph there exists an Eulerian circuit from any vertex |
This lets us take a circuit at a specific vertex, much like [`IsHamiltonian.exists_isHamiltonianCycle`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Combinatorics/SimpleGraph/Hamiltonian.html#SimpleGraph.IsHamiltonian.exists_isHamiltonianCycle) in Hamiltonian graphs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
23/1 |
Mathlib/Combinatorics/SimpleGraph/Trails.lean |
1 |
4 |
['SnirBroshi', 'github-actions', 'vlad902'] |
nobody |
11-66421 11 days ago |
17-52429 17 days ago |
17-52309 17 days |
| 38871 |
0xTerencePrime author:0xTerencePrime |
feat(Combinatorics/SimpleGraph): add parity lemmas for outer and inner vertices |
Adds three lemmas to `SimpleGraph.DegreeSum`:
- `sum_degrees_option_zmod_two`: the handshaking lemma for `Option I` over ZMod 2
- `degree_none_zmod_two_eq_sum`: simp-normal form of the above
- `card_degree_one_option_eq_outer_zmod_two`: under degree bound ≤ 2, count of degree-1 inner vertices equals outer vertex degree mod 2 |
t-combinatorics
new-contributor
|
65/3 |
Mathlib/Combinatorics/SimpleGraph/DegreeSum.lean |
1 |
6 |
['0xTerencePrime', 'SnirBroshi', 'github-actions'] |
nobody |
11-66246 11 days ago |
84-23931 84 days ago |
84-23811 84 days |
| 41736 |
pechersky author:pechersky |
feat: generalize SMul instances from DistribMulAction to DistribSMul |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
Affected types:
- `M →SL[σ₁₂] M₂` (semilinear maps)
- `ContinuousMultilinearMap 𝕜 E G`
- `FreeLieAlgebra R X`
- `𝓓^{n}_{K}(E, F)` (compactly supported smooth functions)
- `𝓓^{n}(Ω, F)` (test functions)
---
Discovered while working on #40785.
Used GPT 5.6 Terra to classify hunks from the originating PR and do the cherry-pick operations. |
t-analysis |
72/15 |
Mathlib/Algebra/Lie/Free.lean,Mathlib/Analysis/Distribution/ContDiffMapSupportedIn.lean,Mathlib/Analysis/Distribution/TestFunction.lean,Mathlib/Analysis/Normed/Module/Multilinear/Basic.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
5 |
1 |
['github-actions'] |
nobody |
11-64507 11 days ago |
12-16879 12 days ago |
12-16759 12 days |
| 38816 |
tb65536 author:tb65536 |
refactor(GroupTheory/Finiteness): make duplicate definitions into abbrevs |
The definitions `Submonoid.FG`, `Group.FG`, and `Subgroup.FG` are all equivalent to `Monoid.FG`, so I've made them into abbrevs. In the future we might even want to consider deprecating all but one to avoid having four ways to write the same thing.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
140/115 |
Mathlib/Algebra/AffineMonoid/Irreducible.lean,Mathlib/GroupTheory/Finiteness.lean,Mathlib/GroupTheory/MonoidLocalization/Finite.lean,Mathlib/GroupTheory/Schreier.lean,Mathlib/ModelTheory/Arithmetic/Presburger/Semilinear/Basic.lean,Mathlib/ModelTheory/Arithmetic/Presburger/Semilinear/Defs.lean,Mathlib/RingTheory/FiniteType.lean,Mathlib/RingTheory/Finiteness/Defs.lean,Mathlib/RingTheory/Localization/InvSubmonoid.lean |
9 |
11 |
['eric-wieser', 'github-actions', 'j-loreaux', 'leanprover-radar', 'mathlib-merge-conflicts', 'riccardobrasca', 'tb65536'] |
riccardobrasca assignee:riccardobrasca |
11-63337 11 days ago |
11-65107 11 days ago |
85-75599 85 days |
| 35812 |
khwilson author:khwilson |
feat(MeasureTheory/Group/GeometryOfNumbers): successive minima and existence of a directional basis |
Define the successive minima of a discrete subgroup of a real vector space with respect to a convex set. These invariants show up throughout the geometry of numbers and are the focus of Minkowski's Second Theorem (whose statement is left here with a `proof_wanted`).
Note: The key lemma is that the "gauge set" of the convex set is closed. I took the approach of showing that it is sequentially closed. There's an alternative approach via showing it's the union of a finite number of closed sets. I personally thought this approach was more intuitive, but the union approach may result in a slightly shorter proof.
Co-authored-by: Yaël Dillies <yael.dillies@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [x] depends on: #xyz [optional extra text]
-->
- [x] depends on #37738
- [x] depends on #37740
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-measure-probability
|
350/36 |
Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Analysis/Convex/Basic.lean,Mathlib/Analysis/Convex/Body.lean,Mathlib/Analysis/Convex/Gauge.lean,Mathlib/LinearAlgebra/FiniteDimensional/Basic.lean,Mathlib/MeasureTheory/Group/GeometryOfNumbers.lean,Mathlib/NumberTheory/NumberField/Units/Regulator.lean |
7 |
98 |
['Vierkantor', 'YaelDillies', 'github-actions', 'joneugster', 'khwilson', 'mathlib-merge-conflicts', 'ocfnash', 'sgouezel'] |
nobody |
11-62485 11 days ago |
17-1902 17 days ago |
79-77234 79 days |
| 40700 |
YaelDillies author:YaelDillies |
feat(FieldTheory): generalise `Separable.of_algHom` |
From BrauerGroup
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
12/19 |
Mathlib/FieldTheory/Separable.lean |
1 |
3 |
['Multramate', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
11-43483 11 days ago |
11-44428 11 days ago |
39-13523 39 days |
| 41596 |
teorth author:teorth |
feat(Archive/RiemannStieltjes): archived version of the Riemann-Stieltjes and Riemann integrals |
Construction of the Riemann and Riemann-Stieltjes integrals, based on the BoxIntegral API. These notions are weaker than the Bochner and vector-valued integrals already in Mathlib, so after the discussion in #41108 and https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/What.20to.20do.20with.20weak.20but.20standard.20math.2C.20e.2Eg.2E.20Riemann.20integ.3F , the basic definitions are being PR'ed to Archive rather than Mathlib.
---
The code was primarily human-generated, but AI was used to review the submission.
- [ ] depends on: #41592
[](https://gitpod.io/from-referrer/)
|
t-analysis |
546/3 |
Archive.lean,Archive/RiemannStieltjes.lean,Mathlib/Analysis/BoxIntegral/Basic.lean,Mathlib/Analysis/BoxIntegral/Partition/Additive.lean |
4 |
2 |
['github-actions', 'madvorak', 'mathlib-dependent-issues'] |
nobody |
11-40034 11 days ago |
13-32450 13 days ago |
13-34795 13 days |
| 40040 |
JovanGerb author:JovanGerb |
chore(Order/Bounds/Basic): add missing `to_dual` tags |
This PR adds some `to_dual` tags that weren't added in #35208
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
43/68 |
Mathlib/Order/Bounds/Basic.lean |
1 |
1 |
['github-actions', 'madvorak', 'vihdzp'] |
nobody |
11-38953 11 days ago |
57-32130 57 days ago |
57-32010 57 days |
| 40855 |
NoahW314 author:NoahW314 |
feat(Data/ENNReal): add `sum_div` |
`Finset.sum_div` does not apply since `ℝ≥0∞` is not a `DivisionSemiring`. Although the proof of `Finset.sum_div` (and of this lemma) only needs `DivInvMonoid` and `NonUnitalNonAssocSemiring`, the best typeclass including these is `DivisionSemiring`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
Removed the `open ENNReal` in `MeanInequalities` to avoid ambiguity with `Finset.sum_div`.
|
t-data |
7/1 |
Mathlib/Analysis/MeanInequalities.lean,Mathlib/Data/ENNReal/BigOperators.lean |
2 |
2 |
['SnirBroshi', 'github-actions', 'madvorak'] |
nobody |
11-38503 11 days ago |
35-69418 35 days ago |
35-69836 35 days |
| 40276 |
gasparattila author:gasparattila |
feat(Order/Partition/Finpartition): lemmas for `restrict` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
34/1 |
Mathlib/Order/Partition/Finpartition.lean |
1 |
1 |
['github-actions', 'madvorak'] |
nobody |
11-36372 11 days ago |
50-73751 50 days ago |
50-73631 50 days |
| 36428 |
wrenna-robson author:wrenna-robson |
feat(Logic/Equiv/Fin): Streamline equiv definitions using mkDivMod |
This PR uses Fin.mkDivMod to streamline the related equivalence and introduces Nat.mkDivMod to a similar end.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
64/67 |
Mathlib/Analysis/SpecialFunctions/Complex/Arctan.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Series.lean,Mathlib/Data/Nat/Init.lean,Mathlib/Logic/Equiv/Fin/Basic.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/Order/Partition/Equipartition.lean |
6 |
6 |
['JovanGerb', 'github-actions', 'mathlib-merge-conflicts', 'wrenna-robson'] |
TwoFX assignee:TwoFX |
11-32181 11 days ago |
11-35301 11 days ago |
38-75922 38 days |
| 41702 |
smmercuri author:smmercuri |
chore: make `adicCompletion` and `Completion` print nicer |
- Stop `toCompletion` and `ofCompletion` printing with braces
- Arguments to `completionMap` should be explicit.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
37/6 |
Mathlib/NumberTheory/NumberField/Completion/InfinitePlace.lean,Mathlib/NumberTheory/NumberField/Completion/LiesOverInstances.lean,Mathlib/RingTheory/DedekindDomain/AdicValuation.lean |
3 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
11-11174 11 days ago |
11-13608 11 days ago |
12-67701 12 days |
| 41291 |
tb65536 author:tb65536 |
refactor(RingTheory/IntegralClosure/IsIntegral/Basic): use `FaithfulSMul` in `isIntegral_algebraMap_iff` |
Currently `isIntegral_algebraMap_iff` takes an explicit assumption stating that `algebraMap A B` is nonzero, but a `[FaithfulSMul A B]` typeclass is more idiomatic (and can almost always be inferred automatically).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
25/30 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Algebra.lean,Mathlib/NumberTheory/Niven.lean,Mathlib/NumberTheory/NumberField/CMField.lean,Mathlib/NumberTheory/NumberField/Cyclotomic/Basic.lean,Mathlib/RingTheory/Adjoin/PowerBasis.lean,Mathlib/RingTheory/IntegralClosure/IntegralRestrict.lean,Mathlib/RingTheory/IntegralClosure/IntegrallyClosed.lean,Mathlib/RingTheory/IntegralClosure/IsIntegral/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Defs.lean,Mathlib/RingTheory/Invariant/Galois.lean,Mathlib/RingTheory/IsGaloisGroup/Basic.lean,Mathlib/RingTheory/Norm/Transitivity.lean,Mathlib/RingTheory/Trace/Basic.lean,Mathlib/RingTheory/ZariskisMainTheorem.lean |
15 |
2 |
['github-actions', 'plp127'] |
nobody |
11-10938 11 days ago |
11-15616 11 days ago |
24-18685 24 days |
| 41781 |
teng10 author:teng10 |
feat(Algebra/Representation): add abstract permutation action in TensorPower |
Hello, I'm a new contributor. I had an introduction here on [zulip](https://leanprover.zulipchat.com/#narrow/channel/113489-new-members/topic/Introduction.3A.20Schur.20Weyl.20Duality/with/607194314)
This PR is a first step in formalizing Shur Weyl duality, which I got feedback that it would be useful to mathlib. The final statement I had in mind has the form
/--
The centralizer of `{g^{⊗k} | g ∈ End(V)}`equals `Span{W_σ | σ ∈ S_k}`, for all dimensions `d` and tensor powers `k`.
---/
This PR tries to define permutation action on TensorPower; define permutation image space.
An initial version of the definition is more specific to the Euclidean space (for reference I list them below)
```
open scoped TensorProduct
variable {d : ℕ} {k : ℕ}
/-- The `k`-fold tensor power of `ℂ^d`, defined as `⨂[ℂ] (i : Fin k), (Fin d → ℂ)`. -/
abbrev PiTensorPower (d k : ℕ) : Type :=
PiTensorProduct ℂ (fun (_ : Fin k) => (Fin d → ℂ))
/-- The permutation operator `W_σ` on the tensor power `V^{⊗k}`.
Given `σ : Equiv.Perm (Fin k)`, this acts by permuting the tensor factors:
`W_σ (v₁ ⊗ ⋯ ⊗ vₖ) = v_{σ⁻¹(1)} ⊗ ⋯ ⊗ v_{σ⁻¹(k)}`. -/
def permAction (d : ℕ) {k : ℕ} (σ : Equiv.Perm (Fin k)) :
PiTensorPower d k ≃ₗ[ℂ] TensV d k :=
PiTensorProduct.reindex ℂ (fun (_ : Fin k) => (Fin d → ℂ)) σ
/-- The set of permutation operators in `End(V^{⊗k})`. -/
def permImage (d k : ℕ) : Set (Module.End ℂ (TensV d k)) :=
Set.range (fun σ : Equiv.Perm (Fin k) => (permAction d σ).toLinearMap)
```
LLM acknowledgement: I have used aristotle to write these definitions. However, I am very motivated to learn how to write proper code. I have looked more into `PiTensorProduct` and `TensorPower` module and came to the abstract version in the PR. I tried to ask aristotle about how it's defining things and whether it's suitable for mathlib.
And I would very much appreciate your thoughts on how appropriate these definitions are. Thanks for your time!
Yanting
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
new-contributor
label:t-algebra$ |
22/0 |
Mathlib/LinearAlgebra/TensorPower/Basic.lean |
1 |
4 |
['github-actions', 'teng10'] |
nobody |
11-10557 11 days ago |
11-13157 11 days ago |
11-13053 11 days |
| 41777 |
ADedecker author:ADedecker |
chore: switch `IsQuasiInverse.of_comp_[left, right]` |
Also add a bit of doc and switch some arguments to enforce some asymmetry in the API for `IsQuasiInverse`: as a convention, we think of the first argument as a quasi-inverse to the second one, instead of the converse.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
36/22 |
Mathlib/Algebra/Module/LinearMap/FiniteRange.lean |
1 |
1 |
['github-actions'] |
nobody |
11-10448 11 days ago |
11-14266 11 days ago |
11-14146 11 days |
| 41775 |
JovanGerb author:JovanGerb |
chore(Order/SymmDiff): use `to_dual` |
This PR generates `bihimp` from `symmDiff` using `to_dual`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
45/161 |
Mathlib/Order/SymmDiff.lean,Mathlib/Tactic/Translate/ToDual.lean |
2 |
1 |
['github-actions'] |
nobody |
11-9824 11 days ago |
11-14617 11 days ago |
11-14497 11 days |
| 41774 |
gasparattila author:gasparattila |
feat(Topology/Algebra): topology on `ContinuousAffineMap` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
large-import
|
236/4 |
Mathlib.lean,Mathlib/Analysis/Normed/Affine/ContinuousAffineMap.lean,Mathlib/Topology/Algebra/ContinuousAffineMap/Topology.lean,Mathlib/Topology/Algebra/Group/Torsor.lean |
4 |
1 |
['github-actions'] |
nobody |
11-9689 11 days ago |
11-13070 11 days ago |
11-14073 11 days |
| 41403 |
YaelDillies author:YaelDillies |
chore(Algebra/SkewMonoidAlgebra): deprecate `sum` |
One should just use `Finsupp.sum` instead.
---
- [x] depends on: #41365
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
125/154 |
Mathlib/Algebra/SkewMonoidAlgebra/Basic.lean,Mathlib/Algebra/SkewMonoidAlgebra/Lift.lean,Mathlib/Algebra/SkewMonoidAlgebra/Support.lean,Mathlib/Algebra/SkewPolynomial/Basic.lean |
4 |
15 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
11-1603 11 days ago |
18-26866 18 days ago |
18-30348 18 days |
| 41793 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph): `fromEdgeSet edgeSet` for subgraphs and walks |
`fromEdgeSet G'.edgeSet = G'.spanningCoe` for a subgraph `G'`
`fromEdgeSet p.edgeSet = p.toSubgraph.spanningCoe` for a walk `p`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
16/2 |
Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
3 |
1 |
['github-actions'] |
nobody |
10-82476 10 days ago |
10-83053 10 days ago |
10-82933 10 days |
| 41776 |
JovanGerb author:JovanGerb |
fix(Order/Heyting/Regular): fix `Lattice` instance diamond |
This PR fixes a diamond in the `Lattice` instance on `Regular`.
It's a bit awkward that `Lattice` does not extend `Min`, so `fast_instance%` doesn't save us here.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-order
|
1/2 |
Mathlib/Order/Heyting/Regular.lean |
1 |
5 |
['JovanGerb', 'YaelDillies', 'eric-wieser', 'github-actions'] |
YaelDillies assignee:YaelDillies |
10-78136 10 days ago |
11-14488 11 days ago |
11-14368 11 days |
| 41800 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): `IsTrail` `concat` iff |
---
Also golf and fix the name of `concat_isPath_iff`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
15/5 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean |
1 |
1 |
['github-actions'] |
nobody |
10-75907 10 days ago |
10-76513 10 days ago |
10-76393 10 days |
| 41798 |
FrankieNC author:FrankieNC |
feat(MeasureTheory): pushforward of Hausdorff measure under a homothety |
Prove `Measure.map (AffineMap.homothety x c) μH[d] = ‖c‖₊⁻¹ ^ d • μH[d]` for `c ≠ 0`, resolving the TODO in `Mathlib/MeasureTheory/Measure/Hausdorff.lean`: the generalisation of `AffineMap.homothety_continuous` it was waiting for has since been merged, so the result follows from `hausdorffMeasure_homothety_preimage` via `Measure.ext`. |
t-measure-probability |
5/3 |
Mathlib/MeasureTheory/Measure/Hausdorff.lean |
1 |
1 |
['github-actions'] |
nobody |
10-73866 10 days ago |
10-77001 10 days ago |
10-76881 10 days |
| 41361 |
lakesare author:lakesare |
feat(Order/ConditionallyCompleteLattice/Finset): add `sup_eq_ciSup` |
From the Carleson project.
___
**Upstreaming from Carleson: [/Carleson/ToMathlib/Data/Finset/Lattice/Fold.lean](https://github.com/fpvandoorn/carleson/blob/a3e427dc0f23f6b818c7f7d32f2b1d2ccfab1f21/Carleson/ToMathlib/Data/Finset/Lattice/Fold.lean)**
Changes from the Carleson version:
1. `sup_eq_iSup'` is refactored (to shorten the proof & to make some of the imports unnecessary)
2. `sup_eq_iSup'` is renamed to `sup_eq_ciSup`
3. Carleson-suggested file was `/Data/Finset/Lattice/Fold.lean`, but we placed the theorem into `/Order/ConditionallyCompleteLattice/Finset.lean`
|
carleson
new-contributor
t-order
|
7/4 |
Mathlib/Order/ConditionallyCompleteLattice/Finset.lean |
1 |
17 |
['SnirBroshi', 'github-actions', 'j-loreaux', 'lakesare'] |
nobody |
10-73593 10 days ago |
12-73960 12 days ago |
13-20518 13 days |
| 41803 |
benjub author:benjub |
feat(Topology/order/IntermediateValue): continuous induction from sSup membership |
Add `mem_of_csSup_mem_of_forall_exists_gt`, that generalizes `IsClosed.mem_of_ge_of_forall_exists_gt` by weakening the closedness hypothesis to membership of the supremum. Derive `IsClosed.mem_of_ge_of_forall_exists_gt` from it.
---
This result was already in essence in `IsClosed.mem_of_ge_of_forall_exists_gt`, which uses closedness only to obtain membership of the supremum.
This new result does not require `[TopologicalSpace α] [OrderTopology α]` (it is purely order-theoretic), but I still placed it next to `IsClosed.mem_of_ge_of_forall_exists_gt`. I am open to moving it to another file if the reviewer sees fit.
There are cases where that more general lemma is needed, because closedness either does not hold or would be longer to prove. For instance, I need that generalization to shorten the proof in the draft PR #41552. |
t-topology
new-contributor
|
21/11 |
Mathlib/Topology/Order/IntermediateValue.lean |
1 |
3 |
['benjub', 'github-actions'] |
nobody |
10-67155 10 days ago |
10-69030 10 days ago |
10-68910 10 days |
| 40266 |
WangJiabai author:WangJiabai |
feat(RingTheory/MvPolynomial): define generic determinantal ideals |
This PR adds a foundational API for determinantal ideals of the generic matrix.
It defines `Matrix.MinorIndex`, the corresponding minors of the existing generic
matrix `Matrix.mvPolynomialX`, the finite set of all `t × t` generic minors, and
the ideal generated by these minors in `MvPolynomial (Fin m × Fin n) R`.
It also proves basic membership, evaluation, coefficient-map/base-change, and
finite-generation lemmas.
This PR intentionally does not include the Sturmfels/KRS/straightening/Groebner
part of the development.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Additional context:
This is extracted and refactored from a standalone project on determinantal
ideals and the Gröbner-basis theorem for generic determinantal ideals:
https://github.com/WangJiabai/Determinantal-Ideals-Formalization
The current PR is intentionally limited to the small foundational API for
generic minors and generic determinantal ideals.
AI use:
ChatGPT was used for planning/refactoring discussion, and Codex was used to
draft some proof scripts. I reviewed the statements and proofs and am
responsible for the submitted code.
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
LLM-generated
|
227/0 |
Mathlib.lean,Mathlib/RingTheory/MvPolynomial/DeterminantalIdeal.lean |
2 |
3 |
['WangJiabai', 'github-actions'] |
alreadydone assignee:alreadydone |
10-67149 10 days ago |
51-9333 51 days ago |
51-9213 51 days |
| 38815 |
dagurtomas author:dagurtomas |
feat(Tactic/CategoryTheory): extend `@[to_app]` to natural transformations |
This extends the `@[to_app]` attribute so it also generates componentwise lemmas from equalities of natural transformations between functors, while preserving the existing bicategory behavior. It also ensures generated component lemmas remain usable by dsimp when they are definitionally true. |
t-category-theory
LLM-generated
t-meta
|
148/22 |
Mathlib/Tactic/CategoryTheory/ToApp.lean,Mathlib/Util/AddRelatedDecl.lean,MathlibTest/CategoryTheory/ToApp.lean |
3 |
1 |
['github-actions'] |
nobody |
10-66247 10 days ago |
86-5347 86 days ago |
86-5281 86 days |
| 37680 |
IvanRenison author:IvanRenison |
feat(Combinatorics/SimpleGraph/Clique): add lemmas about isomorphisms and cliques |
---
Idea from this Zulip thread: [#**graph theory>Second Order Monadic Logic for Graph** ](https://leanprover.zulipchat.com/#narrow/channel/252551-graph-theory/topic/Second.20Order.20Monadic.20Logic.20for.20Graph/with/583013775)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37649
- [x] depends on: #37640
- [x] depends on: #37676
- [x] depends on: #37697
- [x] depends on: #37700
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
86/0 |
Mathlib/Combinatorics/SimpleGraph/Clique.lean |
1 |
6 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
10-66245 10 days ago |
49-20422 49 days ago |
49-20834 49 days |
| 39288 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/Subgraph): add `Embedding.ofIsInduced` and `IsInduced.map` |
Three additions to the `SimpleGraph.Subgraph` API for induced subgraphs. `Embedding.ofIsInduced` is the canonical embedding of an induced subgraph into its ambient graph, paired with `toHom_ofIsInduced` and `ofIsInduced_apply` lemmas. This is the embedding counterpart of `Subgraph.hom`, which only produces a homomorphism because non-induced subgraphs do not reflect adjacency. `Subgraph.IsInduced.map` then records that the image of an induced subgraph under a graph embedding is induced, strengthened to `IsInduced.map_iff` for the iso case.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
**Orthogonal pre-requisite of the `Copy` / `InducedCopy` refactor-feat stack.**
Extracted as a prerequisite from #38631 that is otherwise independent of the wider `Copy` / `InducedCopy` refactor-feat stack. |
t-combinatorics |
27/4 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
2 |
16 |
['FordUniver', 'SnirBroshi', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
10-66244 10 days ago |
62-43987 62 days ago |
73-79783 73 days |
| 39505 |
dannyhe652 author:dannyhe652 |
feat(SimpleGraph): add Vizing's theorem for edge coloring |
Hi! I'm a high school student interested in formulization of mathematics in Lean. Recently, I have worked on a project to formulize Vizing Theorem with Daniel Raggi from Cambridge University with AI assistance. In particular, we first drafted an outline for the proof, and built the proof using Claude Opus 4.5 and 4.6. The proof is optimized using Aristotle and finally reviewed by ourselves. We rewrote some parts of the code and some comments. The code now builds cleanly and we wish this code to be reviewed by Lean Community. I am aware that there are previous attempts, some being successful, on formulizing Vizing Theorem, including this one by Arohee https://github.com/aroheebhoja/vizing. However, I believe that no PR have been made. Our proof is not based on his proof, but it could be helpful for the community to review that project as well. I sincerely thank everyone who has time to verify and review our code. A summary of the project is as follows. Please contact me if there are any questions or problems.
## Summary
This PR completes the proof of **Vizing's theorem** for edge coloring in simple graphs, proving that the chromatic index of any graph is either Δ (the maximum degree) or Δ + 1.
## Changes
### New files
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeColoring.lean`** — Core definitions
- `edgeColoring`: Type for line graph colorings
- `edgeColorable`: Graph is edge-colorable with n colors
- `chromaticIndex`: Chromatic index as ℕ
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/KempeChain.lean`** — Kempe Chain
- Coloring observables: `incidentEdges`, `incidentColors`, `missingColors`
- Kempe subgraph structure with bounded degree
- `swapKempe`: Recolor edges in a connected component via color-swapping
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/VizingFan.lean`** — Vizing Fan Rotation
- `IsFan`: Vizing fan structure with special color properties
- Fan maximality and dichotomy on terminal vertices
- `rotate_termA`: Extend coloring when a free color exists at both endpoints
- `vizingAdjacencyLemma`: Main adjacency lemma for both cases
- **`Mathlib/Combinatorics/SimpleGraph/Coloring/VizingTheorem.lean`** — Main theorems
- `edge_eq_of_color_eq`: Proper edge colorings assign different colors to distinct edges sharing a vertex
- `maxDegree_le_chromaticIndex`: χ'(G) ≥ Δ(G)
- `chromaticIndex_bot`: Empty graph has chromatic index 0
- `vizingUpperBound_aux`: Inductive proof of upper bound on number of edge
- `vizingTheorem`: χ'(G) ∈ {Δ(G), Δ(G) + 1}
### Modified files
- `Mathlib.lean` — Added imports for the four new coloring modules
## Technical Approach
**Lower bound** (χ'(G) ≥ Δ):
- Edges incident to a max-degree vertex form a clique in the line graph
- Clique number lower-bounds chromatic number
**Upper bound** (χ'(G) ≤ Δ + 1):
- Induction on the number of edges
- Base case: empty graph colored with 0 colors
- Inductive step:
- If a free color exists at both endpoints of an edge, then extend directly
- Otherwise:
- Build a maximal fan from one endpoint
- Apply dichotomy: either extend via Term-A (free color at both endpoints) or Term-B (Kempe swap)
- Term-B uses a three-vertex connectivity argument to derive a contradiction, forcing the fan to extend
## Key Lemmas
- `incidentEdges`, `incidentColors`, `missingColors`: Coloring observables at vertices
- `kempeSubgraph`: Restricted subgraph of edges with two specific colors
- `swapKempe`: Recolor via Kempe chain swapping
- `IsFan.singleton`: Trivial fan always valid
- `IsFan.length_le_card`: Fan length is bounded by vertex count
- `IsFan.dichotomy`: Maximal fan satisfies Term-A or Term-B
- `IsFan.rotate_termA`: Term-A case extends the coloring inductively
- `vizingAdjacencyLemma`: Handles both cases for extending one edge
- `vizingUpperBound_aux`: Framework for full inductive proof
- `edge_eq_of_color_eq`: Distinctness of edges with same color
## Testing
All four modules compile with no `sorry` nor errors or warnings.
## References
* V. G. Vizing, *On an estimate of the chromatic class of a p-graph*,
Diskret. Analiz. 3 (1964), 25–30.
## Co-authors
Co-authored-by: Daniel Raggi <dr495@cam.ac.uk>
Co-authored-by: Aristotle (Harmonic) <aristotle-harmonic@harmonic.fun>
Co-authored-by: Claude Opus 4.5 & 4.6 <noreply@anthropic.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
|
1913/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeColoring.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/KempeChain.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/VizingFan.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/VizingTheorem.lean |
5 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
10-66243 10 days ago |
37-41504 37 days ago |
58-17237 58 days |
| 39530 |
RaggedR author:RaggedR |
feat(Combinatorics/SimpleGraph): group actions on simple graphs |
This adds the first connection between Mathlib's MulAction and SimpleGraph libraries. The GraphAction class asserts that a group action on the vertex type preserves the adjacency relation, and builds on it to define vertex-transitivity and arc-transitivity for graphs.
The GraphAction typeclass gives adj_smul_iff (the biconditional for group actions) and toIso (each group element induces a graph automorphism). The IsVertexTransitive class combines GraphAction with IsPretransitive, and IsArcTransitive requires transitivity on ordered adjacent pairs (arcs).
The main theorem is the standard characterization: a graph is arc-transitive if and only if it is vertex-transitive and locally transitive (the stabilizer of each vertex acts transitively on its neighbors). The forward direction is proved directly by composing a vertex-transporting element with a neighbor-transporting stabilizer element. The reverse direction shows that an arc-transitive graph with no isolated vertices is vertex-transitive.
These definitions are the algebraic graph theory prerequisites for formalizing coset graphs (Sabidussi's construction) and the characterization of symmetric graphs via double cosets and involutions (Lorimer's theorem).
---
LLM tools were used to assist with Lean formalization. The mathematical content is the author's own work. |
t-combinatorics
new-contributor
LLM-generated
|
130/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Action.lean |
2 |
7 |
['RaggedR', 'b-mehta', 'github-actions', 'mathlib-bors'] |
nobody |
10-66242 10 days ago |
64-30130 64 days ago |
68-84860 68 days |
| 39627 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/LapMatrix): 0 is always an eigenvalue |
and the determinant is always zero, plus a few other small lemmas.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39642
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
71/15 |
Mathlib/Combinatorics/SimpleGraph/LapMatrix.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
10-66242 10 days ago |
66-27117 66 days ago |
66-74707 66 days |
| 38328 |
astrainfinita author:astrainfinita |
feat: `OrderSupSet` |
This PR introduces `OrderSupSet` and `OrderInfSet`, which are typeclasses expressing that `sSup` (resp., `sInf`) returns the least upper bound (resp., the greatest lower bound) of a set whenever one exists.
This allows us to prove properties about the `sSup` of specific sets (such as `∅`, singletons, finite sets, and `univ`) without any typeclasses asserting the existence of LUBs. For example, `sSup ∅ = ⊥` holds for any type equipped with `OrderBot` `OrderSupSet`, no longer requiring typeclasses like `ConditionallyCompleteLinearOrderBot`.
For a general set `s`, this gives a uniform way to extend results about `IsLUB s a → motive a` to `motive (sSup s)`, `motive (⨆ i, f i)`, `motive (a ⊔ b)`, etc., which allows proof reuse for basic API such as [`csSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/ConditionallyCompleteLattice/Basic.html#csSup_insert), [`iSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/CompleteLattice/Basic.html#iSup_insert), and [`sSup_insert`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Order/CompleteLattice/Basic.html#sSup_insert) and downstream code like [`csSup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Pointwise/CompleteLattice.html#csSup_add), [`sSup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Pointwise/CompleteLattice.html#sSup_add), and [`sup_add`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Order/Group/Lattice.html#sup_add).
Furthermore, this allows us to refactor incrementally, reducing the dependency of results about various completeness typeclasses on the specific implementation of `sSup`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/Any.20infimum.20based.20version.20of.20.60OmegaCompletePartialOrder.60.3F)
[](https://gitpod.io/from-referrer/)
|
t-order |
156/73 |
Mathlib/MeasureTheory/OuterMeasure/Induced.lean,Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/Bounds/Defs.lean,Mathlib/Order/CompleteLattice/Basic.lean,Mathlib/Order/CompleteLattice/Defs.lean,Mathlib/Order/SetNotation.lean,Mathlib/Topology/UniformSpace/OfCompactT2.lean |
7 |
16 |
['JovanGerb', 'astrainfinita', 'b-mehta', 'github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'openendings', 'vihdzp'] |
nobody |
10-66241 10 days ago |
78-43563 78 days ago |
83-74151 83 days |
| 38906 |
lua-vr author:lua-vr |
feat(ConditionallyCompleteLattice/Indexed): add binary versions of lemmas |
Add binary versions of some of the lemmas. Those are useful when the domain is indexed over the members of a set.
From the Carleson project.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
carleson
|
21/5 |
Mathlib/Order/ConditionallyCompleteLattice/Indexed.lean |
1 |
19 |
['JovanGerb', 'SnirBroshi', 'github-actions', 'grunweg', 'lua-vr', 'mathlib-merge-conflicts'] |
nobody |
10-66239 10 days ago |
68-17969 68 days ago |
77-78162 77 days |
| 39369 |
pd4st8hb95-hub author:pd4st8hb95-hub |
feat: add basic fuzzy set definitions |
This PR adds a minimal `FuzzySet` API in `Mathlib/Order/FuzzySet`.
A fuzzy set is represented as an abbreviation:
`FuzzySet α L := α → L`
The file provides basic definitions and lemmas:
- `degree`
- `support`
- `core`
- `weakCut`
- `strongCut`
- membership simp lemmas
- extensionality
- basic monotonicity lemmas for weak and strong cuts
This PR intentionally does not add complement, union/intersection-specific API, normal or convex fuzzy sets, fuzzy relations, or advanced fuzzy set theory.
Validation:
- `lake build Mathlib.Order.FuzzySet`
- `#lint only docBlame docBlameThm`
Feedback on whether `Mathlib/Order/FuzzySet.lean` is the right location for this minimal API would be appreciated.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
new-contributor
|
169/0 |
Mathlib.lean,Mathlib/Order/FuzzySet.lean |
2 |
6 |
['github-actions', 'grunweg', 'pd4st8hb95-hub', 'wwylele'] |
nobody |
10-66239 10 days ago |
71-19977 71 days ago |
71-20217 71 days |
| 39438 |
SnirBroshi author:SnirBroshi |
chore(Order/WellFounded): use `to_dual` |
Creates `argmax`/`argmaxOn` duals to the existing `argmin`/`argminOn`,
and `WellFoundedLT.min`/`WellFoundedGT.max` in order to properly dualize `WellFounded.min_le`.
Some theorems about `WellFounded{LT/GT}` which didn't have a dual before have to be renamed to make room,
e.g. `StrictMono.range_inj` is renamed to `StrictMono.range_inj_of_wellFoundedLT`.
---
This is blocking dualizing things in `ConditionallyCompleteLattice/Basic.lean`.
`WellFounded.min_le` has ~30 usages in ~10 files, so deprecating it should probably happen in a separate PR.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
83/34 |
Mathlib/Data/Finset/Sort.lean,Mathlib/Order/Hom/Set.lean,Mathlib/Order/WellFounded.lean,Mathlib/SetTheory/Ordinal/Enum.lean,Mathlib/Tactic/Translate/ToDual.lean |
5 |
10 |
['JovanGerb', 'SnirBroshi', 'github-actions', 'vihdzp'] |
nobody |
10-66238 10 days ago |
71-63395 71 days ago |
71-71871 71 days |
| 39549 |
Hagb author:Hagb |
feat(Order/RelIso/Basic): `swap`s and `compl`s are `Equiv`s |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
13/8 |
Mathlib/Order/RelIso/Basic.lean |
1 |
3 |
['Hagb', 'github-actions', 'leanprover-radar'] |
nobody |
10-66237 10 days ago |
68-84161 68 days ago |
68-84041 68 days |
| 39553 |
Brian-Nugent author:Brian-Nugent |
feat(Algebra/CategoryTheory/ModuleCat): Locally Free is local |
We define `SheafOfModules.LocalGeneratorsData.bind` just like `SheafOfModules.QuasicoherentData.bind` and use it to show that being locally free is a local condition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #39544
- [ ] depends on: #39399
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
61/4 |
Mathlib/Algebra/Category/ModuleCat/Sheaf/Generators.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/LocallyFree.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Quasicoherent.lean |
3 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
10-66232 10 days ago |
49-1290 49 days ago |
49-7728 49 days |
| 36605 |
martinwintermath author:martinwintermath |
feat(Geometry/Convex/Cone): Add lemmas about interaction of hull, span and negation |
Prove lemmas about the interaction of hull, span and negation.
Main additions:
* `PointedCone.toSubmodule` that produces a submodule with the same support given that `-C = C`. Also the corresponding `CanLift`
* `PointedCone.hull_neg_pair_eq_span_singleton` proving `hull R {-x, x} = R ∙ x` (simp lemma)
* `PointedCone.span_eq_hull_neg_sup_hull` proving `span R s = hull R (-s) ⊔ hull R s`
* `PointedCone.mem_span` proving `x ∈ span R C ↔ ∃ p, n ∈ C, x = p - n`
Considerations: there are several ways to express that a convex cone is a submodule:
* `-C = C`
* `-C ≤ C` or `C ≤ -C`
* `C = span R C`
* `C = C.lineal`
The consensus was that the the first option is the most direct way to express this property, which then allows to lift to a submodule.
Co-authored by: Olivia Röhrig, Kilian Rueß, Artie Khovanov
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37464
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry |
65/0 |
Mathlib/Geometry/Convex/Cone/Pointed.lean |
1 |
74 |
['YaelDillies', 'artie2000', 'github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
10-66229 10 days ago |
61-83150 61 days ago |
78-83636 78 days |
| 36719 |
NoneMore author:NoneMore |
feat(ModelTheory): add `PartialType` for first-order theories |
This PR adds the definitions of partial types over theories and over parameter sets, and proves several equivalent characterizations.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36667
[](https://gitpod.io/from-referrer/)
|
t-logic
new-contributor
|
432/17 |
Mathlib.lean,Mathlib/ModelTheory/PartialTypes.lean,Mathlib/ModelTheory/Semantics.lean |
3 |
7 |
['NoneMore', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
10-63968 10 days ago |
10-64489 10 days ago |
18-47330 18 days |
| 39843 |
wwylele author:wwylele |
feat(Analysis/Meromorphic): a non-zero meromorphic function has multiplicative inverse |
This is the core lemma to say that the equivalent classes of meromorphic functions have will-defined inverse
AI usage disclosure: Aristotle was used to draft the initial proof, and it was manually restructured.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39904
[](https://gitpod.io/from-referrer/)
|
t-analysis |
28/0 |
Mathlib/Analysis/Meromorphic/Order.lean |
1 |
4 |
['CoolRmal', 'github-actions', 'mathlib-dependent-issues', 'wwylele'] |
CoolRmal assignee:CoolRmal |
10-59248 10 days ago |
15-63773 15 days ago |
20-16015 20 days |
| 41447 |
SnirBroshi author:SnirBroshi |
chore(Combinatorics/SimpleGraph/Trails): golf and cleanup |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
45/77 |
Mathlib/Combinatorics/SimpleGraph/Trails.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
10-56210 10 days ago |
19-11660 19 days ago |
19-11540 19 days |
| 41623 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Trails): a walk is Eulerian iff it is a trail of length `G.edgeSet.encard` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
|
42/7 |
Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Trails.lean |
2 |
1 |
['github-actions'] |
nobody |
10-56004 10 days ago |
15-7538 15 days ago |
15-7418 15 days |
| 41717 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Walk): more `transfer` API |
---
The Hamiltonian lemmas don't really need `Finite`; I'll fix this after #41435 (in whichever merges second).
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
tech debt
|
54/23 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Hamiltonian.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean |
4 |
1 |
['github-actions'] |
nobody |
10-55820 10 days ago |
12-53204 12 days ago |
12-53187 12 days |
| 41684 |
kebekus author:kebekus |
feat: API for logarithmic derivatives of meromorphic functions |
Provide API for logarithmic derivatives of meromorphic functions.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
large-import
|
225/10 |
Mathlib.lean,Mathlib/Analysis/Calculus/LogDeriv.lean,Mathlib/Analysis/Meromorphic/Basic.lean,Mathlib/Analysis/Meromorphic/LogDeriv.lean,Mathlib/Analysis/Meromorphic/Order.lean,Mathlib/Analysis/SpecialFunctions/Complex/LogDeriv.lean |
6 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
10-48340 10 days ago |
10-49050 10 days ago |
12-74494 12 days |
| 40533 |
kebekus author:kebekus |
feat: translation invariance of meromorphicity |
Establish a host of elementary simplifier lemmas, showing that all notions associated with the word "meromorphic" are invariant under translation.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
329/9 |
Mathlib/Analysis/Analytic/Order.lean,Mathlib/Analysis/Meromorphic/Basic.lean,Mathlib/Analysis/Meromorphic/Divisor.lean,Mathlib/Analysis/Meromorphic/NormalForm.lean,Mathlib/Analysis/Meromorphic/Order.lean,Mathlib/Analysis/Meromorphic/TrailingCoefficient.lean,Mathlib/Analysis/Normed/Group/Basic.lean,Mathlib/Analysis/Normed/Group/Pointwise.lean |
8 |
33 |
['felixpernegger', 'github-actions', 'j-loreaux', 'kebekus', 'mathlib-merge-conflicts'] |
sgouezel assignee:sgouezel |
10-44882 10 days ago |
10-46235 10 days ago |
43-46586 43 days |
| 41809 |
kebekus author:kebekus |
feat: Truncated Counting Function of Value Distribution Theory |
Introduce (and provide API for) the Truncated Logarithmic Counting Functions. These differ from the Logarithmic Counting Function in that they disregard pole orders and count all poles with multiplicity one. The truncated counting function is the quantity through which the Second Main Theorem of Value Distribution Theory is classically stated.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
t-analysis
LLM-generated
|
261/0 |
Mathlib.lean,Mathlib/Analysis/Complex/ValueDistribution/LogCounting/Truncated.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
1 |
['github-actions'] |
nobody |
10-41500 10 days ago |
10-41500 10 days ago |
10-41380 10 days |
| 41762 |
felixpernegger author:felixpernegger |
chore: replace terminal `convert` with `exact` |
Replaces terminal `convert(!)` with `exact` whenever possible.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
195/192 |
Mathlib/Algebra/BigOperators/Group/List/Basic.lean,Mathlib/Algebra/Category/ModuleCat/EpiMono.lean,Mathlib/Algebra/CharP/MixedCharZero.lean,Mathlib/Algebra/DirectSum/Module.lean,Mathlib/Algebra/Group/Action/Basic.lean,Mathlib/Algebra/Group/Fin/Tuple.lean,Mathlib/Algebra/Group/Pointwise/Set/Finite.lean,Mathlib/Algebra/Module/LocalizedModule/Basic.lean,Mathlib/Algebra/Module/NatInt.lean,Mathlib/Algebra/Module/ZLattice/Basic.lean,Mathlib/Algebra/Polynomial/AlgebraMap.lean,Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Ring/GeomSum.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Jacobian/Point.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Projective/Point.lean,Mathlib/AlgebraicGeometry/Noetherian.lean,Mathlib/AlgebraicGeometry/Properties.lean,Mathlib/AlgebraicGeometry/Spec.lean,Mathlib/Analysis/BoxIntegral/Partition/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Convolution.lean,Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/Calculus/FDeriv/ContinuousAlternatingMap.lean,Mathlib/Analysis/Calculus/FDeriv/ContinuousMultilinearMap.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/Convex/Caratheodory.lean,Mathlib/Analysis/Convex/Side.lean,Mathlib/Analysis/Convex/SpecificFunctions/Deriv.lean,Mathlib/Analysis/Fourier/AddCircle.lean,Mathlib/Analysis/FunctionalSpaces/SobolevInequality.lean,Mathlib/Analysis/Normed/Field/UnitBall.lean,Mathlib/Analysis/Normed/Lp/ProdLp.lean,Mathlib/Analysis/Normed/Lp/lpSpace.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/Orthogonality.lean,Mathlib/CategoryTheory/Abelian/Pseudoelements.lean,Mathlib/CategoryTheory/Adhesive/Basic.lean,Mathlib/CategoryTheory/Category/Basic.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/IsPullback/BicartesianSq.lean,Mathlib/CategoryTheory/Limits/Types/Coequalizers.lean,Mathlib/CategoryTheory/Localization/Opposite.lean,Mathlib/CategoryTheory/Monoidal/Internal/Module.lean,Mathlib/CategoryTheory/Monoidal/Internal/Types/Basic.lean,Mathlib/CategoryTheory/Monoidal/Internal/Types/CommGrp_.lean,Mathlib/CategoryTheory/PUnit.lean,Mathlib/CategoryTheory/PathCategory/Basic.lean,Mathlib/CategoryTheory/Sites/Types.lean,Mathlib/CategoryTheory/Subobject/Classifier/Defs.lean,Mathlib/Combinatorics/Configuration.lean,Mathlib/Combinatorics/Hindman.lean,Mathlib/Combinatorics/Nullstellensatz.lean,Mathlib/Combinatorics/SetFamily/KruskalKatona.lean,Mathlib/Combinatorics/SimpleGraph/Dart.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Chunk.lean,Mathlib/Computability/TuringMachine/ToPartrec.lean,Mathlib/Data/DFinsupp/Interval.lean,Mathlib/Data/ENNReal/Operations.lean,Mathlib/Data/Fin/Tuple/Basic.lean,Mathlib/Data/Finset/Image.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Intervals.lean,Mathlib/Data/Nat/Digits/Defs.lean,Mathlib/Data/QPF/Univariate/Basic.lean,Mathlib/Data/Sym/Basic.lean,Mathlib/FieldTheory/PrimitiveElement.lean,Mathlib/Geometry/Convex/Cone/Pointed.lean,Mathlib/Geometry/Convex/ConvexSpace/Defs.lean,Mathlib/Geometry/Euclidean/Projection.lean,Mathlib/Geometry/Manifold/ChartedSpace.lean,Mathlib/Geometry/Manifold/ContMDiff/Constructions.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/Geometry/Manifold/Sheaf/Basic.lean,Mathlib/Geometry/RingedSpace/LocallyRingedSpace/HasColimits.lean,Mathlib/Geometry/RingedSpace/OpenImmersion.lean,Mathlib/Geometry/RingedSpace/PresheafedSpace/Gluing.lean,Mathlib/GroupTheory/Finiteness.lean,Mathlib/GroupTheory/GroupAction/Quotient.lean,Mathlib/GroupTheory/Perm/Closure.lean,Mathlib/GroupTheory/Perm/Cycle/Basic.lean,Mathlib/GroupTheory/Perm/Support.lean,Mathlib/GroupTheory/Submonoid/Inverses.lean,Mathlib/LinearAlgebra/AffineSpace/AffineMap.lean,Mathlib/LinearAlgebra/AffineSpace/Centroid.lean,Mathlib/LinearAlgebra/AffineSpace/Independent.lean,Mathlib/LinearAlgebra/Dimension/LinearMap.lean,Mathlib/LinearAlgebra/Finsupp/Supported.lean,Mathlib/LinearAlgebra/Matrix/Block.lean,Mathlib/LinearAlgebra/Matrix/ToLin.lean,Mathlib/LinearAlgebra/Pi.lean,Mathlib/LinearAlgebra/PiTensorProduct/Basic.lean,Mathlib/LinearAlgebra/StdBasis.lean,Mathlib/LinearAlgebra/TensorAlgebra/Basic.lean,Mathlib/Logic/Equiv/Fin/Basic.lean,Mathlib/Logic/Equiv/Fintype.lean,Mathlib/MeasureTheory/Function/ConvergenceInDistribution.lean,Mathlib/MeasureTheory/Function/Jacobian.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/Basic.lean,Mathlib/MeasureTheory/Group/Measure.lean,Mathlib/MeasureTheory/Integral/FinMeasAdditive.lean,Mathlib/MeasureTheory/Measure/Content.lean |
152 |
15 |
['Parcly-Taxel', 'adomani', 'chenson2018', 'felixpernegger', 'github-actions', 'grunweg', 'leanprover-radar', 'mathlib-bors'] |
nobody |
10-36753 10 days ago |
11-12746 11 days ago |
11-39311 11 days |
| 41799 |
FrankieNC author:FrankieNC |
feat(Topology/MetricSpace): differentiable maps do not increase Hausdorff dimension |
Add `DifferentiableOn.dimH_image_le`: a map differentiable on a set `s` in a finite-dimensional real normed space satisfies `dimH (f '' t) ≤ dimH t` for `t ⊆ s`, by covering `t` with countably many pieces on which `f` is Lipschitz; this resolves the TODO on `ContDiffOn.dimH_image_le` by dropping its `Convex ℝ s` hypothesis (also from `ContDiffOn.dense_compl_image_of_dimH_lt_finrank`), a breaking change with no other uses in Mathlib. |
t-topology |
51/15 |
Mathlib/Topology/MetricSpace/HausdorffDimension.lean |
1 |
1 |
['github-actions'] |
CoolRmal assignee:CoolRmal |
10-34441 10 days ago |
10-76773 10 days ago |
10-76653 10 days |
| 27707 |
amellendijk author:amellendijk |
feat(NumberTheory/SelbergSieve): define Selberg's weights and prove basic results |
This PR continues the work from #23635.
Original PR: https://github.com/leanprover-community/mathlib4/pull/23635
- [x] depends on: #27702 |
t-number-theory
t-analysis
|
140/0 |
Mathlib/NumberTheory/Divisors.lean,Mathlib/NumberTheory/SelbergSieve.lean |
2 |
29 |
['MichaelStollBayreuth', 'amellendijk', 'github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
10-29965 10 days ago |
17-28554 17 days ago |
20-73161 20 days |
| 41616 |
JX-Mo author:JX-Mo |
refactor(RepresentationTheory): move instance Abelian (Rep k G) to Rep.Basic |
This instance removes the commutativity assumption on k in the current instance Abelian (Rep k G) in Rep.Iso. |
t-algebra
new-contributor
maintainer-merge
label:t-algebra$ |
2/2 |
Mathlib/RepresentationTheory/Rep/Basic.lean,Mathlib/RepresentationTheory/Rep/Iso.lean |
2 |
4 |
['github-actions', 'grunweg'] |
nobody |
10-28051 10 days ago |
15-25666 15 days ago |
15-25546 15 days |
| 41734 |
IlPreteRosso author:IlPreteRosso |
feat(DiscreteConvolution): add ring convolution definitions and properties |
Continuation of PR #34191
Adds ring convolution and its elementary properties.
Aligns the API with [Day convolution](https://leanprover-community.github.io/mathlib4_docs/Mathlib/CategoryTheory/Monoidal/DayConvolution.html) structure. Although no idea how to bridge them right now. |
t-topology
new-contributor
|
222/5 |
Mathlib/Topology/Algebra/InfiniteSum/DiscreteConvolution.lean |
1 |
3 |
['github-actions', 'grunweg'] |
nobody |
10-27378 10 days ago |
12-21505 12 days ago |
12-21385 12 days |
| 41656 |
joelriou author:joelriou |
feat(AlgebraicTopology): order relation between simplices of the nerve of a partial order |
This is applied to the characterization of the order relation between simplices of `Δ[p] ⊗ Δ[q]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
maintainer-merge
|
64/2 |
Mathlib/AlgebraicTopology/SimplicialSet/NerveNondegenerate.lean,Mathlib/AlgebraicTopology/SimplicialSet/ProdStdSimplex.lean,Mathlib/AlgebraicTopology/SimplicialSet/Subcomplex.lean |
3 |
6 |
['github-actions', 'joelriou', 'robin-carlier'] |
nobody |
10-25464 10 days ago |
10-26530 10 days ago |
13-41637 13 days |
| 41703 |
plp127 author:plp127 |
perf(Condensed/Light): speedup kernel typechecking of `InternalProjectivityProof.cocone` |
Speedup kernel typechecking of `InternalProjectivityProof.cocone` in `Mathlib/Condensed/Light/Sequence.lean`. `Functor.map_comp` for `lightProfiniteToLightCondSet` holds by `rfl`, but rewriting backwards with `Functor.map_comp` explicitly in `simp` makes the subsequent `rfl` faster in the kernel because it doesn't need to unfold as much. See [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/kernelbarfing.20in.20mathlib/near/609873490).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-condensed |
2/2 |
Mathlib/Condensed/Light/Sequence.lean |
1 |
5 |
['github-actions', 'grunweg', 'leanprover-radar', 'plp127'] |
nobody |
10-24342 10 days ago |
13-8516 13 days ago |
13-8396 13 days |
| 41260 |
SnirBroshi author:SnirBroshi |
feat(GroupTheory/Exponent): the order of a group divides a power of its exponent |
For finite groups:
- `(Monoid.exponent G).primeFactors = (Nat.card G).primeFactors`
- `Nat.card G ∣ Monoid.exponent G ^ Nat.card G`
---
This requires importing Cauchy's theorem (`GroupTheory.Perm.Cycle.Type`) in `Exponent.lean` which I'm not sure about, but the alternatives are either moving the theorems to `PGroup.lean`, or creating a new file with a strange name like `ExponentLemmas.lean`.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
large-import
|
27/5 |
Mathlib/GroupTheory/Exponent.lean,Mathlib/GroupTheory/Perm/Cycle/Type.lean |
2 |
13 |
['SnirBroshi', 'github-actions', 'ocfnash', 'tb65536'] |
tb65536 assignee:tb65536 |
10-23594 10 days ago |
24-2383 24 days ago |
24-35910 24 days |
| 39368 |
gasparattila author:gasparattila |
feat: homogenization of an affine space |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
* Alternative to #39431
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
405/0 |
Mathlib.lean,Mathlib/LinearAlgebra/AffineSpace/Homogenization.lean,docs/references.bib |
3 |
27 |
['eric-wieser', 'gasparattila', 'github-actions', 'themathqueen'] |
alreadydone assignee:alreadydone |
10-23539 10 days ago |
33-4798 33 days ago |
72-35069 72 days |
| 41814 |
JovanGerb author:JovanGerb |
fix(CategoryTheory/Limits/VanKampen): backport fix for lean#8883 |
This PR contains the fix that I had to make to get https://github.com/leanprover/lean4/pull/8883 working. When looking into this, I had concluded that the original proof should not have worked in the first place.
This was the only such failure that was present in mathlib.
I think having this fix will be helpful when work on the unification performance issue is resumed.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
1/1 |
Mathlib/CategoryTheory/Limits/VanKampen.lean |
1 |
1 |
['github-actions'] |
nobody |
10-22621 10 days ago |
10-24164 10 days ago |
10-24044 10 days |
| 29744 |
espottesmith author:espottesmith |
feat(Combinatorics): define directed hypergraphs |
This PR defines directed hypergraphs:
```
@[ext]
structure DiHypergraph (α : Type*) where
/-- The vertex set -/
vertexSet : Set α
/-- The edge set -/
edgeSet : Set ((Set α) × (Set α))
/-- Each edge is a pair (s, d), where s ⊆ vertexSet and d ⊆ vertexSet -/
edge_src_dst_isSubset_vertexSet' : ∀ ⦃e⦄, e ∈ edgeSet → e.1 ⊆ vertexSet ∧ e.2 ⊆ vertexSet
```
Additional definitions:
- tail/head stars and negative/positive stars
- some special cases (B-Graph, F-Graph, BF-Graph, and what I'm calling a "non-endless" dihypergraph, where neither the source/tail nor the destination/head are empty)
- Vertex and (hyper)edge adjacency
- isolated vertices
- empty and nonempty dihypergraphs
The design employed here is based off of #28613, but this PR does not depend on that one.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
290/0 |
Mathlib.lean,Mathlib/Combinatorics/DiHypergraph/Basic.lean |
2 |
5 |
['b-mehta', 'espottesmith', 'github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
10-18278 10 days ago |
35-15286 35 days ago |
172-18914 172 days |
| 41200 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): pure morphisms |
In this PR, we define the notion of `κ`-pure morphisms (`IsCardinalPure`) in a category `C`. This class contains split monomorphisms and is stable under `κ`-filtered colimits. When `C` is a `κ`-accessible category, we show that `κ`-pure morphisms are monomorphisms.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
|
187/6 |
Mathlib.lean,Mathlib/CategoryTheory/Presentable/Basic.lean,Mathlib/CategoryTheory/Presentable/CardinalPure.lean |
3 |
16 |
['github-actions', 'joelriou', 'smorel394'] |
nobody |
10-16211 10 days ago |
22-25797 22 days ago |
25-79760 25 days |
| 38489 |
Jun2M author:Jun2M |
feat(Topology/Algebra/InfiniteSum): Generalize ENNReal lemmas |
This PR generalizes many theorems in Topology/Algebra/InfiniteSum/ENNReal.lean from `ENNREal` to any type that satisfies a list of order-related instances, mostly
`[CommMonoid α] [CompleteLattice α] [CanonicallyOrderedMul α] [TopologicalSpace α] [SupConvergenceClass α]`
Deprecation of the original `ENNReal` lemmas are done in the next PR: #38193.
Related Zulip thread: [#Is there code for X? > Summing `ENat`s without topology](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Summing.20.60ENat.60s.20without.20topology/with/588756615)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
239/5 |
Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/OuterMeasure/OfFunction.lean,Mathlib/Probability/ProbabilityMassFunction/Monad.lean,Mathlib/Topology/Algebra/InfiniteSum/Basic.lean,Mathlib/Topology/Algebra/InfiniteSum/ENNReal.lean,Mathlib/Topology/Algebra/InfiniteSum/Order.lean |
6 |
11 |
['Jun2M', 'SnirBroshi', 'github-actions', 'j-loreaux', 'wwylele'] |
scholzhannah assignee:scholzhannah |
10-14459 10 days ago |
11-15160 11 days ago |
92-67094 92 days |
| 41821 |
Timeroot author:Timeroot |
chore(Order/Basic): add grind _=_ to Subtype.coe_lt_coe, coe_le_coe |
Add grind annotations to Subtype.coe_le_coe and Subtype.coe_lt_coe.
As noted in [this zulip thread](https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/grind.20failures/near/610812085), grind was failing to solve some fairly simple goals, and I think these are generally good annotations to have. (I think they will usually fire usefully.)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
2/2 |
Mathlib/Order/Basic.lean |
1 |
4 |
['Timeroot', 'github-actions', 'leanprover-radar'] |
nobody |
10-12181 10 days ago |
10-17584 10 days ago |
10-17464 10 days |
| 41732 |
vaca22 author:vaca22 |
feat(RingTheory/ClassGroup): add mulEquiv_mk0 |
Add a simp lemma describing how the class-group equivalence induced by a ring equivalence acts on the class of a nonzero ideal.
The image is the class of the ideal mapped along the ring equivalence. The proof compares the corresponding fractional ideals through the existing class-group equivalence and localization membership API.
**AI disclosure**: this PR is primarily LLM-generated (Claude Code).
|
t-ring-theory
new-contributor
LLM-generated
|
43/0 |
Mathlib/RingTheory/ClassGroup/Basic.lean |
1 |
3 |
['github-actions', 'vaca22'] |
nobody |
10-7269 10 days ago |
12-22543 12 days ago |
12-22423 12 days |
| 41522 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Paths): existence of longest paths/trails/cycles/circuits |
We already have the existence of a longest path/trail. This adds:
- the existence of a longest cycle/circuit
- the existence of a longest path/trail from a specific vertex
- the existence of a longest path/trail between specific endpoints
- the existence of a longest cycle/circuit at a specific vertex
---
`exists_isTrail_forall_length_le_of_pred` is the common argument that works for any predicate on trails, which is then used to prove the 10 versions mentioned above.
I know this looks a bit ugly, but taking a longest path/trail/cycle/circuit is a useful proof technique.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
128/22 |
Mathlib/Combinatorics/SimpleGraph/Acyclic.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Connected.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean |
3 |
1 |
['github-actions'] |
nobody |
10-7087 10 days ago |
17-57001 17 days ago |
17-56881 17 days |
| 41542 |
tb65536 author:tb65536 |
refactor(AlgebraicGeometry/Sites/Small): golf and remove some `backward.isDefEq.respectTransparency` |
This PR golfs and removes some `backward.isDefEq.respectTransparency`. Some proofs with the help of Claude, with further golfing by myself.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
tech debt
LLM-generated
|
58/134 |
Mathlib/AlgebraicGeometry/Sites/Small.lean,Mathlib/CategoryTheory/Sites/Over.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
9-84887 9 days ago |
11-65439 11 days ago |
16-83303 16 days |
| 41248 |
tb65536 author:tb65536 |
chore(NumberTheory/RamificationInertia/Basic): deprecate file |
This PR deprecates `NumberTheory/RamificationInertia/Basic.lean` in favor of `RingTheory/RamificationInertia/Basic.lean`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
t-number-theory
label:t-algebra$ |
40/6 |
Mathlib/NumberTheory/RamificationInertia/Basic.lean |
1 |
6 |
['Multramate', 'github-actions', 'grunweg', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
9-83338 9 days ago |
10-1037 10 days ago |
24-23655 24 days |
| 41830 |
Jun2M author:Jun2M |
feat(Data/PFun): add lemmas for ran, restrict, map, image and preimage |
Add missing simp / API lemmas for partial functions, and strengthen `preimage_inter`
from a subset inclusion to an equality. Also tag a few `Part` uniqueness lemmas
for `grind`.
- `Part`: `grind` attributes on `get_mem`, `mem_unique`, `mem_right_unique`
- `ran`: `ran_coe`, `ran_eq_empty_iff_dom_eq_empty`
- `restrict`: `dom_restrict`, `restrict_restrict`, `ran_restrict`, `preimage_restrict`
- `map`: `dom_map`, `mem_map`, `ran_map`, `image_map`, `preimage_map`
- `image` / `preimage`: `image_subset_ran`, `preimage_empty`,
`disjoint_preimage_of_disjoint`, plus `simp`/`gcongr` attributes
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
86/3 |
Mathlib/Data/PFun.lean,Mathlib/Data/Part.lean |
2 |
2 |
['github-actions'] |
nobody |
9-82799 9 days ago |
10-1085 10 days ago |
10-965 10 days |
| 41831 |
YaelDillies author:YaelDillies |
chore(RingTheory/TwoSidedIdeal): rid the `SMulMemClass (TwoSidedIdeal R) Rᵐᵒᵖ R` instance from its `inst` |
See https://github.com/leanprover-community/mathlib4/pull/40718#discussion_r3573863027.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
1/1 |
Mathlib/RingTheory/TwoSidedIdeal/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
9-82402 9 days ago |
10-819 10 days ago |
10-699 10 days |
| 41823 |
tb65536 author:tb65536 |
feat(Combinatorics/Design/Defs): definitions of combinatorial designs |
This PR adds the definitions of combinatorial designs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
141/0 |
Mathlib.lean,Mathlib/Combinatorics/Design/Defs.lean |
2 |
1 |
['github-actions'] |
nobody |
9-81180 9 days ago |
9-81235 9 days ago |
9-81116 9 days |
| 40746 |
martinwintermath author:martinwintermath |
feat(LinearAlgebra/SesquilinearForm): adding orthogonality lemmas |
Add the features proposed in #34007 to align with `PointedCone.dual`.
Other noteworthy changes:
* rename `mem_orthogonalBilin_iff` to `mem_orthogonaBilin` to align the API with `PointedCone.mem_dual`.
* generalize `orthogonal_span_singleton_eq_to_lin_ker`, and rename to `orthogonalBilin_span_singleton`.
* rename `le_orthogonalBilin_orthogonalBilin` to `IsRefl. le_orthogonalBilin_orthogonalBilin` in order to free the name for a new version that does not assume `IsRefl`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37963
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
159/17 |
Mathlib/LinearAlgebra/BilinearForm/Orthogonal.lean,Mathlib/LinearAlgebra/SesquilinearForm/Orthogonal.lean |
2 |
30 |
['github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'themathqueen'] |
nobody |
9-79409 9 days ago |
14-77924 14 days ago |
24-66735 24 days |
| 41729 |
vaca22 author:vaca22 |
feat(RingTheory/DedekindDomain): add divisor group core |
Add the formal divisor group of a Dedekind domain and bundle the existing factorization API as an additive equivalence between nonzero fractional ideals and divisors.
Divisors are finitely supported integer-valued functions on height-one primes. divisor records FractionalIdeal.count, ofDivisor reconstructs a fractional ideal from prime powers, and divisorEquiv proves these operations are inverse and send ideal multiplication to divisor addition.
------------
This is the core of the earlier larger proposal. Principal divisors and weighted degrees are deliberately left for later pull requests.
**AI disclosure**: this PR is primarily LLM-generated (Claude Code).
|
t-ring-theory
new-contributor
LLM-generated
|
100/0 |
Mathlib.lean,Mathlib/RingTheory/DedekindDomain/Divisor.lean |
2 |
4 |
['github-actions', 'grunweg', 'vaca22'] |
nobody |
9-77116 9 days ago |
9-77116 9 days ago |
11-74199 11 days |
| 41728 |
vaca22 author:vaca22 |
feat(GroupTheory): prove uniqueness of ℤᵐ⁰ automorphisms |
Prove that every order-preserving multiplicative automorphism of ℤᵐ⁰ is the identity. This also gives a Unique instance for its automorphism type and a Subsingleton instance for order-preserving multiplicative normalizations from G to ℤᵐ⁰.
The proof transports an automorphism through WithZero.exp and WithZero.log to an additive automorphism of ℤ, then excludes negation by monotonicity.
------------
**AI disclosure**: this PR is primarily LLM-generated (Claude Code).
|
t-group-theory
new-contributor
LLM-generated
|
61/0 |
Mathlib/GroupTheory/ArchimedeanDensely.lean |
1 |
4 |
['github-actions', 'grunweg', 'vaca22'] |
nobody |
9-77086 9 days ago |
9-77092 9 days ago |
11-75132 11 days |
| 41619 |
JovanGerb author:JovanGerb |
fix(Order/Notation): unify at correct transparency in sup/inf delaborators |
This PR fixes the `sup`/`inf` delaborators to use the correct transparency when unifying instances.
I discovered this problem when using `#click_suggestions`. It has the funny property of delaborating at the reducible transparency level instead of default (which usually doesn't affect delaboration, but in this case does)
Note: we may delay this PR until the next Lean version, since it splits this transparency level. The one we will then need is the implicit transparency.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
4/4 |
Mathlib/Order/Notation.lean |
1 |
1 |
['github-actions'] |
nobody |
9-75182 9 days ago |
15-19037 15 days ago |
15-18917 15 days |
| 41810 |
YaelDillies author:YaelDillies |
feat(CategoryTheory/Concrete): generic `↧` notation for `FooCat.of` |
Following a suggestion of Andrew on [Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Remove.20.60Spec.28.29.60.20notation/near/544291147).
Generated by Claude Opus based off my suggested implementation, then I rewrote the docstrings by hand.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
LLM-generated
t-meta
|
255/0 |
Mathlib.lean,Mathlib/CategoryTheory/ConcreteCategory/Basic.lean,Mathlib/CategoryTheory/ConcreteCategory/Notation.lean,MathlibTest/CategoryTheory/ConcreteCategory/Notation.lean |
4 |
13 |
['Whysoserioushah', 'YaelDillies', 'erdOne', 'github-actions'] |
nobody |
9-72953 9 days ago |
10-16145 10 days ago |
10-17664 10 days |
| 40764 |
seewoo5 author:seewoo5 |
feat(ModularForm): ramanujan-serre derivative maps modular form |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
...to modular form. Originated from sphere packing project (see [here](https://github.com/thefundamentaltheor3m/Sphere-Packing-Lean/blob/main/SpherePacking/ModularForms/Derivative.lean)). It works for any level that is a subgroup of SL2Z.
Claude is used to migrate and cleanup proofs.
- [x] depends on: #36963
- [x] depends on: #40765
[](https://gitpod.io/from-referrer/)
|
t-number-theory
LLM-generated
sphere-packing
|
70/2 |
Mathlib/NumberTheory/ModularForms/Derivative.lean |
1 |
8 |
['MichaelStollBayreuth', 'github-actions', 'loefflerd', 'mathlib-dependent-issues', 'seewoo5'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
9-68943 9 days ago |
20-55396 20 days ago |
20-55276 20 days |
| 33157 |
wwylele author:wwylele |
feat(Combinatorics): partitions and pentagonal numbers |
We prove a corollary of pentagonal number theorem: the number of partitions with odd number of distinct parts and the number of partitions with even number of distinct parts are either equal (n is not pentagonal), or (-1)^k for the k-th pentagonal number
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #33143
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
92/0 |
Mathlib.lean,Mathlib/Combinatorics/Enumerative/Partition/Basic.lean,Mathlib/Combinatorics/Enumerative/Partition/Pentagonal.lean |
3 |
8 |
['copilot-pull-request-reviewer', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'wwylele'] |
nobody |
9-67292 9 days ago |
9-68898 9 days ago |
9-69449 9 days |
| 31092 |
FlAmmmmING author:FlAmmmmING |
feat(Algebra/Group/ForwardDiff.lean): Add theorem `sum_shift_eq_fwdDiff_iter`. |
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
17/1 |
Mathlib/Algebra/Group/ForwardDiff.lean |
1 |
24 |
['BeibeiX0', 'FlAmmmmING', 'Ruben-VandeVelde', 'dagurtomas', 'github-actions', 'jcommelin', 'mathlib-bors', 'mathlib4-merge-conflict-bot'] |
riccardobrasca assignee:riccardobrasca |
9-67150 9 days ago |
32-51733 32 days ago |
86-73668 86 days |
| 37730 |
RemyDegenne author:RemyDegenne |
feat: define total variation distance |
Define the total variation distance between two finite measures, using the variation of the difference seen as signed measures.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
490/0 |
Mathlib.lean,Mathlib/MeasureTheory/Measure/Decomposition/Lebesgue.lean,Mathlib/MeasureTheory/Measure/MutuallySingular.lean,Mathlib/MeasureTheory/Measure/TotalVariation/Basic.lean,Mathlib/MeasureTheory/Measure/TotalVariation/Defs.lean,Mathlib/MeasureTheory/VectorMeasure/Basic.lean,Mathlib/MeasureTheory/VectorMeasure/TotalVariation.lean |
7 |
14 |
['DavidLedvinka', 'EtienneC30', 'RemyDegenne', 'github-actions', 'mathlib-merge-conflicts'] |
kex-y assignee:kex-y |
9-67149 9 days ago |
32-38980 32 days ago |
43-78313 43 days |
| 40551 |
emlis42 author:emlis42 |
feat(SetTheory/Ordinal): prove that `ε₀` and `Γ₀` are countable |
This PR proves that `ε₀` and `Γ₀` are countable, i.e. `Countable (ToType ε₀)` and `Countable (ToType Γ₀)`.
This completes a TODO in `SetTheory/Ordinal/Veblen.lean`. |
t-set-theory
large-import
|
144/2 |
Mathlib/SetTheory/Cardinal/Aleph.lean,Mathlib/SetTheory/Cardinal/Ordinal.lean,Mathlib/SetTheory/Ordinal/Basic.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/Ordinal/Veblen.lean |
5 |
53 |
['emlis42', 'felixpernegger', 'github-actions', 'plp127', 'vihdzp'] |
jjdishere assignee:jjdishere |
9-67146 9 days ago |
36-57450 36 days ago |
44-12926 44 days |
| 41347 |
mkaratarakis author:mkaratarakis |
feat(Tactic/ComputablePolynomial): poly_dvd_cert, certificate-based polynomial divisibility |
The `poly_dvd_cert` tactic: prove `p ∣ q` for `Polynomial K` polyrith-style — search the quotient uncertified in compiled `MetaM` (pseudo-division, so the certified identity is division-free), then verify with `ring` and cancel the leading-coefficient unit. Works over any field with concrete or symbolic coefficients, for monic divisors over any commutative ring, and for unit leading coefficients. Axiom-free (the search never enters the proof term).
Independent of the `SparsePoly` series (#41339) — this file uses only `Polynomial` and standard tactics. Split from #41282 per review request.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
|
t-meta |
290/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/ComputablePolynomial/DvdCert.lean,MathlibTest/ComputablePolynomial/PolyDvdCert.lean |
4 |
2 |
['JovanGerb', 'github-actions'] |
kim-em assignee:kim-em |
9-67145 9 days ago |
22-42817 22 days ago |
22-42816 22 days |
| 41517 |
sadasant author:sadasant |
feat(MeasureTheory): define Hellinger affinity |
Define the Hellinger affinity (Bhattacharyya coefficient) of two measures as an `ENNReal`-valued lintegral against the canonical dominating measure `μ + ν`, making the definition total with no absolute-continuity or integrability side conditions. Provide symmetry, invariance under the choice of sigma-finite dominating measure, the self-affinity of a probability measure, the `rnDeriv` and `withDensity` computation rules, the bound `≤ 1` for probability measures (via Hölder with `p = q = 2`), and the characterization that the affinity vanishes iff the measures are mutually singular. Groundwork for a formalization of Kakutani's dichotomy (1948) for infinite products of probability measures.
---
**Design notes.**
On the value type ("why not `ℝ` / `ℝ≥0` / `EReal`"): the `ℝ≥0∞`-valued lintegral against `μ + ν` makes the affinity total, which is what makes the singular direction of Kakutani's dichotomy (planned follow-up PRs) case-split-free — `hellingerAffinity_eq_zero_iff` already characterizes mutual singularity with no absolute-continuity hypothesis. `InformationTheory.klDiv` sets the precedent of an `ℝ≥0∞`-valued, standalone divergence-like quantity. The invariance lemma `hellingerAffinity_eq_lintegral_rnDeriv_mul_rnDeriv` recovers the textbook `∫ √(dμ/dρ · dν/dρ) dρ` for any σ-finite dominating `ρ`.
**Relation to f-divergences** (CC @RemyDegenne for coordination with the planned `fDiv` upstreaming from TestingLowerBounds): the affinity is the f-integral at `f = √·`, equivalently `1 −` the Hellinger-½ divergence, with `H²(μ,ν)/2 = 1 − affinity`. Rather than block on an unlanded framework, this PR keeps the affinity standalone (the `klDiv` pattern); when `fDiv` lands, a single bridging lemma of the shape `fDiv hellingerFun μ ν = 1 - hellingerAffinity μ ν` reconciles them, and I am happy to contribute it. Also happy to move the file to `Mathlib/InformationTheory/` if reviewers prefer that home over `Mathlib/MeasureTheory/Measure/`.
**Roadmap.** This is PR 1 of a planned sequence building toward Kakutani's dichotomy for `Measure.infinitePi` over an arbitrary index type (stronger than the textbook countable statement): the `lintegral` product Fubini and `Measure.pi_withDensity`, the infinite-product/summability bridges, then the singular and absolutely-continuous directions and the packaged dichotomy. Natural follow-up API for this file, available on request: `hellingerAffinity_pos_iff`, monotonicity in each argument, and the relation to the squared Hellinger distance once a distance exists.
**Attribution and AI disclosure.** This material was developed in the public [riemann-venue](https://github.com/idolum-ai/riemann-venue) repository by Daniel Rodriguez in collaboration with Claude Fable 5 (Anthropic), as part of a machine-checked formalization of Kakutani's dichotomy (1948) for infinite products of probability measures. The definitions, proofs, and the drafting of this description were done with Claude Fable 5 via Claude Code, working from a design and statement plan reviewed by the human author; all proofs are checked by Lean (`#print axioms` on the main results reports only `propext`, `Classical.choice`, `Quot.sound`), and the human author reviewed the final form, takes responsibility for it, and will answer all review comments personally. I am applying the `LLM-generated` label per the contribution guidelines. |
t-measure-probability
LLM-generated
new-contributor
|
214/0 |
Mathlib.lean,Mathlib/MeasureTheory/Measure/Hellinger.lean |
2 |
4 |
['github-actions', 'sadasant'] |
kex-y assignee:kex-y |
9-67143 9 days ago |
17-76589 17 days ago |
17-76469 17 days |
| 41847 |
stalex444 author:stalex444 |
feat(Analysis/Matrix): tightness of Tsirelson's inequality |
This PR adds Mathlib/Analysis/Matrix/CHSH.lean, closing the "Future work" item in Mathlib/Algebra/Star/CHSH.lean (whose header is updated in this same PR; module registered via mk_all).
It constructs the explicit real-Pauli CHSH tuple in 4×4 real matrices — X⊗1, Z⊗1, and (√2)⁻¹·(1⊗(X±Z)) — and proves it's a CHSH tuple. It also shows its CHSH operator sends the Bell vector ![1,0,0,1] to √2^3 times itself (the eigenvalue the Future-work item asked for).
The PR also goes further than the request: √2^3 is the least constant bounding that operator in the Loewner order (via the scoped MatrixOrder instances + the existing tsirelson_inequality), so the constant in tsirelson_inequality cannot be improved.
Small honest caveat worth stating: the "over every algebra" corollary quantifies over Type (universe-0), since hypotheses can't quantify universes; the concrete least-constant statement is universe-free.
This Lean code was drafted with the help of AI (Claude Code). I reviewed the file; built it locally against current Mathlib master and confirmed that it compiled.
---
Questions for reviewers:
- happy to make B₀' and B₁' private if preferred
- happy to provide a ℂ-matrix version if that's more useful
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
LLM-generated
|
229/6 |
Mathlib.lean,Mathlib/Algebra/Star/CHSH.lean,Mathlib/Analysis/Matrix/CHSH.lean |
3 |
5 |
['github-actions', 'stalex444'] |
nobody |
9-67113 9 days ago |
9-67730 9 days ago |
9-67610 9 days |
| 39935 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/Finite): LocallyFiniteOrder |
Adds an order-theoretic `LocallyFiniteOrder (SimpleGraph V)` instance (closed intervals are finite), distinct from the existing graph-theoretic `LocallyFinite` (vertex degrees) already in this file. The instance takes `DecidableLE` as an explicit hypothesis rather than routing through `Classical`, because per-graph `DecidableRel G.Adj` is value-dependent and cannot be a free global instance.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
Came up while writing a Möbius inversion between copy counts and induced copy counts ([WIP](https://github.com/FordUniver/mathlib4/pull/36/changes)) that sums over the closed interval `Finset.Icc G ⊤` of supergraphs. Decidability of the order plus local-finiteness of the lattice felt like a clean standalone piece to land first, before the rest of the Möbius file.
Less sure about what the conventions for declaring type class instances are in mathlib, let me know if this is not of the expected shape or should not be included at all. |
t-combinatorics |
20/0 |
Mathlib/Combinatorics/SimpleGraph/Finite.lean |
1 |
1 |
['github-actions'] |
nobody |
9-66246 9 days ago |
60-14232 60 days ago |
60-14112 60 days |
| 40197 |
plp127 author:plp127 |
feat: valuation of an algebraic element |
We prove that if `x` is algebraic over `K` then there exists some `n ≠ 0` such that the valuation of `x` raised to the `n`-th power is equal to the valuation of some element of `K`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
67/0 |
Mathlib.lean,Mathlib/RingTheory/Valuation/Algebraic.lean |
2 |
1 |
['github-actions'] |
nobody |
9-66239 9 days ago |
53-4 52 days ago |
52-86284 52 days |
| 40081 |
xroblot author:xroblot |
chore(Algebra/Algebra/Subalgebra): lower priority of Module instance |
Lower the priority of `Subalgebra.instModuleSubtypeMem` from default (1000) to `low` (100).
This instance uses `inferInstance`, which re-triggers typeclass synthesis and can be expensive
to succeed. Lowering the priority makes it a fallback when cheaper paths are available.
Benchmark results show no regressions and meaningful speedups on several files
(up to -23% on `Mathlib.LinearAlgebra.TensorProduct.Subalgebra`).
:robot: Prepared with Claude Code |
t-algebra label:t-algebra$ |
1/1 |
Mathlib/Algebra/Algebra/Subalgebra/Basic.lean |
1 |
7 |
['github-actions', 'leanprover-radar', 'plp127', 'xroblot'] |
nobody |
9-66231 9 days ago |
55-84940 55 days ago |
55-84862 55 days |
| 40155 |
TheGoedeDoel author:TheGoedeDoel |
feat: functor of localized commutative rings |
Given a functor of commutative rings R and a submonoid functor S,
we add a functor of commutative rings with objects that are localizations
of R(U) at the submonoid S(U). We also show that this functor satisfies a
universal property.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
255/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/LocalizedFunctor.lean |
2 |
14 |
['TheGoedeDoel', 'chrisflav', 'github-actions'] |
nobody |
9-66230 9 days ago |
44-75171 44 days ago |
53-75095 53 days |
| 39941 |
mkaratarakis author:mkaratarakis |
feat(Data/List): add count lemmas for duplicate detection |
## Summary
Add general list count lemmas used in the Perron–Frobenius quiver-path development:
- `List.mem_tail_of_count_ge_two`
- `List.exists_pos_get_of_dropLast_count_ge_two`
Relocated from the PF-specific file per review feedback. Proofs use upstream `List.Duplicate` API and `grind` where appropriate (per @chenson2018).
Part of the Perron–Frobenius formalization (with @or4nge19).
## Test plan
- [x] `lake build Mathlib.Data.List.Count`
- [x] `lake build Mathlib.Combinatorics.Quiver.Path.PerronFrobenius` (on integration branch)
cc @or4nge19 for review |
t-data |
24/0 |
Mathlib/Data/List/Count.lean |
1 |
3 |
['chenson2018', 'github-actions', 'mkaratarakis'] |
nobody |
9-66226 9 days ago |
60-446 60 days ago |
60-926 60 days |
| 40005 |
tautschnig author:tautschnig |
feat(Data/ZMod/Basic): isUnit characterisation in prime power moduli |
Add two lemmas characterising units in ZMod (p^n) via divisibility of the canonical lift:
isUnit_iff_not_prime_dvd_val: for prime p and n > 0,
IsUnit x ↔ ¬ p ∣ x.val.
not_isUnit_iff_prime_dvd_val: for prime p and n > 0,
¬ IsUnit x ↔ p ∣ x.val.
These specialise the existing isUnit_iff_coprime to prime power moduli, where the coprimality condition reduces to a simple divisibility check on the unique prime factor.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
15/0 |
Mathlib/Data/ZMod/Basic.lean |
1 |
3 |
['copilot-pull-request-reviewer', 'github-actions'] |
nobody |
9-66225 9 days ago |
58-41112 58 days ago |
58-40992 58 days |
| 39696 |
jsm28 author:jsm28 |
refactor(LinearAlgebra/Orientation,LinearAlgebra/AffineSpace/FiniteDimensional): instances for arbitrary orientations |
Based on suggestions by @kim-em on Zulip https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/PRs.20towards.20IMO.20geometry.202024.20P4/near/596946072 add convenience scoped instances for choosing an arbitrary orientation of a module, and for the `finrank` of the span of the vertices of a simplex.
Note: I don't understand why the latter scoped instance is only found automatically in one of the two places using it; in `Sphere/Power.lean` it's necessary to use `Affine.Simplex.fact_finrank_direction_affineSpan_eq` rather than relying on typeclass inference, but in `Angle/Sphere.lean` typeclass inference suffices.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-euclidean-geometry
label:t-algebra$ |
26/23 |
Archive/Imo/Imo2019Q2.lean,Mathlib/Geometry/Euclidean/Angle/Sphere.lean,Mathlib/Geometry/Euclidean/Sphere/Power.lean,Mathlib/LinearAlgebra/AffineSpace/FiniteDimensional.lean,Mathlib/LinearAlgebra/Orientation.lean |
5 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
eric-wieser assignee:eric-wieser |
9-62095 9 days ago |
9-63310 9 days ago |
65-14004 65 days |
| 38324 |
BryceT233 author:BryceT233 |
chore(RingTheory/AdicCompletion): make `AdicCompletion.map` linear on linear maps |
This PR upgrades `AdicCompletion.map` to be an R-linear map on the space of linear maps `M →ₗ[R] N`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
38/12 |
Mathlib/RingTheory/AdicCompletion/Basic.lean,Mathlib/RingTheory/AdicCompletion/Functoriality.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
riccardobrasca assignee:riccardobrasca |
9-61750 9 days ago |
93-68628 93 days ago |
96-51214 96 days |
| 40590 |
BryceT233 author:BryceT233 |
feat(RingTheory/AdjoinRoot): more on `AdjoinRoot' of monic polynomials |
This PR adds some missing basic API for `AdjoinRoot p` where `p` is a monic polynomial.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
27/0 |
Mathlib/RingTheory/AdjoinRoot.lean |
1 |
1 |
['github-actions'] |
nobody |
9-61427 9 days ago |
30-57338 30 days ago |
42-40718 42 days |
| 41818 |
Vierkantor author:Vierkantor |
feat(Tactic/Linter): add linter for missing `@[tactic_alt]` tags |
This PR adds a `tacticAlt` linter that complains when there are two tactics with the same user-facing name (usually: the first token in their syntax) but they aren't marked as `@[tactic_alt]` to each other. Those situations lead to duplicate entries in doc-gen's tactic overview page.
You can see example output in the tests file, or in the [build log](https://github.com/leanprover-community/mathlib4/actions/runs/29502419244/job/87654684693).
The current simple implementation has one limitation: if multiple duplicates are all being linted at once, each of them gets a linter warning. I think this is okay, but we could be a bit stricter and only produce the warning on the tactic that comes later in the environment.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
maintainer-merge
|
75/0 |
Mathlib/Tactic/ApplyAt.lean,Mathlib/Tactic/ClearExcept.lean,Mathlib/Tactic/Linter/TacticDocumentation.lean,MathlibTest/Linter/TacticDoc.lean |
4 |
5 |
['JovanGerb', 'github-actions', 'leanprover-radar'] |
JovanGerb assignee:JovanGerb |
9-59511 9 days ago |
10-6749 10 days ago |
10-6641 10 days |
| 41740 |
themathqueen author:themathqueen |
chore(Topology/Algebra/LinearMapCompletion): generalize `UniformSpace.Completion.toComplL` |
Generalize and move `toComplL` to a more appropriate file.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
(`toCompl`, `toComplL`, `toComplₗᵢ`, etc... aren't great names in my opinion, but that's a separate issue for another time)
(In another PR (maybe sometime in the near future), we should make the variables R and α explicit for `toCompl`, `toComplL`, and `toComplₗᵢ`.)
[](https://gitpod.io/from-referrer/)
|
t-topology |
26/20 |
Mathlib/Analysis/InnerProductSpace/Reproducing.lean,Mathlib/Analysis/Normed/Module/Completion.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/DistLEIntegral.lean,Mathlib/Topology/Algebra/LinearMapCompletion.lean |
4 |
3 |
['github-actions', 'mathlib-merge-conflicts', 'themathqueen'] |
nobody |
9-55163 9 days ago |
9-56354 9 days ago |
12-8651 12 days |
| 41427 |
YaelDillies author:YaelDillies |
refactor(Algebra/MvPolynomial): delete `coeff` |
... without a deprecation because we want dot notation to resolve to `AddMonoidAlgebra.coeff`.
For migration, replace bare `MvPolynomial.coeff`s with `AddMonoidAlgebra.coeff`. Dot notation `.coeff` will resolve to `AddMonoidAlgebra.coeff` without further change. `MvPolynomial.coeff m p` corresponds to `AddMonoidAlgebra.coeff p m`, so you will need to swap arguments. Note further that `AddMonoidAlgebra.coeff p` is bundled as a `Finsupp` while `MvPolynomial.coeff` is a bare function.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
label:t-algebra$ |
243/245 |
Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/MvPolynomial/Coeff.lean,Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Division.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/MvPolynomial/Eval.lean,Mathlib/Algebra/MvPolynomial/Funext.lean,Mathlib/Algebra/MvPolynomial/Monad.lean,Mathlib/Algebra/MvPolynomial/Nilpotent.lean,Mathlib/Algebra/MvPolynomial/NoZeroDivisors.lean,Mathlib/Algebra/MvPolynomial/PDeriv.lean,Mathlib/Algebra/MvPolynomial/Rename.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/Combinatorics/Nullstellensatz.lean,Mathlib/FieldTheory/AxGrothendieck.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/RingTheory/Extension/Generators.lean,Mathlib/RingTheory/Extension/Presentation/Basic.lean,Mathlib/RingTheory/MvPolynomial/Basic.lean,Mathlib/RingTheory/MvPolynomial/FreeCommRing.lean,Mathlib/RingTheory/MvPolynomial/Groebner.lean,Mathlib/RingTheory/MvPolynomial/Homogeneous.lean,Mathlib/RingTheory/MvPolynomial/IrreducibleQuadratic.lean,Mathlib/RingTheory/MvPolynomial/MonomialOrder.lean,Mathlib/RingTheory/MvPolynomial/WeightedHomogeneous.lean,Mathlib/RingTheory/MvPowerSeries/Basic.lean,Mathlib/RingTheory/MvPowerSeries/Trunc.lean,Mathlib/RingTheory/NoetherNormalization.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Polynomial/IsIntegral.lean,Mathlib/RingTheory/Polynomial/Quotient.lean,Mathlib/RingTheory/Spectrum/Prime/Polynomial.lean,Mathlib/RingTheory/TensorProduct/MvPolynomial.lean |
35 |
11 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
nobody |
9-50466 9 days ago |
9-51970 9 days ago |
18-22023 18 days |
| 41665 |
korbonits author:korbonits |
feat(Topology/Connected): transport path-connectedness along homeomorphisms |
Add `Homeomorph.pathConnectedSpace`, `Homeomorph.locallyPathConnectedSpace` and `Homeomorph.image_pathComponent`, completing the family alongside the existing `Homeomorph.connectedSpace` and `Homeomorph.locallyConnectedSpace`.
---
AI disclosure
- level: Level 5 / Level 6 in [the link shared](https://www.visidata.org/blog/2026/ai/#self-assessed-ai-level-for-contributions) -- I feel confident about the math but I am still learning Lean itself
- code: most of the Lean in this PR was drafted by Claude Code (statements, proofs, docstrings).
- direction and review: I chose the contribution, made the decisions, reviewed every line, and wrote all GitHub/Zulip comments.
- testing: I ran local lake build of files and lake env lean of some test files (uncommitted) |
t-topology
LLM-generated
new-contributor
|
22/0 |
Mathlib/Topology/Connected/LocallyPathConnected.lean,Mathlib/Topology/Connected/PathConnected.lean |
2 |
3 |
['github-actions', 'korbonits'] |
nobody |
9-44020 9 days ago |
13-75150 13 days ago |
13-75293 13 days |
| 41661 |
korbonits author:korbonits |
feat(Topology/Connected): connected and path components of products and pi types |
Add `connectedComponent_prod/pi` and `pathComponent_prod/pi`: the (path) component of a point in a product is the product of the components of its coordinates. Also add the missing `Joined.map`, `Joined.prod`, `Joined.pi` along the way.
---
Follow-up to #40092.
AI disclosure
- level: Level 5 / Level 6 in [the link shared](https://www.visidata.org/blog/2026/ai/#self-assessed-ai-level-for-contributions) -- I feel confident about the math but I am still learning Lean itself
- code: most of the Lean in this PR was drafted by Claude Code (statements, proofs, docstrings).
- direction and review: I chose the contribution, made the decisions, reviewed every line, and wrote all GitHub/Zulip comments.
- testing: I ran local lake build of files and lake env lean of some test files (uncommitted) |
t-topology
new-contributor
LLM-generated
|
48/0 |
Mathlib/Topology/Connected/Basic.lean,Mathlib/Topology/Connected/PathConnected.lean |
2 |
5 |
['github-actions', 'grunweg', 'korbonits'] |
nobody |
9-43533 9 days ago |
9-47787 9 days ago |
13-48550 13 days |
| 35349 |
RemyDegenne author:RemyDegenne |
feat: data processing inequality for the Kullback-Leibler divergence |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #34841
- [x] depends on: #35089
- [x] depends on: #27953
- [x] depends on: #39819
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
maintainer-merge
|
290/24 |
Mathlib.lean,Mathlib/Analysis/Convex/Continuous.lean,Mathlib/InformationTheory/KullbackLeibler/DataProcessing.lean,Mathlib/MeasureTheory/Measure/Decomposition/IntegralRNDeriv.lean |
4 |
16 |
['EtienneC30', 'RemyDegenne', 'VictorBoscaro', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib-splicebot'] |
EtienneC30 assignee:EtienneC30 |
9-42925 9 days ago |
10-35634 10 days ago |
25-35746 25 days |
| 41835 |
pepamontero author:pepamontero |
feat: add `orbitRel.Quotient.quotient_smul_eq` and `Homeomorph.smul_symm` |
Two small, independent lemmas separated from PR #40727 (proving the orbit space inherits `IsManifold` structure), since neither depends on manifolds and both are useful on their own:
* `orbitRel.Quotient.quotient_smul_eq`: in the quotient by `MulAction.orbitRel`, `⟦g • a⟧ = ⟦a⟧` for any `g`.
* `Homeomorph.smul_symm`: the inverse of the homeomorphism `Homeomorph.smul g` is `Homeomorph.smul g⁻¹`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
8/0 |
Mathlib/GroupTheory/GroupAction/Defs.lean,Mathlib/Topology/Algebra/ConstMulAction.lean |
2 |
7 |
['felixpernegger', 'github-actions', 'pepamontero'] |
nobody |
9-35814 9 days ago |
9-38206 9 days ago |
9-46931 9 days |
| 41479 |
YaelDillies author:YaelDillies |
feat(LinearAlgebra): dual of tensor is tensor of duals for finite projective modules |
Generalise this isomorphism and many similar ones from finite free to finite projective. To be able to deduce some isos from some other ones, I had to move them around in a preliminary PR. Note that #40297 made of the changes that the current PR was intending to do but not all, hence the slightly mangled diff.
Also change the defeq of `homTensorHomEquiv` so that it is *not* defeq to `homTensorHomMap` (but would be if `homTensorHomMap` became heterobasic). This makes `BilinForm.tensorDistribEquiv` defeq to `BilinForm.tensorDistrib`.
Also tag `LinearEquiv.congrRight` with `simps` to generate some required simp lemmas.
Human generated then golfed and edited with Claude Opus, then human-edited some more.
From FLT, PersistentDecomp
Co-authored-by: Edison Xie
Co-authored-by: Andrew Yang <the.erd.one@gmail.com>
Assisted-by: Claude Opus 4.8
---
This is a cleaned up version of #21829 reopened from a fork.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
125/95 |
Mathlib/Algebra/Module/Equiv/Basic.lean,Mathlib/LinearAlgebra/BilinearForm/TensorProduct.lean,Mathlib/LinearAlgebra/Contraction.lean,Mathlib/LinearAlgebra/TensorProduct/Map.lean,Mathlib/LinearAlgebra/Trace.lean |
5 |
13 |
['Deicyde', 'Whysoserioushah', 'YaelDillies', 'erdOne', 'github-actions', 'kbuzzard', 'mathlib-merge-conflicts'] |
nobody |
9-30179 9 days ago |
9-32254 9 days ago |
12-51824 12 days |
| 41723 |
luigi-massacci author:luigi-massacci |
feat: classical distributions induced by a locally integrable function |
Analogous to the results for Tempered Distributions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
large-import
|
127/1 |
Mathlib/Analysis/Distribution/Distribution.lean,Mathlib/Analysis/Distribution/TestFunction.lean,docs/references.bib |
3 |
1 |
['github-actions'] |
nobody |
9-29724 9 days ago |
12-35570 12 days ago |
12-35726 12 days |
| 41856 |
Ruizsolveall author:Ruizsolveall |
feat(Topology/Covering): fundamental group of the circle is ℤ |
This is the promised follow-up to #40947 (see [Zulip](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/How.20to.20wisely.20state.20Homotopy.20lifting.20lemma)); most of the file is the computation that the loop `t ↦ n • t` is sent to `n : ℤ`.
---
I used Claude to navigate the quotient covering map API and for an initial frame of the proofs, which I then reworked; I understand and can vouch for all of it.
|
t-topology
new-contributor
|
102/0 |
Mathlib.lean,Mathlib/Topology/Covering/FundamentalGroupCircle.lean |
2 |
2 |
['github-actions'] |
nobody |
9-28613 9 days ago |
9-29887 9 days ago |
9-29871 9 days |
| 40392 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Integral/Lebesgue/Basic): fix an `erw` |
Extracted from #40348.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
tech debt
maintainer-merge
|
11/1 |
Mathlib/Data/ENNReal/Operations.lean,Mathlib/MeasureTheory/Integral/Lebesgue/Basic.lean |
2 |
5 |
['felixpernegger', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
9-21908 9 days ago |
9-24017 9 days ago |
40-34622 40 days |
| 41243 |
dependabot author:dependabot |
chore(deps): bump GrantBirki/comment from 3.0.0 to 3.0.3 in /.github/workflows in the actions-version-updates group across 1 directory |
Bumps the actions-version-updates group with 1 update in the /.github/workflows directory: [GrantBirki/comment](https://github.com/grantbirki/comment).
Updates `GrantBirki/comment` from 3.0.0 to 3.0.3
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/grantbirki/comment/releases">GrantBirki/comment's releases</a>.</em></p>
<blockquote>
<h2>v3.0.3</h2>
<h2>What's Changed</h2>
<ul>
<li>Add release bundle attestations by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/48">GrantBirki/comment#48</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.3">https://github.com/GrantBirki/comment/compare/v3...v3.0.3</a></p>
<h2>v3.0.2</h2>
<h2>What's Changed</h2>
<ul>
<li>Bump version to v3.0.2 by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/47">GrantBirki/comment#47</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.2">https://github.com/GrantBirki/comment/compare/v3...v3.0.2</a></p>
<h2>v3.0.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Add dependency cooldowns by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/37">GrantBirki/comment#37</a></li>
<li>Bump actions/upload-artifact from 6.0.0 to 7.0.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/38">GrantBirki/comment#38</a></li>
<li>Bump actions/upload-artifact from 7.0.0 to 7.0.1 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/39">GrantBirki/comment#39</a></li>
<li>Bump esbuild from 0.27.7 to 0.28.1 in the npm_and_yarn group across 1 directory by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/GrantBirki/comment/pull/40">GrantBirki/comment#40</a></li>
<li>Fix template variable documentation by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/41">GrantBirki/comment#41</a></li>
<li>Reduce npm dependency surface by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/45">GrantBirki/comment#45</a></li>
<li>Add versioned release automation by <a href="https://github.com/GrantBirki"><code>@GrantBirki</code></a> in <a href="https://redirect.github.com/GrantBirki/comment/pull/46">GrantBirki/comment#46</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a href="https://github.com/GrantBirki/comment/compare/v3...v3.0.1">https://github.com/GrantBirki/comment/compare/v3...v3.0.1</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/GrantBirki/comment/commit/937820f3623fd0e300294bcc64ac7577fc0ad4cc"><code>937820f</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/48">#48</a> from GrantBirki/add-release-attestations</li>
<li><a href="https://github.com/GrantBirki/comment/commit/56617234d3c8c5bcb92b2ac851cc4925e3034254"><code>5661723</code></a> Bump version to v3.0.3</li>
<li><a href="https://github.com/GrantBirki/comment/commit/245ea8def6a8b8cd42098a154250be7098f4c97f"><code>245ea8d</code></a> Add release bundle attestations</li>
<li><a href="https://github.com/GrantBirki/comment/commit/93a7ff5a297b609ea35b67866cc3459676d2aba1"><code>93a7ff5</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/47">#47</a> from GrantBirki/bump-v3.0.2</li>
<li><a href="https://github.com/GrantBirki/comment/commit/44e0f6fce3957b6ba32ea1b28c2885c288723f4b"><code>44e0f6f</code></a> Bump version to v3.0.2</li>
<li><a href="https://github.com/GrantBirki/comment/commit/b23dd77391cf0a2538e898a73169eac9c1a6a6ff"><code>b23dd77</code></a> Merge pull request <a href="https://redirect.github.com/grantbirki/comment/issues/46">#46</a> from GrantBirki/versioned-auto-release</li>
<li><a href="https://github.com/GrantBirki/comment/commit/53e38fc3816c5a0ab34974efe7e26772fa504e39"><code>53e38fc</code></a> Make release workflow reruns resumable</li>
<li><a href="https://github.com/GrantBirki/comment/commit/b95b12a9f0e8d416e4dee45b1247c2ffa0d80f6b"><code>b95b12a</code></a> Disable persisted checkout credentials</li>
<li><a href="https://github.com/GrantBirki/comment/commit/a56acd4048fa2bfef519dbbc7b9f91cfceca3818"><code>a56acd4</code></a> Remove release workflow npm cache</li>
<li><a href="https://github.com/GrantBirki/comment/commit/f802ba8fc0cb98597304197afcbb85edd6d438a7"><code>f802ba8</code></a> Rename action version export</li>
<li>Additional commits viewable in <a href="https://github.com/grantbirki/comment/compare/3439715f0cf3b8fc29bf47be0e3226679c06c41a...937820f3623fd0e300294bcc64ac7577fc0ad4cc">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions
</details> |
dependencies
github_actions
CI
maintainer-merge
|
2/2 |
.github/workflows/build_template.yml,.github/workflows/maintainer_merge_wf_run.yml |
2 |
3 |
['github-actions', 'joneugster'] |
nobody |
9-21694 9 days ago |
25-19672 25 days ago |
25-19552 25 days |
| 41845 |
tb65536 author:tb65536 |
chore(GroupTheory/GroupAction/Defs): remove duplicate subgroup action instances |
This PR removes a few duplicate subgroup action instances.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
0/9 |
Mathlib/Algebra/Group/Subgroup/Actions.lean,Mathlib/GroupTheory/GroupAction/Defs.lean |
2 |
1 |
['github-actions'] |
nobody |
9-21287 9 days ago |
9-69082 9 days ago |
9-68963 9 days |
| 41498 |
pepamontero author:pepamontero |
feat(Analysis/SpecificLimits/Normed): the sum ∑' n, n ^ k * r ^ n via Stirling numbers |
For `‖r‖ < 1`, compute `∑' n : ℕ, n ^ k * r ^ n` as the finite sum `∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j / (1 - r) ^ (j + 1)`, where `S(k, j)` are the Stirling numbers of the second kind.
**Motivation:** a special case of `tsum_sq_mul_geometric_of_norm_lt_one` over `ℂ` was proved in the FLT project and is generalized here to match the surrounding Mathlib API; the private FLT lemma can then be replaced by this one.
**Main additions to `Normed.lean`:**
- The general power formula:
- `hasSum_pow_mul_geometric_of_norm_lt_one'` / `tsum_pow_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n ^ k * r ^ n = ∑ j ∈ range (k + 1), S(k, j) * j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_pow_mul_geometric_of_norm_lt_one` / `tsum_pow_mul_geometric_of_norm_lt_one`: the same in a field, with `/ (1 - r) ^ (j + 1)`.
- The `descFactorial` special case that supplies each term of that sum:
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one'` / `tsum_descFactorial_mul_geometric_of_norm_lt_one'`: for `‖r‖ < 1` in a general ring, `∑' n, n.descFactorial j * r ^ n = j ! * r ^ j * ((1 - r)⁻¹ʳ) ^ (j + 1)`.
- `hasSum_descFactorial_mul_geometric_of_norm_lt_one` / `tsum_descFactorial_mul_geometric_of_norm_lt_one`: the field versions, with `/ (1 - r) ^ (j + 1)`.
**Additions to other files:**
- `Combinatorics/Enumerative/Stirling.lean`: `Nat.pow_eq_sum_stirlingSecond_mul_descFactorial`, expressing every power `n ^ k` as a linear combination `n ^ k = ∑ j ∈ range (k + 1), stirlingSecond k j * n.descFactorial j`.
- `Data/Nat/Factorial/Basic.lean`: `Nat.descFactorial_mul_self`, the identity `n.descFactorial j * n = n.descFactorial (j + 1) + j * n.descFactorial j`, used in the induction proving the Stirling result above.
**Other changes:**
- `summable_pow_mul_geometric_of_norm_lt_one` (statement unchanged) is now a one-line consequence of the general formula; its previous proof via `ascPochhammer` is deleted, so the `RingTheory.Polynomial.Pochhammer` import is no longer needed.
- The statement of `summable_descFactorial_mul_geometric_of_norm_lt_one` changes from the shifted summand `(n + k).descFactorial k * r ^ n` to `n.descFactorial k * r ^ n`, to match the new `hasSum`/`tsum` lemmas. It had no other uses in Mathlib, and the shifted form is recoverable in one line from `summable_choose_mul_geometric_of_norm_lt_one`.
- The proof of `hasSum_coe_mul_geometric_of_norm_lt_one'` (`k = 1`) is simplified using the general formula, and the `k = 2` case is added: `∑' n, n ^ 2 * r ^ n = r * (1 + r) / (1 - r) ^ 3` (`hasSum_sq_mul_geometric_of_norm_lt_one'` and the three companion lemmas).
**Note**: redundant imports no longer needed because of changes to the code have not been removed yet since at least 5 other files depend on these as transitive imports.
**AI Disclosure**: this code originated in the FLT project, where an initial version was written by William Coram and Samuel Yin with AI assistance (Claude, later cleaned up with Codex). It has since been substantially rewritten for this PR; little of the original generated code remains.
Co-authored-by: Malhar A. Patel <142735852+Mal-Pat@users.noreply.github.com>
Co-authored-by: William Coram
Co-authored-by: Samuel Yin
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
large-import
t-analysis
maintainer-merge
|
195/83 |
Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/SpecialFunctions/OrdinaryHypergeometric.lean,Mathlib/Analysis/SpecialFunctions/Pochhammer.lean,Mathlib/Analysis/SpecialFunctions/PolynomialExp.lean,Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Basic.lean,Mathlib/Analysis/SpecificLimits/Normed.lean,Mathlib/Combinatorics/Enumerative/Stirling.lean,Mathlib/Data/Nat/Factorial/Basic.lean,Mathlib/InformationTheory/Coding/KraftMcMillan.lean,Mathlib/Topology/Instances/CantorSet.lean |
11 |
34 |
['Mal-Pat', 'YaelDillies', 'github-actions', 'grunweg', 'pepamontero'] |
nobody |
9-21157 9 days ago |
9-82161 9 days ago |
15-18591 15 days |
| 39799 |
NoahW314 author:NoahW314 |
chore(RingTheory/Ideal/Operations): deprecate duplicate theorem `Ideal.span_mul_span'` |
`Ideal.span_mul_span'` is identical to `Ideal.span_mul_span`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
At one point, `Ideal.span_mul_span` and `Ideal.span_mul_span'` were distinct, but `Ideal.span_mul_span` was changed in #22151 to be identical to `Ideal.span_mul_span'`. |
t-ring-theory |
6/7 |
Mathlib/RingTheory/GradedAlgebra/Homogeneous/Ideal.lean,Mathlib/RingTheory/Ideal/Norm/RelNorm.lean,Mathlib/RingTheory/Ideal/Operations.lean,scripts/nolints_prime_decls.txt |
4 |
2 |
['faenuccio', 'github-actions'] |
jjdishere assignee:jjdishere |
9-19690 9 days ago |
62-64019 62 days ago |
62-63899 62 days |
| 40510 |
felixpernegger author:felixpernegger |
refactor: reorganize Topology/EMetricSpace/Defs to generalise basic results |
This PR reorganizes the Topology/EMetricSpace/Defs so that various results that previously only held for `PseudoEMetricSpace` now also hold for `WeakPseudoEMetricSpace` (in particular ENNReal etc). This is a necessary stepping stone to generalise many definitions and theorems across mathlib to `WeakPseudoEMetricSpace`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
maintainer-merge
|
288/183 |
Mathlib.lean,Mathlib/Topology/EMetricSpace/Defs.lean,Mathlib/Topology/EMetricSpace/MulOpposite.lean,Mathlib/Topology/EMetricSpace/Weak.lean,Mathlib/Topology/MetricSpace/HausdorffDistance.lean,Mathlib/Topology/MetricSpace/IsometricSMul.lean,Mathlib/Topology/MetricSpace/Pseudo/Defs.lean |
7 |
28 |
['felixpernegger', 'github-actions', 'mathlib-bors', 'scholzhannah'] |
scholzhannah assignee:scholzhannah |
9-18078 9 days ago |
9-19995 9 days ago |
41-12272 41 days |
| 32294 |
jsm28 author:jsm28 |
feat(Geometry/Euclidean/Angle/Incenter): distance from second intersection with circumcircle |
Add the following lemma: given a triangle ABC, suppose an angle bisector from A through the incenter or excenter I meets the circumcircle again at X (including the case of an external bisector at A tangent to the circle, in which case X = A). Then XB = XI (= XC, by applying this lemma again). This is a standard configuration: https://en.wikipedia.org/wiki/Incenter%E2%80%93excenter_lemma
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #30981
- [ ] depends on: #30982
- [ ] depends on: #32019
- [ ] depends on: #32021
- [ ] depends on: #32023
- [ ] depends on: #32270
- [ ] depends on: #32290
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry |
214/0 |
Mathlib/Geometry/Euclidean/Angle/Incenter.lean |
1 |
13 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'peakpoint'] |
nobody |
9-15845 9 days ago |
23-31706 23 days ago |
121-1675 121 days |
| 41120 |
teorth author:teorth |
feat(Analysis/SpecialFunctions/Gamma/Deriv,NumberTheory/Harmonic/GammaDeriv): formulae for the derivative of Gamma / eulerMascheroni |
Some integral representations of the derivative of the Gamma function, or the Euler-Mascheroni constant, focusing on the real form of the Gamma function rather than the complex one (as formulae for the latter are already present).
---
The initial code was human generated; an AI agent was used to help proofread and refactor the code subsequently.
- [x] depends on: #41119
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor |
86/8 |
Mathlib/Analysis/SpecialFunctions/Gamma/Deriv.lean,Mathlib/NumberTheory/Harmonic/GammaDeriv.lean |
2 |
6 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
9-11050 9 days ago |
9-13681 9 days ago |
9-82103 9 days |
| 41863 |
scholzhannah author:scholzhannah |
chore(Order/Filter/Extr): rename various lemmas |
Per the mathlib naming conventions
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
95/61 |
Mathlib/Analysis/Calculus/LocalExtr/LineDeriv.lean,Mathlib/Analysis/Complex/AbsMax.lean,Mathlib/Order/Filter/Extr.lean,Mathlib/Topology/Order/LocalExtr.lean,Mathlib/Topology/Order/Rolle.lean |
5 |
2 |
['github-actions'] |
nobody |
9-10211 9 days ago |
9-10258 9 days ago |
9-10146 9 days |
| 41865 |
scholzhannah author:scholzhannah |
chore(Topology/Order/LocalExtr): rename several theorems |
Per the mathlib naming conventions. Also discussed on Zulip [#mathlib4 > Renaming `IsLocalMin.on` and `IsMinOn.localize`](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Renaming.20.60IsLocalMin.2Eon.60.20and.20.60IsMinOn.2Elocalize.60/with/611258354).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
40/21 |
Mathlib/Analysis/Calculus/Darboux.lean,Mathlib/Analysis/Calculus/LocalExtr/Basic.lean,Mathlib/Analysis/Convex/Extrema.lean,Mathlib/Analysis/InnerProductSpace/Rayleigh.lean,Mathlib/Topology/Order/LocalExtr.lean |
5 |
1 |
['github-actions'] |
nobody |
9-9506 9 days ago |
9-9560 9 days ago |
9-9450 9 days |
| 41861 |
stalex444 author:stalex444 |
feat(Algebra/Order/Floor): floor-of-sum dichotomy via fractional parts |
This PR adds four lemmas in Mathlib/Algebra/Order/Floor/Ring.lean, placed in the fractional-part section, complementing the existing one-sided bounds le_floor_add and le_floor_add_floor.
Here are the lemmas:
* floor_add_eq — writes ⌊a + b⌋ exactly as ⌊a⌋ + ⌊b⌋ + ⌊fract a + fract b⌋
* floor_add_eq_add_iff — the floors add exactly ⟺ the fractional parts sum below 1
* floor_add_eq_add_add_one_iff — the +1 case ⟺ the fractional parts sum to at least 1
* floor_add_eq_or — the dichotomy: it's always one or the other
The library has the two inequalities but not the exact case analysis, and this closes that small gap. In addition, these are the lemmas for the mechanical/Beatty-word development proposed here --https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Sturmian.20.28mechanical.29.20words/near/610836902.
Claude helped draft the Lean code; I reviewed the code, built the module locally, and it compiled.
---
I'm flexible on the lemma names should reviewers prefer different forms
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
new-contributor
label:t-algebra$ |
25/0 |
Mathlib/Algebra/Order/Floor/Ring.lean |
1 |
5 |
['BoltonBailey', 'github-actions', 'stalex444'] |
nobody |
9-4055 9 days ago |
9-4055 9 days ago |
9-13509 9 days |
| 41864 |
kebekus author:kebekus |
feat: estimate for logarithmic counting functions |
In preparation to the proof of the "Lemma of Logarithmic Derivatives" of Value Distribution Theory, establish the standard "Counting Estimate" for the logarithmic counting function. Simplify and streamline the API for restrictions of divisors a little.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
LLM-generated
|
124/15 |
Mathlib/Analysis/Complex/ValueDistribution/FirstMainTheorem.lean,Mathlib/Analysis/Complex/ValueDistribution/LogCounting/Basic.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
1 |
['github-actions'] |
nobody |
9-3561 9 days ago |
9-3561 9 days ago |
9-3441 9 days |
| 38859 |
SnirBroshi author:SnirBroshi |
feat(Order/CompleteLattice/Basic): tag `iSup_of_empty'` with `@[simp]` |
The theorem says `iSup f = sSup ∅` when the domain of `f` is empty, and dually `iInf f = sInf ∅`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
31/47 |
Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Analysis/Normed/Lp/lpSpace.lean,Mathlib/Analysis/Seminorm.lean,Mathlib/Data/ENat/Lattice.lean,Mathlib/Data/NNReal/Basic.lean,Mathlib/Data/Set/Finite/Lattice.lean,Mathlib/LinearAlgebra/Eigenspace/Pi.lean,Mathlib/MeasureTheory/Constructions/BorelSpace/Order.lean,Mathlib/Order/CompleteLattice/Basic.lean,Mathlib/Order/ConditionallyCompleteLattice/Indexed.lean,Mathlib/Order/ConditionallyCompletePartialOrder/Indexed.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/Lift.lean,Mathlib/Order/Lattice/Nat.lean |
14 |
4 |
['github-actions', 'mathlib-merge-conflicts'] |
bryangingechen assignee:bryangingechen |
8-85282 8 days ago |
9-1813 9 days ago |
83-42006 83 days |
| 41685 |
plp127 author:plp127 |
feat: free modular lattice on three generators |
We define `FreeModLatThree`, the free modular lattice on three generators, as an inductive type and prove the universal property.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order
t-data
|
587/0 |
Mathlib.lean,Mathlib/Data/FreeModLatThree.lean |
2 |
6 |
['alreadydone', 'github-actions', 'plp127'] |
nobody |
8-84403 8 days ago |
8-84403 8 days ago |
12-21704 12 days |
| 39110 |
SnirBroshi author:SnirBroshi |
chore(Data/Set): reduce defeq abuse of `Set α = α → Prop` |
These are among the first places that would fail if `Set α` wasn't defeq to `α → Prop`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
35/20 |
Mathlib/Data/Set/Basic.lean,Mathlib/Data/Set/Defs.lean,Mathlib/Data/Set/Insert.lean,Mathlib/Data/Set/Prod.lean,Mathlib/Order/BooleanAlgebra/Set.lean |
5 |
27 |
['SnirBroshi', 'Vierkantor', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts', 'themathqueen', 'urkud', 'vihdzp'] |
TwoFX assignee:TwoFX |
8-84296 8 days ago |
9-1210 9 days ago |
77-27101 77 days |
| 41872 |
plp127 author:plp127 |
chore(NumberTheory/Niven): generalize theorems |
Move some theorems out of the Niven's theorem file and generalize them.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
31/19 |
Mathlib/NumberTheory/Niven.lean,Mathlib/RingTheory/IntegralClosure/IsIntegral/Basic.lean,Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean,Mathlib/RingTheory/Polynomial/RationalRoot.lean |
4 |
1 |
['github-actions'] |
nobody |
8-82823 8 days ago |
8-83969 8 days ago |
8-84041 8 days |
| 41871 |
stalex444 author:stalex444 |
feat(RingTheory/IntegralClosure): integer powers of integral elements are integral |
This PR adds IsIntegral.zpow and its subalgebra-membership analogs (zpow_mem, zpow_mem_adjoin, Algebra.IsIntegral.zpow_mem), generalizing the existing inv lemmas from the −1 power to all integer powers.
This Lean code was drafted with the help of AI (Claude Code), I reviewed it and built it locally against the current master.
---
Happy to adjust the placement or the type-variable names.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
LLM-generated
new-contributor
|
20/0 |
Mathlib/RingTheory/IntegralClosure/IsIntegralClosure/Basic.lean |
1 |
9 |
['SnirBroshi', 'github-actions', 'stalex444'] |
nobody |
8-81604 8 days ago |
9-2991 9 days ago |
9-2871 9 days |
| 38039 |
themathqueen author:themathqueen |
chore(Topology): `UniformSpace.Completion` renames for morphisms |
This PR renames the following `UniformSpace.Completion` morphisms.
The `UniformSpace` namespace remains for ring morphisms and functions so that we're clear which completion we're talking about. For isometries, `UniformEquiv`s, `NormedAddGroupHom`s, there's no need for the `UniformSpace` namespace.
For the isometry definitions, we used `Isometry.ringHom{FromCompletion, Completion}` instead of `RingHom.Isometry.{fromCompletion, completion}` so that it won't clash with the function versions (`Isometry.{fromCompletion, completion}`).
RingHom
- [ ] `UniformSpace.Completion.mapRingHom` -> `UniformSpace.RingHom.toCompletion`
- [ ] `UniformSpace.Completion.extensionHom` -> `UniformSpace.RingHom.fromCompletion`
RingEquiv
- [ ] `UniformSpace.Completion.mapRingEquiv` -> `UniformSpace.RingEquiv.completion`
NormedAddGroupHom
- [ ] `NormedAddGroupHom.extension` -> `NormedAddGroupHom.fromCompletion`
RingHom isometries
- [ ] `Isometry.extensionHom` -> `Isometry.ringHomFromCompletion`
- [ ] `Isometry.mapRingHom` -> `Isometry.ringHomCompletion`
isometries
- [ ] `Isometry.completion_extension` -> `Isometry.fromCompletion`
- [ ] `Isometry.completion_map` -> `Isometry.completion`
Functions
- [ ] `UniformSpace.Completion.extension` -> `UniformSpace.Function.fromCompletion`
- [ ] `UniformSpace.Completion.map` -> `UniformSpace.Function.completion`
UniformEquiv
- [ ] `UniformSpace.Completion.mapEquiv` -> `UniformEquiv.completion`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
See Zulip thread: [#mathlib4 > naming convention: `UniformSpace.Completion` morphisms](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/naming.20convention.3A.20.60UniformSpace.2ECompletion.60.20morphisms)
[](https://gitpod.io/from-referrer/)
|
t-topology
tech debt
|
385/230 |
Mathlib/Analysis/InnerProductSpace/Completion.lean,Mathlib/Analysis/Normed/Field/WithAbs.lean,Mathlib/Analysis/Normed/Group/Completion.lean,Mathlib/Analysis/Normed/Group/HomCompletion.lean,Mathlib/Analysis/Normed/Group/SemiNormedGrp/Completion.lean,Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean,Mathlib/NumberTheory/NumberField/Completion/InfinitePlace.lean,Mathlib/NumberTheory/NumberField/Completion/LiesOverInstances.lean,Mathlib/NumberTheory/Padics/Complex.lean,Mathlib/NumberTheory/Padics/HeightOneSpectrum.lean,Mathlib/NumberTheory/Padics/WithVal.lean,Mathlib/RingTheory/DedekindDomain/AdicValuation.lean,Mathlib/RingTheory/LaurentSeries.lean,Mathlib/Topology/Algebra/GroupCompletion.lean,Mathlib/Topology/Algebra/LinearMapCompletion.lean,Mathlib/Topology/Algebra/UniformMulAction.lean,Mathlib/Topology/Algebra/UniformRing.lean,Mathlib/Topology/Algebra/Valued/ValuedField.lean,Mathlib/Topology/Algebra/Valued/WithVal.lean,Mathlib/Topology/Category/UniformSpace.lean,Mathlib/Topology/MetricSpace/Completion.lean,Mathlib/Topology/UniformSpace/Completion.lean |
22 |
8 |
['github-actions', 'j-loreaux', 'mathlib-merge-conflicts', 'themathqueen'] |
ADedecker assignee:ADedecker |
8-79572 8 days ago |
8-80972 8 days ago |
27-77070 27 days |
| 41813 |
sqrt-of-2 author:sqrt-of-2 |
feat(LinearAlgebra): totally nonnegative matrices |
Define totally nonnegative matrices and add a basic API.
A matrix is totally nonnegative if all its finite minors have nonnegative determinant.
From RealRooted
Co-authored-by: Yaël Dillies <yael.dillies@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebra
maintainer-merge
label:t-algebra$ |
115/1 |
Mathlib.lean,Mathlib/Data/Set/Finite/Range.lean,Mathlib/LinearAlgebra/Matrix/Determinant/TotallyNonneg.lean,Mathlib/Order/Hom/Set.lean |
4 |
17 |
['Vierkantor', 'YaelDillies', 'github-actions', 'sqrt-of-2', 'vlad902'] |
nobody |
8-75437 8 days ago |
8-78312 8 days ago |
9-1387 9 days |
| 40624 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Finite): `Set.ncard` of `neighborSet` |
Since #39414 the simpNF of the cardinality of `neighborSet` uses `Set.ncard` rather than `Fintype.card`, therefore we import `Set.ncard` into `SimpleGraph/Finite.lean` and show `(G.neighborSet v).ncard = G.degree v`.
Also includes some other results that benefit from the import/lemma:
- `(commonNeighbors ⊤ u v).encard = ENat.card V - 2`
- `(G.map f).degree (f v) = G.degree v` for an injective `f`
- `G'.degree (f v) = G.degree v` for `f : G ↪g G'`, given `G'.neighborSet (f v) ⊆ Set.range f`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
large-import
|
44/7 |
Mathlib/Combinatorics/SimpleGraph/Finite.lean,Mathlib/Combinatorics/SimpleGraph/IncMatrix.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean |
3 |
1 |
['github-actions'] |
nobody |
8-71496 8 days ago |
41-31400 41 days ago |
41-31280 41 days |
| 41611 |
SnirBroshi author:SnirBroshi |
chore(Data/Seq/Computation): golf using `grind` |
---
- `LiftRel.refl`: ? to 12ms
- `LiftRel.symm`: 10ms to 16ms
- `LiftRel.trans`: 13ms to 23ms
- `LiftRel.imp`: 11ms to 19ms
- `terminates_of_liftRel`: 14ms to 14ms
- `rel_of_liftRel`: 11ms to 15ms
- `liftRel_of_mem`: ? to 22ms
- `liftRel_def`: 20ms to 60ms
- `liftRel_bind`: 40ms to 55ms
- `liftRel_pure_left`: 15ms to 33ms
- `liftRel_think_left`: ? to 40ms
- `liftRel_congr`: ? to 35ms
- `LiftRelAux.ret_left`: 18ms to 18ms
(the question marks mean that `trace.profiler` doesn't output anything, maybe they're below 1ms?)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
28/85 |
Mathlib/Data/Seq/Computation.lean |
1 |
5 |
['SnirBroshi', 'github-actions', 'grunweg', 'leanprover-radar'] |
nobody |
8-69010 8 days ago |
8-70561 8 days ago |
9-20645 9 days |
| 37848 |
rwst author:rwst |
feat(RingTheory/PowerSeries/Log): log and exp as inverses |
This adds the lemmas `exp_subst_log` and `log_subst_exp_sub_one`, together with two helpers needed for the proofs.
Note: I'm using Claude + Opus for supervised formalization tasks. Claude has no permission to use git on my machine.
-[ ] depends on #40571
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
LLM-generated
|
91/0 |
Mathlib/RingTheory/PowerSeries/Log.lean,Mathlib/RingTheory/PowerSeries/Substitution.lean |
2 |
17 |
['chrisflav', 'github-actions', 'rwst', 'yuanyi-350'] |
jjdishere assignee:jjdishere |
8-67149 8 days ago |
43-17400 43 days ago |
106-64922 106 days |
| 38194 |
ryanncode author:ryanncode |
feat(LinearAlgebra/BilinearForm): add indefinite metrics |
Add the `IndefiniteMetric` structure to support vector spaces equipped with a non-degenerate, symmetric, indefinite bilinear form.
Provide the algebraic foundation for indefinite inner product spaces by formalizing the metric via `LinearMap.BilinForm` and extracting its associated quadratic form without enforcing the `IsPosSemidef` typeclass.
Previously, mathlib required strictly positive-definite metrics to instantiate inner product spaces (`InnerProductSpace`), which prevented the formalization of indefinite geometries without causing typeclass inference failures. Bridge this gap by isolating the symmetric bilinear form from topological and positivity constraints, allowing the library to handle generalized indefinite metric spaces safely.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
47/0 |
Mathlib.lean,Mathlib/LinearAlgebra/BilinearForm/IndefiniteMetric.lean |
2 |
5 |
['dagurtomas', 'github-actions', 'mathlib-merge-conflicts', 'ryanncode'] |
eric-wieser assignee:eric-wieser |
8-67149 8 days ago |
64-24075 64 days ago |
79-80124 79 days |
| 38821 |
Jun2M author:Jun2M |
feat(Data/List): rotation of sublist is sublist of rotation |
This PR proves `(∃ L₁ : List α, L ~r L₁ ∧ L₁ <+ L') ↔ (∃ L₂ : List α, L <+ L₂ ∧ L₂ ~r L')`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
10/0 |
Mathlib/Data/List/Rotate.lean |
1 |
3 |
['SnirBroshi', 'eric-wieser', 'github-actions'] |
eric-wieser assignee:eric-wieser |
8-67146 8 days ago |
85-84563 85 days ago |
85-84443 85 days |
| 39117 |
joelriou author:joelriou |
feat(CategoryTheory): the right derived functor commutes with the shift |
A few lemmas are obtained about precomposing and postcomposing left/right Kan extensions or right/left derived functors with equivalences of categories. By applying these results to the equivalences given by shifts, we construct a family of isomorphisms which shows that the right derived functor commutes with shifts, and by proving certain compatibilities, we obtain a `Functor.CommShift` instance on the right derived functor of a functor which commutes with shifts.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
large-import
|
426/9 |
Mathlib.lean,Mathlib/CategoryTheory/Functor/Derived/LeftDerived.lean,Mathlib/CategoryTheory/Functor/Derived/RightDerived.lean,Mathlib/CategoryTheory/Functor/Derived/RightDerivedCommShift.lean,Mathlib/CategoryTheory/Functor/KanExtension/AdjunctionPreserves.lean,Mathlib/CategoryTheory/Functor/KanExtension/Basic.lean,Mathlib/CategoryTheory/Shift/CommShift.lean,Mathlib/CategoryTheory/Shift/Localization.lean |
8 |
16 |
['dagurtomas', 'github-actions', 'joelriou', 'mathlib-merge-conflicts', 'robin-carlier'] |
kim-em assignee:kim-em |
8-67144 8 days ago |
9-40825 9 days ago |
47-86225 47 days |
| 39366 |
akiezun author:akiezun |
feat(Data/Nat): add prime divisibility for ascFactorial and choose |
Adds two prime-divisibility lemmas for natural-number factorial/binomial APIs.
The first characterizes when a prime divides an ascending factorial:
`Nat.Prime.dvd_ascFactorial_iff`.
The second applies this to binomial coefficients:
`Nat.Prime.dvd_choose_add_sub_one_iff`, using
`Nat.ascFactorial_eq_factorial_mul_choose'` and cancellation of the `n!` factor
when `n < p`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
large-import
|
46/0 |
Mathlib.lean,Mathlib/Data/Nat/Choose/Consecutive.lean,Mathlib/Data/Nat/Factorial/BigOperators.lean |
3 |
9 |
['SnirBroshi', 'akiezun', 'github-actions', 'wwylele'] |
TwoFX assignee:TwoFX |
8-67143 8 days ago |
69-5025 69 days ago |
73-15284 73 days |
| 39504 |
WenrongZou author:WenrongZou |
feat(MvPowerSeries/Ideal): kernel of map equals map `C` of kernel |
In this PR, we prove that given a ring homomorphism f, suppose that kernel of f is finitely generated, then kernel of map equals map `C` of kernel. (See `ker_map_of_FG`).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
87/0 |
Mathlib.lean,Mathlib/RingTheory/MvPowerSeries/Ideal.lean |
2 |
6 |
['CoolRmal', 'WenrongZou', 'github-actions'] |
mattrobball assignee:mattrobball |
8-67142 8 days ago |
23-25775 23 days ago |
70-27930 70 days |
| 39567 |
AlexBrodbelt author:AlexBrodbelt |
feat(Mathlib/Data/Finite/Option): option type is finite iff type is finite |
Option type is finite if and only if the type is finite.
This is an intermediate result to proving that if the `GroupWithZero` is (in)finite then the `Units` are (in)finite.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
25/0 |
Mathlib.lean,Mathlib/Data/Finite/Option.lean |
2 |
14 |
['AlexBrodbelt', 'github-actions', 'plp127', 'themathqueen'] |
eric-wieser assignee:eric-wieser |
8-67140 8 days ago |
68-33570 68 days ago |
68-34064 68 days |
| 40006 |
tautschnig author:tautschnig |
feat(Data/ZMod/Basic): idempotents in ZMod (p^d) are exactly {0, 1} |
Add sq_eq_self_iff_eq_zero_or_one: in ZMod (p^d) for prime p and d > 0, x^2 = x iff x = 0 or x = 1.
This generalises eq_zero_or_one_of_sq_eq_self (which requires CancelMonoidWithZero, i.e., no zero divisors) to the prime-power case. ZMod (p^d) has zero divisors for d >= 2, so the mul_left_injective₀ argument used by the existing lemma does not apply. The proof works by lifting to ℕ, using that if gcd(a, b) = 1 and p^d | a*b then p^d divides one of a or b (by Euclid's lemma), then noting that a = x.val and b = x.val - 1 are consecutive naturals and hence coprime.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
new-contributor
|
56/0 |
Mathlib/Data/ZMod/Basic.lean |
1 |
3 |
['Julian-Kuelshammer', 'github-actions'] |
TwoFX assignee:TwoFX |
8-67139 8 days ago |
58-36261 58 days ago |
58-36836 58 days |
| 40023 |
chenson2018 author:chenson2018 |
chore(AlgebraicTopology): refactor proofs where `grind?` fails |
These are sources of technical debt as now reported in the [weekly linting report](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log/with/544658968). The idea is that a successful grind proof can fail to report the theorems it used via grind?, which means that if these proofs break across toolchains that it becomes significantly harder to repair.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology
will-close-soon
|
11/5 |
Mathlib/AlgebraicTopology/SimplexCategory/DeltaZeroIter.lean,Mathlib/AlgebraicTopology/SimplexCategory/GeneratorsRelations/NormalForms.lean,Mathlib/AlgebraicTopology/SimplicialSet/NonDegenerateSimplices.lean,Mathlib/AlgebraicTopology/SimplicialSet/NonDegenerateSimplicesSubcomplex.lean |
4 |
4 |
['chenson2018', 'github-actions', 'grunweg', 'joelriou'] |
robin-carlier assignee:robin-carlier |
8-67138 8 days ago |
58-10605 58 days ago |
58-10485 58 days |
| 41109 |
Deicyde author:Deicyde |
feat(Geometry/Manifold): add `ModelWithCorners.MfldCat`, the category of `C^n` manifolds on a fixed model |
Adds `ModelWithCorners.MfldCat I n`, the category of `C^n` manifolds modeled on a fixed model with corners `I`, together with its forgetful functor to `TopCat`.
Suggested by @chrisflav. See #38223 and the [Zulip Thread](https://leanprover.zulipchat.com/#narrow/channel/144837-PR-reviews/topic/.2338223.20The.20Category.20of.20C.5En.20Manifolds/with/586321835) for more discussion of why this is necessary.
Boilerplate based on Yaël Dillies's `Mathlib.Algebra.Category.CommBialgCat`. This PR was prepared with assistance from Claude Code. |
t-differential-geometry |
167/0 |
Mathlib.lean,Mathlib/Geometry/Manifold/Category/MfldCat/OfModel.lean |
2 |
2 |
['Deicyde', 'github-actions', 'jkandel1'] |
ocfnash assignee:ocfnash |
8-67135 8 days ago |
28-85611 28 days ago |
28-85703 28 days |
| 41228 |
joelriou author:joelriou |
feat(Algebra/ModuleCat/Differentials/Presheaf): the presheaf of relative differentials |
Given a functor `F : C ⥤ D`, presheaves of commutative rings `S`, `R` and a morphism `φ : S ⟶ F.op ⋙ R`, we show that derivations relative to `φ` are representable by a presheaf of `R`-modules.
This is obtained by reducing to the case of absolute differentials. The construction shall allow to deduce the presheaf version of the cokernel sequence $$f^\star \Omega_{Y/S} ⟶ \Omega_{X/S} ⟶ \Omega_{X/Y} ⟶ 0$$ when `f : X ⟶ Y` and `g : Y ⟶ S` are morphisms of schemes.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
t-category-theory
t-algebra
large-import
label:t-algebra$ |
458/21 |
Mathlib/Algebra/Category/ModuleCat/Differentials/Presheaf.lean |
1 |
1 |
['github-actions'] |
kim-em assignee:kim-em |
8-67133 8 days ago |
25-38947 25 days ago |
25-38827 25 days |
| 41232 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): equivalence between the various definitions of sharply smaller regular cardinals |
---
- [x] depends on: #40937
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
366/16 |
Mathlib/CategoryTheory/Comma/CardinalArrow.lean,Mathlib/CategoryTheory/Presentable/Basic.lean,Mathlib/CategoryTheory/Presentable/SharplyLT/Basic.lean,Mathlib/Order/Monotone/Defs.lean |
4 |
17 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'smorel394'] |
kim-em assignee:kim-em |
8-67132 8 days ago |
9-29992 9 days ago |
21-54625 21 days |
| 38380 |
wrenna-robson author:wrenna-robson |
feat(Data/Set): add `Set.diag` |
Introduces `Set.diag (s : Set α) : Set (α × α) = {(a, a) | a ∈ s}` as the set-level companion to `Set.offDiag`, mirroring the existing `Finset.diag` / `Finset.offDiag` pairing. The type-level `Set.diagonal : Type* → Set (α × α)` is retained unchanged; `diag_univ : (univ : Set α).diag = diagonal α` (`@[simp]`) keeps it canonical when the underlying set is `univ`.
Parallels to the existing `offDiag` API (`diag_mono`, `diag_nonempty`, `diag_eq_empty`, `diag_empty`, `diag_singleton`, `diag_subset_prod`, `diag_eq_sep_prod`, `diag_inter`, `diag_union`, `diag_insert`) plus bridges `diag_union_offDiag`, `disjoint_diag_offDiag`, `prod_sdiff_diag`, `prod_sdiff_offDiag`. Also `diag_eq_image`, `image_diag` (matching `Finset.image_diag`), `preimage_coe_coe_diag`, and `Finset.coe_diag`. Note `diag_union` and `diag_insert` are unconditional (no `Disjoint` / `a ∉ s` hypothesis).
To free the `diag_` prefix for the set sense, the existing lemmas about the diagonal *map* `fun x => (x, x)` are renamed with deprecation aliases:
`range_diag` → `range_diagMap`, `diag_preimage_prod` → `diagMap_preimage_prod`, `diag_preimage_prod_self` → `diagMap_preimage_prod_self`. `diag_image` and `preimage_coe_coe_diagonal` are marked `@[deprecated]`.
This PR was prepared with the assistance of Claude Opus. |
t-data
LLM-generated
|
117/20 |
Mathlib/Data/Finset/Prod.lean,Mathlib/Data/Set/Operations.lean,Mathlib/Data/Set/Prod.lean,Mathlib/MeasureTheory/MeasurableSpace/Constructions.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/Compactness/Lindelof.lean,Mathlib/Topology/MetricSpace/Infsep.lean,Mathlib/Topology/NhdsSet.lean |
8 |
3 |
['github-actions', 'wrenna-robson'] |
nobody |
8-66247 8 days ago |
30-42581 30 days ago |
94-36061 94 days |
| 41536 |
Mathias-Stout author:Mathias-Stout |
chore(Algebra): make quaternion directory |
We create separate directory for quaternions and move the two existing files into it.
This prepares a follow-up PR proving that quaternions are central simple.
Co-authored-by: Justus Springer <justusspringer@gmx.de>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
file-removed
new-contributor
|
7/7 |
Mathlib.lean,Mathlib/Algebra/DualQuaternion.lean,Mathlib/Algebra/Quaternion/Basic.lean,Mathlib/Algebra/Quaternion/Basis.lean,Mathlib/Analysis/Quaternion.lean,Mathlib/LinearAlgebra/CliffordAlgebra/Equivs.lean,MathlibTest/Quaternion.lean |
7 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
8-63449 8 days ago |
8-64267 8 days ago |
16-23181 16 days |
| 41649 |
xroblot author:xroblot |
feat(FieldTheory/IntermediateField): adjoining a shifted or scaled generator |
Add two lemmas about simple intermediate field extensions:
* `IntermediateField.adjoin_simple_add_algebraMap`: `F⟮x + algebraMap F E y⟯ = F⟮x⟯` for `y` in the base field `F`.
* `IntermediateField.adjoin_simple_mul_algebraMap`: `F⟮x * algebraMap F E y⟯ = F⟮x⟯` for `y` a nonzero element of `F`.
Translating the generator by a base-field element, or scaling it by a nonzero base-field element, leaves the simple extension unchanged.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
21/0 |
Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
8-60663 8 days ago |
14-23808 14 days ago |
14-23688 14 days |
| 40636 |
xroblot author:xroblot |
feat(RingTheory/FractionalIdeal): IsMulTorsionFree instance |
- Adds `FractionalIdeal.isMulTorsionFree_of_le_nonZeroDivisors`: if `S ≤ R⁰` and `[IsMulTorsionFree (Ideal R)]`, then `IsMulTorsionFree (FractionalIdeal S P)`.
- Derives `FractionalIdeal.instIsMulTorsionFree` for the fraction field case (`S = R⁰`).
Also adds a discoverability note in `DedekindDomain/Ideal/Basic.lean` pointing to `Mathlib.Algebra.GroupWithZero.Torsion` for the `IsMulTorsionFree (Ideal A)` instance (hence also `IsMulTorsionFree (FractionalIdeal A⁰ K)`).
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-ring-theory |
44/0 |
Mathlib/RingTheory/DedekindDomain/Ideal/Basic.lean,Mathlib/RingTheory/FractionalIdeal/Operations.lean |
2 |
1 |
['github-actions'] |
nobody |
8-60351 8 days ago |
15-22835 15 days ago |
15-22759 15 days |
| 40905 |
xroblot author:xroblot |
feat(FieldTheory): the compositum of two abelian extensions is abelian |
This adds:
* `AlgEquiv.ker_restrictNormalHom`: the kernel of the restriction homomorphism
`Gal(K₁/F) →* Gal(E/F)` is the fixing subgroup of the image of `E` in `K₁`.
* `IntermediateField.restrictNormalHomSupProd`: the embedding
`Gal(↑(K ⊔ L)/F) →* Gal(K/F) × Gal(L/F)`, `σ ↦ (σ|_K, σ|_L)`, for normal `K`, `L`.
* `IsAbelianGalois.sup`: the compositum of two abelian extensions is abelian.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
63/0 |
Mathlib/FieldTheory/Galois/Abelian.lean,Mathlib/FieldTheory/Galois/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
8-60272 8 days ago |
31-42759 31 days ago |
31-42665 31 days |
| 40864 |
xroblot author:xroblot |
feat(RingTheory/Localization/FractionRing): add IsFractionRing.fixingSubgroup_range_algebraMap |
Adds `IsFractionRing.fixingSubgroup_range_algebraMap`: if `K` and `L` are the fraction fields of `A` and `B` with `A ⊆ B`, then for `G` acting on `B` and on `L`, the fixing subgroup of (the image of) `A` in `B` equals the fixing subgroup of `K` in `L`.
This lemma was split out of #38864, and is used here to golf the proof of `IsGaloisGroup.fixingSubgroup_range_algebraMap`.
|
t-ring-theory |
24/14 |
Mathlib/FieldTheory/Galois/IsGaloisGroup.lean,Mathlib/RingTheory/Localization/FractionRing.lean |
2 |
1 |
['github-actions'] |
nobody |
8-60233 8 days ago |
35-17537 35 days ago |
35-18307 35 days |
| 40301 |
xroblot author:xroblot |
feat(RingTheory/UniqueFactorizationDomain): add emultiplicity characterizations |
Adds characterizations of primality, vanishing, associatedness and equality in `WfDvdMonoid`/`UniqueFactorizationMonoid` in terms of `emultiplicity`:
- `Prime.emultiplicity_self`, `Prime.emultiplicity_prime`
- `WfDvdMonoid.eq_zero_iff_forall_prime_pow_dvd`, `WfDvdMonoid.ne_zero_iff_finiteMultiplicity`
- `UniqueFactorizationMonoid.associated_iff_emultiplicity_eq(')`, `UniqueFactorizationMonoid.eq_iff_emultiplicity_eq`
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-ring-theory |
67/0 |
Mathlib/RingTheory/UniqueFactorizationDomain/Multiplicity.lean |
1 |
1 |
['github-actions'] |
nobody |
8-59833 8 days ago |
15-22934 15 days ago |
23-39796 23 days |
| 40302 |
xroblot author:xroblot |
feat(Data/Nat/Digits): add digitsAppend API lemmas and List.mapIdx_replicate |
Adds some lemmas about `Nat.digitsAppend` and `List.mapIdx_replicate`:
These complete the basic API around `Nat.digitsAppend` (already in Mathlib) that is needed downstream to relate it to `Nat.digits` and to sums indexed via `List.mapIdx`.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-data |
50/0 |
Mathlib/Data/List/Indexes.lean,Mathlib/Data/Nat/Digits/Lemmas.lean |
2 |
1 |
['github-actions'] |
nobody |
8-59808 8 days ago |
48-11915 48 days ago |
48-11965 48 days |
| 40557 |
xroblot author:xroblot |
feat(RingTheory/Ideal): generalize span_singleton_dvd_span_singleton_iff_dvd and emultiplicity_eq_emultiplicity_span |
Move `Ideal.span_singleton_dvd_span_singleton_iff_dvd` from
`Mathlib.RingTheory.DedekindDomain.Ideal.Lemmas` to
`Mathlib.RingTheory.Ideal.Operations`. The result holds for any `CommSemiring` — the `[IsPrincipalIdealRing R]` hypothesis was not needed.
Generalize `Ideal.emultiplicity_eq_emultiplicity_span` from
`[IsDomain R] [IsPrincipalIdealRing R]` to `[CommRing R]`. The proof simplifies considerably: it follows immediately from `emultiplicity_eq_emultiplicity_iff` and the generalized dvd lemma.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-ring-theory |
29/26 |
Mathlib/RingTheory/DedekindDomain/Ideal/Lemmas.lean,Mathlib/RingTheory/Ideal/Operations.lean |
2 |
3 |
['Multramate', 'github-actions', 'xroblot'] |
nobody |
8-59398 8 days ago |
44-5995 44 days ago |
44-5875 44 days |
| 41849 |
ZRTMRH author:ZRTMRH |
feat(Combinatorics/Quiver/Path): add `Quiver.Reachable` |
Add `Quiver.Reachable a b`, the existence of a directed path from `a` to `b`, together with its basic preorder API (`@[refl]`/`@[trans]`) and `Path.reachable`/`Hom.reachable`.
Unlike `SimpleGraph.Reachable`, this is only a preorder, not an equivalence, since quiver paths are directed; the symmetric notion is reachability in `Symmetrify V`.
---
This will be used by #38310 (where it was suggested in review).
This PR was written with AI assistance (Claude). The code has been reviewed by the author.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
LLM-generated
maintainer-merge
|
40/1 |
Mathlib/Combinatorics/Quiver/Path.lean |
1 |
16 |
['SnirBroshi', 'YaelDillies', 'ZRTMRH', 'github-actions', 'robin-carlier'] |
nobody |
8-53528 8 days ago |
8-57009 8 days ago |
9-43189 9 days |
| 40182 |
Thmoas-Guan author:Thmoas-Guan |
feat(RingTheory): add lemma for span rank of maximal ideal under surjection |
In this PR, we added the following result : for noetherian local ring `(R, m, k)`, the span rank of maximal ideal of `R/I` adding `k` dimension of `I+m^2/m^2` is equal to span rank of maximal ideal of `R`.
This would be useful when dealing with regular local ring and quotient within `m^2`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
52/0 |
Mathlib/Algebra/Module/SpanRankOperations.lean,Mathlib/RingTheory/Ideal/Cotangent.lean,Mathlib/RingTheory/LocalRing/ResidueField/Basic.lean |
3 |
1 |
['github-actions'] |
nobody |
8-33939 8 days ago |
53-23676 53 days ago |
53-23556 53 days |
| 25841 |
mitchell-horner author:mitchell-horner |
feat(Combinatorics/SimpleGraph): prove the Kővári–Sós–Turán theorem |
Prove the Kővári–Sós–Turán theorem (an upper bound on the Zarankiewicz function)
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #19865
- [x] depends on: #20738
- [x] depends on: #27602
- [x] depends on: #34633
[](https://gitpod.io/from-referrer/)
---
*This PR continues the work from #20240.*
*Original PR: https://github.com/leanprover-community/mathlib4/pull/20240* |
t-combinatorics |
244/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/Extremal/KovariSosTuran.lean,docs/1000.yaml |
3 |
13 |
['SnirBroshi', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'mitchell-horner'] |
kmill assignee:kmill |
8-33368 8 days ago |
8-33926 8 days ago |
46-24831 46 days |
| 40400 |
seewoo5 author:seewoo5 |
feat(Algebra/Order/Floor): hermite identity for floor function |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[Hermite's identity](https://en.wikipedia.org/wiki/Hermite%27s_identity) for floor function. Usually stated over real numbers, but it also holds for "floor field". Initially done by Claude Opus 4.7, and later golfed by myself. Proved as a part of personal project.
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
75/0 |
Mathlib.lean,Mathlib/Algebra/Order/Floor/Hermite.lean |
2 |
7 |
['b-mehta', 'github-actions', 'seewoo5', 'themathqueen'] |
nobody |
8-21954 8 days ago |
46-57982 46 days ago |
47-28097 47 days |
| 41889 |
Ljon4ik4 author:Ljon4ik4 |
chore: corrected namespace of ker_mapOfCompatibleSMul in the docstring of mapOfCompatibleSMul_surjective |
The Lemma `TensorProduct.mapOfCompatibleSMul_surjective` contained a wrong reference to `TensorProduct.AlgebraTensorModule.ker_mapOfCompatibleSMul` (it was missing the `AlgebraTensorModule`). That is corrected in this PR.
(Sorry if that is to minor for a PR !)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
1/1 |
Mathlib/LinearAlgebra/TensorProduct/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
8-19177 8 days ago |
8-21137 8 days ago |
8-21017 8 days |
| 41887 |
Ljon4ik4 author:Ljon4ik4 |
feat: lemmas showing properties of ofDerivation added |
Given an `R`-Lie algebra `L` and a commutative `R`-algebra `A`, there is a Lie algebra structure on `(A ⊗[R] L)`.
A derivation of `A` induces a Lie derivation of `(A ⊗[R] L)`, and one obtains a Lie algebra map
```
ofDerivation : Derivation R A A →ₗ⁅R⁆ LieDerivation R (A ⊗[R] L) (A ⊗[R] L)
```
In this PR we add a Lemma showing that `ofDerivation` is in fact `A`-linear, and that the resulting LieDerivation satisfies a Leibniz rule with respect to the `A`-multiplication on `A ⊗[R] L`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
13/0 |
Mathlib/Algebra/Lie/Derivation/BaseChange.lean |
1 |
1 |
['github-actions'] |
nobody |
8-17450 8 days ago |
8-17995 8 days ago |
8-20851 8 days |
| 39307 |
FordUniver author:FordUniver |
feat(Combinatorics/SimpleGraph/Copy): introduce `UnlabeledCopy` carrier subtype |
Adds `abbrev UnlabeledCopy A B := {B' : B.Subgraph // Nonempty (A ≃g B'.coe)}` and uses it to replace the previous inline filter-set body of `copyCount G H`. Drops the now unused legacy Finset-image bridge `copyCount_eq_card_image_copyToSubgraph`. Adds `uniqueUnlabeledCopyBot` instance so `copyCount_bot` is a one-liner via `Fintype.card_unique`.
Co-authored-by: Malte Jackisch <45597826+MaltyBlanket@users.noreply.github.com>
---
**Step 1/5 of the `Copy` / `InducedCopy` refactor-feat stack.**
This PR isolates the `UnlabeledCopy` type introduction and the count's type-form redefinition from the larger rename/convention work in the rest of the stack. Note that resolving the current clash in naming (`Copy` and `UnlabeledCopy` vs `labelledCopyCount` and `copyCount`) is part of #38745.
|
t-combinatorics |
28/24 |
Mathlib/Combinatorics/SimpleGraph/Copy.lean |
1 |
26 |
['FordUniver', 'SnirBroshi', 'YaelDillies', 'b-mehta', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'mitchell-horner'] |
nobody |
8-14177 8 days ago |
9-12873 9 days ago |
63-33049 63 days |
| 41567 |
kim-em author:kim-em |
doc: fix TFAE list rendering in Rees theorem module docstring |
This PR fixes the module docstring of `Mathlib/RingTheory/Depth/Rees.lean`: the four TFAE items used `·`, which is not a markdown list marker, so they rendered as a single run-on paragraph on doc-gen. Replace them with proper `*` sub-list items, add the missing "and nontrivial" to the first item to match the Lean statement, and drop the unused binder name `Nfin` in `subsingleton_ext_of_exists_isRegular`.
Follow-up to [#26212 (feat(Algebra): the Rees theorem for depth)](https://github.com/leanprover-community/mathlib4/pull/26212), where the reviewer deferred checking the rendered docs to after the merge.
🤖 Prepared with Claude Code
|
t-ring-theory
LLM-generated
|
6/5 |
Mathlib/RingTheory/Depth/Rees.lean |
1 |
1 |
['github-actions'] |
nobody |
8-12619 8 days ago |
8-12675 8 days ago |
8-12555 8 days |
| 41570 |
kim-em author:kim-em |
doc: fix and add docstrings in RingTheory/Invariant/Galois |
This PR fixes the docstring of `Ideal.Quotient.normal`, which was copy-pasted from `Ideal.Quotient.exists_algHom_fixedPoint_quotient_under` and did not describe the statement `Normal (A ⧸ P) (B ⧸ Q)`, and add docstrings to `Ideal.IsFractionRing.normal` and `Ideal.IsFractionRing.finite_of_isInvariant`, matching the phrasing of the sibling results in `RingTheory/Invariant/Basic.lean`.
Follow-up to [#40247 (feat(RingTheory/Invariant/Basic): generalize `Ideal.Quotient.normal` to `IsFractionRing`)](https://github.com/leanprover-community/mathlib4/pull/40247).
🤖 Prepared with Claude Code
|
t-ring-theory
LLM-generated
|
5/3 |
Mathlib/RingTheory/Invariant/Galois.lean |
1 |
1 |
['github-actions'] |
nobody |
8-12618 8 days ago |
8-12645 8 days ago |
8-12525 8 days |
| 41576 |
kim-em author:kim-em |
chore: use uniqueDiffOn_uIcc at existing call sites |
This PR replaces five inline proofs of `UniqueDiffOn ℝ [[a, b]]` (via `uniqueDiffOn_Icc (by grind)` or `uniqueDiffOn_Icc (inf_lt_sup.mpr h_ne)`) with the dedicated lemma `uniqueDiffOn_uIcc`, at four call sites in `Mathlib/Analysis/Calculus/Taylor.lean` and one in `Mathlib/MeasureTheory/Integral/IntervalIntegral/TrapezoidalRule.lean`.
Follow-up to [#40702 (feat(Analysis/Calculus): add uniqueDiffOn_uIcc)](https://github.com/leanprover-community/mathlib4/pull/40702).
🤖 Prepared with Claude Code
|
t-measure-probability
LLM-generated
|
5/5 |
Mathlib/Analysis/Calculus/Taylor.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/TrapezoidalRule.lean |
2 |
1 |
['github-actions'] |
nobody |
8-12245 8 days ago |
8-12245 8 days ago |
8-12125 8 days |
| 41583 |
kim-em author:kim-em |
chore: move simple_obj into Functor namespace, golf proofs, tidy docstring |
This PR moves `CategoryTheory.simple_obj` and `CategoryTheory.simple_obj_iff` into the `Functor` namespace (matching their sibling `Functor.simple_of_simple_obj` and enabling dot notation), golf `Functor.simple_obj` and the forward direction of `isSimpleModule_iff_eq_zero_or_injective` via the existing `LinearMap.injective_or_eq_zero`, remove unused `variable` binders in `RingTheory/SimpleRing/DivisionRing.lean`, and fix inverted heading levels and an "an unique" typo in that file's module docstring. The one call site of the renamed lemmas is updated; no deprecated aliases are added since the declarations merged a week ago.
Follow-up to [#41233 (feat(SimpleRing/DivisionRing): simple module is preserved by ModuleCat equivs)](https://github.com/leanprover-community/mathlib4/pull/41233).
🤖 Prepared with Claude Code
|
LLM-generated |
16/19 |
Mathlib/CategoryTheory/Simple.lean,Mathlib/RingTheory/SimpleRing/DivisionRing.lean |
2 |
1 |
['github-actions'] |
nobody |
8-12122 8 days ago |
8-12122 8 days ago |
8-12002 8 days |
| 41578 |
kim-em author:kim-em |
chore: weaken hypotheses of Algebra.IsUnramifiedIn.ramificationIdx_eq_one |
This PR drops the unused `[IsDomain R] [Module.Finite ℤ R] [CharZero R] [Algebra.IsIntegral R S]` hypotheses from `Algebra.IsUnramifiedIn.ramificationIdx_eq_one` by proving via `Ideal.ramificationIdx_eq_one` directly rather than through `Ideal.ramificationIdx_eq_one_iff`, and tidy the docstrings in `Mathlib/RingTheory/Unramified/Locus.lean` (fix a stray space before a period, mention `Algebra.IsUnramifiedIn` in the module docstring, add a missing blank line).
Follow-up to [#40886 (feat: add Algebra.IsUnramifiedIn)](https://github.com/leanprover-community/mathlib4/pull/40886).
🤖 Prepared with Claude Code
|
LLM-generated |
8/6 |
Mathlib/NumberTheory/RamificationInertia/Unramified.lean,Mathlib/RingTheory/Unramified/Locus.lean |
2 |
1 |
['github-actions'] |
nobody |
8-11991 8 days ago |
8-11991 8 days ago |
8-11871 8 days |
| 41030 |
tb65536 author:tb65536 |
refactor(GroupTheory/Commensurable): add and generalize API |
This PR makes the following changes to `GroupTheory/Commensurable.lean`:
- Use `IsFiniteRelIndex` instead of `relIndex ≠ 0` to allow use of `IsFiniteRelIndex` API.
- Add API lemmas for `bot`, `top`, `inf`, `map`, `comap`, and `smul`.
- Deprecate the existing conjugation API lemmas as superseded by the new `smul` API lemmas.
- Define `commensurator` directly via `MulAut.conj` rather than going through `ConjAct`.
- Deprecate the auxiliary `commensurator'`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
130/55 |
Mathlib/GroupTheory/Commensurable.lean,Mathlib/GroupTheory/Index.lean,Mathlib/NumberTheory/ModularForms/ArithmeticSubgroups.lean,Mathlib/NumberTheory/ModularForms/CongruenceSubgroups.lean,Mathlib/NumberTheory/ModularForms/Cusps.lean,Mathlib/Topology/Algebra/Group/DiscontinuousSubgroup.lean,Mathlib/Topology/Algebra/IsUniformGroup/DiscreteSubgroup.lean |
7 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
8-10462 8 days ago |
8-12811 8 days ago |
30-82874 30 days |
| 41374 |
SnirBroshi author:SnirBroshi |
chore(SimpleGraph/Girth): namespace `egirth_le_length` under `IsCycle` |
For dot notation and because this is about cycles. This matches the circuit version.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
10/6 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
8-10426 8 days ago |
8-11616 8 days ago |
21-47500 21 days |
| 41432 |
SnirBroshi author:SnirBroshi |
chore(Combinatorics/SimpleGraph/Paths): spell `getVert` injectivity lemmas using `Set` intervals |
e.g. replace `{i | i ≤ p.length}` with `Iic p.length` in `IsPath.getVert_injOn`, which is the canonical spelling.
Proofs using `Set.mem_setOf`/`Set.mem_setOf_eq` had to be fixed, and got golfed along the way.
I also rewrote the proof of `IsPath.getVert_injOn` since it seemed too long.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
29/60 |
Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
8-10350 8 days ago |
8-11679 8 days ago |
19-42021 19 days |
| 41380 |
SnirBroshi author:SnirBroshi |
feat(Combinatorics/SimpleGraph/Girth): relate `girth` and `egirth` |
Also add `le_girth` to match `le_egirth`, which is the only `egirth` lemma that's missing a `girth` counterpart.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
38/4 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
8-10006 8 days ago |
8-11245 8 days ago |
21-30664 21 days |
| 41622 |
benjub author:benjub |
feat(Order): add subset_Icc_iff and Set.OrdConnected.eq_Icc |
Add two lemmas relating to closed bounded intervals in a preorder:
- `subset_Icc_iff : s ⊆ Icc a b ↔ a ∈ lowerBounds s ∧ b ∈ upperBounds s` in `Mathlib/Order/Bounds/Basic.lean` characterizes containment in a closed bounded interval. This is the version "with witnesses" of `bddBelow_bddAbove_iff_subset_Icc`, and we prove the latter as a corollary.
- `OrdConnected.eq_Icc (s : Set α) (hs : OrdConnected s) (ha : IsLeast s a) (hb : IsGreatest s b) : s = Icc a b` in `Mathlib/Order/Interval/Set/OrdConnected.lean` gives a sufficient condition to be a closed bounded interval. It uses the previous lemma in its proof.
---
**Motivation:** I plan to use `OrdConnected.eq_Icc` to show that a set is closed when it is ordconnected and contains its infimum and supremum. This will allow to use the existing "continuous induction principle" `IsClosed.mem_of_ge_of_forall_exists_gt` to shorten the (compiling) proof in the draft PR #41552. |
t-order
new-contributor
|
9/3 |
Mathlib/Order/Bounds/Basic.lean,Mathlib/Order/Interval/Set/OrdConnected.lean |
2 |
5 |
['benjub', 'github-actions', 'grunweg'] |
nobody |
8-9826 8 days ago |
8-14061 8 days ago |
14-14738 14 days |
| 39872 |
mkaratarakis author:mkaratarakis |
feat(RingTheory/Algebraic): add natDenominator API |
Add `AlgebraicDenominator.denominator` and `AlgebraicDenominator.natDenominator`,
characterizing denominators of algebraic elements as generators of a colon ideal and,
over `ℤ`, their absolute value as a natural-number denominator.
Part of the Gelfond–Schneider formalization; see #39873, #39875, and #39874.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
cc @tb65536 |
t-ring-theory |
68/0 |
Mathlib.lean,Mathlib/RingTheory/Algebraic/NatDenominator.lean |
2 |
4 |
['faenuccio', 'github-actions', 'mkaratarakis', 'tb65536'] |
jjdishere assignee:jjdishere |
8-7877 8 days ago |
53-19958 53 days ago |
61-11363 61 days |
| 36442 |
SnirBroshi author:SnirBroshi |
feat(Data/Sym/Sym2/Card): cardinality theorems about `Sym2 α` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
168/0 |
Mathlib.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/Sym/Sym2.lean,Mathlib/Data/Sym/Sym2/Card.lean |
4 |
33 |
['SnirBroshi', 'eric-wieser', 'github-actions', 'joneugster', 'mathlib-merge-conflicts', 'themathqueen'] |
eric-wieser assignee:eric-wieser |
8-6683 8 days ago |
8-10591 8 days ago |
69-71682 69 days |
| 41829 |
felixpernegger author:felixpernegger |
perf: explicitly specify free universes in `ModuleCat` |
Like #40964, but for `ModuleCat`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
197/193 |
Mathlib/Algebra/Category/AlgCat/Symmetric.lean,Mathlib/Algebra/Category/CoalgCat/Basic.lean,Mathlib/Algebra/Category/CoalgCat/ComonEquivalence.lean,Mathlib/Algebra/Category/CoalgCat/Monoidal.lean,Mathlib/Algebra/Category/FGModuleCat/Basic.lean,Mathlib/Algebra/Category/Grp/ZModuleEquivalence.lean,Mathlib/Algebra/Category/ModuleCat/Adjunctions.lean,Mathlib/Algebra/Category/ModuleCat/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Differentials/Basic.lean,Mathlib/Algebra/Category/ModuleCat/FilteredColimits.lean,Mathlib/Algebra/Category/ModuleCat/Images.lean,Mathlib/Algebra/Category/ModuleCat/Kernels.lean,Mathlib/Algebra/Category/ModuleCat/Limits.lean,Mathlib/Algebra/Category/ModuleCat/Localization.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Adjunction.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Closed.lean,Mathlib/Algebra/Category/ModuleCat/Monoidal/Symmetric.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/ColimitFunctor.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Monoidal.lean,Mathlib/Algebra/Category/ModuleCat/Subobject.lean,Mathlib/Algebra/Homology/ShortComplex/ModuleCat.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/AlgebraicGeometry/StructureSheaf.lean,Mathlib/CategoryTheory/Abelian/Ext.lean,Mathlib/CategoryTheory/Abelian/GrothendieckCategory/ModuleEmbedding/GabrielPopescu.lean,Mathlib/CategoryTheory/Limits/ConcreteCategory/WithAlgebraicStructures.lean,Mathlib/CategoryTheory/Linear/Yoneda.lean,Mathlib/Condensed/Discrete/Module.lean,Mathlib/Condensed/Light/Explicit.lean,Mathlib/Condensed/Light/Small.lean,Mathlib/LinearAlgebra/QuadraticForm/QuadraticModuleCat.lean,Mathlib/LinearAlgebra/QuadraticForm/QuadraticModuleCat/Monoidal.lean,Mathlib/LinearAlgebra/QuadraticForm/QuadraticModuleCat/Symmetric.lean,Mathlib/RepresentationTheory/Coinvariants.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/Basic.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/Functoriality.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/LongExactSequence.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/Basic.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/Functoriality.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/LongExactSequence.lean,Mathlib/RepresentationTheory/Homological/GroupHomology/LowDegree.lean,Mathlib/RepresentationTheory/Homological/Resolution.lean,Mathlib/RepresentationTheory/Homological/TateCohomology/Basic.lean,Mathlib/RepresentationTheory/Invariants.lean,Mathlib/RepresentationTheory/Rep/Basic.lean,Mathlib/RepresentationTheory/Rep/Iso.lean,Mathlib/RingTheory/Depth/Rees.lean,Mathlib/RingTheory/Flat/CategoryTheory.lean,Mathlib/RingTheory/Regular/Category.lean |
51 |
10 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors'] |
nobody |
8-1237 8 days ago |
9-81353 9 days ago |
9-82202 9 days |
| 41827 |
mpacholski author:mpacholski |
feat(LinearAlgebra/TensorProduct): port lifts API from PiTensorProduct |
Port the `lifts` API from `PiTensorProduct` to the binary `TensorProduct` in `Mathlib/LinearAlgebra/TensorProduct/Basic.lean`.
This API provides the necessary machinery to represent any tensor element as a formal sum of pure generators in the free monoid, which is a key prerequisite for defining and proving properties of the binary projective seminorm.
It is a direct reflection of lifts API in `Mathlib/LinearAlgebra/PiTensorProduct/Basic.lean`.
Specifically, add:
- `FreeAddMonoid.toTensorProduct`: proves that the image of a free monoid element is the sum of its pure tensor components.
- `lifts`: defines the set of all valid monoid representations of a given tensor.
- `nonempty_lifts`: proves that every tensor has at least one representation.
- `lifts_zero`, `lifts_add`, `lifts_smul_left` and `lifts_smul_right`: establish the algebraic behavior of lifts under addition, zero, and scalar multiplication.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
56/0 |
Mathlib/LinearAlgebra/TensorProduct/Basic.lean |
1 |
2 |
['github-actions'] |
nobody |
7-81891 7 days ago |
7-83862 7 days ago |
7-83742 7 days |
| 38596 |
JJYYY-JJY author:JJYYY-JJY |
feat(LinearAlgebra/Matrix): add row-equivalence and echelon-form API |
This PR adds the first foundational slice of `Mathlib.LinearAlgebra.Matrix.Echelon`, a theorem-oriented API for elementary row operations, row-equivalence, and echelon-form predicates for matrices.
The main additions are:
* elementary row-scaling matrices and their `GL` versions;
* `Matrix.RowEquivalent` for the left action of `GL m R` on rectangular matrices;
* row-zero, pivot, echelon, and reduced-echelon predicates;
* semantic representative predicates `Matrix.IsEchelonFormOf` and `Matrix.IsReducedEchelonFormOf`.
This intentionally stops before row-space characterizations, existence and uniqueness of reduced echelon representatives, and the noncomputable canonical representative `Matrix.rref`; those are planned for later PRs.
Co-authored-by: Joseph Qian <jqian507@gmail.com>
Co-authored-by: Veer Shukla <shukvee@uw.edu>
Co-authored-by: Dhruv Bhatia <dhruvbhatia00@gmail.com>
Co-authored-by: Zheng Wu <1036819072@qq.com>
---
This update trims the original full row-reduction API in response to reviewer feedback that the PR was too large. It keeps only the foundation needed by later row-reduction and `rref` PRs. |
t-algebra
new-contributor
label:t-algebra$ |
290/0 |
Mathlib.lean,Mathlib/LinearAlgebra/Matrix/Echelon.lean |
2 |
35 |
['JJYYY-JJY', 'SnirBroshi', 'bryangingechen', 'copilot-pull-request-reviewer', 'dagurtomas', 'github-actions', 'mathlib-merge-conflicts', 'mathlib-splicebot', 'themathqueen', 'wwylele'] |
mattrobball assignee:mattrobball |
7-79583 7 days ago |
7-80143 7 days ago |
63-14635 63 days |
| 41902 |
Ljon4ik4 author:Ljon4ik4 |
feat: sum of derivations lemmas |
This PR adds Lemmas showing that derivations are well-behaved with sums.
In order to prove one of them an additive map version of `coe : Derivation R A M → A →ₗ[R] M` is also added.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
17/0 |
Mathlib/RingTheory/Derivation/Basic.lean |
1 |
8 |
['Ljon4ik4', 'github-actions', 'mathlib-bors', 'wwylele'] |
nobody |
7-75105 7 days ago |
8-1267 8 days ago |
8-1153 8 days |
| 41905 |
wwylele author:wwylele |
feat(FieldTheory): relrank lemma about sup |
The main lemma I want is `(A ⊔ C).relrank (B ⊔ C) ≤ A.relrank B`. Added some trivial lemma along the way.
---
AI usage disclosure: this was originally drafted by Aristotle, then cleaned up by me.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
95/0 |
Mathlib/FieldTheory/Relrank.lean |
1 |
2 |
['copilot-pull-request-reviewer', 'github-actions'] |
nobody |
7-74694 7 days ago |
7-78526 7 days ago |
7-78406 7 days |
| 38649 |
chrisflav author:chrisflav |
chore(RingTheory): equality of linear map with values in finite module spreads out |
We add some corollaries of `Module.Finite.exists_smul_of_comp_eq_of_isLocalizedModule`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
large-import
|
75/1 |
Mathlib/Algebra/Module/FinitePresentation.lean,Mathlib/RingTheory/Localization/BaseChange.lean,Mathlib/RingTheory/Localization/Module.lean |
3 |
2 |
['github-actions'] |
mariainesdff assignee:mariainesdff |
7-67148 7 days ago |
89-17723 89 days ago |
89-17603 89 days |
| 40410 |
seewoo5 author:seewoo5 |
feat(DihedralGroup): center of $D_n$ for even $n\ne 2$ |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
For even $n \ne 2$, center of $D_n$ is generated by the rotation `r (n/2)`. This is a companion of `center_eq_bot_of_odd_ne_one` proved in #33971. Initial code & further golfing is done by Claude Opus 4.5.
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
t-group-theory
label:t-algebra$ |
41/0 |
Mathlib/GroupTheory/SpecificGroups/Dihedral.lean |
1 |
11 |
['SnirBroshi', 'github-actions', 'plp127', 'seewoo5'] |
mattrobball assignee:mattrobball |
7-67147 7 days ago |
46-49749 46 days ago |
47-25246 47 days |
| 40782 |
tb65536 author:tb65536 |
feat(Combinatorics/SimpleGraph/Coloring/EdgeLabeling): add predicates for monochromatic subsets |
This PR adds predicates for monochromatic subsets, in preparation for Ramsey theory.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
143/0 |
Mathlib/Combinatorics/SimpleGraph/Coloring/EdgeLabeling.lean |
1 |
26 |
['SnirBroshi', 'YaelDillies', 'b-mehta', 'github-actions', 'tb65536'] |
b-mehta assignee:b-mehta |
7-67146 7 days ago |
21-79944 21 days ago |
34-38664 34 days |
| 41299 |
JovanGerb author:JovanGerb |
chore(DomAct): clean up `DomMulAct`/`DomAddAct` instances |
This PR cleans up the `DomMulAct`/`DomAddAct` instances using `inferInstanceAs`.
Instead having the `MyClass Mᵐᵒᵖ` instance imply the `MyClass Mᵈᵐᵃ` instance, we use `MyClass M` as the hypothesis. For this to work, some instances need to be moved from the group file to the ring file, so that the required instances are available.
Additionally, `@[to_additive]` is now only used in the group instances and not the ring instances.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
large-import
|
21/16 |
Mathlib/Algebra/Module/Hom.lean,Mathlib/Algebra/Module/LinearMap/Basic.lean,Mathlib/Algebra/Ring/Opposite.lean,Mathlib/GroupTheory/GroupAction/DomAct/Basic.lean |
4 |
1 |
['github-actions'] |
tb65536 assignee:tb65536 |
7-67142 7 days ago |
24-12567 24 days ago |
24-12722 24 days |
| 38979 |
ldct author:ldct |
feat(EReal): simplify nat + ⊤ |
Alternative version of https://github.com/leanprover-community/mathlib4/pull/38975
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
28/2 |
Mathlib/Data/EReal/Basic.lean,Mathlib/Data/EReal/Operations.lean,MathlibTest/EReal.lean |
3 |
7 |
['SnirBroshi', 'eric-wieser', 'github-actions', 'ldct', 'leanprover-radar', 'plp127'] |
eric-wieser assignee:eric-wieser |
7-60870 7 days ago |
81-18326 81 days ago |
81-18336 81 days |
| 40498 |
wangying11123 author:wangying11123 |
feat(Geometry/Euclidean): unoriented angle eq of oriented angle eq |
This PR adds two theorems to Mathlib/Geometry/Euclidean/Angle/Oriented/Affine.lean
`angle_eq_of_oangle_eq`: If two oriented angles are equal, and the four endpoint pairs are nondegenerate, then the
corresponding unoriented angles are equal.
`angle_eq_of_oangle_eq_not_collinear`: If two oriented angles are equal, and the first triple is not collinear, then the
corresponding unoriented angles are equal. |
new-contributor |
22/0 |
Mathlib/Geometry/Euclidean/Angle/Oriented/Affine.lean |
1 |
5 |
['github-actions', 'plp127'] |
nobody |
7-60364 7 days ago |
45-28140 45 days ago |
45-28071 45 days |
| 35402 |
samueloettl author:samueloettl |
feat(Dynamics/BirkhoffSum): birkhoffAverage const |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
I think this is useful and one of these should be a simp lemma.
I'm not really sure if I got the naming of the theorems correct.
When generalizing to the assumption (n : R) ≠ 0 instead of the special case CharZero R with n ≠ 0 I had to use "open Classical in". I'm a bit unfamiliar with that part so please check if this makes sense. See also https://github.com/leanprover-community/mathlib4/pull/35307#discussion_r2823586252
[](https://gitpod.io/from-referrer/)
|
t-dynamics
new-contributor
|
14/0 |
Mathlib/Dynamics/BirkhoffSum/Average.lean |
1 |
39 |
['Maldooor', 'github-actions', 'lua-vr', 'mcdoll', 'plp127', 'samueloettl'] |
nobody |
7-59782 7 days ago |
88-19196 88 days ago |
154-17889 154 days |
| 41914 |
Qinghev author:Qinghev |
feat(Analysis/Normed): bound finite convex combinations |
---
codex辅助我完成了编写和校验。 |
t-analysis
LLM-generated
new-contributor
|
8/0 |
Mathlib/Analysis/Normed/Module/Convex.lean |
1 |
3 |
['Qinghev', 'github-actions'] |
nobody |
7-57724 7 days ago |
7-58983 7 days ago |
7-58863 7 days |
| 41882 |
theebayuser author:theebayuser |
feat(Data/List): decidability of HasPeriod and periods of repeated lists |
Hello, this PR extends `Mathlib/Data/List/PeriodicityLemma.lean` with:
* a `Decidable (List.HasPeriod w p)` instance (it is a prefix test), and
* two directions that relate periods to repetition:
* `hasPeriod_flatten_replicate` — `(replicate n l).flatten` has period `l.length`
* `eq_flatten_replicate_of_hasPeriod` — a word with period `p` and length `r * p` is the `r`-fold repetition of its length-`p` prefix.
This characterizes `r`-th powers of words by a period plus a length constraint, which a future follow-up PR that I plan to work on will use.
AI disclosure: This code was mostly generated by Claude Fable 5 and Opus 4.8 as part of my larger project on combinatorics on words, which I then reviewed and revised to contribute to mathlib.
|
t-data
LLM-generated
new-contributor
|
70/1 |
Mathlib/Data/List/PeriodicityLemma.lean |
1 |
8 |
['SnirBroshi', 'github-actions', 'theebayuser'] |
nobody |
7-57248 7 days ago |
8-44409 8 days ago |
8-44289 8 days |
| 41909 |
wwylele author:wwylele |
feat(FieldTheory): field equivalences for bot subfield |
Make it easier to use than the existing Subfield equality lemma.
---
~~The ZMod version `Subfield.botEquivZMod_symm_apply` is missing because the statement
`(Subfield.botEquivZMod K p).symm x = algebraMap (ZMod p) (⊥ : Subfield K) x` doesn't type-check, which is missing the instance `Algebra (ZMod p) (⊥ : Subfield K)`, which is because [ZMod.algebra](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Algebra/Algebra/ZMod.html#ZMod.algebra) is a `def`~~
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
44/3 |
Mathlib/FieldTheory/PrimeField.lean |
1 |
4 |
['copilot-pull-request-reviewer', 'github-actions', 'plp127', 'wwylele'] |
nobody |
7-56666 7 days ago |
7-66142 7 days ago |
7-66543 7 days |
| 39420 |
mbkybky author:mbkybky |
feat(RingTheory/LocalProperties): `Module.Invertible` is a local property |
Let `M` be a finite `R`-module. We show that `M` is invertible if `Mₘ` is invertible for any maximal ideal `m` of `R`.
- [x] depends on: #39109
- [x] depends on: #39412
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
101/0 |
Mathlib.lean,Mathlib/RingTheory/LocalProperties/Invertible.lean |
2 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
7-55160 7 days ago |
7-55717 7 days ago |
16-28804 16 days |
| 41915 |
theebayuser author:theebayuser |
feat(Data/List): infixes, the enumerator of contiguous factors |
Hello, this PR extends `Mathlib/Data/List/Infix.lean` with the missing third enumerator alongside `inits` and `tails`:
* `infixes l` — all contiguous factors (infixes) of `l`, with multiplicity, as every prefix of every suffix, and
* its membership characterization and basic API:
* `mem_infixes` (`@[simp]`) — `s ∈ t.infixes ↔ s <:+: t`, the infix analogue of `mem_inits`/`mem_tails`
* `infixes_nil`, `infixes_cons`, `length_infixes_cons`, `nil_mem_infixes`, `self_mem_infixes`, `infixes_ne_nil`.
This gives `∃ s, s <:+: t ∧ P s` and `∀ s, s <:+: t → P s` executable bounded-search forms (e.g. deciding repetition-freeness of a fixed word by `decide`), which a future follow-up PR that I plan to work on will use.
AI disclosure: This code was mostly generated by Claude Fable 5 and Opus 4.8 as part of my larger project on combinatorics on words, which I then reviewed and revised to contribute to mathlib.
|
t-data
LLM-generated
new-contributor
|
47/1 |
Mathlib/Data/List/Infix.lean |
1 |
3 |
['github-actions', 'theebayuser'] |
nobody |
7-54813 7 days ago |
7-57624 7 days ago |
7-57504 7 days |
| 41916 |
peabrainiac author:peabrainiac |
feat(Topology): add `Homeomorph.Set.iUnion` |
Disjoint unions of families of sets are canonically isomorphic to disjoint unions of the corresponding subtypes, provided each set in the family can be separated from the others with an open neighbourhood.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
The equivalence underlying this homeomorphism is already in mathlib as `Set.unionEqSigmaOfDisjoint`. I think that should be renamed to `Equiv.Set.iUnion` for several reasons, but doing so would touch 5 different files, so it's probably cleaner to do that in a separate PR.
[](https://gitpod.io/from-referrer/)
|
t-topology |
35/0 |
Mathlib/Topology/Homeomorph/Lemmas.lean |
1 |
1 |
['github-actions'] |
nobody |
7-54708 7 days ago |
7-56345 7 days ago |
7-56225 7 days |
| 40941 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add stabilizers of vectors in representations |
Add Representation.stabilizer: the subgroup fixing a vector in a representation.
Provide basic lemmas for zero vectors, scalar multiples, sums, intertwining maps, and conjugations, as a first step toward smooth representations. Make representation-theoretic arguments use this specialized API instead of repeatedly unfolding the fixed-vector condition or routing through the more general MulAction stabilizer API. |
t-algebra
new-contributor
label:t-algebra$ |
68/0 |
Mathlib.lean,Mathlib/RepresentationTheory/Stabilizer.lean |
2 |
70 |
['JX-Mo', 'Whysoserioushah', 'github-actions', 'tb65536'] |
nobody |
7-53696 7 days ago |
9-13214 9 days ago |
30-26139 30 days |
| 41911 |
kedlaya author:kedlaya |
feat(FieldTheory): implement Artin-Schreier extensions, Artin-Schreier theorem |
Implement the Artin-Schreier description of cyclic degree-p extensions of fields of characteristic p, and the related theorem of Artin-Schreier that a field with a finite algebraically closed extension is either algebraically closed or real closed.
|
t-algebra
new-contributor
label:t-algebra$ |
486/0 |
Mathlib.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/FieldTheory/ArtinSchreierExtension.lean,Mathlib/FieldTheory/IsRealClosed/ArtinSchreier.lean |
4 |
11 |
['SnirBroshi', 'github-actions', 'jcommelin', 'kedlaya'] |
nobody |
7-51600 7 days ago |
7-60450 7 days ago |
7-61671 7 days |
| 41890 |
Ljon4ik4 author:Ljon4ik4 |
feat: semidirect product of Lie algebras - adding simp lemmas for toProd.symm and toProdl.symm |
As an `R`-module the semidirect product of two Lie algebras ` K ⋊⁅ψ⁆ L` is isomorphic to ` K × L`.
The simp lemmas for the reverse direction of this isomorphisms were missing and are added in this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
5/1 |
Mathlib/Algebra/Lie/SemiDirect.lean |
1 |
2 |
['github-actions'] |
nobody |
7-37908 7 days ago |
8-20497 8 days ago |
8-20377 8 days |
| 41180 |
xroblot author:xroblot |
feat(NumberTheory/NumberField): congruence for the norm of an unramified prime |
Add `torsionOrder_dvd_absNorm_sub_one'`: if a prime `P` of `𝓞 K` is unramified over `ℤ` and the rational prime below it has norm greater than `2`, then `torsionOrder K` divides `absNorm P - 1`. This is a variant of `torsionOrder_dvd_absNorm_sub_one` that replaces the coprimality hypothesis by unramifiedness.
Also add the helper `pow_torsionOrder_eq_one`.
Co-authored-by: Ashleigh Ratcliffe
Co-authored-by: Bryan Hu
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
t-algebra
label:t-algebra$ |
84/5 |
Mathlib/NumberTheory/NumberField/Ideal/Basic.lean,Mathlib/NumberTheory/NumberField/Units/Basic.lean |
2 |
19 |
['CBirkbeck', 'github-actions', 'tb65536', 'xroblot'] |
tb65536 assignee:tb65536 |
7-36907 7 days ago |
7-63192 7 days ago |
24-79899 24 days |
| 41839 |
CoolRmal author:CoolRmal |
feat(Topology/Connected): connected subsets of finite one-dimensional Hausdorff measure |
This PR proves some properties of preconnected subsets of an extended metric space in terms of their Hausdorff measure.
- The extended diameter of a preconnected set is at most its one-dimensional Hausdorff measure
- A preconnected set with finite `d`-dimensional Hausdorff measure for some `d < 1` is a subsingleton, so any set with finite such measure is totally disconnected
- A preconnected set with finite one-dimensional Hausdorff measure is totally bounded.
The main tool is that the distance from a fixed base point is `1`-Lipschitz (we define it by `x => (edist a x).toReal` and `ENNReal.toReal` is necessary because `ℝ≥0∞` is not an EMetric space and blocks me from using `LipschitzOnWith`, this is also the reason why I proved some weird lemmas like `isClopen_setOf_edist_ne_top` and `IsPreconnected.edist_ne_top`), so it does not increase Hausdorff measures, and the image of a preconnected set under it is an interval whose one-dimensional Hausdorff measure is its length. Comparing the two turns distances inside the set into lower bounds for its measure.
Some of these lemmas probably should belong to a different space. Feel free to give me some suggestions on this.
In the future, I would also like to use results in this PR to prove that a preconnected, compact subset with finite one-dimensional Hausdorff measure is path-connected, and this is included in TODO.
Created with the help of Claude Code, carefully reviewed and golfed by myself.
|
t-topology
LLM-generated
|
179/0 |
Mathlib.lean,Mathlib/Topology/Connected/HausdorffMeasure.lean,Mathlib/Topology/EMetricSpace/Defs.lean |
3 |
3 |
['CoolRmal', 'github-actions', 'plp127'] |
nobody |
7-35007 7 days ago |
7-36506 7 days ago |
9-70840 9 days |
| 39219 |
WenrongZou author:WenrongZou |
feat(FieldTheory/Finite): add variant theorems for `expand_card` |
Add `MvPolynomial, MvPowerSeries, PowerSeries` version of `FiniteField.expand_card`, which is only for polynomial.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
37/3 |
Mathlib/FieldTheory/Finite/Basic.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/FiniteField.lean,Mathlib/RingTheory/MvPolynomial/Expand.lean,Mathlib/RingTheory/MvPowerSeries/Expand.lean,Mathlib/RingTheory/PowerSeries/Expand.lean |
5 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
kim-em assignee:kim-em |
7-31724 7 days ago |
7-32471 7 days ago |
71-36132 71 days |
| 41920 |
junjihashimoto author:junjihashimoto |
feat(Analysis/CliffordAlgebra): the pseudoscalar of Cl(n,0) and its complex structure |
We study the Clifford algebra of Euclidean `n`-space (the quadratic form `x ↦ ⟪x, x⟫_ℝ` on `EuclideanSpace ℝ (Fin n)`). The pseudoscalar `ω = e₀ ⋯ eₙ₋₁` satisfies
* `ω * ω = (-1) ^ (n.choose 2)` (`pseudoscalar_mul_pseudoscalar'`),
* `γᵢ * ω = (-1) ^ (n - 1) • (ω * γᵢ)` (`γ_mul_pseudoscalar`),
so it is central for odd `n`, and a square root of `-1` iff `n ≡ 2, 3 [MOD 4]`. In that case left multiplication by `ω` is a complex structure: we provide a scoped `Module ℂ` instance (via `Complex.liftAux` and `Module.compHom`; no commutation is needed for a module structure, which covers the non-central case `n ≡ 2 [MOD 4]`), and for `n ≡ 3 [MOD 4]` an `Algebra ℂ` structure as a non-instance def.
The sign computations are done by moving a generator through a product of distinct generators (`γ_mul_prod`, `γ_mul_prod_mem`, `prod_sq`), with no case analysis on `n`.
In a follow-up PR this makes the Clifford–Fourier transform (Ebling–Scheuermann) an instance of the ordinary vector-valued Fourier transform, giving Plancherel's theorem and the inversion formula.
- [ ] depends on: (nothing)
|
t-analysis
new-contributor
|
303/0 |
Mathlib.lean,Mathlib/Analysis/CliffordAlgebra/Euclidean.lean |
2 |
2 |
['github-actions'] |
nobody |
7-27650 7 days ago |
7-28201 7 days ago |
7-28581 7 days |
| 41892 |
Ljon4ik4 author:Ljon4ik4 |
feat: mapOfCompatibleSMul is the same map independently of S |
The `mapOfCompatibleSMul : M ⊗[A] N →ₗ[S] M ⊗[R] N` is the same map independently of `S`. This PR adds two lemmas asserting that (one for the underlying AddHom, one for the kernels).
I am not quite sure whether the second one is in the optimal shape: It was the shape useful to me, but maybe there is some better way to phrase it or it should be omitted completely (since it follows from the first one...).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
10/1 |
Mathlib/LinearAlgebra/TensorProduct/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
7-20572 7 days ago |
8-18772 8 days ago |
8-18652 8 days |
| 40368 |
Sanghyeok0 author:Sanghyeok0 |
feat: add confluence predicates for relations |
This PR adds a minimal relation-level API for confluence-style properties:
* `Relation.Diamond`
* `Relation.Confluent`
* `Relation.ChurchRosser`
It also adds the basic API connecting these predicates:
* `Relation.ReflTransGen.to_eqvGen`
* `Relation.Join.to_eqvGen`
* `Relation.ChurchRosser.confluent`
* `Relation.Confluent.churchRosser`
The main downstream application is the polynomial-reduction development in
#41475. There, polynomial reduction is treated as an ordinary relation on
`MvPolynomial`, and these predicates are used to formulate confluence and the
Church--Rosser property.
A more general rewriting API exists in CSLib. This PR does not attempt to
upstream that API wholesale; its scope is intentionally limited to the
declarations needed by the downstream polynomial application.
The earlier version of this PR also introduced
`Relation.StronglyConfluent` and additional equivalence packaging. Those
declarations have been removed to keep this PR small and application-driven.
Reference: Becker, Weispfenning, and Kredel,
*Gröbner Bases: A Computational Approach to Commutative Algebra*.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic
new-contributor
|
79/5 |
Mathlib/Logic/Relation.lean |
1 |
8 |
['Sanghyeok0', 'chenson2018', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
7-16957 7 days ago |
7-25031 7 days ago |
30-36702 30 days |
| 41855 |
Nicola9Falciola author:Nicola9Falciola |
feat(LinearAlgebra/Matrix/GeneralLinearGroup/Card): add theorem proving cardinal of matrix |
Add the theorem proving the cardinality formula for `Matrix`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
5/0 |
Mathlib/LinearAlgebra/Matrix/GeneralLinearGroup/Card.lean |
1 |
3 |
['felixpernegger', 'github-actions'] |
nobody |
7-16347 7 days ago |
9-32147 9 days ago |
9-32027 9 days |
| 41904 |
rshlyakh author:rshlyakh |
feat(RingTheory/KrullDimension): add Krull dimension preservation under injective integral extensions |
This proves that an injective integral homomorphism of commutative rings
preserves Krull dimension, based on the `Algebra.HasGoingUp` infrastructure from #40911. It includes:
- `RingHom.IsIntegral.ringKrullDim_eq_of_injective`: injective integral homomorphisms of
commutative rings preserve Krull dimension.
- `RingHom.IsIntegral.ringKrullDim_quotient_ker_eq`: for an integral extension `f : A →+* B`,
the Krull dimension of `B` is equal to the Krull dimension of `A ⧸ RingHom.ker f`.
- [x] depends on: #40911
- [x] depends on: #41058
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
|
77/13 |
Mathlib.lean,Mathlib/RingTheory/Ideal/HasGoingUp.lean,Mathlib/RingTheory/KrullDimension/Integral.lean |
3 |
13 |
['github-actions', 'mathlib-dependent-issues', 'rshlyakh', 'vlad902'] |
nobody |
7-12491 7 days ago |
7-13578 7 days ago |
7-47721 7 days |
| 41214 |
artie2000 author:artie2000 |
chore(Algebra/Polynomial/Degree): rename lemma |
* Rename `degree_sub_lt` to `degree_sub_lt_left` due to proposed `_right` variation PRed at #37956. Rename suggested at https://github.com/leanprover-community/mathlib4/pull/37956#discussion_r3070265942
This PR is blocking #37956
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
12/9 |
Mathlib/Algebra/Polynomial/Degree/Defs.lean,Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Polynomial/Sequence.lean,Mathlib/FieldTheory/Minpoly/Field.lean,Mathlib/FieldTheory/Minpoly/IsIntegrallyClosed.lean,Mathlib/LinearAlgebra/Lagrange.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/PowerSeries/WeierstrassPreparation.lean |
8 |
1 |
['github-actions', 'themathqueen'] |
nobody |
7-10413 7 days ago |
24-73975 24 days ago |
24-76092 24 days |
| 41206 |
Ljon4ik4 author:Ljon4ik4 |
feat: strict Lie-Rinehart ideals and Quotients by them |
In this PR strict ideals in the context of Lie-Rinehart algebras are defined and it is shown that quotients by them are again Lie-Rinehart algebras.
## Context on Lie-Rinehart algebras
A Lie-Rinehart algebra is given by a couple of an `R`-algebra `A` and an `R`-Lie-Algebra `L` acting on each other and satisfying certain compatibility conditions. The most important example of Lie-Rinehart algebras in geometry is given by `A`=smooth functions on a smooth manifold, and `L`= vector fields on the manifold. Many important geometric constructions (differential forms, Cartan calculus) are defined naturally in terms of Lie-Rinehart algebras.
## Relevance of the construction
This construction of quotients by ideals will be important to define the Basechange of Lie-Rineahart algebras, which in turn is necessary to define 'comorphisms'. Comorphisms are the right notion of morphism to do geometry (e.g. a smooth map between two manifolds corresponds to a comorphism of their associated Lie-Rinehart algebras).
## Strictness
The ideals here are called strict, because it is assumed that `A` remains untouched and one only considers a subobject of `L`. There seems to be constructions for non-strict ideals, but the definitions are more complicated:
https://www.uni-math.gwdg.de/mjotz/JotzLean18c.pdf
https://arxiv.org/pdf/1706.07084
## Changes made
The files `StrictIdeal.lean` and `Quotient.lean` are new, containing the definition of the ideals and the fact that quotients are again Lie-Rinehart algebras. The `Subalgebra.lean` was mildly changed, since it seemed strange to have `comap` and `ker` without having `map` and `range`.
## Disclosure of AI use
All code is hand-written, I used claude interpret debug messages and search for lemmas.
I think most notably the following patterns were proposed by claude:
* `mul_smul := by rintro r₁ r₂ ⟨x⟩; exact congrArg mk (mul_smul r₁ r₂ x)` to show that things are well-defined on the quotient.
* `change f.toLinearMap' ⁅x, y⁆ ∈ s₂` in the proof in `comap`. (I had a simp there, which had as a result `f.toLinearMap' ⁅x, y⁆ ∈ s₂`, but somehow the subsequent steps did not work then)
## Questions open
* I am not sure if strict is a good prefix, and am happy to change it to something else.
(Also, one could even argue that the subalgebras, as defined currently, should be called strict, too...)
* In the definition of `mk'` the `toFun` field seems obsolete to me, but somehow if I remove it I get an error in one of the lemmas after it.
* I am not sure I fully understand the 'per-definition' expose rules. When I first committed I got some errors so I made two defs exposed, but I am not sure that is the correct way to go.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
442/0 |
Mathlib.lean,Mathlib/Algebra/LieRinehartAlgebra/Quotient.lean,Mathlib/Algebra/LieRinehartAlgebra/StrictIdeal.lean,Mathlib/Algebra/LieRinehartAlgebra/Subalgebra.lean |
4 |
1 |
['github-actions'] |
nobody |
7-7905 7 days ago |
7-8444 7 days ago |
26-2729 26 days |
| 41907 |
Rob23oba author:Rob23oba |
feat: make `NegZeroClass` and `InvOneClass` mixins |
Most of the changes just add `[Zero α] [Neg α]` or `[One α] [Inv α]`, except:
- The change itself to `InvOneClass` / `NegZeroClass`
- Generalizing `neg_eq_zero` (and related theorems) to `InvolutiveNeg` + `NegZeroClass` and deprecating `EReal.neg_eq_zero_iff` / `ENNReal.inv_eq_zero_iff` / `SignType.neg_eq_zero_iff` which are no longer necessary
- Replacing occurrences of `@inv_one ty _` with `inv_one (G := ty)`
- Removing `one` and `inv` in some instance declarations of the form `:= { one, inv with inv_one := ... }`
- `mabs_sup_div_sup_le_mabs`, `mabs_inf_div_inf_le_mabs` and `tendsto_zpow_nhdsNE_zero_cobounded` needed adaptations; not sure why, something to do with unification?
- handling `InvOneClass` specially in `DomMulAct`
- replacing `neg_apply` in ``
- being more specific (i.e. `inv_one (G := F)` instead of `inv_one`) in the proof of `RatFunc.single_zpow`
- adding an `rw` in `differentIdeal_ne_bot` due to leanprover/lean4#14447
- replacing `ArithmeticFunction.neg_apply` with an `IsNegApply` instance
- adapting meta code by adding more implicit arguments (in the form of `none` arguments to `mkAppOptM`)
Zulip discussion at [#mathlib4 > Having both `NegZeroClass` and `InvolutiveNeg`](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Having.20both.20.60NegZeroClass.60.20and.20.60InvolutiveNeg.60/with/611441611)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
100/71 |
Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Group/EvenFunction.lean,Mathlib/Algebra/Group/Finsupp.lean,Mathlib/Algebra/Group/Hom/Basic.lean,Mathlib/Algebra/Group/InjSurj.lean,Mathlib/Algebra/Group/Pi/Basic.lean,Mathlib/Algebra/Group/WithOne/Defs.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/Algebra/Order/Group/Unbundled/Abs.lean,Mathlib/Algebra/QuadraticAlgebra/Defs.lean,Mathlib/Algebra/Ring/Periodic.lean,Mathlib/Algebra/TrivSqZeroExt/Basic.lean,Mathlib/Analysis/Normed/Field/Lemmas.lean,Mathlib/Data/ENNReal/Holder.lean,Mathlib/Data/ENNReal/Inv.lean,Mathlib/Data/EReal/Operations.lean,Mathlib/Data/FunLike/Group.lean,Mathlib/Data/Matrix/Basis.lean,Mathlib/Data/Matrix/Diagonal.lean,Mathlib/Data/Sign/Defs.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/GroupTheory/GroupAction/DomAct/Basic.lean,Mathlib/LinearAlgebra/Matrix/Block.lean,Mathlib/LinearAlgebra/Matrix/NonsingularInverse.lean,Mathlib/MeasureTheory/VectorMeasure/Basic.lean,Mathlib/NumberTheory/ArithmeticFunction/Defs.lean,Mathlib/Order/Filter/Germ/Basic.lean,Mathlib/RingTheory/DedekindDomain/Different.lean,Mathlib/RingTheory/HahnSeries/Addition.lean,Mathlib/RingTheory/HahnSeries/Cardinal.lean,Mathlib/RingTheory/LaurentSeries.lean,Mathlib/Tactic/Abel.lean,Mathlib/Tactic/Linarith/Verification.lean,Mathlib/Topology/Algebra/SeparationQuotient/Basic.lean,Mathlib/Topology/ContinuousMap/ContinuousMapZero.lean |
36 |
1 |
['github-actions'] |
nobody |
6-86007 6 days ago |
7-2404 7 days ago |
7-5108 7 days |
| 41786 |
Nicola9Falciola author:Nicola9Falciola |
feat(LinearAlgebra/Matrix/GeneralLinearGroup/Defs): add the proof of the range of toGL to be the ker of the determinant and the induced equivalence |
Add a lemma proving that the `toGL.range ` is equal to `det.ker` and the induced equivalence between `SL` and `det.ker` .
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
13/0 |
Mathlib/LinearAlgebra/Matrix/GeneralLinearGroup/Defs.lean |
1 |
2 |
['github-actions'] |
nobody |
6-85842 6 days ago |
10-43199 10 days ago |
10-45538 10 days |
| 41891 |
sgouezel author:sgouezel |
feat: Fubini theorem for vector measures |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
259/0 |
Mathlib/MeasureTheory/VectorMeasure/Prod.lean |
1 |
5 |
['SnirBroshi', 'github-actions', 'sgouezel'] |
nobody |
6-82923 6 days ago |
8-19148 8 days ago |
8-19086 8 days |
| 41934 |
NickKobs author:NickKobs |
feat(Order/Nucleus): a nucleus on a Boolean algebra is closed |
Adds `Mathlib/Order/Nucleus/Boolean.lean` — the Boolean specialization of the nucleus API:
```lean
theorem Nucleus.apply_eq_sup_apply_bot [BooleanAlgebra X] (n : Nucleus X) (a : X) :
n a = a ⊔ n ⊥
theorem Nucleus.isClosed_of_booleanAlgebra [BooleanAlgebra X] (n : Nucleus X) :
⇑n = fun a => a ⊔ n ⊥
theorem Nucleus.eq_of_apply_bot_eq [BooleanAlgebra X] {m n : Nucleus X} (h : m ⊥ = n ⊥) :
m = n
```
**Why.** `Mathlib.Order.Nucleus` provides the frame / Heyting-algebra structure of `Nucleus X`, the closure-operator view (`toClosureOperator`), and the pointwise `le_apply` / `idempotent` / `map_inf` API, but no Boolean specialization. On a Boolean algebra every nucleus is *closed* — completely determined by its value at `⊥` — which is the pointwise algebraic core of the classical fact that the assembly `N(L)` is Boolean iff `L` is (Beazer–Macnab; Simmons; Johnstone, *Stone Spaces*, II.2). It is the natural companion to the existing frame structure and a common building block in point-free topology.
**Proof.** `n a = n a ⊓ (a ⊔ aᶜ) = (n a ⊓ a) ⊔ (n a ⊓ aᶜ)`; the left join-and is `a` (inflationarity), the right is `≤ n a ⊓ n aᶜ = n (a ⊓ aᶜ) = n ⊥` (inflationarity of `aᶜ` + `map_inf`). The reverse inequality is inflationarity plus monotonicity applied to `⊥ ≤ a`. No completeness is needed — the statement is pointwise, so `[BooleanAlgebra X]` (not a complete Boolean algebra) suffices.
**References.**
* R. Beazer, D. S. Macnab, *Modal extensions of Heyting algebras*.
* H. Simmons, *A framework for topology*, Logic Colloquium '77.
* P. T. Johnstone, *Stone Spaces*, CUP (1982), II.2.
**Provenance.** The theorem was first mechanized (Mathlib-free, over a finite Boolean frame) in the BETTI/Araksha refusal-algebra work; this PR is the generalization to an arbitrary `BooleanAlgebra` against Mathlib's own `Nucleus` API. The result is classical open mathematics, cited above. An earlier revision of the file was compiled clean against master `c81c5cbb` (Lean `v4.33.0-rc1`); this revision adapts the header to the module system (`module` / `public import` / `@[expose] public section`).
|
t-order
new-contributor
LLM-generated
|
71/0 |
Mathlib.lean,Mathlib/Order/Nucleus/Boolean.lean |
2 |
5 |
['felixpernegger', 'github-actions'] |
nobody |
6-67004 6 days ago |
6-80747 6 days ago |
6-80627 6 days |
| 41610 |
SnirBroshi author:SnirBroshi |
chore(Logic/Relation): golf using `grind` |
---
- `comp_assoc`: 14ms to 23ms
- `IsTrans.map`: 10ms to 28ms
- `instIsPreorderOfIsTrans`: ? to 11ms
- `total_of_right_unique`: ? to 15ms
- `isTrans_join`: 10ms to 100ms
- `Quot.eqvGen_sound`: ? to ?
- `Equivalence.eqvGen_iff`: ? to 14ms
(the question marks mean that `trace.profiler` doesn't output anything, maybe they're below 1ms?)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
8/36 |
Mathlib/Logic/Relation.lean |
1 |
11 |
['SnirBroshi', 'b-mehta', 'chenson2018', 'github-actions', 'grunweg', 'leanprover-radar', 'themathqueen'] |
nobody |
6-59393 6 days ago |
8-69767 8 days ago |
9-6653 9 days |
| 41939 |
mcdoll author:mcdoll |
feat(Topology): iff version of `t2Space_of_one_sep` |
The proofs of the two directions are quite different, so merging them seemed like overkill.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
10/0 |
Mathlib/Topology/Algebra/Group/Pointwise.lean |
1 |
1 |
['github-actions'] |
nobody |
6-56581 6 days ago |
6-67728 6 days ago |
6-69740 6 days |
| 41946 |
Hilbert-beinghappy author:Hilbert-beinghappy |
feat(SetTheory/Descriptive/Tree): add infinite branches and bodies |
Motivation
The existing `tree A` API models trees as prefix-closed sets of finite
lists, together with some basic node operations (`take`, `subAt`,
`pullSub`). It had no notion of an infinite branch through such a
tree. Infinite branches and their collection, the body of a tree, are
basic vocabulary in descriptive set theory (e.g. to state that a tree
is well-founded iff its body is empty, or to talk about closed subsets
of Baire space as bodies of trees), so this is a natural extension of
the file.
Changes
* `initialSegment x n` is the list of the first `n` values of an
infinite sequence `x : ℕ → A`, with lemmas relating its length and
its behaviour when passing from `n` to `n + 1`.
* `IsBranch T x` says that `x : ℕ → A` is an infinite branch of `T`:
every finite initial segment of `x` lies in `T`.
* `body T` is the set of infinite branches of `T`, defined via
`IsBranch`.
* The auxiliary lemmas `nil_mem_of_isBranch` (a branch forces the root
`[]` to lie in `T`) and `body_mono` (`body` is monotone in the tree,
tagged `@[gcongr]`) round out the basic API.
Scope
This PR intentionally does not add closedness of `body T` (which
would require `A` to carry the discrete topology, so that `body T` is
closed in the product topology on `ℕ → A`), well-foundedness of trees
(which needs well-founded relations and descending chains), or rank
(which needs ordinal-valued rank API). These are left for follow-up
PRs, since each pulls in its own dependencies and deserves separate
review.
Verification
* `lake build Mathlib.SetTheory.Descriptive.Tree`
* `lake exe lint-style Mathlib.SetTheory.Descriptive.Tree`
* `lake build Mathlib`
AI use
I used Codex to help select this item from the
backlog, adapt the definitions to the existing `tree A` API and to the
`Descriptive.Tree` namespace and current module system (e.g. adding
the `public import` for `Mathlib.Data.List.OfFn`), draft the
implementation, and run the three verification commands above. I
checked every definition and lemma statement against its intended
mathematical meaning, and went through each proof term individually,
unfolding `initialSegment`, `IsBranch`, and `body` to confirm the
`simp`/`simpa` calls actually close the resulting goals rather than
just trusting that they compiled. |
t-set-theory |
42/1 |
Mathlib/SetTheory/Descriptive/Tree.lean |
1 |
1 |
['github-actions'] |
nobody |
6-55966 6 days ago |
6-63400 6 days ago |
6-63280 6 days |
| 41177 |
mcdoll author:mcdoll |
feat(MeasureTheory): use `IsApply` for `Measure` |
---
Sorry, I messed up a merge and the old PR went weird.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
176/202 |
Mathlib/Analysis/InnerProductSpace/NormDet.lean,Mathlib/Dynamics/Ergodic/Extreme.lean,Mathlib/Geometry/Euclidean/Volume/Measure.lean,Mathlib/MeasureTheory/Constructions/Pi.lean,Mathlib/MeasureTheory/Covering/Differentiation.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Function/SimpleFunc.lean,Mathlib/MeasureTheory/Group/FundamentalDomain.lean,Mathlib/MeasureTheory/Group/Prod.lean,Mathlib/MeasureTheory/Integral/Average.lean,Mathlib/MeasureTheory/Integral/Bochner/Basic.lean,Mathlib/MeasureTheory/Integral/Bochner/L1.lean,Mathlib/MeasureTheory/Integral/FinMeasAdditive.lean,Mathlib/MeasureTheory/Integral/SetToL1.lean,Mathlib/MeasureTheory/Measure/AEMeasurable.lean,Mathlib/MeasureTheory/Measure/AbsolutelyContinuous.lean,Mathlib/MeasureTheory/Measure/Decomposition/Exhaustion.lean,Mathlib/MeasureTheory/Measure/Decomposition/IntegralRNDeriv.lean,Mathlib/MeasureTheory/Measure/Decomposition/Lebesgue.lean,Mathlib/MeasureTheory/Measure/Dirac.lean,Mathlib/MeasureTheory/Measure/FiniteMeasure.lean,Mathlib/MeasureTheory/Measure/GiryMonad.lean,Mathlib/MeasureTheory/Measure/Haar/Basic.lean,Mathlib/MeasureTheory/Measure/Haar/DistribChar.lean,Mathlib/MeasureTheory/Measure/Haar/MulEquivHaarChar.lean,Mathlib/MeasureTheory/Measure/Hausdorff.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Measure/Lebesgue/EqHaar.lean,Mathlib/MeasureTheory/Measure/Map.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/MutuallySingular.lean,Mathlib/MeasureTheory/Measure/ProbabilityMeasure.lean,Mathlib/MeasureTheory/Measure/Prod.lean,Mathlib/MeasureTheory/Measure/Prokhorov.lean,Mathlib/MeasureTheory/Measure/Regular.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/MeasureTheory/Measure/Stieltjes.lean,Mathlib/MeasureTheory/Measure/Sub.lean,Mathlib/MeasureTheory/Measure/SubFinite.lean,Mathlib/MeasureTheory/Measure/Tilted.lean,Mathlib/MeasureTheory/Measure/Typeclasses/Finite.lean,Mathlib/MeasureTheory/Measure/Typeclasses/SFinite.lean,Mathlib/MeasureTheory/Measure/WithDensity.lean,Mathlib/MeasureTheory/Measure/WithDensityFinite.lean,Mathlib/MeasureTheory/VectorMeasure/Decomposition/Jordan.lean,Mathlib/MeasureTheory/VectorMeasure/Integral.lean,Mathlib/MeasureTheory/VectorMeasure/Prod.lean,Mathlib/MeasureTheory/VectorMeasure/Variation/Basic.lean,Mathlib/MeasureTheory/VectorMeasure/Variation/SignedMeasure.lean,Mathlib/Probability/ConditionalProbability.lean,Mathlib/Probability/Distributions/Bernoulli.lean,Mathlib/Probability/Distributions/Binomial.lean,Mathlib/Probability/Distributions/Uniform.lean,Mathlib/Probability/Kernel/Composition/Comp.lean,Mathlib/Probability/Kernel/Composition/CompProd.lean,Mathlib/Probability/Kernel/Defs.lean,Mathlib/Probability/Kernel/RadonNikodym.lean,Mathlib/Probability/UniformOn.lean |
58 |
18 |
['github-actions', 'grunweg', 'mathlib-merge-conflicts', 'mcdoll'] |
grunweg assignee:grunweg |
6-55283 6 days ago |
6-56538 6 days ago |
20-63107 20 days |
| 41947 |
hawkrobe author:hawkrobe |
feat(Order/Antisymmetrization): comparable minimal elements are equivalent |
Adds `Minimal.antisymmRel_of_ge` and `Minimal.antisymmRel_of_symmGen` at preorder generality.
---
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-order
|
32/3 |
Mathlib/Order/Antisymmetrization.lean |
1 |
2 |
['github-actions'] |
nobody |
6-53385 6 days ago |
6-57471 6 days ago |
6-57351 6 days |
| 41943 |
xroblot author:xroblot |
feat(RingTheory/Ideal/HasFiniteQuotients): Finite instance for a quotient by a nonzero ideal |
Add an instance deriving `Finite (R ⧸ I)` from `[Ring.HasFiniteQuotients R]` and `[NeZero I]`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
5/1 |
Mathlib/NumberTheory/NumberField/Cyclotomic/Galois.lean,Mathlib/RingTheory/Ideal/Quotient/HasFiniteQuotients.lean |
2 |
11 |
['github-actions', 'leanprover-radar', 'xroblot'] |
nobody |
6-48051 6 days ago |
6-68106 6 days ago |
6-67986 6 days |
| 41651 |
xroblot author:xroblot |
feat(GroupTheory): coatoms of the subgroup lattice |
Add two group-theory results on maximal subgroups (coatoms of the subgroup lattice), plus a small API change:
- `isCyclic_of_isCoatom_subsingleton`: a group with at most one maximal subgroup is cyclic.
- `CommGroup.isSimpleGroup_iff_isCoatom`: a subgroup of a commutative group is maximal iff the quotient by it is simple.
- `comapMk'OrderIso`: retype the codomain of the correspondence-theorem order isomorphism to `Set.Ici N`, making the order API available (also it mirrors `Submodule.comapMkQRelIso`). The two codomains are defeq and there are no use.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-group-theory |
26/1 |
Mathlib/GroupTheory/QuotientGroup/Basic.lean,Mathlib/GroupTheory/SpecificGroups/Cyclic.lean |
2 |
11 |
['SnirBroshi', 'b-mehta', 'github-actions', 'mathlib-merge-conflicts', 'plp127', 'xroblot'] |
nobody |
6-43027 6 days ago |
10-39898 10 days ago |
10-39935 10 days |
| 41496 |
kebekus author:kebekus |
feat: companion lemmas to `MeromorphicOn.exists_ecanonicalDecomp`, API for the extended canonical decomposition |
To prepare for the proof of the classic Poisson-Jensen formula in the next PR, establish several companion lemmas to `MeromorphicOn.exists_ecanonicalDecomp` that provide an API for using the extended canonical decomposition introduced in #40191.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
174/1 |
Mathlib/Analysis/Complex/CanonicalDecomposition.lean |
1 |
11 |
['github-actions', 'j-loreaux', 'kebekus'] |
nobody |
6-39279 6 days ago |
6-39279 6 days ago |
15-64582 15 days |
| 41949 |
xroblot author:xroblot |
feat(Logic/Basic): add Subtype.subsingleton_iff |
Add `Subtype.subsingleton_iff`: `Subsingleton (Subtype p) ↔ ∀ a b, p a → p b → a = b`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
7/5 |
Mathlib/Algebra/Homology/ComplexShape.lean,Mathlib/Logic/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
6-39107 6 days ago |
6-42219 6 days ago |
6-42865 6 days |
| 37934 |
Thmoas-Guan author:Thmoas-Guan |
feat(FieldTheory): definition of transcendental separable field extension |
In this PR, we introduce the concept of separably generated field extension and transcendental separable field extension.
Further properties will be in #37838
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
102/0 |
Mathlib.lean,Mathlib/FieldTheory/TranscendentalSeparable.lean |
2 |
14 |
['Thmoas-Guan', 'github-actions', 'robin-carlier'] |
riccardobrasca assignee:riccardobrasca |
6-38375 6 days ago |
77-17263 77 days ago |
85-35320 85 days |
| 41556 |
Thmoas-Guan author:Thmoas-Guan |
feat(RingTheory): add lemmas about `reesAlgebra` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
large-import
|
40/1 |
Mathlib/RingTheory/ReesAlgebra.lean |
1 |
4 |
['github-actions', 'vlad902'] |
nobody |
6-38157 6 days ago |
16-61831 16 days ago |
16-61711 16 days |
| 39075 |
Thmoas-Guan author:Thmoas-Guan |
feat(Algebra/CommRingCat): colimit of local ring via local hom |
In this PR, we deal with filtered colimit of local ring via local homomorphisms, proving it is
again local, with maximal ideal equal to the union of images of maximal ideals.
Further more, we proved their residue field is colimit too (in category of local ring, residue field functor preserve colimit).
Co-authored-by: Wang Jingting <wangjt2020@163.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
211/0 |
Mathlib.lean,Mathlib/Algebra/Category/Ring/FilteredColimitsLocal.lean |
2 |
3 |
['Thmoas-Guan', 'github-actions', 'riccardobrasca'] |
joelriou assignee:joelriou |
6-36321 6 days ago |
14-57353 14 days ago |
79-22183 79 days |
| 41817 |
kebekus author:kebekus |
feat: derivative of the Cauchy integral |
If `g` is circle integrable and `w` lies inside the circle, establish that the Cauchy-type integral `fun w ↦ ∮ z in C(c, R), (z - w)⁻¹ • g z` has derivative `∮ z in C(c, R), ((z - w) ^ 2)⁻¹ • g z` at `w`.
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
LLM-generated
|
75/0 |
Mathlib/Analysis/Complex/CauchyIntegral.lean |
1 |
3 |
['github-actions', 'j-loreaux', 'kebekus'] |
nobody |
6-35953 6 days ago |
10-18920 10 days ago |
10-18800 10 days |
| 40926 |
Thmoas-Guan author:Thmoas-Guan |
feat(LinearAlgebra): lemmas for `exteriorPower.map` |
Lemmas for `exteriorPower.map`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
9/0 |
Mathlib/LinearAlgebra/ExteriorPower/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
6-34926 6 days ago |
33-39003 33 days ago |
33-38883 33 days |
| 40927 |
Thmoas-Guan author:Thmoas-Guan |
feat(LinearAlgebra): lemmas for vanishing of exteriorPower |
For a module generated by `n` elements, exterior power of order greater than `n` vanishes.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
26/0 |
Mathlib/LinearAlgebra/ExteriorPower/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
6-34909 6 days ago |
33-38193 33 days ago |
33-38641 33 days |
| 40948 |
Thmoas-Guan author:Thmoas-Guan |
feat(LinearAlgebra): exterior power commute with base change |
In this PR, we added the commute of exterior power and base change.
AI usage: filling in construction of the final equivalence with lemmas decribing it, all the preliminary constructions are refactored by human later.
Co-authored-by: Zichen Wang <zichenwang25@stu.pku.edu.cn>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
label:t-algebra$ |
231/0 |
Mathlib.lean,Mathlib/LinearAlgebra/ExteriorPower/BaseChange.lean |
2 |
2 |
['github-actions', 'grunweg'] |
nobody |
6-34428 6 days ago |
15-28544 15 days ago |
33-18325 33 days |
| 33664 |
ooovi author:ooovi |
feat(Geometry/Convex/Cone/Pointed): face lattice of pointed cones |
- Define PointedCone.IsFaceOf, for a pointed cone being a face of another pointed cone.
- Prove some basic properties, that faces are extreme sets of their cone, and how they behave under intersection, map and product operations.
- Define `Face` by bundling the `IsFaceOf` structure, and show the complete lattice structure on it.
- Prove that taking the product of two faces is an order isomorphism.
Co-authored-by: Martin Winter
---
- [x] depends on: #33780 for the definition of the lineal space
- [x] depends on: #39185 for `isFaceOf`
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-convex-geometry
maintainer-merge
|
202/0 |
Mathlib.lean,Mathlib/Geometry/Convex/Cone/Face/Lattice.lean |
2 |
204 |
['YaelDillies', 'eric-wieser', 'github-actions', 'martinwintermath', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'ooovi', 'vihdzp'] |
nobody |
6-34271 6 days ago |
6-35011 6 days ago |
12-29860 12 days |
| 41026 |
Thmoas-Guan author:Thmoas-Guan |
feat(LinearAlgebra): exterior algebra of product module |
In this PR, we proved the exterior algebra of product module is isomorphic to graded tensor product of the two exterior algebras.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
151/0 |
Mathlib.lean,Mathlib/LinearAlgebra/ExteriorAlgebra/Basic.lean,Mathlib/LinearAlgebra/ExteriorAlgebra/Product.lean |
3 |
3 |
['eric-wieser', 'github-actions'] |
nobody |
6-34085 6 days ago |
31-33042 31 days ago |
31-32922 31 days |
| 40922 |
Thmoas-Guan author:Thmoas-Guan |
feat(Algebra/Module): minimal generators of module over local ring |
In this PR, we proved for fg module over local ring, "two set of minimal generators can be transported by an invertible matrix", implemented as the commuting morphism between the source of the two surjection must be bijective.
(The last lemma is for transport between Koszul complex form two set of generators)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
93/0 |
Mathlib.lean,Mathlib/Algebra/Module/MinimalGenerators.lean |
2 |
1 |
['github-actions'] |
nobody |
6-33865 6 days ago |
33-42893 33 days ago |
33-42773 33 days |
| 41942 |
felixpernegger author:felixpernegger |
style: add missing spaces |
This PR adds some missing spaces per style guide (and removes some bad commas)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
161/161 |
Mathlib/Algebra/BigOperators/Pi.lean,Mathlib/Algebra/Category/MonCat/FilteredColimits.lean,Mathlib/Algebra/Lie/Prod.lean,Mathlib/Algebra/Module/Presentation/Basic.lean,Mathlib/Algebra/Module/Torsion/Basic.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/Algebra/Polynomial/Roots.lean,Mathlib/AlgebraicGeometry/AffineSpace.lean,Mathlib/AlgebraicGeometry/ProjectiveSpectrum/Proper.lean,Mathlib/AlgebraicTopology/ModelCategory/Opposite.lean,Mathlib/Analysis/Analytic/Within.lean,Mathlib/Analysis/Convex/TotallyBounded.lean,Mathlib/Analysis/LocallyConvex/Basic.lean,Mathlib/Analysis/SpecialFunctions/Log/InvLog.lean,Mathlib/Analysis/SpecialFunctions/Log/RpowTendsto.lean,Mathlib/CategoryTheory/Abelian/SerreClass/Localization.lean,Mathlib/CategoryTheory/Comma/Over/Basic.lean,Mathlib/CategoryTheory/EpiMono.lean,Mathlib/CategoryTheory/Filtered/Final.lean,Mathlib/CategoryTheory/Filtered/Small.lean,Mathlib/CategoryTheory/Functor/Currying.lean,Mathlib/CategoryTheory/Grothendieck.lean,Mathlib/CategoryTheory/Limits/Shapes/Products.lean,Mathlib/CategoryTheory/Monad/Basic.lean,Mathlib/CategoryTheory/Preadditive/Injective/Basic.lean,Mathlib/CategoryTheory/Products/Basic.lean,Mathlib/CategoryTheory/Sites/Coherent/CoherentTopology.lean,Mathlib/CategoryTheory/Sites/Coherent/ExtensiveSheaves.lean,Mathlib/CategoryTheory/Sites/Coherent/ExtensiveTopology.lean,Mathlib/CategoryTheory/Sites/Continuous.lean,Mathlib/CategoryTheory/Sites/EffectiveEpimorphic.lean,Mathlib/Combinatorics/Matroid/Basic.lean,Mathlib/Combinatorics/Matroid/Circuit.lean,Mathlib/Combinatorics/Matroid/Closure.lean,Mathlib/Combinatorics/Matroid/Dual.lean,Mathlib/Combinatorics/Matroid/Loop.lean,Mathlib/Combinatorics/Matroid/Map.lean,Mathlib/Combinatorics/Matroid/Minor/Contract.lean,Mathlib/Combinatorics/Matroid/Minor/Restrict.lean,Mathlib/Combinatorics/Matroid/Rank/ENat.lean,Mathlib/Combinatorics/Matroid/Sum.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Control/LawfulFix.lean,Mathlib/Data/Finset/Insert.lean,Mathlib/Data/Fintype/EquivFin.lean,Mathlib/Data/Fintype/Perm.lean,Mathlib/Data/Set/Card.lean,Mathlib/Data/Set/Finite/Lattice.lean,Mathlib/Data/Set/Insert.lean,Mathlib/FieldTheory/Galois/Infinite.lean,Mathlib/Lean/Meta.lean,Mathlib/LinearAlgebra/AffineSpace/AffineSubspace/Basic.lean,Mathlib/LinearAlgebra/LinearIndependent/Lemmas.lean,Mathlib/LinearAlgebra/Matrix/Ideal.lean,Mathlib/LinearAlgebra/Matrix/PosDef.lean,Mathlib/Logic/Encodable/Basic.lean,Mathlib/Logic/Equiv/Sum.lean,Mathlib/MeasureTheory/Function/UnifTight.lean,Mathlib/MeasureTheory/VectorMeasure/SetIntegral.lean,Mathlib/MeasureTheory/VectorMeasure/WithDensityVec.lean,Mathlib/ModelTheory/Definability.lean,Mathlib/ModelTheory/ElementarySubstructures.lean,Mathlib/NumberTheory/JacobiSum/Basic.lean,Mathlib/Order/Atoms.lean,Mathlib/Order/Filter/Finite.lean,Mathlib/Order/KrullDimension.lean,Mathlib/Order/ScottContinuity.lean,Mathlib/Order/WithBot.lean,Mathlib/RepresentationTheory/Homological/GroupCohomology/LowDegree.lean,Mathlib/RepresentationTheory/Intertwining.lean,Mathlib/RingTheory/GradedAlgebra/HomogeneousLocalization.lean,Mathlib/RingTheory/RootsOfUnity/Basic.lean,Mathlib/RingTheory/Smooth/Basic.lean,Mathlib/RingTheory/Valuation/ValuativeRel/Basic.lean,Mathlib/Tactic/FunProp/Core.lean,Mathlib/Tactic/FunProp/Decl.lean,Mathlib/Tactic/FunProp/Elab.lean,Mathlib/Tactic/FunProp/FunctionData.lean,Mathlib/Tactic/FunProp/Mor.lean,Mathlib/Tactic/FunProp/Theorems.lean,Mathlib/Tactic/FunProp/ToBatteries.lean,Mathlib/Tactic/Linarith/Datatypes.lean,Mathlib/Tactic/MkIffOfInductiveProp.lean,Mathlib/Tactic/NormNum/Basic.lean,Mathlib/Tactic/NormNum/Inv.lean,Mathlib/Tactic/ProdAssoc.lean,Mathlib/Tactic/SplitIfs.lean,Mathlib/Topology/Algebra/ContinuousMonoidHom.lean,Mathlib/Topology/CWComplex/Classical/Basic.lean,Mathlib/Topology/Category/CompHaus/EffectiveEpi.lean,Mathlib/Topology/Category/CompHausLike/Limits.lean,Mathlib/Topology/Category/Profinite/Nobeling/Span.lean,Mathlib/Topology/Category/Profinite/Nobeling/Successor.lean,Mathlib/Topology/Category/Profinite/Nobeling/ZeroLimit.lean,Mathlib/Topology/Category/Stonean/Basic.lean,Mathlib/Topology/Connected/Clopen.lean,Mathlib/Topology/Homotopy/Lifting.lean,Mathlib/Topology/Irreducible.lean,Mathlib/Topology/LocallyFinsupp.lean |
99 |
2 |
['github-actions', 'grunweg'] |
nobody |
6-26004 6 days ago |
6-67916 6 days ago |
6-68064 6 days |
| 41828 |
archiebrowne author:archiebrowne |
feat(RingTheory/HopfAlgebra/Convolution): add `ofAntipodeOfAdjoin` |
Adds `HopfAlgebra.ofAntipodeOfAdjoin`, which upgrades a bialgebra `A` to a Hopf
algebra given an algebra anti-homomorphism `S : A →ₐ[R] Aᵐᵒᵖ` that satisfies the
two antipode identities *only on a generating set* `X` with `adjoin R X = ⊤`.
Main additions (`Mathlib/RingTheory/HopfAlgebra/Basic.lean`):
* `HopfAlgebra.mul_antipode_rTensor_comul_adjoin_top` /
`HopfAlgebra.mul_antipode_lTensor_comul_adjoin_top`: the antipode axioms hold on
all of `A` when they hold on a generating set.
* `HopfAlgebra.ofAntipodeOfAdjoin`: the resulting `HopfAlgebra R A` structure,
with `antipode := (opLinearEquiv R).symm.toLinearMap ∘ₗ S.toLinearMap`.
Also in (`Mathlib/RingTheory/HopfAlgebra/Convolution.lean`):
* Golf `antipode_mul_id`, `id_mul_antipode`, and `antipode_id_cancel`.
* Add `id_antipode_cancel` (mirror of `antipode_id_cancel`). |
t-ring-theory
new-contributor
|
89/9 |
Mathlib/RingTheory/HopfAlgebra/Convolution.lean |
1 |
2 |
['github-actions'] |
nobody |
6-12464 6 days ago |
10-2567 10 days ago |
10-3489 10 days |
| 33247 |
sun123zxy author:sun123zxy |
feat(Mathlib/RingTheory/Ideal/Cotangent): dimension of cotangent spaces |
It is shown that the span rank of the maximal ideal of a local ring equals the dimension of the cotangent space
if the maximal ideal is finitely generated.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [ ] depends on: #33359
- [ ] depends on: #33361
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-ring-theory
|
39/0 |
Mathlib/RingTheory/Ideal/Cotangent.lean |
1 |
16 |
['erdOne', 'github-actions', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot', 'sun123zxy', 'vlad902'] |
alreadydone assignee:alreadydone |
6-11344 6 days ago |
18-84134 18 days ago |
53-19525 53 days |
| 41913 |
peabrainiac author:peabrainiac |
chore(Data/Set): move lemmas from `Set.Disjoint` to `Disjoint` |
Move three lemmas from the `Set.Disjoint` namespace to the `Disjoint` namespace to enable dot notation.
We do not add deprecation aliases since the lemmas only get moved, not renamed, and having both the lemmas and their deprecated aliases available inside the `Set` namespace could lead to trouble.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
4/3 |
Mathlib/Data/Set/Prod.lean |
1 |
5 |
['SnirBroshi', 'github-actions', 'peabrainiac'] |
nobody |
6-9528 6 days ago |
7-60034 7 days ago |
7-59914 7 days |
| 41960 |
qawbecrdtey author:qawbecrdtey |
chore(Topology/Order): cleanup imports |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Cleaned imports of `Mathlib.Topology.Order`.
+ Two exceptional files in `Mathlib.Order`.
[](https://gitpod.io/from-referrer/)
|
t-topology |
4/20 |
Mathlib/Order/Filter/AtTopBot/Archimedean.lean,Mathlib/Order/Filter/Cofinite.lean,Mathlib/Topology/Order/Basic.lean,Mathlib/Topology/Order/Bornology.lean,Mathlib/Topology/Order/Compact.lean,Mathlib/Topology/Order/Completion.lean,Mathlib/Topology/Order/HullKernel.lean,Mathlib/Topology/Order/IntermediateValue.lean,Mathlib/Topology/Order/IsLUB.lean,Mathlib/Topology/Order/Lattice.lean,Mathlib/Topology/Order/LawsonTopology.lean,Mathlib/Topology/Order/LeftRightLim.lean,Mathlib/Topology/Order/LiminfLimsup.lean,Mathlib/Topology/Order/LowerUpperTopology.lean,Mathlib/Topology/Order/MonotoneContinuity.lean,Mathlib/Topology/Order/PartialSups.lean,Mathlib/Topology/Order/Priestley.lean,Mathlib/Topology/Order/Rolle.lean,Mathlib/Topology/Order/WithTop.lean |
19 |
4 |
['github-actions', 'leanprover-radar', 'qawbecrdtey'] |
nobody |
6-8410 6 days ago |
6-10414 6 days ago |
6-10314 6 days |
| 41769 |
mckoen author:mckoen |
feat(CategoryTheory/Abelian/Subobject): correspondence theorem for subobjects in abelian categories |
Given a subobject `Y` of `X` in an abelian category, we construct an order-isomorphism between subobjects of the "quotient" `X/Y := cokernel (Y ↪ X)` and subobjects of `X` containing `Y`.
Following Popescu's "Abelian Categories with Applications to Rings and Modules", a morphism `f : X ⟶ Y` induces a functor `Subobject X ⥤ Subobject Y` by `X' ↦ kernel (cokernel.π (X'.arrow ≫ f))`, and a functor `Subobject Y ⥤ Subobject X` by `Y' ↦ kernel (f ≫ cokernel.π Y'.arrow)`. We show these are equivalent to the existing, generic `Subobject.exists` and `Subobject.pullback` functors, and use these to define the correspondence.
Some miscellaneous API is also added.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
269/8 |
Mathlib/CategoryTheory/Abelian/Basic.lean,Mathlib/CategoryTheory/Abelian/Subobject.lean,Mathlib/CategoryTheory/Subobject/Basic.lean,Mathlib/CategoryTheory/Subobject/Lattice.lean,Mathlib/CategoryTheory/Subobject/Limits.lean,docs/references.bib |
6 |
6 |
['github-actions', 'justus-springer', 'mckoen', 'tb65536'] |
nobody |
6-5544 6 days ago |
10-21695 10 days ago |
10-85281 10 days |
| 37745 |
AntoineChambert-Loir author:AntoineChambert-Loir |
feat(RingTheory/AugmentationIdeal): base change for augmentation ideals |
Base change for augmentation ideals
Co-authored with: @mariainesdff
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37744
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
large-import
label:t-algebra$ |
441/1 |
Mathlib.lean,Mathlib/Algebra/Algebra/Hom.lean,Mathlib/Algebra/Algebra/Subalgebra/Basic.lean,Mathlib/Algebra/Module/Submodule/Range.lean,Mathlib/LinearAlgebra/Projection.lean,Mathlib/LinearAlgebra/Span/Defs.lean,Mathlib/LinearAlgebra/TensorProduct/Projection.lean,Mathlib/LinearAlgebra/TensorProduct/RightExactness.lean,Mathlib/LinearAlgebra/TensorProduct/Submodule.lean,Mathlib/Order/Disjoint.lean,Mathlib/RingTheory/Ideal/IsAugmentation.lean,Mathlib/RingTheory/TensorProduct/Basic.lean |
12 |
18 |
['AntoineChambert-Loir', 'dagurtomas', 'github-actions', 'mathlib-dependent-issues'] |
alreadydone assignee:alreadydone |
5-67148 5 days ago |
72-30327 72 days ago |
73-4183 73 days |
| 38594 |
ScottCarnahan author:ScottCarnahan |
feat(Algebra/Lie): grading on loop algebras |
In this PR we introduce a decomposition of a tensor product of modules induced by a decomposition of the module on the left side. This is used to produce the canonical "energy" grading on a loop Lie algebra. This will (eventually) give us the "energy" grading on smooth representations of affine algebras.
---
Should I make the tensor decomposition more ring-polymorphic?
- [x] depends on: #41550
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
135/9 |
Mathlib/Algebra/Lie/Loop.lean,Mathlib/LinearAlgebra/DirectSum/TensorProduct.lean,Mathlib/LinearAlgebra/TensorProduct/Decomposition.lean |
3 |
16 |
['ScottCarnahan', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib-splicebot', 'themathqueen'] |
joelriou assignee:joelriou |
5-67146 5 days ago |
8-42706 8 days ago |
55-11880 55 days |
| 39687 |
TentativeConvert author:TentativeConvert |
feat(Algebra/Group/Submonoid): type class to indicate that supremum in a SubmonoidClass agrees with supremum of submonoids |
Add a type class `SubmonoidClass.IsConcreteSSup` to indicate that the canonical map `.ofClass` from a class `S` of submonoids of `M` to `Submonoid M` preserves suprema.
---
This PR implements the minimal type class assumption needed to make „pushfoward of gradings along maps of indexing sets“ – see draft PR #39356 – work in some `SetLike` generality.
Given `{S M : Type*} [SetLike S M] [Monoid M] [SubmonoidClass S M]`, we have canonical maps
```
S → Submonoid M → Set M
```
The first is `Submonoid.ofClass`, the second and the composition are `coe` maps coming from the `SetLike` structures. Depending on `S`, these maps may or may not satisfy various properties with respect the lattice structures on `Submonoid M` and `Set M`. Mathlib so far includes the type class `[IsConcreteLE S M]`, which asserts that the composition `S → Set M` is order-preserving and order-reflecting. The type class defined here asserts that the first map, `S → Submonoid M`, preserves suprema.
In examples such as `S = Subgroup M`, `S = Submodule R M`, much more is true – in these cases, `S` is a complete sublattice of `Submonoid M`. But there are also examples where only the weaker property defined here holds, e.g. `S = OpenSubgroup M` for a topological group `M`.
Note on `outParam`: I did *not* write `(M : outParam Type*)` in the assumptions of `SubmonoidClass.IsConcreteSSup` in accordance with the [DocString of `Setlike`](https://leanprover-community.github.io/mathlib4_docs/Mathlib/Data/SetLike/Basic.html#SetLike). However, we do have `(B : outParam Type*)` in the definition of `IsConcreteLE`, so perhaps I'm misinterpreting the DocString.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebra
label:t-algebra$ |
56/0 |
Mathlib.lean,Mathlib/Algebra/Group/Submonoid/SSup.lean |
2 |
2 |
['github-actions'] |
joelriou assignee:joelriou |
5-67145 5 days ago |
65-34707 65 days ago |
65-35187 65 days |
| 39818 |
Ljon4ik4 author:Ljon4ik4 |
feat: Transferring Lie Algebra structures along Equivalences |
This pr adds the functionality to transfer Lie brackets along equivalences (additive, linear and plain ones).
I followed the scheme of the existing `TransferInstance.lean` file.
For one of the proofs, I also needed `linearEquiv_apply `, which seemed missing so I added it.
AI use disclaimer: I used claude to search for lemmas/ understand error messages / proofreading and feedback, but wrote the whole code myself.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
124/0 |
Mathlib.lean,Mathlib/Algebra/Lie/TransferInstance.lean,Mathlib/Algebra/Module/TransferInstance.lean |
3 |
3 |
['github-actions', 'mathlib-merge-conflicts'] |
ocfnash assignee:ocfnash |
5-67144 5 days ago |
9-38677 9 days ago |
61-83896 61 days |
| 40537 |
SnkXyx author:SnkXyx |
feat(Algebra/MvPolynomial/Variables): define main degree |
This PR defines the **main degree** of a multivariate polynomial:
* `MvPolynomial.mainDegree p : Multiset σ` :
When `σ` is a linear order, `mainDegree p` is the multiset consisting of the maximal variable
among all variables appearing in `p`, appearing with its largest multiplicity among all monomials
in `p`.
The definition was originally developed in PR #36103 as part of the formalization of the Characteristic Set Method (Wu-Ritt Method). The Characteristic Set project aims to formalize the algorithmic method for solving systems of multivariate polynomial equations in Lean 4, providing foundational infrastructure for algebraic geometry based on triangular decomposition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
112/23 |
Mathlib/Algebra/MvPolynomial/CommRing.lean,Mathlib/Algebra/MvPolynomial/Degrees.lean,Mathlib/Algebra/MvPolynomial/Equiv.lean,Mathlib/Algebra/MvPolynomial/SchwartzZippel.lean,Mathlib/Algebra/MvPolynomial/Variables.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/RingTheory/MvPolynomial/Basic.lean,Mathlib/RingTheory/MvPolynomial/Homogeneous.lean,Mathlib/RingTheory/MvPolynomial/MonomialOrder/DegLex.lean,Mathlib/RingTheory/MvPowerSeries/Trunc.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Spectrum/Prime/ChevalleyComplexity.lean |
12 |
14 |
['SnkXyx', 'faenuccio', 'github-actions', 'mathlib-merge-conflicts', 'vlad902'] |
nobody |
5-66247 5 days ago |
28-27158 28 days ago |
36-57253 36 days |
| 40648 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/MeasurableSpace/Constructions): remove some defeq abuse |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
7/2 |
Mathlib/MeasureTheory/MeasurableSpace/Constructions.lean,Mathlib/Order/Disjointed.lean |
2 |
2 |
['github-actions', 'wwylele'] |
nobody |
5-66245 5 days ago |
40-65864 40 days ago |
40-65762 40 days |
| 41964 |
roos-j author:roos-j |
feat(MeasureTheory/Integral): second mean value theorem for integration |
Add second mean value theorem for integration, including an inequality variant for Banach-space valued functions.
---
This should be of general enough interest to need no justification, but as one specific application I need this as a prerequisite for appropriately generalizing the first-order case in https://github.com/leanprover-community/mathlib4/pull/39406
Some explanatory notes about the choices made. These may not belong into the documentation but we can add any subset of them if desired:
- Unlike the first mean value theorem, this one is specific to `intervalIntegral` and does not have the same natural generalization to integrals on connected sets.
- There are various formulations in the literature. In particular, there is a version featuring a one-sided limit of `f` at the endpoint on the right-hand side instead, and there is also a version without the non-negativity requirement which instead has two terms on the right-hand side. Each variant has their slight pros and cons. The present formulation is one of these and was chosen simply because it is the one most convenient for my purpose. Others can be added in the future if people need/want them.
- As is well-known, for vector-valued functions the identity generally fails, but one can show an inequality. I only need this for the complex-valued case, but I generalized it to functions taking values in a real Banach space. The argument uses the Hahn-Banach theorem and must be well-known, but I don't have a reference for it. There is of course also a version for the first mean value theorem, which is not part of this PR.
[](https://gitpod.io/from-referrer/)
|
t-analysis
t-measure-probability
|
192/5 |
Mathlib/MeasureTheory/Integral/IntervalIntegral/MeanValue.lean,docs/references.bib |
2 |
1 |
['github-actions'] |
nobody |
5-62009 5 days ago |
5-62552 5 days ago |
5-62700 5 days |
| 41880 |
mbkybky author:mbkybky |
feat(CategoryTheory/ObjectProperty): define objects admitting finite resolutions by objects satisfying `P : ObjectProperty C` |
Let `C` be a category, `P : ObjectProperty C` be a property of objectsin `C`. We say that `X : C` has a `P`-resolution of length `n` if there exists an exact sequence `0 ⟶ Eₙ ⟶ ⋯ ⟶ E₀ ⟶ X ⟶ 0` such that each `Eᵢ : C` satisfies `P`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
147/0 |
Mathlib.lean,Mathlib/CategoryTheory/ObjectProperty/HasFiniteResolution/Basic.lean |
2 |
8 |
['github-actions', 'joelriou'] |
nobody |
5-56024 5 days ago |
5-56024 5 days ago |
7-11736 7 days |
| 41967 |
peakpoint author:peakpoint |
feat(Data/Set/Finite): `Set.Finite.sigma` |
---
might be worth extracting the corresponding lemma for pi types too
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
37/0 |
Mathlib.lean,Mathlib/Data/Set/Finite/Sigma.lean |
2 |
1 |
['github-actions'] |
nobody |
5-48559 5 days ago |
5-49109 5 days ago |
5-52363 5 days |
| 41860 |
tb65536 author:tb65536 |
feat(GroupTheory/Index): formula for index of centralizer of an element |
This PR proves the formula for the index of the centralizer of an element.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-group-theory
label:t-algebra$ |
23/1 |
Mathlib/GroupTheory/GroupAction/Basic.lean,Mathlib/GroupTheory/Index.lean |
2 |
3 |
['github-actions', 'plp127', 'tb65536'] |
nobody |
5-44430 5 days ago |
9-17136 9 days ago |
9-17017 9 days |
| 41961 |
loefflerd author:loefflerd |
feat(NumberTheory/Padics): abstract theory of measures, part II |
Define the Iwasawa algebra of measures on a profinite group G, and show it's an algebra (and commutative if G is).
---
For simplicity, I did not attempt to optimise exactly the minimal typeclass assumptions on `G` required to obtain each typeclass property of `D(G, R)`, as this led to much lengthier code for no clear benefit; I am not aware of interesting examples where `G` is not at a monoid.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
164/0 |
Mathlib.lean,Mathlib/NumberTheory/Padics/Measure/Group.lean |
2 |
2 |
['github-actions'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
5-38693 5 days ago |
5-86258 5 days ago |
5-86138 5 days |
| 37959 |
artie2000 author:artie2000 |
feat(LinearAlgebra/Dimension/Free): isomorphic to base ring iff rank is one |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
maintainer-merge
label:t-algebra$ |
18/10 |
Mathlib/LinearAlgebra/Dimension/Free.lean |
1 |
30 |
['artie2000', 'github-actions', 'mathlib-merge-conflicts', 'themathqueen'] |
themathqueen assignee:themathqueen |
5-33662 5 days ago |
6-12446 6 days ago |
28-72477 28 days |
| 41663 |
korbonits author:korbonits |
feat(Topology/Connected): local (path-)connectedness of products and pi types |
Add product and pi instances for `LocallyConnectedSpace` and `LocallyPathConnectedSpace`, together with a full characterization of local (path-)connectedness of pi types:
- `Prod.locallyConnectedSpace` / `Prod.locallyPathConnectedSpace`: binary products.
- `Pi.locallyConnectedSpace_of_finite_nonpreconnected` / `Pi.locallyPathConnectedSpace_of_finite_nonpathconnected`: a product of locally (path-)connected spaces is locally (path-)connected provided all but finitely many factors are preconnected (resp. path-connected). The `Finite ι` and all-factors-preconnected (resp. path-connected) instances are corollaries.
- `Pi.locallyConnectedSpace_iff` / `Pi.locallyPathConnectedSpace_iff`: a product is locally (path-)connected iff it is empty or the above conditions hold.
- `Topology.IsQuotientMap.locallyConnectedSpace`: quotients of locally connected spaces are locally connected (used for the forward direction via the projections; the analogous `IsQuotientMap.locallyPathConnectedSpace` already existed).
---
Follow-up to #40092.
AI disclosure
- level: Level 5 / Level 6 in [the link shared](https://www.visidata.org/blog/2026/ai/#self-assessed-ai-level-for-contributions) -- I feel confident about the math but I am still learning Lean itself
- code: most of the Lean in this PR was drafted by Claude Code (statements, proofs, docstrings).
- direction and review: I chose the contribution, made the decisions (e.g., PathConnectedSpace for the path-side hypothesis, strengthening the helper to quotient maps, deferring Quot instances), reviewed every line, and wrote all GitHub/Zulip comments.
- testing: I ran local `lake build` of files and `lake env lean` of some test files (uncommitted) |
t-topology
new-contributor
LLM-generated
|
184/0 |
Mathlib/Topology/Connected/Basic.lean,Mathlib/Topology/Connected/LocallyConnected.lean,Mathlib/Topology/Connected/LocallyPathConnected.lean |
3 |
25 |
['CoolRmal', 'github-actions', 'grunweg', 'korbonits'] |
CoolRmal assignee:CoolRmal |
5-15325 5 days ago |
5-42189 5 days ago |
10-43959 10 days |
| 40344 |
FMLJohn author:FMLJohn |
feat(RingTheory/Adjoin/Polynomial/Basic): `Algebra.adjoin_mem_exists_aeval'` and `Algebra.adjoin_eq_exists_aeval'` |
In this pull request, I have proved the following result:
Suppose `R` and `A` are commutative semirings with `Algebra R A`, `S` is a subset of `A`, `a` is an element of `A` that belongs to `adjoin R S`, and `f : σ → A` satisfies `S ⊆ Set.range f`, then there exists a multivariate polynomial `p : MvPolynomial σ R` such that `p.aeval f = a`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/) |
t-ring-theory |
19/0 |
Mathlib/RingTheory/Adjoin/Polynomial/Basic.lean |
1 |
4 |
['github-actions', 'plp127'] |
nobody |
5-4259 5 days ago |
48-801 48 days ago |
48-20639 48 days |
| 40180 |
FMLJohn author:FMLJohn |
feat(Topology/Spectral/ConstructibleTopology): the constructible topology on a compact quasi-separated space `X` equals the topology generated by the constructible subsets of `X` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
In this pull request, I have proved that the constructible topology on a compact quasi-separated space `X` equals the topology generated by the constructible subsets of `X`. This holds in particular for spectral spaces. |
t-topology |
84/2 |
Mathlib.lean,Mathlib/Order/BooleanSubalgebra.lean,Mathlib/Topology/Order/GenerateFromLattice.lean,Mathlib/Topology/Spectral/ConstructibleTopology.lean |
4 |
23 |
['FMLJohn', 'chrisflav', 'github-actions', 'plp127'] |
PatrickMassot and chrisflav assignee:PatrickMassot assignee:chrisflav |
5-2525 5 days ago |
5-3477 5 days ago |
41-80844 41 days |
| 41991 |
dahlem author:dahlem |
fix(Analysis/Matrix): anchor the elementwise matrix norm's topology to instTopologicalSpaceMatrix |
With `open scoped Matrix.Norms.Elementwise`,
```lean
noncomputable example {m n : Type*} [Fintype m] [Fintype n] :
Norm (Matrix m n ℝ →L[ℝ] Matrix m n ℝ) := inferInstance
```
fails to synthesize, even though the norm-induced topology on `Matrix m n ℝ` is definitionally equal to the ambient `instTopologicalSpaceMatrix` (`rfl` proves the equality).
What goes wrong: the `→L[ℝ]` type is elaborated with the *direct* instance `instTopologicalSpaceMatrix`, while `ContinuousLinearMap.hasOpNorm`'s conclusion carries topologies that are *projections* of its `SeminormedAddCommGroup` arguments. During resolution, pending synthesis does find `Matrix.seminormedAddCommGroup`, but the projected topology then has to unify with `instTopologicalSpaceMatrix`, and the projection chain through `fast_instance% Pi.seminormedAddCommGroup` does not reduce to the same term. (Types like `ℝ` or `EuclideanSpace` don't hit this because they have no direct `TopologicalSpace` instance competing with the projection path — matrices do.)
**Fix**: anchor the topology field of `Matrix.seminormedAddCommGroup` / `Matrix.normedAddCommGroup` to `instTopologicalSpaceMatrix` via `PseudoMetricSpace.replaceTopology` / `MetricSpace.replaceTopology` with `rfl` proofs — the standard forgetful-inheritance pattern; the Frobenius family in the same file already achieves this through `PiLp.seminormedAddCommGroupToPi`. Anchoring to a freshly-elaborated `inferInstanceAs <| TopologicalSpace (m → n → α)` is *not* sufficient — the anchor must be the same instance term that appears in elaborated goal types, which is why this also adds `public import Mathlib.Topology.Instances.Matrix` (no cycle; that file only imports `LinearAlgebra.Matrix.*` and `Topology.Algebra.*`).
`norm`, `dist`, and the uniformity are untouched — only the packaging of the topology field changes, in the direction of the canonical instance. The fix works at Lean's default `maxSynthPendingDepth`. It also unblocks smul-continuity resolution in Fréchet-derivative developments over matrix codomains (`HasFDerivAt.const_smul` sites), where the goal's topology argument is the same non-reducing projection.
Motivation: hit in a downstream project (~4300 build jobs of matrix-valued Fréchet calculus) where ten files currently need local high-priority compat instances to work around this. A downstream repair cannot be shipped safely: boosting a repaired `SeminormedAddCommGroup`'s priority steals `‖·‖` resolution from files mixing norm scopes (e.g. `Matrix.Norms.L2Operator` sections of a Davis–Kahan development silently re-resolve to the elementwise norm). The fix has to live in the instance definitions.
Validation: full `lake build Mathlib` passes with the change (8666 jobs), plus new regression tests in `MathlibTest/MatrixNormTopology.lean` (both `rfl` agreements, the `Norm` synthesis above, `‖f‖` usage, `ContinuousConstSMul` unification).
Open questions for reviewers:
- Should the `linftyOp*` family get the same anchor for uniformity of design?
- Is `letI I := fast_instance% …; { I with … }` the preferred spelling here?
- Is the added import acceptable, or should the anchored instances move to a file that already sees `Topology.Instances.Matrix`?
Disclosure: this PR was prepared with AI assistance (Claude); the diagnosis and fix were validated by the full mathlib build and the included regression tests.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
|
t-analysis
new-contributor
|
60/4 |
Mathlib/Analysis/Matrix/Normed.lean,MathlibTest/MatrixNormTopology.lean |
2 |
2 |
['github-actions'] |
nobody |
4-84885 4 days ago |
4-85569 4 days ago |
4-85449 4 days |
| 41978 |
rosborn author:rosborn |
feat(SetTheory/Cardinal): strong induction on Nat.card for finite types |
Add the `Finite` analogue for `induction_subsingleton_or_nontrivial`.
---
This version uses a bare motive `Type* → Prop` since `Finite` carries no data. This allows it to be used directly with the induction tactic. I've found I've needed this when working with finite groups. It also cleans up the current `IsPGroup.isNilpotent` proof.
|
t-set-theory |
27/17 |
Mathlib/GroupTheory/Nilpotent.lean,Mathlib/SetTheory/Cardinal/NatCard.lean |
2 |
1 |
['github-actions'] |
nobody |
4-83645 4 days ago |
5-20863 5 days ago |
5-20743 5 days |
| 41088 |
Brian-Nugent author:Brian-Nugent |
feat(Topology): sheafRestrict is a right adjoint |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
maintainer-merge
|
5/0 |
Mathlib/Topology/Sheaves/Over.lean |
1 |
3 |
['Brian-Nugent', 'github-actions', 'j-loreaux'] |
j-loreaux assignee:j-loreaux |
4-76070 4 days ago |
30-6979 30 days ago |
30-6859 30 days |
| 36507 |
BryceT233 author:BryceT233 |
feat(RingTheory/MvPowerSeries): various equivalences for `MvPowerSeries` |
This PR adds a number of equivalences related to power series rings and is patterned after `Mathlib/Algebra/MvPolynomial/Equiv.lean`.
To be specific, it adds:
* `MvPowerSeries.isEmptyEquiv` : The isomorphism between multivariable power series
in no variables and the ground ring.
* `MvPowerSeries.uniqueEquiv` : The isomorphism between multivariable power series
in a single variable and power series over the ground ring.
* `MvPowerSeries.mapEquiv`, `MvPowerSeries.mapAlgEquiv` : The isomorhism between
multivariable power series induced by an isomorphism between the coefficient rings.
* `MvPowerSeries.sumAlgEquiv` : The isomorphism between multivariable power series
in a sum of two types, and multivariable power series in one of the types,
with coefficients in multivariable power series in the other type.
* `MvPowerSeries.commAlgEquiv` : The isomorphism between multivariable power series
in variables `σ` of multivariable power series in variables `τ` and multivariable power series
in variables `τ` of multivariable power series in variables `σ`.
* `MvPowerSeries.optionEquivLeft` : The isomorphism between multivariable power series
in `Option σ` and power series with coefficients in `MvPowerSeries σ R`.
* `MvPowerSeries.optionEquivRight` : The isomorphism between multivariable power series
in `Option σ` and multivariable power series in `σ` with coefficients in `PowerSeries R`
* `MvPowerSeries.finSuccEquiv` : The isomorphism between multivariable power series
in `Fin (n + 1)` and power series over multivariable power series in `Fin n`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
- [x] depends on: #35329
- [x] depends on: #36506
- [ ] depends on: #40205 |
t-ring-theory |
405/11 |
Mathlib/RingTheory/MvPowerSeries/Basic.lean,Mathlib/RingTheory/MvPowerSeries/Equiv.lean |
2 |
27 |
['AntoineChambert-Loir', 'BryceT233', 'Thmoas-Guan', 'WenrongZou', 'YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
mattrobball assignee:mattrobball |
4-72247 4 days ago |
4-72879 4 days ago |
62-19533 62 days |
| 41759 |
JovanGerb author:JovanGerb |
chore: deprecate `haveI'` and `letI'` |
It seems that the uses of `haveI'` can simply be replaced by `have`. If this doesn't cause performance regressions, then I think that this is desired.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
139/138 |
Mathlib/Algebra/Order/Field/Power.lean,Mathlib/NumberTheory/LucasLehmer.lean,Mathlib/Tactic/HaveI.lean,Mathlib/Tactic/ModCases.lean,Mathlib/Tactic/NormNum/Basic.lean,Mathlib/Tactic/NormNum/BigOperators.lean,Mathlib/Tactic/NormNum/DivMod.lean,Mathlib/Tactic/NormNum/Eq.lean,Mathlib/Tactic/NormNum/GCD.lean,Mathlib/Tactic/NormNum/Ineq.lean,Mathlib/Tactic/NormNum/Inv.lean,Mathlib/Tactic/NormNum/LegendreSymbol.lean,Mathlib/Tactic/NormNum/OfScientific.lean,Mathlib/Tactic/NormNum/Ordinal.lean,Mathlib/Tactic/NormNum/Pow.lean,Mathlib/Tactic/NormNum/Prime.lean,Mathlib/Tactic/Positivity/Basic.lean,Mathlib/Tactic/Positivity/Core.lean,Mathlib/Tactic/ReduceModChar.lean |
19 |
10 |
['JovanGerb', 'eric-wieser', 'github-actions', 'leanprover-radar', 'thorimur'] |
nobody |
4-72058 4 days ago |
11-66090 11 days ago |
11-67796 11 days |
| 41486 |
TTony2019 author:TTony2019 |
feat(Analysis/Convex/Intrinsic): add open segment intrinsic interior results |
Add open segment intrinsic interior results: `x ∈ intrinsicInterior 𝕜 C` and `y ∈ intrinsicClosure 𝕜 C`, then the open segment
from `x` to `y` stays in `intrinsicInterior 𝕜 C`.
Co-authored-by: Zichen Wang <imathwy@users.noreply.github.com> |
t-topology
new-contributor
t-analysis
|
68/0 |
Mathlib/Analysis/Convex/Intrinsic.lean,Mathlib/Analysis/Convex/Topology.lean,Mathlib/Topology/Algebra/Module/Basic.lean,Mathlib/Topology/Homeomorph/Defs.lean |
4 |
5 |
['TTony2019', 'github-actions', 'j-loreaux'] |
urkud assignee:urkud |
4-70516 4 days ago |
18-35530 18 days ago |
18-35410 18 days |
| 39763 |
NoahW314 author:NoahW314 |
feat(Algebra/GroupWithZero/Divisibility): add `mul_dvd_left_iff_isUnit` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
9/0 |
Mathlib/Algebra/GroupWithZero/Divisibility.lean |
1 |
1 |
['github-actions'] |
joelriou assignee:joelriou |
4-67148 4 days ago |
63-56026 63 days ago |
63-55906 63 days |
| 41324 |
luigi-massacci author:luigi-massacci |
feat: multiplication by a regular function in D^n_{K} as CLM (bilinear form version) |
Preliminary lemma for multiplication of a classical distribution by a regular function. The proof is essentially the same as that for `TemperedDistribution`, modulo details.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
107/11 |
Mathlib/Analysis/Distribution/ContDiffMapSupportedIn.lean |
1 |
9 |
['github-actions', 'luigi-massacci', 'mcdoll'] |
j-loreaux assignee:j-loreaux |
4-67146 4 days ago |
18-34397 18 days ago |
23-22008 23 days |
| 41348 |
mkaratarakis author:mkaratarakis |
feat(Tactic/ComputablePolynomial): define MvDegrees, exponent vectors for multivariate polynomials |
`MvDegrees nvars` is an exponent vector for a monomial in `nvars` variables: an array of per-variable exponents with its cached total degree, with pointwise addition (`AddCommMonoid`) and the `List`/`Array` folding lemmas the computable multivariate polynomial library (`MvSparsePoly`) is built on.
This is part 1 of the multivariate series splitting #41283 into ≤300-line PRs as requested by reviewers. The series builds up to `MvSparsePoly`, its `CommRing`/`Algebra` instances, and the axiom-free tactics `mv_decide` (ring identities of `MvPolynomial`) and `mv_mem` (ideal membership).
Based on the univariate `SparsePoly` (#41339); started by Mario Carneiro at the Hausdorff Institute (June 2024) with design notes and an original Lean prototype by James Davenport (https://github.com/JamesHDavenport/Dagstuhl23401, `verify-irred/VerifyIrred`).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
|
t-meta |
301/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/ComputablePolynomial/MvDegrees.lean |
3 |
2 |
['github-actions'] |
thorimur assignee:thorimur |
4-67145 4 days ago |
22-42236 22 days ago |
22-42335 22 days |
| 41477 |
lucifer1004 author:lucifer1004 |
feat(Analysis/InnerProductSpace): add Hilbert-Schmidt inner product and norm |
This PR adds the Hilbert-Schmidt (Frobenius) inner product and norm on linear maps `E →ₗ[𝕜] F` between finite-dimensional inner product spaces over an `RCLike` field, built through `InnerProductSpace.Core`. The instances are scoped under `LinearMap.Norms.HilbertSchmidt` (rather than global, since `E →ₗ[𝕜] F` should not carry a canonical norm), mirroring the `Matrix.Norms.Frobenius` convention.
Main declarations:
- `LinearMap.hilbertSchmidtCore`
- `LinearMap.hilbertSchmidtNormedAddCommGroup`
- `LinearMap.hilbertSchmidtInnerProductSpace`
- `LinearMap.trace_adjoint_comp_eq_sum_inner`
- `LinearMap.hilbertSchmidt_inner_eq_trace`
- `LinearMap.hilbertSchmidt_norm_sq_eq_re_trace`
- `LinearMap.hilbertSchmidt_norm_sq_eq_sum_norm_sq`
This is the foundation for a sequence of PRs proving the Eckart-Young-Mirsky best low-rank approximation theorems on top of `LinearMap.singularValues`; see the notes below the fold.
Verification:
- Builds
- `runLinter` passes
- `lint-style` clean
- No `sorry`
AI use disclosure: this PR was developed with the assistance of Claude (via Claude Code), which was used to draft and refactor the Lean proofs under my direction. I have reviewed the final code, can justify the design decisions, and take responsibility for it.
---
Following review feedback on Zulip, the original four-file PR has been split; this PR now contains only the Hilbert-Schmidt norm, and the proofs across all four files have been refactored to be more compact. The follow-ups are:
- Ky Fan inequality + Eckart-Young in Frobenius norm (branch `eckart-young-frobenius`, depends on this PR);
- the operator norm equals the largest singular value (branch `opnorm-singular-values`, independent);
- Eckart-Young in operator norm (branch `eckart-young-spectral`, independent).
I would especially appreciate feedback on whether the scoped `LinearMap.Norms.HilbertSchmidt` instance is the right API here, or whether a type-synonym approach (à la `WithLp`) would be preferred.
|
t-analysis
new-contributor
LLM-generated
|
120/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/HilbertSchmidt.lean |
2 |
3 |
['github-actions', 'ocfnash'] |
j-loreaux assignee:j-loreaux |
4-67144 4 days ago |
18-56153 18 days ago |
18-56033 18 days |
| 41940 |
mcdoll author:mcdoll |
chore(Dynamics): deprecate `IsForwardInvariant` in favour of new `Set.IsInvariantOn` |
We define a predicate `Set.IsInvariantOn` that generalizes `IsInvariant` and as a special case contains `IsForwardInvariant`. The later is hence removed. We also move `IsInvariant` into the `Set` namespace to allow for dot-notation.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-dynamics |
52/17 |
Mathlib/Dynamics/Flow.lean,Mathlib/Dynamics/OmegaLimit.lean |
2 |
1 |
['github-actions'] |
ADedecker assignee:ADedecker |
4-67143 4 days ago |
6-56594 6 days ago |
6-66368 6 days |
| 41988 |
vlad902 author:vlad902 |
feat(FreeGroup): characterize commutative/cyclic free groups |
Characterize cyclic/commutative free groups as being those on ≤ 1 generators. I generalize and move around some instances along the way to avoid new imports.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
64/23 |
Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/FieldTheory/Galois/Basic.lean,Mathlib/GroupTheory/FreeGroup/Basic.lean,Mathlib/GroupTheory/FreeGroup/Reduce.lean,Mathlib/GroupTheory/SpecificGroups/Cyclic/Basic.lean,Mathlib/Logic/Unique.lean |
7 |
3 |
['github-actions', 'vlad902'] |
nobody |
4-41817 4 days ago |
4-45407 4 days ago |
4-45442 4 days |
| 42000 |
kebekus author:kebekus |
feat: trivial estimates for the positive part of the logarithm |
Complete API for posLog by adding several trivial but useful estimates.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
large-import
|
51/0 |
Mathlib/Analysis/SpecialFunctions/Log/PosLog.lean |
1 |
1 |
['github-actions'] |
nobody |
4-39329 4 days ago |
4-40107 4 days ago |
4-39987 4 days |
| 42002 |
philipp-svinger author:philipp-svinger |
feat(Analysis/ODE): add Peano existence theorem |
Add the proof of the Peano existence theorem for ODEs, using Tonelli approximations.
Implement the structure IsPeano similar to IsPicardLindelof. Construct a sequence of approximations using Tonelli technique. Prove existence of a limit by Arzela-Ascoli.
Conclude by proving it solves the initial value problem.
Co-authored-by: Florian Grube <fgrube@math.uni-bielefeld.de>
Co-authored-by: Paul Niessner <pniessner@math.uni-bielefeld.de>
Co-authored-by: Julian Rolfes <jrolfes@math.uni-bielefeld.de>
Co-authored-by: Luke Schleef <lschleef@math.uni-bielefeld.de>
Co-authored-by: Philipp Svinger <psvinger@math.uni-bielefeld.de>
---
For formalizing the main theorem, we followed the existing lean code for the Picard-Lindelof ODE theorem.
AI was used to help us to adapt our code the style and naming conventions. We also used it in the process of writing a documentation.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
new-contributor
|
671/0 |
Mathlib.lean,Mathlib/Analysis/ODE/Peano.lean |
2 |
2 |
['github-actions'] |
nobody |
4-31147 4 days ago |
4-31704 4 days ago |
4-31584 4 days |
| 40995 |
WilliamCoram author:WilliamCoram |
feat: epsilon dense implies dense |
We follow BGR - Nonarchimedean analysis and introduce the definition of a subgroup being epsilon dense. Then prove this implies dense (Prop 1.1.4./2)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
24/0 |
Mathlib/Topology/MetricSpace/HausdorffDistance.lean |
1 |
13 |
['WilliamCoram', 'github-actions', 'j-loreaux'] |
j-loreaux assignee:j-loreaux |
4-22537 4 days ago |
4-24064 4 days ago |
31-40922 31 days |
| 41910 |
wwylele author:wwylele |
feat(Analysis/Normed/Affine): mapping dist with homothety |
---
The file has all sorts of lemma involving `dist` and `homothety`, but the one that applies homothety on both points is surprisingly missing.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
14/0 |
Mathlib/Analysis/Normed/Affine/AddTorsor.lean |
1 |
1 |
['github-actions'] |
nobody |
4-20339 4 days ago |
7-64413 7 days ago |
7-64293 7 days |
| 41956 |
mckoen author:mckoen |
feat(CategoryTheory/Quotient): the quotient category is monoidal |
If `r : HomRel C` is a congruence on a (braided, symmetric) monoidal (resp. preadditive, linear) category `C` which satisfies certain compatibilities with left and right whiskering (resp. addition/scalar multiplication), then `Quotient r` is also (braided, symmetric) monoidal (resp. preadditive, linear).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
353/0 |
Mathlib.lean,Mathlib/CategoryTheory/Monoidal/Preadditive.lean,Mathlib/CategoryTheory/Quotient/Monoidal.lean |
3 |
2 |
['github-actions', 'joelriou'] |
nobody |
4-19064 4 days ago |
4-19700 4 days ago |
4-33158 4 days |
| 42006 |
ybenmeur author:ybenmeur |
chore(FGModuleCat/EssentiallySmall): generalize to `Ring` |
Replace the `CommRing` instance with `Ring`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
easy
new-contributor
label:t-algebra$ |
1/1 |
Mathlib/Algebra/Category/FGModuleCat/EssentiallySmall.lean |
1 |
2 |
['github-actions'] |
nobody |
4-15663 4 days ago |
4-16695 4 days ago |
4-16575 4 days |
| 41996 |
vlad902 author:vlad902 |
fix(CategoryTheory/Monoidal/Cartesian/Over): add more adaptation notes |
These lemmas all have their `_assoc` generated lemma type signatures change if the associated `set_option` is deleted. Add an `#adaptation_note` so these are not automatically deleted by `rm_set_option.py`.
This is a follow-up to #41837 and [this Zulip thread](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/4.2E33.2E0-rc1.20Multiple.20.60respectTransparency.60-related.20issues/near/611153200).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
30/0 |
Mathlib/CategoryTheory/Monoidal/Cartesian/Over.lean |
1 |
1 |
['github-actions'] |
nobody |
4-15152 4 days ago |
4-49468 4 days ago |
4-49348 4 days |
| 39574 |
FordUniver author:FordUniver |
feat(Analysis/Calculus/LipschitzSmooth): add `LipschitzSmoothWith` and `CocoerciveWith` |
Introduces `LipschitzSmoothWith K f` on a normed real vector space and `CocoerciveWith K f` on a Hilbert space. `LipschitzSmoothWith` is opaque with characterisations in four derivative-flavoured forms (directional, Fréchet, 1D, gradient) under appropriate differentiability hypotheses, plus descent-inequality extractors and variance bounds; `CocoerciveWith` is an `abbrev` with the elementary direction `K`-cocoercive ⟹ `K`-Lipschitz gradient.
Co-authored-by: Sebastian Pokutta <23001135+pokutta@users.noreply.github.com>
---
The `lineDeriv` form is the internal canonical form because it does not presuppose Fréchet differentiability; the `@[expose]` annotation is deliberately omitted so that downstream code reaches the predicate through the named iff/extractor API rather than direct destruction, treating the choice as an implementation detail. The `K / 2` convention is chosen so that the descent lemma is constant-preserving: a function with `K`-Lipschitz Fréchet derivative is exactly `K`-smooth in this sense.
This PR is intentionally minimal and contains only the definition and some basic `rw` and `apply` lemmas. I have some follow up PRs planned (not fully polished yet) that establish the usual implications plus pre-requisites:
1. **Descent lemma.** Derives `LipschitzSmoothWith K f` from `LipschitzWith K (fderiv ℝ f)` (and its 1D / gradient variants) under `Differentiable ℝ f`, via segment-level FTC. [diff](https://github.com/FordUniver/mathlib4/compare/diffbase/lipschitzSmooth-descent...feat/lipschitzSmooth-descent)
2. **First-order convex inequalities.** Adds `ConvexOn.add_{lineDeriv,fderiv,gradient,deriv}_le` (and strict variants + concave duals) — the tangent-line-lower-bound characterisations of `ConvexOn`. [diff](https://github.com/FordUniver/mathlib4/compare/diffbase/convex-first-order-inequalities...feat/convex-first-order-inequalities)
3. **Baillon-Haddad theorem and convex equivalences.** Under `ConvexOn ℝ Set.univ f` + `Differentiable ℝ f`, `LipschitzSmoothWith K f → CocoerciveWith K f`, closing the four-way equivalence with `LipschitzWith K (fderiv ℝ f)` and `LipschitzWith K (∇ f)`. [diff](https://github.com/FordUniver/mathlib4/compare/diffbase/lipschitzSmooth-convex...feat/lipschitzSmooth-convex)
4. **Continuity and the `K = 0` boundary case.** A continuity statement `LipschitzSmoothWith K f → Continuous f` (non-trivial in the general non-differentiable case), and the characterisation `LipschitzSmoothWith 0 f ↔ ConcaveOn ℝ Set.univ f` under differentiability.
5. **Algebraic preservation lemmas.** `LipschitzSmoothWith` closed under `+` (with `K₁ + K₂`), `c •` for `c ≥ 0` (with `c · K`), composition with affine maps (with `‖A.linear‖² · K`). [diff](https://github.com/FordUniver/mathlib4/compare/feat/lipschitzSmooth-basic...feat/lipschitzSmooth-algebra)
Beyond those, larger-picture generalisations remain open: a set-restricted version `LipschitzSmoothOnWith K f s` (with `s` a convex subset, parallel to the standard pattern for `ConvexOn`, `LipschitzOn`, etc.), and possibly broadening the base field / target away from `ℝ` (e.g. complex Hilbert spaces; vector-valued targets would require a different right-hand side and likely a separate predicate).
The only unmerged upstream dependency is #39203, needed for the gradient-form characterisations. The base definition and the directional / Fréchet / 1D characterisations are independent of any unmerged work.
- [x] depends on: #39203
- [x] depends on: #14502
Diff for the changes *just* in this PR over its predecessor: [link](https://github.com/FordUniver/mathlib4/compare/refactor/gradient-ungate-inner-lemmas...feat/lipschitzSmooth-basic) |
t-analysis |
418/0 |
Mathlib.lean,Mathlib/Analysis/Calculus/LipschitzSmooth/Basic.lean,Mathlib/Analysis/Calculus/LipschitzSmooth/Deriv.lean,Mathlib/Analysis/Calculus/LipschitzSmooth/FDeriv.lean,Mathlib/Analysis/Calculus/LipschitzSmooth/Gradient.lean |
5 |
27 |
['FordUniver', 'Komyyy', 'github-actions', 'j-loreaux', 'mathlib-dependent-issues', 'mathlib-splicebot'] |
j-loreaux assignee:j-loreaux |
4-14293 4 days ago |
4-17054 4 days ago |
35-68120 35 days |
| 41731 |
mpacholski author:mpacholski |
feat(Topology/Algebra/Module/Spaces/ContinuousLinearMap): convert `toLinearMap₁₂` to a linear map |
Convert the projection `toLinearMap₁₂` (which strips the topology from a continuous semibilinear map) to a linear map, by showing that it preserves addition and scalar multiplication. We also rename `toLinearMap₁₂_apply` to `toLinearMap₁₂_apply_apply_apply` without deprecation so that we can have `_apply` be a different lemma.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
tech debt
maintainer-merge
|
11/9 |
Mathlib/Analysis/Fourier/FourierTransformDeriv.lean,Mathlib/MeasureTheory/Measure/CharacteristicFunction/TaylorExpansion.lean,Mathlib/Topology/Algebra/Module/Spaces/ContinuousLinearMap.lean |
3 |
24 |
['github-actions', 'mpacholski', 'pechersky', 'themathqueen'] |
nobody |
4-13380 4 days ago |
7-85833 7 days ago |
9-43227 9 days |
| 37666 |
TJHeeringa author:TJHeeringa |
feat(Analysis/InnerProductSpace/Reproducing): Lipschitz wrt the kernel pseudometric |
RKHSs $H$ have bounded point evaluations. This induces a pseudometric on the underlying space `X`. The function $f\in H$ are Lipschitz continuous with Lipschitz constant $\||f\||$. This adds the theorem `lipschitzWith_ennnorm` encoding this.
---
This PR uses the name `lipschitzWith`, but doesn't actually proof a statment like `LipschitzWith ‖f‖₊ f` where Lipschitzianity is defined with respect to a pseudometric. We could create an instance for the pseudometric. That would give the code below. However, there the `(ofKMD 𝕜 V H)` in the `LipschitzWith ‖f‖₊ (f ∘ (ofKMD 𝕜 V H))` is undesirable. If we pursue the route with this pseudometric instance, then I would need some help, because I don't know how to get around it.
```lean4
section Lipschitz
variable (𝕜 X V) in
/-- Type copy of domain `X` meant for being equipped with the kernel metric, abbreviated `KMD`. -/
@[nolint unusedArguments]
def KernelMetricDomain [RKHS 𝕜 H X V] : Type _ := X
variable (𝕜 V) in
/-- `toKMD` is the identity function to the `KernelMetricDomain 𝕜 X V H` of a `X`. -/
def toKMD : X ≃ KernelMetricDomain 𝕜 X V H := Equiv.refl _
variable (𝕜 V) in
/-- `ofKMD` is the identity function from the `KernelMetricDomain 𝕜 X V H` to `X`. -/
def ofKMD : KernelMetricDomain 𝕜 X V H ≃ X := Equiv.refl _
omit [CompleteSpace H] [CompleteSpace V] in
@[simp] theorem toKMD_symm_eq : (toKMD 𝕜 V H).symm = ofKMD 𝕜 V H := by rfl
omit [CompleteSpace H] [CompleteSpace V] in
@[simp] theorem ofKMD_symm_eq : (ofKMD 𝕜 V H).symm = toKMD 𝕜 V H := by rfl
omit [CompleteSpace H] [CompleteSpace V] in
@[simp] theorem ofKMD_toKMD (x : X) : ofKMD 𝕜 V H (toKMD 𝕜 V H x) = x := by rfl
omit [CompleteSpace H] [CompleteSpace V] in
@[simp]
theorem toKMD_ofKMD (x : KernelMetricDomain 𝕜 X V H) :
toKMD 𝕜 V H (ofKMD 𝕜 V H x) = x := by
rfl
variable (𝕜 X V) in
instance instKMDPseudoEMetricSpace [RKHS 𝕜 H X V] :
PseudoEMetricSpace (KernelMetricDomain 𝕜 X V H) :=
PseudoEMetricSpace.induced ((kerFun H) ∘ ofKMD 𝕜 V H) inferInstance
@[simp]
lemma edist_KMD (x y : KernelMetricDomain 𝕜 X V H) :
edist x y = edist (kerFun H (ofKMD 𝕜 V H x)) (kerFun H (ofKMD 𝕜 V H y)) :=
rfl
variable {H} in
theorem lipschitzWith_ennnorm' (f : H) (x y : X) :
edist (f x) (f y) ≤ ‖f‖₊ * edist (kerFun H x) (kerFun H y) := by
by_cases h : f = 0
· simp [h]
simp_rw [edist_eq_enorm_sub, ← eval_apply, ← sub_apply]
grw [le_opENorm]
rw [← enorm_eq_nnnorm, mul_comm, ENNReal.mul_le_mul_iff_right (enorm_ne_zero.mpr h) enorm_ne_top]
simp_rw [kerFun_eq_adjoint_eval, ← LinearIsometryEquiv.map_sub, enorm_le_iff_norm_le,
LinearIsometryEquiv.norm_map, le_refl]
variable {H} in
theorem lipschitzWith_ennnorm (f : H) :
LipschitzWith ‖f‖₊ (f ∘ (ofKMD 𝕜 V H)) :=
fun x y => by simpa [edist_KMD] using lipschitzWith_ennnorm' f (ofKMD 𝕜 V H x) (ofKMD 𝕜 V H y)
end Lipschitz
```
#### AI:
I had the instance outside the theorem. Lean gave problems with resolving type classes / instance synthesis. I asked Claude and ChatGPT to interpret the error and fix it. The latter just spit gibberish and the former suggested inlining but in a way that didn't work. Then, I asked on Zulip and got the same suggestion but working. The type synonym alternative was also suggested there. The final PR doesn't include the instance because of the aforementioned reasons.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
new-contributor
|
26/6 |
Mathlib/Analysis/InnerProductSpace/Reproducing.lean |
1 |
10 |
['TJHeeringa', 'github-actions', 'j-loreaux', 'jkandel1'] |
nobody |
4-13352 4 days ago |
4-14000 4 days ago |
11-29929 11 days |
| 35078 |
grunweg author:grunweg |
feat: immersed points |
Define immersed points of a (differentiable) map between manifolds, and prove that immersed points compose.
Future PRs show that `x` is an immersed point of `f` if and only if `f` is an immersion at `x`:
thus, proving the composition of immersed points (which follows immediately from the chain rule)
implies the composition of immersions (which is not obvious from their definition.
From the path towards immersions, embeddings and submanifolds.
---
- [x] depends on: #35057
- [x] depends on: #35284
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
187/1 |
Mathlib.lean,Mathlib/Analysis/Normed/Module/ContinuousInverse.lean,Mathlib/Geometry/Manifold/ImmersedPoint.lean,Mathlib/Geometry/Manifold/LocalDiffeomorph.lean |
4 |
5 |
['github-actions', 'grunweg', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
4-12216 4 days ago |
10-84801 10 days ago |
10-84687 10 days |
| 40019 |
grunweg author:grunweg |
chore: golf using fun_prop |
Partially enabled through #35683.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
15/31 |
Counterexamples/TopologistsSineCurve.lean,Mathlib/Analysis/Convex/Contractible.lean,Mathlib/Condensed/Discrete/LocallyConstant.lean,Mathlib/Condensed/Light/Sequence.lean,Mathlib/MeasureTheory/Constructions/Polish/Basic.lean,Mathlib/MeasureTheory/Function/SpecialFunctions/Basic.lean |
6 |
1 |
['github-actions'] |
nobody |
4-10286 4 days ago |
4-12445 4 days ago |
26-78315 26 days |
| 41101 |
YaelDillies author:YaelDillies |
feat(Data/{ENat,ENNReal,EReal}): missing coercion lemmas |
From MeanFourier
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
30/0 |
Mathlib/Data/ENat/Basic.lean,Mathlib/Data/EReal/Basic.lean,Mathlib/Data/Real/ENatENNReal.lean |
3 |
9 |
['YaelDillies', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
4-10192 4 days ago |
4-12838 4 days ago |
25-196 25 days |
| 41289 |
D-Thomine author:D-Thomine |
feat(Dynamics): recurrents set and refactoring of conservative maps |
This PR deals mostly with `Dynamics.Conservative`. The notion of *recurrent set* is introduced: a set `s` is recurrent if almost every point in `s` returns to `s`. Most properties of conservative maps actually apply to recurrent sets.
The definition of conservative map is changed to align with this notion of recurrent set (a map is conservative if every measurable set is recurrent). Theorem `MeasureTheory.conservative_iff_exists_mem_iterate_mem` expresses the equivalence of the new definition with the older one.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-dynamics |
343/114 |
Mathlib/Dynamics/Ergodic/Conservative.lean,Mathlib/Dynamics/Ergodic/MeasurePreserving.lean,Mathlib/MeasureTheory/Measure/QuasiMeasurePreserving.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/CountableInter.lean,Mathlib/Order/Interval/Finset/Basic.lean |
6 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
ADedecker assignee:ADedecker |
4-6034 4 days ago |
4-8991 4 days ago |
13-73127 13 days |
| 41666 |
alreadydone author:alreadydone |
feat(Order): constructors for DistribLattice and IsModularLattice |
Add three constructors for DistribLattice and one for IsModularLattice.
Co-authored-by: Aaron Liu @plp127
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
142/54 |
Mathlib.lean,Mathlib/Order/Lattice.lean,Mathlib/Order/Lattice/Constructor.lean,Mathlib/Order/ModularLattice.lean |
4 |
12 |
['SnirBroshi', 'alreadydone', 'github-actions', 'leanprover-radar', 'plp127'] |
nobody |
3-86141 3 days ago |
13-17818 13 days ago |
13-66034 13 days |
| 41933 |
felixpernegger author:felixpernegger |
chore: prefer `beta_reduce` over `(d)simp only` |
Insired by discussion at #38989.
This PR replaces `(d)simp only` (with no arguments) with the slightly cheaper `beta_reduce` whenever that works and doesnt change the goal. This also increases code readability a bit
More could be replaced if we allow the goal to be changed. Additonally, some of the `simp only` could be removed entirely (I dont think doing either one of those is good though).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
196/196 |
Mathlib/Algebra/Category/Grp/EpiMono.lean,Mathlib/Algebra/Category/ModuleCat/ChangeOfRings.lean,Mathlib/Algebra/DirectSum/Idempotents.lean,Mathlib/Algebra/DirectSum/Internal.lean,Mathlib/Algebra/GroupWithZero/WithZero.lean,Mathlib/Algebra/MonoidAlgebra/NoZeroDivisors.lean,Mathlib/Algebra/MvPolynomial/Derivation.lean,Mathlib/Algebra/Order/CauSeq/BigOperators.lean,Mathlib/Algebra/Order/Module/HahnEmbedding.lean,Mathlib/Algebra/Polynomial/Monic.lean,Mathlib/AlgebraicGeometry/IdealSheaf/Basic.lean,Mathlib/AlgebraicGeometry/Morphisms/AffineAnd.lean,Mathlib/AlgebraicGeometry/Morphisms/SurjectiveOnStalks.lean,Mathlib/Analysis/Asymptotics/TVS.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Continuity.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Order.lean,Mathlib/Analysis/CStarAlgebra/Unitary/Connected.lean,Mathlib/Analysis/CStarAlgebra/Unitization.lean,Mathlib/Analysis/Calculus/ContDiff/FaaDiBruno.lean,Mathlib/Analysis/Calculus/FDeriv/Analytic.lean,Mathlib/Analysis/Calculus/LHopital.lean,Mathlib/Analysis/Calculus/ParametricIntegral.lean,Mathlib/Analysis/Complex/ValueDistribution/Cartan.lean,Mathlib/Analysis/Convex/Gauge.lean,Mathlib/Analysis/Fourier/AddCircle.lean,Mathlib/Analysis/Fourier/AddCircleMulti.lean,Mathlib/Analysis/InnerProductSpace/Projection/FiniteDimensional.lean,Mathlib/Analysis/MellinTransform.lean,Mathlib/Analysis/Normed/Algebra/Exponential.lean,Mathlib/Analysis/Normed/Lp/lpSpace.lean,Mathlib/Analysis/Normed/Unbundled/SpectralNorm.lean,Mathlib/Analysis/SpecialFunctions/CompareExp.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Basic.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/GaussianIntegral.lean,Mathlib/Analysis/SpecialFunctions/ImproperIntegrals.lean,Mathlib/Analysis/SpecialFunctions/Integrability/Basic.lean,Mathlib/Analysis/SpecialFunctions/Log/Monotone.lean,Mathlib/Analysis/SpecialFunctions/Pow/Continuity.lean,Mathlib/Analysis/SpecialFunctions/Pow/Integral.lean,Mathlib/CategoryTheory/Bicategory/End.lean,Mathlib/CategoryTheory/Limits/Fubini.lean,Mathlib/Combinatorics/Hall/Basic.lean,Mathlib/Combinatorics/Hall/Finite.lean,Mathlib/Computability/PartrecCode.lean,Mathlib/Computability/RE.lean,Mathlib/Computability/TuringMachine/Config.lean,Mathlib/Computability/TuringMachine/ToPartrec.lean,Mathlib/Data/DFinsupp/Defs.lean,Mathlib/Data/ENat/Pow.lean,Mathlib/Data/EReal/Inv.lean,Mathlib/Data/List/NodupEquivFin.lean,Mathlib/Data/Nat/Factorization/Basic.lean,Mathlib/Data/Nat/Factorization/LCM.lean,Mathlib/Data/Setoid/Partition.lean,Mathlib/FieldTheory/CardinalEmb.lean,Mathlib/Geometry/Euclidean/Incenter.lean,Mathlib/Geometry/Euclidean/Triangle.lean,Mathlib/Geometry/Manifold/Riemannian/PathELength.lean,Mathlib/GroupTheory/CoprodI.lean,Mathlib/GroupTheory/Coxeter/Basic.lean,Mathlib/GroupTheory/Divisible.lean,Mathlib/GroupTheory/GroupAction/Basic.lean,Mathlib/GroupTheory/GroupAction/MultiplePrimitivity.lean,Mathlib/GroupTheory/GroupAction/Quotient.lean,Mathlib/GroupTheory/HNNExtension.lean,Mathlib/GroupTheory/Nilpotent.lean,Mathlib/GroupTheory/OrderOfElement.lean,Mathlib/GroupTheory/QuotientGroup/Defs.lean,Mathlib/GroupTheory/SpecificGroups/Cyclic/Basic.lean,Mathlib/GroupTheory/Sylow.lean,Mathlib/LinearAlgebra/AffineSpace/Independent.lean,Mathlib/LinearAlgebra/Lagrange.lean,Mathlib/LinearAlgebra/Matrix/Adjugate.lean,Mathlib/LinearAlgebra/Matrix/Determinant/Basic.lean,Mathlib/LinearAlgebra/Matrix/Rank.lean,Mathlib/LinearAlgebra/Matrix/SpecialLinearGroup.lean,Mathlib/LinearAlgebra/Matrix/ZPow.lean,Mathlib/LinearAlgebra/PiTensorProduct/Basic.lean,Mathlib/LinearAlgebra/RootSystem/Finite/Nondegenerate.lean,Mathlib/LinearAlgebra/RootSystem/OfBilinear.lean,Mathlib/LinearAlgebra/SpecialLinearGroup.lean,Mathlib/MeasureTheory/Constructions/BorelSpace/Real.lean,Mathlib/MeasureTheory/Function/AbsolutelyContinuous.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/CondexpL2.lean,Mathlib/MeasureTheory/Function/L2Space.lean,Mathlib/MeasureTheory/Function/LpSpace/Complete.lean,Mathlib/MeasureTheory/Function/LpSpace/Indicator.lean,Mathlib/MeasureTheory/Integral/Bochner/Basic.lean,Mathlib/MeasureTheory/Integral/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Integral/RieszMarkovKakutani/Basic.lean,Mathlib/MeasureTheory/Integral/SetToL1.lean,Mathlib/MeasureTheory/MeasurableSpace/Prod.lean,Mathlib/NumberTheory/Harmonic/ZetaAsymp.lean,Mathlib/NumberTheory/JacobiSum/Basic.lean,Mathlib/NumberTheory/MulChar/Basic.lean,Mathlib/NumberTheory/NumberField/CMField.lean,Mathlib/NumberTheory/RamificationInertia/HilbertTheory.lean,Mathlib/Order/Category/NonemptyFinLinOrd.lean,Mathlib/Order/CountableSupClosed.lean,Mathlib/Order/Filter/Finite.lean |
132 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
3-85511 3 days ago |
6-82177 6 days ago |
6-82095 6 days |
| 42012 |
grunweg author:grunweg |
feat: `isInvertible_mfderiv_extend` |
Prove that extended charts have invertible `mfderiv`, provided they lie in a maximal atlas.
This generalises `isInvertible_mfderiv_extChartAt` and its preliminary lemmas to any extended chart in the maximal atlas: this will be used in #41796 to prove that immersions have immersed points.
----------
- [x] depends on: https://github.com/leanprover-community/mathlib4/pull/42011
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
132/63 |
Mathlib/Geometry/Manifold/MFDeriv/Atlas.lean |
1 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
3-77548 3 days ago |
4-3566 4 days ago |
4-3775 4 days |
| 42017 |
plp127 author:plp127 |
chore(Algebra/MvPolynomial/Eval): deprecate duplicate definition |
Deprecate `MvPolynomial.eval₂AlgHom`, which is a duplicate of `MvPolynomial.aeval`. I chose to keep `MvPolynomial.aeval` over `MvPolynomial.eval₂AlgHom` because the corresponding definition for univariate polynomials is `Polynomial.aeval`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
26/24 |
Mathlib/Algebra/MvPolynomial/Eval.lean,Mathlib/RingTheory/DividedPowerAlgebra/Init.lean |
2 |
1 |
['github-actions'] |
nobody |
3-74616 3 days ago |
3-76172 3 days ago |
3-77002 3 days |
| 41694 |
tb65536 author:tb65536 |
feat: finrank is preserved by `IsFractionRing` |
This PR gives a direct proof of `Algebra.IsAlgebraic.finrank_of_isFractionRing` which avoids any additional assumptions beyond those required for the statement (including `Algebra.IsAlgebraic`).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41682
- [x] depends on: #41683
- [x] depends on: #41688
- [x] depends on: #41691
- [x] depends on: #41698
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
label:t-algebra$ |
52/7 |
Mathlib/FieldTheory/Galois/IsGaloisGroup.lean,Mathlib/LinearAlgebra/Dimension/Localization.lean,Mathlib/RingTheory/Algebraic/Integral.lean |
3 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
nobody |
3-73906 3 days ago |
3-73953 3 days ago |
3-73834 3 days |
| 38002 |
Raph-DG author:Raph-DG |
feat(Topology): Relating irreducible components of a space to codimension one points in non dense subsets |
In this PR we show that the coheight zero points of a sober space (in the specialization order) correspond to the irreducible components. Furthermore, we show that the coheight one points of any non dense subset p of X (in the specialization order on X) have coheight zero in the specialization order on p.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import
t-topology
|
112/0 |
Mathlib/Order/Hom/Basic.lean,Mathlib/Order/KrullDimension.lean,Mathlib/Order/Minimal.lean,Mathlib/Topology/Inseparable.lean,Mathlib/Topology/KrullDimension.lean,Mathlib/Topology/Sober.lean |
6 |
7 |
['ADedecker', 'Raph-DG', 'dagurtomas', 'github-actions', 'mathlib-merge-conflicts'] |
fpvandoorn assignee:fpvandoorn |
3-67150 3 days ago |
31-10655 31 days ago |
99-7430 99 days |
| 41460 |
SnirBroshi author:SnirBroshi |
feat(SimpleGraph/Walk/Operations): more operations API |
---
Moved `support_tail_of_not_nil` up because `reverse_dropLast` uses it as a `simp` lemma.
Tagged it with `simp` makes `cons_support_tail` work `by simp`, so I also untagged `cons_support_tail`.
You may wonder whether we need `mapLe` API if it's an `abbrev` for `map`; the answer is you can't `rw`/`simp` goals with `mapLe` using `map` API because these tactics do not unfold the `Hom.ofLE` (and then `id`) applications in the endpoints of the walk, since it isn't reducible (even though `mapLe` itself is). The definition of `mapLe` is actually an `abbrev` plus a non-reducibly defeq type change.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
tech debt
|
86/15 |
Mathlib/Combinatorics/SimpleGraph/Walk/Decomp.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Maps.lean,Mathlib/Combinatorics/SimpleGraph/Walk/Operations.lean |
3 |
5 |
['SnirBroshi', 'github-actions', 'vlad902'] |
JovanGerb assignee:JovanGerb |
3-67148 3 days ago |
18-64036 18 days ago |
18-65793 18 days |
| 30637 |
strihanje01 author:strihanje01 |
feat(Combinatorics/SetFamily/Lindstrom): Lindstrom's theorem for subfamilies with equal unions |
add Lindstrom's theorem and its strengthening for equal intersections
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include at least one commit authored by each
co-author among the commits in the pull request. If necessary, you may
create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
When merging, all the commits will be squashed into a single commit listing all co-authors.
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
|
211/0 |
Mathlib.lean,Mathlib/Combinatorics/SetFamily/Lindstrom.lean |
2 |
2 |
['github-actions', 'mathlib4-merge-conflict-bot'] |
nobody |
3-66248 3 days ago |
25-33312 25 days ago |
56-82688 56 days |
| 36146 |
Multramate author:Multramate |
feat(AlgebraicGeometry/GammaSpecAdjunction): add equivalences for Spec morphisms that commute with algebra maps |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
t-algebra
label:t-algebra$ |
47/2 |
Mathlib/Algebra/Category/CommAlgCat/Basic.lean,Mathlib/AlgebraicGeometry/GammaSpecAdjunction.lean,Mathlib/AlgebraicGeometry/Scheme.lean |
3 |
18 |
['CBirkbeck', 'Multramate', 'chrisflav', 'erdOne', 'github-actions'] |
nobody |
3-66247 3 days ago |
25-34373 25 days ago |
37-80504 37 days |
| 40998 |
kbuzzard author:kbuzzard |
chore: remove tangent space backward respect transparency |
Is this the sort of thing we should be doing?
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
2/3 |
Mathlib/Geometry/Manifold/IsManifold/Basic.lean |
1 |
2 |
['Parcly-Taxel', 'github-actions'] |
nobody |
3-65538 3 days ago |
32-25576 32 days ago |
32-25456 32 days |
| 42015 |
plp127 author:plp127 |
chore(GroupTheory/FreeGroup): fix recursor argument name |
Fix the argument names to `FreeGroup.induction_on` and `FreeAddGroup.induction_on`. Name the motive `motive` and name the minor premises according to their contents.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
6/6 |
Mathlib/GroupTheory/FreeGroup/Basic.lean |
1 |
1 |
['felixpernegger', 'github-actions'] |
nobody |
3-62944 3 days ago |
3-84554 3 days ago |
3-84434 3 days |
| 41957 |
YijunYuan author:YijunYuan |
feat(NumberTheory/Padics/Complex): add densely normed field and separable space instances |
Equip the field `ℂ_[p]` of `p`-adic complex numbers and its dense subfield
`PadicAlgCl p` (the algebraic closure of `ℚ_[p]`) with two further standard
typeclass instances.
Main additions:
* `DenselyNormedField (PadicAlgCl p)`: the norm takes values dense in the
positive reals. The witness between two given bounds `a < b` is built from an
`n`-th root `z` of `p` (which exists since `PadicAlgCl p` is algebraically
closed): choosing `n` so that `(a / b) ^ n < ‖p‖` gives `a / b < ‖z‖ < 1`, and
some integer power `z ^ m` then has norm strictly between `a` and `b`.
* `SeparableSpace (PadicAlgCl p)`: the elements algebraic over `ℚ` form a
countable dense subset. Density follows from continuity of roots — `α` is a
root of its minimal polynomial `f` over `ℚ_[p]`, and approximating the
coefficients of `f` by a polynomial `g` over the dense subfield `ℚ` yields a
root `β` of `g` (hence algebraic over `ℚ`) arbitrarily close to `α`.
* The corresponding instances `DenselyNormedField ℂ_[p]` and
`SeparableSpace ℂ_[p]` are then inferred, `ℂ_[p]` being the completion of
`PadicAlgCl p`.
Supporting general instance:
* `DenselyNormedField (UniformSpace.Completion A)` for a densely normed field
`A` with `CompletableTopField A`, since the norm on the completion extends the
norm on `A`.
The existing `NontriviallyNormedField` instances on `PadicAlgCl p` and `ℂ_[p]`
are simplified to `inferInstance`, as they now follow from the new
`DenselyNormedField` instances. |
new-contributor |
123/19 |
Mathlib/Analysis/Normed/Field/Dense.lean,Mathlib/Analysis/Normed/Module/Completion.lean,Mathlib/NumberTheory/Padics/Complex.lean |
3 |
8 |
['YijunYuan', 'github-actions', 'pechersky'] |
riccardobrasca assignee:riccardobrasca |
3-50659 3 days ago |
5-42687 5 days ago |
6-16743 6 days |
| 31884 |
Thmoas-Guan author:Thmoas-Guan |
feat(RingTheory): definition of Gorenstein local ring |
In this PR, we gave basic definition of Gorenstein local ring and Gorestein ring and prove that they are stable under ring equiv.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41885
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
73/0 |
Mathlib.lean,Mathlib/RingTheory/Gorenstein/Defs.lean |
2 |
12 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
nobody |
3-44176 3 days ago |
3-49219 3 days ago |
3-51673 3 days |
| 26214 |
Thmoas-Guan author:Thmoas-Guan |
feat(Algebra): definition of depth |
In this PR, we defined the depth of two modules as the minimal order of nonvanishing `Ext` and the `I-depth` for ideal `I` and some basic properties. Including the equivalence of the two in the condition of rees theorem.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #26212
- [x] depends on: #32966
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
410/0 |
Mathlib.lean,Mathlib/RingTheory/Depth/Basic.lean |
2 |
11 |
['Thmoas-Guan', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
nobody |
3-42085 3 days ago |
8-36548 8 days ago |
21-32917 21 days |
| 42020 |
kebekus author:kebekus |
feat: separation lemma of Value Distribution Theory |
Begin the proof of the "Second Main Theorem of Value Distribution Theory" by establishing the classic separation lemma. The full formalized proof, which will be PRed piece by piece, is available on the internet at https://github.com/kebekus/ProjectVD
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis
LLM-generated
|
169/0 |
Mathlib.lean,Mathlib/Analysis/Complex/ValueDistribution/SecondMainTheorem.lean |
2 |
1 |
['github-actions'] |
nobody |
3-41921 3 days ago |
3-41921 3 days ago |
3-41801 3 days |
| 32058 |
Thmoas-Guan author:Thmoas-Guan |
feat(Algebra): Baer criterion for injective dimension |
In this PR, we added the cateory version of Baer criterion stating that `M` is injective iff `Ext^1(R/I, M)` vanish for all ideal `I`. By dimension shifting, we also have `M` has injective dimension not exceeding `n` iff `Ext^{n + 1}(R/I, M)` vanish for all ideal `I`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36980
- [x] depends on: #39305
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-category-theory
label:t-algebra$ |
172/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/Ext/Baer.lean,Mathlib/Algebra/Homology/DerivedCategory/Ext/EnoughProjectives.lean |
3 |
86 |
['Thmoas-Guan', 'dagurtomas', 'github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib-splicebot', 'mathlib4-merge-conflict-bot'] |
kim-em assignee:kim-em |
3-39489 3 days ago |
37-22604 37 days ago |
123-14199 123 days |
| 40535 |
smmercuri author:smmercuri |
feat: notation for adele rings |
Notation:
- `K∞` : `NumberField.InfiniteAdeleRing K`;
- `𝔸ᶠ[R, K]`: `IsDedekindDomain.FiniteAdeleRing R K`;
- `𝔸[R, K]` : `NumberField.AdeleRing R K`;
- specialisations `𝔸ᶠ[K]` and `𝔸[K]` to `R = RingOfIntegers K`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory
FLT
|
44/36 |
Mathlib/NumberTheory/NumberField/AdeleRing.lean,Mathlib/NumberTheory/NumberField/InfiniteAdeleRing.lean,Mathlib/RingTheory/DedekindDomain/FiniteAdeleRing.lean |
3 |
4 |
['MichaelStollBayreuth', 'github-actions', 'mathlib-merge-conflicts', 'smmercuri'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
3-39136 3 days ago |
12-46791 12 days ago |
44-15442 44 days |
| 31222 |
Thmoas-Guan author:Thmoas-Guan |
feat(Algebra): `Hom` commute with flat base change |
In this PR, we proved `Hom_S (M \tensor S, N \tensor S)` is base change of `Hom_R (M, N)` with respect to `LinearMap.baseChangeHom`.
Co-authored-by: Wang Jingting <wangjt2020@163.com>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #31218
- [x] depends on: #31219
- [x] depends on: #31696
[](https://gitpod.io/from-referrer/)
|
large-import
t-algebra
label:t-algebra$ |
48/0 |
Mathlib/Algebra/Module/FinitePresentation.lean |
1 |
9 |
['Thmoas-Guan', 'github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'themathqueen'] |
ocfnash assignee:ocfnash |
3-38684 3 days ago |
86-74806 86 days ago |
86-74952 86 days |
| 41557 |
lakesare author:lakesare |
feat(Analysis/Convolution): add convolution_symm, convolution, (3 more lemmas) |
**Upstreaming from Carleson: [/Carleson/ToMathlib/Analysis/Convolution.lean](https://github.com/fpvandoorn/carleson/blob/master/Carleson/ToMathlib/Analysis/Convolution.lean)**
___
### Upstreamed theorems
- **theorem convolution_symm**
- renamed `g` to `f'` (to reuse the existing section variable)
- **theorem AEStronglyMeasurable.convolution** (refactored)
- **lemma lintegral_enorm_convolution_integrand_le_eLpNorm_mul_eLpNorm** (refactored)
- removed the comment _"This implies both of the following theorems convolutionExists_of_memLp_memLp and enorm_convolution_le_eLpNorm_mul_eLpNorm."_, because the comment would create an impression that it's an auxiliary lemma that shouldn't be used on its own
- **theorem ConvolutionExists.of_memLp_memLp** (slightly refactored)
- `(hf : AEStronglyMeasurable f μ)` and `(hg : AEStronglyMeasurable g μ)` were removed, because we can derive those hypotheses from `hfp.aestronglyMeasurable` and `hgq.aestronglyMeasurable` respectively (which we did during refactoring)
- **theorem enorm_convolution_le_eLpNorm_mul_eLpNorm**
___
- **lemma lintegral_enorm_convolution_integrand_le_eLpNorm_mul_eLpNorm,
theorem ConvolutionExists.of_memLp_memLp,
theorem enorm_convolution_le_eLpNorm_mul_eLpNorm**
- turned `(hpq : p.HolderConjugate q)` into an instance implicit `[hpq : p.HolderConjugate q]` (there does exist a `class HolderConjugate` for ENNReals, so mathlib seems to use instance implicits in such cases, like e.g. [here](https://github.com/leanprover-community/mathlib4/blob/79aee35d9696d759b73eed71d7dde666750bc35e/Mathlib/Analysis/Normed/Lp/lpHolder.lean#L262))
- **theorem AEStronglyMeasurable.convolution,
lemma lintegral_enorm_convolution_integrand_le_eLpNorm_mul_eLpNorm,
theorem ConvolutionExists.of_memLp_memLp,
theorem enorm_convolution_le_eLpNorm_mul_eLpNorm**
- `L` was implicit, now became explicit (to comply with existing section variables)
- changed `[SigmaFinite μ]` to `[SFinite μ]` (because it's a weaker requirement [/Mathlib/MeasureTheory/Measure/Typeclasses/SFinite.lean#L191](https://github.com/leanprover-community/mathlib4/blob/9ef14c7b82f8a45f8dfc03dace26d6bb25023bac/Mathlib/MeasureTheory/Measure/Typeclasses/SFinite.lean#L191))
|
carleson
t-analysis
new-contributor
|
58/5 |
Mathlib/Analysis/Convolution.lean |
1 |
5 |
['github-actions', 'lakesare'] |
nobody |
3-38279 3 days ago |
3-38391 3 days ago |
14-61632 14 days |
| 40723 |
JovanGerb author:JovanGerb |
perf(Algebra/Ring/Defs): improve `NonUnitalSemiring` and `NonAssocSemiring` definitions |
This PR redefines `NonUnitalSemiring` and `NonAssocSemiring` in the same way that `Semiring` was recently redefined, to improve performance.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
53/37 |
Mathlib/Algebra/Ring/Defs.lean,Mathlib/Algebra/Ring/Ext.lean |
2 |
3 |
['JovanGerb', 'github-actions', 'leanprover-radar', 'themathqueen'] |
nobody |
3-33925 3 days ago |
39-5358 39 days ago |
39-5255 39 days |
| 42024 |
NoneMore author:NoneMore |
feat(Data/Set/Card): characterize finite lower bounds on encard |
A set has the cardinality at least `n` if and only if it has a sequence of length `n` with distinct elements.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
AI disclosure: The proof was structurally simplified following the `/lean4:golf` workflow from Lean 4 Skills.
[](https://gitpod.io/from-referrer/)
|
t-data |
16/0 |
Mathlib/Data/Set/Card.lean |
1 |
1 |
['github-actions'] |
nobody |
3-30580 3 days ago |
3-32567 3 days ago |
3-32447 3 days |
| 42010 |
grunweg author:grunweg |
chore(Archive): convert to the module system |
Mostly mechanical migration, akin to what `modulize.lean` would do: make all imports `public`, and add `@[expose] public section` at the beginning of each file. (In a few cases of files without definitions, omit the expose attribute.)
Inspired by #36236; re-done by hand. All files omitted there are actually fine to hand-convert.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
217/123 |
Counterexamples.lean,Counterexamples/AharoniKorman.lean,Counterexamples/CanonicallyOrderedCommSemiringTwoMul.lean,Counterexamples/CharPZeroNeCharZero.lean,Counterexamples/CliffordAlgebraNotInjective.lean,Counterexamples/Cyclotomic105.lean,Counterexamples/DimensionPolynomial.lean,Counterexamples/DirectSumIsInternal.lean,Counterexamples/DiscreteTopologyNonDiscreteUniformity.lean,Counterexamples/EulerSumOfPowers.lean,Counterexamples/Girard.lean,Counterexamples/HeawoodUnitDistance.lean,Counterexamples/HomogeneousPrimeNotPrime.lean,Counterexamples/InvertibleModuleNotIdeal.lean,Counterexamples/IrrationalPowerOfIrrational.lean,Counterexamples/MapFloor.lean,Counterexamples/MonicNonRegular.lean,Counterexamples/Motzkin.lean,Counterexamples/NowhereDifferentiable.lean,Counterexamples/OrderedCancelAddCommMonoidWithBounds.lean,Counterexamples/PeanoCurve.lean,Counterexamples/Phillips.lean,Counterexamples/PolynomialIsDomain.lean,Counterexamples/Pseudoelement.lean,Counterexamples/QuadraticForm.lean,Counterexamples/SeminormLatticeNotDistrib.lean,Counterexamples/SeparableNotSecondCountable.lean,Counterexamples/SorgenfreyLine.lean,Counterexamples/TopologistsSineCurve.lean,Counterexamples/ZeroDivisorsInAddMonoidAlgebras.lean |
30 |
6 |
['felixpernegger', 'github-actions', 'grunweg'] |
nobody |
3-27397 3 days ago |
4-9759 4 days ago |
4-9639 4 days |
| 42028 |
NoneMore author:NoneMore |
feat(ModelTheory/DirectLimit): bound cardinality of direct limits |
This PR adds cardinality bounds for direct limits in terms of their sigma type, index type, and component cardinalities.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-logic |
27/0 |
Mathlib/ModelTheory/DirectLimit.lean |
1 |
1 |
['github-actions'] |
nobody |
3-27388 3 days ago |
3-27941 3 days ago |
3-27821 3 days |
| 40604 |
xroblot author:xroblot |
feat(Algebra.GroupWithZero): generalize SMulZeroClass to MonoidWithZero and lift MulDistribMulAction to nonZeroDivisors |
Generalize the instance `SMulZeroClass α β` under `[Group α] [GroupWithZero β] [MulDistribMulAction α β]`to `[Group α] [MonoidWithZero β] [MulDistribMulAction α β]`.
From an action `[Group G] [MonoidWithZero M] [MulDistribMulAction G M]`, use this instance to construct an action on the nonzero divisors of 'M'.
**No diamond**: there is no general instance giving an action on a submonoid as a target (that would need the submonoid to be invariant, which isn't automatic), so defining the action on `nonZeroDivisors` should not clash with anything .
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra label:t-algebra$ |
55/6 |
Mathlib/Algebra/GroupWithZero/Action/Defs.lean,Mathlib/Algebra/GroupWithZero/NonZeroDivisors.lean,Mathlib/Algebra/Ring/Action/ConjAct.lean |
3 |
4 |
['github-actions', 'leanprover-radar', 'themathqueen'] |
nobody |
3-24581 3 days ago |
35-17599 35 days ago |
36-81957 36 days |
| 41918 |
CoolRmal author:CoolRmal |
feat(Topology/Order): separability is hereditary for linearly ordered topological spaces |
In this PR we prove that
1. `isTopologicalBasis_isOpen_ordConnected`: in a linearly ordered topological space, every point of an open set `U` has an open `Set.OrdConnected` neighbourhood contained in `U`.
2. `countable_setOf_isolated_subtype`: in a separable linearly ordered topological space, the points of a subset `s` that are isolated in the subspace `s` form a countable set.
3. A subset of a separable linearly ordered topological space is separable in the subspace topology. This is proved as an instance.
The material was developed for showing the measurability of the pathwise variation of a continuous stochastic process in https://github.com/RemyDegenne/brownian-motion/pull/494. Created with the help of Claude Code, carefully reviewed and golfed by myself.
|
t-topology |
149/0 |
Mathlib.lean,Mathlib/Topology/Closure.lean,Mathlib/Topology/Order/Separable.lean |
3 |
1 |
['github-actions'] |
nobody |
3-24159 3 days ago |
7-35462 7 days ago |
7-54003 7 days |
| 41189 |
ADedecker author:ADedecker |
feat: define Fredholm operators between TVSs |
Project started during the May 2026 workshop "Techniques and Tools for the Formalization of Analysis" at ICERM.
Co-authored-by: Jon Bannon <jbannon@siena.edu>
Co-authored-by: Yongxi (Aaron) Lin <aaronlin@andrew.cmu.edu>
Co-authored-by: Patrick Massot <patrickmassot@free.fr>
Co-authored-by: Oliver Nash <github@olivernash.org>
Co-authored-by: Filippo A. E. Nuccio <filippo.nuccio@univ-st-etienne.fr>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [x] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39100
- [x] depends on: #41038
- [x] depends on: #41229
- [x] depends on: #41250
[](https://gitpod.io/from-referrer/)
|
t-analysis
maintainer-merge
|
380/0 |
Mathlib.lean,Mathlib/Algebra/Module/LinearMap/FiniteRange.lean,Mathlib/Analysis/Normed/Operator/Fredholm/Basic.lean |
3 |
61 |
['ADedecker', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'themathqueen'] |
themathqueen assignee:themathqueen |
3-23513 3 days ago |
4-18579 4 days ago |
9-74674 9 days |
| 36275 |
smmercuri author:smmercuri |
feat: norm for the finite adele ring of a number field |
---
- [x] depends on: #35820
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
143/1 |
Mathlib.lean,Mathlib/NumberTheory/NumberField/Completion/FinitePlace.lean,Mathlib/NumberTheory/NumberField/FiniteAdeleRing.lean,Mathlib/RingTheory/DedekindDomain/FiniteAdeleRing.lean,Mathlib/Topology/Algebra/Valued/NormedValued.lean |
5 |
5 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
3-20684 3 days ago |
3-21815 3 days ago |
59-40281 59 days |
| 36845 |
grunweg author:grunweg |
feat: the Levi-Civita connection on a manifold |
Define the Levi-Civita connection on a (finite-dimensional) Riemannian manifold `(M, g)`.
A connection `∇` on the tangent bundle of `TM` is called a Levi-Civita connection if it is both compatible with the metric `g` and torsion-free. Any two such connections are equal (on differentiable vector fields), which is why one speaks of *the* Levi-Civita connection on `TM`. We construct a Levi-Civita connection and prove that is defines a compatible torsion-free connection.
- Our implementation uses a tensoriality argument and the musical isomorphism --- avoiding the use of local frames and trivialisations.
- We enable `fun_prop` for `MDifferentiable(At)` just in this file: this will be properly implemented in the future.
- Future PRs will prove that if `M` is `C^{k+2}` and `g` is `C^{n+1}`, the Levi-Civita connection is a `C^n` connection.
Co-authored-by: Heather Macbeth [25316162+hrmacbeth@users.noreply.github.com](mailto:25316162+hrmacbeth@users.noreply.github.com)
Co-authored-by: Patrick Massot [patrickmassot@free.fr](mailto:patrickmassot@free.fr)
---
- [x] depends on: #36299
- [x] depends on: #41175
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
476/2 |
Mathlib.lean,Mathlib/Geometry/Manifold/ContMDiffMFDeriv.lean,Mathlib/Geometry/Manifold/VectorBundle/CovariantDerivative/LeviCivita.lean,Mathlib/Geometry/Manifold/VectorBundle/MDifferentiable.lean,Mathlib/Topology/VectorBundle/Basic.lean |
5 |
37 |
['github-actions', 'grunweg', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'sgouezel'] |
sgouezel assignee:sgouezel |
3-15025 3 days ago |
3-15630 3 days ago |
19-56363 19 days |
| 39692 |
YaelDillies author:YaelDillies |
chore(Algebra/Order/BigOperators): follow the `₀` naming convention |
We have long agreed that `MonoidWithZero` lemmas corresponding to `Monoid` lemmas should be suffixed with `₀`, while currently it is the `Monoid` lemmas that are primed.
Also deprecate two primed lemmas that only differed from the unprimed versions in a minor way.
## Renames
Moves:
* `finprod_le_finprod'` → `finprod_le_finprod`
* `finprod_le_finprod` → `finprod_le_finprod₀`
* `Finset.prod_le_prod'` → `Finset.prod_le_prod`
* `Finset.one_le_prod'` → `Finset.one_le_prod`
* `Finset.one_le_prod''` → `Finset.one_le_prod`
* `Finset.sum_nonneg'` → `Finset.sum_nonneg`
* `Finset.prod_le_one'` → `Finset.prod_le_one`
* `Finset.prod_le_prod_of_subset_of_one_le'` → `Finset.prod_le_prod_of_subset_of_one_le`
* `Finset.prod_le_prod_of_subset_of_le_one'` → `Finset.prod_le_prod_of_subset_of_le_one`
* `Finset.prod_mono_set_of_one_le'` → `Finset.prod_mono_set_of_one_le`
* `Finset.prod_anti_set_of_le_one'` → `Finset.prod_anti_set_of_le_one`
* `Finset.prod_le_univ_prod_of_one_le'` → `Finset.prod_le_univ_prod_of_one_le`
* `Finset.prod_eq_one_iff_of_one_le'` → `Finset.prod_eq_one_iff_of_one_le`
* `Finset.prod_eq_one_iff_of_le_one'` → `Finset.prod_eq_one_iff_of_le_one`
* `Finset.single_le_prod'` → `Finset.single_le_prod`
* `Finset.prod_fiberwise_le_prod_of_one_le_prod_fiber'` → `Finset.prod_fiberwise_le_prod_of_one_le_prod_fiber`
* `Finset.prod_le_prod_fiberwise_of_prod_fiber_le_one'` → `Finset.prod_le_prod_fiberwise_of_prod_fiber_le_one`
* `Finset.abs_sum_of_nonneg'` → `Finset.abs_sum_of_nonneg`
* `Finset.prod_le_prod_of_subset'` → `Finset.prod_le_prod_of_subset`
* `Finset.prod_mono_set'` → `Finset.prod_mono_set`
* `Finset.prod_le_prod_of_ne_one'` → `Finset.prod_le_prod_of_ne_one`
* `Finset.prod_lt_prod'` → `Finset.prod_lt_prod`
* `Finset.prod_lt_prod_of_nonempty'` → `Finset.prod_lt_prod_of_nonempty`
* `Finset.prod_lt_prod_of_subset'` → `Finset.prod_lt_prod_of_subset`
* `Finset.single_lt_prod'` → `Finset.single_lt_prod`
* `Finset.exists_lt_of_prod_lt'` → `Finset.exists_lt_of_prod_lt`
* `Finset.exists_le_of_prod_le'` → `Finset.exists_le_of_prod_le`
* `Finset.exists_one_lt_of_prod_one_of_exists_ne_one'` → `Finset.exists_one_lt_of_prod_one_of_exists_ne_one`
* `Fintype.prod_mono'` → `Fintype.prod_mono`
* `Fintype.prod_strictMono'` → `Fintype.prod_strictMono`
* `List.Forall₂.prod_le_prod'` → `List.Forall₂.prod_le_prod`
* `List.Sublist.prod_le_prod'` → `List.Sublist.prod_le_prod`
* `List.SublistForall₂.prod_le_prod'` → `List.SublistForall₂.prod_le_prod`
* `List.prod_le_prod'` → `List.prod_le_prod`
* `List.prod_lt_prod'` → `List.prod_lt_prod`
* `List.exists_lt_of_prod_lt'` → `List.exists_lt_of_prod_lt`
* `List.exists_le_of_prod_le'` → `List.exists_le_of_prod_le`
* `Multiset.prod_lt_prod'` → `Multiset.prod_lt_prod`
* `Multiset.prod_lt_prod_of_nonempty'` → `Multiset.prod_lt_prod_of_nonempty`
* `Finset.prod_le_prod` → `Finset.prod_le_prod₀`
* `Finset.prod_le_one` → `Finset.prod_le_one₀`
* `Finset.one_le_prod` → `Finset.one_le_prod₀`
* `Finset.prod_le_prod_of_subset_of_one_le` → `Finset.prod_le_prod_of_subset_of_one_le₀`
* `Finset.prod_le_prod_of_subset_of_le_one` → `Finset.prod_le_prod_of_subset_of_le_one₀`
* `Finset.prod_mono_set_of_one_le` → `Finset.prod_mono_set_of_one_le₀`
* `Finset.prod_anti_set_of_le_one` → `Finset.prod_anti_set_of_le_one₀`
* `Finset.prod_lt_prod` → `Finset.prod_lt_prod₀`
* `Finset.prod_lt_prod_of_nonempty` → `Finset.prod_lt_prod_of_nonempty₀`
## Deprecations
* `Finset.sum_nonneg'`, `Finset.one_le_prod''`
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/345428-mathlib-reviewers/topic/The.20.E2.82.80.20suffix/with/604912624)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-order
label:t-algebra$ |
303/229 |
Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/Group/Submonoid/Pointwise.lean,Mathlib/Algebra/Order/BigOperators/Group/Finset.lean,Mathlib/Algebra/Order/BigOperators/Group/List.lean,Mathlib/Algebra/Order/BigOperators/Group/Multiset.lean,Mathlib/Algebra/Order/BigOperators/GroupWithZero/Finset.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Asymptotics/SpecificAsymptotics.lean,Mathlib/Analysis/BoxIntegral/DivergenceTheorem.lean,Mathlib/Analysis/Complex/Exponential.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/InnerProductSpace/Orientation.lean,Mathlib/Analysis/InnerProductSpace/Subspace.lean,Mathlib/Analysis/Normed/Ring/Basic.lean,Mathlib/Analysis/Normed/Ring/InfiniteProd.lean,Mathlib/Analysis/ODE/DiscreteGronwall.lean,Mathlib/Analysis/Polynomial/MahlerMeasure.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/Extremal.lean,Mathlib/Analysis/SpecificLimits/Basic.lean,Mathlib/MeasureTheory/Constructions/Pi.lean,Mathlib/MeasureTheory/Measure/HasOuterApproxClosedProd.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Measure/Lebesgue/VolumeOfBalls.lean,Mathlib/NumberTheory/Bertrand.lean,Mathlib/NumberTheory/Height/Basic.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/NumberTheory/NumberField/InfinitePlace/Basic.lean,Mathlib/NumberTheory/Primorial.lean,Mathlib/NumberTheory/SelbergSieve.lean,Mathlib/NumberTheory/SiegelsLemma.lean,Mathlib/NumberTheory/SmoothNumbers.lean,Mathlib/Probability/ProductMeasure.lean,Mathlib/RingTheory/Polynomial/Cyclotomic/Eval.lean,Mathlib/Topology/Algebra/InfiniteSum/ENNReal.lean,Mathlib/Topology/Algebra/InfiniteSum/Order.lean |
35 |
15 |
['Vierkantor', 'YaelDillies', 'b-mehta', 'github-actions', 'mathlib-bors', 'mathlib-merge-conflicts', 'vihdzp'] |
b-mehta assignee:b-mehta |
3-13180 3 days ago |
3-33893 3 days ago |
18-7148 18 days |
| 40724 |
justus-springer author:justus-springer |
feat(Analysis/InnerProductSpace): inner products on exterior powers |
Given a real inner product space `E`, we construct a canonical inner product on `⋀[ℝ]^n E` via the Gram determinant formula: on decomposable elements, `⟪v₁ ∧ ⋯ ∧ vₙ, w₁ ∧ ⋯ ∧ wₙ⟫ = det (⟪vⱼ, wᵢ⟫)ᵢⱼ`.
There are two generalizations of this construction: Going from `ℝ` to `RCLike`, and getting rid of the `FiniteDimensional` assumption. Both would require some prerequisites, hence they are left as future work for now (see the future work section of the module docstring).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
maintainer-merge |
159/0 |
Mathlib.lean,Mathlib/Analysis/InnerProductSpace/ExteriorPower.lean,Mathlib/Analysis/InnerProductSpace/GramMatrix.lean |
3 |
16 |
['github-actions', 'justus-springer', 'mckoen', 'tb65536'] |
nobody |
3-8698 3 days ago |
3-9811 3 days ago |
38-23795 38 days |
| 39537 |
robin-carlier author:robin-carlier |
feat(CategoryTheory/Bicategory/Span): bicategories of spans |
In this PR, we extend the constructions from #39536 to a bicategory structure on `Spans C Wₗ Wᵣ`, which is a type alias for `C`, where the 1-morphisms are spans in `C` with left leg satisfying `Wₗ` and the right leg satisfies `Wᵣ`.
From [SymmMonCoherence](https://github.com/robin-carlier/SymmMonCoherence)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39536
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
370/3 |
Mathlib/CategoryTheory/Bicategory/Span/Basic.lean |
1 |
8 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'robin-carlier'] |
nobody |
3-7391 3 days ago |
3-8242 3 days ago |
3-20143 3 days |
| 42032 |
YaelDillies author:YaelDillies |
feat(Topology): a union of closed sets, cofinitely many of which are empty, is closed |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
11/0 |
Mathlib/Data/Set/Lattice.lean,Mathlib/Topology/Basic.lean |
2 |
1 |
['github-actions'] |
nobody |
3-7269 3 days ago |
3-10391 3 days ago |
3-10365 3 days |
| 40788 |
FrankieNC author:FrankieNC |
feat: uniformly integrable Lᵖ tails tend to 0 uniformly |
Adds `UniformIntegrable.tendsto_iSup_eLpNorm_indicator_atTop`: for a uniformly
integrable family `f`,
Tendsto (fun M ↦ ⨆ i, eLpNorm ({x | M ≤ ‖f i x‖₊}.indicator (f i)) p μ) atTop (𝓝 0).
This is the `Tendsto` companion to the existing `UniformIntegrable.spec`, which only
provides, for each `ε`, a single threshold `C`.
This is the form that arises when truncating an L¹/Lᵖ family at increasing norm
levels — e.g. vector-valued truncation / Komlós-type arguments — where the existing
ProbabilityTheory.truncation does not apply, being real- and order-interval-valued.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
brownian
|
122/5 |
Mathlib/MeasureTheory/Function/UniformIntegrable.lean |
1 |
15 |
['CoolRmal', 'FrankieNC', 'github-actions'] |
FrankieNC assignee:FrankieNC |
3-5019 3 days ago |
34-73834 34 days ago |
37-74376 37 days |
| 37562 |
IvanRenison author:IvanRenison |
feat(Combinatorics/SimpleGraph): add several lemmas about when `Walk.bypass` and `Walk.cycleBypass` do nothing |
Co-authored-by: Vlad Tsyrklevich <vlad@tsyrklevi.ch>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37577
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
50/4 |
Mathlib/Combinatorics/SimpleGraph/Metric.lean,Mathlib/Combinatorics/SimpleGraph/Paths.lean |
2 |
24 |
['IvanRenison', 'SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'ocfnash', 'vlad902'] |
nobody |
2-79361 2 days ago |
2-79956 2 days ago |
27-79632 27 days |
| 39857 |
plp127 author:plp127 |
chore(Order/CompleteLattice/Basic): `Sort*` polymorphism |
Generalize some theorems from `Type*` to `Sort*`. Also make type-variables explicitly either `Type*` or `Sort*`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-order |
15/13 |
Mathlib/Order/CompleteLattice/Basic.lean |
1 |
5 |
['SnirBroshi', 'b-mehta', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
2-75399 2 days ago |
2-78292 2 days ago |
60-58950 60 days |
| 42041 |
FrankieNC author:FrankieNC |
feat(Topology/MetricSpace): minkowski (box-counting) dimension |
Define the lower and upper Minkowski (box-counting) dimensions of a set in a pseudo-emetric space via covering numbers, prove the basic API (monotonicity, closure invariance, unions, finite sets), and show `dimH s ≤ lowerMinkowskiDim s ≤ upperMinkowskiDim s` (Falconer, Fractal Geometry, Ch. 3). |
t-topology |
355/0 |
Mathlib.lean,Mathlib/Topology/MetricSpace/Cover.lean,Mathlib/Topology/MetricSpace/CoveringNumbers.lean,Mathlib/Topology/MetricSpace/MinkowskiDimension.lean,docs/references.bib |
5 |
2 |
['github-actions'] |
nobody |
2-72524 2 days ago |
2-73093 2 days ago |
2-73104 2 days |
| 39269 |
godofecht author:godofecht |
feat(Algebra/Spectrum): add the second resolvent identity |
Adds `spectrum.resolvent_sub_resolvent`:
For `a b : A` in an `R`-algebra and `r` in the resolvent set of both,
`resolvent a r - resolvent b r = resolvent a r * (a - b) * resolvent b r`.
Companion to `spectrum.resolvent_eq`. |
t-algebra
new-contributor
label:t-algebra$ |
12/0 |
Mathlib/Algebra/Algebra/Spectrum/Basic.lean |
1 |
9 |
['dagurtomas', 'github-actions', 'godofecht', 'themathqueen', 'wwylele'] |
ocfnash assignee:ocfnash |
2-67149 2 days ago |
10-31805 10 days ago |
54-65205 54 days |
| 41146 |
joelriou author:joelriou |
feat(CategoryTheory/Limits): weighted limits commute with (co)limits in the weight variable |
This is an adaptation of code from https://github.com/joelriou/reedy in order to allow uses both for Reedy categories and applications to hypercovers #41125. In particular, the proof of the preservations of limits with respect to the weight variable (which was obtained in https://github.com/joelriou/reedy in the most favourable case) is proven here in a similar manner as in #41125.
Co-authored-by: Yun Liu
- [x] depends on: #41163
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
267/0 |
Mathlib.lean,Mathlib/CategoryTheory/Limits/Weighted/HasWeightedLimit.lean,Mathlib/CategoryTheory/Limits/Weighted/PreservesLimit.lean,Mathlib/CategoryTheory/ObjectProperty/Equivalence.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
2-66248 2 days ago |
23-79376 23 days ago |
23-81973 23 days |
| 41184 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): more basic API for κ-filtered categories |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
23/0 |
Mathlib/CategoryTheory/Presentable/IsCardinalFiltered.lean |
1 |
5 |
['github-actions', 'joelriou', 'smorel394'] |
nobody |
2-66245 2 days ago |
26-36342 26 days ago |
26-36222 26 days |
| 41187 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): constructor for `IsCardinalPresentable` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
28/5 |
Mathlib/CategoryTheory/Presentable/Basic.lean |
1 |
8 |
['github-actions', 'joelriou', 'smorel394'] |
nobody |
2-66245 2 days ago |
25-51236 25 days ago |
26-35067 26 days |
| 41190 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): functors which preserve κ-presentable objects |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
62/1 |
Mathlib.lean,Mathlib/CategoryTheory/Presentable/Basic.lean,Mathlib/CategoryTheory/Presentable/PreservesCardinalPresentable.lean |
3 |
3 |
['github-actions', 'smorel394'] |
nobody |
2-66244 2 days ago |
26-34576 26 days ago |
26-34456 26 days |
| 41244 |
joelriou author:joelriou |
chore(CategoryTheory/Adjunction/AdjointFunctorTheorems): generalize universes |
For theorems involving a category `C : Type u` (with `Category.{v} C`), the smallness assumptions or the existence of limits/colimits are expressed relative to an arbitrary universe `w` (instead of `w = v`), provided the assumption `LocallySmall.{w} C` is added. (This makes this more coherent with the API about locally presentable/accessible categories.)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
71/36 |
Mathlib/CategoryTheory/Adjunction/AdjointFunctorTheorems.lean,Mathlib/CategoryTheory/Comma/StructuredArrow/Small.lean,Mathlib/CategoryTheory/Limits/Constructions/WeaklyInitial.lean,Mathlib/CategoryTheory/Limits/Shapes/WideEqualizers.lean |
4 |
6 |
['github-actions', 'smorel394'] |
nobody |
2-66243 2 days ago |
21-83359 21 days ago |
24-75087 24 days |
| 41301 |
joelriou author:joelriou |
feat(CategoryTheory): (co)kernels in functor categories/homological complexes |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
97/2 |
Mathlib.lean,Mathlib/Algebra/Homology/HomologicalComplexKernels.lean,Mathlib/CategoryTheory/Limits/FunctorCategory/Shapes/Kernels.lean |
3 |
1 |
['github-actions'] |
nobody |
2-66242 2 days ago |
24-16463 24 days ago |
24-16343 24 days |
| 41121 |
Scarlett-le author:Scarlett-le |
feat(Geometry/Euclidean/Angle): add the Alternate segment theorem |
Adds the Alternate segment theorem to`Mathlib/Geometry/Euclidean/Angle/Sphere.lean`:
if a line is tangent to a sphere `s` at `p₁`
and `p₁`, `p₂`, `p₃` lie on `s`, then twice the oriented angle from the tangent to the chord
`p₁p₂` equals twice the inscribed angle subtending `p₁p₂` at `p₃`. As elsewhere in this file,
the angles are doubled because the underlying oriented angles agree only mod `π`.
## Dependencies
- [x] depends on: #41143 |
t-euclidean-geometry
maintainer-merge
|
27/0 |
Mathlib/Geometry/Euclidean/Angle/Sphere.lean |
1 |
7 |
['felixpernegger', 'github-actions', 'jsm28', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
2-66238 2 days ago |
24-58911 24 days ago |
27-17645 27 days |
| 40879 |
vihdzp author:vihdzp |
feat: lemmas about the `smallInductiveDimension` |
We prove various lemmas about the `smallInductiveDimension` of a topological space, as well as interactions with the `HasSmallInductiveDimensionLT` and `HasSmallInductiveDimensionLE` typeclasses.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #40897
- [x] depends on: #40878
[](https://gitpod.io/from-referrer/)
|
t-topology |
59/8 |
Mathlib/Topology/SmallInductiveDimension.lean |
1 |
6 |
['github-actions', 'j-loreaux', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
2-57482 2 days ago |
2-58399 2 days ago |
2-71952 2 days |
| 39847 |
vihdzp author:vihdzp |
chore: redefine `Ordinal.preOmega` using `Order.enum` |
The plan is to deprecate `Ordinal.enumOrd` in favor of `Order.enum`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39136
[](https://gitpod.io/from-referrer/)
|
t-set-theory |
23/21 |
Mathlib/Order/Cofinal.lean,Mathlib/SetTheory/Cardinal/Aleph.lean |
2 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
2-45780 2 days ago |
2-47509 2 days ago |
2-76083 2 days |
| 41981 |
YaelDillies author:YaelDillies |
refactor(Algebra/Polynomial): make into an `abbrev` of `AddMonoidAlgebra` |
... and deprecate the declarations that are now tautological (`toFinsupp`/`ofFinsupp` and their API). For some of the `Polynomial` declarations that needed changing, it was simplest to replace them with the corresponding `AddMonoidAlgebra` one. Note that this replacement is far from exhaustive (a majority of the `Polynomial` API could be replaced this way).
Note that `algebraMap R R[X]` has changed defeq.
[Zulip](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Reworking.20Finsupp.2C.20MonoidAlgebra.2C.20HahnSeries.2E.20PowerSeries/with/609275708)
Generated through several rounds of manual review with Claude Opus. Heavily edited by hand afterwards.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt
t-algebra
LLM-generated
label:t-algebra$ |
337/538 |
Mathlib/Algebra/MonoidAlgebra/MapDomain.lean,Mathlib/Algebra/MonoidAlgebra/Support.lean,Mathlib/Algebra/Polynomial/AlgebraMap.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/Algebra/Polynomial/Basis.lean,Mathlib/Algebra/Polynomial/Cardinal.lean,Mathlib/Algebra/Polynomial/Coeff.lean,Mathlib/Algebra/Polynomial/Degree/Defs.lean,Mathlib/Algebra/Polynomial/Degree/IsMonicOfDegree.lean,Mathlib/Algebra/Polynomial/Degree/Operations.lean,Mathlib/Algebra/Polynomial/Degree/Support.lean,Mathlib/Algebra/Polynomial/Derivative.lean,Mathlib/Algebra/Polynomial/Eval/Coeff.lean,Mathlib/Algebra/Polynomial/Eval/Defs.lean,Mathlib/Algebra/Polynomial/Eval/Degree.lean,Mathlib/Algebra/Polynomial/FieldDivision.lean,Mathlib/Algebra/Polynomial/GroupRingAction.lean,Mathlib/Algebra/Polynomial/Inductions.lean,Mathlib/Algebra/Polynomial/Laurent.lean,Mathlib/Algebra/Polynomial/Module/Basic.lean,Mathlib/Algebra/Polynomial/Monic.lean,Mathlib/Algebra/Polynomial/Monomial.lean,Mathlib/Algebra/Polynomial/OfFn.lean,Mathlib/Algebra/Polynomial/Reverse.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Algebra/Polynomial/UnitTrinomial.lean,Mathlib/Algebra/Ring/Subring/IntPolynomial.lean,Mathlib/FieldTheory/SeparablyGenerated.lean,Mathlib/LinearAlgebra/Finsupp/VectorSpace.lean,Mathlib/LinearAlgebra/Lagrange.lean,Mathlib/RingTheory/IsAdjoinRoot.lean,Mathlib/RingTheory/KrullDimension/Polynomial.lean,Mathlib/RingTheory/Polynomial/Basic.lean,Mathlib/RingTheory/Polynomial/Opposites.lean,Mathlib/RingTheory/PowerBasis.lean,Mathlib/RingTheory/PowerSeries/Derivative.lean,Mathlib/RingTheory/Spectrum/Prime/Topology.lean,Mathlib/RingTheory/ZariskisMainTheorem.lean,Mathlib/Tactic/ReduceModChar.lean,MathlibTest/InstanceDiamonds.lean |
40 |
8 |
['NoahW314', 'YaelDillies', 'github-actions', 'leanprover-radar', 'tb65536'] |
nobody |
2-45648 2 days ago |
4-52485 4 days ago |
4-54862 4 days |
| 42030 |
YaelDillies author:YaelDillies |
feat(Topology/Order): the bornology of an unbounded order is non-trivial |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology |
17/3 |
Mathlib/Order/Filter/Basic.lean,Mathlib/Topology/Order/Bornology.lean |
2 |
1 |
['github-actions'] |
nobody |
2-43899 2 days ago |
3-11324 3 days ago |
3-11204 3 days |
| 41919 |
junjihashimoto author:junjihashimoto |
feat(Algebra): the Cayley-Dickson construction, octonions and sedenions |
We define the Cayley–Dickson double of a (possibly non-associative) star ring, and show that it preserves `NonAssocRing` and `StarRing`, so the construction can be iterated indefinitely: quaternions → octonions → sedenions → trigintaduonions → …. The octonions and sedenions are defined as the corresponding levels of the tower over `Quaternion R`.
The key lemma is `CayleyDickson.unit_mul_unit_mul`: the doubling unit `ℓ = ⟨0, 1⟩` satisfies `ℓ * (ℓ * x) = -x` at *every* level of the tower, by a computation that only uses that `star` is an involution — no alternativity is developed (and indeed the sedenions are not alternative and have zero divisors). Left multiplication by `ℓ` is therefore a complex structure on every Cayley–Dickson algebra; in a follow-up PR this yields Plancherel's theorem and the Fourier inversion formula for the hypercomplex (octonion, sedenion, …) Fourier transforms, by reduction to the vector-valued `L²` Fourier theory.
TODO (deliberately left for future work, noted in the module docstring): alternativity of the double of an associative star ring (Moufang identities), the multiplicative norm for composition algebras.
- [ ] depends on: (nothing)
|
t-algebra
new-contributor
label:t-algebra$ |
315/0 |
Mathlib.lean,Mathlib/Algebra/CayleyDickson.lean,Mathlib/Algebra/Octonion.lean |
3 |
9 |
['github-actions', 'vihdzp'] |
nobody |
2-43129 2 days ago |
7-28218 7 days ago |
7-28588 7 days |
| 42027 |
loefflerd author:loefflerd |
chore(Data/FunLike): tag `IsApply` lemmas as simp |
The new `IsApply` typeclasses allow many existing special-case `coe_xxx` lemmas to be unified; but the general lemmas currently do not have the simp tag. This tags them as simp.
Other minor changes:
- There were two lemmas with statements identical up to argument order: `FunLike.coe_smul` (directly written) and `FunLike.coe_smul'` (auto-generated by `to_additive`). I unified these using `to_additive existing`, with a deprecation alias for `FunLike.coe_smul'`.
- Downstream code that uses `FunLike.coe_smul'` is adjusted appropriately (un-squeezing a couple of lengthy terminal `simp only`'s in the process).
- One more specific simp lemma downstream (`ContinuousLinearMap.coe_pow'`) is removed, because `simp` can now prove it using the `FunLike` simp lemmas. A misnamed lemma in this file, `ContinuousLinearMap.coe_pow`, was re-named to `ContinuousLinearMap.toLinearMap_pow`.
- There were just two simps (both in `Mathlib/Probability/Distributions/Gaussian/Basic.lean`) which broke, because they used an un-squeezed `simp` along with an additional explicitly provided lemma (not part of the default simp set) that conflicted with `FunLike.coe_zero`. These I fixed by explicitly removing `FunLike.coe_zero` from the simp set where necessary.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
maintainer-merge
|
44/50 |
Mathlib/Analysis/SpecialFunctions/Pow/Deriv.lean,Mathlib/Data/FunLike/IsApply.lean,Mathlib/LinearAlgebra/Eigenspace/ContinuousLinearMap.lean,Mathlib/MeasureTheory/VectorMeasure/SetIntegral.lean,Mathlib/NumberTheory/ModularForms/JacobiTheta/TwoVariable.lean,Mathlib/Probability/Distributions/Gaussian/Basic.lean,Mathlib/Topology/Algebra/Module/ContinuousLinearMap/Basic.lean |
7 |
17 |
['github-actions', 'leanprover-radar', 'loefflerd', 'mcdoll'] |
nobody |
2-38526 2 days ago |
2-44918 2 days ago |
3-22731 3 days |
| 41544 |
YaelDillies author:YaelDillies |
refactor(Algebra/Polynomial): make `coeff` return a `Finsupp` |
This matches `AddMonoidAlgebra`.
Change made by myself, build fixed by Claude Opus, with the fixes reviewed by myself again.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
29/23 |
Counterexamples/MapFloor.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/AlgebraicGeometry/EllipticCurve/DivisionPolynomial/Degree.lean,Mathlib/Data/Nat/Choose/Lucas.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/Coeff.lean,Mathlib/RingTheory/IsAdjoinRoot.lean,Mathlib/RingTheory/Polynomial/Eisenstein/IsIntegral.lean,Mathlib/RingTheory/Polynomial/ScaleRoots.lean,Mathlib/RingTheory/Polynomial/UniversalFactorizationRing.lean,Mathlib/RingTheory/Polynomial/Vieta.lean,Mathlib/RingTheory/PowerSeries/Basic.lean,Mathlib/Tactic/ComputeDegree.lean |
12 |
3 |
['SnirBroshi', 'YaelDillies', 'github-actions'] |
nobody |
2-37418 2 days ago |
12-41597 12 days ago |
12-43312 12 days |
| 41533 |
YaelDillies author:YaelDillies |
refactor: notation for `EventuallyEq` on `Set` |
Introduce definitions `EventuallyEqSet`, `EventuallySubset` as the `Set` versions of `EventuallyEq` and `EventuallyLE`. Make the notations `x =ᶠ[l] y`, `x ≤ᶠ[l] y` `x =ᵐ[μ] y`. elaborate to either the `Set` or functiion version depending on the expected type of the argument.
In mathlib, we currently use the function predicates for sets, which abuses the `Set α := α → Prop` defeq and which will break once we make `Set` a one-field structure.
Note that some simp lemmas aren't in simp normal form anymore because `(· ∈ someSetConstruction)` simplifies already. We might want to make the above into actual definitions instead of notation to avoid this.
Generated by Claude Opus, reviewed line by line by myself, with a large amount of manual edits and further Claude prompting to polish the angles.
Assisted-by: Claude Opus 4.8
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
LLM-generated
t-measure-probability
|
695/332 |
Mathlib/Analysis/Analytic/Basic.lean,Mathlib/Analysis/Calculus/ContDiff/Defs.lean,Mathlib/Analysis/Calculus/ContDiff/FTaylorSeries.lean,Mathlib/Analysis/Calculus/ContDiff/Operations.lean,Mathlib/Analysis/Calculus/FDeriv/Congr.lean,Mathlib/Analysis/Calculus/FDeriv/Symmetric.lean,Mathlib/Analysis/Calculus/VectorField.lean,Mathlib/Dynamics/Ergodic/Conservative.lean,Mathlib/Dynamics/Ergodic/Ergodic.lean,Mathlib/Dynamics/Ergodic/RadonNikodym.lean,Mathlib/Geometry/Manifold/ContMDiff/Atlas.lean,Mathlib/Geometry/Manifold/ContMDiff/Defs.lean,Mathlib/Geometry/Manifold/IsManifold/ExtChartAt.lean,Mathlib/Geometry/Manifold/LocalInvariantProperties.lean,Mathlib/Geometry/Manifold/MFDeriv/Basic.lean,Mathlib/Geometry/Manifold/VectorField/LieBracket.lean,Mathlib/MeasureTheory/Function/ConditionalExpectation/AEMeasurable.lean,Mathlib/MeasureTheory/Function/ConvergenceInMeasure.lean,Mathlib/MeasureTheory/Function/StronglyMeasurable/AEStronglyMeasurable.lean,Mathlib/MeasureTheory/Group/Action.lean,Mathlib/MeasureTheory/Group/FundamentalDomain.lean,Mathlib/MeasureTheory/Integral/Bochner/Set.lean,Mathlib/MeasureTheory/Integral/CurveIntegral/Basic.lean,Mathlib/MeasureTheory/Integral/IntegrableOn.lean,Mathlib/MeasureTheory/Integral/Layercake.lean,Mathlib/MeasureTheory/MeasurableSpace/EventuallyMeasurable.lean,Mathlib/MeasureTheory/Measure/AEMeasurable.lean,Mathlib/MeasureTheory/Measure/Comap.lean,Mathlib/MeasureTheory/Measure/ContinuousPreimage.lean,Mathlib/MeasureTheory/Measure/EverywherePos.lean,Mathlib/MeasureTheory/Measure/Lebesgue/Basic.lean,Mathlib/MeasureTheory/Measure/MeasureSpace.lean,Mathlib/MeasureTheory/Measure/NullMeasurable.lean,Mathlib/MeasureTheory/Measure/Regular.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/MeasureTheory/Measure/Typeclasses/Finite.lean,Mathlib/MeasureTheory/OuterMeasure/AE.lean,Mathlib/MeasureTheory/OuterMeasure/BorelCantelli.lean,Mathlib/NumberTheory/WellApproximable.lean,Mathlib/Order/Filter/Basic.lean,Mathlib/Order/Filter/CardinalInter.lean,Mathlib/Order/Filter/CountableInter.lean,Mathlib/Order/Filter/Defs.lean,Mathlib/Order/Filter/Finite.lean,Mathlib/Order/Filter/IndicatorFunction.lean,Mathlib/Probability/BorelCantelli.lean,Mathlib/Probability/Distributions/Fernique.lean,Mathlib/Probability/Process/LocalProperty.lean,Mathlib/Topology/Baire/BaireMeasurable.lean,Mathlib/Topology/ContinuousOn.lean,Mathlib/Topology/NhdsWithin.lean,Mathlib/Topology/OpenPartialHomeomorph/Continuity.lean,Mathlib/Topology/Separation/Basic.lean |
53 |
6 |
['SnirBroshi', 'YaelDillies', 'github-actions', 'themathqueen'] |
urkud assignee:urkud |
2-37396 2 days ago |
2-40503 2 days ago |
11-80139 11 days |
| 39808 |
chenson2018 author:chenson2018 |
chore(Data): refactor proofs where `grind?` fails |
These are sources of technical debt as now reported in the [weekly linting report](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log/with/544658968). The idea is that a successful `grind` proof can fail to report the theorems it used via `grind?`, which means that if these proofs break across toolchains that it becomes significantly harder to repair.
Most of these are fixed by squeezing the call to `grind` and unsetting `linter.tacticAnalysis.verifyGrindOnly` so they no longer appear in the weekly report. Unfortunately, this can't be on by default for performance reasons, but I highly encourage using this linter when adding any `grind` proofs.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
tech debt
|
69/41 |
Mathlib/Data/Bool/Basic.lean,Mathlib/Data/Bool/Set.lean,Mathlib/Data/EReal/Operations.lean,Mathlib/Data/Fin/Tuple/NatAntidiagonal.lean,Mathlib/Data/Finset/Image.lean,Mathlib/Data/Finset/Powerset.lean,Mathlib/Data/Finset/Range.lean,Mathlib/Data/Finset/SMulAntidiagonal.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Chain.lean,Mathlib/Data/List/Count.lean,Mathlib/Data/List/Cycle.lean,Mathlib/Data/List/Induction.lean,Mathlib/Data/List/ReduceOption.lean,Mathlib/Data/List/Sigma.lean,Mathlib/Data/List/Sort.lean,Mathlib/Data/List/TakeDrop.lean,Mathlib/Data/List/Triplewise.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Set/Card.lean,Mathlib/Data/Set/Disjoint.lean,Mathlib/Data/Set/Function.lean,Mathlib/Data/Set/Insert.lean,Mathlib/Data/Sum/Order.lean |
24 |
4 |
['Vierkantor', 'chenson2018', 'github-actions'] |
nobody |
2-36960 2 days ago |
62-51589 62 days ago |
62-51469 62 days |
| 41866 |
YaelDillies author:YaelDillies |
feat(GroupTheory): ` AddSubgroupClass` implies `SMulMemClass` over `ℤ` |
This is useful to talk about lattices in R^n.
Also delete two instances that are now automatically inferred.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
8/9 |
Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Basic.lean,Mathlib/Analysis/Normed/Ring/Basic.lean,Mathlib/GroupTheory/GroupAction/SubMulAction.lean |
3 |
1 |
['github-actions'] |
nobody |
2-36259 2 days ago |
2-38423 2 days ago |
2-41491 2 days |
| 37878 |
YaelDillies author:YaelDillies |
chore(Combinatorics/SimpleGraph): avoid structure relation predicates |
Relation predicates used to be `def`s over a `forall`, which was optimal for usability in fields of other structures. This changed in #35591 and #35192 as a byproduct of reducing apparent code duplication. Unfortunately, the usability issue was overlooked.
This PR restores usability by dropping the use of those relation classes that are `structure`s, ie `Std.Irrefl` and `Std.Transitive`. It also uses more widely the `simp` auto-param on `SimpleGraph.loopless`.
---
- [x] depends on: #38554
I would also be happy to revert #35591 and #35192 since this demonstrates a good use case for the `def` versions of the relation predicates.
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
86/90 |
Archive/Wiedijk100Theorems/Konigsberg.lean,Mathlib/Combinatorics/Graph/Simple.lean,Mathlib/Combinatorics/SimpleGraph/AdjMatrix.lean,Mathlib/Combinatorics/SimpleGraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Bipartite.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/CompleteMultipartite.lean,Mathlib/Combinatorics/SimpleGraph/Extremal/ErdosStoneSimonovits.lean,Mathlib/Combinatorics/SimpleGraph/FiveWheelLike.lean,Mathlib/Combinatorics/SimpleGraph/Hall.lean,Mathlib/Combinatorics/SimpleGraph/LineGraph.lean,Mathlib/Combinatorics/SimpleGraph/Maps.lean,Mathlib/Combinatorics/SimpleGraph/Operations.lean,Mathlib/Combinatorics/SimpleGraph/Prod.lean,Mathlib/Combinatorics/SimpleGraph/Regularity/Uniform.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean,Mathlib/Combinatorics/SimpleGraph/Sum.lean,Mathlib/Combinatorics/SimpleGraph/Trails.lean,Mathlib/Combinatorics/SimpleGraph/Triangle/Tripartite.lean,Mathlib/ModelTheory/Graph.lean,Mathlib/Order/RelClasses.lean |
21 |
19 |
['SnirBroshi', 'Vierkantor', 'YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
b-mehta assignee:b-mehta |
2-36112 2 days ago |
2-39241 2 days ago |
57-9630 57 days |
| 37067 |
kbuzzard author:kbuzzard |
feat: add_group tactic |
Written by Claude Code, additivising the `group` tactic, although there were some problems which needed human input.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
This is me burning Claude credits as a result of this comment [#mathlib4 > MulAut and to_additive @ 💬](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/MulAut.20and.20to_additive/near/581059625) . Just to be clear, all comments below are human-written by me with 0 AI assistance.
To my amusement, naively additivising the `group` tactic to make an `add_group` tactic does not work. The problem is that the algorithm run by `group` involves adding `← zpow_neg_one` to the simp set, which rewrites `x⁻¹` to `x ^ (-1)` for `x` in any group: the idea is that `x ^ (z : Int)` is preferred in the algorithm and `x⁻¹` is eliminated. Amusingly, when additivised, this becomes `-x -> -1 • x` which then immediately becomes `(-1 • 1) • x` which then becomes `((-1 • 1) • 1) • x` etc etc, as the integers are themselves an additive group. So we need to find another way of normalising terms of the form `-x`. The idea is to simply prove a bunch more simp lemmas which will deal with things like `-x + x` etc.
|
t-meta
LLM-generated
|
233/0 |
Mathlib.lean,Mathlib/Tactic.lean,Mathlib/Tactic/AddGroup.lean,MathlibTest/Tactic/AddGroup.lean |
4 |
32 |
['JovanGerb', 'SnirBroshi', 'github-actions', 'joneugster', 'kbuzzard', 'mathlib-merge-conflicts', 'thorimur'] |
thorimur assignee:thorimur |
2-35249 2 days ago |
2-40375 2 days ago |
42-3701 42 days |
| 38716 |
YaelDillies author:YaelDillies |
feat(Algebra/Order): `NNRat.cast_sub` |
From AddCombi
---
- [x] depends on: #41850
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
13/2 |
Mathlib/Algebra/Order/Field/Rat.lean,Mathlib/Data/NNRat/Defs.lean |
2 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
mattrobball assignee:mattrobball |
2-35192 2 days ago |
2-37259 2 days ago |
2-43424 2 days |
| 41707 |
marcelolynch author:marcelolynch |
fix(cache): carry decompression pipeline state across download rounds |
`cache get` downloads files in multiple rounds (corresponding to azure containers, e.g. `master` then `forks` for a fork PR) and decompresses them in a pipeline while the download streams.
Each round started from a fresh pipeline state and the round loop kept only the last round's state, so some files queued for decompression plus the in-flight leantar batch was dropped: the .ltars were on disk but never unpacked, and the next lake build recompiled those modules.
The in-flight leantar was also never awaited, so it could still be writing build outputs while lake build read them.
Reported in https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/cache.20issues/with/609923362
The fix makes the pipeline state an explicit value threaded through the rounds: a DecompState structure (pending files, in-flight batch, counters) embedded in TransferState, and finalizeDecomp drain after the last round.
Also adds related tests in Cache/Test.lean. |
CI
maintainer-merge
|
164/58 |
Cache/Requests.lean,Cache/Test.lean |
2 |
6 |
['github-actions', 'joneugster', 'marcelolynch'] |
joneugster assignee:joneugster |
2-32002 2 days ago |
6-14300 6 days ago |
9-68120 9 days |
| 40468 |
BoltonBailey author:BoltonBailey |
feat(Data/Nat/Choose/Multinomial): add positivity support |
This PR adds `positivity` tactic support for `Multiset.multinomial`, by adding a `_pos` theorem and an extension.
This was done as a part of Project Numina's LeanTriathlon project. AI was used as an assistant in the creation of this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data
maintainer-merge
|
24/0 |
Mathlib/Data/Nat/Choose/Multinomial.lean |
1 |
8 |
['BoltonBailey', 'github-actions', 'joneugster'] |
joneugster assignee:joneugster |
2-30619 2 days ago |
6-2213 6 days ago |
42-10979 42 days |
| 41696 |
vaca22 author:vaca22 |
feat(RingTheory): generalize relNorm_eq_pow_of_isMaximal to separable fraction field extensions |
This PR relaxes the hypothesis of Ideal.relNorm_eq_pow_of_isMaximal and its supporting Ring.NormalClosure instances.
Originally the theorem required the fraction ring of base Dedekind domain R to be a perfect field. Now we only require the fraction field extension to be separable.
The perfect field condition excludes function fields with imperfect constant fields, which is an important case we want to support. The core mathematical insight is that the normal closure of a separable field extension stays separable, so we can construct the Galois structure without a perfect base.
This change is fully backwards compatible: any existing code relying on the old perfect field assumption still compiles, since perfect fields automatically give separable extensions. Only two files are modified: NormalClosure.lean and RelNorm.lean, with small diff and no extra imports.
AI disclosure: I used AI tools to assist with initial code drafting and full CI validation. All mathematical reasoning and proof logic I worked through independently, and I can explain every adjustment in review. My original PR text relied too heavily on AI output, I’ve fully rewritten this description manually. |
new-contributor
t-ring-theory
LLM-generated
|
17/2 |
Mathlib/RingTheory/Ideal/Norm/RelNorm.lean,Mathlib/RingTheory/NormalClosure.lean |
2 |
10 |
['felixpernegger', 'github-actions', 'vaca22', 'xroblot'] |
nobody |
2-30289 2 days ago |
4-4026 4 days ago |
9-12816 9 days |
| 41765 |
riccardobrasca author:riccardobrasca |
feat: add Mathlib.NumberTheory.NumberField.DirichletDensity |
This PR defines the Dirichlet density of a set of ideals.
---
A first version of the code has been written by Claude, but it has gone through extensive review by the authors.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
113/0 |
Mathlib.lean,Mathlib/NumberTheory/NumberField/DirichletDensity.lean |
2 |
16 |
['github-actions', 'loefflerd', 'tb65536', 'xroblot'] |
tb65536 assignee:tb65536 |
2-29181 2 days ago |
3-70151 3 days ago |
6-80 6 days |
| 42046 |
LegaSage author:LegaSage |
feat(Polynomial): add Wronskian linear dependence lemmas |
This extends the polynomial Wronskian API of Baek and Lee from the existing coprime case to arbitrary polynomials over a characteristic-zero field.
It adds:
* an explicit nontrivial scalar relation for any pair with zero Wronskian, including zero-polynomial edge cases;
* scalar-multiple corollaries when either polynomial is nonzero;
* the weighted derivative corollary that solutions of `a * f' - n * a' * f = 0` are scalar multiples of `a ^ n` when `a ≠ 0`.
The proof factors out the polynomial gcd and applies the existing `IsCoprime.wronskian_eq_zero_iff` theorem. This PR makes no novelty claim; it packages standard consequences of the existing Baek–Lee coprime Wronskian API.
-------
The implementation was prepared with assistance from OpenAI Codex and reviewed and submitted by LegaSage.
|
t-ring-theory
new-contributor
large-import
LLM-generated
|
96/1 |
Mathlib/RingTheory/Polynomial/Wronskian.lean |
1 |
2 |
['github-actions'] |
nobody |
2-26963 2 days ago |
2-64933 2 days ago |
2-64813 2 days |
| 42047 |
LegaSage author:LegaSage |
feat(RingTheory): add locally nilpotent derivations |
This introduces `Derivation.IsLocallyNilpotent` and basic iteration lemmas for locally nilpotent derivations. The main result is the method-style theorem `Derivation.IsLocallyNilpotent.apply_eq_zero_of_dvd`: over a characteristic-zero domain, if `f ∣ D f` for a locally nilpotent derivation `D`, then `D f = 0`.
The proof uses the iterated Leibniz rule and the top nonvanishing iterates of the two factors.
-----
The implementation and PR text were prepared with assistance from OpenAI Codex. |
t-ring-theory
new-contributor
LLM-generated
|
167/0 |
Mathlib.lean,Mathlib/RingTheory/Derivation/LocallyNilpotent.lean |
2 |
2 |
['github-actions'] |
nobody |
2-26944 2 days ago |
2-64933 2 days ago |
2-64813 2 days |
| 41757 |
wwylele author:wwylele |
doc: add theorem 8 (straightedge-and-compass construction) to 100.yaml |
Adding my repo as an external proof to the theorems.
---
A hard part of these theorems is verifying the definition and the statement. I have extracted the relevant definition in the [Challenge.lean file](https://github.com/wwylele/Compass/blob/master/Challenge.lean) for review. This is also verifiable using comparator. I followed [wikipedia](https://en.wikipedia.org/wiki/Straightedge_and_compass_construction#The_basic_constructions) for the definition of constructibility
Zulip thread: [#general > The impossibility of trisecting the angle](https://leanprover.zulipchat.com/#narrow/channel/113488-general/topic/The.20impossibility.20of.20trisecting.20the.20angle/with/610005158) (there is discussion about whether this definition allows "picking an arbitrary point")
I plan to upstream some or all of the project, but I anticipate it to be a long process, and it is not clear to me whether the entire project is within the scope of Mathlib, which is why I am only adding a link to the repo for now
AI usage disclosure: [this 63 lines](https://github.com/wwylele/Compass/blob/1352a83753052bc9a069b52aced81785dccb0aba/Compass/ConstructibleNumber.lean#L45-L111) were generated by Aristotle. The rest were written by me.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
documentation |
3/0 |
docs/100.yaml |
1 |
2 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
2-25258 2 days ago |
11-80648 11 days ago |
11-80528 11 days |
| 41995 |
YaelDillies author:YaelDillies |
feat(RingTheory): bialgebra homs `R[G] → R[H]` are in bijection with group homs `G → H` |
... for abelian groups `G` and `H`. Furthermore, the convolution product on bialgebra homs corresponds to pointwise addition on group homs.
Also generate more lemmas through `to_additive`, remove some unused `set_option`s and relocate `MonoidAlgebra.toAdditive`/`AddMonoidAlgebra.toMultiplicative` to existing sections.
From Toric
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
toric
large-import
|
335/45 |
Mathlib/Algebra/Category/CommHopfAlgCat.lean,Mathlib/RingTheory/Bialgebra/MonoidAlgebra.lean |
2 |
2 |
['github-actions', 'mathlib-merge-conflicts'] |
nobody |
2-24714 2 days ago |
2-25444 2 days ago |
2-28393 2 days |
| 41903 |
felixpernegger author:felixpernegger |
chore: simplify proofs with `grind` |
These all come from the [weekly linting log](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/Weekly.20linting.20log) "Info messages count".
Note that that counter has two false positives which arise due to "all_goals". These are not included here obviously, but all others are (can undo some if they seriously hurt performance).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
tech debt |
10/40 |
Mathlib/Algebra/Polynomial/RuleOfSigns.lean,Mathlib/AlgebraicTopology/SimplexCategory/ToMkOne.lean,Mathlib/Analysis/Calculus/Taylor.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Analysis/SpecialFunctions/Stirling.lean,Mathlib/Combinatorics/Hypergraph/Basic.lean,Mathlib/Data/List/Defs.lean,Mathlib/LinearAlgebra/AffineSpace/Simplex/Basic.lean,Mathlib/MeasureTheory/MeasurableSpace/Defs.lean,Mathlib/MeasureTheory/Measure/Restrict.lean,Mathlib/MeasureTheory/SetSemiring.lean,Mathlib/NumberTheory/LucasLehmer.lean,Mathlib/Order/CountableSupClosed.lean,Mathlib/Probability/Moments/SubGaussian.lean,Mathlib/Probability/Process/LocalProperty.lean,Mathlib/RingTheory/MvPowerSeries/GaussNorm.lean,Mathlib/Topology/Order/Basic.lean |
18 |
11 |
['Vierkantor', 'felixpernegger', 'github-actions', 'leanprover-radar', 'vlad902'] |
nobody |
2-24300 2 days ago |
8-100 7 days ago |
7-86399 7 days |
| 41457 |
NoahW314 author:NoahW314 |
feat(Algebra/Group/Units/Basic): deduplicate lemmas by generalizing to `IsDedekindFiniteMonoid` |
Generalize a group of lemmas to `IsDedekindFiniteMonoid` which previously had versions for `CommMonoid`, `LeftCancelMonoid`, `RightCancelMonoid`, `CancelMonoid`, and `Ordinal`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
30/86 |
Mathlib/Algebra/AffineMonoid/Irreducible.lean,Mathlib/Algebra/Group/Units/Basic.lean,Mathlib/AlgebraicTopology/SimplicialSet/Horn.lean,Mathlib/Combinatorics/Enumerative/DyckWord.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Exponential.lean,scripts/nolints_prime_decls.txt |
7 |
4 |
['NoahW314', 'Vierkantor', 'github-actions', 'mathlib-merge-conflicts'] |
nobody |
2-22732 2 days ago |
2-22732 2 days ago |
18-63181 18 days |
| 42022 |
felixpernegger author:felixpernegger |
chore(Condensed): reduce imports |
Removes all redundant import in Mathlib/Condensed
Note: I originally also tried to privatize each import (which is why I made this PR in the first place), but surprisingly this never actually works. Additionally, Mathlib/Condensed in never imported in another subfolder, so there is probably no downside to merging this now
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-condensed |
0/19 |
Mathlib/Condensed/Basic.lean,Mathlib/Condensed/Discrete/Basic.lean,Mathlib/Condensed/Discrete/Module.lean,Mathlib/Condensed/Epi.lean,Mathlib/Condensed/Light/Basic.lean,Mathlib/Condensed/Light/EffectiveEpi.lean,Mathlib/Condensed/Light/InternallyProjective.lean,Mathlib/Condensed/Light/Module.lean,Mathlib/Condensed/Light/Monoidal.lean,Mathlib/Condensed/Light/Small.lean,Mathlib/Condensed/Module.lean,Mathlib/Condensed/Solid.lean,Mathlib/Condensed/TopComparison.lean |
13 |
9 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors'] |
nobody |
2-21071 2 days ago |
3-35847 3 days ago |
3-35739 3 days |
| 40587 |
dennj author:dennj |
feat(MeasureTheory): generalize rpow·exp and scalar-multiplication integrability lemmas |
Generalization PR:
- IntervalIntegrable.{smul_continuousOn, continuousOn_smul}, IntegrableOn.{continuousOn_smul, smul_continuousOn} (+ _of_subset forms), and the LocallyIntegrableOn analogues now need only IsBoundedSMul 𝕜 E instead of NormSMulClass 𝕜 E. (Every NormSMulClass is an IsBoundedSMul, so all existing uses still apply; over a NormedDivisionRing they coincide.) This works because these reduce to Integrable.bdd_smul/bdd_mul, which only need IsBoundedSMul, using IntegrableOn f s μ = Integrable f (μ.restrict s).
- integrableOn_rpow_mul_exp_neg_rpow / …_mul_rpow are generalized from 1 ≤ p to 0 < p (via u = xᵖ), matching the 0 < p of integral_rpow_mul_exp_neg_rpow. |
t-measure-probability
new-contributor
|
21/38 |
Mathlib/Analysis/SpecialFunctions/Gamma/Basic.lean,Mathlib/Analysis/SpecialFunctions/Gaussian/GaussianIntegral.lean,Mathlib/MeasureTheory/Function/LocallyIntegrable.lean,Mathlib/MeasureTheory/Integral/IntervalIntegral/Basic.lean |
4 |
7 |
['CoolRmal', 'RemyDegenne', 'dennj', 'github-actions'] |
CoolRmal assignee:CoolRmal |
2-20440 2 days ago |
42-44146 42 days ago |
42-44026 42 days |
| 41993 |
eneoli author:eneoli |
feat(Tactic/Linter/UnusedTactic): mark `isIgnoreTacticKind` and `addIgnoreTacticKind` as public |
Marks `isIgnoreTacticKind` and `addIgnoreTacticKind` in the `unusedTactic` linter as `public` definitions.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-linter
new-contributor
maintainer-merge
|
25/2 |
Mathlib/Tactic/Linter/UnusedTactic.lean,MathlibTest/Linter/UnusedTactic.lean |
2 |
5 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
2-20054 2 days ago |
4-82303 4 days ago |
4-82183 4 days |
| 41976 |
fpvandoorn author:fpvandoorn |
refactor(simps): centralize notation_class and initialize_simps_projections |
* Create a single file that declares all `notation_class` attributes and `initialize_simps_projections` calls for many structures in Core.
* Some of these notation classes were previously declared in `Tactic.Simps.Basic` or in other Mathlib files. The latter was problematic, because then you could have files that import `simps` and a Core structure, but not generate the right simp lemmas.
* Make sure that we import this file instead of the internal `Tactic.Simps.Basic` file throughout Mathlib. Not importing this file can cause `simps` to generate wrong lemmas.
* Also call `initialize_simps_projections` for (some) classes that are declared in Mathlib. (This is not super important, but ensures that these projections have to be only generated once, instead of in every file that imports it.)
* This was prompted by observing faulty behavior in #40653.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
large-import
t-meta
maintainer-merge
|
170/36 |
Mathlib.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Notation/Defs.lean,Mathlib/CategoryTheory/Monoidal/Functor/Types.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/Subtype.lean,Mathlib/Data/TwoPointing.lean,Mathlib/Logic/Equiv/Defs.lean,Mathlib/Order/Defs/LinearOrder.lean,Mathlib/Order/Notation.lean,Mathlib/Tactic.lean,Mathlib/Tactic/Common.lean,Mathlib/Tactic/ProdAssoc.lean,Mathlib/Tactic/ProxyType.lean,Mathlib/Tactic/Simps.lean,Mathlib/Tactic/Simps/Basic.lean,Mathlib/Tactic/Simps/NotationClass.lean,MathlibTest/Simps.lean,MathlibTest/TacticCheckInstancesSimps.lean |
19 |
3 |
['github-actions', 'joneugster'] |
nobody |
2-19475 2 days ago |
5-16757 5 days ago |
5-16909 5 days |
| 38198 |
JovanGerb author:JovanGerb |
chore(Data/Real/Basic): `no_expose` the private operations |
This PR puts `no_expose` on all of the operations on `Real` that are defined in terms of quotients. This is a step in the direction of not exposing the definiton of `Real`.
Note that I leave the `irreducible_def`s as is. This is because the `simpNF` linter does not participate in the module system, and it would time out otherwise. Additionally, downstream users may not be using the module system.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
11/31 |
Mathlib/Data/Real/Basic.lean,Mathlib/Topology/Algebra/Valued/NormedValued.lean |
2 |
18 |
['JovanGerb', 'Vierkantor', 'eric-wieser', 'github-actions', 'leanprover-radar', 'mathlib-merge-conflicts'] |
nobody |
2-17544 2 days ago |
38-66006 38 days ago |
98-64545 98 days |
| 41052 |
hawkrobe author:hawkrobe |
refactor(RingTheory/HopfAlgebra): relocate `ofSurjective` |
---
Cleanup after #39790, moves `HopfAlgebra.ofSurjective` to `HopfAlgebra/Convolution.lean` and extracts the convolution functoriality.
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
|
87/51 |
Mathlib/RingTheory/Bialgebra/Convolution.lean,Mathlib/RingTheory/Coalgebra/Convolution.lean,Mathlib/RingTheory/HopfAlgebra/Convolution.lean,Mathlib/RingTheory/HopfAlgebra/Quotient.lean |
4 |
7 |
['eric-wieser', 'github-actions', 'hawkrobe'] |
nobody |
2-16403 2 days ago |
2-16973 2 days ago |
30-17579 30 days |
| 41488 |
artie2000 author:artie2000 |
feat(LinearAlgebra/Dimension/Free): division version of tower law |
Split from #37959
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
maintainer-merge
label:t-algebra$ |
22/0 |
Mathlib/LinearAlgebra/Dimension/Free.lean |
1 |
10 |
['artie2000', 'github-actions', 'tb65536', 'themathqueen'] |
nobody |
2-10895 2 days ago |
5-2806 5 days ago |
5-30479 5 days |
| 40904 |
jiangf13 author:jiangf13 |
chore(Algebra/Group/WithOne): remove stale TODO |
The TODO claimed that `WithOne.coe_mul` and `WithZero.coe_mul` have inconsistent implicit parameters. Their current signatures are both of the form `{α} [Mul α] (a b : α)`, so the TODO is stale.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
0/4 |
Mathlib/Algebra/Group/WithOne/Defs.lean |
1 |
2 |
['Multramate', 'github-actions'] |
themathqueen assignee:themathqueen |
2-10645 2 days ago |
34-13036 34 days ago |
34-12916 34 days |
| 40165 |
SnirBroshi author:SnirBroshi |
feat(Algebra): `iSup` of substructures equals the set-union of all finite `iSup`s |
`(⨆ i, S i).carrier = ⋃ s : Finset ι, ⨆ i ∈ s, S i` for every substructure that has `coe_iSup_of_directed`:
- `Subsemigroup`
- `Submonoid`
- `Subgroup`
- `Subsemiring`
- `Subring`
- `Subfield`
- `Submodule`
- `Subalgebra`
- `NonUnitalStarSubalgebra`
- `NonUnitalSubalgebra`
- `NonUnitalSubring`
- `NonUnitalSubsemiring`
- `StarSubalgebra`
- `IntermediateField`
Co-authored-by: Albert Smith <10266947+ChiCubed@users.noreply.github.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
136/0 |
Mathlib.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/Algebra/Subalgebra/Directed.lean,Mathlib/Algebra/Field/Subfield/Basic.lean,Mathlib/Algebra/Group/Subgroup/Pointwise.lean,Mathlib/Algebra/Group/Submonoid/Pointwise.lean,Mathlib/Algebra/Group/Subsemigroup/Lemmas.lean,Mathlib/Algebra/Ring/Subring/Pointwise.lean,Mathlib/Algebra/Ring/Subsemiring/Pointwise.lean,Mathlib/Algebra/Star/NonUnitalSubalgebra.lean,Mathlib/Algebra/Star/Subalgebra.lean,Mathlib/FieldTheory/IntermediateField/Adjoin/Basic.lean,Mathlib/LinearAlgebra/Span/Basic.lean,Mathlib/RingTheory/NonUnitalSubring/Basic.lean,Mathlib/RingTheory/NonUnitalSubsemiring/Basic.lean |
15 |
2 |
['github-actions', 'plp127', 'themathqueen'] |
themathqueen assignee:themathqueen |
2-10505 2 days ago |
49-57643 49 days ago |
49-58179 49 days |
| 40663 |
Vierkantor author:Vierkantor |
feat: solve equalities of instances in `convert` |
This PR sets the `preTransparency` of `convert` to `.instances`, which means it will not run congruence on goals that already are equal at `.instances` transparency. In other words, `convert` (without exclamation) should leave no goals of the form `instA.toC = instB.toC`.
There are 387 (~ 8.5%) additional `convert!` calls in Mathlib that could become `convert` after this change, in addition to 2626 (~ 57,8%) where `convert` already succeeds at reducible transparency. I found no cases where `postTransparency := .instances` would be needed instead.
Full breakdown of stats, according to the test script below and passing the captured log messages to `sort | uniq -c`:
* 2626 `convert` would work
* 1513 `convert!` (i.e. `convert (postTransparency := .default)`) is required
* 387 `convert (preTransparency := .instances)` is required
* 16 cause an error in the test script
The test script consists of replacing the elaborator for `convert` with:
```lean
def sameGoals (gs₁ gs₂ : List MVarId) : MetaM Bool := do
if gs₁.length == gs₂.length then
try
(gs₁.zip gs₂).allM fun (g₁, g₂) => do
-- Check that they agree on the set of free variables, otherwise we get errors.
-- We assume the context in the `convert` case is a subset of the `convert!` case
-- since `convert!` can more agressively unfold and introduce more variables.
if !(← g₁.getDecl).lctx.isSubPrefixOf (← g₂.getDecl).lctx then return false
g₂.withContext <| withReducible <| isDefEq (← g₁.getType) (← g₂.getType)
catch _ => return false
else
return false
elab_rules : tactic
| `(tactic| convert $[!%$expensive]? $cfg $[←%$sym]? $term $[using $n]? $[with $ps?*]?) =>
withMainContext do
let actualConfig ← Convert.elabConfig expensive.isSome cfg
let cheapConfig ← Convert.elabConfig false cfg
let redConfig := { cheapConfig with
preTransparency := .reducible, postTransparency := .reducible }
let preInstConfig := { cheapConfig with
preTransparency := .instances, postTransparency := .reducible }
let postInstConfig := { cheapConfig with
postTransparency := .instances, preTransparency := .reducible }
let patterns := (ps?.getD #[]).toList
let expectedType ← mkFreshExprMVar (mkSort (← getLevel (← getMainTarget)))
let (e, gs) ← elabTermForConvert term expectedType
liftMetaTactic fun g ↦ do
-- Don't retain metavar assignments but do retain messages.
let msgs ← withoutModifyingState do
try
let actualGoals ← g.convert e sym.isSome (n.map (·.getNat)) actualConfig patterns
let redGoals ← g.convert e sym.isSome (n.map (·.getNat)) redConfig patterns
if ← sameGoals actualGoals redGoals then
logInfo m!"convert(reducible)"
else
let preInstGoals ← g.convert e sym.isSome (n.map (·.getNat)) preInstConfig patterns
if ← sameGoals actualGoals preInstGoals then
logInfo m!"convert(preInst)"
else
let postInstGoals ← g.convert e sym.isSome (n.map (·.getNat)) postInstConfig patterns
if ← sameGoals actualGoals postInstGoals then
logInfo m!"convert(postInst)"
else if expensive.isSome then
logInfo m!"convert(expensive)"
else
logInfo m!"convert(error)"
catch e =>
logInfo m!"convert(error {e.toMessageData})"
pure ()
Core.getMessageLog
Core.setMessageLog msgs
return (← g.convert e sym.isSome (n.map (·.getNat)) actualConfig patterns) ++ gs
```
---
Ideally we'd run a benchmark on this PR, or even better one that compares `preTransparency` and `postTransparency`. But we don't have a lot of calls to plain `convert` yet, since I'd want to wait for the migration until #38071 is merged.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-meta
maintainer-merge
|
46/6 |
Mathlib/Algebra/GCDMonoid/Basic.lean,Mathlib/Analysis/SpecialFunctions/Log/InvLog.lean,Mathlib/Geometry/Euclidean/Incenter.lean,Mathlib/NumberTheory/ClassNumber/AdmissibleCardPowDegree.lean,Mathlib/Tactic/Convert.lean,MathlibTest/Tactic/Convert/Instances.lean |
6 |
20 |
['JovanGerb', 'Vierkantor', 'github-actions', 'joneugster', 'leanprover-radar'] |
joneugster and thorimur assignee:joneugster assignee:thorimur |
2-8065 2 days ago |
3-5961 3 days ago |
31-40269 31 days |
| 41139 |
Deicyde author:Deicyde |
doc: add wikidata attributes |
This PR adds a batch of 20 `@[wikidata]` attributes.
Claude helped generate the list of crossrefs (by scanning Wikidata + Mathlib). Comments are generated by [crossref-report](https://github.com/jcommelin/mathlib-crossref-report) and Wikilean.
See https://wikilean.jackmccarthy.org/review?pr=41139 for reviewer UI.
---
|
LLM-generated |
39/4 |
Mathlib/Algebra/IsPrimePow.lean,Mathlib/Analysis/Complex/Circle.lean,Mathlib/Analysis/InnerProductSpace/Adjoint.lean,Mathlib/Analysis/Normed/Algebra/Spectrum.lean,Mathlib/Analysis/Normed/Operator/BoundedLinearMaps.lean,Mathlib/Combinatorics/Digraph/Basic.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Finite.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean,Mathlib/Data/Set/Operations.lean,Mathlib/Geometry/Manifold/Instances/Real.lean,Mathlib/LinearAlgebra/BilinearMap.lean,Mathlib/LinearAlgebra/Matrix/Charpoly/Basic.lean,Mathlib/LinearAlgebra/Matrix/Symmetric.lean,Mathlib/LinearAlgebra/RootSystem/WeylGroup.lean,Mathlib/MeasureTheory/Function/L1Space/Integrable.lean,Mathlib/MeasureTheory/OuterMeasure/AE.lean,Mathlib/NumberTheory/NumberField/Basic.lean,Mathlib/RingTheory/ClassGroup/Basic.lean,Mathlib/Topology/Defs/Basic.lean |
20 |
29 |
['Deicyde', 'SnirBroshi', 'faenuccio', 'github-actions'] |
nobody |
2-7499 2 days ago |
2-10619 2 days ago |
23-47615 23 days |
| 41487 |
Deicyde author:Deicyde |
feat: implement pi-base cross-reference attribute |
Adds a `@[pibase ID]` cross-reference attribute for canonical pi-base identifiers.
The parser accepts IDs of the form `P000001`, `S000023`, and `T000001`, and routes them to the corresponding `properties/`, `spaces/`, or `theorems/` page on `topology.pi-base.org`.
Tests cover docstring insertion, `#pibase_tags`, all three URL routes, and malformed IDs.
This PR was prepared with assistance from Codex. Based heavily on #41290 |
t-meta
LLM-generated
maintainer-merge
|
149/8 |
Mathlib/Tactic/CrossRefAttribute.lean,MathlibTest/CrossRefAttribute.lean |
2 |
20 |
['Deicyde', 'github-actions', 'joneugster', 'mathlib-merge-conflicts', 'thorimur', 'vlad902'] |
joneugster and thorimur assignee:joneugster assignee:thorimur |
1-85323 1 day ago |
1-86015 1 day ago |
11-29809 11 days |
| 40282 |
rosborn author:rosborn |
feat(Algebra/Group/Subgroup): add sup/iSup/biSup/sSup_characteristic |
The join of characteristic subgroups is characteristic.
---
These mirror the existing sup_normal/iSup_normal/biSup_normal/sSup_normal family in Subgroup/Pointwise.lean. I've left out the inf versions and extras like the characteristic closure until there's a use for them; they're easy to add later.
Discussed here: [Zulip](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Additional.20Group.20Theory.20Lemmas/with/600714666)
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
|
t-algebra
maintainer-merge
label:t-algebra$ |
40/0 |
Mathlib/Algebra/Group/Subgroup/Basic.lean |
1 |
21 |
['SnirBroshi', 'adomani', 'github-actions', 'mathlib-merge-conflicts', 'rosborn', 'themathqueen'] |
themathqueen assignee:themathqueen |
1-85135 1 day ago |
3-74270 3 days ago |
41-16773 41 days |
| 39371 |
fpvandoorn author:fpvandoorn |
feat: tag lemmas with compactness and closedness |
---
- [x] depends on: #39370
[](https://gitpod.io/from-referrer/)
|
t-meta
t-topology
maintainer-merge
|
88/11 |
Mathlib/Topology/Basic.lean,Mathlib/Topology/Closure.lean,Mathlib/Topology/Compactness/Compact.lean,Mathlib/Topology/MetricSpace/ProperSpace.lean,Mathlib/Topology/Order/Compact.lean,Mathlib/Topology/Order/OrderClosed.lean,Mathlib/Topology/Separation/Basic.lean,Mathlib/Topology/Separation/Hausdorff.lean,MathlibTest/Compactness.lean |
9 |
4 |
['github-actions', 'joneugster', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
joneugster assignee:joneugster |
1-84375 1 day ago |
5-17313 5 days ago |
5-17194 5 days |
| 40827 |
FrankieNC author:FrankieNC |
feat(MeasureTheory): coercion of a linear combination in Lp |
Adds `Lp.coeFn_linearCombination`: for finitely supported coefficients `c : ι →₀ 𝕜` and a family `f : ι → Lp E p μ`, the coercion of `Finsupp.linearCombination 𝕜 f c` is almost everywhere equal to `∑ i ∈ c.support, c i • ⇑(f i)`. |
t-measure-probability
brownian
|
5/0 |
Mathlib/MeasureTheory/Function/LpSpace/Basic.lean |
1 |
7 |
['CoolRmal', 'EtienneC30', 'FrankieNC', 'github-actions', 'j-loreaux'] |
RemyDegenne assignee:RemyDegenne |
1-82641 1 day ago |
1-83518 1 day ago |
36-31831 36 days |
| 42069 |
plp127 author:plp127 |
feat: isomorphism of `AdjoinRoot (f.comp g)` |
Prove that adjoining a root of `f.comp g` (this is `f(g(x))`) is the same as adjoining a root of `f` first, and then adjoining a root of `g - root f`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
74/0 |
Mathlib/RingTheory/AdjoinRoot.lean |
1 |
1 |
['github-actions'] |
nobody |
1-82222 1 day ago |
1-83288 1 day ago |
1-84187 1 day |
| 41877 |
BoltonBailey author:BoltonBailey |
feat(Algebra/Order/Floor/Ring): `positivity` for `Int.fract` |
This PR adds a positivity extension for `Int.fract`, which is always nonnegative.
I used Claude Code to prepare this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
LLM-generated
t-meta
maintainer-merge
label:t-algebra$ |
16/0 |
Mathlib/Algebra/Order/Floor/Ring.lean,MathlibTest/positivity.lean |
2 |
2 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
1-81034 1 day ago |
8-67741 8 days ago |
8-68664 8 days |
| 42070 |
felixpernegger author:felixpernegger |
chore: order imports of leaf files |
This PR orders imports of (almost) all leaf files to the standard
public import A
public import C
import B
import D
format. Excludes 18 files where `import all` or `public meta import` appears since we dont have a fixed convention for these imports yet.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
492/492 |
Mathlib/Algebra/Algebra/Subalgebra/Matrix.lean,Mathlib/Algebra/Azumaya/Basic.lean,Mathlib/Algebra/Category/ModuleCat/Differentials/Presheaf.lean,Mathlib/Algebra/Category/ModuleCat/ExteriorPower.lean,Mathlib/Algebra/Category/ModuleCat/Pseudofunctor.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/PullbackFree.lean,Mathlib/Algebra/Category/MonCat/Adjunctions.lean,Mathlib/Algebra/Category/MonCat/Colimits.lean,Mathlib/Algebra/Category/Ring/Topology.lean,Mathlib/Algebra/Category/Ring/Under/Property.lean,Mathlib/Algebra/DirectSum/Idempotents.lean,Mathlib/Algebra/FreeMonoid/FreeSemigroup.lean,Mathlib/Algebra/Group/Action/Equidecomp.lean,Mathlib/Algebra/Group/Pointwise/Finset/Density.lean,Mathlib/Algebra/Group/Pointwise/Finset/Interval.lean,Mathlib/Algebra/GroupWithZero/Action/Pointwise/Finset.lean,Mathlib/Algebra/GroupWithZero/Submonoid/CancelMulZero.lean,Mathlib/Algebra/HierarchyDesign.lean,Mathlib/Algebra/Homology/GrothendieckAbelian.lean,Mathlib/Algebra/Lie/Classical.lean,Mathlib/Algebra/Lie/DirectSum.lean,Mathlib/Algebra/Module/GradedModule.lean,Mathlib/Algebra/Module/PointwisePi.lean,Mathlib/Algebra/Module/Presentation/Differentials.lean,Mathlib/Algebra/Module/Presentation/Finite.lean,Mathlib/Algebra/Module/Presentation/RestrictScalars.lean,Mathlib/Algebra/Module/Torsion/PrimaryComponent.lean,Mathlib/Algebra/MvPolynomial/SchwartzZippel.lean,Mathlib/Algebra/NoZeroSMulDivisors/Pi.lean,Mathlib/Algebra/Order/Group/Bounds.lean,Mathlib/Algebra/Order/GroupWithZero/Lex.lean,Mathlib/Algebra/Order/Interval/Basic.lean,Mathlib/Algebra/Order/SuccPred/TypeTags.lean,Mathlib/Algebra/Polynomial/SpecificDegree.lean,Mathlib/Algebra/Ring/Ext.lean,Mathlib/Algebra/Ring/Pointwise/Finset.lean,Mathlib/Algebra/Ring/Subgroup.lean,Mathlib/Algebra/SkewMonoidAlgebra/Lift.lean,Mathlib/Algebra/Star/CentroidHom.lean,Mathlib/Algebra/Star/Free.lean,Mathlib/Algebra/Tropical/BigOperators.lean,Mathlib/AlgebraicGeometry/AffineTransitionLimit.lean,Mathlib/AlgebraicGeometry/AlgebraicCycle/Basic.lean,Mathlib/AlgebraicGeometry/Group/Smooth.lean,Mathlib/AlgebraicGeometry/Morphisms/FlatRank.lean,Mathlib/AlgebraicGeometry/Sites/Representability.lean,Mathlib/AlgebraicTopology/ModelCategory/JoyalTrick.lean,Mathlib/AlgebraicTopology/ModelCategory/Over.lean,Mathlib/AlgebraicTopology/Quasicategory/StrictBicategory.lean,Mathlib/AlgebraicTopology/SimplicialSet/Homology/Nondegenerate.lean,Mathlib/AlgebraicTopology/SimplicialSet/NonsingularColimit.lean,Mathlib/Analysis/Asymptotics/Completion.lean,Mathlib/Analysis/CStarAlgebra/CompletelyPositiveMap.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Note.lean,Mathlib/Analysis/CStarAlgebra/Multiplier.lean,Mathlib/Analysis/Calculus/DerivativeTest.lean,Mathlib/Analysis/Calculus/Gradient/Basic.lean,Mathlib/Analysis/Calculus/ImplicitFunction/Bivariate.lean,Mathlib/Analysis/Calculus/LineDeriv/QuadraticMap.lean,Mathlib/Analysis/Calculus/LocalExtr/LineDeriv.lean,Mathlib/Analysis/Calculus/LocalExtr/Polynomial.lean,Mathlib/Analysis/Calculus/Rademacher.lean,Mathlib/Analysis/Calculus/TangentCone/ProperSpace.lean,Mathlib/Analysis/Calculus/TangentCone/Seq.lean,Mathlib/Analysis/Calculus/TaylorIntegral.lean,Mathlib/Analysis/Complex/Hadamard.lean,Mathlib/Analysis/Complex/Harmonic/Liouville.lean,Mathlib/Analysis/Complex/Tietze.lean,Mathlib/Analysis/Complex/UpperHalfPlane/FixedPoints.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Measure.lean,Mathlib/Analysis/ConstantSpeed.lean,Mathlib/Analysis/Convex/AmpleSet.lean,Mathlib/Analysis/Convex/Birkhoff.lean,Mathlib/Analysis/Convex/Extrema.lean,Mathlib/Analysis/Convex/SimplicialComplex/AffineIndependentUnion.lean,Mathlib/Analysis/Distribution/Support.lean,Mathlib/Analysis/InnerProductSpace/JointEigenspace.lean,Mathlib/Analysis/InnerProductSpace/OfNorm.lean,Mathlib/Analysis/InnerProductSpace/StarOrder.lean,Mathlib/Analysis/LocallyConvex/Montel.lean,Mathlib/Analysis/LocallyConvex/PointwiseConvergence.lean,Mathlib/Analysis/Normed/Affine/ContinuousAffineMap.lean,Mathlib/Analysis/Normed/Affine/MazurUlam.lean,Mathlib/Analysis/Normed/Algebra/MatrixExponential.lean,Mathlib/Analysis/Normed/Algebra/QuaternionExponential.lean,Mathlib/Analysis/Normed/Group/SemiNormedGrp/Completion.lean,Mathlib/Analysis/Normed/Group/SemiNormedGrp/Kernels.lean,Mathlib/Analysis/Normed/Module/ContinuousInverse.lean,Mathlib/Analysis/Normed/Operator/Perturbation/StrictByFinite.lean,Mathlib/Analysis/ODE/Transform.lean,Mathlib/Analysis/Real/Pi/Irrational.lean,Mathlib/Analysis/SpecialFunctions/ArithmeticGeometricMean.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean,Mathlib/Analysis/SpecialFunctions/CompareExp.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/ExpLog/Order.lean,Mathlib/Analysis/SpecialFunctions/Log/Monotone.lean,Mathlib/Analysis/SpecialFunctions/Pochhammer.lean,Mathlib/Analysis/SpecialFunctions/Pow/Integral.lean,Mathlib/Analysis/SpecialFunctions/Pow/NthRootLemmas.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/ChebyshevGauss.lean |
368 |
6 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors'] |
nobody |
1-80842 1 day ago |
1-81102 1 day ago |
1-81014 1 day |
| 41389 |
felixpernegger author:felixpernegger |
chore: reduce `import all` |
Removes `import all` whenever possible. I also tried to "downgrade" by changing to `import` from `import all`, but that never made a difference. Excludes MathlibTest.
For a related PR, see #41222.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
0/7 |
Mathlib/Control/Monad/Cont.lean,Mathlib/Data/Fintype/Parity.lean,Mathlib/Data/Int/Bitwise.lean,Mathlib/Lean/Meta/RefinedDiscrTree/Encode.lean,Mathlib/Tactic/GCongr/Core.lean,Mathlib/Tactic/PNatToNat.lean |
6 |
9 |
['felixpernegger', 'github-actions', 'grunweg', 'leanprover-radar'] |
nobody |
1-77714 1 day ago |
21-4419 21 days ago |
21-4299 21 days |
| 41936 |
homeowmorphism author:homeowmorphism |
feat(Group Theory/Presentation): define group presentations |
`Group.Presentation` packages a chosen presentation of a given group `G`: a generating family together with relators (words `r`, each read as `r = 1`) whose generated normal subgroup is exactly the kernel of `FreeGroup.lift val : FreeGroup α →* G`. This the complementary to `PresentedGroup rels`, which constructs the group presented by a set of generators and relations.
---
PR #33233 by @jazzits previously was made to implement this feature but I am making a new PR due to inactivity. I have credited the original author.
Claude Fable assisted heavily in the making on this API, but I have done my best to review and steer it before putting this out.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
LLM-generated
|
181/0 |
Mathlib.lean,Mathlib/GroupTheory/Presentation.lean,docs/references.bib |
3 |
25 |
['github-actions', 'homeowmorphism', 'kbuzzard', 'mathlib-bors', 'tb65536'] |
tb65536 assignee:tb65536 |
1-73462 1 day ago |
6-6551 6 days ago |
6-9789 6 days |
| 41896 |
felixpernegger author:felixpernegger |
chore: replace `simp_all` with `simp` whenever possible |
Replaces `simp_all (only)` with `simp (only)` whenever possible. About 5% of total `simp_all` occurences. Excludes MathlibTest.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
102/106 |
Archive/Arithcc.lean,Archive/Examples/Eisenstein.lean,Archive/Imo/Imo2024Q3.lean,Mathlib/Algebra/BigOperators/Intervals.lean,Mathlib/Algebra/Category/Grp/ForgetCorepresentable.lean,Mathlib/Algebra/GroupWithZero/ProdHom.lean,Mathlib/Algebra/Homology/SpectralObject/HasSpectralSequence.lean,Mathlib/Algebra/Module/Torsion/PrimaryComponent.lean,Mathlib/Algebra/MvPolynomial/Basic.lean,Mathlib/Algebra/Polynomial/Basic.lean,Mathlib/Algebra/Polynomial/Expand.lean,Mathlib/AlgebraicGeometry/EllipticCurve/Reduction.lean,Mathlib/Analysis/Analytic/Binomial.lean,Mathlib/Analysis/Complex/Basic.lean,Mathlib/Analysis/Complex/JensenFormula.lean,Mathlib/Analysis/Convex/MetricSpace.lean,Mathlib/Analysis/Meromorphic/Basic.lean,Mathlib/Analysis/Meromorphic/Divisor.lean,Mathlib/Analysis/Meromorphic/FactorizedRational.lean,Mathlib/Analysis/Polynomial/Fourier.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean,Mathlib/Analysis/SpecialFunctions/Integrals/PosLogEqCircleAverage.lean,Mathlib/Analysis/SpecialFunctions/Log/PosLog.lean,Mathlib/CategoryTheory/Action/Basic.lean,Mathlib/CategoryTheory/Functor/TypeValuedFlat.lean,Mathlib/CategoryTheory/Topos/Sheaf.lean,Mathlib/Combinatorics/Quiver/Path/Vertices.lean,Mathlib/Combinatorics/SimpleGraph/Clique.lean,Mathlib/Combinatorics/SimpleGraph/Connectivity/Subgraph.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Data/List/Nodup.lean,Mathlib/Data/List/PeriodicityLemma.lean,Mathlib/Data/List/ProdSigma.lean,Mathlib/Data/List/Sigma.lean,Mathlib/Data/Nat/Digits/Lemmas.lean,Mathlib/Data/PEquiv.lean,Mathlib/Data/PNat/Xgcd.lean,Mathlib/Data/Set/Image.lean,Mathlib/Data/Sym/Sym2.lean,Mathlib/Data/TypeVec.lean,Mathlib/Data/Vector/Basic.lean,Mathlib/Data/ZMod/Basic.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/GroupTheory/PushoutI.lean,Mathlib/LinearAlgebra/Basis/Exact.lean,Mathlib/LinearAlgebra/Finsupp/Pi.lean,Mathlib/MeasureTheory/Constructions/Polish/StronglyMeasurable.lean,Mathlib/MeasureTheory/Function/LpSeminorm/Basic.lean,Mathlib/MeasureTheory/Measure/CharacteristicFunction/TaylorExpansion.lean,Mathlib/MeasureTheory/Measure/PreVariation.lean,Mathlib/NumberTheory/Height/MvPolynomial.lean,Mathlib/NumberTheory/ModularForms/EisensteinSeries/Defs.lean,Mathlib/NumberTheory/Padics/PadicNumbers.lean,Mathlib/NumberTheory/RatFunc/Ostrowski.lean,Mathlib/Order/ScottContinuity/Prod.lean,Mathlib/Order/SetDissipate.lean,Mathlib/Order/SuccPred/Basic.lean,Mathlib/Order/WithBot.lean,Mathlib/Probability/Kernel/Deterministic.lean,Mathlib/Probability/Kernel/Representation.lean,Mathlib/RepresentationTheory/Homological/TateCohomology/Basic.lean,Mathlib/RepresentationTheory/Tannaka.lean,Mathlib/RingTheory/Adjoin/Polynomial/Bivariate.lean,Mathlib/RingTheory/Binomial.lean,Mathlib/RingTheory/DiscreteValuationRing/Basic.lean,Mathlib/RingTheory/HahnSeries/Basic.lean,Mathlib/RingTheory/HahnSeries/Multiplication.lean,Mathlib/RingTheory/HahnSeries/Summable.lean,Mathlib/RingTheory/Multiplicity.lean,Mathlib/RingTheory/Nilpotent/Exp.lean,Mathlib/RingTheory/OrderOfVanishing/Basic.lean,Mathlib/RingTheory/OrderOfVanishing/Noetherian.lean,Mathlib/RingTheory/PowerSeries/Schroder.lean,Mathlib/RingTheory/Valuation/Basic.lean,Mathlib/RingTheory/Valuation/Discrete/Basic.lean,Mathlib/RingTheory/Valuation/IsTrivialOn.lean,Mathlib/RingTheory/Valuation/ValuativeRel/Basic.lean,Mathlib/SetTheory/Lists.lean,Mathlib/Topology/LocallyFinsupp.lean,Mathlib/Topology/MetricSpace/Bounded.lean |
80 |
24 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'themathqueen', 'vlad902'] |
nobody |
1-67809 1 day ago |
7-81368 7 days ago |
8-2741 8 days |
| 38369 |
quantumsnow author:quantumsnow |
feat(AlgebraicTopology): Eilenberg Steenrod axioms |
This introduces the Eilenberg-Steenrod axioms for a homology theory.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36621
- [x] depends on: #39236
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-algebraic-topology
large-import
|
299/7 |
Mathlib/AlgebraicTopology/EilenbergSteenrod.lean,Mathlib/Topology/Category/TopPair.lean |
2 |
73 |
['chrisflav', 'dagurtomas', 'github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'quantumsnow'] |
robin-carlier assignee:robin-carlier |
1-67150 1 day ago |
37-21650 37 days ago |
52-63342 52 days |
| 38664 |
joelriou author:joelriou |
feat(AlgebraicTopology/SimplicialSet): more API for `SSet.op` |
---
- [x] depends on: #38662
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology |
119/0 |
Mathlib/AlgebraicTopology/SimplicialSet/KanComplex/MulStruct.lean,Mathlib/AlgebraicTopology/SimplicialSet/Op.lean,Mathlib/AlgebraicTopology/SimplicialSet/StdSimplex.lean |
3 |
8 |
['github-actions', 'joelriou', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
dagurtomas assignee:dagurtomas |
1-67149 1 day ago |
31-27237 31 days ago |
31-27118 31 days |
| 38965 |
joelriou author:joelriou |
feat(AlgebraicTopology/SimplicialSet/Homology): extension of scalars |
If `X` is a simplicial set, `R₁ →+* R₂` is a morphism of commutative rings, and `M₁` is a `R₁`-module, then the chain complex of `R₂`-modules of `X` with coefficients in `R₂ ⊗[R₁] M₁` identifies to the extensions of scalars of the chain complex of `R₁`-modules of `X` with coefficients in `M₁`. In this file, we obtain a formulation of this result where the extension of scalars functor `ModuleCat R₁ ⥤ ModuleCat R₂` is replaced by an arbitrary functor `F : C ⥤ D` which commutes with coproducts.
(As `SimplicialObject` is now an `abbrev` for a category of functors, `SimplicialObject.whiskering` is also made an abbrev here.)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-topology |
148/34 |
Mathlib.lean,Mathlib/Algebra/Homology/HomologicalComplex.lean,Mathlib/AlgebraicTopology/AlternatingFaceMapComplex.lean,Mathlib/AlgebraicTopology/SimplicialObject/Basic.lean,Mathlib/AlgebraicTopology/SimplicialSet/Homology/Basic.lean,Mathlib/AlgebraicTopology/SimplicialSet/Homology/MapHomologicalComplex.lean,Mathlib/AlgebraicTopology/SimplicialSet/Homology/Nondegenerate.lean,Mathlib/AlgebraicTopology/SingularHomology/Basic.lean,Mathlib/CategoryTheory/Limits/Preserves/SigmaConst.lean,Mathlib/CategoryTheory/Limits/Shapes/Products.lean |
10 |
10 |
['dagurtomas', 'github-actions', 'joelriou', 'mathlib-merge-conflicts', 'robin-carlier'] |
dagurtomas assignee:dagurtomas |
1-67148 1 day ago |
24-19818 24 days ago |
33-54263 33 days |
| 39868 |
JuanCoRo author:JuanCoRo |
feat(Algebra/Polynomial): linearity of `divByMonic` and adjacent results |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This PR adds the `R`-linearity of the monic polynomial division map `_ /ₘ q`. It also adds adjacent results that stem from this work.
#### Refactors:
- Reuses the proofs from `add_modByMonic` and `smul_modByMonic` to generalize these results to `add_div_modByMonic` and `smul_div_modByMonic` respectively.
- Replaces the proofs of `add_modByMonic` and `smul_modByMonic` as specializations of the more general theorems `add_div_modByMonic` and `smul_div_modByMonic` respectively.
#### Additions:
- Adds the necessary results for `_ /ₘ q` linearity:
- `add_divByMonic : (p₁ + p₂) /ₘ q = p₁ /ₘ q + p₂ /ₘ q`
- `smul_divByMonic : c • p /ₘ q = c • (p /ₘ q)`
- Adds `_ /ₘ q` as an `R`-linear map:
- `divByMonicHom`: definition of `_ /ₘ q` as a linear map
- `mem_ker_divByMonic`: kernel characterization for `_ /ₘ q`.
- In `Div.lean` adds dual results for `/ₘ` that were already present for `%ₘ`
- `neg_divByMonic : (-p) /ₘ q = -(p /ₘ q)`
- `sub_divByMonic : (p₁ - p₂) /ₘ q = p₁ /ₘ q - p₂ /ₘ q`
- `mul_divByMonic_assoc (hd : q ∣ p₂) : (p₁ * p₂) /ₘ q = p₁ * (p₂ /ₘ q)`
While `mul_divByMonic_assoc` is not exactly the dual of `mul_modByMonic`, I thought it wouldn't hurt to add it.
[](https://gitpod.io/from-referrer/) |
new-contributor
t-algebra
label:t-algebra$ |
54/17 |
Mathlib/Algebra/Polynomial/Div.lean,Mathlib/Algebra/Polynomial/RingDivision.lean |
2 |
8 |
['JuanCoRo', 'github-actions', 'wwylele'] |
alreadydone assignee:alreadydone |
1-67147 1 day ago |
58-29507 58 days ago |
58-29466 58 days |
| 40337 |
Robby955 author:Robby955 |
feat(Probability): add condExpKernel prefix support |
## Summary
This draft adds reusable conditional-kernel support for finite product measures and an explicit prefix/tail decomposition for `condExpKernel` on `Fin n -> Ω`.
The main new explicit statement is `ProbabilityTheory.condExpKernel_piPrefix_eq_dirac_prod_pi`: for a product probability measure, conditioning on the prefix-coordinate sigma-algebra gives the kernel that keeps the prefix fixed and samples the remaining coordinates independently from the corresponding tail product.
## Changes
- Add `MeasurableSpace.piPrefixRestrict` and define `MeasurableSpace.piPrefix` as the comap along that restriction map.
- Add prefix measurability helpers for the coordinate sub-sigma-algebra.
- Add `ProbabilityTheory.Kernel.piPrefixTailFromPrefix` and `ProbabilityTheory.Kernel.piPrefixTail` for the explicit prefix-fixed/tail-product kernel.
- Add `ProbabilityTheory.condExpKernel_piPrefix_eq_dirac_prod_pi`, the explicit a.e. kernel equality for product probability measures.
- Keep `ProbabilityTheory.condExpKernel_piPrefix_ae_eq`, the finite-product prefix-coordinate support theorem.
- Extend `MathlibTest/CondExpKernelPiPrefix.lean` with an elaboration check for the explicit kernel equality.
## Verification
Local:
- `lake env lean Mathlib/Probability/Kernel/Condexp.lean`
- `lake env lean MathlibTest/CondExpKernelPiPrefix.lean`
- `lake build Mathlib.Probability.Kernel.Condexp`
- `lake exe runLinter --trace Mathlib.Probability.Kernel.Condexp`
- `#print axioms ProbabilityTheory.condExpKernel_piPrefix_eq_dirac_prod_pi`
- `#print axioms ProbabilityTheory.condExpKernel_piPrefix_ae_eq`
- `git diff --check`
`lake -Kthreads=1 test` was run locally, but this machine hit an OS file-table exhaustion error near the end of `MathlibTest` targets. The GitHub fork CI completed the full build, `test mathlib`, lint, style, cache upload, and post-build checks successfully on the PR head.
Axiom checks report only `[propext, Classical.choice, Quot.sound]` for the two public prefix theorems above.
## Risk / Rollback
No migrations, dependency changes, security-sensitive behavior, or user-facing runtime behavior. Roll back by reverting the prefix-kernel additions in `Mathlib/Probability/Kernel/Condexp.lean` and the corresponding `MathlibTest` checks.
## Disclaimers:
PR and post written by myself, Claude Code and whispr are used in coding and formatting. Claude Code also was used to do a review of the repo. |
t-measure-probability
new-contributor
LLM-generated
|
343/1 |
Mathlib/Probability/Kernel/Condexp.lean,MathlibTest/CondExpKernelPiPrefix.lean |
2 |
3 |
['felixpernegger', 'github-actions'] |
sgouezel assignee:sgouezel |
1-67146 1 day ago |
47-72031 47 days ago |
47-71911 47 days |
| 40394 |
mathlib-splicebot author:mathlib-splicebot |
chore(MeasureTheory/Measure/Haar/InnerProductSpace: remove an `erw` |
Extracted from #40348. |
t-measure-probability
tech debt
|
7/6 |
Mathlib/MeasureTheory/Measure/Haar/InnerProductSpace.lean |
1 |
4 |
['felixpernegger', 'github-actions'] |
kex-y assignee:kex-y |
1-67145 1 day ago |
47-36556 47 days ago |
47-36436 47 days |
| 40405 |
felixpernegger author:felixpernegger |
chore(MeasureTheory/Group): remove an erw |
Extracted from #40348
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
3/1 |
Mathlib/MeasureTheory/Group/GeometryOfNumbers.lean |
1 |
1 |
['Multramate', 'github-actions'] |
RemyDegenne assignee:RemyDegenne |
1-67144 1 day ago |
47-30567 47 days ago |
47-30447 47 days |
| 40851 |
SnirBroshi author:SnirBroshi |
feat(MeasureTheory/Integral/MeanInequalities): strict Hölder's inequality for Lebesgue integrals |
Prove an iff for the equality case of Hölder's inequality when both norms are finite and non-zero.
---
For both the norm 1 theorems and the finite non-zero theorems I extracted an intermediate lemma to reduce duplication between the inequality and equality cases.
It looks to me like `funMulInvSnorm` is intended to be private, so I made new theorems about it private.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
93/38 |
Mathlib/MeasureTheory/Integral/Lebesgue/Markov.lean,Mathlib/MeasureTheory/Integral/MeanInequalities.lean |
2 |
1 |
['github-actions'] |
kex-y assignee:kex-y |
1-67144 1 day ago |
36-4395 36 days ago |
36-4275 36 days |
| 41198 |
Raph-DG author:Raph-DG |
feat(AlgebraicGeometry): degree of a zero-cycle |
In this PR, we define the degree of a zero-cycle as in https://stacks.math.columbia.edu/tag/0AZ0
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebraic-geometry
large-import
|
107/2 |
Mathlib/AlgebraicGeometry/AlgebraicCycle/Basic.lean,Mathlib/AlgebraicGeometry/ResidueField.lean,Mathlib/Topology/LocallyFinsupp.lean |
3 |
13 |
['Raph-DG', 'github-actions', 'joelriou'] |
dagurtomas assignee:dagurtomas |
1-67143 1 day ago |
19-40798 19 days ago |
22-24959 22 days |
| 41383 |
joelriou author:joelriou |
feat(Algebra/Category/ModuleCat): the category of sheaves of modules is Grothendieck abelian |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
128/5 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Generator.lean,Mathlib/AlgebraicGeometry/Modules/Sheaf.lean,Mathlib/AlgebraicGeometry/Modules/Tilde.lean,Mathlib/CategoryTheory/Abelian/GrothendieckAxioms/PresheafOfModules.lean,Mathlib/CategoryTheory/Abelian/GrothendieckAxioms/SheafOfModules.lean,Mathlib/CategoryTheory/Generator/Basic.lean |
7 |
1 |
['github-actions'] |
dagurtomas assignee:dagurtomas |
1-67142 1 day ago |
21-16897 21 days ago |
21-17448 21 days |
| 41428 |
chrisflav author:chrisflav |
feat(Algebra/Category/ModuleCat): submodules of sheaves of modules |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory
LLM-generated
|
148/0 |
Mathlib.lean,Mathlib/Algebra/Category/ModuleCat/Presheaf/Submodule.lean,Mathlib/Algebra/Category/ModuleCat/Sheaf/Submodule.lean,Mathlib/CategoryTheory/Sites/Whiskering.lean |
4 |
2 |
['chrisflav', 'github-actions'] |
dagurtomas assignee:dagurtomas |
1-67141 1 day ago |
19-77938 19 days ago |
19-77856 19 days |
| 41484 |
FernandoChu author:FernandoChu |
feat(CategoryTheory): kan extensions from isos |
This PR constructs lifts out of isomorphisms of 1-cells, and shows that being (abs) Kan is preserved by this. This is done for all four notions of left/right lifts/extensions.
This is needed for the oo-cosmos project.
----
**AI disclosure**. Claude was used in defining the API for the left extension case. After manually fixing its bad proofs/definitions/docstrings, Claude was later asked to replicate this for the other three cases, which I again finetuned. |
t-category-theory
LLM-generated
large-import
|
330/3 |
Mathlib/CategoryTheory/Bicategory/Extension.lean,Mathlib/CategoryTheory/Bicategory/Kan/IsKan.lean |
2 |
3 |
['FernandoChu', 'github-actions', 'grunweg'] |
dagurtomas assignee:dagurtomas |
1-67140 1 day ago |
18-38190 18 days ago |
18-38070 18 days |
| 41494 |
FordUniver author:FordUniver |
feat(Analysis/Convex): first-order convexity inequalities |
Adds first-order characterizations of convexity for differentiable functions in three forms — directional, Fréchet, and gradient — together with concave duals, strict variants, iff converses, and the first-order optimality corollaries `ConvexOn.isMinOn_of_fderiv_eq_zero` / `ConvexOn.isMinOn_of_gradient_eq_zero`. `Analysis.Convex.Deriv` picks up the 1D additive forms of the slope inequalities.
---
The motivation is the Baillon–Haddad theorem in the Lipschitz-smooth stack (#39574 and follow-ups), whose proof plays the gradient form of the first-order convexity inequality against the descent bound of a `K`-smooth function. `LineDeriv` carries the proof content via 1D line restriction (`ConvexOn.lineRestriction`); `FDeriv` and `Gradient` are restatements via `lineDeriv_eq_fderiv` and Riesz (`inner_gradient_left`) respectively. This inverts mathlib's usual FDeriv-as-foundation default because convex first-order inequalities are naturally 1D — they only need directional differentiability, and the FDeriv/gradient forms are strictly stronger restatements.
- [x] depends on: #39203
- [x] depends on: #39198
|
t-analysis |
503/0 |
Mathlib.lean,Mathlib/Analysis/Convex/Deriv.lean,Mathlib/Analysis/Convex/FDeriv.lean,Mathlib/Analysis/Convex/Gradient.lean,Mathlib/Analysis/Convex/LineDeriv.lean |
5 |
2 |
['github-actions', 'mathlib-dependent-issues'] |
j-loreaux assignee:j-loreaux |
1-67139 1 day ago |
18-19633 18 days ago |
18-19513 18 days |
| 41529 |
kebekus author:kebekus |
feat: Émile Borel's classic "Growth Lemma" |
Establish Émile Borel's classic **Growth Lemma**: if `S : ℝ → ℝ` is monotone on `Set.Ici a` and satisfies `1 ≤ S` there, then
`∀ᶠ r in volume.cofinite ⊓ atTop, S (r + (S r)⁻¹) ≤ 2 * S r`.
In other words: The inequality `S (r + (S r)⁻¹) ≤ 2 * S r` holds for all sufficiently large `r` outside an exceptional set `E` of finite Lebesgue measure. In Value Distribution Theory, this statement is central to the proof of the "Lemma on the Logarithmic Derivatives".
This material is used in [Project VD](https://github.com/kebekus/ProjectVD), formalizing Value Distribution Theory for meromorphic functions on the complex plane. Claude Code was used to create this PR.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
LLM-generated
|
141/0 |
Mathlib.lean,Mathlib/MeasureTheory/Function/BorelGrowth.lean,docs/references.bib |
3 |
1 |
['github-actions'] |
EtienneC30 assignee:EtienneC30 |
1-67138 1 day ago |
17-32620 17 days ago |
17-32669 17 days |
| 42052 |
vherva-senso author:vherva-senso |
feat(NumberTheory): conjugation symmetry of the completed Riemann zeta function |
This PR adds the conjugation-symmetry lemmas for Deligne's archimedean Gamma factor `Γ_ℝ` and for
the completed Riemann zeta function `Λ` / `Λ₀`, complementing the existing `riemannZeta_conj`.
## What is added
* `Complex.Gammaℝ_conj` (in `Mathlib/Analysis/SpecialFunctions/Gamma/Deligne.lean`):
```
lemma Gammaℝ_conj (s : ℂ) : Gammaℝ (conj s) = conj (Gammaℝ s)
```
* `completedRiemannZeta₀_conj` and `completedRiemannZeta_conj`
(in `Mathlib/NumberTheory/Harmonic/ZetaAsymp.lean`, next to the existing `riemannZeta_conj`):
```
@[simp] theorem completedRiemannZeta₀_conj (s : ℂ) :
completedRiemannZeta₀ (conj s) = conj (completedRiemannZeta₀ s)
@[simp] theorem completedRiemannZeta_conj (s : ℂ) :
completedRiemannZeta (conj s) = conj (completedRiemannZeta s)
```
## Why these are missing
Mathlib already has `Complex.Gamma_conj` (for `Complex.Gamma`), the Jacobi-theta conjugation
lemmas, and `riemannZeta_conj` (the un-completed zeta, added in `ZetaAsymp.lean`). But there was no
conjugation lemma for Deligne's `Γ_ℝ` factor, nor for the *completed* zeta `Λ = Γ_ℝ · ζ` or its
entire cousin `Λ₀`. These are basic reality/symmetry facts about `Λ` — for instance they give,
in one line, that `Λ` is real on the critical line `re s = 1/2` (combine with the functional
equation `completedRiemannZeta_one_sub`), which is a standard ingredient when locating zeros of `ζ`.
## Proof technique
* `Gammaℝ_conj`: unfold `Γ_ℝ(s) = π^(-s/2) · Γ(s/2)` and push conjugation through each factor,
using `Complex.Gamma_conj` for the Gamma factor and `Complex.cpow_conj` for the `π`-power (whose
hypothesis `(π : ℂ).arg ≠ π` holds since `π > 0`).
* `completedRiemannZeta₀_conj`: the identity principle. Both `conj ∘ Λ₀ ∘ conj` (analytic via
`differentiableAt_conj_conj_iff`) and `Λ₀` are entire, and they agree on the open half-plane
`1 < re s`: there `Λ = Γ_ℝ · ζ` (as `Γ_ℝ` is non-vanishing) and both factors satisfy conjugation
symmetry (`Gammaℝ_conj`, `riemannZeta_conj`), while the poles `1/s + 1/(1-s)` are conjugation
symmetric. `AnalyticOnNhd.eq_of_eventuallyEq` then propagates the identity to all of `ℂ`.
* `completedRiemannZeta_conj`: subtract the conjugation-symmetric poles `1/s`, `1/(1-s)` from
`completedRiemannZeta₀_conj` via `completedRiemannZeta_eq`.
## Notes
* No new imports are introduced; the lemmas sit in the files where the corresponding objects and
the neighbouring `riemannZeta_conj` already live.
* `Gammaℝ_conj` is left un-`@[simp]` to mirror `Complex.Gamma_conj`; the two completed-zeta lemmas
are tagged `@[simp]` to mirror the existing `@[simp] riemannZeta_conj`.
## Formalization use-case
These lemmas were extracted from a formalization that certifies the first non-trivial zero of `ζ`
on the critical line: reality of `Λ` on `re s = 1/2` (via `completedRiemannZeta_conj` and the
functional equation) reduces a sign-change / intermediate-value argument for the real-valued
`Λ(1/2 + it)` to two certified numerical signs. The conjugation lemmas themselves are of general
interest and independent of that application.
---
🤖 Generated with [Claude Code](https://claude.com/claude-code)
https://claude.ai/code/session_01TyynZSLYoSAaXyzUCTfahZ
|
new-contributor
t-number-theory
t-analysis
LLM-generated
|
58/0 |
Mathlib/Analysis/SpecialFunctions/Gamma/Deligne.lean,Mathlib/NumberTheory/Harmonic/ZetaAsymp.lean |
2 |
2 |
['github-actions'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
1-67137 1 day ago |
2-44225 2 days ago |
2-44105 2 days |
| 39870 |
YaelDillies author:YaelDillies |
feat(Data): interleaving lists |
Define interleaving of lists as a relation.
This will be used to define interleaving polynomials, which in turn are a central concept in the line of work that earned June Huh his 2022 Fields medal.
From RealRooted
---
Interleaving of lists as an operation was merged in https://github.com/leanprover-community/batteries/pull/1853.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-data |
137/0 |
Mathlib.lean,Mathlib/Data/List/Interleave.lean |
2 |
21 |
['YaelDillies', 'chenson2018', 'eric-wieser', 'github-actions', 'mathlib-merge-conflicts', 'ocfnash'] |
nobody |
1-66248 1 day ago |
23-16028 23 days ago |
60-70865 60 days |
| 41192 |
RemyDegenne author:RemyDegenne |
feat: `withDensity` of compositions of kernels and measures |
Co-authored-by: Paulo Rauber <pauloeduardorauber@gmail.com>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
LeanMachineLearning
t-measure-probability
|
128/18 |
Mathlib.lean,Mathlib/Probability/Kernel/CompProdEqIff.lean,Mathlib/Probability/Kernel/Composition/WithDensity.lean |
3 |
1 |
['github-actions'] |
nobody |
1-66246 1 day ago |
26-26379 26 days ago |
26-26259 26 days |
| 39239 |
alainchmt author:alainchmt |
feat(FieldTheory/Finite): irreducible polynomial divides X^q^n - X iff degree divides n |
---
Add the theorem saying that, for an irreducible polynomial `f` over a finite field `K`, the degree of `f` divides `n` if and only if `f` divides `X ^ (Nat.card K) ^ n - X`. Include auxiliary lemmas.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
34/0 |
Mathlib/FieldTheory/Finite/Extension.lean,Mathlib/FieldTheory/Minpoly/Field.lean |
2 |
2 |
['github-actions'] |
nobody |
1-66245 1 day ago |
75-34612 75 days ago |
75-34492 75 days |
| 38086 |
dagurtomas author:dagurtomas |
feat(CategoryTheory): composition of profunctors |
---
- [x] depends on: #38085
- [x] depends on: #38382
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
345/2 |
Mathlib.lean,Mathlib/CategoryTheory/Profunctor/Basic.lean,Mathlib/CategoryTheory/Profunctor/Comp.lean |
3 |
20 |
['adamtopaz', 'dagurtomas', 'github-actions', 'mathlib-dependent-issues', 'mathlib-splicebot', 'robin-carlier'] |
nobody |
1-66243 1 day ago |
23-33404 23 days ago |
70-82518 70 days |
| 39807 |
vihdzp author:vihdzp |
feat: universe-heterogeneous cardinal equality |
We introduce a predicate `LiftEq a b`, with notation `a =ₗ b`, which states that two cardinals (in different universes) are equal. This serves as a single canonical spelling for `lift.{v} a = lift.{u} b` and similar incantations.
Future PRs will introduce the analogous predicates for `<` and `≤`, and a notation typeclass so the notation can be reused for `Ordinal` and `OrderType`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-set-theory
tech debt
|
316/149 |
Mathlib/CategoryTheory/Abelian/GrothendieckCategory/EnoughInjectives.lean,Mathlib/FieldTheory/IsAlgClosed/Classification.lean,Mathlib/LinearAlgebra/Dimension/Basic.lean,Mathlib/LinearAlgebra/Dimension/Constructions.lean,Mathlib/LinearAlgebra/Dimension/Free.lean,Mathlib/LinearAlgebra/Dimension/FreeAndStrongRankCondition.lean,Mathlib/LinearAlgebra/Dimension/LinearMap.lean,Mathlib/LinearAlgebra/Dimension/StrongRankCondition.lean,Mathlib/ModelTheory/Basic.lean,Mathlib/ModelTheory/Satisfiability.lean,Mathlib/RingTheory/AlgebraicIndependent/Basic.lean,Mathlib/RingTheory/AlgebraicIndependent/RankAndCardinality.lean,Mathlib/RingTheory/AlgebraicIndependent/TranscendenceBasis.lean,Mathlib/RingTheory/LinearDisjoint.lean,Mathlib/RingTheory/Localization/Cardinality.lean,Mathlib/SetTheory/Cardinal/Aleph.lean,Mathlib/SetTheory/Cardinal/Arithmetic.lean,Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Cardinal/Defs.lean,Mathlib/SetTheory/Cardinal/ENat.lean,Mathlib/SetTheory/Cardinal/Order.lean,Mathlib/SetTheory/Cardinal/ToNat.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/ZFC/Cardinal.lean |
24 |
3 |
['acmepjz', 'github-actions', 'mathlib-merge-conflicts'] |
alreadydone assignee:alreadydone |
1-64473 1 day ago |
1-66518 1 day ago |
41-56622 41 days |
| 42075 |
Parcly-Taxel author:Parcly-Taxel |
chore: delete deprecated declarations/modules from January 2026 |
`Mathlib.Util.MemoFix` is directly removed since all deprecations in it are more than 6 months old.
----
The automated deprecation removal action is now broken because the branch for #40618 still exists. |
tech debt
file-removed
|
1/2758 |
Mathlib.lean,Mathlib/Algebra/Algebra/Basic.lean,Mathlib/Algebra/Algebra/Epi.lean,Mathlib/Algebra/Algebra/NonUnitalSubalgebra.lean,Mathlib/Algebra/BigOperators/Finprod.lean,Mathlib/Algebra/Category/ModuleCat/Semi.lean,Mathlib/Algebra/Category/Ring/Epi.lean,Mathlib/Algebra/Group/Basic.lean,Mathlib/Algebra/Group/Int/Defs.lean,Mathlib/Algebra/GroupWithZero/Action/Defs.lean,Mathlib/Algebra/GroupWithZero/Basic.lean,Mathlib/Algebra/GroupWithZero/Defs.lean,Mathlib/Algebra/GroupWithZero/Int.lean,Mathlib/Algebra/GroupWithZero/NonZeroDivisors.lean,Mathlib/Algebra/GroupWithZero/Regular.lean,Mathlib/Algebra/ModEq.lean,Mathlib/Algebra/Module/Hom.lean,Mathlib/Algebra/Module/LinearMap/End.lean,Mathlib/Algebra/NoZeroSMulDivisors/Prod.lean,Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Algebra/Polynomial/Degree/Definitions.lean,Mathlib/Algebra/Polynomial/Splits.lean,Mathlib/Algebra/Ring/Regular.lean,Mathlib/AlgebraicGeometry/Artinian.lean,Mathlib/AlgebraicGeometry/Cover/MorphismProperty.lean,Mathlib/AlgebraicGeometry/Morphisms/ClosedImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/FinitePresentation.lean,Mathlib/AlgebraicGeometry/Morphisms/FiniteType.lean,Mathlib/AlgebraicGeometry/Morphisms/Flat.lean,Mathlib/AlgebraicGeometry/Morphisms/FormallyUnramified.lean,Mathlib/AlgebraicGeometry/Morphisms/OpenImmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Preimmersion.lean,Mathlib/AlgebraicGeometry/Morphisms/Separated.lean,Mathlib/AlgebraicGeometry/Morphisms/SurjectiveOnStalks.lean,Mathlib/AlgebraicGeometry/Morphisms/UniversallyClosed.lean,Mathlib/AlgebraicGeometry/Morphisms/UniversallyOpen.lean,Mathlib/AlgebraicTopology/FundamentalGroupoid/SimplyConnected.lean,Mathlib/AlgebraicTopology/ModelCategory/CofibrantObjectHomotopy.lean,Mathlib/Analysis/Analytic/Composition.lean,Mathlib/Analysis/Asymptotics/AsymptoticEquivalent.lean,Mathlib/Analysis/Calculus/Deriv/Mul.lean,Mathlib/Analysis/Calculus/FDeriv/Add.lean,Mathlib/Analysis/Calculus/Implicit.lean,Mathlib/Analysis/Calculus/ImplicitContDiff.lean,Mathlib/Analysis/Calculus/TangentCone/Basic.lean,Mathlib/Analysis/Complex/IntegerCompl.lean,Mathlib/Analysis/Complex/Schwarz.lean,Mathlib/Analysis/Complex/TaylorSeries.lean,Mathlib/Analysis/Complex/UnitDisc/Basic.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Basic.lean,Mathlib/Analysis/Convex/Body.lean,Mathlib/Analysis/Distribution/FourierSchwartz.lean,Mathlib/Analysis/Distribution/SchwartzSpace.lean,Mathlib/Analysis/Distribution/SchwartzSpace/Fourier.lean,Mathlib/Analysis/Distribution/TemperedDistribution.lean,Mathlib/Analysis/Fourier/Notation.lean,Mathlib/Analysis/InnerProductSpace/Orthogonal.lean,Mathlib/Analysis/InnerProductSpace/PiL2.lean,Mathlib/Analysis/LocallyConvex/Barrelled.lean,Mathlib/Analysis/Matrix/Spectrum.lean,Mathlib/Analysis/Normed/Group/Basic.lean,Mathlib/Analysis/Normed/Group/Pointwise.lean,Mathlib/Analysis/Normed/Module/Ball/Pointwise.lean,Mathlib/Analysis/Normed/Order/Basic.lean,Mathlib/Analysis/Normed/Unbundled/SeminormFromConst.lean,Mathlib/Analysis/Polynomial/MahlerMeasure.lean,Mathlib/Analysis/Real/Hyperreal.lean,Mathlib/Analysis/SpecialFunctions/Complex/Log.lean,Mathlib/Analysis/SpecialFunctions/NonIntegrable.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Cotangent.lean,Mathlib/CategoryTheory/Adjunction/Opposites.lean,Mathlib/CategoryTheory/Category/Grpd.lean,Mathlib/CategoryTheory/Limits/Shapes/Products.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/CommSq.lean,Mathlib/CategoryTheory/Limits/Shapes/Pullback/Equifibered.lean,Mathlib/CategoryTheory/MorphismProperty/Basic.lean,Mathlib/CategoryTheory/Sites/IsSheafFor.lean,Mathlib/CategoryTheory/Triangulated/TStructure/Basic.lean,Mathlib/Combinatorics/SimpleGraph/AdjMatrix.lean,Mathlib/Combinatorics/SimpleGraph/Coloring/Vertex.lean,Mathlib/Combinatorics/SimpleGraph/VertexCover.lean,Mathlib/Computability/Primrec.lean,Mathlib/Computability/Primrec/Basic.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Data/Fintype/Prod.lean,Mathlib/Data/Int/ModEq.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/Flatten.lean,Mathlib/Data/List/GetD.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Option/Defs.lean,Mathlib/Data/Set/Card.lean,Mathlib/Data/SetLike/Basic.lean,Mathlib/Data/Tree/RBMap.lean,Mathlib/FieldTheory/Isaacs.lean,Mathlib/Geometry/Manifold/PartitionOfUnity.lean,Mathlib/Geometry/Manifold/Riemannian/Basic.lean,Mathlib/Lean/Expr.lean,Mathlib/Lean/Expr/ReplaceRec.lean,Mathlib/LinearAlgebra/AffineSpace/AffineSubspace/Basic.lean |
184 |
1 |
['github-actions'] |
nobody |
1-63961 1 day ago |
1-67025 1 day ago |
1-69991 1 day |
| 37751 |
JovanGerb author:JovanGerb |
chore(Order/Filter/IsBounded): use `to_dual` |
use `to_dual` for `Filter.IsBounded`
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #37747
[](https://gitpod.io/from-referrer/)
|
tech debt |
81/227 |
Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean,Mathlib/Order/Filter/IsBounded.lean |
2 |
4 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
1-62990 1 day ago |
1-65750 1 day ago |
40-67517 40 days |
| 40298 |
xroblot author:xroblot |
feat(Algebra/Algebra): reinterpret a RingEquiv as a ℕ/ℤ/ℚ-algebra isomorphism |
Adds the `RingEquiv` analogues of the `RingHom.to{Nat,Int,Rat}AlgHom` / `RingHom.equivRatAlgHom` constructions, over `ℕ`, `ℤ` and `ℚ`:
- `RingEquiv.toNatAlgEquiv`, `RingEquiv.toIntAlgEquiv`, `RingEquiv.toRatAlgEquiv`: a `RingEquiv` is canonically an ℕ-, ℤ- or ℚ-algebra isomorphism.
- `ringEquivEquivNatAlgEquiv`, `ringEquivEquivIntAlgEquiv`, `ringEquivEquivRatAlgEquiv`: the corresponding equivalences `(R ≃+* S) ≃ (R ≃ₐ[·] S)`.
:robot: This PR was extracted from the [SKW project](https://github.com/xroblot/SKW) by Claude. |
t-algebra
maintainer-merge
label:t-algebra$ |
111/14 |
Mathlib/Algebra/Algebra/Equiv.lean,Mathlib/Algebra/Algebra/Hom/Rat.lean |
2 |
56 |
['github-actions', 'plp127', 'themathqueen', 'xroblot'] |
themathqueen assignee:themathqueen |
1-61402 1 day ago |
3-43812 3 days ago |
45-68607 45 days |
| 42065 |
JX-Mo author:JX-Mo |
fix(CategoryTheory): correct docstring about preservation of epimorphisms |
Correct docstring about preservation of epimorphisms. |
t-category-theory
easy
new-contributor
|
1/1 |
Mathlib/CategoryTheory/Preadditive/Projective/Preserves.lean |
1 |
3 |
['JX-Mo', 'felixpernegger', 'github-actions'] |
nobody |
1-59031 1 day ago |
2-17190 2 days ago |
2-17070 2 days |
| 42077 |
themathqueen author:themathqueen |
chore(LinearAlgebra/PerfectPairing/Basic): generalize to `AddCommMonoid` |
There's no reason for `LinearEquiv.flip` to be restricted to `AddCommGroup` over `CommRing`, so we weaken it to `AddCommMonoid` over `CommSemiring`.
But, while we're here, I just weakened the whole file (excluding the Field section).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
7/5 |
Mathlib/LinearAlgebra/PerfectPairing/Basic.lean |
1 |
1 |
['github-actions'] |
nobody |
1-58406 1 day ago |
1-59009 1 day ago |
1-58907 1 day |
| 27493 |
themathqueen author:themathqueen |
feat(RingTheory): define Frobenius equations (`Coalgebra.IsFrobenius`) |
A coalgebra with an algebra structure `A` is said to be Frobenius when it satisfies the Frobenius equation:
`(id ⊗ mul) ∘ assoc ∘ (comul ⊗ id) = comul ∘ mul = (mul ⊗ id) ∘ assoc.symm ∘ (id ⊗ comul)`,
which in diagrams looks like
```
| | | |
| μ | | μ |
| / \ \ / / \ |
\ / | = δ ∘ μ = | \ /
δ | / \ | δ
| | | | | |
```
where `μ` stands for multiplication and `δ` for comultiplication.
It suffices to show that the left and right diagrams are equal, i.e.,
`(id ⊗ mul) ∘ assoc ∘ (comul ⊗ id) = (mul ⊗ id) ∘ assoc.symm ∘ (id ⊗ comul)`, so this is the only equality in the class.
Because of how long and complicated the names would be, we add abbreviations for the left and right equations, `IsFrobenius.left` and `IsFrobenius.right`. So the Frobenius equation is literally `left_eq_right : IsFrobenius.left = IsFrobenius.right`.
A Frobenius coalgebra is necessarily finite and projective. Also, the bilinear form `(LinearMap.mul R A).compr₂ counit` is nondegenerate and bijective.
A `Bialgebra R A` that is Frobenius must have `R` isomorphic to `A`.
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #27567
- [x] depends on: #27569
- [x] depends on: #32245
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
265/0 |
Mathlib.lean,Mathlib/RingTheory/Coalgebra/IsFrobenius.lean |
2 |
38 |
['JonBannon', 'Julian-Kuelshammer', 'YaelDillies', 'erdOne', 'github-actions', 'mathlib-dependent-issues', 'mathlib4-merge-conflict-bot', 'riccardobrasca', 'themathqueen', 'wwylele'] |
riccardobrasca assignee:riccardobrasca |
1-57371 1 day ago |
4-1102 4 days ago |
107-42999 107 days |
| 39703 |
YaelDillies author:YaelDillies |
chore: create a `Basic` top folder |
Move a select few folders from `Logic` to a new `Basic` folder.
The goal is to finally move the material misplaced in the `Data` and `Logic` folder and to clarify the various expectations of each folder. Ultimately:
* the `Basic` folder will be about basic predicates on types and basic mathematical types not fitting in any other folder;
* the `Data` folder will be about data structures, instead of the current mix of data structures and basic mathematical types not fitting in any other folder;
* the `Logic` folder will be about advanced logic results not fitting in either `ModelTheory` or `SetTheory`, instead of the current mix of basic predicates on types and advanced logic results.
Many more files (~1000) could be moved, so I will do it in several PRs. Not all files should move to `Basic`. Some files should go to `Algebra.Order` instead (eg `Data.Nat.Lattice`) and some should be straight out deprecated (eg `Data.Analysis`).
[Zulip discussion](https://leanprover.zulipchat.com/#narrow/channel/345428-mathlib-reviewers/topic/Basic.20folder/with/597151406)
---
This PR stems from discussions at the MI retreat 2026.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
file-removed
t-data
|
165/96 |
Counterexamples/Girard.lean,Mathlib.lean,Mathlib/Algebra/CharZero/Defs.lean,Mathlib/Algebra/Group/Irreducible/Defs.lean,Mathlib/Algebra/Group/Nat/Units.lean,Mathlib/Algebra/Group/Pi/Basic.lean,Mathlib/Algebra/Group/Units/Basic.lean,Mathlib/Algebra/Group/WithOne/Defs.lean,Mathlib/Algebra/GroupWithZero/Basic.lean,Mathlib/Algebra/GroupWithZero/Defs.lean,Mathlib/Algebra/Module/Presentation/Free.lean,Mathlib/Algebra/Module/Projective.lean,Mathlib/Algebra/NeZero.lean,Mathlib/Basic/Denumerable.lean,Mathlib/Basic/ExistsUnique.lean,Mathlib/Basic/IsEmpty.lean,Mathlib/Basic/IsEmpty/Basic.lean,Mathlib/Basic/IsEmpty/Defs.lean,Mathlib/Basic/Logic/Basic.lean,Mathlib/Basic/Logic/Lemmas.lean,Mathlib/Basic/Nonempty.lean,Mathlib/Basic/Nontrivial/Basic.lean,Mathlib/Basic/Nontrivial/Defs.lean,Mathlib/Basic/README.md,Mathlib/Basic/Unique.lean,Mathlib/Basic/UnivLE.lean,Mathlib/CategoryTheory/EssentiallySmall.lean,Mathlib/CategoryTheory/Limits/Types/Colimits.lean,Mathlib/CategoryTheory/Limits/Types/Limits.lean,Mathlib/CategoryTheory/UnivLE.lean,Mathlib/Combinatorics/Quiver/Path.lean,Mathlib/Computability/Primrec/Basic.lean,Mathlib/Data/Bool/Basic.lean,Mathlib/Data/FunLike/Basic.lean,Mathlib/Data/List/Basic.lean,Mathlib/Data/List/GetD.lean,Mathlib/Data/Nat/Basic.lean,Mathlib/Data/Nat/MaxPowDiv.lean,Mathlib/Data/Option/Basic.lean,Mathlib/Data/Quot.lean,Mathlib/Data/README.md,Mathlib/Data/Rat/Denumerable.lean,Mathlib/Data/TwoPointing.lean,Mathlib/Lean/Meta/CongrTheorems.lean,Mathlib/LinearAlgebra/Matrix/Defs.lean,Mathlib/Logic/Equiv/Defs.lean,Mathlib/Logic/Equiv/List.lean,Mathlib/Logic/Function/Basic.lean,Mathlib/Logic/README.md,Mathlib/Order/OrderIsoNat.lean,Mathlib/Order/RelClasses.lean,Mathlib/Order/WithBot.lean,Mathlib/RingTheory/Coprime/Basic.lean,Mathlib/SetTheory/Cardinal/Basic.lean,Mathlib/SetTheory/Cardinal/UnivLE.lean,Mathlib/SetTheory/ZFC/Rank.lean,Mathlib/Tactic/CancelDenoms/Core.lean,Mathlib/Tactic/CongrExclamation.lean,Mathlib/Tactic/ITauto.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean,Mathlib/Tactic/Nontriviality/Core.lean,Mathlib/Tactic/Push.lean,Mathlib/Tactic/Subsingleton.lean,Mathlib/Tactic/Tauto.lean,Mathlib/Testing/Plausible/Testable.lean,Mathlib/Topology/Order/UpperLowerSetTopology.lean,MathlibTest/Linter/PrivateModule/ImportOnly.lean,scripts/autolabel.lean,scripts/noshake.json |
69 |
40 |
['SnirBroshi', 'TwoFX', 'YaelDillies', 'github-actions', 'grunweg', 'j-loreaux', 'joneugster', 'mathlib-merge-conflicts', 'themathqueen'] |
nobody |
1-53805 1 day ago |
1-53848 1 day ago |
54-62927 54 days |
| 38200 |
Parcly-Taxel author:Parcly-Taxel |
feat: Turán numbers and their strict monotonicity |
`strictMonoOn_turanNumber` was initially proved by @Aristotle-Harmonic, then hand-polished.
Co-authored-by: Aristotle (Harmonic) <aristotle-harmonic@harmonic.fun> |
t-combinatorics
tech debt
maintainer-merge
|
45/20 |
Mathlib/Combinatorics/SimpleGraph/Extremal/Turan.lean |
1 |
9 |
['Parcly-Taxel', 'YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'tb65536'] |
nobody |
1-50579 1 day ago |
1-51215 1 day ago |
95-27000 95 days |
| 37685 |
vihdzp author:vihdzp |
feat: Fodor's lemma |
We define stationary sets and prove Fodor's lemma, following the proof at Wikipedia.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #39727
I'm surprised that this has a [Wikipedia article](https://en.wikipedia.org/wiki/Fodor%27s_lemma) but isn't listed in 1000.yaml. Is it just because the name has "lemma" instead of "theorem"?
[](https://gitpod.io/from-referrer/)
|
t-set-theory
t-order
large-import
maintainer-merge
|
70/3 |
Mathlib/SetTheory/Cardinal/Cofinality/Club.lean,Mathlib/SetTheory/Ordinal/Basic.lean |
2 |
16 |
['YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'staroperator', 'vihdzp'] |
nobody |
1-50526 1 day ago |
2-47686 2 days ago |
2-82624 2 days |
| 41898 |
marcinbugaj author:marcinbugaj |
feat(Analysis/Convex): majorization preorder and T-transform decomposition |
Define `Majorizes` (notation `≺`) on `Fin n → ℝ`, show it is a preorder, define single T-transforms (`TTransform`/`RelatedByTTransform`) and `discrepancy`, and prove `majorizes_iff_reflTransGen_relatedByTTransform`: `a ≺ b` iff the sorted `a` is reachable from the sorted `b` by a finite chain of T-transforms (both directions).
|
t-analysis
new-contributor
|
782/0 |
Mathlib.lean,Mathlib/Analysis/Convex/Majorization.lean,docs/references.bib |
3 |
7 |
['YaelDillies', 'github-actions', 'marcinbugaj'] |
nobody |
1-49556 1 day ago |
2-28038 2 days ago |
7-25405 7 days |
| 38227 |
vihdzp author:vihdzp |
chore(Algebra/Order/Monoid/Unbundled/Basic): golfing + formatting |
We make use of `variable`, fix some weird spacing, and golf many proofs.
The only breaking change is that `mul_lt_iff_lt_one_left'`/`add_lt_iff_neg_left` now takes an explicit argument, matching the theorems surrounding it.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
Not too fond of the `calc` tactic.
[](https://gitpod.io/from-referrer/)
|
t-algebra
t-order
maintainer-merge
label:t-algebra$ |
233/501 |
Mathlib/Algebra/Order/Archimedean/Real/Basic.lean,Mathlib/Algebra/Order/Monoid/Unbundled/Basic.lean |
2 |
9 |
['YaelDillies', 'github-actions', 'mathlib-merge-conflicts', 'vihdzp'] |
nobody |
1-49283 1 day ago |
2-1227 2 days ago |
27-7766 27 days |
| 38319 |
Zetetic-Dhruv author:Zetetic-Dhruv |
feat(Combinatorics/SetFamily): Assouad's dual VC bound |
Adds the Finset-level form of Assouad's 1983 dual VC bound: if a family
`𝒜 : Finset (Finset α)` has VC dimension at most `d`, then for any
ground set `X : Finset α` the dual family
`{𝒜.filter (· ∋ x) : x ∈ X}` has VC dimension at most `2 ^ (d + 1) - 1`.
New declarations (in `Finset` namespace):
- `dualFamily 𝒜 X`: for each `x ∈ X`, the subfamily `{A ∈ 𝒜 | x ∈ A}`
- `mem_dualFamily` (`@[simp]`): membership characterisation
- `exists_shatters_of_dualFamily_shatters`: Assouad's bitstring-coding lemma
- `vcDim_dualFamily_le`: the headline VC bound
Proof by Assouad's classical bitstring-coding argument. Sits on top of `Finset.shatterer` / `Finset.vcDim` from
`Mathlib.Combinatorics.SetFamily.Shatter`.
References:
- P. Assouad, Densite et dimension, Ann. Inst. Fourier 33(3) (1983), Thm 2.13
- J. Matousek, Lectures on Discrete Geometry, GTM 212, Springer, 2002, Section 10.3 Lemma 10.3.3
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-combinatorics
new-contributor
maintainer-merge
|
199/0 |
Mathlib.lean,Mathlib/Combinatorics/SetFamily/DualVC.lean,docs/references.bib |
3 |
44 |
['Shreyas4991', 'YaelDillies', 'Zetetic-Dhruv', 'github-actions'] |
b-mehta assignee:b-mehta |
1-48681 1 day ago |
77-78865 77 days ago |
94-39394 94 days |
| 40901 |
vihdzp author:vihdzp |
feat: zero-dimensional spaces |
We introduce an abbreviation `ZeroDimensionalSpace X = HasSmallInductiveDimensionLT 1`. We prove, in various forms, the characterization of these spaces as those that have a basis of clopen sets. We also generalize various results from profinite groups to zero-dimensional groups.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #40897
Moved from #37444.
[](https://gitpod.io/from-referrer/)
|
t-topology
large-import
|
125/61 |
Mathlib/Topology/Algebra/ClopenNhdofOne.lean,Mathlib/Topology/Separation/DisjointCover.lean,Mathlib/Topology/Separation/Profinite.lean,Mathlib/Topology/SmallInductiveDimension.lean |
4 |
3 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
1-48482 1 day ago |
2-44024 2 days ago |
2-44226 2 days |
| 41258 |
ungatz author:ungatz |
feat(Analysis/Fourier/FiniteAbelian): add the Donoho-Stark support uncertainty principle |
This adds the Donoho–Stark support uncertainty inequality for the unitary Fourier transform on a finite abelian group, plus the supporting Fourier-inversion machinery indexed by the Pontryagin dual `AddChar G ℂ`.
The headline:
> **Theorem `AddChar.donoho_stark`.** For nonzero `f : G → ℂ`,
> `Fintype.card G ≤ (support f).ncard * (support (fourierTransform f)).ncard`,
> where `fourierTransform f ψ = |G|^(-1/2) * ∑ g, conj (ψ g) * f g` ranges over `ψ : AddChar G ℂ`.
The proof is the elementary (L¹, L∞) duality argument that any harmonic-analysis textbook gives for the classical `ZMod N` case; no Parseval or Cauchy–Schwarz is needed. The finite-abelian generalisation is folklore (stated in Tao–Vu *Additive Combinatorics* and Terras *Fourier Analysis on Finite Groups*); I did not find it formalised in Mathlib or any other major library.
### Why this belongs in Mathlib
Mathlib already has the supporting infrastructure — character theory of finite abelian groups (`Mathlib.Algebra.Group.AddChar`), character orthogonality and Pontryagin duality (`Mathlib.Analysis.Fourier.FiniteAbelian.{Orthogonality, PontryaginDuality}`). The Donoho–Stark inequality is the canonical application of all three, and its absence is a real gap: I needed it for a downstream operator-uncertainty result (a diagonal-operator `rank * Pauli-support` bound on the finite Heisenberg group reduces to it) and ended up proving it from scratch. Beyond that use, it is a standard tool in compressed sensing on finite abelian groups, additive combinatorics, and discrete signal recovery (the 1989 paper has ~3500 citations).
### What's in this PR
A single new file, `Mathlib/Analysis/Fourier/FiniteAbelian/DonohoStark.lean`:
- `AddChar.fourierTransform` — the unitary (symmetric) Fourier transform indexed by `AddChar G ℂ`;
- `AddChar.fourier_inversion` — the inversion formula;
- `AddChar.norm_fourierTransform_le`, `AddChar.norm_le_sum_norm_fourierTransform` — the two `L∞ ≤ |G|^(-1/2) · L¹` triangle bounds;
- `AddChar.donoho_stark` — the support uncertainty inequality.
Design choices I expect questions on, and my defaults:
- **`ℂ` rather than `RCLike`**: matches the cited literature and the cleanest home of `AddChar.norm_apply`; happy to generalise if preferred.
- **`Set.ncard` for support sizes**: avoids needing `DecidableEq ℂ` in the statement.
- **A new sibling file** of `Orthogonality.lean` / `PontryaginDuality.lean` rather than a subsection: orthogonality is the tool, Donoho–Stark is the application; can inline if preferred.
Deliberately *not* included: the diagonal-operator `rank * Pauli-support ≥ 2^n` corollary from my workspace — the Pauli-word machinery has no natural home in `Analysis/Fourier` yet; happy to factor it into a follow-up if there is interest.
### AI usage disclosure
Per the [AI contribution policy](https://leanprover-community.github.io/contribute/index.html): the original Lean proof was generated by **Aristotle** (Harmonic AI's automated proof system) from a dispatch containing the statement and the (L¹, L∞) proof strategy, as part of my PhD research workspace. I audited the delivery line by line against Donoho–Stark 1989 (the dispatch also produced a kernel-checked counterexample to a tempting wrong variant — replacing rank by the count of distinct eigenvalues — which the 2×2 identity falsifies). The file here is my adaptation to Mathlib conventions and to current master (module system, `Set.ncard` statement, robust cast handling in the inversion proof), with final tactic-level repairs done with the assistance of Claude (Anthropic). I understand and can defend every line without AI assistance. Please add the `LLM-generated` label (I cannot set labels myself).
### Test plan
- [x] `lake build Mathlib.Analysis.Fourier.FiniteAbelian.DonohoStark` clean (0 errors, 0 warnings).
- [x] `#print axioms` on all five declarations: `[propext, Classical.choice, Quot.sound]`.
- [x] `lake exe lint-style` clean; all lines ≤ 100 chars.
- [x] `Mathlib.lean` updated in alphabetical position.
- [x] Imports minimal (`PontryaginDuality` + `RCLike.Basic` only).
### Reference
Donoho, D. L. and Stark, P. B. (1989). *Uncertainty principles and signal recovery.* SIAM Journal on Applied Mathematics, **49**(3): 906–931. https://doi.org/10.1137/0149053
---
|
t-analysis
new-contributor
LLM-generated
|
283/0 |
Mathlib.lean,Mathlib/Analysis/Fourier/FiniteAbelian/DonohoStark.lean |
2 |
4 |
['YaelDillies', 'copilot-pull-request-reviewer', 'felixpernegger', 'github-actions'] |
nobody |
1-41942 1 day ago |
24-72827 24 days ago |
24-72707 24 days |
| 42074 |
felixpernegger author:felixpernegger |
chore(Dynamics): fix defs with underscore |
This PR deprecates all (1) defs with underscore in Dynamics and renames it according to the naming convention.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-dynamics
tech debt
maintainer-merge
|
7/4 |
Mathlib/Dynamics/TopologicalEntropy/Subset.lean |
1 |
2 |
['github-actions', 'grunweg'] |
ADedecker assignee:ADedecker |
1-39452 1 day ago |
1-72199 1 day ago |
1-72616 1 day |
| 42073 |
felixpernegger author:felixpernegger |
chore(FieldTheory): fix defs with underscores |
This PR deprecates all (1) defs with underscore in FieldTheory and renames it according to the naming convention.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
easy
maintainer-merge
label:t-algebra$ |
7/4 |
Mathlib/FieldTheory/Differential/Liouville.lean,Mathlib/FieldTheory/Galois/Basic.lean,Mathlib/FieldTheory/IntermediateField/Basic.lean,Mathlib/FieldTheory/LinearDisjoint.lean |
4 |
3 |
['felixpernegger', 'github-actions', 'grunweg'] |
nobody |
1-39435 1 day ago |
1-72366 1 day ago |
1-73209 1 day |
| 42081 |
xroblot author:xroblot |
chore(RingTheory/Ideal/Quotient): split HasFiniteQuotients into Basic and Norm |
Split `HasFiniteQuotients.lean` into `Basic.lean` and `Norm.lean`. The file `Basic.lean` does not depend on `Ideal.absNorm`, thus `AbsNorm` can import the class (needed for the upcoming generalization of `Ideal.absNorm`, see #42048).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
213/176 |
Mathlib.lean,Mathlib/NumberTheory/NumberField/Cyclotomic/Galois.lean,Mathlib/NumberTheory/NumberField/ExistsRamified.lean,Mathlib/NumberTheory/RamificationInertia/HilbertTheory.lean,Mathlib/NumberTheory/RamificationInertia/Unramified.lean,Mathlib/RingTheory/Ideal/Quotient/HasFiniteQuotients.lean,Mathlib/RingTheory/Ideal/Quotient/HasFiniteQuotients/Basic.lean,Mathlib/RingTheory/Ideal/Quotient/HasFiniteQuotients/Norm.lean |
8 |
1 |
['github-actions'] |
nobody |
1-39068 1 day ago |
1-39651 1 day ago |
1-39531 1 day |
| 41203 |
grunweg author:grunweg |
feat: post-composing an immersion with a diffeomorphism yields an immersion |
Use this to golf the proof that `Sum.inr` is a smooth embedding: requested by `@chrisflav` in #40507.
This lemma is a special case of "the composition of immersions is an immersion"; the latter requires additional hypotheses (such as, on behaviour near the boundary or about the manifold being modeled on a Banach space). This statement does not require any such hypotheses.
---
- [x] depends on: #40720
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
51/12 |
Mathlib/Geometry/Manifold/Immersion.lean |
1 |
6 |
['github-actions', 'grunweg', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
1-38799 1 day ago |
1-39340 1 day ago |
8-28615 8 days |
| 42038 |
grunweg author:grunweg |
chore: make `ModelProd` and `ModelPi` implicit_reducible |
They should not be instance reducible (their entire raison d'être is to be a type synonym
to disambiguate typeclass synthesis), but they can be implicit_reducible just fine.
This allows removing another 10-20 backcompat options.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry
tech debt
|
5/17 |
Mathlib/Geometry/Manifold/Algebra/Structures.lean,Mathlib/Geometry/Manifold/ChartedSpace.lean,Mathlib/Geometry/Manifold/Immersion.lean,Mathlib/Geometry/Manifold/IsManifold/Basic.lean,Mathlib/Geometry/Manifold/IsManifold/ExtChartAt.lean,Mathlib/Geometry/Manifold/IsManifold/InteriorBoundary.lean,Mathlib/Geometry/Manifold/MFDeriv/SpecificFunctions.lean,Mathlib/Geometry/Manifold/MFDeriv/UniqueDifferential.lean,Mathlib/Geometry/Manifold/Submersion.lean |
9 |
2 |
['github-actions', 'grunweg'] |
nobody |
1-38618 1 day ago |
1-39304 1 day ago |
1-40763 1 day |
| 40687 |
michaellee94 author:michaellee94 |
feat(Analysis/ODE): uniqueness of integral curves on intervals and intersections |
Adds some uniqueness lemmas for integral curves of a Lipschitz vector field, proved via Grönwall's inequality. Split out from #26413 (existence of maximal solutions). |
t-analysis
new-contributor
|
91/0 |
Mathlib/Analysis/ODE/ExistUnique.lean |
1 |
4 |
['github-actions', 'michaellee94', 'sgouezel'] |
sgouezel assignee:sgouezel |
1-28248 1 day ago |
1-28820 1 day ago |
28-1899 28 days |
| 41876 |
oliver-butterley author:oliver-butterley |
feat (Linter/Header): add config for custom copyright |
This PR adds the config option `linter.style.header.license` to the header linter. This allows downstream projects to use the linter on their projects even if they need to specify a different license or a different filename for the license.
|
t-linter |
40/5 |
Mathlib/Tactic/Linter/Header.lean,MathlibTest/Linter/Header/Basic.lean |
2 |
6 |
['github-actions', 'joneugster', 'oliver-butterley'] |
joneugster assignee:joneugster |
1-24890 1 day ago |
1-24890 1 day ago |
5-37012 5 days |
| 42055 |
yuanyi-350 author:yuanyi-350 |
feat: generalize `range_lt_top_of_det_eq_zero` |
|
t-algebra label:t-algebra$ |
6/10 |
Mathlib/LinearAlgebra/Determinant.lean |
1 |
3 |
['github-actions', 'themathqueen'] |
nobody |
1-24759 1 day ago |
2-42951 2 days ago |
2-42831 2 days |
| 42054 |
yuanyi-350 author:yuanyi-350 |
refactor: generalize `Module.Finite.of_surjective` to arbitrary ring homomorphisms |
|
t-ring-theory
maintainer-merge
|
9/10 |
Mathlib/RingTheory/Finiteness/Basic.lean |
1 |
4 |
['github-actions', 'themathqueen'] |
nobody |
1-24702 1 day ago |
2-43613 2 days ago |
2-43493 2 days |
| 41748 |
j2d9w5xtjn-png author:j2d9w5xtjn-png |
feat(Counterexamples): a finite free group scheme of order four not killed by four |
This PR adds a `Counterexamples/` file resolving a question of Grothendieck in the negative.
## Statement
Grothendieck asked whether a finite locally free group scheme of order `n` is killed by `n`. Deligne proved this holds for **commutative** group schemes. This file gives a counterexample in the non-commutative case.
Over the base ring `R = ℤ[a, b] / (a³, b³, a²b + 2)`, the coordinate algebra
A = R[U, V] / (U² − abU + b²V, V² − a²V)
is a Hopf algebra, finite free of rank four over `R`, whose associated affine group scheme has order four but is **not killed by four**. Concretely, the fourth convolution power of the identity is not the convolution unit:
`Counterexample.GrothendieckPower.counterexample :
Nontrivial R ∧ Module.Free R A ∧ Module.Finite R A ∧ Module.finrank R A = 4 ∧
powerMap 4 ≠ (Algebra.ofId R A).comp counit`
## Background
- **Grothendieck's question**: is a finite locally free group scheme of order `n` killed by `n`? (Recorded as open in Tate, *Finite flat group schemes*, §3.8.)
- **Deligne's theorem**: yes for commutative group schemes (Oort–Tate, *Group schemes of prime order*, §1).
- This construction answers the general (non-commutative) question negatively.
## Proof sketch
1. The base ring `R` has `2b ≠ 0`; this is certified by an explicit faithful `R`-module `M = ℤ/4 × ℤ/4 × (ℤ/2)⁵` with `a`, `b` acting by explicit additive endomorphisms.
2. `A` is built as two nested `QuadraticAlgebra`s, hence finite free of rank four.
3. With `lambda = (1 + aU)(1 + bV)`, one checks `lambda` is group-like and the given `Δ(U)`, `Δ(V)` extend to a bialgebra comultiplication.
4. `powerMap n` sends `U` to `(1 + lambda + ⋯ + lambdaⁿ⁻¹)·U`; at `n = 4` this is `2bUV ≠ 0`.
5. The eighth power map is the convolution unit, so the seventh gives an antipode: `A` is a Hopf algebra of order four not killed by four. (Consistency with Deligne: `A` is not cocommutative — `not_isCocomm`.)
## Disclosure
As stated in the module docstring, and per mathlib policy: the construction of this group scheme and its formalization were carried out with the AI assistants Codex (OpenAI) and Claude (Anthropic), under the direction of the author, who takes responsibility for the contribution.
---
- [ ] depends on: #40500
Once #40500 (affine group scheme ↔ Hopf algebra correspondence) lands, the group-scheme formulation can be restated through that API for a cleaner statement.
|
LLM-generated
new-contributor
|
1094/0 |
Counterexamples.lean,Counterexamples/GrothendieckPower.lean,Mathlib/Algebra/QuadraticAlgebra/Basic.lean,docs/references.bib |
4 |
66 |
['bwangpj', 'eric-wieser', 'github-actions', 'j2d9w5xtjn-png', 'kbuzzard', 'kim-em', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'metakunt', 'riccardobrasca'] |
nobody |
1-22823 1 day ago |
1-23362 1 day ago |
1-72718 1 day |
| 42044 |
wwylele author:wwylele |
feat(GroupTheory/Sylow): a tower of subgroup exists |
This is a pretty trivial corollary but tedious to write formally, so let's provide it for convenience. My recent application of this is to show that a Galois extension of degree `2 ^ n` consists of a tower of quadratic extensions, and with this I can avoid doing too much induction with field theory.
I also took some liberties in the naming, as the one strictly following the statement would be long and obscure.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
28/0 |
Mathlib/GroupTheory/Sylow.lean |
1 |
12 |
['SnirBroshi', 'copilot-pull-request-reviewer', 'github-actions', 'tb65536', 'wwylele'] |
nobody |
1-22120 1 day ago |
1-55391 1 day ago |
2-52537 2 days |
| 40848 |
fbarroero author:fbarroero |
feat(RingTheory/DedekindDomain/SInteger): the ring of S-integers is a localization and a Dedekind Domain |
We prove
```
instance IsDedekindDomain.IsLocalizationSInteger. (R : Type *) [CommRing R] [IsDedekindDomain R]
(S : Set (HeightOneSpectrum R)) (K : Type *) [Field K] [Algebra R K] [IsFractionRing R K]
[Fact (Monoid.IsTorsion (ClassGroup R))] : IsLocalization S.Submonoid (S.integer K)
```
and
```
instance IsDedekindDomain.isDedekindDomainSInteger (R : Type *) [CommRing R] [IsDedekindDomain R]
(S : Set (HeightOneSpectrum R)) (K : Type *) [Field K] [Algebra R K] [IsFractionRing R K]
[Fact (Monoid.IsTorsion (ClassGroup R))] : IsDedekindDomain (S.integer K)
```
This is joint work with @larskuehne.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
large-import
|
103/2 |
Mathlib/RingTheory/DedekindDomain/SInteger.lean |
1 |
6 |
['copilot-pull-request-reviewer', 'github-actions'] |
faenuccio assignee:faenuccio |
1-20193 1 day ago |
1-20758 1 day ago |
15-50464 15 days |
| 42063 |
felixpernegger author:felixpernegger |
chore: add newline between public and private imports |
It is (or at least seems to be) convention to make a new line between public imports and private import (and public imports should come first). This PR adds those missing newlines.
Sometimes public imports were (mistakenly?) added *after* private imports. This PR fixes this as well and orders the imports of affected lines alphabetically.
As a standalone PR, this is pretty unimportant, but ought to make the diffs (and thus reviewing) of later PRs sorting imports etc prettier
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
213/61 |
Mathlib/Algebra/AddConstMap/Basic.lean,Mathlib/Algebra/AffineMonoid/Embedding.lean,Mathlib/Algebra/CharP/MixedCharZero.lean,Mathlib/Algebra/Group/ModEq.lean,Mathlib/Algebra/Order/Antidiag/FinsuppEquiv.lean,Mathlib/Algebra/Order/Archimedean/Real/Hom.lean,Mathlib/Algebra/Order/GroupWithZero/Basic.lean,Mathlib/Algebra/Order/Ring/Interval.lean,Mathlib/Algebra/Order/ToIntervalMod.lean,Mathlib/Algebra/Polynomial/RingDivision.lean,Mathlib/AlgebraicTopology/SimplicialSet/ProdStdSimplex.lean,Mathlib/AlgebraicTopology/SimplicialSet/StdSimplex.lean,Mathlib/Analysis/Asymptotics/AsymptoticEquivalent.lean,Mathlib/Analysis/Asymptotics/TVS.lean,Mathlib/Analysis/CStarAlgebra/ApproximateUnit.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Projection.lean,Mathlib/Analysis/CStarAlgebra/Fuglede.lean,Mathlib/Analysis/CStarAlgebra/Module/Constructions.lean,Mathlib/Analysis/CStarAlgebra/Module/Defs.lean,Mathlib/Analysis/Calculus/ContDiff/Operations.lean,Mathlib/Analysis/Calculus/Deriv/Inverse.lean,Mathlib/Analysis/Calculus/FDeriv/Basic.lean,Mathlib/Analysis/Calculus/FDeriv/OfCompLeft.lean,Mathlib/Analysis/Calculus/InverseFunctionTheorem/FDeriv.lean,Mathlib/Analysis/Calculus/TangentCone/DimOne.lean,Mathlib/Analysis/Calculus/TangentCone/Pi.lean,Mathlib/Analysis/Calculus/TangentCone/Prod.lean,Mathlib/Analysis/Calculus/TangentCone/Seq.lean,Mathlib/Analysis/Complex/BranchLogRoot.lean,Mathlib/Analysis/Complex/Isometry.lean,Mathlib/Analysis/Complex/Trigonometric.lean,Mathlib/Analysis/Complex/UpperHalfPlane/FixedPoints.lean,Mathlib/Analysis/Complex/UpperHalfPlane/Manifold.lean,Mathlib/Analysis/Convex/FunctionTopology.lean,Mathlib/Analysis/Fourier/FiniteAbelian/PontryaginDuality.lean,Mathlib/Analysis/InnerProductSpace/GramMatrix.lean,Mathlib/Analysis/InnerProductSpace/TensorProduct.lean,Mathlib/Analysis/Matrix/Hermitian.lean,Mathlib/Analysis/Normed/Algebra/GelfandFormula.lean,Mathlib/Analysis/Normed/Field/Lemmas.lean,Mathlib/Analysis/Normed/Module/PiTensorProduct/InjectiveSeminorm.lean,Mathlib/Analysis/RCLike/ContinuousMap.lean,Mathlib/Analysis/RCLike/Sqrt.lean,Mathlib/Analysis/SpecialFunctions/Choose.lean,Mathlib/Analysis/SpecialFunctions/Complex/Arctan.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Abs.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/ExpLog/Basic.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/ExpLog/Order.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Rpow/IntegralRepresentation.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Rpow/Isometric.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Rpow/Order.lean,Mathlib/Analysis/SpecialFunctions/ContinuousFunctionalCalculus/Rpow/RingInverseOrder.lean,Mathlib/Analysis/SpecialFunctions/Exp.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Angle.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Arctan.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/ChebyshevGauss.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/Orthogonality.lean,Mathlib/Analysis/SpecialFunctions/Trigonometric/Chebyshev/RootsExtrema.lean,Mathlib/Combinatorics/Additive/SubsetSum.lean,Mathlib/Combinatorics/Compactness.lean,Mathlib/Combinatorics/SetFamily/AhlswedeZhang.lean,Mathlib/Computability/AkraBazzi/AkraBazzi.lean,Mathlib/Computability/AkraBazzi/GrowsPolynomially.lean,Mathlib/Computability/AkraBazzi/SumTransform.lean,Mathlib/Computability/StateTransition.lean,Mathlib/Control/Monad/Cont.lean,Mathlib/Data/Fintype/Parity.lean,Mathlib/Data/Int/Bitwise.lean,Mathlib/Data/Int/ModEq.lean,Mathlib/Data/List/Lookmap.lean,Mathlib/Data/List/ModifyLast.lean,Mathlib/Data/List/OffDiag.lean,Mathlib/Data/List/Sort.lean,Mathlib/Data/Nat/Bitwise.lean,Mathlib/Data/Nat/Digits/Defs.lean,Mathlib/Data/Nat/MaxPowDiv.lean,Mathlib/Data/Nat/ModEq.lean,Mathlib/Data/Num/Lemmas.lean,Mathlib/Data/String/Basic.lean,Mathlib/Data/Tree/Basic.lean,Mathlib/FieldTheory/RatFunc/AsPolynomial.lean,Mathlib/Geometry/Euclidean/NinePointCircle.lean,Mathlib/Geometry/Euclidean/Similarity.lean,Mathlib/Geometry/Euclidean/Volume/Measure.lean,Mathlib/Geometry/Manifold/Algebra/LieGroup.lean,Mathlib/Geometry/Manifold/Algebra/Monoid.lean,Mathlib/Geometry/Manifold/Complex.lean,Mathlib/Geometry/Manifold/ContMDiff/Atlas.lean,Mathlib/Geometry/Manifold/Instances/Icc.lean,Mathlib/Geometry/Manifold/IntegralCurve/ExistUnique.lean,Mathlib/Geometry/Manifold/MFDeriv/Basic.lean,Mathlib/Geometry/Manifold/MFDeriv/UniqueDifferential.lean,Mathlib/Geometry/Manifold/VectorBundle/MDifferentiable.lean,Mathlib/Geometry/Manifold/VectorBundle/Tangent.lean,Mathlib/Geometry/Manifold/VectorBundle/Tensoriality.lean,Mathlib/Geometry/Manifold/VectorField/LieBracket.lean,Mathlib/GroupTheory/Archimedean.lean,Mathlib/GroupTheory/Congruence/Defs.lean,Mathlib/InformationTheory/Coding/KraftMcMillan.lean,Mathlib/Lean/Elab/InfoTree.lean |
158 |
5 |
['felixpernegger', 'github-actions', 'leanprover-radar', 'mathlib-bors', 'mathlib-merge-conflicts'] |
nobody |
1-20076 1 day ago |
1-23247 1 day ago |
2-3272 2 days |
| 41965 |
bryangingechen author:bryangingechen |
ci: retire legacy zulip emoji workflows, enable emojis on mathlib4-nightly-testing |
This PR replaces our existing zulip emoji reaction workflows with new triggers in the new "reconciliation" workflow (`zulip_emoji_reconcile.yml`) added in #41852.
Deleted workflows:
- `zulip_emoji_ci_status.yaml`: handles CI status reactions. Replaced with `workflow_run` trigger.
- `zulip_emoji_closed_pr.yaml`: handles reactions for closed / reopened PRs. Replaced with `pull_request_target` `closed` and `reopened` triggers.
- `zulip_emoji_labelling.yaml`: handles reactions for awaiting-author and maintainer-merge labels. Replaced with `pull_request_target` `labeled` and `unlabeled` triggers.
- `zulip_emoji_merge_delegate.yaml`: handles reactions for PRs merged into `master`. Replaced with `pull_request_target` `closed` and `reopened` triggers.
The Zulip reaction steps have also been removed from `maintainer_bors_wf_run.yml` which now just handles labels: that label event then triggers the reconciliation workflow rather than handling the reactions on its own.
This PR also adds and wires in a configuration file for `mathlib4-nightly-testing` so that reactions for `nightly#XXX` PRs are also managed.
Prepared with Claude code.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
CI
LLM-generated
file-removed
maintainer-merge
|
159/348 |
.github/workflows/maintainer_bors_wf_run.yml,.github/workflows/zulip_emoji_ci_status.yaml,.github/workflows/zulip_emoji_closed_pr.yaml,.github/workflows/zulip_emoji_labelling.yaml,.github/workflows/zulip_emoji_merge_delegate.yaml,.github/workflows/zulip_emoji_reconcile.yml,.github/zulip-emoji-config-nightly.json,docs/workflows.md |
8 |
3 |
['github-actions', 'joneugster'] |
joneugster assignee:joneugster |
1-19389 1 day ago |
5-57586 5 days ago |
5-57466 5 days |
| 42082 |
attilavjda author:attilavjda |
feat(FieldTheory): reduce Frobenius powers modulo the extension degree |
Adds ring-hom and pointwise lemmas reducing powers of Frobenius modulo the extension degree of a finite field.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
12/0 |
Mathlib/FieldTheory/Finite/Basic.lean |
1 |
5 |
['attilavjda', 'felixpernegger', 'github-actions'] |
nobody |
1-16758 1 day ago |
1-17542 1 day ago |
1-25893 1 day |
| 40725 |
dennj author:dennj |
chore(SetTheory/Ordinal): execute deprecation TODOs |
This PR resolves several ordinal deprecation TODOs by making the `add_one` spelling primary over the older `succ`-spelled theorem names.
It deprecates the old names, rewires Mathlib uses to the new names, and renames `Cardinal.noMaxOrder` to the more precise `Cardinal.noMaxOrder_ord_toType`. The old deprecated names are no longer used internally.
Code clean up in Ordinal.Notation |
t-set-theory
tech debt
|
121/149 |
Mathlib/CategoryTheory/Presentable/Directed.lean,Mathlib/CategoryTheory/Presentable/OrthogonalReflection.lean,Mathlib/CategoryTheory/Presentable/SharplyLT/Basic.lean,Mathlib/CategoryTheory/SmallObject/IsCardinalForSmallObjectArgument.lean,Mathlib/FieldTheory/CardinalEmb.lean,Mathlib/SetTheory/Ordinal/Arithmetic.lean,Mathlib/SetTheory/Ordinal/Basic.lean,Mathlib/SetTheory/Ordinal/Exponential.lean,Mathlib/SetTheory/Ordinal/FixedPoint.lean,Mathlib/SetTheory/Ordinal/Notation.lean,Mathlib/SetTheory/Ordinal/Principal.lean,Mathlib/SetTheory/Ordinal/Univ.lean,Mathlib/SetTheory/Ordinal/Veblen.lean |
13 |
14 |
['dennj', 'github-actions', 'mathlib-merge-conflicts', 'plp127', 'vihdzp'] |
alreadydone assignee:alreadydone |
1-12947 1 day ago |
2-49629 2 days ago |
29-42847 29 days |
| 42089 |
mathlib-splicebot author:mathlib-splicebot |
fix(LinearAlgebra/Matrix/Notation): fix defeq abuse in lemma |
---
This PR was automatically created from PR #39161 by @alreadydone via a [review comment](https://github.com/leanprover-community/mathlib4/pull/39161#discussion_r3650515623) by @themathqueen. |
t-algebra
easy
maintainer-merge
label:t-algebra$ |
1/1 |
Mathlib/LinearAlgebra/Matrix/Notation.lean |
1 |
3 |
['github-actions', 'themathqueen'] |
nobody |
1-9308 1 day ago |
1-10965 1 day ago |
1-10845 1 day |
| 42079 |
JX-Mo author:JX-Mo |
refactor(RepresentationTheory): weaken condition of Schur's lemma and add a surjective lemma |
(1) Add a missing lemma `IsIrreducible.surjective_or_eq_zero` parallel to the existing `injective` `bijective` lemmas.
(2) Replace the condition `[FiniteDimensional k V]` of Schur's lemma by `[FiniteDimensional k (IntertwiningMap ρ ρ)]`. Note that the former will automatically give the latter by typeclass inference.
These have an immediate downstream application: irreducible admissible smooth representations (of e.g. GL2(Qp)) are usually not finite dimensional but the weaker condition`[FiniteDimensional k (IntertwiningMap ρ ρ)]` in (2) can be easily deduced from the definition of being "irreducible admissible smooth" by using (1) |
new-contributor
t-algebra
label:t-algebra$ |
20/14 |
Mathlib/RepresentationTheory/AlgebraRepresentation/Basic.lean,Mathlib/RepresentationTheory/Irreducible.lean |
2 |
2 |
['github-actions'] |
nobody |
1-8275 1 day ago |
1-54961 1 day ago |
1-54841 1 day |
| 42090 |
themathqueen author:themathqueen |
fix(LinearAlgebra/Matrix/Notation): fix defeq abuse in lemmas |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
followup on #42089
[](https://gitpod.io/from-referrer/)
|
t-algebra
easy
label:t-algebra$ |
2/2 |
Mathlib/LinearAlgebra/Matrix/Notation.lean |
1 |
1 |
['github-actions'] |
nobody |
1-7916 1 day ago |
1-9465 1 day ago |
1-9357 1 day |
| 42091 |
felixpernegger author:felixpernegger |
chore(RingTheory): fix `backward.inferInstanceAs.wrap.data` exception |
I am not sure why this works, but specifying the proof (rather def?) `Ideal.Quotient.algebraQuotientMapQuotient` resolves the necessity of the exception.
The `unfold ResidueField` is not necessarily needed. Also, `infer_instance` etc, does not work even after unfolding.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
tech debt
|
3/2 |
Mathlib/RingTheory/Unramified/LocalRing.lean |
1 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
1-7816 1 day ago |
1-8527 1 day ago |
1-8422 1 day |
| 41525 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add Smooth.Basic for smooth representations |
This PR introduces basic setup for smooth representations of a topological group. Hopefully it will serve as preliminary content for those who are interested in formalizing representation theory for p-adic reductive groups in the future. We introduce the following in the file:
1. Define smoothness for representations of a topological group. It is a property for a representation to be smooth: the stabilizer of any vector is open.
2. Prove basic closure properties: subrepresentations, quotient representations, tensor products, direct sums of smooth representations are smooth.
3. Construct smoothHom and contragredient: they are obtained by cutting out smooth vectors from the naive hom and dual.
- [ ] depends on #40941
- [ ] depends on #41081 |
new-contributor
t-algebra
label:t-algebra$ |
345/0 |
Mathlib.lean,Mathlib/RepresentationTheory/Smooth/Basic.lean,Mathlib/RepresentationTheory/Stabilizer.lean,Mathlib/RepresentationTheory/Subrepresentation.lean,Mathlib/Tactic/Linter/DirectoryDependency.lean |
5 |
4 |
['JX-Mo', 'felixpernegger', 'github-actions'] |
nobody |
1-7167 1 day ago |
9-13016 9 days ago |
17-35022 17 days |
| 41935 |
martinamaggio author:martinamaggio |
feat(Probability/Independence): grouping an independent family by pairwise disjoint index sets |
If `m : ι → MeasurableSpace Ω` is an independent family of σ-algebras and `G : ι' → Set ι` is a
pairwise disjoint family of index sets, then the family of grouped σ-algebras
`fun i' ↦ ⨆ j ∈ G i', m j` is again independent.
This is the indexed-family version of the existing two-group lemma `indep_iSup_of_disjoint`, from
which it follows by induction on the finite subfamily, peeling off one group at a time against the
union of the remaining ones. As usual it is proven for the kernel notion of independence
(`Kernel.iIndep_iSup_of_disjoint`) and specialized to independence w.r.t. a measure
(`iIndep_iSup_of_disjoint`) and to conditional independence (`iCondIndep_iSup_of_disjoint`).
The lemma is the natural bridge from an independent family to block/grouping arguments — e.g.
Markov-style properties of recursions driven by disjoint sets of randomness sources. It was
developed for a formalization of end-to-end latency distributions of periodic task chains, where it
establishes that successive chain states, being measurable w.r.t. σ-algebras of disjoint groups of
an independent family, form an independent family themselves. |
t-measure-probability
new-contributor
|
52/0 |
Mathlib/Probability/Independence/Basic.lean,Mathlib/Probability/Independence/Conditional.lean,Mathlib/Probability/Independence/Kernel/Indep.lean |
3 |
2 |
['github-actions'] |
nobody |
1-5855 1 day ago |
6-77778 6 days ago |
6-77658 6 days |
| 41081 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add Subrepresentation.toRepresentation_apply and Subrepresentation.quotient |
Add a lemma for `Subrepresentation` recording the inherited group action. Help avoid unfolding `Subrepresentation.toRepresentation` when analyzing the action.
Add the `quotient` representation associated to a `Subrepresentation`. It wraps up `Representation.quotient` and `Representation.Subrepresentation` and then we also record the inherited group action.
|
t-algebra
new-contributor
label:t-algebra$ |
26/0 |
Mathlib/RepresentationTheory/Subrepresentation.lean |
1 |
17 |
['JX-Mo', 'Whysoserioushah', 'github-actions'] |
nobody |
1-5750 1 day ago |
14-45975 14 days ago |
30-15424 30 days |
| 39829 |
or4nge19 author:or4nge19 |
feat(LinearAlgebra): basis flag lemmas and genEigenspace map |
Part 1/3 of #39139.
Introduces basis flag lemmas and intertwining `genEigenspace` map, using directly available constructors, ie introducing none (so improving on #39139)
Co-authored-by: [kuotsanhsu](https://github.com/kuotsanhsu) [learningstud@gmail.com](mailto:learningstud@gmail.com)
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
large-import
label:t-algebra$ |
76/2 |
Mathlib/LinearAlgebra/Basis/Flag.lean,Mathlib/LinearAlgebra/Eigenspace/Basic.lean |
2 |
3 |
['github-actions', 'themathqueen'] |
themathqueen assignee:themathqueen |
1-5615 1 day ago |
62-16253 62 days ago |
62-16160 62 days |
| 41678 |
JX-Mo author:JX-Mo |
refactor(RepresentationTheory): record the concrete binary biproduct |
Record the concrete binary biproduct explicitly from the instance `HasBinaryBiproducts` to make its _**proof**_ reusable. This strengthens the exposed mathematical statement from "_the biproduct exists_" to "_the biproduct exists and is isomorphic to_ `prod _ _`".
This has an immediate downstream application: to prove that the property of being smooth is stable under product, we need to reconstruct the "product". The current instance `HasBinaryBiproducts` only tells that the product exists and the information about how the product looks like is not directly available, so now we need to reprove that `prod` is a concrete categorical (bi)product. This PR aims to eliminate such future duplicated proofs. |
t-algebra
new-contributor
label:t-algebra$ |
23/7 |
Mathlib/RepresentationTheory/Rep/Basic.lean |
1 |
8 |
['JX-Mo', 'Whysoserioushah', 'github-actions'] |
nobody |
1-5528 1 day ago |
13-29631 13 days ago |
13-29531 13 days |
| 41808 |
JX-Mo author:JX-Mo |
feat(RepresentationTheory): add induction_on and relation-equalities lemmas for induced representations |
Add an `induction_on` lemma for `IndV`, which packages `Coinvariants.induction_on` `TensorProduct.induction` `MonoidAlgebra.induction_linear`. The remaining two induction steps are extremely simple: step`mk` for elementary generators of the form `⟦h⊗a⟧=IndV.mk _ _ h a` and another step `add` for the addition induction.
Add two relation equality lemmas, describing the action coming from the source group on the induced representation.
The purpose is to treat induced representations in Mathlib as how we do in paper: prove things by using elementary generators and relations. Note that`IndV` and `IndV.mk` are abbrev's, so `simp` would expose the implementation and unfold the simpler expressions in practice. |
t-algebra
new-contributor
label:t-algebra$ |
28/0 |
Mathlib/RepresentationTheory/Induced.lean |
1 |
2 |
['github-actions'] |
nobody |
1-4489 1 day ago |
10-45183 10 days ago |
10-45094 10 days |
| 42092 |
D-Thomine author:D-Thomine |
Refactor(UniformIntegrable): Change the definition of UnifIntegrable |
From
`∀ ⦃ε : ℝ⦄ (_ : 0 < ε), ∃ (δ : ℝ) (_ : 0 < δ), ∀ i s, MeasurableSet s → μ s ≤ ENNReal.ofReal δ → eLpNorm (s.indicator (f i)) p μ ≤ ENNReal.ofReal ε`
to
`Tendsto (fun ε ↦ ⨆ (i : ι) (s : Set α) (_ : μ s ≤ ε), eLpNorm (f i) p (μ.restrict s)) (𝓝 0) (𝓝 0)`
Mains effects are first to work directly in `ℝ≥0∞` instead of working in `ℝ` or `ℝ≥0` and coercing, with tends to simplify everything but needs extensive fixes, and secondly to benefit from all the library developed for filters.
Another suggestion was to use the definition `Tendsto (fun s ↦ ⨆ (i : ι), eLpNorm (f i) p (μ.restrict s)) (comap μ (𝓝 0)) (𝓝 0)`, which is cleaner, but hard to use due to the lack of lemmas around `(comap μ (𝓝 0))`. This might be interesting in the future if this latter filter see some other use, but is somewhat cumbersome right now.
For now, lemmas `unifIntegrable_iff` and `unifIntegrable_iff'` provide the equivalence between the new and the old definitions (modulo the coercion), which is useful to limit the modifications of downstream results. I intend to keep working on this file to put lemmas and proofs more directly in line with the newer definition.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
346/372 |
Mathlib/MeasureTheory/Function/ConditionalExpectation/Real.lean,Mathlib/MeasureTheory/Function/ConvergenceInMeasure.lean,Mathlib/MeasureTheory/Function/Egorov.lean,Mathlib/MeasureTheory/Function/UnifTight.lean,Mathlib/MeasureTheory/Function/UniformIntegrable.lean,Mathlib/Probability/Kernel/Disintegration/Density.lean |
6 |
1 |
['github-actions'] |
nobody |
1-3749 1 day ago |
1-3749 1 day ago |
1-3629 1 day |
| 36313 |
SproutSeeds author:SproutSeeds |
feat(Inversion): cobounded tendsto near center |
Part of #5939
Add `tendsto_inversion_nhdsNE_center_cobounded` in `Mathlib/Geometry/Euclidean/Inversion/Basic.lean`, proving `Tendsto (inversion c R) (𝓝[≠] c) (Bornology.cobounded P)` for `R ≠ 0`.
Tools used: Codex 5.3 extra high
---
Happy to adjust naming, placement, or proof style based on maintainer preference.
|
t-euclidean-geometry
new-contributor
LLM-generated
|
28/0 |
Mathlib/Geometry/Euclidean/Inversion/Basic.lean |
1 |
14 |
['SproutSeeds', 'euprunin', 'github-actions', 'jsm28', 'kbuzzard', 'ocfnash'] |
jsm28 assignee:jsm28 |
1-1225 1 day ago |
1-1634 1 day ago |
7-38214 7 days |
| 41127 |
TJHeeringa author:TJHeeringa |
feat(Analysis/InnerProductSpace/Reproducing): add sum of two RKHS |
Add the sum of two RKHS. This space comes equipped with the norm
$$
\\|f\\|^2 = \inf \\{ \\|f_1\\| + \\|f_1\\| : f_1\in H_1, f_2\in H_2 \text{ s.t. } f(x) = f_1(x) + f_2(x) \quad \forall x\in X \\}
$$
This quotient norm is realized by defining the space as the quotient of `WithLp 2 (H × H₁)` with the kernel of the map `WithLp 2 (H × H₁) →L[𝕜] (X → V), (f,g) ↦ ↑f + ↑f` and defining the `coeCLM` of the RKHS accordingly.
---
I am doubting whether `generator` and `sumSpace` are good names.
This sum of two RKHs `sumSpace` is not a direct sum or a Hilbert sum, but the sum from interpolation theory. Once that is properly implemented the construction of `sumSpace` should likely be altered accordingly.
#### AI usage:
I used AI for a previous attempt in which I defined `sumSpace` as
```lean4
abbrev sumSpace := (generator H H₁).range
```
instead of
```lean4
abbrev sumSpace := WithLp 2 (H × H₁) ⧸ (generator H H₁).ker
```
However, that lead to instance collisions.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41149
[](https://gitpod.io/from-referrer/)
|
t-analysis |
130/1 |
Mathlib/Analysis/InnerProductSpace/Reproducing.lean |
1 |
6 |
['Maldooor', 'TJHeeringa', 'github-actions', 'mathlib-bors', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
nobody |
0-83536 23 hours ago |
5-84955 5 days ago |
6-30719 6 days |
| 42096 |
NoahW314 author:NoahW314 |
feat(Algebra/Order/IsBotOne): add `IsBotOneClass` instances (Prod, Pi, Subsingleton) |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
15/0 |
Mathlib/Algebra/Order/IsBotOne.lean |
1 |
1 |
['github-actions'] |
nobody |
0-77272 21 hours ago |
0-80247 22 hours ago |
0-80127 22 hours |
| 42095 |
DrDMT-VR author:DrDMT-VR |
feat(Analysis/CStarAlgebra): the non-unital CFC maps into closed two-sided ideals |
## What
For a non-unital C*-algebra `A`, a closed two-sided ideal `I`, an element `a ∈ I`, and any
`f : ℝ → ℝ`, this proves `cfcₙ f a ∈ I`. No hypotheses on `f` are needed: whenever `cfcₙ`
would take its junk value (`f` not continuous on the quasispectrum, `f 0 ≠ 0`, or `a` not
selfadjoint) that value is `0 ∈ I`.
New declarations (namespace `TwoSidedIdeal`):
- `smul_mem_of_isClosed` — a closed two-sided ideal in a non-unital C*-algebra is closed
under the scalar action (proved via the canonical approximate unit `CStarAlgebra.approximateUnit`).
- `cfcₙHom_mem_of_isClosed` — for selfadjoint `a ∈ I`, every value of the underlying
homomorphism `cfcₙHom` lies in `I` (Weierstrass induction on `C(σₙ ℝ a, ℝ)₀`).
- `cfcₙ_mem_of_isClosed` — the main result.
## Why
Closed two-sided ideals of a C*-algebra are hereditary under the continuous functional
calculus; this is a basic tool for spectral-projection and ideal-membership arguments, and
complements the existing "cfc commutes with *-homomorphisms" results. `smul_mem_of_isClosed`
is of independent interest (a closed two-sided ideal is a submodule).
## Notes
This is my second contribution (see #42093). I checked the referenced cfc / approximate-unit
API against current master at the source level; CI is the first full build and I will fix
anything it flags. Suggested location `Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Ideal.lean`;
happy to relocate if preferred.
|
t-analysis
new-contributor
|
91/0 |
Mathlib.lean,Mathlib/Analysis/CStarAlgebra/ContinuousFunctionalCalculus/Ideal.lean |
2 |
2 |
['github-actions'] |
nobody |
0-73081 20 hours ago |
0-73647 20 hours ago |
0-73670 20 hours |
| 25834 |
Rida-Hamadani author:Rida-Hamadani |
feat(SimpleGraph): girth-diameter inequality |
This is a useful inequality that comes up in proofs related to Moore graphs, cages, SRGs, and so on.
Co-authored-by: Malhar A. Patel <142735852+Mal-Pat@users.noreply.github.com>
---
<!-- The text above the `---` will become the commit message when your
PR is merged. Please leave a blank newline before the `---`, otherwise
GitHub will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
To indicate co-authors, include lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines at the bottom of the commit message
(that is, before the `---`) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [x] depends on: #xyz [optional extra text]
-->
- [x] depends on: #26380
- [x] depends on: #25650
- [x] depends on: #26614
- [x] depends on: #33249
- [x] depends on: #33506
[](https://gitpod.io/from-referrer/)
|
t-combinatorics |
17/2 |
Mathlib/Combinatorics/SimpleGraph/Girth.lean |
1 |
10 |
['SnirBroshi', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
nobody |
0-71103 19 hours ago |
5-43141 5 days ago |
24-29799 24 days |
| 42093 |
DrDMT-VR author:DrDMT-VR |
feat(Topology/Algebra/Ring): topological closure of a two-sided ideal |
## What
Defines `TwoSidedIdeal.closure`, the topological closure of a two-sided ideal in a
topological ring, together with its basic API. This mirrors the existing one-sided
`Ideal.closure` (`Mathlib/Topology/Algebra/Ring/Ideal.lean`), but is stated in the
generality of non-unital non-associative topological rings (`IsTopologicalRing` over
`NonUnitalNonAssocRing`), where one-sided ideals are unavailable.
New declarations (namespace `TwoSidedIdeal`): `closure`, `coe_closure`,
`mem_closure_iff`, `le_closure`, `closure_mono`, `closure_minimal`, `isClosed_closure`,
`closure_eq_of_isClosed`, `closure_closure`, `closure_top`, and `closure_ne_top` (in a
unital ring whose units are open, e.g. a Banach algebra via `Units.isOpen`, the closure of
a proper two-sided ideal is proper).
## Why
Mathlib has no topological-closure API for `TwoSidedIdeal`. Closed two-sided ideals are
the basic objects of C*-algebra ideal theory, and `closure_ne_top` is the standard first
step toward "maximal two-sided ideals are closed".
## Notes
This is my first mathlib contribution. I checked the file against current master at the
source level (the referenced API resolves), but CI is the first full build and I will
happily fix anything it flags. I named the definition `closure` to match the
`Ideal.closure` precedent, but am glad to rename to `topologicalClosure` or relocate the
file if preferred.
|
t-topology
new-contributor
|
114/0 |
Mathlib.lean,Mathlib/Topology/Algebra/Ring/TwoSidedIdeal.lean |
2 |
2 |
['github-actions'] |
nobody |
0-68042 18 hours ago |
0-85124 23 hours ago |
0-85151 23 hours |
| 40973 |
certik author:certik |
feat: multiplicative automatic continuity on ℝ |
This PR adds the multiplicative companion of the existing additive automatic-continuity theorem `AddMonoidHom.continuous_of_measurable`. See the git commit descriptions for all the details.
Depends on https://github.com/leanprover-community/mathlib4/pull/40976.
AI usage disclosure: I used Claude Opus 4.8 to create the theorems and proofs in my own Lean project, then extracted them into this PR since I think they are general purpose and would be useful for other people. I iterated on the proofs until they are as simple as I could get them. I am new to Lean, so if something should be reworked, please let me know. Lean is amazing, I was able to use it to prove various theorems and check my derivations. This is my little contribution back to the project. |
t-measure-probability
LLM-generated
new-contributor
|
159/0 |
Mathlib.lean,Mathlib/MeasureTheory/Measure/Haar/AutomaticContinuity.lean |
2 |
10 |
['certik', 'github-actions', 'mathlib-merge-conflicts', 'wwylele'] |
kex-y assignee:kex-y |
0-67150 18 hours ago |
29-44675 29 days ago |
31-68252 31 days |
| 41181 |
joelriou author:joelriou |
feat(CategoryTheory): limits in Comma categories |
Under suitable assumptions, `Comma.fst/snd` jointly reflect (co)limits. These additions allow to simplify the definition `coneOfPreservesIsLimit` and its dual.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
58/28 |
Mathlib/CategoryTheory/Limits/Comma.lean |
1 |
13 |
['github-actions', 'joelriou', 'smorel394'] |
robin-carlier assignee:robin-carlier |
0-67149 18 hours ago |
26-19214 26 days ago |
26-36508 26 days |
| 41183 |
joelriou author:joelriou |
feat(CategoryTheory/Presentable): new constructor for `IsCardinalFilteredGenerator` |
Instead of `w`-small index categories, one may provide essentially `w`-small categories instead.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
22/3 |
Mathlib/CategoryTheory/Presentable/CardinalFilteredPresentation.lean |
1 |
5 |
['github-actions', 'joelriou', 'smorel394'] |
robin-carlier assignee:robin-carlier |
0-67148 18 hours ago |
26-36469 26 days ago |
26-36349 26 days |
| 41523 |
Harmenszoon author:Harmenszoon |
feat(Analysis/SpecialFunctions): add the Chase-Lovett diagonal reduction for binEntropy |
This PR adds the two-variable entropy inequality of Chase and Lovett ([arXiv:2211.11689](https://arxiv.org/abs/2211.11689), Lemma 2.2): for `x, y ∈ [0, 1]`,
```
x * binEntropy y + y * binEntropy x ≤ 2 * sqrt (x * y) * binEntropy (sqrt (x * y))
```
in a new leaf file `Mathlib/Analysis/SpecialFunctions/BinaryEntropy/Diagonal.lean`, together with its `negMulLog (1 - ·)` half (`Real.mul_negMulLog_one_sub_add_le`) and a `private` concavity layer for the comparison function `η u = exp u * negMulLog (1 - exp (-u))`. Two entries are added to `docs/references.bib` (Chase–Lovett arXiv:2211.11689, Boppana arXiv:2301.09664).
**Motivation.** This inequality is the reusable reduction step behind the recent entropic lower bounds for Frankl's union-closed sets conjecture (Gilmer; Alweiss–Huang–Sellke; Chase–Lovett; Sawin; Boppana): it reduces two-variable inequalities of Boppana type `K * (x * h y + y * h x) ≤ h (x * y)` to one-variable inequalities `2 * K * t * h t ≤ h (t ^ 2)`. `Mathlib/Analysis/SpecialFunctions/BinaryEntropy.lean` currently contains calculus basics for `binEntropy` only, and no inequality of this family; I checked current master for collisions before opening this. A kernel-checked downstream application — a complete Lean formalization of the union-closed lower bound at the constant `(3 - √5)/2` that uses exactly this reduction — is public at https://github.com/demonstrandum-research/artifacts (the `UCFrankl` development), which I maintain.
**Proof shape** (one page of calculus): substituting `x = exp (-u)`, the inequality becomes midpoint concavity of `η` on `[0, ∞)`; the `negMulLog (x * y)` parts of the two sides cancel exactly, the `negMulLog (1 - ·)` parts transfer to `η` via the identity `x * η (-log x) = negMulLog (1 - x)`, and `η'' ≤ 0` reduces to `log t ≤ t - 1`. Stating `η` through `negMulLog` absorbs the `0 * log 0` boundary behaviour, so no separate edge-case argument is needed at `x = 1`.
**Design notes / open questions for reviewers.**
- Hypotheses are stated as `0 ≤ x`/`x ≤ 1` pairs rather than `x ∈ Set.Icc 0 1`; happy to convert if the membership form is preferred.
- The `η`-machinery is `private`; it could be exposed if judged independently useful.
- File placement: a new `BinaryEntropy/Diagonal.lean` leaf keeps the import footprint of `BinaryEntropy.lean` unchanged (the proof needs `Analysis.Convex.Deriv`); merging into the main file is also possible if preferred.
- Naming: `mul_binEntropy_add_mul_binEntropy_le` / `mul_negMulLog_one_sub_add_le` follow the conclusion-based convention but I am glad to rename.
**AI disclosure** (per the [mathlib AI policy](https://leanprover-community.github.io/contribute/index.html)): the Lean code in this PR was generated by LLM agents (Anthropic's Claude, running in an agent pipeline that I operate under the name Demonstrandum), and was then compile-verified against mathlib and reviewed by me. This PR description was also prepared with AI assistance and reviewed by me. The proof is elementary calculus as summarized above; I understand it and take full responsibility for the contribution. I am adding the `LLM-generated` label as required. The downstream `UCFrankl` development linked above (kernel-checked, axioms `[propext, Classical.choice, Quot.sound]` only) is the evidence that the lemma carries real weight in applications.
---
- [x] depends on: nothing
|
t-analysis
LLM-generated
new-contributor
|
227/0 |
Mathlib.lean,Mathlib/Analysis/SpecialFunctions/BinaryEntropy/Diagonal.lean,docs/references.bib |
3 |
5 |
['Harmenszoon', 'Timeroot', 'github-actions'] |
j-loreaux assignee:j-loreaux |
0-67147 18 hours ago |
17-55050 17 days ago |
17-54930 17 days |
| 41595 |
NoahW314 author:NoahW314 |
feat(Probability/ProbabilityMassFunction): add missing `PMF` instances (`Nontrivial`, `IsEmpty`, etc.) |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability |
19/0 |
Mathlib/Probability/ProbabilityMassFunction/Basic.lean,Mathlib/Probability/ProbabilityMassFunction/Monad.lean |
2 |
1 |
['github-actions'] |
EtienneC30 assignee:EtienneC30 |
0-67146 18 hours ago |
16-5157 16 days ago |
16-5037 16 days |
| 41639 |
adomani author:adomani |
chore: add missing `to_additive` docstrings in MeasureTheory.Group |
Adds the missing additive doc-strings (multiplicative side has a hand-written doc-string, additive side did not) across 3 file(s) in **MeasureTheory.Group**.
The additive doc-strings are simple-minded translations of the multiplicative ones, with referenced lemma names replaced by their `to_additive` counterparts. These gaps were found by an environment linter that pairs each declaration with its `to_additive` counterpart and checks that both or neither is documented.
🤖 Generated with [Claude Code](https://claude.com/claude-code) |
LLM-generated
t-measure-probability
|
41/16 |
Mathlib/MeasureTheory/Group/Arithmetic.lean,Mathlib/MeasureTheory/Group/FundamentalDomain.lean,Mathlib/MeasureTheory/Group/Measure.lean |
3 |
1 |
['github-actions'] |
EtienneC30 assignee:EtienneC30 |
0-67145 18 hours ago |
14-27691 14 days ago |
14-27571 14 days |
| 41980 |
mcdoll author:mcdoll |
feat(Analysis): the generalized hypergeometric function |
We define the (regularized) generalized hypergeometric function and prove convergence in the cases `p < q + 1` and `p = q + 1`. This includes the Gaussian hypergeometric function (`p = 2` and `q = 1`) and the Bessel functions (`p = 0` and `q = 1`).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-analysis |
288/1 |
Mathlib.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Basic.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Beta.lean,Mathlib/Analysis/SpecialFunctions/Gamma/Deriv.lean,Mathlib/Analysis/SpecialFunctions/Hypergeometric.lean |
5 |
4 |
['github-actions', 'wwylele'] |
j-loreaux assignee:j-loreaux |
0-67144 18 hours ago |
4-62457 4 days ago |
4-62520 4 days |
| 42045 |
felixpernegger author:felixpernegger |
chore(NumberTheory): make an import private |
Proof of concept. The import is not redundant but can be made private.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-number-theory |
2/1 |
Mathlib/NumberTheory/FLT/Polynomial.lean |
1 |
4 |
['felixpernegger', 'github-actions', 'mathlib-bors'] |
MichaelStollBayreuth assignee:MichaelStollBayreuth |
0-67143 18 hours ago |
2-22170 2 days ago |
2-22059 2 days |
| 40983 |
khwilson author:khwilson |
feat: lemmas to support F-space open mapping theorem |
In order to generalize the Banach open mapping theorem to a generic F-space, we need several leamms about balanced and absorbent sets in more arbitrary spaces. In particular, we need some key lemmas such as:
- A closed absorbent set in a Baire space with countably generated cobounded filter has nonempty interior
- A topological vector space has a basis of neighborhoods about 0 consisting of balanced sets
AI Disclosure: Generated by Claude Code with specific prompts from me and edits by me.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
LLM-generated
|
126/11 |
Mathlib.lean,Mathlib/Analysis/LocallyConvex/AbsConvex.lean,Mathlib/Analysis/LocallyConvex/BalancedCoreHull.lean,Mathlib/Analysis/LocallyConvex/Basic.lean,Mathlib/Topology/Algebra/Group/Pointwise.lean,Mathlib/Topology/Baire/Absorbent.lean,Mathlib/Topology/Bornology/Absorbs.lean,Mathlib/Topology/MetricSpace/Bounded.lean |
8 |
3 |
['felixpernegger', 'github-actions', 'scholzhannah'] |
nobody |
0-66248 18 hours ago |
32-59021 32 days ago |
32-59147 32 days |
| 39913 |
mkaratarakis author:mkaratarakis |
feat(Combinatorics/Quiver): periodicity and aperiodicity |
cycle lengths, index of imprimitivity, and cyclic partitions for strongly connected quivers.
Part of the Perron–Frobenius formalization (with @or4nge19).
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
cc @or4nge19 for review |
t-combinatorics |
191/0 |
Mathlib.lean,Mathlib/Combinatorics/Quiver/Cyclic.lean |
2 |
2 |
['github-actions', 'or4nge19'] |
nobody |
0-66247 18 hours ago |
21-71878 21 days ago |
60-30548 60 days |
| 40389 |
YaelDillies author:YaelDillies |
feat(MeasureTheory): the average of a sum of functions |
and other basic lemmas about `average`
From MeanFourier
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-measure-probability
maintainer-merge
|
88/24 |
Mathlib/Analysis/Convex/Integral.lean,Mathlib/MeasureTheory/Integral/Average.lean |
2 |
7 |
['EtienneC30', 'YaelDillies', 'github-actions'] |
nobody |
0-66246 18 hours ago |
46-43495 46 days ago |
46-60377 46 days |
| 42101 |
DrDMT-VR author:DrDMT-VR |
feat(NumberTheory/LSeries): conjugation symmetry for the completed Riemann zeta function |
Adds conjugation symmetry for the completed Riemann zeta functions and for Deligne's archimedean
Gamma factor:
* `Complex.Gammaℝ_conj : Gammaℝ (conj s) = conj (Gammaℝ s)`
(`Mathlib/Analysis/SpecialFunctions/Gamma/Deligne.lean`)
* `completedRiemannZeta₀_conj : completedRiemannZeta₀ (conj s) = conj (completedRiemannZeta₀ s)`
* `completedRiemannZeta_conj : completedRiemannZeta (conj s) = conj (completedRiemannZeta s)`
(both in `Mathlib/NumberTheory/LSeries/RiemannZeta.lean`)
All three hold for **every** `s : ℂ`, with no points excluded — in particular no exclusion of the
poles `s = 0, 1` of `Λ`, since `Λ` is built from the entire function `Λ₀` by subtracting
`1 / s + 1 / (1 - s)` and Mathlib's `1 / 0 = 0` convention makes both sides agree there. They are
tagged `@[simp]`, matching the existing `riemannZeta_conj`.
### Why
Conjugation symmetry is a basic structural fact about `ζ` that Mathlib already has
(`riemannZeta_conj`, in `Mathlib/NumberTheory/Harmonic/ZetaAsymp.lean`), but the corresponding
statements for the completed functions `Λ`, `Λ₀` and for `Gammaℝ` were missing. The `Λ` version is
the one actually needed for work on the critical line: combined with the functional equation
`completedRiemannZeta_one_sub` it gives `conj (Λ ⟨1/2, t⟩) = Λ ⟨1/2, t⟩`, i.e. the Riemann
Ξ-function is real-valued on the critical line. It is also the natural form for completed
L-function arguments generally, where `Λ` rather than `ζ` is the object with the clean symmetry.
Note the `Λ` statements do **not** follow formally from `riemannZeta_conj`: the bridge
`riemannZeta_def_of_ne_zero` reads `ζ s = Λ s / Gammaℝ s`, and `Gammaℝ` vanishes at the trivial
zeros, so it cannot be inverted. The proof here instead runs the identity principle directly on the
entire function `Λ₀`.
### Proof
On the halfplane `1 < re s` the Dirichlet-series representation
`completedZeta_eq_tsum_of_one_lt_re` conjugates termwise (real coefficients), giving the result for
`Λ` and hence for `Λ₀` via `completedRiemannZeta_eq`. Since `Λ₀` is entire
(`differentiable_completedZeta₀`) and `conj ∘ Λ₀ ∘ conj` is entire by
`DifferentiableAt.conj_conj`, `AnalyticOnNhd.eq_of_eventuallyEq` propagates the identity from a
neighbourhood of `2` to all of `ℂ`. Transferring back through `completedRiemannZeta_eq` — which is
unconditional — yields `completedRiemannZeta_conj` with no side conditions.
### Drive-by
`riemannZeta_conj` in `Mathlib/NumberTheory/Harmonic/ZetaAsymp.lean` is golfed from ~25 lines to 4
by deriving it from `completedRiemannZeta_conj` and `Gammaℝ_conj` (statement, name and `@[simp]`
attribute unchanged); its two now-unused private imports are dropped. It no longer depends on
anything in `ZetaAsymp`, so it could reasonably be relocated to `RiemannZeta.lean` alongside the new
lemmas — happy to do that in this PR if reviewers prefer.
`Mathlib/NumberTheory/LSeries/RiemannZeta.lean` gains one import,
`Mathlib.Analysis.Calculus.Deriv.Star` (2 extra modules in the transitive closure).
### Checks
Built locally against master (`v4.33.0-rc1`): full `lake build Mathlib` completes with zero errors
and zero warnings; `lake exe lint-style` is clean on all three touched files. No `sorry`, no new
axioms.
This PR is standalone and independent of my other open PRs (#42093, #42095, #42100).
|
new-contributor |
92/30 |
Mathlib/Analysis/SpecialFunctions/Gamma/Deligne.lean,Mathlib/NumberTheory/Harmonic/ZetaAsymp.lean,Mathlib/NumberTheory/LSeries/RiemannZeta.lean |
3 |
2 |
['github-actions'] |
nobody |
0-61744 17 hours ago |
0-62335 17 hours ago |
0-62215 17 hours |
| 42088 |
acmepjz author:acmepjz |
fix(RingTheory/Ideal/Height): mem_minimalPrimes_of_height_eq should be mem_minimalPrimes_of_height_le |
According to the theorem statement and docstring, `Ideal.mem_minimalPrimes_of_height_eq` introduced in #21041 should be named `Ideal.mem_minimalPrimes_of_height_le`. This PR rename it and add a deprecated alias.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
t-algebra
easy
label:t-algebra$ |
8/5 |
Mathlib/RingTheory/Ideal/Height.lean,Mathlib/RingTheory/Ideal/KrullsHeightTheorem.lean |
2 |
1 |
['github-actions'] |
nobody |
0-44923 12 hours ago |
1-11016 1 day ago |
1-11035 1 day |
| 38334 |
8e7 author:8e7 |
feat(Combinatorics/SimpleGraph/TreeDecomp): define tree decompositions |
Add definition for tree decompositions on simple graphs. Define the tree width of a simple graph and prove basic statements and conversions.
```lean
structure TreeDecomp (G : SimpleGraph V) (W : Type) where
/-- The set of vertices in each bag. -/
bag : W → Finset V
/-- The graph adjacency relation of bags. -/
tree : SimpleGraph W
/-- T must be a tree. -/
isTree : IsTree tree
/-- All vertices in G must appear in some bag. -/
vertexCover : ∀ v : V, ∃ w : W, v ∈ bag w
/-- For any edge (u, v) in G, there is a bag containing both u and v. -/
edgeCover ⦃u v : V⦄ : G.Adj u v → ∃ w : W, u ∈ bag w ∧ v ∈ bag w
/-- For any vertex v in G, the set of bags that contain v is preconnected. -/
connectedBags : ∀ v : V, (tree.induce ({w | v ∈ bag w})).Preconnected
```
AI Usage: Some proofs are written with the help of Claude Code, and everything has been manually reviewed.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #38027
[](https://gitpod.io/from-referrer/)
|
new-contributor
t-combinatorics
LLM-generated
|
395/0 |
Mathlib.lean,Mathlib/Combinatorics/SimpleGraph/TreeDecomp.lean |
2 |
42 |
['8e7', 'SnirBroshi', 'YaelDillies', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
YaelDillies assignee:YaelDillies |
0-40499 11 hours ago |
0-54286 15 hours ago |
24-37501 24 days |
| 42104 |
vlad902 author:vlad902 |
feat(FreeGroup): `toWord` of multiplication by generators |
Add lemmas unfolding how left-/right- multiplication by a generator behaves on the `toWord` representation of a FreeGroup element, and derive two lemmas about the position of an element inside a multiplicatied word that I require later.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
62/0 |
Mathlib/Data/List/Basic.lean,Mathlib/GroupTheory/FreeGroup/Reduce.lean |
2 |
2 |
['github-actions', 'vlad902'] |
nobody |
0-36023 10 hours ago |
0-38861 10 hours ago |
0-38741 10 hours |
| 42105 |
vlad902 author:vlad902 |
feat(Subgroup/Center): maps of `Subgroup.center` |
Prove that that Monoid/Group isomorphisms map centers to centers.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
40/4 |
Mathlib/GroupTheory/Subgroup/Center.lean,Mathlib/GroupTheory/Submonoid/Center.lean |
2 |
1 |
['github-actions'] |
nobody |
0-35618 9 hours ago |
0-38354 10 hours ago |
0-38234 10 hours |
| 42106 |
vlad902 author:vlad902 |
feat(FreeGroup): `zpow` lemmas |
We already have some lemmas for working with `Nat`-valued powers of FreeGroup elements, add some matching lemmas for working with `Int`-valued powers.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
31/0 |
Mathlib/Algebra/Group/Basic.lean,Mathlib/GroupTheory/FreeGroup/Reduce.lean |
2 |
1 |
['github-actions'] |
nobody |
0-34952 9 hours ago |
0-38292 10 hours ago |
0-38172 10 hours |
| 41923 |
themathqueen author:themathqueen |
feat(Algebra): `IsUnital` and `IsNotUnital` classes |
This adds Prop-type classes on multiplicative types that state whether a unit exists or not. This shouldn't really be used unless it is the only reasonable way to phrase or prove a statement.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
This will be used in #36327.
Zulip thread: [#mathlib4 > `IsUnital` class](#narrow/channel/287929-mathlib4/topic/.60IsUnital.60.20class)
[](https://gitpod.io/from-referrer/)
|
t-algebra label:t-algebra$ |
183/0 |
Mathlib/Algebra/Algebra/Defs.lean,Mathlib/Algebra/Group/Defs.lean,Mathlib/Algebra/Ring/Defs.lean,Mathlib/Analysis/CStarAlgebra/Classes.lean,Mathlib/Analysis/Normed/Module/Basic.lean,Mathlib/Analysis/Normed/Ring/Basic.lean |
6 |
10 |
['SnirBroshi', 'github-actions', 'j-loreaux', 'themathqueen'] |
nobody |
0-33392 9 hours ago |
0-33443 9 hours ago |
6-45071 6 days |
| 39287 |
xgenereux author:xgenereux |
feat(Localization/AtPrime/Basic): upgrade `equivQuotMaximalIdeal` to an AlgEquiv |
The definition [IsLocalization.AtPrime.equivQuotMaximalIdealPow](https://leanprover-community.github.io/mathlib4_docs/Mathlib/RingTheory/Localization/AtPrime/Basic.html#IsLocalization.AtPrime.equivQuotMaximalIdealPow) was added in #36783.
The case with `n = 1` is still important and interesting. I have upgraded it to an AlgEquiv using `equivQuotMaximalIdealPow`.
This did break a few small things, because we need to bridge back to a `RingEquiv` in some places. I took the liberty to add some missing `apply` lemmas to ease fixing these proofs.
Disclaimer: I used Claude to suggest the first shot and refined it from there.
Co-authored-by: María Inés de Frutos Fernández <[mariaines.dff@gmail.com](mailto:mariaines.dff@gmail.com)>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
48/66 |
Mathlib/RingTheory/Localization/AtPrime/Basic.lean,Mathlib/RingTheory/Localization/AtPrime/Extension.lean,Mathlib/RingTheory/Trace/Quotient.lean |
3 |
4 |
['github-actions', 'mathlib-merge-conflicts', 'wwylele', 'xgenereux'] |
nobody |
0-32608 9 hours ago |
0-35963 9 hours ago |
48-60856 48 days |
| 37723 |
xgenereux author:xgenereux |
feat(Adjoin/Polynomial/Transcendental): Adjoining transcendental elements |
This PR establishes some basic properties about `A[y]` when `y` is transcendental over `A`. These are mostly just carried over from `A[X]`.
- Move `algEquivOfTranscendental` in the newly created file `Mathlib.RingTheory.Adjoin.Polynomial.Transcendental`
- Add `Algebra.adjoin.evalOfTranscendental`. This is technically very similar to `Algebra.adjoin.liftSingleton` but the definition is much simpler. It is also currently more general in the sense that it doesn't require `A` to be a field.
- Some basic instances from `Polynomial`. Note that these are actually theorems because of the hypothesis `(h : Transcendental R s)` everywhere. I've also added a `Fact` version to allow the possibility of instances.
Last note : I initially considered adding some results in `RingTheory.Polynomial.Quotient` where I golfed the file a tiny bit. I removed the unused results but kept the golf.
AI disclaimer : I used Claude to give me some feedback on the PR.
Co-authored-by: María Inés de Frutos Fernández <[mariaines.dff@gmail.com](mailto:mariaines.dff@gmail.com)>
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36439
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
167/69 |
Mathlib.lean,Mathlib/FieldTheory/RatFunc/AsPolynomial.lean,Mathlib/RingTheory/Adjoin/Polynomial/Basic.lean,Mathlib/RingTheory/Adjoin/Polynomial/Bivariate.lean,Mathlib/RingTheory/Adjoin/Polynomial/Transcendental.lean,Mathlib/RingTheory/Algebraic/Basic.lean,Mathlib/RingTheory/Polynomial/Quotient.lean |
7 |
6 |
['github-actions', 'leanprover-radar', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'riccardobrasca'] |
nobody |
0-30757 8 hours ago |
0-32152 8 hours ago |
42-79107 42 days |
| 42109 |
vlad902 author:vlad902 |
feat(GroupTheory/FreeGroup/IsFreeGroup): to_additive'ize file |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory |
77/8 |
Mathlib/GroupTheory/FreeGroup/IsFreeGroup.lean |
1 |
1 |
['github-actions'] |
nobody |
0-25524 7 hours ago |
0-26062 7 hours ago |
0-26440 7 hours |
| 42103 |
yoh-tanimoto author:yoh-tanimoto |
feat(MeasureTheory/VectorMeasure): prove finiteness of ComplexMeasure |
add the real and imaginary parts of a complex measure `μ` as complex measures, add instance `IsFiniteMeasure μ.variation`.
motivation: this is a part of the proof of the complex version of the RMK theorem.
I used Codex to find APIs. The final code is mostly written by me.
Co-authored-by: @oliver-butterley |
t-measure-probability |
99/0 |
Mathlib.lean,Mathlib/MeasureTheory/VectorMeasure/Basic.lean,Mathlib/MeasureTheory/VectorMeasure/Complex/Basic.lean,Mathlib/MeasureTheory/VectorMeasure/Variation/Basic.lean |
4 |
3 |
['CoolRmal', 'github-actions'] |
nobody |
0-22878 6 hours ago |
0-40824 11 hours ago |
0-40844 11 hours |
| 42085 |
felixpernegger author:felixpernegger |
chore: remove redundant `backward.inferInstanceAs.wrap.data` exception |
"Redundant" in the sense that `lake build` succeeds without it, so ought to be removable; especially since the exceptions are counted as strong tech debt.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
tech debt
label:t-algebra$ |
0/1 |
Mathlib/Algebra/Category/MonCat/Limits.lean |
1 |
3 |
['felixpernegger', 'github-actions', 'leanprover-radar'] |
nobody |
0-18075 5 hours ago |
1-17382 1 day ago |
1-17262 1 day |
| 42080 |
dkunert author:dkunert |
feat(Algebra/Order/Floor): add fract-absorption lemmas for sums and d… |
Add the four one-sided absorption lemmas for `Int.fract`
* `Int.fract_fract_add : fract (fract a + b) = fract (a + b)`
* `Int.fract_add_fract : fract (a + fract b) = fract (a + b)`
* `Int.fract_fract_sub : fract (fract a - b) = fract (a - b)`
* `Int.fract_sub_fract : fract (a - fract b) = fract (a - b)`
all tagged `@[simp]`, together with the two-sided combinations `Int.fract_fract_add_fract` and `Int.fract_fract_sub_fract` as derived corollaries (not `@[simp]`, since their LHS is already simplified by the one-sided lemmas).
Mathlib currently has the existence form (`Int.fract_add`), the inequalities (`Int.fract_add_le`, `Int.fract_add_fract_le`), and absorption equalities only for integer casts (the `Int.fract_add_intCast` family); the `fract`-absorbing equalities themselves were missing (closest relatives: `Int.fract_fract`, `Int.fract_eq_fract`). With the new `@[simp]` set, goals like `fract (fract x + fract y) = fract (x + y)` now close by `simp` — they did not before.
The one-sided factoring of the add lemmas was suggested by Eric Wieser on [Zulip](https://leanprover.zulipchat.com/#narrow/channel/217875-Is-there-code-for-X.3F/topic/Int.2Efract.20of.20a.20sum.2Fdifference.20reduced.20mod.201); the two-sided add corollary is the lemma his two suggestions "combine to give". The sub analogues and the `@[simp]` tagging follow the same pattern. Naming follows the file's `fract_add_intCast`/`fract_intCast_add` convention.
I used the Anthropic LLMs Opus 4.8 and Fable 5 via Claude Code and made the central design decisions. The LLMs produced all the lemmas and proofs. The four lemmas and the two corollaries are fully proved and break nothing in Mathlib. They conform to the style and simpNF conventions. I take responsibility for this contribution.
--- |
t-algebra
new-contributor
LLM-generated
label:t-algebra$ |
22/0 |
Mathlib/Algebra/Order/Floor/Ring.lean |
1 |
3 |
['dkunert', 'github-actions'] |
nobody |
0-17246 4 hours ago |
1-42689 1 day ago |
1-42569 1 day |
| 42112 |
NoahW314 author:NoahW314 |
chore(RingTheory): fix left/right convention on `Ideal.mul_le_{left,right}` |
Swap `Ideal.mul_le_left` and `Ideal.mul_le_right` so that they follow the left/right naming convention.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory |
50/50 |
Mathlib/RingTheory/AdicCompletion/Algebra.lean,Mathlib/RingTheory/DedekindDomain/Different.lean,Mathlib/RingTheory/DedekindDomain/Factorization.lean,Mathlib/RingTheory/DedekindDomain/Ideal/Lemmas.lean,Mathlib/RingTheory/DividedPowers/Basic.lean,Mathlib/RingTheory/DividedPowers/SubDPIdeal.lean,Mathlib/RingTheory/Extension/Basic.lean,Mathlib/RingTheory/Extension/Cotangent/Basis.lean,Mathlib/RingTheory/Finiteness/Ideal.lean,Mathlib/RingTheory/Finiteness/NilpotentKer.lean,Mathlib/RingTheory/Ideal/IsPrimary.lean,Mathlib/RingTheory/Ideal/Operations.lean,Mathlib/RingTheory/Ideal/Pure.lean,Mathlib/RingTheory/Ideal/Quotient/Operations.lean,Mathlib/RingTheory/Ideal/Quotient/PowTransition.lean,Mathlib/RingTheory/Kaehler/JacobiZariski.lean,Mathlib/RingTheory/PicardGroup.lean,Mathlib/RingTheory/Polynomial/ContentIdeal.lean,Mathlib/RingTheory/PrincipalIdealDomainOfPrime.lean,Mathlib/RingTheory/Smooth/Quotient.lean,Mathlib/RingTheory/Spectrum/Prime/Basic.lean |
21 |
1 |
['github-actions'] |
nobody |
0-15556 4 hours ago |
0-17341 4 hours ago |
0-17221 4 hours |
| 37910 |
wwylele author:wwylele |
feat(Geometry/Euclidean): volume of a simplex |
This defines the volume of a simplex in Euclidean geometry, and shows that it agrees with measure theory. It also adds the basic set of lemmas (base-and-height formula, reindex, positivity, map, and restrict). Further properties of the volume will be in future PRs.
Three new file s are introduced and organized in the following dependency chain:
Def.lean -> MeasureSimplex.Lean -> Basic.lean
The Def.lean file has the definition only. MeasureSimplex.lean pulls in measure theory. Basic.lean publicly imports Def.lean, and privately imports MeasureSimplex.lean. When a downstream file imports Basic.lean, the measure theory part is not exposed and all properties of the volume is provided.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #36018
[](https://gitpod.io/from-referrer/)
|
t-euclidean-geometry
t-measure-probability
|
313/0 |
Mathlib.lean,Mathlib/Geometry/Euclidean/Volume/Basic.lean,Mathlib/Geometry/Euclidean/Volume/Def.lean,Mathlib/Geometry/Euclidean/Volume/MeasureSimplex.lean,MathlibTest/positivity.lean |
5 |
11 |
['copilot-pull-request-reviewer', 'github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts'] |
kex-y assignee:kex-y |
0-15007 4 hours ago |
26-6714 26 days ago |
26-7067 26 days |
| 42110 |
Zeta-Wu author:Zeta-Wu |
feat: add path length for paths in pseudo emetric spaces |
This PR defines the length of a path in a `PseudoEMetricSpace` as its variation on the unit interval.
It proves the basic properties of path length:
- the endpoint distance is bounded by the length;
- the constant path has length zero;
- reversing a path preserves its length;
- concatenating two paths adds their lengths.
Main declarations:
- `Path.length`
- `Path.edist_le_length`
- `Path.length_refl`
- `Path.length_symm`
- `Path.length_trans`
This is intended as a first step toward a broader theory of rectifiable paths, including later results on invariance of length under reparametrization.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
new-contributor
|
249/0 |
Mathlib.lean,Mathlib/Topology/EMetricSpace/PathLength.lean |
2 |
2 |
['github-actions'] |
nobody |
0-14710 4 hours ago |
0-15408 4 hours ago |
0-16263 4 hours |
| 41962 |
juanjomadrigal author:juanjomadrigal |
feat(Counterexamples): the space ω₁ |
Introduce the `ω₁` ordinal space that, when given the order topology, may be used to build some nice counterexamples in general topology, namely
- A subspace of a paracompact space need not be paracompact
- The product of two normal spaces need not be normal
- A subspace of a normal space need not be normal
- A regular space need not be normal
This PR introduces the basic definitions and order-theoretic properties, in order to have a good set of tools to work with.
---
Subsequent commits / PRs would roughly cover:
- Topology definitions in that space
- Compactness (and non-compactness) properties
- Countability properties
- Non-metrizability
- Each of the properties above
[](https://gitpod.io/from-referrer/)
|
new-contributor |
158/0 |
Counterexamples.lean,Counterexamples/Omega1Space.lean |
2 |
22 |
['FrankieNC', 'felixpernegger', 'github-actions', 'juanjomadrigal', 'plp127', 'vihdzp'] |
nobody |
0-12642 3 hours ago |
4-37243 4 days ago |
5-79213 5 days |
| 42115 |
felixpernegger author:felixpernegger |
chore(Geometry): fix defs with underscores |
This PR deprecates all (6) defs with underscore in FieldTheory and renames it according to the naming convention.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-differential-geometry |
149/83 |
Mathlib/Geometry/Manifold/ChartedSpace.lean,Mathlib/Geometry/Manifold/IsManifold/Basic.lean,Mathlib/Geometry/Manifold/VectorBundle/CovariantDerivative/Basic.lean,Mathlib/Geometry/Manifold/VectorBundle/LocalFrame.lean,Mathlib/Geometry/Manifold/VectorBundle/Tensoriality.lean |
5 |
2 |
['felixpernegger', 'github-actions'] |
nobody |
0-11271 3 hours ago |
0-12616 3 hours ago |
0-12496 3 hours |
| 42043 |
bixbyr author:bixbyr |
feat(GroupTheory/SpecificGroups/Suzuki): define Suzuki groups |
Basic definition of the Suzuki groups $Sz(2^{2n+1})$ as a subgroup of $GL(4, GF(2^{2n+1}))$. This first commit only defines the Suzuki group and proves that it is a subgroup of $GL(4, GF(2^{2n+1}))$.
The convention was made to refer to the generators using descriptive names rather than as S(a,b) and W as is standard in group theory. For the same reason I called it suzukiGroup instead of Sz(n). I tried to be as concise as possible definitions such as unipotent instead of writing something like
```
def unipotent (a b : Fq n) : GL (Fin 4) (Fq n) := by
have h_det : (unipotentMatrix n a b).det = 1 := det_unipotentMatrix n a b
have h_det_is_unit : IsUnit (unipotentMatrix n a b).det := by
rw [h_det]
exact isUnit_one
have h_matrix_is_unit : IsUnit (unipotentMatrix n a b) :=
(isUnit_iff_isUnit_det (A := unipotentMatrix n a b)).mpr h_det_is_unit
exact h_matrix_is_unit.unit
```
Gemini 3.1 pro was used to write a rough draft of the definition, but it was then fully rewritten by hand. This was to get a feeling for the stages of first defining the matrices, then showing they were in GL_4.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-group-theory
new-contributor
|
92/0 |
Mathlib.lean,Mathlib/GroupTheory/SpecificGroups/Suzuki.lean |
2 |
8 |
['SnirBroshi', 'bixbyr', 'github-actions', 'vlad902', 'wwylele'] |
nobody |
0-10098 2 hours ago |
1-7992 1 day ago |
1-7872 1 day |
| 42113 |
LAC1213 author:LAC1213 |
feat(RingTheory/Noetherian): injective modules over a Noetherian ring… |
… surject onto localizations by powers of an element. [Hartshorne III.3.3]
Disclaimer: I used Claude to help me find the names of useful lemmas and definitions and explain lean errors to me.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-ring-theory
new-contributor
LLM-generated
|
144/0 |
Mathlib.lean,Mathlib/RingTheory/Noetherian/InjectiveModule.lean |
2 |
13 |
['NoahW314', 'github-actions'] |
nobody |
0-9157 2 hours ago |
0-13993 3 hours ago |
0-13873 3 hours |
| 40599 |
ChiCubed author:ChiCubed |
feat(LinearAlgebra): rank-nullity theorems for Submodule map/comap |
We show forms of the rank-nullity theorem involving `Submodule.map` and `Submodule.comap`. Together with `LinearMap.ker_comp` this provides a formula for the rank of the kernel of a composite (and, in finite dimensions at least, for the rank of the range).
---
I didn't explicitly write the aforementioned formula for rank ker (f ∘ g) since it is just `LinearMap.ker_comp` followed by `LinearMap.lift_rank_comap`, but perhaps it should be added for discoverability?
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-algebra
new-contributor
label:t-algebra$ |
58/13 |
Mathlib/Algebra/Module/Submodule/Ker.lean,Mathlib/Algebra/Module/Submodule/Map.lean,Mathlib/Algebra/Module/Submodule/Range.lean,Mathlib/LinearAlgebra/Dimension/RankNullity.lean |
4 |
9 |
['ChiCubed', 'github-actions', 'themathqueen', 'wwylele'] |
nobody |
0-7325 2 hours ago |
0-9543 2 hours ago |
42-8148 42 days |
| 34280 |
gasparattila author:gasparattila |
feat(Topology/Sets): local connectedness of `(Nonempty)Compacts` |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #34278
[](https://gitpod.io/from-referrer/)
|
t-topology |
67/0 |
Mathlib/Topology/Sets/VietorisTopology.lean |
1 |
7 |
['github-actions', 'mathlib-dependent-issues', 'mathlib-merge-conflicts', 'mathlib4-merge-conflict-bot'] |
nobody |
0-7242 2 hours ago |
0-7795 2 hours ago |
0-7955 2 hours |
| 42116 |
jyh author:jyh |
feat(Counterexamples): the Jacobian conjecture is false |
We verify that the Jacobian conjecture is false, using the 2026 counterexample of Levent Alpöge (crediting Akhil Mathew), which gives an explicit polynomial self-map of ℚ³ with Jacobian determinant −2 that is not injective. Hence it admits no polynomial (nor even set-theoretic) inverse.
The statement here is aligned with the formalization in google-deepmind/formal-conjectures PR [#4474](https://github.com/google-deepmind/formal-conjectures/pull/4474) (merged 2026-07-26). The correspondence is documented term-by-term in a comment block in this file. Both formalizations independently transcribe Alpöge's Theorem 3.1, which is why the polynomials coincide. The verification adapted here predates the FC disproof and was published independently at jyh/jacobian-verify. Here is the discussion on Zulip: https://leanprover.zulipchat.com/#narrow/channel/583339-AI-authored-projects/topic/Counterexample.20to.20the.20Jacobean.20conjecture
This contribution was developed in collaboration with Claude (Anthropic). The Lean code was written by Claude (Anthropic — Claude Code, with Opus and Fable models) working under my direction. I worked with Claude to align and verify the statement against FC. I reviewed every line and every design decision (the DecidableEq substitution, the CharZero retention, the transpose bridge, the ℚ-concretization) and I can defend each without assistance. |
LLM-generated
new-contributor
|
308/0 |
Counterexamples.lean,Counterexamples/JacobianConjecture.lean |
2 |
3 |
['github-actions', 'jyh'] |
nobody |
0-7062 1 hour ago |
0-7600 2 hours ago |
0-7480 2 hours |
| 42114 |
NoahW314 author:NoahW314 |
feat(Topology/Order/Basic): add `isOpen_Ioo'` |
This complements the existing `isOpen_Ioo`.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
t-topology
easy
|
4/0 |
Mathlib/Topology/Order/Basic.lean |
1 |
2 |
['NoahW314', 'github-actions'] |
nobody |
0-6462 1 hour ago |
0-12939 3 hours ago |
0-12819 3 hours |
| 41994 |
emilyriehl author:emilyriehl |
feat(CategoryTheory): initial object implies corepresentable |
If the category of elements of a covariant functor has an initial object, then the functor is corepresentable.
---
Last September I developed an autoformalization test to prove the theorem stated above and its converse, which is now in Mathlib, but was missing at the time. I used this to test AlphaProof, Gauss, and Harmonic.
Now that this benchmark is easily saturated, the full result should appear in mathlib. The formalization I have here was originally done by hand but was golfed by the models, I believe in this instance by Gauss. (My formalization was decomposed through a series of conceptual steps, while Gauss instead just proved the theorem directly without using the Yoneda lemma for instance.)
In my version, which uses lean4:v4.25.0-rc2, I have a proof also of the dual result, which breaks here with an error message I do not understand. I pushed this in the initial commit here and will reproduce the code below for discussion.
[](https://gitpod.io/from-referrer/)
|
t-category-theory |
54/5 |
Mathlib/CategoryTheory/Limits/Elements.lean |
1 |
20 |
['emilyriehl', 'github-actions', 'joelriou', 'robin-carlier'] |
nobody |
0-6132 1 hour ago |
0-11713 3 hours ago |
0-71421 19 hours |
| 41883 |
gasparattila author:gasparattila |
feat(Tactic/Translate): warn when adding a docstring to an existing declaration |
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
- [x] depends on: #41886
[](https://gitpod.io/from-referrer/)
|
t-meta |
62/12 |
Mathlib/Algebra/Free.lean,Mathlib/GroupTheory/GroupAction/MultiplePrimitivity.lean,Mathlib/Tactic/Translate/Core.lean,Mathlib/Topology/Algebra/ContinuousMonoidHom.lean,Mathlib/Topology/Algebra/OpenSubgroup.lean,MathlibTest/Attribute/ToAdditive/Basic.lean |
6 |
4 |
['JovanGerb', 'gasparattila', 'github-actions', 'mathlib-dependent-issues'] |
nobody |
0-2107 35 minutes ago |
0-2161 34 minutes ago |
0-17143 4 hours |
| 42094 |
TJHeeringa author:TJHeeringa |
chore: deprecate apply_eq_iff_eq_symm_apply |
`apply_eq_iff_eq_symm_apply` is `Iff.symm` of `eq_symm_apply`. This deprecates the former in favour of the latter.
---
Almost every `Equivlike` has the lemma `eq_symm_apply`. Some have the additional lemma `apply_eq_iff_eq_symm_apply`. In [#mathlib4 > `apply_eq_iff_symm_apply` and `eq_symm_apply ` duplicates?](https://leanprover.zulipchat.com/#narrow/channel/287929-mathlib4/topic/.60apply_eq_iff_symm_apply.60.20and.20.60eq_symm_apply.20.60.20duplicates.3F/with/612633039), it was concluded that we could deprecate the latter.
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
98/85 |
Mathlib/Algebra/BigOperators/Finsupp/Basic.lean,Mathlib/Algebra/Category/Grp/Adjunctions.lean,Mathlib/Algebra/Group/Action/Basic.lean,Mathlib/Algebra/Group/Equiv/Defs.lean,Mathlib/Algebra/Group/Units/Equiv.lean,Mathlib/Algebra/Lie/Basic.lean,Mathlib/Algebra/Lie/Extension.lean,Mathlib/Algebra/Lie/Submodule.lean,Mathlib/Algebra/Module/TransferInstance.lean,Mathlib/Algebra/Order/Hom/Monoid.lean,Mathlib/Algebra/Torsor/Defs.lean,Mathlib/Algebra/Tropical/Basic.lean,Mathlib/AlgebraicTopology/SimplicialSet/StdSimplex.lean,Mathlib/Analysis/Real/Sqrt.lean,Mathlib/CategoryTheory/FintypeCat.lean,Mathlib/CategoryTheory/Preadditive/Biproducts.lean,Mathlib/Combinatorics/SimpleGraph/Maps.lean,Mathlib/Combinatorics/SimpleGraph/Subgraph.lean,Mathlib/Data/DFinsupp/BigOperators.lean,Mathlib/Data/Fin/Tuple/Sort.lean,Mathlib/Data/Finsupp/Basic.lean,Mathlib/Data/Finsupp/Multiset.lean,Mathlib/Data/Finsupp/Option.lean,Mathlib/Data/Matrix/PEquiv.lean,Mathlib/Data/Opposite.lean,Mathlib/Data/ZMod/QuotientGroup.lean,Mathlib/FieldTheory/PolynomialGaloisGroup.lean,Mathlib/GroupTheory/Complement.lean,Mathlib/GroupTheory/CoprodI.lean,Mathlib/GroupTheory/Perm/ConjAct.lean,Mathlib/LinearAlgebra/AffineSpace/AffineEquiv.lean,Mathlib/LinearAlgebra/Matrix/Transvection.lean,Mathlib/LinearAlgebra/TensorProduct/Tower.lean,Mathlib/Logic/Basic.lean,Mathlib/Logic/Equiv/Defs.lean,Mathlib/Logic/Equiv/Fin/Basic.lean,Mathlib/Logic/Equiv/Option.lean,Mathlib/Logic/Equiv/Set.lean,Mathlib/NumberTheory/NumberField/Units/DirichletTheorem.lean,Mathlib/Order/Hom/Basic.lean,Mathlib/Order/RelIso/Basic.lean,Mathlib/Order/SymmDiff.lean,Mathlib/RingTheory/Perfection.lean,Mathlib/RingTheory/PicardGroup.lean,Mathlib/Topology/Algebra/AffineSubspace.lean,Mathlib/Topology/Algebra/ContinuousAffineEquiv.lean,Mathlib/Topology/Algebra/ContinuousMonoidHom.lean,Mathlib/Topology/ContinuousMap/ContinuousMapZero.lean,Mathlib/Topology/Covering/Quotient.lean,Mathlib/Topology/Instances/AddCircle/Defs.lean |
50 |
1 |
['github-actions'] |
nobody |
0-972 16 minutes ago |
0-4144 1 hour ago |
0-6585 1 hour |
| 42117 |
plp127 author:plp127 |
feat: locally compact left-uniform group is complete |
Prove that a locally compact left-uniform group is complete. We already have the theorem for right-uniform groups.
---
<!-- Your PR title will become the first line of the commit message.
In this box, the text above the `---` (if not empty) will be appended
to the commit message, and can be used to give additional context or
details. Please leave a blank newline before the `---`, otherwise GitHub
will format the text above it as a title.
For details on the "pull request lifecycle" in mathlib, please see:
https://leanprover-community.github.io/contribute/index.html
In particular, note that most reviewers will only notice your PR
if it passes the continuous integration checks.
Please ask for help on https://leanprover.zulipchat.com if needed.
When merging, all the commits will be squashed into a single commit
listing all co-authors.
Co-authors in the squash commit are gathered from two sources:
First, all authors of commits to this PR branch are included. Thus,
one way to add co-authors is to include at least one commit authored by
each co-author among the commits in the pull request. If necessary, you
may create empty commits to indicate co-authorship, using commands like so:
git commit --author="Author Name <author@email.com>" --allow-empty -m "add Author Name as coauthor"
Second, co-authors can also be listed in lines at the very bottom of
the commit message (that is, directly before the `---`) using the following format:
Co-authored-by: Author Name <author@email.com>
If you are moving or deleting declarations, please include these lines
at the bottom of the commit message (before the `---`, and also before
any "Co-authored-by" lines) using the following format:
Moves:
- Vector.* -> List.Vector.*
- ...
Deletions:
- Nat.bit1_add_bit1
- ...
Any other comments you want to keep out of the PR commit should go
below the `---`, and placed outside this HTML comment, or else they
will be invisible to reviewers.
If this PR depends on other PRs, please list them below this comment,
using the following format:
- [ ] depends on: #abc [optional extra text]
- [ ] depends on: #xyz [optional extra text]
-->
[](https://gitpod.io/from-referrer/)
|
|
26/4 |
Mathlib/Topology/Algebra/IsUniformGroup/Basic.lean |
1 |
0 |
[] |
nobody |
0-659 10 minutes ago |
0-659 8 minutes ago |
0-539 8 minutes |